summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/hwmon/ucd9200112
-rw-r--r--drivers/hwmon/Kconfig10
-rw-r--r--drivers/hwmon/Makefile1
-rw-r--r--drivers/hwmon/ucd9200.c210
4 files changed, 333 insertions, 0 deletions
diff --git a/Documentation/hwmon/ucd9200 b/Documentation/hwmon/ucd9200
new file mode 100644
index 0000000..3c58607
--- /dev/null
+++ b/Documentation/hwmon/ucd9200
@@ -0,0 +1,112 @@
+Kernel driver ucd9200
+=====================
+
+Supported chips:
+ * TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248
+ Prefixes: 'ucd9220', 'ucd9222', 'ucd9224', 'ucd9240', 'ucd9244', 'ucd9246',
+ 'ucd9248'
+ Addresses scanned: -
+ Datasheets:
+ http://focus.ti.com/lit/ds/symlink/ucd9220.pdf
+ http://focus.ti.com/lit/ds/symlink/ucd9222.pdf
+ http://focus.ti.com/lit/ds/symlink/ucd9224.pdf
+ http://focus.ti.com/lit/ds/symlink/ucd9240.pdf
+ http://focus.ti.com/lit/ds/symlink/ucd9244.pdf
+ http://focus.ti.com/lit/ds/symlink/ucd9246.pdf
+ http://focus.ti.com/lit/ds/symlink/ucd9248.pdf
+
+Author: Guenter Roeck <guenter.roeck@ericsson.com>
+
+
+Description
+-----------
+
+[From datasheets] UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and
+UCD9248 are multi-rail, multi-phase synchronous buck digital PWM controllers
+designed for non-isolated DC/DC power applications. The devices integrate
+dedicated circuitry for DC/DC loop management with flash memory and a serial
+interface to support configuration, monitoring and management.
+
+This driver is a client driver to the core PMBus driver. Please see
+Documentation/hwmon/pmbus for details on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices for
+details.
+
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data. Please see
+Documentation/hwmon/pmbus for details.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported. Limits are read-write; all other
+attributes are read-only.
+
+in1_label "vin".
+in1_input Measured voltage. From READ_VIN register.
+in1_min Minumum Voltage. From VIN_UV_WARN_LIMIT register.
+in1_max Maximum voltage. From VIN_OV_WARN_LIMIT register.
+in1_lcrit Critical minumum Voltage. VIN_UV_FAULT_LIMIT register.
+in1_crit Critical maximum voltage. From VIN_OV_FAULT_LIMIT register.
+in1_min_alarm Voltage low alarm. From VIN_UV_WARNING status.
+in1_max_alarm Voltage high alarm. From VIN_OV_WARNING status.
+in1_lcrit_alarm Voltage critical low alarm. From VIN_UV_FAULT status.
+in1_crit_alarm Voltage critical high alarm. From VIN_OV_FAULT status.
+
+in[2-5]_label "vout[1-4]".
+in[2-5]_input Measured voltage. From READ_VOUT register.
+in[2-5]_min Minumum Voltage. From VOUT_UV_WARN_LIMIT register.
+in[2-5]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register.
+in[2-5]_lcrit Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register.
+in[2-5]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register.
+in[2-5]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status.
+in[2-5]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status.
+in[2-5]_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT status.
+in[2-5]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT status.
+
+curr1_label "iin".
+curr1_input Measured current. From READ_IIN register.
+
+curr[2-5]_label "iout[1-4]".
+curr[2-5]_input Measured current. From READ_IOUT register.
+curr[2-5]_max Maximum current. From IOUT_OC_WARN_LIMIT register.
+curr[2-5]_lcrit Critical minumum output current. From IOUT_UC_FAULT_LIMIT
+ register.
+curr[2-5]_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT register.
+curr[2-5]_max_alarm Current high alarm. From IOUT_OC_WARNING status.
+curr[2-5]_crit_alarm Current critical high alarm. From IOUT_OC_FAULT status.
+
+power1_input Measured input power. From READ_PIN register.
+power1_label "pin"
+
+power[2-5]_input Measured output power. From READ_POUT register.
