diff options
137 files changed, 8141 insertions, 1065 deletions
diff --git a/Documentation/powerpc/dts-bindings/fsl/diu.txt b/Documentation/powerpc/dts-bindings/fsl/diu.txt index deb35de..b66cb6d 100644 --- a/Documentation/powerpc/dts-bindings/fsl/diu.txt +++ b/Documentation/powerpc/dts-bindings/fsl/diu.txt @@ -4,10 +4,17 @@ The Freescale DIU is a LCD controller, with proper hardware, it can also drive DVI monitors. Required properties: -- compatible : should be "fsl-diu". +- compatible : should be "fsl,diu" or "fsl,mpc5121-diu". - reg : should contain at least address and length of the DIU register set. -- Interrupts : one DIU interrupt should be describe here. +- interrupts : one DIU interrupt should be described here. +- interrupt-parent : the phandle for the interrupt controller that + services interrupts for this device. + +Optional properties: +- edid : verbatim EDID data block describing attached display. + Data from the detailed timing descriptor will be used to + program the display controller. Example (MPC8610HPCD): display@2c000 { @@ -16,3 +23,12 @@ Example (MPC8610HPCD): interrupts = <72 2>; interrupt-parent = <&mpic>; }; + +Example for MPC5121: + display@2100 { + compatible = "fsl,mpc5121-diu"; + reg = <0x2100 0x100>; + interrupts = <64 0x8>; + interrupt-parent = <&ipic>; + edid = [edid-data]; + }; diff --git a/Documentation/powerpc/dts-bindings/fsl/i2c.txt b/Documentation/powerpc/dts-bindings/fsl/i2c.txt index 50da203..1eacd6b 100644 --- a/Documentation/powerpc/dts-bindings/fsl/i2c.txt +++ b/Documentation/powerpc/dts-bindings/fsl/i2c.txt @@ -20,6 +20,7 @@ Recommended properties : - fsl,preserve-clocking : boolean; if defined, the clock settings from the bootloader are preserved (not touched). - clock-frequency : desired I2C bus clock frequency in Hz. + - fsl,timeout : I2C bus timeout in microseconds. Examples : @@ -59,4 +60,5 @@ Examples : interrupts = <43 2>; interrupt-parent = <&mpic>; clock-frequency = <400000>; + fsl,timeout = <10000>; }; diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 2031a28..e4545f8 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -141,6 +141,7 @@ config PPC select GENERIC_ATOMIC64 if PPC32 select HAVE_PERF_EVENTS select HAVE_REGS_AND_STACK_ACCESS_API + select HAVE_HW_BREAKPOINT if PERF_EVENTS && PPC_BOOK3S_64 config EARLY_PRINTK bool @@ -218,7 +219,7 @@ config ARCH_HIBERNATION_POSSIBLE config ARCH_SUSPEND_POSSIBLE def_bool y depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx || \ - PPC_85xx || PPC_86xx + PPC_85xx || PPC_86xx || PPC_PSERIES config PPC_DCR_NATIVE bool @@ -351,7 +352,7 @@ config ARCH_ENABLE_MEMORY_HOTREMOVE config KEXEC bool "kexec system call (EXPERIMENTAL)" - depends on (PPC_BOOK3S || (FSL_BOOKE && !SMP)) && EXPERIMENTAL + depends on (PPC_BOOK3S || FSL_BOOKE) && EXPERIMENTAL help kexec is a system call that implements the ability to shutdown your current kernel, and to start another kernel. It is like a reboot @@ -368,8 +369,8 @@ config KEXEC config CRASH_DUMP bool "Build a kdump crash kernel" - depends on PPC64 || 6xx - select RELOCATABLE if PPC64 + depends on PPC64 || 6xx || FSL_BOOKE + select RELOCATABLE if PPC64 || FSL_BOOKE help Build a kernel suitable for use as a kdump capture kernel. The same kernel binary can be used as production kernel and dump @@ -668,7 +669,7 @@ config NEED_SG_DMA_LENGTH config GENERIC_ISA_DMA bool - depends on PPC64 || POWER4 || 6xx && !CPM2 + depends on ISA_DMA_API default y config PPC_INDIRECT_PCI @@ -897,7 +898,7 @@ config KERNEL_START_BOOL config KERNEL_START hex "Virtual address of kernel base" if KERNEL_START_BOOL default PAGE_OFFSET if PAGE_OFFSET_BOOL - default "0xc2000000" if CRASH_DUMP + default "0xc2000000" if CRASH_DUMP && !RELOCATABLE default "0xc0000000" config PHYSICAL_START_BOOL @@ -910,7 +911,7 @@ config PHYSICAL_START_BOOL config PHYSICAL_START hex "Physical address where the kernel is loaded" if PHYSICAL_START_BOOL - default "0x02000000" if PPC_STD_MMU && CRASH_DUMP + default "0x02000000" if PPC_STD_MMU && CRASH_DUMP && !RELOCATABLE default "0x00000000" config PHYSICAL_ALIGN diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts index cd56bb5..5806ef0 100644 --- a/arch/powerpc/boot/dts/canyonlands.dts +++ b/arch/powerpc/boot/dts/canyonlands.dts @@ -270,7 +270,7 @@ clock-frequency = <0>; /* Filled in by U-Boot */ current-speed = <0>; /* Filled in by U-Boot */ interrupt-parent = <&UIC1>; - interrupts = <0x1d 0x4>; + interrupts = <28 0x4>; }; UART3: serial@ef600600 { @@ -281,7 +281,7 @@ clock-frequency = <0>; /* Filled in by U-Boot */ current-speed = <0>; /* Filled in by U-Boot */ interrupt-parent = <&UIC1>; - interrupts = <0x1e 0x4>; + interrupts = <29 0x4>; }; IIC0: i2c@ef600700 { diff --git a/arch/powerpc/boot/dts/glacier.dts b/arch/powerpc/boot/dts/glacier.dts index d62a4fb..e618fc4 100644 --- a/arch/powerpc/boot/dts/glacier.dts +++ b/arch/powerpc/boot/dts/glacier.dts @@ -259,7 +259,7 @@ clock-frequency = <0>; /* Filled in by U-Boot */ current-speed = <0>; /* Filled in by U-Boot */ interrupt-parent = <&UIC1>; - interrupts = <0x1d 0x4>; + interrupts = <28 0x4>; }; UART3: serial@ef600600 { @@ -270,7 +270,7 @@ clock-frequency = <0>; /* Filled in by U-Boot */ current-speed = <0>; /* Filled in by U-Boot */ interrupt-parent = <&UIC1>; - interrupts = <0x1e 0x4>; + interrupts = <29 0x4>; }; IIC0: i2c@ef600700 { diff --git a/arch/powerpc/boot/dts/mpc8308rdb.dts b/arch/powerpc/boot/dts/mpc8308rdb.dts new file mode 100644 index 0000000..a97eb2d --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8308rdb.dts @@ -0,0 +1,303 @@ +/* + * MPC8308RDB Device Tree Source + * + * Copyright 2009 Freescale Semiconductor Inc. + * Copyright 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + compatible = "fsl,mpc8308rdb"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8308@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <16384>; + i-cache-size = <16384>; + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x08000000>; // 128MB at 0 + }; + + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupts = <77 0x8>; + interrupt-parent = <&ipic>; + + // CS0 and CS1 are swapped when + // booting from nand, but the + // addresses are the same. + ranges = <0x0 0x0 0xfe000000 0x00800000 + 0x1 0x0 0xe0600000 0x00002000 + 0x2 0x0 0xf0000000 0x00020000 + 0x3 0x0 0xfa000000 0x00008000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x800000>; + bank-width = <2>; + device-width = <1>; + + u-boot@0 { + reg = <0x0 0x60000>; + read-only; + }; + env@60000 { + reg = <0x60000 0x10000>; + }; + env1@70000 { + reg = <0x70000 0x10000>; + }; + kernel@80000 { + reg = <0x80000 0x200000>; + }; + dtb@280000 { + reg = <0x280000 0x10000>; + }; + ramdisk@290000 { + reg = <0x290000 0x570000>; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8315-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x2000>; + + jffs2@0 { + reg = <0x0 0x2000000>; + }; + }; + }; + + immr@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8315-immr", "simple-bus"; + ranges = <0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <38 0x8>; + dr_mode = "peripheral"; + phy_type = "ulpi"; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x24000 0x1000>; + + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <32 0x8 33 0x8 34 0x8>; + interrupt-parent = <&ipic>; + tbi-handle = < &tbi0 >; + phy-handle = < &phy2 >; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + phy2: ethernet-phy@2 { + interrupt-parent = <&ipic>; + interrupts = <17 0x8>; + reg = <0x2>; + device_type = "ethernet-phy"; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 0x8 36 0x8 37 0x8>; + interrupt-parent = <&ipic>; + tbi-handle = < &tbi1 >; + /* Vitesse 7385 isn't on the MDIO bus */ + fixed-link = <1 1 1000 0 0>; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <133333333>; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <133333333>; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; + }; + + gpio@c00 { + #gpio-cells = <2>; + device_type = "gpio"; + compatible = "fsl,mpc8308-gpio", "fsl,mpc8349-gpio"; + reg = <0xc00 0x18>; + interrupts = <74 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + + /* IPIC + * interrupts cell = <intr #, sense> + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + ipic: interrupt-controller@700 { + compatible = "fsl,ipic"; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + device_type = "ipic"; + }; + + ipic-msi@7c0 { + compatible = "fsl,ipic-msi"; + reg = <0x7c0 0x40>; + msi-available-ranges = <0x0 0x100>; + interrupts = < 0x43 0x8 + 0x4 0x8 + 0x51 0x8 + 0x52 0x8 + 0x56 0x8 + 0x57 0x8 + 0x58 0x8 + 0x59 0x8 >; + interrupt-parent = < &ipic >; + }; + + }; + + pci0: pcie@e0009000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8308-pcie", "fsl,mpc8314-pcie"; + reg = <0xe0009000 0x00001000 + 0xb0000000 0x01000000>; + ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 + 0x01000000 0 0x00000000 0xb1000000 0 0x00800000>; + bus-range = <0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0 0 0 1 &ipic 1 8 + 0 0 0 2 &ipic 1 8 + 0 0 0 3 &ipic 1 8 + 0 0 0 4 &ipic 1 8>; + interrupts = <0x1 0x8>; + interrupt-parent = <&ipic>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xa0000000 + 0x02000000 0 0xa0000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts index 9dc2929..8d1bf0f 100644 --- a/arch/powerpc/boot/dts/mpc8540ads.dts +++ b/arch/powerpc/boot/dts/mpc8540ads.dts @@ -71,14 +71,14 @@ }; memory-controller@2000 { - compatible = "fsl,8540-memory-controller"; + compatible = "fsl,mpc8540-memory-controller"; reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; interrupts = <18 2>; }; L2: l2-cache-controller@20000 { - compatible = "fsl,8540-l2-cache-controller"; + compatible = "fsl,mpc8540-l2-cache-controller"; reg = <0x20000 0x1000>; cache-line-size = <32>; // 32 bytes cache-size = <0x40000>; // L2, 256K diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts index 9a3ad31..87ff965 100644 --- a/arch/powerpc/boot/dts/mpc8541cds.dts +++ b/arch/powerpc/boot/dts/mpc8541cds.dts @@ -71,14 +71,14 @@ }; memory-controller@2000 { - compatible = "fsl,8541-memory-controller"; + compatible = "fsl,mpc8541-memory-controller"; reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; interrupts = <18 2>; }; L2: l2-cache-controller@20000 { - compatible = "fsl,8541-l2-cache-controller"; + compatible = "fsl,mpc8541-l2-cache-controller"; reg = <0x20000 0x1000>; cache-line-size = <32>; // 32 bytes cache-size = <0x40000>; // L2, 256K diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts index 98e94b4..d793968 100644 --- a/arch/powerpc/boot/dts/mpc8544ds.dts +++ b/arch/powerpc/boot/dts/mpc8544ds.dts @@ -73,14 +73,14 @@ }; memory-controller@2000 { - compatible = "fsl,8544-memory-controller"; + compatible = "fsl,mpc8544-memory-controller"; reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; interrupts = <18 2>; }; L2: l2-cache-controller@20000 { - compatible = "fsl,8544-l2-cache-controller"; + compatible = "fsl,mpc8544-l2-cache-controller"; reg = <0x20000 0x1000>; cache-line-size = <32>; // 32 bytes cache-size = <0x40000>; // L2, 256K diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts index 0f52624..a17a557 100644 --- a/arch/powerpc/boot/dts/mpc8548cds.dts +++ b/arch/powerpc/boot/dts/mpc8548cds.dts @@ -74,14 +74,14 @@ }; memory-controller@2000 { - compatible = "fsl,8548-memory-controller"; + compatible = "fsl,mpc8548-memory-controller"; reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; interrupts = <18 2>; }; L2: l2-cache-controller@20000 { - compatible = "fsl,8548-l2-cache-controller"; + compatible = "fsl,mpc8548-l2-cache-controller"; reg = <0x20000 0x1000>; cache-line-size = <32>; // 32 bytes cache-size = <0x80000>; // L2, 512K diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts index 065b2f0..5c5614f 100644 --- a/arch/powerpc/boot/dts/mpc8555cds.dts +++ b/arch/powerpc/boot/dts/mpc8555cds.dts @@ -71,14 +71,14 @@ }; memory-controller@2000 { - compatible = "fsl,8555-memory-controller"; + compatible = "fsl,mpc8555-memory-controller"; reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; interrupts = <18 2>; }; L2: l2-cache-controller@20000 { - compatible = "fsl,8555-l2-cache-controller"; + compatible = "fsl,mpc8555-l2-cache-controller"; reg = <0x20000 0x1000>; cache-line-size = <32>; // 32 bytes cache-size = <0x40000>; // L2, 256K diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts index a5bb1ec..6e85e1b 100644 --- a/arch/powerpc/boot/dts/mpc8560ads.dts +++ b/arch/powerpc/boot/dts/mpc8560ads.dts @@ -71,14 +71,14 @@ }; memory-controller@2000 { - compatible = "fsl,8540-memory-controller"; + compatible = "fsl,mpc8540-memory-controller"; reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; interrupts = <18 2>; }; L2: l2-cache-controller@20000 { - compatible = "fsl,8540-l2-cache-controller"; + compatible = "fsl,mpc8540-l2-cache-controller"; reg = <0x20000 0x1000>; cache-line-size = <32>; // 32 bytes cache-size = <0x40000>; // L2, 256K diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts index 92fb178..30cf0e09 100644 --- a/arch/powerpc/boot/dts/mpc8568mds.dts +++ b/arch/powerpc/boot/dts/mpc8568mds.dts @@ -124,14 +124,14 @@ }; memory-controller@2000 { - compatible = "fsl,8568-memory-controller"; + compatible = "fsl,mpc8568-memory-controller"; reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; interrupts = <18 2>; }; L2: l2-cache-controller@20000 { - compatible = "fsl,8568-l2-cache-controller"; + compatible = "fsl,mpc8568-l2-cache-controller"; reg = <0x20000 0x1000>; cache-line-size = <32>; // 32 bytes cache-size = <0x80000>; // L2, 512K diff --git a/arch/powerpc/boot/dts/p1021mds.dts b/arch/powerpc/boot/dts/p1021mds.dts index 7fad2df..ad5b852 100644 --- a/arch/powerpc/boot/dts/p1021mds.dts +++ b/arch/powerpc/boot/dts/p1021mds.dts @@ -617,6 +617,7 @@ bus-frequency = <0>; fsl,qe-num-riscs = <1>; fsl,qe-num-snums = <28>; + status = "disabled"; /* no firmware loaded */ qeic: interrupt-controller@80 { interrupt-controller; diff --git a/arch/powerpc/boot/dts/p1022ds.dts b/arch/powerpc/boot/dts/p1022ds.dts new file mode 100644 index 0000000..8bcb10b --- /dev/null +++ b/arch/powerpc/boot/dts/p1022ds.dts @@ -0,0 +1,633 @@ +/* + * P1022 DS 36Bit Physical Address Map Device Tree Source + * + * Copyright 2010 Freescale Semiconductor, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +/ { + model = "fsl,P1022"; + compatible = "fsl,P1022DS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,P1022@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + + PowerPC,P1022@1 { + device_type = "cpu"; + reg = <0x1>; + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + }; + + localbus@fffe05000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,p1022-elbc", "fsl,elbc", "simple-bus"; + reg = <0 0xffe05000 0 0x1000>; + interrupts = <19 2>; + + ranges = <0x0 0x0 0xf 0xe8000000 0x08000000 + 0x1 0x0 0xf 0xe0000000 0x08000000 + 0x2 0x0 0x0 0xffa00000 0x00040000 + 0x3 0x0 0xf 0xffdf0000 0x00008000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + reg = <0x0 0x03000000>; + label = "ramdisk-nor"; + read-only; + }; + + partition@3000000 { + reg = <0x03000000 0x00e00000>; + label = "diagnostic-nor"; + read-only; + }; + + partition@3e00000 { + reg = <0x03e00000 0x00200000>; + label = "dink-nor"; + read-only; + }; + + partition@4000000 { + reg = <0x04000000 0x00400000>; + label = "kernel-nor"; + read-only; + }; + + partition@4400000 { + reg = <0x04400000 0x03b00000>; + label = "jffs2-nor"; + }; + + partition@7f00000 { + reg = <0x07f00000 0x00080000>; + label = "dtb-nor"; + read-only; + }; + + partition@7f80000 { + reg = <0x07f80000 0x00080000>; + label = "u-boot-nor"; + read-only; + }; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,elbc-fcm-nand"; + reg = <0x2 0x0 0x40000>; + + partition@0 { + reg = <0x0 0x02000000>; + label = "u-boot-nand"; + read-only; + }; + + partition@2000000 { + reg = <0x02000000 0x10000000>; + label = "jffs2-nand"; + }; + + partition@12000000 { + reg = <0x12000000 0x10000000>; + label = "ramdisk-nand"; + read-only; + }; + + partition@22000000 { + reg = <0x22000000 0x04000000>; + label = "kernel-nand"; + }; + + partition@26000000 { + reg = <0x26000000 0x01000000>; + label = "dtb-nand"; + read-only; + }; + + partition@27000000 { + reg = <0x27000000 0x19000000>; + label = "reserved-nand"; + }; + }; + }; + + soc@fffe00000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,p1022-immr", "simple-bus"; + ranges = <0x0 0xf 0xffe00000 0x100000>; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,p1022-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <16 2>; + }; + + memory-controller@2000 { + compatible = "fsl,p1022-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + dfsrr; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + dfsrr; + + wm8776:codec@1a { + compatible = "wlf,wm8776"; + reg = <0x1a>; + /* MCLK source is a stand-alone oscillator */ + clock-frequency = <12288000>; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + }; + + spi@7000 { + cell-index = <0>; + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,espi"; + reg = <0x7000 0x1000>; + interrupts = <59 0x2>; + espi,num-ss-bits = <4>; + mode = "cpu"; + + fsl_m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,espi-flash"; + reg = <0>; + linux,modalias = "fsl_m25p80"; + spi-max-frequency = <40000000>; /* input clock */ + partition@0 { + label = "u-boot-spi"; + reg = <0x00000000 0x00100000>; + read-only; + }; + partition@100000 { + label = "kernel-spi"; + reg = <0x00100000 0x00500000>; + read-only; + }; + partition@600000 { + label = "dtb-spi"; + reg = <0x00600000 0x00100000>; + read-only; + }; + partition@700000 { + label = "file system-spi"; + reg = <0x00700000 0x00900000>; + }; + }; + }; + + ssi@15000 { + compatible = "fsl,mpc8610-ssi"; + cell-index = <0>; + reg = <0x15000 0x100>; + interrupts = <75 2>; + fsl,mode = "i2s-slave"; + codec-handle = <&wm8776>; + fsl,playback-dma = <&dma00>; + fsl,capture-dma = <&dma01>; + fsl,fifo-depth = <16>; + }; + + dma@c300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,eloplus-dma"; + reg = <0xc300 0x4>; + ranges = <0x0 0xc100 0x200>; + cell-index = <1>; + dma00: dma-channel@0 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupts = <76 2>; + }; + dma01: dma-channel@80 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupts = <77 2>; + }; + dma-channel@100 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupts = <78 2>; + }; + dma-channel@180 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupts = <79 2>; + }; + }; + + gpio: gpio-controller@f000 { + #gpio-cells = <2>; + compatible = "fsl,mpc8572-gpio"; + reg = <0xf000 0x100>; + interrupts = <47 0x2>; + gpio-controller; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,p1022-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2, 256K + interrupts = <16 2>; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupts = <23 2>; + }; + }; + + usb@22000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl-usb2-dr"; + reg = <0x22000 0x1000>; + interrupts = <28 0x2>; + phy_type = "ulpi"; + }; + + mdio@24000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,etsec2-mdio"; + reg = <0x24000 0x1000 0xb0030 0x4>; + + phy0: ethernet-phy@0 { + interrupts = <3 1>; + reg = <0x1>; + }; + phy1: ethernet-phy@1 { + interrupts = <9 1>; + reg = <0x2>; + }; + }; + + mdio@25000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,etsec2-mdio"; + reg = <0x25000 0x1000 0xb1030 0x4>; + }; + + enet0: ethernet@B0000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "fsl,etsec2"; + fsl,num_rx_queues = <0x8>; + fsl,num_tx_queues = <0x8>; + fsl,magic-packet; + fsl,wake-on-filer; + local-mac-address = [ 00 00 00 00 00 00 ]; + fixed-link = <1 1 1000 0 0>; + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + queue-group@0{ + #address-cells = <1>; + #size-cells = <1>; + reg = <0xB0000 0x1000>; + interrupts = <29 2 30 2 34 2>; + }; + queue-group@1{ + #address-cells = <1>; + #size-cells = <1>; + reg = <0xB4000 0x1000>; + interrupts = <17 2 18 2 24 2>; + }; + }; + + enet1: ethernet@B1000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "fsl,etsec2"; + fsl,num_rx_queues = <0x8>; + fsl,num_tx_queues = <0x8>; + local-mac-address = [ 00 00 00 00 00 00 ]; + fixed-link = <1 1 1000 0 0>; + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + queue-group@0{ + #address-cells = <1>; + #size-cells = <1>; + reg = <0xB1000 0x1000>; + interrupts = <35 2 36 2 40 2>; + }; + queue-group@1{ + #address-cells = <1>; + #size-cells = <1>; + reg = <0xB5000 0x1000>; + interrupts = <51 2 52 2 67 2>; + }; + }; + + sdhci@2e000 { + compatible = "fsl,p1022-esdhc", "fsl,esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <72 0x2>; + fsl,sdhci-auto-cmd12; + /* Filled in by U-Boot */ + clock-frequency = <0>; + }; + + crypto@30000 { + compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0", + "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1", + "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2 58 2>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x97c>; + fsl,descriptor-types-mask = <0x3a30abf>; + }; + + sata@18000 { + compatible = "fsl,mpc8536-sata", "fsl,pq-sata"; + reg = <0x18000 0x1000>; + cell-index = <1>; + interrupts = <74 0x2>; + }; + + sata@19000 { + compatible = "fsl,mpc8536-sata", "fsl,pq-sata"; + reg = <0x19000 0x1000>; + cell-index = <2>; + interrupts = <41 0x2>; + }; + + power@e0070{ + compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc"; + reg = <0xe0070 0x20>; + }; + + display@10000 { + compatible = "fsl,diu", "fsl,p1022-diu"; + reg = <0x10000 1000>; + interrupts = <64 2>; + }; + + timer@41100 { + compatible = "fsl,mpic-global-timer"; + reg = <0x41100 0x204>; + interrupts = <0xf7 0x2>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + + msi@41600 { + compatible = "fsl,p1022-msi", "fsl,mpic-msi"; + reg = <0x41600 0x80>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 + 0xe1 0 + 0xe2 0 + 0xe3 0 + 0xe4 0 + 0xe5 0 + 0xe6 0 + 0xe7 0>; + }; + + global-utilities@e0000 { //global utilities block + compatible = "fsl,p1022-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + }; + + pci0: pcie@fffe09000 { + compatible = "fsl,p1022-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xf 0xffe09000 0 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xa0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + clock-frequency = <33333333>; + interrupts = <16 2>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 4 1 + 0000 0 0 2 &mpic 5 1 + 0000 0 0 3 &mpic 6 1 + 0000 0 0 4 &mpic 7 1 + >; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@fffe0a000 { + compatible = "fsl,p1022-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xf 0xffe0a000 0 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xc0000000 0xc 0x40000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>; + clock-frequency = <33333333>; + interrupts = <16 2>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 0 1 + 0000 0 0 2 &mpic 1 1 + 0000 0 0 3 &mpic 2 1 + 0000 0 0 4 &mpic 3 1 + >; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + + pci2: pcie@fffe0b000 { + compatible = "fsl,p1022-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xf 0xffe0b000 0 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; + clock-frequency = <33333333>; + interrupts = <16 2>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 8 1 + 0000 0 0 2 &mpic 9 1 + 0000 0 0 3 &mpic 10 1 + 0000 0 0 4 &mpic 11 1 + >; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/pdm360ng.dts b/arch/powerpc/boot/dts/pdm360ng.dts new file mode 100644 index 0000000..94dfa5c --- /dev/null +++ b/arch/powerpc/boot/dts/pdm360ng.dts @@ -0,0 +1,410 @@ +/* + * Device Tree Source for IFM PDM360NG. + * + * Copyright 2009 - 2010 DENX Software Engineering. + * Anatolij Gustschin <agust@denx.de> + * + * Based on MPC5121E ADS dts. + * Copyright 2008 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "pdm360ng"; + compatible = "ifm,pdm360ng"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&ipic>; + + aliases { + ethernet0 = ð0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,5121@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <0x20>; // 32 bytes + i-cache-line-size = <0x20>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <49500000>;// 49.5 MHz (csb/4) + bus-frequency = <198000000>; // 198 MHz csb bus + clock-frequency = <396000000>; // 396 MHz ppc core + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; // 512MB at 0 + }; + + nfc@40000000 { + compatible = "fsl,mpc5121-nfc"; + reg = <0x40000000 0x100000>; + interrupts = <0x6 0x8>; + #address-cells = <0x1>; + #size-cells = <0x1>; + bank-width = <0x1>; + chips = <0x1>; + + partition@0 { + label = "nand0"; + reg = <0x0 0x40000000>; + }; + }; + + sram@50000000 { + compatible = "fsl,mpc5121-sram"; + reg = <0x50000000 0x20000>; // 128K at 0x50000000 + }; + + localbus@80000020 { + compatible = "fsl,mpc5121-localbus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0x80000020 0x40>; + + ranges = <0x0 0x0 0xf0000000 0x10000000 /* Flash */ + 0x2 0x0 0x50040000 0x00020000>; /* CS2: MRAM */ + + flash@0,0 { + compatible = "amd,s29gl01gp", "cfi-flash"; + reg = <0 0x00000000 0x08000000 + 0 0x08000000 0x08000000>; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <4>; + device-width = <2>; + + partition@0 { + label = "u-boot"; + reg = <0x00000000 0x00080000>; + read-only; + }; + partition@80000 { + label = "environment"; + reg = <0x00080000 0x00080000>; + read-only; + }; + partition@100000 { + label = "splash-image"; + reg = <0x00100000 0x00080000>; + read-only; + }; + partition@180000 { + label = "device-tree"; + reg = <0x00180000 0x00040000>; + }; + partition@1c0000 { + label = "kernel"; + reg = <0x001c0000 0x00500000>; + }; + partition@6c0000 { + label = "filesystem"; + reg = <0x006c0000 0x07940000>; + }; + }; + + mram0@2,0 { + compatible = "mtd-ram"; + reg = <2 0x00000 0x10000>; + bank-width = <2>; + }; + + mram1@2,10000 { + compatible = "mtd-ram"; + reg = <2 0x010000 0x10000>; + bank-width = <2>; + }; + }; + + soc@80000000 { + compatible = "fsl,mpc5121-immr"; + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + ranges = <0x0 0x80000000 0x400000>; + reg = <0x80000000 0x400000>; + bus-frequency = <66000000>; // 66 MHz ips bus + + // IPIC + // interrupts cell = <intr #, sense> + // sense values match linux IORESOURCE_IRQ_* defines: + // sense == 8: Level, low assertion + // sense == 2: Edge, high-to-low change + // + ipic: interrupt-controller@c00 { + compatible = "fsl,mpc5121-ipic", "fsl,ipic"; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0xc00 0x100>; + }; + + rtc@a00 { // Real time clock + compatible = "fsl,mpc5121-rtc"; + reg = <0xa00 0x100>; + interrupts = <79 0x8 80 0x8>; + }; + + reset@e00 { // Reset module + compatible = "fsl,mpc5121-reset"; + reg = <0xe00 0x100>; + }; + + clock@f00 { // Clock control + compatible = "fsl,mpc5121-clock"; + reg = <0xf00 0x100>; + }; + + pmc@1000{ //Power Management Controller + compatible = "fsl,mpc5121-pmc"; + reg = <0x1000 0x100>; + interrupts = <83 0x2>; + }; + + gpio@1100 { + compatible = "fsl,mpc5121-gpio"; + reg = <0x1100 0x100>; + interrupts = <78 0x8>; + }; + + can@1300 { + compatible = "fsl,mpc5121-mscan"; + interrupts = <12 0x8>; + reg = <0x1300 0x80>; + }; + + can@1380 { + compatible = "fsl,mpc5121-mscan"; + interrupts = <13 0x8>; + reg = <0x1380 0x80>; + }; + + i2c@1700 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5121-i2c"; + reg = <0x1700 0x20>; + interrupts = <0x9 0x8>; + fsl,preserve-clocking; + + eeprom@50 { + compatible = "at,24c01"; + reg = <0x50>; + }; + + rtc@68 { + compatible = "stm,m41t00"; + reg = <0x68>; + }; + }; + + i2c@1740 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5121-i2c"; + reg = <0x1740 0x20>; + interrupts = <0xb 0x8>; + fsl,preserve-clocking; + }; + + i2ccontrol@1760 { + compatible = "fsl,mpc5121-i2c-ctrl"; + reg = <0x1760 0x8>; + }; + + axe@2000 { + compatible = "fsl,mpc5121-axe"; + reg = <0x2000 0x100>; + interrupts = <42 0x8>; + }; + + display@2100 { + compatible = "fsl,mpc5121-diu"; + reg = <0x2100 0x100>; + interrupts = <64 0x8>; + }; + + can@2300 { + compatible = "fsl,mpc5121-mscan"; + interrupts = <90 0x8>; + reg = <0x2300 0x80>; + }; + + can@2380 { + compatible = "fsl,mpc5121-mscan"; + interrupts = <91 0x8>; + reg = <0x2380 0x80>; + }; + + viu@2400 { + compatible = "fsl,mpc5121-viu"; + reg = <0x2400 0x400>; + interrupts = <67 0x8>; + }; + + mdio@2800 { + compatible = "fsl,mpc5121-fec-mdio"; + reg = <0x2800 0x200>; + #address-cells = <1>; + #size-cells = <0>; + phy: ethernet-phy@0 { + compatible = "smsc,lan8700"; + reg = <0x1f>; + }; + }; + + eth0: ethernet@2800 { + compatible = "fsl,mpc5121-fec"; + reg = <0x2800 0x200>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <4 0x8>; + phy-handle = < &phy >; + }; + + // USB1 using external ULPI PHY + usb@3000 { + compatible = "fsl,mpc5121-usb2-dr"; + reg = <0x3000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <43 0x8>; + dr_mode = "host"; + phy_type = "ulpi"; + }; + + // USB0 using internal UTMI PHY + usb@4000 { + compatible = "fsl,mpc5121-usb2-dr"; + reg = <0x4000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <44 0x8>; + dr_mode = "otg"; + phy_type = "utmi_wide"; + fsl,invert-pwr-fault; + }; + + // IO control + ioctl@a000 { + compatible = "fsl,mpc5121-ioctl"; + reg = <0xA000 0x1000>; + }; + + // 512x PSCs are not 52xx PSCs compatible + serial@11000 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + cell-index = <0>; + reg = <0x11000 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + }; + + serial@11100 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + cell-index = <1>; + reg = <0x11100 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + }; + + serial@11200 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + cell-index = <2>; + reg = <0x11200 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + }; + + serial@11300 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + cell-index = <3>; + reg = <0x11300 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + }; + + serial@11400 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + cell-index = <4>; + reg = <0x11400 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + }; + + serial@11600 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + cell-index = <6>; + reg = <0x11600 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + }; + + serial@11800 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + cell-index = <8>; + reg = <0x11800 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + }; + + serial@11B00 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + cell-index = <11>; + reg = <0x11B00 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + }; + + pscfifo@11f00 { + compatible = "fsl,mpc5121-psc-fifo"; + reg = <0x11f00 0x100>; + interrupts = <40 0x8>; + }; + + spi@11900 { + compatible = "fsl,mpc5121-psc-spi", "fsl,mpc5121-psc"; + cell-index = <9>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x11900 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + + // 7845 touch screen controller + ts@0 { + compatible = "ti,ads7846"; + reg = <0x0>; + spi-max-frequency = <3000000>; + // pen irq is GPIO25 + interrupts = <78 0x8>; + }; + }; + + dma@14000 { + compatible = "fsl,mpc5121-dma"; + reg = <0x14000 0x1800>; + interrupts = <65 0x8>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/stxssa8555.dts b/arch/powerpc/boot/dts/stxssa8555.dts new file mode 100644 index 0000000..49efd44 --- /dev/null +++ b/arch/powerpc/boot/dts/stxssa8555.dts @@ -0,0 +1,380 @@ +/* + * MPC8555-based STx GP3 Device Tree Source + * + * Copyright 2006, 2008 Freescale Semiconductor Inc. + * + * Copyright 2010 Silicon Turnkey Express LLC. