diff options
| -rw-r--r-- | arch/arm/mach-ux500/Kconfig | 3 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/Makefile | 2 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/board-mop500-msp.c | 85 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/board-mop500-pins.c | 855 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/board-mop500.c | 83 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/board-mop500.h | 6 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/cpu-db8500.c | 1 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/devices-common.h | 12 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/pins.c | 88 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/pins.h | 46 | ||||
| -rw-r--r-- | arch/arm/plat-nomadik/include/plat/pincfg.h | 13 | ||||
| -rw-r--r-- | drivers/gpio/Makefile | 1 | ||||
| -rw-r--r-- | drivers/pinctrl/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/pinctrl/Makefile | 2 | ||||
| -rw-r--r-- | drivers/pinctrl/pinctrl-nomadik-db8500.c | 857 | ||||
| -rw-r--r-- | drivers/pinctrl/pinctrl-nomadik.c (renamed from drivers/gpio/gpio-nomadik.c) | 572 | ||||
| -rw-r--r-- | drivers/pinctrl/pinctrl-nomadik.h | 77 | ||||
| -rw-r--r-- | include/linux/pinctrl/pinctrl-state.h | 13 |
18 files changed, 2050 insertions, 676 deletions
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index ef7099e..4adb493 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -9,6 +9,8 @@ config UX500_SOC_COMMON select ARM_ERRATA_754322 select ARM_ERRATA_764369 select CACHE_L2X0 + select PINCTRL + select PINCTRL_NOMADIK config UX500_SOC_DB5500 bool @@ -20,6 +22,7 @@ config UX500_SOC_DB8500 select REGULATOR select REGULATOR_DB8500_PRCMU select CPU_FREQ_TABLE if CPU_FREQ + select PINCTRL_DB8500 menu "Ux500 target platform (boards)" diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile index 015932c..11729bc 100644 --- a/arch/arm/mach-ux500/Makefile +++ b/arch/arm/mach-ux500/Makefile @@ -3,7 +3,7 @@ # obj-y := clock.o cpu.o devices.o devices-common.o \ - id.o pins.o usb.o timer.o + id.o usb.o timer.o obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o obj-$(CONFIG_UX500_SOC_DB5500) += cpu-db5500.o dma-db5500.o obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o diff --git a/arch/arm/mach-ux500/board-mop500-msp.c b/arch/arm/mach-ux500/board-mop500-msp.c index c8f6300..9960480 100644 --- a/arch/arm/mach-ux500/board-mop500-msp.c +++ b/arch/arm/mach-ux500/board-mop500-msp.c @@ -7,17 +7,18 @@ #include <linux/platform_device.h> #include <linux/init.h> #include <linux/gpio.h> -#include <plat/gpio-nomadik.h> +#include <linux/pinctrl/consumer.h> +#include <plat/gpio-nomadik.h> #include <plat/pincfg.h> #include <plat/ste_dma40.h> #include <mach/devices.h> -#include <ste-dma40-db8500.h> #include <mach/hardware.h> #include <mach/irqs.h> #include <mach/msp.h> +#include "ste-dma40-db8500.h" #include "board-mop500.h" #include "devices-db8500.h" #include "pins-db8500.h" @@ -28,19 +29,10 @@ static DEFINE_SPINLOCK(msp_rxtx_lock); /* Reference Count */ static int msp_rxtx_ref; -static pin_cfg_t mop500_msp1_pins_init[] = { - GPIO33_MSP1_TXD | PIN_OUTPUT_LOW | PIN_SLPM_WAKEUP_DISABLE, - GPIO34_MSP1_TFS | PIN_INPUT_NOPULL | PIN_SLPM_WAKEUP_DISABLE, - GPIO35_MSP1_TCK | PIN_INPUT_NOPULL | PIN_SLPM_WAKEUP_DISABLE, - GPIO36_MSP1_RXD | PIN_INPUT_NOPULL | PIN_SLPM_WAKEUP_DISABLE, -}; - -static pin_cfg_t mop500_msp1_pins_exit[] = { - GPIO33_MSP1_TXD | PIN_OUTPUT_LOW | PIN_SLPM_WAKEUP_ENABLE, - GPIO34_MSP1_TFS | PIN_INPUT_NOPULL | PIN_SLPM_WAKEUP_ENABLE, - GPIO35_MSP1_TCK | PIN_INPUT_NOPULL | PIN_SLPM_WAKEUP_ENABLE, - GPIO36_MSP1_RXD | PIN_INPUT_NOPULL | PIN_SLPM_WAKEUP_ENABLE, -}; +/* Pin modes */ +struct pinctrl *msp1_p; +struct pinctrl_state *msp1_def; +struct pinctrl_state *msp1_sleep; int msp13_i2s_init(void) { @@ -48,9 +40,11 @@ int msp13_i2s_init(void) unsigned long flags; spin_lock_irqsave(&msp_rxtx_lock, flags); - if (msp_rxtx_ref == 0) - retval = nmk_config_pins( - ARRAY_AND_SIZE(mop500_msp1_pins_init)); + if (msp_rxtx_ref == 0 && !(IS_ERR(msp1_p) || IS_ERR(msp1_def))) { + retval = pinctrl_select_state(msp1_p, msp1_def); + if (retval) + pr_err("could not set MSP1 defstate\n"); + } if (!retval) msp_rxtx_ref++; spin_unlock_irqrestore(&msp_rxtx_lock, flags); @@ -66,9 +60,11 @@ int msp13_i2s_exit(void) spin_lock_irqsave(&msp_rxtx_lock, flags); WARN_ON(!msp_rxtx_ref); msp_rxtx_ref--; - if (msp_rxtx_ref == 0) - retval = nmk_config_pins_sleep( - ARRAY_AND_SIZE(mop500_msp1_pins_exit)); + if (msp_rxtx_ref == 0 && !(IS_ERR(msp1_p) || IS_ERR(msp1_sleep))) { + retval = pinctrl_select_state(msp1_p, msp1_sleep); + if (retval) + pr_err("could not set MSP1 sleepstate\n"); + } spin_unlock_irqrestore(&msp_rxtx_lock, flags); return retval; @@ -170,7 +166,8 @@ static struct stedma40_chan_cfg msp2_dma_tx = { /* data_width is set during configuration */ }; -static int db8500_add_msp_i2s(struct device *parent, int id, +static struct platform_device *db8500_add_msp_i2s(struct device *parent, + int id, resource_size_t base, int irq, struct msp_i2s_platform_data *pdata) { @@ -188,10 +185,10 @@ static int db8500_add_msp_i2s(struct device *parent, int id, if (!pdev) { pr_err("Failed to register platform-device 'ux500-msp-i2s.%d'!\n", id); - return -EIO; + return NULL; } - return 0; + return pdev; } /* Platform device for ASoC U8500 machine */ @@ -228,23 +225,43 @@ static struct msp_i2s_platform_data msp3_platform_data = { int mop500_msp_init(struct device *parent) { - int ret; + struct platform_device *msp1; pr_info("%s: Register platform-device 'snd-soc-u8500'.\n", __func__); platform_device_register(&snd_soc_u8500); pr_info("Initialize MSP I2S-devices.\n"); - ret = db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, - &msp0_platform_data); - ret |= db8500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1, - &msp1_platform_data); - ret |= db8500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2, - &msp2_platform_data); - ret |= db8500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, - &msp3_platform_data); + db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, + &msp0_platform_data); + msp1 = db8500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1, + &msp1_platform_data); + db8500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2, + &msp2_platform_data); + db8500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, + &msp3_platform_data); + + /* Get the pinctrl handle for MSP1 */ + if (msp1) { + msp1_p = pinctrl_get(&msp1->dev); + if (IS_ERR(msp1_p)) + dev_err(&msp1->dev, "could not get MSP1 pinctrl\n"); + else { + msp1_def = pinctrl_lookup_state(msp1_p, + PINCTRL_STATE_DEFAULT); + if (IS_ERR(msp1_def)) { + dev_err(&msp1->dev, + "could not get MSP1 defstate\n"); + } + msp1_sleep = pinctrl_lookup_state(msp1_p, + PINCTRL_STATE_SLEEP); + if (IS_ERR(msp1_sleep)) + dev_err(&msp1->dev, + "could not get MSP1 idlestate\n"); + } + } pr_info("%s: Register platform-device 'ux500-pcm'\n", __func__); platform_device_register(&ux500_pcm); - return ret; + return 0; } diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c index df5b190..32fd992 100644 --- a/arch/arm/mach-ux500/board-mop500-pins.c +++ b/arch/arm/mach-ux500/board-mop500-pins.c @@ -8,6 +8,7 @@ #include <linux/init.h> #include <linux/bug.h> #include <linux/string.h> +#include <linux/pinctrl/machine.h> #include <asm/mach-types.h> #include <plat/pincfg.h> @@ -16,7 +17,6 @@ #include <mach/hardware.h> #include "pins-db8500.h" -#include "pins.h" #include "board-mop500.h" enum custom_pin_cfg_t { @@ -26,399 +26,425 @@ enum custom_pin_cfg_t { static enum custom_pin_cfg_t pinsfor; -static pin_cfg_t mop500_pins_common[] = { - /* uMSP0 */ - GPIO12_MSP0_TXD, - GPIO13_MSP0_TFS, - GPIO14_MSP0_TCK, - GPIO15_MSP0_RXD, - - /* MSP2: HDMI */ - GPIO193_MSP2_TXD | PIN_INPUT_PULLDOWN, - GPIO194_MSP2_TCK | PIN_INPUT_PULLDOWN, - GPIO195_MSP2_TFS | PIN_INPUT_PULLDOWN, - GPIO196_MSP2_RXD | PIN_OUTPUT_LOW, - - /* LCD TE0 */ - GPIO68_LCD_VSI0 | PIN_INPUT_PULLUP, - - /* Touch screen INTERFACE */ - GPIO84_GPIO | PIN_INPUT_PULLUP, /* TOUCH_INT1 */ - - /* STMPE1601/tc35893 keypad IRQ */ - GPIO218_GPIO | PIN_INPUT_PULLUP, - - /* UART */ - /* uart-0 pins gpio configuration should be - * kept intact to prevent glitch in tx line - * when tty dev is opened. Later these pins +/* These simply sets bias for pins */ +#define BIAS(a,b) static unsigned long a[] = { b } + +BIAS(pd, PIN_PULL_DOWN); +BIAS(slpm_gpio_nopull, PIN_SLPM_GPIO|PIN_SLPM_INPUT_NOPULL); +BIAS(in_nopull, PIN_INPUT_NOPULL); +BIAS(in_nopull_sleep_nowkup, PIN_INPUT_NOPULL|PIN_SLPM_WAKEUP_DISABLE); +BIAS(in_pu, PIN_INPUT_PULLUP); +BIAS(in_pd, PIN_INPUT_PULLDOWN); +BIAS(in_pd_slpm_in_pu, PIN_INPUT_PULLDOWN|PIN_SLPM_INPUT_PULLUP); +BIAS(in_pu_slpm_out_lo, PIN_INPUT_PULLUP|PIN_SLPM_OUTPUT_LOW); +BIAS(out_hi, PIN_OUTPUT_HIGH); +BIAS(out_lo, PIN_OUTPUT_LOW); +BIAS(out_lo_sleep_nowkup, PIN_OUTPUT_LOW|PIN_SLPM_WAKEUP_DISABLE); +/* These also force them into GPIO mode */ +BIAS(gpio_in_pu, PIN_INPUT_PULLUP|PIN_GPIOMODE_ENABLED); +BIAS(gpio_in_pd, PIN_INPUT_PULLDOWN|PIN_GPIOMODE_ENABLED); +BIAS(gpio_in_pu_slpm_gpio_nopull, PIN_INPUT_PULLUP|PIN_GPIOMODE_ENABLED|PIN_SLPM_GPIO|PIN_SLPM_INPUT_NOPULL); +BIAS(gpio_in_pd_slpm_gpio_nopull, PIN_INPUT_PULLDOWN|PIN_GPIOMODE_ENABLED|PIN_SLPM_GPIO|PIN_SLPM_INPUT_NOPULL); +BIAS(gpio_out_hi, PIN_OUTPUT_HIGH|PIN_GPIOMODE_ENABLED); +BIAS(gpio_out_lo, PIN_OUTPUT_LOW|PIN_GPIOMODE_ENABLED); +/* Sleep modes */ +BIAS(sleep_in_wkup_pdis, PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); +BIAS(sleep_in_nopull_wkup, PIN_INPUT_NOPULL|PIN_SLPM_WAKEUP_ENABLE); +BIAS(sleep_out_hi_wkup_pdis, PIN_SLPM_OUTPUT_HIGH|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); +BIAS(sleep_out_lo_wkup, PIN_OUTPUT_LOW|PIN_SLPM_WAKEUP_ENABLE); +BIAS(sleep_out_wkup_pdis, PIN_SLPM_DIR_OUTPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); + +/* We use these to define hog settings that are always done on boot */ +#define DB8500_MUX_HOG(group,func) \ + PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-db8500", group, func) +#define DB8500_PIN_HOG(pin,conf) \ + PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-db8500", pin, conf) + +/* These are default states associated with device and changed runtime */ +#define DB8500_MUX(group,func,dev) \ + PIN_MAP_MUX_GROUP_DEFAULT(dev, "pinctrl-db8500", group, func) +#define DB8500_PIN(pin,conf,dev) \ + PIN_MAP_CONFIGS_PIN_DEFAULT(dev, "pinctrl-db8500", pin, conf) + +#define DB8500_PIN_SLEEP(pin,conf,dev) \ + PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_SLEEP, "pinctrl-db8500", \ + pin, conf) + +/* Pin control settings */ +static struct pinctrl_map __initdata mop500_family_pinmap[] = { + /* + * uMSP0, mux in 4 pins, regular placement of RX/TX + * explicitly set the pins to no pull + */ + DB8500_MUX_HOG("msp0txrx_a_1", "msp0"), + DB8500_MUX_HOG("msp0tfstck_a_1", "msp0"), + DB8500_PIN_HOG("GPIO12_AC4", in_nopull), /* TXD */ + DB8500_PIN_HOG("GPIO15_AC3", in_nopull), /* RXD */ + DB8500_PIN_HOG("GPIO13_AF3", in_nopull), /* TFS */ + DB8500_PIN_HOG("GPIO14_AE3", in_nopull), /* TCK */ + /* MSP2 for HDMI, pull down TXD, TCK, TFS */ + DB8500_MUX_HOG("msp2_a_1", "msp2"), + DB8500_PIN_HOG("GPIO193_AH27", in_pd), /* TXD */ + DB8500_PIN_HOG("GPIO194_AF27", in_pd), /* TCK */ + DB8500_PIN_HOG("GPIO195_AG28", in_pd), /* TFS */ + DB8500_PIN_HOG("GPIO196_AG26", out_lo), /* RXD */ + /* + * LCD, set TE0 (using LCD VSI0) and D14 (touch screen interrupt) to + * pull-up + * TODO: is this really correct? Snowball doesn't have a LCD. + */ + DB8500_MUX_HOG("lcdvsi0_a_1", "lcd"), + DB8500_PIN_HOG("GPIO68_E1", in_pu), + DB8500_PIN_HOG("GPIO84_C2", gpio_in_pu), + /* + * STMPE1601/tc35893 keypad IRQ GPIO 218 + * TODO: set for snowball and HREF really?? + */ + DB8500_PIN_HOG("GPIO218_AH11", gpio_in_pu), + /* + * UART0, we do not mux in u0 here. + * uart-0 pins gpio configuration should be kept intact to prevent + * a glitch in tx line when the tty dev is opened. Later these pins * are configured to uart mop500_pins_uart0 - * - * It will be replaced with uart configuration - * once the issue is solved. */ - GPIO0_GPIO | PIN_INPUT_PULLUP, - GPIO1_GPIO | PIN_OUTPUT_HIGH, - GPIO2_GPIO | PIN_INPUT_PULLUP, - GPIO3_GPIO | PIN_OUTPUT_HIGH, - - GPIO29_U2_RXD | PIN_INPUT_PULLUP, - GPIO30_U2_TXD | PIN_OUTPUT_HIGH, - GPIO31_U2_CTSn | PIN_INPUT_PULLUP, - GPIO32_U2_RTSn | PIN_OUTPUT_HIGH, + DB8500_PIN_HOG("GPIO0_AJ5", in_pu), /* CTS */ + DB8500_PIN_HOG("GPIO1_AJ3", out_hi), /* RTS */ + DB8500_PIN_HOG("GPIO2_AH4", in_pu), /* RXD */ + DB8500_PIN_HOG("GPIO3_AH3", out_hi), /* TXD */ + /* + * Mux in UART2 on altfunction C and set pull-ups. + * TODO: is this used on U8500 variants and Snowball really? + * The setting on GPIO31 conflicts with magnetometer use on hrefv60 + */ + DB8500_MUX_HOG("u2rxtx_c_1", "u2"), + DB8500_MUX_HOG("u2ctsrts_c_1", "u2"), + DB8500_PIN_HOG("GPIO29_W2", in_pu), /* RXD */ + DB8500_PIN_HOG("GPIO30_W3", out_hi), /* TXD */ + DB8500_PIN_HOG("GPIO31_V3", in_pu), /* CTS */ + DB8500_PIN_HOG("GPIO32_V2", out_hi), /* RTS */ + /* + * The following pin sets were known as "runtime pins" before being + * converted to the pinctrl model. Here we model them as "default" + * states. + */ + /* Mux in UART0 after initialization */ + DB8500_MUX("u0_a_1", "u0", "uart0"), + DB8500_PIN("GPIO0_AJ5", in_pu, "uart0"), /* CTS */ + DB8500_PIN("GPIO1_AJ3", out_hi, "uart0"), /* RTS */ + DB8500_PIN("GPIO2_AH4", in_pu, "uart0"), /* RXD */ + DB8500_PIN("GPIO3_AH3", out_hi, "uart0"), /* TXD */ + /* UART0 sleep state */ + DB8500_PIN_SLEEP("GPIO0_AJ5", sleep_in_wkup_pdis, "uart0"), + DB8500_PIN_SLEEP("GPIO1_AJ3", sleep_out_hi_wkup_pdis, "uart0"), + DB8500_PIN_SLEEP("GPIO2_AH4", sleep_in_wkup_pdis, "uart0"), + DB8500_PIN_SLEEP("GPIO3_AH3", sleep_out_wkup_pdis, "uart0"), + /* MSP1 for ALSA codec */ + DB8500_MUX("msp1txrx_a_1", "msp1", "ux500-msp-i2s.1"), + DB8500_MUX("msp1_a_1", "msp1", "ux500-msp-i2s.1"), + DB8500_PIN("GPIO33_AF2", out_lo_sleep_nowkup, "ux500-msp-i2s.1"), + DB8500_PIN("GPIO34_AE1", in_nopull_sleep_nowkup, "ux500-msp-i2s.1"), + DB8500_PIN("GPIO35_AE2", in_nopull_sleep_nowkup, "ux500-msp-i2s.1"), + DB8500_PIN("GPIO36_AG2", in_nopull_sleep_nowkup, "ux500-msp-i2s.1"), + /* MSP1 sleep state */ + DB8500_PIN_SLEEP("GPIO33_AF2", sleep_out_lo_wkup, "ux500-msp-i2s.1"), + DB8500_PIN_SLEEP("GPIO34_AE1", sleep_in_nopull_wkup, "ux500-msp-i2s.1"), + DB8500_PIN_SLEEP("GPIO35_AE2", sleep_in_nopull_wkup, "ux500-msp-i2s.1"), + DB8500_PIN_SLEEP("GPIO36_AG2", sleep_in_nopull_wkup, "ux500-msp-i2s.1"), + /* Mux in LCD data lines 8 thru 11 and LCDA CLK for MCDE TVOUT */ + DB8500_MUX("lcd_d8_d11_a_1", "lcd", "mcde-tvout"), + DB8500_MUX("lcdaclk_b_1", "lcda", "mcde-tvout"), + /* Mux in LCD VSI1 and pull it up for MCDE HDMI output */ + DB8500_MUX("lcdvsi1_a_1", "lcd", "av8100-hdmi"), + /* Mux in I2C blocks, put pins into GPIO in sleepmode no pull-up */ + DB8500_MUX("i2c0_a_1", "i2c0", "nmk-i2c.0"), + DB8500_PIN("GPIO147_C15", slpm_gpio_nopull, "nmk-i2c.0"), + DB8500_PIN("GPIO148_B16", slpm_gpio_nopull, "nmk-i2c.0"), + DB8500_MUX("i2c1_b_2", "i2c1", "nmk-i2c.1"), + DB8500_PIN("GPIO16_AD3", slpm_gpio_nopull, "nmk-i2c.1"), + DB8500_PIN("GPIO17_AD4", slpm_gpio_nopull, "nmk-i2c.1"), + DB8500_MUX("i2c2_b_2", "i2c2", "nmk-i2c.2"), + DB8500_PIN("GPIO10_AF5", slpm_gpio_nopull, "nmk-i2c.2"), + DB8500_PIN("GPIO11_AG4", slpm_gpio_nopull, "nmk-i2c.2"), + DB8500_MUX("i2c3_c_2", "i2c3", "nmk-i2c.3"), + DB8500_PIN("GPIO229_AG7", slpm_gpio_nopull, "nmk-i2c.3"), + DB8500_PIN("GPIO230_AF7", slpm_gpio_nopull, "nmk-i2c.3"), + /* Mux in SDI0 (here called MC0) used for removable MMC/SD/SDIO cards */ + DB8500_MUX("mc0_a_1", "mc0", "sdi0"), + DB8500_PIN("GPIO18_AC2", out_hi, "sdi0"), /* CMDDIR */ + DB8500_PIN("GPIO19_AC1", out_hi, "sdi0"), /* DAT0DIR */ + DB8500_PIN("GPIO20_AB4", out_hi, "sdi0"), /* DAT2DIR */ + DB8500_PIN("GPIO22_AA3", in_nopull, "sdi0"), /* FBCLK */ + DB8500_PIN("GPIO23_AA4", out_lo, "sdi0"), /* CLK */ + DB8500_PIN("GPIO24_AB2", in_pu, "sdi0"), /* CMD */ + DB8500_PIN("GPIO25_Y4", in_pu, "sdi0"), /* DAT0 */ + DB8500_PIN("GPIO26_Y2", in_pu, "sdi0"), /* DAT1 */ + DB8500_PIN("GPIO27_AA2", in_pu, "sdi0"), /* DAT2 */ + DB8500_PIN("GPIO28_AA1", in_pu, "sdi0"), /* DAT3 */ + /* Mux in SDI1 (here called MC1) used for SDIO for CW1200 WLAN */ + DB8500_MUX("mc1_a_1", "mc1", "sdi1"), + DB8500_PIN("GPIO208_AH16", out_lo, "sdi1"), /* CLK */ + DB8500_PIN("GPIO209_AG15", in_nopull, "sdi1"), /* FBCLK */ + DB8500_PIN("GPIO210_AJ15", in_pu, "sdi1"), /* CMD */ + DB8500_PIN("GPIO211_AG14", in_pu, "sdi1"), /* DAT0 */ + DB8500_PIN("GPIO212_AF13", in_pu, "sdi1"), /* DAT1 */ + DB8500_PIN("GPIO213_AG13", in_pu, "sdi1"), /* DAT2 */ + DB8500_PIN("GPIO214_AH15", in_pu, "sdi1"), /* DAT3 */ + /* Mux in SDI2 (here called MC2) used for for PoP eMMC */ + DB8500_MUX("mc2_a_1", "mc2", "sdi2"), + DB8500_PIN("GPIO128_A5", out_lo, "sdi2"), /* CLK */ + DB8500_PIN("GPIO129_B4", in_pu, "sdi2"), /* CMD */ + DB8500_PIN("GPIO130_C8", in_nopull, "sdi2"), /* FBCLK */ + DB8500_PIN("GPIO131_A12", in_pu, "sdi2"), /* DAT0 */ + DB8500_PIN("GPIO132_C10", in_pu, "sdi2"), /* DAT1 */ + DB8500_PIN("GPIO133_B10", in_pu, "sdi2"), /* DAT2 */ + DB8500_PIN("GPIO134_B9", in_pu, "sdi2"), /* DAT3 */ + DB8500_PIN("GPIO135_A9", in_pu, "sdi2"), /* DAT4 */ + DB8500_PIN("GPIO136_C7", in_pu, "sdi2"), /* DAT5 */ + DB8500_PIN("GPIO137_A7", in_pu, "sdi2"), /* DAT6 */ + DB8500_PIN("GPIO138_C5", in_pu, "sdi2"), /* DAT7 */ + /* Mux in SDI4 (here called MC4) used for for PCB-mounted eMMC */ + DB8500_MUX("mc4_a_1", "mc4", "sdi4"), + DB8500_PIN("GPIO197_AH24", in_pu, "sdi4"), /* DAT3 */ + DB8500_PIN("GPIO198_AG25", in_pu, "sdi4"), /* DAT2 */ + DB8500_PIN("GPIO199_AH23", in_pu, "sdi4"), /* DAT1 */ + DB8500_PIN("GPIO200_AH26", in_pu, "sdi4"), /* DAT0 */ + DB8500_PIN("GPIO201_AF24", in_pu, "sdi4"), /* CMD */ + DB8500_PIN("GPIO202_AF25", in_nopull, "sdi4"), /* FBCLK */ + DB8500_PIN("GPIO203_AE23", out_lo, "sdi4"), /* CLK */ + DB8500_PIN("GPIO204_AF23", in_pu, "sdi4"), /* DAT7 */ + DB8500_PIN("GPIO205_AG23", in_pu, "sdi4"), /* DAT6 */ + DB8500_PIN("GPIO206_AG24", in_pu, "sdi4"), /* DAT5 */ + DB8500_PIN("GPIO207_AJ23", in_pu, "sdi4"), /* DAT4 */ + /* Mux in USB pins, drive STP high */ + DB8500_MUX("usb_a_1", "usb", "musb-ux500.0"), + DB8500_PIN("GPIO257_AE29", out_hi, "musb-ux500.0"), /* STP */ + /* Mux in SPI2 pins on the "other C1" altfunction */ + DB8500_MUX("spi2_oc1_1", "spi2", "spi2"), + DB8500_PIN("GPIO216_AG12", gpio_out_hi, "spi2"), /* FRM */ + DB8500_PIN("GPIO218_AH11", in_pd, "spi2"), /* RXD */ + DB8500_PIN("GPIO215_AH13", out_lo, "spi2"), /* TXD */ + DB8500_PIN("GPIO217_AH12", out_lo, "spi2"), /* CLK */ }; -static pin_cfg_t mop500_pins_default[] = { - /* SSP0 */ - GPIO143_SSP0_CLK, - GPIO144_SSP0_FRM, - GPIO145_SSP0_RXD | PIN_PULL_DOWN, - GPIO146_SSP0_TXD, - - /* XENON Flashgun INTERFACE */ - GPIO6_IP_GPIO0 | PIN_INPUT_PULLUP,/* XENON_FLASH_ID */ - GPIO7_IP_GPIO1 | PIN_INPUT_PULLUP,/* XENON_READY */ - - GPIO217_GPIO | PIN_INPUT_PULLUP, /* TC35892 IRQ */ - - /* sdi0 (removable MMC/SD/SDIO cards) not handled by pm_runtime */ - GPIO21_MC0_DAT31DIR | PIN_OUTPUT_HIGH, - - /* UART */ - GPIO4_U1_RXD | PIN_INPUT_PULLUP, - GPIO5_U1_TXD | PIN_OUTPUT_HIGH, - GPIO6_U1_CTSn | PIN_INPUT_PULLUP, - GPIO7_U1_RTSn | PIN_OUTPUT_HIGH, +/* + * These are specifically for the MOP500 and HREFP (pre-v60) version of the + * board, which utilized a TC35892 GPIO expander instead of using a lot of + * on-chip pins as the HREFv60 and later does. + */ +static struct pinctrl_map __initdata mop500_pinmap[] = { + /* Mux in SSP0, pull down RXD pin */ + DB8500_MUX_HOG("ssp0_a_1", "ssp0"), + DB8500_PIN_HOG("GPIO145_C13", pd), + /* + * XENON Flashgun on image processor GPIO (controlled from image + * processor firmware), mux in these image processor GPIO lines 0 + * (XENON_FLASH_ID) and 1 (XENON_READY) on altfunction C and pull up + * the pins. + */ + DB8500_MUX_HOG("ipgpio0_c_1", "ipgpio"), + DB8500_MUX_HOG("ipgpio1_c_1", "ipgpio"), + DB8500_PIN_HOG("GPIO6_AF6", in_pu), + DB8500_PIN_HOG("GPIO7_AG5", in_pu), + /* TC35892 IRQ, pull up the line, let the driver mux in the pin */ + DB8500_PIN_HOG("GPIO217_AH12", gpio_in_pu), + /* Mux in UART1 and set the pull-ups */ + DB8500_MUX_HOG("u1rxtx_a_1", "u1"), + DB8500_MUX_HOG("u1ctsrts_a_1", "u1"), + DB8500_PIN_HOG("GPIO4_AH6", in_pu), /* RXD */ + DB8500_PIN_HOG("GPIO5_AG6", out_hi), /* TXD */ + DB8500_PIN_HOG("GPIO6_AF6", in_pu), /* CTS */ + DB8500_PIN_HOG("GPIO7_AG5", out_hi), /* RTS */ + /* + * Runtime stuff: make it possible to mux in the SKE keypad + * and bias the pins + */ + DB8500_MUX("kp_a_2", "kp", "ske"), + DB8500_PIN("GPIO153_B17", in_pd_slpm_in_pu, "ske"), /* I7 */ + DB8500_PIN("GPIO154_C16", in_pd_slpm_in_pu, "ske"), /* I6 */ + DB8500_PIN("GPIO155_C19", in_pd_slpm_in_pu, "ske"), /* I5 */ + DB8500_PIN("GPIO156_C17", in_pd_slpm_in_pu, "ske"), /* I4 */ + DB8500_PIN("GPIO161_D21", in_pd_slpm_in_pu, "ske"), /* I3 */ + DB8500_PIN("GPIO162_D20", in_pd_slpm_in_pu, "ske"), /* I2 */ + DB8500_PIN("GPIO163_C20", in_pd_slpm_in_pu, "ske"), /* I1 */ + DB8500_PIN("GPIO164_B21", in_pd_slpm_in_pu, "ske"), /* I0 */ + DB8500_PIN("GPIO157_A18", in_pu_slpm_out_lo, "ske"), /* O7 */ + DB8500_PIN("GPIO158_C18", in_pu_slpm_out_lo, "ske"), /* O6 */ + DB8500_PIN("GPIO159_B19", in_pu_slpm_out_lo, "ske"), /* O5 */ + DB8500_PIN("GPIO160_B20", in_pu_slpm_out_lo, "ske"), /* O4 */ + DB8500_PIN("GPIO165_C21", in_pu_slpm_out_lo, "ske"), /* O3 */ + DB8500_PIN("GPIO166_A22", in_pu_slpm_out_lo, "ske"), /* O2 */ + DB8500_PIN("GPIO167_B24", in_pu_slpm_out_lo, "ske"), /* O1 */ + DB8500_PIN("GPIO168_C22", in_pu_slpm_out_lo, "ske"), /* O0 */ + /* Mux in and drive the SDI0 DAT31DIR line high at runtime */ + DB8500_MUX("mc0dat31dir_a_1", "mc0", "sdi0"), + DB8500_PIN("GPIO21_AB3", out_hi, "sdi0"), }; -static pin_cfg_t hrefv60_pins[] = { - /* WLAN */ - GPIO85_GPIO | PIN_OUTPUT_LOW,/* WLAN_ENA */ - - /* XENON Flashgun INTERFACE */ - GPIO6_IP_GPIO0 | PIN_INPUT_PULLUP,/* XENON_FLASH_ID */ - GPIO7_IP_GPIO1 | PIN_INPUT_PULLUP,/* XENON_READY */ - - /* Assistant LED INTERFACE */ - GPIO21_GPIO | PIN_OUTPUT_LOW, /* XENON_EN1 */ - GPIO64_IP_GPIO4 | PIN_OUTPUT_LOW, /* XENON_EN2 */ - - /* Magnetometer */ - GPIO31_GPIO | PIN_INPUT_PULLUP, /* magnetometer_INT */ - GPIO32_GPIO | PIN_INPUT_PULLDOWN, /* Magnetometer DRDY */ - - /* Display Interface */ - GPIO65_GPIO | PIN_OUTPUT_HIGH, /* DISP1 NO RST */ - GPIO66_GPIO | PIN_OUTPUT_LOW, /* DISP2 RST */ - - /* Touch screen INTERFACE */ - GPIO143_GPIO | PIN_OUTPUT_LOW,/*TOUCH_RST1 */ - - /* Touch screen INTERFACE 2 */ - GPIO67_GPIO | PIN_INPUT_PULLUP, /* TOUCH_INT2 */ - GPIO146_GPIO | PIN_OUTPUT_LOW,/*TOUCH_RST2 */ - - /* ETM_PTM_TRACE INTERFACE */ - GPIO70_GPIO | PIN_OUTPUT_LOW,/* ETM_PTM_DATA23 */ - GPIO71_GPIO | PIN_OUTPUT_LOW,/* ETM_PTM_DATA22 */ - GPIO72_GPIO | PIN_OUTPUT_LOW,/* ETM_PTM_DATA21 */ - GPIO73_GPIO | PIN_OUTPUT_LOW,/* ETM_PTM_DATA20 */ - GPIO74_GPIO | PIN_OUTPUT_LOW,/* ETM_PTM_DATA19 */ - - /* NAHJ INTERFACE */ - GPIO76_GPIO | PIN_OUTPUT_LOW,/* NAHJ_CTRL */ - GPIO216_GPIO | PIN_OUTPUT_HIGH,/* NAHJ_CTRL_INV */ - - /* NFC INTERFACE */ - GPIO77_GPIO | PIN_OUTPUT_LOW, /* NFC_ENA */ - GPIO144_GPIO | PIN_INPUT_PULLDOWN, /* NFC_IRQ */ - GPIO142_GPIO | PIN_OUTPUT_LOW, /* NFC_RESET */ - - /* Keyboard MATRIX INTERFACE */ - GPIO90_MC5_CMD | PIN_OUTPUT_LOW, /* KP_O_1 */ - GPIO87_MC5_DAT1 | PIN_OUTPUT_LOW, /* KP_O_2 */ - GPIO86_MC5_DAT0 | PIN_OUTPUT_LOW, /* KP_O_3 */ - GPIO96_KP_O6 | PIN_OUTPUT_LOW, /* KP_O_6 */ - GPIO94_KP_O7 | PIN_OUTPUT_LOW, /* KP_O_7 */ - GPIO93_MC5_DAT4 | PIN_INPUT_PULLUP, /* KP_I_0 */ - GPIO89_MC5_DAT3 | PIN_INPUT_PULLUP, /* KP_I_2 */ - GPIO88_MC5_DAT2 | PIN_INPUT_PULLUP, /* KP_I_3 */ - GPIO91_GPIO | PIN_INPUT_PULLUP, /* FORCE_SENSING_INT */ - GPIO92_GPIO | PIN_OUTPUT_LOW, /* FORCE_SENSING_RST */ - GPIO97_GPIO | PIN_OUTPUT_LOW, /* FORCE_SENSING_WU */ - - /* DiPro Sensor Interface */ - GPIO139_GPIO | PIN_INPUT_PULLUP, /* DIPRO_INT */ - - /* Audio Amplifier Interface */ - GPIO149_GPIO | PIN_OUTPUT_HIGH, /* VAUDIO_HF_EN, enable MAX8968 */ - - /* GBF INTERFACE */ - GPIO171_GPIO | PIN_OUTPUT_LOW, /* GBF_ENA_RESET */ - - /* MSP : HDTV INTERFACE */ - GPIO192_GPIO | PIN_INPUT_PULLDOWN, - - /* ACCELEROMETER_INTERFACE */ - GPIO82_GPIO | PIN_INPUT_PULLUP, /* ACC_INT1 */ - GPIO83_GPIO | PIN_INPUT_PULLUP, /* ACC_INT2 */ - - /* SD card detect */ - GPIO95_GPIO | PIN_INPUT_PULLUP, +/* + * The HREFv60 series of platforms is using available pins on the DB8500 + * insteaf of the Toshiba I2C GPIO expander, reusing some pins like the SSP0 + * and SSP1 ports (previously connected to the AB8500) as generic GPIO lines. + */ +static struct pinctrl_map __initdata hrefv60_pinmap[] = { + /* Drive WLAN_ENA low */ + DB8500_PIN_HOG("GPIO85_D5", gpio_out_lo), /* WLAN_ENA */ + /* + * XENON Flashgun on image processor GPIO (controlled from image + * processor firmware), mux in these image processor GPIO lines 0 + * (XENON_FLASH_ID), 1 (XENON_READY) and there is an assistant + * LED on IP GPIO 4 (XENON_EN2) on altfunction C, that need bias + * from GPIO21 so pull up 0, 1 and drive 4 and GPIO21 low as output. + */ + DB8500_MUX_HOG("ipgpio0_c_1", "ipgpio"), + DB8500_MUX_HOG("ipgpio1_c_1", "ipgpio"), + DB8500_MUX_HOG("ipgpio4_c_1", "ipgpio"), + DB8500_PIN_HOG("GPIO6_AF6", in_pu), /* XENON_FLASH_ID */ + DB8500_PIN_HOG("GPIO7_AG5", in_pu), /* XENON_READY */ + DB8500_PIN_HOG("GPIO21_AB3", gpio_out_lo), /* XENON_EN1 */ + DB8500_PIN_HOG("GPIO64_F3", out_lo), /* XENON_EN2 */ + /* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */ + DB8500_PIN_HOG("GPIO31_V3", gpio_in_pu), /* EN1 */ + DB8500_PIN_HOG("GPIO32_V2", gpio_in_pd), /* DRDY */ + /* + * Display Interface 1 uses GPIO 65 for RST (reset). + * Display Interface 2 uses GPIO 66 for RST (reset). + * Drive DISP1 reset high (not reset), driver DISP2 reset low (reset) + */ + DB8500_PIN_HOG("GPIO65_F1", gpio_out_hi), /* DISP1 NO RST */ + DB8500_PIN_HOG("GPIO66_G3", gpio_out_lo), /* DISP2 RST */ + /* + * Touch screen uses GPIO 143 for RST1, GPIO 146 for RST2 and + * GPIO 67 for interrupts. Pull-up the IRQ line and drive both + * reset signals low. + */ + DB8500_PIN_HOG("GPIO143_D12", gpio_out_lo), /* TOUCH_RST1 */ + DB8500_PIN_HOG("GPIO67_G2", gpio_in_pu), /* TOUCH_INT2 */ + DB8500_PIN_HOG("GPIO146_D13", gpio_out_lo), /* TOUCH_RST2 */ + /* + * Drive D19-D23 for the ETM PTM trace interface low, + * (presumably pins are unconnected therefore grounded here, + * the "other alt C1" setting enables these pins) + */ + DB8500_PIN_HOG("GPIO70_G5", gpio_out_lo), + DB8500_PIN_HOG("GPIO71_G4", gpio_out_lo), + DB8500_PIN_HOG("GPIO72_H4", gpio_out_lo), + DB8500_PIN_HOG("GPIO73_H3", gpio_out_lo), + DB8500_PIN_HOG("GPIO74_J3", gpio_out_lo), + /* NAHJ CTRL on GPIO 76 to low, CTRL_INV on GPIO216 to high */ + DB8500_PIN_HOG("GPIO76_J2", gpio_out_lo), /* CTRL */ + DB8500_PIN_HOG("GPIO216_AG12", gpio_out_hi), /* CTRL_INV */ + /* NFC ENA and RESET to low, pulldown IRQ line */ + DB8500_PIN_HOG("GPIO77_H1", gpio_out_lo), /* NFC_ENA */ + DB8500_PIN_HOG("GPIO144_B13", gpio_in_pd), /* NFC_IRQ */ + DB8500_PIN_HOG("GPIO142_C11", gpio_out_lo), /* NFC_RESET */ + /* + * SKE keyboard partly on alt A and partly on "Other alt C1" + * Driver KP_O1,2,3,6,7 low and pull up KP_I 0,2,3 for three + * rows of 6 keys, then pull up force sensing interrup and + * drive reset and force sensing WU low. + */ + DB8500_MUX_HOG("kp_a_1", "kp"), + DB8500_MUX_HOG("kp_oc1_1", "kp"), + DB8500_PIN_HOG("GPIO90_A3", out_lo), /* KP_O1 */ + DB8500_PIN_HOG("GPIO87_B3", out_lo), /* KP_O2 */ + DB8500_PIN_HOG("GPIO86_C6", out_lo), /* KP_O3 */ + DB8500_PIN_HOG("GPIO96_D8", out_lo), /* KP_O6 */ + DB8500_PIN_HOG("GPIO94_D7", out_lo), /* KP_O7 */ + DB8500_PIN_HOG("GPIO93_B7", in_pu), /* KP_I0 */ + DB8500_PIN_HOG("GPIO89_E6", in_pu), /* KP_I2 */ + DB8500_PIN_HOG("GPIO88_C4", in_pu), /* KP_I3 */ + DB8500_PIN_HOG("GPIO91_B6", gpio_in_pu), /* FORCE_SENSING_INT */ + DB8500_PIN_HOG("GPIO92_D6", gpio_out_lo), /* FORCE_SENSING_RST */ + DB8500_PIN_HOG("GPIO97_D9", gpio_out_lo), /* FORCE_SENSING_WU */ + /* DiPro Sensor interrupt */ + DB8500_PIN_HOG("GPIO139_C9", gpio_in_pu), /* DIPRO_INT */ + /* Audio Amplifier HF enable */ + DB8500_PIN_HOG("GPIO149_B14", gpio_out_hi), /* VAUDIO_HF_EN, enable MAX8968 */ + /* GBF interface, pull low to reset state */ + DB8500_PIN_HOG("GPIO171_D23", gpio_out_lo), /* GBF_ENA_RESET */ + /* MSP : HDTV INTERFACE GPIO line */ + DB8500_PIN_HOG("GPIO192_AJ27", gpio_in_pd), + /* Accelerometer interrupt lines */ + DB8500_PIN_HOG("GPIO82_C1", gpio_in_pu), /* ACC_INT1 */ + DB8500_PIN_HOG("GPIO83_D3", gpio_in_pu), /* ACC_INT2 */ + /* SD card detect GPIO pin */ + DB8500_PIN_HOG("GPIO95_E8", gpio_in_pu), + /* + * Runtime stuff + * Pull up/down of some sensor GPIO pins, for proximity, HAL sensor + * etc. + */ + DB8500_PIN("GPIO217_AH12", gpio_in_pu_slpm_gpio_nopull, "gpio-keys.0"), + DB8500_PIN("GPIO145_C13", gpio_in_pd_slpm_gpio_nopull, "gpio-keys.0"), + DB8500_PIN("GPIO139_C9", gpio_in_pu_slpm_gpio_nopull, "gpio-keys.0"), + /* + * Make it possible to mux in the SKE keypad and bias the pins + * FIXME: what's the point with this on HREFv60? KP/SKE is already + * muxed in at another place! Enabling this will bork. + */ + DB8500_MUX("kp_a_2", "kp", "ske"), + DB8500_PIN("GPIO153_B17", in_pd_slpm_in_pu, "ske"), /* I7 */ + DB8500_PIN("GPIO154_C16", in_pd_slpm_in_pu, "ske"), /* I6 */ + DB8500_PIN("GPIO155_C19", in_pd_slpm_in_pu, "ske"), /* I5 */ + DB8500_PIN("GPIO156_C17", in_pd_slpm_in_pu, "ske"), /* I4 */ + DB8500_PIN("GPIO161_D21", in_pd_slpm_in_pu, "ske"), /* I3 */ + DB8500_PIN("GPIO162_D20", in_pd_slpm_in_pu, "ske"), /* I2 */ + DB8500_PIN("GPIO163_C20", in_pd_slpm_in_pu, "ske"), /* I1 */ + DB8500_PIN("GPIO164_B21", in_pd_slpm_in_pu, "ske"), /* I0 */ + DB8500_PIN("GPIO157_A18", in_pu_slpm_out_lo, "ske"), /* O7 */ + DB8500_PIN("GPIO158_C18", in_pu_slpm_out_lo, "ske"), /* O6 */ + DB8500_PIN("GPIO159_B19", in_pu_slpm_out_lo, "ske"), /* O5 */ + DB8500_PIN("GPIO160_B20", in_pu_slpm_out_lo, "ske"), /* O4 */ + DB8500_PIN("GPIO165_C21", in_pu_slpm_out_lo, "ske"), /* O3 */ + DB8500_PIN("GPIO166_A22", in_pu_slpm_out_lo, "ske"), /* O2 */ + DB8500_PIN("GPIO167_B24", in_pu_slpm_out_lo, "ske"), /* O1 */ + DB8500_PIN("GPIO168_C22", in_pu_slpm_out_lo, "ske"), /* O0 */ }; -static pin_cfg_t u9500_pins[] = { - GPIO4_U1_RXD | PIN_INPUT_PULLUP, - GPIO5_U1_TXD | PIN_OUTPUT_HIGH, - GPIO144_GPIO | PIN_INPUT_PULLUP,/* WLAN_IRQ */ - +static struct pinctrl_map __initdata u9500_pinmap[] = { + /* Mux in UART1 (just RX/TX) and set the pull-ups */ + DB8500_MUX_HOG("u1rxtx_a_1", "u1"), + DB8500_PIN_HOG("GPIO4_AH6", in_pu), + DB8500_PIN_HOG("GPIO5_AG6", out_hi), + /* WLAN_IRQ line */ + DB8500_PIN_HOG("GPIO144_B13", gpio_in_pu), /* HSI */ - GPIO219_HSIR_FLA0 | PIN_INPUT_PULLDOWN, - GPIO220_HSIR_DAT0 | PIN_INPUT_PULLDOWN, - GPIO221_HSIR_RDY0 | PIN_OUTPUT_LOW, - GPIO222_HSIT_FLA0 | PIN_OUTPUT_LOW, - GPIO223_HSIT_DAT0 | PIN_OUTPUT_LOW, - GPIO224_HSIT_RDY0 | PIN_INPUT_PULLDOWN, - GPIO225_HSIT_CAWAKE0 | PIN_INPUT_PULLDOWN, /* CA_WAKE0 */ - GPIO226_GPIO | PIN_OUTPUT_HIGH, /* AC_WAKE0 */ + DB8500_MUX_HOG("hsir_a_1", "hsi"), + DB8500_MUX_HOG("hsit_a_1", "hsi"), + DB8500_PIN_HOG("GPIO219_AG10", in_pd), /* RX FLA0 */ + DB8500_PIN_HOG("GPIO220_AH10", in_pd), /* RX DAT0 */ + DB8500_PIN_HOG("GPIO221_AJ11", out_lo), /* RX RDY0 */ + DB8500_PIN_HOG("GPIO222_AJ9", out_lo), /* TX FLA0 */ + DB8500_PIN_HOG("GPIO223_AH9", out_lo), /* TX DAT0 */ + DB8500_PIN_HOG("GPIO224_AG9", in_pd), /* TX RDY0 */ + DB8500_PIN_HOG("GPIO225_AG8", in_pd), /* CAWAKE0 */ + DB8500_PIN_HOG("GPIO226_AF8", out_hi), /* ACWAKE0 */ }; -static pin_cfg_t u8500_pins[] = { - GPIO226_GPIO | PIN_OUTPUT_LOW, /* WLAN_PMU_EN */ - GPIO4_GPIO | PIN_INPUT_PULLUP,/* WLAN_IRQ */ +static struct pinctrl_map __initdata u8500_pinmap[] = { + DB8500_PIN_HOG("GPIO226_AF8", gpio_out_lo), /* WLAN_PMU_EN */ + DB8500_PIN_HOG("GPIO4_AH6", gpio_in_pu), /* WLAN_IRQ */ }; -static pin_cfg_t snowball_pins[] = { - /* SSP0, to AB8500 */ - GPIO143_SSP0_CLK, - GPIO144_SSP0_FRM, - GPIO145_SSP0_RXD | PIN_PULL_DOWN, - GPIO146_SSP0_TXD, - - /* MMC0: MicroSD card */ - GPIO21_MC0_DAT31DIR | PIN_OUTPUT_HIGH, - - /* MMC2: LAN */ - GPIO86_SM_ADQ0, - GPIO87_SM_ADQ1, - GPIO88_SM_ADQ2, - GPIO89_SM_ADQ3, - GPIO90_SM_ADQ4, - GPIO91_SM_ADQ5, - GPIO92_SM_ADQ6, - GPIO93_SM_ADQ7, - - GPIO94_SM_ADVn, - GPIO95_SM_CS0n, - GPIO96_SM_OEn, - GPIO97_SM_WEn, - - GPIO128_SM_CKO, - GPIO130_SM_FBCLK, - GPIO131_SM_ADQ8, - GPIO132_SM_ADQ9, - GPIO133_SM_ADQ10, - GPIO134_SM_ADQ11, - GPIO135_SM_ADQ12, - GPIO136_SM_ADQ13, - GPIO137_SM_ADQ14, - GPIO138_SM_ADQ15, - - /* RSTn_LAN */ - GPIO141_GPIO | PIN_OUTPUT_HIGH, - +static struct pinctrl_map __initdata snowball_pinmap[] = { + /* Mux in SSP0 connected to AB8500, pull down RXD pin */ + DB8500_MUX_HOG("ssp0_a_1", "ssp0"), + DB8500_PIN_HOG("GPIO145_C13", pd), + /* Always drive the MC0 DAT31DIR line high on these boards */ + DB8500_PIN_HOG("GPIO21_AB3", out_hi), + /* Mux in "SM" which is used for the SMSC911x Ethernet adapter */ + DB8500_MUX_HOG("sm_b_1", "sm"), + /* Drive RSTn_LAN high */ + DB8500_PIN_HOG("GPIO141_C12", gpio_out_hi), /* Accelerometer/Magnetometer */ - GPIO163_GPIO | PIN_INPUT_PULLUP, /* ACCEL_IRQ1 */ - GPIO164_GPIO | PIN_INPUT_PULLUP, /* ACCEL_IRQ2 */ - GPIO165_GPIO | PIN_INPUT_PULLUP, /* MAG_DRDY */ - + DB8500_PIN_HOG("GPIO163_C20", gpio_in_pu), /* ACCEL_IRQ1 */ + DB8500_PIN_HOG("GPIO164_B21", gpio_in_pu), /* ACCEL_IRQ2 */ + DB8500_PIN_HOG("GPIO165_C21", gpio_in_pu), /* MAG_DRDY */ /* WLAN/GBF */ - GPIO161_GPIO | PIN_OUTPUT_LOW, /* WLAN_PMU_EN */ - GPIO171_GPIO | PIN_OUTPUT_HIGH,/* GBF_ENA */ - GPIO215_GPIO | PIN_OUTPUT_LOW,/* WLAN_ENA */ - GPIO216_GPIO | PIN_INPUT_PULLUP,/* WLAN_IRQ */ -}; - -/* - * I2C - */ - -static UX500_PINS(mop500_pins_i2c0, - GPIO147_I2C0_SCL | - PIN_SLPM_GPIO | PIN_SLPM_INPUT_NOPULL, - GPIO148_I2C0_SDA | - PIN_SLPM_GPIO | PIN_SLPM_INPUT_NOPULL, -); - -static UX500_PINS(mop500_pins_i2c1, - GPIO16_I2C1_SCL | - PIN_SLPM_GPIO | PIN_SLPM_INPUT_NOPULL, - GPIO17_I2C1_SDA | - PIN_SLPM_GPIO | PIN_SLPM_INPUT_NOPULL, -); - -static UX500_PINS(mop500_pins_i2c2, - GPIO10_I2C2_SDA | - PIN_SLPM_GPIO | PIN_SLPM_INPUT_NOPULL, - GPIO11_I2C2_SCL | - PIN_SLPM_GPIO | PIN_SLPM_INPUT_NOPULL, -); - -static UX500_PINS(mop500_pins_i2c3, - GPIO229_I2C3_SDA | - PIN_SLPM_GPIO | PIN_SLPM_INPUT_NOPULL, - GPIO230_I2C3_SCL | - PIN_SLPM_GPIO | PIN_SLPM_INPUT_NOPULL, -); - -static UX500_PINS(mop500_pins_mcde_tvout, - GPIO78_LCD_D8, - GPIO79_LCD_D9, - GPIO80_LCD_D10, - GPIO81_LCD_D11, - GPIO150_LCDA_CLK, -); - -static UX500_PINS(mop500_pins_mcde_hdmi, - GPIO69_LCD_VSI1 | PIN_INPUT_PULLUP, -); - -static UX500_PINS(mop500_pins_ske, - GPIO153_KP_I7 | PIN_INPUT_PULLDOWN | PIN_SLPM_INPUT_PULLUP, - GPIO154_KP_I6 | PIN_INPUT_PULLDOWN | PIN_SLPM_INPUT_PULLUP, - GPIO155_KP_I5 | PIN_INPUT_PULLDOWN | PIN_SLPM_INPUT_PULLUP, - GPIO156_KP_I4 | PIN_INPUT_PULLDOWN | PIN_SLPM_INPUT_PULLUP, - GPIO161_KP_I3 | PIN_INPUT_PULLDOWN | PIN_SLPM_INPUT_PULLUP, - GPIO162_KP_I2 | PIN_INPUT_PULLDOWN | PIN_SLPM_INPUT_PULLUP, - GPIO163_KP_I1 | PIN_INPUT_PULLDOWN | PIN_SLPM_INPUT_PULLUP, - GPIO164_KP_I0 | PIN_INPUT_PULLDOWN | PIN_SLPM_INPUT_PULLUP, - GPIO157_KP_O7 | PIN_INPUT_PULLUP | PIN_SLPM_OUTPUT_LOW, - GPIO158_KP_O6 | PIN_INPUT_PULLUP | PIN_SLPM_OUTPUT_LOW, - GPIO159_KP_O5 | PIN_INPUT_PULLUP | PIN_SLPM_OUTPUT_LOW, - GPIO160_KP_O4 | PIN_INPUT_PULLUP | PIN_SLPM_OUTPUT_LOW, - GPIO165_KP_O3 | PIN_INPUT_PULLUP | PIN_SLPM_OUTPUT_LOW, - GPIO166_KP_O2 | PIN_INPUT_PULLUP | PIN_SLPM_OUTPUT_LOW, - GPIO167_KP_O1 | PIN_INPUT_PULLUP | PIN_SLPM_OUTPUT_LOW, - GPIO168_KP_O0 | PIN_INPUT_PULLUP | PIN_SLPM_OUTPUT_LOW, -); - -/* sdi0 (removable MMC/SD/SDIO cards) */ -static UX500_PINS(mop500_pins_sdi0, - GPIO18_MC0_CMDDIR | PIN_OUTPUT_HIGH, - GPIO19_MC0_DAT0DIR | PIN_OUTPUT_HIGH, - GPIO20_MC0_DAT2DIR | PIN_OUTPUT_HIGH, - - GPIO22_MC0_FBCLK | PIN_INPUT_NOPULL, - GPIO23_MC0_CLK | PIN_OUTPUT_LOW, - GPIO24_MC0_CMD | PIN_INPUT_PULLUP, - GPIO25_MC0_DAT0 | PIN_INPUT_PULLUP, - GPIO26_MC0_DAT1 | PIN_INPUT_PULLUP, - GPIO27_MC0_DAT2 | PIN_INPUT_PULLUP, - GPIO28_MC0_DAT3 | PIN_INPUT_PULLUP, -); - -/* sdi1 (WLAN CW1200) */ -static UX500_PINS(mop500_pins_sdi1, - GPIO208_MC1_CLK | PIN_OUTPUT_LOW, - GPIO209_MC1_FBCLK | PIN_INPUT_NOPULL, - GPIO210_MC1_CMD | PIN_INPUT_PULLUP, - GPIO211_MC1_DAT0 | PIN_INPUT_PULLUP, - GPIO212_MC1_DAT1 | PIN_INPUT_PULLUP, - GPIO213_MC1_DAT2 | PIN_INPUT_PULLUP, - GPIO214_MC1_DAT3 | PIN_INPUT_PULLUP, -); - -/* sdi2 (POP eMMC) */ -static UX500_PINS(mop500_pins_sdi2, - GPIO128_MC2_CLK | PIN_OUTPUT_LOW, - GPIO129_MC2_CMD | PIN_INPUT_PULLUP, - GPIO130_MC2_FBCLK | PIN_INPUT_NOPULL, - GPIO131_MC2_DAT0 | PIN_INPUT_PULLUP, - GPIO132_MC2_DAT1 | PIN_INPUT_PULLUP, - GPIO133_MC2_DAT2 | PIN_INPUT_PULLUP, - GPIO134_MC2_DAT3 | PIN_INPUT_PULLUP, - GPIO135_MC2_DAT4 | PIN_INPUT_PULLUP, - GPIO136_MC2_DAT5 | PIN_INPUT_PULLUP, - GPIO137_MC2_DAT6 | PIN_INPUT_PULLUP, - GPIO138_MC2_DAT7 | PIN_INPUT_PULLUP, -); - -/* sdi4 (PCB eMMC) */ -static UX500_PINS(mop500_pins_sdi4, - GPIO197_MC4_DAT3 | PIN_INPUT_PULLUP, - GPIO198_MC4_DAT2 | PIN_INPUT_PULLUP, - GPIO199_MC4_DAT1 | PIN_INPUT_PULLUP, - GPIO200_MC4_DAT0 | PIN_INPUT_PULLUP, - GPIO201_MC4_CMD | PIN_INPUT_PULLUP, - GPIO202_MC4_FBCLK | PIN_INPUT_NOPULL, - GPIO203_MC4_CLK | PIN_OUTPUT_LOW, - GPIO204_MC4_DAT7 | PIN_INPUT_PULLUP, - GPIO205_MC4_DAT6 | PIN_INPUT_PULLUP, - GPIO206_MC4_DAT5 | PIN_INPUT_PULLUP, - GPIO207_MC4_DAT4 | PIN_INPUT_PULLUP, -); - -/* USB */ -static UX500_PINS(mop500_pins_usb, - GPIO256_USB_NXT, - GPIO257_USB_STP | PIN_OUTPUT_HIGH, - GPIO258_USB_XCLK, - GPIO259_USB_DIR, - GPIO260_USB_DAT7, - GPIO261_USB_DAT6, - GPIO262_USB_DAT5, - GPIO263_USB_DAT4, - GPIO264_USB_DAT3, - GPIO265_USB_DAT2, - GPIO266_USB_DAT1, - GPIO267_USB_DAT0, -); - -/* SPI2 */ -static UX500_PINS(mop500_pins_spi2, - GPIO216_GPIO | PIN_OUTPUT_HIGH, - GPIO218_SPI2_RXD | PIN_INPUT_PULLDOWN, - GPIO215_SPI2_TXD | PIN_OUTPUT_LOW, - GPIO217_SPI2_CLK | PIN_OUTPUT_LOW, -); - -static UX500_PINS(mop500_pins_sensors1p_v60, - GPIO217_GPIO| PIN_INPUT_PULLUP | - PIN_SLPM_GPIO | PIN_SLPM_INPUT_NOPULL, - GPIO145_GPIO | PIN_INPUT_PULLDOWN | - PIN_SLPM_GPIO | PIN_SLPM_INPUT_NOPULL, - GPIO139_GPIO | PIN_INPUT_PULLUP | - PIN_SLPM_GPIO | PIN_SLPM_INPUT_NOPULL, -); - -static UX500_PINS(mop500_pins_sensors1p, - PIN_CFG_INPUT(GPIO_PROX_SENSOR, GPIO, NOPULL), - PIN_CFG_INPUT(GPIO_HAL_SENSOR, GPIO, NOPULL), -); - -static struct ux500_pin_lookup mop500_runtime_pins[] = { - PIN_LOOKUP("mcde-tvout", &mop500_pins_mcde_tvout), - PIN_LOOKUP("av8100-hdmi", &mop500_pins_mcde_hdmi), - PIN_LOOKUP("nmk-i2c.0", &mop500_pins_i2c0), - PIN_LOOKUP("nmk-i2c.1", &mop500_pins_i2c1), - PIN_LOOKUP("nmk-i2c.2", &mop500_pins_i2c2), - PIN_LOOKUP("nmk-i2c.3", &mop500_pins_i2c3), - PIN_LOOKUP("sdi0", &mop500_pins_sdi0), - PIN_LOOKUP("sdi1", &mop500_pins_sdi1), - PIN_LOOKUP("sdi2", &mop500_pins_sdi2), - PIN_LOOKUP("sdi4", &mop500_pins_sdi4), - PIN_LOOKUP("musb-ux500.0", &mop500_pins_usb), - PIN_LOOKUP("spi2", &mop500_pins_spi2), -}; - -static struct ux500_pin_lookup mop500_runtime_pins_v60[] = { - PIN_LOOKUP("ske", &mop500_pins_ske), - PIN_LOOKUP("gpio-keys.0", &mop500_pins_sensors1p_v60), -}; - -static struct ux500_pin_lookup mop500_runtime_pins_pre_v60[] = { - PIN_LOOKUP("ske", &mop500_pins_ske), - PIN_LOOKUP("gpio-keys.0", &mop500_pins_sensors1p), + DB8500_PIN_HOG("GPIO161_D21", gpio_out_lo), /* WLAN_PMU_EN */ + DB8500_PIN_HOG("GPIO171_D23", gpio_out_hi), /* GBF_ENA */ + DB8500_PIN_HOG("GPIO215_AH13", gpio_out_lo), /* WLAN_ENA */ + DB8500_PIN_HOG("GPIO216_AG12", gpio_in_pu), /* WLAN_IRQ */ }; /* @@ -444,64 +470,45 @@ int pins_for_u9500(void) return 0; } -void __init mop500_pins_init(void) +static void __init mop500_href_family_pinmaps_init(void) { - nmk_config_pins(mop500_pins_common, - ARRAY_SIZE(mop500_pins_common)); - - ux500_pins_add(mop500_runtime_pins, ARRAY_SIZE(mop500_runtime_pins)); - - ux500_pins_add(mop500_runtime_pins_pre_v60, - ARRAY_SIZE(mop500_runtime_pins_pre_v60)); - switch (pinsfor) { case PINS_FOR_U9500: - nmk_config_pins(u9500_pins, ARRAY_SIZE(u9500_pins)); + pinctrl_register_mappings(u9500_pinmap, + ARRAY_SIZE(u9500_pinmap)); break; - case PINS_FOR_DEFAULT: - nmk_config_pins(u8500_pins, ARRAY_SIZE(u8500_pins)); + pinctrl_register_mappings(u8500_pinmap, + ARRAY_SIZE(u8500_pinmap)); default: break; } - - nmk_config_pins(mop500_pins_default, - ARRAY_SIZE(mop500_pins_default)); } -void __init snowball_pins_init(void) +void __init mop500_pinmaps_init(void) { - nmk_config_pins(mop500_pins_common, - ARRAY_SIZE(mop500_pins_common)); - - ux500_pins_add(mop500_runtime_pins, ARRAY_SIZE(mop500_runtime_pins)); - - nmk_config_pins(u8500_pins, ARRAY_SIZE(u8500_pins)); - - nmk_config_pins(snowball_pins, ARRAY_SIZE(snowball_pins)); + pinctrl_register_mappings(mop500_family_pinmap, + ARRAY_SIZE(mop500_family_pinmap)); + pinctrl_register_mappings(mop500_pinmap, + ARRAY_SIZE(mop500_pinmap)); + mop500_href_family_pinmaps_init(); } -void __init hrefv60_pins_init(void) +void __init snowball_pinmaps_init(void) { - nmk_config_pins(mop500_pins_common, - ARRAY_SIZE(mop500_pins_common)); - - ux500_pins_add(mop500_runtime_pins, ARRAY_SIZE(mop500_runtime_pins)); - - ux500_pins_add(mop500_runtime_pins_v60, - ARRAY_SIZE(mop500_runtime_pins_v60)); - - nmk_config_pins(hrefv60_pins, - ARRAY_SIZE(hrefv60_pins)); - - switch (pinsfor) { - case PINS_FOR_U9500: - nmk_config_pins(u9500_pins, ARRAY_SIZE(u9500_pins)); - break; + pinctrl_register_mappings(mop500_family_pinmap, + ARRAY_SIZE(mop500_family_pinmap)); + pinctrl_register_mappings(snowball_pinmap, + ARRAY_SIZE(snowball_pinmap)); + pinctrl_register_mappings(u8500_pinmap, + ARRAY_SIZE(u8500_pinmap)); +} - case PINS_FOR_DEFAULT: - nmk_config_pins(u8500_pins, ARRAY_SIZE(u8500_pins)); - default: - break; - } +void __init hrefv60_pinmaps_init(void) +{ + pinctrl_register_mappings(mop500_family_pinmap, + ARRAY_SIZE(mop500_family_pinmap)); + pinctrl_register_mappings(hrefv60_pinmap, + ARRAY_SIZE(hrefv60_pinmap)); + mop500_href_family_pinmaps_init(); } diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index ca0d625..1dc3165 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -1,3 +1,4 @@ + /* * Copyright (C) 2008-2009 ST-Ericsson * @@ -29,18 +30,17 @@ #include <linux/smsc911x.h> #include <linux/gpio_keys.h> #include <linux/delay.h> - #include <linux/of.h> #include <linux/of_platform.h> - #include <linux/leds.h> +#include <linux/pinctrl/consumer.