summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/acpi/enumeration.txt26
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio-bcm-kona.txt52
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt71
-rw-r--r--MAINTAINERS6
-rw-r--r--arch/arm/Kconfig7
-rw-r--r--arch/arm/include/asm/hardware/iop3xx-gpio.h75
-rw-r--r--arch/arm/include/asm/hardware/iop3xx.h12
-rw-r--r--arch/arm/mach-gemini/gpio.c2
-rw-r--r--arch/arm/mach-gemini/include/mach/gpio.h20
-rw-r--r--arch/arm/mach-iop32x/em7210.c2
-rw-r--r--arch/arm/mach-iop32x/glantank.c2
-rw-r--r--arch/arm/mach-iop32x/gpio-iop32x.h10
-rw-r--r--arch/arm/mach-iop32x/include/mach/gpio.h6
-rw-r--r--arch/arm/mach-iop32x/include/mach/iop32x.h1
-rw-r--r--arch/arm/mach-iop32x/iq31244.c2
-rw-r--r--arch/arm/mach-iop32x/iq80321.c2
-rw-r--r--arch/arm/mach-iop32x/n2100.c47
-rw-r--r--arch/arm/mach-iop33x/include/mach/gpio.h6
-rw-r--r--arch/arm/mach-iop33x/include/mach/iop33x.h1
-rw-r--r--arch/arm/mach-iop33x/iq80331.c7
-rw-r--r--arch/arm/mach-iop33x/iq80332.c7
-rw-r--r--arch/arm/mach-ixp4xx/common.c49
-rw-r--r--arch/arm/mach-ixp4xx/dsmg600-setup.c65
-rw-r--r--arch/arm/mach-ixp4xx/include/mach/platform.h39
-rw-r--r--arch/arm/mach-ixp4xx/ixdp425-setup.c8
-rw-r--r--arch/arm/mach-ixp4xx/nas100d-setup.c49
-rw-r--r--arch/arm/mach-ixp4xx/nslu2-setup.c17
-rw-r--r--arch/arm/mach-mmp/include/mach/gpio.h8
-rw-r--r--arch/arm/mach-pxa/include/mach/gpio.h32
-rw-r--r--arch/arm/mach-w90x900/include/mach/gpio.h30
-rw-r--r--arch/arm/plat-iop/Makefile2
-rw-r--r--drivers/gpio/Kconfig35
-rw-r--r--drivers/gpio/Makefile4
-rw-r--r--drivers/gpio/devres.c85
-rw-r--r--drivers/gpio/gpio-74x164.c5
-rw-r--r--drivers/gpio/gpio-adnp.c8
-rw-r--r--drivers/gpio/gpio-arizona.c4
-rw-r--r--drivers/gpio/gpio-bcm-kona.c640
-rw-r--r--drivers/gpio/gpio-bt8xx.c2
-rw-r--r--drivers/gpio/gpio-clps711x.c2
-rw-r--r--drivers/gpio/gpio-em.c13
-rw-r--r--drivers/gpio/gpio-ep93xx.c18
-rw-r--r--drivers/gpio/gpio-intel-mid.c471
-rw-r--r--drivers/gpio/gpio-iop.c (renamed from arch/arm/plat-iop/gpio.c)67
-rw-r--r--drivers/gpio/gpio-langwell.c397
-rw-r--r--drivers/gpio/gpio-lpc32xx.c1
-rw-r--r--drivers/gpio/gpio-lynxpoint.c19
-rw-r--r--drivers/gpio/gpio-mc33880.c3
-rw-r--r--drivers/gpio/gpio-mpc8xxx.c8
-rw-r--r--drivers/gpio/gpio-mxs.c32
-rw-r--r--drivers/gpio/gpio-omap.c20
-rw-r--r--drivers/gpio/gpio-palmas.c104
-rw-r--r--drivers/gpio/gpio-pca953x.c11
-rw-r--r--drivers/gpio/gpio-pcf857x.c105
-rw-r--r--drivers/gpio/gpio-pl061.c10
-rw-r--r--drivers/gpio/gpio-rcar.c13
-rw-r--r--drivers/gpio/gpio-stmpe.c25
-rw-r--r--drivers/gpio/gpio-tc3589x.c36
-rw-r--r--drivers/gpio/gpio-tegra.c18
-rw-r--r--drivers/gpio/gpio-twl4030.c2
-rw-r--r--drivers/gpio/gpiolib-acpi.c138
-rw-r--r--drivers/gpio/gpiolib-of.c28
-rw-r--r--drivers/gpio/gpiolib.c828
-rw-r--r--drivers/input/misc/ixp4xx-beeper.c25
-rw-r--r--drivers/pinctrl/pinctrl-coh901.c5
-rw-r--r--drivers/pinctrl/pinctrl-nomadik.c5
-rw-r--r--drivers/ptp/ptp_ixp46x.c9
-rw-r--r--drivers/staging/media/lirc/lirc_serial.c16
-rw-r--r--include/asm-generic/gpio.h225
-rw-r--r--include/linux/acpi_gpio.h31
-rw-r--r--include/linux/gpio.h57
-rw-r--r--include/linux/gpio/consumer.h253
-rw-r--r--include/linux/gpio/driver.h184
-rw-r--r--include/linux/of_gpio.h29
74 files changed, 3199 insertions, 1455 deletions
diff --git a/Documentation/acpi/enumeration.txt b/Documentation/acpi/enumeration.txt
index aca4e69..b994bcb 100644
--- a/Documentation/acpi/enumeration.txt
+++ b/Documentation/acpi/enumeration.txt
@@ -295,10 +295,6 @@ These GPIO numbers are controller relative and path "\\_SB.PCI0.GPI0"
specifies the path to the controller. In order to use these GPIOs in Linux
we need to translate them to the Linux GPIO numbers.
-The driver can do this by including <linux/acpi_gpio.h> and then calling
-acpi_get_gpio(path, gpio). This will return the Linux GPIO number or
-negative errno if there was no translation found.
-
In a simple case of just getting the Linux GPIO number from device
resources one can use acpi_get_gpio_by_index() helper function. It takes
pointer to the device and index of the GpioIo/GpioInt descriptor in the
@@ -322,3 +318,25 @@ suitable to the gpiolib before passing them.
In case of GpioInt resource an additional call to gpio_to_irq() must be
done before calling request_irq().
+
+Note that the above API is ACPI specific and not recommended for drivers
+that need to support non-ACPI systems. The recommended way is to use
+the descriptor based GPIO interfaces. The above example looks like this
+when converted to the GPIO desc:
+
+ #include <linux/gpio/consumer.h>
+ ...
+
+ struct gpio_desc *irq_desc, *power_desc;
+
+ irq_desc = gpiod_get_index(dev, NULL, 1);
+ if (IS_ERR(irq_desc))
+ /* handle error */
+
+ power_desc = gpiod_get_index(dev, NULL, 0);
+ if (IS_ERR(power_desc))
+ /* handle error */
+
+ /* Now we can use the GPIO descriptors */
+
+See also Documentation/gpio.txt.
diff --git a/Documentation/devicetree/bindings/gpio/gpio-bcm-kona.txt b/Documentation/devicetree/bindings/gpio/gpio-bcm-kona.txt
new file mode 100644
index 0000000..4a63bc9
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-bcm-kona.txt
@@ -0,0 +1,52 @@
+Broadcom Kona Family GPIO
+=========================
+
+This GPIO driver is used in the following Broadcom SoCs:
+ BCM11130, BCM11140, BCM11351, BCM28145, BCM28155
+
+The Broadcom GPIO Controller IP can be configured prior to synthesis to
+support up to 8 banks of 32 GPIOs where each bank has its own IRQ. The
+GPIO controller only supports edge, not level, triggering of interrupts.
+
+Required properties
+-------------------
+
+- compatible: "brcm,bcm11351-gpio", "brcm,kona-gpio"
+- reg: Physical base address and length of the controller's registers.
+- interrupts: The interrupt outputs from the controller. There is one GPIO
+ interrupt per GPIO bank. The number of interrupts listed depends on the
+ number of GPIO banks on the SoC. The interrupts must be ordered by bank,
+ starting with bank 0. There is always a 1:1 mapping between banks and
+ IRQs.
+- #gpio-cells: Should be <2>. The first cell is the pin number, the second
+ cell is used to specify optional parameters:
+ - bit 0 specifies polarity (0 for normal, 1 for inverted)
+ See also "gpio-specifier" in .../devicetree/bindings/gpio/gpio.txt.
+- #interrupt-cells: Should be <2>. The first cell is the GPIO number. The
+ second cell is used to specify flags. The following subset of flags is
+ supported:
+ - trigger type (bits[1:0]):
+ 1 = low-to-high edge triggered.
+ 2 = high-to-low edge triggered.
+ 3 = low-to-high or high-to-low edge triggered
+ Valid values are 1, 2, 3
+ See also .../devicetree/bindings/interrupt-controller/interrupts.txt.
+- gpio-controller: Marks the device node as a GPIO controller.
+- interrupt-controller: Marks the device node as an interrupt controller.
+
+Example:
+ gpio: gpio@35003000 {
+ compatible = "brcm,bcm11351-gpio", "brcm,kona-gpio";
+ reg = <0x35003000 0x800>;
+ interrupts =
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt b/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
new file mode 100644
index 0000000..d63194a
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
@@ -0,0 +1,71 @@
+* PCF857x-compatible I/O expanders
+
+The PCF857x-compatible chips have "quasi-bidirectional" I/O lines that can be
+driven high by a pull-up current source or driven low to ground. This combines
+the direction and output level into a single bit per line, which can't be read
+back. We can't actually know at initialization time whether a line is configured
+(a) as output and driving the signal low/high, or (b) as input and reporting a
+low/high value, without knowing the last value written since the chip came out
+of reset (if any). The only reliable solution for setting up line direction is
+thus to do it explicitly.
+
+Required Properties:
+
+ - compatible: should be one of the following.
+ - "maxim,max7328": For the Maxim MAX7378
+ - "maxim,max7329": For the Maxim MAX7329
+ - "nxp,pca8574": For the NXP PCA8574
+ - "nxp,pca8575": For the NXP PCA8575
+ - "nxp,pca9670": For the NXP PCA9670
+ - "nxp,pca9671": For the NXP PCA9671
+ - "nxp,pca9672": For the NXP PCA9672
+ - "nxp,pca9673": For the NXP PCA9673
+ - "nxp,pca9674": For the NXP PCA9674
+ - "nxp,pca9675": For the NXP PCA9675
+ - "nxp,pcf8574": For the NXP PCF8574
+ - "nxp,pcf8574a": For the NXP PCF8574A
+ - "nxp,pcf8575": For the NXP PCF8575
+ - "ti,tca9554": For the TI TCA9554
+
+ - reg: I2C slave address.
+
+ - gpio-controller: Marks the device node as a gpio controller.
+ - #gpio-cells: Should be 2. The first cell is the GPIO number and the second
+ cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>. Only the
+ GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported.
+
+Optional Properties:
+
+ - lines-initial-states: Bitmask that specifies the initial state of each
+ line. When a bit is set to zero, the corresponding line will be initialized to
+ the input (pulled-up) state. When the bit is set to one, the line will be
+ initialized the the low-level output state. If the property is not specified
+ all lines will be initialized to the input state.
+
+ The I/O expander can detect input state changes, and thus optionally act as
+ an interrupt controller. When the expander interrupt line is connected all the
+ following properties must be set. For more information please see the
+ interrupt controller device tree bindings documentation available at
+ Documentation/devicetree/bindings/interrupt-controller/interrupts.txt.
+
+ - interrupt-controller: Identifies the node as an interrupt controller.
+ - #interrupt-cells: Number of cells to encode an interrupt source, shall be 2.
+ - interrupt-parent: phandle of the parent interrupt controller.
+ - interrupts: Interrupt specifier for the controllers interrupt.
+
+
+Please refer to gpio.txt in this directory for details of the common GPIO
+bindings used by client devices.
+
+Example: PCF8575 I/O expander node
+
+ pcf8575: gpio@20 {
+ compatible = "nxp,pcf8575";
+ reg = <0x20>;
+ interrupt-parent = <&irqpin2>;
+ interrupts = <3 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 197e2b6..051e4dc 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4440,6 +4440,12 @@ F: Documentation/networking/ixgbevf.txt
F: Documentation/networking/i40e.txt
F: drivers/net/ethernet/intel/
+INTEL-MID GPIO DRIVER
+M: David Cohen <david.a.cohen@linux.intel.com>
+L: linux-gpio@vger.kernel.org
+S: Maintained
+F: drivers/gpio/gpio-intel-mid.c
+
INTEL PRO/WIRELESS 2100, 2200BG, 2915ABG NETWORK CONNECTION SUPPORT
M: Stanislav Yakovlev <stas.yakovlev@gmail.com>
L: linux-wireless@vger.kernel.org
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index aa83003..acb8070 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -389,7 +389,6 @@ config ARCH_GEMINI
select CLKSRC_MMIO
select CPU_FA526
select GENERIC_CLOCKEVENTS
- select NEED_MACH_GPIO_H
help
Support for the Cortina Systems Gemini family SoCs
@@ -458,7 +457,7 @@ config ARCH_IOP32X
depends on MMU
select ARCH_REQUIRE_GPIOLIB
select CPU_XSCALE
- select NEED_MACH_GPIO_H
+ select GPIO_IOP
select NEED_RET_TO_USER
select PCI
select PLAT_IOP
@@ -471,7 +470,7 @@ config ARCH_IOP33X
depends on MMU
select ARCH_REQUIRE_GPIOLIB
select CPU_XSCALE
- select NEED_MACH_GPIO_H
+ select GPIO_IOP
select NEED_RET_TO_USER
select PCI
select PLAT_IOP
@@ -560,7 +559,6 @@ config ARCH_MMP
select GPIO_PXA
select IRQ_DOMAIN
select MULTI_IRQ_HANDLER
- select NEED_MACH_GPIO_H
select PINCTRL
select PLAT_PXA
select SPARSE_IRQ
@@ -623,7 +621,6 @@ config ARCH_PXA
select GPIO_PXA
select HAVE_IDE
select MULTI_IRQ_HANDLER
- select NEED_MACH_GPIO_H
select PLAT_PXA
select SPARSE_IRQ
help
diff --git a/arch/arm/include/asm/hardware/iop3xx-gpio.h b/arch/arm/include/asm/hardware/iop3xx-gpio.h
deleted file mode 100644
index 9eda7dc..0000000
--- a/arch/arm/include/asm/hardware/iop3xx-gpio.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * arch/arm/include/asm/hardware/iop3xx-gpio.h
- *
- * IOP3xx GPIO wrappers
- *
- * Copyright (c) 2008 Arnaud Patard <arnaud.patard@rtp-net.org>
- * Based on IXP4XX gpio.h file
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARM_HARDWARE_IOP3XX_GPIO_H
-#define __ASM_ARM_HARDWARE_IOP3XX_GPIO_H
-
-#include <mach/hardware.h>
-#include <asm-generic/gpio.h>
-
-#define __ARM_GPIOLIB_COMPLEX
-
-#define IOP3XX_N_GPIOS 8
-
-static inline int gpio_get_value(unsigned gpio)
-{
- if (gpio > IOP3XX_N_GPIOS)
- return __gpio_get_value(gpio);
-
- return gpio_line_get(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- if (gpio > IOP3XX_N_GPIOS) {
- __gpio_set_value(gpio, value);
- return;
- }
- gpio_line_set(gpio, value);
-}
-
-static inline int gpio_cansleep(unsigned gpio)
-{
- if (gpio < IOP3XX_N_GPIOS)
- return 0;
- else
- return __gpio_cansleep(gpio);
-}
-
-/*
- * The GPIOs are not generating any interrupt
- * Note : manuals are not clear about this
- */
-static inline int gpio_to_irq(int gpio)
-{
- return -EINVAL;
-}
-
-static inline int irq_to_gpio(int gpio)
-{
- return -EINVAL;
-}
-
-#endif
-
diff --git a/arch/arm/include/asm/hardware/iop3xx.h b/arch/arm/include/asm/hardware/iop3xx.h
index 423744b..2594a95 100644
--- a/arch/arm/include/asm/hardware/iop3xx.h
+++ b/arch/arm/include/asm/hardware/iop3xx.h
@@ -18,16 +18,9 @@
/*
* IOP3XX GPIO handling
*/
-#define GPIO_IN 0
-#define GPIO_OUT 1
-#define GPIO_LOW 0
-#define GPIO_HIGH 1
#define IOP3XX_GPIO_LINE(x) (x)
#ifndef __ASSEMBLY__
-extern void gpio_line_config(int line, int direction);
-extern int gpio_line_get(int line);
-extern void gpio_line_set(int line, int value);
extern int init_atu;
extern int iop3xx_get_init_atu(void);
#endif
@@ -168,11 +161,6 @@ extern int iop3xx_get_init_atu(void);
/* PERCR0 DOESN'T EXIST - index from 1! */
#define IOP3XX_PERCR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0710)
-/* General Purpose I/O */
-#define IOP3XX_GPOE (volatile u32 *)IOP3XX_GPIO_REG(0x0000)
-#define IOP3XX_GPID (volatile u32 *)IOP3XX_GPIO_REG(0x0004)
-#define IOP3XX_GPOD (volatile u32 *)IOP3XX_GPIO_REG(0x0008)
-
/* Timers */
#define IOP3XX_TU_TMR0 (volatile u32 *)IOP3XX_TIMER_REG(0x0000)
#define IOP3XX_TU_TMR1 (volatile u32 *)IOP3XX_TIMER_REG(0x0004)
diff --git a/arch/arm/mach-gemini/gpio.c b/arch/arm/mach-gemini/gpio.c
index 70bfa57..f8cb571 100644
--- a/arch/arm/mach-gemini/gpio.c
+++ b/arch/arm/mach-gemini/gpio.c
@@ -21,9 +21,9 @@
#include <mach/hardware.h>
#include <mach/irqs.h>
-#include <mach/gpio.h>
#define GPIO_BASE(x) IO_ADDRESS(GEMINI_GPIO_BASE(x))
+#define irq_to_gpio(x) ((x) - GPIO_IRQ_BASE)
/* GPIO registers definition */
#define GPIO_DATA_OUT 0x0
diff --git a/arch/arm/mach-gemini/include/mach/gpio.h b/arch/arm/mach-gemini/include/mach/gpio.h
deleted file mode 100644
index 40a0527..0000000
--- a/arch/arm/mach-gemini/include/mach/gpio.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Gemini gpiolib specific defines
- *
- * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __MACH_GPIO_H__
-#define __MACH_GPIO_H__
-
-#include <mach/irqs.h>
-
-#define gpio_to_irq(x) ((x) + GPIO_IRQ_BASE)
-#define irq_to_gpio(x) ((x) - GPIO_IRQ_BASE)
-
-#endif /* __MACH_GPIO_H__ */
diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c
index 31fbb6c..177cd07 100644
--- a/arch/arm/mach-iop32x/em7210.c
+++ b/arch/arm/mach-iop32x/em7210.c
@@ -32,6 +32,7 @@
#include <asm/mach/time.h>
#include <asm/mach-types.h>
#include <mach/time.h>
+#include "gpio-iop32x.h"
static void __init em7210_timer_init(void)
{
@@ -183,6 +184,7 @@ void em7210_power_off(void)
static void __init em7210_init_machine(void)
{
+ register_iop32x_gpio();
platform_device_register(&em7210_serial_device);
platform_device_register(&iop3xx_i2c0_device);
platform_device_register(&iop3xx_i2c1_device);
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
index ac30470..547b234 100644
--- a/arch/arm/mach-iop32x/glantank.c
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -34,6 +34,7 @@
#include <asm/mach-types.h>
#include <asm/page.h>
#include <mach/time.h>
+#include "gpio-iop32x.h"
/*
* GLAN Tank timer tick configuration.
@@ -187,6 +188,7 @@ static void glantank_power_off(void)
static void __init glantank_init_machine(void)
{
+ register_iop32x_gpio();
platform_device_register(&iop3xx_i2c0_device);
platform_device_register(&iop3xx_i2c1_device);
platform_device_register(&glantank_flash_device);
diff --git a/arch/arm/mach-iop32x/gpio-iop32x.h b/arch/arm/mach-iop32x/gpio-iop32x.h
new file mode 100644
index 0000000..3c7309c
--- /dev/null
+++ b/arch/arm/mach-iop32x/gpio-iop32x.h
@@ -0,0 +1,10 @@
+static struct resource iop32x_gpio_res[] = {
+ DEFINE_RES_MEM((IOP3XX_PERIPHERAL_PHYS_BASE + 0x07c4), 0x10),
+};
+
+static inline void register_iop32x_gpio(void)
+{
+ platform_device_register_simple("gpio-iop", 0,
+ iop32x_gpio_res,
+ ARRAY_SIZE(iop32x_gpio_res));
+}
diff --git a/arch/arm/mach-iop32x/include/mach/gpio.h b/arch/arm/mach-iop32x/include/mach/gpio.h
deleted file mode 100644
index 708f4ec..0000000
--- a/arch/arm/mach-iop32x/include/mach/gpio.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_ARCH_IOP32X_GPIO_H
-#define __ASM_ARCH_IOP32X_GPIO_H
-
-#include <asm/hardware/iop3xx-gpio.h>
-
-#endif
diff --git a/arch/arm/mach-iop32x/include/mach/iop32x.h b/arch/arm/mach-iop32x/include/mach/iop32x.h
index 941f363..56ec864 100644
--- a/arch/arm/mach-iop32x/include/mach/iop32x.h
+++ b/arch/arm/mach-iop32x/include/mach/iop32x.h
@@ -19,7 +19,6 @@
* Peripherals that are shared between the iop32x and iop33x but
* located at different addresses.
*/
-#define IOP3XX_GPIO_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x07c4 + (reg))
#define IOP3XX_TIMER_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x07e0 + (reg))
#include <asm/hardware/iop3xx.h>
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
index f2cd296..0e1392b 100644
--- a/arch/arm/mach-iop32x/iq31244.c
+++ b/arch/arm/mach-iop32x/iq31244.c
@@ -37,6 +37,7 @@
#include <asm/page.h>
#include <asm/pgtable.h>
#include <mach/time.h>
+#include "gpio-iop32x.h"
/*
* Until March of 2007 iq31244 platforms and ep80219 platforms shared the
@@ -283,6 +284,7 @@ void ep80219_power_off(void)
static void __init iq31244_init_machine(void)
{
+ register_iop32x_gpio();
platform_device_register(&iop3xx_i2c0_device);
platform_device_register(&iop3xx_i2c1_device);
platform_device_register(&iq31244_flash_device);
diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c
index 015435d..66782ff 100644
--- a/arch/arm/mach-iop32x/iq80321.c
+++ b/arch/arm/mach-iop32x/iq80321.c
@@ -33,6 +33,7 @@
#include <asm/page.h>
#include <asm/pgtable.h>
#include <mach/time.h>
+#include "gpio-iop32x.h"
/*
* IQ80321 timer tick configuration.
@@ -170,6 +171,7 @@ static struct platform_device iq80321_serial_device = {
static void __init iq80321_init_machine(void)
{
+ register_iop32x_gpio();
platform_device_register(&iop3xx_i2c0_device);
platform_device_register(&iop3xx_i2c1_device);
platform_device_register(&iq80321_flash_device);
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index 0691443..c1cd80e 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -30,6 +30,7 @@
#include <linux/platform_device.h>
#include <linux/reboot.h>
#include <linux/io.h>
+#include <linux/gpio.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
@@ -40,6 +41,7 @@
#include <asm/page.h>
#include <asm/pgtable.h>
#include <mach/time.h>
+#include "gpio-iop32x.h"
/*
* N2100 timer tick configuration.
@@ -288,8 +290,14 @@ static void n2100_power_off(void)
static void n2100_restart(enum reboot_mode mode, const char *cmd)
{
- gpio_line_set(N2100_HARDWARE_RESET, GPIO_LOW);
- gpio_line_config(N2100_HARDWARE_RESET, GPIO_OUT);
+ int ret;
+
+ ret = gpio_direction_output(N2100_HARDWARE_RESET, 0);
+ if (ret) {
+ pr_crit("could not drive reset GPIO low\n");
+ return;
+ }
+ /* Wait for reset to happen */
while (1)
;
}
@@ -299,7 +307,7 @@ static struct timer_list power_button_poll_timer;
static void power_button_poll(unsigned long dummy)
{
- if (gpio_line_get(N2100_POWER_BUTTON) == 0) {
+ if (gpio_get_value(N2100_POWER_BUTTON) == 0) {
ctrl_alt_del();
return;
}
@@ -308,9 +316,37 @@ static void power_button_poll(unsigned long dummy)
add_timer(&power_button_poll_timer);
}
+static int __init n2100_request_gpios(void)
+{
+ int ret;
+
+ if (!machine_is_n2100())
+ return 0;
+
+ ret = gpio_request(N2100_HARDWARE_RESET, "reset");
+ if (ret)
+ pr_err("could not request reset GPIO\n");
+
+ ret = gpio_request(N2100_POWER_BUTTON, "power");
+ if (ret)
+ pr_err("could not request power GPIO\n");
+ else {
+ ret = gpio_direction_input(N2100_POWER_BUTTON);
+ if (ret)
+ pr_err("could not set power GPIO as input\n");
+ }
+ /* Set up power button poll timer */
+ init_timer(&power_button_poll_timer);
+ power_button_poll_timer.function = power_button_poll;
+ power_button_poll_timer.expires = jiffies + (HZ / 10);
+ add_timer(&power_button_poll_timer);
+ return 0;
+}
+device_initcall(n2100_request_gpios);
static void __init n2100_init_machine(void)
{
+ register_iop32x_gpio();
platform_device_register(&iop3xx_i2c0_device);
platform_device_register(&n2100_flash_device);
platform_device_register(&n2100_serial_device);
@@ -321,11 +357,6 @@ static void __init n2100_init_machine(void)
ARRAY_SIZE(n2100_i2c_devices));
pm_power_off = n2100_power_off;
-
- init_timer(&power_button_poll_timer);
- power_button_poll_timer.function = power_button_poll;
- power_button_poll_timer.expires = jiffies + (HZ / 10);
- add_timer(&power_button_poll_timer);
}
MACHINE_START(N2100, "Thecus N2100")
diff --git a/arch/arm/mach-iop33x/include/mach/gpio.h b/arch/arm/mach-iop33x/include/mach/gpio.h
deleted file mode 100644
index ddd55bb..0000000
--- a/arch/arm/mach-iop33x/include/mach/gpio.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_ARCH_IOP33X_GPIO_H
-#define __ASM_ARCH_IOP33X_GPIO_H
-
-#include <asm/hardware/iop3xx-gpio.h>
-
-#endif
diff --git a/arch/arm/mach-iop33x/include/mach/iop33x.h b/arch/arm/mach-iop33x/include/mach/iop33x.h
index a89c0a2..c951226 100644
--- a/arch/arm/mach-iop33x/include/mach/iop33x.h
+++ b/arch/arm/mach-iop33x/include/mach/iop33x.h
@@ -18,7 +18,6 @@
* Peripherals that are shared between the iop32x and iop33x but
* located at different addresses.
*/
-#define IOP3XX_GPIO_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x1780 + (reg))
#define IOP3XX_TIMER_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x07d0 + (reg))
#include <asm/hardware/iop3xx.h>
diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c
index c43304a..e2cb65c 100644
--- a/arch/arm/mach-iop33x/iq80331.c
+++ b/arch/arm/mach-iop33x/iq80331.c
@@ -122,8 +122,15 @@ static struct platform_device iq80331_flash_device = {
.resource = &iq80331_flash_resource,
};
+static struct resource iq80331_gpio_res[] = {
+ DEFINE_RES_MEM((IOP3XX_PERIPHERAL_PHYS_BASE + 0x1780), 0x10),
+};
+
static void __init iq80331_init_machine(void)
{
+ platform_device_register_simple("gpio-iop", 0,
+ iq80331_gpio_res,
+ ARRAY_SIZE(iq80331_gpio_res));
platform_device_register(&iop3xx_i2c0_device);
platform_device_register(&iop3xx_i2c1_device);
platform_device_register(&iop33x_uart0_device);
diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c
index 8192987..0b6269d 100644
--- a/arch/arm/mach-iop33x/iq80332.c
+++ b/arch/arm/mach-iop33x/iq80332.c
@@ -122,8 +122,15 @@ static struct platform_device iq80332_flash_device = {
.resource = &iq80332_flash_resource,
};
+static struct resource iq80332_gpio_res[] = {
+ DEFINE_RES_MEM((IOP3XX_PERIPHERAL_PHYS_BASE + 0x1780), 0x10),
+};
+
static void __init iq80332_init_machine(void)
{
+ platform_device_register_simple("gpio-iop", 0,
+ iq80332_gpio_res,
+ ARRAY_SIZE(iq80332_gpio_res));
platform_device_register(&iop3xx_i2c0_device);
platform_device_register(&iop3xx_i2c1_device);
platform_device_register(&iop33x_uart0_device);
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 5327dec..9edaf47 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -81,6 +81,44 @@ void __init ixp4xx_map_io(void)
iotable_init(ixp4xx_io_desc, ARRAY_SIZE(ixp4xx_io_desc));
}
+/*
+ * GPIO-functions
+ */
+/*
+ * The following converted to the real HW bits the gpio_line_config
+ */
+/* GPIO pin types */
+#define IXP4XX_GPIO_OUT 0x1
+#define IXP4XX_GPIO_IN 0x2
+
+/* GPIO signal types */
+#define IXP4XX_GPIO_LOW 0
+#define IXP4XX_GPIO_HIGH 1
+
+/* GPIO Clocks */
+#define IXP4XX_GPIO_CLK_0 14
+#define IXP4XX_GPIO_CLK_1 15
+
+static void gpio_line_config(u8 line, u32 direction)
+{
+ if (direction == IXP4XX_GPIO_IN)
+ *IXP4XX_GPIO_GPOER |= (1 << line);
+ else
+ *IXP4XX_GPIO_GPOER &= ~(1 << line);
+}
+
+static void gpio_line_get(u8 line, int *value)
+{
+ *value = (*IXP4XX_GPIO_GPINR >> line) & 0x1;
+}
+
+static void gpio_line_set(u8 line, int value)
+{
+ if (value == IXP4XX_GPIO_HIGH)
+ *IXP4XX_GPIO_GPOUTR |= (1 << line);
+ else if (value == IXP4XX_GPIO_LOW)
+ *IXP4XX_GPIO_GPOUTR &= ~(1 << line);
+}
/*************************************************************************
* IXP4xx chipset IRQ handling
@@ -117,17 +155,6 @@ static int ixp4xx_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
return -EINVAL;
}
-int irq_to_gpio(unsigned int irq)
-{
- int gpio = (irq < 32) ? irq2gpio[irq] : -EINVAL;
-
- if (gpio == -1)
- return -EINVAL;
-
- return gpio;
-}
-EXPORT_SYMBOL(irq_to_gpio);
-
static int ixp4xx_set_irq_type(struct irq_data *d, unsigned int type)
{
int line = irq2gpio[d->irq];
diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c
index 63de1b3..736dc69 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c
@@ -26,6 +26,7 @@
#include <linux/reboot.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
+#include <linux/gpio.h>
#include <mach/hardware.h>
@@ -161,11 +162,8 @@ static struct platform_device *dsmg600_devices[] __initdata = {
static void dsmg600_power_off(void)
{
- /* enable the pwr cntl gpio */
- gpio_line_config(DSMG600_PO_GPIO, IXP4XX_GPIO_OUT);
-
- /* poweroff */
- gpio_line_set(DSMG600_PO_GPIO, IXP4XX_GPIO_HIGH);
+ /* enable the pwr cntl and drive it high */
+ gpio_direction_output(DSMG600_PO_GPIO, 1);
}
/* This is used to make sure the power-button pusher is serious. The button
@@ -202,7 +200,7 @@ static void dsmg600_power_handler(unsigned long data)
ctrl_alt_del();
/* Change the state of the power LED to "blink" */
- gpio_line_set(DSMG600_LED_PWR_GPIO, IXP4XX_GPIO_LOW);
+ gpio_set_value(DSMG600_LED_PWR_GPIO, 0);
} else {
power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
}
@@ -228,6 +226,40 @@ static void __init dsmg600_timer_init(void)
ixp4xx_timer_init();
}
+static int __init dsmg600_gpio_init(void)
+{
+ if (!machine_is_dsmg600())
+ return 0;
+
+ gpio_request(DSMG600_RB_GPIO, "reset button");
+ if (request_irq(gpio_to_irq(DSMG600_RB_GPIO), &dsmg600_reset_handler,
+ IRQF_DISABLED | IRQF_TRIGGER_LOW,
+ "DSM-G600 reset button", NULL) < 0) {
+
+ printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
+ gpio_to_irq(DSMG600_RB_GPIO));
+ }
+
+ /*
+ * The power button on the D-Link DSM-G600 is on GPIO 15, but
+ * it cannot handle interrupts on that GPIO line. So we'll
+ * have to poll it with a kernel timer.