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "stx,gp3"; + compatible = "stx,gp3-8560", "stx,gp3"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8555@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; // 33 MHz, from uboot + bus-frequency = <0>; // 166 MHz + clock-frequency = <0>; // 825 MHz, from uboot + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + soc8555@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x0 0xe0000000 0x100000>; + bus-frequency = <0>; + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <8>; + }; + + ecm@1000 { + compatible = "fsl,mpc8555-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8555-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8555-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2, 256K + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8555-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8555-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8555-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8555-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8555-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <5 1>; + reg = <0x2>; + device_type = "ethernet-phy"; + }; + phy1: ethernet-phy@4 { + interrupt-parent = <&mpic>; + interrupts = <5 1>; + reg = <0x4>; + device_type = "ethernet-phy"; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + crypto@30000 { + compatible = "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x7e>; + fsl,descriptor-types-mask = <0x01010ebf>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + + cpm@919c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8555-cpm", "fsl,cpm2"; + reg = <0x919c0 0x30>; + ranges; + + muram@80000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80000 0x10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0x0 0x2000 0x9000 0x1000>; + }; + }; + + brg@919f0 { + compatible = "fsl,mpc8555-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <0x919f0 0x10 0x915f0 0x10>; + }; + + cpmpic: pic@90c00 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + interrupts = <46 2>; + interrupt-parent = <&mpic>; + reg = <0x90c00 0x80>; + compatible = "fsl,mpc8555-cpm-pic", "fsl,cpm2-pic"; + }; + }; + }; + + pci0: pci@e0008000 { + interrupt-map-mask = <0x1f800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x10 */ + 0x8000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x8000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x8000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x8000 0x0 0x0 0x4 &mpic 0x3 0x1 + + /* IDSEL 0x11 */ + 0x8800 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x8800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x8800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x8800 0x0 0x0 0x4 &mpic 0x3 0x1 + + /* IDSEL 0x12 (Slot 1) */ + 0x9000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x9000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x9000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x9000 0x0 0x0 0x4 &mpic 0x3 0x1 + + /* IDSEL 0x13 (Slot 2) */ + 0x9800 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x9800 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x9800 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x9800 0x0 0x0 0x4 &mpic 0x0 0x1 + + /* IDSEL 0x14 (Slot 3) */ + 0xa000 0x0 0x0 0x1 &mpic 0x2 0x1 + 0xa000 0x0 0x0 0x2 &mpic 0x3 0x1 + 0xa000 0x0 0x0 0x3 &mpic 0x0 0x1 + 0xa000 0x0 0x0 0x4 &mpic 0x1 0x1 + + /* IDSEL 0x15 (Slot 4) */ + 0xa800 0x0 0x0 0x1 &mpic 0x3 0x1 + 0xa800 0x0 0x0 0x2 &mpic 0x0 0x1 + 0xa800 0x0 0x0 0x3 &mpic 0x1 0x1 + 0xa800 0x0 0x0 0x4 &mpic 0x2 0x1 + + /* Bus 1 (Tundra Bridge) */ + /* IDSEL 0x12 (ISA bridge) */ + 0x19000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x19000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x19000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x19000 0x0 0x0 0x4 &mpic 0x3 0x1>; + interrupt-parent = <&mpic>; + interrupts = <24 2>; + bus-range = <0 0>; + ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008000 0x1000>; + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + + i8259@19000 { + interrupt-controller; + device_type = "interrupt-controller"; + reg = <0x19000 0x0 0x0 0x0 0x1>; + #address-cells = <0>; + #interrupt-cells = <2>; + compatible = "chrp,iic"; + interrupts = <1>; + interrupt-parent = <&pci0>; + }; + }; + + pci1: pci@e0009000 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x15 */ + 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 + 0xa800 0x0 0x0 0x2 &mpic 0xb 0x1 + 0xa800 0x0 0x0 0x3 &mpic 0xb 0x1 + 0xa800 0x0 0x0 0x4 &mpic 0xb 0x1>; + interrupt-parent = <&mpic>; + interrupts = <25 2>; + bus-range = <0 0>; + ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0009000 0x1000>; + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + }; +}; diff --git a/arch/powerpc/boot/dts/tqm8540.dts b/arch/powerpc/boot/dts/tqm8540.dts index 7134753..15ca731 100644 --- a/arch/powerpc/boot/dts/tqm8540.dts +++ b/arch/powerpc/boot/dts/tqm8540.dts @@ -289,7 +289,14 @@ interrupt-map = < /* IDSEL 28 */ 0xe000 0 0 1 &mpic 2 1 - 0xe000 0 0 2 &mpic 3 1>; + 0xe000 0 0 2 &mpic 3 1 + 0xe000 0 0 3 &mpic 6 1 + 0xe000 0 0 4 &mpic 5 1 + + /* IDSEL 11 */ + 0x5800 0 0 1 &mpic 6 1 + 0x5800 0 0 2 &mpic 5 1 + >; interrupt-parent = <&mpic>; interrupts = <24 2>; diff --git a/arch/powerpc/boot/dts/tqm8541.dts b/arch/powerpc/boot/dts/tqm8541.dts index b30f637..f49d091 100644 --- a/arch/powerpc/boot/dts/tqm8541.dts +++ b/arch/powerpc/boot/dts/tqm8541.dts @@ -311,7 +311,14 @@ interrupt-map = < /* IDSEL 28 */ 0xe000 0 0 1 &mpic 2 1 - 0xe000 0 0 2 &mpic 3 1>; + 0xe000 0 0 2 &mpic 3 1 + 0xe000 0 0 3 &mpic 6 1 + 0xe000 0 0 4 &mpic 5 1 + + /* IDSEL 11 */ + 0x5800 0 0 1 &mpic 6 1 + 0x5800 0 0 2 &mpic 5 1 + >; interrupt-parent = <&mpic>; interrupts = <24 2>; diff --git a/arch/powerpc/boot/dts/tqm8548-bigflash.dts b/arch/powerpc/boot/dts/tqm8548-bigflash.dts index 61f25e1..5dbb36e 100644 --- a/arch/powerpc/boot/dts/tqm8548-bigflash.dts +++ b/arch/powerpc/boot/dts/tqm8548-bigflash.dts @@ -442,7 +442,14 @@ interrupt-map = < /* IDSEL 28 */ 0xe000 0 0 1 &mpic 2 1 - 0xe000 0 0 2 &mpic 3 1>; + 0xe000 0 0 2 &mpic 3 1 + 0xe000 0 0 3 &mpic 6 1 + 0xe000 0 0 4 &mpic 5 1 + + /* IDSEL 11 */ + 0x5800 0 0 1 &mpic 6 1 + 0x5800 0 0 2 &mpic 5 1 + >; interrupt-parent = <&mpic>; interrupts = <24 2>; diff --git a/arch/powerpc/boot/dts/tqm8548.dts b/arch/powerpc/boot/dts/tqm8548.dts index 025759c..a050ae4 100644 --- a/arch/powerpc/boot/dts/tqm8548.dts +++ b/arch/powerpc/boot/dts/tqm8548.dts @@ -442,7 +442,14 @@ interrupt-map = < /* IDSEL 28 */ 0xe000 0 0 1 &mpic 2 1 - 0xe000 0 0 2 &mpic 3 1>; + 0xe000 0 0 2 &mpic 3 1 + 0xe000 0 0 3 &mpic 6 1 + 0xe000 0 0 4 &mpic 5 1 + + /* IDSEL 11 */ + 0x5800 0 0 1 &mpic 6 1 + 0x5800 0 0 2 &mpic 5 1 + >; interrupt-parent = <&mpic>; interrupts = <24 2>; diff --git a/arch/powerpc/boot/dts/tqm8555.dts b/arch/powerpc/boot/dts/tqm8555.dts index 95e2873..81bad8c 100644 --- a/arch/powerpc/boot/dts/tqm8555.dts +++ b/arch/powerpc/boot/dts/tqm8555.dts @@ -311,7 +311,14 @@ interrupt-map = < /* IDSEL 28 */ 0xe000 0 0 1 &mpic 2 1 - 0xe000 0 0 2 &mpic 3 1>; + 0xe000 0 0 2 &mpic 3 1 + 0xe000 0 0 3 &mpic 6 1 + 0xe000 0 0 4 &mpic 5 1 + + /* IDSEL 11 */ + 0x5800 0 0 1 &mpic 6 1 + 0x5800 0 0 2 &mpic 5 1 + >; interrupt-parent = <&mpic>; interrupts = <24 2>; diff --git a/arch/powerpc/boot/dts/tqm8560.dts b/arch/powerpc/boot/dts/tqm8560.dts index ff70580..22ec39b 100644 --- a/arch/powerpc/boot/dts/tqm8560.dts +++ b/arch/powerpc/boot/dts/tqm8560.dts @@ -382,7 +382,14 @@ interrupt-map = < /* IDSEL 28 */ 0xe000 0 0 1 &mpic 2 1 - 0xe000 0 0 2 &mpic 3 1>; + 0xe000 0 0 2 &mpic 3 1 + 0xe000 0 0 3 &mpic 6 1 + 0xe000 0 0 4 &mpic 5 1 + + /* IDSEL 11 */ + 0x5800 0 0 1 &mpic 6 1 + 0x5800 0 0 2 &mpic 5 1 + >; interrupt-parent = <&mpic>; interrupts = <24 2>; diff --git a/arch/powerpc/boot/dts/tqm8xx.dts b/arch/powerpc/boot/dts/tqm8xx.dts new file mode 100644 index 0000000..f6da7ec --- /dev/null +++ b/arch/powerpc/boot/dts/tqm8xx.dts @@ -0,0 +1,172 @@ +/* + * TQM8XX Device Tree Source + * + * Heiko Schocher <hs@denx.de> + * 2010 DENX Software Engineering GmbH + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "TQM8xx"; + compatible = "tqc,tqm8xx"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = ð0; + ethernet1 = ð1; + mdio1 = &phy1; + serial0 = &smc1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,860@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <16>; // 16 bytes + i-cache-line-size = <16>; // 16 bytes + d-cache-size = <0x1000>; // L1, 4K + i-cache-size = <0x1000>; // L1, 4K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + interrupts = <15 2>; // decrementer interrupt + interrupt-parent = <&PIC>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x2000000>; + }; + + localbus@fff00100 { + compatible = "fsl,mpc860-localbus", "fsl,pq1-localbus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0xfff00100 0x40>; + + ranges = < + 0x0 0x0 0x40000000 0x800000 + >; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x800000>; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <4>; + device-width = <2>; + }; + }; + + soc@fff00000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x0 0xfff00000 0x00004000>; + + phy1: mdio@e00 { + compatible = "fsl,mpc866-fec-mdio", "fsl,pq1-fec-mdio"; + reg = <0xe00 0x188>; + #address-cells = <1>; + #size-cells = <0>; + PHY: ethernet-phy@f { + reg = <0xf>; + device_type = "ethernet-phy"; + }; + }; + + eth1: ethernet@e00 { + device_type = "network"; + compatible = "fsl,mpc866-fec-enet", + "fsl,pq1-fec-enet"; + reg = <0xe00 0x188>; + interrupts = <3 1>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY>; + linux,network-index = <1>; + }; + + PIC: pic@0 { + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x24>; + compatible = "fsl,mpc860-pic", "fsl,pq1-pic"; + }; + + cpm@9c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc860-cpm", "fsl,cpm1"; + ranges; + reg = <0x9c0 0x40>; + brg-frequency = <0>; + interrupts = <0 2>; // cpm error interrupt + interrupt-parent = <&CPM_PIC>; + + muram@2000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2000 0x2000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0x0 0x2000>; + }; + }; + + brg@9f0 { + compatible = "fsl,mpc860-brg", + "fsl,cpm1-brg", + "fsl,cpm-brg"; + reg = <0x9f0 0x10>; + clock-frequency = <0>; + }; + + CPM_PIC: pic@930 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + interrupts = <5 2 0 2>; + interrupt-parent = <&PIC>; + reg = <0x930 0x20>; + compatible = "fsl,mpc860-cpm-pic", + "fsl,cpm1-pic"; + }; + + + smc1: serial@a80 { + device_type = "serial"; + compatible = "fsl,mpc860-smc-uart", + "fsl,cpm1-smc-uart"; + reg = <0xa80 0x10 0x3e80 0x40>; + interrupts = <4>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <0x90>; + }; + + eth0: ethernet@a00 { + device_type = "network"; + compatible = "fsl,mpc860-scc-enet", + "fsl,cpm1-scc-enet"; + reg = <0xa00 0x18 0x3c00 0x100>; + interrupts = <30>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-command = <0000>; + linux,network-index = <0>; + fixed-link = <0 0 10 0 0>; + }; + }; + }; +}; diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index cfebef9..d32f31a 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -19,7 +19,8 @@ CONFIG_E500=y CONFIG_FSL_EMB_PERFMON=y CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y -# CONFIG_PHYS_64BIT is not set +CONFIG_PTE_64BIT=y +CONFIG_PHYS_64BIT=y CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y CONFIG_PPC_MMU_NOHASH_32=y @@ -28,7 +29,7 @@ CONFIG_PPC_BOOK3E_MMU=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -239,6 +240,7 @@ CONFIG_MPC85xx_MDS=y CONFIG_MPC8536_DS=y CONFIG_MPC85xx_DS=y CONFIG_MPC85xx_RDB=y +CONFIG_P1022_DS=y CONFIG_SOCRATES=y CONFIG_KSI8560=y CONFIG_XES_MPC85xx=y @@ -311,7 +313,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y @@ -321,7 +323,7 @@ CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set # CONFIG_PPC_256K_PAGES is not set -CONFIG_FORCE_MAX_ZONEORDER=11 +CONFIG_FORCE_MAX_ZONEORDER=12 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set CONFIG_EXTRA_TARGETS="" @@ -1122,16 +1124,13 @@ CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y CONFIG_SOUND=y -CONFIG_SOUND_OSS_CORE=y -CONFIG_SOUND_OSS_CORE_PRECLAIM=y +# CONFIG_SOUND_OSS_CORE is not set CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y # CONFIG_SND_SEQUENCER is not set -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=y -CONFIG_SND_PCM_OSS=y -CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set # CONFIG_SND_HRTIMER is not set # CONFIG_SND_DYNAMIC_MINORS is not set # CONFIG_SND_SUPPORT_OLD_API is not set @@ -1145,12 +1144,7 @@ CONFIG_SND_VMASTER=y # CONFIG_SND_SBAWE_SEQ is not set # CONFIG_SND_EMU10K1_SEQ is not set CONFIG_SND_AC97_CODEC=y -CONFIG_SND_DRIVERS=y -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set -# CONFIG_SND_AC97_POWER_SAVE is not set +# CONFIG_SND_DRIVERS is not set CONFIG_SND_PCI=y # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set @@ -1218,12 +1212,8 @@ CONFIG_SND_INTEL8X0=y # CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set -CONFIG_SND_PPC=y -CONFIG_SND_USB=y -# CONFIG_SND_USB_AUDIO is not set -# CONFIG_SND_USB_UA101 is not set -# CONFIG_SND_USB_USX2Y is not set -# CONFIG_SND_USB_CAIAQ is not set +# CONFIG_SND_PPC is not set +# CONFIG_SND_USB is not set # CONFIG_SND_SOC is not set # CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=y diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig index f5451d8..f93de10 100644 --- a/arch/powerpc/configs/mpc85xx_smp_defconfig +++ b/arch/powerpc/configs/mpc85xx_smp_defconfig @@ -19,7 +19,8 @@ CONFIG_E500=y CONFIG_FSL_EMB_PERFMON=y CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y -# CONFIG_PHYS_64BIT is not set +CONFIG_PTE_64BIT=y +CONFIG_PHYS_64BIT=y CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y CONFIG_PPC_MMU_NOHASH_32=y @@ -29,7 +30,7 @@ CONFIG_SMP=y CONFIG_NR_CPUS=8 CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -243,6 +244,7 @@ CONFIG_MPC85xx_MDS=y CONFIG_MPC8536_DS=y CONFIG_MPC85xx_DS=y CONFIG_MPC85xx_RDB=y +CONFIG_P1022_DS=y CONFIG_SOCRATES=y CONFIG_KSI8560=y CONFIG_XES_MPC85xx=y @@ -316,7 +318,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y @@ -326,7 +328,7 @@ CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set # CONFIG_PPC_256K_PAGES is not set -CONFIG_FORCE_MAX_ZONEORDER=11 +CONFIG_FORCE_MAX_ZONEORDER=12 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set CONFIG_EXTRA_TARGETS="" @@ -1127,16 +1129,13 @@ CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y CONFIG_SOUND=y -CONFIG_SOUND_OSS_CORE=y -CONFIG_SOUND_OSS_CORE_PRECLAIM=y +# CONFIG_SOUND_OSS_CORE is not set CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y # CONFIG_SND_SEQUENCER is not set -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=y -CONFIG_SND_PCM_OSS=y -CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set # CONFIG_SND_HRTIMER is not set # CONFIG_SND_DYNAMIC_MINORS is not set # CONFIG_SND_SUPPORT_OLD_API is not set @@ -1150,12 +1149,7 @@ CONFIG_SND_VMASTER=y # CONFIG_SND_SBAWE_SEQ is not set # CONFIG_SND_EMU10K1_SEQ is not set CONFIG_SND_AC97_CODEC=y -CONFIG_SND_DRIVERS=y -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set -# CONFIG_SND_AC97_POWER_SAVE is not set +# CONFIG_SND_DRIVERS is not set CONFIG_SND_PCI=y # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set @@ -1223,12 +1217,8 @@ CONFIG_SND_INTEL8X0=y # CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set -CONFIG_SND_PPC=y -CONFIG_SND_USB=y -# CONFIG_SND_USB_AUDIO is not set -# CONFIG_SND_USB_UA101 is not set -# CONFIG_SND_USB_USX2Y is not set -# CONFIG_SND_USB_CAIAQ is not set +# CONFIG_SND_PPC is not set +# CONFIG_SND_USB is not set # CONFIG_SND_SOC is not set # CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=y diff --git a/arch/powerpc/configs/tqm8xx_defconfig b/arch/powerpc/configs/tqm8xx_defconfig new file mode 100644 index 0000000..85e654b --- /dev/null +++ b/arch/powerpc/configs/tqm8xx_defconfig @@ -0,0 +1,934 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.34-rc1 +# Tue Mar 23 08:22:15 2010 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +# CONFIG_PPC_BOOK3S_32 is not set +# CONFIG_PPC_85xx is not set +CONFIG_PPC_8xx=y +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_8xx=y +CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y +# CONFIG_PPC_MM_SLICES is not set +CONFIG_NOT_COHERENT_CACHE=y +CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set +CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +# CONFIG_PPC_UDBG_16550 is not set +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +CONFIG_DTC=y +# CONFIG_DEFAULT_UIMAGE is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_ELF_CORE is not set +# CONFIG_BASE_FULL is not set +# CONFIG_FUTEX is not set +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set +# CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y +CONFIG_BASE_SMALL=1 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="deadline" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set +# CONFIG_FREEZER is not set + +# +# Platform support +# +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +CONFIG_CPM1=y +# CONFIG_MPC8XXFADS is not set +# CONFIG_MPC86XADS is not set +# CONFIG_MPC885ADS is not set +# CONFIG_PPC_EP88XC is not set +# CONFIG_PPC_ADDER875 is not set +# CONFIG_PPC_MGSUVD is not set +CONFIG_TQM8XX=y + +# +# MPC8xx CPM Options +# + +# +# Generic MPC8xx Options +# +CONFIG_8xx_COPYBACK=y +# CONFIG_8xx_GPIO is not set +# CONFIG_8xx_CPU6 is not set +# CONFIG_8xx_CPU15 is not set +CONFIG_NO_UCODE_PATCH=y +# CONFIG_USB_SOF_UCODE_PATCH is not set +# CONFIG_I2C_SPI_UCODE_PATCH is not set +# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set +# CONFIG_PQ2ADS is not set +# CONFIG_IPIC is not set +# CONFIG_MPIC is not set +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_QUICC_ENGINE is not set +# CONFIG_FSL_ULI1575 is not set +CONFIG_CPM=y +# CONFIG_SIMPLE_GPIO is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_HZ_100=y +# CONFIG_HZ_250 is not set +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=100 +CONFIG_SCHED_HRTICK=y +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_MATH_EMULATION is not set +CONFIG_8XX_MINIMAL_FPEMU=y +# CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y +CONFIG_MAX_ACTIVE_REGIONS=32 +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set +CONFIG_FORCE_MAX_ZONEORDER=11 +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" +# CONFIG_PM is not set +# CONFIG_SECCOMP is not set +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_FSL_SOC=y +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS is not set +# CONFIG_PCI_SYSCALL is not set +# CONFIG_PCI_QSPAN is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set +# CONFIG_HAS_RAPIDIO is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_CFI_FLAGADM is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y +CONFIG_OF_DEVICE=y +CONFIG_OF_MDIO=y +# CONFIG_PARPORT is not set +# CONFIG_BLK_DEV is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +CONFIG_DAVICOM_PHY=y +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +CONFIG_FIXED_PHY=y +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_XILINX_EMACLITE is not set +CONFIG_FS_ENET=y +CONFIG_FS_ENET_HAS_SCC=y +CONFIG_FS_ENET_HAS_FEC=y +CONFIG_FS_ENET_MDIO_FEC=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_WLAN is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_CPM=y +CONFIG_SERIAL_CPM_CONSOLE=y +# CONFIG_SERIAL_TIMBERDALE is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_HVC_UDBG is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_NVRAM is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_SOUND is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_EDAC is not set +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +# CONFIG_PROC_KCORE is not set +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_LOGFS is not set +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +# CONFIG_NLS is not set +# CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +# CONFIG_CRC32 is not set +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_DEBUG_PAGEALLOC is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y +CONFIG_PRINT_STACK_DEPTH=64 +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set +# CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +# CONFIG_CRYPTO is not set +CONFIG_PPC_CLOCK=y +CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/include/asm/abs_addr.h b/arch/powerpc/include/asm/abs_addr.h index 9a846ef..5ab0b71 100644 --- a/arch/powerpc/include/asm/abs_addr.h +++ b/arch/powerpc/include/asm/abs_addr.h @@ -69,7 +69,7 @@ static inline unsigned long phys_to_abs(unsigned long pa) * Legacy iSeries Hypervisor calls */ #define iseries_hv_addr(virtaddr) \ - (0x8000000000000000 | virt_to_abs(virtaddr)) + (0x8000000000000000UL | virt_to_abs(virtaddr)) #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_ABS_ADDR_H */ diff --git a/arch/powerpc/include/asm/asm-compat.h b/arch/powerpc/include/asm/asm-compat.h index 2048a6a..decad95 100644 --- a/arch/powerpc/include/asm/asm-compat.h +++ b/arch/powerpc/include/asm/asm-compat.h @@ -30,6 +30,7 @@ #define PPC_STLCX stringify_in_c(stdcx.) #define PPC_CNTLZL stringify_in_c(cntlzd) #define PPC_LR_STKOFF 16 +#define PPC_MIN_STKFRM 112 /* Move to CR, single-entry optimized version. Only available * on POWER4 and later. @@ -55,6 +56,7 @@ #define PPC_CNTLZL stringify_in_c(cntlzw) #define PPC_MTOCRF stringify_in_c(mtcrf) #define PPC_LR_STKOFF 4 +#define PPC_MIN_STKFRM 16 #endif diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h index b0b2113..5e2e2cf 100644 --- a/arch/powerpc/include/asm/cputable.h +++ b/arch/powerpc/include/asm/cputable.h @@ -517,6 +517,10 @@ static inline int cpu_has_feature(unsigned long feature) & feature); } +#ifdef CONFIG_HAVE_HW_BREAKPOINT +#define HBP_NUM 1 +#endif /* CONFIG_HAVE_HW_BREAKPOINT */ + #endif /* !__ASSEMBLY__ */ #endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/dbell.h b/arch/powerpc/include/asm/dbell.h index 501189a..0893ab9 100644 --- a/arch/powerpc/include/asm/dbell.h +++ b/arch/powerpc/include/asm/dbell.h @@ -27,10 +27,10 @@ enum ppc_dbell { PPC_G_DBELL_MC = 4, /* guest mcheck doorbell */ }; -#ifdef CONFIG_SMP -extern unsigned long dbell_smp_message[NR_CPUS]; -extern void smp_dbell_message_pass(int target, int msg); -#endif +extern void doorbell_message_pass(int target, int msg); +extern void doorbell_exception(struct pt_regs *regs); +extern void doorbell_check_self(void); +extern void doorbell_setup_this_cpu(void); static inline void ppc_msgsnd(enum ppc_dbell type, u32 flags, u32 tag) { diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h index 5119b7d..de03ca5 100644 --- a/arch/powerpc/include/asm/hvcall.h +++ b/arch/powerpc/include/asm/hvcall.h @@ -74,6 +74,7 @@ #define H_NOT_ENOUGH_RESOURCES -44 #define H_R_STATE -45 #define H_RESCINDEND -46 +#define H_MULTI_THREADS_ACTIVE -9005 /* Long Busy is a condition that can be returned by the firmware diff --git a/arch/powerpc/include/asm/hw_breakpoint.h b/arch/powerpc/include/asm/hw_breakpoint.h new file mode 100644 index 0000000..1c33ec1 --- /dev/null +++ b/arch/powerpc/include/asm/hw_breakpoint.h @@ -0,0 +1,74 @@ +/* + * PowerPC BookIII S hardware breakpoint definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright 2010, IBM Corporation. + * Author: K.Prasad <prasad@linux.vnet.ibm.com> + * + */ + +#ifndef _PPC_BOOK3S_64_HW_BREAKPOINT_H +#define _PPC_BOOK3S_64_HW_BREAKPOINT_H + +#ifdef __KERNEL__ +#ifdef CONFIG_HAVE_HW_BREAKPOINT + +struct arch_hw_breakpoint { + bool extraneous_interrupt; + u8 len; /* length of the target data symbol */ + int type; + unsigned long address; +}; + +#include <linux/kdebug.h> +#include <asm/reg.h> +#include <asm/system.h> + +struct perf_event; +struct pmu; +struct perf_sample_data; + +#define HW_BREAKPOINT_ALIGN 0x7 +/* Maximum permissible length of any HW Breakpoint */ +#define HW_BREAKPOINT_LEN 0x8 + +extern int hw_breakpoint_slots(int type); +extern int arch_bp_generic_fields(int type, int *gen_bp_type); +extern int arch_check_bp_in_kernelspace(struct perf_event *bp); +extern int arch_validate_hwbkpt_settings(struct perf_event *bp); +extern int hw_breakpoint_exceptions_notify(struct notifier_block *unused, + unsigned long val, void *data); +int arch_install_hw_breakpoint(struct perf_event *bp); +void arch_uninstall_hw_breakpoint(struct perf_event *bp); +void hw_breakpoint_pmu_read(struct perf_event *bp); +extern void flush_ptrace_hw_breakpoint(struct task_struct *tsk); + +extern struct pmu perf_ops_bp; +extern void ptrace_triggered(struct perf_event *bp, int nmi, + struct perf_sample_data *data, struct pt_regs *regs); +static inline void hw_breakpoint_disable(void) +{ + set_dabr(0); +} +extern void thread_change_pc(struct task_struct *tsk, struct pt_regs *regs); + +#else /* CONFIG_HAVE_HW_BREAKPOINT */ +static inline void hw_breakpoint_disable(void) { } +static inline void thread_change_pc(struct task_struct *tsk, + struct pt_regs *regs) { } +#endif /* CONFIG_HAVE_HW_BREAKPOINT */ +#endif /* __KERNEL__ */ +#endif /* _PPC_BOOK3S_64_HW_BREAKPOINT_H */ diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h index 9f0fc9e..adc8e6c 100644 --- a/arch/powerpc/include/asm/machdep.h +++ b/arch/powerpc/include/asm/machdep.h @@ -266,6 +266,7 @@ struct machdep_calls { void (*suspend_disable_irqs)(void); void (*suspend_enable_irqs)(void); #endif + int (*suspend_disable_cpu)(void); #ifdef CONFIG_ARCH_CPU_PROBE_RELEASE ssize_t (*cpu_probe)(const char *, size_t); @@ -277,6 +278,7 @@ extern void e500_idle(void); extern void power4_idle(void); extern void power4_cpu_offline_powersave(void); extern void ppc6xx_idle(void); +extern void book3e_idle(void); /* * ppc_md contains a copy of the machine description structure for the @@ -366,8 +368,5 @@ static inline void log_error(char *buf, unsigned int err_type, int fatal) #define machine_late_initcall(mach,fn) __define_machine_initcall(mach,"7",fn,7) #define machine_late_initcall_sync(mach,fn) __define_machine_initcall(mach,"7s",fn,7s) -void generic_suspend_disable_irqs(void); -void generic_suspend_enable_irqs(void); - #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_MACHDEP_H */ diff --git a/arch/powerpc/include/asm/mmu-book3e.h b/arch/powerpc/include/asm/mmu-book3e.h index 7469581..87a1d78 100644 --- a/arch/powerpc/include/asm/mmu-book3e.h +++ b/arch/powerpc/include/asm/mmu-book3e.h @@ -193,6 +193,10 @@ struct mmu_psize_def { unsigned int shift; /* number of bits */ unsigned int enc; /* PTE encoding */ + unsigned int ind; /* Corresponding indirect page size shift */ + unsigned int flags; +#define MMU_PAGE_SIZE_DIRECT 0x1 /* Supported as a direct size */ +#define MMU_PAGE_SIZE_INDIRECT 0x2 /* Supported as an indirect size */ }; extern struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT]; diff --git a/arch/powerpc/include/asm/mpc5121.h b/arch/powerpc/include/asm/mpc5121.h index e6a30bb..8c0ab2c 100644 --- a/arch/powerpc/include/asm/mpc5121.h +++ b/arch/powerpc/include/asm/mpc5121.h @@ -21,4 +21,36 @@ struct mpc512x_reset_module { u32 rcer; /* Reset Control Enable Register */ }; +/* + * Clock Control Module + */ +struct mpc512x_ccm { + u32 spmr; /* System PLL Mode Register */ + u32 sccr1; /* System Clock Control Register 1 */ + u32 sccr2; /* System Clock Control Register 2 */ + u32 scfr1; /* System Clock Frequency Register 1 */ + u32 scfr2; /* System Clock Frequency Register 2 */ + u32 scfr2s; /* System Clock Frequency Shadow Register 2 */ + u32 bcr; /* Bread Crumb Register */ + u32 p0ccr; /* PSC0 Clock Control Register */ + u32 p1ccr; /* PSC1 CCR */ + u32 p2ccr; /* PSC2 CCR */ + u32 p3ccr; /* PSC3 CCR */ + u32 p4ccr; /* PSC4 CCR */ + u32 p5ccr; /* PSC5 CCR */ + u32 p6ccr; /* PSC6 CCR */ + u32 p7ccr; /* PSC7 CCR */ + u32 p8ccr; /* PSC8 CCR */ + u32 p9ccr; /* PSC9 CCR */ + u32 p10ccr; /* PSC10 CCR */ + u32 p11ccr; /* PSC11 CCR */ + u32 spccr; /* SPDIF Clock Control Register */ + u32 cccr; /* CFM Clock Control Register */ + u32 dccr; /* DIU Clock Control Register */ + u32 m1ccr; /* MSCAN1 CCR */ + u32 m2ccr; /* MSCAN2 CCR */ + u32 m3ccr; /* MSCAN3 CCR */ + u32 m4ccr; /* MSCAN4 CCR */ + u8 res[0x98]; /* Reserved */ +}; #endif /* __ASM_POWERPC_MPC5121_H__ */ diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h index 8ce7963..1ff6662 100644 --- a/arch/powerpc/include/asm/paca.h +++ b/arch/powerpc/include/asm/paca.h @@ -146,7 +146,7 @@ struct paca_struct { extern struct paca_struct *paca; extern __initdata struct paca_struct boot_paca; extern void initialise_paca(struct paca_struct *new_paca, int cpu); - +extern void setup_paca(struct paca_struct *new_paca); extern void allocate_pacas(void); extern void free_unused_pacas(void); diff --git a/arch/powerpc/include/asm/percpu.h b/arch/powerpc/include/asm/percpu.h index f879252..2cedefd 100644 --- a/arch/powerpc/include/asm/percpu.h +++ b/arch/powerpc/include/asm/percpu.h @@ -1,7 +1,6 @@ #ifndef _ASM_POWERPC_PERCPU_H_ #define _ASM_POWERPC_PERCPU_H_ #ifdef __powerpc64__ -#include <linux/compiler.h> /* * Same as asm-generic/percpu.h, except that we store the per cpu offset @@ -12,9 +11,7 @@ #include <asm/paca.h> -#define __per_cpu_offset(cpu) (paca[cpu].data_offset) #define __my_cpu_offset local_paca->data_offset -#define per_cpu_offset(x) (__per_cpu_offset(x)) #endif /* CONFIG_SMP */ #endif /* __powerpc64__ */ diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h index d553bbe..43adc8b 100644 --- a/arch/powerpc/include/asm/ppc-opcode.h +++ b/arch/powerpc/include/asm/ppc-opcode.h @@ -52,13 +52,17 @@ #define PPC_INST_WAIT 0x7c00007c #define PPC_INST_TLBIVAX 0x7c000624 #define PPC_INST_TLBSRX_DOT 0x7c0006a5 +#define PPC_INST_XXLOR 0xf0000510 /* macros to insert fields into opcodes */ #define __PPC_RA(a) (((a) & 0x1f) << 16) #define __PPC_RB(b) (((b) & 0x1f) << 11) #define __PPC_RS(s) (((s) & 0x1f) << 21) #define __PPC_RT(s) __PPC_RS(s) +#define __PPC_XA(a) ((((a) & 0x1f) << 16) | (((a) & 0x20) >> 3)) +#define __PPC_XB(b) ((((b) & 0x1f) << 11) | (((b) & 0x20) >> 4)) #define __PPC_XS(s) ((((s) & 0x1f) << 21) | (((s) & 0x20) >> 5)) +#define __PPC_XT(s) __PPC_XS(s) #define __PPC_T_TLB(t) (((t) & 0x3) << 21) #define __PPC_WC(w) (((w) & 0x3) << 21) /* @@ -106,9 +110,12 @@ * the 128 bit load store instructions based on that. */ #define VSX_XX1(s, a, b) (__PPC_XS(s) | __PPC_RA(a) | __PPC_RB(b)) +#define VSX_XX3(t, a, b) (__PPC_XT(t) | __PPC_XA(a) | __PPC_XB(b)) #define STXVD2X(s, a, b) stringify_in_c(.long PPC_INST_STXVD2X | \ VSX_XX1((s), (a), (b))) #define LXVD2X(s, a, b) stringify_in_c(.long PPC_INST_LXVD2X | \ VSX_XX1((s), (a), (b))) +#define XXLOR(t, a, b) stringify_in_c(.long PPC_INST_XXLOR | \ + VSX_XX3((t), (a), (b))) #endif /* _ASM_POWERPC_PPC_OPCODE_H */ diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 7492fe8..19c05b0 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -209,6 +209,14 @@ struct thread_struct { #ifdef CONFIG_PPC64 unsigned long start_tb; /* Start purr when proc switched in */ unsigned long accum_tb; /* Total accumilated purr for process */ +#ifdef CONFIG_HAVE_HW_BREAKPOINT + struct perf_event *ptrace_bps[HBP_NUM]; + /* + * Helps identify source of single-step exception and subsequent + * hw-breakpoint enablement + */ + struct perf_event *last_hit_ubp; +#endif /* CONFIG_HAVE_HW_BREAKPOINT */ #endif unsigned long dabr; /* Data address breakpoint register */ #ifdef CONFIG_ALTIVEC diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index d62fdf4..d8be016 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -890,7 +890,7 @@ #ifndef __ASSEMBLY__ #define mfmsr() ({unsigned long rval; \ asm volatile("mfmsr %0" : "=r" (rval)); rval;}) -#ifdef CONFIG_PPC64 +#ifdef CONFIG_PPC_BOOK3S_64 #define __mtmsrd(v, l) asm volatile("mtmsrd %0," __stringify(l) \ : : "r" (v) : "memory") #define mtmsrd(v) __mtmsrd((v), 0) diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h index 2360317..667a498 100644 --- a/arch/powerpc/include/asm/reg_booke.h +++ b/arch/powerpc/include/asm/reg_booke.h @@ -29,8 +29,8 @@ #if defined(CONFIG_PPC_BOOK3E_64) #define MSR_ MSR_ME | MSR_CE #define MSR_KERNEL MSR_ | MSR_CM -#define MSR_USER32 MSR_ | MSR_PR | MSR_EE -#define MSR_USER64 MSR_USER32 | MSR_CM +#define MSR_USER32 MSR_ | MSR_PR | MSR_EE | MSR_DE +#define MSR_USER64 MSR_USER32 | MSR_CM | MSR_DE #elif defined (CONFIG_40x) #define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR|MSR_CE) #define MSR_USER (MSR_KERNEL|MSR_PR|MSR_EE) @@ -62,6 +62,7 @@ #define SPRN_TLB0PS 0x158 /* TLB 0 Page Size Register */ #define SPRN_MAS5_MAS6 0x15c /* MMU Assist Register 5 || 6 */ #define SPRN_MAS8_MAS1 0x15d /* MMU Assist Register 8 || 1 */ +#define SPRN_EPTCFG 0x15e /* Embedded Page Table Config */ #define SPRN_MAS7_MAS3 0x174 /* MMU Assist Register 7 || 3 */ #define SPRN_MAS0_MAS1 0x175 /* MMU Assist Register 0 || 1 */ #define SPRN_IVOR0 0x190 /* Interrupt Vector Offset Register 0 */ diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h index 20de73c..3d35f8a 100644 --- a/arch/powerpc/include/asm/rtas.h +++ b/arch/powerpc/include/asm/rtas.h @@ -63,6 +63,14 @@ struct rtas_t { struct device_node *dev; /* virtual address pointer */ }; +struct rtas_suspend_me_data { + atomic_t working; /* number of cpus accessing this struct */ + atomic_t done; + int token; /* ibm,suspend-me */ + atomic_t error; + struct completion *complete; /* wait on this until working == 0 */ +}; + /* RTAS event classes */ #define RTAS_INTERNAL_ERROR 0x80000000 /* set bit 0 */ #define RTAS_EPOW_WARNING 0x40000000 /* set bit 1 */ @@ -137,6 +145,9 @@ struct rtas_t { #define RTAS_TYPE_PMGM_CONFIG_CHANGE 0x70 #define RTAS_TYPE_PMGM_SERVICE_PROC 0x71 +/* RTAS check-exception vector offset */ +#define RTAS_VECTOR_EXTERNAL_INTERRUPT 0x500 + struct rtas_error_log { unsigned long version:8; /* Architectural version */ unsigned long severity:3; /* Severity level of error */ @@ -174,6 +185,8 @@ extern int rtas_set_indicator(int indicator, int index, int new_value); extern int rtas_set_indicator_fast(int indicator, int index, int new_value); extern void rtas_progress(char *s, unsigned short hex); extern void rtas_initialize(void); +extern int rtas_suspend_cpu(struct rtas_suspend_me_data *data); +extern int rtas_suspend_last_cpu(struct rtas_suspend_me_data *data); struct rtc_time; extern unsigned long rtas_get_boot_time(void); diff --git a/arch/powerpc/include/asm/time.h b/arch/powerpc/include/asm/time.h index 27ccb76..dc779df 100644 --- a/arch/powerpc/include/asm/time.h +++ b/arch/powerpc/include/asm/time.h @@ -28,16 +28,12 @@ extern unsigned long tb_ticks_per_jiffy; extern unsigned long tb_ticks_per_usec; extern unsigned long tb_ticks_per_sec; -extern u64 tb_to_xs; -extern unsigned tb_to_us; struct rtc_time; extern void to_tm(int tim, struct rtc_time * tm); extern void GregorianDay(struct rtc_time *tm); -extern time_t last_rtc_update; extern void generic_calibrate_decr(void); -extern void wakeup_decrementer(void); extern void snapshot_timebase(void); extern void set_dec_cpu6(unsigned int val); @@ -204,9 +200,6 @@ static inline unsigned long tb_ticks_since(unsigned long tstamp) extern u64 mulhdu(u64, u64); #endif -extern void smp_space_timers(unsigned int); - -extern unsigned mulhwu_scale_factor(unsigned, unsigned); extern void div128_by_32(u64 dividend_high, u64 dividend_low, unsigned divisor, struct div_result *dr); diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h index 32adf72..3033c1b 100644 --- a/arch/powerpc/include/asm/topology.h +++ b/arch/powerpc/include/asm/topology.h @@ -87,6 +87,9 @@ static inline int pcibus_to_node(struct pci_bus *bus) .balance_interval = 1, \ } +extern int __node_distance(int, int); +#define node_distance(a, b) __node_distance(a, b) + extern void __init dump_numa_cpu_topology(void); extern int sysfs_add_device_to_node(struct sys_device *dev, int nid); diff --git a/arch/powerpc/include/asm/vdso_datapage.h b/arch/powerpc/include/asm/vdso_datapage.h index 13c2c28..08679c5 100644 --- a/arch/powerpc/include/asm/vdso_datapage.h +++ b/arch/powerpc/include/asm/vdso_datapage.h @@ -85,6 +85,7 @@ struct vdso_data { __s32 wtom_clock_sec; /* Wall to monotonic clock */ __s32 wtom_clock_nsec; struct timespec stamp_xtime; /* xtime as at tb_orig_stamp */ + __u32 stamp_sec_fraction; /* fractional seconds of stamp_xtime */ __u32 syscall_map_64[SYSCALL_MAP_SIZE]; /* map of syscalls */ __u32 syscall_map_32[SYSCALL_MAP_SIZE]; /* map of syscalls */ }; @@ -105,6 +106,7 @@ struct vdso_data { __s32 wtom_clock_sec; /* Wall to monotonic clock */ __s32 wtom_clock_nsec; struct timespec stamp_xtime; /* xtime as at tb_orig_stamp */ + __u32 stamp_sec_fraction; /* fractional seconds of stamp_xtime */ __u32 syscall_map_32[SYSCALL_MAP_SIZE]; /* map of syscalls */ __u32 dcache_block_size; /* L1 d-cache block size */ __u32 icache_block_size; /* L1 i-cache block size */ diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 58d0572..77d831a 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -34,9 +34,10 @@ obj-y += vdso32/ obj-$(CONFIG_PPC64) += setup_64.o sys_ppc32.o \ signal_64.o ptrace32.o \ paca.o nvram_64.o firmware.o +obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_ppc970.o cpu_setup_pa6t.o obj64-$(CONFIG_RELOCATABLE) += reloc_64.o -obj-$(CONFIG_PPC_BOOK3E_64) += exceptions-64e.o +obj-$(CONFIG_PPC_BOOK3E_64) += exceptions-64e.o idle_book3e.o obj-$(CONFIG_PPC64) += vdso64/ obj-$(CONFIG_ALTIVEC) += vecemu.o obj-$(CONFIG_PPC_970_NAP) += idle_power4.o @@ -67,6 +68,7 @@ obj64-$(CONFIG_HIBERNATION) += swsusp_asm64.o obj-$(CONFIG_MODULES) += module.o module_$(CONFIG_WORD_SIZE).o obj-$(CONFIG_44x) += cpu_setup_44x.o obj-$(CONFIG_FSL_BOOKE) += cpu_setup_fsl_booke.o dbell.o +obj-$(CONFIG_PPC_BOOK3E_64) += dbell.o extra-y := head_$(CONFIG_WORD_SIZE).o extra-$(CONFIG_PPC_BOOK3E_32) := head_new_booke.o diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index 496cc5b..1c0607d 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -194,7 +194,6 @@ int main(void) DEFINE(PACA_STARTSPURR, offsetof(struct paca_struct, startspurr)); DEFINE(PACA_USER_TIME, offsetof(struct paca_struct, user_time)); DEFINE(PACA_SYSTEM_TIME, offsetof(struct paca_struct, system_time)); - DEFINE(PACA_DATA_OFFSET, offsetof(struct paca_struct, data_offset)); DEFINE(PACA_TRAP_SAVE, offsetof(struct paca_struct, trap_save)); #ifdef CONFIG_KVM_BOOK3S_64_HANDLER DEFINE(PACA_KVM_SVCPU, offsetof(struct paca_struct, shadow_vcpu)); @@ -342,6 +341,7 @@ int main(void) DEFINE(WTOM_CLOCK_SEC, offsetof(struct vdso_data, wtom_clock_sec)); DEFINE(WTOM_CLOCK_NSEC, offsetof(struct vdso_data, wtom_clock_nsec)); DEFINE(STAMP_XTIME, offsetof(struct vdso_data, stamp_xtime)); + DEFINE(STAMP_SEC_FRAC, offsetof(struct vdso_data, stamp_sec_fraction)); DEFINE(CFG_ICACHE_BLOCKSZ, offsetof(struct vdso_data, icache_block_size)); DEFINE(CFG_DCACHE_BLOCKSZ, offsetof(struct vdso_data, dcache_block_size)); DEFINE(CFG_ICACHE_LOGBLOCKSZ, offsetof(struct vdso_data, icache_log_block_size)); diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 87aa0f3..65e2b4e 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -1364,10 +1364,10 @@ static struct cpu_spec __initdata cpu_specs[] = { .machine_check = machine_check_4xx, .platform = "ppc405", }, - { /* 405EX */ - .pvr_mask = 0xffff0004, - .pvr_value = 0x12910004, - .cpu_name = "405EX", + { /* 405EX Rev. A/B with Security */ + .pvr_mask = 0xffff000f, + .pvr_value = 0x12910007, + .cpu_name = "405EX Rev. A/B", .cpu_features = CPU_FTRS_40X, .