diff options
-rw-r--r-- | Documentation/feature-removal-schedule.txt | 14 | ||||
-rw-r--r-- | drivers/staging/Kconfig | 2 | ||||
-rw-r--r-- | drivers/staging/cs5535_gpio/Kconfig | 11 | ||||
-rw-r--r-- | drivers/staging/cs5535_gpio/Makefile | 1 | ||||
-rw-r--r-- | drivers/staging/cs5535_gpio/TODO | 6 | ||||
-rw-r--r-- | drivers/staging/cs5535_gpio/cs5535_gpio.c | 260 |
6 files changed, 0 insertions, 294 deletions
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 1a9446b..15545d4 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -193,20 +193,6 @@ Why: /proc/<pid>/oom_adj allows userspace to influence the oom killer's --------------------------- -What: CS5535/CS5536 obsolete GPIO driver -When: June 2011 -Files: drivers/staging/cs5535_gpio/* -Check: drivers/staging/cs5535_gpio/cs5535_gpio.c -Why: A newer driver replaces this; it is drivers/gpio/cs5535-gpio.c, and - integrates with the Linux GPIO subsystem. The old driver has been - moved to staging, and will be removed altogether around 2.6.40. - Please test the new driver, and ensure that the functionality you - need and any bugfixes from the old driver are available in the new - one. -Who: Andres Salomon <dilinger@queued.net> - --------------------------- - What: remove EXPORT_SYMBOL(kernel_thread) When: August 2006 Files: arch/*/kernel/*_ksyms.c diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index 196284d..a85c11a 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -100,8 +100,6 @@ source "drivers/staging/sep/Kconfig" source "drivers/staging/iio/Kconfig" -source "drivers/staging/cs5535_gpio/Kconfig" - source "drivers/staging/zram/Kconfig" source "drivers/staging/zcache/Kconfig" diff --git a/drivers/staging/cs5535_gpio/Kconfig b/drivers/staging/cs5535_gpio/Kconfig deleted file mode 100644 index a1b3a8d..0000000 --- a/drivers/staging/cs5535_gpio/Kconfig +++ /dev/null @@ -1,11 +0,0 @@ -config CS5535_GPIO - tristate "AMD CS5535/CS5536 GPIO (Geode Companion Device)" - depends on X86_32 - help - Note: this driver is DEPRECATED. Please use the cs5535-gpio module - in the GPIO section instead (CONFIG_GPIO_CS5535). - - Give userspace access to the GPIO pins on the AMD CS5535 and - CS5536 Geode companion devices. - - If compiled as a module, it will be called cs5535_gpio. diff --git a/drivers/staging/cs5535_gpio/Makefile b/drivers/staging/cs5535_gpio/Makefile deleted file mode 100644 index d67c4b8..0000000 --- a/drivers/staging/cs5535_gpio/Makefile +++ /dev/null @@ -1 +0,0 @@ -obj-$(CONFIG_CS5535_GPIO) += cs5535_gpio.o diff --git a/drivers/staging/cs5535_gpio/TODO b/drivers/staging/cs5535_gpio/TODO deleted file mode 100644 index 98d1cd1..0000000 --- a/drivers/staging/cs5535_gpio/TODO +++ /dev/null @@ -1,6 +0,0 @@ -This is an obsolete driver for some the CS5535 and CS5536 southbridge GPIOs. -It has been replaced by a driver that makes use of the Linux GPIO subsystem. -Please switch to that driver, and let dilinger@queued.net know if there's -anything missing from the new driver. - -This driver is scheduled for removal in 2.6.40. diff --git a/drivers/staging/cs5535_gpio/cs5535_gpio.c b/drivers/staging/cs5535_gpio/cs5535_gpio.c deleted file mode 100644 index b25f9d1..0000000 --- a/drivers/staging/cs5535_gpio/cs5535_gpio.c +++ /dev/null @@ -1,260 +0,0 @@ -/* - * AMD CS5535/CS5536 GPIO driver. - * Allows a user space process to play with the GPIO pins. - * - * Copyright (c) 2005 Ben Gardner <bgardner@wabtec.