+ */
+
+ /* Make sure that the power button GPIO is set up as an input */
+ gpio_request(DSMG600_PB_GPIO, "power button");
+ gpio_direction_input(DSMG600_PB_GPIO);
+ /* Request poweroff GPIO line */
+ gpio_request(DSMG600_PO_GPIO, "power off button");
+
+ /* Set the initial value for the power button IRQ handler */
+ power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
+
+ mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));
+ return 0;
+}
+device_initcall(dsmg600_gpio_init);
+
static void __init dsmg600_init(void)
{
ixp4xx_sys_init();
@@ -251,27 +283,6 @@ static void __init dsmg600_init(void)
platform_add_devices(dsmg600_devices, ARRAY_SIZE(dsmg600_devices));
pm_power_off = dsmg600_power_off;
-
- if (request_irq(gpio_to_irq(DSMG600_RB_GPIO), &dsmg600_reset_handler,
- IRQF_DISABLED | IRQF_TRIGGER_LOW,
- "DSM-G600 reset button", NULL) < 0) {
-
- printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
- gpio_to_irq(DSMG600_RB_GPIO));
- }
-
- /* The power button on the D-Link DSM-G600 is on GPIO 15, but
- * it cannot handle interrupts on that GPIO line. So we'll
- * have to poll it with a kernel timer.
- */
-
- /* Make sure that the power button GPIO is set up as an input */
- gpio_line_config(DSMG600_PB_GPIO, IXP4XX_GPIO_IN);
-
- /* Set the initial value for the power button IRQ handler */
- power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
-
- mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));
}
MACHINE_START(DSMG600, "D-Link DSM-G600 RevA")
diff --git a/arch/arm/mach-ixp4xx/include/mach/platform.h b/arch/arm/mach-ixp4xx/include/mach/platform.h
index 4c4c6a6..75c4c65 100644
--- a/arch/arm/mach-ixp4xx/include/mach/platform.h
+++ b/arch/arm/mach-ixp4xx/include/mach/platform.h
@@ -131,44 +131,5 @@ struct pci_sys_data;
extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
extern struct pci_ops ixp4xx_ops;
-/*
- * GPIO-functions
- */
-/*
- * The following converted to the real HW bits the gpio_line_config
- */
-/* GPIO pin types */
-#define IXP4XX_GPIO_OUT 0x1
-#define IXP4XX_GPIO_IN 0x2
-
-/* GPIO signal types */
-#define IXP4XX_GPIO_LOW 0
-#define IXP4XX_GPIO_HIGH 1
-
-/* GPIO Clocks */
-#define IXP4XX_GPIO_CLK_0 14
-#define IXP4XX_GPIO_CLK_1 15
-
-static inline void gpio_line_config(u8 line, u32 direction)
-{
- if (direction == IXP4XX_GPIO_IN)
- *IXP4XX_GPIO_GPOER |= (1 << line);
- else
- *IXP4XX_GPIO_GPOER &= ~(1 << line);
-}
-
-static inline void gpio_line_get(u8 line, int *value)
-{
- *value = (*IXP4XX_GPIO_GPINR >> line) & 0x1;
-}
-
-static inline void gpio_line_set(u8 line, int value)
-{
- if (value == IXP4XX_GPIO_HIGH)
- *IXP4XX_GPIO_GPOUTR |= (1 << line);
- else if (value == IXP4XX_GPIO_LOW)
- *IXP4XX_GPIO_GPOUTR &= ~(1 << line);
-}
-
#endif // __ASSEMBLY__
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index 22d688b..e7b8bef 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -20,6 +20,7 @@
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/delay.h>
+#include <linux/gpio.h>
#include <asm/types.h>
#include <asm/setup.h>
#include <asm/memory.h>
@@ -80,10 +81,10 @@ ixdp425_flash_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
if (ctrl & NAND_CTRL_CHANGE) {
if (ctrl & NAND_NCE) {
- gpio_line_set(IXDP425_NAND_NCE_PIN, IXP4XX_GPIO_LOW);
+ gpio_set_value(IXDP425_NAND_NCE_PIN, 0);
udelay(5);
} else
- gpio_line_set(IXDP425_NAND_NCE_PIN, IXP4XX_GPIO_HIGH);
+ gpio_set_value(IXDP425_NAND_NCE_PIN, 1);
offset = (ctrl & NAND_CLE) ? IXDP425_NAND_CMD_BYTE : 0;
offset |= (ctrl & NAND_ALE) ? IXDP425_NAND_ADDR_BYTE : 0;
@@ -227,7 +228,8 @@ static void __init ixdp425_init(void)
ixdp425_flash_nand_resource.start = IXP4XX_EXP_BUS_BASE(3),
ixdp425_flash_nand_resource.end = IXP4XX_EXP_BUS_BASE(3) + 0x10 - 1;
- gpio_line_config(IXDP425_NAND_NCE_PIN, IXP4XX_GPIO_OUT);
+ gpio_request(IXDP425_NAND_NCE_PIN, "NAND NCE pin");
+ gpio_direction_output(IXDP425_NAND_NCE_PIN, 0);
/* Configure expansion bus for NAND Flash */
*IXP4XX_EXP_CS3 = IXP4XX_EXP_BUS_CS_EN |
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index ed667ce..507cb52 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -184,11 +184,8 @@ static void nas100d_power_off(void)
{
/* This causes the box to drop the power and go dead. */
- /* enable the pwr cntl gpio */
- gpio_line_config(NAS100D_PO_GPIO, IXP4XX_GPIO_OUT);
-
- /* do the deed */
- gpio_line_set(NAS100D_PO_GPIO, IXP4XX_GPIO_HIGH);
+ /* enable the pwr cntl gpio and assert power off */
+ gpio_direction_output(NAS100D_PO_GPIO, 1);
}
/* This is used to make sure the power-button pusher is serious. The button
@@ -225,7 +222,7 @@ static void nas100d_power_handler(unsigned long data)
ctrl_alt_del();
/* Change the state of the power LED to "blink" */
- gpio_line_set(NAS100D_LED_PWR_GPIO, IXP4XX_GPIO_LOW);
+ gpio_set_value(NAS100D_LED_PWR_GPIO, 0);
} else {
power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
}
@@ -242,6 +239,33 @@ static irqreturn_t nas100d_reset_handler(int irq, void *dev_id)
return IRQ_HANDLED;
}
+static int __init nas100d_gpio_init(void)
+{
+ if (!machine_is_nas100d())
+ return 0;
+
+ /*
+ * The power button on the Iomega NAS100d is on GPIO 14, but
+ * it cannot handle interrupts on that GPIO line. So we'll
+ * have to poll it with a kernel timer.
+ */
+
+ /* Request the power off GPIO */
+ gpio_request(NAS100D_PO_GPIO, "power off");
+
+ /* Make sure that the power button GPIO is set up as an input */
+ gpio_request(NAS100D_PB_GPIO, "power button");
+ gpio_direction_input(NAS100D_PB_GPIO);
+
+ /* Set the initial value for the power button IRQ handler */
+ power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
+
+ mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500));
+
+ return 0;
+}
+device_initcall(nas100d_gpio_init);
+
static void __init nas100d_init(void)
{
uint8_t __iomem *f;
@@ -278,19 +302,6 @@ static void __init nas100d_init(void)
gpio_to_irq(NAS100D_RB_GPIO));
}
- /* The power button on the Iomega NAS100d is on GPIO 14, but
- * it cannot handle interrupts on that GPIO line. So we'll
- * have to poll it with a kernel timer.
- */
-
- /* Make sure that the power button GPIO is set up as an input */
- gpio_line_config(NAS100D_PB_GPIO, IXP4XX_GPIO_IN);
-
- /* Set the initial value for the power button IRQ handler */
- power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
-
- mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500));
-
/*
* Map in a portion of the flash and read the MAC address.
* Since it is stored in BE in the flash itself, we need to
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index 7e55236..ba5f1cd 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -197,11 +197,8 @@ static void nslu2_power_off(void)
{
/* This causes the box to drop the power and go dead. */
- /* enable the pwr cntl gpio */
- gpio_line_config(NSLU2_PO_GPIO, IXP4XX_GPIO_OUT);
-
- /* do the deed */
- gpio_line_set(NSLU2_PO_GPIO, IXP4XX_GPIO_HIGH);
+ /* enable the pwr cntl gpio and assert power off */
+ gpio_direction_output(NSLU2_PO_GPIO, 1);
}
static irqreturn_t nslu2_power_handler(int irq, void *dev_id)
@@ -223,6 +220,16 @@ static irqreturn_t nslu2_reset_handler(int irq, void *dev_id)
return IRQ_HANDLED;
}
+static int __init nslu2_gpio_init(void)
+{
+ if (!machine_is_nslu2())
+ return 0;
+
+ /* Request the power off GPIO */
+ return gpio_request(NSLU2_PO_GPIO, "power off");
+}
+device_initcall(nslu2_gpio_init);
+
static void __init nslu2_timer_init(void)
{
/* The xtal on this machine is non-standard. */
diff --git a/arch/arm/mach-mmp/include/mach/gpio.h b/arch/arm/mach-mmp/include/mach/gpio.h
deleted file mode 100644
index 13219eb..0000000
--- a/arch/arm/mach-mmp/include/mach/gpio.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef __ASM_MACH_GPIO_H
-#define __ASM_MACH_GPIO_H
-
-#include <asm-generic/gpio.h>
-
-#include <mach/cputype.h>
-
-#endif /* __ASM_MACH_GPIO_H */
diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h
deleted file mode 100644
index 0248e43..0000000
--- a/arch/arm/mach-pxa/include/mach/gpio.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/gpio.h
- *
- * PXA GPIO wrappers for arch-neutral GPIO calls
- *
- * Written by Philipp Zabel <philipp.zabel@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARCH_PXA_GPIO_H
-#define __ASM_ARCH_PXA_GPIO_H
-
-#include <asm-generic/gpio.h>
-
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-
-#endif
diff --git a/arch/arm/mach-w90x900/include/mach/gpio.h b/arch/arm/mach-w90x900/include/mach/gpio.h
deleted file mode 100644
index 5385a42..0000000
--- a/arch/arm/mach-w90x900/include/mach/gpio.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * linux/arch/arm/mach-w90p910/include/mach/gpio.h
- *
- * Generic w90p910 GPIO handling
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_W90P910_GPIO_H
-#define __ASM_ARCH_W90P910_GPIO_H
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-static inline int gpio_to_irq(unsigned gpio)
-{
- return gpio;
-}
-#define gpio_to_irq gpio_to_irq
-
-static inline int irq_to_gpio(unsigned irq)
-{
- return irq;
-}
-
-#endif
diff --git a/arch/arm/plat-iop/Makefile b/arch/arm/plat-iop/Makefile
index a99dc15..224e56c 100644
--- a/arch/arm/plat-iop/Makefile
+++ b/arch/arm/plat-iop/Makefile
@@ -5,7 +5,6 @@
obj-y :=
# IOP32X
-obj-$(CONFIG_ARCH_IOP32X) += gpio.o
obj-$(CONFIG_ARCH_IOP32X) += i2c.o
obj-$(CONFIG_ARCH_IOP32X) += pci.o
obj-$(CONFIG_ARCH_IOP32X) += setup.o
@@ -16,7 +15,6 @@ obj-$(CONFIG_ARCH_IOP32X) += pmu.o
obj-$(CONFIG_ARCH_IOP32X) += restart.o
# IOP33X
-obj-$(CONFIG_ARCH_IOP33X) += gpio.o
obj-$(CONFIG_ARCH_IOP33X) += i2c.o
obj-$(CONFIG_ARCH_IOP33X) += pci.o
obj-$(CONFIG_ARCH_IOP33X) += setup.o
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 661ca82..0f04444 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -30,10 +30,6 @@ config ARCH_REQUIRE_GPIOLIB
Selecting this from the architecture code will cause the gpiolib
code to always get built in.
-config GPIO_DEVRES
- def_bool y
- depends on HAS_IOMEM
-
menuconfig GPIOLIB
bool "GPIO Support"
@@ -47,6 +43,10 @@ menuconfig GPIOLIB
if GPIOLIB
+config GPIO_DEVRES
+ def_bool y
+ depends on HAS_IOMEM
+
config OF_GPIO
def_bool y
depends on OF
@@ -129,7 +129,7 @@ config GPIO_IT8761E
config GPIO_EM
tristate "Emma Mobile GPIO"
- depends on ARM
+ depends on ARM && OF_GPIO
help
Say yes here to support GPIO on Renesas Emma Mobile SoCs.
@@ -213,7 +213,7 @@ config GPIO_OCTEON
config GPIO_PL061
bool "PrimeCell PL061 GPIO support"
- depends on ARM && ARM_AMBA
+ depends on ARM_AMBA
select GENERIC_IRQ_CHIP
help
Say yes here to support the PrimeCell PL061 GPIO device
@@ -320,6 +320,15 @@ config GPIO_ICH
If unsure, say N.
+config GPIO_IOP
+ tristate "Intel IOP GPIO"
+ depends on ARM && (ARCH_IOP32X || ARCH_IOP33X)
+ help
+ Say yes here to support the GPIO functionality of a number of Intel
+ IOP32X or IOP33X.
+
+ If unsure, say N.
+
config GPIO_VX855
tristate "VIA VX855/VX875 GPIO"
depends on PCI
@@ -616,12 +625,12 @@ config GPIO_AMD8111
If unsure, say N
-config GPIO_LANGWELL
- bool "Intel Langwell/Penwell GPIO support"
+config GPIO_INTEL_MID
+ bool "Intel Mid GPIO support"
depends on PCI && X86
select IRQ_DOMAIN
help
- Say Y here to support Intel Langwell/Penwell GPIO.
+ Say Y here to support Intel Mid GPIO.
config GPIO_PCH
tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7223/ML7831) GPIO"
@@ -707,7 +716,7 @@ config GPIO_74X164
comment "AC97 GPIO expanders:"
config GPIO_UCB1400
- bool "Philips UCB1400 GPIO"
+ tristate "Philips UCB1400 GPIO"
depends on UCB1400_CORE
help
This enables support for the Philips UCB1400 GPIO pins.
@@ -763,6 +772,12 @@ config GPIO_MSIC
Enable support for GPIO on intel MSIC controllers found in
intel MID devices
+config GPIO_BCM_KONA
+ bool "Broadcom Kona GPIO"
+ depends on OF_GPIO
+ help
+ Turn on GPIO support for Broadcom "Kona" chips.
+
comment "USB GPIO expanders:"
config GPIO_VIPERBOARD
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 2931c99..7971e36 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_GPIO_ADP5520) += gpio-adp5520.o
obj-$(CONFIG_GPIO_ADP5588) += gpio-adp5588.o
obj-$(CONFIG_GPIO_AMD8111) += gpio-amd8111.o
obj-$(CONFIG_GPIO_ARIZONA) += gpio-arizona.o
+obj-$(CONFIG_GPIO_BCM_KONA) += gpio-bcm-kona.o
obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o
obj-$(CONFIG_GPIO_CLPS711X) += gpio-clps711x.o
obj-$(CONFIG_GPIO_CS5535) += gpio-cs5535.o
@@ -28,11 +29,12 @@ obj-$(CONFIG_GPIO_F7188X) += gpio-f7188x.o
obj-$(CONFIG_GPIO_GE_FPGA) += gpio-ge.o
obj-$(CONFIG_GPIO_GRGPIO) += gpio-grgpio.o
obj-$(CONFIG_GPIO_ICH) += gpio-ich.o
+obj-$(CONFIG_GPIO_IOP) += gpio-iop.o
obj-$(CONFIG_GPIO_IT8761E) += gpio-it8761e.o
obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o
obj-$(CONFIG_GPIO_KEMPLD) += gpio-kempld.o
obj-$(CONFIG_ARCH_KS8695) += gpio-ks8695.o
-obj-$(CONFIG_GPIO_LANGWELL) += gpio-langwell.o
+obj-$(CONFIG_GPIO_INTEL_MID) += gpio-intel-mid.o
obj-$(CONFIG_ARCH_LPC32XX) += gpio-lpc32xx.o
obj-$(CONFIG_GPIO_LYNXPOINT) += gpio-lynxpoint.o
obj-$(CONFIG_GPIO_MAX730X) += gpio-max730x.o
diff --git a/drivers/gpio/devres.c b/drivers/gpio/devres.c
index 3e7812f..307464f 100644
--- a/drivers/gpio/devres.c
+++ b/drivers/gpio/devres.c
@@ -15,10 +15,95 @@
*/
#include <linux/module.h>
+#include <linux/err.h>
#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/device.h>
#include <linux/gfp.h>
+static void devm_gpiod_release(struct device *dev, void *res)
+{
+ struct gpio_desc **desc = res;
+
+ gpiod_put(*desc);
+}
+
+static int devm_gpiod_match(struct device *dev, void *res, void *data)
+{
+ struct gpio_desc **this = res, **gpio = data;
+
+ return *this == *gpio;
+}
+
+/**
+ * devm_gpiod_get - Resource-managed gpiod_get()
+ * @dev: GPIO consumer
+ * @con_id: function within the GPIO consumer
+ *
+ * Managed gpiod_get(). GPIO descriptors returned from this function are
+ * automatically disposed on driver detach. See gpiod_get() for detailed
+ * information about behavior and return values.
+ */
+struct gpio_desc *__must_check devm_gpiod_get(struct device *dev,
+ const char *con_id)
+{
+ return devm_gpiod_get_index(dev, con_id, 0);
+}
+EXPORT_SYMBOL(devm_gpiod_get);
+
+/**
+ * devm_gpiod_get_index - Resource-managed gpiod_get_index()
+ * @dev: GPIO consumer
+ * @con_id: function within the GPIO consumer
+ * @idx: index of the GPIO to obtain in the consumer
+ *
+ * Managed gpiod_get_index(). GPIO descriptors returned from this function are
+ * automatically disposed on driver detach. See gpiod_get_index() for detailed
+ * information about behavior and return values.
+ */
+struct gpio_desc *__must_check devm_gpiod_get_index(struct device *dev,
+ const char *con_id,
+ unsigned int idx)
+{
+ struct gpio_desc **dr;
+ struct gpio_desc *desc;
+
+ dr = devres_alloc(devm_gpiod_release, sizeof(struct gpiod_desc *),
+ GFP_KERNEL);
+ if (!dr)
+ return ERR_PTR(-ENOMEM);
+
+ desc = gpiod_get_index(dev, con_id, idx);
+ if (IS_ERR(desc)) {
+ devres_free(dr);
+ return desc;
+ }
+
+ *dr = desc;
+ devres_add(dev, dr);
+
+ return desc;
+}
+EXPORT_SYMBOL(devm_gpiod_get_index);
+
+/**
+ * devm_gpiod_put - Resource-managed gpiod_put()
+ * @desc: GPIO descriptor to dispose of
+ *
+ * Dispose of a GPIO descriptor obtained with devm_gpiod_get() or
+ * devm_gpiod_get_index(). Normally this function will not be called as the GPIO
+ * will be disposed of by the resource management code.
+ */
+void devm_gpiod_put(struct device *dev, struct gpio_desc *desc)
+{
+ WARN_ON(devres_release(dev, devm_gpiod_release, devm_gpiod_match,
+ &desc));
+}
+EXPORT_SYMBOL(devm_gpiod_put);
+
+
+
+
static void devm_gpio_release(struct device *dev, void *res)
{
unsigned *gpio = res;
diff --git a/drivers/gpio/gpio-74x164.c b/drivers/gpio/gpio-74x164.c
index 5d518d5..1e04bf9 100644
--- a/drivers/gpio/gpio-74x164.c
+++ b/drivers/gpio/gpio-74x164.c
@@ -176,7 +176,6 @@ static int gen_74x164_probe(struct spi_device *spi)
return ret;
exit_destroy:
- spi_set_drvdata(spi, NULL);
mutex_destroy(&chip->lock);
return ret;
}
@@ -190,8 +189,6 @@ static int gen_74x164_remove(struct spi_device *spi)
if (chip == NULL)
return -ENODEV;
- spi_set_drvdata(spi, NULL);
-
ret = gpiochip_remove(&chip->gpio_chip);
if (!ret)
mutex_destroy(&chip->lock);
@@ -212,7 +209,7 @@ static struct spi_driver gen_74x164_driver = {
.driver = {
.name = "74x164",
.owner = THIS_MODULE,
- .of_match_table = of_match_ptr(gen_74x164_dt_ids),
+ .of_match_table = gen_74x164_dt_ids,
},
.probe = gen_74x164_probe,
.remove = gen_74x164_remove,
diff --git a/drivers/gpio/gpio-adnp.c b/drivers/gpio/gpio-adnp.c
index c0f3fc4..b204033 100644
--- a/drivers/gpio/gpio-adnp.c
+++ b/drivers/gpio/gpio-adnp.c
@@ -325,9 +325,9 @@ static irqreturn_t adnp_irq(int irq, void *data)
pending &= isr & ier;
for_each_set_bit(bit, &pending, 8) {
- unsigned int virq;
- virq = irq_find_mapping(adnp->domain, base + bit);
- handle_nested_irq(virq);
+ unsigned int child_irq;
+ child_irq = irq_find_mapping(adnp->domain, base + bit);
+ handle_nested_irq(child_irq);
}
}
@@ -594,7 +594,7 @@ static struct i2c_driver adnp_i2c_driver = {
.driver = {
.name = "gpio-adnp",
.owner = THIS_MODULE,
- .of_match_table = of_match_ptr(adnp_of_match),
+ .of_match_table = adnp_of_match,
},
.probe = adnp_i2c_probe,
.remove = adnp_i2c_remove,
diff --git a/drivers/gpio/gpio-arizona.c b/drivers/gpio/gpio-arizona.c
index fa8b6a7..dceb5dc 100644
--- a/drivers/gpio/gpio-arizona.c
+++ b/drivers/gpio/gpio-arizona.c
@@ -109,10 +109,14 @@ static int arizona_gpio_probe(struct platform_device *pdev)
arizona_gpio->arizona = arizona;
arizona_gpio->gpio_chip = template_chip;
arizona_gpio->gpio_chip.dev = &pdev->dev;
+#ifdef CONFIG_OF_GPIO
+ arizona_gpio->gpio_chip.of_node = arizona->dev->of_node;
+#endif
switch (arizona->type) {
case WM5102:
case WM5110:
+ case WM8997:
arizona_gpio->gpio_chip.ngpio = 5;
break;
default:
diff --git a/drivers/gpio/gpio-bcm-kona.c b/drivers/gpio/gpio-bcm-kona.c
new file mode 100644
index 0000000..72c927d
--- /dev/null
+++ b/drivers/gpio/gpio-bcm-kona.c
@@ -0,0 +1,640 @@
+/*
+ * Copyright (C) 2012-2013 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/module.h>
+#include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
+
+#define BCM_GPIO_PASSWD 0x00a5a501
+#define GPIO_PER_BANK 32
+#define GPIO_MAX_BANK_NUM 8
+
+#define GPIO_BANK(gpio) ((gpio) >> 5)
+#define GPIO_BIT(gpio) ((gpio) & (GPIO_PER_BANK - 1))
+
+#define GPIO_OUT_STATUS(bank) (0x00000000 + ((bank) << 2))
+#define GPIO_IN_STATUS(bank) (0x00000020 + ((bank) << 2))
+#define GPIO_OUT_SET(bank) (0x00000040 + ((bank) << 2))
+#define GPIO_OUT_CLEAR(bank) (0x00000060 + ((bank) << 2))
+#define GPIO_INT_STATUS(bank) (0x00000080 + ((bank) << 2))
+#define GPIO_INT_MASK(bank) (0x000000a0 + ((bank) << 2))
+#define GPIO_INT_MSKCLR(bank) (0x000000c0 + ((bank) << 2))
+#define GPIO_CONTROL(bank) (0x00000100 + ((bank) << 2))
+#define GPIO_PWD_STATUS(bank) (0x00000500 + ((bank) << 2))
+
+#define GPIO_GPPWR_OFFSET 0x00000520
+
+#define GPIO_GPCTR0_DBR_SHIFT 5
+#define GPIO_GPCTR0_DBR_MASK 0x000001e0
+
+#define GPIO_GPCTR0_ITR_SHIFT 3
+#define GPIO_GPCTR0_ITR_MASK 0x00000018
+#define GPIO_GPCTR0_ITR_CMD_RISING_EDGE 0x00000001
+#define GPIO_GPCTR0_ITR_CMD_FALLING_EDGE 0x00000002
+#define GPIO_GPCTR0_ITR_CMD_BOTH_EDGE 0x00000003
+
+#define GPIO_GPCTR0_IOTR_MASK 0x00000001
+#define GPIO_GPCTR0_IOTR_CMD_0UTPUT 0x00000000
+#define GPIO_GPCTR0_IOTR_CMD_INPUT 0x00000001
+
+#define GPIO_GPCTR0_DB_ENABLE_MASK 0x00000100
+
+#define LOCK_CODE 0xffffffff
+#define UNLOCK_CODE 0x00000000
+
+struct bcm_kona_gpio {
+ void __iomem *reg_base;
+ int num_bank;
+ spinlock_t lock;
+ struct gpio_chip gpio_chip;
+ struct irq_domain *irq_domain;
+ struct bcm_kona_gpio_bank *banks;
+ struct platform_device *pdev;
+};
+
+struct bcm_kona_gpio_bank {
+ int id;
+ int irq;
+ /* Used in the interrupt handler */
+ struct bcm_kona_gpio *kona_gpio;
+};
+
+static inline struct bcm_kona_gpio *to_kona_gpio(struct gpio_chip *chip)
+{
+ return container_of(chip, struct bcm_kona_gpio, gpio_chip);
+}
+
+static void bcm_kona_gpio_set_lockcode_bank(void __iomem *reg_base,
+ int bank_id, int lockcode)
+{
+ writel(BCM_GPIO_PASSWD, reg_base + GPIO_GPPWR_OFFSET);
+ writel(lockcode, reg_base + GPIO_PWD_STATUS(bank_id));
+}
+
+static inline void bcm_kona_gpio_lock_bank(void __iomem *reg_base, int bank_id)
+{
+ bcm_kona_gpio_set_lockcode_bank(reg_base, bank_id, LOCK_CODE);
+}
+
+static inline void bcm_kona_gpio_unlock_bank(void __iomem *reg_base,
+ int bank_id)
+{
+ bcm_kona_gpio_set_lockcode_bank(reg_base, bank_id, UNLOCK_CODE);
+}
+
+static void bcm_kona_gpio_set(struct gpio_chip *chip, unsigned gpio, int value)
+{
+ struct bcm_kona_gpio *kona_gpio;
+ void __iomem *reg_base;
+ int bank_id = GPIO_BANK(gpio);
+ int bit = GPIO_BIT(gpio);
+ u32 val, reg_offset;
+ unsigned long flags;
+
+ kona_gpio = to_kona_gpio(chip);
+ reg_base = kona_gpio->reg_base;
+ spin_lock_irqsave(&kona_gpio->lock, flags);
+ bcm_kona_gpio_unlock_bank(reg_base, bank_id);
+
+ /* determine the GPIO pin direction */
+ val = readl(reg_base + GPIO_CONTROL(gpio));
+ val &= GPIO_GPCTR0_IOTR_MASK;
+
+ /* this function only applies to output pin */
+ if (GPIO_GPCTR0_IOTR_CMD_INPUT == val)
+ goto out;
+
+ reg_offset = value ? GPIO_OUT_SET(bank_id) : GPIO_OUT_CLEAR(bank_id);
+
+ val = readl(reg_base + reg_offset);
+ val |= BIT(bit);
+ writel(val, reg_base + reg_offset);
+
+out:
+ bcm_kona_gpio_lock_bank(reg_base, bank_id);
+ spin_unlock_irqrestore(&kona_gpio->lock, flags);
+}
+
+static int bcm_kona_gpio_get(struct gpio_chip *chip, unsigned gpio)
+{
+ struct bcm_kona_gpio *kona_gpio;
+ void __iomem *reg_base;
+ int bank_id = GPIO_BANK(gpio);
+ int bit = GPIO_BIT(gpio);
+ u32 val, reg_offset;
+ unsigned long flags;
+
+ kona_gpio = to_kona_gpio(chip);
+ reg_base = kona_gpio->reg_base;
+ spin_lock_irqsave(&kona_gpio->lock, flags);
+ bcm_kona_gpio_unlock_bank(reg_base, bank_id);
+
+ /* determine the GPIO pin direction */
+ val = readl(reg_base + GPIO_CONTROL(gpio));
+ val &= GPIO_GPCTR0_IOTR_MASK;
+
+ /* read the GPIO bank status */
+ reg_offset = (GPIO_GPCTR0_IOTR_CMD_INPUT == val) ?