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, @@ -1377,10 +1377,114 @@ static struct cpu_spec __initdata cpu_specs[] = { .machine_check = machine_check_4xx, .platform = "ppc405", }, - { /* 405EXr */ - .pvr_mask = 0xffff0004, + { /* 405EX Rev. C without Security */ + .pvr_mask = 0xffff000f, + .pvr_value = 0x1291000d, + .cpu_name = "405EX Rev. C", + .cpu_features = CPU_FTRS_40X, + .cpu_user_features = PPC_FEATURE_32 | + PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, + .mmu_features = MMU_FTR_TYPE_40x, + .icache_bsize = 32, + .dcache_bsize = 32, + .machine_check = machine_check_4xx, + .platform = "ppc405", + }, + { /* 405EX Rev. C with Security */ + .pvr_mask = 0xffff000f, + .pvr_value = 0x1291000f, + .cpu_name = "405EX Rev. C", + .cpu_features = CPU_FTRS_40X, + .cpu_user_features = PPC_FEATURE_32 | + PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, + .mmu_features = MMU_FTR_TYPE_40x, + .icache_bsize = 32, + .dcache_bsize = 32, + .machine_check = machine_check_4xx, + .platform = "ppc405", + }, + { /* 405EX Rev. D without Security */ + .pvr_mask = 0xffff000f, + .pvr_value = 0x12910003, + .cpu_name = "405EX Rev. D", + .cpu_features = CPU_FTRS_40X, + .cpu_user_features = PPC_FEATURE_32 | + PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, + .mmu_features = MMU_FTR_TYPE_40x, + .icache_bsize = 32, + .dcache_bsize = 32, + .machine_check = machine_check_4xx, + .platform = "ppc405", + }, + { /* 405EX Rev. D with Security */ + .pvr_mask = 0xffff000f, + .pvr_value = 0x12910005, + .cpu_name = "405EX Rev. D", + .cpu_features = CPU_FTRS_40X, + .cpu_user_features = PPC_FEATURE_32 | + PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, + .mmu_features = MMU_FTR_TYPE_40x, + .icache_bsize = 32, + .dcache_bsize = 32, + .machine_check = machine_check_4xx, + .platform = "ppc405", + }, + { /* 405EXr Rev. A/B without Security */ + .pvr_mask = 0xffff000f, + .pvr_value = 0x12910001, + .cpu_name = "405EXr Rev. A/B", + .cpu_features = CPU_FTRS_40X, + .cpu_user_features = PPC_FEATURE_32 | + PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, + .mmu_features = MMU_FTR_TYPE_40x, + .icache_bsize = 32, + .dcache_bsize = 32, + .machine_check = machine_check_4xx, + .platform = "ppc405", + }, + { /* 405EXr Rev. C without Security */ + .pvr_mask = 0xffff000f, + .pvr_value = 0x12910009, + .cpu_name = "405EXr Rev. C", + .cpu_features = CPU_FTRS_40X, + .cpu_user_features = PPC_FEATURE_32 | + PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, + .mmu_features = MMU_FTR_TYPE_40x, + .icache_bsize = 32, + .dcache_bsize = 32, + .machine_check = machine_check_4xx, + .platform = "ppc405", + }, + { /* 405EXr Rev. C with Security */ + .pvr_mask = 0xffff000f, + .pvr_value = 0x1291000b, + .cpu_name = "405EXr Rev. C", + .cpu_features = CPU_FTRS_40X, + .cpu_user_features = PPC_FEATURE_32 | + PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, + .mmu_features = MMU_FTR_TYPE_40x, + .icache_bsize = 32, + .dcache_bsize = 32, + .machine_check = machine_check_4xx, + .platform = "ppc405", + }, + { /* 405EXr Rev. D without Security */ + .pvr_mask = 0xffff000f, .pvr_value = 0x12910000, - .cpu_name = "405EXr", + .cpu_name = "405EXr Rev. D", + .cpu_features = CPU_FTRS_40X, + .cpu_user_features = PPC_FEATURE_32 | + PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, + .mmu_features = MMU_FTR_TYPE_40x, + .icache_bsize = 32, + .dcache_bsize = 32, + .machine_check = machine_check_4xx, + .platform = "ppc405", + }, + { /* 405EXr Rev. D with Security */ + .pvr_mask = 0xffff000f, + .pvr_value = 0x12910002, + .cpu_name = "405EXr Rev. D", .cpu_features = CPU_FTRS_40X, .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, diff --git a/arch/powerpc/kernel/crash_dump.c b/arch/powerpc/kernel/crash_dump.c index 40f5246..8e05c16 100644 --- a/arch/powerpc/kernel/crash_dump.c +++ b/arch/powerpc/kernel/crash_dump.c @@ -128,9 +128,9 @@ ssize_t copy_oldmem_page(unsigned long pfn, char *buf, if (!csize) return 0; - csize = min(csize, PAGE_SIZE); + csize = min_t(size_t, csize, PAGE_SIZE); - if (pfn < max_pfn) { + if ((min_low_pfn < pfn) && (pfn < max_pfn)) { vaddr = __va(pfn << PAGE_SHIFT); csize = copy_oldmem_vaddr(vaddr, buf, csize, offset, userbuf); } else { diff --git a/arch/powerpc/kernel/dbell.c b/arch/powerpc/kernel/dbell.c index 1493734..3307a52 100644 --- a/arch/powerpc/kernel/dbell.c +++ b/arch/powerpc/kernel/dbell.c @@ -13,32 +13,88 @@ #include <linux/kernel.h> #include <linux/smp.h> #include <linux/threads.h> +#include <linux/percpu.h> #include <asm/dbell.h> +#include <asm/irq_regs.h> #ifdef CONFIG_SMP -unsigned long dbell_smp_message[NR_CPUS]; +struct doorbell_cpu_info { + unsigned long messages; /* current messages bits */ + unsigned int tag; /* tag value */ +}; -void smp_dbell_message_pass(int target, int msg) +static DEFINE_PER_CPU(struct doorbell_cpu_info, doorbell_cpu_info); + +void doorbell_setup_this_cpu(void) +{ + struct doorbell_cpu_info *info = &__get_cpu_var(doorbell_cpu_info); + + info->messages = 0; + info->tag = mfspr(SPRN_PIR) & 0x3fff; +} + +void doorbell_message_pass(int target, int msg) { + struct doorbell_cpu_info *info; int i; - if(target < NR_CPUS) { - set_bit(msg, &dbell_smp_message[target]); - ppc_msgsnd(PPC_DBELL, 0, target); + if (target < NR_CPUS) { + info = &per_cpu(doorbell_cpu_info, target); + set_bit(msg, &info->messages); + ppc_msgsnd(PPC_DBELL, 0, info->tag); } - else if(target == MSG_ALL_BUT_SELF) { + else if (target == MSG_ALL_BUT_SELF) { for_each_online_cpu(i) { if (i == smp_processor_id()) continue; - set_bit(msg, &dbell_smp_message[i]); - ppc_msgsnd(PPC_DBELL, 0, i); + info = &per_cpu(doorbell_cpu_info, i); + set_bit(msg, &info->messages); + ppc_msgsnd(PPC_DBELL, 0, info->tag); } } else { /* target == MSG_ALL */ - for_each_online_cpu(i) - set_bit(msg, &dbell_smp_message[i]); + for_each_online_cpu(i) { + info = &per_cpu(doorbell_cpu_info, i); + set_bit(msg, &info->messages); + } ppc_msgsnd(PPC_DBELL, PPC_DBELL_MSG_BRDCAST, 0); } } -#endif + +void doorbell_exception(struct pt_regs *regs) +{ + struct pt_regs *old_regs = set_irq_regs(regs); + struct doorbell_cpu_info *info = &__get_cpu_var(doorbell_cpu_info); + int msg; + + /* Warning: regs can be NULL when called from irq enable */ + + if (!info->messages || (num_online_cpus() < 2)) + goto out; + + for (msg = 0; msg < 4; msg++) + if (test_and_clear_bit(msg, &info->messages)) + smp_message_recv(msg); + +out: + set_irq_regs(old_regs); +} + +void doorbell_check_self(void) +{ + struct doorbell_cpu_info *info = &__get_cpu_var(doorbell_cpu_info); + + if (!info->messages) + return; + + ppc_msgsnd(PPC_DBELL, 0, info->tag); +} + +#else /* CONFIG_SMP */ +void doorbell_exception(struct pt_regs *regs) +{ + printk(KERN_WARNING "Received doorbell on non-smp system\n"); +} +#endif /* CONFIG_SMP */ + diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S index 24dcc0e..5c43063 100644 --- a/arch/powerpc/kernel/exceptions-64e.S +++ b/arch/powerpc/kernel/exceptions-64e.S @@ -191,6 +191,12 @@ exc_##n##_bad_stack: \ sth r1,PACA_TRAP_SAVE(r13); /* store trap */ \ b bad_stack_book3e; /* bad stack error */ +/* WARNING: If you change the layout of this stub, make sure you chcek + * the debug exception handler which handles single stepping + * into exceptions from userspace, and the MM code in + * arch/powerpc/mm/tlb_nohash.c which patches the branch here + * and would need to be updated if that branch is moved + */ #define EXCEPTION_STUB(loc, label) \ . = interrupt_base_book3e + loc; \ nop; /* To make debug interrupts happy */ \ @@ -204,11 +210,30 @@ exc_##n##_bad_stack: \ lis r,TSR_FIS@h; \ mtspr SPRN_TSR,r +/* Used by asynchronous interrupt that may happen in the idle loop. + * + * This check if the thread was in the idle loop, and if yes, returns + * to the caller rather than the PC. This is to avoid a race if + * interrupts happen before the wait instruction. + */ +#define CHECK_NAPPING() \ + clrrdi r11,r1,THREAD_SHIFT; \ + ld r10,TI_LOCAL_FLAGS(r11); \ + andi. r9,r10,_TLF_NAPPING; \ + beq+ 1f; \ + ld r8,_LINK(r1); \ + rlwinm r7,r10,0,~_TLF_NAPPING; \ + std r8,_NIP(r1); \ + std r7,TI_LOCAL_FLAGS(r11); \ +1: + + #define MASKABLE_EXCEPTION(trapnum, label, hdlr, ack) \ START_EXCEPTION(label); \ NORMAL_EXCEPTION_PROLOG(trapnum, PROLOG_ADDITION_MASKABLE) \ EXCEPTION_COMMON(trapnum, PACA_EXGEN, INTS_DISABLE_ALL) \ ack(r8); \ + CHECK_NAPPING(); \ addi r3,r1,STACK_FRAME_OVERHEAD; \ bl hdlr; \ b .ret_from_except_lite; @@ -246,11 +271,9 @@ interrupt_base_book3e: /* fake trap */ EXCEPTION_STUB(0x1a0, watchdog) /* 0x09f0 */ EXCEPTION_STUB(0x1c0, data_tlb_miss) EXCEPTION_STUB(0x1e0, instruction_tlb_miss) + EXCEPTION_STUB(0x280, doorbell) + EXCEPTION_STUB(0x2a0, doorbell_crit) -#if 0 - EXCEPTION_STUB(0x280, processor_doorbell) - EXCEPTION_STUB(0x220, processor_doorbell_crit) -#endif .globl interrupt_end_book3e interrupt_end_book3e: @@ -259,6 +282,7 @@ interrupt_end_book3e: CRIT_EXCEPTION_PROLOG(0x100, PROLOG_ADDITION_NONE) // EXCEPTION_COMMON(0x100, PACA_EXCRIT, INTS_DISABLE_ALL) // bl special_reg_save_crit +// CHECK_NAPPING(); // addi r3,r1,STACK_FRAME_OVERHEAD // bl .critical_exception // b ret_from_crit_except @@ -270,6 +294,7 @@ interrupt_end_book3e: // EXCEPTION_COMMON(0x200, PACA_EXMC, INTS_DISABLE_ALL) // bl special_reg_save_mc // addi r3,r1,STACK_FRAME_OVERHEAD +// CHECK_NAPPING(); // bl .machine_check_exception // b ret_from_mc_except b . @@ -340,6 +365,7 @@ interrupt_end_book3e: CRIT_EXCEPTION_PROLOG(0x9f0, PROLOG_ADDITION_NONE) // EXCEPTION_COMMON(0x9f0, PACA_EXCRIT, INTS_DISABLE_ALL) // bl special_reg_save_crit +// CHECK_NAPPING(); // addi r3,r1,STACK_FRAME_OVERHEAD // bl .unknown_exception // b ret_from_crit_except @@ -428,6 +454,20 @@ interrupt_end_book3e: kernel_dbg_exc: b . /* NYI */ +/* Doorbell interrupt */ + MASKABLE_EXCEPTION(0x2070, doorbell, .doorbell_exception, ACK_NONE) + +/* Doorbell critical Interrupt */ + START_EXCEPTION(doorbell_crit); + CRIT_EXCEPTION_PROLOG(0x2080, PROLOG_ADDITION_NONE) +// EXCEPTION_COMMON(0x2080, PACA_EXCRIT, INTS_DISABLE_ALL) +// bl special_reg_save_crit +// CHECK_NAPPING(); +// addi r3,r1,STACK_FRAME_OVERHEAD +// bl .doorbell_critical_exception +// b ret_from_crit_except + b . + /* * An interrupt came in while soft-disabled; clear EE in SRR1, @@ -563,6 +603,8 @@ BAD_STACK_TRAMPOLINE(0xd00) BAD_STACK_TRAMPOLINE(0xe00) BAD_STACK_TRAMPOLINE(0xf00) BAD_STACK_TRAMPOLINE(0xf20) +BAD_STACK_TRAMPOLINE(0x2070) +BAD_STACK_TRAMPOLINE(0x2080) .globl bad_stack_book3e bad_stack_book3e: diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index 3e423fb..f53029a 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -828,6 +828,7 @@ END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES) /* We have a data breakpoint exception - handle it */ handle_dabr_fault: + bl .save_nvgprs ld r4,_DAR(r1) ld r5,_DSISR(r1) addi r3,r1,STACK_FRAME_OVERHEAD diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c new file mode 100644 index 0000000..5ecd040 --- /dev/null +++ b/arch/powerpc/kernel/hw_breakpoint.c @@ -0,0 +1,364 @@ +/* + * HW_breakpoint: a unified kernel/user-space hardware breakpoint facility, + * using the CPU's debug registers. Derived from + * "arch/x86/kernel/hw_breakpoint.c" + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright 2010 IBM Corporation + * Author: K.Prasad <prasad@linux.vnet.ibm.com> + * + */ + +#include <linux/hw_breakpoint.h> +#include <linux/notifier.h> +#include <linux/kprobes.h> +#include <linux/percpu.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/init.h> +#include <linux/smp.h> + +#include <asm/hw_breakpoint.h> +#include <asm/processor.h> +#include <asm/sstep.h> +#include <asm/uaccess.h> + +/* + * Stores the breakpoints currently in use on each breakpoint address + * register for every cpu + */ +static DEFINE_PER_CPU(struct perf_event *, bp_per_reg); + +/* + * Returns total number of data or instruction breakpoints available. + */ +int hw_breakpoint_slots(int type) +{ + if (type == TYPE_DATA) + return HBP_NUM; + return 0; /* no instruction breakpoints available */ +} + +/* + * Install a perf counter breakpoint. + * + * We seek a free debug address register and use it for this + * breakpoint. + * + * Atomic: we hold the counter->ctx->lock and we only handle variables + * and registers local to this cpu. + */ +int arch_install_hw_breakpoint(struct perf_event *bp) +{ + struct arch_hw_breakpoint *info = counter_arch_bp(bp); + struct perf_event **slot = &__get_cpu_var(bp_per_reg); + + *slot = bp; + + /* + * Do not install DABR values if the instruction must be single-stepped. + * If so, DABR will be populated in single_step_dabr_instruction(). + */ + if (current->thread.last_hit_ubp != bp) + set_dabr(info->address | info->type | DABR_TRANSLATION); + + return 0; +} + +/* + * Uninstall the breakpoint contained in the given counter. + * + * First we search the debug address register it uses and then we disable + * it. + * + * Atomic: we hold the counter->ctx->lock and we only handle variables + * and registers local to this cpu. + */ +void arch_uninstall_hw_breakpoint(struct perf_event *bp) +{ + struct perf_event **slot = &__get_cpu_var(bp_per_reg); + + if (*slot != bp) { + WARN_ONCE(1, "Can't find the breakpoint"); + return; + } + + *slot = NULL; + set_dabr(0); +} + +/* + * Perform cleanup of arch-specific counters during unregistration + * of the perf-event + */ +void arch_unregister_hw_breakpoint(struct perf_event *bp) +{ + /* + * If the breakpoint is unregistered between a hw_breakpoint_handler() + * and the single_step_dabr_instruction(), then cleanup the breakpoint + * restoration variables to prevent dangling pointers. + */ + if (bp->ctx->task) + bp->ctx->task->thread.last_hit_ubp = NULL; +} + +/* + * Check for virtual address in kernel space. + */ +int arch_check_bp_in_kernelspace(struct perf_event *bp) +{ + struct arch_hw_breakpoint *info = counter_arch_bp(bp); + + return is_kernel_addr(info->address); +} + +int arch_bp_generic_fields(int type, int *gen_bp_type) +{ + switch (type) { + case DABR_DATA_READ: + *gen_bp_type = HW_BREAKPOINT_R; + break; + case DABR_DATA_WRITE: + *gen_bp_type = HW_BREAKPOINT_W; + break; + case (DABR_DATA_WRITE | DABR_DATA_READ): + *gen_bp_type = (HW_BREAKPOINT_W | HW_BREAKPOINT_R); + break; + default: + return -EINVAL; + } + return 0; +} + +/* + * Validate the arch-specific HW Breakpoint register settings + */ +int arch_validate_hwbkpt_settings(struct perf_event *bp) +{ + int ret = -EINVAL; + struct arch_hw_breakpoint *info = counter_arch_bp(bp); + + if (!bp) + return ret; + + switch (bp->attr.bp_type) { + case HW_BREAKPOINT_R: + info->type = DABR_DATA_READ; + break; + case HW_BREAKPOINT_W: + info->type = DABR_DATA_WRITE; + break; + case HW_BREAKPOINT_R | HW_BREAKPOINT_W: + info->type = (DABR_DATA_READ | DABR_DATA_WRITE); + break; + default: + return ret; + } + + info->address = bp->attr.bp_addr; + info->len = bp->attr.bp_len; + + /* + * Since breakpoint length can be a maximum of HW_BREAKPOINT_LEN(8) + * and breakpoint addresses are aligned to nearest double-word + * HW_BREAKPOINT_ALIGN by rounding off to the lower address, the + * 'symbolsize' should satisfy the check below. + */ + if (info->len > + (HW_BREAKPOINT_LEN - (info->address & HW_BREAKPOINT_ALIGN))) + return -EINVAL; + return 0; +} + +/* + * Restores the breakpoint on the debug registers. + * Invoke this function if it is known that the execution context is + * about to change to cause loss of MSR_SE settings. + */ +void thread_change_pc(struct task_struct *tsk, struct pt_regs *regs) +{ + struct arch_hw_breakpoint *info; + + if (likely(!tsk->thread.last_hit_ubp)) + return; + + info = counter_arch_bp(tsk->thread.last_hit_ubp); + regs->msr &= ~MSR_SE; + set_dabr(info->address | info->type | DABR_TRANSLATION); + tsk->thread.last_hit_ubp = NULL; +} + +/* + * Handle debug exception notifications. + */ +int __kprobes hw_breakpoint_handler(struct die_args *args) +{ + int rc = NOTIFY_STOP; + struct perf_event *bp; + struct pt_regs *regs = args->regs; + int stepped = 1; + struct arch_hw_breakpoint *info; + unsigned int instr; + unsigned long dar = regs->dar; + + /* Disable breakpoints during exception handling */ + set_dabr(0); + + /* + * The counter may be concurrently released but that can only + * occur from a call_rcu() path. We can then safely fetch + * the breakpoint, use its callback, touch its counter + * while we are in an rcu_read_lock() path. + */ + rcu_read_lock(); + + bp = __get_cpu_var(bp_per_reg); + if (!bp) + goto out; + info = counter_arch_bp(bp); + + /* + * Return early after invoking user-callback function without restoring + * DABR if the breakpoint is from ptrace which always operates in + * one-shot mode. The ptrace-ed process will receive the SIGTRAP signal + * generated in do_dabr(). + */ + if (bp->overflow_handler == ptrace_triggered) { + perf_bp_event(bp, regs); + rc = NOTIFY_DONE; + goto out; + } + + /* + * Verify if dar lies within the address range occupied by the symbol + * being watched to filter extraneous exceptions. If it doesn't, + * we still need to single-step the instruction, but we don't + * generate an event. + */ + info->extraneous_interrupt = !((bp->attr.bp_addr <= dar) && + (dar - bp->attr.bp_addr < bp->attr.bp_len)); + + /* Do not emulate user-space instructions, instead single-step them */ + if (user_mode(regs)) { + bp->ctx->task->thread.last_hit_ubp = bp; + regs->msr |= MSR_SE; + goto out; + } + + stepped = 0; + instr = 0; + if (!__get_user_inatomic(instr, (unsigned int *) regs->nip)) + stepped = emulate_step(regs, instr); + + /* + * emulate_step() could not execute it. We've failed in reliably + * handling the hw-breakpoint. Unregister it and throw a warning + * message to let the user know about it. + */ + if (!stepped) { + WARN(1, "Unable to handle hardware breakpoint. Breakpoint at " + "0x%lx will be disabled.", info->address); + perf_event_disable(bp); + goto out; + } + /* + * As a policy, the callback is invoked in a 'trigger-after-execute' + * fashion + */ + if (!info->extraneous_interrupt) + perf_bp_event(bp, regs); + + set_dabr(info->address | info->type | DABR_TRANSLATION); +out: + rcu_read_unlock(); + return rc; +} + +/* + * Handle single-step exceptions following a DABR hit. + */ +int __kprobes single_step_dabr_instruction(struct die_args *args) +{ + struct pt_regs *regs = args->regs; + struct perf_event *bp = NULL; + struct arch_hw_breakpoint *bp_info; + + bp = current->thread.last_hit_ubp; + /* + * Check if we are single-stepping as a result of a + * previous HW Breakpoint exception + */ + if (!bp) + return NOTIFY_DONE; + + bp_info = counter_arch_bp(bp); + + /* + * We shall invoke the user-defined callback function in the single + * stepping handler to confirm to 'trigger-after-execute' semantics + */ + if (!bp_info->extraneous_interrupt) + perf_bp_event(bp, regs); + + set_dabr(bp_info->address | bp_info->type | DABR_TRANSLATION); + current->thread.last_hit_ubp = NULL; + + /* + * If the process was being single-stepped by ptrace, let the + * other single-step actions occur (e.g. generate SIGTRAP). + */ + if (test_thread_flag(TIF_SINGLESTEP)) + return NOTIFY_DONE; + + return NOTIFY_STOP; +} + +/* + * Handle debug exception notifications. + */ +int __kprobes hw_breakpoint_exceptions_notify( + struct notifier_block *unused, unsigned long val, void *data) +{ + int ret = NOTIFY_DONE; + + switch (val) { + case DIE_DABR_MATCH: + ret = hw_breakpoint_handler(data); + break; + case DIE_SSTEP: + ret = single_step_dabr_instruction(data); + break; + } + + return ret; +} + +/* + * Release the user breakpoints used by ptrace + */ +void flush_ptrace_hw_breakpoint(struct task_struct *tsk) +{ + struct thread_struct *t = &tsk->thread; + + unregister_hw_breakpoint(t->ptrace_bps[0]); + t->ptrace_bps[0] = NULL; +} + +void hw_breakpoint_pmu_read(struct perf_event *bp) +{ + /* TODO */ +} diff --git a/arch/powerpc/kernel/idle_book3e.S b/arch/powerpc/kernel/idle_book3e.S new file mode 100644 index 0000000..16c002d --- /dev/null +++ b/arch/powerpc/kernel/idle_book3e.S @@ -0,0 +1,86 @@ +/* + * Copyright 2010 IBM Corp, Benjamin Herrenschmidt <benh@kernel.crashing.org> + * + * Generic idle routine for Book3E processors + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/threads.h> +#include <asm/reg.h> +#include <asm/ppc_asm.h> +#include <asm/asm-offsets.h> +#include <asm/ppc-opcode.h> +#include <asm/processor.h> +#include <asm/thread_info.h> + +/* 64-bit version only for now */ +#ifdef CONFIG_PPC64 + +_GLOBAL(book3e_idle) + /* Save LR for later */ + mflr r0 + std r0,16(r1) + + /* Hard disable interrupts */ + wrteei 0 + + /* Now check if an interrupt came in while we were soft disabled + * since we may otherwise lose it (doorbells etc...). We know + * that since PACAHARDIRQEN will have been cleared in that case. + */ + lbz r3,PACAHARDIRQEN(r13) + cmpwi cr0,r3,0 + beqlr + + /* Now we are going to mark ourselves as soft and hard enables in + * order to be able to take interrupts while asleep. We inform lockdep + * of that. We don't actually turn interrupts on just yet tho. + */ +#ifdef CONFIG_TRACE_IRQFLAGS + stdu r1,-128(r1) + bl .trace_hardirqs_on +#endif + li r0,1 + stb r0,PACASOFTIRQEN(r13) + stb r0,PACAHARDIRQEN(r13) + + /* Interrupts will make use return to LR, so get something we want + * in there + */ + bl 1f + + /* Hard disable interrupts again */ + wrteei 0 + + /* Mark them off again in the PACA as well */ + li r0,0 + stb r0,PACASOFTIRQEN(r13) + stb r0,PACAHARDIRQEN(r13) + + /* Tell lockdep about it */ +#ifdef CONFIG_TRACE_IRQFLAGS + bl .trace_hardirqs_off + addi r1,r1,128 +#endif + ld r0,16(r1) + mtlr r0 + blr + +1: /* Let's set the _TLF_NAPPING flag so interrupts make us return + * to the right spot + */ + clrrdi r11,r1,THREAD_SHIFT + ld r10,TI_LOCAL_FLAGS(r11) + ori r10,r10,_TLF_NAPPING + std r10,TI_LOCAL_FLAGS(r11) + + /* We can now re-enable hard interrupts and go to sleep */ + wrteei 1 +1: PPC_WAIT(0) + b 1b + +#endif /* CONFIG_PPC64 */ diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 77be3d0..8f96d31 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -64,6 +64,8 @@ #include <asm/ptrace.h> #include <asm/machdep.h> #include <asm/udbg.h> +#include <asm/dbell.h> + #ifdef CONFIG_PPC64 #include <asm/paca.h> #include <asm/firmware.h> @@ -153,14 +155,28 @@ notrace void raw_local_irq_restore(unsigned long en) if (get_hard_enabled()) return; +#if defined(CONFIG_BOOKE) && defined(CONFIG_SMP) + /* Check for pending doorbell interrupts and resend to ourself */ + doorbell_check_self(); +#endif + /* * Need to hard-enable interrupts here. Since currently disabled, * no need to take further asm precautions against preemption; but * use local_paca instead of get_paca() to avoid preemption checking. */ local_paca->hard_enabled = en; + +#ifndef CONFIG_BOOKE + /* On server, re-trigger the decrementer if it went negative since + * some processors only trigger on edge transitions of the sign bit. + * + * BookE has a level sensitive decrementer (latches in TSR) so we + * don't need that + */ if ((int)mfspr(SPRN_DEC) < 0) mtspr(SPRN_DEC, 1); +#endif /* CONFIG_BOOKE */ /* * Force the delivery of pending soft-disabled interrupts on PS3. diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c index 89f0051..dd6c141 100644 --- a/arch/powerpc/kernel/machine_kexec.c +++ b/arch/powerpc/kernel/machine_kexec.c @@ -45,6 +45,18 @@ void machine_kexec_cleanup(struct kimage *image) ppc_md.machine_kexec_cleanup(image); } +void arch_crash_save_vmcoreinfo(void) +{ + +#ifdef CONFIG_NEED_MULTIPLE_NODES + VMCOREINFO_SYMBOL(node_data); + VMCOREINFO_LENGTH(node_data, MAX_NUMNODES); +#endif +#ifndef CONFIG_NEED_MULTIPLE_NODES + VMCOREINFO_SYMBOL(contig_page_data); +#endif +} + /* * Do not allocate memory (or fail in any way) in machine_kexec(). * We are past the point of no return, committed to rebooting now. @@ -144,24 +156,24 @@ int overlaps_crashkernel(unsigned long start, unsigned long size) } /* Values we need to export to the second kernel via the device tree. */ -static unsigned long kernel_end; -static unsigned long crashk_size; +static phys_addr_t kernel_end; +static phys_addr_t crashk_size; static struct property kernel_end_prop = { .name = "linux,kernel-end", - .length = sizeof(unsigned long), + .length = sizeof(phys_addr_t), .value = &kernel_end, }; static struct property crashk_base_prop = { .name = "linux,crashkernel-base", - .length = sizeof(unsigned long), + .length = sizeof(phys_addr_t), .value = &crashk_res.start, }; static struct property crashk_size_prop = { .name = "linux,crashkernel-size", - .length = sizeof(unsigned long), + .length = sizeof(phys_addr_t), .value = &crashk_size, }; diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c index ed31a29..583af70 100644 --- a/arch/powerpc/kernel/machine_kexec_64.c +++ b/arch/powerpc/kernel/machine_kexec_64.c @@ -15,6 +15,8 @@ #include <linux/thread_info.h> #include <linux/init_task.h> #include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/cpu.h> #include <asm/page.h> #include <asm/current.h> @@ -25,6 +27,7 @@ #include <asm/sections.h> /* _end */ #include <asm/prom.h> #include <asm/smp.h> +#include <asm/hw_breakpoint.h> int default_machine_kexec_prepare(struct kimage *image) { @@ -165,6 +168,7 @@ static void kexec_smp_down(void *arg) while(kexec_all_irq_disabled == 0) cpu_relax(); mb(); /* make sure all irqs are disabled before this */ + hw_breakpoint_disable(); /* * Now every CPU has IRQs off, we can clear out any pending * IPIs and be sure that no more will come in after this. @@ -180,8 +184,22 @@ static void kexec_prepare_cpus_wait(int wait_state) { int my_cpu, i, notified=-1; + hw_breakpoint_disable(); my_cpu = get_cpu(); - /* Make sure each CPU has atleast made it to the state we need */ + /* Make sure each CPU has at least made it to the state we need. + * + * FIXME: There is a (slim) chance of a problem if not all of the CPUs + * are correctly onlined. If somehow we start a CPU on boot with RTAS + * start-cpu, but somehow that CPU doesn't write callin_cpu_map[] in + * time, the boot CPU will timeout. If it does eventually execute + * stuff, the secondary will start up (paca[].cpu_start was written) and + * get into a peculiar state. If the platform supports + * smp_ops->take_timebase(), the secondary CPU will probably be spinning + * in there. If not (i.e. pseries), the secondary will continue on and + * try to online itself/idle/etc. If it survives that, we need to find + * these possible-but-not-online-but-should-be CPUs and chaperone them + * into kexec_smp_wait(). + */ for_each_online_cpu(i) { if (i == my_cpu) continue; @@ -189,9 +207,9 @@ static void kexec_prepare_cpus_wait(int wait_state) while (paca[i].kexec_state < wait_state) { barrier(); if (i != notified) { - printk( "kexec: waiting for cpu %d (physical" - " %d) to enter %i state\n", - i, paca[i].hw_cpu_id, wait_state); + printk(KERN_INFO "kexec: waiting for cpu %d " + "(physical %d) to enter %i state\n", + i, paca[i].hw_cpu_id, wait_state); notified = i; } } @@ -199,9 +217,32 @@ static void kexec_prepare_cpus_wait(int wait_state) mb(); } -static void kexec_prepare_cpus(void) +/* + * We need to make sure each present CPU is online. The next kernel will scan + * the device tree and assume primary threads are online and query secondary + * threads via RTAS to online them if required. If we don't online primary + * threads, they will be stuck. However, we also online secondary threads as we + * may be using 'cede offline'. In this case RTAS doesn't see the secondary + * threads as offline -- and again, these CPUs will be stuck. + * + * So, we online all CPUs that should be running, including secondary threads. + */ +static void wake_offline_cpus(void) { + int cpu = 0; + for_each_present_cpu(cpu) { + if (!cpu_online(cpu)) { + printk(KERN_INFO "kexec: Waking offline cpu %d.\n", + cpu); + cpu_up(cpu); + } + } +} + +static void kexec_prepare_cpus(void) +{ + wake_offline_cpus(); smp_call_function(kexec_smp_down, NULL, /* wait */0); local_irq_disable(); mb(); /* make sure IRQs are disabled before we say they are */ @@ -215,7 +256,10 @@ static void kexec_prepare_cpus(void) if (ppc_md.kexec_cpu_down) ppc_md.kexec_cpu_down(0, 0); - /* Before removing MMU mapings make sure all CPUs have entered real mode */ + /* + * Before removing MMU mappings make sure all CPUs have entered real + * mode: + */ kexec_prepare_cpus_wait(KEXEC_STATE_REAL_MODE); put_cpu(); @@ -257,6 +301,12 @@ static void kexec_prepare_cpus(void) static union thread_union kexec_stack __init_task_data = { }; +/* + * For similar reasons to the stack above, the kexecing CPU needs to be on a + * static PACA; we switch to kexec_paca. + */ +struct paca_struct kexec_paca; + /* Our assembly helper, in kexec_stub.S */ extern NORET_TYPE void kexec_sequence(void *newstack, unsigned long start, void *image, void *control, @@ -278,12 +328,28 @@ void default_machine_kexec(struct kimage *image) if (crashing_cpu == -1) kexec_prepare_cpus(); + pr_debug("kexec: Starting switchover sequence.\n"); + /* switch to a staticly allocated stack. Based on irq stack code. * XXX: the task struct will likely be invalid once we do the copy! */ kexec_stack.thread_info.task = current_thread_info()->task; kexec_stack.thread_info.flags = 0; + /* We need a static PACA, too; copy this CPU's PACA over and switch to + * it. Also poison per_cpu_offset to catch anyone using non-static + * data. + */ + memcpy(&kexec_paca, get_paca(), sizeof(struct paca_struct)); + kexec_paca.data_offset = 0xedeaddeadeeeeeeeUL; + paca = (struct paca_struct *)RELOC_HIDE(&kexec_paca, 0) - + kexec_paca.paca_index; + setup_paca(&kexec_paca); + + /* XXX: If anyone does 'dynamic lppacas' this will also need to be + * switched to a static version! + */ + /* Some things are best done in assembly. Finding globals with * a toc is easier in C, so pass in what we can. */ diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c index 139a773..d0a26f1 100644 --- a/arch/powerpc/kernel/paca.c +++ b/arch/powerpc/kernel/paca.c @@ -105,6 +105,16 @@ void __init initialise_paca(struct paca_struct *new_paca, int cpu) #endif /* CONFIG_PPC_STD_MMU_64 */ } +/* Put the paca pointer into r13 and SPRG_PACA */ +void setup_paca(struct paca_struct *new_paca) +{ + local_paca = new_paca; + mtspr(SPRN_SPRG_PACA, local_paca); +#ifdef CONFIG_PPC_BOOK3E + mtspr(SPRN_SPRG_TLB_EXFRAME, local_paca->extlb); +#endif +} + static int __initdata paca_size; void __init allocate_pacas(void) diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 773424d..551f671 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -37,6 +37,7 @@ #include <linux/kernel_stat.h> #include <linux/personality.h> #include <linux/random.h> +#include <linux/hw_breakpoint.h> #include <asm/pgtable.h> #include <asm/uaccess.h> @@ -462,14 +463,42 @@ struct task_struct *__switch_to(struct task_struct *prev, #ifdef CONFIG_PPC_ADV_DEBUG_REGS switch_booke_debug_regs(&new->thread); #else +/* + * For PPC_BOOK3S_64, we use the hw-breakpoint interfaces that would + * schedule DABR + */ +#ifndef CONFIG_HAVE_HW_BREAKPOINT if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr)) set_dabr(new->thread.dabr); +#endif /* CONFIG_HAVE_HW_BREAKPOINT */ #endif new_thread = &new->thread; old_thread = ¤t->thread; +#if defined(CONFIG_PPC_BOOK3E_64) + /* XXX Current Book3E code doesn't deal with kernel side DBCR0, + * we always hold the user values, so we set it now. + * + * However, we ensure the kernel MSR:DE is appropriately cleared too + * to avoid spurrious single step exceptions in the kernel. + * + * This will have to change to merge with the ppc32 code at some point, + * but I don't like much what ppc32 is doing today so there's some + * thinking needed there + */ + if ((new_thread->dbcr0 | old_thread->dbcr0) & DBCR0_IDM) { + u32 dbcr0; + + mtmsr(mfmsr() & ~MSR_DE); + isync(); + dbcr0 = mfspr(SPRN_DBCR0); + dbcr0 = (dbcr0 & DBCR0_EDM) | new_thread->dbcr0; + mtspr(SPRN_DBCR0, dbcr0); + } +#endif /* CONFIG_PPC64_BOOK3E */ + #ifdef CONFIG_PPC64 /* * Collect processor utilization data per process @@ -642,7 +671,11 @@ void flush_thread(void) { discard_lazy_cpu_state(); +#ifdef CONFIG_HAVE_HW_BREAKPOINTS + flush_ptrace_hw_breakpoint(current); +#else /* CONFIG_HAVE_HW_BREAKPOINTS */ set_debug_reg_defaults(¤t->thread); +#endif /* CONFIG_HAVE_HW_BREAKPOINTS */ } void @@ -660,6 +693,9 @@ void prepare_to_copy(struct task_struct *tsk) flush_altivec_to_thread(current); flush_vsx_to_thread(current); flush_spe_to_thread(current); +#ifdef CONFIG_HAVE_HW_BREAKPOINT + flush_ptrace_hw_breakpoint(tsk); +#endif /* CONFIG_HAVE_HW_BREAKPOINT */ } /* diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 3b6f8ae..941ff4d 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -311,6 +311,24 @@ static void __init prom_print_hex(unsigned long val) call_prom("write", 3, 1, _prom->stdout, buf, nibbles); } +/* max number of decimal digits in an unsigned long */ +#define UL_DIGITS 21 +static void __init prom_print_dec(unsigned long val) +{ + int i, size; + char buf[UL_DIGITS+1]; + struct prom_t *_prom = &RELOC(prom); + + for (i = UL_DIGITS-1; i >= 0; i--) { + buf[i] = (val % 10) + '0'; + val = val/10; + if (val == 0) + break; + } + /* shift stuff down */ + size = UL_DIGITS - i; + call_prom("write", 3, 1, _prom->stdout, buf+i, size); +} static void __init prom_printf(const char *format, ...) { @@ -350,6 +368,14 @@ static void __init prom_printf(const char *format, ...) v = va_arg(args, unsigned long); prom_print_hex(v); break; + case 'l': + ++q; + if (*q == 'u') { /* '%lu' */ + ++q; + v = va_arg(args, unsigned long); + prom_print_dec(v); + } + break; } } } @@ -835,11 +861,11 @@ static int __init prom_count_smt_threads(void) if (plen == PROM_ERROR) break; plen >>= 2; - prom_debug("Found 0x%x smt threads per core\n", (unsigned long)plen); + prom_debug("Found %lu smt threads per core\n", (unsigned long)plen); /* Sanity check */ if (plen < 1 || plen > 64) { - prom_printf("Threads per core 0x%x out of bounds, assuming 1\n", + prom_printf("Threads per core %lu out of bounds, assuming 1\n", (unsigned long)plen); return 1; } @@ -869,12 +895,12 @@ static void __init prom_send_capabilities(void) cores = (u32 *)PTRRELOC(&ibm_architecture_vec[IBM_ARCH_VEC_NRCORES_OFFSET]); if (*cores != NR_CPUS) { prom_printf("WARNING ! " - "ibm_architecture_vec structure inconsistent: 0x%x !