diff options
| -rw-r--r-- | drivers/scsi/mpt2sas/mpi/mpi2.h | 9 | ||||
| -rw-r--r-- | drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h | 20 | ||||
| -rw-r--r-- | drivers/scsi/mpt2sas/mpi/mpi2_history.txt | 3 | ||||
| -rw-r--r-- | drivers/scsi/mpt2sas/mpi/mpi2_init.h | 9 | ||||
| -rw-r--r-- | drivers/scsi/mpt2sas/mpi/mpi2_ioc.h | 8 | ||||
| -rw-r--r-- | drivers/scsi/mpt2sas/mpi/mpi2_raid.h | 6 | ||||
| -rw-r--r-- | drivers/scsi/mpt2sas/mpi/mpi2_sas.h | 9 | ||||
| -rw-r--r-- | drivers/scsi/mpt2sas/mpi/mpi2_tool.h | 49 |
8 files changed, 95 insertions, 18 deletions
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2.h b/drivers/scsi/mpt2sas/mpi/mpi2.h index 4b1c2f0..8be75e6 100644 --- a/drivers/scsi/mpt2sas/mpi/mpi2.h +++ b/drivers/scsi/mpt2sas/mpi/mpi2.h @@ -8,7 +8,7 @@ * scatter/gather formats. * Creation Date: June 21, 2006 * - * mpi2.h Version: 02.00.15 + * mpi2.h Version: 02.00.16 * * Version History * --------------- @@ -61,6 +61,8 @@ * Added define for MPI2_FUNCTION_PWR_MGMT_CONTROL. * Added defines for product-specific range of message * function codes, 0xF0 to 0xFF. + * 05-12-10 02.00.16 Bumped MPI2_HEADER_VERSION_UNIT. + * Added alternative defines for the SGE Direction bit. * -------------------------------------------------------------------------- */ @@ -86,7 +88,7 @@ #define MPI2_VERSION_02_00 (0x0200) /* versioning for this MPI header set */ -#define MPI2_HEADER_VERSION_UNIT (0x0F) +#define MPI2_HEADER_VERSION_UNIT (0x10) #define MPI2_HEADER_VERSION_DEV (0x00) #define MPI2_HEADER_VERSION_UNIT_MASK (0xFF00) #define MPI2_HEADER_VERSION_UNIT_SHIFT (8) @@ -929,6 +931,9 @@ typedef struct _MPI2_MPI_SGE_UNION #define MPI2_SGE_FLAGS_IOC_TO_HOST (0x00) #define MPI2_SGE_FLAGS_HOST_TO_IOC (0x04) +#define MPI2_SGE_FLAGS_DEST (MPI2_SGE_FLAGS_IOC_TO_HOST) +#define MPI2_SGE_FLAGS_SOURCE (MPI2_SGE_FLAGS_HOST_TO_IOC) + /* Address Size */ #define MPI2_SGE_FLAGS_32_BIT_ADDRESSING (0x00) diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h index e3728d7..d76a658 100644 --- a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h +++ b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h @@ -6,7 +6,7 @@ * Title: MPI Configuration messages and pages * Creation Date: November 10, 2006 * - * mpi2_cnfg.h Version: 02.00.14 + * mpi2_cnfg.h Version: 02.00.15 * * Version History * --------------- @@ -121,6 +121,10 @@ * Added MPI2_CONFIG_PAGE_SASIOUNIT_6 and related defines. * Added MPI2_CONFIG_PAGE_SASIOUNIT_7 and related defines. * Added MPI2_CONFIG_PAGE_SASIOUNIT_8 and related defines. + * 05-12-10 02.00.15 Added MPI2_RAIDVOL0_STATUS_FLAG_VOL_NOT_CONSISTENT + * define. + * Added MPI2_PHYSDISK0_INCOMPATIBLE_MEDIA_TYPE define. + * Added MPI2_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY define. * -------------------------------------------------------------------------- */ @@ -333,7 +337,7 @@ typedef struct _MPI2_CONFIG_REQUEST #define MPI2_CONFIG_ACTION_PAGE_READ_NVRAM (0x06) #define MPI2_CONFIG_ACTION_PAGE_GET_CHANGEABLE (0x07) -/* values for SGLFlags field are in the SGL section of mpi2.h */ +/* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */ /* Config Reply Message */ @@ -379,6 +383,8 @@ typedef struct _MPI2_CONFIG_REPLY #define MPI2_MFGPAGE_DEVID_SAS2116_1 (0x0064) #define MPI2_MFGPAGE_DEVID_SAS2116_2 (0x0065) +#define MPI2_MFGPAGE_DEVID_SSS6200 (0x007E) + #define MPI2_MFGPAGE_DEVID_SAS2208_1 (0x0080) #define MPI2_MFGPAGE_DEVID_SAS2208_2 (0x0081) #define MPI2_MFGPAGE_DEVID_SAS2208_3 (0x0082) @@ -390,6 +396,8 @@ typedef struct _MPI2_CONFIG_REPLY #define MPI2_MFGPAGE_DEVID_SAS2308_3 (0x006E) + + /* Manufacturing Page 0 */ typedef struct _MPI2_CONFIG_PAGE_MAN_0 @@ -729,6 +737,7 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_1 /* IO Unit Page 1 Flags defines */ #define MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY (0x00000800) #define MPI2_IOUNITPAGE1_MASK_SATA_WRITE_CACHE (0x00000600) +#define MPI2_IOUNITPAGE1_SATA_WRITE_CACHE_SHIFT (9) #define MPI2_IOUNITPAGE1_ENABLE_SATA_WRITE_CACHE (0x00000000) #define MPI2_IOUNITPAGE1_DISABLE_SATA_WRITE_CACHE (0x00000200) #define MPI2_IOUNITPAGE1_UNCHANGED_SATA_WRITE_CACHE (0x00000400) @@ -1347,6 +1356,7 @@ typedef struct _MPI2_CONFIG_PAGE_RAID_VOL_0 #define MPI2_RAIDVOL0_STATUS_FLAG_CAPACITY_EXPANSION (0x00040000) #define MPI2_RAIDVOL0_STATUS_FLAG_BACKGROUND_INIT (0x00020000) #define MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS (0x00010000) +#define MPI2_RAIDVOL0_STATUS_FLAG_VOL_NOT_CONSISTENT (0x00000080) #define MPI2_RAIDVOL0_STATUS_FLAG_OCE_ALLOWED (0x00000040) #define MPI2_RAIDVOL0_STATUS_FLAG_BGI_COMPLETE (0x00000020) #define MPI2_RAIDVOL0_STATUS_FLAG_1E_OFFSET_MIRROR (0x00000000) @@ -1469,11 +1479,15 @@ typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_0 #define MPI2_PHYSDISK0_INCOMPATIBLE_MAX_LBA (0x03) #define MPI2_PHYSDISK0_INCOMPATIBLE_SATA_EXTENDED_CMD (0x04) #define MPI2_PHYSDISK0_INCOMPATIBLE_REMOVEABLE_MEDIA (0x05) +#define MPI2_PHYSDISK0_INCOMPATIBLE_MEDIA_TYPE (0x06) #define MPI2_PHYSDISK0_INCOMPATIBLE_UNKNOWN (0xFF) /* PhysDiskAttributes defines */ +#define MPI2_PHYSDISK0_ATTRIB_MEDIA_MASK (0x0C) #define MPI2_PHYSDISK0_ATTRIB_SOLID_STATE_DRIVE (0x08) #define MPI2_PHYSDISK0_ATTRIB_HARD_DISK_DRIVE (0x04) + +#define MPI2_PHYSDISK0_ATTRIB_PROTOCOL_MASK (0x03) #define MPI2_PHYSDISK0_ATTRIB_SAS_PROTOCOL (0x02) #define MPI2_PHYSDISK0_ATTRIB_SATA_PROTOCOL (0x01) @@ -1545,6 +1559,7 @@ typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1 #define MPI2_SAS_NEG_LINK_RATE_SATA_OOB_COMPLETE (0x03) #define MPI2_SAS_NEG_LINK_RATE_PORT_SELECTOR (0x04) #define MPI2_SAS_NEG_LINK_RATE_SMP_RESET_IN_PROGRESS (0x05) +#define MPI2_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY (0x06) #define MPI2_SAS_NEG_LINK_RATE_1_5 (0x08) #define MPI2_SAS_NEG_LINK_RATE_3_0 (0x09) #define MPI2_SAS_NEG_LINK_RATE_6_0 (0x0A) @@ -1571,6 +1586,7 @@ typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1 #define MPI2_SAS_PHYINFO_PHY_VACANT (0x80000000) #define MPI2_SAS_PHYINFO_PHY_POWER_CONDITION_MASK (0x18000000) +#define MPI2_SAS_PHYINFO_SHIFT_PHY_POWER_CONDITION (27) #define MPI2_SAS_PHYINFO_PHY_POWER_ACTIVE (0x00000000) #define MPI2_SAS_PHYINFO_PHY_POWER_PARTIAL (0x08000000) #define MPI2_SAS_PHYINFO_PHY_POWER_SLUMBER (0x10000000) diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_history.txt b/drivers/scsi/mpt2sas/mpi/mpi2_history.txt index bd6c92b..b1e88f2 100644 --- a/drivers/scsi/mpt2sas/mpi/mpi2_history.txt +++ b/drivers/scsi/mpt2sas/mpi/mpi2_history.txt @@ -291,6 +291,7 @@ mpi2_raid.h * can be sized by the build environment. * 07-30-09 02.00.04 Added proper define for the Use Default Settings bit of * VolumeCreationFlags and marked the old one as obsolete. + * 05-12-10 02.00.05 Added MPI2_RAID_VOL_FLAGS_OP_MDC define. * -------------------------------------------------------------------------- mpi2_sas.h @@ -301,6 +302,7 @@ mpi2_sas.h * Request. * 10-28-09 02.00.03 Changed the type of SGL in MPI2_SATA_PASSTHROUGH_REQUEST * to MPI2_SGE_IO_UNION since it supports chained SGLs. + * 05-12-10 02.00.04 Modified some comments. * -------------------------------------------------------------------------- mpi2_targ.h @@ -324,6 +326,7 @@ mpi2_tool.h * and reply messages. * Added MPI2_DIAG_BUF_TYPE_EXTENDED. * Incremented MPI2_DIAG_BUF_TYPE_COUNT. + * 05-12-10 02.00.05 Added Diagnostic Data Upload tool. * -------------------------------------------------------------------------- mpi2_type.h diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_init.h b/drivers/scsi/mpt2sas/mpi/mpi2_init.h index c4c99df..20e6b88 100644 --- a/drivers/scsi/mpt2sas/mpi/mpi2_init.h +++ b/drivers/scsi/mpt2sas/mpi/mpi2_init.h @@ -6,7 +6,7 @@ * Title: MPI SCSI initiator mode messages and structures * Creation Date: June 23, 2006 * - * mpi2_init.h Version: 02.00.09 + * mpi2_init.h Version: 02.00.10 * * Version History * --------------- @@ -32,6 +32,7 @@ * Added ResponseInfo field to MPI2_SCSI_TASK_MANAGE_REPLY. * Added MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG define. * 02-10-10 02.00.09 Removed unused structure that had "#if 0" around it. + * 05-12-10 02.00.10 Added optional vendor-unique region to SCSI IO Request. * -------------------------------------------------------------------------- */ @@ -98,7 +99,13 @@ typedef struct _MPI2_SCSI_IO_REQUEST U8 LUN[8]; /* 0x34 */ U32 Control; /* 0x3C */ MPI2_SCSI_IO_CDB_UNION CDB; /* 0x40 */ + +#ifdef MPI2_SCSI_IO_VENDOR_UNIQUE_REGION /* typically this is left undefined */ + MPI2_SCSI_IO_VENDOR_UNIQUE VendorRegion; +#endif + MPI2_SGE_IO_UNION SGL; /* 0x60 */ + } MPI2_SCSI_IO_REQUEST, MPI2_POINTER PTR_MPI2_SCSI_IO_REQUEST, Mpi2SCSIIORequest_t, MPI2_POINTER pMpi2SCSIIORequest_t; diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h b/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h index 495bedc..761cbdb 100644 --- a/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h +++ b/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h @@ -6,7 +6,7 @@ * Title: MPI IOC, Port, Event, FW Download, and FW Upload messages * Creation Date: October 11, 2006 * - * mpi2_ioc.h Version: 02.00.14 + * mpi2_ioc.h Version: 02.00.15 * * Version History * --------------- @@ -101,6 +101,8 @@ * 02-10-10 02.00.14 Added SAS Quiesce Event structure and defines. * Added PowerManagementControl Request structures and * defines. + * 05-12-10 02.00.15 Marked Task Set Full Event as obsolete. + * Added MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY define. * -------------------------------------------------------------------------- */ @@ -456,7 +458,7 @@ typedef struct _MPI2_EVENT_NOTIFICATION_REPLY #define MPI2_EVENT_STATE_CHANGE (0x0002) #define MPI2_EVENT_HARD_RESET_RECEIVED (0x0005) #define MPI2_EVENT_EVENT_CHANGE (0x000A) -#define MPI2_EVENT_TASK_SET_FULL (0x000E) +#define MPI2_EVENT_TASK_SET_FULL (0x000E) /* obsolete */ #define MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE (0x000F) #define MPI2_EVENT_IR_OPERATION_STATUS (0x0014) #define MPI2_EVENT_SAS_DISCOVERY (0x0016) @@ -517,6 +519,7 @@ typedef struct _MPI2_EVENT_DATA_HARD_RESET_RECEIVED MPI2_POINTER pMpi2EventDataHardResetReceived_t; /* Task Set Full Event data */ +/* this event is obsolete */ typedef struct _MPI2_EVENT_DATA_TASK_SET_FULL { @@ -831,6 +834,7 @@ typedef struct _MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST #define MPI2_EVENT_SAS_TOPO_LR_SATA_OOB_COMPLETE (0x03) #define MPI2_EVENT_SAS_TOPO_LR_PORT_SELECTOR (0x04) #define MPI2_EVENT_SAS_TOPO_LR_SMP_RESET_IN_PROGRESS (0x05) +#define MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY (0x06) #define MPI2_EVENT_SAS_TOPO_LR_RATE_1_5 (0x08) #define MPI2_EVENT_SAS_TOPO_LR_RATE_3_0 (0x09) #define MPI2_EVENT_SAS_TOPO_LR_RATE_6_0 (0x0A) diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_raid.h b/drivers/scsi/mpt2sas/mpi/mpi2_raid.h index 5160c33..bd61a7b 100644 --- a/drivers/scsi/mpt2sas/mpi/mpi2_raid.h +++ b/drivers/scsi/mpt2sas/mpi/mpi2_raid.h @@ -1,12 +1,12 @@ /* - * Copyright (c) 2000-2008 LSI Corporation. + * Copyright (c) 2000-2010 LSI Corporation. * * * Name: mpi2_raid.h * Title: MPI Integrated RAID messages and structures * Creation Date: April 26, 2007 * - * mpi2_raid.h Version: 02.00.04 + * mpi2_raid.h Version: 02.00.05 * * Version History * --------------- @@ -22,6 +22,7 @@ * can be sized by the build environment. * 07-30-09 02.00.04 Added proper define for the Use Default Settings bit of * VolumeCreationFlags and marked the old one as obsolete. + * 05-12-10 02.00.05 Added MPI2_RAID_VOL_FLAGS_OP_MDC define. * -------------------------------------------------------------------------- */ @@ -260,6 +261,7 @@ typedef struct _MPI2_RAID_VOL_INDICATOR #define MPI2_RAID_VOL_FLAGS_OP_ONLINE_CAP_EXPANSION (0x00000001) #define MPI2_RAID_VOL_FLAGS_OP_CONSISTENCY_CHECK (0x00000002) #define MPI2_RAID_VOL_FLAGS_OP_RESYNC (0x00000003) +#define MPI2_RAID_VOL_FLAGS_OP_MDC (0x00000004) /* RAID Action Reply ActionData union */ diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_sas.h b/drivers/scsi/mpt2sas/mpi/mpi2_sas.h index 2d8aeed..608f6d6 100644 --- a/drivers/scsi/mpt2sas/mpi/mpi2_sas.h +++ b/drivers/scsi/mpt2sas/mpi/mpi2_sas.h @@ -1,12 +1,12 @@ /* - * Copyright (c) 2000-2007 LSI Corporation. + * Copyright (c) 2000-2010 LSI Corporation. * * * Name: mpi2_sas.h * Title: MPI Serial Attached SCSI structures and definitions * Creation Date: February 9, 2007 * - * mpi2.h Version: 02.00.03 + * mpi2_sas.h Version: 02.00.04 * * Version History * --------------- @@ -20,6 +20,7 @@ * Request. * 10-28-09 02.00.03 Changed the type of SGL in MPI2_SATA_PASSTHROUGH_REQUEST * to MPI2_SGE_IO_UNION since it supports chained SGLs. + * 05-12-10 02.00.04 Modified some comments. * -------------------------------------------------------------------------- */ @@ -110,7 +111,7 @@ typedef struct _MPI2_SMP_PASSTHROUGH_REQUEST /* values for PassthroughFlags field */ #define MPI2_SMP_PT_REQ_PT_FLAGS_IMMEDIATE (0x80) -/* values for SGLFlags field are in the SGL section of mpi2.h */ +/* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */ /* SMP Passthrough Reply Message */ @@ -174,7 +175,7 @@ typedef struct _MPI2_SATA_PASSTHROUGH_REQUEST #define MPI2_SATA_PT_REQ_PT_FLAGS_WRITE (0x0002) #define MPI2_SATA_PT_REQ_PT_FLAGS_READ (0x0001) -/* values for SGLFlags field are in the SGL section of mpi2.h */ +/* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */ /* SATA Passthrough Reply Message */ diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_tool.h b/drivers/scsi/mpt2sas/mpi/mpi2_tool.h