+ GPIO_IN_STATUS(bank_id) : GPIO_OUT_STATUS(bank_id);
+ val = readl(reg_base + reg_offset);
+
+ bcm_kona_gpio_lock_bank(reg_base, bank_id);
+ spin_unlock_irqrestore(&kona_gpio->lock, flags);
+
+ /* return the specified bit status */
+ return !!(val & bit);
+}
+
+static int bcm_kona_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+{
+ struct bcm_kona_gpio *kona_gpio;
+ void __iomem *reg_base;
+ u32 val;
+ unsigned long flags;
+ int bank_id = GPIO_BANK(gpio);
+
+ kona_gpio = to_kona_gpio(chip);
+ reg_base = kona_gpio->reg_base;
+ spin_lock_irqsave(&kona_gpio->lock, flags);
+ bcm_kona_gpio_unlock_bank(reg_base, bank_id);
+
+ val = readl(reg_base + GPIO_CONTROL(gpio));
+ val &= ~GPIO_GPCTR0_IOTR_MASK;
+ val |= GPIO_GPCTR0_IOTR_CMD_INPUT;
+ writel(val, reg_base + GPIO_CONTROL(gpio));
+
+ bcm_kona_gpio_lock_bank(reg_base, bank_id);
+ spin_unlock_irqrestore(&kona_gpio->lock, flags);
+
+ return 0;
+}
+
+static int bcm_kona_gpio_direction_output(struct gpio_chip *chip,
+ unsigned gpio, int value)
+{
+ struct bcm_kona_gpio *kona_gpio;
+ void __iomem *reg_base;
+ int bank_id = GPIO_BANK(gpio);
+ int bit = GPIO_BIT(gpio);
+ u32 val, reg_offset;
+ unsigned long flags;
+
+ kona_gpio = to_kona_gpio(chip);
+ reg_base = kona_gpio->reg_base;
+ spin_lock_irqsave(&kona_gpio->lock, flags);
+ bcm_kona_gpio_unlock_bank(reg_base, bank_id);
+
+ val = readl(reg_base + GPIO_CONTROL(gpio));
+ val &= ~GPIO_GPCTR0_IOTR_MASK;
+ val |= GPIO_GPCTR0_IOTR_CMD_0UTPUT;
+ writel(val, reg_base + GPIO_CONTROL(gpio));
+ reg_offset = value ? GPIO_OUT_SET(bank_id) : GPIO_OUT_CLEAR(bank_id);
+
+ val = readl(reg_base + reg_offset);
+ val |= BIT(bit);
+ writel(val, reg_base + reg_offset);
+
+ bcm_kona_gpio_lock_bank(reg_base, bank_id);
+ spin_unlock_irqrestore(&kona_gpio->lock, flags);
+
+ return 0;
+}
+
+static int bcm_kona_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
+{
+ struct bcm_kona_gpio *kona_gpio;
+
+ kona_gpio = to_kona_gpio(chip);
+ if (gpio >= kona_gpio->gpio_chip.ngpio)
+ return -ENXIO;
+ return irq_create_mapping(kona_gpio->irq_domain, gpio);
+}
+
+static int bcm_kona_gpio_set_debounce(struct gpio_chip *chip, unsigned gpio,
+ unsigned debounce)
+{
+ struct bcm_kona_gpio *kona_gpio;
+ void __iomem *reg_base;
+ u32 val, res;
+ unsigned long flags;
+ int bank_id = GPIO_BANK(gpio);
+
+ kona_gpio = to_kona_gpio(chip);
+ reg_base = kona_gpio->reg_base;
+ /* debounce must be 1-128ms (or 0) */
+ if ((debounce > 0 && debounce < 1000) || debounce > 128000) {
+ dev_err(chip->dev, "Debounce value %u not in range\n",
+ debounce);
+ return -EINVAL;
+ }
+
+ /* calculate debounce bit value */
+ if (debounce != 0) {
+ /* Convert to ms */
+ debounce /= 1000;
+ /* find the MSB */
+ res = fls(debounce) - 1;
+ /* Check if MSB-1 is set (round up or down) */
+ if (res > 0 && (debounce & BIT(res - 1)))
+ res++;
+ }
+
+ /* spin lock for read-modify-write of the GPIO register */
+ spin_lock_irqsave(&kona_gpio->lock, flags);
+ bcm_kona_gpio_unlock_bank(reg_base, bank_id);
+
+ val = readl(reg_base + GPIO_CONTROL(gpio));
+ val &= ~GPIO_GPCTR0_DBR_MASK;
+
+ if (debounce == 0) {
+ /* disable debounce */
+ val &= ~GPIO_GPCTR0_DB_ENABLE_MASK;
+ } else {
+ val |= GPIO_GPCTR0_DB_ENABLE_MASK |
+ (res << GPIO_GPCTR0_DBR_SHIFT);
+ }
+
+ writel(val, reg_base + GPIO_CONTROL(gpio));
+
+ bcm_kona_gpio_lock_bank(reg_base, bank_id);
+ spin_unlock_irqrestore(&kona_gpio->lock, flags);
+
+ return 0;
+}
+
+static struct gpio_chip template_chip = {
+ .label = "bcm-kona-gpio",
+ .owner = THIS_MODULE,
+ .direction_input = bcm_kona_gpio_direction_input,
+ .get = bcm_kona_gpio_get,
+ .direction_output = bcm_kona_gpio_direction_output,
+ .set = bcm_kona_gpio_set,
+ .set_debounce = bcm_kona_gpio_set_debounce,
+ .to_irq = bcm_kona_gpio_to_irq,
+ .base = 0,
+};
+
+static void bcm_kona_gpio_irq_ack(struct irq_data *d)
+{
+ struct bcm_kona_gpio *kona_gpio;
+ void __iomem *reg_base;
+ int gpio = d->hwirq;
+ int bank_id = GPIO_BANK(gpio);
+ int bit = GPIO_BIT(gpio);
+ u32 val;
+ unsigned long flags;
+
+ kona_gpio = irq_data_get_irq_chip_data(d);
+ reg_base = kona_gpio->reg_base;
+ spin_lock_irqsave(&kona_gpio->lock, flags);
+ bcm_kona_gpio_unlock_bank(reg_base, bank_id);
+
+ val = readl(reg_base + GPIO_INT_STATUS(bank_id));
+ val |= BIT(bit);
+ writel(val, reg_base + GPIO_INT_STATUS(bank_id));
+
+ bcm_kona_gpio_lock_bank(reg_base, bank_id);
+ spin_unlock_irqrestore(&kona_gpio->lock, flags);
+}
+
+static void bcm_kona_gpio_irq_mask(struct irq_data *d)
+{
+ struct bcm_kona_gpio *kona_gpio;
+ void __iomem *reg_base;
+ int gpio = d->hwirq;
+ int bank_id = GPIO_BANK(gpio);
+ int bit = GPIO_BIT(gpio);
+ u32 val;
+ unsigned long flags;
+
+ kona_gpio = irq_data_get_irq_chip_data(d);
+ reg_base = kona_gpio->reg_base;
+ spin_lock_irqsave(&kona_gpio->lock, flags);
+ bcm_kona_gpio_unlock_bank(reg_base, bank_id);
+
+ val = readl(reg_base + GPIO_INT_MASK(bank_id));
+ val |= BIT(bit);
+ writel(val, reg_base + GPIO_INT_MASK(bank_id));
+
+ bcm_kona_gpio_lock_bank(reg_base, bank_id);
+ spin_unlock_irqrestore(&kona_gpio->lock, flags);
+}
+
+static void bcm_kona_gpio_irq_unmask(struct irq_data *d)
+{
+ struct bcm_kona_gpio *kona_gpio;
+ void __iomem *reg_base;
+ int gpio = d->hwirq;
+ int bank_id = GPIO_BANK(gpio);
+ int bit = GPIO_BIT(gpio);
+ u32 val;
+ unsigned long flags;
+
+ kona_gpio = irq_data_get_irq_chip_data(d);
+ reg_base = kona_gpio->reg_base;
+ spin_lock_irqsave(&kona_gpio->lock, flags);
+ bcm_kona_gpio_unlock_bank(reg_base, bank_id);
+
+ val = readl(reg_base + GPIO_INT_MSKCLR(bank_id));
+ val |= BIT(bit);
+ writel(val, reg_base + GPIO_INT_MSKCLR(bank_id));
+
+ bcm_kona_gpio_lock_bank(reg_base, bank_id);
+ spin_unlock_irqrestore(&kona_gpio->lock, flags);
+}
+
+static int bcm_kona_gpio_irq_set_type(struct irq_data *d, unsigned int type)
+{
+ struct bcm_kona_gpio *kona_gpio;
+ void __iomem *reg_base;
+ int gpio = d->hwirq;
+ u32 lvl_type;
+ u32 val;
+ unsigned long flags;
+ int bank_id = GPIO_BANK(gpio);
+
+ kona_gpio = irq_data_get_irq_chip_data(d);
+ reg_base = kona_gpio->reg_base;
+ switch (type & IRQ_TYPE_SENSE_MASK) {
+ case IRQ_TYPE_EDGE_RISING:
+ lvl_type = GPIO_GPCTR0_ITR_CMD_RISING_EDGE;
+ break;
+
+ case IRQ_TYPE_EDGE_FALLING:
+ lvl_type = GPIO_GPCTR0_ITR_CMD_FALLING_EDGE;
+ break;
+
+ case IRQ_TYPE_EDGE_BOTH:
+ lvl_type = GPIO_GPCTR0_ITR_CMD_BOTH_EDGE;
+ break;
+
+ case IRQ_TYPE_LEVEL_HIGH:
+ case IRQ_TYPE_LEVEL_LOW:
+ /* BCM GPIO doesn't support level triggering */
+ default:
+ dev_err(kona_gpio->gpio_chip.dev,
+ "Invalid BCM GPIO irq type 0x%x\n", type);
+ return -EINVAL;
+ }
+
+ spin_lock_irqsave(&kona_gpio->lock, flags);
+ bcm_kona_gpio_unlock_bank(reg_base, bank_id);
+
+ val = readl(reg_base + GPIO_CONTROL(gpio));
+ val &= ~GPIO_GPCTR0_ITR_MASK;
+ val |= lvl_type << GPIO_GPCTR0_ITR_SHIFT;
+ writel(val, reg_base + GPIO_CONTROL(gpio));
+
+ bcm_kona_gpio_lock_bank(reg_base, bank_id);
+ spin_unlock_irqrestore(&kona_gpio->lock, flags);
+
+ return 0;
+}
+
+static void bcm_kona_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+ void __iomem *reg_base;
+ int bit, bank_id;
+ unsigned long sta;
+ struct bcm_kona_gpio_bank *bank = irq_get_handler_data(irq);
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+
+ chained_irq_enter(chip, desc);
+
+ /*
+ * For bank interrupts, we can't use chip_data to store the kona_gpio
+ * pointer, since GIC needs it for its own purposes. Therefore, we get
+ * our pointer from the bank structure.
+ */
+ reg_base = bank->kona_gpio->reg_base;
+ bank_id = bank->id;
+ bcm_kona_gpio_unlock_bank(reg_base, bank_id);
+
+ while ((sta = readl(reg_base + GPIO_INT_STATUS(bank_id)) &
+ (~(readl(reg_base + GPIO_INT_MASK(bank_id)))))) {
+ for_each_set_bit(bit, &sta, 32) {
+ int hwirq = GPIO_PER_BANK * bank_id + bit;
+ int child_irq =
+ irq_find_mapping(bank->kona_gpio->irq_domain,
+ hwirq);
+ /*
+ * Clear interrupt before handler is called so we don't
+ * miss any interrupt occurred during executing them.
+ */
+ writel(readl(reg_base + GPIO_INT_STATUS(bank_id)) |
+ BIT(bit), reg_base + GPIO_INT_STATUS(bank_id));
+ /* Invoke interrupt handler */
+ generic_handle_irq(child_irq);
+ }
+ }
+
+ bcm_kona_gpio_lock_bank(reg_base, bank_id);
+
+ chained_irq_exit(chip, desc);
+}
+
+static struct irq_chip bcm_gpio_irq_chip = {
+ .name = "bcm-kona-gpio",
+ .irq_ack = bcm_kona_gpio_irq_ack,
+ .irq_mask = bcm_kona_gpio_irq_mask,
+ .irq_unmask = bcm_kona_gpio_irq_unmask,
+ .irq_set_type = bcm_kona_gpio_irq_set_type,
+};
+
+static struct __initconst of_device_id bcm_kona_gpio_of_match[] = {
+ { .compatible = "brcm,kona-gpio" },
+ {}
+};
+
+MODULE_DEVICE_TABLE(of, bcm_kona_gpio_of_match);
+
+/*
+ * This lock class tells lockdep that GPIO irqs are in a different
+ * category than their parents, so it won't report false recursion.
+ */
+static struct lock_class_key gpio_lock_class;
+
+static int bcm_kona_gpio_irq_map(struct irq_domain *d, unsigned int irq,
+ irq_hw_number_t hwirq)
+{
+ int ret;
+
+ ret = irq_set_chip_data(irq, d->host_data);
+ if (ret < 0)
+ return ret;
+ irq_set_lockdep_class(irq, &gpio_lock_class);
+ irq_set_chip_and_handler(irq, &bcm_gpio_irq_chip, handle_simple_irq);
+#ifdef CONFIG_ARM
+ set_irq_flags(irq, IRQF_VALID);
+#else
+ irq_set_noprobe(irq);
+#endif
+
+ return 0;
+}
+
+static void bcm_kona_gpio_irq_unmap(struct irq_domain *d, unsigned int irq)
+{
+ irq_set_chip_and_handler(irq, NULL, NULL);
+ irq_set_chip_data(irq, NULL);
+}
+
+static struct irq_domain_ops bcm_kona_irq_ops = {
+ .map = bcm_kona_gpio_irq_map,
+ .unmap = bcm_kona_gpio_irq_unmap,
+ .xlate = irq_domain_xlate_twocell,
+};
+
+static void bcm_kona_gpio_reset(struct bcm_kona_gpio *kona_gpio)
+{
+ void __iomem *reg_base;
+ int i;
+
+ reg_base = kona_gpio->reg_base;
+ /* disable interrupts and clear status */
+ for (i = 0; i < kona_gpio->num_bank; i++) {
+ bcm_kona_gpio_unlock_bank(reg_base, i);
+ writel(0xffffffff, reg_base + GPIO_INT_MASK(i));
+ writel(0xffffffff, reg_base + GPIO_INT_STATUS(i));
+ bcm_kona_gpio_lock_bank(reg_base, i);
+ }
+}
+
+static int bcm_kona_gpio_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ const struct of_device_id *match;
+ struct resource *res;
+ struct bcm_kona_gpio_bank *bank;
+ struct bcm_kona_gpio *kona_gpio;
+ struct gpio_chip *chip;
+ int ret;
+ int i;
+
+ match = of_match_device(bcm_kona_gpio_of_match, dev);
+ if (!match) {
+ dev_err(dev, "Failed to find gpio controller\n");
+ return -ENODEV;
+ }
+
+ kona_gpio = devm_kzalloc(dev, sizeof(*kona_gpio), GFP_KERNEL);
+ if (!kona_gpio)
+ return -ENOMEM;
+
+ kona_gpio->gpio_chip = template_chip;
+ chip = &kona_gpio->gpio_chip;
+ kona_gpio->num_bank = of_irq_count(dev->of_node);
+ if (kona_gpio->num_bank == 0) {
+ dev_err(dev, "Couldn't determine # GPIO banks\n");
+ return -ENOENT;
+ }
+ if (kona_gpio->num_bank > GPIO_MAX_BANK_NUM) {
+ dev_err(dev, "Too many GPIO banks configured (max=%d)\n",
+ GPIO_MAX_BANK_NUM);
+ return -ENXIO;
+ }
+ kona_gpio->banks = devm_kzalloc(dev,
+ kona_gpio->num_bank *
+ sizeof(*kona_gpio->banks), GFP_KERNEL);
+ if (!kona_gpio->banks)
+ return -ENOMEM;
+
+ kona_gpio->pdev = pdev;
+ platform_set_drvdata(pdev, kona_gpio);
+ chip->of_node = dev->of_node;
+ chip->ngpio = kona_gpio->num_bank * GPIO_PER_BANK;
+
+ kona_gpio->irq_domain = irq_domain_add_linear(dev->of_node,
+ chip->ngpio,
+ &bcm_kona_irq_ops,
+ kona_gpio);
+ if (!kona_gpio->irq_domain) {
+ dev_err(dev, "Couldn't allocate IRQ domain\n");
+ return -ENXIO;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ kona_gpio->reg_base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(kona_gpio->reg_base)) {
+ ret = -ENXIO;
+ goto err_irq_domain;
+ }
+
+ for (i = 0; i < kona_gpio->num_bank; i++) {
+ bank = &kona_gpio->banks[i];
+ bank->id = i;
+ bank->irq = platform_get_irq(pdev, i);
+ bank->kona_gpio = kona_gpio;
+ if (bank->irq < 0) {
+ dev_err(dev, "Couldn't get IRQ for bank %d", i);
+ ret = -ENOENT;
+ goto err_irq_domain;
+ }
+ }
+
+ dev_info(&pdev->dev, "Setting up Kona GPIO\n");
+
+ bcm_kona_gpio_reset(kona_gpio);
+
+ ret = gpiochip_add(chip);
+ if (ret < 0) {
+ dev_err(dev, "Couldn't add GPIO chip -- %d\n", ret);
+ goto err_irq_domain;
+ }
+ for (i = 0; i < chip->ngpio; i++) {
+ int irq = bcm_kona_gpio_to_irq(chip, i);
+ irq_set_lockdep_class(irq, &gpio_lock_class);
+ irq_set_chip_and_handler(irq, &bcm_gpio_irq_chip,
+ handle_simple_irq);
+#ifdef CONFIG_ARM
+ set_irq_flags(irq, IRQF_VALID);
+#else
+ irq_set_noprobe(irq);
+#endif
+ }
+ for (i = 0; i < kona_gpio->num_bank; i++) {
+ bank = &kona_gpio->banks[i];
+ irq_set_chained_handler(bank->irq, bcm_kona_gpio_irq_handler);
+ irq_set_handler_data(bank->irq, bank);
+ }
+
+ spin_lock_init(&kona_gpio->lock);
+
+ return 0;
+
+err_irq_domain:
+ irq_domain_remove(kona_gpio->irq_domain);
+
+ return ret;
+}
+
+static struct platform_driver bcm_kona_gpio_driver = {
+ .driver = {
+ .name = "bcm-kona-gpio",
+ .owner = THIS_MODULE,
+ .of_match_table = bcm_kona_gpio_of_match,
+ },
+ .probe = bcm_kona_gpio_probe,
+};
+
+module_platform_driver(bcm_kona_gpio_driver);
+
+MODULE_AUTHOR("Broadcom");
+MODULE_DESCRIPTION("Broadcom Kona GPIO Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-bt8xx.c b/drivers/gpio/gpio-bt8xx.c
index 8369e71..9dfe36f 100644
--- a/drivers/gpio/gpio-bt8xx.c
+++ b/drivers/gpio/gpio-bt8xx.c
@@ -228,7 +228,6 @@ static int bt8xxgpio_probe(struct pci_dev *dev,
err_release_mem:
release_mem_region(pci_resource_start(dev, 0),
pci_resource_len(dev, 0));
- pci_set_drvdata(dev, NULL);
err_disable:
pci_disable_device(dev);
err_freebg:
@@ -252,7 +251,6 @@ static void bt8xxgpio_remove(struct pci_dev *pdev)
pci_resource_len(pdev, 0));
pci_disable_device(pdev);
- pci_set_drvdata(pdev, NULL);
kfree(bg);
}
diff --git a/drivers/gpio/gpio-clps711x.c b/drivers/gpio/gpio-clps711x.c
index 0edaf2c..0924f20 100644
--- a/drivers/gpio/gpio-clps711x.c
+++ b/drivers/gpio/gpio-clps711x.c
@@ -87,7 +87,7 @@ static struct platform_driver clps711x_gpio_driver = {
.driver = {
.name = "clps711x-gpio",
.owner = THIS_MODULE,
- .of_match_table = of_match_ptr(clps711x_gpio_ids),
+ .of_match_table = clps711x_gpio_ids,
},
.probe = clps711x_gpio_probe,
.remove = clps711x_gpio_remove,
diff --git a/drivers/gpio/gpio-em.c b/drivers/gpio/gpio-em.c
index c6e1f08..ec19036 100644
--- a/drivers/gpio/gpio-em.c
+++ b/drivers/gpio/gpio-em.c
@@ -232,16 +232,16 @@ static void em_gio_free(struct gpio_chip *chip, unsigned offset)
em_gio_direction_input(chip, offset);
}
-static int em_gio_irq_domain_map(struct irq_domain *h, unsigned int virq,
- irq_hw_number_t hw)
+static int em_gio_irq_domain_map(struct irq_domain *h, unsigned int irq,
+ irq_hw_number_t hwirq)
{
struct em_gio_priv *p = h->host_data;
- pr_debug("gio: map hw irq = %d, virq = %d\n", (int)hw, virq);
+ pr_debug("gio: map hw irq = %d, irq = %d\n", (int)hwirq, irq);
- irq_set_chip_data(virq, h->host_data);
- irq_set_chip_and_handler(virq, &p->irq_chip, handle_level_irq);
- set_irq_flags(virq, IRQF_VALID); /* kill me now */
+ irq_set_chip_data(irq, h->host_data);
+ irq_set_chip_and_handler(irq, &p->irq_chip, handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID); /* kill me now */
return 0;
}
@@ -319,6 +319,7 @@ static int em_gio_probe(struct platform_device *pdev)
}
gpio_chip = &p->gpio_chip;
+ gpio_chip->of_node = pdev->dev.of_node;
gpio_chip->direction_input = em_gio_direction_input;
gpio_chip->get = em_gio_get;
gpio_chip->direction_output = em_gio_direction_output;
diff --git a/drivers/gpio/gpio-ep93xx.c b/drivers/gpio/gpio-ep93xx.c
index 56b98ee..80829f3 100644
--- a/drivers/gpio/gpio-ep93xx.c
+++ b/drivers/gpio/gpio-ep93xx.c
@@ -51,15 +51,15 @@ static void ep93xx_gpio_update_int_params(unsigned port)
{
BUG_ON(port > 2);
- __raw_writeb(0, EP93XX_GPIO_REG(int_en_register_offset[port]));
+ writeb_relaxed(0, EP93XX_GPIO_REG(int_en_register_offset[port]));
- __raw_writeb(gpio_int_type2[port],
+ writeb_relaxed(gpio_int_type2[port],
EP93XX_GPIO_REG(int_type2_register_offset[port]));
- __raw_writeb(gpio_int_type1[port],
+ writeb_relaxed(gpio_int_type1[port],
EP93XX_GPIO_REG(int_type1_register_offset[port]));
- __raw_writeb(gpio_int_unmasked[port] & gpio_int_enabled[port],
+ writeb(gpio_int_unmasked[port] & gpio_int_enabled[port],
EP93XX_GPIO_REG(int_en_register_offset[port]));
}
@@ -74,7 +74,7 @@ static void ep93xx_gpio_int_debounce(unsigned int irq, bool enable)
else
gpio_int_debounce[port] &= ~port_mask;
- __raw_writeb(gpio_int_debounce[port],
+ writeb(gpio_int_debounce[port],
EP93XX_GPIO_REG(int_debounce_register_offset[port]));
}
@@ -83,7 +83,7 @@ static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc)
unsigned char status;
int i;
- status = __raw_readb(EP93XX_GPIO_A_INT_STATUS);
+ status = readb(EP93XX_GPIO_A_INT_STATUS);
for (i = 0; i < 8; i++) {
if (status & (1 << i)) {
int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_A(0)) + i;
@@ -91,7 +91,7 @@ static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc)
}
}
- status = __raw_readb(EP93XX_GPIO_B_INT_STATUS);
+ status = readb(EP93XX_GPIO_B_INT_STATUS);
for (i = 0; i < 8; i++) {
if (status & (1 << i)) {
int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i;
@@ -124,7 +124,7 @@ static void ep93xx_gpio_irq_ack(struct irq_data *d)
ep93xx_gpio_update_int_params(port);
}
- __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
+ writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
}
static void ep93xx_gpio_irq_mask_ack(struct irq_data *d)
@@ -139,7 +139,7 @@ static void ep93xx_gpio_irq_mask_ack(struct irq_data *d)
gpio_int_unmasked[port] &= ~port_mask;
ep93xx_gpio_update_int_params(port);
- __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
+ writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
}
static void ep93xx_gpio_irq_mask(struct irq_data *d)
diff --git a/drivers/gpio/gpio-intel-mid.c b/drivers/gpio/gpio-intel-mid.c
new file mode 100644
index 0000000..be803af
--- /dev/null
+++ b/drivers/gpio/gpio-intel-mid.c
@@ -0,0 +1,471 @@
+/*
+ * Moorestown platform Langwell chip GPIO driver
+ *
+ * Copyright (c) 2008, 2009, 2013, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Supports:
+ * Moorestown platform Langwell chip.
+ * Medfield platform Penwell chip.
+ * Clovertrail platform Cloverview chip.
+ * Merrifield platform Tangier chip.