\n", + "ibm_architecture_vec structure inconsistent: %lu!\n", *cores); } else { *cores = DIV_ROUND_UP(NR_CPUS, prom_count_smt_threads()); - prom_printf("Max number of cores passed to firmware: 0x%x\n", - (unsigned long)*cores); + prom_printf("Max number of cores passed to firmware: %lu (NR_CPUS = %lu)\n", + *cores, NR_CPUS); } /* try calling the ibm,client-architecture-support method */ @@ -1482,7 +1508,7 @@ static void __init prom_hold_cpus(void) reg = -1; prom_getprop(node, "reg", ®, sizeof(reg)); - prom_debug("cpu hw idx = 0x%x\n", reg); + prom_debug("cpu hw idx = %lu\n", reg); /* Init the acknowledge var which will be reset by * the secondary cpu when it awakens from its OF @@ -1492,7 +1518,7 @@ static void __init prom_hold_cpus(void) if (reg != _prom->cpu) { /* Primary Thread of non-boot cpu */ - prom_printf("starting cpu hw idx %x... ", reg); + prom_printf("starting cpu hw idx %lu... ", reg); call_prom("start-cpu", 3, 0, node, secondary_hold, reg); @@ -1507,7 +1533,7 @@ static void __init prom_hold_cpus(void) } #ifdef CONFIG_SMP else - prom_printf("boot cpu hw idx %x\n", reg); + prom_printf("boot cpu hw idx %lu\n", reg); #endif /* CONFIG_SMP */ } @@ -2420,7 +2446,7 @@ static void __init prom_find_boot_cpu(void) prom_getprop(cpu_pkg, "reg", &getprop_rval, sizeof(getprop_rval)); _prom->cpu = getprop_rval; - prom_debug("Booting CPU hw index = 0x%x\n", _prom->cpu); + prom_debug("Booting CPU hw index = %lu\n", _prom->cpu); } static void __init prom_check_initrd(unsigned long r3, unsigned long r4) diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index 7a0c0199..11f3cd9 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -32,6 +32,8 @@ #ifdef CONFIG_PPC32 #include <linux/module.h> #endif +#include <linux/hw_breakpoint.h> +#include <linux/perf_event.h> #include <asm/uaccess.h> #include <asm/page.h> @@ -866,9 +868,34 @@ void user_disable_single_step(struct task_struct *task) clear_tsk_thread_flag(task, TIF_SINGLESTEP); } +#ifdef CONFIG_HAVE_HW_BREAKPOINT +void ptrace_triggered(struct perf_event *bp, int nmi, + struct perf_sample_data *data, struct pt_regs *regs) +{ + struct perf_event_attr attr; + + /* + * Disable the breakpoint request here since ptrace has defined a + * one-shot behaviour for breakpoint exceptions in PPC64. + * The SIGTRAP signal is generated automatically for us in do_dabr(). + * We don't have to do anything about that here + */ + attr = bp->attr; + attr.disabled = true; + modify_user_hw_breakpoint(bp, &attr); +} +#endif /* CONFIG_HAVE_HW_BREAKPOINT */ + int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, unsigned long data) { +#ifdef CONFIG_HAVE_HW_BREAKPOINT + int ret; + struct thread_struct *thread = &(task->thread); + struct perf_event *bp; + struct perf_event_attr attr; +#endif /* CONFIG_HAVE_HW_BREAKPOINT */ + /* For ppc64 we support one DABR and no IABR's at the moment (ppc64). * For embedded processors we support one DAC and no IAC's at the * moment. @@ -896,6 +923,43 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, /* Ensure breakpoint translation bit is set */ if (data && !(data & DABR_TRANSLATION)) return -EIO; +#ifdef CONFIG_HAVE_HW_BREAKPOINT + bp = thread->ptrace_bps[0]; + if ((!data) || !(data & (DABR_DATA_WRITE | DABR_DATA_READ))) { + if (bp) { + unregister_hw_breakpoint(bp); + thread->ptrace_bps[0] = NULL; + } + return 0; + } + if (bp) { + attr = bp->attr; + attr.bp_addr = data & ~HW_BREAKPOINT_ALIGN; + arch_bp_generic_fields(data & + (DABR_DATA_WRITE | DABR_DATA_READ), + &attr.bp_type); + ret = modify_user_hw_breakpoint(bp, &attr); + if (ret) + return ret; + thread->ptrace_bps[0] = bp; + thread->dabr = data; + return 0; + } + + /* Create a new breakpoint request if one doesn't exist already */ + hw_breakpoint_init(&attr); + attr.bp_addr = data & ~HW_BREAKPOINT_ALIGN; + arch_bp_generic_fields(data & (DABR_DATA_WRITE | DABR_DATA_READ), + &attr.bp_type); + + thread->ptrace_bps[0] = bp = register_user_hw_breakpoint(&attr, + ptrace_triggered, task); + if (IS_ERR(bp)) { + thread->ptrace_bps[0] = NULL; + return PTR_ERR(bp); + } + +#endif /* CONFIG_HAVE_HW_BREAKPOINT */ /* Move contents to the DABR register */ task->thread.dabr = data; diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index d0516db..41048de 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -47,14 +47,6 @@ struct rtas_t rtas = { }; EXPORT_SYMBOL(rtas); -struct rtas_suspend_me_data { - atomic_t working; /* number of cpus accessing this struct */ - atomic_t done; - int token; /* ibm,suspend-me */ - int error; - struct completion *complete; /* wait on this until working == 0 */ -}; - DEFINE_SPINLOCK(rtas_data_buf_lock); EXPORT_SYMBOL(rtas_data_buf_lock); @@ -714,14 +706,53 @@ void rtas_os_term(char *str) static int ibm_suspend_me_token = RTAS_UNKNOWN_SERVICE; #ifdef CONFIG_PPC_PSERIES -static void rtas_percpu_suspend_me(void *info) +static int __rtas_suspend_last_cpu(struct rtas_suspend_me_data *data, int wake_when_done) +{ + u16 slb_size = mmu_slb_size; + int rc = H_MULTI_THREADS_ACTIVE; + int cpu; + + slb_set_size(SLB_MIN_SIZE); + printk(KERN_DEBUG "calling ibm,suspend-me on cpu %i\n", smp_processor_id()); + + while (rc == H_MULTI_THREADS_ACTIVE && !atomic_read(&data->done) && + !atomic_read(&data->error)) + rc = rtas_call(data->token, 0, 1, NULL); + + if (rc || atomic_read(&data->error)) { + printk(KERN_DEBUG "ibm,suspend-me returned %d\n", rc); + slb_set_size(slb_size); + } + + if (atomic_read(&data->error)) + rc = atomic_read(&data->error); + + atomic_set(&data->error, rc); + + if (wake_when_done) { + atomic_set(&data->done, 1); + + for_each_online_cpu(cpu) + plpar_hcall_norets(H_PROD, get_hard_smp_processor_id(cpu)); + } + + if (atomic_dec_return(&data->working) == 0) + complete(data->complete); + + return rc; +} + +int rtas_suspend_last_cpu(struct rtas_suspend_me_data *data) +{ + atomic_inc(&data->working); + return __rtas_suspend_last_cpu(data, 0); +} + +static int __rtas_suspend_cpu(struct rtas_suspend_me_data *data, int wake_when_done) { long rc = H_SUCCESS; unsigned long msr_save; - u16 slb_size = mmu_slb_size; int cpu; - struct rtas_suspend_me_data *data = - (struct rtas_suspend_me_data *)info; atomic_inc(&data->working); @@ -729,7 +760,7 @@ static void rtas_percpu_suspend_me(void *info) msr_save = mfmsr(); mtmsr(msr_save & ~(MSR_EE)); - while (rc == H_SUCCESS && !atomic_read(&data->done)) + while (rc == H_SUCCESS && !atomic_read(&data->done) && !atomic_read(&data->error)) rc = plpar_hcall_norets(H_JOIN); mtmsr(msr_save); @@ -741,33 +772,37 @@ static void rtas_percpu_suspend_me(void *info) /* All other cpus are in H_JOIN, this cpu does * the suspend. */ - slb_set_size(SLB_MIN_SIZE); - printk(KERN_DEBUG "calling ibm,suspend-me on cpu %i\n", - smp_processor_id()); - data->error = rtas_call(data->token, 0, 1, NULL); - - if (data->error) { - printk(KERN_DEBUG "ibm,suspend-me returned %d\n", - data->error); - slb_set_size(slb_size); - } + return __rtas_suspend_last_cpu(data, wake_when_done); } else { printk(KERN_ERR "H_JOIN on cpu %i failed with rc = %ld\n", smp_processor_id(), rc); - data->error = rc; + atomic_set(&data->error, rc); } - atomic_set(&data->done, 1); + if (wake_when_done) { + atomic_set(&data->done, 1); - /* This cpu did the suspend or got an error; in either case, - * we need to prod all other other cpus out of join state. - * Extra prods are harmless. - */ - for_each_online_cpu(cpu) - plpar_hcall_norets(H_PROD, get_hard_smp_processor_id(cpu)); + /* This cpu did the suspend or got an error; in either case, + * we need to prod all other other cpus out of join state. + * Extra prods are harmless. + */ + for_each_online_cpu(cpu) + plpar_hcall_norets(H_PROD, get_hard_smp_processor_id(cpu)); + } out: if (atomic_dec_return(&data->working) == 0) complete(data->complete); + return rc; +} + +int rtas_suspend_cpu(struct rtas_suspend_me_data *data) +{ + return __rtas_suspend_cpu(data, 0); +} + +static void rtas_percpu_suspend_me(void *info) +{ + __rtas_suspend_cpu((struct rtas_suspend_me_data *)info, 1); } static int rtas_ibm_suspend_me(struct rtas_args *args) @@ -802,22 +837,22 @@ static int rtas_ibm_suspend_me(struct rtas_args *args) atomic_set(&data.working, 0); atomic_set(&data.done, 0); + atomic_set(&data.error, 0); data.token = rtas_token("ibm,suspend-me"); - data.error = 0; data.complete = &done; /* Call function on all CPUs. One of us will make the * rtas call */ if (on_each_cpu(rtas_percpu_suspend_me, &data, 0)) - data.error = -EINVAL; + atomic_set(&data.error, -EINVAL); wait_for_completion(&done); - if (data.error != 0) + if (atomic_read(&data.error) != 0) printk(KERN_ERR "Error doing global join\n"); - return data.error; + return atomic_read(&data.error); } #else /* CONFIG_PPC_PSERIES */ static int rtas_ibm_suspend_me(struct rtas_args *args) diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index b7e6c7e..70decd8 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -94,6 +94,10 @@ struct screen_info screen_info = { .orig_video_points = 16 }; +/* Variables required to store legacy IO irq routing */ +int of_i8042_kbd_irq; +int of_i8042_aux_irq; + #ifdef __DO_IRQ_CANON /* XXX should go elsewhere eventually */ int ppc_do_canonicalize_irqs; @@ -575,6 +579,15 @@ int check_legacy_ioport(unsigned long base_port) np = of_find_compatible_node(NULL, NULL, "pnpPNP,f03"); if (np) { parent = of_get_parent(np); + + of_i8042_kbd_irq = irq_of_parse_and_map(parent, 0); + if (!of_i8042_kbd_irq) + of_i8042_kbd_irq = 1; + + of_i8042_aux_irq = irq_of_parse_and_map(parent, 1); + if (!of_i8042_aux_irq) + of_i8042_aux_irq = 12; + of_node_put(np); np = parent; break; diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index d135f93..1bee4b6 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -142,16 +142,6 @@ early_param("smt-enabled", early_smt_enabled); #define check_smt_enabled() #endif /* CONFIG_SMP */ -/* Put the paca pointer into r13 and SPRG_PACA */ -static void __init setup_paca(struct paca_struct *new_paca) -{ - local_paca = new_paca; - mtspr(SPRN_SPRG_PACA, local_paca); -#ifdef CONFIG_PPC_BOOK3E - mtspr(SPRN_SPRG_TLB_EXFRAME, local_paca->extlb); -#endif -} - /* * Early initialization entry point. This is called by head.S * with MMU translation disabled. We rely on the "feature" of @@ -600,6 +590,9 @@ static int pcpu_cpu_distance(unsigned int from, unsigned int to) return REMOTE_DISTANCE; } +unsigned long __per_cpu_offset[NR_CPUS] __read_mostly; +EXPORT_SYMBOL(__per_cpu_offset); + void __init setup_per_cpu_areas(void) { const size_t dyn_size = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE; @@ -624,8 +617,10 @@ void __init setup_per_cpu_areas(void) panic("cannot initialize percpu area (err=%d)", rc); delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start; - for_each_possible_cpu(cpu) - paca[cpu].data_offset = delta + pcpu_unit_offsets[cpu]; + for_each_possible_cpu(cpu) { + __per_cpu_offset[cpu] = delta + pcpu_unit_offsets[cpu]; + paca[cpu].data_offset = __per_cpu_offset[cpu]; + } } #endif diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c index a0afb55..7109f5b 100644 --- a/arch/powerpc/kernel/signal.c +++ b/arch/powerpc/kernel/signal.c @@ -11,6 +11,7 @@ #include <linux/tracehook.h> #include <linux/signal.h> +#include <asm/hw_breakpoint.h> #include <asm/uaccess.h> #include <asm/unistd.h> @@ -149,6 +150,8 @@ static int do_signal_pending(sigset_t *oldset, struct pt_regs *regs) if (current->thread.dabr) set_dabr(current->thread.dabr); #endif + /* Re-enable the breakpoints for the signal stack */ + thread_change_pc(current, regs); if (is32) { if (ka.sa.sa_flags & SA_SIGINFO) diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 5c196d1..a61b3dd 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -288,8 +288,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus) max_cpus = NR_CPUS; else max_cpus = 1; - - smp_space_timers(max_cpus); for_each_possible_cpu(cpu) if (cpu != boot_cpuid) @@ -501,14 +499,6 @@ int __devinit start_secondary(void *unused) current->active_mm = &init_mm; smp_store_cpu_info(cpu); - -#if defined(CONFIG_BOOKE) || defined(CONFIG_40x) - /* Clear any pending timer interrupts */ - mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS); - - /* Enable decrementer interrupt */ - mtspr(SPRN_TCR, TCR_DIE); -#endif set_dec(tb_ticks_per_jiffy); preempt_disable(); cpu_callin_map[cpu] = 1; diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 0441bbd..ccb8759 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -149,16 +149,6 @@ unsigned long tb_ticks_per_usec = 100; /* sane default */ EXPORT_SYMBOL(tb_ticks_per_usec); unsigned long tb_ticks_per_sec; EXPORT_SYMBOL(tb_ticks_per_sec); /* for cputime_t conversions */ -u64 tb_to_xs; -unsigned tb_to_us; - -#define TICKLEN_SCALE NTP_SCALE_SHIFT -static u64 last_tick_len; /* units are ns / 2^TICKLEN_SCALE */ -static u64 ticklen_to_xs; /* 0.64 fraction */ - -/* If last_tick_len corresponds to about 1/HZ seconds, then - last_tick_len << TICKLEN_SHIFT will be about 2^63. */ -#define TICKLEN_SHIFT (63 - 30 - TICKLEN_SCALE + SHIFT_HZ) DEFINE_SPINLOCK(rtc_lock); EXPORT_SYMBOL_GPL(rtc_lock); @@ -174,7 +164,6 @@ unsigned long ppc_proc_freq; EXPORT_SYMBOL(ppc_proc_freq); unsigned long ppc_tb_freq; -static u64 tb_last_jiffy __cacheline_aligned_in_smp; static DEFINE_PER_CPU(u64, last_jiffy); #ifdef CONFIG_VIRT_CPU_ACCOUNTING @@ -423,30 +412,6 @@ void udelay(unsigned long usecs) } EXPORT_SYMBOL(udelay); -static inline void update_gtod(u64 new_tb_stamp, u64 new_stamp_xsec, - u64 new_tb_to_xs) -{ - /* - * tb_update_count is used to allow the userspace gettimeofday code - * to assure itself that it sees a consistent view of the tb_to_xs and - * stamp_xsec variables. It reads the tb_update_count, then reads - * tb_to_xs and stamp_xsec and then reads tb_update_count again. If - * the two values of tb_update_count match and are even then the - * tb_to_xs and stamp_xsec values are consistent. If not, then it - * loops back and reads them again until this criteria is met. - * We expect the caller to have done the first increment of - * vdso_data->tb_update_count already. - */ - vdso_data->tb_orig_stamp = new_tb_stamp; - vdso_data->stamp_xsec = new_stamp_xsec; - vdso_data->tb_to_xs = new_tb_to_xs; - vdso_data->wtom_clock_sec = wall_to_monotonic.tv_sec; - vdso_data->wtom_clock_nsec = wall_to_monotonic.tv_nsec; - vdso_data->stamp_xtime = xtime; - smp_wmb(); - ++(vdso_data->tb_update_count); -} - #ifdef CONFIG_SMP unsigned long profile_pc(struct pt_regs *regs) { @@ -470,7 +435,6 @@ EXPORT_SYMBOL(profile_pc); static int __init iSeries_tb_recal(void) { - struct div_result divres; unsigned long titan, tb; /* Make sure we only run on iSeries */ @@ -501,10 +465,7 @@ static int __init iSeries_tb_recal(void) tb_ticks_per_jiffy = new_tb_ticks_per_jiffy; tb_ticks_per_sec = new_tb_ticks_per_sec; calc_cputime_factors(); - div128_by_32( XSEC_PER_SEC, 0, tb_ticks_per_sec, &divres ); - tb_to_xs = divres.result_low; vdso_data->tb_ticks_per_sec = tb_ticks_per_sec; - vdso_data->tb_to_xs = tb_to_xs; setup_cputime_one_jiffy(); } else { @@ -667,27 +628,9 @@ void timer_interrupt(struct pt_regs * regs) trace_timer_interrupt_exit(regs); } -void wakeup_decrementer(void) -{ - unsigned long ticks; - - /* - * The timebase gets saved on sleep and restored on wakeup, - * so all we need to do is to reset the decrementer. - */ - ticks = tb_ticks_since(__get_cpu_var(last_jiffy)); - if (ticks < tb_ticks_per_jiffy) - ticks = tb_ticks_per_jiffy - ticks; - else - ticks = 1; - set_dec(ticks); -} - #ifdef CONFIG_SUSPEND -void generic_suspend_disable_irqs(void) +static void generic_suspend_disable_irqs(void) { - preempt_disable(); - /* Disable the decrementer, so that it doesn't interfere * with suspending. */ @@ -697,12 +640,9 @@ void generic_suspend_disable_irqs(void) set_dec(0x7fffffff); } -void generic_suspend_enable_irqs(void) +static void generic_suspend_enable_irqs(void) { - wakeup_decrementer(); - local_irq_enable(); - preempt_enable(); } /* Overrides the weak version in kernel/power/main.c */ @@ -722,23 +662,6 @@ void arch_suspend_enable_irqs(void) } #endif -#ifdef CONFIG_SMP -void __init smp_space_timers(unsigned int max_cpus) -{ - int i; - u64 previous_tb = per_cpu(last_jiffy, boot_cpuid); - - /* make sure tb > per_cpu(last_jiffy, cpu) for all cpus always */ - previous_tb -= tb_ticks_per_jiffy; - - for_each_possible_cpu(i) { - if (i == boot_cpuid) - continue; - per_cpu(last_jiffy, i) = previous_tb; - } -} -#endif - /* * Scheduler clock - returns current time in nanosec units. * @@ -873,10 +796,37 @@ static cycle_t timebase_read(struct clocksource *cs) return (cycle_t)get_tb(); } +static inline void update_gtod(u64 new_tb_stamp, u64 new_stamp_xsec, + u64 new_tb_to_xs, struct timespec *now, + u32 frac_sec) +{ + /* + * tb_update_count is used to allow the userspace gettimeofday code + * to assure itself that it sees a consistent view of the tb_to_xs and + * stamp_xsec variables. It reads the tb_update_count, then reads + * tb_to_xs and stamp_xsec and then reads tb_update_count again. If + * the two values of tb_update_count match and are even then the + * tb_to_xs and stamp_xsec values are consistent. If not, then it + * loops back and reads them again until this criteria is met. + * We expect the caller to have done the first increment of + * vdso_data->tb_update_count already. + */ + vdso_data->tb_orig_stamp = new_tb_stamp; + vdso_data->stamp_xsec = new_stamp_xsec; + vdso_data->tb_to_xs = new_tb_to_xs; + vdso_data->wtom_clock_sec = wall_to_monotonic.tv_sec; + vdso_data->wtom_clock_nsec = wall_to_monotonic.tv_nsec; + vdso_data->stamp_xtime = *now; + vdso_data->stamp_sec_fraction = frac_sec; + smp_wmb(); + ++(vdso_data->tb_update_count); +} + void update_vsyscall(struct timespec *wall_time, struct clocksource *clock, u32 mult) { u64 t2x, stamp_xsec; + u32 frac_sec; if (clock != &clocksource_timebase) return; @@ -888,10 +838,14 @@ void update_vsyscall(struct timespec *wall_time, struct clocksource *clock, /* XXX this assumes clock->shift == 22 */ /* 4611686018 ~= 2^(20+64-22) / 1e9 */ t2x = (u64) mult * 4611686018ULL; - stamp_xsec = (u64) xtime.tv_nsec * XSEC_PER_SEC; + stamp_xsec = (u64) wall_time->tv_nsec * XSEC_PER_SEC; do_div(stamp_xsec, 1000000000); - stamp_xsec += (u64) xtime.tv_sec * XSEC_PER_SEC; - update_gtod(clock->cycle_last, stamp_xsec, t2x); + stamp_xsec += (u64) wall_time->tv_sec * XSEC_PER_SEC; + + BUG_ON(wall_time->tv_nsec >= NSEC_PER_SEC); + /* this is tv_nsec / 1e9 as a 0.32 fraction */ + frac_sec = ((u64) wall_time->tv_nsec * 18446744073ULL) >> 32; + update_gtod(clock->cycle_last, stamp_xsec, t2x, wall_time, frac_sec); } void update_vsyscall_tz(void) @@ -1007,15 +961,13 @@ void secondary_cpu_time_init(void) /* This function is only called on the boot processor */ void __init time_init(void) { - unsigned long flags; struct div_result res; - u64 scale, x; + u64 scale; unsigned shift; if (__USE_RTC()) { /* 601 processor: dec counts down by 128 every 128ns */ ppc_tb_freq = 1000000000; - tb_last_jiffy = get_rtcl(); } else { /* Normal PowerPC with timebase register */ ppc_md.calibrate_decr(); @@ -1023,50 +975,15 @@ void __init time_init(void) ppc_tb_freq / 1000000, ppc_tb_freq % 1000000); printk(KERN_DEBUG "time_init: processor frequency = %lu.%.6lu MHz\n", ppc_proc_freq / 1000000, ppc_proc_freq % 1000000); - tb_last_jiffy = get_tb(); } tb_ticks_per_jiffy = ppc_tb_freq / HZ; tb_ticks_per_sec = ppc_tb_freq; tb_ticks_per_usec = ppc_tb_freq / 1000000; - tb_to_us = mulhwu_scale_factor(ppc_tb_freq, 1000000); calc_cputime_factors(); setup_cputime_one_jiffy(); /* - * Calculate the length of each tick in ns. It will not be - * exactly 1e9/HZ unless ppc_tb_freq is divisible by HZ. - * We compute 1e9 * tb_ticks_per_jiffy / ppc_tb_freq, - * rounded up. - */ - x = (u64) NSEC_PER_SEC * tb_ticks_per_jiffy + ppc_tb_freq - 1; - do_div(x, ppc_tb_freq); - tick_nsec = x; - last_tick_len = x << TICKLEN_SCALE; - - /* - * Compute ticklen_to_xs, which is a factor which gets multiplied - * by (last_tick_len << TICKLEN_SHIFT) to get a tb_to_xs value. - * It is computed as: - * ticklen_to_xs = 2^N / (tb_ticks_per_jiffy * 1e9) - * where N = 64 + 20 - TICKLEN_SCALE - TICKLEN_SHIFT - * which turns out to be N = 51 - SHIFT_HZ. - * This gives the result as a 0.64 fixed-point fraction. - * That value is reduced by an offset amounting to 1 xsec per - * 2^31 timebase ticks to avoid problems with time going backwards - * by 1 xsec when we do timer_recalc_offset due to losing the - * fractional xsec. That offset is equal to ppc_tb_freq/2^51 - * since there are 2^20 xsec in a second. - */ - div128_by_32((1ULL << 51) - ppc_tb_freq, 0, - tb_ticks_per_jiffy << SHIFT_HZ, &res); - div128_by_32(res.result_high, res.result_low, NSEC_PER_SEC, &res); - ticklen_to_xs = res.result_low; - - /* Compute tb_to_xs from tick_nsec */ - tb_to_xs = mulhdu(last_tick_len << TICKLEN_SHIFT, ticklen_to_xs); - - /* * Compute scale factor for sched_clock. * The calibrate_decr() function has set tb_ticks_per_sec, * which is the timebase frequency. @@ -1087,21 +1004,14 @@ void __init time_init(void) /* Save the current timebase to pretty up CONFIG_PRINTK_TIME */ boot_tb = get_tb_or_rtc(); - write_seqlock_irqsave(&xtime_lock, flags); - /* If platform provided a timezone (pmac), we correct the time */ if (timezone_offset) { sys_tz.tz_minuteswest = -timezone_offset / 60; sys_tz.tz_dsttime = 0; } - vdso_data->tb_orig_stamp = tb_last_jiffy; vdso_data->tb_update_count = 0; vdso_data->tb_ticks_per_sec = tb_ticks_per_sec; - vdso_data->stamp_xsec = (u64) xtime.tv_sec * XSEC_PER_SEC; - vdso_data->tb_to_xs = tb_to_xs; - - write_sequnlock_irqrestore(&xtime_lock, flags); /* Start the decrementer on CPUs that have manual control * such as BookE @@ -1195,39 +1105,6 @@ void to_tm(int tim, struct rtc_time * tm) GregorianDay(tm); } -/* Auxiliary function to compute scaling factors */ -/* Actually the choice of a timebase running at 1/4 the of the bus - * frequency giving resolution of a few tens of nanoseconds is quite nice. - * It makes this computation very precise (27-28 bits typically) which - * is optimistic considering the stability of most processor clock - * oscillators and the precision with which the timebase frequency - * is measured but does not harm. - */ -unsigned mulhwu_scale_factor(unsigned inscale, unsigned outscale) -{ - unsigned mlt=0, tmp, err; - /* No concern for performance, it's done once: use a stupid - * but safe and compact method to find the multiplier. - */ - - for (tmp = 1U<<31; tmp != 0; tmp >>= 1) { - if (mulhwu(inscale, mlt|tmp) < outscale) - mlt |= tmp; - } - - /* We might still be off by 1 for the best approximation. - * A side effect of this is that if outscale is too large - * the returned value will be zero. - * Many corner cases have been checked and seem to work, - * some might have been forgotten in the test however. - */ - - err = inscale * (mlt+1); - if (err <= inscale/2) - mlt++; - return mlt; -} - /* * Divide a 128-bit dividend by a 32-bit divisor, leaving a 128 bit * result. diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 25fc339..a45a63c 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -55,9 +55,6 @@ #endif #include <asm/kexec.h> #include <asm/ppc-opcode.h> -#ifdef CONFIG_FSL_BOOKE -#include <asm/dbell.h> -#endif #if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC) int (*__debugger)(struct pt_regs *regs) __read_mostly; @@ -688,7 +685,7 @@ void RunModeException(struct pt_regs *regs) void __kprobes single_step_exception(struct pt_regs *regs) { - regs->msr &= ~(MSR_SE | MSR_BE); /* Turn off 'trace' bits */ + clear_single_step(regs); if (notify_die(DIE_SSTEP, "single_step", regs, 5, 5, SIGTRAP) == NOTIFY_STOP) @@ -707,10 +704,8 @@ void __kprobes single_step_exception(struct pt_regs *regs) */ static void emulate_single_step(struct pt_regs *regs) { - if (single_stepping(regs)) { - clear_single_step(regs); - _exception(SIGTRAP, regs, TRAP_TRACE, 0); - } + if (single_stepping(regs)) + single_step_exception(regs); } static inline int __parse_fpscr(unsigned long fpscr) @@ -1344,24 +1339,6 @@ void vsx_assist_exception(struct pt_regs *regs) #endif /* CONFIG_VSX */ #ifdef CONFIG_FSL_BOOKE - -void doorbell_exception(struct pt_regs *regs) -{ -#ifdef CONFIG_SMP - int cpu = smp_processor_id(); - int msg; - - if (num_online_cpus() < 2) - return; - - for (msg = 0; msg < 4; msg++) - if (test_and_clear_bit(msg, &dbell_smp_message[cpu])) - smp_message_recv(msg); -#else - printk(KERN_WARNING "Received doorbell on non-smp system\n"); -#endif -} - void CacheLockingException(struct pt_regs *regs, unsigned long address, unsigned long error_code) { diff --git a/arch/powerpc/kernel/vdso32/gettimeofday.S b/arch/powerpc/kernel/vdso32/gettimeofday.S index ee038d4..4ee09ee 100644 --- a/arch/powerpc/kernel/vdso32/gettimeofday.S +++ b/arch/powerpc/kernel/vdso32/gettimeofday.S @@ -19,8 +19,10 @@ /* Offset for the low 32-bit part of a field of long type */ #ifdef CONFIG_PPC64 #define LOPART 4 +#define TSPEC_TV_SEC TSPC64_TV_SEC+LOPART #else #define LOPART 0 +#define TSPEC_TV_SEC TSPC32_TV_SEC #endif .text @@ -41,23 +43,11 @@ V_FUNCTION_BEGIN(__kernel_gettimeofday) mr r9, r3 /* datapage ptr in r9 */ cmplwi r10,0 /* check if tv is NULL */ beq 3f - bl __do_get_xsec@local /* get xsec from tb & kernel */ - bne- 2f /* out of line -> do syscall */ - - /* seconds are xsec >> 20 */ - rlwinm r5,r4,12,20,31 - rlwimi r5,r3,12,0,19 - stw r5,TVAL32_TV_SEC(r10) - - /* get remaining xsec and convert to usec. we scale - * up remaining xsec by 12 bits and get the top 32 bits - * of the multiplication - */ - rlwinm r5,r4,12,0,19 - lis r6,1000000@h - ori r6,r6,1000000@l - mulhwu r5,r5,r6 - stw r5,TVAL32_TV_USEC(r10) + lis r7,1000000@ha /* load up USEC_PER_SEC */ + addi r7,r7,1000000@l /* so we get microseconds in r4 */ + bl __do_get_tspec@local /* get sec/usec from tb & kernel */ + stw r3,TVAL32_TV_SEC(r10) + stw r4,TVAL32_TV_USEC(r10) 3: cmplwi r11,0 /* check if tz is NULL */ beq 1f @@ -70,14 +60,6 @@ V_FUNCTION_BEGIN(__kernel_gettimeofday) crclr cr0*4+so li r3,0 blr - -2: - mtlr r12 - mr r3,r10 - mr r4,r11 - li r0,__NR_gettimeofday - sc - blr .cfi_endproc V_FUNCTION_END(__kernel_gettimeofday) @@ -100,7 +82,8 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime) mr r11,r4 /* r11 saves tp */ bl __get_datapage@local /* get data page */ mr r9,r3 /* datapage ptr in r9 */ - + lis r7,NSEC_PER_SEC@h /* want nanoseconds */ + ori r7,r7,NSEC_PER_SEC@l 50: bl __do_get_tspec@local /* get sec/nsec from tb & kernel */ bne cr1,80f /* not monotonic -> all done */ @@ -198,83 +181,12 @@ V_FUNCTION_END(__kernel_clock_getres) /* - * This is the core of gettimeofday() & friends, it returns the xsec - * value in r3 & r4 and expects the datapage ptr (non clobbered) - * in r9. clobbers r0,r4,r5,r6,r7,r8. - * When returning, r8 contains the counter value that can be reused - * by the monotonic clock implementation - */ -__do_get_xsec: - .cfi_startproc - /* Check for update count & load values. We use the low - * order 32 bits of the update count - */ -1: lwz r8,(CFG_TB_UPDATE_COUNT+LOPART)(r9) - andi. r0,r8,1 /* pending update ? loop */ - bne- 1b - xor r0,r8,r8 /* create dependency */ - add r9,r9,r0 - - /* Load orig stamp (offset to TB) */ - lwz r5,CFG_TB_ORIG_STAMP(r9) - lwz r6,(CFG_TB_ORIG_STAMP+4)(r9) - - /* Get a stable TB value */ -2: mftbu r3 - mftbl r4 - mftbu r0 - cmpl cr0,r3,r0 - bne- 2b - - /* Substract tb orig stamp. If the high part is non-zero, we jump to - * the slow path which call the syscall. - * If it's ok, then we have our 32 bits tb_ticks value in r7 - */ - subfc r7,r6,r4 - subfe. r0,r5,r3 - bne- 3f - - /* Load scale factor & do multiplication */ - lwz r5,CFG_TB_TO_XS(r9) /* load values */ - lwz r6,(CFG_TB_TO_XS+4)(r9) - mulhwu r4,r7,r5 - mulhwu r6,r7,r6 - mullw r0,r7,r5 - addc r6,r6,r0 - - /* At this point, we have the scaled xsec value in r4 + XER:CA - * we load & add the stamp since epoch - */ - lwz r5,CFG_STAMP_XSEC(r9) - lwz r6,(CFG_STAMP_XSEC+4)(r9) - adde r4,r4,r6 - addze r3,r5 - - /* We now have our result in r3,r4. We create a fake dependency - * on that result and re-check the counter - */ - or r6,r4,r3 - xor r0,r6,r6 - add r9,r9,r0 - lwz r0,(CFG_TB_UPDATE_COUNT+LOPART)(r9) - cmpl cr0,r8,r0 /* check if updated */ - bne- 1b - - /* Warning ! The caller expects CR:EQ to be set to indicate a - * successful calculation (so it won't fallback to the syscall - * method). We have overriden that CR bit in the counter check, - * but fortunately, the loop exit condition _is_ CR:EQ set, so - * we can exit safely here. If you change this code, be careful - * of that side effect. - */ -3: blr - .cfi_endproc - -/* - * This is the core of clock_gettime(), it returns the current - * time in seconds and nanoseconds in r3 and r4. + * This is the core of clock_gettime() and gettimeofday(), + * it returns the current time in r3 (seconds) and r4. + * On entry, r7 gives the resolution of r4, either USEC_PER_SEC + * or NSEC_PER_SEC, giving r4 in microseconds or nanoseconds. * It expects the datapage ptr in r9 and doesn't clobber it. - * It clobbers r0, r5, r6, r10 and returns NSEC_PER_SEC in r7. + * It clobbers r0, r5 and r6. * On return, r8 contains the counter value that can be reused. * This clobbers cr0 but not any other cr field. */ @@ -297,70 +209,58 @@ __do_get_tspec: 2: mftbu r3 mftbl r4 mftbu r0 - cmpl cr0,r3,r0 + cmplw cr0,r3,r0 bne- 2b /* Subtract tb orig stamp and shift left 12 bits. */ - subfc r7,r6,r4 + subfc r4,r6,r4 subfe r0,r5,r3 slwi r0,r0,12 - rlwimi. r0,r7,12,20,31 - slwi r7,r7,12 + rlwimi. r0,r4,12,20,31 + slwi r4,r4,12 - /* Load scale factor & do multiplication */ + /* + * Load scale factor & do multiplication. + * We only use the high 32 bits of the tb_to_xs value. + * Even with a 1GHz timebase clock, the high 32 bits of + * tb_to_xs will be at least 4 million, so the error from + * ignoring the low 32 bits will be no more than 0.25ppm. + * The error will just make the clock run very very slightly + * slow until the next time the kernel updates the VDSO data, + * at which point the clock will catch up to the kernel's value, + * so there is no long-term error accumulation. + */ lwz r5,CFG_TB_TO_XS(r9) /* load values */ - lwz r6,(CFG_TB_TO_XS+4)(r9) - mulhwu r3,r7,r6 - mullw r10,r7,r5 - mulhwu r4,r7,r5 - addc r10,r3,r10 + mulhwu r4,r4,r5 li r3,0 beq+ 4f /* skip high part computation if 0 */ mulhwu r3,r0,r5 - mullw r7,r0,r5 - mulhwu r5,r0,r6 - mullw r6,r0,r6 - adde r4,r4,r7 - addze r3,r3 + mullw r5,r0,r5 addc r4,r4,r5 addze r3,r3 - addc r10,r10,r6 - -4: addze r4,r4 /* add in carry */ - lis r7,NSEC_PER_SEC@h - ori r7,r7,NSEC_PER_SEC@l - mulhwu r4,r4,r7 /* convert to nanoseconds */ - - /* At this point, we have seconds & nanoseconds since the xtime - * stamp in r3+CA and r4. Load & add the xtime stamp. +4: + /* At this point, we have seconds since the xtime stamp + * as a 32.32 fixed-point number in r3 and r4. + * Load & add the xtime stamp. */ -#ifdef CONFIG_PPC64 - lwz r5,STAMP_XTIME+TSPC64_TV_SEC+LOPART(r9) - lwz r6,STAMP_XTIME+TSPC64_TV_NSEC+LOPART(r9) -#else - lwz r5,STAMP_XTIME+TSPC32_TV_SEC(r9) - lwz r6,STAMP_XTIME+TSPC32_TV_NSEC(r9) -#endif - add r4,r4,r6 + lwz r5,STAMP_XTIME+TSPEC_TV_SEC(r9) + lwz r6,STAMP_SEC_FRAC(r9) + addc r4,r4,r6 adde r3,r3,r5 - /* We now have our result in r3,r4. We create a fake dependency - * on that result and re-check the counter + /* We create a fake dependency on the result in r3/r4 + * and re-check the counter */ or r6,r4,r3 xor r0,r6,r6 add r9,r9,r0 lwz r0,(CFG_TB_UPDATE_COUNT+LOPART)(r9) - cmpl cr0,r8,r0 /* check if updated */ + cmplw cr0,r8,r0 /* check if updated */ bne- 1b - /* check for nanosecond overflow and adjust if necessary */ - cmpw r4,r7 - bltlr /* all done if no overflow */ - subf r4,r7,r4 /* adjust if overflow */ - addi r3,r3,1 + mulhwu r4,r4,r7 /* convert to micro or nanoseconds */ blr .cfi_endproc diff --git a/arch/powerpc/kernel/vdso64/gettimeofday.S b/arch/powerpc/kernel/vdso64/gettimeofday.S index 262cd58..e97a9a0 100644 --- a/arch/powerpc/kernel/vdso64/gettimeofday.S +++ b/arch/powerpc/kernel/vdso64/gettimeofday.S @@ -33,18 +33,11 @@ V_FUNCTION_BEGIN(__kernel_gettimeofday) bl V_LOCAL_FUNC(__get_datapage) /* get data page */ cmpldi r11,0 /* check if tv is NULL */ beq 2f - bl V_LOCAL_FUNC(__do_get_xsec) /* get xsec from tb & kernel */ - lis r7,15 /* r7 = 1000000 = USEC_PER_SEC */ - ori r7,r7,16960 - rldicl r5,r4,44,20 /* r5 = sec = xsec / XSEC_PER_SEC */ - rldicr r6,r5,20,43 /* r6 = sec * XSEC_PER_SEC */ - std r5,TVAL64_TV_SEC(r11) /* store sec in tv */ - subf r0,r6,r4 /* r0 = xsec = (xsec - r6) */ - mulld r0,r0,r7 /* usec = (xsec * USEC_PER_SEC) / - * XSEC_PER_SEC - */ - rldicl r0,r0,44,20 - std r0,TVAL64_TV_USEC(r11) /* store usec in tv */ + lis r7,1000000@ha /* load up USEC_PER_SEC */ + addi r7,r7,1000000@l + bl V_LOCAL_FUNC(__do_get_tspec) /* get sec/us from tb & kernel */ + std r4,TVAL64_TV_SEC(r11) /* store sec in tv */ + std r5,TVAL64_TV_USEC(r11) /* store usec in tv */ 2: cmpldi r10,0 /* check if tz is NULL */ beq 1f lwz r4,CFG_TZ_MINUTEWEST(r3)/* fill tz */ @@ -77,6 +70,8 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime) .cfi_register lr,r12 mr r11,r4 /* r11 saves tp */ bl V_LOCAL_FUNC(__get_datapage) /* get data page */ + lis r7,NSEC_PER_SEC@h /* want nanoseconds */ + ori r7,r7,NSEC_PER_SEC@l 50: bl V_LOCAL_FUNC(__do_get_tspec) /* get time from tb & kernel */ bne cr1,80f /* if not monotonic, all done */ @@ -171,49 +166,12 @@ V_FUNCTION_END(__kernel_clock_getres) /* - * This is the core of gettimeofday(), it returns the xsec - * value in r4 and expects the datapage ptr (non clobbered) - * in r3. clobbers r0,r4,r5,r6,r7,r8 - * When returning, r8 contains the counter value that can be reused - */ -V_FUNCTION_BEGIN(__do_get_xsec) - .cfi_startproc - /* check for update count & load values */ -1: ld r8,CFG_TB_UPDATE_COUNT(r3) - andi. r0,r8,1 /* pending update ? loop */ - bne- 1b - xor r0,r8,r8 /* create dependency */ - add r3,r3,r0 - - /* Get TB & offset it. We use the MFTB macro which will generate - * workaround code for Cell. - */ - MFTB(r7) - ld r9,CFG_TB_ORIG_STAMP(r3) - subf r7,r9,r7 - - /* Scale result */ - ld r5,CFG_TB_TO_XS(r3) - mulhdu r7,r7,r5 - - /* Add stamp since epoch */ - ld r6,CFG_STAMP_XSEC(r3) - add r4,r6,r7 - - xor r0,r4,r4 - add r3,r3,r0 - ld r0,CFG_TB_UPDATE_COUNT(r3) - cmpld cr0,r0,r8 /* check if updated */ - bne- 1b - blr - .cfi_endproc -V_FUNCTION_END(__do_get_xsec) - -/* - * This is the core of clock_gettime(), it returns the current - * time in seconds and nanoseconds in r4 and r5. + * This is the core of clock_gettime() and gettimeofday(), + * it returns the current time in r4 (seconds) and r5. + * On entry, r7 gives the resolution of r5, either USEC_PER_SEC + * or NSEC_PER_SEC, giving r5 in microseconds or nanoseconds. * It expects the datapage ptr in r3 and doesn't clobber it. - * It clobbers r0 and r6 and returns NSEC_PER_SEC in r7. + * It clobbers r0, r6 and r9. * On return, r8 contains the counter value that can be reused. * This clobbers cr0 but not any other cr field. */ @@ -229,18 +187,18 @@ V_FUNCTION_BEGIN(__do_get_tspec) /* Get TB & offset it. We use the MFTB macro which will generate * workaround code for Cell. */ - MFTB(r7) + MFTB(r6) ld r9,CFG_TB_ORIG_STAMP(r3) - subf r7,r9,r7 + subf r6,r9,r6 /* Scale result */ ld r5,CFG_TB_TO_XS(r3) - sldi r7,r7,12 /* compute time since stamp_xtime */ - mulhdu r6,r7,r5 /* in units of 2^-32 seconds */ + sldi r6,r6,12 /* compute time since stamp_xtime */ + mulhdu r6,r6,r5 /* in units of 2^-32 seconds */ /* Add stamp since epoch */ ld r4,STAMP_XTIME+TSPC64_TV_SEC(r3) - ld r5,STAMP_XTIME+TSPC64_TV_NSEC(r3) + lwz r5,STAMP_SEC_FRAC(r3) or r0,r4,r5 or r0,r0,r6 xor r0,r0,r0 @@ -250,17 +208,11 @@ V_FUNCTION_BEGIN(__do_get_tspec) bne- 1b /* reload if so */ /* convert to seconds & nanoseconds and add to stamp */ - lis r7,NSEC_PER_SEC@h - ori r7,r7,NSEC_PER_SEC@l - mulhwu r0,r6,r7 /* compute nanoseconds and */ + add r6,r6,r5 /* add on fractional seconds of xtime */ + mulhwu r5,r6,r7 /* compute micro or nanoseconds and */ srdi r6,r6,32 /* seconds since stamp_xtime */ - clrldi r0,r0,32 - add r5,r5,r0 /* add nanoseconds together */ - cmpd r5,r7 /* overflow? */ + clrldi r5,r5,32 add r4,r4,r6 - bltlr /* all done if no overflow */ - subf r5,r7,r5 /* if overflow, adjust */ - addi r4,r4,1 blr .cfi_endproc V_FUNCTION_END(__do_get_tspec) diff --git a/arch/powerpc/kvm/timing.c b/arch/powerpc/kvm/timing.c index 7037855..46fa04f 100644 --- a/arch/powerpc/kvm/timing.c +++ b/arch/powerpc/kvm/timing.c @@ -182,7 +182,7 @@ static ssize_t kvmppc_exit_timing_write(struct file *file, } if (c == 'c') { - struct seq_file *seqf = (struct seq_file *)file->private_data; + struct seq_file *seqf = file->private_data; struct kvm_vcpu *vcpu = seqf->private; /* Write does not affect our buffers previously generated with * show. seq_file is locked here to prevent races of init with diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index 111da1c..5bb89c8 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -18,8 +18,9 @@ obj-$(CONFIG_HAS_IOMEM) += devres.o obj-$(CONFIG_PPC64) += copypage_64.o copyuser_64.o \ memcpy_64.o usercopy_64.o mem_64.o string.o -obj-$(CONFIG_XMON) += sstep.o -obj-$(CONFIG_KPROBES) += sstep.o +obj-$(CONFIG_XMON) += sstep.o ldstfp.o +obj-$(CONFIG_KPROBES) += sstep.o ldstfp.o +obj-$(CONFIG_HAVE_HW_BREAKPOINT) += sstep.o ldstfp.o ifeq ($(CONFIG_PPC64),y) obj-$(CONFIG_SMP) += locks.o diff --git a/arch/powerpc/lib/ldstfp.S b/arch/powerpc/lib/ldstfp.S new file mode 100644 index 0000000..f644863 --- /dev/null +++ b/arch/powerpc/lib/ldstfp.S @@ -0,0 +1,375 @@ +/* + * Floating-point, VMX/Altivec and VSX loads and stores + * for use in instruction emulation. + * + * Copyright 2010 Paul Mackerras, IBM Corp. <paulus@au1.ibm.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <asm/processor.h> +#include <asm/ppc_asm.h> +#include <asm/ppc-opcode.h> +#include <asm/reg.h> +#include <asm/asm-offsets.h> +#include <linux/errno.h> + +#define STKFRM (PPC_MIN_STKFRM + 16) + + .macro extab instr,handler + .section __ex_table,"a" + PPC_LONG \instr,\handler + .previous + .endm + + .macro inst32 op +reg = 0 + .rept 32 +20: \op reg,0,r4 + b 3f + extab 20b,99f +reg = reg + 1 + .endr + .endm + +/* Get the contents of frN into fr0; N is in r3. */ +_GLOBAL(get_fpr) + mflr r0 + rlwinm r3,r3,3,0xf8 + bcl 20,31,1f + blr /* fr0 is already in fr0 */ + nop +reg = 1 + .rept 31 + fmr fr0,reg + blr +reg = reg + 1 + .endr +1: mflr r5 + add r5,r3,r5 + mtctr r5 + mtlr r0 + bctr + +/* Put the contents of fr0 into frN; N is in r3. */ +_GLOBAL(put_fpr) + mflr r0 + rlwinm r3,r3,3,0xf8 + bcl 20,31,1f + blr /* fr0 is already in fr0 */ + nop +reg = 1 + .rept 31 + fmr reg,fr0 + blr +reg = reg + 1 + .endr +1: mflr r5 + add r5,r3,r5 + mtctr r5 + mtlr r0 + bctr + +/* Load FP reg N from float at *p. N is in r3, p in r4. */ +_GLOBAL(do_lfs) + PPC_STLU r1,-STKFRM(r1) + mflr r0 + PPC_STL r0,STKFRM+PPC_LR_STKOFF(r1) + mfmsr r6 + ori r7,r6,MSR_FP + cmpwi cr7,r3,0 + mtmsrd r7 + isync + beq cr7,1f + stfd fr0,STKFRM-16(r1) +1: li r9,-EFAULT +2: lfs fr0,0(r4) + li r9,0 +3: bl put_fpr + beq cr7,4f + lfd fr0,STKFRM-16(r1) +4: PPC_LL r0,STKFRM+PPC_LR_STKOFF(r1) + mtlr r0 + mtmsrd r6 + isync + mr r3,r9 + addi r1,r1,STKFRM + blr + extab 2b,3b + +/* Load FP reg N from double at *p. N is in r3, p in r4. */ +_GLOBAL(do_lfd) + PPC_STLU r1,-STKFRM(r1) + mflr r0 + PPC_STL r0,STKFRM+PPC_LR_STKOFF(r1) + mfmsr r6 + ori r7,r6,MSR_FP + cmpwi cr7,r3,0 + mtmsrd r7 + isync + beq cr7,1f + stfd fr0,STKFRM-16(r1) +1: li r9,-EFAULT +2: lfd fr0,0(r4) + li r9,0 +3: beq cr7,4f + bl put_fpr + lfd fr0,STKFRM-16(r1) +4: PPC_LL r0,STKFRM+PPC_LR_STKOFF(r1) + mtlr r0 + mtmsrd r6 + isync + mr r3,r9 + addi r1,r1,STKFRM + blr + extab 2b,3b + +/* Store FP reg N to float at *p. N is in r3, p in r4. */ +_GLOBAL(do_stfs) + PPC_STLU r1,-STKFRM(r1) + mflr r0 + PPC_STL r0,STKFRM+PPC_LR_STKOFF(r1) + mfmsr r6 + ori r7,r6,MSR_FP + cmpwi cr7,r3,0 + mtmsrd r7 + isync + beq cr7,1f + stfd fr0,STKFRM-16(r1) + bl get_fpr +1: li r9,-EFAULT +2: stfs fr0,0(r4) + li r9,0 +3: beq cr7,4f + lfd fr0,STKFRM-16(r1) +4: PPC_LL r0,STKFRM+PPC_LR_STKOFF(r1) + mtlr r0 + mtmsrd r6 + isync + mr r3,r9 + addi r1,r1,STKFRM + blr + extab 2b,3b + +/* Store FP reg N to double at *p. N is in r3, p in r4. */ +_GLOBAL(do_stfd) + PPC_STLU r1,-STKFRM(r1) + mflr r0 + PPC_STL r0,STKFRM+PPC_LR_STKOFF(r1) + mfmsr r6 + ori r7,r6,MSR_FP + cmpwi cr7,r3,0 + mtmsrd r7 + isync + beq cr7,1f + stfd fr0,STKFRM-16(r1) + bl get_fpr +1: li r9,-EFAULT +2: stfd fr0,0(r4) + li r9,0 +3: beq cr7,4f + lfd fr0,STKFRM-16(r1) +4: PPC_LL r0,STKFRM+PPC_LR_STKOFF(r1) + mtlr r0 + mtmsrd r6 + isync + mr r3,r9 + addi r1,r1,STKFRM + blr + extab 2b,3b + +#ifdef CONFIG_ALTIVEC +/* Get the contents of vrN into vr0; N is in r3. */ +_GLOBAL(get_vr) + mflr r0 + rlwinm r3,r3,3,0xf8 + bcl 20,31,1f + blr /* vr0 is already in vr0 */ + nop +reg = 1 + .rept 31 + vor vr0,reg,reg /* assembler doesn't know vmr? */ + blr +reg = reg + 1 + .endr +1: mflr r5 + add r5,r3,r5 + mtctr r5 + mtlr r0 + bctr + +/* Put the contents of vr0 into vrN; N is in r3. */ +_GLOBAL(put_vr) + mflr r0 + rlwinm r3,r3,3,0xf8 + bcl 20,31,1f + blr /* vr0 is already in vr0 */ + nop +reg = 1 + .rept 31 + vor reg,vr0,vr0 + blr +reg = reg + 1 + .endr +1: mflr r5 + add r5,r3,r5 + mtctr r5 + mtlr r0 + bctr + +/* Load vector reg N from *p. N is in r3, p in r4. */ +_GLOBAL(do_lvx) + PPC_STLU r1,-STKFRM(r1) + mflr r0 + PPC_STL r0,STKFRM+PPC_LR_STKOFF(r1) + mfmsr r6 + oris r7,r6,MSR_VEC@h + cmpwi cr7,r3,0 + li r8,STKFRM-16 + mtmsrd r7 + isync + beq cr7,1f + stvx vr0,r1,r8 +1: li r9,-EFAULT +2: lvx vr0,0,r4 + li r9,0 +3: beq cr7,4f + bl put_vr + lvx vr0,r1,r8 +4: PPC_LL r0,STKFRM+PPC_LR_STKOFF(r1) + mtlr r0 + mtmsrd r6 + isync + mr r3,r9 + addi r1,r1,STKFRM + blr + extab 2b,3b + +/* Store vector reg N to *p. N is in r3, p in r4. */ +_GLOBAL(do_stvx) + PPC_STLU r1,-STKFRM(r1) + mflr r0 + PPC_STL r0,STKFRM+PPC_LR_STKOFF(r1) + mfmsr r6 + oris r7,r6,MSR_VEC@h + cmpwi cr7,r3,0 + li r8,STKFRM-16 + mtmsrd r7 + isync + beq cr7,1f + stvx vr0,r1,r8 + bl get_vr +1: li r9,-EFAULT +2: stvx vr0,0,r4 + li r9,0 +3: beq cr7,4f + lvx vr0,r1,r8 +4: PPC_LL r0,STKFRM+PPC_LR_STKOFF(r1) + mtlr r0 + mtmsrd r6 + isync + mr r3,r9 + addi r1,r1,STKFRM + blr + extab 2b,3b +#endif /* CONFIG_ALTIVEC */ + +#ifdef CONFIG_VSX +/* Get the contents of vsrN into vsr0; N is in r3. */ +_GLOBAL(get_vsr) + mflr r0 + rlwinm r3,r3,3,0x1f8 + bcl 20,31,1f + blr /* vsr0 is already in vsr0 */ + nop +reg = 1 + .rept 63 + XXLOR(0,reg,reg) + blr +reg = reg + 1 + .endr +1: mflr r5 + add r5,r3,r5 + mtctr r5 + mtlr r0 + bctr + +/* Put the contents of vsr0 into vsrN; N is in r3. */ +_GLOBAL(put_vsr) + mflr r0 + rlwinm r3,r3,3,0x1f8 + bcl 20,31,1f + blr /* vr0 is already in vr0 */ + nop +reg = 1 + .rept 63 + XXLOR(reg,0,0) + blr +reg = reg + 1 + .endr +1: mflr r5 + add r5,r3,r5 + mtctr r5 + mtlr r0 + bctr + +/* Load VSX reg N from vector doubleword *p. N is in r3, p in r4. */ +_GLOBAL(do_lxvd2x) + PPC_STLU r1,-STKFRM(r1) + mflr r0 + PPC_STL r0,STKFRM+PPC_LR_STKOFF(r1) + mfmsr r6 + oris r7,r6,MSR_VSX@h + cmpwi cr7,r3,0 + li r8,STKFRM-16 + mtmsrd r7 + isync + beq cr7,1f + STXVD2X(0,r1,r8) +1: li r9,-EFAULT +2: LXVD2X(0,0,r4) + li r9,0 +3: beq cr7,4f + bl put_vsr + LXVD2X(0,r1,r8) +4: PPC_LL r0,STKFRM+PPC_LR_STKOFF(r1) + mtlr r0 + mtmsrd r6 + isync + mr r3,r9 + addi r1,r1,STKFRM + blr + extab 2b,3b + +/* Store VSX reg N to vector doubleword *p. N is in r3, p in r4. */ +_GLOBAL(do_stxvd2x) + PPC_STLU r1,-STKFRM(r1) + mflr r0 + PPC_STL r0,STKFRM+PPC_LR_STKOFF(r1) + mfmsr r6 + oris r7,r6,MSR_VSX@h + cmpwi cr7,r3,0 + li r8,STKFRM-16 + mtmsrd r7 + isync + beq cr7,1f + STXVD2X(0,r1,r8) + bl get_vsr +1: li r9,-EFAULT +2: STXVD2X(0,0,r4) + li r9,0 +3: beq cr7,4f + LXVD2X(0,r1,r8) +4: PPC_LL r0,STKFRM+PPC_LR_STKOFF(r1) + mtlr r0 + mtmsrd r6 + isync + mr r3,r9 + addi r1,r1,STKFRM + blr + extab 2b,3b + +#endif /* CONFIG_VSX */ diff --git a/arch/powerpc/lib/sstep.c b/arch/powerpc/lib/sstep.c index 13b7d54..e0a9858 100644 --- a/arch/powerpc/lib/sstep.c +++ b/arch/powerpc/lib/sstep.c @@ -13,6 +13,8 @@ #include <linux/ptrace.h> #include <asm/sstep.h> #include <asm/processor.h> +#include <asm/uaccess.h> +#include <asm/cputable.h> extern char system_call_common[]; @@ -23,6 +25,23 @@ extern char system_call_common[]; #define MSR_MASK 0x87c0ffff #endif +/* Bits in XER */ +#define XER_SO 0x80000000U +#define XER_OV 0x40000000U +#define XER_CA 0x20000000U + +/* + * Functions in ldstfp.S + */ +extern int do_lfs(int rn, unsigned long ea); +extern int do_lfd(int rn, unsigned long ea); +extern int do_stfs(int rn, unsigned long ea); +extern int do_stfd(int rn, unsigned long ea); +extern int do_lvx(int rn, unsigned long ea); +extern int do_stvx(int rn, unsigned long ea); +extern int do_lxvd2x(int rn, unsigned long ea); +extern int do_stxvd2x(int rn, unsigned long ea); + /* * Determine whether a conditional branch instruction would branch. */ @@ -46,16 +65,499 @@ static int __kprobes branch_taken(unsigned int instr, struct pt_regs *regs) return 1; } + +static long __kprobes address_ok(struct pt_regs *regs, unsigned long ea, int nb) +{ + if (!user_mode(regs)) + return 1; + return __access_ok(ea, nb, USER_DS); +} + +/* + * Calculate effective address for a D-form instruction + */ +static unsigned long __kprobes dform_ea(unsigned int instr, struct pt_regs *regs) +{ + int ra; + unsigned long ea; + + ra = (instr >> 16) & 0x1f; + ea = (signed short) instr; /* sign-extend */ + if (ra) { + ea += regs->gpr[ra]; + if (instr & 0x04000000) /* update forms */ + regs->gpr[ra] = ea; + } +#ifdef __powerpc64__ + if (!(regs->msr & MSR_SF)) + ea &= 0xffffffffUL; +#endif + return ea; +} + +#ifdef __powerpc64__ +/* + * Calculate effective address for a DS-form instruction + */ +static unsigned long __kprobes dsform_ea(unsigned int instr, struct pt_regs *regs) +{ + int ra; + unsigned long ea; + + ra = (instr >> 16) & 0x1f; + ea = (signed short) (instr & ~3); /* sign-extend */ + if (ra) { + ea += regs->gpr[ra]; + if ((instr & 3) == 1) /* update forms */ + regs->gpr[ra] = ea; + } + if (!(regs->msr & MSR_SF)) + ea &= 0xffffffffUL; + return ea; +} +#endif /* __powerpc64 */ + +/* + * Calculate effective address for an X-form instruction + */ +static unsigned long __kprobes xform_ea(unsigned int instr, struct pt_regs *regs, + int do_update) +{ + int ra, rb; + unsigned long ea; + + ra = (instr >> 16) & 0x1f; + rb = (instr >> 11) & 0x1f; + ea = regs->gpr[rb]; + if (ra) { + ea += regs->gpr[ra]; + if (do_update) /* update forms */ + regs->gpr[ra] = ea; + } +#ifdef __powerpc64__ + if (!(regs->msr & MSR_SF)) + ea &= 0xffffffffUL; +#endif + return ea; +} + +/* + * Return the largest power of 2, not greater than sizeof(unsigned long), + * such that x is a multiple of it. + */ +static inline unsigned long max_align(unsigned long x) +{ + x |= sizeof(unsigned long); + return x & -x; /* isolates rightmost bit */ +} + + +static inline unsigned long byterev_2(unsigned long x) +{ + return ((x >> 8) & 0xff) | ((x & 0xff) << 8); +} + +static inline unsigned long byterev_4(unsigned long x) +{ + return ((x >> 24) & 0xff) | ((x >> 8) & 0xff00) | + ((x & 0xff00) << 8) | ((x & 0xff) << 24); +} + +#ifdef __powerpc64__ +static inline unsigned long byterev_8(unsigned long x) +{ + return (byterev_4(x) << 32) | byterev_4(x >> 32); +} +#endif + +static int __kprobes read_mem_aligned(unsigned long *dest, unsigned long ea, + int nb) +{ + int err = 0; + unsigned long x = 0; + + switch (nb) { + case 1: + err = __get_user(x, (unsigned char __user *) ea); + break; + case 2: + err = __get_user(x, (unsigned short __user *) ea); + break; + case 4: + err = __get_user(x, (unsigned int __user *) ea); + break; +#ifdef __powerpc64__ + case 8: + err = __get_user(x, (unsigned long __user *) ea); + break; +#endif + } + if (!err) + *dest = x; + return err; +} + +static int __kprobes read_mem_unaligned(unsigned long *dest, unsigned long ea, + int nb, struct pt_regs *regs) +{ + int err; + unsigned long x, b, c; + + /* unaligned, do this in pieces */ + x = 0; + for (; nb > 0; nb -= c) { + c = max_align(ea); + if (c > nb) + c = max_align(nb); + err = read_mem_aligned(&b, ea, c); + if (err) + return err; + x = (x << (8 * c)) + b; + ea += c; + } + *dest = x; + return 0; +} + +/* + * Read memory at address ea for nb bytes, return 0 for success + * or -EFAULT if an error occurred. + */ +static int __kprobes read_mem(unsigned long *dest, unsigned long ea, int nb, + struct pt_regs *regs) +{ + if (!address_ok(regs, ea, nb)) + return -EFAULT; + if ((ea & (nb - 1)) == 0) + return read_mem_aligned(dest, ea, nb); + return read_mem_unaligned(dest, ea, nb, regs); +} + +static int __kprobes write_mem_aligned(unsigned long val, unsigned long ea, + int nb) +{ + int err = 0; + + switch (nb) { + case 1: + err = __put_user(val, (unsigned char __user *) ea); + break; + case 2: + err = __put_user(val, (unsigned short __user *) ea); + break; + case 4: + err = __put_user(val, (unsigned int __user *) ea); + break; +#ifdef __powerpc64__ + case 8: + err = __put_user(val, (unsigned long __user *) ea); + break; +#endif + } + return err; +} + +static int __kprobes write_mem_unaligned(unsigned long val, unsigned long ea, + int nb, struct pt_regs *regs) +{ + int err; + unsigned long c; + + /* unaligned or little-endian, do this in pieces */ + for (; nb > 0; nb -= c) { + c = max_align(ea); + if (c > nb) + c = max_align(nb); + err = write_mem_aligned(val >> (nb - c) * 8, ea, c); + if (err) + return err; + ++ea; + } + return 0; +} + +/* + * Write memory at address ea for nb bytes, return 0 for success + * or -EFAULT if an error occurred. + */ +static int __kprobes write_mem(unsigned long val, unsigned long ea, int nb, + struct pt_regs *regs) +{ + if (!address_ok(regs, ea, nb)) + return -EFAULT; + if ((ea & (nb - 1)) == 0) + return write_mem_aligned(val, ea, nb); + return write_mem_unaligned(val, ea, nb, regs); +} + /* - * Emulate instructions that cause a transfer of control. + * Check the address and alignment, and call func to do the actual + * load or store. + */ +static int __kprobes do_fp_load(int rn, int (*func)(int, unsigned long), + unsigned long ea, int nb, + struct pt_regs *regs) +{ + int err; + unsigned long val[sizeof(double) / sizeof(long)]; + unsigned long ptr; + + if (!address_ok(regs, ea, nb)) + return -EFAULT; + if ((ea & 3) == 0) + return (*func)(rn, ea); + ptr = (unsigned long) &val[0]; + if (sizeof(unsigned long) == 8 || nb == 4) { + err = read_mem_unaligned(&val[0], ea, nb, regs); + ptr += sizeof(unsigned long) - nb; + } else { + /* reading a double on 32-bit */ + err = read_mem_unaligned(&val[0], ea, 4, regs); + if (!err) + err = read_mem_unaligned(&val[1], ea + 4, 4, regs); + } + if (err) + return err; + return (*func)(rn, ptr); +} + +static int __kprobes do_fp_store(int rn, int (*func)(int, unsigned long), + unsigned long ea, int nb, + struct pt_regs *regs) +{ + int err; + unsigned long val[sizeof(double) / sizeof(long)]; + unsigned long ptr; + + if (!address_ok(regs, ea, nb)) + return -EFAULT; + if ((ea & 3) == 0) + return (*func)(rn, ea); + ptr = (unsigned long) &val[0]; + if (sizeof(unsigned long) == 8 || nb == 4) { + ptr += sizeof(unsigned long) - nb; + err = (*func)(rn, ptr); + if (err) + return err; + err = write_mem_unaligned(val[0], ea, nb, regs); + } else { + /* writing a double on 32-bit */ + err = (*func)(rn, ptr); + if (err) + return err; + err = write_mem_unaligned(val[0], ea, 4, regs); + if (!err) + err = write_mem_unaligned(val[1], ea + 4, 4, regs); + } + return err; +} + +#ifdef CONFIG_ALTIVEC +/* For Altivec/VMX, no need to worry about alignment */ +static int __kprobes do_vec_load(int rn, int (*func)(int, unsigned long), + unsigned long ea, struct pt_regs *regs) +{ + if (!address_ok(regs, ea & ~0xfUL, 16)) + return -EFAULT; + return (*func)(rn, ea); +} + +static int __kprobes do_vec_store(int rn, int (*func)(int, unsigned long), + unsigned long ea, struct pt_regs *regs) +{ + if (!address_ok(regs, ea & ~0xfUL, 16)) + return -EFAULT; + return (*func)(rn, ea); +} +#endif /* CONFIG_ALTIVEC */ + +#ifdef CONFIG_VSX +static int __kprobes do_vsx_load(int rn, int (*func)(int, unsigned long), + unsigned long ea, struct pt_regs *regs) +{ + int err; + unsigned long val[2]; + + if (!address_ok(regs, ea, 16)) + return -EFAULT; + if ((ea & 3) == 0) + return (*func)(rn, ea); + err = read_mem_unaligned(&val[0], ea, 8, regs); + if (!err) + err = read_mem_unaligned(&val[1], ea + 8, 8, regs); + if (!err) + err = (*func)(rn, (unsigned long) &val[0]); + return err; +} + +static int __kprobes do_vsx_store(int rn, int (*func)(int, unsigned long), + unsigned long ea, struct pt_regs *regs) +{ + int err; + unsigned long val[2]; + + if (!address_ok(regs, ea, 16)) + return -EFAULT; + if ((ea & 3) == 0) + return (*func)(rn, ea); + err = (*func)(rn, (unsigned long) &val[0]); + if (err) + return err; + err = write_mem_unaligned(val[0], ea, 8, regs); + if (!err) + err = write_mem_unaligned(val[1], ea + 8, 8, regs); + return err; +} +#endif /* CONFIG_VSX */ + +#define __put_user_asmx(x, addr, err, op, cr) \ + __asm__ __volatile__( \ + "1: " op " %2,0,%3\n" \ + " mfcr %1\n" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3: li %0,%4\n" \ + " b 2b\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n" \ + PPC_LONG_ALIGN "\n" \ + PPC_LONG "1b,3b\n" \ + ".previous" \ + : "=r" (err), "=r" (cr) \ + : "r" (x), "r" (addr), "i" (-EFAULT), "0" (err)) + +#define __get_user_asmx(x, addr, err, op) \ + __asm__ __volatile__( \ + "1: "op" %1,0,%2\n" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3: li %0,%3\n" \ + " b 2b\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n" \ + PPC_LONG_ALIGN "\n" \ + PPC_LONG "1b,3b\n" \ + ".previous" \ + : "=r" (err), "=r" (x) \ + : "r" (addr), "i" (-EFAULT), "0" (err)) + +#define __cacheop_user_asmx(addr, err, op) \ + __asm__ __volatile__( \ + "1: "op" 0,%1\n" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3: li %0,%3\n" \ + " b 2b\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n" \ + PPC_LONG_ALIGN "\n" \ + PPC_LONG "1b,3b\n" \ + ".previous" \ + : "=r" (err) \ + : "r" (addr), "i" (-EFAULT), "0" (err)) + +static void __kprobes set_cr0(struct pt_regs *regs, int rd) +{ + long val = regs->gpr[rd]; + + regs->ccr = (regs->ccr & 0x0fffffff) | ((regs->xer >> 3) & 0x10000000); +#ifdef __powerpc64__ + if (!(regs->msr & MSR_SF)) + val = (int) val; +#endif + if (val < 0) + regs->ccr |= 0x80000000; + else if (val > 0) + regs->ccr |= 0x40000000; + else + regs->ccr |= 0x20000000; +} + +static void __kprobes add_with_carry(struct pt_regs *regs, int rd, + unsigned long val1, unsigned long val2, + unsigned long carry_in) +{ + unsigned long val = val1 + val2; + + if (carry_in) + ++val; + regs->gpr[rd] = val; +#ifdef __powerpc64__ + if (!(regs->msr & MSR_SF)) { + val = (unsigned int) val; + val1 = (unsigned int) val1; + } +#endif + if (val < val1 || (carry_in && val == val1)) + regs->xer |= XER_CA; + else + regs->xer &= ~XER_CA; +} + +static void __kprobes do_cmp_signed(struct pt_regs *regs, long v1, long v2, + int crfld) +{ + unsigned int crval, shift; + + crval = (regs->xer >> 31) & 1; /* get SO bit */ + if (v1 < v2) + crval |= 8; + else if (v1 > v2) + crval |= 4; + else + crval |= 2; + shift = (7 - crfld) * 4; + regs->ccr = (regs->ccr & ~(0xf << shift)) | (crval << shift); +} + +static void __kprobes do_cmp_unsigned(struct pt_regs *regs, unsigned long v1, + unsigned long v2, int crfld) +{ + unsigned int crval, shift; + + crval = (regs->xer >> 31) & 1; /* get SO bit */ + if (v1 < v2) + crval |= 8; + else if (v1 > v2) + crval |= 4; + else + crval |= 2; + shift = (7 - crfld) * 4; + regs->ccr = (regs->ccr & ~(0xf << shift)) | (crval << shift); +} + +/* + * Elements of 32-bit rotate and mask instructions. + */ +#define MASK32(mb, me) ((0xffffffffUL >> (mb)) + \ + ((signed long)-0x80000000L >> (me)) + ((me) >= (mb))) +#ifdef __powerpc64__ +#define MASK64_L(mb) (~0UL >> (mb)) +#define MASK64_R(me) ((signed long)-0x8000000000000000L >> (me)) +#define MASK64(mb, me) (MASK64_L(mb) + MASK64_R(me) + ((me) >= (mb))) +#define DATA32(x) (((x) & 0xffffffffUL) | (((x) & 0xffffffffUL) << 32)) +#else +#define DATA32(x) (x) +#endif +#define ROTATE(x, n) ((n) ? (((x) << (n)) | ((x) >> (8 * sizeof(long) - (n)))) : (x)) + +/* + * Emulate instructions that cause a transfer of control, + * loads and stores, and a few other instructions. * Returns 1 if the step was emulated, 0 if not, * or -1 if the instruction is one that should not be stepped, * such as an rfid, or a mtmsrd that would clear MSR_RI. */ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr) { - unsigned int opcode, rs, rb, rd, spr; + unsigned int opcode, ra, rb, rd, spr, u; unsigned long int imm; + unsigned long int val, val2; + unsigned long int ea; + unsigned int cr, mb, me, sh; + int err; + unsigned long old_ra; + long ival; opcode = instr >> 26; switch (opcode) { @@ -78,7 +580,13 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr) * entry code works. If that is changed, this will * need to be changed also. */ + if (regs->gpr[0] == 0x1ebe && + cpu_has_feature(CPU_FTR_REAL_LE)) { + regs->msr ^= MSR_LE; + goto instr_done; + } regs->gpr[9] = regs->gpr[13]; + regs->gpr[10] = MSR_KERNEL; regs->gpr[11] = regs->nip + 4; regs->gpr[12] = regs->msr & MSR_MASK; regs->gpr[13] = (unsigned long) get_paca(); @@ -102,9 +610,9 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr) regs->nip = imm; return 1; case 19: - switch (instr & 0x7fe) { - case 0x20: /* bclr */ - case 0x420: /* bcctr */ + switch ((instr >> 1) & 0x3ff) { + case 16: /* bclr */ + case 528: /* bcctr */ imm = (instr & 0x400)? regs->ctr: regs->link; regs->nip += 4; if ((regs->msr & MSR_SF) == 0) { @@ -116,30 +624,233 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr) if (branch_taken(instr, regs)) regs->nip = imm; return 1; - case 0x24: /* rfid, scary */ + + case 18: /* rfid, scary */ return -1; + + case 150: /* isync */ + isync(); + goto instr_done; + + case 33: /* crnor */ + case 129: /* crandc */ + case 193: /* crxor */ + case 225: /* crnand */ + case 257: /* crand */ + case 289: /* creqv */ + case 417: /* crorc */ + case 449: /* cror */ + ra = (instr >> 16) & 0x1f; + rb = (instr >> 11) & 0x1f; + rd = (instr >> 21) & 0x1f; + ra = (regs->ccr >> (31 - ra)) & 1; + rb = (regs->ccr >> (31 - rb)) & 1; + val = (instr >> (6 + ra * 2 + rb)) & 1; + regs->ccr = (regs->ccr & ~(1UL << (31 - rd))) | + (val << (31 - rd)); + goto instr_done; + } + break; + case 31: + switch ((instr >> 1) & 0x3ff) { + case 598: /* sync */ +#ifdef __powerpc64__ + switch ((instr >> 21) & 3) { + case 1: /* lwsync */ + asm volatile("lwsync" : : : "memory"); + goto instr_done; + case 2: /* ptesync */ + asm volatile("ptesync" : : : "memory"); + goto instr_done; + } +#endif + mb(); + goto instr_done; + + case 854: /* eieio */ + eieio(); + goto instr_done; + } + break; + } + + /* Following cases refer to regs->gpr[], so we need all regs */ + if (!FULL_REGS(regs)) + return 0; + + rd = (instr >> 21) & 0x1f; + ra = (instr >> 16) & 0x1f; + rb = (instr >> 11) & 0x1f; + + switch (opcode) { + case 7: /* mulli */ + regs->gpr[rd] = regs->gpr[ra] * (short) instr; + goto instr_done; + + case 8: /* subfic */ + imm = (short) instr; + add_with_carry(regs, rd, ~regs->gpr[ra], imm, 1); + goto instr_done; + + case 10: /* cmpli */ + imm = (unsigned short) instr; + val = regs->gpr[ra]; +#ifdef __powerpc64__ + if ((rd & 1) == 0) + val = (unsigned int) val; +#endif + do_cmp_unsigned(regs, val, imm, rd >> 2); + goto instr_done; + + case 11: /* cmpi */ + imm = (short) instr; + val = regs->gpr[ra]; +#ifdef __powerpc64__ + if ((rd & 1) == 0) + val = (int) val; +#endif + do_cmp_signed(regs, val, imm, rd >> 2); + goto instr_done; + + case 12: /* addic */ + imm = (short) instr; + add_with_carry(regs, rd, regs->gpr[ra], imm, 0); + goto instr_done; + + case 13: /* addic. */ + imm = (short) instr; + add_with_carry(regs, rd, regs->gpr[ra], imm, 0); + set_cr0(regs, rd); + goto instr_done; + + case 14: /* addi */ + imm = (short) instr; + if (ra) + imm += regs->gpr[ra]; + regs->gpr[rd] = imm; + goto instr_done; + + case 15: /* addis */ + imm = ((short) instr) << 16; + if (ra) + imm += regs->gpr[ra]; + regs->gpr[rd] = imm; + goto instr_done; + + case 20: /* rlwimi */ + mb = (instr >> 6) & 0x1f; + me = (instr >> 1) & 0x1f; + val = DATA32(regs->gpr[rd]); + imm = MASK32(mb, me); + regs->gpr[ra] = (regs->gpr[ra] & ~imm) | (ROTATE(val, rb) & imm); + goto logical_done; + + case 21: /* rlwinm */ + mb = (instr >> 6) & 0x1f; + me = (instr >> 1) & 0x1f; + val = DATA32(regs->gpr[rd]); + regs->gpr[ra] = ROTATE(val, rb) & MASK32(mb, me); + goto logical_done; + + case 23: /* rlwnm */ + mb = (instr >> 6) & 0x1f; + me = (instr >> 1) & 0x1f; + rb = regs->gpr[rb] & 0x1f; + val = DATA32(regs->gpr[rd]); + regs->gpr[ra] = ROTATE(val, rb) & MASK32(mb, me); + goto logical_done; + + case 24: /* ori */ + imm = (unsigned short) instr; + regs->gpr[ra] = regs->gpr[rd] | imm; + goto instr_done; + + case 25: /* oris */ + imm = (unsigned short) instr; + regs->gpr[ra] = regs->gpr[rd] | (imm << 16); + goto instr_done; + + case 26: /* xori */ + imm = (unsigned short) instr; + regs->gpr[ra] = regs->gpr[rd] ^ imm; + goto instr_done; + + case 27: /* xoris */ + imm = (unsigned short) instr; + regs->gpr[ra] = regs->gpr[rd] ^ (imm << 16); + goto instr_done; + + case 28: /* andi. */ + imm = (unsigned short) instr; + regs->gpr[ra] = regs->gpr[rd] & imm; + set_cr0(regs, ra); + goto instr_done; + + case 29: /* andis. */ + imm = (unsigned short) instr; + regs->gpr[ra] = regs->gpr[rd] & (imm << 16); + set_cr0(regs, ra); + goto instr_done; + +#ifdef __powerpc64__ + case 30: /* rld* */ + mb = ((instr >> 6) & 0x1f) | (instr & 0x20); + val = regs->gpr[rd]; + if ((instr & 0x10) == 0) { + sh = rb | ((instr & 2) << 4); + val = ROTATE(val, sh); + switch ((instr >> 2) & 3) { + case 0: /* rldicl */ + regs->gpr[ra] = val & MASK64_L(mb); + goto logical_done; + case 1: /* rldicr */ + regs->gpr[ra] = val & MASK64_R(mb); + goto logical_done; + case 2: /* rldic */ + regs->gpr[ra] = val & MASK64(mb, 63 - sh); + goto logical_done; + case 3: /* rldimi */ + imm = MASK64(mb, 63 - sh); + regs->gpr[ra] = (regs->gpr[ra] & ~imm) | + (val & imm); + goto logical_done; + } + } else { + sh = regs->gpr[rb] & 0x3f; + val = ROTATE(val, sh); + switch ((instr >> 1) & 7) { + case 0: /* rldcl */ + regs->gpr[ra] = val & MASK64_L(mb); + goto logical_done; + case 1: /* rldcr */ + regs->gpr[ra] = val & MASK64_R(mb); + goto logical_done; + } } +#endif + case 31: - rd = (instr >> 21) & 0x1f; - switch (instr & 0x7fe) { - case 0xa6: /* mfmsr */ + switch ((instr >> 1) & 0x3ff) { + case 83: /* mfmsr */ + if (regs->msr & MSR_PR) + break; regs->gpr[rd] = regs->msr & MSR_MASK; - regs->nip += 4; - if ((regs->msr & MSR_SF) == 0) - regs->nip &= 0xffffffffUL; - return 1; - case 0x124: /* mtmsr */ + goto instr_done; + case 146: /* mtmsr */ + if (regs->msr & MSR_PR) + break; imm = regs->gpr[rd]; if ((imm & MSR_RI) == 0) /* can't step mtmsr that would clear MSR_RI */ return -1; regs->msr = imm; - regs->nip += 4; - return 1; + goto instr_done; #ifdef CONFIG_PPC64 - case 0x164: /* mtmsrd */ + case 178: /* mtmsrd */ /* only MSR_EE and MSR_RI get changed if bit 15 set */ /* mtmsrd doesn't change MSR_HV and MSR_ME */ + if (regs->msr & MSR_PR) + break; imm = (instr & 0x10000)? 0x8002: 0xefffffffffffefffUL; imm = (regs->msr & MSR_MASK & ~imm) | (regs->gpr[rd] & imm); @@ -147,57 +858,770 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr) /* can't step mtmsrd that would clear MSR_RI */ return -1; regs->msr = imm; - regs->nip += 4; - if ((imm & MSR_SF) == 0) - regs->nip &= 0xffffffffUL; - return 1; + goto instr_done; #endif - case 0x26: /* mfcr */ + case 19: /* mfcr */ regs->gpr[rd] = regs->ccr; regs->gpr[rd] &= 0xffffffffUL; - goto mtspr_out; - case 0x2a6: /* mfspr */ + goto instr_done; + + case 144: /* mtcrf */ + imm = 0xf0000000UL; + val = regs->gpr[rd]; + for (sh = 0; sh < 8; ++sh) { + if (instr & (0x80000 >> sh)) + regs->ccr = (regs->ccr & ~imm) | + (val & imm); + imm >>= 4; + } + goto instr_done; + + case 339: /* mfspr */ spr = (instr >> 11) & 0x3ff; switch (spr) { case 0x20: /* mfxer */ regs->gpr[rd] = regs->xer; regs->gpr[rd] &= 0xffffffffUL; - goto mtspr_out; + goto instr_done; case 0x100: /* mflr */ regs->gpr[rd] = regs->link; - goto mtspr_out; + goto instr_done; case 0x120: /* mfctr */ regs->gpr[rd] = regs->ctr; - goto mtspr_out; - } - break; - case 0x378: /* orx */ - if (instr & 1) - break; - rs = (instr >> 21) & 0x1f; - rb = (instr >> 11) & 0x1f; - if (rs == rb) { /* mr */ - rd = (instr >> 16) & 0x1f; - regs->gpr[rd] = regs->gpr[rs]; - goto mtspr_out; + goto instr_done; } break; - case 0x3a6: /* mtspr */ + + case 467: /* mtspr */ spr = (instr >> 11) & 0x3ff; switch (spr) { case 0x20: /* mtxer */ regs->xer = (regs->gpr[rd] & 0xffffffffUL); - goto mtspr_out; + goto instr_done; case 0x100: /* mtlr */ regs->link = regs->gpr[rd]; - goto mtspr_out; + goto instr_done; case 0x120: /* mtctr */ regs->ctr = regs->gpr[rd]; -mtspr_out: - regs->nip += 4; - return 1; + goto instr_done; } + break; + +/* + * Compare instructions + */ + case 0: /* cmp */ + val = regs->gpr[ra]; + val2 = regs->gpr[rb]; +#ifdef __powerpc64__ + if ((rd & 1) == 0) { + /* word (32-bit) compare */ + val = (int) val; + val2 = (int) val2; + } +#endif + do_cmp_signed(regs, val, val2, rd >> 2); + goto instr_done; + + case 32: /* cmpl */ + val = regs->gpr[ra]; + val2 = regs->gpr[rb]; +#ifdef __powerpc64__ + if ((rd & 1) == 0) { + /* word (32-bit) compare */ + val = (unsigned int) val; + val2 = (unsigned int) val2; + } +#endif + do_cmp_unsigned(regs, val, val2, rd >> 2); + goto instr_done; + +/* + * Arithmetic instructions + */ + case 8: /* subfc */ + add_with_carry(regs, rd, ~regs->gpr[ra], + regs->gpr[rb], 1); + goto arith_done; +#ifdef __powerpc64__ + case 9: /* mulhdu */ + asm("mulhdu %0,%1,%2" : "=r" (regs->gpr[rd]) : + "r" (regs->gpr[ra]), "r" (regs->gpr[rb])); + goto arith_done; +#endif + case 10: /* addc */ + add_with_carry(regs, rd, regs->gpr[ra], + regs->gpr[rb], 0); + goto arith_done; + + case 11: /* mulhwu */ + asm("mulhwu %0,%1,%2" : "=r" (regs->gpr[rd]) : + "r" (regs->gpr[ra]), "r" (regs->gpr[rb])); + goto arith_done; + + case 40: /* subf */ + regs->gpr[rd] = regs->gpr[rb] - regs->gpr[ra]; + goto arith_done; +#ifdef __powerpc64__ + case 73: /* mulhd */ + asm("mulhd %0,%1,%2" : "=r" (regs->gpr[rd]) : + "r" (regs->gpr[ra]), "r" (regs->gpr[rb])); + goto arith_done; +#endif + case 75: /* mulhw */ + asm("mulhw %0,%1,%2" : "=r" (regs->gpr[rd]) : + "r" (regs->gpr[ra]), "r" (regs->gpr[rb])); + goto arith_done; + + case 104: /* neg */ + regs->gpr[rd] = -regs->gpr[ra]; + goto arith_done; + + case 136: /* subfe */ + add_with_carry(regs, rd, ~regs->gpr[ra], regs->gpr[rb], + regs->xer & XER_CA); + goto arith_done; + + case 138: /* adde */ + add_with_carry(regs, rd, regs->gpr[ra], regs->gpr[rb], + regs->xer & XER_CA); + goto arith_done; + + case 200: /* subfze */ + add_with_carry(regs, rd, ~regs->gpr[ra], 0L, + regs->xer & XER_CA); + goto arith_done; + + case 202: /* addze */ + add_with_carry(regs, rd, regs->gpr[ra], 0L, + regs->xer & XER_CA); + goto arith_done; + + case 232: /* subfme */ + add_with_carry(regs, rd, ~regs->gpr[ra], -1L, + regs->xer & XER_CA); + goto arith_done; +#ifdef __powerpc64__ + case 233: /* mulld */ + regs->gpr[rd] = regs->gpr[ra] * regs->gpr[rb]; + goto arith_done; +#endif + case 234: /* addme */ + add_with_carry(regs, rd, regs->gpr[ra], -1L, + regs->xer & XER_CA); + goto arith_done; + + case 235: /* mullw */ + regs->gpr[rd] = (unsigned int) regs->gpr[ra] * + (unsigned int) regs->gpr[rb]; + goto arith_done; + + case 266: /* add */ + regs->gpr[rd] = regs->gpr[ra] + regs->gpr[rb]; + goto arith_done; +#ifdef __powerpc64__ + case 457: /* divdu */ + regs->gpr[rd] = regs->gpr[ra] / regs->gpr[rb]; + goto arith_done; +#endif + case 459: /* divwu */ + regs->gpr[rd] = (unsigned int) regs->gpr[ra] / + (unsigned int) regs->gpr[rb]; + goto arith_done; +#ifdef __powerpc64__ + case 489: /* divd */ + regs->gpr[rd] = (long int) regs->gpr[ra] / + (long int) regs->gpr[rb]; + goto arith_done; +#endif + case 491: /* divw */ + regs->gpr[rd] = (int) regs->gpr[ra] / + (int) regs->gpr[rb]; + goto arith_done; + + +/* + * Logical instructions + */ + case 26: /* cntlzw */ + asm("cntlzw %0,%1" : "=r" (regs->gpr[ra]) : + "r" (regs->gpr[rd])); + goto logical_done; +#ifdef __powerpc64__ + case 58: /* cntlzd */ + asm("cntlzd %0,%1" : "=r" (regs->gpr[ra]) : + "r" (regs->gpr[rd])); + goto logical_done; +#endif + case 28: /* and */ + regs->gpr[ra] = regs->gpr[rd] & regs->gpr[rb]; + goto logical_done; + + case 60: /* andc */ + regs->gpr[ra] = regs->gpr[rd] & ~regs->gpr[rb]; + goto logical_done; + + case 124: /* nor */ + regs->gpr[ra] = ~(regs->gpr[rd] | regs->gpr[rb]); + goto logical_done; + + case 284: /* xor */ + regs->gpr[ra] = ~(regs->gpr[rd] ^ regs->gpr[rb]); + goto