index 686b09b..5c6e3a6 100644 --- a/drivers/scsi/mpt2sas/mpi/mpi2_tool.h +++ b/drivers/scsi/mpt2sas/mpi/mpi2_tool.h @@ -6,7 +6,7 @@ * Title: MPI diagnostic tool structures and definitions * Creation Date: March 26, 2007 * - * mpi2_tool.h Version: 02.00.04 + * mpi2_tool.h Version: 02.00.05 * * Version History * --------------- @@ -22,6 +22,7 @@ * and reply messages. * Added MPI2_DIAG_BUF_TYPE_EXTENDED. * Incremented MPI2_DIAG_BUF_TYPE_COUNT. + * 05-12-10 02.00.05 Added Diagnostic Data Upload tool. * -------------------------------------------------------------------------- */ @@ -37,6 +38,7 @@ /* defines for the Tools */ #define MPI2_TOOLBOX_CLEAN_TOOL (0x00) #define MPI2_TOOLBOX_MEMORY_MOVE_TOOL (0x01) +#define MPI2_TOOLBOX_DIAG_DATA_UPLOAD_TOOL (0x02) #define MPI2_TOOLBOX_ISTWI_READ_WRITE_TOOL (0x03) #define MPI2_TOOLBOX_BEACON_TOOL (0x05) #define MPI2_TOOLBOX_DIAGNOSTIC_CLI_TOOL (0x06) @@ -102,8 +104,7 @@ typedef struct _MPI2_TOOLBOX_CLEAN_REQUEST * Toolbox Memory Move request ****************************************************************************/ -typedef struct _MPI2_TOOLBOX_MEM_MOVE_REQUEST -{ +typedef struct _MPI2_TOOLBOX_MEM_MOVE_REQUEST { U8 Tool; /* 0x00 */ U8 Reserved1; /* 0x01 */ U8 ChainOffset; /* 0x02 */ @@ -120,6 +121,44 @@ typedef struct _MPI2_TOOLBOX_MEM_MOVE_REQUEST /**************************************************************************** +* Toolbox Diagnostic Data Upload request +****************************************************************************/ + +typedef struct _MPI2_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST { + U8 Tool; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U8 SGLFlags; /* 0x0C */ + U8 Reserved5; /* 0x0D */ + U16 Reserved6; /* 0x0E */ + U32 Flags; /* 0x10 */ + U32 DataLength; /* 0x14 */ + MPI2_SGE_SIMPLE_UNION SGL; /* 0x18 */ +} MPI2_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST, +MPI2_POINTER PTR_MPI2_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST, +Mpi2ToolboxDiagDataUploadRequest_t, +MPI2_POINTER pMpi2ToolboxDiagDataUploadRequest_t; + +/* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */ + + +typedef struct _MPI2_DIAG_DATA_UPLOAD_HEADER { + U32 DiagDataLength; /* 00h */ + U8 FormatCode; /* 04h */ + U8 Reserved1; /* 05h */ + U16 Reserved2; /* 06h */ +} MPI2_DIAG_DATA_UPLOAD_HEADER, MPI2_POINTER PTR_MPI2_DIAG_DATA_UPLOAD_HEADER, +Mpi2DiagDataUploadHeader_t, MPI2_POINTER pMpi2DiagDataUploadHeader_t; + + +/**************************************************************************** * Toolbox ISTWI Read Write Tool ****************************************************************************/ @@ -162,7 +201,7 @@ typedef struct _MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST { #define MPI2_TOOL_ISTWI_ACTION_RELEASE_BUS (0x11) #define MPI2_TOOL_ISTWI_ACTION_RESET (0x12) -/* values for SGLFlags field are in the SGL section of mpi2.h */ +/* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */ /* Toolbox ISTWI Read Write Tool reply message */ @@ -248,7 +287,7 @@ typedef struct _MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST { Mpi2ToolboxDiagnosticCliRequest_t, MPI2_POINTER pMpi2ToolboxDiagnosticCliRequest_t; -/* values for SGLFlags field are in the SGL section of mpi2.h */ +/* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */ /* Toolbox Diagnostic CLI Tool reply message */ |