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/stddef.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+#include <linux/pm_runtime.h>
+#include <linux/irqdomain.h>
+
+#define INTEL_MID_IRQ_TYPE_EDGE (1 << 0)
+#define INTEL_MID_IRQ_TYPE_LEVEL (1 << 1)
+
+/*
+ * Langwell chip has 64 pins and thus there are 2 32bit registers to control
+ * each feature, while Penwell chip has 96 pins for each block, and need 3 32bit
+ * registers to control them, so we only define the order here instead of a
+ * structure, to get a bit offset for a pin (use GPDR as an example):
+ *
+ * nreg = ngpio / 32;
+ * reg = offset / 32;
+ * bit = offset % 32;
+ * reg_addr = reg_base + GPDR * nreg * 4 + reg * 4;
+ *
+ * so the bit of reg_addr is to control pin offset's GPDR feature
+*/
+
+enum GPIO_REG {
+ GPLR = 0, /* pin level read-only */
+ GPDR, /* pin direction */
+ GPSR, /* pin set */
+ GPCR, /* pin clear */
+ GRER, /* rising edge detect */
+ GFER, /* falling edge detect */
+ GEDR, /* edge detect result */
+ GAFR, /* alt function */
+};
+
+/* intel_mid gpio driver data */
+struct intel_mid_gpio_ddata {
+ u16 ngpio; /* number of gpio pins */
+ u32 gplr_offset; /* offset of first GPLR register from base */
+ u32 flis_base; /* base address of FLIS registers */
+ u32 flis_len; /* length of FLIS registers */
+ u32 (*get_flis_offset)(int gpio);
+ u32 chip_irq_type; /* chip interrupt type */
+};
+
+struct intel_mid_gpio {
+ struct gpio_chip chip;
+ void __iomem *reg_base;
+ spinlock_t lock;
+ struct pci_dev *pdev;
+ struct irq_domain *domain;
+};
+
+#define to_intel_gpio_priv(chip) container_of(chip, struct intel_mid_gpio, chip)
+
+static void __iomem *gpio_reg(struct gpio_chip *chip, unsigned offset,
+ enum GPIO_REG reg_type)
+{
+ struct intel_mid_gpio *priv = to_intel_gpio_priv(chip);
+ unsigned nreg = chip->ngpio / 32;
+ u8 reg = offset / 32;
+
+ return priv->reg_base + reg_type * nreg * 4 + reg * 4;
+}
+
+static void __iomem *gpio_reg_2bit(struct gpio_chip *chip, unsigned offset,
+ enum GPIO_REG reg_type)
+{
+ struct intel_mid_gpio *priv = to_intel_gpio_priv(chip);
+ unsigned nreg = chip->ngpio / 32;
+ u8 reg = offset / 16;
+
+ return priv->reg_base + reg_type * nreg * 4 + reg * 4;
+}
+
+static int intel_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+ void __iomem *gafr = gpio_reg_2bit(chip, offset, GAFR);
+ u32 value = readl(gafr);
+ int shift = (offset % 16) << 1, af = (value >> shift) & 3;
+
+ if (af) {
+ value &= ~(3 << shift);
+ writel(value, gafr);
+ }
+ return 0;
+}
+
+static int intel_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ void __iomem *gplr = gpio_reg(chip, offset, GPLR);
+
+ return readl(gplr) & BIT(offset % 32);
+}
+
+static void intel_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ void __iomem *gpsr, *gpcr;
+
+ if (value) {
+ gpsr = gpio_reg(chip, offset, GPSR);
+ writel(BIT(offset % 32), gpsr);
+ } else {
+ gpcr = gpio_reg(chip, offset, GPCR);
+ writel(BIT(offset % 32), gpcr);
+ }
+}
+
+static int intel_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct intel_mid_gpio *priv = to_intel_gpio_priv(chip);
+ void __iomem *gpdr = gpio_reg(chip, offset, GPDR);
+ u32 value;
+ unsigned long flags;
+
+ if (priv->pdev)
+ pm_runtime_get(&priv->pdev->dev);
+
+ spin_lock_irqsave(&priv->lock, flags);
+ value = readl(gpdr);
+ value &= ~BIT(offset % 32);
+ writel(value, gpdr);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ if (priv->pdev)
+ pm_runtime_put(&priv->pdev->dev);
+
+ return 0;
+}
+
+static int intel_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct intel_mid_gpio *priv = to_intel_gpio_priv(chip);
+ void __iomem *gpdr = gpio_reg(chip, offset, GPDR);
+ unsigned long flags;
+
+ intel_gpio_set(chip, offset, value);
+
+ if (priv->pdev)
+ pm_runtime_get(&priv->pdev->dev);
+
+ spin_lock_irqsave(&priv->lock, flags);
+ value = readl(gpdr);
+ value |= BIT(offset % 32);
+ writel(value, gpdr);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ if (priv->pdev)
+ pm_runtime_put(&priv->pdev->dev);
+
+ return 0;
+}
+
+static int intel_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ struct intel_mid_gpio *priv = to_intel_gpio_priv(chip);
+ return irq_create_mapping(priv->domain, offset);
+}
+
+static int intel_mid_irq_type(struct irq_data *d, unsigned type)
+{
+ struct intel_mid_gpio *priv = irq_data_get_irq_chip_data(d);
+ u32 gpio = irqd_to_hwirq(d);
+ unsigned long flags;
+ u32 value;
+ void __iomem *grer = gpio_reg(&priv->chip, gpio, GRER);
+ void __iomem *gfer = gpio_reg(&priv->chip, gpio, GFER);
+
+ if (gpio >= priv->chip.ngpio)
+ return -EINVAL;
+
+ if (priv->pdev)
+ pm_runtime_get(&priv->pdev->dev);
+
+ spin_lock_irqsave(&priv->lock, flags);
+ if (type & IRQ_TYPE_EDGE_RISING)
+ value = readl(grer) | BIT(gpio % 32);
+ else
+ value = readl(grer) & (~BIT(gpio % 32));
+ writel(value, grer);
+
+ if (type & IRQ_TYPE_EDGE_FALLING)
+ value = readl(gfer) | BIT(gpio % 32);
+ else
+ value = readl(gfer) & (~BIT(gpio % 32));
+ writel(value, gfer);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ if (priv->pdev)
+ pm_runtime_put(&priv->pdev->dev);
+
+ return 0;
+}
+
+static void intel_mid_irq_unmask(struct irq_data *d)
+{
+}
+
+static void intel_mid_irq_mask(struct irq_data *d)
+{
+}
+
+static struct irq_chip intel_mid_irqchip = {
+ .name = "INTEL_MID-GPIO",
+ .irq_mask = intel_mid_irq_mask,
+ .irq_unmask = intel_mid_irq_unmask,
+ .irq_set_type = intel_mid_irq_type,
+};
+
+static const struct intel_mid_gpio_ddata gpio_lincroft = {
+ .ngpio = 64,
+};
+
+static const struct intel_mid_gpio_ddata gpio_penwell_aon = {
+ .ngpio = 96,
+ .chip_irq_type = INTEL_MID_IRQ_TYPE_EDGE,
+};
+
+static const struct intel_mid_gpio_ddata gpio_penwell_core = {
+ .ngpio = 96,
+ .chip_irq_type = INTEL_MID_IRQ_TYPE_EDGE,
+};
+
+static const struct intel_mid_gpio_ddata gpio_cloverview_aon = {
+ .ngpio = 96,
+ .chip_irq_type = INTEL_MID_IRQ_TYPE_EDGE | INTEL_MID_IRQ_TYPE_LEVEL,
+};
+
+static const struct intel_mid_gpio_ddata gpio_cloverview_core = {
+ .ngpio = 96,
+ .chip_irq_type = INTEL_MID_IRQ_TYPE_EDGE,
+};
+
+static const struct intel_mid_gpio_ddata gpio_tangier = {
+ .ngpio = 192,
+ .gplr_offset = 4,
+ .flis_base = 0xff0c0000,
+ .flis_len = 0x8000,
+ .get_flis_offset = NULL,
+ .chip_irq_type = INTEL_MID_IRQ_TYPE_EDGE,
+};
+
+static DEFINE_PCI_DEVICE_TABLE(intel_gpio_ids) = {
+ {
+ /* Lincroft */
+ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x080f),
+ .driver_data = (kernel_ulong_t)&gpio_lincroft,
+ },
+ {
+ /* Penwell AON */
+ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081f),
+ .driver_data = (kernel_ulong_t)&gpio_penwell_aon,
+ },
+ {
+ /* Penwell Core */
+ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081a),
+ .driver_data = (kernel_ulong_t)&gpio_penwell_core,
+ },
+ {
+ /* Cloverview Aon */
+ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x08eb),
+ .driver_data = (kernel_ulong_t)&gpio_cloverview_aon,
+ },
+ {
+ /* Cloverview Core */
+ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x08f7),
+ .driver_data = (kernel_ulong_t)&gpio_cloverview_core,
+ },
+ {
+ /* Tangier */
+ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x1199),
+ .driver_data = (kernel_ulong_t)&gpio_tangier,
+ },
+ { 0 }
+};
+MODULE_DEVICE_TABLE(pci, intel_gpio_ids);
+
+static void intel_mid_irq_handler(unsigned irq, struct irq_desc *desc)
+{
+ struct irq_data *data = irq_desc_get_irq_data(desc);
+ struct intel_mid_gpio *priv = irq_data_get_irq_handler_data(data);
+ struct irq_chip *chip = irq_data_get_irq_chip(data);
+ u32 base, gpio, mask;
+ unsigned long pending;
+ void __iomem *gedr;
+
+ /* check GPIO controller to check which pin triggered the interrupt */
+ for (base = 0; base < priv->chip.ngpio; base += 32) {
+ gedr = gpio_reg(&priv->chip, base, GEDR);
+ while ((pending = readl(gedr))) {
+ gpio = __ffs(pending);
+ mask = BIT(gpio);
+ /* Clear before handling so we can't lose an edge */
+ writel(mask, gedr);
+ generic_handle_irq(irq_find_mapping(priv->domain,
+ base + gpio));
+ }
+ }
+
+ chip->irq_eoi(data);
+}
+
+static void intel_mid_irq_init_hw(struct intel_mid_gpio *priv)
+{
+ void __iomem *reg;
+ unsigned base;
+
+ for (base = 0; base < priv->chip.ngpio; base += 32) {
+ /* Clear the rising-edge detect register */
+ reg = gpio_reg(&priv->chip, base, GRER);
+ writel(0, reg);
+ /* Clear the falling-edge detect register */
+ reg = gpio_reg(&priv->chip, base, GFER);
+ writel(0, reg);
+ /* Clear the edge detect status register */
+ reg = gpio_reg(&priv->chip, base, GEDR);
+ writel(~0, reg);
+ }
+}
+
+static int intel_gpio_irq_map(struct irq_domain *d, unsigned int irq,
+ irq_hw_number_t hwirq)
+{
+ struct intel_mid_gpio *priv = d->host_data;
+
+ irq_set_chip_and_handler_name(irq, &intel_mid_irqchip,
+ handle_simple_irq, "demux");
+ irq_set_chip_data(irq, priv);
+ irq_set_irq_type(irq, IRQ_TYPE_NONE);
+
+ return 0;
+}
+
+static const struct irq_domain_ops intel_gpio_irq_ops = {
+ .map = intel_gpio_irq_map,
+ .xlate = irq_domain_xlate_twocell,
+};
+
+static int intel_gpio_runtime_idle(struct device *dev)
+{
+ pm_schedule_suspend(dev, 500);
+ return -EBUSY;
+}
+
+static const struct dev_pm_ops intel_gpio_pm_ops = {
+ SET_RUNTIME_PM_OPS(NULL, NULL, intel_gpio_runtime_idle)
+};
+
+static int intel_gpio_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ void __iomem *base;
+ struct intel_mid_gpio *priv;
+ u32 gpio_base;
+ u32 irq_base;
+ int retval;
+ struct intel_mid_gpio_ddata *ddata =
+ (struct intel_mid_gpio_ddata *)id->driver_data;
+
+ retval = pcim_enable_device(pdev);
+ if (retval)
+ return retval;
+
+ retval = pcim_iomap_regions(pdev, 1 << 0 | 1 << 1, pci_name(pdev));
+ if (retval) {
+ dev_err(&pdev->dev, "I/O memory mapping error\n");
+ return retval;
+ }
+
+ base = pcim_iomap_table(pdev)[1];
+
+ irq_base = readl(base);
+ gpio_base = readl(sizeof(u32) + base);
+
+ /* release the IO mapping, since we already get the info from bar1 */
+ pcim_iounmap_regions(pdev, 1 << 1);
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv) {
+ dev_err(&pdev->dev, "can't allocate chip data\n");
+ return -ENOMEM;
+ }
+
+ priv->reg_base = pcim_iomap_table(pdev)[0];
+ priv->chip.label = dev_name(&pdev->dev);
+ priv->chip.request = intel_gpio_request;
+ priv->chip.direction_input = intel_gpio_direction_input;
+ priv->chip.direction_output = intel_gpio_direction_output;
+ priv->chip.get = intel_gpio_get;
+ priv->chip.set = intel_gpio_set;
+ priv->chip.to_irq = intel_gpio_to_irq;
+ priv->chip.base = gpio_base;
+ priv->chip.ngpio = ddata->ngpio;
+ priv->chip.can_sleep = 0;
+ priv->pdev = pdev;
+
+ spin_lock_init(&priv->lock);
+
+ priv->domain = irq_domain_add_simple(pdev->dev.of_node, ddata->ngpio,
+ irq_base, &intel_gpio_irq_ops, priv);
+ if (!priv->domain)
+ return -ENOMEM;
+
+ pci_set_drvdata(pdev, priv);
+ retval = gpiochip_add(&priv->chip);
+ if (retval) {
+ dev_err(&pdev->dev, "gpiochip_add error %d\n", retval);
+ return retval;
+ }
+
+ intel_mid_irq_init_hw(priv);
+
+ irq_set_handler_data(pdev->irq, priv);
+ irq_set_chained_handler(pdev->irq, intel_mid_irq_handler);
+
+ pm_runtime_put_noidle(&pdev->dev);
+ pm_runtime_allow(&pdev->dev);
+
+ return 0;
+}
+
+static struct pci_driver intel_gpio_driver = {
+ .name = "intel_mid_gpio",
+ .id_table = intel_gpio_ids,
+ .probe = intel_gpio_probe,
+ .driver = {
+ .pm = &intel_gpio_pm_ops,
+ },
+};
+
+static int __init intel_gpio_init(void)
+{
+ return pci_register_driver(&intel_gpio_driver);
+}
+
+device_initcall(intel_gpio_init);
diff --git a/arch/arm/plat-iop/gpio.c b/drivers/gpio/gpio-iop.c
index 697de6d..c22a61b 100644
--- a/arch/arm/plat-iop/gpio.c
+++ b/drivers/gpio/gpio-iop.c
@@ -16,42 +16,61 @@
#include <linux/errno.h>
#include <linux/gpio.h>
#include <linux/export.h>
-#include <asm/hardware/iop3xx.h>
-#include <mach/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/bitops.h>
+#include <linux/io.h>
-void gpio_line_config(int line, int direction)
+#define IOP3XX_N_GPIOS 8
+
+#define GPIO_IN 0
+#define GPIO_OUT 1
+#define GPIO_LOW 0
+#define GPIO_HIGH 1
+
+/* Memory base offset */
+static void __iomem *base;
+
+#define IOP3XX_GPIO_REG(reg) (base + (reg))
+#define IOP3XX_GPOE IOP3XX_GPIO_REG(0x0000)
+#define IOP3XX_GPID IOP3XX_GPIO_REG(0x0004)
+#define IOP3XX_GPOD IOP3XX_GPIO_REG(0x0008)
+
+static void gpio_line_config(int line, int direction)
{
unsigned long flags;
+ u32 val;
local_irq_save(flags);
+ val = readl(IOP3XX_GPOE);
if (direction == GPIO_IN) {
- *IOP3XX_GPOE |= 1 << line;
+ val |= BIT(line);
} else if (direction == GPIO_OUT) {
- *IOP3XX_GPOE &= ~(1 << line);
+ val &= ~BIT(line);
}
+ writel(val, IOP3XX_GPOE);
local_irq_restore(flags);
}
-EXPORT_SYMBOL(gpio_line_config);
-int gpio_line_get(int line)
+static int gpio_line_get(int line)
{
- return !!(*IOP3XX_GPID & (1 << line));
+ return !!(readl(IOP3XX_GPID) & BIT(line));
}
-EXPORT_SYMBOL(gpio_line_get);
-void gpio_line_set(int line, int value)
+static void gpio_line_set(int line, int value)
{
unsigned long flags;
+ u32 val;
local_irq_save(flags);
+ val = readl(IOP3XX_GPOD);
if (value == GPIO_LOW) {
- *IOP3XX_GPOD &= ~(1 << line);
+ val &= ~BIT(line);
} else if (value == GPIO_HIGH) {
- *IOP3XX_GPOD |= 1 << line;
+ val |= BIT(line);
}
+ writel(val, IOP3XX_GPOD);
local_irq_restore(flags);
}
-EXPORT_SYMBOL(gpio_line_set);
static int iop3xx_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
{
@@ -86,8 +105,26 @@ static struct gpio_chip iop3xx_chip = {
.ngpio = IOP3XX_N_GPIOS,
};
-static int __init iop3xx_gpio_setup(void)
+static int iop3xx_gpio_probe(struct platform_device *pdev)
{
+ struct resource *res;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(&pdev->dev, res);
+
return gpiochip_add(&iop3xx_chip);
}
-arch_initcall(iop3xx_gpio_setup);
+
+static struct platform_driver iop3xx_gpio_driver = {
+ .driver = {
+ .name = "gpio-iop",
+ .owner = THIS_MODULE,
+ },
+ .probe = iop3xx_gpio_probe,
+};
+
+static int __init iop3xx_gpio_init(void)
+{
+ return platform_driver_register(&iop3xx_gpio_driver);
+}
+arch_initcall(iop3xx_gpio_init);
diff --git a/drivers/gpio/gpio-langwell.c b/drivers/gpio/gpio-langwell.c
deleted file mode 100644
index bfa1af1..0000000
--- a/drivers/gpio/gpio-langwell.c
+++ /dev/null
@@ -1,397 +0,0 @@
-/*
- * Moorestown platform Langwell chip GPIO driver
- *
- * Copyright (c) 2008, 2009, 2013, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/* Supports:
- * Moorestown platform Langwell chip.
- * Medfield platform Penwell chip.
- */
-
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/platform_device.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/stddef.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/slab.h>
-#include <linux/pm_runtime.h>
-#include <linux/irqdomain.h>
-
-/*
- * Langwell chip has 64 pins and thus there are 2 32bit registers to control
- * each feature, while Penwell chip has 96 pins for each block, and need 3 32bit
- * registers to control them, so we only define the order here instead of a
- * structure, to get a bit offset for a pin (use GPDR as an example):
- *
- * nreg = ngpio / 32;
- * reg = offset / 32;
- * bit = offset % 32;
- * reg_addr = reg_base + GPDR * nreg * 4 + reg * 4;
- *
- * so the bit of reg_addr is to control pin offset's GPDR feature
-*/
-
-enum GPIO_REG {
- GPLR = 0, /* pin level read-only */
- GPDR, /* pin direction */
- GPSR, /* pin set */
- GPCR, /* pin clear */
- GRER, /* rising edge detect */
- GFER, /* falling edge detect */
- GEDR, /* edge detect result */
- GAFR, /* alt function */
-};
-
-struct lnw_gpio {
- struct gpio_chip chip;
- void __iomem *reg_base;
- spinlock_t lock;
- struct pci_dev *pdev;
- struct irq_domain *domain;
-};
-
-#define to_lnw_priv(chip) container_of(chip, struct lnw_gpio, chip)
-
-static void __iomem *gpio_reg(struct gpio_chip *chip, unsigned offset,
- enum GPIO_REG reg_type)
-{
- struct lnw_gpio *lnw = to_lnw_priv(chip);
- unsigned nreg = chip->ngpio / 32;
- u8 reg = offset / 32;
-
- return lnw->reg_base + reg_type * nreg * 4 + reg * 4;
-}
-
-static void __iomem *gpio_reg_2bit(struct gpio_chip *chip, unsigned offset,
- enum GPIO_REG reg_type)
-{
- struct lnw_gpio *lnw = to_lnw_priv(chip);
- unsigned nreg = chip->ngpio / 32;
- u8 reg = offset / 16;
-
- return lnw->reg_base + reg_type * nreg * 4 + reg * 4;
-}
-
-static int lnw_gpio_request(struct gpio_chip *chip, unsigned offset)
-{
- void __iomem *gafr = gpio_reg_2bit(chip, offset, GAFR);
- u32 value = readl(gafr);
- int shift = (offset % 16) << 1, af = (value >> shift) & 3;
-
- if (af) {
- value &= ~(3 << shift);
- writel(value, gafr);
- }
- return 0;
-}
-
-static int lnw_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
- void __iomem *gplr = gpio_reg(chip, offset, GPLR);
-
- return readl(gplr) & BIT(offset % 32);
-}
-
-static void lnw_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
- void __iomem *gpsr, *gpcr;
-
- if (value) {
- gpsr = gpio_reg(chip, offset, GPSR);
- writel(BIT(offset % 32), gpsr);
- } else {
- gpcr = gpio_reg(chip, offset, GPCR);
- writel(BIT(offset % 32), gpcr);
- }
-}
-
-static int lnw_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-{
- struct lnw_gpio *lnw = to_lnw_priv(chip);
- void __iomem *gpdr = gpio_reg(chip, offset, GPDR);
- u32 value;
- unsigned long flags;
-
- if (lnw->pdev)
- pm_runtime_get(&lnw->pdev->dev);
-
- spin_lock_irqsave(&lnw->lock, flags);
- value = readl(gpdr);
- value &= ~BIT(offset % 32);
- writel(value, gpdr);
- spin_unlock_irqrestore(&lnw->lock, flags);
-
- if (lnw->pdev)
- pm_runtime_put(&lnw->pdev->dev);
-
- return 0;
-}
-
-static int lnw_gpio_direction_output(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- struct lnw_gpio *lnw = to_lnw_priv(chip);
- void __iomem *gpdr = gpio_reg(chip, offset, GPDR);
- unsigned long flags;
-
- lnw_gpio_set(chip, offset, value);
-
- if (lnw->pdev)
- pm_runtime_get(&lnw->pdev->dev);
-
- spin_lock_irqsave(&lnw->lock, flags);
- value = readl(gpdr);
- value |= BIT(offset % 32);
- writel(value, gpdr);
- spin_unlock_irqrestore(&lnw->lock, flags);
-
- if (lnw->pdev)
- pm_runtime_put(&lnw->pdev->dev);
-
- return 0;
-}
-
-static int lnw_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
-{
- struct lnw_gpio *lnw = to_lnw_priv(chip);
- return irq_create_mapping(lnw->domain, offset);
-}
-
-static int lnw_irq_type(struct irq_data *d, unsigned type)
-{
- struct lnw_gpio *lnw = irq_data_get_irq_chip_data(d);
- u32 gpio = irqd_to_hwirq(d);
- unsigned long flags;
- u32 value;
- void __iomem *grer = gpio_reg(&lnw->chip, gpio, GRER);
- void __iomem *gfer = gpio_reg(&lnw->chip, gpio, GFER);
-
- if (gpio >= lnw->chip.ngpio)
- return -EINVAL;
-
- if (lnw->pdev)
- pm_runtime_get(&lnw->pdev->dev);
-
- spin_lock_irqsave(&lnw->lock, flags);
- if (type & IRQ_TYPE_EDGE_RISING)
- value = readl(grer) | BIT(gpio % 32);
- else
- value = readl(grer) & (~BIT(gpio % 32));
- writel(value, grer);
-
- if (type & IRQ_TYPE_EDGE_FALLING)
- value = readl(gfer) | BIT(gpio % 32);
- else
- value = readl(gfer) & (~BIT(gpio % 32));
- writel(value, gfer);
- spin_unlock_irqrestore(&lnw->lock, flags);
-
- if (lnw->pdev)
- pm_runtime_put(&lnw->pdev->dev);
-
- return 0;
-}
-
-static void lnw_irq_unmask(struct irq_data *d)
-{
-}
-
-static void lnw_irq_mask(struct irq_data *d)
-{
-}
-
-static struct irq_chip lnw_irqchip = {
- .name = "LNW-GPIO",
- .irq_mask = lnw_irq_mask,
- .irq_unmask = lnw_irq_unmask,
- .irq_set_type = lnw_irq_type,
-};
-
-static DEFINE_PCI_DEVICE_TABLE(lnw_gpio_ids) = { /* pin number */
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x080f), .driver_data = 64 },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081f), .driver_data = 96 },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081a), .driver_data = 96 },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x08eb), .driver_data = 96 },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x08f7), .driver_data = 96 },
- { 0, }
-};
-MODULE_DEVICE_TABLE(pci, lnw_gpio_ids);
-
-static void lnw_irq_handler(unsigned irq, struct irq_desc *desc)
-{
- struct irq_data *data = irq_desc_get_irq_data(desc);
- struct lnw_gpio *lnw = irq_data_get_irq_handler_data(data);
- struct irq_chip *chip = irq_data_get_irq_chip(data);
- u32 base, gpio, mask;
- unsigned long pending;
- void __iomem *gedr;
-
- /* check GPIO controller to check which pin triggered the interrupt */
- for (base = 0; base < lnw->chip.ngpio; base += 32) {
- gedr = gpio_reg(&lnw->chip, base, GEDR);
- while ((pending = readl(gedr))) {
- gpio = __ffs(pending);
- mask = BIT(gpio);
- /* Clear before handling so we can't lose an edge */
- writel(mask, gedr);
- generic_handle_irq(irq_find_mapping(lnw->domain,
- base + gpio));
- }
- }
-
- chip->irq_eoi(data);
-}
-
-static void lnw_irq_init_hw(struct lnw_gpio *lnw)
-{
- void __iomem *reg;
- unsigned base;
-
- for (base = 0; base < lnw->chip.ngpio; base += 32) {
- /* Clear the rising-edge detect register */
- reg = gpio_reg(&lnw->chip, base, GRER);
- writel(0, reg);
- /* Clear the falling-edge detect register */
- reg = gpio_reg(&lnw->chip, base, GFER);
- writel(0, reg);
- /* Clear the edge detect status register */
- reg = gpio_reg(&lnw->chip, base, GEDR);
- writel(~0, reg);
- }
-}
-
-static int lnw_gpio_irq_map(struct irq_domain *d, unsigned int virq,
- irq_hw_number_t hw)
-{
- struct lnw_gpio *lnw = d->host_data;
-
- irq_set_chip_and_handler_name(virq, &lnw_irqchip, handle_simple_irq,
- "demux");
- irq_set_chip_data(virq, lnw);
- irq_set_irq_type(virq, IRQ_TYPE_NONE);
-
- return 0;
-}
-
-static const struct irq_domain_ops lnw_gpio_irq_ops = {
- .map = lnw_gpio_irq_map,
- .xlate = irq_domain_xlate_twocell,
-};
-
-static int lnw_gpio_runtime_idle(struct device *dev)
-{
- pm_schedule_suspend(dev, 500);
- return -EBUSY;
-}
-
-static const struct dev_pm_ops lnw_gpio_pm_ops = {
- SET_RUNTIME_PM_OPS(NULL, NULL, lnw_gpio_runtime_idle)
-};
-
-static int lnw_gpio_probe(struct pci_dev *pdev,
- const struct pci_device_id *id)
-{
- void __iomem *base;
- struct lnw_gpio *lnw;
- u32 gpio_base;
- u32 irq_base;
- int retval;
- int ngpio = id->driver_data;
-
- retval = pcim_enable_device(pdev);
- if (retval)
- return retval;
-
- retval = pcim_iomap_regions(pdev, 1 << 0 | 1 << 1, pci_name(pdev));
- if (retval) {
- dev_err(&pdev->dev, "I/O memory mapping error\n");
- return retval;
- }
-
- base = pcim_iomap_table(pdev)[1];
-
- irq_base = readl(base);
- gpio_base = readl(sizeof(u32) + base);
-
- /* release the IO mapping, since we already get the info from bar1 */
- pcim_iounmap_regions(pdev, 1 << 1);
-
- lnw = devm_kzalloc(&pdev->dev, sizeof(*lnw), GFP_KERNEL);
- if (!lnw) {
- dev_err(&pdev->dev, "can't allocate chip data\n");
- return -ENOMEM;
- }
-
- lnw->reg_base = pcim_iomap_table(pdev)[0];
- lnw->chip.label = dev_name(&pdev->dev);
- lnw->chip.request = lnw_gpio_request;
- lnw->chip.direction_input = lnw_gpio_direction_input;
- lnw->chip.direction_output = lnw_gpio_direction_output;
- lnw->chip.get = lnw_gpio_get;
- lnw->chip.set = lnw_gpio_set;
- lnw->chip.to_irq = lnw_gpio_to_irq;
- lnw->chip.base = gpio_base;
- lnw->chip.ngpio = ngpio;
- lnw->chip.can_sleep = 0;
- lnw->pdev = pdev;
-
- spin_lock_init(&lnw->lock);
-
- lnw->domain = irq_domain_add_simple(pdev->dev.of_node, ngpio, irq_base,
- &lnw_gpio_irq_ops, lnw);
- if (!lnw->domain)
- return -ENOMEM;
-
- pci_set_drvdata(pdev, lnw);
- retval = gpiochip_add(&lnw->chip);
- if (retval) {
- dev_err(&pdev->dev, "gpiochip_add error %d\n", retval);
- return retval;
- }
-
- lnw_irq_init_hw(lnw);
-
- irq_set_handler_data(pdev->irq, lnw);
- irq_set_chained_handler(pdev->irq, lnw_irq_handler);
-
- pm_runtime_put_noidle(&pdev->dev);
- pm_runtime_allow(&pdev->dev);
-
- return 0;
-}
-
-static struct pci_driver lnw_gpio_driver = {
- .name = "langwell_gpio",
- .id_table = lnw_gpio_ids,
- .probe = lnw_gpio_probe,
- .driver = {
- .pm = &lnw_gpio_pm_ops,
- },
-};
-
-static int __init lnw_gpio_init(void)
-{
- return pci_register_driver(&lnw_gpio_driver);
-}
-
-device_initcall(lnw_gpio_init);
diff --git a/drivers/gpio/gpio-lpc32xx.c b/drivers/gpio/gpio-lpc32xx.c
index 90a80eb..2d5555d 100644
--- a/drivers/gpio/gpio-lpc32xx.c
+++ b/drivers/gpio/gpio-lpc32xx.c
@@ -21,6 +21,7 @@
#include <linux/io.h>
#include <linux/errno.h>
#include <linux/gpio.h>
+#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/platform_device.h>
#include <linux/module.h>
diff --git a/drivers/gpio/gpio-lynxpoint.c b/drivers/gpio/gpio-lynxpoint.c
index 41b5913..a080474 100644
--- a/drivers/gpio/gpio-lynxpoint.c
+++ b/drivers/gpio/gpio-lynxpoint.c
@@ -242,14 +242,13 @@ static int lp_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
return irq_create_mapping(lg->domain, offset);
}
-static void lp_gpio_irq_handler(unsigned irq, struct irq_desc *desc)
+static void lp_gpio_irq_handler(unsigned hwirq, struct irq_desc *desc)
{
struct irq_data *data = irq_desc_get_irq_data(desc);
struct lp_gpio *lg = irq_data_get_irq_handler_data(data);
struct irq_chip *chip = irq_data_get_irq_chip(data);
u32 base, pin, mask;
unsigned long reg, ena, pending;
- unsigned virq;
/* check from GPIO controller which pin triggered the interrupt */
for (base = 0; base < lg->chip.ngpio; base += 32) {
@@ -257,12 +256,14 @@ static void lp_gpio_irq_handler(unsigned irq, struct irq_desc *desc)
ena = lp_gpio_reg(&lg->chip, base, LP_INT_ENABLE);
while ((pending = (inl(reg) & inl(ena)))) {
+ unsigned irq;
+
pin = __ffs(pending);
mask = BIT(pin);
/* Clear before handling so we don't lose an edge */
outl(mask, reg);
- virq = irq_find_mapping(lg->domain, base + pin);
- generic_handle_irq(virq);
+ irq = irq_find_mapping(lg->domain, base + pin);
+ generic_handle_irq(irq);
}
}
chip->irq_eoi(data);
@@ -325,15 +326,15 @@ static void lp_gpio_irq_init_hw(struct lp_gpio *lg)
}
}
-static int lp_gpio_irq_map(struct irq_domain *d, unsigned int virq,
- irq_hw_number_t hw)
+static int lp_gpio_irq_map(struct irq_domain *d, unsigned int irq,
+ irq_hw_number_t hwirq)
{
struct lp_gpio *lg = d->host_data;
- irq_set_chip_and_handler_name(virq, &lp_irqchip, handle_simple_irq,
+ irq_set_chip_and_handler_name(irq, &lp_irqchip, handle_simple_irq,
"demux");
- irq_set_chip_data(virq, lg);
- irq_set_irq_type(virq, IRQ_TYPE_NONE);
+ irq_set_chip_data(irq, lg);
+ irq_set_irq_type(irq, IRQ_TYPE_NONE);
return 0;
}
diff --git a/drivers/gpio/gpio-mc33880.c b/drivers/gpio/gpio-mc33880.c
index 3fd2caa..c0b7835 100644
--- a/drivers/gpio/gpio-mc33880.c
+++ b/drivers/gpio/gpio-mc33880.c
@@ -142,7 +142,6 @@ static int mc33880_probe(struct spi_device *spi)
return ret;
exit_destroy:
- spi_set_drvdata(spi, NULL);
mutex_destroy(&mc->lock);
return ret;
}
@@ -156,8 +155,6 @@ static int mc33880_remove(struct spi_device *spi)
if (mc == NULL)
return -ENODEV;
- spi_set_drvdata(spi, NULL);
-
ret = gpiochip_remove(&mc->chip);
if (!ret)
mutex_destroy(&mc->lock);
diff --git a/drivers/gpio/gpio-mpc8xxx.c b/drivers/gpio/gpio-mpc8xxx.c
index a0b33a2..b350649 100644
--- a/drivers/gpio/gpio-mpc8xxx.c
+++ b/drivers/gpio/gpio-mpc8xxx.c
@@ -282,16 +282,16 @@ static struct irq_chip mpc8xxx_irq_chip = {
.irq_set_type = mpc8xxx_irq_set_type,
};
-static int mpc8xxx_gpio_irq_map(struct irq_domain *h, unsigned int virq,
- irq_hw_number_t hw)
+static int mpc8xxx_gpio_irq_map(struct irq_domain *h, unsigned int irq,
+ irq_hw_number_t hwirq)
{
struct mpc8xxx_gpio_chip *mpc8xxx_gc = h->host_data;
if (mpc8xxx_gc->of_dev_id_data)
mpc8xxx_irq_chip.irq_set_type = mpc8xxx_gc->of_dev_id_data;
- irq_set_chip_data(virq, h->host_data);
- irq_set_chip_and_handler(virq, &mpc8xxx_irq_chip, handle_level_irq);
+ irq_set_chip_data(irq, h->host_data);
+ irq_set_chip_and_handler(irq, &mpc8xxx_irq_chip, handle_level_irq);
return 0;
}
diff --git a/drivers/gpio/gpio-mxs.c b/drivers/gpio/gpio-mxs.c
index f8e6af2..532bcb3 100644
--- a/drivers/gpio/gpio-mxs.c
+++ b/drivers/gpio/gpio-mxs.c
@@ -254,7 +254,6 @@ static int mxs_gpio_probe(struct platform_device *pdev)
struct device_node *parent;
static void __iomem *base;
struct mxs_gpio_port *port;
- struct resource *iores = NULL;
int irq_base;
int err;
@@ -262,16 +261,10 @@ static int mxs_gpio_probe(struct platform_device *pdev)
if (!port)
return -ENOMEM;
- if (np) {
- port->id = of_alias_get_id(np, "gpio");
- if (port->id < 0)
- return port->id;
- port->devid = (enum mxs_gpio_id) of_id->data;
- } else {
- port->id = pdev->id;
- port->devid = pdev->id_entry->driver_data;
- }
-
+ port->id = of_alias_get_id(np, "gpio");
+ if (port->id < 0)
+ return port->id;
+ port->devid = (enum mxs_gpio_id) of_id->data;
port->irq = platform_get_irq(pdev, 0);
if (port->irq < 0)
return port->irq;
@@ -281,18 +274,11 @@ static int mxs_gpio_probe(struct platform_device *pdev)
* share the same one
*/
if (!base) {
- if (np) {
- parent = of_get_parent(np);
- base = of_iomap(parent, 0);
- of_node_put(parent);
- if (!base)
- return -EADDRNOTAVAIL;
- } else {
- iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- base = devm_ioremap_resource(&pdev->dev, iores);
- if (IS_ERR(base))
- return PTR_ERR(base);
- }
+ parent = of_get_parent(np);
+ base = of_iomap(parent, 0);
+ of_node_put(parent);
+ if (!base)
+ return -EADDRNOTAVAIL;
}
port->base = base;
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 89675f8..f319c9f 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -514,6 +514,14 @@ static int gpio_irq_type(struct irq_data *d, unsigned type)
return -EINVAL;
}
+ retval = gpio_lock_as_irq(&bank->chip, offset);
+ if (retval) {
+ dev_err(bank->dev, "unable to lock offset %d for IRQ\n",
+ offset);
+ spin_unlock_irqrestore(&bank->lock, flags);
+ return retval;
+ }
+
bank->irq_usage |= 1 << GPIO_INDEX(bank, gpio);
spin_unlock_irqrestore(&bank->lock, flags);
@@ -797,6 +805,7 @@ static void gpio_irq_shutdown(struct irq_data *d)
unsigned offset = GPIO_INDEX(bank, gpio);
spin_lock_irqsave(&bank->lock, flags);
+ gpio_unlock_as_irq(&bank->chip, offset);
bank->irq_usage &= ~(1 << offset);
_disable_gpio_module(bank, offset);
_reset_gpio(bank, gpio);
@@ -957,22 +966,13 @@ static int gpio_output(struct gpio_chip *chip, unsigned offset, int value)
{
struct gpio_bank *bank;
unsigned long flags;
- int retval = 0;
bank = container_of(chip, struct gpio_bank, chip);
spin_lock_irqsave(&bank->lock, flags);
-
- if (LINE_USED(bank->irq_usage, offset)) {
- retval = -EINVAL;
- goto exit;
- }
-
bank->set_dataout(bank, offset, value);
_set_gpio_direction(bank, offset, 0);
-
-exit:
spin_unlock_irqrestore(&bank->lock, flags);
- return retval;
+ return 0;
}
static int gpio_debounce(struct gpio_chip *chip, unsigned offset,
diff --git a/drivers/gpio/gpio-palmas.c b/drivers/gpio/gpio-palmas.c
index 8588af0..11801e98 100644
--- a/drivers/gpio/gpio-palmas.c
+++ b/drivers/gpio/gpio-palmas.c
@@ -31,6 +31,10 @@ struct palmas_gpio {
struct palmas *palmas;
};
+struct palmas_device_data {
+ int ngpio;
+};
+
static inline struct palmas_gpio *to_palmas_gpio(struct gpio_chip *chip)
{
return container_of(chip, struct palmas_gpio, gpio_chip);
@@ -42,23 +46,26 @@ static int palmas_gpio_get(struct gpio_chip *gc, unsigned offset)
struct palmas *palmas = pg->palmas;
unsigned int val;
int ret;
+ unsigned int reg;
+ int gpio16 = (offset/8);
+
+ offset %= 8;
+ reg = (gpio16) ? PALMAS_GPIO_DATA_DIR2 : PALMAS_GPIO_DATA_DIR;
- ret = palmas_read(palmas, PALMAS_GPIO_BASE, PALMAS_GPIO_DATA_DIR, &val);
+ ret = palmas_read(palmas, PALMAS_GPIO_BASE, reg, &val);
if (ret < 0) {
- dev_err(gc->dev, "GPIO_DATA_DIR read failed, err = %d\n", ret);
+ dev_err(gc->dev, "Reg 0x%02x read failed, %d\n", reg, ret);
return ret;
}
- if (val & (1 << offset)) {
- ret = palmas_read(palmas, PALMAS_GPIO_BASE,
- PALMAS_GPIO_DATA_OUT, &val);
- } else {
- ret = palmas_read(palmas, PALMAS_GPIO_BASE,
- PALMAS_GPIO_DATA_IN, &val);
- }
+ if (val & BIT(offset))
+ reg = (gpio16) ? PALMAS_GPIO_DATA_OUT2 : PALMAS_GPIO_DATA_OUT;
+ else
+ reg = (gpio16) ? PALMAS_GPIO_DATA_IN2 : PALMAS_GPIO_DATA_IN;
+
+ ret = palmas_read(palmas, PALMAS_GPIO_BASE, reg, &val);
if (ret < 0) {
- dev_err(gc->dev, "GPIO_DATA_IN/OUT read failed, err = %d\n",
- ret);
+ dev_err(gc->dev, "Reg 0x%02x read failed, %d\n", reg, ret);
return ret;
}
return !!(val & BIT(offset));
@@ -70,17 +77,20 @@ static void palmas_gpio_set(struct gpio_chip *gc, unsigned offset,
struct palmas_gpio *pg = to_palmas_gpio(gc);
struct palmas *palmas = pg->palmas;
int ret;
+ unsigned int reg;
+ int gpio16 = (offset/8);
- if (value)
- ret = palmas_write(palmas, PALMAS_GPIO_BASE,
- PALMAS_GPIO_SET_DATA_OUT, BIT(offset));
+ offset %= 8;
+ if (gpio16)
+ reg = (value) ?