logical_done; + + case 316: /* xor */ + regs->gpr[ra] = regs->gpr[rd] ^ regs->gpr[rb]; + goto logical_done; + + case 412: /* orc */ + regs->gpr[ra] = regs->gpr[rd] | ~regs->gpr[rb]; + goto logical_done; + + case 444: /* or */ + regs->gpr[ra] = regs->gpr[rd] | regs->gpr[rb]; + goto logical_done; + + case 476: /* nand */ + regs->gpr[ra] = ~(regs->gpr[rd] & regs->gpr[rb]); + goto logical_done; + + case 922: /* extsh */ + regs->gpr[ra] = (signed short) regs->gpr[rd]; + goto logical_done; + + case 954: /* extsb */ + regs->gpr[ra] = (signed char) regs->gpr[rd]; + goto logical_done; +#ifdef __powerpc64__ + case 986: /* extsw */ + regs->gpr[ra] = (signed int) regs->gpr[rd]; + goto logical_done; +#endif + +/* + * Shift instructions + */ + case 24: /* slw */ + sh = regs->gpr[rb] & 0x3f; + if (sh < 32) + regs->gpr[ra] = (regs->gpr[rd] << sh) & 0xffffffffUL; + else + regs->gpr[ra] = 0; + goto logical_done; + + case 536: /* srw */ + sh = regs->gpr[rb] & 0x3f; + if (sh < 32) + regs->gpr[ra] = (regs->gpr[rd] & 0xffffffffUL) >> sh; + else + regs->gpr[ra] = 0; + goto logical_done; + + case 792: /* sraw */ + sh = regs->gpr[rb] & 0x3f; + ival = (signed int) regs->gpr[rd]; + regs->gpr[ra] = ival >> (sh < 32 ? sh : 31); + if (ival < 0 && (sh >= 32 || (ival & ((1 << sh) - 1)) != 0)) + regs->xer |= XER_CA; + else + regs->xer &= ~XER_CA; + goto logical_done; + + case 824: /* srawi */ + sh = rb; + ival = (signed int) regs->gpr[rd]; + regs->gpr[ra] = ival >> sh; + if (ival < 0 && (ival & ((1 << sh) - 1)) != 0) + regs->xer |= XER_CA; + else + regs->xer &= ~XER_CA; + goto logical_done; + +#ifdef __powerpc64__ + case 27: /* sld */ + sh = regs->gpr[rd] & 0x7f; + if (sh < 64) + regs->gpr[ra] = regs->gpr[rd] << sh; + else + regs->gpr[ra] = 0; + goto logical_done; + + case 539: /* srd */ + sh = regs->gpr[rb] & 0x7f; + if (sh < 64) + regs->gpr[ra] = regs->gpr[rd] >> sh; + else + regs->gpr[ra] = 0; + goto logical_done; + + case 794: /* srad */ + sh = regs->gpr[rb] & 0x7f; + ival = (signed long int) regs->gpr[rd]; + regs->gpr[ra] = ival >> (sh < 64 ? sh : 63); + if (ival < 0 && (sh >= 64 || (ival & ((1 << sh) - 1)) != 0)) + regs->xer |= XER_CA; + else + regs->xer &= ~XER_CA; + goto logical_done; + + case 826: /* sradi with sh_5 = 0 */ + case 827: /* sradi with sh_5 = 1 */ + sh = rb | ((instr & 2) << 4); + ival = (signed long int) regs->gpr[rd]; + regs->gpr[ra] = ival >> sh; + if (ival < 0 && (ival & ((1 << sh) - 1)) != 0) + regs->xer |= XER_CA; + else + regs->xer &= ~XER_CA; + goto logical_done; +#endif /* __powerpc64__ */ + +/* + * Cache instructions + */ + case 54: /* dcbst */ + ea = xform_ea(instr, regs, 0); + if (!address_ok(regs, ea, 8)) + return 0; + err = 0; + __cacheop_user_asmx(ea, err, "dcbst"); + if (err) + return 0; + goto instr_done; + + case 86: /* dcbf */ + ea = xform_ea(instr, regs, 0); + if (!address_ok(regs, ea, 8)) + return 0; + err = 0; + __cacheop_user_asmx(ea, err, "dcbf"); + if (err) + return 0; + goto instr_done; + + case 246: /* dcbtst */ + if (rd == 0) { + ea = xform_ea(instr, regs, 0); + prefetchw((void *) ea); + } + goto instr_done; + + case 278: /* dcbt */ + if (rd == 0) { + ea = xform_ea(instr, regs, 0); + prefetch((void *) ea); + } + goto instr_done; + } + break; } - return 0; + + /* + * Following cases are for loads and stores, so bail out + * if we're in little-endian mode. + */ + if (regs->msr & MSR_LE) + return 0; + + /* + * Save register RA in case it's an update form load or store + * and the access faults. + */ + old_ra = regs->gpr[ra]; + + switch (opcode) { + case 31: + u = instr & 0x40; + switch ((instr >> 1) & 0x3ff) { + case 20: /* lwarx */ + ea = xform_ea(instr, regs, 0); + if (ea & 3) + break; /* can't handle misaligned */ + err = -EFAULT; + if (!address_ok(regs, ea, 4)) + goto ldst_done; + err = 0; + __get_user_asmx(val, ea, err, "lwarx"); + if (!err) + regs->gpr[rd] = val; + goto ldst_done; + + case 150: /* stwcx. */ + ea = xform_ea(instr, regs, 0); + if (ea & 3) + break; /* can't handle misaligned */ + err = -EFAULT; + if (!address_ok(regs, ea, 4)) + goto ldst_done; + err = 0; + __put_user_asmx(regs->gpr[rd], ea, err, "stwcx.", cr); + if (!err) + regs->ccr = (regs->ccr & 0x0fffffff) | + (cr & 0xe0000000) | + ((regs->xer >> 3) & 0x10000000); + goto ldst_done; + +#ifdef __powerpc64__ + case 84: /* ldarx */ + ea = xform_ea(instr, regs, 0); + if (ea & 7) + break; /* can't handle misaligned */ + err = -EFAULT; + if (!address_ok(regs, ea, 8)) + goto ldst_done; + err = 0; + __get_user_asmx(val, ea, err, "ldarx"); + if (!err) + regs->gpr[rd] = val; + goto ldst_done; + + case 214: /* stdcx. */ + ea = xform_ea(instr, regs, 0); + if (ea & 7) + break; /* can't handle misaligned */ + err = -EFAULT; + if (!address_ok(regs, ea, 8)) + goto ldst_done; + err = 0; + __put_user_asmx(regs->gpr[rd], ea, err, "stdcx.", cr); + if (!err) + regs->ccr = (regs->ccr & 0x0fffffff) | + (cr & 0xe0000000) | + ((regs->xer >> 3) & 0x10000000); + goto ldst_done; + + case 21: /* ldx */ + case 53: /* ldux */ + err = read_mem(®s->gpr[rd], xform_ea(instr, regs, u), + 8, regs); + goto ldst_done; +#endif + + case 23: /* lwzx */ + case 55: /* lwzux */ + err = read_mem(®s->gpr[rd], xform_ea(instr, regs, u), + 4, regs); + goto ldst_done; + + case 87: /* lbzx */ + case 119: /* lbzux */ + err = read_mem(®s->gpr[rd], xform_ea(instr, regs, u), + 1, regs); + goto ldst_done; + +#ifdef CONFIG_ALTIVEC + case 103: /* lvx */ + case 359: /* lvxl */ + if (!(regs->msr & MSR_VEC)) + break; + ea = xform_ea(instr, regs, 0); + err = do_vec_load(rd, do_lvx, ea, regs); + goto ldst_done; + + case 231: /* stvx */ + case 487: /* stvxl */ + if (!(regs->msr & MSR_VEC)) + break; + ea = xform_ea(instr, regs, 0); + err = do_vec_store(rd, do_stvx, ea, regs); + goto ldst_done; +#endif /* CONFIG_ALTIVEC */ + +#ifdef __powerpc64__ + case 149: /* stdx */ + case 181: /* stdux */ + val = regs->gpr[rd]; + err = write_mem(val, xform_ea(instr, regs, u), 8, regs); + goto ldst_done; +#endif + + case 151: /* stwx */ + case 183: /* stwux */ + val = regs->gpr[rd]; + err = write_mem(val, xform_ea(instr, regs, u), 4, regs); + goto ldst_done; + + case 215: /* stbx */ + case 247: /* stbux */ + val = regs->gpr[rd]; + err = write_mem(val, xform_ea(instr, regs, u), 1, regs); + goto ldst_done; + + case 279: /* lhzx */ + case 311: /* lhzux */ + err = read_mem(®s->gpr[rd], xform_ea(instr, regs, u), + 2, regs); + goto ldst_done; + +#ifdef __powerpc64__ + case 341: /* lwax */ + case 373: /* lwaux */ + err = read_mem(®s->gpr[rd], xform_ea(instr, regs, u), + 4, regs); + if (!err) + regs->gpr[rd] = (signed int) regs->gpr[rd]; + goto ldst_done; +#endif + + case 343: /* lhax */ + case 375: /* lhaux */ + err = read_mem(®s->gpr[rd], xform_ea(instr, regs, u), + 2, regs); + if (!err) + regs->gpr[rd] = (signed short) regs->gpr[rd]; + goto ldst_done; + + case 407: /* sthx */ + case 439: /* sthux */ + val = regs->gpr[rd]; + err = write_mem(val, xform_ea(instr, regs, u), 2, regs); + goto ldst_done; + +#ifdef __powerpc64__ + case 532: /* ldbrx */ + err = read_mem(&val, xform_ea(instr, regs, 0), 8, regs); + if (!err) + regs->gpr[rd] = byterev_8(val); + goto ldst_done; + +#endif + + case 534: /* lwbrx */ + err = read_mem(&val, xform_ea(instr, regs, 0), 4, regs); + if (!err) + regs->gpr[rd] = byterev_4(val); + goto ldst_done; + + case 535: /* lfsx */ + case 567: /* lfsux */ + if (!(regs->msr & MSR_FP)) + break; + ea = xform_ea(instr, regs, u); + err = do_fp_load(rd, do_lfs, ea, 4, regs); + goto ldst_done; + + case 599: /* lfdx */ + case 631: /* lfdux */ + if (!(regs->msr & MSR_FP)) + break; + ea = xform_ea(instr, regs, u); + err = do_fp_load(rd, do_lfd, ea, 8, regs); + goto ldst_done; + + case 663: /* stfsx */ + case 695: /* stfsux */ + if (!(regs->msr & MSR_FP)) + break; + ea = xform_ea(instr, regs, u); + err = do_fp_store(rd, do_stfs, ea, 4, regs); + goto ldst_done; + + case 727: /* stfdx */ + case 759: /* stfdux */ + if (!(regs->msr & MSR_FP)) + break; + ea = xform_ea(instr, regs, u); + err = do_fp_store(rd, do_stfd, ea, 8, regs); + goto ldst_done; + +#ifdef __powerpc64__ + case 660: /* stdbrx */ + val = byterev_8(regs->gpr[rd]); + err = write_mem(val, xform_ea(instr, regs, 0), 8, regs); + goto ldst_done; + +#endif + case 662: /* stwbrx */ + val = byterev_4(regs->gpr[rd]); + err = write_mem(val, xform_ea(instr, regs, 0), 4, regs); + goto ldst_done; + + case 790: /* lhbrx */ + err = read_mem(&val, xform_ea(instr, regs, 0), 2, regs); + if (!err) + regs->gpr[rd] = byterev_2(val); + goto ldst_done; + + case 918: /* sthbrx */ + val = byterev_2(regs->gpr[rd]); + err = write_mem(val, xform_ea(instr, regs, 0), 2, regs); + goto ldst_done; + +#ifdef CONFIG_VSX + case 844: /* lxvd2x */ + case 876: /* lxvd2ux */ + if (!(regs->msr & MSR_VSX)) + break; + rd |= (instr & 1) << 5; + ea = xform_ea(instr, regs, u); + err = do_vsx_load(rd, do_lxvd2x, ea, regs); + goto ldst_done; + + case 972: /* stxvd2x */ + case 1004: /* stxvd2ux */ + if (!(regs->msr & MSR_VSX)) + break; + rd |= (instr & 1) << 5; + ea = xform_ea(instr, regs, u); + err = do_vsx_store(rd, do_stxvd2x, ea, regs); + goto ldst_done; + +#endif /* CONFIG_VSX */ + } + break; + + case 32: /* lwz */ + case 33: /* lwzu */ + err = read_mem(®s->gpr[rd], dform_ea(instr, regs), 4, regs); + goto ldst_done; + + case 34: /* lbz */ + case 35: /* lbzu */ + err = read_mem(®s->gpr[rd], dform_ea(instr, regs), 1, regs); + goto ldst_done; + + case 36: /* stw */ + case 37: /* stwu */ + val = regs->gpr[rd]; + err = write_mem(val, dform_ea(instr, regs), 4, regs); + goto ldst_done; + + case 38: /* stb */ + case 39: /* stbu */ + val = regs->gpr[rd]; + err = write_mem(val, dform_ea(instr, regs), 1, regs); + goto ldst_done; + + case 40: /* lhz */ + case 41: /* lhzu */ + err = read_mem(®s->gpr[rd], dform_ea(instr, regs), 2, regs); + goto ldst_done; + + case 42: /* lha */ + case 43: /* lhau */ + err = read_mem(®s->gpr[rd], dform_ea(instr, regs), 2, regs); + if (!err) + regs->gpr[rd] = (signed short) regs->gpr[rd]; + goto ldst_done; + + case 44: /* sth */ + case 45: /* sthu */ + val = regs->gpr[rd]; + err = write_mem(val, dform_ea(instr, regs), 2, regs); + goto ldst_done; + + case 46: /* lmw */ + ra = (instr >> 16) & 0x1f; + if (ra >= rd) + break; /* invalid form, ra in range to load */ + ea = dform_ea(instr, regs); + do { + err = read_mem(®s->gpr[rd], ea, 4, regs); + if (err) + return 0; + ea += 4; + } while (++rd < 32); + goto instr_done; + + case 47: /* stmw */ + ea = dform_ea(instr, regs); + do { + err = write_mem(regs->gpr[rd], ea, 4, regs); + if (err) + return 0; + ea += 4; + } while (++rd < 32); + goto instr_done; + + case 48: /* lfs */ + case 49: /* lfsu */ + if (!(regs->msr & MSR_FP)) + break; + ea = dform_ea(instr, regs); + err = do_fp_load(rd, do_lfs, ea, 4, regs); + goto ldst_done; + + case 50: /* lfd */ + case 51: /* lfdu */ + if (!(regs->msr & MSR_FP)) + break; + ea = dform_ea(instr, regs); + err = do_fp_load(rd, do_lfd, ea, 8, regs); + goto ldst_done; + + case 52: /* stfs */ + case 53: /* stfsu */ + if (!(regs->msr & MSR_FP)) + break; + ea = dform_ea(instr, regs); + err = do_fp_store(rd, do_stfs, ea, 4, regs); + goto ldst_done; + + case 54: /* stfd */ + case 55: /* stfdu */ + if (!(regs->msr & MSR_FP)) + break; + ea = dform_ea(instr, regs); + err = do_fp_store(rd, do_stfd, ea, 8, regs); + goto ldst_done; + +#ifdef __powerpc64__ + case 58: /* ld[u], lwa */ + switch (instr & 3) { + case 0: /* ld */ + err = read_mem(®s->gpr[rd], dsform_ea(instr, regs), + 8, regs); + goto ldst_done; + case 1: /* ldu */ + err = read_mem(®s->gpr[rd], dsform_ea(instr, regs), + 8, regs); + goto ldst_done; + case 2: /* lwa */ + err = read_mem(®s->gpr[rd], dsform_ea(instr, regs), + 4, regs); + if (!err) + regs->gpr[rd] = (signed int) regs->gpr[rd]; + goto ldst_done; + } + break; + + case 62: /* std[u] */ + val = regs->gpr[rd]; + switch (instr & 3) { + case 0: /* std */ + err = write_mem(val, dsform_ea(instr, regs), 8, regs); + goto ldst_done; + case 1: /* stdu */ + err = write_mem(val, dsform_ea(instr, regs), 8, regs); + goto ldst_done; + } + break; +#endif /* __powerpc64__ */ + + } + err = -EINVAL; + + ldst_done: + if (err) { + regs->gpr[ra] = old_ra; + return 0; /* invoke DSI if -EFAULT? */ + } + instr_done: + regs->nip += 4; +#ifdef __powerpc64__ + if ((regs->msr & MSR_SF) == 0) + regs->nip &= 0xffffffffUL; +#endif + return 1; + + logical_done: + if (instr & 1) + set_cr0(regs, ra); + goto instr_done; + + arith_done: + if (instr & 1) + set_cr0(regs, rd); + goto instr_done; } diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c index cdc7526..4b66a1e 100644 --- a/arch/powerpc/mm/fsl_booke_mmu.c +++ b/arch/powerpc/mm/fsl_booke_mmu.c @@ -104,9 +104,10 @@ unsigned long p_mapped_by_tlbcam(phys_addr_t pa) } /* - * Set up one of the I/D BAT (block address translation) register pairs. - * The parameters are not checked; in particular size must be a power - * of 4 between 4k and 256M. + * Set up a variable-size TLB entry (tlbcam). The parameters are not checked; + * in particular size must be a power of 4 between 4k and 256M (or 1G, for cpus + * that support extended page sizes). Note that while some cpus support a + * page size of 4G, we don't allow its use here. */ static void settlbcam(int index, unsigned long virt, phys_addr_t phys, unsigned long size, unsigned long flags, unsigned int pid) diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index aa731af..002878c 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -42,6 +42,12 @@ EXPORT_SYMBOL(node_data); static int min_common_depth; static int n_mem_addr_cells, n_mem_size_cells; +static int form1_affinity; + +#define MAX_DISTANCE_REF_POINTS 4 +static int distance_ref_points_depth; +static const unsigned int *distance_ref_points; +static int distance_lookup_table[MAX_NUMNODES][MAX_DISTANCE_REF_POINTS]; /* * Allocate node_to_cpumask_map based on number of available nodes @@ -204,6 +210,39 @@ static const u32 *of_get_usable_memory(struct device_node *memory) return prop; } +int __node_distance(int a, int b) +{ + int i; + int distance = LOCAL_DISTANCE; + + if (!form1_affinity) + return distance; + + for (i = 0; i < distance_ref_points_depth; i++) { + if (distance_lookup_table[a][i] == distance_lookup_table[b][i]) + break; + + /* Double the distance for each NUMA level */ + distance *= 2; + } + + return distance; +} + +static void initialize_distance_lookup_table(int nid, + const unsigned int *associativity) +{ + int i; + + if (!form1_affinity) + return; + + for (i = 0; i < distance_ref_points_depth; i++) { + distance_lookup_table[nid][i] = + associativity[distance_ref_points[i]]; + } +} + /* Returns nid in the range [0..MAX_NUMNODES-1], or -1 if no useful numa * info is found. */ @@ -225,6 +264,10 @@ static int of_node_to_nid_single(struct device_node *device) /* POWER4 LPAR uses 0xffff as invalid node */ if (nid == 0xffff || nid >= MAX_NUMNODES) nid = -1; + + if (nid > 0 && tmp[0] >= distance_ref_points_depth) + initialize_distance_lookup_table(nid, tmp); + out: return nid; } @@ -251,26 +294,10 @@ int of_node_to_nid(struct device_node *device) } EXPORT_SYMBOL_GPL(of_node_to_nid); -/* - * In theory, the "ibm,associativity" property may contain multiple - * associativity lists because a resource may be multiply connected - * into the machine. This resource then has different associativity - * characteristics relative to its multiple connections. We ignore - * this for now. We also assume that all cpu and memory sets have - * their distances represented at a common level. This won't be - * true for hierarchical NUMA. - * - * In any case the ibm,associativity-reference-points should give - * the correct depth for a normal NUMA system. - * - * - Dave Hansen <haveblue@us.ibm.com> - */ static int __init find_min_common_depth(void) { - int depth, index; - const unsigned int *ref_points; + int depth; struct device_node *rtas_root; - unsigned int len; struct device_node *chosen; const char *vec5; @@ -280,18 +307,28 @@ static int __init find_min_common_depth(void) return -1; /* - * this property is 2 32-bit integers, each representing a level of - * depth in the associativity nodes. The first is for an SMP - * configuration (should be all 0's) and the second is for a normal - * NUMA configuration. + * This property is a set of 32-bit integers, each representing + * an index into the ibm,associativity nodes. + * + * With form 0 affinity the first integer is for an SMP configuration + * (should be all 0's) and the second is for a normal NUMA + * configuration. We have only one level of NUMA. + * + * With form 1 affinity the first integer is the most significant + * NUMA boundary and the following are progressively less significant + * boundaries. There can be more than one level of NUMA. */ - index = 1; - ref_points = of_get_property(rtas_root, - "ibm,associativity-reference-points", &len); + distance_ref_points = of_get_property(rtas_root, + "ibm,associativity-reference-points", + &distance_ref_points_depth); + + if (!distance_ref_points) { + dbg("NUMA: ibm,associativity-reference-points not found.\n"); + goto err; + } + + distance_ref_points_depth /= sizeof(int); - /* - * For form 1 affinity information we want the first field - */ #define VEC5_AFFINITY_BYTE 5 #define VEC5_AFFINITY 0x80 chosen = of_find_node_by_path("/chosen"); @@ -299,19 +336,38 @@ static int __init find_min_common_depth(void) vec5 = of_get_property(chosen, "ibm,architecture-vec-5", NULL); if (vec5 && (vec5[VEC5_AFFINITY_BYTE] & VEC5_AFFINITY)) { dbg("Using form 1 affinity\n"); - index = 0; + form1_affinity = 1; } } - if ((len >= 2 * sizeof(unsigned int)) && ref_points) { - depth = ref_points[index]; + if (form1_affinity) { + depth = distance_ref_points[0]; } else { - dbg("NUMA: ibm,associativity-reference-points not found.\n"); - depth = -1; + if (distance_ref_points_depth < 2) { + printk(KERN_WARNING "NUMA: " + "short ibm,associativity-reference-points\n"); + goto err; + } + + depth = distance_ref_points[1]; } - of_node_put(rtas_root); + /* + * Warn and cap if the hardware supports more than + * MAX_DISTANCE_REF_POINTS domains. + */ + if (distance_ref_points_depth > MAX_DISTANCE_REF_POINTS) { + printk(KERN_WARNING "NUMA: distance array capped at " + "%d entries\n", MAX_DISTANCE_REF_POINTS); + distance_ref_points_depth = MAX_DISTANCE_REF_POINTS; + } + + of_node_put(rtas_root); return depth; + +err: + of_node_put(rtas_root); + return -1; } static void __init get_n_mem_cells(int *n_addr_cells, int *n_size_cells) diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c index ebc2f38..2c7e801 100644 --- a/arch/powerpc/mm/pgtable.c +++ b/arch/powerpc/mm/pgtable.c @@ -92,7 +92,6 @@ static void pte_free_rcu_callback(struct rcu_head *head) static void pte_free_submit(struct pte_freelist_batch *batch) { - INIT_RCU_HEAD(&batch->rcu); call_rcu(&batch->rcu, pte_free_rcu_callback); } diff --git a/arch/powerpc/mm/tlb_hash32.c b/arch/powerpc/mm/tlb_hash32.c index 8aaa8b7..690566b 100644 --- a/arch/powerpc/mm/tlb_hash32.c +++ b/arch/powerpc/mm/tlb_hash32.c @@ -89,17 +89,6 @@ void tlb_flush(struct mmu_gather *tlb) * -- Cort */ -/* - * 750 SMP is a Bad Idea because the 750 doesn't broadcast all - * the cache operations on the bus. Hence we need to use an IPI - * to get the other CPU(s) to invalidate their TLBs. - */ -#ifdef CONFIG_SMP_750 -#define FINISH_FLUSH smp_send_tlb_invalidate(0) -#else -#define FINISH_FLUSH do { } while (0) -#endif - static void flush_range(struct mm_struct *mm, unsigned long start, unsigned long end) { @@ -138,7 +127,6 @@ static void flush_range(struct mm_struct *mm, unsigned long start, void flush_tlb_kernel_range(unsigned long start, unsigned long end) { flush_range(&init_mm, start, end); - FINISH_FLUSH; } EXPORT_SYMBOL(flush_tlb_kernel_range); @@ -162,7 +150,6 @@ void flush_tlb_mm(struct mm_struct *mm) */ for (mp = mm->mmap; mp != NULL; mp = mp->vm_next) flush_range(mp->vm_mm, mp->vm_start, mp->vm_end); - FINISH_FLUSH; } EXPORT_SYMBOL(flush_tlb_mm); @@ -179,7 +166,6 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr) pmd = pmd_offset(pud_offset(pgd_offset(mm, vmaddr), vmaddr), vmaddr); if (!pmd_none(*pmd)) flush_hash_pages(mm->context.id, vmaddr, pmd_val(*pmd), 1); - FINISH_FLUSH; } EXPORT_SYMBOL(flush_tlb_page); @@ -192,6 +178,5 @@ void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) { flush_range(vma->vm_mm, start, end); - FINISH_FLUSH; } EXPORT_SYMBOL(flush_tlb_range); diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c index d8695b0..fe391e9 100644 --- a/arch/powerpc/mm/tlb_nohash.c +++ b/arch/powerpc/mm/tlb_nohash.c @@ -46,6 +46,7 @@ struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT] = { [MMU_PAGE_4K] = { .shift = 12, + .ind = 20, .enc = BOOK3E_PAGESZ_4K, }, [MMU_PAGE_16K] = { @@ -54,6 +55,7 @@ struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT] = { }, [MMU_PAGE_64K] = { .shift = 16, + .ind = 28, .enc = BOOK3E_PAGESZ_64K, }, [MMU_PAGE_1M] = { @@ -62,6 +64,7 @@ struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT] = { }, [MMU_PAGE_16M] = { .shift = 24, + .ind = 36, .enc = BOOK3E_PAGESZ_16M, }, [MMU_PAGE_256M] = { @@ -344,16 +347,108 @@ void tlb_flush_pgtable(struct mmu_gather *tlb, unsigned long address) } } -/* - * Early initialization of the MMU TLB code - */ -static void __early_init_mmu(int boot_cpu) +static void setup_page_sizes(void) +{ + unsigned int tlb0cfg = mfspr(SPRN_TLB0CFG); + unsigned int tlb0ps = mfspr(SPRN_TLB0PS); + unsigned int eptcfg = mfspr(SPRN_EPTCFG); + int i, psize; + + /* Look for supported direct sizes */ + for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) { + struct mmu_psize_def *def = &mmu_psize_defs[psize]; + + if (tlb0ps & (1U << (def->shift - 10))) + def->flags |= MMU_PAGE_SIZE_DIRECT; + } + + /* Indirect page sizes supported ? */ + if ((tlb0cfg & TLBnCFG_IND) == 0) + goto no_indirect; + + /* Now, we only deal with one IND page size for each + * direct size. Hopefully all implementations today are + * unambiguous, but we might want to be careful in the + * future. + */ + for (i = 0; i < 3; i++) { + unsigned int ps, sps; + + sps = eptcfg & 0x1f; + eptcfg >>= 5; + ps = eptcfg & 0x1f; + eptcfg >>= 5; + if (!ps || !sps) + continue; + for (psize = 0; psize < MMU_PAGE_COUNT; psize++) { + struct mmu_psize_def *def = &mmu_psize_defs[psize]; + + if (ps == (def->shift - 10)) + def->flags |= MMU_PAGE_SIZE_INDIRECT; + if (sps == (def->shift - 10)) + def->ind = ps + 10; + } + } + no_indirect: + + /* Cleanup array and print summary */ + pr_info("MMU: Supported page sizes\n"); + for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) { + struct mmu_psize_def *def = &mmu_psize_defs[psize]; + const char *__page_type_names[] = { + "unsupported", + "direct", + "indirect", + "direct & indirect" + }; + if (def->flags == 0) { + def->shift = 0; + continue; + } + pr_info(" %8ld KB as %s\n", 1ul << (def->shift - 10), + __page_type_names[def->flags & 0x3]); + } +} + +static void setup_mmu_htw(void) { extern unsigned int interrupt_base_book3e; extern unsigned int exc_data_tlb_miss_htw_book3e; extern unsigned int exc_instruction_tlb_miss_htw_book3e; unsigned int *ibase = &interrupt_base_book3e; + + /* Check if HW tablewalk is present, and if yes, enable it by: + * + * - patching the TLB miss handlers to branch to the + * one dedicates to it + * + * - setting the global book3e_htw_enabled + */ + unsigned int tlb0cfg = mfspr(SPRN_TLB0CFG); + + if ((tlb0cfg & TLBnCFG_IND) && + (tlb0cfg & TLBnCFG_PT)) { + /* Our exceptions vectors start with a NOP and -then- a branch + * to deal with single stepping from userspace which stops on + * the second instruction. Thus we need to patch the second + * instruction of the exception, not the first one + */ + patch_branch(ibase + (0x1c0 / 4) + 1, + (unsigned long)&exc_data_tlb_miss_htw_book3e, 0); + patch_branch(ibase + (0x1e0 / 4) + 1, + (unsigned long)&exc_instruction_tlb_miss_htw_book3e, 0); + book3e_htw_enabled = 1; + } + pr_info("MMU: Book3E Page Tables %s\n", + book3e_htw_enabled ? "Enabled" : "Disabled"); +} + +/* + * Early initialization of the MMU TLB code + */ +static void __early_init_mmu(int boot_cpu) +{ unsigned int mas4; /* XXX This will have to be decided at runtime, but right @@ -370,35 +465,17 @@ static void __early_init_mmu(int boot_cpu) */ mmu_vmemmap_psize = MMU_PAGE_16M; - /* Check if HW tablewalk is present, and if yes, enable it by: - * - * - patching the TLB miss handlers to branch to the - * one dedicates to it - * - * - setting the global book3e_htw_enabled - * - * - Set MAS4:INDD and default page size - */ - /* XXX This code only checks for TLB 0 capabilities and doesn't * check what page size combos are supported by the HW. It * also doesn't handle the case where a separate array holds * the IND entries from the array loaded by the PT. */ if (boot_cpu) { - unsigned int tlb0cfg = mfspr(SPRN_TLB0CFG); + /* Look for supported page sizes */ + setup_page_sizes(); - /* Check if HW loader is supported */ - if ((tlb0cfg & TLBnCFG_IND) && - (tlb0cfg & TLBnCFG_PT)) { - patch_branch(ibase + (0x1c0 / 4), - (unsigned long)&exc_data_tlb_miss_htw_book3e, 0); - patch_branch(ibase + (0x1e0 / 4), - (unsigned long)&exc_instruction_tlb_miss_htw_book3e, 0); - book3e_htw_enabled = 1; - } - pr_info("MMU: Book3E Page Tables %s\n", - book3e_htw_enabled ? "Enabled" : "Disabled"); + /* Look for HW tablewalk support */ + setup_mmu_htw(); } /* Set MAS4 based on page table setting */ diff --git a/arch/powerpc/oprofile/Makefile b/arch/powerpc/oprofile/Makefile index 73e1c2c..e219ca4 100644 --- a/arch/powerpc/oprofile/Makefile +++ b/arch/powerpc/oprofile/Makefile @@ -16,6 +16,6 @@ oprofile-y := $(DRIVER_OBJS) common.o backtrace.o oprofile-$(CONFIG_OPROFILE_CELL) += op_model_cell.o \ cell/spu_profiler.o cell/vma_map.o \ cell/spu_task_sync.o -oprofile-$(CONFIG_PPC64) += op_model_rs64.o op_model_power4.o op_model_pa6t.o +oprofile-$(CONFIG_PPC_BOOK3S_64) += op_model_rs64.o op_model_power4.o op_model_pa6t.o oprofile-$(CONFIG_FSL_EMB_PERFMON) += op_model_fsl_emb.o oprofile-$(CONFIG_6xx) += op_model_7450.o diff --git a/arch/powerpc/oprofile/common.c b/arch/powerpc/oprofile/common.c index 21f16ed..d65e68f 100644 --- a/arch/powerpc/oprofile/common.c +++ b/arch/powerpc/oprofile/common.c @@ -199,7 +199,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) return -ENODEV; switch (cur_cpu_spec->oprofile_type) { -#ifdef CONFIG_PPC64 +#ifdef CONFIG_PPC_BOOK3S_64 #ifdef CONFIG_OPROFILE_CELL case PPC_OPROFILE_CELL: if (firmware_has_feature(FW_FEATURE_LPAR)) diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig index ec64264..b721764 100644 --- a/arch/powerpc/platforms/40x/Kconfig +++ b/arch/powerpc/platforms/40x/Kconfig @@ -71,22 +71,6 @@ config MAKALU help This option enables support for the AMCC PPC405EX board. -#config REDWOOD_5 -# bool "Redwood-5" -# depends on 40x -# default n -# select STB03xxx -# help -# This option enables support for the IBM STB04 evaluation board. - -#config REDWOOD_6 -# bool "Redwood-6" -# depends on 40x -# default n -# select STB03xxx -# help -# This option enables support for the IBM STBx25xx evaluation board. - #config SYCAMORE # bool "Sycamore" # depends on 40x diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig index 4dac9b0..27b0651 100644 --- a/arch/powerpc/platforms/512x/Kconfig +++ b/arch/powerpc/platforms/512x/Kconfig @@ -1,32 +1,34 @@ config PPC_MPC512x - bool + bool "512x-based boards" + depends on 6xx select FSL_SOC select IPIC select PPC_CLOCK select PPC_PCI_CHOICE select FSL_PCI if PCI -config PPC_MPC5121 - bool - select PPC_MPC512x - config MPC5121_ADS bool "Freescale MPC5121E ADS" - depends on 6xx + depends on PPC_MPC512x select DEFAULT_UIMAGE - select PPC_MPC5121 select MPC5121_ADS_CPLD help This option enables support for the MPC5121E ADS board. config MPC5121_GENERIC bool "Generic support for simple MPC5121 based boards" - depends on 6xx + depends on PPC_MPC512x select DEFAULT_UIMAGE - select PPC_MPC5121 help This option enables support for simple MPC5121 based boards which do not need custom platform specific setup. Compatible boards include: Protonic LVT base boards (ZANMCU and VICVT2). + +config PDM360NG + bool "ifm PDM360NG board" + depends on PPC_MPC512x + select DEFAULT_UIMAGE + help + This option enables support for the PDM360NG board. diff --git a/arch/powerpc/platforms/512x/Makefile b/arch/powerpc/platforms/512x/Makefile index 90be2f5..4efc1c4 100644 --- a/arch/powerpc/platforms/512x/Makefile +++ b/arch/powerpc/platforms/512x/Makefile @@ -4,3 +4,4 @@ obj-y += clock.o mpc512x_shared.o obj-$(CONFIG_MPC5121_ADS) += mpc5121_ads.o mpc5121_ads_cpld.o obj-$(CONFIG_MPC5121_GENERIC) += mpc5121_generic.o +obj-$(CONFIG_PDM360NG) += pdm360ng.o diff --git a/arch/powerpc/platforms/512x/clock.c b/arch/powerpc/platforms/512x/clock.c index 4c42246..e1c5cd6 100644 --- a/arch/powerpc/platforms/512x/clock.c +++ b/arch/powerpc/platforms/512x/clock.c @@ -292,6 +292,15 @@ static void diu_clk_calc(struct clk *clk) clk->rate = rate; } +static void viu_clk_calc(struct clk *clk) +{ + unsigned long rate; + + rate = sys_clk.rate; + rate /= 2; + clk->rate = rate; +} + static void half_clk_calc(struct clk *clk) { clk->rate = clk->parent->rate / 2; @@ -412,6 +421,14 @@ static struct clk diu_clk = { .calc = diu_clk_calc, }; +static struct clk viu_clk = { + .name = "viu_clk", + .flags = CLK_HAS_CTRL, + .reg = 1, + .bit = 18, + .calc = viu_clk_calc, +}; + static struct clk axe_clk = { .name = "axe_clk", .flags = CLK_HAS_CTRL, @@ -535,6 +552,7 @@ struct clk *rate_clks[] = { &ref_clk, &sys_clk, &diu_clk, + &viu_clk, &csb_clk, &e300_clk, &ips_clk, diff --git a/arch/powerpc/platforms/512x/mpc5121_ads.c b/arch/powerpc/platforms/512x/mpc5121_ads.c index ee6ae12..dcef6ad 100644 --- a/arch/powerpc/platforms/512x/mpc5121_ads.c +++ b/arch/powerpc/platforms/512x/mpc5121_ads.c @@ -42,6 +42,7 @@ static void __init mpc5121_ads_setup_arch(void) for_each_compatible_node(np, "pci", "fsl,mpc5121-pci") mpc83xx_add_bridge(np); #endif + mpc512x_setup_diu(); } static void __init mpc5121_ads_init_IRQ(void) @@ -65,6 +66,7 @@ define_machine(mpc5121_ads) { .probe = mpc5121_ads_probe, .setup_arch = mpc5121_ads_setup_arch, .init = mpc512x_init, + .init_early = mpc512x_init_diu, .init_IRQ = mpc5121_ads_init_IRQ, .get_irq = ipic_get_irq, .calibrate_decr = generic_calibrate_decr, diff --git a/arch/powerpc/platforms/512x/mpc5121_generic.c b/arch/powerpc/platforms/512x/mpc5121_generic.c index a6c0e3a..e487eb0 100644 --- a/arch/powerpc/platforms/512x/mpc5121_generic.c +++ b/arch/powerpc/platforms/512x/mpc5121_generic.c @@ -52,6 +52,8 @@ define_machine(mpc5121_generic) { .name = "MPC5121 generic", .probe = mpc5121_generic_probe, .init = mpc512x_init, + .init_early = mpc512x_init_diu, + .setup_arch = mpc512x_setup_diu, .init_IRQ = mpc512x_init_IRQ, .get_irq = ipic_get_irq, .calibrate_decr = generic_calibrate_decr, diff --git a/arch/powerpc/platforms/512x/mpc512x.h b/arch/powerpc/platforms/512x/mpc512x.h index b2daca0..1ab6d11 100644 --- a/arch/powerpc/platforms/512x/mpc512x.h +++ b/arch/powerpc/platforms/512x/mpc512x.h @@ -16,4 +16,6 @@ extern void __init mpc512x_init(void); extern int __init mpc5121_clk_init(void); void __init mpc512x_declare_of_platform_devices(void); extern void mpc512x_restart(char *cmd); +extern void mpc512x_init_diu(void); +extern void mpc512x_setup_diu(void); #endif /* __MPC512X_H__ */ diff --git a/arch/powerpc/platforms/512x/mpc512x_shared.c b/arch/powerpc/platforms/512x/mpc512x_shared.c index 707e572..e41ebbd 100644 --- a/arch/powerpc/platforms/512x/mpc512x_shared.c +++ b/arch/powerpc/platforms/512x/mpc512x_shared.c @@ -16,7 +16,11 @@ #include <linux/io.h> #include <linux/irq.h> #include <linux/of_platform.h> +#include <linux/fsl-diu-fb.h> +#include <linux/bootmem.h> +#include <sysdev/fsl_soc.h> +#include <asm/cacheflush.h> #include <asm/machdep.h> #include <asm/ipic.h> #include <asm/prom.h> @@ -54,6 +58,286 @@ void mpc512x_restart(char *cmd) ; } +struct fsl_diu_shared_fb { + u8 gamma[0x300]; /* 32-bit aligned! */ + struct diu_ad ad0; /* 32-bit aligned! */ + phys_addr_t fb_phys; + size_t fb_len; + bool in_use; +}; + +unsigned int mpc512x_get_pixel_format(unsigned int bits_per_pixel, + int monitor_port) +{ + switch (bits_per_pixel) { + case 32: + return 0x88883316; + case 24: + return 0x88082219; + case 16: + return 0x65053118; + } + return 0x00000400; +} + +void mpc512x_set_gamma_table(int monitor_port, char *gamma_table_base) +{ +} + +void mpc512x_set_monitor_port(int monitor_port) +{ +} + +#define DIU_DIV_MASK 0x000000ff +void mpc512x_set_pixel_clock(unsigned int pixclock) +{ + unsigned long bestval, bestfreq, speed, busfreq; + unsigned long minpixclock, maxpixclock, pixval; + struct mpc512x_ccm __iomem *ccm; + struct device_node *np; + u32 temp; + long err; + int i; + + np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-clock"); + if (!np) { + pr_err("Can't find clock control module.\n"); + return; + } + + ccm = of_iomap(np, 0); + of_node_put(np); + if (!ccm) { + pr_err("Can't map clock control module reg.\n"); + return; + } + + np = of_find_node_by_type(NULL, "cpu"); + if (np) { + const unsigned int *prop = + of_get_property(np, "bus-frequency", NULL); + + of_node_put(np); + if (prop) { + busfreq = *prop; + } else { + pr_err("Can't get bus-frequency property\n"); + return; + } + } else { + pr_err("Can't find 'cpu' node.