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/hardware/gic.h> #include <plat/i2c.h> #include <plat/ste_dma40.h> -#include <plat/pincfg.h> #include <plat/gpio-nomadik.h> #include <mach/hardware.h> @@ -48,7 +48,6 @@ #include <mach/devices.h> #include <mach/irqs.h> -#include "pins-db8500.h" #include "ste-dma40-db8500.h" #include "devices-db8500.h" #include "board-mop500.h" @@ -521,14 +520,6 @@ static struct stedma40_chan_cfg uart2_dma_cfg_tx = { }; #endif - -static pin_cfg_t mop500_pins_uart0[] = { - GPIO0_U0_CTSn | PIN_INPUT_PULLUP, - GPIO1_U0_RTSn | PIN_OUTPUT_HIGH, - GPIO2_U0_RXD | PIN_INPUT_PULLUP, - GPIO3_U0_TXD | PIN_OUTPUT_HIGH, -}; - #define PRCC_K_SOFTRST_SET 0x18 #define PRCC_K_SOFTRST_CLEAR 0x1C static void ux500_uart0_reset(void) @@ -549,24 +540,33 @@ static void ux500_uart0_reset(void) udelay(1); } +/* This needs to be referenced by callbacks */ +struct pinctrl *u0_p; +struct pinctrl_state *u0_def; +struct pinctrl_state *u0_sleep; + static void ux500_uart0_init(void) { int ret; - ret = nmk_config_pins(mop500_pins_uart0, - ARRAY_SIZE(mop500_pins_uart0)); - if (ret < 0) - pr_err("pl011: uart pins_enable failed\n"); + if (IS_ERR(u0_p) || IS_ERR(u0_def)) + return; + + ret = pinctrl_select_state(u0_p, u0_def); + if (ret) + pr_err("could not set UART0 defstate\n"); } static void ux500_uart0_exit(void) { int ret; - ret = nmk_config_pins_sleep(mop500_pins_uart0, - ARRAY_SIZE(mop500_pins_uart0)); - if (ret < 0) - pr_err("pl011: uart pins_disable failed\n"); + if (IS_ERR(u0_p) || IS_ERR(u0_sleep)) + return; + + ret = pinctrl_select_state(u0_p, u0_sleep); + if (ret) + pr_err("could not set UART0 idlestate\n"); } static struct amba_pl011_data uart0_plat = { @@ -598,7 +598,28 @@ static struct amba_pl011_data uart2_plat = { static void __init mop500_uart_init(struct device *parent) { - db8500_add_uart0(parent, &uart0_plat); + struct amba_device *uart0_device; + + uart0_device = db8500_add_uart0(parent, &uart0_plat); + if (uart0_device) { + u0_p = pinctrl_get(&uart0_device->dev); + if (IS_ERR(u0_p)) + dev_err(&uart0_device->dev, + "could not get UART0 pinctrl\n"); + else { + u0_def = pinctrl_lookup_state(u0_p, + PINCTRL_STATE_DEFAULT); + if (IS_ERR(u0_def)) { + dev_err(&uart0_device->dev, + "could not get UART0 defstate\n"); + } + u0_sleep = pinctrl_lookup_state(u0_p, + PINCTRL_STATE_SLEEP); + if (IS_ERR(u0_sleep)) + dev_err(&uart0_device->dev, + "could not get UART0 idlestate\n"); + } + } db8500_add_uart1(parent, &uart1_plat); db8500_add_uart2(parent, &uart2_plat); } @@ -618,10 +639,9 @@ static void __init mop500_init_machine(void) mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR; + mop500_pinmaps_init(); parent = u8500_init_devices(); - mop500_pins_init(); - /* FIXME: parent of ab8500 should be prcmu */ for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++) mop500_platform_devs[i]->dev.parent = parent; @@ -651,10 +671,9 @@ static void __init snowball_init_machine(void) int i2c0_devs; int i; + snowball_pinmaps_init(); parent = u8500_init_devices(); - snowball_pins_init(); - for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++) snowball_platform_devs[i]->dev.parent = parent; @@ -689,10 +708,9 @@ static void __init hrefv60_init_machine(void) */ mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO; + hrefv60_pinmaps_init(); parent = u8500_init_devices(); - hrefv60_pins_init(); - for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++) mop500_platform_devs[i]->dev.parent = parent; @@ -781,6 +799,14 @@ static void __init u8500_init_machine(void) int i2c0_devs; int i; + /* Pinmaps must be in place before devices register */ + if (of_machine_is_compatible("st-ericsson,mop500")) + mop500_pinmaps_init(); + else if (of_machine_is_compatible("calaosystems,snowball-a9500")) + snowball_pinmaps_init(); + else if (of_machine_is_compatible("st-ericsson,hrefv60+")) + hrefv60_pinmaps_init(); + parent = u8500_init_devices(); i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); @@ -794,14 +820,12 @@ static void __init u8500_init_machine(void) if (of_machine_is_compatible("st-ericsson,mop500")) { mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR; - mop500_pins_init(); platform_add_devices(mop500_platform_devs, ARRAY_SIZE(mop500_platform_devs)); mop500_sdi_init(parent); } else if (of_machine_is_compatible("calaosystems,snowball-a9500")) { - snowball_pins_init(); platform_add_devices(snowball_platform_devs, ARRAY_SIZE(snowball_platform_devs)); @@ -814,7 +838,6 @@ static void __init u8500_init_machine(void) */ mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO; i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES; - hrefv60_pins_init(); platform_add_devices(mop500_platform_devs, ARRAY_SIZE(mop500_platform_devs)); diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index 91dc63f..bc44c07 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -85,9 +85,9 @@ extern void hrefv60_sdi_init(struct device *parent); extern void mop500_sdi_tc35892_init(struct device *parent); void __init mop500_u8500uib_init(void); void __init mop500_stuib_init(void); -void __init mop500_pins_init(void); -void __init hrefv60_pins_init(void); -void __init snowball_pins_init(void); +void __init mop500_pinmaps_init(void); +void __init snowball_pinmaps_init(void); +void __init hrefv60_pinmaps_init(void); void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info, unsigned n); diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 9bd8163..d992d2b 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -141,6 +141,7 @@ static void __init db8500_add_gpios(struct device *parent) dbx500_add_gpios(parent, ARRAY_AND_SIZE(db8500_gpio_base), IRQ_DB8500_GPIO0, &pdata); + dbx500_add_pinctrl(parent, "pinctrl-db8500"); } static int usb_db8500_rx_dma_cfg[] = { diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h index 39c74ec..939f750 100644 --- a/arch/arm/mach-ux500/devices-common.h +++ b/arch/arm/mach-ux500/devices-common.h @@ -93,4 +93,16 @@ struct nmk_gpio_platform_data; void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num, int irq, struct nmk_gpio_platform_data *pdata); +static inline void +dbx500_add_pinctrl(struct device *parent, const char *name) +{ + struct platform_device_info pdevinfo = { + .parent = parent, + .name = name, + .id = -1, + }; + + platform_device_register_full(&pdevinfo); +} + #endif diff --git a/arch/arm/mach-ux500/pins.c b/arch/arm/mach-ux500/pins.c deleted file mode 100644 index 38c1d47..0000000 --- a/arch/arm/mach-ux500/pins.c +++ /dev/null @@ -1,88 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson - * License terms: GNU General Public License (GPL), version 2 - */ - -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/device.h> -#include <linux/mutex.h> -#include <linux/spinlock.h> -#include <linux/err.h> -#include <plat/pincfg.h> - -#include "pins.h" - -static LIST_HEAD(pin_lookups); -static DEFINE_MUTEX(pin_lookups_mutex); -static DEFINE_SPINLOCK(pins_lock); - -void __init ux500_pins_add(struct ux500_pin_lookup *pl, size_t num) -{ - mutex_lock(&pin_lookups_mutex); - - while (num--) { - list_add_tail(&pl->node, &pin_lookups); - pl++; - } - - mutex_unlock(&pin_lookups_mutex); -} - -struct ux500_pins *ux500_pins_get(const char *name) -{ - struct ux500_pins *pins = NULL; - struct ux500_pin_lookup *pl; - - mutex_lock(&pin_lookups_mutex); - - list_for_each_entry(pl, &pin_lookups, node) { - if (!strcmp(pl->name, name)) { - pins = pl->pins; - goto out; - } - } - -out: - mutex_unlock(&pin_lookups_mutex); - return pins; -} - -int ux500_pins_enable(struct ux500_pins *pins) -{ - unsigned long flags; - int ret = 0; - - spin_lock_irqsave(&pins_lock, flags); - - if (pins->usage++ == 0) - ret = nmk_config_pins(pins->cfg, pins->num); - - spin_unlock_irqrestore(&pins_lock, flags); - return ret; -} - -int ux500_pins_disable(struct ux500_pins *pins) -{ - unsigned long flags; - int ret = 0; - - spin_lock_irqsave(&pins_lock, flags); - - if (WARN_ON(pins->usage == 0)) - goto out; - - if (--pins->usage == 0) - ret = nmk_config_pins_sleep(pins->cfg, pins->num); - -out: - spin_unlock_irqrestore(&pins_lock, flags); - return ret; -} - -void ux500_pins_put(struct ux500_pins *pins) -{ - WARN_ON(!pins); -} diff --git a/arch/arm/mach-ux500/pins.h b/arch/arm/mach-ux500/pins.h deleted file mode 100644 index 0d36af2..0000000 --- a/arch/arm/mach-ux500/pins.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson - * License terms: GNU General Public License (GPL), version 2 - */ - -#ifndef __MACH_UX500_PINS_H -#define __MACH_UX500_PINS_H - -#include <linux/list.h> -#include <plat/pincfg.h> - -#define PIN_LOOKUP(_name, _pins) \ -{ \ - .name = _name, \ - .pins = _pins, \ -} - -#define UX500_PINS(name, pins...) \ -struct ux500_pins name = { \ - .cfg = (pin_cfg_t[]) {pins}, \ - .num = ARRAY_SIZE(((pin_cfg_t[]) {pins})), \ -} - -struct ux500_pins { - int usage; - int num; - pin_cfg_t *cfg; -}; - -struct ux500_pin_lookup { - struct list_head node; - const char *name; - struct ux500_pins *pins; -}; - -void __init ux500_pins_add(struct ux500_pin_lookup *pl, size_t num); -void __init ux500_offchip_gpio_init(struct ux500_pins *pins); -struct ux500_pins *ux500_pins_get(const char *name); -int ux500_pins_enable(struct ux500_pins *pins); -int ux500_pins_disable(struct ux500_pins *pins); -void ux500_pins_put(struct ux500_pins *pins); -int pins_for_u9500(void); - -#endif diff --git a/arch/arm/plat-nomadik/include/plat/pincfg.h b/arch/arm/plat-nomadik/include/plat/pincfg.h index c015133..9c949c7 100644 --- a/arch/arm/plat-nomadik/include/plat/pincfg.h +++ b/arch/arm/plat-nomadik/include/plat/pincfg.h @@ -124,6 +124,19 @@ typedef unsigned long pin_cfg_t; #define PIN_LOWEMI_DISABLED (0 << PIN_LOWEMI_SHIFT) #define PIN_LOWEMI_ENABLED (1 << PIN_LOWEMI_SHIFT) +#define PIN_GPIOMODE_SHIFT 26 +#define PIN_GPIOMODE_MASK (0x1 << PIN_GPIOMODE_SHIFT) +#define PIN_GPIOMODE(x) (((x) & PIN_GPIOMODE_MASK) >> PIN_GPIOMODE_SHIFT) +#define PIN_GPIOMODE_DISABLED (0 << PIN_GPIOMODE_SHIFT) +#define PIN_GPIOMODE_ENABLED (1 << PIN_GPIOMODE_SHIFT) + +#define PIN_SLEEPMODE_SHIFT 27 +#define PIN_SLEEPMODE_MASK (0x1 << PIN_SLEEPMODE_SHIFT) +#define PIN_SLEEPMODE(x) (((x) & PIN_SLEEPMODE_MASK) >> PIN_SLEEPMODE_SHIFT) +#define PIN_SLEEPMODE_DISABLED (0 << PIN_SLEEPMODE_SHIFT) +#define PIN_SLEEPMODE_ENABLED (1 << PIN_SLEEPMODE_SHIFT) + + /* Shortcuts. Use these instead of separate DIR, PULL, and VAL. */ #define PIN_INPUT_PULLDOWN (PIN_DIR_INPUT | PIN_PULL_DOWN) #define PIN_INPUT_PULLUP (PIN_DIR_INPUT | PIN_PULL_UP) diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 007f54b..a4193ab 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -36,7 +36,6 @@ obj-$(CONFIG_GPIO_MSM_V1) += gpio-msm-v1.o obj-$(CONFIG_GPIO_MSM_V2) += gpio-msm-v2.o obj-$(CONFIG_GPIO_MXC) += gpio-mxc.o obj-$(CONFIG_GPIO_MXS) += gpio-mxs.o -obj-$(CONFIG_PLAT_NOMADIK) += gpio-nomadik.o obj-$(CONFIG_ARCH_OMAP) += gpio-omap.o obj-$(CONFIG_GPIO_PCA953X) += gpio-pca953x.o obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf857x.o diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index a54a931..cc01c75 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -64,6 +64,16 @@ config PINCTRL_IMX28 select PINCONF select PINCTRL_MXS +config PINCTRL_NOMADIK + bool "Nomadik pin controller driver" + depends on ARCH_U8500 + select PINMUX + select PINCONF + +config PINCTRL_DB8500 + bool "DB8500 pin controller driver" + depends on PINCTRL_NOMADIK && ARCH_U8500 + config PINCTRL_PXA168 bool "PXA168 pin controller driver" depends on ARCH_MMP diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index c9b0be5..8e764ad 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -16,6 +16,8 @@ obj-$(CONFIG_PINCTRL_MMP2) += pinctrl-mmp2.o obj-$(CONFIG_PINCTRL_MXS) += pinctrl-mxs.o obj-$(CONFIG_PINCTRL_IMX23) += pinctrl-imx23.o obj-$(CONFIG_PINCTRL_IMX28) += pinctrl-imx28.o +obj-$(CONFIG_PINCTRL_NOMADIK) += pinctrl-nomadik.o +obj-$(CONFIG_PINCTRL_DB8500) += pinctrl-nomadik-db8500.o obj-$(CONFIG_PINCTRL_PXA168) += pinctrl-pxa168.o obj-$(CONFIG_PINCTRL_PXA910) += pinctrl-pxa910.o obj-$(CONFIG_PINCTRL_SIRF) += pinctrl-sirf.o diff --git a/drivers/pinctrl/pinctrl-nomadik-db8500.c b/drivers/pinctrl/pinctrl-nomadik-db8500.c new file mode 100644 index 0000000..8b20222 --- /dev/null +++ b/drivers/pinctrl/pinctrl-nomadik-db8500.c @@ -0,0 +1,857 @@ +#include <linux/kernel.h> +#include <linux/pinctrl/pinctrl.h> +#include "pinctrl-nomadik.h" + +/* All the pins that can be used for GPIO and some other functions */ +#define _GPIO(offset) (offset) + +#define DB8500_PIN_AJ5 _GPIO(0) +#define DB8500_PIN_AJ3 _GPIO(1) +#define DB8500_PIN_AH4 _GPIO(2) +#define DB8500_PIN_AH3 _GPIO(3) +#define DB8500_PIN_AH6 _GPIO(4) +#define DB8500_PIN_AG6 _GPIO(5) +#define DB8500_PIN_AF6 _GPIO(6) +#define DB8500_PIN_AG5 _GPIO(7) +#define DB8500_PIN_AD5 _GPIO(8) +#define DB8500_PIN_AE4 _GPIO(9) +#define DB8500_PIN_AF5 _GPIO(10) +#define DB8500_PIN_AG4 _GPIO(11) +#define DB8500_PIN_AC4 _GPIO(12) +#define DB8500_PIN_AF3 _GPIO(13) +#define DB8500_PIN_AE3 _GPIO(14) +#define DB8500_PIN_AC3 _GPIO(15) +#define DB8500_PIN_AD3 _GPIO(16) +#define DB8500_PIN_AD4 _GPIO(17) +#define DB8500_PIN_AC2 _GPIO(18) +#define DB8500_PIN_AC1 _GPIO(19) +#define DB8500_PIN_AB4 _GPIO(20) +#define DB8500_PIN_AB3 _GPIO(21) +#define DB8500_PIN_AA3 _GPIO(22) +#define DB8500_PIN_AA4 _GPIO(23) +#define DB8500_PIN_AB2 _GPIO(24) +#define DB8500_PIN_Y4 _GPIO(25) +#define DB8500_PIN_Y2 _GPIO(26) +#define DB8500_PIN_AA2 _GPIO(27) +#define DB8500_PIN_AA1 _GPIO(28) +#define DB8500_PIN_W2 _GPIO(29) +#define DB8500_PIN_W3 _GPIO(30) +#define DB8500_PIN_V3 _GPIO(31) +#define DB8500_PIN_V2 _GPIO(32) +#define DB8500_PIN_AF2 _GPIO(33) +#define DB8500_PIN_AE1 _GPIO(34) +#define DB8500_PIN_AE2 _GPIO(35) +#define DB8500_PIN_AG2 _GPIO(36) +/* Hole */ +#define DB8500_PIN_F3 _GPIO(64) +#define DB8500_PIN_F1 _GPIO(65) +#define DB8500_PIN_G3 _GPIO(66) +#define DB8500_PIN_G2 _GPIO(67) +#define DB8500_PIN_E1 _GPIO(68) +#define DB8500_PIN_E2 _GPIO(69) +#define DB8500_PIN_G5 _GPIO(70) +#define DB8500_PIN_G4 _GPIO(71) +#define DB8500_PIN_H4 _GPIO(72) +#define DB8500_PIN_H3 _GPIO(73) +#define DB8500_PIN_J3 _GPIO(74) +#define DB8500_PIN_H2 _GPIO(75) +#define DB8500_PIN_J2 _GPIO(76) +#define DB8500_PIN_H1 _GPIO(77) +#define DB8500_PIN_F4 _GPIO(78) +#define DB8500_PIN_E3 _GPIO(79) +#define DB8500_PIN_E4 _GPIO(80) +#define DB8500_PIN_D2 _GPIO(81) +#define DB8500_PIN_C1 _GPIO(82) +#define DB8500_PIN_D3 _GPIO(83) +#define DB8500_PIN_C2 _GPIO(84) +#define DB8500_PIN_D5 _GPIO(85) +#define DB8500_PIN_C6 _GPIO(86) +#define DB8500_PIN_B3 _GPIO(87) +#define DB8500_PIN_C4 _GPIO(88) +#define DB8500_PIN_E6 _GPIO(89) +#define DB8500_PIN_A3 _GPIO(90) +#define DB8500_PIN_B6 _GPIO(91) +#define DB8500_PIN_D6 _GPIO(92) +#define DB8500_PIN_B7 _GPIO(93) +#define DB8500_PIN_D7 _GPIO(94) +#define DB8500_PIN_E8 _GPIO(95) +#define DB8500_PIN_D8 _GPIO(96) +#define DB8500_PIN_D9 _GPIO(97) +/* Hole */ +#define DB8500_PIN_A5 _GPIO(128) +#define DB8500_PIN_B4 _GPIO(129) +#define DB8500_PIN_C8 _GPIO(130) +#define DB8500_PIN_A12 _GPIO(131) +#define DB8500_PIN_C10 _GPIO(132) +#define DB8500_PIN_B10 _GPIO(133) +#define DB8500_PIN_B9 _GPIO(134) +#define DB8500_PIN_A9 _GPIO(135) +#define DB8500_PIN_C7 _GPIO(136) +#define DB8500_PIN_A7 _GPIO(137) +#define DB8500_PIN_C5 _GPIO(138) +#define DB8500_PIN_C9 _GPIO(139) +#define DB8500_PIN_B11 _GPIO(140) +#define DB8500_PIN_C12 _GPIO(141) +#define DB8500_PIN_C11 _GPIO(142) +#define DB8500_PIN_D12 _GPIO(143) +#define DB8500_PIN_B13 _GPIO(144) +#define DB8500_PIN_C13 _GPIO(145) +#define DB8500_PIN_D13 _GPIO(146) +#define DB8500_PIN_C15 _GPIO(147) +#define DB8500_PIN_B16 _GPIO(148) +#define DB8500_PIN_B14 _GPIO(149) +#define DB8500_PIN_C14 _GPIO(150) +#define DB8500_PIN_D17 _GPIO(151) +#define DB8500_PIN_D16 _GPIO(152) +#define DB8500_PIN_B17 _GPIO(153) +#define DB8500_PIN_C16 _GPIO(154) +#define DB8500_PIN_C19 _GPIO(155) +#define DB8500_PIN_C17 _GPIO(156) +#define DB8500_PIN_A18 _GPIO(157) +#define DB8500_PIN_C18 _GPIO(158) +#define DB8500_PIN_B19 _GPIO(159) +#define DB8500_PIN_B20 _GPIO(160) +#define DB8500_PIN_D21 _GPIO(161) +#define DB8500_PIN_D20 _GPIO(162) +#define DB8500_PIN_C20 _GPIO(163) +#define DB8500_PIN_B21 _GPIO(164) +#define DB8500_PIN_C21 _GPIO(165) +#define DB8500_PIN_A22 _GPIO(166) +#define DB8500_PIN_B24 _GPIO(167) +#define DB8500_PIN_C22 _GPIO(168) +#define DB8500_PIN_D22 _GPIO(169) +#define DB8500_PIN_C23 _GPIO(170) +#define DB8500_PIN_D23 _GPIO(171) +/* Hole */ +#define DB8500_PIN_AJ27 _GPIO(192) +#define DB8500_PIN_AH27 _GPIO(193) +#define DB8500_PIN_AF27 _GPIO(194) +#define DB8500_PIN_AG28 _GPIO(195) +#define DB8500_PIN_AG26 _GPIO(196) +#define DB8500_PIN_AH24 _GPIO(197) +#define DB8500_PIN_AG25 _GPIO(198) +#define DB8500_PIN_AH23 _GPIO(199) +#define DB8500_PIN_AH26 _GPIO(200) +#define DB8500_PIN_AF24 _GPIO(201) +#define DB8500_PIN_AF25 _GPIO(202) +#define DB8500_PIN_AE23 _GPIO(203) +#define DB8500_PIN_AF23 _GPIO(204) +#define DB8500_PIN_AG23 _GPIO(205) +#define DB8500_PIN_AG24 _GPIO(206) +#define DB8500_PIN_AJ23 _GPIO(207) +#define DB8500_PIN_AH16 _GPIO(208) +#define DB8500_PIN_AG15 _GPIO(209) +#define DB8500_PIN_AJ15 _GPIO(210) +#define DB8500_PIN_AG14 _GPIO(211) +#define DB8500_PIN_AF13 _GPIO(212) +#define DB8500_PIN_AG13 _GPIO(213) +#define DB8500_PIN_AH15 _GPIO(214) +#define DB8500_PIN_AH13 _GPIO(215) +#define DB8500_PIN_AG12 _GPIO(216) +#define DB8500_PIN_AH12 _GPIO(217) +#define DB8500_PIN_AH11 _GPIO(218) +#define DB8500_PIN_AG10 _GPIO(219) +#define DB8500_PIN_AH10 _GPIO(220) +#define DB8500_PIN_AJ11 _GPIO(221) +#define DB8500_PIN_AJ9 _GPIO(222) +#define DB8500_PIN_AH9 _GPIO(223) +#define DB8500_PIN_AG9 _GPIO(224) +#define DB8500_PIN_AG8 _GPIO(225) +#define DB8500_PIN_AF8 _GPIO(226) +#define DB8500_PIN_AH7 _GPIO(227) +#define DB8500_PIN_AJ6 _GPIO(228) +#define DB8500_PIN_AG7 _GPIO(229) +#define DB8500_PIN_AF7 _GPIO(230) +/* Hole */ +#define DB8500_PIN_AF28 _GPIO(256) +#define DB8500_PIN_AE29 _GPIO(257) +#define DB8500_PIN_AD29 _GPIO(258) +#define DB8500_PIN_AC29 _GPIO(259) +#define DB8500_PIN_AD28 _GPIO(260) +#define DB8500_PIN_AD26 _GPIO(261) +#define DB8500_PIN_AE26 _GPIO(262) +#define DB8500_PIN_AG29 _GPIO(263) +#define DB8500_PIN_AE27 _GPIO(264) +#define DB8500_PIN_AD27 _GPIO(265) +#define DB8500_PIN_AC28 _GPIO(266) +#define DB8500_PIN_AC27 _GPIO(267) + +/* + * The names of the pins are denoted by GPIO number and ball name, even + * though they can be used for other things than GPIO, this is the first + * column in the table of the data sheet and often used on schematics and + * such. + */ +static const struct pinctrl_pin_desc nmk_db8500_pins[] = { + PINCTRL_PIN(DB8500_PIN_AJ5, "GPIO0_AJ5"), + PINCTRL_PIN(DB8500_PIN_AJ3, "GPIO1_AJ3"), + PINCTRL_PIN(DB8500_PIN_AH4, "GPIO2_AH4"), + PINCTRL_PIN(DB8500_PIN_AH3, "GPIO3_AH3"), + PINCTRL_PIN(DB8500_PIN_AH6, "GPIO4_AH6"), + PINCTRL_PIN(DB8500_PIN_AG6, "GPIO5_AG6"), + PINCTRL_PIN(DB8500_PIN_AF6, "GPIO6_AF6"), + PINCTRL_PIN(DB8500_PIN_AG5, "GPIO7_AG5"), + PINCTRL_PIN(DB8500_PIN_AD5, "GPIO8_AD5"), + PINCTRL_PIN(DB8500_PIN_AE4, "GPIO9_AE4"), + PINCTRL_PIN(DB8500_PIN_AF5, "GPIO10_AF5"), + PINCTRL_PIN(DB8500_PIN_AG4, "GPIO11_AG4"), + PINCTRL_PIN(DB8500_PIN_AC4, "GPIO12_AC4"), + PINCTRL_PIN(DB8500_PIN_AF3, "GPIO13_AF3"), + PINCTRL_PIN(DB8500_PIN_AE3, "GPIO14_AE3"), + PINCTRL_PIN(DB8500_PIN_AC3, "GPIO15_AC3"), + PINCTRL_PIN(DB8500_PIN_AD3, "GPIO16_AD3"), + PINCTRL_PIN(DB8500_PIN_AD4, "GPIO17_AD4"), + PINCTRL_PIN(DB8500_PIN_AC2, "GPIO18_AC2"), + PINCTRL_PIN(DB8500_PIN_AC1, "GPIO19_AC1"), + PINCTRL_PIN(DB8500_PIN_AB4, "GPIO20_AB4"), + PINCTRL_PIN(DB8500_PIN_AB3, "GPIO21_AB3"), + PINCTRL_PIN(DB8500_PIN_AA3, "GPIO22_AA3"), + PINCTRL_PIN(DB8500_PIN_AA4, "GPIO23_AA4"), + PINCTRL_PIN(DB8500_PIN_AB2, "GPIO24_AB2"), + PINCTRL_PIN(DB8500_PIN_Y4, "GPIO25_Y4"), + PINCTRL_PIN(DB8500_PIN_Y2, "GPIO26_Y2"), + PINCTRL_PIN(DB8500_PIN_AA2, "GPIO27_AA2"), + PINCTRL_PIN(DB8500_PIN_AA1, "GPIO28_AA1"), + PINCTRL_PIN(DB8500_PIN_W2, "GPIO29_W2"), + PINCTRL_PIN(DB8500_PIN_W3, "GPIO30_W3"), + PINCTRL_PIN(DB8500_PIN_V3, "GPIO31_V3"), + PINCTRL_PIN(DB8500_PIN_V2, "GPIO32_V2"), + PINCTRL_PIN(DB8500_PIN_AF2, "GPIO33_AF2"), + PINCTRL_PIN(DB8500_PIN_AE1, "GPIO34_AE1"), + PINCTRL_PIN(DB8500_PIN_AE2, "GPIO35_AE2"), + PINCTRL_PIN(DB8500_PIN_AG2, "GPIO36_AG2"), + /* Hole */ + PINCTRL_PIN(DB8500_PIN_F3, "GPIO64_F3"), + PINCTRL_PIN(DB8500_PIN_F1, "GPIO65_F1"), + PINCTRL_PIN(DB8500_PIN_G3, "GPIO66_G3"), + PINCTRL_PIN(DB8500_PIN_G2, "GPIO67_G2"), + PINCTRL_PIN(DB8500_PIN_E1, "GPIO68_E1"), + PINCTRL_PIN(DB8500_PIN_E2, "GPIO69_E2"), + PINCTRL_PIN(DB8500_PIN_G5, "GPIO70_G5"), + PINCTRL_PIN(DB8500_PIN_G4, "GPIO71_G4"), + PINCTRL_PIN(DB8500_PIN_H4, "GPIO72_H4"), + PINCTRL_PIN(DB8500_PIN_H3, "GPIO73_H3"), + PINCTRL_PIN(DB8500_PIN_J3, "GPIO74_J3"), + PINCTRL_PIN(DB8500_PIN_H2, "GPIO75_H2"), + PINCTRL_PIN(DB8500_PIN_J2, "GPIO76_J2"), + PINCTRL_PIN(DB8500_PIN_H1, "GPIO77_H1"), + PINCTRL_PIN(DB8500_PIN_F4, "GPIO78_F4"), + PINCTRL_PIN(DB8500_PIN_E3, "GPIO79_E3"), + PINCTRL_PIN(DB8500_PIN_E4, "GPIO80_E4"), + PINCTRL_PIN(DB8500_PIN_D2, "GPIO81_D2"), + PINCTRL_PIN(DB8500_PIN_C1, "GPIO82_C1"), + PINCTRL_PIN(DB8500_PIN_D3, "GPIO83_D3"), + PINCTRL_PIN(DB8500_PIN_C2, "GPIO84_C2"), + PINCTRL_PIN(DB8500_PIN_D5, "GPIO85_D5"), + PINCTRL_PIN(DB8500_PIN_C6, "GPIO86_C6"), + PINCTRL_PIN(DB8500_PIN_B3, "GPIO87_B3"), + PINCTRL_PIN(DB8500_PIN_C4, "GPIO88_C4"), + PINCTRL_PIN(DB8500_PIN_E6, "GPIO89_E6"), + PINCTRL_PIN(DB8500_PIN_A3, "GPIO90_A3"), + PINCTRL_PIN(DB8500_PIN_B6, "GPIO91_B6"), + PINCTRL_PIN(DB8500_PIN_D6, "GPIO92_D6"), + PINCTRL_PIN(DB8500_PIN_B7, "GPIO93_B7"), + PINCTRL_PIN(DB8500_PIN_D7, "GPIO94_D7"), + PINCTRL_PIN(DB8500_PIN_E8, "GPIO95_E8"), + PINCTRL_PIN(DB8500_PIN_D8, "GPIO96_D8"), + PINCTRL_PIN(DB8500_PIN_D9, "GPIO97_D9"), + /* Hole */ + PINCTRL_PIN(DB8500_PIN_A5, "GPIO128_A5"), + PINCTRL_PIN(DB8500_PIN_B4, "GPIO129_B4"), + PINCTRL_PIN(DB8500_PIN_C8, "GPIO130_C8"), + PINCTRL_PIN(DB8500_PIN_A12, "GPIO131_A12"), + PINCTRL_PIN(DB8500_PIN_C10, "GPIO132_C10"), + PINCTRL_PIN(DB8500_PIN_B10, "GPIO133_B10"), + PINCTRL_PIN(DB8500_PIN_B9, "GPIO134_B9"), + PINCTRL_PIN(DB8500_PIN_A9, "GPIO135_A9"), + PINCTRL_PIN(DB8500_PIN_C7, "GPIO136_C7"), + PINCTRL_PIN(DB8500_PIN_A7, "GPIO137_A7"), + PINCTRL_PIN(DB8500_PIN_C5, "GPIO138_C5"), + PINCTRL_PIN(DB8500_PIN_C9, "GPIO139_C9"), + PINCTRL_PIN(DB8500_PIN_B11, "GPIO140_B11"), + PINCTRL_PIN(DB8500_PIN_C12, "GPIO141_C12"), + PINCTRL_PIN(DB8500_PIN_C11, "GPIO142_C11"), + PINCTRL_PIN(DB8500_PIN_D12, "GPIO143_D12"), + PINCTRL_PIN(DB8500_PIN_B13, "GPIO144_B13"), + PINCTRL_PIN(DB8500_PIN_C13, "GPIO145_C13"), + PINCTRL_PIN(DB8500_PIN_D13, "GPIO146_D13"), + PINCTRL_PIN(DB8500_PIN_C15, "GPIO147_C15"), + PINCTRL_PIN(DB8500_PIN_B16, "GPIO148_B16"), + PINCTRL_PIN(DB8500_PIN_B14, "GPIO149_B14"), + PINCTRL_PIN(DB8500_PIN_C14, "GPIO150_C14"), + PINCTRL_PIN(DB8500_PIN_D17, "GPIO151_D17"), + PINCTRL_PIN(DB8500_PIN_D16, "GPIO152_D16"), + PINCTRL_PIN(DB8500_PIN_B17, "GPIO153_B17"), + PINCTRL_PIN(DB8500_PIN_C16, "GPIO154_C16"), + PINCTRL_PIN(DB8500_PIN_C19, "GPIO155_C19"), + PINCTRL_PIN(DB8500_PIN_C17, "GPIO156_C17"), + PINCTRL_PIN(DB8500_PIN_A18, "GPIO157_A18"), + PINCTRL_PIN(DB8500_PIN_C18, "GPIO158_C18"), + PINCTRL_PIN(DB8500_PIN_B19, "GPIO159_B19"), + PINCTRL_PIN(DB8500_PIN_B20, "GPIO160_B20"), + PINCTRL_PIN(DB8500_PIN_D21, "GPIO161_D21"), + PINCTRL_PIN(DB8500_PIN_D20, "GPIO162_D20"), + PINCTRL_PIN(DB8500_PIN_C20, "GPIO163_C20"), + PINCTRL_PIN(DB8500_PIN_B21, "GPIO164_B21"), + PINCTRL_PIN(DB8500_PIN_C21, "GPIO165_C21"), + PINCTRL_PIN(DB8500_PIN_A22, "GPIO166_A22"), + PINCTRL_PIN(DB8500_PIN_B24, "GPIO167_B24"), + PINCTRL_PIN(DB8500_PIN_C22, "GPIO168_C22"), + PINCTRL_PIN(DB8500_PIN_D22, "GPIO169_D22"), + PINCTRL_PIN(DB8500_PIN_C23, "GPIO170_C23"), + PINCTRL_PIN(DB8500_PIN_D23, "GPIO171_D23"), + /* Hole */ + PINCTRL_PIN(DB8500_PIN_AJ27, "GPIO192_AJ27"), + PINCTRL_PIN(DB8500_PIN_AH27, "GPIO193_AH27"), + PINCTRL_PIN(DB8500_PIN_AF27, "GPIO194_AF27"), + PINCTRL_PIN(DB8500_PIN_AG28, "GPIO195_AG28"), + PINCTRL_PIN(DB8500_PIN_AG26, "GPIO196_AG26"), + PINCTRL_PIN(DB8500_PIN_AH24, "GPIO197_AH24"), + PINCTRL_PIN(DB8500_PIN_AG25, "GPIO198_AG25"), + PINCTRL_PIN(DB8500_PIN_AH23, "GPIO199_AH23"), + PINCTRL_PIN(DB8500_PIN_AH26, "GPIO200_AH26"), + PINCTRL_PIN(DB8500_PIN_AF24, "GPIO201_AF24"), + PINCTRL_PIN(DB8500_PIN_AF25, "GPIO202_AF25"), + PINCTRL_PIN(DB8500_PIN_AE23, "GPIO203_AE23"), + PINCTRL_PIN(DB8500_PIN_AF23, "GPIO204_AF23"), + PINCTRL_PIN(DB8500_PIN_AG23, "GPIO205_AG23"), + PINCTRL_PIN(DB8500_PIN_AG24, "GPIO206_AG24"), + PINCTRL_PIN(DB8500_PIN_AJ23, "GPIO207_AJ23"), + PINCTRL_PIN(DB8500_PIN_AH16, "GPIO208_AH16"), + PINCTRL_PIN(DB8500_PIN_AG15, "GPIO209_AG15"), + PINCTRL_PIN(DB8500_PIN_AJ15, "GPIO210_AJ15"), + PINCTRL_PIN(DB8500_PIN_AG14, "GPIO211_AG14"), + PINCTRL_PIN(DB8500_PIN_AF13, "GPIO212_AF13"), + PINCTRL_PIN(DB8500_PIN_AG13, "GPIO213_AG13"), + PINCTRL_PIN(DB8500_PIN_AH15, "GPIO214_AH15"), + PINCTRL_PIN(DB8500_PIN_AH13, "GPIO215_AH13"), + PINCTRL_PIN(DB8500_PIN_AG12, "GPIO216_AG12"), + PINCTRL_PIN(DB8500_PIN_AH12, "GPIO217_AH12"), + PINCTRL_PIN(DB8500_PIN_AH11, "GPIO218_AH11"), + PINCTRL_PIN(DB8500_PIN_AG10, "GPIO219_AG10"), + PINCTRL_PIN(DB8500_PIN_AH10, "GPIO220_AH10"), + PINCTRL_PIN(DB8500_PIN_AJ11, "GPIO221_AJ11"), + PINCTRL_PIN(DB8500_PIN_AJ9, "GPIO222_AJ9"), + PINCTRL_PIN(DB8500_PIN_AH9, "GPIO223_AH9"), + PINCTRL_PIN(DB8500_PIN_AG9, "GPIO224_AG9"), + PINCTRL_PIN(DB8500_PIN_AG8, "GPIO225_AG8"), + PINCTRL_PIN(DB8500_PIN_AF8, "GPIO226_AF8"), + PINCTRL_PIN(DB8500_PIN_AH7, "GPIO227_AH7"), + PINCTRL_PIN(DB8500_PIN_AJ6, "GPIO228_AJ6"), + PINCTRL_PIN(DB8500_PIN_AG7, "GPIO229_AG7"), + PINCTRL_PIN(DB8500_PIN_AF7, "GPIO230_AF7"), + /* Hole */ + PINCTRL_PIN(DB8500_PIN_AF28, "GPIO256_AF28"), + PINCTRL_PIN(DB8500_PIN_AE29, "GPIO257_AE29"), + PINCTRL_PIN(DB8500_PIN_AD29, "GPIO258_AD29"), + PINCTRL_PIN(DB8500_PIN_AC29, "GPIO259_AC29"), + PINCTRL_PIN(DB8500_PIN_AD28, "GPIO260_AD28"), + PINCTRL_PIN(DB8500_PIN_AD26, "GPIO261_AD26"), + PINCTRL_PIN(DB8500_PIN_AE26, "GPIO262_AE26"), + PINCTRL_PIN(DB8500_PIN_AG29, "GPIO263_AG29"), + PINCTRL_PIN(DB8500_PIN_AE27, "GPIO264_AE27"), + PINCTRL_PIN(DB8500_PIN_AD27, "GPIO265_AD27"), + PINCTRL_PIN(DB8500_PIN_AC28, "GPIO266_AC28"), + PINCTRL_PIN(DB8500_PIN_AC27, "GPIO267_AC27"), +}; + +#define DB8500_GPIO_RANGE(a, b, c) { .name = "DB8500", .id = a, .base = b, \ + .pin_base = b, .npins = c } + +/* + * This matches the 32-pin gpio chips registered by the GPIO portion. This + * cannot be const since we assign the struct gpio_chip * pointer at runtime. + */ +static struct pinctrl_gpio_range nmk_db8500_ranges[] = { + DB8500_GPIO_RANGE(0, 0, 32), + DB8500_GPIO_RANGE(1, 32, 5), + DB8500_GPIO_RANGE(2, 64, 32), + DB8500_GPIO_RANGE(3, 96, 2), + DB8500_GPIO_RANGE(4, 128, 32), + DB8500_GPIO_RANGE(5, 160, 12), + DB8500_GPIO_RANGE(6, 192, 32), + DB8500_GPIO_RANGE(7, 224, 7), + DB8500_GPIO_RANGE(8, 256, 12), +}; + +/* + * Read the pin group names like this: + * u0_a_1 = first groups of pins for uart0 on alt function a + * i2c2_b_2 = second group of pins for i2c2 on alt function b + * + * The groups are arranged as sets per altfunction column, so we can + * mux in one group at a time by selecting the same altfunction for them + * all. When functions require pins on different altfunctions, you need + * to combine several groups. + */ + +/* Altfunction A column */ +static const unsigned u0_a_1_pins[] = { DB8500_PIN_AJ5, DB8500_PIN_AJ3, + DB8500_PIN_AH4, DB8500_PIN_AH3 }; +static const unsigned u1rxtx_a_1_pins[] = { DB8500_PIN_AH6, DB8500_PIN_AG6 }; +static const unsigned u1ctsrts_a_1_pins[] = { DB8500_PIN_AF6, DB8500_PIN_AG5 }; +/* Image processor I2C line, this is driven by image processor firmware */ +static const unsigned ipi2c_a_1_pins[] = { DB8500_PIN_AD5, DB8500_PIN_AE4 }; +static const unsigned ipi2c_a_2_pins[] = { DB8500_PIN_AF5, DB8500_PIN_AG4 }; +/* MSP0 can only be on these pins, but TXD and RXD can be flipped */ +static const unsigned msp0txrx_a_1_pins[] = { DB8500_PIN_AC4, DB8500_PIN_AC3 }; +static const unsigned msp0tfstck_a_1_pins[] = { DB8500_PIN_AF3, DB8500_PIN_AE3 }; +static const unsigned msp0rfsrck_a_1_pins[] = { DB8500_PIN_AD3, DB8500_PIN_AD4 }; +/* Basic pins of the MMC/SD card 0 interface */ +static const unsigned mc0_a_1_pins[] = { DB8500_PIN_AC2, DB8500_PIN_AC1, + DB8500_PIN_AB4, DB8500_PIN_AA3, DB8500_PIN_AA4, DB8500_PIN_AB2, + DB8500_PIN_Y4, DB8500_PIN_Y2, DB8500_PIN_AA2, DB8500_PIN_AA1 }; +/* Often only 4 bits are used, then these are not needed (only used for MMC) */ +static const unsigned mc0_dat47_a_1_pins[] = { DB8500_PIN_W2, DB8500_PIN_W3, + DB8500_PIN_V3, DB8500_PIN_V2}; +static const unsigned mc0dat31dir_a_1_pins[] = { DB8500_PIN_AB3 }; +/* MSP1 can only be on these pins, but TXD and RXD can be flipped */ +static const unsigned msp1txrx_a_1_pins[] = { DB8500_PIN_AF2, DB8500_PIN_AG2 }; +static const unsigned msp1_a_1_pins[] = { DB8500_PIN_AE1, DB8500_PIN_AE2 }; +/* LCD interface */ +static const unsigned lcdb_a_1_pins[] = { DB8500_PIN_F3, DB8500_PIN_F1, + DB8500_PIN_G3, DB8500_PIN_G2 }; +static const unsigned lcdvsi0_a_1_pins[] = { DB8500_PIN_E1 }; +static const unsigned lcdvsi1_a_1_pins[] = { DB8500_PIN_E2 }; +static const unsigned lcd_d0_d7_a_1_pins[] = { + DB8500_PIN_G5, DB8500_PIN_G4, DB8500_PIN_H4, DB8500_PIN_H3, + DB8500_PIN_J3, DB8500_PIN_H2, DB8500_PIN_J2, DB8500_PIN_H1 }; +/* D8 thru D11 often used as TVOUT lines */ +static const unsigned lcd_d8_d11_a_1_pins[] = { DB8500_PIN_F4, + DB8500_PIN_E3, DB8500_PIN_E4, DB8500_PIN_D2 }; +static const unsigned lcd_d12_d23_a_1_pins[] = { + DB8500_PIN_C1, DB8500_PIN_D3, DB8500_PIN_C2, DB8500_PIN_D5, + DB8500_PIN_C6, DB8500_PIN_B3, DB8500_PIN_C4, DB8500_PIN_E6, + DB8500_PIN_A3, DB8500_PIN_B6, DB8500_PIN_D6, DB8500_PIN_B7 }; +static const unsigned kp_a_1_pins[] = { DB8500_PIN_D7, DB8500_PIN_E8, + DB8500_PIN_D8, DB8500_PIN_D9 }; +static const unsigned kpskaskb_a_1_pins[] = { DB8500_PIN_D17, DB8500_PIN_D16 }; +static const unsigned kp_a_2_pins[] = { + DB8500_PIN_B17, DB8500_PIN_C16, DB8500_PIN_C19, DB8500_PIN_C17, + DB8500_PIN_A18, DB8500_PIN_C18, DB8500_PIN_B19, DB8500_PIN_B20, + DB8500_PIN_D21, DB8500_PIN_D20, DB8500_PIN_C20, DB8500_PIN_B21, + DB8500_PIN_C21, DB8500_PIN_A22, DB8500_PIN_B24, DB8500_PIN_C22 }; +/* MC2 has 8 data lines and no direction control, so only for (e)MMC */ +static const unsigned mc2_a_1_pins[] = { DB8500_PIN_A5, DB8500_PIN_B4, + DB8500_PIN_C8, DB8500_PIN_A12, DB8500_PIN_C10, DB8500_PIN_B10, + DB8500_PIN_B9, DB8500_PIN_A9, DB8500_PIN_C7, DB8500_PIN_A7, + DB8500_PIN_C5 }; +static const unsigned ssp1_a_1_pins[] = { DB8500_PIN_C9, DB8500_PIN_B11, + DB8500_PIN_C12, DB8500_PIN_C11 }; +static const unsigned ssp0_a_1_pins[] = { DB8500_PIN_D12, DB8500_PIN_B13, + DB8500_PIN_C13, DB8500_PIN_D13 }; +static const unsigned i2c0_a_1_pins[] = { DB8500_PIN_C15, DB8500_PIN_B16 }; +/* + * Image processor GPIO pins are named "ipgpio" and have their own + * numberspace + */ +static const unsigned ipgpio0_a_1_pins[] = { DB8500_PIN_B14 }; +static const unsigned ipgpio1_a_1_pins[] = { DB8500_PIN_C14 }; +/* Three modem pins named RF_PURn, MODEM_STATE and MODEM_PWREN */ +static const unsigned modem_a_1_pins[] = { DB8500_PIN_D22, DB8500_PIN_C23, + DB8500_PIN_D23 }; +/* + * This MSP cannot switch RX and TX, SCK in a separate group since this + * seems to be optional. + */ +static const unsigned msp2sck_a_1_pins[] = { DB8500_PIN_AJ27 }; +static const unsigned msp2_a_1_pins[] = { DB8500_PIN_AH27, DB8500_PIN_AF27, + DB8500_PIN_AG28, DB8500_PIN_AG26 }; +static const unsigned mc4_a_1_pins[] = { DB8500_PIN_AH24, DB8500_PIN_AG25, + DB8500_PIN_AH23, DB8500_PIN_AH26, DB8500_PIN_AF24, DB8500_PIN_AF25, + DB8500_PIN_AE23, DB8500_PIN_AF23, DB8500_PIN_AG23, DB8500_PIN_AG24, + DB8500_PIN_AJ23 }; +/* MC1 has only 4 data pins, designed for SD or SDIO exclusively */ +static const unsigned mc1_a_1_pins[] = { DB8500_PIN_AH16, DB8500_PIN_AG15, + DB8500_PIN_AJ15, DB8500_PIN_AG14, DB8500_PIN_AF13, DB8500_PIN_AG13, + DB8500_PIN_AH15 }; +static const unsigned mc1dir_a_1_pins[] = { DB8500_PIN_AH13, DB8500_PIN_AG12, + DB8500_PIN_AH12, DB8500_PIN_AH11 }; +static const unsigned hsir_a_1_pins[] = { DB8500_PIN_AG10, DB8500_PIN_AH10 }; +static const unsigned hsit_a_1_pins[] = { DB8500_PIN_AJ11, DB8500_PIN_AJ9, + DB8500_PIN_AH9, DB8500_PIN_AG9, DB8500_PIN_AG8, DB8500_PIN_AF8 }; +static const unsigned clkout_a_1_pins[] = { DB8500_PIN_AH7, DB8500_PIN_AJ6 }; +static const unsigned clkout_a_2_pins[] = { DB8500_PIN_AG7, DB8500_PIN_AF7 }; +static const unsigned usb_a_1_pins[] = { DB8500_PIN_AF28, DB8500_PIN_AE29, + DB8500_PIN_AD29, DB8500_PIN_AC29, DB8500_PIN_AD28, DB8500_PIN_AD26, + DB8500_PIN_AE26, DB8500_PIN_AG29, DB8500_PIN_AE27, DB8500_PIN_AD27, + DB8500_PIN_AC28, DB8500_PIN_AC27 }; + +/* Altfunction B column */ +static const unsigned trig_b_1_pins[] = { DB8500_PIN_AJ5, DB8500_PIN_AJ3 }; +static const unsigned i2c4_b_1_pins[] = { DB8500_PIN_AH6, DB8500_PIN_AG6 }; +static const unsigned i2c1_b_1_pins[] = { DB8500_PIN_AF6, DB8500_PIN_AG5 }; +static const unsigned i2c2_b_1_pins[] = { DB8500_PIN_AD5, DB8500_PIN_AE4 }; +static const unsigned i2c2_b_2_pins[] = { DB8500_PIN_AF5, DB8500_PIN_AG4 }; +static const unsigned msp0txrx_b_1_pins[] = { DB8500_PIN_AC4, DB8500_PIN_AC3 }; +static const unsigned i2c1_b_2_pins[] = { DB8500_PIN_AD3, DB8500_PIN_AD4 }; +/* Just RX and TX for UART2 */ +static const unsigned u2rxtx_b_1_pins[] = { DB8500_PIN_AC2, DB8500_PIN_AC1 }; +static const unsigned uartmodtx_b_1_pins[] = { DB8500_PIN_AB4 }; +static const unsigned msp0sck_b_1_pins[] = { DB8500_PIN_AB3 }; +static const unsigned uartmodrx_b_1_pins[] = { DB8500_PIN_AA3 }; +static const unsigned stmmod_b_1_pins[] = { DB8500_PIN_AA4, DB8500_PIN_Y4, + DB8500_PIN_Y2, DB8500_PIN_AA2, DB8500_PIN_AA1 }; +static const unsigned uartmodrx_b_2_pins[] = { DB8500_PIN_AB2 }; +static const unsigned spi3_b_1_pins[] = { DB8500_PIN_W2, DB8500_PIN_W3, + DB8500_PIN_V3, DB8500_PIN_V2 }; +static const unsigned msp1txrx_b_1_pins[] = { DB8500_PIN_AF2, DB8500_PIN_AG2 }; +static const unsigned kp_b_1_pins[] = { DB8500_PIN_F3, DB8500_PIN_F1, + DB8500_PIN_G3, DB8500_PIN_G2, DB8500_PIN_E1, DB8500_PIN_E2, + DB8500_PIN_G5, DB8500_PIN_G4, DB8500_PIN_H4, DB8500_PIN_H3, + DB8500_PIN_J3, DB8500_PIN_H2, DB8500_PIN_J2, DB8500_PIN_H1, + DB8500_PIN_F4, DB8500_PIN_E3, DB8500_PIN_E4, DB8500_PIN_D2, + DB8500_PIN_C1, DB8500_PIN_D3, DB8500_PIN_C2, DB8500_PIN_D5 }; +static const unsigned sm_b_1_pins[] = { DB8500_PIN_C6, DB8500_PIN_B3, + DB8500_PIN_C4, DB8500_PIN_E6, DB8500_PIN_A3, DB8500_PIN_B6, + DB8500_PIN_D6, DB8500_PIN_B7, DB8500_PIN_D7, DB8500_PIN_D8, + DB8500_PIN_D9, DB8500_PIN_A5, DB8500_PIN_B4, DB8500_PIN_C8, + DB8500_PIN_A12, DB8500_PIN_C10, DB8500_PIN_B10, DB8500_PIN_B9, + DB8500_PIN_A9, DB8500_PIN_C7, DB8500_PIN_A7, DB8500_PIN_C5, + DB8500_PIN_C9, DB8500_PIN_B14 }; +/* This chip select pin can be "ps0" in alt B so have it separately */ +static const unsigned smcs0_b_1_pins[] = { DB8500_PIN_E8 }; +static const unsigned ipgpio7_b_1_pins[] = { DB8500_PIN_B11 }; +static const unsigned ipgpio2_b_1_pins[] = { DB8500_PIN_C12 }; +static const unsigned ipgpio3_b_1_pins[] = { DB8500_PIN_C11 }; +static const unsigned lcdaclk_b_1_pins[] = { DB8500_PIN_C14 }; +static const unsigned lcda_b_1_pins[] = { DB8500_PIN_D22, + DB8500_PIN_C23, DB8500_PIN_D23 }; +static const unsigned lcd_b_1_pins[] = { DB8500_PIN_D17, DB8500_PIN_D16, + DB8500_PIN_B17, DB8500_PIN_C16, DB8500_PIN_C19, DB8500_PIN_C17, + DB8500_PIN_A18, DB8500_PIN_C18, DB8500_PIN_B19, DB8500_PIN_B20, + DB8500_PIN_D21, DB8500_PIN_D20, DB8500_PIN_C20, DB8500_PIN_B21, + DB8500_PIN_C21, DB8500_PIN_A22, DB8500_PIN_B24, DB8500_PIN_C22 }; +static const unsigned ddrtrig_b_1_pins[] = { DB8500_PIN_AJ27 }; +static const unsigned pwl_b_1_pins[] = { DB8500_PIN_AF25 }; +static const unsigned spi1_b_1_pins[] = { DB8500_PIN_AG15, DB8500_PIN_AF13, + DB8500_PIN_AG13, DB8500_PIN_AH15 }; +static const unsigned mc3_b_1_pins[] = { DB8500_PIN_AH13, DB8500_PIN_AG12, + DB8500_PIN_AH12, DB8500_PIN_AH11, DB8500_PIN_AG10, DB8500_PIN_AH10, + DB8500_PIN_AJ11, DB8500_PIN_AJ9, DB8500_PIN_AH9, DB8500_PIN_AG9, + DB8500_PIN_AG8 }; +static const unsigned pwl_b_2_pins[] = { DB8500_PIN_AF8 }; +static const unsigned pwl_b_3_pins[] = { DB8500_PIN_AG7 }; +static const unsigned pwl_b_4_pins[] = { DB8500_PIN_AF7 }; + +/* Altfunction C column */ +static const unsigned ipjtag_c_1_pins[] = { DB8500_PIN_AJ5, DB8500_PIN_AJ3, + DB8500_PIN_AH4, DB8500_PIN_AH3, DB8500_PIN_AH6 }; +static const unsigned ipgpio6_c_1_pins[] = { DB8500_PIN_AG6 }; +static const unsigned ipgpio0_c_1_pins[] = { DB8500_PIN_AF6 }; +static const unsigned ipgpio1_c_1_pins[] = { DB8500_PIN_AG5 }; +static const unsigned ipgpio3_c_1_pins[] = { DB8500_PIN_AF5 }; +static const unsigned ipgpio2_c_1_pins[] = { DB8500_PIN_AG4 }; +static const unsigned slim0_c_1_pins[] = { DB8500_PIN_AD3, DB8500_PIN_AD4 }; +/* Optional 4-bit Memory Stick interface */ +static const unsigned ms_c_1_pins[] = { DB8500_PIN_AC2, DB8500_PIN_AC1, + DB8500_PIN_AB3, DB8500_PIN_AA3, DB8500_PIN_AA4, DB8500_PIN_AB2, + DB8500_PIN_Y4, DB8500_PIN_Y2, DB8500_PIN_AA2, DB8500_PIN_AA1 }; +static const unsigned iptrigout_c_1_pins[] = { DB8500_PIN_AB4 }; +static const unsigned u2rxtx_c_1_pins[] = { DB8500_PIN_W2, DB8500_PIN_W3 }; +static const unsigned u2ctsrts_c_1_pins[] = { DB8500_PIN_V3, DB8500_PIN_V2 }; +static const unsigned u0_c_1_pins[] = { DB8500_PIN_AF2, DB8500_PIN_AE1, + DB8500_PIN_AE2, DB8500_PIN_AG2 }; +static const unsigned ipgpio4_c_1_pins[] = { DB8500_PIN_F3 }; +static const unsigned ipgpio5_c_1_pins[] = { DB8500_PIN_F1 }; +static const unsigned ipgpio6_c_2_pins[] = { DB8500_PIN_G3 }; +static const unsigned ipgpio7_c_1_pins[] = { DB8500_PIN_G2 }; +static const unsigned smcleale_c_1_pins[] = { DB8500_PIN_E1, DB8500_PIN_E2 }; +static const unsigned stmape_c_1_pins[] = { DB8500_PIN_G5, DB8500_PIN_G4, + DB8500_PIN_H4, DB8500_PIN_H3, DB8500_PIN_J3 }; +static const unsigned u2rxtx_c_2_pins[] = { DB8500_PIN_H2, DB8500_PIN_J2 }; +static const unsigned ipgpio2_c_2_pins[] = { DB8500_PIN_F4 }; +static const unsigned ipgpio3_c_2_pins[] = { DB8500_PIN_E3 }; +static const unsigned ipgpio4_c_2_pins[] = { DB8500_PIN_E4 }; +static const unsigned ipgpio5_c_2_pins[] = { DB8500_PIN_D2 }; +static const unsigned mc5_c_1_pins[] = { DB8500_PIN_C6, DB8500_PIN_B3, + DB8500_PIN_C4, DB8500_PIN_E6, DB8500_PIN_A3, DB8500_PIN_B6, + DB8500_PIN_D6, DB8500_PIN_B7, DB8500_PIN_D7, DB8500_PIN_D8, + DB8500_PIN_D9 }; +static const unsigned mc2rstn_c_1_pins[] = { DB8500_PIN_C8 }; +static const unsigned kp_c_1_pins[] = { DB8500_PIN_C9, DB8500_PIN_B11, + DB8500_PIN_C12, DB8500_PIN_C11, DB8500_PIN_D17, DB8500_PIN_D16, + DB8500_PIN_C23, DB8500_PIN_D23 }; +static const unsigned smps1_c_1_pins[] = { DB8500_PIN_B14 }; +static const unsigned u2rxtx_c_3_pins[] = { DB8500_PIN_B17, DB8500_PIN_C16 }; +static const unsigned stmape_c_2_pins[] = { DB8500_PIN_C19, DB8500_PIN_C17, + DB8500_PIN_A18, DB8500_PIN_C18, DB8500_PIN_B19 }; +static const unsigned uartmodrx_c_1_pins[] = { DB8500_PIN_D21 }; +static const unsigned uartmodtx_c_1_pins[] = { DB8500_PIN_D20 }; +static const unsigned stmmod_c_1_pins[] = { DB8500_PIN_C20, DB8500_PIN_B21, + DB8500_PIN_C21, DB8500_PIN_A22, DB8500_PIN_B24 }; +static const unsigned usbsim_c_1_pins[] = { DB8500_PIN_D22 }; +static const unsigned mc4rstn_c_1_pins[] = { DB8500_PIN_AF25 }; +static const unsigned clkout_c_1_pins[] = { DB8500_PIN_AH13, DB8500_PIN_AH12 }; +static const unsigned i2c3_c_1_pins[] = { DB8500_PIN_AG12, DB8500_PIN_AH11 }; +static const unsigned spi0_c_1_pins[] = { DB8500_PIN_AH10, DB8500_PIN_AH9, + DB8500_PIN_AG9, DB8500_PIN_AG8 }; +static const unsigned usbsim_c_2_pins[] = { DB8500_PIN_AF8 }; +static const unsigned i2c3_c_2_pins[] = { DB8500_PIN_AG7, DB8500_PIN_AF7 }; + +/* Other C1 column */ +static const unsigned kp_oc1_1_pins[] = { DB8500_PIN_C6, DB8500_PIN_B3, + DB8500_PIN_C4, DB8500_PIN_E6, DB8500_PIN_A3, DB8500_PIN_B6, + DB8500_PIN_D6, DB8500_PIN_B7 }; +static const unsigned spi2_oc1_1_pins[] = { DB8500_PIN_AH13, DB8500_PIN_AG12, + DB8500_PIN_AH12, DB8500_PIN_AH11 }; + +#define DB8500_PIN_GROUP(a,b) { .name = #a, .pins = a##_pins, \ + .npins = ARRAY_SIZE(a##_pins), .altsetting = b } + +static const struct nmk_pingroup nmk_db8500_groups[] = { + /* Altfunction A column */ + DB8500_PIN_GROUP(u0_a_1, NMK_GPIO_ALT_A), + DB8500_PIN_GROUP(u1rxtx_a_1, NMK_GPIO_ALT_A), + DB8500_PIN_GROUP(u1ctsrts_a_1, NMK_GPIO_ALT_A), + DB8500_PIN_GROUP(ipi2c_a_1, NMK_GPIO_ALT_A), + DB8500_PIN_GROUP(ipi2c_a_2, NMK_GPIO_ALT_A), + DB8500_PIN_GROUP(msp0txrx_a_1, NMK_GPIO_ALT_A), + DB8500_PIN_GROUP(msp0tfstck_a_1, NMK_GPIO_ALT_A), + DB8500_PIN_GROUP(msp0rfsrck_a_1, NMK_GPIO_ALT_A), + DB8500_PIN_GROUP(mc0_a_1, NMK_GPIO_ALT_A), + DB8500_PIN_GROUP(msp1txrx_a_1, NMK_GPIO_ALT_A), + DB8500_PIN_GROUP(msp1_a_1, NMK_GPIO_ALT_A), + DB8500_PIN_GROUP(lcdb_a_1, NMK_GPIO_ALT_A), + DB8500_PIN_GROUP(lcdvsi0_a_1, NMK_GPIO_ALT_A), + DB8500_PIN_GROUP(lcdvsi1_a_1, NMK_GPIO_ALT_A), + DB8500_PIN_GROUP(lcd_d0_d7_a_1, NMK_GPIO_ALT_A), + DB8500_PIN_GROUP(lcd_d8_d11_a_1, NMK_GPIO_ALT_A), + DB8500_PIN_GROUP(lcd_d12_d23_a_1, NMK_GPIO_ALT_A), + DB8500_PIN_GROUP(kp_a_1, NMK_GPIO_ALT_A), + DB8500_PIN_GROUP(mc2_a_1, NMK_GPIO_ALT_A), + DB8500_PIN_GROUP(ssp1_a_1, NMK_GPIO_ALT_A), + DB8500_PIN_GROUP(ssp0_a_1, NMK_GPIO_ALT_A), + DB8500_PIN_GROUP(i2c0_a_1, NMK_GPIO_ALT_A), + DB8500_PIN_GROUP(ipgpio0_a_1, NMK_GPIO_ALT_A), + DB8500_PIN_GROUP(ipgpio1_a_1, NMK_GPIO_ALT_A), + DB8500_PIN_GROUP(msp2sck_a_1, NMK_GPIO_ALT_A), + DB8500_PIN_GROUP(msp2_a_1, NMK_GPIO_ALT_A), + DB8500_PIN_GROUP(mc4_a_1, NMK_GPIO_ALT_A), + DB8500_PIN_GROUP(mc1_a_1, NMK_GPIO_ALT_A), + DB8500_PIN_GROUP(hsir_a_1, NMK_GPIO_ALT_A), + DB8500_PIN_GROUP(hsit_a_1, NMK_GPIO_ALT_A), + DB8500_PIN_GROUP(clkout_a_1, NMK_GPIO_ALT_A), + DB8500_PIN_GROUP(clkout_a_2, NMK_GPIO_ALT_A), + DB8500_PIN_GROUP(usb_a_1, NMK_GPIO_ALT_A), + /* Altfunction B column */ + DB8500_PIN_GROUP(trig_b_1, NMK_GPIO_ALT_B), + DB8500_PIN_GROUP(i2c4_b_1, NMK_GPIO_ALT_B), + DB8500_PIN_GROUP(i2c1_b_1, NMK_GPIO_ALT_B), + DB8500_PIN_GROUP(i2c2_b_1, NMK_GPIO_ALT_B), + DB8500_PIN_GROUP(i2c2_b_2, NMK_GPIO_ALT_B), + DB8500_PIN_GROUP(msp0txrx_b_1, NMK_GPIO_ALT_B), + DB8500_PIN_GROUP(i2c1_b_2, NMK_GPIO_ALT_B), + DB8500_PIN_GROUP(u2rxtx_b_1, NMK_GPIO_ALT_B), + DB8500_PIN_GROUP(uartmodtx_b_1, NMK_GPIO_ALT_B), + DB8500_PIN_GROUP(msp0sck_b_1, NMK_GPIO_ALT_B), + DB8500_PIN_GROUP(uartmodrx_b_1, NMK_GPIO_ALT_B), + DB8500_PIN_GROUP(stmmod_b_1, NMK_GPIO_ALT_B), + DB8500_PIN_GROUP(uartmodrx_b_2, NMK_GPIO_ALT_B), + DB8500_PIN_GROUP(spi3_b_1, NMK_GPIO_ALT_B), + DB8500_PIN_GROUP(msp1txrx_b_1, NMK_GPIO_ALT_B), + DB8500_PIN_GROUP(kp_b_1, NMK_GPIO_ALT_B), + DB8500_PIN_GROUP(sm_b_1, NMK_GPIO_ALT_B), + DB8500_PIN_GROUP(smcs0_b_1, NMK_GPIO_ALT_B), + DB8500_PIN_GROUP(ipgpio7_b_1, NMK_GPIO_ALT_B), + DB8500_PIN_GROUP(ipgpio2_b_1, NMK_GPIO_ALT_B), + DB8500_PIN_GROUP(ipgpio3_b_1, NMK_GPIO_ALT_B), + DB8500_PIN_GROUP(lcdaclk_b_1, NMK_GPIO_ALT_B), + DB8500_PIN_GROUP(lcda_b_1, NMK_GPIO_ALT_B), + DB8500_PIN_GROUP(lcd_b_1, NMK_GPIO_ALT_B), + DB8500_PIN_GROUP(ddrtrig_b_1, NMK_GPIO_ALT_B), + DB8500_PIN_GROUP(pwl_b_1, NMK_GPIO_ALT_B), + DB8500_PIN_GROUP(spi1_b_1, NMK_GPIO_ALT_B), + DB8500_PIN_GROUP(mc3_b_1, NMK_GPIO_ALT_B), + DB8500_PIN_GROUP(pwl_b_2, NMK_GPIO_ALT_B), + DB8500_PIN_GROUP(pwl_b_3, NMK_GPIO_ALT_B), + DB8500_PIN_GROUP(pwl_b_4, NMK_GPIO_ALT_B), + /* Altfunction