+ PALMAS_GPIO_SET_DATA_OUT2 : PALMAS_GPIO_CLEAR_DATA_OUT2;
else
- ret = palmas_write(palmas, PALMAS_GPIO_BASE,
- PALMAS_GPIO_CLEAR_DATA_OUT, BIT(offset));
+ reg = (value) ?
+ PALMAS_GPIO_SET_DATA_OUT : PALMAS_GPIO_CLEAR_DATA_OUT;
+
+ ret = palmas_write(palmas, PALMAS_GPIO_BASE, reg, BIT(offset));
if (ret < 0)
- dev_err(gc->dev, "%s write failed, err = %d\n",
- (value) ? "GPIO_SET_DATA_OUT" : "GPIO_CLEAR_DATA_OUT",
- ret);
+ dev_err(gc->dev, "Reg 0x%02x write failed, %d\n", reg, ret);
}
static int palmas_gpio_output(struct gpio_chip *gc, unsigned offset,
@@ -89,14 +99,19 @@ static int palmas_gpio_output(struct gpio_chip *gc, unsigned offset,
struct palmas_gpio *pg = to_palmas_gpio(gc);
struct palmas *palmas = pg->palmas;
int ret;
+ unsigned int reg;
+ int gpio16 = (offset/8);
+
+ offset %= 8;
+ reg = (gpio16) ? PALMAS_GPIO_DATA_DIR2 : PALMAS_GPIO_DATA_DIR;
/* Set the initial value */
palmas_gpio_set(gc, offset, value);
- ret = palmas_update_bits(palmas, PALMAS_GPIO_BASE,
- PALMAS_GPIO_DATA_DIR, BIT(offset), BIT(offset));
+ ret = palmas_update_bits(palmas, PALMAS_GPIO_BASE, reg,
+ BIT(offset), BIT(offset));
if (ret < 0)
- dev_err(gc->dev, "GPIO_DATA_DIR write failed, err = %d\n", ret);
+ dev_err(gc->dev, "Reg 0x%02x update failed, %d\n", reg, ret);
return ret;
}
@@ -105,11 +120,15 @@ static int palmas_gpio_input(struct gpio_chip *gc, unsigned offset)
struct palmas_gpio *pg = to_palmas_gpio(gc);
struct palmas *palmas = pg->palmas;
int ret;
+ unsigned int reg;
+ int gpio16 = (offset/8);
+
+ offset %= 8;
+ reg = (gpio16) ? PALMAS_GPIO_DATA_DIR2 : PALMAS_GPIO_DATA_DIR;
- ret = palmas_update_bits(palmas, PALMAS_GPIO_BASE,
- PALMAS_GPIO_DATA_DIR, BIT(offset), 0);
+ ret = palmas_update_bits(palmas, PALMAS_GPIO_BASE, reg, BIT(offset), 0);
if (ret < 0)
- dev_err(gc->dev, "GPIO_DATA_DIR write failed, err = %d\n", ret);
+ dev_err(gc->dev, "Reg 0x%02x update failed, %d\n", reg, ret);
return ret;
}
@@ -121,12 +140,36 @@ static int palmas_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
return palmas_irq_get_virq(palmas, PALMAS_GPIO_0_IRQ + offset);
}
+static const struct palmas_device_data palmas_dev_data = {
+ .ngpio = 8,
+};
+
+static const struct palmas_device_data tps80036_dev_data = {
+ .ngpio = 16,
+};
+
+static struct of_device_id of_palmas_gpio_match[] = {
+ { .compatible = "ti,palmas-gpio", .data = &palmas_dev_data,},
+ { .compatible = "ti,tps65913-gpio", .data = &palmas_dev_data,},
+ { .compatible = "ti,tps65914-gpio", .data = &palmas_dev_data,},
+ { .compatible = "ti,tps80036-gpio", .data = &tps80036_dev_data,},
+ { },
+};
+MODULE_DEVICE_TABLE(of, of_palmas_gpio_match);
+
static int palmas_gpio_probe(struct platform_device *pdev)
{
struct palmas *palmas = dev_get_drvdata(pdev->dev.parent);
struct palmas_platform_data *palmas_pdata;
struct palmas_gpio *palmas_gpio;
int ret;
+ const struct of_device_id *match;
+ const struct palmas_device_data *dev_data;
+
+ match = of_match_device(of_palmas_gpio_match, &pdev->dev);
+ dev_data = match->data;
+ if (!dev_data)
+ dev_data = &palmas_dev_data;
palmas_gpio = devm_kzalloc(&pdev->dev,
sizeof(*palmas_gpio), GFP_KERNEL);
@@ -138,7 +181,7 @@ static int palmas_gpio_probe(struct platform_device *pdev)
palmas_gpio->palmas = palmas;
palmas_gpio->gpio_chip.owner = THIS_MODULE;
palmas_gpio->gpio_chip.label = dev_name(&pdev->dev);
- palmas_gpio->gpio_chip.ngpio = 8;
+ palmas_gpio->gpio_chip.ngpio = dev_data->ngpio;
palmas_gpio->gpio_chip.can_sleep = 1;
palmas_gpio->gpio_chip.direction_input = palmas_gpio_input;
palmas_gpio->gpio_chip.direction_output = palmas_gpio_output;
@@ -172,15 +215,6 @@ static int palmas_gpio_remove(struct platform_device *pdev)
return gpiochip_remove(&palmas_gpio->gpio_chip);
}
-static struct of_device_id of_palmas_gpio_match[] = {
- { .compatible = "ti,palmas-gpio"},
- { .compatible = "ti,tps65913-gpio"},
- { .compatible = "ti,tps65914-gpio"},
- { .compatible = "ti,tps80036-gpio"},
- { },
-};
-MODULE_DEVICE_TABLE(of, of_palmas_gpio_match);
-
static struct platform_driver palmas_gpio_driver = {
.driver.name = "palmas-gpio",
.driver.owner = THIS_MODULE,
diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
index cdd1aa1..6e48c07 100644
--- a/drivers/gpio/gpio-pca953x.c
+++ b/drivers/gpio/gpio-pca953x.c
@@ -683,17 +683,6 @@ static int device_pca957x_init(struct pca953x_chip *chip, u32 invert)
int ret;
u8 val[MAX_BANK];
- /* Let every port in proper state, that could save power */
- memset(val, 0, NBANK(chip));
- pca953x_write_regs(chip, PCA957X_PUPD, val);
- memset(val, 0xFF, NBANK(chip));
- pca953x_write_regs(chip, PCA957X_CFG, val);
- memset(val, 0, NBANK(chip));
- pca953x_write_regs(chip, PCA957X_OUT, val);
-
- ret = pca953x_read_regs(chip, PCA957X_IN, val);
- if (ret)
- goto out;
ret = pca953x_read_regs(chip, PCA957X_OUT, chip->reg_output);
if (ret)
goto out;
diff --git a/drivers/gpio/gpio-pcf857x.c b/drivers/gpio/gpio-pcf857x.c
index 9e61bb0..1535686 100644
--- a/drivers/gpio/gpio-pcf857x.c
+++ b/drivers/gpio/gpio-pcf857x.c
@@ -26,9 +26,10 @@
#include <linux/irqdomain.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
-#include <linux/workqueue.h>
static const struct i2c_device_id pcf857x_id[] = {
@@ -50,6 +51,27 @@ static const struct i2c_device_id pcf857x_id[] = {
};
MODULE_DEVICE_TABLE(i2c, pcf857x_id);
+#ifdef CONFIG_OF
+static const struct of_device_id pcf857x_of_table[] = {
+ { .compatible = "nxp,pcf8574" },
+ { .compatible = "nxp,pcf8574a" },
+ { .compatible = "nxp,pca8574" },
+ { .compatible = "nxp,pca9670" },
+ { .compatible = "nxp,pca9672" },
+ { .compatible = "nxp,pca9674" },
+ { .compatible = "nxp,pcf8575" },
+ { .compatible = "nxp,pca8575" },
+ { .compatible = "nxp,pca9671" },
+ { .compatible = "nxp,pca9673" },
+ { .compatible = "nxp,pca9675" },
+ { .compatible = "maxim,max7328" },
+ { .compatible = "maxim,max7329" },
+ { .compatible = "ti,tca9554" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, pcf857x_of_table);
+#endif
+
/*
* The pcf857x, pca857x, and pca967x chips only expose one read and one
* write register. Writing a "one" bit (to match the reset state) lets
@@ -66,12 +88,11 @@ struct pcf857x {
struct gpio_chip chip;
struct i2c_client *client;
struct mutex lock; /* protect 'out' */
- struct work_struct work; /* irq demux work */
struct irq_domain *irq_domain; /* for irq demux */
spinlock_t slock; /* protect irq demux */
unsigned out; /* software latch */
unsigned status; /* current status */
- int irq; /* real irq number */
+ unsigned irq_mapped; /* mapped gpio irqs */
int (*write)(struct i2c_client *client, unsigned data);
int (*read)(struct i2c_client *client);
@@ -164,48 +185,54 @@ static void pcf857x_set(struct gpio_chip *chip, unsigned offset, int value)
static int pcf857x_to_irq(struct gpio_chip *chip, unsigned offset)
{
struct pcf857x *gpio = container_of(chip, struct pcf857x, chip);
+ int ret;
- return irq_create_mapping(gpio->irq_domain, offset);
+ ret = irq_create_mapping(gpio->irq_domain, offset);
+ if (ret > 0)
+ gpio->irq_mapped |= (1 << offset);
+
+ return ret;
}
-static void pcf857x_irq_demux_work(struct work_struct *work)
+static irqreturn_t pcf857x_irq(int irq, void *data)
{
- struct pcf857x *gpio = container_of(work,
- struct pcf857x,
- work);
+ struct pcf857x *gpio = data;
unsigned long change, i, status, flags;
status = gpio->read(gpio->client);
spin_lock_irqsave(&gpio->slock, flags);
- change = gpio->status ^ status;
+ /*
+ * call the interrupt handler iff gpio is used as
+ * interrupt source, just to avoid bad irqs
+ */
+
+ change = ((gpio->status ^ status) & gpio->irq_mapped);
for_each_set_bit(i, &change, gpio->chip.ngpio)
generic_handle_irq(irq_find_mapping(gpio->irq_domain, i));
gpio->status = status;
spin_unlock_irqrestore(&gpio->slock, flags);
-}
-
-static irqreturn_t pcf857x_irq_demux(int irq, void *data)
-{
- struct pcf857x *gpio = data;
-
- /*
- * pcf857x can't read/write data here,
- * since i2c data access might go to sleep.
- */
- schedule_work(&gpio->work);
return IRQ_HANDLED;
}
-static int pcf857x_irq_domain_map(struct irq_domain *domain, unsigned int virq,
+static int pcf857x_irq_domain_map(struct irq_domain *domain, unsigned int irq,
irq_hw_number_t hw)
{
- irq_set_chip_and_handler(virq,
+ struct pcf857x *gpio = domain->host_data;
+
+ irq_set_chip_and_handler(irq,
&dummy_irq_chip,
handle_level_irq);
+#ifdef CONFIG_ARM
+ set_irq_flags(irq, IRQF_VALID);
+#else
+ irq_set_noprobe(irq);
+#endif
+ gpio->irq_mapped |= (1 << hw);
+
return 0;
}
@@ -218,8 +245,6 @@ static void pcf857x_irq_domain_cleanup(struct pcf857x *gpio)
if (gpio->irq_domain)
irq_domain_remove(gpio->irq_domain);
- if (gpio->irq)
- free_irq(gpio->irq, gpio);
}
static int pcf857x_irq_domain_init(struct pcf857x *gpio,
@@ -230,20 +255,21 @@ static int pcf857x_irq_domain_init(struct pcf857x *gpio,
gpio->irq_domain = irq_domain_add_linear(client->dev.of_node,
gpio->chip.ngpio,
&pcf857x_irq_domain_ops,
- NULL);
+ gpio);
if (!gpio->irq_domain)
goto fail;
/* enable real irq */
- status = request_irq(client->irq, pcf857x_irq_demux, 0,
- dev_name(&client->dev), gpio);
+ status = devm_request_threaded_irq(&client->dev, client->irq,
+ NULL, pcf857x_irq, IRQF_ONESHOT |
+ IRQF_TRIGGER_FALLING,
+ dev_name(&client->dev), gpio);
+
if (status)
goto fail;
/* enable gpio_to_irq() */
- INIT_WORK(&gpio->work, pcf857x_irq_demux_work);
gpio->chip.to_irq = pcf857x_to_irq;
- gpio->irq = client->irq;
return 0;
@@ -257,14 +283,18 @@ fail:
static int pcf857x_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
- struct pcf857x_platform_data *pdata;
+ struct pcf857x_platform_data *pdata = dev_get_platdata(&client->dev);
+ struct device_node *np = client->dev.of_node;
struct pcf857x *gpio;
+ unsigned int n_latch = 0;
int status;
- pdata = dev_get_platdata(&client->dev);
- if (!pdata) {
+ if (IS_ENABLED(CONFIG_OF) && np)
+ of_property_read_u32(np, "lines-initial-states", &n_latch);
+ else if (pdata)
+ n_latch = pdata->n_latch;
+ else
dev_dbg(&client->dev, "no platform data\n");
- }
/* Allocate, initialize, and register this gpio_chip. */
gpio = devm_kzalloc(&client->dev, sizeof(*gpio), GFP_KERNEL);
@@ -357,11 +387,11 @@ static int pcf857x_probe(struct i2c_client *client,
* may cause transient glitching since it can't know the last value
* written (some pins may need to be driven low).
*
- * Using pdata->n_latch avoids that trouble. When left initialized
- * to zero, our software copy of the "latch" then matches the chip's
- * all-ones reset state. Otherwise it flags pins to be driven low.
+ * Using n_latch avoids that trouble. When left initialized to zero,
+ * our software copy of the "latch" then matches the chip's all-ones
+ * reset state. Otherwise it flags pins to be driven low.
*/
- gpio->out = pdata ? ~pdata->n_latch : ~0;
+ gpio->out = ~n_latch;
gpio->status = gpio->out;
status = gpiochip_add(&gpio->chip);
@@ -423,6 +453,7 @@ static struct i2c_driver pcf857x_driver = {
.driver = {
.name = "pcf857x",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(pcf857x_of_table),
},
.probe = pcf857x_probe,
.remove = pcf857x_remove,
diff --git a/drivers/gpio/gpio-pl061.c b/drivers/gpio/gpio-pl061.c
index 4274e2e..f22f7f3 100644
--- a/drivers/gpio/gpio-pl061.c
+++ b/drivers/gpio/gpio-pl061.c
@@ -238,15 +238,15 @@ static struct irq_chip pl061_irqchip = {
.irq_set_type = pl061_irq_type,
};
-static int pl061_irq_map(struct irq_domain *d, unsigned int virq,
- irq_hw_number_t hw)
+static int pl061_irq_map(struct irq_domain *d, unsigned int irq,
+ irq_hw_number_t hwirq)
{
struct pl061_gpio *chip = d->host_data;
- irq_set_chip_and_handler_name(virq, &pl061_irqchip, handle_simple_irq,
+ irq_set_chip_and_handler_name(irq, &pl061_irqchip, handle_simple_irq,
"pl061");
- irq_set_chip_data(virq, chip);
- irq_set_irq_type(virq, IRQ_TYPE_NONE);
+ irq_set_chip_data(irq, chip);
+ irq_set_irq_type(irq, IRQ_TYPE_NONE);
return 0;
}
diff --git a/drivers/gpio/gpio-rcar.c b/drivers/gpio/gpio-rcar.c
index 6038966..d3f15ae 100644
--- a/drivers/gpio/gpio-rcar.c
+++ b/drivers/gpio/gpio-rcar.c
@@ -22,6 +22,7 @@
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/module.h>
+#include <linux/of.h>
#include <linux/pinctrl/consumer.h>
#include <linux/platform_data/gpio-rcar.h>
#include <linux/platform_device.h>
@@ -266,16 +267,16 @@ static int gpio_rcar_to_irq(struct gpio_chip *chip, unsigned offset)
return irq_create_mapping(gpio_to_priv(chip)->irq_domain, offset);
}
-static int gpio_rcar_irq_domain_map(struct irq_domain *h, unsigned int virq,
- irq_hw_number_t hw)
+static int gpio_rcar_irq_domain_map(struct irq_domain *h, unsigned int irq,
+ irq_hw_number_t hwirq)
{
struct gpio_rcar_priv *p = h->host_data;
- dev_dbg(&p->pdev->dev, "map hw irq = %d, virq = %d\n", (int)hw, virq);
+ dev_dbg(&p->pdev->dev, "map hw irq = %d, irq = %d\n", (int)hwirq, irq);
- irq_set_chip_data(virq, h->host_data);
- irq_set_chip_and_handler(virq, &p->irq_chip, handle_level_irq);
- set_irq_flags(virq, IRQF_VALID); /* kill me now */
+ irq_set_chip_data(irq, h->host_data);
+ irq_set_chip_and_handler(irq, &p->irq_chip, handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID); /* kill me now */
return 0;
}
diff --git a/drivers/gpio/gpio-stmpe.c b/drivers/gpio/gpio-stmpe.c
index b33bad1..2647e24 100644
--- a/drivers/gpio/gpio-stmpe.c
+++ b/drivers/gpio/gpio-stmpe.c
@@ -254,9 +254,10 @@ static irqreturn_t stmpe_gpio_irq(int irq, void *dev)
while (stat) {
int bit = __ffs(stat);
int line = bank * 8 + bit;
- int virq = irq_find_mapping(stmpe_gpio->domain, line);
+ int child_irq = irq_find_mapping(stmpe_gpio->domain,
+ line);
- handle_nested_irq(virq);
+ handle_nested_irq(child_irq);
stat &= ~(1 << bit);
}
@@ -271,7 +272,7 @@ static irqreturn_t stmpe_gpio_irq(int irq, void *dev)
return IRQ_HANDLED;
}
-static int stmpe_gpio_irq_map(struct irq_domain *d, unsigned int virq,
+static int stmpe_gpio_irq_map(struct irq_domain *d, unsigned int irq,
irq_hw_number_t hwirq)
{
struct stmpe_gpio *stmpe_gpio = d->host_data;
@@ -279,26 +280,26 @@ static int stmpe_gpio_irq_map(struct irq_domain *d, unsigned int virq,
if (!stmpe_gpio)
return -EINVAL;
- irq_set_chip_data(hwirq, stmpe_gpio);
- irq_set_chip_and_handler(hwirq, &stmpe_gpio_irq_chip,
+ irq_set_chip_data(irq, stmpe_gpio);
+ irq_set_chip_and_handler(irq, &stmpe_gpio_irq_chip,
handle_simple_irq);
- irq_set_nested_thread(hwirq, 1);
+ irq_set_nested_thread(irq, 1);
#ifdef CONFIG_ARM
- set_irq_flags(hwirq, IRQF_VALID);
+ set_irq_flags(irq, IRQF_VALID);
#else
- irq_set_noprobe(hwirq);
+ irq_set_noprobe(irq);
#endif
return 0;
}
-static void stmpe_gpio_irq_unmap(struct irq_domain *d, unsigned int virq)
+static void stmpe_gpio_irq_unmap(struct irq_domain *d, unsigned int irq)
{
#ifdef CONFIG_ARM
- set_irq_flags(virq, 0);
+ set_irq_flags(irq, 0);
#endif
- irq_set_chip_and_handler(virq, NULL, NULL);
- irq_set_chip_data(virq, NULL);
+ irq_set_chip_and_handler(irq, NULL, NULL);
+ irq_set_chip_data(irq, NULL);
}
static const struct irq_domain_ops stmpe_gpio_irq_simple_ops = {
diff --git a/drivers/gpio/gpio-tc3589x.c b/drivers/gpio/gpio-tc3589x.c
index 4a5de27..ddb5fef 100644
--- a/drivers/gpio/gpio-tc3589x.c
+++ b/drivers/gpio/gpio-tc3589x.c
@@ -96,27 +96,27 @@ static int tc3589x_gpio_direction_input(struct gpio_chip *chip,
}
/**
- * tc3589x_gpio_irq_get_virq(): Map an interrupt on a chip to a virtual IRQ
+ * tc3589x_gpio_irq_get_irq(): Map a hardware IRQ on a chip to a Linux IRQ
*
* @tc3589x_gpio: tc3589x_gpio_irq controller to operate on.
- * @irq: index of the interrupt requested in the chip IRQs
+ * @irq: index of the hardware interrupt requested in the chip IRQs
*
* Useful for drivers to request their own IRQs.
*/
-static int tc3589x_gpio_irq_get_virq(struct tc3589x_gpio *tc3589x_gpio,
- int irq)
+static int tc3589x_gpio_irq_get_irq(struct tc3589x_gpio *tc3589x_gpio,
+ int hwirq)
{
if (!tc3589x_gpio)
return -EINVAL;
- return irq_create_mapping(tc3589x_gpio->domain, irq);
+ return irq_create_mapping(tc3589x_gpio->domain, hwirq);
}
static int tc3589x_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
{
struct tc3589x_gpio *tc3589x_gpio = to_tc3589x_gpio(chip);
- return tc3589x_gpio_irq_get_virq(tc3589x_gpio, offset);
+ return tc3589x_gpio_irq_get_irq(tc3589x_gpio, offset);
}
static struct gpio_chip template_chip = {
@@ -242,9 +242,9 @@ static irqreturn_t tc3589x_gpio_irq(int irq, void *dev)
while (stat) {
int bit = __ffs(stat);
int line = i * 8 + bit;
- int virq = tc3589x_gpio_irq_get_virq(tc3589x_gpio, line);
+ int irq = tc3589x_gpio_irq_get_irq(tc3589x_gpio, line);
- handle_nested_irq(virq);
+ handle_nested_irq(irq);
stat &= ~(1 << bit);
}
@@ -254,31 +254,31 @@ static irqreturn_t tc3589x_gpio_irq(int irq, void *dev)
return IRQ_HANDLED;
}
-static int tc3589x_gpio_irq_map(struct irq_domain *d, unsigned int virq,
+static int tc3589x_gpio_irq_map(struct irq_domain *d, unsigned int irq,
irq_hw_number_t hwirq)
{
struct tc3589x *tc3589x_gpio = d->host_data;
- irq_set_chip_data(virq, tc3589x_gpio);
- irq_set_chip_and_handler(virq, &tc3589x_gpio_irq_chip,
+ irq_set_chip_data(irq, tc3589x_gpio);
+ irq_set_chip_and_handler(irq, &tc3589x_gpio_irq_chip,
handle_simple_irq);
- irq_set_nested_thread(virq, 1);
+ irq_set_nested_thread(irq, 1);
#ifdef CONFIG_ARM
- set_irq_flags(virq, IRQF_VALID);
+ set_irq_flags(irq, IRQF_VALID);
#else
- irq_set_noprobe(virq);
+ irq_set_noprobe(irq);
#endif
return 0;
}
-static void tc3589x_gpio_irq_unmap(struct irq_domain *d, unsigned int virq)
+static void tc3589x_gpio_irq_unmap(struct irq_domain *d, unsigned int irq)
{
#ifdef CONFIG_ARM
- set_irq_flags(virq, 0);
+ set_irq_flags(irq, 0);
#endif
- irq_set_chip_and_handler(virq, NULL, NULL);
- irq_set_chip_data(virq, NULL);
+ irq_set_chip_and_handler(irq, NULL, NULL);
+ irq_set_chip_data(irq, NULL);
}
static struct irq_domain_ops tc3589x_irq_ops = {
diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c
index 9a62672..cfd3b90 100644
--- a/drivers/gpio/gpio-tegra.c
+++ b/drivers/gpio/gpio-tegra.c
@@ -75,6 +75,7 @@ struct tegra_gpio_bank {
#endif
};
+static struct device *dev;
static struct irq_domain *irq_domain;
static void __iomem *regs;
static u32 tegra_gpio_bank_count;
@@ -205,6 +206,7 @@ static int tegra_gpio_irq_set_type(struct irq_data *d, unsigned int type)
int lvl_type;
int val;
unsigned long flags;
+ int ret;
switch (type & IRQ_TYPE_SENSE_MASK) {
case IRQ_TYPE_EDGE_RISING:
@@ -231,6 +233,12 @@ static int tegra_gpio_irq_set_type(struct irq_data *d, unsigned int type)
return -EINVAL;
}
+ ret = gpio_lock_as_irq(&tegra_gpio_chip, gpio);
+ if (ret) {
+ dev_err(dev, "unable to lock Tegra GPIO %d as IRQ\n", gpio);
+ return ret;
+ }
+
spin_lock_irqsave(&bank->lvl_lock[port], flags);
val = tegra_gpio_readl(GPIO_INT_LVL(gpio));
@@ -251,6 +259,13 @@ static int tegra_gpio_irq_set_type(struct irq_data *d, unsigned int type)
return 0;
}
+static void tegra_gpio_irq_shutdown(struct irq_data *d)
+{
+ int gpio = d->hwirq;
+
+ gpio_unlock_as_irq(&tegra_gpio_chip, gpio);
+}
+
static void tegra_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
{
struct tegra_gpio_bank *bank;
@@ -368,6 +383,7 @@ static struct irq_chip tegra_gpio_irq_chip = {
.irq_mask = tegra_gpio_irq_mask,
.irq_unmask = tegra_gpio_irq_unmask,
.irq_set_type = tegra_gpio_irq_set_type,
+ .irq_shutdown = tegra_gpio_irq_shutdown,
#ifdef CONFIG_PM_SLEEP
.irq_set_wake = tegra_gpio_irq_set_wake,
#endif
@@ -413,6 +429,8 @@ static int tegra_gpio_probe(struct platform_device *pdev)
int i;
int j;
+ dev = &pdev->dev;
+
match = of_match_device(tegra_gpio_of_match, &pdev->dev);
if (!match) {
dev_err(&pdev->dev, "Error: No device match found\n");
diff --git a/drivers/gpio/gpio-twl4030.c b/drivers/gpio/gpio-twl4030.c
index d8e4f6e..0c7e891 100644
--- a/drivers/gpio/gpio-twl4030.c
+++ b/drivers/gpio/gpio-twl4030.c
@@ -594,7 +594,7 @@ static struct platform_driver gpio_twl4030_driver = {
.driver = {
.name = "twl4030_gpio",
.owner = THIS_MODULE,
- .of_match_table = of_match_ptr(twl_gpio_match),
+ .of_match_table = twl_gpio_match,
},
.probe = gpio_twl4030_probe,
.remove = gpio_twl4030_remove,
diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
index 5c1ef2b..ae0ffdc 100644
--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -11,7 +11,7 @@
*/
#include <linux/errno.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/export.h>
#include <linux/acpi_gpio.h>
#include <linux/acpi.h>
@@ -33,14 +33,15 @@ static int acpi_gpiochip_find(struct gpio_chip *gc, void *data)
}
/**
- * acpi_get_gpio() - Translate ACPI GPIO pin to GPIO number usable with GPIO API
+ * acpi_get_gpiod() - Translate ACPI GPIO pin to GPIO descriptor usable with GPIO API
* @path: ACPI GPIO controller full path name, (e.g. "\\_SB.GPO1")
* @pin: ACPI GPIO pin number (0-based, controller-relative)
*
- * Returns GPIO number to use with Linux generic GPIO API, or errno error value
+ * Returns GPIO descriptor to use with Linux generic GPIO API, or ERR_PTR
+ * error value
*/
-int acpi_get_gpio(char *path, int pin)
+static struct gpio_desc *acpi_get_gpiod(char *path, int pin)
{
struct gpio_chip *chip;
acpi_handle handle;
@@ -48,18 +49,17 @@ int acpi_get_gpio(char *path, int pin)
status = acpi_get_handle(NULL, path, &handle);
if (ACPI_FAILURE(status))
- return -ENODEV;
+ return ERR_PTR(-ENODEV);
chip = gpiochip_find(handle, acpi_gpiochip_find);
if (!chip)
- return -ENODEV;
+ return ERR_PTR(-ENODEV);
- if (!gpio_is_valid(chip->base + pin))
- return -EINVAL;
+ if (pin < 0 || pin > chip->ngpio)
+ return ERR_PTR(-EINVAL);
- return chip->base + pin;
+ return gpio_to_desc(chip->base + pin);
}
-EXPORT_SYMBOL_GPL(acpi_get_gpio);
static irqreturn_t acpi_gpio_irq_handler(int irq, void *data)
{
@@ -73,15 +73,8 @@ static irqreturn_t acpi_gpio_irq_handler(int irq, void *data)
static irqreturn_t acpi_gpio_irq_handler_evt(int irq, void *data)
{
struct acpi_gpio_evt_pin *evt_pin = data;
- struct acpi_object_list args;
- union acpi_object arg;
- arg.type = ACPI_TYPE_INTEGER;
- arg.integer.value = evt_pin->pin;
- args.count = 1;
- args.pointer = &arg;
-
- acpi_evaluate_object(evt_pin->evt_handle, NULL, &args, NULL);
+ acpi_execute_simple_method(evt_pin->evt_handle, NULL, evt_pin->pin);
return IRQ_HANDLED;
}
@@ -201,10 +194,48 @@ void acpi_gpiochip_request_interrupts(struct gpio_chip *chip)
}
EXPORT_SYMBOL(acpi_gpiochip_request_interrupts);
+/**
+ * acpi_gpiochip_free_interrupts() - Free GPIO _EVT ACPI event interrupts.
+ * @chip: gpio chip
+ *
+ * Free interrupts associated with the _EVT method for the given GPIO chip.
+ *
+ * The remaining ACPI event interrupts associated with the chip are freed
+ * automatically.