+power[2-5]_label "pout[1-4]"
+
+ The number of output voltage, current, and power
+ attribute sets is determined by the number of enabled
+ rails. See chip datasheets for details.
+
+temp[1-5]_input Measured temperatures. From READ_TEMPERATURE_1 and
+ READ_TEMPERATURE_2 registers.
+ temp1 is the chip internal temperature. temp[2-5] are
+ rail temperatures. temp[2-5] attributes are only
+ created for enabled rails. See chip datasheets for
+ details.
+temp[1-5]_max Maximum temperature. From OT_WARN_LIMIT register.
+temp[1-5]_crit Critical high temperature. From OT_FAULT_LIMIT register.
+temp[1-5]_max_alarm Temperature high alarm.
+temp[1-5]_crit_alarm Temperature critical high alarm.
+
+fan1_input Fan RPM. ucd9240 only.
+fan1_alarm Fan alarm. ucd9240 only.
+fan1_fault Fan fault. ucd9240 only.
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index dff080d..07c4a86 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -857,6 +857,16 @@ config SENSORS_MAX8688
This driver can also be built as a module. If so, the module will
be called max8688.
+config SENSORS_UCD9200
+ tristate "TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, UCD9248"
+ default n
+ help
+ If you say yes here you get hardware monitoring support for TI
+ UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248.
+
+ This driver can also be built as a module. If so, the module will
+ be called ucd9200.
+
endif # PMBUS
config SENSORS_SHT15
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 465f1c8..1afe029 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -123,6 +123,7 @@ obj-$(CONFIG_SENSORS_PMBUS) += pmbus.o
obj-$(CONFIG_SENSORS_MAX16064) += max16064.o
obj-$(CONFIG_SENSORS_MAX34440) += max34440.o
obj-$(CONFIG_SENSORS_MAX8688) += max8688.o
+obj-$(CONFIG_SENSORS_UCD9200) += ucd9200.o
ccflags-$(CONFIG_HWMON_DEBUG_CHIP) := -DDEBUG
diff --git a/drivers/hwmon/ucd9200.c b/drivers/hwmon/ucd9200.c
new file mode 100644
index 0000000..ffcc1cf
--- /dev/null
+++ b/drivers/hwmon/ucd9200.c
@@ -0,0 +1,210 @@
+/*
+ * Hardware monitoring driver for ucd9200 series Digital PWM System Controllers
+ *
+ * Copyright (C) 2011 Ericsson AB.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pmbus.h>
+#include "pmbus.h"
+
+#define UCD9200_PHASE_INFO 0xd2
+#define UCD9200_DEVICE_ID 0xfd
+
+enum chips { ucd9200, ucd9220, ucd9222, ucd9224, ucd9240, ucd9244, ucd9246,
+ ucd9248 };
+
+static const struct i2c_device_id ucd9200_id[] = {
+ {"ucd9200", ucd9200},
+ {"ucd9220", ucd9220},
+ {"ucd9222", ucd9222},
+ {"ucd9224", ucd9224},
+ {"ucd9240", ucd9240},
+ {"ucd9244", ucd9244},
+ {"ucd9246", ucd9246},
+ {"ucd9248", ucd9248},
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, ucd9200_id);
+
+static int ucd9200_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1];
+ struct pmbus_driver_info *info;
+ const struct i2c_device_id *mid;
+ int i, j, ret;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_BYTE_DATA |
+ I2C_FUNC_SMBUS_BLOCK_DATA))
+ return -ENODEV;
+
+ ret = i2c_smbus_read_block_data(client, UCD9200_DEVICE_ID,
+ block_buffer);
+ if (ret < 0) {
+ dev_err(&client->dev, "Failed to read device ID\n");
+ return ret;
+ }
+ block_buffer[ret] = '\0';
+ dev_info(&client->dev, "Device ID %s\n", block_buffer);
+
+ mid = NULL;
+ for (i = 0; i < ARRAY_SIZE(ucd9200_id); i++) {
+ mid = &ucd9200_id[i];
+ if (!strncasecmp(mid->name, block_buffer, strlen(mid->name)))
+ break;
+ }
+ if (!mid || !strlen(mid->name)) {
+ dev_err(&client->dev, "Unsupported device\n");
+ return -ENODEV;
+ }
+ if (id->driver_data != ucd9200 && id->driver_data != mid->driver_data)
+ dev_notice(&client->dev,
+ "Device mismatch: Configured %s, detected %s\n",
+ id->name, mid->name);
+
+ info = kzalloc(sizeof(struct pmbus_driver_info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ ret = i2c_smbus_read_block_data(client, UCD9200_PHASE_INFO,
+ block_buffer);
+ if (ret < 0) {
+ dev_err(&client->dev, "Failed to read phase information\n");
+ goto out;
+ }
+
+ /*
+ * Calculate number of configured pages (rails) from PHASE_INFO
+ * register.
