summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/mach-orion5x/common.h3
-rw-r--r--arch/arm/mach-orion5x/db88f5281-setup.c11
-rw-r--r--arch/arm/mach-orion5x/dns323-setup.c13
-rw-r--r--arch/arm/mach-orion5x/kurobox_pro-setup.c14
-rw-r--r--arch/arm/mach-orion5x/pci.c20
-rw-r--r--arch/arm/mach-orion5x/rd88f5182-setup.c9
-rw-r--r--arch/arm/mach-orion5x/ts209-setup.c11
7 files changed, 54 insertions, 27 deletions
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
index f4c4c9a..14adf8d 100644
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@@ -33,10 +33,9 @@ struct pci_sys_data;
struct pci_bus;
void orion5x_pcie_id(u32 *dev, u32 *rev);
-int orion5x_pcie_local_bus_nr(void);
-int orion5x_pci_local_bus_nr(void);
int orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys);
struct pci_bus *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys);
+int orion5x_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin);
/*
* Valid GPIO pins according to MPP setup, used by machine-setup.
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index 872aed3..83e9ad4 100644
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -241,14 +241,17 @@ void __init db88f5281_pci_preinit(void)
static int __init db88f5281_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
+ int irq;
+
/*
- * PCIE IRQ is connected internally (not GPIO)
+ * Check for devices with hard-wired IRQs.
*/
- if (dev->bus->number == orion5x_pcie_local_bus_nr())
- return IRQ_ORION5X_PCIE0_INT;
+ irq = orion5x_pci_map_irq(dev, slot, pin);
+ if (irq != -1)
+ return irq;
/*
- * PCI IRQs are connected via GPIOs
+ * PCI IRQs are connected via GPIOs.
*/
switch (slot - DB88F5281_PCI_SLOT0_OFFS) {
case 0:
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index d67790e..4618173 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -43,11 +43,16 @@
static int __init dns323_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
- /* PCI-E */
- if (dev->bus->number == orion5x_pcie_local_bus_nr())
- return IRQ_ORION5X_PCIE0_INT;
+ int irq;
- pr_err("%s: requested mapping for unknown bus\n", __func__);
+ /*
+ * Check for devices with hard-wired IRQs.
+ */
+ irq = orion5x_pci_map_irq(dev, slot, pin);
+ if (irq != -1)
+ return irq;
+
+ pr_err("%s: requested mapping for unknown device\n", __func__);
return -1;
}
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index 9141345..36cf763 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -120,13 +120,19 @@ static struct platform_device kurobox_pro_nor_flash = {
static int __init kurobox_pro_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
+ int irq;
+
+ /*
+ * Check for devices with hard-wired IRQs.
+ */
+ irq = orion5x_pci_map_irq(dev, slot, pin);
+ if (irq != -1)
+ return irq;
+
/*
* PCI isn't used on the Kuro
*/
- if (dev->bus->number == orion5x_pcie_local_bus_nr())
- return IRQ_ORION5X_PCIE0_INT;
- else
- printk(KERN_ERR "kurobox_pro_pci_map_irq failed, unknown bus\n");
+ printk(KERN_ERR "kurobox_pro_pci_map_irq failed, unknown bus\n");
return -1;
}
diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c
index fdf99fc..9d5d39f 100644
--- a/arch/arm/mach-orion5x/pci.c
+++ b/arch/arm/mach-orion5x/pci.c
@@ -41,11 +41,6 @@ void __init orion5x_pcie_id(u32 *dev, u32 *rev)
*rev = orion_pcie_rev(PCIE_BASE);
}
-int __init orion5x_pcie_local_bus_nr(void)
-{
- return orion_pcie_get_local_bus_nr(PCIE_BASE);
-}
-
static int pcie_valid_config(int bus, int dev)
{
/*
@@ -269,7 +264,7 @@ static int __init pcie_setup(struct pci_sys_data *sys)
*/
static DEFINE_SPINLOCK(orion5x_pci_lock);
-int orion5x_pci_local_bus_nr(void)
+static int orion5x_pci_local_bus_nr(void)
{
u32 conf = orion5x_read(PCI_P2P_CONF);
return((conf & PCI_P2P_BUS_MASK) >> PCI_P2P_BUS_OFFS);
@@ -557,3 +552,16 @@ struct pci_bus __init *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys
return bus;
}
+
+int __init orion5x_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ int bus = dev->bus->number;
+
+ /*
+ * PCIe endpoint?
+ */
+ if (bus < orion5x_pci_local_bus_nr())
+ return IRQ_ORION5X_PCIE0_INT;
+
+ return -1;
+}
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index 37e8b2d..b4315df 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -172,11 +172,14 @@ void __init rd88f5182_pci_preinit(void)
static int __init rd88f5182_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
+ int irq;
+
/*
- * PCI-E isn't used on the RD2
+ * Check for devices with hard-wired IRQs.
*/
- if (dev->bus->number == orion5x_pcie_local_bus_nr())
- return IRQ_ORION5X_PCIE0_INT;
+ irq = orion5x_pci_map_irq(dev, slot, pin);
+ if (irq != -1)
+ return irq;
/*
* PCI IRQs are connected via GPIOs
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index fd43863..d3a8922 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -141,14 +141,17 @@ void __init qnap_ts209_pci_preinit(void)
static int __init qnap_ts209_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
+ int irq;
+
/*
- * PCIE IRQ is connected internally (not GPIO)
+ * Check for devices with hard-wired IRQs.
*/
- if (dev->bus->number == orion5x_pcie_local_bus_nr())
- return IRQ_ORION5X_PCIE0_INT;
+ irq = orion5x_pci_map_irq(dev, slot, pin);
+ if (irq != -1)
+ return irq;
/*
- * PCI IRQs are connected via GPIOs
+ * PCI IRQs are connected via GPIOs.
*/
switch (slot - QNAP_TS209_PCI_SLOT0_OFFS) {
case 0: