summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/feature-removal-schedule.txt54
-rw-r--r--arch/mips/Kconfig96
-rw-r--r--arch/mips/Makefile1
-rw-r--r--arch/mips/au1000/common/dbdma.c6
-rw-r--r--arch/mips/au1000/common/irq.c14
-rw-r--r--arch/mips/au1000/common/power.c22
-rw-r--r--arch/mips/au1000/csb250/init.c6
-rw-r--r--arch/mips/basler/excite/excite_setup.c2
-rw-r--r--arch/mips/ddb5xxx/common/prom.c2
-rw-r--r--arch/mips/gt64120/common/Makefile1
-rw-r--r--arch/mips/gt64120/common/pci.c147
-rw-r--r--arch/mips/gt64120/momenco_ocelot/setup.c4
-rw-r--r--arch/mips/gt64120/wrppmc/Makefile2
-rw-r--r--arch/mips/gt64120/wrppmc/int-handler.S59
-rw-r--r--arch/mips/gt64120/wrppmc/irq.c20
-rw-r--r--arch/mips/gt64120/wrppmc/setup.c2
-rw-r--r--arch/mips/gt64120/wrppmc/time.c4
-rw-r--r--arch/mips/kernel/apm.c2
-rw-r--r--arch/mips/kernel/cpu-probe.c2
-rw-r--r--arch/mips/kernel/entry.S6
-rw-r--r--arch/mips/kernel/gdb-low.S4
-rw-r--r--arch/mips/kernel/genex.S2
-rw-r--r--arch/mips/kernel/head.S2
-rw-r--r--arch/mips/kernel/r4k_switch.S6
-rw-r--r--arch/mips/kernel/scall32-o32.S1
-rw-r--r--arch/mips/kernel/scall64-64.S1
-rw-r--r--arch/mips/kernel/scall64-n32.S1
-rw-r--r--arch/mips/kernel/scall64-o32.S1
-rw-r--r--arch/mips/kernel/setup.c3
-rw-r--r--arch/mips/kernel/smtc-asm.S10
-rw-r--r--arch/mips/kernel/syscall.c8
-rw-r--r--arch/mips/kernel/traps.c15
-rw-r--r--arch/mips/mm/Makefile1
-rw-r--r--arch/mips/mm/c-r4k.c99
-rw-r--r--arch/mips/mm/sc-mips.c112
-rw-r--r--arch/mips/momentum/jaguar_atx/setup.c4
-rw-r--r--arch/mips/momentum/ocelot_c/setup.c4
-rw-r--r--arch/mips/momentum/ocelot_g/setup.c4
-rw-r--r--arch/mips/oprofile/op_model_mipsxx.c148
-rw-r--r--arch/mips/pci/Makefile2
-rw-r--r--arch/mips/pci/ops-tx4927.c8
-rw-r--r--arch/mips/pci/ops-tx4938.c8
-rw-r--r--arch/mips/sgi-ip27/Kconfig3
-rw-r--r--arch/mips/sgi-ip27/Makefile11
-rw-r--r--arch/mips/sgi-ip27/ip27-console.c40
-rw-r--r--arch/mips/sibyte/Kconfig3
-rw-r--r--include/asm-mips/asmmacro.h4
-rw-r--r--include/asm-mips/cpu-features.h20
-rw-r--r--include/asm-mips/fixmap.h4
-rw-r--r--include/asm-mips/hazards.h4
-rw-r--r--include/asm-mips/irq.h4
-rw-r--r--include/asm-mips/mach-au1x00/au1xxx_psc.h2
-rw-r--r--include/asm-mips/mipsregs.h3
-rw-r--r--include/asm-mips/sn/ioc3.h2
-rw-r--r--include/asm-mips/sn/klconfig.h10
-rw-r--r--include/asm-mips/stackframe.h16
-rw-r--r--include/asm-mips/unistd.h15
-rw-r--r--include/linux/elf-em.h5
58 files changed, 572 insertions, 470 deletions
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 033ac91..b1c6c70 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -132,16 +132,6 @@ Who: NeilBrown <neilb@suse.de>
---------------------------
-What: au1x00_uart driver
-When: January 2006
-Why: The 8250 serial driver now has the ability to deal with the differences
- between the standard 8250 family of UARTs and their slightly strange
- brother on Alchemy SOCs. The loss of features is not considered an
- issue.
-Who: Ralf Baechle <ralf@linux-mips.org>
-
----------------------------
-
What: eepro100 network driver
When: January 2007
Why: replaced by the e100 driver
@@ -234,3 +224,47 @@ Why: The interface no longer has any callers left in the kernel. It
Who: Nick Piggin <npiggin@suse.de>
---------------------------
+
+What: Support for the MIPS EV96100 evaluation board
+When: September 2006
+Why: Does no longer build since at least November 15, 2003, apparently
+ no userbase left.
+Who: Ralf Baechle <ralf@linux-mips.org>
+
+---------------------------
+
+What: Support for the Momentum / PMC-Sierra Jaguar ATX evaluation board
+When: September 2006
+Why: Does no longer build since quite some time, and was never popular,
+ due to the platform being replaced by successor models. Apparently
+ no user base left. It also is one of the last users of
+ WANT_PAGE_VIRTUAL.
+Who: Ralf Baechle <ralf@linux-mips.org>
+
+---------------------------
+
+What: Support for the Momentum Ocelot, Ocelot 3, Ocelot C and Ocelot G
+When: September 2006
+Why: Some do no longer build and apparently there is no user base left
+ for these platforms.
+Who: Ralf Baechle <ralf@linux-mips.org>
+
+---------------------------
+
+What: Support for MIPS Technologies' Altas and SEAD evaluation board
+When: September 2006
+Why: Some do no longer build and apparently there is no user base left
+ for these platforms. Hardware out of production since several years.
+Who: Ralf Baechle <ralf@linux-mips.org>
+
+---------------------------
+
+What: Support for the IT8172-based platforms, ITE 8172G and Globespan IVR
+When: September 2006
+Why: Code does no longer build since at least 2.6.0, apparently there is
+ no user base left for these platforms. Hardware out of production
+ since several years and hardly a trace of the manufacturer left on
+ the net.
+Who: Ralf Baechle <ralf@linux-mips.org>
+
+---------------------------
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 08c2ece..747a9c1 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -308,6 +308,7 @@ config MIPS_ATLAS
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_MULTITHREADING if EXPERIMENTAL
help
This enables support for the MIPS Technologies Atlas evaluation
board.
@@ -324,6 +325,7 @@ config MIPS_MALTA
select I8259
select MIPS_BOARDS_GEN
select MIPS_BONITO64
+ select MIPS_CPU_SCACHE
select MIPS_GT64120
select MIPS_MSC
select SWAP_IO_SPACE
@@ -336,6 +338,7 @@ config MIPS_MALTA
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_MULTITHREADING
help
This enables support for the MIPS Technologies Malta evaluation
board.
@@ -358,7 +361,7 @@ config MIPS_SEAD
board.
config WR_PPMC
- bool "Support for Wind River PPMC board"
+ bool "Wind River PPMC board"
select IRQ_CPU
select BOOT_ELF32
select DMA_NONCOHERENT
@@ -536,6 +539,7 @@ config PMC_YOSEMITE
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_HIGHMEM
+ select SYS_SUPPORTS_SMP
help
Yosemite is an evaluation board for the RM9000x2 processor
manufactured by PMC-Sierra.
@@ -590,6 +594,7 @@ config SGI_IP22
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_SMP
help
This are the SGI Indy, Challenge S and Indigo2, as well as certain
OEM variants like the Tandem CMN B006S. To compile a Linux kernel
@@ -601,6 +606,7 @@ config SGI_IP27
select ARC64
select BOOT_ELF64
select DMA_IP27
+ select EARLY_PRINTK
select HW_HAS_PCI
select PCI_DOMAINS
select SYS_HAS_CPU_R10000
@@ -1249,7 +1255,7 @@ config CPU_R6000
select CPU_SUPPORTS_32BIT_KERNEL
help
MIPS Technologies R6000 and R6000A series processors. Note these
- processors are extremly rare and the support for them is incomplete.
+ processors are extremely rare and the support for them is incomplete.
config CPU_NEVADA
bool "RM52xx"
@@ -1370,7 +1376,7 @@ config SYS_HAS_CPU_SB1
endmenu
#
-# These two indicate any levelof the MIPS32 and MIPS64 architecture
+# These two indicate any level of the MIPS32 and MIPS64 architecture
#
config CPU_MIPS32
bool
@@ -1381,7 +1387,7 @@ config CPU_MIPS64
default y if CPU_MIPS64_R1 || CPU_MIPS64_R2
#
-# These two indicate the revision of the architecture, either 32 bot 64 bit.
+# These two indicate the revision of the architecture, either Release 1 or Release 2
#
config CPU_MIPSR1
bool
@@ -1474,6 +1480,13 @@ config IP22_CPU_SCACHE
bool
select BOARD_SCACHE
+#
+# Support for a MIPS32 / MIPS64 style S-caches
+#
+config MIPS_CPU_SCACHE
+ bool
+ select BOARD_SCACHE
+
config R5000_CPU_SCACHE
bool
select BOARD_SCACHE
@@ -1493,32 +1506,57 @@ config SIBYTE_DMA_PAGEOPS
config CPU_HAS_PREFETCH
bool
-config MIPS_MT
- bool "Enable MIPS MT"
-
choice
prompt "MIPS MT options"
- depends on MIPS_MT
+
+config MIPS_MT_DISABLED
+ bool "Disable multithreading support."
+ help
+ Use this option if your workload can't take advantage of
+ MIPS hardware multithreading support. On systems that don't have
+ the option of an MT-enabled processor this option will be the only
+ option in this menu.
config MIPS_MT_SMTC
bool "SMTC: Use all TCs on all VPEs for SMP"
+ depends on CPU_MIPS32_R2
+ #depends on CPU_MIPS64_R2 # once there is hardware ...
+ depends on SYS_SUPPORTS_MULTITHREADING
select CPU_MIPSR2_IRQ_VI
select CPU_MIPSR2_SRS
+ select MIPS_MT
select SMP
+ help
+ This is a kernel model which is known a SMTC or lately has been
+ marketesed into SMVP.
config MIPS_MT_SMP
bool "Use 1 TC on each available VPE for SMP"
+ depends on SYS_SUPPORTS_MULTITHREADING
+ select CPU_MIPSR2_IRQ_VI
+ select CPU_MIPSR2_SRS
+ select MIPS_MT
select SMP
+ help
+ This is a kernel model which is also known a VSMP or lately
+ has been marketesed into SMVP.
config MIPS_VPE_LOADER
bool "VPE loader support."
- depends on MIPS_MT
+ depends on SYS_SUPPORTS_MULTITHREADING
+ select MIPS_MT
help
Includes a loader for loading an elf relocatable object
onto another VPE and running it.
endchoice
+config MIPS_MT
+ bool
+
+config SYS_SUPPORTS_MULTITHREADING
+ bool
+
config MIPS_MT_FPAFF
bool "Dynamic FPU affinity for FP-intensive threads"
depends on MIPS_MT
@@ -1575,32 +1613,23 @@ config CPU_HAS_LLSC
config CPU_HAS_WB
bool
+#
+# Vectored interrupt mode is an R2 feature
+#
config CPU_MIPSR2_IRQ_VI
- bool "Vectored interrupt mode"
- depends on CPU_MIPSR2
- help
- Vectored interrupt mode allowing faster dispatching of interrupts.