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the smems of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - */ - -#include <linux/fs.h> -#include <linux/module.h> -#include <linux/errno.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/cdev.h> -#include <linux/ioport.h> -#include <linux/pci.h> - -#include <asm/uaccess.h> -#include <asm/io.h> - - -#define NAME "cs5535_gpio" - -MODULE_AUTHOR("Ben Gardner <bgardner@wabtec.com>"); -MODULE_DESCRIPTION("AMD CS5535/CS5536 GPIO Pin Driver"); -MODULE_LICENSE("GPL"); - -static int major; -module_param(major, int, 0); -MODULE_PARM_DESC(major, "Major device number"); - -static ulong mask; -module_param(mask, ulong, 0); -MODULE_PARM_DESC(mask, "GPIO channel mask"); - -#define MSR_LBAR_GPIO 0x5140000C - -static u32 gpio_base; - -static struct pci_device_id divil_pci[] = { - { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_CS5535_ISA) }, - { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA) }, - { } /* NULL entry */ -}; -MODULE_DEVICE_TABLE(pci, divil_pci); - -static struct cdev cs5535_gpio_cdev; - -/* reserve 32 entries even though some aren't usable */ -#define CS5535_GPIO_COUNT 32 - -/* IO block size */ -#define CS5535_GPIO_SIZE 256 - -struct gpio_regmap { - u32 rd_offset; - u32 wr_offset; - char on; - char off; -}; -static struct gpio_regmap rm[] = -{ - { 0x30, 0x00, '1', '0' }, /* GPIOx_READ_BACK / GPIOx_OUT_VAL */ - { 0x20, 0x20, 'I', 'i' }, /* GPIOx_IN_EN */ - { 0x04, 0x04, 'O', 'o' }, /* GPIOx_OUT_EN */ - { 0x08, 0x08, 't', 'T' }, /* GPIOx_OUT_OD_EN */ - { 0x18, 0x18, 'P', 'p' }, /* GPIOx_OUT_PU_EN */ - { 0x1c, 0x1c, 'D', 'd' }, /* GPIOx_OUT_PD_EN */ -}; - - -/** - * Gets the register offset for the GPIO bank. - * Low (0-15) starts at 0x00, high (16-31) starts at 0x80 - */ -static inline u32 cs5535_lowhigh_base(int reg) -{ - return (reg & 0x10) << 3; -} - -static ssize_t cs5535_gpio_write(struct file *file, const char __user *data, - size_t len, loff_t *ppos) -{ - u32 m = iminor(file->f_path.dentry->d_inode); - int i, j; - u32 base = gpio_base + cs5535_lowhigh_base(m); - u32 m0, m1; - char c; - - /** - * Creates the mask for atomic bit programming. - * The high 16 bits and the low 16 bits are used to set the mask. - * For example, GPIO 15 maps to 31,15: 0,1 => On; 1,0=> Off - */ - m1 = 1 << (m & 0x0F); - m0 = m1 << 16; - - for (i = 0; i < len; ++i) { - if (get_user(c, data+i)) - return -EFAULT; - - for (j = 0; j < ARRAY_SIZE(rm); j++) { - if (c == rm[j].on) { - outl(m1, base + rm[j].wr_offset); - /* If enabling output, turn off AUX 1 and AUX 2 */ - if (c == 'O') { - outl(m0, base + 0x10); - outl(m0, base + 0x14); - } - break; - } else if (c == rm[j].off) { - outl(m0, base + rm[j].wr_offset); - break; - } - } - } - *ppos = 0; - return len; -} - -static ssize_t cs5535_gpio_read(struct file *file, char __user *buf, - size_t len, loff_t *ppos) -{ - u32 m = iminor(file->f_path.dentry->d_inode); - u32 base = gpio_base + cs5535_lowhigh_base(m); - int rd_bit = 1 << (m & 0x0f); - int i; - char ch; - ssize_t count = 0; - - if (*ppos >= ARRAY_SIZE(rm)) - return 0; - - for (i = *ppos; (i < (*ppos + len)) && (i < ARRAY_SIZE(rm)); i++) { - ch = (inl(base + rm[i].rd_offset) & rd_bit) ? - rm[i].on : rm[i].off; - - if (put_user(ch, buf+count)) - return -EFAULT; - - count++; - } - - /* add a line-feed if there is room */ - if ((i == ARRAY_SIZE(rm)) && (count < len)) { - if (put_user('\n', buf + count)) - return -EFAULT; - count++; - } - - *ppos += count; - return count; -} - -static int cs5535_gpio_open(struct inode *inode, struct file *file) -{ - u32 m = iminor(inode); - - /* the mask says which pins are usable by this driver */ - if ((mask & (1 << m)) == 0) - return -EINVAL; - - return nonseekable_open(inode, file); -} - -static const struct file_operations cs5535_gpio_fops = { - .owner = THIS_MODULE, - .write = cs5535_gpio_write, - .read = cs5535_gpio_read, - .open = cs5535_gpio_open, - .llseek = no_llseek, -}; - -static int __init cs5535_gpio_init(void) -{ - dev_t dev_id; - u32 low, hi; - int retval; - - if (pci_dev_present(divil_pci) == 0) { - printk(KERN_WARNING NAME ": DIVIL not found\n"); - return -ENODEV; - } - - /* Grab the GPIO I/O range */ - rdmsr(MSR_LBAR_GPIO, low, hi); - - /* Check the mask and whether GPIO is enabled (sanity check) */ - if (hi != 0x0000f001) { - printk(KERN_WARNING NAME ": GPIO not enabled\n"); - return -ENODEV; - } - - /* Mask off the IO base address */ - gpio_base = low & 0x0000ff00; - - /** - * Some GPIO pins - * 31-29,23 : reserved (always mask out) - * 28 : Power Button - * 26 : PME# - * 22-16 : LPC - * 14,15 : SMBus - * 9,8 : UART1 - * 7 : PCI INTB - * 3,4 : UART2/DDC - * 2 : IDE_IRQ0 - * 0 : PCI INTA - * - * If a mask was not specified, be conservative and only allow: - * 1,2,5,6,10-13,24,25,27 - */ - if (mask != 0) - mask &= 0x1f7fffff; - else - mask = 0x0b003c66; - - if (!request_region(gpio_base, CS5535_GPIO_SIZE, NAME)) { - printk(KERN_ERR NAME ": can't allocate I/O for GPIO\n"); - return -ENODEV; - } - - if (major) { - dev_id = MKDEV(major, 0); - retval = register_chrdev_region(dev_id, CS5535_GPIO_COUNT, - NAME); - } else { - retval = alloc_chrdev_region(&dev_id, 0, CS5535_GPIO_COUNT, - NAME); - major = MAJOR(dev_id); - } - - if (retval) { - release_region(gpio_base, CS5535_GPIO_SIZE); - return -1; - } - - printk(KERN_DEBUG NAME ": base=%#x mask=%#lx major=%d\n", - gpio_base, mask, major); - - cdev_init(&cs5535_gpio_cdev, &cs5535_gpio_fops); - cdev_add(&cs5535_gpio_cdev, dev_id, CS5535_GPIO_COUNT); - - return 0; -} - -static void __exit cs5535_gpio_cleanup(void) -{ - dev_t dev_id = MKDEV(major, 0); - - cdev_del(&cs5535_gpio_cdev); - unregister_chrdev_region(dev_id, CS5535_GPIO_COUNT); - release_region(gpio_base, CS5535_GPIO_SIZE); -} - -module_init(cs5535_gpio_init); -module_exit(cs5535_gpio_cleanup); |