diff options
| -rw-r--r-- | drivers/ata/pata_mpiix.c | 19 |
1 files changed, 10 insertions, 9 deletions
diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c index 976663d..4e97a7e 100644 --- a/drivers/ata/pata_mpiix.c +++ b/drivers/ata/pata_mpiix.c @@ -35,7 +35,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_mpiix" -#define DRV_VERSION "0.7.3" +#define DRV_VERSION "0.7.4" enum { IDETIM = 0x6C, /* IDE control register */ @@ -80,8 +80,8 @@ static void mpiix_error_handler(struct ata_port *ap) * @adev: ATA device * * Called to do the PIO mode setup. The MPIIX allows us to program the - * IORDY sample point (2-5 clocks), recovery 1-4 clocks and whether - * prefetching or iordy are used. + * IORDY sample point (2-5 clocks), recovery (1-4 clocks) and whether + * prefetching or IORDY are used. * * This would get very ugly because we can only program timing for one * device at a time, the other gets PIO0. Fortunately libata calls @@ -103,18 +103,19 @@ static void mpiix_set_piomode(struct ata_port *ap, struct ata_device *adev) { 2, 3 }, }; pci_read_config_word(pdev, IDETIM, &idetim); - /* Mask the IORDY/TIME/PPE0 bank for this device */ + + /* Mask the IORDY/TIME/PPE for this device */ if (adev->class == ATA_DEV_ATA) - control |= PPE; /* PPE enable for disk */ + control |= PPE; /* Enable prefetch/posting for disk */ if (ata_pio_need_iordy(adev)) - control |= IORDY; /* IORDY */ - if (pio > 0) + control |= IORDY; + if (pio > 1) control |= FTIM; /* This drive is on the fast timing bank */ /* Mask out timing and clear both TIME bank selects */ idetim &= 0xCCEE; - idetim &= ~(0x07 << (2 * adev->devno)); - idetim |= (control << (2 * adev->devno)); + idetim &= ~(0x07 << (4 * adev->devno)); + idetim |= control << (4 * adev->devno); idetim |= (timings[pio][0] << 12) | (timings[pio][1] << 8); pci_write_config_word(pdev, IDETIM, idetim); |