- The board support code needs to be written to take advantage of this
- mode. Compatibility code is included to allow the kernel to run on
- a CPU that does not support vectored interrupts. It's safe to
- say Y here.
+ bool
+#
+# Extended interrupt mode is an R2 feature
+#
config CPU_MIPSR2_IRQ_EI
- bool "External interrupt controller mode"
- depends on CPU_MIPSR2
- help
- Extended interrupt mode takes advantage of an external interrupt
- controller to allow fast dispatching from many possible interrupt
- sources. Say N unless you know that external interrupt support is
- required.
+ bool
+#
+# Shadow registers are an R2 feature
+#
config CPU_MIPSR2_SRS
- bool "Make shadow set registers available for interrupt handlers"
- depends on CPU_MIPSR2_IRQ_VI || CPU_MIPSR2_IRQ_EI
- help
- Allow the kernel to use shadow register sets for fast interrupts.
- Interrupt handlers must be specially written to use shadow sets.
- Say N unless you know that shadow register set upport is needed.
+ bool
config CPU_HAS_SYNC
bool
@@ -1681,8 +1710,8 @@ source "mm/Kconfig"
config SMP
bool "Multi-Processing support"
- depends on CPU_RM9000 || ((SIBYTE_BCM1x80 || SIBYTE_BCM1x55 || SIBYTE_SB1250 || QEMU) && !SIBYTE_STANDALONE) || SGI_IP27 || MIPS_MT_SMP || MIPS_MT_SMTC
- ---help---
+ depends on SYS_SUPPORTS_SMP
+ help
This enables support for systems with more than one CPU. If you have
a system with only one CPU, like most personal computers, say N. If
you have a system with more than one CPU, say Y.
@@ -1701,6 +1730,9 @@ config SMP
If you don't know what to do here, say N.
+config SYS_SUPPORTS_SMP
+ bool
+
config NR_CPUS
int "Maximum number of CPUs (2-64)"
range 2 64
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index d593014..ebbb9ad 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -374,6 +374,7 @@ core-$(CONFIG_PMC_YOSEMITE) += arch/mips/pmc-sierra/yosemite/
cflags-$(CONFIG_PMC_YOSEMITE) += -Iinclude/asm-mips/mach-yosemite
load-$(CONFIG_PMC_YOSEMITE) += 0xffffffff80100000
+#
# Qemu simulating MIPS32 4Kc
#
core-$(CONFIG_QEMU) += arch/mips/qemu/
diff --git a/arch/mips/au1000/common/dbdma.c b/arch/mips/au1000/common/dbdma.c
index 6ee090b..a547e47 100644
--- a/arch/mips/au1000/common/dbdma.c
+++ b/arch/mips/au1000/common/dbdma.c
@@ -290,7 +290,7 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
/* If kmalloc fails, it is caught below same
* as a channel not available.
*/
- ctp = kmalloc(sizeof(chan_tab_t), GFP_KERNEL);
+ ctp = kmalloc(sizeof(chan_tab_t), GFP_ATOMIC);
chan_tab_ptr[i] = ctp;
break;
}
@@ -730,6 +730,8 @@ au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes)
return rv;
}
+EXPORT_SYMBOL_GPL(au1xxx_dbdma_get_dest);
+
void
au1xxx_dbdma_stop(u32 chanid)
{
@@ -821,6 +823,8 @@ au1xxx_get_dma_residue(u32 chanid)
return rv;
}
+EXPORT_SYMBOL_GPL(au1xxx_get_dma_residue);
+
void
au1xxx_dbdma_chan_free(u32 chanid)
{
diff --git a/arch/mips/au1000/common/irq.c b/arch/mips/au1000/common/irq.c
index da74ac2..12d6ede 100644
--- a/arch/mips/au1000/common/irq.c
+++ b/arch/mips/au1000/common/irq.c
@@ -585,13 +585,13 @@ void intc1_req1_irqdispatch(struct pt_regs *regs)
* au_sleep function in power.c.....maybe I should just pm_register()
* them instead?
*/
-static uint sleep_intctl_config0[2];
-static uint sleep_intctl_config1[2];
-static uint sleep_intctl_config2[2];
-static uint sleep_intctl_src[2];
-static uint sleep_intctl_assign[2];
-static uint sleep_intctl_wake[2];
-static uint sleep_intctl_mask[2];
+static unsigned int sleep_intctl_config0[2];
+static unsigned int sleep_intctl_config1[2];
+static unsigned int sleep_intctl_config2[2];
+static unsigned int sleep_intctl_src[2];
+static unsigned int sleep_intctl_assign[2];
+static unsigned int sleep_intctl_wake[2];
+static unsigned int sleep_intctl_mask[2];
void
save_au1xxx_intctl(void)
diff --git a/arch/mips/au1000/common/power.c b/arch/mips/au1000/common/power.c
index f492631..b035513 100644
--- a/arch/mips/au1000/common/power.c
+++ b/arch/mips/au1000/common/power.c
@@ -80,17 +80,17 @@ static DEFINE_SPINLOCK(pm_lock);
* We only have to save/restore registers that aren't otherwise
* done as part of a driver pm_* function.
*/
-static uint sleep_aux_pll_cntrl;
-static uint sleep_cpu_pll_cntrl;
-static uint sleep_pin_function;
-static uint sleep_uart0_inten;
-static uint sleep_uart0_fifoctl;
-static uint sleep_uart0_linectl;
-static uint sleep_uart0_clkdiv;
-static uint sleep_uart0_enable;
-static uint sleep_usbhost_enable;
-static uint sleep_usbdev_enable;
-static uint sleep_static_memctlr[4][3];
+static unsigned int sleep_aux_pll_cntrl;
+static unsigned int sleep_cpu_pll_cntrl;
+static unsigned int sleep_pin_function;
+static unsigned int sleep_uart0_inten;
+static unsigned int sleep_uart0_fifoctl;
+static unsigned int sleep_uart0_linectl;
+static unsigned int sleep_uart0_clkdiv;
+static unsigned int sleep_uart0_enable;
+static unsigned int sleep_usbhost_enable;
+static unsigned int sleep_usbdev_enable;
+static unsigned int sleep_static_memctlr[4][3];
/* Define this to cause the value you write to /proc/sys/pm/sleep to
* set the TOY timer for the amount of time you want to sleep.
diff --git a/arch/mips/au1000/csb250/init.c b/arch/mips/au1000/csb250/init.c
index a4898b1..83f1b31 100644
--- a/arch/mips/au1000/csb250/init.c
+++ b/arch/mips/au1000/csb250/init.c
@@ -65,9 +65,9 @@ int __init prom_init(int argc, char **argv, char **envp, int *prom_vec)
/* We use a0 and a1 to pass initrd start and size.
*/
- if (((uint) argc > 0) && ((uint)argv > 0)) {
- my_initrd_start = (uint)argc;
- my_initrd_size = (uint)argv;
+ if (((unsigned int) argc > 0) && ((uint)argv > 0)) {
+ my_initrd_start = (unsigned int)argc;
+ my_initrd_size = (unsigned int)argv;
}
/* First argv is ignored.
diff --git a/arch/mips/basler/excite/excite_setup.c b/arch/mips/basler/excite/excite_setup.c
index 005b025..3d7670e 100644
--- a/arch/mips/basler/excite/excite_setup.c
+++ b/arch/mips/basler/excite/excite_setup.c
@@ -254,7 +254,7 @@ static int __init excite_platform_init(void)
return 0;
}
-void __init plat_setup(void)
+void __init plat_mem_setup(void)
{
volatile u32 * const boot_ocd_base = (u32 *) 0xbf7fc000;
diff --git a/arch/mips/ddb5xxx/common/prom.c b/arch/mips/ddb5xxx/common/prom.c
index 00c62c1..20c845c 100644
--- a/arch/mips/ddb5xxx/common/prom.c
+++ b/arch/mips/ddb5xxx/common/prom.c
@@ -21,8 +21,6 @@
const char *get_system_type(void)
{
switch (mips_machtype) {
- case MACH_NEC_DDB5074: return "NEC DDB Vrc-5074";
- case MACH_NEC_DDB5476: return "NEC DDB Vrc-5476";
case MACH_NEC_DDB5477: return "NEC DDB Vrc-5477";
case MACH_NEC_ROCKHOPPER: return "NEC Rockhopper";
case MACH_NEC_ROCKHOPPERII: return "NEC RockhopperII";
diff --git a/arch/mips/gt64120/common/Makefile b/arch/mips/gt64120/common/Makefile
index eba5051..1ef676e 100644
--- a/arch/mips/gt64120/common/Makefile
+++ b/arch/mips/gt64120/common/Makefile
@@ -3,4 +3,3 @@
#
obj-y += time.o
-obj-$(CONFIG_PCI) += pci.o
diff --git a/arch/mips/gt64120/common/pci.c b/arch/mips/gt64120/common/pci.c
deleted file mode 100644
index e9e5419..0000000
--- a/arch/mips/gt64120/common/pci.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- * Galileo Evaluation Boards PCI support.
- *
- * The general-purpose functions to read/write and configure the GT64120A's
- * PCI registers (function names start with pci0 or pci1) are either direct
- * copies of functions written by Galileo Technology, or are modifications
- * of their functions to work with Linux 2.4 vs Linux 2.2. These functions
- * are Copyright - Galileo Technology.
- *
- * Other functions are derived from other MIPS PCI implementations, or were
- * written by RidgeRun, Inc, Copyright (C) 2000 RidgeRun, Inc.
- * glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <asm/gt64120.h>
-
-#define SELF 0
-
-/*
- * pciXReadConfigReg - Read from a PCI configuration register
- * - Make sure the GT is configured as a master before
- * reading from another device on the PCI.
- * - The function takes care of Big/Little endian conversion.
- * INPUTS: regOffset: The register offset as it apears in the GT spec (or PCI
- * spec)
- * pciDevNum: The device number needs to be addressed.
- * RETURNS: data , if the data == 0xffffffff check the master abort bit in the
- * cause register to make sure the data is valid
- *
- * Configuration Address 0xCF8:
- *
- * 31 30 24 23 16 15 11 10 8 7 2 0 <=bit Number
- * |congif|Reserved| Bus |Device|Function|Register|00|
- * |Enable| |Number|Number| Number | Number | | <=field Name
- *
- */
-static unsigned int pci0ReadConfigReg(int offset, struct pci_dev *device)
-{
- unsigned int DataForRegCf8;
- unsigned int data;
-
- DataForRegCf8 = ((PCI_SLOT(device->devfn) << 11) |
- (PCI_FUNC(device->devfn) << 8) |
- (offset & ~0x3)) | 0x80000000;
- GT_WRITE(GT_PCI0_CFGADDR_OFS, DataForRegCf8);
-
- /*
- * The casual observer might wonder why the READ is duplicated here,
- * rather than immediately following the WRITE, and just have the swap
- * in the "if". That's because there is a latency problem with trying
- * to read immediately after setting up the address register. The "if"
- * check gives enough time for the address to stabilize, so the READ
- * can work.
- */
- if (PCI_SLOT(device->devfn) == SELF) /* This board */
- return GT_READ(GT_PCI0_CFGDATA_OFS);
- else /* PCI is little endian so swap the Data. */
- return __GT_READ(GT_PCI0_CFGDATA_OFS);
-}
-
-/*
- * pciXWriteConfigReg - Write to a PCI configuration register
- * - Make sure the GT is configured as a master before
- * writingto another device on the PCI.