+ * Rails have to be sequential, so we can abort after finding
+ * the first unconfigured rail.
+ */
+ info->pages = 0;
+ for (i = 0; i < ret; i++) {
+ if (!block_buffer[i])
+ break;
+ info->pages++;
+ }
+ if (!info->pages) {
+ dev_err(&client->dev, "No rails configured\n");
+ ret = -ENODEV;
+ goto out;
+ }
+ dev_info(&client->dev, "%d rails configured\n", info->pages);
+
+ /*
+ * Set PHASE registers on all pages to 0xff to ensure that phase
+ * specific commands will apply to all phases of a given page (rail).
+ * This only affects the READ_IOUT and READ_TEMPERATURE2 registers.
+ * READ_IOUT will return the sum of currents of all phases of a rail,
+ * and READ_TEMPERATURE2 will return the maximum temperature detected
+ * for the the phases of the rail.
+ */
+ for (i = 0; i < info->pages; i++) {
+ /*
+ * Setting PAGE & PHASE fails once in a while for no obvious
+ * reason, so we need to retry a couple of times.
+ */
+ for (j = 0; j < 3; j++) {
+ ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, i);
+ if (ret < 0)
+ continue;
+ ret = i2c_smbus_write_byte_data(client, PMBUS_PHASE,
+ 0xff);
+ if (ret < 0)
+ continue;
+ break;
+ }
+ if (ret < 0) {
+ dev_err(&client->dev,
+ "Failed to initialize PHASE registers\n");
+ goto out;
+ }
+ }
+ if (info->pages > 1)
+ i2c_smbus_write_byte_data(client, PMBUS_PAGE, 0);
+
+ info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT |
+ PMBUS_HAVE_IIN | PMBUS_HAVE_PIN |
+ PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+ PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
+ PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP |
+ PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP;
+
+ for (i = 1; i < info->pages; i++)
+ info->func[i] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+ PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
+ PMBUS_HAVE_POUT |
+ PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP;
+
+ /* ucd9240 supports a single fan */
+ if (mid->driver_data == ucd9240)
+ info->func[0] |= PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12;
+
+ ret = pmbus_do_probe(client, mid, info);
+ if (ret < 0)
+ goto out;
+ return 0;
+out:
+ kfree(info);
+ return ret;
+}
+
+static int ucd9200_remove(struct i2c_client *client)
+{
+ int ret;
+ const struct pmbus_driver_info *info;
+
+ info = pmbus_get_driver_info(client);
+ ret = pmbus_do_remove(client);
+ kfree(info);
+ return ret;
+}
+
+
+/* This is the driver that will be inserted */
+static struct i2c_driver ucd9200_driver = {
+ .driver = {
+ .name = "ucd9200",
+ },
+ .probe = ucd9200_probe,
+ .remove = ucd9200_remove,
+ .id_table = ucd9200_id,
+};
+
+static int __init ucd9200_init(void)
+{
+ return i2c_add_driver(&ucd9200_driver);
+}
+
+static void __exit ucd9200_exit(void)
+{
+ i2c_del_driver(&ucd9200_driver);
+}
+
+MODULE_AUTHOR("Guenter Roeck");
+MODULE_DESCRIPTION("PMBus driver for TI UCD922x, UCD924x");
+MODULE_LICENSE("GPL");
+module_init(ucd9200_init);
+module_exit(ucd9200_exit);