+ */
+void acpi_gpiochip_free_interrupts(struct gpio_chip *chip)
+{
+ acpi_handle handle;
+ acpi_status status;
+ struct list_head *evt_pins;
+ struct acpi_gpio_evt_pin *evt_pin, *ep;
+
+ if (!chip->dev || !chip->to_irq)
+ return;
+
+ handle = ACPI_HANDLE(chip->dev);
+ if (!handle)
+ return;
+
+ status = acpi_get_data(handle, acpi_gpio_evt_dh, (void **)&evt_pins);
+ if (ACPI_FAILURE(status))
+ return;
+
+ list_for_each_entry_safe_reverse(evt_pin, ep, evt_pins, node) {
+ devm_free_irq(chip->dev, evt_pin->irq, evt_pin);
+ list_del(&evt_pin->node);
+ kfree(evt_pin);
+ }
+
+ acpi_detach_data(handle, acpi_gpio_evt_dh);
+ kfree(evt_pins);
+}
+EXPORT_SYMBOL(acpi_gpiochip_free_interrupts);
+
struct acpi_gpio_lookup {
struct acpi_gpio_info info;
int index;
- int gpio;
+ struct gpio_desc *desc;
int n;
};
@@ -215,37 +246,39 @@ static int acpi_find_gpio(struct acpi_resource *ares, void *data)
if (ares->type != ACPI_RESOURCE_TYPE_GPIO)
return 1;
- if (lookup->n++ == lookup->index && lookup->gpio < 0) {
+ if (lookup->n++ == lookup->index && !lookup->desc) {
const struct acpi_resource_gpio *agpio = &ares->data.gpio;
- lookup->gpio = acpi_get_gpio(agpio->resource_source.string_ptr,
- agpio->pin_table[0]);
+ lookup->desc = acpi_get_gpiod(agpio->resource_source.string_ptr,
+ agpio->pin_table[0]);
lookup->info.gpioint =
agpio->connection_type == ACPI_RESOURCE_GPIO_TYPE_INT;
+ lookup->info.active_low =
+ agpio->polarity == ACPI_ACTIVE_LOW;
}
return 1;
}
/**
- * acpi_get_gpio_by_index() - get a GPIO number from device resources
+ * acpi_get_gpiod_by_index() - get a GPIO descriptor from device resources
* @dev: pointer to a device to get GPIO from
* @index: index of GpioIo/GpioInt resource (starting from %0)
* @info: info pointer to fill in (optional)
*
* Function goes through ACPI resources for @dev and based on @index looks
- * up a GpioIo/GpioInt resource, translates it to the Linux GPIO number,
+ * up a GpioIo/GpioInt resource, translates it to the Linux GPIO descriptor,
* and returns it. @index matches GpioIo/GpioInt resources only so if there
* are total %3 GPIO resources, the index goes from %0 to %2.
*
- * If the GPIO cannot be translated or there is an error, negative errno is
+ * If the GPIO cannot be translated or there is an error an ERR_PTR is
* returned.
*
* Note: if the GPIO resource has multiple entries in the pin list, this
* function only returns the first.
*/
-int acpi_get_gpio_by_index(struct device *dev, int index,
- struct acpi_gpio_info *info)
+struct gpio_desc *acpi_get_gpiod_by_index(struct device *dev, int index,
+ struct acpi_gpio_info *info)
{
struct acpi_gpio_lookup lookup;
struct list_head resource_list;
@@ -254,65 +287,26 @@ int acpi_get_gpio_by_index(struct device *dev, int index,
int ret;
if (!dev)
- return -EINVAL;
+ return ERR_PTR(-EINVAL);
handle = ACPI_HANDLE(dev);
if (!handle || acpi_bus_get_device(handle, &adev))
- return -ENODEV;
+ return ERR_PTR(-ENODEV);
memset(&lookup, 0, sizeof(lookup));
lookup.index = index;
- lookup.gpio = -ENODEV;
INIT_LIST_HEAD(&resource_list);
ret = acpi_dev_get_resources(adev, &resource_list, acpi_find_gpio,
&lookup);
if (ret < 0)
- return ret;
+ return ERR_PTR(ret);
acpi_dev_free_resource_list(&resource_list);
- if (lookup.gpio >= 0 && info)
+ if (lookup.desc && info)
*info = lookup.info;
- return lookup.gpio;
+ return lookup.desc ? lookup.desc : ERR_PTR(-ENODEV);
}
-EXPORT_SYMBOL_GPL(acpi_get_gpio_by_index);
-
-/**
- * acpi_gpiochip_free_interrupts() - Free GPIO _EVT ACPI event interrupts.
- * @chip: gpio chip
- *
- * Free interrupts associated with the _EVT method for the given GPIO chip.
- *
- * The remaining ACPI event interrupts associated with the chip are freed
- * automatically.
- */
-void acpi_gpiochip_free_interrupts(struct gpio_chip *chip)
-{
- acpi_handle handle;
- acpi_status status;
- struct list_head *evt_pins;
- struct acpi_gpio_evt_pin *evt_pin, *ep;
-
- if (!chip->dev || !chip->to_irq)
- return;
-
- handle = ACPI_HANDLE(chip->dev);
- if (!handle)
- return;
-
- status = acpi_get_data(handle, acpi_gpio_evt_dh, (void **)&evt_pins);
- if (ACPI_FAILURE(status))
- return;
-
- list_for_each_entry_safe_reverse(evt_pin, ep, evt_pins, node) {
- devm_free_irq(chip->dev, evt_pin->irq, evt_pin);
- list_del(&evt_pin->node);
- kfree(evt_pin);
- }
-
- acpi_detach_data(handle, acpi_gpio_evt_dh);
- kfree(evt_pins);
-}
-EXPORT_SYMBOL(acpi_gpiochip_free_interrupts);
+EXPORT_SYMBOL_GPL(acpi_get_gpiod_by_index);
diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
index e787609..e0a98f5 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -15,19 +15,21 @@
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/io.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_gpio.h>
#include <linux/pinctrl/pinctrl.h>
#include <linux/slab.h>
+struct gpio_desc;
+
/* Private data structure for of_gpiochip_find_and_xlate */
struct gg_data {
enum of_gpio_flags *flags;
struct of_phandle_args gpiospec;
- int out_gpio;
+ struct gpio_desc *out_gpio;
};
/* Private function for resolving node pointer to gpio_chip */
@@ -45,28 +47,31 @@ static int of_gpiochip_find_and_xlate(struct gpio_chip *gc, void *data)
if (ret < 0)
return false;
- gg_data->out_gpio = ret + gc->base;
+ gg_data->out_gpio = gpio_to_desc(ret + gc->base);
return true;
}
/**
- * of_get_named_gpio_flags() - Get a GPIO number and flags to use with GPIO API
+ * of_get_named_gpiod_flags() - Get a GPIO descriptor and flags for GPIO API
* @np: device node to get GPIO from
* @propname: property name containing gpio specifier(s)
* @index: index of the GPIO
* @flags: a flags pointer to fill in
*
- * Returns GPIO number to use with Linux generic GPIO API, or one of the errno
+ * Returns GPIO descriptor to use with Linux GPIO API, or one of the errno
* value on the error condition. If @flags is not NULL the function also fills
* in flags for the GPIO.
*/
-int of_get_named_gpio_flags(struct device_node *np, const char *propname,
- int index, enum of_gpio_flags *flags)
+struct gpio_desc *of_get_named_gpiod_flags(struct device_node *np,
+ const char *propname, int index, enum of_gpio_flags *flags)
{
/* Return -EPROBE_DEFER to support probe() functions to be called
* later when the GPIO actually becomes available
*/
- struct gg_data gg_data = { .flags = flags, .out_gpio = -EPROBE_DEFER };
+ struct gg_data gg_data = {
+ .flags = flags,
+ .out_gpio = ERR_PTR(-EPROBE_DEFER)
+ };
int ret;
/* .of_xlate might decide to not fill in the flags, so clear it. */
@@ -78,16 +83,17 @@ int of_get_named_gpio_flags(struct device_node *np, const char *propname,
if (ret) {
pr_debug("%s: can't parse gpios property of node '%s[%d]'\n",
__func__, np->full_name, index);
- return ret;
+ return ERR_PTR(ret);
}
gpiochip_find(&gg_data, of_gpiochip_find_and_xlate);
of_node_put(gg_data.gpiospec.np);
- pr_debug("%s exited with status %d\n", __func__, gg_data.out_gpio);
+ pr_debug("%s exited with status %d\n", __func__,
+ PTR_RET(gg_data.out_gpio));
return gg_data.out_gpio;
}
-EXPORT_SYMBOL(of_get_named_gpio_flags);
+EXPORT_SYMBOL(of_get_named_gpiod_flags);
/**
* of_gpio_simple_xlate - translate gpio_spec to the GPIO number and flags
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 4a34ca9..7dd4461 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -10,22 +10,18 @@
#include <linux/seq_file.h>
#include <linux/gpio.h>
#include <linux/of_gpio.h>
+#include <linux/acpi_gpio.h>
#include <linux/idr.h>
#include <linux/slab.h>
#define CREATE_TRACE_POINTS
#include <trace/events/gpio.h>
-/* Optional implementation infrastructure for GPIO interfaces.
+/* Implementation infrastructure for GPIO interfaces.
*
- * Platforms may want to use this if they tend to use very many GPIOs
- * that aren't part of a System-On-Chip core; or across I2C/SPI/etc.
- *
- * When kernel footprint or instruction count is an issue, simpler
- * implementations may be preferred. The GPIO programming interface
- * allows for inlining speed-critical get/set operations for common
- * cases, so that access to SOC-integrated GPIOs can sometimes cost
- * only an instruction or two per bit.
+ * The GPIO programming interface allows for inlining speed-critical
+ * get/set operations for common cases, so that access to SOC-integrated
+ * GPIOs can sometimes cost only an instruction or two per bit.
*/
@@ -57,9 +53,10 @@ struct gpio_desc {
#define FLAG_SYSFS 3 /* exported via /sys/class/gpio/control */
#define FLAG_TRIG_FALL 4 /* trigger on falling edge */
#define FLAG_TRIG_RISE 5 /* trigger on rising edge */
-#define FLAG_ACTIVE_LOW 6 /* sysfs value has active low */
+#define FLAG_ACTIVE_LOW 6 /* value has active low */
#define FLAG_OPEN_DRAIN 7 /* Gpio is open drain type */
#define FLAG_OPEN_SOURCE 8 /* Gpio is open source type */
+#define FLAG_USED_AS_IRQ 9 /* GPIO is connected to an IRQ */
#define ID_SHIFT 16 /* add new flags before this one */
@@ -74,34 +71,50 @@ static struct gpio_desc gpio_desc[ARCH_NR_GPIOS];
#define GPIO_OFFSET_VALID(chip, offset) (offset >= 0 && offset < chip->ngpio)
+static DEFINE_MUTEX(gpio_lookup_lock);
+static LIST_HEAD(gpio_lookup_list);
static LIST_HEAD(gpio_chips);
#ifdef CONFIG_GPIO_SYSFS
static DEFINE_IDR(dirent_idr);
#endif
-/*
- * Internal gpiod_* API using descriptors instead of the integer namespace.
- * Most of this should eventually go public.
- */
static int gpiod_request(struct gpio_desc *desc, const char *label);
static void gpiod_free(struct gpio_desc *desc);
-static int gpiod_direction_input(struct gpio_desc *desc);
-static int gpiod_direction_output(struct gpio_desc *desc, int value);
-static int gpiod_get_direction(const struct gpio_desc *desc);
-static int gpiod_set_debounce(struct gpio_desc *desc, unsigned debounce);
-static int gpiod_get_value_cansleep(const struct gpio_desc *desc);
-static void gpiod_set_value_cansleep(struct gpio_desc *desc, int value);
-static int gpiod_get_value(const struct gpio_desc *desc);
-static void gpiod_set_value(struct gpio_desc *desc, int value);
-static int gpiod_cansleep(const struct gpio_desc *desc);
-static int gpiod_to_irq(const struct gpio_desc *desc);
-static int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
-static int gpiod_export_link(struct device *dev, const char *name,
- struct gpio_desc *desc);
-static int gpiod_sysfs_set_active_low(struct gpio_desc *desc, int value);
-static void gpiod_unexport(struct gpio_desc *desc);
+#ifdef CONFIG_DEBUG_FS
+#define gpiod_emerg(desc, fmt, ...) \
+ pr_emerg("gpio-%d (%s): " fmt, desc_to_gpio(desc), desc->label, \
+ ##__VA_ARGS__)
+#define gpiod_crit(desc, fmt, ...) \
+ pr_crit("gpio-%d (%s): " fmt, desc_to_gpio(desc), desc->label, \
+ ##__VA_ARGS__)
+#define gpiod_err(desc, fmt, ...) \
+ pr_err("gpio-%d (%s): " fmt, desc_to_gpio(desc), desc->label, \
+ ##__VA_ARGS__)
+#define gpiod_warn(desc, fmt, ...) \
+ pr_warn("gpio-%d (%s): " fmt, desc_to_gpio(desc), desc->label, \
+ ##__VA_ARGS__)
+#define gpiod_info(desc, fmt, ...) \
+ pr_info("gpio-%d (%s): " fmt, desc_to_gpio(desc), desc->label, \
+ ##__VA_ARGS__)
+#define gpiod_dbg(desc, fmt, ...) \
+ pr_debug("gpio-%d (%s): " fmt, desc_to_gpio(desc), desc->label, \
+ ##__VA_ARGS__)
+#else
+#define gpiod_emerg(desc, fmt, ...) \
+ pr_emerg("gpio-%d: " fmt, desc_to_gpio(desc), ##__VA_ARGS__)
+#define gpiod_crit(desc, fmt, ...) \
+ pr_crit("gpio-%d: " fmt, desc_to_gpio(desc), ##__VA_ARGS__)
+#define gpiod_err(desc, fmt, ...) \
+ pr_err("gpio-%d: " fmt, desc_to_gpio(desc), ##__VA_ARGS__)
+#define gpiod_warn(desc, fmt, ...) \
+ pr_warn("gpio-%d: " fmt, desc_to_gpio(desc), ##__VA_ARGS__)
+#define gpiod_info(desc, fmt, ...) \
+ pr_info("gpio-%d: " fmt, desc_to_gpio(desc), ##__VA_ARGS__)
+#define gpiod_dbg(desc, fmt, ...) \
+ pr_debug("gpio-%d: " fmt, desc_to_gpio(desc), ##__VA_ARGS__)
+#endif
static inline void desc_set_label(struct gpio_desc *d, const char *label)
{
@@ -121,23 +134,36 @@ static int gpio_chip_hwgpio(const struct gpio_desc *desc)
/**
* Convert a GPIO number to its descriptor
*/
-static struct gpio_desc *gpio_to_desc(unsigned gpio)
+struct gpio_desc *gpio_to_desc(unsigned gpio)
{
if (WARN(!gpio_is_valid(gpio), "invalid GPIO %d\n", gpio))
return NULL;
else
return &gpio_desc[gpio];
}
+EXPORT_SYMBOL_GPL(gpio_to_desc);
+
+/**
+ * Convert an offset on a certain chip to a corresponding descriptor
+ */
+static struct gpio_desc *gpiochip_offset_to_desc(struct gpio_chip *chip,
+ unsigned int offset)
+{
+ unsigned int gpio = chip->base + offset;
+
+ return gpio_to_desc(gpio);
+}
/**
* Convert a GPIO descriptor to the integer namespace.
* This should disappear in the future but is needed since we still
* use GPIO numbers for error messages and sysfs nodes
*/
-static int desc_to_gpio(const struct gpio_desc *desc)
+int desc_to_gpio(const struct gpio_desc *desc)
{
return desc - &gpio_desc[0];
}
+EXPORT_SYMBOL_GPL(desc_to_gpio);
/* Warn when drivers omit gpio_request() calls -- legal but ill-advised
@@ -172,16 +198,15 @@ static int gpio_ensure_requested(struct gpio_desc *desc)
return 0;
}
-static struct gpio_chip *gpiod_to_chip(const struct gpio_desc *desc)
+/**
+ * gpiod_to_chip - Return the GPIO chip to which a GPIO descriptor belongs
+ * @desc: descriptor to return the chip of
+ */
+struct gpio_chip *gpiod_to_chip(const struct gpio_desc *desc)
{
return desc ? desc->chip : NULL;
}
-
-/* caller holds gpio_lock *OR* gpio is marked as requested */
-struct gpio_chip *gpio_to_chip(unsigned gpio)
-{
- return gpiod_to_chip(gpio_to_desc(gpio));
-}
+EXPORT_SYMBOL_GPL(gpiod_to_chip);
/* dynamic allocation of GPIOs, e.g. on a hotplugged device */
static int gpiochip_find_base(int ngpio)
@@ -207,8 +232,15 @@ static int gpiochip_find_base(int ngpio)
}
}
-/* caller ensures gpio is valid and requested, chip->get_direction may sleep */
-static int gpiod_get_direction(const struct gpio_desc *desc)
+/**
+ * gpiod_get_direction - return the current direction of a GPIO
+ * @desc: GPIO to get the direction of
+ *
+ * Return GPIOF_DIR_IN or GPIOF_DIR_OUT, or an error code in case of error.
+ *
+ * This function may sleep if gpiod_cansleep() is true.
+ */
+int gpiod_get_direction(const struct gpio_desc *desc)
{
struct gpio_chip *chip;
unsigned offset;
@@ -234,6 +266,7 @@ static int gpiod_get_direction(const struct gpio_desc *desc)
}
return status;
}
+EXPORT_SYMBOL_GPL(gpiod_get_direction);
#ifdef CONFIG_GPIO_SYSFS
@@ -318,17 +351,10 @@ static ssize_t gpio_value_show(struct device *dev,
mutex_lock(&sysfs_lock);
- if (!test_bit(FLAG_EXPORT, &desc->flags)) {
+ if (!test_bit(FLAG_EXPORT, &desc->flags))
status = -EIO;
- } else {
- int value;
-
- value = !!gpiod_get_value_cansleep(desc);
- if (test_bit(FLAG_ACTIVE_LOW, &desc->flags))
- value = !value;
-
- status = sprintf(buf, "%d\n", value);
- }
+ else
+ status = sprintf(buf, "%d\n", gpiod_get_value_cansleep(desc));
mutex_unlock(&sysfs_lock);
return status;
@@ -351,9 +377,7 @@ static ssize_t gpio_value_store(struct device *dev,
status = kstrtol(buf, 0, &value);
if (status == 0) {
- if (test_bit(FLAG_ACTIVE_LOW, &desc->flags))
- value = !value;
- gpiod_set_value_cansleep(desc, value != 0);
+ gpiod_set_value_cansleep(desc, value);
status = size;
}
}
@@ -395,6 +419,7 @@ static int gpio_setup_irq(struct gpio_desc *desc, struct device *dev,
desc->flags &= ~GPIO_TRIGGER_MASK;
if (!gpio_flags) {
+ gpiod_unlock_as_irq(desc);
ret = 0;
goto free_id;
}
@@ -433,6 +458,12 @@ static int gpio_setup_irq(struct gpio_desc *desc, struct device *dev,
if (ret < 0)
goto free_id;
+ ret = gpiod_lock_as_irq(desc);
+ if (ret < 0) {
+ gpiod_warn(desc, "failed to flag the GPIO for IRQ\n");
+ goto free_id;
+ }
+
desc->flags |= gpio_flags;
return 0;
@@ -736,7 +767,7 @@ static struct class gpio_class = {
/**
- * gpio_export - export a GPIO through sysfs
+ * gpiod_export - export a GPIO through sysfs
* @gpio: gpio to make available, already requested
* @direction_may_change: true if userspace may change gpio direction
* Context: arch_initcall or later
@@ -750,7 +781,7 @@ static struct class gpio_class = {
*
* Returns zero on success, else an error.
*/
-static int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
+int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
{
unsigned long flags;
int status;
@@ -828,12 +859,7 @@ fail_unlock:
status);
return status;
}
-
-int gpio_export(unsigned gpio, bool direction_may_change)
-{
- return gpiod_export(gpio_to_desc(gpio), direction_may_change);
-}
-EXPORT_SYMBOL_GPL(gpio_export);
+EXPORT_SYMBOL_GPL(gpiod_export);
static int match_export(struct device *dev, const void *data)
{
@@ -841,7 +867,7 @@ static int match_export(struct device *dev, const void *data)
}
/**
- * gpio_export_link - create a sysfs link to an exported GPIO node
+ * gpiod_export_link - create a sysfs link to an exported GPIO node
* @dev: device under which to create symlink
* @name: name of the symlink
* @gpio: gpio to create symlink to, already exported
@@ -851,8 +877,8 @@ static int match_export(struct device *dev, const void *data)
*
* Returns zero on success, else an error.
*/
-static int gpiod_export_link(struct device *dev, const char *name,
- struct gpio_desc *desc)
+int gpiod_export_link(struct device *dev, const char *name,
+ struct gpio_desc *desc)
{
int status = -EINVAL;
@@ -883,15 +909,10 @@ static int gpiod_export_link(struct device *dev, const char *name,
return status;
}
-
-int gpio_export_link(struct device *dev, const char *name, unsigned gpio)
-{
- return gpiod_export_link(dev, name, gpio_to_desc(gpio));
-}
-EXPORT_SYMBOL_GPL(gpio_export_link);
+EXPORT_SYMBOL_GPL(gpiod_export_link);
/**
- * gpio_sysfs_set_active_low - set the polarity of gpio sysfs value
+ * gpiod_sysfs_set_active_low - set the polarity of gpio sysfs value
* @gpio: gpio to change
* @value: non-zero to use active low, i.e. inverted values
*
@@ -902,7 +923,7 @@ EXPORT_SYMBOL_GPL(gpio_export_link);
*
* Returns zero on success, else an error.
*/
-static int gpiod_sysfs_set_active_low(struct gpio_desc *desc, int value)
+int gpiod_sysfs_set_active_low(struct gpio_desc *desc, int value)
{
struct device *dev = NULL;
int status = -EINVAL;
@@ -933,20 +954,15 @@ unlock:
return status;
}
-
-int gpio_sysfs_set_active_low(unsigned gpio, int value)
-{
- return gpiod_sysfs_set_active_low(gpio_to_desc(gpio), value);
-}
-EXPORT_SYMBOL_GPL(gpio_sysfs_set_active_low);
+EXPORT_SYMBOL_GPL(gpiod_sysfs_set_active_low);
/**
- * gpio_unexport - reverse effect of gpio_export()
+ * gpiod_unexport - reverse effect of gpio_export()
* @gpio: gpio to make unavailable
*
* This is implicit on gpio_free().
*/
-static void gpiod_unexport(struct gpio_desc *desc)
+void gpiod_unexport(struct gpio_desc *desc)
{
int status = 0;
struct device *dev = NULL;
@@ -979,12 +995,7 @@ static void gpiod_unexport(struct gpio_desc *desc)
pr_debug("%s: gpio%d status %d\n", __func__, desc_to_gpio(desc),
status);
}
-
-void gpio_unexport(unsigned gpio)
-{
- gpiod_unexport(gpio_to_desc(gpio));
-}
-EXPORT_SYMBOL_GPL(gpio_unexport);
+EXPORT_SYMBOL_GPL(gpiod_unexport);
static int gpiochip_export(struct gpio_chip *chip)
{
@@ -1091,27 +1102,6 @@ static inline void gpiochip_unexport(struct gpio_chip *chip)
{
}
-static inline int gpiod_export(struct gpio_desc *desc,
- bool direction_may_change)
-{
- return -ENOSYS;
-}
-
-static inline int gpiod_export_link(struct device *dev, const char *name,
- struct gpio_desc *desc)
-{
- return -ENOSYS;
-}
-
-static inline int gpiod_sysfs_set_active_low(struct gpio_desc *desc, int value)
-{
- return -ENOSYS;
-}
-
-static inline void gpiod_unexport(struct gpio_desc *desc)
-{
-}
-
#endif /* CONFIG_GPIO_SYSFS */
/*
@@ -1670,7 +1660,16 @@ EXPORT_SYMBOL_GPL(gpiochip_is_requested);
* rely on gpio_request() having been called beforehand.
*/
-static int gpiod_direction_input(struct gpio_desc *desc)
+/**
+ * gpiod_direction_input - set the GPIO direction to input
+ * @desc: GPIO to set to input
+ *
+ * Set the direction of the passed GPIO to input, such as gpiod_get_value() can
+ * be called safely on it.
+ *
+ * Return 0 in case of success, else an error code.
+ */
+int gpiod_direction_input(struct gpio_desc *desc)
{
unsigned long flags;
struct gpio_chip *chip;
@@ -1684,8 +1683,9 @@ static int gpiod_direction_input(struct gpio_desc *desc)
chip = desc->chip;
if (!chip->get || !chip->direction_input) {
- pr_warn("%s: missing get() or direction_input() operations\n",
- __func__);
+ gpiod_warn(desc,
+ "%s: missing get() or direction_input() operations\n",
+ __func__);
return -EIO;
}
@@ -1705,8 +1705,7 @@ static int gpiod_direction_input(struct gpio_desc *desc)
if (status) {
status = chip->request(chip, offset);
if (status < 0) {
- pr_debug("GPIO-%d: chip request fail, %d\n",
- desc_to_gpio(desc), status);
+ gpiod_dbg(desc, "chip request fail, %d\n", status);
/* and it's not available to anyone else ...
* gpio_request() is the fully clean solution.
*/
@@ -1724,18 +1723,22 @@ lose:
fail:
spin_unlock_irqrestore(&gpio_lock, flags);
if (status)
- pr_debug("%s: gpio-%d status %d\n", __func__,
- desc_to_gpio(desc), status);
+ gpiod_dbg(desc, "%s status %d\n", __func__, status);
return status;
}
+EXPORT_SYMBOL_GPL(gpiod_direction_input);
-int gpio_direction_input(unsigned gpio)
-{
- return gpiod_direction_input(gpio_to_desc(gpio));
-}
-EXPORT_SYMBOL_GPL(gpio_direction_input);
-
-static int gpiod_direction_output(struct gpio_desc *desc, int value)
+/**
+ * gpiod_direction_output - set the GPIO direction to input
+ * @desc: GPIO to set to output
+ * @value: initial output value of the GPIO
+ *
+ * Set the direction of the passed GPIO to output, such as gpiod_set_value() can
+ * be called safely on it. The initial value of the output must be specified.
+ *
+ * Return 0 in case of success, else an error code.
+ */
+int gpiod_direction_output(struct gpio_desc *desc, int value)
{
unsigned long flags;
struct gpio_chip *chip;
@@ -1747,6 +1750,14 @@ static int gpiod_direction_output(struct gpio_desc *desc, int value)
return -EINVAL;
}
+ /* GPIOs used for IRQs shall not be set as output */
+ if (test_bit(FLAG_USED_AS_IRQ, &desc->flags)) {
+ gpiod_err(desc,
+ "%s: tried to set a GPIO tied to an IRQ as output\n",
+ __func__);
+ return -EIO;
+ }
+
/* Open drain pin should not be driven to 1 */
if (value && test_bit(FLAG_OPEN_DRAIN, &desc->flags))
return gpiod_direction_input(desc);
@@ -1757,8 +1768,9 @@ static int gpiod_direction_output(struct gpio_desc *desc, int value)
chip = desc->chip;
if (!chip->set || !chip->direction_output) {
- pr_warn("%s: missing set() or direction_output() operations\n",
- __func__);
+ gpiod_warn(desc,
+ "%s: missing set() or direction_output() operations\n",
+ __func__);
return -EIO;
}
@@ -1778,8 +1790,7 @@ static int gpiod_direction_output(struct gpio_desc *desc, int value)
if (status) {
status = chip->request(chip, offset);
if (status < 0) {
- pr_debug("GPIO-%d: chip request fail, %d\n",
- desc_to_gpio(desc), status);
+ gpiod_dbg(desc, "chip request fail, %d\n", status);
/* and it's not available to anyone else ...
* gpio_request() is the fully clean solution.
*/
@@ -1797,26 +1808,20 @@ lose:
fail:
spin_unlock_irqrestore(&gpio_lock, flags);
if (status)
- pr_debug("%s: gpio-%d status %d\n", __func__,
- desc_to_gpio(desc), status);
+ gpiod_dbg(desc, "%s: gpio status %d\n", __func__, status);
return status;
}
-
-int gpio_direction_output(unsigned gpio, int value)
-{
- return gpiod_direction_output(gpio_to_desc(gpio), value);
-}
-EXPORT_SYMBOL_GPL(gpio_direction_output);
+EXPORT_SYMBOL_GPL(gpiod_direction_output);
/**
- * gpio_set_debounce - sets @debounce time for a @gpio
+ * gpiod_set_debounce - sets @debounce time for a @gpio
* @gpio: the gpio to set debounce time
* @debounce: debounce time is microseconds
*
* returns -ENOTSUPP if the controller does not support setting
* debounce.
*/
-static int gpiod_set_debounce(struct gpio_desc *desc, unsigned debounce)
+int gpiod_set_debounce(struct gpio_desc *desc, unsigned debounce)
{
unsigned long flags;
struct gpio_chip *chip;
@@ -1830,8 +1835,9 @@ static int gpiod_set_debounce(struct gpio_desc *desc, unsigned debounce)
chip = desc->chip;
if (!chip->set || !chip->set_debounce) {
- pr_debug("%s: missing set() or set_debounce() operations\n",
- __func__);
+ gpiod_dbg(desc,
+ "%s: missing set() or set_debounce() operations\n",
+ __func__);
return -ENOTSUPP;
}
@@ -1853,17 +1859,23 @@ static int gpiod_set_debounce(struct gpio_desc *desc, unsigned debounce)
fail:
spin_unlock_irqrestore(&gpio_lock, flags);
if (status)
- pr_debug("%s: gpio-%d status %d\n", __func__,
- desc_to_gpio(desc), status);
+ gpiod_dbg(desc, "%s: status %d\n", __func__, status);
return status;
}
+EXPORT_SYMBOL_GPL(gpiod_set_debounce);
-int gpio_set_debounce(unsigned gpio, unsigned debounce)
+/**
+ * gpiod_is_active_low - test whether a GPIO is active-low or not
+ * @desc: the gpio descriptor to test
+ *
+ * Returns 1 if the GPIO is active-low, 0 otherwise.
+ */
+int gpiod_is_active_low(const struct gpio_desc *desc)
{
- return gpiod_set_debounce(gpio_to_desc(gpio), debounce);
+ return test_bit(FLAG_ACTIVE_LOW, &desc->flags);
}
-EXPORT_SYMBOL_GPL(gpio_set_debounce);
+EXPORT_SYMBOL_GPL(gpiod_is_active_low);
/* I/O calls are only valid after configuration completed; the relevant
* "is this a valid GPIO" error checks should already have been done.
@@ -1887,42 +1899,68 @@ EXPORT_SYMBOL_GPL(gpio_set_debounce);
* that the GPIO was actually requested.
*/
-/**
- * __gpio_get_value() - return a gpio's value
- * @gpio: gpio whose value will be returned
- * Context: any
- *
- * This is used directly or indirectly to implement gpio_get_value().
- * It returns the zero or nonzero value provided by the associated
- * gpio_chip.get() method; or zero if no such method is provided.
- */
-static int gpiod_get_value(const struct gpio_desc *desc)
+static int _gpiod_get_raw_value(const struct gpio_desc *desc)
{
struct gpio_chip *chip;
int value;
int offset;
- if (!desc)
- return 0;
chip = desc->chip;
offset = gpio_chip_hwgpio(desc);
- /* Should be using gpio_get_value_cansleep() */
- WARN_ON(chip->can_sleep);
value = chip->get ? chip->get(chip, offset) : 0;
trace_gpio_value(desc_to_gpio(desc), 1, value);
return value;
}
-int __gpio_get_value(unsigned gpio)
+/**
+ * gpiod_get_raw_value() - return a gpio's raw value
+ * @desc: gpio whose value will be returned
+ *
+ * Return the GPIO's raw value, i.e. the value of the physical line disregarding
+ * its ACTIVE_LOW status.
+ *
+ * This function should be called from contexts where we cannot sleep, and will
+ * complain if the GPIO chip functions potentially sleep.
+ */
+int gpiod_get_raw_value(const struct gpio_desc *desc)
+{
+ if (!desc)
+ return 0;
+ /* Should be using gpio_get_value_cansleep() */
+ WARN_ON(desc->chip->can_sleep);
+ return _gpiod_get_raw_value(desc);
+}
+EXPORT_SYMBOL_GPL(gpiod_get_raw_value);
+
+/**
+ * gpiod_get_value() - return a gpio's value
+ * @desc: gpio whose value will be returned
+ *
+ * Return the GPIO's logical value, i.e. taking the ACTIVE_LOW status into
+ * account.
+ *
+ * This function should be called from contexts where we cannot sleep, and will
+ * complain if the GPIO chip functions potentially sleep.