- * - The function takes care of Big/Little endian conversion.
- * Inputs: unsigned int regOffset: The register offset as it apears in the
- * GT spec
- * (or any other PCI device spec)
- * pciDevNum: The device number needs to be addressed.
- *
- * Configuration Address 0xCF8:
- *
- * 31 30 24 23 16 15 11 10 8 7 2 0 <=bit Number
- * |congif|Reserved| Bus |Device|Function|Register|00|
- * |Enable| |Number|Number| Number | Number | | <=field Name
- *
- */
-static void pci0WriteConfigReg(unsigned int offset,
- struct pci_dev *device, unsigned int data)
-{
- unsigned int DataForRegCf8;
-
- DataForRegCf8 = ((PCI_SLOT(device->devfn) << 11) |
- (PCI_FUNC(device->devfn) << 8) |
- (offset & ~0x3)) | 0x80000000;
- GT_WRITE(GT_PCI0_CFGADDR_OFS, DataForRegCf8);
-
- if (PCI_SLOT(device->devfn) == SELF) /* This board */
- GT_WRITE(GT_PCI0_CFGDATA_OFS, data);
- else /* configuration Transaction over the pci. */
- __GT_WRITE(GT_PCI0_CFGDATA_OFS, data);
-}
-
-extern struct pci_ops gt64120_pci_ops;
-
-void __init pcibios_init(void)
-{
- u32 tmp;
- struct pci_dev controller;
-
- controller.devfn = SELF;
-
- tmp = GT_READ(GT_PCI0_CMD_OFS); /* Huh??? -- Ralf */
- tmp = GT_READ(GT_PCI0_BARE_OFS);
-
- /*
- * You have to enable bus mastering to configure any other
- * card on the bus.
- */
- tmp = pci0ReadConfigReg(PCI_COMMAND, &controller);
- tmp |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_SERR;
- pci0WriteConfigReg(PCI_COMMAND, &controller, tmp);
-
- /*
- * Reset PCI I/O and PCI MEM values to ones supported by EVM.
- */
- ioport_resource.start = GT_PCI_IO_BASE;
- ioport_resource.end = GT_PCI_IO_BASE + GT_PCI_IO_SIZE - 1;
- iomem_resource.start = GT_PCI_MEM_BASE;
- iomem_resource.end = GT_PCI_MEM_BASE + GT_PCI_MEM_SIZE - 1;
-
- pci_scan_bus(0, &gt64120_pci_ops, NULL);
-}
diff --git a/arch/mips/gt64120/momenco_ocelot/setup.c b/arch/mips/gt64120/momenco_ocelot/setup.c
index 1193a22..9804642 100644
--- a/arch/mips/gt64120/momenco_ocelot/setup.c
+++ b/arch/mips/gt64120/momenco_ocelot/setup.c
@@ -164,8 +164,8 @@ void __init plat_mem_setup(void)
pm_power_off = momenco_ocelot_power_off;
/*
- * initrd_start = (ulong)ocelot_initrd_start;
- * initrd_end = (ulong)ocelot_initrd_start + (ulong)ocelot_initrd_size;
+ * initrd_start = (unsigned long)ocelot_initrd_start;
+ * initrd_end = (unsigned long)ocelot_initrd_start + (ulong)ocelot_initrd_size;
* initrd_below_start_ok = 1;
*/
diff --git a/arch/mips/gt64120/wrppmc/Makefile b/arch/mips/gt64120/wrppmc/Makefile
index 72606b9..7cf5220 100644
--- a/arch/mips/gt64120/wrppmc/Makefile
+++ b/arch/mips/gt64120/wrppmc/Makefile
@@ -9,6 +9,6 @@
# Makefile for the Wind River MIPS 4KC PPMC Eval Board
#
-obj-y += int-handler.o irq.o reset.o setup.o time.o pci.o
+obj-y += irq.o reset.o setup.o time.o pci.o
EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/gt64120/wrppmc/int-handler.S b/arch/mips/gt64120/wrppmc/int-handler.S
deleted file mode 100644
index edee7b3..0000000
--- a/arch/mips/gt64120/wrppmc/int-handler.S
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1995, 1996, 1997, 2003 by Ralf Baechle
- * Copyright (C) Wind River System Inc. Rongkai.Zhan <rongkai.zhan@windriver.com>
- */
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/addrspace.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-#include <asm/mach-wrppmc/mach-gt64120.h>
-
- .align 5
- .set noat
-NESTED(handle_IRQ, PT_SIZE, sp)
- SAVE_ALL
- CLI # Important: mark KERNEL mode !
- .set at
-
- mfc0 t0, CP0_CAUSE # get pending interrupts
- mfc0 t1, CP0_STATUS # get enabled interrupts
- and t0, t0, t1 # get allowed interrupts
- andi t0, t0, 0xFF00
- beqz t0, 1f
- move a1, sp # Prepare 'struct pt_regs *regs' pointer
-
- andi t1, t0, CAUSEF_IP7 # CPU Compare/Count internal timer
- bnez t1, handle_cputimer_irq
- andi t1, t0, CAUSEF_IP6 # UART 16550 port
- bnez t1, handle_uart_irq
- andi t1, t0, CAUSEF_IP3 # PCI INT_A
- bnez t1, handle_pci_intA_irq
-
- /* wrong alarm or masked ... */
-1: j spurious_interrupt
- nop
-END(handle_IRQ)
-
- .align 5
-handle_cputimer_irq:
- li a0, WRPPMC_MIPS_TIMER_IRQ
- jal do_IRQ
- j ret_from_irq
-
- .align 5
-handle_uart_irq:
- li a0, WRPPMC_UART16550_IRQ
- jal do_IRQ
- j ret_from_irq
-
- .align 5
-handle_pci_intA_irq:
- li a0, WRPPMC_PCI_INTA_IRQ
- jal do_IRQ
- j ret_from_irq
-
diff --git a/arch/mips/gt64120/wrppmc/irq.c b/arch/mips/gt64120/wrppmc/irq.c
index 8605687..8d75a43 100644
--- a/arch/mips/gt64120/wrppmc/irq.c
+++ b/arch/mips/gt64120/wrppmc/irq.c
@@ -30,7 +30,19 @@
#include <asm/irq_cpu.h>
#include <asm/gt64120.h>
-extern asmlinkage void handle_IRQ(void);
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+ unsigned int pending = read_c0_status() & read_c0_cause();
+
+ if (pending & STATUSF_IP7)
+ do_IRQ(WRPPMC_MIPS_TIMER_IRQ, regs); /* CPU Compare/Count internal timer */
+ else if (pending & STATUSF_IP6)
+ do_IRQ(WRPPMC_UART16550_IRQ, regs); /* UART 16550 port */
+ else if (pending & STATUSF_IP3)
+ do_IRQ(WRPPMC_PCI_INTA_IRQ, regs); /* PCI INT_A */
+ else
+ spurious_interrupt(regs);
+}
/**
* Initialize GT64120 Interrupt Controller
@@ -50,12 +62,6 @@ void gt64120_init_pic(void)
void __init arch_init_irq(void)
{
- /* enable all CPU interrupt bits. */
- set_c0_status(ST0_IM); /* IE bit is still 0 */
-
- /* Install MIPS Interrupt Trap Vector */
- set_except_vector(0, handle_IRQ);
-
/* IRQ 0 - 7 are for MIPS common irq_cpu controller */
mips_cpu_irq_init(0);
diff --git a/arch/mips/gt64120/wrppmc/setup.c b/arch/mips/gt64120/wrppmc/setup.c
index 20c591e..2db6375 100644
--- a/arch/mips/gt64120/wrppmc/setup.c
+++ b/arch/mips/gt64120/wrppmc/setup.c
@@ -125,7 +125,7 @@ static void wrppmc_setup_serial(void)
}
#endif
-void __init plat_setup(void)
+void __init plat_mem_setup(void)
{
extern void wrppmc_time_init(void);
extern void wrppmc_timer_setup(struct irqaction *);
diff --git a/arch/mips/gt64120/wrppmc/time.c b/arch/mips/gt64120/wrppmc/time.c
index 175d22a..6c24a82 100644
--- a/arch/mips/gt64120/wrppmc/time.c
+++ b/arch/mips/gt64120/wrppmc/time.c
@@ -31,10 +31,6 @@ void __init wrppmc_timer_setup(struct irqaction *irq)
{
/* Install ISR for timer interrupt */
setup_irq(WRPPMC_MIPS_TIMER_IRQ, irq);
-
- /* to generate the first timer interrupt */
- write_c0_compare(mips_hpt_frequency/HZ);
- write_c0_count(0);
}
/*
diff --git a/arch/mips/kernel/apm.c b/arch/mips/kernel/apm.c
index 15f46b4..7bdbcd8 100644
--- a/arch/mips/kernel/apm.c
+++ b/arch/mips/kernel/apm.c
@@ -260,7 +260,7 @@ static unsigned int apm_poll(struct file *fp, poll_table * wait)
* has acknowledge does the actual suspend happen.