C column */ + DB8500_PIN_GROUP(ipjtag_c_1, NMK_GPIO_ALT_C), + DB8500_PIN_GROUP(ipgpio6_c_1, NMK_GPIO_ALT_C), + DB8500_PIN_GROUP(ipgpio0_c_1, NMK_GPIO_ALT_C), + DB8500_PIN_GROUP(ipgpio1_c_1, NMK_GPIO_ALT_C), + DB8500_PIN_GROUP(ipgpio3_c_1, NMK_GPIO_ALT_C), + DB8500_PIN_GROUP(ipgpio2_c_1, NMK_GPIO_ALT_C), + DB8500_PIN_GROUP(slim0_c_1, NMK_GPIO_ALT_C), + DB8500_PIN_GROUP(ms_c_1, NMK_GPIO_ALT_C), + DB8500_PIN_GROUP(iptrigout_c_1, NMK_GPIO_ALT_C), + DB8500_PIN_GROUP(u2rxtx_c_1, NMK_GPIO_ALT_C), + DB8500_PIN_GROUP(u2ctsrts_c_1, NMK_GPIO_ALT_C), + DB8500_PIN_GROUP(u0_c_1, NMK_GPIO_ALT_C), + DB8500_PIN_GROUP(ipgpio4_c_1, NMK_GPIO_ALT_C), + DB8500_PIN_GROUP(ipgpio5_c_1, NMK_GPIO_ALT_C), + DB8500_PIN_GROUP(ipgpio6_c_1, NMK_GPIO_ALT_C), + DB8500_PIN_GROUP(ipgpio7_c_1, NMK_GPIO_ALT_C), + DB8500_PIN_GROUP(smcleale_c_1, NMK_GPIO_ALT_C), + DB8500_PIN_GROUP(stmape_c_1, NMK_GPIO_ALT_C), + DB8500_PIN_GROUP(u2rxtx_c_2, NMK_GPIO_ALT_C), + DB8500_PIN_GROUP(ipgpio2_c_2, NMK_GPIO_ALT_C), + DB8500_PIN_GROUP(ipgpio3_c_2, NMK_GPIO_ALT_C), + DB8500_PIN_GROUP(ipgpio4_c_2, NMK_GPIO_ALT_C), + DB8500_PIN_GROUP(ipgpio5_c_2, NMK_GPIO_ALT_C), + DB8500_PIN_GROUP(mc5_c_1, NMK_GPIO_ALT_C), + DB8500_PIN_GROUP(mc2rstn_c_1, NMK_GPIO_ALT_C), + DB8500_PIN_GROUP(kp_c_1, NMK_GPIO_ALT_C), + DB8500_PIN_GROUP(smps1_c_1, NMK_GPIO_ALT_C), + DB8500_PIN_GROUP(u2rxtx_c_3, NMK_GPIO_ALT_C), + DB8500_PIN_GROUP(stmape_c_2, NMK_GPIO_ALT_C), + DB8500_PIN_GROUP(uartmodrx_c_1, NMK_GPIO_ALT_C), + DB8500_PIN_GROUP(uartmodtx_c_1, NMK_GPIO_ALT_C), + DB8500_PIN_GROUP(stmmod_c_1, NMK_GPIO_ALT_C), + DB8500_PIN_GROUP(usbsim_c_1, NMK_GPIO_ALT_C), + DB8500_PIN_GROUP(mc4rstn_c_1, NMK_GPIO_ALT_C), + DB8500_PIN_GROUP(clkout_c_1, NMK_GPIO_ALT_C), + DB8500_PIN_GROUP(i2c3_c_1, NMK_GPIO_ALT_C), + DB8500_PIN_GROUP(spi0_c_1, NMK_GPIO_ALT_C), + DB8500_PIN_GROUP(usbsim_c_2, NMK_GPIO_ALT_C), + DB8500_PIN_GROUP(i2c3_c_2, NMK_GPIO_ALT_C), + /* Other alt C1 column, these are still configured as alt C */ + DB8500_PIN_GROUP(kp_oc1_1, NMK_GPIO_ALT_C), + DB8500_PIN_GROUP(spi2_oc1_1, NMK_GPIO_ALT_C), +}; + +/* We use this macro to define the groups applicable to a function */ +#define DB8500_FUNC_GROUPS(a, b...) \ +static const char * const a##_groups[] = { b }; + +DB8500_FUNC_GROUPS(u0, "u0_a_1", "u0_c_1"); +DB8500_FUNC_GROUPS(u1, "u1rxtx_a_1", "u1ctsrts_a_1"); +/* + * UART2 can be muxed out with just RX/TX in four places, CTS+RTS is however + * only available on two pins in alternative function C + */ +DB8500_FUNC_GROUPS(u2, "u2rxtx_b_1", "u2rxtx_c_1", "u2ctsrts_c_1", + "u2rxtx_c_2", "u2rxtx_c_3"); +DB8500_FUNC_GROUPS(ipi2c, "ipi2c_a_1", "ipi2c_a_2"); +/* + * MSP0 can only be on a certain set of pins, but the TX/RX pins can be + * switched around by selecting the altfunction A or B. The SCK pin is + * only available on the altfunction B. + */ +DB8500_FUNC_GROUPS(msp0, "msp0txrx_a_1", "msp0tfstck_a_1", "msp0rfstck_a_1", + "msp0txrx_b_1", "msp0sck_b_1"); +DB8500_FUNC_GROUPS(mc0, "mc0_a_1"); +/* MSP0 can swap RX/TX like MSP0 but has no SCK pin available */ +DB8500_FUNC_GROUPS(msp1, "msp1txrx_a_1", "msp1_a_1", "msp1txrx_b_1"); +DB8500_FUNC_GROUPS(lcdb, "lcdb_a_1"); +DB8500_FUNC_GROUPS(lcd, "lcdvsi0_a_1", "lcdvsi1_a_1", "lcd_d0_d7_a_1", + "lcd_d8_d11_a_1", "lcd_d12_d23_a_1", "lcd_b_1"); +DB8500_FUNC_GROUPS(kp, "kp_a_1", "kp_b_1", "kp_c_1", "kp_oc1_1"); +DB8500_FUNC_GROUPS(mc2, "mc2_a_1", "mc2rstn_c_1"); +DB8500_FUNC_GROUPS(ssp1, "ssp1_a_1"); +DB8500_FUNC_GROUPS(ssp0, "ssp0_a_1"); +DB8500_FUNC_GROUPS(i2c0, "i2c0_a_1"); +/* The image processor has 8 GPIO pins that can be muxed out */ +DB8500_FUNC_GROUPS(ipgpio, "ipgpio0_a_1", "ipgpio1_a_1", "ipgpio7_b_1", + "ipgpio2_b_1", "ipgpio3_b_1", "ipgpio6_c_1", "ipgpio0_c_1", + "ipgpio1_c_1", "ipgpio3_c_1", "ipgpio2_c_1", "ipgpio4_c_1", + "ipgpio5_c_1", "ipgpio6_c_2", "ipgpio7_c_1", "ipgpio2_c_2", + "ipgpio3_c_2", "ipgpio4_c_2", "ipgpio5_c_2"); +/* MSP2 can not invert the RX/TX pins but has the optional SCK pin */ +DB8500_FUNC_GROUPS(msp2, "msp2sck_a_1", "msp2_a_1"); +DB8500_FUNC_GROUPS(mc4, "mc4_a_1", "mc4rstn_c_1"); +DB8500_FUNC_GROUPS(mc1, "mc1_a_1", "mc1dir_a_1"); +DB8500_FUNC_GROUPS(hsi, "hsir1_a_1", "hsit1_a_1"); +DB8500_FUNC_GROUPS(clkout, "clkout_a_1", "clkout_a_2", "clkout_c_1"); +DB8500_FUNC_GROUPS(usb, "usb_a_1"); +DB8500_FUNC_GROUPS(trig, "trig_b_1"); +DB8500_FUNC_GROUPS(i2c4, "i2c4_b_1"); +DB8500_FUNC_GROUPS(i2c1, "i2c1_b_1", "i2c1_b_2"); +DB8500_FUNC_GROUPS(i2c2, "i2c2_b_1", "i2c2_b_2"); +/* + * The modem UART can output its RX and TX pins in some different places, + * so select one of each. + */ +DB8500_FUNC_GROUPS(uartmod, "uartmodtx_b_1", "uartmodrx_b_1", "uartmodrx_b_2", + "uartmodrx_c_1", "uartmod_tx_c_1"); +DB8500_FUNC_GROUPS(stmmod, "stmmod_b_1", "stmmod_c_1"); +DB8500_FUNC_GROUPS(spi3, "spi3_b_1"); +/* Select between CS0 on alt B or PS1 on alt C */ +DB8500_FUNC_GROUPS(sm, "sm_b_1", "smcs0_b_1", "smcleale_c_1", "smps1_c_1"); +DB8500_FUNC_GROUPS(lcda, "lcdaclk_b_1", "lcda_b_1"); +DB8500_FUNC_GROUPS(ddrtrig, "ddrtrig_b_1"); +DB8500_FUNC_GROUPS(pwl, "pwl_b_1", "pwl_b_2", "pwl_b_3", "pwl_b_4"); +DB8500_FUNC_GROUPS(spi1, "spi1_b_1"); +DB8500_FUNC_GROUPS(mc3, "mc3_b_1"); +DB8500_FUNC_GROUPS(ipjtag, "ipjtag_c_1"); +DB8500_FUNC_GROUPS(slim0, "slim0_c_1"); +DB8500_FUNC_GROUPS(ms, "ms_c_1"); +DB8500_FUNC_GROUPS(iptrigout, "iptrigout_c_1"); +DB8500_FUNC_GROUPS(stmape, "stmape_c_1", "stmape_c_2"); +DB8500_FUNC_GROUPS(mc5, "mc5_c_1"); +DB8500_FUNC_GROUPS(usbsim, "usbsim_c_1", "usbsim_c_2"); +DB8500_FUNC_GROUPS(i2c3, "i2c3_c_1", "i2c3_c_2"); +DB8500_FUNC_GROUPS(spi0, "spi0_c_1"); +DB8500_FUNC_GROUPS(spi2, "spi2_oc1_1"); + +#define FUNCTION(fname) \ + { \ + .name = #fname, \ + .groups = fname##_groups, \ + .ngroups = ARRAY_SIZE(fname##_groups), \ + } + +static const struct nmk_function nmk_db8500_functions[] = { + FUNCTION(u0), + FUNCTION(u1), + FUNCTION(u2), + FUNCTION(ipi2c), + FUNCTION(msp0), + FUNCTION(mc0), + FUNCTION(msp1), + FUNCTION(lcdb), + FUNCTION(lcd), + FUNCTION(kp), + FUNCTION(mc2), + FUNCTION(ssp1), + FUNCTION(ssp0), + FUNCTION(i2c0), + FUNCTION(ipgpio), + FUNCTION(msp2), + FUNCTION(mc4), + FUNCTION(mc1), + FUNCTION(hsi), + FUNCTION(clkout), + FUNCTION(usb), + FUNCTION(trig), + FUNCTION(i2c4), + FUNCTION(i2c1), + FUNCTION(i2c2), + FUNCTION(uartmod), + FUNCTION(stmmod), + FUNCTION(spi3), + FUNCTION(sm), + FUNCTION(lcda), + FUNCTION(ddrtrig), + FUNCTION(pwl), + FUNCTION(spi1), + FUNCTION(mc3), + FUNCTION(ipjtag), + FUNCTION(slim0), + FUNCTION(ms), + FUNCTION(iptrigout), + FUNCTION(stmape), + FUNCTION(mc5), + FUNCTION(usbsim), + FUNCTION(i2c3), + FUNCTION(spi0), + FUNCTION(spi2), +}; + +static const struct nmk_pinctrl_soc_data nmk_db8500_soc = { + .gpio_ranges = nmk_db8500_ranges, + .gpio_num_ranges = ARRAY_SIZE(nmk_db8500_ranges), + .pins = nmk_db8500_pins, + .npins = ARRAY_SIZE(nmk_db8500_pins), + .functions = nmk_db8500_functions, + .nfunctions = ARRAY_SIZE(nmk_db8500_functions), + .groups = nmk_db8500_groups, + .ngroups = ARRAY_SIZE(nmk_db8500_groups), +}; + +void __devinit +nmk_pinctrl_db8500_init(const struct nmk_pinctrl_soc_data **soc) +{ + *soc = &nmk_db8500_soc; +} diff --git a/drivers/gpio/gpio-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c index 9b126b6..b8e01c3 100644 --- a/drivers/gpio/gpio-nomadik.c +++ b/drivers/pinctrl/pinctrl-nomadik.c @@ -24,12 +24,19 @@ #include <linux/irq.h> #include <linux/irqdomain.h> #include <linux/slab.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/pinctrl/pinmux.h> +#include <linux/pinctrl/pinconf.h> +/* Since we request GPIOs from ourself */ +#include <linux/pinctrl/consumer.h> #include <asm/mach/irq.h> #include <plat/pincfg.h> #include <plat/gpio-nomadik.h> +#include "pinctrl-nomadik.h" + /* * The GPIO module in the Nomadik family of Systems-on-Chip is an * AMBA device, managing 32 pins and alternate functions. The logic block @@ -64,6 +71,12 @@ struct nmk_gpio_chip { u32 lowemi; }; +struct nmk_pinctrl { + struct device *dev; + struct pinctrl_dev *pctl; + const struct nmk_pinctrl_soc_data *soc; +}; + static struct nmk_gpio_chip * nmk_gpio_chips[DIV_ROUND_UP(ARCH_NR_GPIOS, NMK_GPIO_PER_CHIP)]; @@ -864,6 +877,25 @@ static int nmk_gpio_init_irq(struct nmk_gpio_chip *nmk_chip) } /* I/O Functions */ + +static int nmk_gpio_request(struct gpio_chip *chip, unsigned offset) +{ + /* + * Map back to global GPIO space and request muxing, the direction + * parameter does not matter for this controller. + */ + int gpio = chip->base + offset; + + return pinctrl_request_gpio(gpio); +} + +static void nmk_gpio_free(struct gpio_chip *chip, unsigned offset) +{ + int gpio = chip->base + offset; + + pinctrl_free_gpio(gpio); +} + static int nmk_gpio_make_input(struct gpio_chip *chip, unsigned offset) { struct nmk_gpio_chip *nmk_chip = @@ -934,14 +966,16 @@ static int nmk_gpio_to_irq(struct gpio_chip *chip, unsigned offset) #include <linux/seq_file.h> -static void nmk_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) +static void nmk_gpio_dbg_show_one(struct seq_file *s, struct gpio_chip *chip, + unsigned offset, unsigned gpio) { - int mode; - unsigned i; - unsigned gpio = chip->base; - int is_out; + const char *label = gpiochip_is_requested(chip, offset); struct nmk_gpio_chip *nmk_chip = container_of(chip, struct nmk_gpio_chip, chip); + int mode; + bool is_out; + bool pull; + u32 bit = 1 << offset; const char *modes[] = { [NMK_GPIO_ALT_GPIO] = "gpio", [NMK_GPIO_ALT_A] = "altA", @@ -950,61 +984,70 @@ static void nmk_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) }; clk_enable(nmk_chip->clk); - - for (i = 0; i < chip->ngpio; i++, gpio++) { - const char *label = gpiochip_is_requested(chip, i); - bool pull; - u32 bit = 1 << i; - - is_out = readl(nmk_chip->addr + NMK_GPIO_DIR) & bit; - pull = !(readl(nmk_chip->addr + NMK_GPIO_PDIS) & bit); - mode = nmk_gpio_get_mode(gpio); - seq_printf(s, " gpio-%-3d (%-20.20s) %s %s %s %s", - gpio, label ?: "(none)", - is_out ? "out" : "in ", - chip->get - ? (chip->get(chip, i) ? "hi" : "lo") - : "? ", - (mode < 0) ? "unknown" : modes[mode], - pull ? "pull" : "none"); - - if (label && !is_out) { - int irq = gpio_to_irq(gpio); - struct irq_desc *desc = irq_to_desc(irq); - - /* This races with request_irq(), set_irq_type(), - * and set_irq_wake() ... but those are "rare". - */ - if (irq >= 0 && desc->action) { - char *trigger; - u32 bitmask = nmk_gpio_get_bitmask(gpio); - - if (nmk_chip->edge_rising & bitmask) - trigger = "edge-rising"; - else if (nmk_chip->edge_falling & bitmask) - trigger = "edge-falling"; - else - trigger = "edge-undefined"; - - seq_printf(s, " irq-%d %s%s", - irq, trigger, - irqd_is_wakeup_set(&desc->irq_data) - ? " wakeup" : ""); - } + is_out = !!(readl(nmk_chip->addr + NMK_GPIO_DIR) & bit); + pull = !(readl(nmk_chip->addr + NMK_GPIO_PDIS) & bit); + mode = nmk_gpio_get_mode(gpio); + + seq_printf(s, " gpio-%-3d (%-20.20s) %s %s %s %s", + gpio, label ?: "(none)", + is_out ? "out" : "in ", + chip->get + ? (chip->get(chip, offset) ? "hi" : "lo") + : "? ", + (mode < 0) ? "unknown" : modes[mode], + pull ? "pull" : "none"); + + if (label && !is_out) { + int irq = gpio_to_irq(gpio); + struct irq_desc *desc = irq_to_desc(irq); + + /* This races with request_irq(), set_irq_type(), + * and set_irq_wake() ... but those are "rare". + */ + if (irq >= 0 && desc->action) { + char *trigger; + u32 bitmask = nmk_gpio_get_bitmask(gpio); + + if (nmk_chip->edge_rising & bitmask) + trigger = "edge-rising"; + else if (nmk_chip->edge_falling & bitmask) + trigger = "edge-falling"; + else + trigger = "edge-undefined"; + + seq_printf(s, " irq-%d %s%s", + irq, trigger, + irqd_is_wakeup_set(&desc->irq_data) + ? " wakeup" : ""); } + } + clk_disable(nmk_chip->clk); +} + +static void nmk_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) +{ + unsigned i; + unsigned gpio = chip->base; + for (i = 0; i < chip->ngpio; i++, gpio++) { + nmk_gpio_dbg_show_one(s, chip, i, gpio); seq_printf(s, "\n"); } - - clk_disable(nmk_chip->clk); } #else +static inline void nmk_gpio_dbg_show_one(struct seq_file *s, + struct gpio_chip *chip, + unsigned offset, unsigned gpio) +{ +} #define nmk_gpio_dbg_show NULL #endif /* This structure is replicated for each GPIO block allocated at probe time */ static struct gpio_chip nmk_gpio_template = { + .request = nmk_gpio_request, + .free = nmk_gpio_free, .direction_input = nmk_gpio_make_input, .get = nmk_gpio_get_input, .direction_output = nmk_gpio_make_output, @@ -1235,7 +1278,9 @@ static int __devinit nmk_gpio_probe(struct platform_device *dev) nmk_chip->lowemi = readl_relaxed(nmk_chip->addr + NMK_GPIO_LOWEMI); clk_disable(nmk_chip->clk); +#ifdef CONFIG_OF_GPIO chip->of_node = np; +#endif ret = gpiochip_add(&nmk_chip->chip); if (ret) @@ -1280,6 +1325,416 @@ out: return ret; } +static int nmk_get_groups_cnt(struct pinctrl_dev *pctldev) +{ + struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev); + + return npct->soc->ngroups; +} + +static const char *nmk_get_group_name(struct pinctrl_dev *pctldev, + unsigned selector) +{ + struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev); + + return npct->soc->groups[selector].name; +} + +static int nmk_get_group_pins(struct pinctrl_dev *pctldev, unsigned selector, + const unsigned **pins, + unsigned *num_pins) +{ + struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev); + + *pins = npct->soc->groups[selector].pins; + *num_pins = npct->soc->groups[selector].npins; + return 0; +} + +static struct pinctrl_gpio_range * +nmk_match_gpio_range(struct pinctrl_dev *pctldev, unsigned offset) +{ + struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev); + int i; + + for (i = 0; i < npct->soc->gpio_num_ranges; i++) { + struct pinctrl_gpio_range *range; + + range = &npct->soc->gpio_ranges[i]; + if (offset >= range->pin_base && + offset <= (range->pin_base + range->npins - 1)) + return range; + } + return NULL; +} + +static void nmk_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s, + unsigned offset) +{ + struct pinctrl_gpio_range *range; + struct gpio_chip *chip; + + range = nmk_match_gpio_range(pctldev, offset); + if (!range || !range->gc) { + seq_printf(s, "invalid pin offset"); + return; + } + chip = range->gc; + nmk_gpio_dbg_show_one(s, chip, offset - chip->base, offset); +} + +static struct pinctrl_ops nmk_pinctrl_ops = { + .get_groups_count = nmk_get_groups_cnt, + .get_group_name = nmk_get_group_name, + .get_group_pins = nmk_get_group_pins, + .pin_dbg_show = nmk_pin_dbg_show, +}; + +static int nmk_pmx_get_funcs_cnt(struct pinctrl_dev *pctldev) +{ + struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev); + + return npct->soc->nfunctions; +} + +static const char *nmk_pmx_get_func_name(struct pinctrl_dev *pctldev, + unsigned function) +{ + struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev); + + return npct->soc->functions[function].name; +} + +static int nmk_pmx_get_func_groups(struct pinctrl_dev *pctldev, + unsigned function, + const char * const **groups, + unsigned * const num_groups) +{ + struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev); + + *groups = npct->soc->functions[function].groups; + *num_groups = npct->soc->functions[function].ngroups; + + return 0; +} + +static int nmk_pmx_enable(struct pinctrl_dev *pctldev, unsigned function, + unsigned group) +{ + struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev); + const struct nmk_pingroup *g; + static unsigned int slpm[NUM_BANKS]; + unsigned long flags; + bool glitch; + int ret = -EINVAL; + int i; + + g = &npct->soc->groups[group]; + + if (g->altsetting < 0) + return -EINVAL; + + dev_dbg(npct->dev, "enable group %s, %u pins\n", g->name, g->npins); + + /* Handle this special glitch on altfunction C */ + glitch = (g->altsetting == NMK_GPIO_ALT_C); + + if (glitch) { + spin_lock_irqsave(&nmk_gpio_slpm_lock, flags); + + /* Initially don't put any pins to sleep when switching */ + memset(slpm, 0xff, sizeof(slpm)); + + /* + * Then mask the pins that need to be sleeping now when we're + * switching to the ALT C function. + */ + for (i = 0; i < g->npins; i++) + slpm[g->pins[i] / NMK_GPIO_PER_CHIP] &= ~BIT(g->pins[i]); + nmk_gpio_glitch_slpm_init(slpm); + } + + for (i = 0; i < g->npins; i++) { + struct pinctrl_gpio_range *range; + struct nmk_gpio_chip *nmk_chip; + struct gpio_chip *chip; + unsigned bit; + + range = nmk_match_gpio_range(pctldev, g->pins[i]); + if (!range) { + dev_err(npct->dev, + "invalid pin offset %d in group %s at index %d\n", + g->pins[i], g->name, i); + goto out_glitch; + } + if (!range->gc) { + dev_err(npct->dev, "GPIO chip missing in range for pin offset %d in group %s at index %d\n", + g->pins[i], g->name, i); + goto out_glitch; + } + chip = range->gc; + nmk_chip = container_of(chip, struct nmk_gpio_chip, chip); + dev_dbg(npct->dev, "setting pin %d to altsetting %d\n", g->pins[i], g->altsetting); + + clk_enable(nmk_chip->clk); + bit = g->pins[i] % NMK_GPIO_PER_CHIP; + /* + * If the pin is switching to altfunc, and there was an + * interrupt installed on it which has been lazy disabled, + * actually mask the interrupt to prevent spurious interrupts + * that would occur while the pin is under control of the + * peripheral. Only SKE does this. + */ + nmk_gpio_disable_lazy_irq(nmk_chip, bit); + + __nmk_gpio_set_mode_safe(nmk_chip, bit, g->altsetting, glitch); + clk_disable(nmk_chip->clk); + } + + /* When all pins are successfully reconfigured we get here */ + ret = 0; + +out_glitch: + if (glitch) { + nmk_gpio_glitch_slpm_restore(slpm); + spin_unlock_irqrestore(&nmk_gpio_slpm_lock, flags); + } + + return ret; +} + +static void nmk_pmx_disable(struct pinctrl_dev *pctldev, + unsigned function, unsigned group) +{ + struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev); + const struct nmk_pingroup *g; + + g = &npct->soc->groups[group]; + + if (g->altsetting < 0) + return; + + /* Poke out the mux, set the pin to some default state? */ + dev_dbg(npct->dev, "disable group %s, %u pins\n", g->name, g->npins); +} + +int nmk_gpio_request_enable(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, + unsigned offset) +{ + struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev); + struct nmk_gpio_chip *nmk_chip; + struct gpio_chip *chip; + unsigned bit; + + if (!range) { + dev_err(npct->dev, "invalid range\n"); + return -EINVAL; + } + if (!range->gc) { + dev_err(npct->dev, "missing GPIO chip in range\n"); + return -EINVAL; + } + chip = range->gc; + nmk_chip = container_of(chip, struct nmk_gpio_chip, chip); + + dev_dbg(npct->dev, "enable pin %u as GPIO\n", offset); + + clk_enable(nmk_chip->clk); + bit = offset % NMK_GPIO_PER_CHIP; + /* There is no glitch when converting any pin to GPIO */ + __nmk_gpio_set_mode(nmk_chip, bit, NMK_GPIO_ALT_GPIO); + clk_disable(nmk_chip->clk); + + return 0; +} + +void nmk_gpio_disable_free(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, + unsigned offset) +{ + struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev); + + dev_dbg(npct->dev, "disable pin %u as GPIO\n", offset); + /* Set the pin to some default state, GPIO is usually default */ +} + +static struct pinmux_ops nmk_pinmux_ops = { + .get_functions_count = nmk_pmx_get_funcs_cnt, + .get_function_name = nmk_pmx_get_func_name, + .get_function_groups = nmk_pmx_get_func_groups, + .enable = nmk_pmx_enable, + .disable = nmk_pmx_disable, + .gpio_request_enable = nmk_gpio_request_enable, + .gpio_disable_free = nmk_gpio_disable_free, +}; + +int nmk_pin_config_get(struct pinctrl_dev *pctldev, + unsigned pin, + unsigned long *config) +{ + /* Not implemented */ + return -EINVAL; +} + +int nmk_pin_config_set(struct pinctrl_dev *pctldev, + unsigned pin, + unsigned long config) +{ + static const char *pullnames[] = { + [NMK_GPIO_PULL_NONE] = "none", + [NMK_GPIO_PULL_UP] = "up", + [NMK_GPIO_PULL_DOWN] = "down", + [3] /* illegal */ = "??" + }; + static const char *slpmnames[] = { + [NMK_GPIO_SLPM_INPUT] = "input/wakeup", + [NMK_GPIO_SLPM_NOCHANGE] = "no-change/no-wakeup", + }; + struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev); + struct nmk_gpio_chip *nmk_chip; + struct pinctrl_gpio_range *range; + struct gpio_chip *chip; + unsigned bit; + + /* + * The pin config contains pin number and altfunction fields, here + * we just ignore that part. It's being handled by the framework and + * pinmux callback respectively. + */ + pin_cfg_t cfg = (pin_cfg_t) config; + int pull = PIN_PULL(cfg); + int slpm = PIN_SLPM(cfg); + int output = PIN_DIR(cfg); + int val = PIN_VAL(cfg); + bool lowemi = PIN_LOWEMI(cfg); + bool gpiomode = PIN_GPIOMODE(cfg); + bool sleep = PIN_SLEEPMODE(cfg); + + range = nmk_match_gpio_range(pctldev, pin); + if (!range) { + dev_err(npct->dev, "invalid pin offset %d\n", pin); + return -EINVAL; + } + if (!range->gc) { + dev_err(npct->dev, "GPIO chip missing in range for pin %d\n", + pin); + return -EINVAL; + } + chip = range->gc; + nmk_chip = container_of(chip, struct nmk_gpio_chip, chip); + + if (sleep) { + int slpm_pull = PIN_SLPM_PULL(cfg); + int slpm_output = PIN_SLPM_DIR(cfg); + int slpm_val = PIN_SLPM_VAL(cfg); + + /* All pins go into GPIO mode at sleep */ + gpiomode = true; + + /* + * The SLPM_* values are normal values + 1 to allow zero to + * mean "same as normal". + */ + if (slpm_pull) + pull = slpm_pull - 1; + if (slpm_output) + output = slpm_output - 1; + if (slpm_val) + val = slpm_val - 1; + + dev_dbg(nmk_chip->chip.dev, "pin %d: sleep pull %s, dir %s, val %s\n", + pin, + slpm_pull ? pullnames[pull] : "same", + slpm_output ? (output ? "output" : "input") : "same", + slpm_val ? (val ? "high" : "low") : "same"); + } + + dev_dbg(nmk_chip->chip.dev, "pin %d [%#lx]: pull %s, slpm %s (%s%s), lowemi %s\n", + pin, cfg, pullnames[pull], slpmnames[slpm], + output ? "output " : "input", + output ? (val ? "high" : "low") : "", + lowemi ? "on" : "off" ); + + clk_enable(nmk_chip->clk); + bit = pin % NMK_GPIO_PER_CHIP; + if (gpiomode) + /* No glitch when going to GPIO mode */ + __nmk_gpio_set_mode(nmk_chip, bit, NMK_GPIO_ALT_GPIO); + if (output) + __nmk_gpio_make_output(nmk_chip, bit, val); + else { + __nmk_gpio_make_input(nmk_chip, bit); + __nmk_gpio_set_pull(nmk_chip, bit, pull); + } + /* TODO: isn't this only applicable on output pins? */ + __nmk_gpio_set_lowemi(nmk_chip, bit, lowemi); + + __nmk_gpio_set_slpm(nmk_chip, bit, slpm); + clk_disable(nmk_chip->clk); + return 0; +} + +static struct pinconf_ops nmk_pinconf_ops = { + .pin_config_get = nmk_pin_config_get, + .pin_config_set = nmk_pin_config_set, +}; + +static struct pinctrl_desc nmk_pinctrl_desc = { + .name = "pinctrl-nomadik", + .pctlops = &nmk_pinctrl_ops, + .pmxops = &nmk_pinmux_ops, + .confops = &nmk_pinconf_ops, + .owner = THIS_MODULE, +}; + +static int __devinit nmk_pinctrl_probe(struct platform_device *pdev) +{ + const struct platform_device_id *platid = platform_get_device_id(pdev); + struct nmk_pinctrl *npct; + int i; + + npct = devm_kzalloc(&pdev->dev, sizeof(*npct), GFP_KERNEL); + if (!npct) + return -ENOMEM; + + /* Poke in other ASIC variants here */ + if (platid->driver_data == PINCTRL_NMK_DB8500) + nmk_pinctrl_db8500_init(&npct->soc); + + /* + * We need all the GPIO drivers to probe FIRST, or we will not be able + * to obtain references to the struct gpio_chip * for them, and we + * need this to proceed. + */ + for (i = 0; i < npct->soc->gpio_num_ranges; i++) { + if (!nmk_gpio_chips[i]) { + dev_warn(&pdev->dev, "GPIO chip %d not registered yet\n", i); + devm_kfree(&pdev->dev, npct); + return -EPROBE_DEFER; + } + npct->soc->gpio_ranges[i].gc = &nmk_gpio_chips[i]->chip; + } + + nmk_pinctrl_desc.pins = npct->soc->pins; + nmk_pinctrl_desc.npins = npct->soc->npins; + npct->dev = &pdev->dev; + npct->pctl = pinctrl_register(&nmk_pinctrl_desc, &pdev->dev, npct); + if (!npct->pctl) { + dev_err(&pdev->dev, "could not register Nomadik pinctrl driver\n"); + return -EINVAL; + } + + /* We will handle a range of GPIO pins */ + for (i = 0; i < npct->soc->gpio_num_ranges; i++) + pinctrl_add_gpio_range(npct->pctl, &npct->soc->gpio_ranges[i]); + + platform_set_drvdata(pdev, npct); + dev_info(&pdev->dev, "initialized Nomadik pin control driver\n"); + + return 0; +} + static const struct of_device_id nmk_gpio_match[] = { { .compatible = "st,nomadik-gpio", }, {} @@ -1294,9 +1749,28 @@ static struct platform_driver nmk_gpio_driver = { .probe = nmk_gpio_probe, }; +static const struct platform_device_id nmk_pinctrl_id[] = { + { "pinctrl-stn8815", PINCTRL_NMK_STN8815 }, + { "pinctrl-db8500", PINCTRL_NMK_DB8500 }, +}; + +static struct platform_driver nmk_pinctrl_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "pinctrl-nomadik", + }, + .probe = nmk_pinctrl_probe, + .id_table = nmk_pinctrl_id, +}; + static int __init nmk_gpio_init(void) { - return platform_driver_register(&nmk_gpio_driver); + int ret; + + ret = platform_driver_register(&nmk_gpio_driver); + if (ret) + return ret; + return platform_driver_register(&nmk_pinctrl_driver); } core_initcall(nmk_gpio_init); diff --git a/drivers/pinctrl/pinctrl-nomadik.h b/drivers/pinctrl/pinctrl-nomadik.h new file mode 100644 index 0000000..bc91aed --- /dev/null +++ b/drivers/pinctrl/pinctrl-nomadik.h @@ -0,0 +1,77 @@ +#ifndef PINCTRL_PINCTRL_NOMADIK_H +#define PINCTRL_PINCTRL_NOMADIK_H + +#include <plat/gpio-nomadik.h> + +/* Package definitions */ +#define PINCTRL_NMK_STN8815 0 +#define PINCTRL_NMK_DB8500 1 + +/** + * struct nmk_function - Nomadik pinctrl mux function + * @name: The name of the function, exported to pinctrl core. + * @groups: An array of pin groups that may select this function. + * @ngroups: The number of entries in @groups. + */ +struct nmk_function { + const char *name; + const char * const *groups; + unsigned ngroups; +}; + +/** + * struct nmk_pingroup - describes a Nomadik pin group + * @name: the name of this specific pin group + * @pins: an array of discrete physical pins used in this group, taken + * from the driver-local pin enumeration space + * @num_pins: the number of pins in this group array, i.e. the number of + * elements in .pins so we can iterate over that array + * @altsetting: the altsetting to apply to all pins in this group to + * configure them to be used by a function + */ +struct nmk_pingroup { + const char *name; + const unsigned int *pins; + const unsigned npins; + int altsetting; +}; + +/** + * struct nmk_pinctrl_soc_data - Nomadik pin controller per-SoC configuration + * @gpio_ranges: An array of GPIO ranges for this SoC + * @gpio_num_ranges: The number of GPIO ranges for this SoC + * @pins: An array describing all pins the pin controller affects. + * All pins which are also GPIOs must be listed first within the + * array, and be numbered identically to the GPIO controller's + * numbering. + * @npins: The number of entries in @pins. + * @functions: The functions supported on this SoC. + * @nfunction: The number of entries in @functions. + * @groups: An array describing all pin groups the pin SoC supports. + * @ngroups: The number of entries in @groups. + */ +struct nmk_pinctrl_soc_data { + struct pinctrl_gpio_range *gpio_ranges; + unsigned gpio_num_ranges; + const struct pinctrl_pin_desc *pins; + unsigned npins; + const struct nmk_function *functions; + unsigned nfunctions; + const struct nmk_pingroup *groups; + unsigned ngroups; +}; + +#ifdef CONFIG_PINCTRL_DB8500 + +void nmk_pinctrl_db8500_init(const struct nmk_pinctrl_soc_data **soc); + +#else + +static inline void +nmk_pinctrl_db8500_init(const struct nmk_pinctrl_soc_data **soc) +{ +} + +#endif + +#endif /* PINCTRL_PINCTRL_NOMADIK_H */ diff --git a/include/linux/pinctrl/pinctrl-state.h b/include/linux/pinctrl/pinctrl-state.h index 3920e28..634608dc 100644 --- a/include/linux/pinctrl/pinctrl-state.h +++ b/include/linux/pinctrl/pinctrl-state.h @@ -2,5 +2,18 @@ * Standard pin control state definitions */ +/** + * @PINCTRL_STATE_DEFAULT: the state the pinctrl handle shall be put + * into as default, usually this means the pins are up and ready to + * be used by the device driver. This state is commonly used by + * hogs to configure muxing and pins at boot. + * @PINCTRL_STATE_IDLE: the state the pinctrl handle shall be put into + * when the pins are idle. Could typically be set from a + * pm_runtime_suspend() operation. + * @PINCTRL_STATE_SLEEP: the state the pinctrl handle shall be put into + * when the pins are sleeping. Could typically be set from a + * common suspend() function. + */ #define PINCTRL_STATE_DEFAULT "default" #define PINCTRL_STATE_IDLE "idle" +#define PINCTRL_STATE_SLEEP "sleep" |