+ */
+int gpiod_get_value(const struct gpio_desc *desc)
{
- return gpiod_get_value(gpio_to_desc(gpio));
+ int value;
+ if (!desc)
+ return 0;
+ /* Should be using gpio_get_value_cansleep() */
+ WARN_ON(desc->chip->can_sleep);
+
+ value = _gpiod_get_raw_value(desc);
+ if (test_bit(FLAG_ACTIVE_LOW, &desc->flags))
+ value = !value;
+
+ return value;
}
-EXPORT_SYMBOL_GPL(__gpio_get_value);
+EXPORT_SYMBOL_GPL(gpiod_get_value);
/*
* _gpio_set_open_drain_value() - Set the open drain gpio's value.
- * @gpio: Gpio whose state need to be set.
- * @chip: Gpio chip.
+ * @desc: gpio descriptor whose state need to be set.
* @value: Non-zero for setting it HIGH otherise it will set to LOW.
*/
static void _gpio_set_open_drain_value(struct gpio_desc *desc, int value)
@@ -1942,14 +1980,14 @@ static void _gpio_set_open_drain_value(struct gpio_desc *desc, int value)
}
trace_gpio_direction(desc_to_gpio(desc), value, err);
if (err < 0)
- pr_err("%s: Error in set_value for open drain gpio%d err %d\n",
- __func__, desc_to_gpio(desc), err);
+ gpiod_err(desc,
+ "%s: Error in set_value for open drain err %d\n",
+ __func__, err);
}
/*
- * _gpio_set_open_source() - Set the open source gpio's value.
- * @gpio: Gpio whose state need to be set.
- * @chip: Gpio chip.
+ * _gpio_set_open_source_value() - Set the open source gpio's value.
+ * @desc: gpio descriptor whose state need to be set.
* @value: Non-zero for setting it HIGH otherise it will set to LOW.
*/
static void _gpio_set_open_source_value(struct gpio_desc *desc, int value)
@@ -1969,28 +2007,16 @@ static void _gpio_set_open_source_value(struct gpio_desc *desc, int value)
}
trace_gpio_direction(desc_to_gpio(desc), !value, err);
if (err < 0)
- pr_err("%s: Error in set_value for open source gpio%d err %d\n",
- __func__, desc_to_gpio(desc), err);
+ gpiod_err(desc,
+ "%s: Error in set_value for open source err %d\n",
+ __func__, err);
}
-/**
- * __gpio_set_value() - assign a gpio's value
- * @gpio: gpio whose value will be assigned
- * @value: value to assign
- * Context: any
- *
- * This is used directly or indirectly to implement gpio_set_value().
- * It invokes the associated gpio_chip.set() method.
- */
-static void gpiod_set_value(struct gpio_desc *desc, int value)
+static void _gpiod_set_raw_value(struct gpio_desc *desc, int value)
{
struct gpio_chip *chip;
- if (!desc)
- return;
chip = desc->chip;
- /* Should be using gpio_set_value_cansleep() */
- WARN_ON(chip->can_sleep);
trace_gpio_value(desc_to_gpio(desc), 0, value);
if (test_bit(FLAG_OPEN_DRAIN, &desc->flags))
_gpio_set_open_drain_value(desc, value);
@@ -2000,44 +2026,71 @@ static void gpiod_set_value(struct gpio_desc *desc, int value)
chip->set(chip, gpio_chip_hwgpio(desc), value);
}
-void __gpio_set_value(unsigned gpio, int value)
+/**
+ * gpiod_set_raw_value() - assign a gpio's raw value
+ * @desc: gpio whose value will be assigned
+ * @value: value to assign
+ *
+ * Set the raw value of the GPIO, i.e. the value of its physical line without
+ * regard for its ACTIVE_LOW status.
+ *
+ * This function should be called from contexts where we cannot sleep, and will
+ * complain if the GPIO chip functions potentially sleep.
+ */
+void gpiod_set_raw_value(struct gpio_desc *desc, int value)
{
- return gpiod_set_value(gpio_to_desc(gpio), value);
+ if (!desc)
+ return;
+ /* Should be using gpio_set_value_cansleep() */
+ WARN_ON(desc->chip->can_sleep);
+ _gpiod_set_raw_value(desc, value);
}
-EXPORT_SYMBOL_GPL(__gpio_set_value);
+EXPORT_SYMBOL_GPL(gpiod_set_raw_value);
/**
- * __gpio_cansleep() - report whether gpio value access will sleep
- * @gpio: gpio in question
- * Context: any
+ * gpiod_set_value() - assign a gpio's value
+ * @desc: gpio whose value will be assigned
+ * @value: value to assign
+ *
+ * Set the logical value of the GPIO, i.e. taking its ACTIVE_LOW status into
+ * account
*
- * This is used directly or indirectly to implement gpio_cansleep(). It
- * returns nonzero if access reading or writing the GPIO value can sleep.
+ * This function should be called from contexts where we cannot sleep, and will
+ * complain if the GPIO chip functions potentially sleep.
*/
-static int gpiod_cansleep(const struct gpio_desc *desc)
+void gpiod_set_value(struct gpio_desc *desc, int value)
{
if (!desc)
- return 0;
- /* only call this on GPIOs that are valid! */
- return desc->chip->can_sleep;
+ return;
+ /* Should be using gpio_set_value_cansleep() */
+ WARN_ON(desc->chip->can_sleep);
+ if (test_bit(FLAG_ACTIVE_LOW, &desc->flags))
+ value = !value;
+ _gpiod_set_raw_value(desc, value);
}
+EXPORT_SYMBOL_GPL(gpiod_set_value);
-int __gpio_cansleep(unsigned gpio)
+/**
+ * gpiod_cansleep() - report whether gpio value access may sleep
+ * @desc: gpio to check
+ *
+ */
+int gpiod_cansleep(const struct gpio_desc *desc)
{
- return gpiod_cansleep(gpio_to_desc(gpio));
+ if (!desc)
+ return 0;
+ return desc->chip->can_sleep;
}
-EXPORT_SYMBOL_GPL(__gpio_cansleep);
+EXPORT_SYMBOL_GPL(gpiod_cansleep);
/**
- * __gpio_to_irq() - return the IRQ corresponding to a GPIO
- * @gpio: gpio whose IRQ will be returned (already requested)
- * Context: any
+ * gpiod_to_irq() - return the IRQ corresponding to a GPIO
+ * @desc: gpio whose IRQ will be returned (already requested)
*
- * This is used directly or indirectly to implement gpio_to_irq().
- * It returns the number of the IRQ signaled by this (input) GPIO,
- * or a negative errno.
+ * Return the IRQ corresponding to the passed GPIO, or an error code in case of
+ * error.
*/
-static int gpiod_to_irq(const struct gpio_desc *desc)
+int gpiod_to_irq(const struct gpio_desc *desc)
{
struct gpio_chip *chip;
int offset;
@@ -2048,62 +2101,366 @@ static int gpiod_to_irq(const struct gpio_desc *desc)
offset = gpio_chip_hwgpio(desc);
return chip->to_irq ? chip->to_irq(chip, offset) : -ENXIO;
}
+EXPORT_SYMBOL_GPL(gpiod_to_irq);
+
+/**
+ * gpiod_lock_as_irq() - lock a GPIO to be used as IRQ
+ * @gpio: the GPIO line to lock as used for IRQ
+ *
+ * This is used directly by GPIO drivers that want to lock down
+ * a certain GPIO line to be used as IRQs, for example in the
+ * .to_irq() callback of their gpio_chip, or in the .irq_enable()
+ * of its irq_chip implementation if the GPIO is known from that
+ * code.
+ */
+int gpiod_lock_as_irq(struct gpio_desc *desc)
+{
+ if (!desc)
+ return -EINVAL;
+
+ if (test_bit(FLAG_IS_OUT, &desc->flags)) {
+ gpiod_err(desc,
+ "%s: tried to flag a GPIO set as output for IRQ\n",
+ __func__);
+ return -EIO;
+ }
+
+ set_bit(FLAG_USED_AS_IRQ, &desc->flags);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(gpiod_lock_as_irq);
+
+int gpio_lock_as_irq(struct gpio_chip *chip, unsigned int offset)
+{
+ return gpiod_lock_as_irq(gpiochip_offset_to_desc(chip, offset));
+}
+EXPORT_SYMBOL_GPL(gpio_lock_as_irq);
-int __gpio_to_irq(unsigned gpio)
+/**
+ * gpiod_unlock_as_irq() - unlock a GPIO used as IRQ
+ * @gpio: the GPIO line to unlock from IRQ usage
+ *
+ * This is used directly by GPIO drivers that want to indicate
+ * that a certain GPIO is no longer used exclusively for IRQ.
+ */
+void gpiod_unlock_as_irq(struct gpio_desc *desc)
{
- return gpiod_to_irq(gpio_to_desc(gpio));
+ if (!desc)
+ return;
+
+ clear_bit(FLAG_USED_AS_IRQ, &desc->flags);
}
-EXPORT_SYMBOL_GPL(__gpio_to_irq);
+EXPORT_SYMBOL_GPL(gpiod_unlock_as_irq);
+void gpio_unlock_as_irq(struct gpio_chip *chip, unsigned int offset)
+{
+ return gpiod_unlock_as_irq(gpiochip_offset_to_desc(chip, offset));
+}
+EXPORT_SYMBOL_GPL(gpio_unlock_as_irq);
-/* There's no value in making it easy to inline GPIO calls that may sleep.
- * Common examples include ones connected to I2C or SPI chips.
+/**
+ * gpiod_get_raw_value_cansleep() - return a gpio's raw value
+ * @desc: gpio whose value will be returned
+ *
+ * Return the GPIO's raw value, i.e. the value of the physical line disregarding
+ * its ACTIVE_LOW status.
+ *
+ * This function is to be called from contexts that can sleep.
*/
+int gpiod_get_raw_value_cansleep(const struct gpio_desc *desc)
+{
+ might_sleep_if(extra_checks);
+ if (!desc)
+ return 0;
+ return _gpiod_get_raw_value(desc);
+}
+EXPORT_SYMBOL_GPL(gpiod_get_raw_value_cansleep);
-static int gpiod_get_value_cansleep(const struct gpio_desc *desc)
+/**
+ * gpiod_get_value_cansleep() - return a gpio's value
+ * @desc: gpio whose value will be returned
+ *
+ * Return the GPIO's logical value, i.e. taking the ACTIVE_LOW status into
+ * account.
+ *
+ * This function is to be called from contexts that can sleep.
+ */
+int gpiod_get_value_cansleep(const struct gpio_desc *desc)
{
- struct gpio_chip *chip;
int value;
- int offset;
might_sleep_if(extra_checks);
if (!desc)
return 0;
- chip = desc->chip;
- offset = gpio_chip_hwgpio(desc);
- value = chip->get ? chip->get(chip, offset) : 0;
- trace_gpio_value(desc_to_gpio(desc), 1, value);
+
+ value = _gpiod_get_raw_value(desc);
+ if (test_bit(FLAG_ACTIVE_LOW, &desc->flags))
+ value = !value;
+
return value;
}
+EXPORT_SYMBOL_GPL(gpiod_get_value_cansleep);
-int gpio_get_value_cansleep(unsigned gpio)
+/**
+ * gpiod_set_raw_value_cansleep() - assign a gpio's raw value
+ * @desc: gpio whose value will be assigned
+ * @value: value to assign
+ *
+ * Set the raw value of the GPIO, i.e. the value of its physical line without
+ * regard for its ACTIVE_LOW status.
+ *
+ * This function is to be called from contexts that can sleep.
+ */
+void gpiod_set_raw_value_cansleep(struct gpio_desc *desc, int value)
{
- return gpiod_get_value_cansleep(gpio_to_desc(gpio));
+ might_sleep_if(extra_checks);
+ if (!desc)
+ return;
+ _gpiod_set_raw_value(desc, value);
}
-EXPORT_SYMBOL_GPL(gpio_get_value_cansleep);
+EXPORT_SYMBOL_GPL(gpiod_set_raw_value_cansleep);
-static void gpiod_set_value_cansleep(struct gpio_desc *desc, int value)
+/**
+ * gpiod_set_value_cansleep() - assign a gpio's value
+ * @desc: gpio whose value will be assigned
+ * @value: value to assign
+ *
+ * Set the logical value of the GPIO, i.e. taking its ACTIVE_LOW status into
+ * account
+ *
+ * This function is to be called from contexts that can sleep.
+ */
+void gpiod_set_value_cansleep(struct gpio_desc *desc, int value)
{
- struct gpio_chip *chip;
-
might_sleep_if(extra_checks);
if (!desc)
return;
- chip = desc->chip;
- trace_gpio_value(desc_to_gpio(desc), 0, value);
- if (test_bit(FLAG_OPEN_DRAIN, &desc->flags))
- _gpio_set_open_drain_value(desc, value);
- else if (test_bit(FLAG_OPEN_SOURCE, &desc->flags))
- _gpio_set_open_source_value(desc, value);
+
+ if (test_bit(FLAG_ACTIVE_LOW, &desc->flags))
+ value = !value;
+ _gpiod_set_raw_value(desc, value);
+}
+EXPORT_SYMBOL_GPL(gpiod_set_value_cansleep);
+
+/**
+ * gpiod_add_table() - register GPIO device consumers
+ * @table: array of consumers to register
+ * @num: number of consumers in table
+ */
+void gpiod_add_table(struct gpiod_lookup *table, size_t size)
+{
+ mutex_lock(&gpio_lookup_lock);
+
+ while (size--) {
+ list_add_tail(&table->list, &gpio_lookup_list);
+ table++;
+ }
+
+ mutex_unlock(&gpio_lookup_lock);
+}
+
+/*
+ * Caller must have a acquired gpio_lookup_lock
+ */
+static struct gpio_chip *find_chip_by_name(const char *name)
+{
+ struct gpio_chip *chip = NULL;
+
+ list_for_each_entry(chip, &gpio_lookup_list, list) {
+ if (chip->label == NULL)
+ continue;
+ if (!strcmp(chip->label, name))
+ break;
+ }
+
+ return chip;
+}
+
+#ifdef CONFIG_OF
+static struct gpio_desc *of_find_gpio(struct device *dev, const char *con_id,
+ unsigned int idx, unsigned long *flags)
+{
+ char prop_name[32]; /* 32 is max size of property name */
+ enum of_gpio_flags of_flags;
+ struct gpio_desc *desc;
+
+ if (con_id)
+ snprintf(prop_name, 32, "%s-gpios", con_id);
else
- chip->set(chip, gpio_chip_hwgpio(desc), value);
+ snprintf(prop_name, 32, "gpios");
+
+ desc = of_get_named_gpiod_flags(dev->of_node, prop_name, idx,
+ &of_flags);
+
+ if (IS_ERR(desc))
+ return desc;
+
+ if (of_flags & OF_GPIO_ACTIVE_LOW)
+ *flags |= GPIOF_ACTIVE_LOW;
+
+ return desc;
+}
+#else
+static struct gpio_desc *of_find_gpio(struct device *dev, const char *con_id,
+ unsigned int idx, unsigned long *flags)
+{
+ return ERR_PTR(-ENODEV);
+}
+#endif
+
+static struct gpio_desc *acpi_find_gpio(struct device *dev, const char *con_id,
+ unsigned int idx, unsigned long *flags)
+{
+ struct acpi_gpio_info info;
+ struct gpio_desc *desc;
+
+ desc = acpi_get_gpiod_by_index(dev, idx, &info);
+ if (IS_ERR(desc))
+ return desc;
+
+ if (info.gpioint && info.active_low)
+ *flags |= GPIOF_ACTIVE_LOW;
+
+ return desc;
+}
+
+static struct gpio_desc *gpiod_find(struct device *dev, const char *con_id,
+ unsigned int idx, unsigned long *flags)
+{
+ const char *dev_id = dev ? dev_name(dev) : NULL;
+ struct gpio_desc *desc = ERR_PTR(-ENODEV);
+ unsigned int match, best = 0;
+ struct gpiod_lookup *p;
+
+ mutex_lock(&gpio_lookup_lock);
+
+ list_for_each_entry(p, &gpio_lookup_list, list) {
+ match = 0;
+
+ if (p->dev_id) {
+ if (!dev_id || strcmp(p->dev_id, dev_id))
+ continue;
+
+ match += 2;
+ }
+
+ if (p->con_id) {
+ if (!con_id || strcmp(p->con_id, con_id))
+ continue;
+
+ match += 1;
+ }
+
+ if (p->idx != idx)
+ continue;
+
+ if (match > best) {
+ struct gpio_chip *chip;
+
+ chip = find_chip_by_name(p->chip_label);
+
+ if (!chip) {
+ dev_warn(dev, "cannot find GPIO chip %s\n",
+ p->chip_label);
+ continue;
+ }
+
+ if (chip->ngpio >= p->chip_hwnum) {
+ dev_warn(dev, "GPIO chip %s has %d GPIOs\n",
+ chip->label, chip->ngpio);
+ continue;
+ }
+
+ desc = gpio_to_desc(chip->base + p->chip_hwnum);
+ *flags = p->flags;
+
+ if (match != 3)
+ best = match;
+ else
+ break;
+ }
+ }
+
+ mutex_unlock(&gpio_lookup_lock);
+
+ return desc;
+}
+
+/**
+ * gpio_get - obtain a GPIO for a given GPIO function
+ * @dev: GPIO consumer
+ * @con_id: function within the GPIO consumer
+ *
+ * Return the GPIO descriptor corresponding to the function con_id of device
+ * dev, or an IS_ERR() condition if an error occured.
+ */
+struct gpio_desc *__must_check gpiod_get(struct device *dev, const char *con_id)
+{
+ return gpiod_get_index(dev, con_id, 0);
+}
+EXPORT_SYMBOL_GPL(gpiod_get);
+
+/**
+ * gpiod_get_index - obtain a GPIO from a multi-index GPIO function
+ * @dev: GPIO consumer
+ * @con_id: function within the GPIO consumer
+ * @idx: index of the GPIO to obtain in the consumer
+ *
+ * This variant of gpiod_get() allows to access GPIOs other than the first
+ * defined one for functions that define several GPIOs.
+ *
+ * Return a valid GPIO descriptor, or an IS_ERR() condition in case of error.
+ */
+struct gpio_desc *__must_check gpiod_get_index(struct device *dev,
+ const char *con_id,
+ unsigned int idx)
+{
+ struct gpio_desc *desc;
+ int status;
+ unsigned long flags = 0;
+
+ dev_dbg(dev, "GPIO lookup for consumer %s\n", con_id);
+
+ /* Using device tree? */
+ if (IS_ENABLED(CONFIG_OF) && dev && dev->of_node) {
+ dev_dbg(dev, "using device tree for GPIO lookup\n");
+ desc = of_find_gpio(dev, con_id, idx, &flags);
+ } else if (IS_ENABLED(CONFIG_ACPI) && dev && ACPI_HANDLE(dev)) {
+ dev_dbg(dev, "using ACPI for GPIO lookup\n");
+ desc = acpi_find_gpio(dev, con_id, idx, &flags);
+ } else {
+ dev_dbg(dev, "using lookup tables for GPIO lookup");
+ desc = gpiod_find(dev, con_id, idx, &flags);
+ }
+
+ if (IS_ERR(desc)) {
+ dev_warn(dev, "lookup for GPIO %s failed\n", con_id);
+ return desc;
+ }
+
+ status = gpiod_request(desc, con_id);
+
+ if (status < 0)
+ return ERR_PTR(status);
+
+ if (flags & GPIOF_ACTIVE_LOW)
+ set_bit(FLAG_ACTIVE_LOW, &desc->flags);
+
+ return desc;
}
+EXPORT_SYMBOL_GPL(gpiod_get_index);
-void gpio_set_value_cansleep(unsigned gpio, int value)
+/**
+ * gpiod_put - dispose of a GPIO descriptor
+ * @desc: GPIO descriptor to dispose of
+ *
+ * No descriptor can be used after gpiod_put() has been called on it.
+ */
+void gpiod_put(struct gpio_desc *desc)
{
- return gpiod_set_value_cansleep(gpio_to_desc(gpio), value);
+ gpiod_free(desc);
}
-EXPORT_SYMBOL_GPL(gpio_set_value_cansleep);
+EXPORT_SYMBOL_GPL(gpiod_put);
#ifdef CONFIG_DEBUG_FS
@@ -2113,6 +2470,7 @@ static void gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip)
unsigned gpio = chip->base;
struct gpio_desc *gdesc = &chip->desc[0];
int is_out;
+ int is_irq;
for (i = 0; i < chip->ngpio; i++, gpio++, gdesc++) {
if (!test_bit(FLAG_REQUESTED, &gdesc->flags))
@@ -2120,12 +2478,14 @@ static void gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip)
gpiod_get_direction(gdesc);
is_out = test_bit(FLAG_IS_OUT, &gdesc->flags);
- seq_printf(s, " gpio-%-3d (%-20.20s) %s %s",
+ is_irq = test_bit(FLAG_USED_AS_IRQ, &gdesc->flags);
+ seq_printf(s, " gpio-%-3d (%-20.20s) %s %s %s",
gpio, gdesc->label,
is_out ? "out" : "in ",
chip->get
? (chip->get(chip, i) ? "hi" : "lo")
- : "? ");
+ : "? ",
+ is_irq ? "IRQ" : " ");
seq_printf(s, "\n");
}
}
diff --git a/drivers/input/misc/ixp4xx-beeper.c b/drivers/input/misc/ixp4xx-beeper.c
index f34beb2..17ccba8 100644
--- a/drivers/input/misc/ixp4xx-beeper.c
+++ b/drivers/input/misc/ixp4xx-beeper.c
@@ -20,6 +20,7 @@
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
+#include <linux/gpio.h>
#include <mach/hardware.h>
MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
@@ -35,15 +36,12 @@ static void ixp4xx_spkr_control(unsigned int pin, unsigned int count)
spin_lock_irqsave(&beep_lock, flags);
- if (count) {
- gpio_line_config(pin, IXP4XX_GPIO_OUT);
- gpio_line_set(pin, IXP4XX_GPIO_LOW);
-
+ if (count) {
+ gpio_direction_output(pin, 0);
*IXP4XX_OSRT2 = (count & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE;
} else {
- gpio_line_config(pin, IXP4XX_GPIO_IN);
- gpio_line_set(pin, IXP4XX_GPIO_HIGH);
-
+ gpio_direction_output(pin, 1);
+ gpio_direction_input(pin);
*IXP4XX_OSRT2 = 0;
}
@@ -78,11 +76,13 @@ static int ixp4xx_spkr_event(struct input_dev *dev, unsigned int type, unsigned
static irqreturn_t ixp4xx_spkr_interrupt(int irq, void *dev_id)
{
+ unsigned int pin = (unsigned int) dev_id;
+
/* clear interrupt */
*IXP4XX_OSST = IXP4XX_OSST_TIMER_2_PEND;
/* flip the beeper output */
- *IXP4XX_GPIO_GPOUTR ^= (1 << (unsigned int) dev_id);
+ gpio_set_value(pin, !gpio_get_value(pin));
return IRQ_HANDLED;
}
@@ -110,11 +110,15 @@ static int ixp4xx_spkr_probe(struct platform_device *dev)
input_dev->sndbit[0] = BIT_MASK(SND_BELL) | BIT_MASK(SND_TONE);
input_dev->event = ixp4xx_spkr_event;
+ err = gpio_request(dev->id, "ixp4-beeper");
+ if (err)
+ goto err_free_device;
+
err = request_irq(IRQ_IXP4XX_TIMER2, &ixp4xx_spkr_interrupt,
IRQF_NO_SUSPEND, "ixp4xx-beeper",
(void *) dev->id);
if (err)
- goto err_free_device;
+ goto err_free_gpio;
err = input_register_device(input_dev);
if (err)
@@ -126,6 +130,8 @@ static int ixp4xx_spkr_probe(struct platform_device *dev)
err_free_irq:
free_irq(IRQ_IXP4XX_TIMER2, (void *)dev->id);
+ err_free_gpio:
+ gpio_free(dev->id);
err_free_device:
input_free_device(input_dev);
@@ -144,6 +150,7 @@ static int ixp4xx_spkr_remove(struct platform_device *dev)
ixp4xx_spkr_control(pin, 0);
free_irq(IRQ_IXP4XX_TIMER2, (void *)dev->id);
+ gpio_free(dev->id);
return 0;
}
diff --git a/drivers/pinctrl/pinctrl-coh901.c b/drivers/pinctrl/pinctrl-coh901.c
index f22a219..162ac0d 100644
--- a/drivers/pinctrl/pinctrl-coh901.c
+++ b/drivers/pinctrl/pinctrl-coh901.c
@@ -529,6 +529,10 @@ static void u300_gpio_irq_enable(struct irq_data *d)
dev_dbg(gpio->dev, "enable IRQ for hwirq %lu on port %s, offset %d\n",
d->hwirq, port->name, offset);
+ if (gpio_lock_as_irq(&gpio->chip, d->hwirq))
+ dev_err(gpio->dev,
+ "unable to lock HW IRQ %lu for IRQ\n",
+ d->hwirq);
local_irq_save(flags);
val = readl(U300_PIN_REG(offset, ien));
writel(val | U300_PIN_BIT(offset), U300_PIN_REG(offset, ien));
@@ -547,6 +551,7 @@ static void u300_gpio_irq_disable(struct irq_data *d)
val = readl(U300_PIN_REG(offset, ien));
writel(val & ~U300_PIN_BIT(offset), U300_PIN_REG(offset, ien));
local_irq_restore(flags);
+ gpio_unlock_as_irq(&gpio->chip, d->hwirq);
}
static struct irq_chip u300_gpio_irqchip = {
diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c
index d7c3ae3..7111c3b 100644
--- a/drivers/pinctrl/pinctrl-nomadik.c
+++ b/drivers/pinctrl/pinctrl-nomadik.c
@@ -634,6 +634,10 @@ static unsigned int nmk_gpio_irq_startup(struct irq_data *d)
{
struct nmk_gpio_chip *nmk_chip = irq_data_get_irq_chip_data(d);
+ if (gpio_lock_as_irq(&nmk_chip->chip, d->hwirq))
+ dev_err(nmk_chip->chip.dev,
+ "unable to lock HW IRQ %lu for IRQ\n",
+ d->hwirq);
clk_enable(nmk_chip->clk);
nmk_gpio_irq_unmask(d);
return 0;
@@ -645,6 +649,7 @@ static void nmk_gpio_irq_shutdown(struct irq_data *d)
nmk_gpio_irq_mask(d);
clk_disable(nmk_chip->clk);
+ gpio_unlock_as_irq(&nmk_chip->chip, d->hwirq);
}
static struct irq_chip nmk_gpio_irq_chip = {
diff --git a/drivers/ptp/ptp_ixp46x.c b/drivers/ptp/ptp_ixp46x.c
index d49b851..4a08727 100644
--- a/drivers/ptp/ptp_ixp46x.c
+++ b/drivers/ptp/ptp_ixp46x.c
@@ -259,8 +259,15 @@ static struct ixp_clock ixp_clock;
static int setup_interrupt(int gpio)
{
int irq;
+ int err;
- gpio_line_config(gpio, IXP4XX_GPIO_IN);
+ err = gpio_request(gpio, "ixp4-ptp");
+ if (err)
+ return err;
+
+ err = gpio_direction_input(gpio);
+ if (err)
+ return err;
irq = gpio_to_irq(gpio);
diff --git a/drivers/staging/media/lirc/lirc_serial.c b/drivers/staging/media/lirc/lirc_serial.c
index af08e67..f6bc4c9 100644
--- a/drivers/staging/media/lirc/lirc_serial.c
+++ b/drivers/staging/media/lirc/lirc_serial.c
@@ -67,7 +67,7 @@
#include <linux/delay.h>
#include <linux/poll.h>
#include <linux/platform_device.h>
-
+#include <linux/gpio.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/fcntl.h>
@@ -321,7 +321,7 @@ static void on(void)
* status LED and ground
*/
if (type == LIRC_NSLU2) {
- gpio_line_set(NSLU2_LED_GRN, IXP4XX_GPIO_LOW);
+ gpio_set_value(NSLU2_LED_GRN, 0);
return;
}
#endif
@@ -335,7 +335,7 @@ static void off(void)
{
#ifdef CONFIG_LIRC_SERIAL_NSLU2
if (type == LIRC_NSLU2) {
- gpio_line_set(NSLU2_LED_GRN, IXP4XX_GPIO_HIGH);
+ gpio_set_value(NSLU2_LED_GRN, 1);
return;
}
#endif
@@ -839,6 +839,16 @@ static int lirc_serial_probe(struct platform_device *dev)
{
int i, nlow, nhigh, result;
+#ifdef CONFIG_LIRC_SERIAL_NSLU2
+ /* This GPIO is used for a LED on the NSLU2 */
+ result = devm_gpio_request(dev, NSLU2_LED_GRN, "lirc-serial");
+ if (result)
+ return result;
+ result = gpio_direction_output(NSLU2_LED_GRN, 0);
+ if (result)
+ return result;
+#endif
+
result = request_irq(irq, irq_handler,
(share_irq ? IRQF_SHARED : 0),
LIRC_DRIVER_NAME, (void *)&hardware);
diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
index 523f405..a5f56a0 100644
--- a/include/asm-generic/gpio.h
+++ b/include/asm-generic/gpio.h
@@ -10,6 +10,8 @@
#ifdef CONFIG_GPIOLIB
#include <linux/compiler.h>
+#include <linux/gpio/driver.h>
+#include <linux/gpio/consumer.h>
/* Platforms may implement their GPIO interface with library code,
* at a small performance cost for non-inlined operations and some
@@ -49,122 +51,11 @@ struct module;
struct device_node;
struct gpio_desc;
-/**
- * struct gpio_chip - abstract a GPIO controller
- * @label: for diagnostics
- * @dev: optional device providing the GPIOs
- * @owner: helps prevent removal of modules exporting active GPIOs
- * @list: links gpio_chips together for traversal
- * @request: optional hook for chip-specific activation, such as
- * enabling module power and clock; may sleep
- * @free: optional hook for chip-specific deactivation, such as
- * disabling module power and clock; may sleep
- * @get_direction: returns direction for signal "offset", 0=out, 1=in,
- * (same as GPIOF_DIR_XXX), or negative error
- * @direction_input: configures signal "offset" as input, or returns error
- * @get: returns value for signal "offset"; for output signals this
- * returns either the value actually sensed, or zero
- * @direction_output: configures signal "offset" as output, or returns error
- * @set_debounce: optional hook for setting debounce time for specified gpio in
- * interrupt triggered gpio chips
- * @set: assigns output value for signal "offset"
- * @to_irq: optional hook supporting non-static gpio_to_irq() mappings;
- * implementation may not sleep
- * @dbg_show: optional routine to show contents in debugfs; default code
- * will be used when this is omitted, but custom code can show extra
- * state (such as pullup/pulldown configuration).
- * @base: identifies the first GPIO number handled by this chip; or, if
- * negative during registration, requests dynamic ID allocation.
- * @ngpio: the number of GPIOs handled by this controller; the last GPIO
- * handled is (base + ngpio - 1).
- * @desc: array of ngpio descriptors. Private.
- * @can_sleep: flag must be set iff get()/set() methods sleep, as they
- * must while accessing GPIO expander chips over I2C or SPI
- * @names: if set, must be an array of strings to use as alternative
- * names for the GPIOs in this chip. Any entry in the array
- * may be NULL if there is no alias for the GPIO, however the
- * array must be @ngpio entries long. A name can include a single printk
- * format specifier for an unsigned int. It is substituted by the actual
- * number of the gpio.
- *
- * A gpio_chip can help platforms abstract various sources of GPIOs so
- * they can all be accessed through a common programing interface.
- * Example sources would be SOC controllers, FPGAs, multifunction
- * chips, dedicated GPIO expanders, and so on.
- *
- * Each chip controls a number of signals, identified in method calls
- * by "offset" values in the range 0..(@ngpio - 1). When those signals
- * are referenced through calls like gpio_get_value(gpio), the offset
- * is calculated by subtracting @base from the gpio number.