*/
static int
-apm_ioctl(struct inode * inode, struct file *filp, u_int cmd, u_long arg)
+apm_ioctl(struct inode * inode, struct file *filp, unsigned int cmd, unsigned long arg)
{
struct apm_user *as = filp->private_data;
unsigned long flags;
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 8c2c359..e045aba 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -597,8 +597,6 @@ static inline void cpu_probe_mips(struct cpuinfo_mips *c)
break;
case PRID_IMP_25KF:
c->cputype = CPU_25KF;
- /* Probe for L2 cache */
- c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT;
break;
case PRID_IMP_34K:
c->cputype = CPU_34K;
diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S
index a9c6de1..4575651 100644
--- a/arch/mips/kernel/entry.S
+++ b/arch/mips/kernel/entry.S
@@ -87,7 +87,7 @@ FEXPORT(restore_all) # restore full frame
ori v1, v0, TCSTATUS_IXMT
mtc0 v1, CP0_TCSTATUS
andi v0, TCSTATUS_IXMT
- ehb
+ _ehb
mfc0 t0, CP0_TCCONTEXT
DMT 9 # dmt t1
jal mips_ihb
@@ -95,7 +95,7 @@ FEXPORT(restore_all) # restore full frame
andi t3, t0, 0xff00
or t2, t2, t3
mtc0 t2, CP0_STATUS
- ehb
+ _ehb
andi t1, t1, VPECONTROL_TE
beqz t1, 1f
EMT
@@ -105,7 +105,7 @@ FEXPORT(restore_all) # restore full frame
xori v1, v1, TCSTATUS_IXMT
or v1, v0, v1
mtc0 v1, CP0_TCSTATUS
- ehb
+ _ehb
xor t0, t0, t3
mtc0 t0, CP0_TCCONTEXT
#endif /* CONFIG_MIPS_MT_SMTC */
diff --git a/arch/mips/kernel/gdb-low.S b/arch/mips/kernel/gdb-low.S
index 5fd7a8a..8760131 100644
--- a/arch/mips/kernel/gdb-low.S
+++ b/arch/mips/kernel/gdb-low.S
@@ -291,7 +291,7 @@
ori t1, t2, TCSTATUS_IXMT
mtc0 t1, CP0_TCSTATUS
andi t2, t2, TCSTATUS_IXMT
- ehb
+ _ehb
DMT 9 # dmt t1
jal mips_ihb
nop
@@ -310,7 +310,7 @@
xori t1, t1, TCSTATUS_IXMT
or t1, t1, t2
mtc0 t1, CP0_TCSTATUS
- ehb
+ _ehb
#endif /* CONFIG_MIPS_MT_SMTC */
LONG_L v0, GDB_FR_STATUS(sp)
LONG_L v1, GDB_FR_EPC(sp)
diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S
index ff7af36..6888cde 100644
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@@ -214,7 +214,7 @@ NESTED(except_vec_vi_handler, 0, sp)
mtc0 t0, CP0_TCCONTEXT
xor t1, t1, t0
mtc0 t1, CP0_STATUS
- ehb
+ _ehb
#endif /* CONFIG_MIPS_MT_SMTC */
CLI
move a0, sp
diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S
index bdf6f6e..c018098 100644
--- a/arch/mips/kernel/head.S
+++ b/arch/mips/kernel/head.S
@@ -96,7 +96,7 @@
/* Clear TKSU, leave IXMT */
xori t0, 0x00001800
mtc0 t0, CP0_TCSTATUS
- ehb
+ _ehb
/* We need to leave the global IE bit set, but clear EXL...*/
mfc0 t0, CP0_STATUS
or t0, ST0_CU0 | ST0_EXL | ST0_ERL | \set | \clr
diff --git a/arch/mips/kernel/r4k_switch.S b/arch/mips/kernel/r4k_switch.S
index db94e55..e1b85e6 100644
--- a/arch/mips/kernel/r4k_switch.S
+++ b/arch/mips/kernel/r4k_switch.S
@@ -94,7 +94,7 @@
ori t1, t2, TCSTATUS_IXMT
mtc0 t1, CP0_TCSTATUS
andi t2, t2, TCSTATUS_IXMT
- ehb
+ _ehb
DMT 8 # dmt t0
move t1,ra
jal mips_ihb
@@ -109,7 +109,7 @@
or a2, t1
mtc0 a2, CP0_STATUS
#ifdef CONFIG_MIPS_MT_SMTC
- ehb
+ _ehb
andi t0, t0, VPECONTROL_TE
beqz t0, 1f
emt
@@ -118,7 +118,7 @@
xori t1, t1, TCSTATUS_IXMT
or t1, t1, t2
mtc0 t1, CP0_TCSTATUS
- ehb
+ _ehb
#endif /* CONFIG_MIPS_MT_SMTC */
move v0, a0
jr ra
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index 2d2fdf7..6344be4 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -647,6 +647,7 @@ einval: li v0, -EINVAL
sys sys_unshare 1
sys sys_splice 4
sys sys_sync_file_range 7 /* 4305 */
+ sys sys_tee 4
.endm
/* We pre-compute the number of _instruction_ bytes needed to
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index 9ba7508..12d96c7 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -462,3 +462,4 @@ sys_call_table:
PTR sys_unshare
PTR sys_splice
PTR sys_sync_file_range
+ PTR sys_tee /* 5265 */
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index 942aca2..6856985 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -388,3 +388,4 @@ EXPORT(sysn32_call_table)
PTR sys_unshare
PTR sys_splice
PTR sys_sync_file_range
+ PTR sys_tee
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 8efb23a..0e63293 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -510,4 +510,5 @@ sys_call_table:
PTR sys_unshare
PTR sys_splice
PTR sys32_sync_file_range /* 4305 */
+ PTR sys_tee
.size sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index bfcec8d..d3e0871 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -488,6 +488,9 @@ static inline void resource_init(void)
{
int i;
+ if (UNCAC_BASE != IO_BASE)
+ return;
+
code_resource.start = virt_to_phys(&_text);
code_resource.end = virt_to_phys(&_etext) - 1;
data_resource.start = virt_to_phys(&_etext);
diff --git a/arch/mips/kernel/smtc-asm.S b/arch/mips/kernel/smtc-asm.S
index c9d6519..72c6d98 100644
--- a/arch/mips/kernel/smtc-asm.S
+++ b/arch/mips/kernel/smtc-asm.S
@@ -52,12 +52,12 @@ FEXPORT(__smtc_ipi_vector)
.set noat
/* Disable thread scheduling to make Status update atomic */
DMT 27 # dmt k1
- ehb
+ _ehb
/* Set EXL */
mfc0 k0,CP0_STATUS
ori k0,k0,ST0_EXL
mtc0 k0,CP0_STATUS
- ehb
+ _ehb
/* Thread scheduling now inhibited by EXL. Restore TE state. */
andi k1,k1,VPECONTROL_TE
beqz k1,1f
@@ -82,7 +82,7 @@ FEXPORT(__smtc_ipi_vector)
li k1,ST0_CU0
or k1,k1,k0
mtc0 k1,CP0_STATUS
- ehb
+ _ehb
get_saved_sp
/* Interrupting TC will have pre-set values in slots in the new frame */
2: subu k1,k1,PT_SIZE
@@ -90,7 +90,7 @@ FEXPORT(__smtc_ipi_vector)
lw k0,PT_TCSTATUS(k1)
/* Write it to TCStatus to restore CU/KSU/IXMT state */
mtc0 k0,$2,1
- ehb
+ _ehb
lw k0,PT_EPC(k1)
mtc0 k0,CP0_EPC
/* Save all will redundantly recompute the SP, but use it for now */
@@ -116,7 +116,7 @@ LEAF(self_ipi)
mfc0 t0,CP0_TCSTATUS
ori t1,t0,TCSTATUS_IXMT
mtc0 t1,CP0_TCSTATUS
- ehb
+ _ehb
/* We know we're in kernel mode, so prepare stack frame */
subu t1,sp,PT_SIZE
sw ra,PT_EPC(t1)
diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c
index 5e8a18a..6da8c68 100644
--- a/arch/mips/kernel/syscall.c
+++ b/arch/mips/kernel/syscall.c
@@ -301,7 +301,7 @@ asmlinkage int _sys_sysmips(int cmd, long arg1, int arg2, int arg3)
*
* This is really horribly ugly.
*/
-asmlinkage int sys_ipc (uint call, int first, int second,
+asmlinkage int sys_ipc (unsigned int call, int first, int second,
unsigned long third, void __user *ptr, long fifth)
{
int version, ret;
@@ -359,18 +359,18 @@ asmlinkage int sys_ipc (uint call, int first, int second,
case SHMAT:
switch (version) {
default: {
- ulong raddr;
+ unsigned long raddr;
ret = do_shmat (first, (char __user *) ptr, second,
&raddr);
if (ret)
return ret;
- return put_user (raddr, (ulong __user *) third);
+ return put_user (raddr, (unsigned long __user *) third);
}
case 1: /* iBCS2 emulator entry point */
if (!segment_eq(get_fs(), get_ds()))
return -EINVAL;
return do_shmat (first, (char __user *) ptr, second,
- (ulong *) third);
+ (unsigned long *) third);
}
case SHMDT:
return sys_shmdt ((char __user *)ptr);
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index ad16ece..6797193 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -1050,7 +1050,7 @@ void *set_except_vector(int n, void *addr)
return (void *)old_handler;
}
-#ifdef CONFIG_CPU_MIPSR2
+#ifdef CONFIG_CPU_MIPSR2_SRS
/*
* MIPSR2 shadow register set allocation
* FIXME: SMP...
@@ -1069,11 +1069,9 @@ static struct shadow_registers {
static void mips_srs_init(void)
{
-#ifdef CONFIG_CPU_MIPSR2_SRS
shadow_registers.sr_supported = ((read_c0_srsctl() >> 26) & 0x0f) + 1;
printk(KERN_INFO "%d MIPSR2 register sets available\n",
shadow_registers.sr_supported);
-#endif
shadow_registers.sr_allocated = 1; /* Set 0 used by kernel */
}
@@ -1198,7 +1196,14 @@ void *set_vi_handler(int n, void *addr)
{
return set_vi_srs_handler(n, addr, 0);
}
-#endif
+
+#else
+
+static inline void mips_srs_init(void)
+{
+}
+
+#endif /* CONFIG_CPU_MIPSR2_SRS */
/*
* This is used by native signal handling
@@ -1388,9 +1393,7 @@ void __init trap_init(void)
else
ebase = CAC_BASE;
-#ifdef CONFIG_CPU_MIPSR2
mips_srs_init();
-#endif
per_cpu_trap_init();
diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile
index 4a622011..19e41fd 100644
--- a/arch/mips/mm/Makefile
+++ b/arch/mips/mm/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_CPU_VR41XX) += c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
obj-$(CONFIG_IP22_CPU_SCACHE) += sc-ip22.o
obj-$(CONFIG_R5000_CPU_SCACHE) += sc-r5k.o
obj-$(CONFIG_RM7000_CPU_SCACHE) += sc-rm7k.o
+obj-$(CONFIG_MIPS_CPU_SCACHE) += sc-mips.o
#
# Choose one DMA coherency model
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 4a43924..75d887e 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -60,13 +60,13 @@ static unsigned long scache_size __read_mostly;
/*
* Dummy cache handling routines for machines without boardcaches
*/
-static void no_sc_noop(void) {}
+static void cache_noop(void) {}
static struct bcache_ops no_sc_ops = {
- .bc_enable = (void *)no_sc_noop,
- .bc_disable = (void *)no_sc_noop,
- .bc_wback_inv = (void *)no_sc_noop,
- .bc_inv = (void *)no_sc_noop
+ .bc_enable = (void *)cache_noop,
+ .bc_disable = (void *)cache_noop,
+ .bc_wback_inv = (void *)cache_noop,
+ .bc_inv = (void *)cache_noop
};
struct bcache_ops *bcops = &no_sc_ops;
@@ -94,7 +94,9 @@ static inline void r4k_blast_dcache_page_setup(void)
{
unsigned long dc_lsize = cpu_dcache_line_size();
- if (dc_lsize == 16)
+ if (dc_lsize == 0)
+ r4k_blast_dcache_page = (void *)cache_noop;
+ else if (dc_lsize == 16)
r4k_blast_dcache_page = blast_dcache16_page;
else if (dc_lsize == 32)
r4k_blast_dcache_page = r4k_blast_dcache_page_dc32;
@@ -106,7 +108,9 @@ static inline void r4k_blast_dcache_page_indexed_setup(void)
{
unsigned long dc_lsize = cpu_dcache_line_size();
- if (dc_lsize == 16)
+ if (dc_lsize == 0)
+ r4k_blast_dcache_page_indexed = (void *)cache_noop;
+ else if (dc_lsize == 16)
r4k_blast_dcache_page_indexed = blast_dcache16_page_indexed;
else if (dc_lsize == 32)
r4k_blast_dcache_page_indexed = blast_dcache32_page_indexed;
@@ -118,7 +122,9 @@ static inline void r4k_blast_dcache_setup(void)
{
unsigned long dc_lsize = cpu_dcache_line_size();
- if (dc_lsize == 16)
+ if (dc_lsize == 0)
+ r4k_blast_dcache = (void *)cache_noop;
+ else if (dc_lsize == 16)
r4k_blast_dcache = blast_dcache16;
else if (dc_lsize == 32)
r4k_blast_dcache = blast_dcache32;
@@ -201,7 +207,9 @@ static inline void r4k_blast_icache_page_setup(void)
{
unsigned long ic_lsize = cpu_icache_line_size();
- if (ic_lsize == 16)
+ if (ic_lsize == 0)
+ r4k_blast_icache_page = (void *)cache_noop;
+ else if (ic_lsize == 16)
r4k_blast_icache_page = blast_icache16_page;
else if (ic_lsize == 32)
r4k_blast_icache_page = blast_icache32_page;
@@ -216,7 +224,9 @@ static inline void r4k_blast_icache_page_indexed_setup(void)
{
unsigned long ic_lsize = cpu_icache_line_size();
- if (ic_lsize == 16)
+ if (ic_lsize == 0)
+ r4k_blast_icache_page_indexed = (void *)cache_noop;
+ else if (ic_lsize == 16)
r4k_blast_icache_page_indexed = blast_icache16_page_indexed;
else if (ic_lsize == 32) {
if (R4600_V1_INDEX_ICACHEOP_WAR && cpu_is_r4600_v1_x())
@@ -238,7 +248,9 @@ static inline void r4k_blast_icache_setup(void)
{
unsigned long ic_lsize = cpu_icache_line_size();
- if (ic_lsize == 16)
+ if (ic_lsize == 0)
+ r4k_blast_icache = (void *)cache_noop;
+ else if (ic_lsize == 16)
r4k_blast_icache = blast_icache16;
else if (ic_lsize == 32) {
if (R4600_V1_INDEX_ICACHEOP_WAR && cpu_is_r4600_v1_x())
@@ -258,7 +270,7 @@ static inline void r4k_blast_scache_page_setup(void)
unsigned long sc_lsize = cpu_scache_line_size();
if (scache_size == 0)
- r4k_blast_scache_page = (void *)no_sc_noop;
+ r4k_blast_scache_page = (void *)cache_noop;
else if (sc_lsize == 16)
r4k_blast_scache_page = blast_scache16_page;
else if (sc_lsize == 32)
@@ -276,7 +288,7 @@ static inline void r4k_blast_scache_page_indexed_setup(void)
unsigned long sc_lsize = cpu_scache_line_size();
if (scache_size == 0)
- r4k_blast_scache_page_indexed = (void *)no_sc_noop;
+ r4k_blast_scache_page_indexed = (void *)cache_noop;
else if (sc_lsize == 16)
r4k_blast_scache_page_indexed = blast_scache16_page_indexed;
else if (sc_lsize == 32)
@@ -294,7 +306,7 @@ static inline void r4k_blast_scache_setup(void)
unsigned long sc_lsize = cpu_scache_line_size();
if (scache_size == 0)
- r4k_blast_scache = (void *)no_sc_noop;
+ r4k_blast_scache = (void *)cache_noop;
else if (sc_lsize == 16)
r4k_blast_scache = blast_scache16;
else if (sc_lsize == 32)
@@ -508,7 +520,7 @@ static inline void local_r4k_flush_icache_range(void *args)
unsigned long end = fir_args->end;
if (!cpu_has_ic_fills_f_dc) {
- if (end - start > dcache_size) {
+ if (end - start >= dcache_size) {
r4k_blast_dcache();
} else {
R4600_HIT_CACHEOP_WAR_IMPL;
@@ -683,10 +695,12 @@ static void local_r4k_flush_cache_sigtramp(void * arg)
unsigned long addr = (unsigned long) arg;
R4600_HIT_CACHEOP_WAR_IMPL;
- protected_writeback_dcache_line(addr & ~(dc_lsize - 1));
+ if (dc_lsize)
+ protected_writeback_dcache_line(addr & ~(dc_lsize - 1));
if (!cpu_icache_snoops_remote_store && scache_size)
protected_writeback_scache_line(addr & ~(sc_lsize - 1));
- protected_flush_icache_line(addr & ~(ic_lsize - 1));
+ if (ic_lsize)
+ protected_flush_icache_line(addr & ~(ic_lsize - 1));
if (MIPS4K_ICACHE_REFILL_WAR) {
__asm__ __volatile__ (
".set push\n\t"
@@ -973,8 +987,10 @@ static void __init probe_pcache(void)
c->icache.waysize = icache_size / c->icache.ways;
c->dcache.waysize = dcache_size / c->dcache.ways;
- c->icache.sets = icache_size / (c->icache.linesz * c->icache.ways);
- c->dcache.sets = dcache_size / (c->dcache.linesz * c->dcache.ways);
+ c->icache.sets = c->icache.linesz ?
+ icache_size / (c->icache.linesz * c->icache.ways) : 0;
+ c->dcache.sets = c->dcache.linesz ?
+ dcache_size / (c->dcache.linesz * c->dcache.ways) : 0;
/*
* R10000 and R12000 P-caches are odd in a positive way. They're 32kB
@@ -993,10 +1009,16 @@ static void __init probe_pcache(void)
break;
case CPU_24K:
case CPU_34K:
- if (!(read_c0_config7() & (1 << 16)))
+ case CPU_74K:
+ if ((read_c0_config7() & (1 << 16))) {
+ /* effectively physically indexed dcache,
+ thus no virtual aliases. */
+ c->dcache.flags |= MIPS_CACHE_PINDEX;
+ break;
+ }
default:
- if (c->dcache.waysize > PAGE_SIZE)
- c->dcache.flags |= MIPS_CACHE_ALIASES;
+ if (c->dcache.waysize > PAGE_SIZE)
+ c->dcache.flags |= MIPS_CACHE_ALIASES;
}
switch (c->cputype) {
@@ -1092,6 +1114,7 @@ static int __init probe_scache(void)
extern int r5k_sc_init(void);
extern int rm7k_sc_init(void);
+extern int mips_sc_init(void);
static void __init setup_scache(void)
{
@@ -1139,17 +1162,29 @@ static void __init setup_scache(void)
return;
default:
+ if (c->isa_level == MIPS_CPU_ISA_M32R1 ||
+ c->isa_level == MIPS_CPU_ISA_M32R2 ||
+ c->isa_level == MIPS_CPU_ISA_M64R1 ||
+ c->isa_level == MIPS_CPU_ISA_M64R2) {
+#ifdef CONFIG_MIPS_CPU_SCACHE
+ if (mips_sc_init ()) {
+ scache_size = c->scache.ways * c->scache.sets * c->scache.linesz;
+ printk("MIPS secondary cache %ldkB, %s, linesize %d bytes.\n",
+ scache_size >> 10,
+ way_string[c->scache.ways], c->scache.linesz);
+ }
+#else
+ if (!(c->scache.flags & MIPS_CACHE_NOT_PRESENT))
+ panic("Dunno how to handle MIPS32 / MIPS64 second level cache");
+#endif
+ return;
+ }
sc_present = 0;
}
if (!sc_present)
return;
- if ((c->isa_level == MIPS_CPU_ISA_M32R1 ||
- c->isa_level == MIPS_CPU_ISA_M64R1) &&
- !(c->scache.flags & MIPS_CACHE_NOT_PRESENT))
- panic("Dunno how to handle MIPS32 / MIPS64 second level cache");
-
/* compute a couple of other cache variables */
c->scache.waysize = scache_size / c->scache.ways;
@@ -1246,10 +1281,12 @@ void __init r4k_cache_init(void)
* This code supports virtually indexed processors and will be
* unnecessarily inefficient on physically indexed processors.
*/
- shm_align_mask = max_t( unsigned long,
- c->dcache.sets * c->dcache.linesz - 1,
- PAGE_SIZE - 1);
-
+ if (c->dcache.linesz)
+ shm_align_mask = max_t( unsigned long,
+ c->dcache.sets * c->dcache.linesz - 1,
+ PAGE_SIZE - 1);
+ else
+ shm_align_mask = PAGE_SIZE-1;
flush_cache_all = r4k_flush_cache_all;
__flush_cache_all = r4k___flush_cache_all;
flush_cache_mm = r4k_flush_cache_mm;
diff --git a/arch/mips/mm/sc-mips.c b/arch/mips/mm/sc-mips.c
new file mode 100644
index 0000000..42b5096
--- /dev/null
+++ b/arch/mips/mm/sc-mips.c
@@ -0,0 +1,112 @@
+/*
+ * Copyright (C) 2006 Chris Dearman (chris@mips.com),
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+
+#include <asm/mipsregs.h>
+#include <asm/bcache.h>
+#include <asm/cacheops.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/mmu_context.h>
+#include <asm/r4kcache.h>
+
+/*
+ * MIPS32/MIPS64 L2 cache handling
+ */
+
+/*
+ * Writeback and invalidate the secondary cache before DMA.
+ */
+static void mips_sc_wback_inv(unsigned long addr, unsigned long size)
+{
+ blast_scache_range(addr, addr + size);
+}
+
+/*
+ * Invalidate the secondary cache before DMA.
+ */
+static void mips_sc_inv(unsigned long addr, unsigned long size)
+{
+ blast_inv_scache_range(addr, addr + size);
+}
+
+static void mips_sc_enable(void)
+{
+ /* L2 cache is permanently enabled */
+}
+
+static void mips_sc_disable(void)
+{
+ /* L2 cache is permanently enabled */
+}
+
+static struct bcache_ops mips_sc_ops = {
+ .bc_enable = mips_sc_enable,
+ .bc_disable = mips_sc_disable,
+ .bc_wback_inv = mips_sc_wback_inv,
+ .bc_inv = mips_sc_inv
+};
+
+static inline int __init mips_sc_probe(void)
+{
+ struct cpuinfo_mips *c = &current_cpu_data;
+ unsigned int config1, config2;
+ unsigned int tmp;
+
+ /* Mark as not present until probe completed */
+ c->scache.flags |= MIPS_CACHE_NOT_PRESENT;
+
+ /* Ignore anything but MIPSxx processors */
+ if (c->isa_level != MIPS_CPU_ISA_M32R1 &&
+ c->isa_level != MIPS_CPU_ISA_M32R2 &&
+ c->isa_level != MIPS_CPU_ISA_M64R1 &&
+ c->isa_level != MIPS_CPU_ISA_M64R2)
+ return 0;
+
+ /* Does this MIPS32/MIPS64 CPU have a config2 register? */
+ config1 = read_c0_config1();
+ if (!(config1 & MIPS_CONF_M))
+ return 0;
+
+ config2 = read_c0_config2();
+ tmp = (config2 >> 4) & 0x0f;
+ if (0 < tmp && tmp <= 7)
+ c->scache.linesz = 2 << tmp;
+ else
+ return 0;
+
+ tmp = (config2 >> 8) & 0x0f;
+ if (0 <= tmp && tmp <= 7)
+ c->scache.sets = 64 << tmp;
+ else
+ return 0;
+
+ tmp = (config2 >> 0) & 0x0f;
+ if (0 <= tmp && tmp <= 7)
+ c->scache.ways = tmp + 1;
+ else
+ return 0;
+
+ c->scache.waysize = c->scache.sets * c->scache.linesz;
+ c->scache.waybit = __ffs(c->scache.waysize);
+
+ c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT;
+
+ return 1;
+}
+
+int __init mips_sc_init(void)
+{
+ int found = mips_sc_probe ();
+ if (found) {
+ mips_sc_enable();
+ bcops = &mips_sc_ops;
+ }
+ return found;
+}
+
diff --git a/arch/mips/momentum/jaguar_atx/setup.c b/arch/mips/momentum/jaguar_atx/setup.c
index df14855..d041948 100644
--- a/arch/mips/momentum/jaguar_atx/setup.c
+++ b/arch/mips/momentum/jaguar_atx/setup.c
@@ -370,8 +370,8 @@ void __init plat_mem_setup(void)
pm_power_off = momenco_jaguar_power_off;
/*
- * initrd_start = (ulong)jaguar_initrd_start;
- * initrd_end = (ulong)jaguar_initrd_start + (ulong)jaguar_initrd_size;
+ * initrd_start = (unsigned long)jaguar_initrd_start;
+ * initrd_end = (unsigned long)jaguar_initrd_start + (ulong)jaguar_initrd_size;
* initrd_below_start_ok = 1;
*/
diff --git a/arch/mips/momentum/ocelot_c/setup.c b/arch/mips/momentum/ocelot_c/setup.c
index 257e1d1..a0ee006 100644
--- a/arch/mips/momentum/ocelot_c/setup.c
+++ b/arch/mips/momentum/ocelot_c/setup.c
@@ -242,8 +242,8 @@ void __init plat_mem_setup(void)
pm_power_off = momenco_ocelot_power_off;
/*
- * initrd_start = (ulong)ocelot_initrd_start;
- * initrd_end = (ulong)ocelot_initrd_start + (ulong)ocelot_initrd_size;
+ * initrd_start = (unsigned long)ocelot_initrd_start;
+ * initrd_end = (unsigned long)ocelot_initrd_start + (ulong)ocelot_initrd_size;
* initrd_below_start_ok = 1;
*/
diff --git a/arch/mips/momentum/ocelot_g/setup.c b/arch/mips/momentum/ocelot_g/setup.c
index 72143ab..39da02b 100644
--- a/arch/mips/momentum/ocelot_g/setup.c
+++ b/arch/mips/momentum/ocelot_g/setup.c
@@ -174,8 +174,8 @@ void __init plat_mem_setup(void)
pm_power_off = momenco_ocelot_power_off;
/*
- * initrd_start = (ulong)ocelot_initrd_start;
- * initrd_end = (ulong)ocelot_initrd_start + (ulong)ocelot_initrd_size;
+ * initrd_start = (unsigned long)ocelot_initrd_start;
+ * initrd_end = (unsigned long)ocelot_initrd_start + (ulong)ocelot_initrd_size;
* initrd_below_start_ok = 1;
*/
diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c
index f26a00e..a09c5f9 100644
--- a/arch/mips/oprofile/op_model_mipsxx.c
+++ b/arch/mips/oprofile/op_model_mipsxx.c
@@ -12,16 +12,70 @@
#include "op_impl.h"
-#define M_PERFCTL_EXL (1UL << 0)
-#define M_PERFCTL_KERNEL (1UL << 1)
-#define M_PERFCTL_SUPERVISOR (1UL << 2)
-#define M_PERFCTL_USER (1UL << 3)
-#define M_PERFCTL_INTERRUPT_ENABLE (1UL << 4)
-#define M_PERFCTL_EVENT(event) ((event) << 5)
-#define M_PERFCTL_WIDE (1UL << 30)
-#define M_PERFCTL_MORE (1UL << 31)
+#define M_PERFCTL_EXL (1UL << 0)
+#define M_PERFCTL_KERNEL (1UL << 1)
+#define M_PERFCTL_SUPERVISOR (1UL << 2)
+#define M_PERFCTL_USER (1UL << 3)
+#define M_PERFCTL_INTERRUPT_ENABLE (1UL << 4)
+#define M_PERFCTL_EVENT(event) ((event) << 5)
+#define M_PERFCTL_VPEID(vpe) ((vpe) << 16)
+#define M_PERFCTL_MT_EN(filter) ((filter) << 20)
+#define M_TC_EN_ALL M_PERFCTL_MT_EN(0)
+#define M_TC_EN_VPE M_PERFCTL_MT_EN(1)
+#define M_TC_EN_TC M_PERFCTL_MT_EN(2)
+#define M_PERFCTL_TCID(tcid) ((tcid) << 22)
+#define M_PERFCTL_WIDE (1UL << 30)
+#define M_PERFCTL_MORE (1UL << 31)
+
+#define M_COUNTER_OVERFLOW (1UL << 31)
+
+#ifdef CONFIG_MIPS_MT_SMP
+#define WHAT (M_TC_EN_VPE | M_PERFCTL_VPEID(smp_processor_id()))
+#else
+#define WHAT 0
+#endif
-#define M_COUNTER_OVERFLOW (1UL << 31)
+#define __define_perf_accessors(r, n, np) \
+ \
+static inline unsigned int r_c0_ ## r ## n(void) \
+{ \
+ unsigned int cpu = smp_processor_id(); \
+ \
+ switch (cpu) { \
+ case 0: \
+ return read_c0_ ## r ## n(); \
+ case 1: \
+ return read_c0_ ## r ## np(); \
+ default: \
+ BUG(); \
+ } \
+} \
+ \
+static inline void w_c0_ ## r ## n(unsigned int value) \
+{ \
+ unsigned int cpu = smp_processor_id(); \
+ \
+ switch (cpu) { \
+ case 0: \
+ write_c0_ ## r ## n(value); \
+ return; \
+ case 1: \
+ write_c0_ ## r ## np(value); \
+ return; \
+ default: \
+ BUG(); \
+ } \
+} \
+
+__define_perf_accessors(perfcntr, 0, 2)
+__define_perf_accessors(perfcntr, 1, 3)
+__define_perf_accessors(perfcntr, 2, 2)
+__define_perf_accessors(perfcntr, 3, 2)
+
+__define_perf_accessors(perfctrl, 0, 2)
+__define_perf_accessors(perfctrl, 1, 3)
+__define_perf_accessors(perfctrl, 2, 2)
+__define_perf_accessors(perfctrl, 3, 2)
struct op_mips_model op_model_mipsxx_ops;
@@ -66,17 +120,17 @@ static void mipsxx_cpu_setup (void *args)
switch (counters) {
case 4:
- write_c0_perfctrl3(0);
- write_c0_perfcntr3(reg.counter[3]);
+ w_c0_perfctrl3(0);
+ w_c0_perfcntr3(reg.counter[3]);
case 3:
- write_c0_perfctrl2(0);
- write_c0_perfcntr2(reg.counter[2]);
+ w_c0_perfctrl2(0);
+ w_c0_perfcntr2(reg.counter[2]);
case 2:
- write_c0_perfctrl1(0);
- write_c0_perfcntr1(reg.counter[1]);
+ w_c0_perfctrl1(0);
+ w_c0_perfcntr1(reg.counter[1]);
case 1:
- write_c0_perfctrl0(0);
- write_c0_perfcntr0(reg.counter[0]);
+ w_c0_perfctrl0(0);
+ w_c0_perfcntr0(reg.counter[0]);
}
}
@@ -87,13 +141,13 @@ static void mipsxx_cpu_start(void *args)
switch (counters) {
case 4:
- write_c0_perfctrl3(reg.control[3]);
+ w_c0_perfctrl3(WHAT | reg.control[3]);
case 3:
- write_c0_perfctrl2(reg.control[2]);
+ w_c0_perfctrl2(WHAT | reg.control[2]);
case 2:
- write_c0_perfctrl1(reg.control[1]);
+ w_c0_perfctrl1(WHAT | reg.control[1]);
case 1:
- write_c0_perfctrl0(reg.control[0]);
+ w_c0_perfctrl0(WHAT | reg.control[0]);
}
}
@@ -104,13 +158,13 @@ static void mipsxx_cpu_stop(void *args)
switch (counters) {
case 4:
- write_c0_perfctrl3(0);
+ w_c0_perfctrl3(0);
case 3:
- write_c0_perfctrl2(0);
+ w_c0_perfctrl2(0);
case 2:
- write_c0_perfctrl1(0);
+ w_c0_perfctrl1(0);
case 1:
- write_c0_perfctrl0(0);
+ w_c0_perfctrl0(0);
}
}
@@ -124,12 +178,12 @@ static int mipsxx_perfcount_handler(struct pt_regs *regs)
switch (counters) {
#define HANDLE_COUNTER(n) \
case n + 1: \
- control = read_c0_perfctrl ## n(); \
- counter = read_c0_perfcntr ## n(); \
+ control = r_c0_perfctrl ## n(); \
+ counter = r_c0_perfcntr ## n(); \
if ((control & M_PERFCTL_INTERRUPT_ENABLE) && \
(counter & M_COUNTER_OVERFLOW)) { \
oprofile_add_sample(regs, n); \
- write_c0_perfcntr ## n(reg.counter[n]); \
+ w_c0_perfcntr ## n(reg.counter[n]); \
handled = 1; \
}
HANDLE_COUNTER(3)
@@ -143,35 +197,47 @@ static int mipsxx_perfcount_handler(struct pt_regs *regs)
#define M_CONFIG1_PC (1 << 4)
-static inline int n_counters(void)
+static inline int __n_counters(void)
{
if (!(read_c0_config1() & M_CONFIG1_PC))
return 0;
- if (!(read_c0_perfctrl0() & M_PERFCTL_MORE))
+ if (!(r_c0_perfctrl0() & M_PERFCTL_MORE))
return 1;
- if (!(read_c0_perfctrl1() & M_PERFCTL_MORE))
+ if (!(r_c0_perfctrl1() & M_PERFCTL_MORE))
return 2;
- if (!(read_c0_perfctrl2() & M_PERFCTL_MORE))
+ if (!(r_c0_perfctrl2() & M_PERFCTL_MORE))
return 3;
return 4;
}
+static inline int n_counters(void)
+{
+ int counters = __n_counters();
+
+#ifndef CONFIG_SMP
+ if (current_cpu_data.cputype == CPU_34K)
+ return counters >> 1;
+#endif
+
+ return counters;
+}
+
static inline void reset_counters(int counters)
{
switch (counters) {
case 4:
- write_c0_perfctrl3(0);
- write_c0_perfcntr3(0);
+ w_c0_perfctrl3(0);
+ w_c0_perfcntr3(0);
case 3:
- write_c0_perfctrl2(0);
- write_c0_perfcntr2(0);
+ w_c0_perfctrl2(0);
+ w_c0_perfcntr2(0);
case 2:
- write_c0_perfctrl1(0);
- write_c0_perfcntr1(0);
+ w_c0_perfctrl1(0);
+ w_c0_perfcntr1(0);
case 1:
- write_c0_perfctrl0(0);
- write_c0_perfcntr0(0);
+ w_c0_perfctrl0(0);
+ w_c0_perfcntr0(0);
}
}
@@ -201,7 +267,6 @@ static int __init mipsxx_init(void)
op_model_mipsxx_ops.cpu_type = "mips/25K";
break;
-#ifndef CONFIG_SMP
case CPU_34K:
op_model_mipsxx_ops.cpu_type = "mips/34K";
break;
@@ -209,7 +274,6 @@ static int __init mipsxx_init(void)
case CPU_74K:
op_model_mipsxx_ops.cpu_type = "mips/74K";
break;
-#endif
case CPU_5KC:
op_model_mipsxx_ops.cpu_type = "mips/5K";
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 465778c..35d5927 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -23,7 +23,7 @@ obj-$(CONFIG_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o