- */
-struct gpio_chip {
- const char *label;
- struct device *dev;
- struct module *owner;
- struct list_head list;
-
- int (*request)(struct gpio_chip *chip,
- unsigned offset);
- void (*free)(struct gpio_chip *chip,
- unsigned offset);
- int (*get_direction)(struct gpio_chip *chip,
- unsigned offset);
- int (*direction_input)(struct gpio_chip *chip,
- unsigned offset);
- int (*get)(struct gpio_chip *chip,
- unsigned offset);
- int (*direction_output)(struct gpio_chip *chip,
- unsigned offset, int value);
- int (*set_debounce)(struct gpio_chip *chip,
- unsigned offset, unsigned debounce);
-
- void (*set)(struct gpio_chip *chip,
- unsigned offset, int value);
-
- int (*to_irq)(struct gpio_chip *chip,
- unsigned offset);
-
- void (*dbg_show)(struct seq_file *s,
- struct gpio_chip *chip);
- int base;
- u16 ngpio;
- struct gpio_desc *desc;
- const char *const *names;
- unsigned can_sleep:1;
- unsigned exported:1;
-
-#if defined(CONFIG_OF_GPIO)
- /*
- * If CONFIG_OF is enabled, then all GPIO controllers described in the
- * device tree automatically may have an OF translation
- */
- struct device_node *of_node;
- int of_gpio_n_cells;
- int (*of_xlate)(struct gpio_chip *gc,
- const struct of_phandle_args *gpiospec, u32 *flags);
-#endif
-#ifdef CONFIG_PINCTRL
- /*
- * If CONFIG_PINCTRL is enabled, then gpio controllers can optionally
- * describe the actual pin range which they serve in an SoC. This
- * information would be used by pinctrl subsystem to configure
- * corresponding pins for gpio usage.
- */
- struct list_head pin_ranges;
-#endif
-};
-
-extern const char *gpiochip_is_requested(struct gpio_chip *chip,
- unsigned offset);
-extern struct gpio_chip *gpio_to_chip(unsigned gpio);
-
-/* add/remove chips */
-extern int gpiochip_add(struct gpio_chip *chip);
-extern int __must_check gpiochip_remove(struct gpio_chip *chip);
-extern struct gpio_chip *gpiochip_find(void *data,
- int (*match)(struct gpio_chip *chip,
- void *data));
-
+/* caller holds gpio_lock *OR* gpio is marked as requested */
+static inline struct gpio_chip *gpio_to_chip(unsigned gpio)
+{
+ return gpiod_to_chip(gpio_to_desc(gpio));
+}
/* Always use the library code for GPIO management calls,
* or when sleeping may be involved.
@@ -172,43 +63,84 @@ extern struct gpio_chip *gpiochip_find(void *data,
extern int gpio_request(unsigned gpio, const char *label);
extern void gpio_free(unsigned gpio);
-extern int gpio_direction_input(unsigned gpio);
-extern int gpio_direction_output(unsigned gpio, int value);
+static inline int gpio_direction_input(unsigned gpio)
+{
+ return gpiod_direction_input(gpio_to_desc(gpio));
+}
+static inline int gpio_direction_output(unsigned gpio, int value)
+{
+ return gpiod_direction_output(gpio_to_desc(gpio), value);
+}
-extern int gpio_set_debounce(unsigned gpio, unsigned debounce);
+static inline int gpio_set_debounce(unsigned gpio, unsigned debounce)
+{
+ return gpiod_set_debounce(gpio_to_desc(gpio), debounce);
+}
-extern int gpio_get_value_cansleep(unsigned gpio);
-extern void gpio_set_value_cansleep(unsigned gpio, int value);
+static inline int gpio_get_value_cansleep(unsigned gpio)
+{
+ return gpiod_get_raw_value_cansleep(gpio_to_desc(gpio));
+}
+static inline void gpio_set_value_cansleep(unsigned gpio, int value)
+{
+ return gpiod_set_raw_value_cansleep(gpio_to_desc(gpio), value);
+}
/* A platform's <asm/gpio.h> code may want to inline the I/O calls when
* the GPIO is constant and refers to some always-present controller,
* giving direct access to chip registers and tight bitbanging loops.
*/
-extern int __gpio_get_value(unsigned gpio);
-extern void __gpio_set_value(unsigned gpio, int value);
+static inline int __gpio_get_value(unsigned gpio)
+{
+ return gpiod_get_raw_value(gpio_to_desc(gpio));
+}
+static inline void __gpio_set_value(unsigned gpio, int value)
+{
+ return gpiod_set_raw_value(gpio_to_desc(gpio), value);
+}
+
+static inline int __gpio_cansleep(unsigned gpio)
+{
+ return gpiod_cansleep(gpio_to_desc(gpio));
+}
-extern int __gpio_cansleep(unsigned gpio);
+static inline int __gpio_to_irq(unsigned gpio)
+{
+ return gpiod_to_irq(gpio_to_desc(gpio));
+}
-extern int __gpio_to_irq(unsigned gpio);
+extern int gpio_lock_as_irq(struct gpio_chip *chip, unsigned int offset);
+extern void gpio_unlock_as_irq(struct gpio_chip *chip, unsigned int offset);
extern int gpio_request_one(unsigned gpio, unsigned long flags, const char *label);
extern int gpio_request_array(const struct gpio *array, size_t num);
extern void gpio_free_array(const struct gpio *array, size_t num);
-#ifdef CONFIG_GPIO_SYSFS
-
/*
* A sysfs interface can be exported by individual drivers if they want,
* but more typically is configured entirely from userspace.
*/
-extern int gpio_export(unsigned gpio, bool direction_may_change);
-extern int gpio_export_link(struct device *dev, const char *name,
- unsigned gpio);
-extern int gpio_sysfs_set_active_low(unsigned gpio, int value);
-extern void gpio_unexport(unsigned gpio);
+static inline int gpio_export(unsigned gpio, bool direction_may_change)
+{
+ return gpiod_export(gpio_to_desc(gpio), direction_may_change);
+}
-#endif /* CONFIG_GPIO_SYSFS */
+static inline int gpio_export_link(struct device *dev, const char *name,
+ unsigned gpio)
+{
+ return gpiod_export_link(dev, name, gpio_to_desc(gpio));
+}
+
+static inline int gpio_sysfs_set_active_low(unsigned gpio, int value)
+{
+ return gpiod_sysfs_set_active_low(gpio_to_desc(gpio), value);
+}
+
+static inline void gpio_unexport(unsigned gpio)
+{
+ gpiod_unexport(gpio_to_desc(gpio));
+}
#ifdef CONFIG_PINCTRL
@@ -288,31 +220,4 @@ static inline void gpio_set_value_cansleep(unsigned gpio, int value)
#endif /* !CONFIG_GPIOLIB */
-#ifndef CONFIG_GPIO_SYSFS
-
-struct device;
-
-/* sysfs support is only available with gpiolib, where it's optional */
-
-static inline int gpio_export(unsigned gpio, bool direction_may_change)
-{
- return -ENOSYS;
-}
-
-static inline int gpio_export_link(struct device *dev, const char *name,
- unsigned gpio)
-{
- return -ENOSYS;
-}
-
-static inline int gpio_sysfs_set_active_low(unsigned gpio, int value)
-{
- return -ENOSYS;
-}
-
-static inline void gpio_unexport(unsigned gpio)
-{
-}
-#endif /* CONFIG_GPIO_SYSFS */
-
#endif /* _ASM_GENERIC_GPIO_H */
diff --git a/include/linux/acpi_gpio.h b/include/linux/acpi_gpio.h
index 4c120a1..d875bc3 100644
--- a/include/linux/acpi_gpio.h
+++ b/include/linux/acpi_gpio.h
@@ -2,36 +2,35 @@
#define _LINUX_ACPI_GPIO_H_
#include <linux/device.h>
+#include <linux/err.h>
#include <linux/errno.h>
#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
/**
* struct acpi_gpio_info - ACPI GPIO specific information
* @gpioint: if %true this GPIO is of type GpioInt otherwise type is GpioIo
+ * @active_low: in case of @gpioint, the pin is active low
*/
struct acpi_gpio_info {
bool gpioint;
+ bool active_low;
};
#ifdef CONFIG_GPIO_ACPI
-int acpi_get_gpio(char *path, int pin);
-int acpi_get_gpio_by_index(struct device *dev, int index,
- struct acpi_gpio_info *info);
+struct gpio_desc *acpi_get_gpiod_by_index(struct device *dev, int index,
+ struct acpi_gpio_info *info);
void acpi_gpiochip_request_interrupts(struct gpio_chip *chip);
void acpi_gpiochip_free_interrupts(struct gpio_chip *chip);
#else /* CONFIG_GPIO_ACPI */
-static inline int acpi_get_gpio(char *path, int pin)
+static inline struct gpio_desc *
+acpi_get_gpiod_by_index(struct device *dev, int index,
+ struct acpi_gpio_info *info)
{
- return -ENODEV;
-}
-
-static inline int acpi_get_gpio_by_index(struct device *dev, int index,
- struct acpi_gpio_info *info)
-{
- return -ENODEV;
+ return ERR_PTR(-ENOSYS);
}
static inline void acpi_gpiochip_request_interrupts(struct gpio_chip *chip) { }
@@ -39,4 +38,14 @@ static inline void acpi_gpiochip_free_interrupts(struct gpio_chip *chip) { }
#endif /* CONFIG_GPIO_ACPI */
+static inline int acpi_get_gpio_by_index(struct device *dev, int index,
+ struct acpi_gpio_info *info)
+{
+ struct gpio_desc *desc = acpi_get_gpiod_by_index(dev, index, info);
+
+ if (IS_ERR(desc))
+ return PTR_ERR(desc);
+ return desc_to_gpio(desc);
+}
+
#endif /* _LINUX_ACPI_GPIO_H_ */
diff --git a/include/linux/gpio.h b/include/linux/gpio.h
index b8d0e53..13dfd24 100644
--- a/include/linux/gpio.h
+++ b/include/linux/gpio.h
@@ -16,14 +16,17 @@
#define GPIOF_OUT_INIT_LOW (GPIOF_DIR_OUT | GPIOF_INIT_LOW)
#define GPIOF_OUT_INIT_HIGH (GPIOF_DIR_OUT | GPIOF_INIT_HIGH)
+/* Gpio pin is active-low */
+#define GPIOF_ACTIVE_LOW (1 << 2)
+
/* Gpio pin is open drain */
-#define GPIOF_OPEN_DRAIN (1 << 2)
+#define GPIOF_OPEN_DRAIN (1 << 3)
/* Gpio pin is open source */
-#define GPIOF_OPEN_SOURCE (1 << 3)
+#define GPIOF_OPEN_SOURCE (1 << 4)
-#define GPIOF_EXPORT (1 << 4)
-#define GPIOF_EXPORT_CHANGEABLE (1 << 5)
+#define GPIOF_EXPORT (1 << 5)
+#define GPIOF_EXPORT_CHANGEABLE (1 << 6)
#define GPIOF_EXPORT_DIR_FIXED (GPIOF_EXPORT)
#define GPIOF_EXPORT_DIR_CHANGEABLE (GPIOF_EXPORT | GPIOF_EXPORT_CHANGEABLE)
@@ -74,6 +77,15 @@ static inline int irq_to_gpio(unsigned int irq)
#endif /* ! CONFIG_ARCH_HAVE_CUSTOM_GPIO_H */
+/* CONFIG_GPIOLIB: bindings for managed devices that want to request gpios */
+
+struct device;
+
+int devm_gpio_request(struct device *dev, unsigned gpio, const char *label);
+int devm_gpio_request_one(struct device *dev, unsigned gpio,
+ unsigned long flags, const char *label);
+void devm_gpio_free(struct device *dev, unsigned int gpio);
+
#else /* ! CONFIG_GPIOLIB */
#include <linux/kernel.h>
@@ -205,6 +217,18 @@ static inline int gpio_to_irq(unsigned gpio)
return -EINVAL;
}
+static inline int gpio_lock_as_irq(struct gpio_chip *chip, unsigned int offset)
+{
+ WARN_ON(1);
+ return -EINVAL;
+}
+
+static inline void gpio_unlock_as_irq(struct gpio_chip *chip,
+ unsigned int offset)
+{
+ WARN_ON(1);
+}
+
static inline int irq_to_gpio(unsigned irq)
{
/* irq can never have been returned from gpio_to_irq() */
@@ -236,14 +260,25 @@ gpiochip_remove_pin_ranges(struct gpio_chip *chip)
WARN_ON(1);
}
-#endif /* ! CONFIG_GPIOLIB */
+static inline int devm_gpio_request(struct device *dev, unsigned gpio,
+ const char *label)
+{
+ WARN_ON(1);
+ return -EINVAL;
+}
-struct device;
+static inline int devm_gpio_request_one(struct device *dev, unsigned gpio,
+ unsigned long flags, const char *label)
+{
+ WARN_ON(1);
+ return -EINVAL;
+}
-/* bindings for managed devices that want to request gpios */
-int devm_gpio_request(struct device *dev, unsigned gpio, const char *label);
-int devm_gpio_request_one(struct device *dev, unsigned gpio,
- unsigned long flags, const char *label);
-void devm_gpio_free(struct device *dev, unsigned int gpio);
+static inline void devm_gpio_free(struct device *dev, unsigned int gpio)
+{
+ WARN_ON(1);
+}
+
+#endif /* ! CONFIG_GPIOLIB */
#endif /* __LINUX_GPIO_H */
diff --git a/include/linux/gpio/consumer.h b/include/linux/gpio/consumer.h
new file mode 100644
index 0000000..4d34dbb
--- /dev/null
+++ b/include/linux/gpio/consumer.h
@@ -0,0 +1,253 @@
+#ifndef __LINUX_GPIO_CONSUMER_H
+#define __LINUX_GPIO_CONSUMER_H
+
+#include <linux/err.h>
+#include <linux/kernel.h>
+
+#ifdef CONFIG_GPIOLIB
+
+struct device;
+struct gpio_chip;
+
+/**
+ * Opaque descriptor for a GPIO. These are obtained using gpiod_get() and are
+ * preferable to the old integer-based handles.
+ *
+ * Contrary to integers, a pointer to a gpio_desc is guaranteed to be valid
+ * until the GPIO is released.
+ */
+struct gpio_desc;
+
+/* Acquire and dispose GPIOs */
+struct gpio_desc *__must_check gpiod_get(struct device *dev,
+ const char *con_id);
+struct gpio_desc *__must_check gpiod_get_index(struct device *dev,
+ const char *con_id,
+ unsigned int idx);
+void gpiod_put(struct gpio_desc *desc);
+
+struct gpio_desc *__must_check devm_gpiod_get(struct device *dev,
+ const char *con_id);
+struct gpio_desc *__must_check devm_gpiod_get_index(struct device *dev,
+ const char *con_id,
+ unsigned int idx);
+void devm_gpiod_put(struct device *dev, struct gpio_desc *desc);
+
+int gpiod_get_direction(const struct gpio_desc *desc);
+int gpiod_direction_input(struct gpio_desc *desc);
+int gpiod_direction_output(struct gpio_desc *desc, int value);
+
+/* Value get/set from non-sleeping context */
+int gpiod_get_value(const struct gpio_desc *desc);
+void gpiod_set_value(struct gpio_desc *desc, int value);
+int gpiod_get_raw_value(const struct gpio_desc *desc);
+void gpiod_set_raw_value(struct gpio_desc *desc, int value);
+
+/* Value get/set from sleeping context */
+int gpiod_get_value_cansleep(const struct gpio_desc *desc);
+void gpiod_set_value_cansleep(struct gpio_desc *desc, int value);
+int gpiod_get_raw_value_cansleep(const struct gpio_desc *desc);
+void gpiod_set_raw_value_cansleep(struct gpio_desc *desc, int value);
+
+int gpiod_set_debounce(struct gpio_desc *desc, unsigned debounce);
+
+int gpiod_is_active_low(const struct gpio_desc *desc);
+int gpiod_cansleep(const struct gpio_desc *desc);
+
+int gpiod_to_irq(const struct gpio_desc *desc);
+
+/* Convert between the old gpio_ and new gpiod_ interfaces */
+struct gpio_desc *gpio_to_desc(unsigned gpio);
+int desc_to_gpio(const struct gpio_desc *desc);
+struct gpio_chip *gpiod_to_chip(const struct gpio_desc *desc);
+
+#else /* CONFIG_GPIOLIB */
+
+static inline struct gpio_desc *__must_check gpiod_get(struct device *dev,
+ const char *con_id)
+{
+ return ERR_PTR(-ENOSYS);
+}
+static inline struct gpio_desc *__must_check gpiod_get_index(struct device *dev,
+ const char *con_id,
+ unsigned int idx)
+{
+ return ERR_PTR(-ENOSYS);
+}
+static inline void gpiod_put(struct gpio_desc *desc)
+{
+ might_sleep();
+
+ /* GPIO can never have been requested */
+ WARN_ON(1);
+}
+
+static inline struct gpio_desc *__must_check devm_gpiod_get(struct device *dev,
+ const char *con_id)
+{
+ return ERR_PTR(-ENOSYS);
+}
+static inline
+struct gpio_desc *__must_check devm_gpiod_get_index(struct device *dev,
+ const char *con_id,
+ unsigned int idx)
+{
+ return ERR_PTR(-ENOSYS);
+}
+static inline void devm_gpiod_put(struct device *dev, struct gpio_desc *desc)
+{
+ might_sleep();
+
+ /* GPIO can never have been requested */
+ WARN_ON(1);
+}
+
+
+static inline int gpiod_get_direction(const struct gpio_desc *desc)
+{
+ /* GPIO can never have been requested */
+ WARN_ON(1);
+ return -ENOSYS;
+}
+static inline int gpiod_direction_input(struct gpio_desc *desc)
+{
+ /* GPIO can never have been requested */
+ WARN_ON(1);
+ return -ENOSYS;
+}
+static inline int gpiod_direction_output(struct gpio_desc *desc, int value)
+{
+ /* GPIO can never have been requested */
+ WARN_ON(1);
+ return -ENOSYS;
+}
+
+
+static inline int gpiod_get_value(const struct gpio_desc *desc)
+{
+ /* GPIO can never have been requested */
+ WARN_ON(1);
+ return 0;
+}
+static inline void gpiod_set_value(struct gpio_desc *desc, int value)
+{
+ /* GPIO can never have been requested */
+ WARN_ON(1);
+}
+static inline int gpiod_get_raw_value(const struct gpio_desc *desc)
+{
+ /* GPIO can never have been requested */
+ WARN_ON(1);
+ return 0;
+}
+static inline void gpiod_set_raw_value(struct gpio_desc *desc, int value)
+{
+ /* GPIO can never have been requested */
+ WARN_ON(1);
+}
+
+static inline int gpiod_get_value_cansleep(const struct gpio_desc *desc)
+{
+ /* GPIO can never have been requested */
+ WARN_ON(1);
+ return 0;
+}
+static inline void gpiod_set_value_cansleep(struct gpio_desc *desc, int value)
+{
+ /* GPIO can never have been requested */
+ WARN_ON(1);
+}
+static inline int gpiod_get_raw_value_cansleep(const struct gpio_desc *desc)
+{
+ /* GPIO can never have been requested */
+ WARN_ON(1);
+ return 0;
+}
+static inline void gpiod_set_raw_value_cansleep(struct gpio_desc *desc,
+ int value)
+{
+ /* GPIO can never have been requested */
+ WARN_ON(1);
+}
+
+static inline int gpiod_set_debounce(struct gpio_desc *desc, unsigned debounce)
+{
+ /* GPIO can never have been requested */
+ WARN_ON(1);
+ return -ENOSYS;
+}
+
+static inline int gpiod_is_active_low(const struct gpio_desc *desc)
+{
+ /* GPIO can never have been requested */
+ WARN_ON(1);
+ return 0;
+}
+static inline int gpiod_cansleep(const struct gpio_desc *desc)
+{
+ /* GPIO can never have been requested */
+ WARN_ON(1);
+ return 0;
+}
+
+static inline int gpiod_to_irq(const struct gpio_desc *desc)
+{
+ /* GPIO can never have been requested */
+ WARN_ON(1);
+ return -EINVAL;
+}
+
+static inline struct gpio_desc *gpio_to_desc(unsigned gpio)
+{
+ return ERR_PTR(-EINVAL);
+}
+static inline int desc_to_gpio(const struct gpio_desc *desc)
+{
+ /* GPIO can never have been requested */
+ WARN_ON(1);
+ return -EINVAL;
+}
+static inline struct gpio_chip *gpiod_to_chip(const struct gpio_desc *desc)
+{
+ /* GPIO can never have been requested */
+ WARN_ON(1);
+ return ERR_PTR(-ENODEV);
+}
+
+
+#endif /* CONFIG_GPIOLIB */
+
+#if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS)
+
+int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
+int gpiod_export_link(struct device *dev, const char *name,
+ struct gpio_desc *desc);
+int gpiod_sysfs_set_active_low(struct gpio_desc *desc, int value);
+void gpiod_unexport(struct gpio_desc *desc);
+
+#else /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */
+
+static inline int gpiod_export(struct gpio_desc *desc,
+ bool direction_may_change)
+{
+ return -ENOSYS;
+}
+
+static inline int gpiod_export_link(struct device *dev, const char *name,
+ struct gpio_desc *desc)
+{
+ return -ENOSYS;
+}
+
+static inline int gpiod_sysfs_set_active_low(struct gpio_desc *desc, int value)
+{
+ return -ENOSYS;
+}
+
+static inline void gpiod_unexport(struct gpio_desc *desc)
+{
+}
+
+#endif /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */
+
+#endif
diff --git a/include/linux/gpio/driver.h b/include/linux/gpio/driver.h
new file mode 100644
index 0000000..656a27e
--- /dev/null
+++ b/include/linux/gpio/driver.h
@@ -0,0 +1,184 @@
+#ifndef __LINUX_GPIO_DRIVER_H
+#define __LINUX_GPIO_DRIVER_H
+
+#include <linux/types.h>
+
+struct device;
+struct gpio_desc;
+struct seq_file;
+
+/**
+ * struct gpio_chip - abstract a GPIO controller
+ * @label: for diagnostics
+ * @dev: optional device providing the GPIOs
+ * @owner: helps prevent removal of modules exporting active GPIOs
+ * @list: links gpio_chips together for traversal
+ * @request: optional hook for chip-specific activation, such as
+ * enabling module power and clock; may sleep
+ * @free: optional hook for chip-specific deactivation, such as
+ * disabling module power and clock; may sleep
+ * @get_direction: returns direction for signal "offset", 0=out, 1=in,
+ * (same as GPIOF_DIR_XXX), or negative error
+ * @direction_input: configures signal "offset" as input, or returns error
+ * @direction_output: configures signal "offset" as output, or returns error
+ * @get: returns value for signal "offset"; for output signals this
+ * returns either the value actually sensed, or zero
+ * @set: assigns output value for signal "offset"
+ * @set_debounce: optional hook for setting debounce time for specified gpio in
+ * interrupt triggered gpio chips
+ * @to_irq: optional hook supporting non-static gpio_to_irq() mappings;
+ * implementation may not sleep
+ * @dbg_show: optional routine to show contents in debugfs; default code
+ * will be used when this is omitted, but custom code can show extra
+ * state (such as pullup/pulldown configuration).
+ * @base: identifies the first GPIO number handled by this chip; or, if
+ * negative during registration, requests dynamic ID allocation.
+ * @ngpio: the number of GPIOs handled by this controller; the last GPIO
+ * handled is (base + ngpio - 1).
+ * @desc: array of ngpio descriptors. Private.
+ * @can_sleep: flag must be set iff get()/set() methods sleep, as they
+ * must while accessing GPIO expander chips over I2C or SPI
+ * @names: if set, must be an array of strings to use as alternative
+ * names for the GPIOs in this chip. Any entry in the array
+ * may be NULL if there is no alias for the GPIO, however the
+ * array must be @ngpio entries long. A name can include a single printk
+ * format specifier for an unsigned int. It is substituted by the actual
+ * number of the gpio.
+ *
+ * A gpio_chip can help platforms abstract various sources of GPIOs so
+ * they can all be accessed through a common programing interface.
+ * Example sources would be SOC controllers, FPGAs, multifunction
+ * chips, dedicated GPIO expanders, and so on.
+ *
+ * Each chip controls a number of signals, identified in method calls
+ * by "offset" values in the range 0..(@ngpio - 1). When those signals
+ * are referenced through calls like gpio_get_value(gpio), the offset
+ * is calculated by subtracting @base from the gpio number.
+ */
+struct gpio_chip {
+ const char *label;
+ struct device *dev;
+ struct module *owner;
+ struct list_head list;
+
+ int (*request)(struct gpio_chip *chip,
+ unsigned offset);
+ void (*free)(struct gpio_chip *chip,
+ unsigned offset);
+ int (*get_direction)(struct gpio_chip *chip,
+ unsigned offset);
+ int (*direction_input)(struct gpio_chip *chip,
+ unsigned offset);
+ int (*direction_output)(struct gpio_chip *chip,
+ unsigned offset, int value);
+ int (*get)(struct gpio_chip *chip,
+ unsigned offset);
+ void (*set)(struct gpio_chip *chip,
+ unsigned offset, int value);
+ int (*set_debounce)(struct gpio_chip *chip,
+ unsigned offset,
+ unsigned debounce);
+
+ int (*to_irq)(struct gpio_chip *chip,
+ unsigned offset);
+
+ void (*dbg_show)(struct seq_file *s,
+ struct gpio_chip *chip);
+ int base;
+ u16 ngpio;
+ struct gpio_desc *desc;
+ const char *const *names;
+ unsigned can_sleep:1;
+ unsigned exported:1;
+
+#if defined(CONFIG_OF_GPIO)
+ /*
+ * If CONFIG_OF is enabled, then all GPIO controllers described in the
+ * device tree automatically may have an OF translation
+ */
+ struct device_node *of_node;
+ int of_gpio_n_cells;
+ int (*of_xlate)(struct gpio_chip *gc,
+ const struct of_phandle_args *gpiospec, u32 *flags);
+#endif
+#ifdef CONFIG_PINCTRL
+ /*
+ * If CONFIG_PINCTRL is enabled, then gpio controllers can optionally
+ * describe the actual pin range which they serve in an SoC. This
+ * information would be used by pinctrl subsystem to configure
+ * corresponding pins for gpio usage.
+ */
+ struct list_head pin_ranges;
+#endif
+};
+
+extern const char *gpiochip_is_requested(struct gpio_chip *chip,
+ unsigned offset);
+
+/* add/remove chips */
+extern int gpiochip_add(struct gpio_chip *chip);
+extern int __must_check gpiochip_remove(struct gpio_chip *chip);
+extern struct gpio_chip *gpiochip_find(void *data,
+ int (*match)(struct gpio_chip *chip, void *data));
+
+/* lock/unlock as IRQ */
+int gpiod_lock_as_irq(struct gpio_desc *desc);
+void gpiod_unlock_as_irq(struct gpio_desc *desc);
+
+/**
+ * Lookup table for associating GPIOs to specific devices and functions using
+ * platform data.
+ */
+struct gpiod_lookup {
+ struct list_head list;
+ /*
+ * name of the chip the GPIO belongs to
+ */
+ const char *chip_label;
+ /*
+ * hardware number (i.e. relative to the chip) of the GPIO
+ */
+ u16 chip_hwnum;
+ /*
+ * name of device that can claim this GPIO
+ */
+ const char *dev_id;
+ /*
+ * name of the GPIO from the device's point of view
+ */
+ const char *con_id;
+ /*
+ * index of the GPIO in case several GPIOs share the same name
+ */
+ unsigned int idx;
+ /*
+ * mask of GPIOF_* values
+ */
+ unsigned long flags;
+};
+
+/*
+ * Simple definition of a single GPIO under a con_id
+ */
+#define GPIO_LOOKUP(_chip_label, _chip_hwnum, _dev_id, _con_id, _flags) \
+ GPIO_LOOKUP_IDX(_chip_label, _chip_hwnum, _dev_id, _con_id, 0, _flags)
+
+/*
+ * Use this macro if you need to have several GPIOs under the same con_id.
+ * Each GPIO needs to use a different index and can be accessed using
+ * gpiod_get_index()
+ */
+#define GPIO_LOOKUP_IDX(_chip_label, _chip_hwnum, _dev_id, _con_id, _idx, \
+ _flags) \
+{ \
+ .chip_label = _chip_label, \
+ .chip_hwnum = _chip_hwnum, \
+ .dev_id = _dev_id, \
+ .con_id = _con_id, \
+ .idx = _idx, \
+ .flags = _flags, \
+}
+
+void gpiod_add_table(struct gpiod_lookup *table, size_t size);
+
+#endif
diff --git a/include/linux/of_gpio.h b/include/linux/of_gpio.h
index a83dc6f..f14123a 100644
--- a/include/linux/of_gpio.h
+++ b/include/linux/of_gpio.h
@@ -19,6 +19,7 @@
#include <linux/errno.h>
#include <linux/gpio.h>
#include <linux/of.h>
+#include <linux/gpio/consumer.h>
struct device_node;
@@ -47,7 +48,7 @@ static inline struct of_mm_gpio_chip *to_of_mm_gpio_chip(struct gpio_chip *gc)
return container_of(gc, struct of_mm_gpio_chip, gc);
}
-extern int of_get_named_gpio_flags(struct device_node *np,
+extern struct gpio_desc *of_get_named_gpiod_flags(struct device_node *np,
const char *list_name, int index, enum of_gpio_flags *flags);
extern int of_mm_gpiochip_add(struct device_node *np,
@@ -62,10 +63,10 @@ extern int of_gpio_simple_xlate(struct gpio_chip *gc,
#else /* CONFIG_OF_GPIO */
/* Drivers may not strictly depend on the GPIO support, so let them link. */
-static inline int of_get_named_gpio_flags(struct device_node *np,
+static inline struct gpio_desc *of_get_named_gpiod_flags(struct device_node *np,
const char *list_name, int index, enum of_gpio_flags *flags)
{
- return -ENOSYS;
+ return ERR_PTR(-ENOSYS);
}
static inline int of_gpio_simple_xlate(struct gpio_chip *gc,
@@ -80,6 +81,18 @@ static inline void of_gpiochip_remove(struct gpio_chip *gc) { }
#endif /* CONFIG_OF_GPIO */
+static inline int of_get_named_gpio_flags(struct device_node *np,
+ const char *list_name, int index, enum of_gpio_flags *flags)
+{
+ struct gpio_desc *desc;
+ desc = of_get_named_gpiod_flags(np, list_name, index, flags);
+
+ if (IS_ERR(desc))
+ return PTR_ERR(desc);
+ else
+ return desc_to_gpio(desc);
+}
+
/**
* of_gpio_named_count() - Count GPIOs for a device
* @np: device node to count GPIOs for
@@ -117,15 +130,21 @@ static inline int of_gpio_count(struct device_node *np)
}
/**
- * of_get_gpio_flags() - Get a GPIO number and flags to use with GPIO API
+ * of_get_gpiod_flags() - Get a GPIO descriptor and flags to use with GPIO API
* @np: device node to get GPIO from
* @index: index of the GPIO
* @flags: a flags pointer to fill in
*
- * Returns GPIO number to use with Linux generic GPIO API, or one of the errno
+ * Returns GPIO descriptor to use with Linux generic GPIO API, or a errno
* value on the error condition. If @flags is not NULL the function also fills
* in flags for the GPIO.
*/
+static inline struct gpio_desc *of_get_gpiod_flags(struct device_node *np,
+ int index, enum of_gpio_flags *flags)
+{
+ return of_get_named_gpiod_flags(np, "gpios", index, flags);
+}
+
static inline int of_get_gpio_flags(struct device_node *np, int index,
enum of_gpio_flags *flags)
{