#
# These are still pretty much in the old state, watch, go blind.
#
-obj-$(CONFIG_BASLER_EXCITE) = ops-titan.o pci-excite.o fixup-excite.o
+obj-$(CONFIG_BASLER_EXCITE) += ops-titan.o pci-excite.o fixup-excite.o
obj-$(CONFIG_DDB5477) += fixup-ddb5477.o pci-ddb5477.o ops-ddb5477.o
obj-$(CONFIG_LASAT) += pci-lasat.o
obj-$(CONFIG_MIPS_ATLAS) += fixup-atlas.o
diff --git a/arch/mips/pci/ops-tx4927.c b/arch/mips/pci/ops-tx4927.c
index 7688b77..150419c 100644
--- a/arch/mips/pci/ops-tx4927.c
+++ b/arch/mips/pci/ops-tx4927.c
@@ -119,7 +119,7 @@ static int tx4927_pcibios_read_config(struct pci_bus *bus, unsigned int devfn, i
switch (size) {
case 1:
- *val = *(volatile u8 *) ((ulong) & tx4927_pcicptr->
+ *val = *(volatile u8 *) ((unsigned long) & tx4927_pcicptr->
g2pcfgdata |
#ifdef __LITTLE_ENDIAN
(where & 3));
@@ -128,7 +128,7 @@ static int tx4927_pcibios_read_config(struct pci_bus *bus, unsigned int devfn, i
#endif
break;
case 2:
- *val = *(volatile u16 *) ((ulong) & tx4927_pcicptr->
+ *val = *(volatile u16 *) ((unsigned long) & tx4927_pcicptr->
g2pcfgdata |
#ifdef __LITTLE_ENDIAN
(where & 3));
@@ -168,7 +168,7 @@ static int tx4927_pcibios_write_config(struct pci_bus *bus, unsigned int devfn,
switch (size) {
case 1:
- *(volatile u8 *) ((ulong) & tx4927_pcicptr->
+ *(volatile u8 *) ((unsigned long) & tx4927_pcicptr->
g2pcfgdata |
#ifdef __LITTLE_ENDIAN
(where & 3)) = val;
@@ -178,7 +178,7 @@ static int tx4927_pcibios_write_config(struct pci_bus *bus, unsigned int devfn,
break;
case 2:
- *(volatile u16 *) ((ulong) & tx4927_pcicptr->
+ *(volatile u16 *) ((unsigned long) & tx4927_pcicptr->
g2pcfgdata |
#ifdef __LITTLE_ENDIAN
(where & 3)) = val;
diff --git a/arch/mips/pci/ops-tx4938.c b/arch/mips/pci/ops-tx4938.c
index 0ff0834..4450070 100644
--- a/arch/mips/pci/ops-tx4938.c
+++ b/arch/mips/pci/ops-tx4938.c
@@ -106,7 +106,7 @@ static int tx4938_pcibios_read_config(struct pci_bus *bus, unsigned int devfn,
switch (size) {
case 1:
- *val = *(volatile u8 *) ((ulong) & tx4938_pcicptr->g2pcfgdata |
+ *val = *(volatile u8 *) ((unsigned long) & tx4938_pcicptr->g2pcfgdata |
#ifdef __BIG_ENDIAN
((where & 3) ^ 3));
#else
@@ -114,7 +114,7 @@ static int tx4938_pcibios_read_config(struct pci_bus *bus, unsigned int devfn,
#endif
break;
case 2:
- *val = *(volatile u16 *) ((ulong) & tx4938_pcicptr->g2pcfgdata |
+ *val = *(volatile u16 *) ((unsigned long) & tx4938_pcicptr->g2pcfgdata |
#ifdef __BIG_ENDIAN
((where & 3) ^ 2));
#else
@@ -154,7 +154,7 @@ static int tx4938_pcibios_write_config(struct pci_bus *bus, unsigned int devfn,
switch (size) {
case 1:
- *(volatile u8 *) ((ulong) & tx4938_pcicptr->g2pcfgdata |
+ *(volatile u8 *) ((unsigned long) & tx4938_pcicptr->g2pcfgdata |
#ifdef __BIG_ENDIAN
((where & 3) ^ 3)) = val;
#else
@@ -162,7 +162,7 @@ static int tx4938_pcibios_write_config(struct pci_bus *bus, unsigned int devfn,
#endif
break;
case 2:
- *(volatile u16 *) ((ulong) & tx4938_pcicptr->g2pcfgdata |
+ *(volatile u16 *) ((unsigned long) & tx4938_pcicptr->g2pcfgdata |
#ifdef __BIG_ENDIAN
((where & 0x3) ^ 0x2)) = val;
#else
diff --git a/arch/mips/sgi-ip27/Kconfig b/arch/mips/sgi-ip27/Kconfig
index f14ef38..5e960ae 100644
--- a/arch/mips/sgi-ip27/Kconfig
+++ b/arch/mips/sgi-ip27/Kconfig
@@ -33,12 +33,13 @@ config MAPPED_KERNEL
depends on SGI_IP27
help
Change the way a Linux kernel is loaded into memory on a MIPS64
- machine. This is required in order to support text replication and
+ machine. This is required in order to support text replication on
NUMA. If you need to understand it, read the source code.
config REPLICATE_KTEXT
bool "Kernel text replication support"
depends on SGI_IP27
+ select MAPPED_KERNEL
help
Say Y here to enable replicating the kernel text across multiple
nodes in a NUMA cluster. This trades memory for speed.
diff --git a/arch/mips/sgi-ip27/Makefile b/arch/mips/sgi-ip27/Makefile
index 686ba14..a457263 100644
--- a/arch/mips/sgi-ip27/Makefile
+++ b/arch/mips/sgi-ip27/Makefile
@@ -2,11 +2,12 @@
# Makefile for the IP27 specific kernel interface routines under Linux.
#
-obj-y := ip27-berr.o ip27-console.o ip27-irq.o ip27-init.o \
- ip27-klconfig.o ip27-klnuma.o ip27-memory.o ip27-nmi.o ip27-reset.o \
- ip27-timer.o ip27-hubio.o ip27-xtalk.o
+obj-y := ip27-berr.o ip27-irq.o ip27-init.o ip27-klconfig.o ip27-klnuma.o \
+ ip27-memory.o ip27-nmi.o ip27-reset.o ip27-timer.o ip27-hubio.o \
+ ip27-xtalk.o
-obj-$(CONFIG_KGDB) += ip27-dbgio.o
-obj-$(CONFIG_SMP) += ip27-smp.o
+obj-$(CONFIG_EARLY_PRINTK) += ip27-console.o
+obj-$(CONFIG_KGDB) += ip27-dbgio.o
+obj-$(CONFIG_SMP) += ip27-smp.o
EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/sgi-ip27/ip27-console.c b/arch/mips/sgi-ip27/ip27-console.c
index 3e1ac29..14211e3 100644
--- a/arch/mips/sgi-ip27/ip27-console.c
+++ b/arch/mips/sgi-ip27/ip27-console.c
@@ -46,33 +46,29 @@ void prom_putchar(char c)
uart->iu_thr = c;
}
-char __init prom_getchar(void)
+static void ioc3_console_write(struct console *con, const char *s, unsigned n)
{
- return 0;
+ while (n-- && *s) {
+ if (*s == '\n')
+ prom_putchar('\r');
+ prom_putchar(*s);
+ s++;
+ }
}
-static void inline ioc3_console_probe(void)
-{
- struct uart_port up;
-
- /*
- * Register to interrupt zero because we share the interrupt with
- * the serial driver which we don't properly support yet.
- */
- memset(&up, 0, sizeof(up));
- up.membase = (unsigned char *) console_uart();
- up.irq = 0;
- up.uartclk = IOC3_CLK;
- up.regshift = 0;
- up.iotype = UPIO_MEM;
- up.flags = IOC3_FLAGS;
- up.line = 0;
+static struct console ioc3_console = {
+ .name = "ioc3",
+ .write = ioc3_console_write,
+ .flags = CON_PRINTBUFFER | CON_BOOT,
+ .index = -1
+};
- if (early_serial_setup(&up))
- printk(KERN_ERR "Early serial init of port 0 failed\n");
+__init void ip27_setup_console(void)
+{
+ register_console(&ioc3_console);
}
-__init void ip27_setup_console(void)
+void __init disable_early_printk(void)
{
- ioc3_console_probe();
+ unregister_console(&ioc3_console);
}
diff --git a/arch/mips/sibyte/Kconfig b/arch/mips/sibyte/Kconfig
index 816aee7..ec7a2cf 100644
--- a/arch/mips/sibyte/Kconfig
+++ b/arch/mips/sibyte/Kconfig
@@ -3,6 +3,7 @@ config SIBYTE_SB1250
select HW_HAS_PCI
select SIBYTE_HAS_LDT
select SIBYTE_SB1xxx_SOC
+ select SYS_SUPPORTS_SMP
config SIBYTE_BCM1120
bool
@@ -30,11 +31,13 @@ config SIBYTE_BCM1x80
bool
select HW_HAS_PCI
select SIBYTE_SB1xxx_SOC
+ select SYS_SUPPORTS_SMP
config SIBYTE_BCM1x55
bool
select HW_HAS_PCI
select SIBYTE_SB1xxx_SOC
+ select SYS_SUPPORTS_SMP
config SIBYTE_SB1xxx_SOC
bool
diff --git a/include/asm-mips/asmmacro.h b/include/asm-mips/asmmacro.h
index 2c42f6b..92e62ef 100644
--- a/include/asm-mips/asmmacro.h
+++ b/include/asm-mips/asmmacro.h
@@ -26,14 +26,14 @@
ori \reg, \reg, TCSTATUS_IXMT
xori \reg, \reg, TCSTATUS_IXMT
mtc0 \reg, CP0_TCSTATUS
- ehb
+ _ehb
.endm
.macro local_irq_disable reg=t0
mfc0 \reg, CP0_TCSTATUS
ori \reg, \reg, TCSTATUS_IXMT
mtc0 \reg, CP0_TCSTATUS
- ehb
+ _ehb
.endm
#else
.macro local_irq_enable reg=t0
diff --git a/include/asm-mips/cpu-features.h b/include/asm-mips/cpu-features.h
index 881ce1f..44285a9 100644
--- a/include/asm-mips/cpu-features.h
+++ b/include/asm-mips/cpu-features.h
@@ -187,19 +187,15 @@
# endif
#endif
-#ifdef CONFIG_CPU_MIPSR2
-# if defined(CONFIG_CPU_MIPSR2_IRQ_VI) && !defined(cpu_has_vint)
-# define cpu_has_vint (cpu_data[0].options & MIPS_CPU_VINT)
-# else
-# define cpu_has_vint 0
-# endif
-# if defined(CONFIG_CPU_MIPSR2_IRQ_EI) && !defined(cpu_has_veic)
-# define cpu_has_veic (cpu_data[0].options & MIPS_CPU_VEIC)
-# else
-# define cpu_has_veic 0
-# endif
-#else
+#if defined(CONFIG_CPU_MIPSR2_IRQ_VI) && !defined(cpu_has_vint)
+# define cpu_has_vint (cpu_data[0].options & MIPS_CPU_VINT)
+#elif !defined(cpu_has_vint)
# define cpu_has_vint 0
+#endif
+
+#if defined(CONFIG_CPU_MIPSR2_IRQ_EI) && !defined(cpu_has_veic)
+# define cpu_has_veic (cpu_data[0].options & MIPS_CPU_VEIC)
+#elif !defined(cpu_has_veic)
# define cpu_has_veic 0
#endif
diff --git a/include/asm-mips/fixmap.h b/include/asm-mips/fixmap.h
index 1cadefb..6959bdb 100644
--- a/include/asm-mips/fixmap.h
+++ b/include/asm-mips/fixmap.h
@@ -69,7 +69,11 @@ extern void __set_fixmap (enum fixed_addresses idx,
* the start of the fixmap, and leave one page empty
* at the top of mem..
*/
+#if defined(CONFIG_CPU_TX39XX) || defined(CONFIG_CPU_TX49XX)
+#define FIXADDR_TOP (0xff000000UL - 0x2000)
+#else
#define FIXADDR_TOP (0xffffe000UL)
+#endif
#define FIXADDR_SIZE (__end_of_fixed_addresses << PAGE_SHIFT)
#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE)
diff --git a/include/asm-mips/hazards.h b/include/asm-mips/hazards.h
index 66943c4..25f5e8a 100644
--- a/include/asm-mips/hazards.h
+++ b/include/asm-mips/hazards.h
@@ -69,10 +69,10 @@
* Use a macro for ehb unless explicit support for MIPSR2 is enabled
*/
-#define irq_enable_hazard
+#define irq_enable_hazard \
_ehb
-#define irq_disable_hazard
+#define irq_disable_hazard \
_ehb
#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000)
diff --git a/include/asm-mips/irq.h b/include/asm-mips/irq.h
index d35c617..896550b 100644
--- a/include/asm-mips/irq.h
+++ b/include/asm-mips/irq.h
@@ -76,4 +76,8 @@ extern int setup_irq_smtc(unsigned int irq, struct irqaction * new,
unsigned long hwmask);
#endif /* CONFIG_MIPS_MT_SMTC */
+#ifdef CONFIG_SMP
+#define ARCH_HAS_IRQ_PER_CPU
+#endif
+
#endif /* _ASM_IRQ_H */
diff --git a/include/asm-mips/mach-au1x00/au1xxx_psc.h b/include/asm-mips/mach-au1x00/au1xxx_psc.h
index d7cbacd..1bd4e27 100644
--- a/include/asm-mips/mach-au1x00/au1xxx_psc.h
+++ b/include/asm-mips/mach-au1x00/au1xxx_psc.h
@@ -512,7 +512,7 @@ typedef struct psc_smb {
/* Transmit register control.
*/
-#define PSC_SMBTXRX_RSR (1 << 30)
+#define PSC_SMBTXRX_RSR (1 << 28)
#define PSC_SMBTXRX_STP (1 << 29)
#define PSC_SMBTXRX_DATAMASK (0xff)
diff --git a/include/asm-mips/mipsregs.h b/include/asm-mips/mipsregs.h
index 6739779..9192d76 100644
--- a/include/asm-mips/mipsregs.h
+++ b/include/asm-mips/mipsregs.h
@@ -1459,7 +1459,8 @@ static inline void __emt(unsigned int previous)
static inline void __ehb(void)
{
__asm__ __volatile__(
- " ehb \n");
+ " .set mips32r2 \n"
+ " ehb \n" " .set mips0 \n");
}
/*
diff --git a/include/asm-mips/sn/ioc3.h b/include/asm-mips/sn/ioc3.h
index f7d530f..0996777 100644
--- a/include/asm-mips/sn/ioc3.h
+++ b/include/asm-mips/sn/ioc3.h
@@ -5,6 +5,8 @@
#ifndef _IOC3_H
#define _IOC3_H
+#include <linux/types.h>
+
/* SUPERIO uart register map */
typedef volatile struct ioc3_uartregs {
union {
diff --git a/include/asm-mips/sn/klconfig.h b/include/asm-mips/sn/klconfig.h
index 52238e6..b63cd06 100644
--- a/include/asm-mips/sn/klconfig.h
+++ b/include/asm-mips/sn/klconfig.h
@@ -602,7 +602,7 @@ typedef struct klcpu_s { /* CPU */
typedef struct klhub_s { /* HUB */
klinfo_t hub_info;
- uint hub_flags; /* PCFG_HUB_xxx flags */
+ unsigned int hub_flags; /* PCFG_HUB_xxx flags */
klport_t hub_port; /* hub is connected to this */
nic_t hub_box_nic; /* nic of containing box */
klconf_off_t hub_mfg_nic; /* MFG NIC string */
@@ -611,7 +611,7 @@ typedef struct klhub_s { /* HUB */
typedef struct klhub_uart_s { /* HUB */
klinfo_t hubuart_info;
- uint hubuart_flags; /* PCFG_HUB_xxx flags */
+ unsigned int hubuart_flags; /* PCFG_HUB_xxx flags */
nic_t hubuart_box_nic; /* nic of containing box */
} klhub_uart_t ;
@@ -710,7 +710,7 @@ typedef struct klvmed_s { /* VME DEVICE - VME BOARD */
/* XXX - Don't we need the number of ports here?!? */
typedef struct klrou_s { /* ROUTER */
klinfo_t rou_info ;
- uint rou_flags ; /* PCFG_ROUTER_xxx flags */
+ unsigned int rou_flags ; /* PCFG_ROUTER_xxx flags */
nic_t rou_box_nic ; /* nic of the containing module */
klport_t rou_port[MAX_ROUTER_PORTS + 1] ; /* array index 1 to 6 */
klconf_off_t rou_mfg_nic ; /* MFG NIC string */
@@ -733,8 +733,8 @@ typedef struct klgfx_s { /* GRAPHICS Device */
klinfo_t gfx_info;
klconf_off_t old_gndevs; /* for compatibility with older proms */
klconf_off_t old_gdoff0; /* for compatibility with older proms */
- uint cookie; /* for compatibility with older proms */
- uint moduleslot;
+ unsigned int cookie; /* for compatibility with older proms */
+ unsigned int moduleslot;
struct klgfx_s *gfx_next_pipe;
graphics_t gfx_specific;
klconf_off_t pad0; /* for compatibility with older proms */
diff --git a/include/asm-mips/stackframe.h b/include/asm-mips/stackframe.h
index 513aa51..158a4cd 100644
--- a/include/asm-mips/stackframe.h
+++ b/include/asm-mips/stackframe.h
@@ -304,7 +304,7 @@
mfc0 v0, CP0_TCSTATUS
ori v0, TCSTATUS_IXMT
mtc0 v0, CP0_TCSTATUS
- ehb
+ _ehb
DMT 5 # dmt a1
jal mips_ihb
#endif /* CONFIG_MIPS_MT_SMTC */
@@ -325,14 +325,14 @@
* restore TCStatus.IXMT.
*/
LONG_L v1, PT_TCSTATUS(sp)
- ehb
+ _ehb
mfc0 v0, CP0_TCSTATUS
andi v1, TCSTATUS_IXMT
/* We know that TCStatua.IXMT should be set from above */
xori v0, v0, TCSTATUS_IXMT
or v0, v0, v1
mtc0 v0, CP0_TCSTATUS
- ehb
+ _ehb
andi a1, a1, VPECONTROL_TE
beqz a1, 1f
emt
@@ -411,7 +411,7 @@
/* Clear TKSU, leave IXMT */
xori t0, 0x00001800
mtc0 t0, CP0_TCSTATUS
- ehb
+ _ehb
/* We need to leave the global IE bit set, but clear EXL...*/
mfc0 t0, CP0_STATUS
ori t0, ST0_EXL | ST0_ERL
@@ -438,7 +438,7 @@
* and enable interrupts only for the
* current TC, using the TCStatus register.
*/
- ehb
+ _ehb
mfc0 t0,CP0_TCSTATUS
/* Fortunately CU 0 is in the same place in both registers */
/* Set TCU0, TKSU (for later inversion) and IXMT */
@@ -447,7 +447,7 @@
/* Clear TKSU *and* IXMT */
xori t0, 0x00001c00
mtc0 t0, CP0_TCSTATUS
- ehb
+ _ehb
/* We need to leave the global IE bit set, but clear EXL...*/
mfc0 t0, CP0_STATUS
ori t0, ST0_EXL
@@ -479,7 +479,7 @@
andi v1, v0, TCSTATUS_IXMT
ori v0, TCSTATUS_IXMT
mtc0 v0, CP0_TCSTATUS
- ehb
+ _ehb
DMT 2 # dmt v0
/*
* We don't know a priori if ra is "live"
@@ -495,7 +495,7 @@
xori t0, 0x1e
mtc0 t0, CP0_STATUS
#ifdef CONFIG_MIPS_MT_SMTC
- ehb
+ _ehb
andi v0, v0, VPECONTROL_TE
beqz v0, 2f
nop /* delay slot */
diff --git a/include/asm-mips/unistd.h b/include/asm-mips/unistd.h
index 8bb0bb9..809f9f5 100644
--- a/include/asm-mips/unistd.h
+++ b/include/asm-mips/unistd.h
@@ -326,16 +326,17 @@
#define __NR_unshare (__NR_Linux + 303)
#define __NR_splice (__NR_Linux + 304)
#define __NR_sync_file_range (__NR_Linux + 305)
+#define __NR_tee (__NR_Linux + 306)
/*
* Offset of the last Linux o32 flavoured syscall
*/
-#define __NR_Linux_syscalls 305
+#define __NR_Linux_syscalls 306
#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
#define __NR_O32_Linux 4000
-#define __NR_O32_Linux_syscalls 305
+#define __NR_O32_Linux_syscalls 306
#if _MIPS_SIM == _MIPS_SIM_ABI64
@@ -608,16 +609,17 @@
#define __NR_unshare (__NR_Linux + 262)
#define __NR_splice (__NR_Linux + 263)
#define __NR_sync_file_range (__NR_Linux + 264)
+#define __NR_tee (__NR_Linux + 265)
/*
* Offset of the last Linux 64-bit flavoured syscall
*/
-#define __NR_Linux_syscalls 264
+#define __NR_Linux_syscalls 265
#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
#define __NR_64_Linux 5000
-#define __NR_64_Linux_syscalls 264
+#define __NR_64_Linux_syscalls 265
#if _MIPS_SIM == _MIPS_SIM_NABI32
@@ -894,16 +896,17 @@
#define __NR_unshare (__NR_Linux + 266)
#define __NR_splice (__NR_Linux + 267)
#define __NR_sync_file_range (__NR_Linux + 268)
+#define __NR_tee (__NR_Linux + 269)
/*
* Offset of the last N32 flavoured syscall
*/
-#define __NR_Linux_syscalls 268
+#define __NR_Linux_syscalls 269
#endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
#define __NR_N32_Linux 6000
-#define __NR_N32_Linux_syscalls 268
+#define __NR_N32_Linux_syscalls 269
#ifdef __KERNEL__
diff --git a/include/linux/elf-em.h b/include/linux/elf-em.h
index 114a96d..6a5796c 100644
--- a/include/linux/elf-em.h
+++ b/include/linux/elf-em.h
@@ -11,7 +11,12 @@
#define EM_486 6 /* Perhaps disused */
#define EM_860 7
#define EM_MIPS 8 /* MIPS R3000 (officially, big-endian only) */
+ /* Next two are historical and binaries and
+ modules of these types will be rejected by
+ Linux. */
+#define EM_MIPS_RS3_LE 10 /* MIPS R3000 little-endian */
#define EM_MIPS_RS4_BE 10 /* MIPS R4000 big-endian */
+
#define EM_PARISC 15 /* HPPA */
#define EM_SPARC32PLUS 18 /* Sun's "v8plus" */
#define EM_PPC 20 /* PowerPC */