\n"); + return; + } + + /* Pixel Clock configuration */ + pr_debug("DIU: Bus Frequency = %lu\n", busfreq); + speed = busfreq * 4; /* DIU_DIV ratio is 4 * CSB_CLK / DIU_CLK */ + + /* Calculate the pixel clock with the smallest error */ + /* calculate the following in steps to avoid overflow */ + pr_debug("DIU pixclock in ps - %d\n", pixclock); + temp = (1000000000 / pixclock) * 1000; + pixclock = temp; + pr_debug("DIU pixclock freq - %u\n", pixclock); + + temp = temp / 20; /* pixclock * 0.05 */ + pr_debug("deviation = %d\n", temp); + minpixclock = pixclock - temp; + maxpixclock = pixclock + temp; + pr_debug("DIU minpixclock - %lu\n", minpixclock); + pr_debug("DIU maxpixclock - %lu\n", maxpixclock); + pixval = speed/pixclock; + pr_debug("DIU pixval = %lu\n", pixval); + + err = LONG_MAX; + bestval = pixval; + pr_debug("DIU bestval = %lu\n", bestval); + + bestfreq = 0; + for (i = -1; i <= 1; i++) { + temp = speed / (pixval+i); + pr_debug("DIU test pixval i=%d, pixval=%lu, temp freq. = %u\n", + i, pixval, temp); + if ((temp < minpixclock) || (temp > maxpixclock)) + pr_debug("DIU exceeds monitor range (%lu to %lu)\n", + minpixclock, maxpixclock); + else if (abs(temp - pixclock) < err) { + pr_debug("Entered the else if block %d\n", i); + err = abs(temp - pixclock); + bestval = pixval + i; + bestfreq = temp; + } + } + + pr_debug("DIU chose = %lx\n", bestval); + pr_debug("DIU error = %ld\n NomPixClk ", err); + pr_debug("DIU: Best Freq = %lx\n", bestfreq); + /* Modify DIU_DIV in CCM SCFR1 */ + temp = in_be32(&ccm->scfr1); + pr_debug("DIU: Current value of SCFR1: 0x%08x\n", temp); + temp &= ~DIU_DIV_MASK; + temp |= (bestval & DIU_DIV_MASK); + out_be32(&ccm->scfr1, temp); + pr_debug("DIU: Modified value of SCFR1: 0x%08x\n", temp); + iounmap(ccm); +} + +ssize_t mpc512x_show_monitor_port(int monitor_port, char *buf) +{ + return sprintf(buf, "0 - 5121 LCD\n"); +} + +int mpc512x_set_sysfs_monitor_port(int val) +{ + return 0; +} + +static struct fsl_diu_shared_fb __attribute__ ((__aligned__(8))) diu_shared_fb; + +#if defined(CONFIG_FB_FSL_DIU) || \ + defined(CONFIG_FB_FSL_DIU_MODULE) +static inline void mpc512x_free_bootmem(struct page *page) +{ + __ClearPageReserved(page); + BUG_ON(PageTail(page)); + BUG_ON(atomic_read(&page->_count) > 1); + atomic_set(&page->_count, 1); + __free_page(page); + totalram_pages++; +} + +void mpc512x_release_bootmem(void) +{ + unsigned long addr = diu_shared_fb.fb_phys & PAGE_MASK; + unsigned long size = diu_shared_fb.fb_len; + unsigned long start, end; + + if (diu_shared_fb.in_use) { + start = PFN_UP(addr); + end = PFN_DOWN(addr + size); + + for (; start < end; start++) + mpc512x_free_bootmem(pfn_to_page(start)); + + diu_shared_fb.in_use = false; + } + diu_ops.release_bootmem = NULL; +} +#endif + +/* + * Check if DIU was pre-initialized. If so, perform steps + * needed to continue displaying through the whole boot process. + * Move area descriptor and gamma table elsewhere, they are + * destroyed by bootmem allocator otherwise. The frame buffer + * address range will be reserved in setup_arch() after bootmem + * allocator is up. + */ +void __init mpc512x_init_diu(void) +{ + struct device_node *np; + struct diu __iomem *diu_reg; + phys_addr_t desc; + void __iomem *vaddr; + unsigned long mode, pix_fmt, res, bpp; + unsigned long dst; + + np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-diu"); + if (!np) { + pr_err("No DIU node\n"); + return; + } + + diu_reg = of_iomap(np, 0); + of_node_put(np); + if (!diu_reg) { + pr_err("Can't map DIU\n"); + return; + } + + mode = in_be32(&diu_reg->diu_mode); + if (mode != MFB_MODE1) { + pr_info("%s: DIU OFF\n", __func__); + goto out; + } + + desc = in_be32(&diu_reg->desc[0]); + vaddr = ioremap(desc, sizeof(struct diu_ad)); + if (!vaddr) { + pr_err("Can't map DIU area desc.\n"); + goto out; + } + memcpy(&diu_shared_fb.ad0, vaddr, sizeof(struct diu_ad)); + /* flush fb area descriptor */ + dst = (unsigned long)&diu_shared_fb.ad0; + flush_dcache_range(dst, dst + sizeof(struct diu_ad) - 1); + + res = in_be32(&diu_reg->disp_size); + pix_fmt = in_le32(vaddr); + bpp = ((pix_fmt >> 16) & 0x3) + 1; + diu_shared_fb.fb_phys = in_le32(vaddr + 4); + diu_shared_fb.fb_len = ((res & 0xfff0000) >> 16) * (res & 0xfff) * bpp; + diu_shared_fb.in_use = true; + iounmap(vaddr); + + desc = in_be32(&diu_reg->gamma); + vaddr = ioremap(desc, sizeof(diu_shared_fb.gamma)); + if (!vaddr) { + pr_err("Can't map DIU area desc.\n"); + diu_shared_fb.in_use = false; + goto out; + } + memcpy(&diu_shared_fb.gamma, vaddr, sizeof(diu_shared_fb.gamma)); + /* flush gamma table */ + dst = (unsigned long)&diu_shared_fb.gamma; + flush_dcache_range(dst, dst + sizeof(diu_shared_fb.gamma) - 1); + + iounmap(vaddr); + out_be32(&diu_reg->gamma, virt_to_phys(&diu_shared_fb.gamma)); + out_be32(&diu_reg->desc[1], 0); + out_be32(&diu_reg->desc[2], 0); + out_be32(&diu_reg->desc[0], virt_to_phys(&diu_shared_fb.ad0)); + +out: + iounmap(diu_reg); +} + +void __init mpc512x_setup_diu(void) +{ + int ret; + + /* + * We do not allocate and configure new area for bitmap buffer + * because it would requere copying bitmap data (splash image) + * and so negatively affect boot time. Instead we reserve the + * already configured frame buffer area so that it won't be + * destroyed. The starting address of the area to reserve and + * also it's length is passed to reserve_bootmem(). It will be + * freed later on first open of fbdev, when splash image is not + * needed any more. + */ + if (diu_shared_fb.in_use) { + ret = reserve_bootmem(diu_shared_fb.fb_phys, + diu_shared_fb.fb_len, + BOOTMEM_EXCLUSIVE); + if (ret) { + pr_err("%s: reserve bootmem failed\n", __func__); + diu_shared_fb.in_use = false; + } + } + +#if defined(CONFIG_FB_FSL_DIU) || \ + defined(CONFIG_FB_FSL_DIU_MODULE) + diu_ops.get_pixel_format = mpc512x_get_pixel_format; + diu_ops.set_gamma_table = mpc512x_set_gamma_table; + diu_ops.set_monitor_port = mpc512x_set_monitor_port; + diu_ops.set_pixel_clock = mpc512x_set_pixel_clock; + diu_ops.show_monitor_port = mpc512x_show_monitor_port; + diu_ops.set_sysfs_monitor_port = mpc512x_set_sysfs_monitor_port; + diu_ops.release_bootmem = mpc512x_release_bootmem; +#endif +} + void __init mpc512x_init_IRQ(void) { struct device_node *np; diff --git a/arch/powerpc/platforms/512x/pdm360ng.c b/arch/powerpc/platforms/512x/pdm360ng.c new file mode 100644 index 0000000..0575e85 --- /dev/null +++ b/arch/powerpc/platforms/512x/pdm360ng.c @@ -0,0 +1,129 @@ +/* + * Copyright (C) 2010 DENX Software Engineering + * + * Anatolij Gustschin, <agust@denx.de> + * + * PDM360NG board setup + * + * This is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/of_platform.h> + +#include <asm/machdep.h> +#include <asm/ipic.h> + +#include "mpc512x.h" + +#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ + defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) +#include <linux/interrupt.h> +#include <linux/spi/ads7846.h> +#include <linux/spi/spi.h> +#include <linux/notifier.h> + +static void *pdm360ng_gpio_base; + +static int pdm360ng_get_pendown_state(void) +{ + u32 reg; + + reg = in_be32(pdm360ng_gpio_base + 0xc); + if (reg & 0x40) + setbits32(pdm360ng_gpio_base + 0xc, 0x40); + + reg = in_be32(pdm360ng_gpio_base + 0x8); + + /* return 1 if pen is down */ + return (reg & 0x40) == 0; +} + +static struct ads7846_platform_data pdm360ng_ads7846_pdata = { + .model = 7845, + .get_pendown_state = pdm360ng_get_pendown_state, + .irq_flags = IRQF_TRIGGER_LOW, +}; + +static int __init pdm360ng_penirq_init(void) +{ + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-gpio"); + if (!np) { + pr_err("%s: Can't find 'mpc5121-gpio' node\n", __func__); + return -ENODEV; + } + + pdm360ng_gpio_base = of_iomap(np, 0); + of_node_put(np); + if (!pdm360ng_gpio_base) { + pr_err("%s: Can't map gpio regs.\n", __func__); + return -ENODEV; + } + out_be32(pdm360ng_gpio_base + 0xc, 0xffffffff); + setbits32(pdm360ng_gpio_base + 0x18, 0x2000); + setbits32(pdm360ng_gpio_base + 0x10, 0x40); + + return 0; +} + +static int pdm360ng_touchscreen_notifier_call(struct notifier_block *nb, + unsigned long event, void *__dev) +{ + struct device *dev = __dev; + + if ((event == BUS_NOTIFY_ADD_DEVICE) && + of_device_is_compatible(dev->of_node, "ti,ads7846")) { + dev->platform_data = &pdm360ng_ads7846_pdata; + return NOTIFY_OK; + } + return NOTIFY_DONE; +} + +static struct notifier_block pdm360ng_touchscreen_nb = { + .notifier_call = pdm360ng_touchscreen_notifier_call, +}; + +static void __init pdm360ng_touchscreen_init(void) +{ + if (pdm360ng_penirq_init()) + return; + + bus_register_notifier(&spi_bus_type, &pdm360ng_touchscreen_nb); +} +#else +static inline void __init pdm360ng_touchscreen_init(void) +{ +} +#endif /* CONFIG_TOUCHSCREEN_ADS7846 */ + +void __init pdm360ng_init(void) +{ + mpc512x_init(); + pdm360ng_touchscreen_init(); +} + +static int __init pdm360ng_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "ifm,pdm360ng"); +} + +define_machine(pdm360ng) { + .name = "PDM360NG", + .probe = pdm360ng_probe, + .setup_arch = mpc512x_setup_diu, + .init = pdm360ng_init, + .init_early = mpc512x_init_diu, + .init_IRQ = mpc512x_init_IRQ, + .get_irq = ipic_get_irq, + .calibrate_decr = generic_calibrate_decr, + .restart = mpc512x_restart, +}; diff --git a/arch/powerpc/platforms/52xx/lite5200_pm.c b/arch/powerpc/platforms/52xx/lite5200_pm.c index b5c753d..80234e5 100644 --- a/arch/powerpc/platforms/52xx/lite5200_pm.c +++ b/arch/powerpc/platforms/52xx/lite5200_pm.c @@ -216,9 +216,6 @@ static int lite5200_pm_enter(suspend_state_t state) lite5200_restore_regs(); - /* restart jiffies */ - wakeup_decrementer(); - iounmap(mbar); return 0; } diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pm.c b/arch/powerpc/platforms/52xx/mpc52xx_pm.c index 7672253..568cef6 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_pm.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_pm.c @@ -171,9 +171,6 @@ int mpc52xx_pm_enter(suspend_state_t state) /* restore SRAM */ memcpy(sram, saved_sram, sram_size); - /* restart jiffies */ - wakeup_decrementer(); - /* reenable interrupts in PIC */ out_be32(&intr->main_mask, intr_main_mask); diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig index f49a254..021763a 100644 --- a/arch/powerpc/platforms/83xx/Kconfig +++ b/arch/powerpc/platforms/83xx/Kconfig @@ -9,6 +9,14 @@ menuconfig PPC_83xx if PPC_83xx +config MPC830x_RDB + bool "Freescale MPC830x RDB" + select DEFAULT_UIMAGE + select PPC_MPC831x + select FSL_GTM + help + This option enables support for the MPC8308 RDB board. + config MPC831x_RDB bool "Freescale MPC831x RDB" select DEFAULT_UIMAGE diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile index e139c36..6e8bbbb 100644 --- a/arch/powerpc/platforms/83xx/Makefile +++ b/arch/powerpc/platforms/83xx/Makefile @@ -4,6 +4,7 @@ obj-y := misc.o usb.o obj-$(CONFIG_SUSPEND) += suspend.o suspend-asm.o obj-$(CONFIG_MCU_MPC8349EMITX) += mcu_mpc8349emitx.o +obj-$(CONFIG_MPC830x_RDB) += mpc830x_rdb.o obj-$(CONFIG_MPC831x_RDB) += mpc831x_rdb.o obj-$(CONFIG_MPC832x_RDB) += mpc832x_rdb.o obj-$(CONFIG_MPC834x_MDS) += mpc834x_mds.o diff --git a/arch/powerpc/platforms/83xx/mpc830x_rdb.c b/arch/powerpc/platforms/83xx/mpc830x_rdb.c new file mode 100644 index 0000000..ac102ee --- /dev/null +++ b/arch/powerpc/platforms/83xx/mpc830x_rdb.c @@ -0,0 +1,94 @@ +/* + * arch/powerpc/platforms/83xx/mpc830x_rdb.c + * + * Description: MPC830x RDB board specific routines. + * This file is based on mpc831x_rdb.c + * + * Copyright (C) Freescale Semiconductor, Inc. 2009. All rights reserved. + * Copyright (C) 2010. Ilya Yanok, Emcraft Systems, yanok@emcraft.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/pci.h> +#include <linux/of_platform.h> +#include <asm/time.h> +#include <asm/ipic.h> +#include <asm/udbg.h> +#include <sysdev/fsl_pci.h> +#include <sysdev/fsl_soc.h> +#include "mpc83xx.h" + +/* + * Setup the architecture + */ +static void __init mpc830x_rdb_setup_arch(void) +{ +#ifdef CONFIG_PCI + struct device_node *np; +#endif + + if (ppc_md.progress) + ppc_md.progress("mpc830x_rdb_setup_arch()", 0); + +#ifdef CONFIG_PCI + for_each_compatible_node(np, "pci", "fsl,mpc8308-pcie") + mpc83xx_add_bridge(np); +#endif + mpc831x_usb_cfg(); +} + +static void __init mpc830x_rdb_init_IRQ(void) +{ + struct device_node *np; + + np = of_find_node_by_type(NULL, "ipic"); + if (!np) + return; + + ipic_init(np, 0); + + /* Initialize the default interrupt mapping priorities, + * in case the boot rom changed something on us. + */ + ipic_set_default_priority(); +} + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init mpc830x_rdb_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "MPC8308RDB") || + of_flat_dt_is_compatible(root, "fsl,mpc8308rdb"); +} + +static struct of_device_id __initdata of_bus_ids[] = { + { .compatible = "simple-bus" }, + { .compatible = "gianfar" }, + {}, +}; + +static int __init declare_of_platform_devices(void) +{ + of_platform_bus_probe(NULL, of_bus_ids, NULL); + return 0; +} +machine_device_initcall(mpc830x_rdb, declare_of_platform_devices); + +define_machine(mpc830x_rdb) { + .name = "MPC830x RDB", + .probe = mpc830x_rdb_probe, + .setup_arch = mpc830x_rdb_setup_arch, + .init_IRQ = mpc830x_rdb_init_IRQ, + .get_irq = ipic_get_irq, + .restart = mpc83xx_restart, + .time_init = mpc83xx_time_init, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 3a2ade2..bea1f59 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -65,6 +65,14 @@ config MPC85xx_RDB help This option enables support for the MPC85xx RDB (P2020 RDB) board +config P1022_DS + bool "Freescale P1022 DS" + select DEFAULT_UIMAGE + select CONFIG_PHYS_64BIT # The DTS has 36-bit addresses + select SWIOTLB + help + This option enables support for the Freescale P1022DS reference board. + config SOCRATES bool "Socrates" select DEFAULT_UIMAGE diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index 387c128..a2ec3f8 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_MPC8536_DS) += mpc8536_ds.o obj-$(CONFIG_MPC85xx_DS) += mpc85xx_ds.o obj-$(CONFIG_MPC85xx_MDS) += mpc85xx_mds.o obj-$(CONFIG_MPC85xx_RDB) += mpc85xx_rdb.o +obj-$(CONFIG_P1022_DS) += p1022_ds.o obj-$(CONFIG_P4080_DS) += p4080_ds.o corenet_ds.o obj-$(CONFIG_STX_GP3) += stx_gp3.o obj-$(CONFIG_TQM85xx) += tqm85xx.o diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index 4945136..da64be1 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -158,51 +158,108 @@ static int mpc8568_mds_phy_fixups(struct phy_device *phydev) extern void __init mpc85xx_smp_init(void); #endif -static void __init mpc85xx_mds_setup_arch(void) +#ifdef CONFIG_QUICC_ENGINE +static struct of_device_id mpc85xx_qe_ids[] __initdata = { + { .type = "qe", }, + { .compatible = "fsl,qe", }, + { }, +}; + +static void __init mpc85xx_publish_qe_devices(void) { struct device_node *np; - static u8 __iomem *bcsr_regs = NULL; -#ifdef CONFIG_PCI - struct pci_controller *hose; -#endif - dma_addr_t max = 0xffffffff; - if (ppc_md.progress) - ppc_md.progress("mpc85xx_mds_setup_arch()", 0); + np = of_find_compatible_node(NULL, NULL, "fsl,qe"); + if (!of_device_is_available(np)) { + of_node_put(np); + return; + } + + of_platform_bus_probe(NULL, mpc85xx_qe_ids, NULL); +} + +static void __init mpc85xx_mds_reset_ucc_phys(void) +{ + struct device_node *np; + static u8 __iomem *bcsr_regs; /* Map BCSR area */ np = of_find_node_by_name(NULL, "bcsr"); - if (np != NULL) { - struct resource res; + if (!np) + return; - of_address_to_resource(np, 0, &res); - bcsr_regs = ioremap(res.start, res.end - res.start +1); - of_node_put(np); - } + bcsr_regs = of_iomap(np, 0); + of_node_put(np); + if (!bcsr_regs) + return; -#ifdef CONFIG_PCI - for_each_node_by_type(np, "pci") { - if (of_device_is_compatible(np, "fsl,mpc8540-pci") || - of_device_is_compatible(np, "fsl,mpc8548-pcie")) { - struct resource rsrc; - of_address_to_resource(np, 0, &rsrc); - if ((rsrc.start & 0xfffff) == 0x8000) - fsl_add_bridge(np, 1); - else - fsl_add_bridge(np, 0); + if (machine_is(mpc8568_mds)) { +#define BCSR_UCC1_GETH_EN (0x1 << 7) +#define BCSR_UCC2_GETH_EN (0x1 << 7) +#define BCSR_UCC1_MODE_MSK (0x3 << 4) +#define BCSR_UCC2_MODE_MSK (0x3 << 0) - hose = pci_find_hose_for_OF_device(np); - max = min(max, hose->dma_window_base_cur + - hose->dma_window_size); + /* Turn off UCC1 & UCC2 */ + clrbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN); + clrbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN); + + /* Mode is RGMII, all bits clear */ + clrbits8(&bcsr_regs[11], BCSR_UCC1_MODE_MSK | + BCSR_UCC2_MODE_MSK); + + /* Turn UCC1 & UCC2 on */ + setbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN); + setbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN); + } else if (machine_is(mpc8569_mds)) { +#define BCSR7_UCC12_GETHnRST (0x1 << 2) +#define BCSR8_UEM_MARVELL_RST (0x1 << 1) +#define BCSR_UCC_RGMII (0x1 << 6) +#define BCSR_UCC_RTBI (0x1 << 5) + /* + * U-Boot mangles interrupt polarity for Marvell PHYs, + * so reset built-in and UEM Marvell PHYs, this puts + * the PHYs into their normal state. + */ + clrbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST); + setbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST); + + setbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST); + clrbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST); + + for (np = NULL; (np = of_find_compatible_node(np, + "network", + "ucc_geth")) != NULL;) { + const unsigned int *prop; + int ucc_num; + + prop = of_get_property(np, "cell-index", NULL); + if (prop == NULL) + continue; + + ucc_num = *prop - 1; + + prop = of_get_property(np, "phy-connection-type", NULL); + if (prop == NULL) + continue; + + if (strcmp("rtbi", (const char *)prop) == 0) + clrsetbits_8(&bcsr_regs[7 + ucc_num], + BCSR_UCC_RGMII, BCSR_UCC_RTBI); } + } else if (machine_is(p1021_mds)) { +#define BCSR11_ENET_MICRST (0x1 << 5) + /* Reset Micrel PHY */ + clrbits8(&bcsr_regs[11], BCSR11_ENET_MICRST); + setbits8(&bcsr_regs[11], BCSR11_ENET_MICRST); } -#endif -#ifdef CONFIG_SMP - mpc85xx_smp_init(); -#endif + iounmap(bcsr_regs); +} + +static void __init mpc85xx_mds_qe_init(void) +{ + struct device_node *np; -#ifdef CONFIG_QUICC_ENGINE np = of_find_compatible_node(NULL, NULL, "fsl,qe"); if (!np) { np = of_find_node_by_name(NULL, "qe"); @@ -210,6 +267,11 @@ static void __init mpc85xx_mds_setup_arch(void) return; } + if (!of_device_is_available(np)) { + of_node_put(np); + return; + } + qe_reset(); of_node_put(np); @@ -224,70 +286,7 @@ static void __init mpc85xx_mds_setup_arch(void) par_io_of_config(ucc); } - if (bcsr_regs) { - if (machine_is(mpc8568_mds)) { -#define BCSR_UCC1_GETH_EN (0x1 << 7) -#define BCSR_UCC2_GETH_EN (0x1 << 7) -#define BCSR_UCC1_MODE_MSK (0x3 << 4) -#define BCSR_UCC2_MODE_MSK (0x3 << 0) - - /* Turn off UCC1 & UCC2 */ - clrbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN); - clrbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN); - - /* Mode is RGMII, all bits clear */ - clrbits8(&bcsr_regs[11], BCSR_UCC1_MODE_MSK | - BCSR_UCC2_MODE_MSK); - - /* Turn UCC1 & UCC2 on */ - setbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN); - setbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN); - } else if (machine_is(mpc8569_mds)) { -#define BCSR7_UCC12_GETHnRST (0x1 << 2) -#define BCSR8_UEM_MARVELL_RST (0x1 << 1) -#define BCSR_UCC_RGMII (0x1 << 6) -#define BCSR_UCC_RTBI (0x1 << 5) - /* - * U-Boot mangles interrupt polarity for Marvell PHYs, - * so reset built-in and UEM Marvell PHYs, this puts - * the PHYs into their normal state. - */ - clrbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST); - setbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST); - - setbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST); - clrbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST); - - for (np = NULL; (np = of_find_compatible_node(np, - "network", - "ucc_geth")) != NULL;) { - const unsigned int *prop; - int ucc_num; - - prop = of_get_property(np, "cell-index", NULL); - if (prop == NULL) - continue; - - ucc_num = *prop - 1; - - prop = of_get_property(np, "phy-connection-type", NULL); - if (prop == NULL) - continue; - - if (strcmp("rtbi", (const char *)prop) == 0) - clrsetbits_8(&bcsr_regs[7 + ucc_num], - BCSR_UCC_RGMII, BCSR_UCC_RTBI); - } - - } else if (machine_is(p1021_mds)) { -#define BCSR11_ENET_MICRST (0x1 << 5) - /* Reset Micrel PHY */ - clrbits8(&bcsr_regs[11], BCSR11_ENET_MICRST); - setbits8(&bcsr_regs[11], BCSR11_ENET_MICRST); - } - - iounmap(bcsr_regs); - } + mpc85xx_mds_reset_ucc_phys(); if (machine_is(p1021_mds)) { #define MPC85xx_PMUXCR_OFFSET 0x60 @@ -322,8 +321,72 @@ static void __init mpc85xx_mds_setup_arch(void) } } +} + +static void __init mpc85xx_mds_qeic_init(void) +{ + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "fsl,qe"); + if (!of_device_is_available(np)) { + of_node_put(np); + return; + } + + np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic"); + if (!np) { + np = of_find_node_by_type(NULL, "qeic"); + if (!np) + return; + } + + if (machine_is(p1021_mds)) + qe_ic_init(np, 0, qe_ic_cascade_low_mpic, + qe_ic_cascade_high_mpic); + else + qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL); + of_node_put(np); +} +#else +static void __init mpc85xx_publish_qe_devices(void) { } +static void __init mpc85xx_mds_qe_init(void) { } +static void __init mpc85xx_mds_qeic_init(void) { } #endif /* CONFIG_QUICC_ENGINE */ +static void __init mpc85xx_mds_setup_arch(void) +{ +#ifdef CONFIG_PCI + struct pci_controller *hose; +#endif + dma_addr_t max = 0xffffffff; + + if (ppc_md.progress) + ppc_md.progress("mpc85xx_mds_setup_arch()", 0); + +#ifdef CONFIG_PCI + for_each_node_by_type(np, "pci") { + if (of_device_is_compatible(np, "fsl,mpc8540-pci") || + of_device_is_compatible(np, "fsl,mpc8548-pcie")) { + struct resource rsrc; + of_address_to_resource(np, 0, &rsrc); + if ((rsrc.start & 0xfffff) == 0x8000) + fsl_add_bridge(np, 1); + else + fsl_add_bridge(np, 0); + + hose = pci_find_hose_for_OF_device(np); + max = min(max, hose->dma_window_base_cur + + hose->dma_window_size); + } + } +#endif + +#ifdef CONFIG_SMP + mpc85xx_smp_init(); +#endif + + mpc85xx_mds_qe_init(); + #ifdef CONFIG_SWIOTLB if (memblock_end_of_DRAM() > max) { ppc_swiotlb_enable = 1; @@ -369,8 +432,6 @@ static struct of_device_id mpc85xx_ids[] = { { .type = "soc", }, { .compatible = "soc", }, { .compatible = "simple-bus", }, - { .type = "qe", }, - { .compatible = "fsl,qe", }, { .compatible = "gianfar", }, { .compatible = "fsl,rapidio-delta", }, { .compatible = "fsl,mpc8548-guts", }, @@ -382,8 +443,6 @@ static struct of_device_id p1021_ids[] = { { .type = "soc", }, { .compatible = "soc", }, { .compatible = "simple-bus", }, - { .type = "qe", }, - { .compatible = "fsl,qe", }, { .compatible = "gianfar", }, {}, }; @@ -395,16 +454,16 @@ static int __init mpc85xx_publish_devices(void) if (machine_is(mpc8569_mds)) simple_gpiochip_init("fsl,mpc8569mds-bcsr-gpio"); - /* Publish the QE devices */ of_platform_bus_probe(NULL, mpc85xx_ids, NULL); + mpc85xx_publish_qe_devices(); return 0; } static int __init p1021_publish_devices(void) { - /* Publish the QE devices */ of_platform_bus_probe(NULL, p1021_ids, NULL); + mpc85xx_publish_qe_devices(); return 0; } @@ -441,21 +500,7 @@ static void __init mpc85xx_mds_pic_init(void) of_node_put(np); mpic_init(mpic); - -#ifdef CONFIG_QUICC_ENGINE - np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic"); - if (!np) { - np = of_find_node_by_type(NULL, "qeic"); - if (!np) - return; - } - if (machine_is(p1021_mds)) - qe_ic_init(np, 0, qe_ic_cascade_low_mpic, - qe_ic_cascade_high_mpic); - else - qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL); - of_node_put(np); -#endif /* CONFIG_QUICC_ENGINE */ + mpc85xx_mds_qeic_init(); } static int __init mpc85xx_mds_probe(void) diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c new file mode 100644 index 0000000..e1467c9 --- /dev/null +++ b/arch/powerpc/platforms/85xx/p1022_ds.c @@ -0,0 +1,148 @@ +/* + * P1022DS board specific routines + * + * Authors: Travis Wheatley <travis.wheatley@freescale.com> + * Dave Liu <daveliu@freescale.com> + * Timur Tabi <timur@freescale.com> + * + * Copyright 2010 Freescale Semiconductor, Inc. + * + * This file is taken from the Freescale P1022DS BSP, with modifications: + * 1) No DIU support (pending rewrite of DIU code) + * 2) No AMP support + * 3) No PCI endpoint support + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <linux/pci.h> +#include <linux/of_platform.h> +#include <linux/lmb.h> + +#include <asm/mpic.h> +#include <asm/swiotlb.h> + +#include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> + +void __init p1022_ds_pic_init(void) +{ + struct mpic *mpic; + struct resource r; + struct device_node *np; + + np = of_find_node_by_type(NULL, "open-pic"); + if (!np) { + pr_err("Could not find open-pic node\n"); + return; + } + + if (of_address_to_resource(np, 0, &r)) { + pr_err("Failed to map mpic register space\n"); + of_node_put(np); + return; + } + + mpic = mpic_alloc(np, r.start, + MPIC_PRIMARY | MPIC_WANTS_RESET | + MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS | + MPIC_SINGLE_DEST_CPU, + 0, 256, " OpenPIC "); + + BUG_ON(mpic == NULL); + of_node_put(np); + + mpic_init(mpic); +} + +#ifdef CONFIG_SMP +void __init mpc85xx_smp_init(void); +#endif + +/* + * Setup the architecture + */ +static void __init p1022_ds_setup_arch(void) +{ +#ifdef CONFIG_PCI + struct device_node *np; +#endif + dma_addr_t max = 0xffffffff; + + if (ppc_md.progress) + ppc_md.progress("p1022_ds_setup_arch()", 0); + +#ifdef CONFIG_PCI + for_each_compatible_node(np, "pci", "fsl,p1022-pcie") { + struct resource rsrc; + struct pci_controller *hose; + + of_address_to_resource(np, 0, &rsrc); + + if ((rsrc.start & 0xfffff) == 0x8000) + fsl_add_bridge(np, 1); + else + fsl_add_bridge(np, 0); + + hose = pci_find_hose_for_OF_device(np); + max = min(max, hose->dma_window_base_cur + + hose->dma_window_size); + } +#endif + +#ifdef CONFIG_SMP + mpc85xx_smp_init(); +#endif + +#ifdef CONFIG_SWIOTLB + if (lmb_end_of_DRAM() > max) { + ppc_swiotlb_enable = 1; + set_pci_dma_ops(&swiotlb_dma_ops); + ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb; + } +#endif + + pr_info("Freescale P1022 DS reference board\n"); +} + +static struct of_device_id __initdata p1022_ds_ids[] = { + { .type = "soc", }, + { .compatible = "soc", }, + { .compatible = "simple-bus", }, + { .compatible = "gianfar", }, + {}, +}; + +static int __init p1022_ds_publish_devices(void) +{ + return of_platform_bus_probe(NULL, p1022_ds_ids, NULL); +} +machine_device_initcall(p1022_ds, p1022_ds_publish_devices); + +machine_arch_initcall(p1022_ds, swiotlb_setup_bus_notifier); + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init p1022_ds_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "fsl,p1022ds"); +} + +define_machine(p1022_ds) { + .name = "P1022 DS", + .probe = p1022_ds_probe, + .setup_arch = p1022_ds_setup_arch, + .init_IRQ = p1022_ds_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c index a15f582..a6b1065 100644 --- a/arch/powerpc/platforms/85xx/smp.c +++ b/arch/powerpc/platforms/85xx/smp.c @@ -15,6 +15,7 @@ #include <linux/init.h> #include <linux/delay.h> #include <linux/of.h> +#include <linux/kexec.h> #include <asm/machdep.h> #include <asm/pgtable.h> @@ -24,6 +25,7 @@ #include <asm/dbell.h> #include <sysdev/fsl_soc.h> +#include <sysdev/mpic.h> extern void __early_start(void); @@ -99,12 +101,70 @@ static void __init smp_85xx_setup_cpu(int cpu_nr) { mpic_setup_this_cpu(); + if (cpu_has_feature(CPU_FTR_DBELL)) + doorbell_setup_this_cpu(); } struct smp_ops_t smp_85xx_ops = { .kick_cpu = smp_85xx_kick_cpu, +#ifdef CONFIG_KEXEC + .give_timebase = smp_generic_give_timebase, + .take_timebase = smp_generic_take_timebase, +#endif }; +#ifdef CONFIG_KEXEC +static int kexec_down_cpus = 0; + +void mpc85xx_smp_kexec_cpu_down(int crash_shutdown, int secondary) +{ + mpic_teardown_this_cpu(1); + + /* When crashing, this gets called on all CPU's we only + * take down the non-boot cpus */ + if (smp_processor_id() != boot_cpuid) + { + local_irq_disable(); + kexec_down_cpus++; + + while (1); + } +} + +static void mpc85xx_smp_kexec_down(void *arg) +{ + if (ppc_md.kexec_cpu_down) + ppc_md.kexec_cpu_down(0,1); +} + +static void mpc85xx_smp_machine_kexec(struct kimage *image) +{ + int timeout = 2000; + int i; + + set_cpus_allowed(current, cpumask_of_cpu(boot_cpuid)); + + smp_call_function(mpc85xx_smp_kexec_down, NULL, 0); + + while ( (kexec_down_cpus != (num_online_cpus() - 1)) && + ( timeout > 0 ) ) + { + timeout--; + } + + if ( !timeout ) + printk(KERN_ERR "Unable to bring down secondary cpu(s)"); + + for (i = 0; i < num_present_cpus(); i++) + { + if ( i == smp_processor_id() ) continue; + mpic_reset_core(i); + } + + default_machine_kexec(image); +} +#endif /* CONFIG_KEXEC */ + void __init mpc85xx_smp_init(void) { struct device_node *np; @@ -117,9 +177,14 @@ void __init mpc85xx_smp_init(void) } if (cpu_has_feature(CPU_FTR_DBELL)) - smp_85xx_ops.message_pass = smp_dbell_message_pass; + smp_85xx_ops.message_pass = doorbell_message_pass; BUG_ON(!smp_85xx_ops.message_pass); smp_ops = &smp_85xx_ops; + +#ifdef CONFIG_KEXEC + ppc_md.kexec_cpu_down = mpc85xx_smp_kexec_cpu_down; + ppc_md.machine_kexec = mpc85xx_smp_machine_kexec; +#endif } diff --git a/arch/powerpc/platforms/85xx/tqm85xx.c b/arch/powerpc/platforms/85xx/tqm85xx.c index 5b0ab99..8f29bbc 100644 --- a/arch/powerpc/platforms/85xx/tqm85xx.c +++ b/arch/powerpc/platforms/85xx/tqm85xx.c @@ -151,6 +151,27 @@ static void tqm85xx_show_cpuinfo(struct seq_file *m) seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); } +static void __init tqm85xx_ti1520_fixup(struct pci_dev *pdev) +{ + unsigned int val; + + /* Do not do the fixup on other platforms! */ + if (!machine_is(tqm85xx)) + return; + + dev_info(&pdev->dev, "Using TI 1520 fixup on TQM85xx\n"); + + /* + * Enable P2CCLK bit in system control register + * to enable CLOCK output to power chip + */ + pci_read_config_dword(pdev, 0x80, &val); + pci_write_config_dword(pdev, 0x80, val | (1 << 27)); + +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1520, + tqm85xx_ti1520_fixup); + static struct of_device_id __initdata of_bus_ids[] = { { .compatible = "simple-bus", }, { .compatible = "gianfar", }, diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig index 48a920a..dd35ce0 100644 --- a/arch/powerpc/platforms/8xx/Kconfig +++ b/arch/powerpc/platforms/8xx/Kconfig @@ -55,6 +55,12 @@ config PPC_MGSUVD help This enables support for the Keymile MGSUVD board. +config TQM8XX + bool "TQM8XX" + select CPM1 + help + support for the mpc8xx based boards from TQM. + endchoice menu "Freescale Ethernet driver platform-specific options" diff --git a/arch/powerpc/platforms/8xx/Makefile b/arch/powerpc/platforms/8xx/Makefile index bdbfd74..a491fe6 100644 --- a/arch/powerpc/platforms/8xx/Makefile +++ b/arch/powerpc/platforms/8xx/Makefile @@ -7,3 +7,4 @@ obj-$(CONFIG_MPC86XADS) += mpc86xads_setup.o obj-$(CONFIG_PPC_EP88XC) += ep88xc.o obj-$(CONFIG_PPC_ADDER875) += adder875.o obj-$(CONFIG_PPC_MGSUVD) += mgsuvd.o +obj-$(CONFIG_TQM8XX) += tqm8xx_setup.o diff --git a/arch/powerpc/platforms/8xx/tqm8xx_setup.c b/arch/powerpc/platforms/8xx/tqm8xx_setup.c new file mode 100644 index 0000000..b71c650 --- /dev/null +++ b/arch/powerpc/platforms/8xx/tqm8xx_setup.c @@ -0,0 +1,156 @@ +/* + * Platform setup for the MPC8xx based boards from TQM. + * + * Heiko Schocher <hs@denx.de> + * Copyright 2010 DENX Software Engineering GmbH + * + * based on: + * Vitaly Bordug <vbordug@ru.mvista.com> + * + * Copyright 2005 MontaVista Software Inc. + * + * Heavily modified by Scott Wood <scottwood@freescale.com> + * Copyright 2007 Freescale Semiconductor, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/param.h> +#include <linux/string.h> +#include <linux/ioport.h> +#include <linux/device.h> +#include <linux/delay.h> + +#include <linux/fs_enet_pd.h> +#include <linux/fs_uart_pd.h> +#include <linux/fsl_devices.h> +#include <linux/mii.h> +#include <linux/of_platform.h> + +#include <asm/delay.h> +#include <asm/io.h> +#include <asm/machdep.h> +#include <asm/page.h> +#include <asm/processor.h> +#include <asm/system.h> +#include <asm/time.h> +#include <asm/mpc8xx.h> +#include <asm/8xx_immap.h> +#include <asm/cpm1.h> +#include <asm/fs_pd.h> +#include <asm/udbg.h> + +#include "mpc8xx.h" + +struct cpm_pin { + int port, pin, flags; +}; + +static struct __initdata cpm_pin tqm8xx_pins[] = { + /* SMC1 */ + {CPM_PORTB, 24, CPM_PIN_INPUT}, /* RX */ + {CPM_PORTB, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */ + + /* SCC1 */ + {CPM_PORTA, 5, CPM_PIN_INPUT}, /* CLK1 */ + {CPM_PORTA, 7, CPM_PIN_INPUT}, /* CLK2 */ + {CPM_PORTA, 14, CPM_PIN_INPUT}, /* TX */ + {CPM_PORTA, 15, CPM_PIN_INPUT}, /* RX */ + {CPM_PORTC, 15, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TENA */ + {CPM_PORTC, 10, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, + {CPM_PORTC, 11, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, +}; + +static struct __initdata cpm_pin tqm8xx_fec_pins[] = { + /* MII */ + {CPM_PORTD, 3, CPM_PIN_OUTPUT}, + {CPM_PORTD, 4, CPM_PIN_OUTPUT}, + {CPM_PORTD, 5, CPM_PIN_OUTPUT}, + {CPM_PORTD, 6, CPM_PIN_OUTPUT}, + {CPM_PORTD, 7, CPM_PIN_OUTPUT}, + {CPM_PORTD, 8, CPM_PIN_OUTPUT}, + {CPM_PORTD, 9, CPM_PIN_OUTPUT}, + {CPM_PORTD, 10, CPM_PIN_OUTPUT}, + {CPM_PORTD, 11, CPM_PIN_OUTPUT}, + {CPM_PORTD, 12, CPM_PIN_OUTPUT}, + {CPM_PORTD, 13, CPM_PIN_OUTPUT}, + {CPM_PORTD, 14, CPM_PIN_OUTPUT}, + {CPM_PORTD, 15, CPM_PIN_OUTPUT}, +}; + +static void __init init_pins(int n, struct cpm_pin *pin) +{ + int i; + + for (i = 0; i < n; i++) { + cpm1_set_pin(pin->port, pin->pin, pin->flags); + pin++; + } +} + +static void __init init_ioports(void) +{ + struct device_node *dnode; + struct property *prop; + int len; + + init_pins(ARRAY_SIZE(tqm8xx_pins), &tqm8xx_pins[0]); + + cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX); + + dnode = of_find_node_by_name(NULL, "aliases"); + if (dnode == NULL) + return; + prop = of_find_property(dnode, "ethernet1", &len); + if (prop == NULL) + return; + + /* init FEC pins */ + init_pins(ARRAY_SIZE(tqm8xx_fec_pins), &tqm8xx_fec_pins[0]); +} + +static void __init tqm8xx_setup_arch(void) +{ + cpm_reset(); + init_ioports(); +} + +static int __init tqm8xx_probe(void) +{ + unsigned long node = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(node, "tqc,tqm8xx"); +} + +static struct of_device_id __initdata of_bus_ids[] = { + { .name = "soc", }, + { .name = "cpm", }, + { .name = "localbus", }, + { .compatible = "simple-bus" }, + {}, +}; + +static int __init declare_of_platform_devices(void) +{ + of_platform_bus_probe(NULL, of_bus_ids, NULL); + + return 0; +} +machine_device_initcall(tqm8xx, declare_of_platform_devices); + +define_machine(tqm8xx) { + .name = "TQM8xx", + .probe = tqm8xx_probe, + .setup_arch = tqm8xx_setup_arch, + .init_IRQ = mpc8xx_pics_init, + .get_irq = mpc8xx_get_irq, + .restart = mpc8xx_restart, + .calibrate_decr = mpc8xx_calibrate_decr, + .set_rtc_time = mpc8xx_set_rtc_time, + .get_rtc_time = mpc8xx_get_rtc_time, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/iseries/vio.c b/arch/powerpc/platforms/iseries/vio.c index 00b6730..b6db7ce 100644 --- a/arch/powerpc/platforms/iseries/vio.c +++ b/arch/powerpc/platforms/iseries/vio.c @@ -87,12 +87,11 @@ static struct device_node *new_node(const char *path, if (!np) return NULL; - np->full_name = kmalloc(strlen(path) + 1, GFP_KERNEL); + np->full_name = kstrdup(path, GFP_KERNEL); if (!np->full_name) { kfree(np); return NULL; } - strcpy(np->full_name, path); of_node_set_flag(np, OF_DYNAMIC); kref_init(&np->kref); np->parent = of_node_get(parent); diff --git a/arch/powerpc/platforms/powermac/cpufreq_32.c b/arch/powerpc/platforms/powermac/cpufreq_32.c index 1e9eba1..415ca6d 100644 --- a/arch/powerpc/platforms/powermac/cpufreq_32.c +++ b/arch/powerpc/platforms/powermac/cpufreq_32.c @@ -310,8 +310,12 @@ static int pmu_set_cpu_speed(int low_speed) /* Restore low level PMU operations */ pmu_unlock(); - /* Restore decrementer */ - wakeup_decrementer(); + /* + * Restore decrementer; we'll take a decrementer interrupt + * as soon as interrupts are re-enabled and the generic + * clockevents code will reprogram it with the right value. + */ + set_dec(1); /* Restore interrupts */ mpic_cpu_set_priority(pic_prio); diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c index 9e1b9fd..79bd3e8 100644 --- a/arch/powerpc/platforms/powermac/feature.c +++ b/arch/powerpc/platforms/powermac/feature.c @@ -2191,7 +2191,11 @@ static struct pmac_mb_def pmac_mb_defs[] = { PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, PMAC_MB_MAY_SLEEP, }, - { "iMac,1", "iMac (first generation)", + { "PowerMac10,2", "Mac mini (Late 2005)", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP, + }, + { "iMac,1", "iMac (first generation)", PMAC_TYPE_ORIG_IMAC, paddington_features, 0 }, diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile index 3dbef30..046ace9 100644 --- a/arch/powerpc/platforms/pseries/Makefile +++ b/arch/powerpc/platforms/pseries/Makefile @@ -26,3 +26,7 @@ obj-$(CONFIG_HCALL_STATS) += hvCall_inst.o obj-$(CONFIG_PHYP_DUMP) += phyp_dump.o obj-$(CONFIG_CMM) += cmm.o obj-$(CONFIG_DTL) += dtl.o + +ifeq ($(CONFIG_PPC_PSERIES),y) +obj-$(CONFIG_SUSPEND) += suspend.o +endif diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c index d71e585..227c1c3 100644 --- a/arch/powerpc/platforms/pseries/dlpar.c +++ b/arch/powerpc/platforms/pseries/dlpar.c @@ -463,6 +463,7 @@ static int dlpar_offline_cpu(struct device_node *dn) break; if (get_cpu_current_state(cpu) == CPU_STATE_ONLINE) { + set_preferred_offline_state(cpu, CPU_STATE_OFFLINE); cpu_maps_update_done(); rc = cpu_down(cpu); if (rc) diff --git a/arch/powerpc/platforms/pseries/eeh_cache.c b/arch/powerpc/platforms/pseries/eeh_cache.c index 30b987b..8ed0d2d 100644 --- a/arch/powerpc/platforms/pseries/eeh_cache.c +++ b/arch/powerpc/platforms/pseries/eeh_cache.c @@ -288,8 +288,7 @@ void __init pci_addr_cache_build(void) spin_lock_init(&pci_io_addr_cache_root.piar_lock); - while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { - + for_each_pci_dev(dev) { pci_addr_cache_insert_device(dev); dn = pci_device_to_OF_node(dev); diff --git a/arch/powerpc/platforms/pseries/event_sources.c b/arch/powerpc/platforms/pseries/event_sources.c index e889c9d..2605c31 100644 --- a/arch/powerpc/platforms/pseries/event_sources.c +++ b/arch/powerpc/platforms/pseries/event_sources.c @@ -41,9 +41,12 @@ void request_event_sources_irqs(struct device_node *np, if (count > 15) break; virqs[count] = irq_create_mapping(NULL, *(opicprop++)); - if (virqs[count] == NO_IRQ) - printk(KERN_ERR "Unable to allocate interrupt " - "number for %s\n", np->full_name); + if (virqs[count] == NO_IRQ) { + pr_err("event-sources: Unable to allocate " + "interrupt number for %s\n", + np->full_name); + WARN_ON(1); + } else count++; @@ -59,9 +62,12 @@ void request_event_sources_irqs(struct device_node *np, virqs[count] = irq_create_of_mapping(oirq.controller, oirq.specifier, oirq.size); - if (virqs[count] == NO_IRQ) - printk(KERN_ERR "Unable to allocate interrupt " - "number for %s\n", np->full_name); + if (virqs[count] == NO_IRQ) { + pr_err("event-sources: Unable to allocate " + "interrupt number for %s\n", + np->full_name); + WARN_ON(1); + } else count++; } @@ -70,8 +76,9 @@ void request_event_sources_irqs(struct device_node *np, /* Now request them */ for (i = 0; i < count; i++) { if (request_irq(virqs[i], handler, 0, name, NULL)) { - printk(KERN_ERR "Unable to request interrupt %d for " - "%s\n", virqs[i], np->full_name); + pr_err("event-sources: Unable to request interrupt " + "%d for %s\n", virqs[i], np->full_name); + WARN_ON(1); return; } } diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c index 8f85f39..fd50ccd 100644 --- a/arch/powerpc/platforms/pseries/hotplug-cpu.c +++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c @@ -116,6 +116,9 @@ static void pseries_mach_cpu_die(void) if (get_preferred_offline_state(cpu) == CPU_STATE_INACTIVE) { set_cpu_current_state(cpu, CPU_STATE_INACTIVE); + if (ppc_md.suspend_disable_cpu) + ppc_md.suspend_disable_cpu(); + cede_latency_hint = 2; get_lppaca()->idle = 1; @@ -190,12 +193,12 @@ static void pseries_cpu_die(unsigned int cpu) if (get_preferred_offline_state(cpu) == CPU_STATE_INACTIVE) { cpu_status = 1; - for (tries = 0; tries < 1000; tries++) { + for (tries = 0; tries < 5000; tries++) { if (get_cpu_current_state(cpu) == CPU_STATE_INACTIVE) { cpu_status = 0; break; } - cpu_relax(); + msleep(1); } } else if (get_preferred_offline_state(cpu) == CPU_STATE_OFFLINE) { diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c index 41a3e9a..a4fc6da 100644 --- a/arch/powerpc/platforms/pseries/ras.c +++ b/arch/powerpc/platforms/pseries/ras.c @@ -61,7 +61,6 @@ static int ras_check_exception_token; #define EPOW_SENSOR_TOKEN 9 #define EPOW_SENSOR_INDEX 0 -#define RAS_VECTOR_OFFSET 0x500 static irqreturn_t ras_epow_interrupt(int irq, void *dev_id); static irqreturn_t ras_error_interrupt(int irq, void *dev_id); @@ -121,7 +120,7 @@ static irqreturn_t ras_epow_interrupt(int irq, void *dev_id) spin_lock(&ras_log_buf_lock); status = rtas_call(ras_check_exception_token, 6, 1, NULL, - RAS_VECTOR_OFFSET, + RTAS_VECTOR_EXTERNAL_INTERRUPT, irq_map[irq].hwirq, RTAS_EPOW_WARNING | RTAS_POWERMGM_EVENTS, critical, __pa(&ras_log_buf), @@ -156,7 +155,7 @@ static irqreturn_t ras_error_interrupt(int irq, void *dev_id) spin_lock(&ras_log_buf_lock); status = rtas_call(ras_check_exception_token, 6, 1, NULL, - RAS_VECTOR_OFFSET, + RTAS_VECTOR_EXTERNAL_INTERRUPT, irq_map[irq].hwirq, RTAS_INTERNAL_ERROR, 1 /*Time Critical */, __pa(&ras_log_buf), diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c index 1a58637..57ddbb4 100644 --- a/arch/powerpc/platforms/pseries/reconfig.c +++ b/arch/powerpc/platforms/pseries/reconfig.c @@ -118,12 +118,10 @@ static int pSeries_reconfig_add_node(const char *path, struct property *proplist if (!np) goto out_err; - np->full_name = kmalloc(strlen(path) + 1, GFP_KERNEL); + np->full_name = kstrdup(path, GFP_KERNEL); if (!np->full_name) goto out_err; - strcpy(np->full_name, path); - np->properties = proplist; of_node_set_flag(np, OF_DYNAMIC); kref_init(&np->kref); diff --git a/arch/powerpc/platforms/pseries/suspend.c b/arch/powerpc/platforms/pseries/suspend.c new file mode 100644 index 0000000..ed72098 --- /dev/null +++ b/arch/powerpc/platforms/pseries/suspend.c @@ -0,0 +1,214 @@ +/* + * Copyright (C) 2010 Brian King IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/delay.h> +#include <linux/suspend.h> +#include <asm/firmware.h> +#include <asm/hvcall.h> +#include <asm/machdep.h> +#include <asm/mmu.h> +#include <asm/rtas.h> + +static u64 stream_id; +static struct sys_device suspend_sysdev; +static DECLARE_COMPLETION(suspend_work); +static struct rtas_suspend_me_data suspend_data; +static atomic_t suspending; + +/** + * pseries_suspend_begin - First phase of hibernation + * + * Check to ensure we are in a valid state to hibernate + * + * Return value: + * 0 on success / other on failure + **/ +static int pseries_suspend_begin(suspend_state_t state) +{ + long vasi_state, rc; + unsigned long retbuf[PLPAR_HCALL_BUFSIZE]; + + /* Make sure the state is valid */ + rc = plpar_hcall(H_VASI_STATE, retbuf, stream_id); + + vasi_state = retbuf[0]; + + if (rc) { + pr_err("pseries_suspend_begin: vasi_state returned %ld\n",rc); + return rc; + } else if (vasi_state == H_VASI_ENABLED) { + return -EAGAIN; + } else if (vasi_state != H_VASI_SUSPENDING) { + pr_err("pseries_suspend_begin: vasi_state returned state %ld\n", + vasi_state); + return -EIO; + } + + return 0; +} + +/** + * pseries_suspend_cpu - Suspend a single CPU + * + * Makes the H_JOIN call to suspend the CPU + * + **/ +static int pseries_suspend_cpu(void) +{ + if (atomic_read(&suspending)) + return rtas_suspend_cpu(&suspend_data); + return 0; +} + +/** + * pseries_suspend_enter - Final phase of hibernation + * + * Return value: + * 0 on success / other on failure + **/ +static int pseries_suspend_enter(suspend_state_t state) +{ + int rc = rtas_suspend_last_cpu(&suspend_data); + + atomic_set(&suspending, 0); + atomic_set(&suspend_data.done, 1); + return rc; +} + +/** + * pseries_prepare_late - Prepare to suspend all other CPUs + * + * Return value: + * 0 on success / other on failure + **/ +static int pseries_prepare_late(void) +{ + atomic_set(&suspending, 1); + atomic_set(&suspend_data.working, 0); + atomic_set(&suspend_data.done, 0); + atomic_set(&suspend_data.error, 0); + suspend_data.complete = &suspend_work; + INIT_COMPLETION(suspend_work); + return 0; +} + +/** + * store_hibernate - Initiate partition hibernation + * @classdev: sysdev class struct + * @attr: class device attribute struct + * @buf: buffer + * @count: buffer size + * + * Write the stream ID received from the HMC to this file + * to trigger hibernating the partition + * + * Return value: + * number of bytes printed to buffer / other on failure + **/ +static ssize_t store_hibernate(struct sysdev_class *classdev, + struct sysdev_class_attribute *attr, + const char *buf, size_t count) +{ + int rc; + + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + stream_id = simple_strtoul(buf, NULL, 16); + + do { + rc = pseries_suspend_begin(PM_SUSPEND_MEM); + if (rc == -EAGAIN) + ssleep(1); + } while (rc == -EAGAIN); + + if (!rc) + rc = pm_suspend(PM_SUSPEND_MEM); + + stream_id = 0; + + if (!rc) + rc = count; + return rc; +} + +static SYSDEV_CLASS_ATTR(hibernate, S_IWUSR, NULL, store_hibernate); + +static struct sysdev_class suspend_sysdev_class = { + .name = "power", +}; + +static struct platform_suspend_ops pseries_suspend_ops = { + .valid = suspend_valid_only_mem, + .begin = pseries_suspend_begin, + .prepare_late = pseries_prepare_late, + .enter = pseries_suspend_enter, +}; + +/** + * pseries_suspend_sysfs_register - Register with sysfs + * + * Return value: + * 0 on success / other on failure + **/ +static int pseries_suspend_sysfs_register(struct sys_device *sysdev) +{ + int rc; + + if ((rc = sysdev_class_register(&suspend_sysdev_class))) + return rc; + + sysdev->id = 0; + sysdev->cls = &suspend_sysdev_class; + + if ((rc = sysdev_class_create_file(&suspend_sysdev_class, &attr_hibernate))) + goto class_unregister; + + return 0; + +class_unregister: + sysdev_class_unregister(&suspend_sysdev_class); + return rc; +} + +/** + * pseries_suspend_init - initcall for pSeries suspend + * + * Return value: + * 0 on success / other on failure + **/ +static int __init pseries_suspend_init(void) +{ + int rc; + + if (!machine_is(pseries) || !firmware_has_feature(FW_FEATURE_LPAR)) + return 0; + + suspend_data.token = rtas_token("ibm,suspend-me"); + if (suspend_data.token == RTAS_UNKNOWN_SERVICE) + return 0; + + if ((rc = pseries_suspend_sysfs_register(&suspend_sysdev))) + return rc; + + ppc_md.suspend_disable_cpu = pseries_suspend_cpu; + suspend_set_ops(&pseries_suspend_ops); + return 0; +} + +__initcall(pseries_suspend_init); diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c index f19d194..5b22b07 100644 --- a/arch/powerpc/platforms/pseries/xics.c +++ b/arch/powerpc/platforms/pseries/xics.c @@ -549,8 +549,6 @@ static irqreturn_t xics_ipi_dispatch(int cpu) { unsigned long *tgt = &per_cpu(xics_ipi_message, cpu); - WARN_ON(cpu_is_offline(cpu)); - mb(); /* order mmio clearing qirr */ while (*tgt) { if (test_and_clear_bit(PPC_MSG_CALL_FUNCTION, tgt)) { diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index 356c6a0..209384b 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -412,6 +412,7 @@ DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P4080, quirk_fsl_pcie_header); #endif /* CONFIG_FSL_SOC_BOOKE || CONFIG_PPC_86xx */ #if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_MPC512x) +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8308, quirk_fsl_pcie_header); DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8314E, quirk_fsl_pcie_header); DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8314, quirk_fsl_pcie_header); DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8315E, quirk_fsl_pcie_header); diff --git a/arch/powerpc/sysdev/fsl_soc.h b/arch/powerpc/sysdev/fsl_soc.h index 42381bb..5360948 100644 --- a/arch/powerpc/sysdev/fsl_soc.h +++ b/arch/powerpc/sysdev/fsl_soc.h @@ -30,6 +30,7 @@ struct platform_diu_data_ops { void (*set_pixel_clock) (unsigned int pixclock); ssize_t (*show_monitor_port) (int monitor_port, char *buf); int (*set_sysfs_monitor_port) (int val); + void (*release_bootmem) (void); }; extern struct platform_diu_data_ops diu_ops; diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 20b73c0..7c13426 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -1636,6 +1636,24 @@ void __devinit smp_mpic_setup_cpu(int cpu) { mpic_setup_this_cpu(); } + +void mpic_reset_core(int cpu) +{ + struct mpic *mpic = mpic_primary; + u32 pir; + int cpuid = get_hard_smp_processor_id(cpu); + + /* Set target bit for core reset */ + pir = mpic_read(mpic->gregs, MPIC_INFO(GREG_PROCESSOR_INIT)); + pir |= (1 << cpuid); + mpic_write(mpic->gregs, MPIC_INFO(GREG_PROCESSOR_INIT), pir); + mpic_read(mpic->gregs, MPIC_INFO(GREG_PROCESSOR_INIT)); + + /* Restore target bit after reset complete */ + pir &= ~(1 << cpuid); + mpic_write(mpic->gregs, MPIC_INFO(GREG_PROCESSOR_INIT), pir); + mpic_read(mpic->gregs, MPIC_INFO(GREG_PROCESSOR_INIT)); +} #endif /* CONFIG_SMP */ #ifdef CONFIG_PM diff --git a/arch/powerpc/sysdev/mpic.h b/arch/powerpc/sysdev/mpic.h index eff433c..e4a6df7 100644 --- a/arch/powerpc/sysdev/mpic.h +++ b/arch/powerpc/sysdev/mpic.h @@ -37,5 +37,6 @@ static inline int mpic_pasemi_msi_init(struct mpic *mpic) extern int mpic_set_irq_type(unsigned int virq, unsigned int flow_type); extern void mpic_set_vector(unsigned int virq, unsigned int vector); extern int mpic_set_affinity(unsigned int irq, const struct cpumask *cpumask); +extern void mpic_reset_core(int cpu); #endif /* _POWERPC_SYSDEV_MPIC_H */ diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index 8bad7d5..0554445 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -155,6 +155,9 @@ static int do_spu_cmd(void); #ifdef CONFIG_44x static void dump_tlb_44x(void); #endif +#ifdef CONFIG_PPC_BOOK3E +static void dump_tlb_book3e(void); +#endif static int xmon_no_auto_backtrace; @@ -888,6 +891,11 @@ cmds(struct pt_regs *excp) dump_tlb_44x(); break; #endif +#ifdef CONFIG_PPC_BOOK3E + case 'u': + dump_tlb_book3e(); + break; +#endif default: printf("Unrecognized command: "); do { @@ -2701,6 +2709,150 @@ static void dump_tlb_44x(void) } #endif /* CONFIG_44x */ +#ifdef CONFIG_PPC_BOOK3E +static void dump_tlb_book3e(void) +{ + u32 mmucfg, pidmask, lpidmask; + u64 ramask; + int i, tlb, ntlbs, pidsz, lpidsz, rasz, lrat = 0; + int mmu_version; + static const char *pgsz_names[] = { + " 1K", + " 2K", + " 4K", + " 8K", + " 16K", + " 32K", + " 64K", + "128K", + "256K", + "512K", + " 1M", + " 2M", + " 4M", + " 8M", + " 16M", + " 32M", + " 64M", + "128M", + "256M", + "512M", + " 1G", + " 2G", + " 4G", + " 8G", + " 16G", + " 32G", + " 64G", + "128G", + "256G", + "512G", + " 1T", + " 2T", + }; + + /* Gather some infos about the MMU */ + mmucfg = mfspr(SPRN_MMUCFG); + mmu_version = (mmucfg & 3) + 1; + ntlbs = ((mmucfg >> 2) & 3) + 1; + pidsz = ((mmucfg >> 6) & 0x1f) + 1; + lpidsz = (mmucfg >> 24) & 0xf; + rasz = (mmucfg >> 16) & 0x7f; + if ((mmu_version > 1) && (mmucfg & 0x10000)) + lrat = 1; + printf("Book3E MMU MAV=%d.0,%d TLBs,%d-bit PID,%d-bit LPID,%d-bit RA\n", + mmu_version, ntlbs, pidsz, lpidsz, rasz); + pidmask = (1ul << pidsz) - 1; + lpidmask = (1ul << lpidsz) - 1; + ramask = (1ull << rasz) - 1; + + for (tlb = 0; tlb < ntlbs; tlb++) { + u32 tlbcfg; + int nent, assoc, new_cc = 1; + printf("TLB %d:\n------\n", tlb); + switch(tlb) { + case 0: + tlbcfg = mfspr(SPRN_TLB0CFG); + break; + case 1: + tlbcfg = mfspr(SPRN_TLB1CFG); + break; + case 2: + tlbcfg = mfspr(SPRN_TLB2CFG); + break; + case 3: + tlbcfg = mfspr(SPRN_TLB3CFG); + break; + default: + printf("Unsupported TLB number !\n"); + continue; + } + nent = tlbcfg & 0xfff; + assoc = (tlbcfg >> 24) & 0xff; + for (i = 0; i < nent; i++) { + u32 mas0 = MAS0_TLBSEL(tlb); + u32 mas1 = MAS1_TSIZE(BOOK3E_PAGESZ_4K); + u64 mas2 = 0; + u64 mas7_mas3; + int esel = i, cc = i; + + if (assoc != 0) { + cc = i / assoc; + esel = i % assoc; + mas2 = cc * 0x1000; + } + + mas0 |= MAS0_ESEL(esel); + mtspr(SPRN_MAS0, mas0); + mtspr(SPRN_MAS1, mas1); + mtspr(SPRN_MAS2, mas2); + asm volatile("tlbre 0,0,0" : : : "memory"); + mas1 = mfspr(SPRN_MAS1); + mas2 = mfspr(SPRN_MAS2); + mas7_mas3 = mfspr(SPRN_MAS7_MAS3); + if (assoc && (i % assoc) == 0) + new_cc = 1; + if (!(mas1 & MAS1_VALID)) + continue; + if (assoc == 0) + printf("%04x- ", i); + else if (new_cc) + printf("%04x-%c", cc, 'A' + esel); + else + printf(" |%c", 'A' + esel); + new_cc = 0; + printf(" %016llx %04x %s %c%c AS%c", + mas2 & ~0x3ffull, + (mas1 >> 16) & 0x3fff, + pgsz_names[(mas1 >> 7) & 0x1f], + mas1 & MAS1_IND ? 'I' : ' ', + mas1 & MAS1_IPROT ? 'P' : ' ', + mas1 & MAS1_TS ? '1' : '0'); + printf(" %c%c%c%c%c%c%c", + mas2 & MAS2_X0 ? 'a' : ' ', + mas2 & MAS2_X1 ? 'v' : ' ', + mas2 & MAS2_W ? 'w' : ' ', + mas2 & MAS2_I ? 'i' : ' ', + mas2 & MAS2_M ? 'm' : ' ', + mas2 & MAS2_G ? 'g' : ' ', + mas2 & MAS2_E ? 'e' : ' '); + printf(" %016llx", mas7_mas3 & ramask & ~0x7ffull); + if (mas1 & MAS1_IND) + printf(" %s\n", + pgsz_names[(mas7_mas3 >> 1) & 0x1f]); + else + printf(" U%c%c%c S%c%c%c\n", + mas7_mas3 & MAS3_UX ? 'x' : ' ', + mas7_mas3 & MAS3_UW ? 'w' : ' ', + mas7_mas3 & MAS3_UR ? 'r' : ' ', + mas7_mas3 & MAS3_SX ? 'x' : ' ', + mas7_mas3 & MAS3_SW ? 'w' : ' ', + mas7_mas3 & MAS3_SR ? 'r' : ' '); + } + } +} +#endif /* CONFIG_PPC_BOOK3E */ + static void xmon_init(int enable) { #ifdef CONFIG_PPC_ISERIES diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c index 35cca4c..fa27d16 100644 --- a/drivers/char/hvc_console.c +++ b/drivers/char/hvc_console.c @@ -194,7 +194,7 @@ static int __init hvc_console_setup(struct console *co, char *options) return 0; } -static struct console hvc_con_driver = { +static struct console hvc_console = { .name = "hvc", .write = hvc_console_print, .device = hvc_console_device, @@ -220,7 +220,7 @@ static struct console hvc_con_driver = { */ static int __init hvc_console_init(void) { - register_console(&hvc_con_driver); + register_console(&hvc_console); return 0; } console_initcall(hvc_console_init); @@ -276,8 +276,8 @@ int hvc_instantiate(uint32_t vtermno, int index, const struct hv_ops *ops) * now (setup won't fail at this point). It's ok to just * call register again if previously .setup failed. */ - if (index == hvc_con_driver.index) - register_console(&hvc_con_driver); + if (index == hvc_console.index) + register_console(&hvc_console); return 0; } @@ -641,7 +641,7 @@ int hvc_poll(struct hvc_struct *hp) } for (i = 0; i < n; ++i) { #ifdef CONFIG_MAGIC_SYSRQ - if (hp->index == hvc_con_driver.index) { + if (hp->index == hvc_console.index) { /* Handle the SysRq Hack */ /* XXX should support a sequence */ if (buf[i] == '\x0f') { /* ^O */ @@ -909,7 +909,7 @@ static void __exit hvc_exit(void) tty_unregister_driver(hvc_driver); /* return tty_struct instances allocated in hvc_init(). */ put_tty_driver(hvc_driver); - unregister_console(&hvc_con_driver); + unregister_console(&hvc_console); } } module_exit(hvc_exit); diff --git a/drivers/char/hvsi.c b/drivers/char/hvsi.c index d4b14ff..1f4b6de 100644 --- a/drivers/char/hvsi.c +++ b/drivers/char/hvsi.c @@ -1255,7 +1255,7 @@ static int __init hvsi_console_setup(struct console *console, char *options) return 0; } -static struct console hvsi_con_driver = { +static struct console hvsi_console = { .name = "hvsi", .write = hvsi_console_print, .device = hvsi_console_device, @@ -1308,7 +1308,7 @@ static int __init hvsi_console_init(void) } if (hvsi_count) - register_console(&hvsi_con_driver); + register_console(&hvsi_console); return 0; } console_initcall(hvsi_console_init); diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c index df00eb1..54247d4 100644 --- a/drivers/i2c/busses/i2c-mpc.c +++ b/drivers/i2c/busses/i2c-mpc.c @@ -63,6 +63,7 @@ struct mpc_i2c { wait_queue_head_t queue; struct i2c_adapter adap; int irq; + u32 real_clk; }; struct mpc_i2c_divider { @@ -96,20 +97,23 @@ static irqreturn_t mpc_i2c_isr(int irq, void *dev_id) /* Sometimes 9th clock pulse isn't generated, and slave doesn't release * the bus, because it wants to send ACK. * Following sequence of enabling/disabling and sending start/stop generates - * the pulse, so it's all OK. + * the 9 pulses, so it's all OK. */ static void mpc_i2c_fixup(struct mpc_i2c *i2c) { - writeccr(i2c, 0); - udelay(30); - writeccr(i2c, CCR_MEN); - udelay(30); - writeccr(i2c, CCR_MSTA | CCR_MTX); - udelay(30); - writeccr(i2c, CCR_MSTA | CCR_MTX | CCR_MEN); - udelay(30); - writeccr(i2c, CCR_MEN); - udelay(30); + int k; + u32 delay_val = 1000000 / i2c->real_clk + 1; + + if (delay_val < 2) + delay_val = 2; + + for (k = 9; k; k--) { + writeccr(i2c, 0); + writeccr(i2c, CCR_MSTA | CCR_MTX | CCR_MEN); + udelay(delay_val); + writeccr(i2c, CCR_MEN); + udelay(delay_val << 1); + } } static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing) @@ -190,15 +194,18 @@ static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] __devinitconst = { }; static int __devinit mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock, - int prescaler) + int prescaler, u32 *real_clk) { const struct mpc_i2c_divider *div = NULL; unsigned int pvr = mfspr(SPRN_PVR); u32 divider; int i; - if (clock == MPC_I2C_CLOCK_LEGACY) + if (clock == MPC_I2C_CLOCK_LEGACY) { + /* see below - default fdr = 0x3f -> div = 2048 */ + *real_clk = mpc5xxx_get_bus_frequency(node) / 2048; return -EINVAL; + } /* Determine divider value */ divider = mpc5xxx_get_bus_frequency(node) / clock; @@ -216,7 +223,8 @@ static int __devinit mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock, break; } - return div ? (int)div->fdr : -EINVAL; + *real_clk = mpc5xxx_get_bus_frequency(node) / div->divider; + return (int)div->fdr; } static void __devinit mpc_i2c_setup_52xx(struct device_node *node, @@ -231,13 +239,14 @@ static void __devinit mpc_i2c_setup_52xx(struct device_node *node, return; } - ret = mpc_i2c_get_fdr_52xx(node, clock, prescaler); + ret = mpc_i2c_get_fdr_52xx(node, clock, prescaler, &i2c->real_clk); fdr = (ret >= 0) ? ret : 0x3f; /* backward compatibility */ writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR); if (ret >= 0) - dev_info(i2c->dev, "clock %d Hz (fdr=%d)\n", clock, fdr); + dev_info(i2c->dev, "clock %u Hz (fdr=%d)\n", i2c->real_clk, + fdr); } #else /* !(CONFIG_PPC_MPC52xx || CONFIG_PPC_MPC512x) */ static void __devinit mpc_i2c_setup_52xx(struct device_node *node, @@ -334,14 +343,17 @@ static u32 __devinit mpc_i2c_get_sec_cfg_8xxx(void) } static int __devinit mpc_i2c_get_fdr_8xxx(struct device_node *node, u32 clock, - u32 prescaler) + u32 prescaler, u32 *real_clk) { const struct mpc_i2c_divider *div = NULL; u32 divider; int i; - if (clock == MPC_I2C_CLOCK_LEGACY) + if (clock == MPC_I2C_CLOCK_LEGACY) { + /* see below - default fdr = 0x1031 -> div = 16 * 3072 */ + *real_clk = fsl_get_sys_freq() / prescaler / (16 * 3072); return -EINVAL; + } /* Determine proper divider value */ if (of_device_is_compatible(node, "fsl,mpc8544-i2c")) @@ -364,6 +376,7 @@ static int __devinit mpc_i2c_get_fdr_8xxx(struct device_node *node, u32 clock, break; } + *real_clk = fsl_get_sys_freq() / prescaler / div->divider; return div ? (int)div->fdr : -EINVAL; } @@ -380,7 +393,7 @@ static void __devinit mpc_i2c_setup_8xxx(struct device_node *node, return; } - ret = mpc_i2c_get_fdr_8xxx(node, clock, prescaler); + ret = mpc_i2c_get_fdr_8xxx(node, clock, prescaler, &i2c->real_clk); fdr = (ret >= 0) ? ret : 0x1031; /* backward compatibility */ writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR); @@ -388,7 +401,7 @@ static void __devinit mpc_i2c_setup_8xxx(struct device_node *node, if (ret >= 0) dev_info(i2c->dev, "clock %d Hz (dfsrr=%d fdr=%d)\n", - clock, fdr >> 8, fdr & 0xff); + i2c->real_clk, fdr >> 8, fdr & 0xff); } #else /* !CONFIG_FSL_SOC */ @@ -500,10 +513,14 @@ static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) return -EINTR; } if (time_after(jiffies, orig_jiffies + HZ)) { + u8 status = readb(i2c->base + MPC_I2C_SR); + dev_dbg(i2c->dev, "timeout\n"); - if (readb(i2c->base + MPC_I2C_SR) == - (CSR_MCF | CSR_MBB | CSR_RXAK)) + if ((status & (CSR_MCF | CSR_MBB | CSR_RXAK)) != 0) { + writeb(status & ~CSR_MAL, + i2c->base + MPC_I2C_SR); mpc_i2c_fixup(i2c); + } return -EIO; } schedule(); @@ -595,6 +612,14 @@ static int __devinit fsl_i2c_probe(struct of_device *op, mpc_i2c_setup_8xxx(op->dev.of_node, i2c, clock, 0); } + prop = of_get_property(op->dev.of_node, "fsl,timeout", &plen); + if (prop && plen == sizeof(u32)) { + mpc_ops.timeout = *prop * HZ / 1000000; + if (mpc_ops.timeout < 5) + mpc_ops.timeout = 5; + } + dev_info(i2c->dev, "timeout %u us\n", mpc_ops.timeout * 1000000 / HZ); + dev_set_drvdata(&op->dev, i2c); i2c->adap = mpc_ops; diff --git a/drivers/input/serio/i8042-io.h b/drivers/input/serio/i8042-io.h index 847f4aa..5d48bb6 100644 --- a/drivers/input/serio/i8042-io.h +++ b/drivers/input/serio/i8042-io.h @@ -27,6 +27,11 @@ #include <asm/irq.h> #elif defined(CONFIG_SH_CAYMAN) #include <asm/irq.h> +#elif defined(CONFIG_PPC) +extern int of_i8042_kbd_irq; +extern int of_i8042_aux_irq; +# define I8042_KBD_IRQ of_i8042_kbd_irq +# define I8042_AUX_IRQ of_i8042_aux_irq #else # define I8042_KBD_IRQ 1 # define I8042_AUX_IRQ 12 diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index f22bc9f..6629d09 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -321,7 +321,7 @@ config MTD_CFI_FLAGADM config MTD_REDWOOD tristate "CFI Flash devices mapped on IBM Redwood" - depends on MTD_CFI && ( REDWOOD_4 || REDWOOD_5 || REDWOOD_6 ) + depends on MTD_CFI help This enables access routines for the flash chips on the IBM Redwood board. If you have one of these boards and would like to diff --git a/drivers/mtd/maps/redwood.c b/drivers/mtd/maps/redwood.c index 933c0b6..d2c9db0 100644 --- a/drivers/mtd/maps/redwood.c +++ b/drivers/mtd/maps/redwood.c @@ -22,8 +22,6 @@ #include <asm/io.h> -#if !defined (CONFIG_REDWOOD_6) - #define WINDOW_ADDR 0xffc00000 #define WINDOW_SIZE 0x00400000 @@ -69,47 +67,6 @@ static struct mtd_partition redwood_flash_partitions[] = { } }; -#else /* CONFIG_REDWOOD_6 */ -/* FIXME: the window is bigger - armin */ -#define WINDOW_ADDR 0xff800000 -#define WINDOW_SIZE 0x00800000 - -#define RW_PART0_OF 0 -#define RW_PART0_SZ 0x400000 /* 4 MiB data */ -#define RW_PART1_OF RW_PART0_OF + RW_PART0_SZ -#define RW_PART1_SZ 0x10000 /* 64K VPD */ -#define RW_PART2_OF RW_PART1_OF + RW_PART1_SZ -#define RW_PART2_SZ 0x400000 - (0x10000 + 0x20000) -#define RW_PART3_OF RW_PART2_OF + RW_PART2_SZ -#define RW_PART3_SZ 0x20000 - -static struct mtd_partition redwood_flash_partitions[] = { - { - .name = "Redwood filesystem", - .offset = RW_PART0_OF, - .size = RW_PART0_SZ - }, - { - .name = "Redwood OpenBIOS Vital Product Data", - .offset = RW_PART1_OF, - .size = RW_PART1_SZ, - .mask_flags = MTD_WRITEABLE /* force read-only */ - }, - { - .name = "Redwood kernel", - .offset = RW_PART2_OF, - .size = RW_PART2_SZ - }, - { - .name = "Redwood OpenBIOS", - .offset = RW_PART3_OF, - .size = RW_PART3_SZ, - .mask_flags = MTD_WRITEABLE /* force read-only */ - } -}; - -#endif /* CONFIG_REDWOOD_6 */ - struct map_info redwood_flash_map = { .name = "IBM Redwood", .size = WINDOW_SIZE, diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 23c1318..5a68953 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -914,7 +914,7 @@ config SMC91X tristate "SMC 91C9x/91C1xxx support" select CRC32 select MII - depends on ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || \ + depends on ARM || M32R || SUPERH || \ MIPS || BLACKFIN || MN10300 || COLDFIRE help This is a driver for SMC's 91x series of Ethernet chipsets, diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index 8d2772c..ee74791 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h @@ -83,43 +83,6 @@ static inline void SMC_outw(u16 val, void __iomem *ioaddr, int reg) } } -#elif defined(CONFIG_REDWOOD_5) || defined(CONFIG_REDWOOD_6) - -/* We can only do 16-bit reads and writes in the static memory space. */ -#define SMC_CAN_USE_8BIT 0 -#define SMC_CAN_USE_16BIT 1 -#define SMC_CAN_USE_32BIT 0 -#define SMC_NOWAIT 1 - -#define SMC_IO_SHIFT 0 - -#define SMC_inw(a, r) in_be16((volatile u16 *)((a) + (r))) -#define SMC_outw(v, a, r) out_be16((volatile u16 *)((a) + (r)), v) -#define SMC_insw(a, r, p, l) \ - do { \ - unsigned long __port = (a) + (r); \ - u16 *__p = (u16 *)(p); \ - int __l = (l); \ - insw(__port, __p, __l); \ - while (__l > 0) { \ - *__p = swab16(*__p); \ - __p++; \ - __l--; \ - } \ - } while (0) -#define SMC_outsw(a, r, p, l) \ - do { \ - unsigned long __port = (a) + (r); \ - u16 *__p = (u16 *)(p); \ - int __l = (l); \ - while (__l > 0) { \ - /* Believe it or not, the swab isn't needed. */ \ - outw( /* swab16 */ (*__p++), __port); \ - __l--; \ - } \ - } while (0) -#define SMC_IRQ_FLAGS (0) - #elif defined(CONFIG_SA1100_PLEB) /* We can only do 16-bit reads and writes in the static memory space. */ #define SMC_CAN_USE_8BIT 1 diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c index 84a35f6..1a88b36 100644 --- a/drivers/serial/mpc52xx_uart.c +++ b/drivers/serial/mpc52xx_uart.c @@ -113,7 +113,9 @@ struct psc_ops { unsigned char (*read_char)(struct uart_port *port); void (*cw_disable_ints)(struct uart_port *port); void (*cw_restore_ints)(struct uart_port *port); - unsigned long (*getuartclk)(void *p); + unsigned int (*set_baudrate)(struct uart_port *port, + struct ktermios *new, + struct ktermios *old); int (*clock)(struct uart_port *port, int enable); int (*fifoc_init)(void); void (*fifoc_uninit)(void); @@ -121,6 +123,16 @@ struct psc_ops { irqreturn_t (*handle_irq)(struct uart_port *port); }; +/* setting the prescaler and divisor reg is common for all chips */ +static inline void mpc52xx_set_divisor(struct mpc52xx_psc __iomem *psc, + u16 prescaler, unsigned int divisor) +{ + /* select prescaler */ + out_be16(&psc->mpc52xx_psc_clock_select, prescaler); + out_8(&psc->ctur, divisor >> 8); + out_8(&psc->ctlr, divisor & 0xff); +} + #ifdef CONFIG_PPC_MPC52xx #define FIFO_52xx(port) ((struct mpc52xx_psc_fifo __iomem *)(PSC(port)+1)) static void mpc52xx_psc_fifo_init(struct uart_port *port) @@ -128,9 +140,6 @@ static void mpc52xx_psc_fifo_init(struct uart_port *port) struct mpc52xx_psc __iomem *psc = PSC(port); struct mpc52xx_psc_fifo __iomem *fifo = FIFO_52xx(port); - /* /32 prescaler */ - out_be16(&psc->mpc52xx_psc_clock_select, 0xdd00); - out_8(&fifo->rfcntl, 0x00); out_be16(&fifo->rfalarm, 0x1ff); out_8(&fifo->tfcntl, 0x07); @@ -219,15 +228,47 @@ static void mpc52xx_psc_cw_restore_ints(struct uart_port *port) out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask); } -/* Search for bus-frequency property in this node or a parent */ -static unsigned long mpc52xx_getuartclk(void *p) +static unsigned int mpc5200_psc_set_baudrate(struct uart_port *port, + struct ktermios *new, + struct ktermios *old) { - /* - * 5200 UARTs have a / 32 prescaler - * but the generic serial code assumes 16 - * so return ipb freq / 2 - */ - return mpc5xxx_get_bus_frequency(p) / 2; + unsigned int baud; + unsigned int divisor; + + /* The 5200 has a fixed /32 prescaler, uartclk contains the ipb freq */ + baud = uart_get_baud_rate(port, new, old, + port->uartclk / (32 * 0xffff) + 1, + port->uartclk / 32); + divisor = (port->uartclk + 16 * baud) / (32 * baud); + + /* enable the /32 prescaler and set the divisor */ + mpc52xx_set_divisor(PSC(port), 0xdd00, divisor); + return baud; +} + +static unsigned int mpc5200b_psc_set_baudrate(struct uart_port *port, + struct ktermios *new, + struct ktermios *old) +{ + unsigned int baud; + unsigned int divisor; + u16 prescaler; + + /* The 5200B has a selectable /4 or /32 prescaler, uartclk contains the + * ipb freq */ + baud = uart_get_baud_rate(port, new, old, + port->uartclk / (32 * 0xffff) + 1, + port->uartclk / 4); + divisor = (port->uartclk + 2 * baud) / (4 * baud); + + /* select the proper prescaler and set the divisor */ + if (divisor > 0xffff) { + divisor = (divisor + 4) / 8; + prescaler = 0xdd00; /* /32 */ + } else + prescaler = 0xff00; /* /4 */ + mpc52xx_set_divisor(PSC(port), prescaler, divisor); + return baud; } static void mpc52xx_psc_get_irq(struct uart_port *port, struct device_node *np) @@ -258,7 +299,28 @@ static struct psc_ops mpc52xx_psc_ops = { .read_char = mpc52xx_psc_read_char, .cw_disable_ints = mpc52xx_psc_cw_disable_ints, .cw_restore_ints = mpc52xx_psc_cw_restore_ints, - .getuartclk = mpc52xx_getuartclk, + .set_baudrate = mpc5200_psc_set_baudrate, + .get_irq = mpc52xx_psc_get_irq, + .handle_irq = mpc52xx_psc_handle_irq, +}; + +static struct psc_ops mpc5200b_psc_ops = { + .fifo_init = mpc52xx_psc_fifo_init, + .raw_rx_rdy = mpc52xx_psc_raw_rx_rdy, + .raw_tx_rdy = mpc52xx_psc_raw_tx_rdy, + .rx_rdy = mpc52xx_psc_rx_rdy, + .tx_rdy = mpc52xx_psc_tx_rdy, + .tx_empty = mpc52xx_psc_tx_empty, + .stop_rx = mpc52xx_psc_stop_rx, + .start_tx = mpc52xx_psc_start_tx, + .stop_tx = mpc52xx_psc_stop_tx, + .rx_clr_irq = mpc52xx_psc_rx_clr_irq, + .tx_clr_irq = mpc52xx_psc_tx_clr_irq, + .write_char = mpc52xx_psc_write_char, + .read_char = mpc52xx_psc_read_char, + .cw_disable_ints = mpc52xx_psc_cw_disable_ints, + .cw_restore_ints = mpc52xx_psc_cw_restore_ints, + .set_baudrate = mpc5200b_psc_set_baudrate, .get_irq = mpc52xx_psc_get_irq, .handle_irq = mpc52xx_psc_handle_irq, }; @@ -392,9 +454,35 @@ static void mpc512x_psc_cw_restore_ints(struct uart_port *port) out_be32(&FIFO_512x(port)->rximr, port->read_status_mask & 0x7f); } -static unsigned long mpc512x_getuartclk(void *p) +static unsigned int mpc512x_psc_set_baudrate(struct uart_port *port, + struct ktermios *new, + struct ktermios *old) { - return mpc5xxx_get_bus_frequency(p); + unsigned int baud; + unsigned int divisor; + + /* + * The "MPC5121e Microcontroller Reference Manual, Rev. 3" says on + * pg. 30-10 that the chip supports a /32 and a /10 prescaler. + * Furthermore, it states that "After reset, the prescaler by 10 + * for the UART mode is selected", but the reset register value is + * 0x0000 which means a /32 prescaler. This is wrong. + * + * In reality using /32 prescaler doesn't work, as it is not supported! + * Use /16 or /10 prescaler, see "MPC5121e Hardware Design Guide", + * Chapter 4.1 PSC in UART Mode. + * Calculate with a /16 prescaler here. + */ + + /* uartclk contains the ips freq */ + baud = uart_get_baud_rate(port, new, old, + port->uartclk / (16 * 0xffff) + 1, + port->uartclk / 16); + divisor = (port->uartclk + 8 * baud) / (16 * baud); + + /* enable the /16 prescaler and set the divisor */ + mpc52xx_set_divisor(PSC(port), 0xdd00, divisor); + return baud; } /* Init PSC FIFO Controller */ @@ -498,7 +586,7 @@ static struct psc_ops mpc512x_psc_ops = { .read_char = mpc512x_psc_read_char, .cw_disable_ints = mpc512x_psc_cw_disable_ints, .cw_restore_ints = mpc512x_psc_cw_restore_ints, - .getuartclk = mpc512x_getuartclk, + .set_baudrate = mpc512x_psc_set_baudrate, .clock = mpc512x_psc_clock, .fifoc_init = mpc512x_psc_fifoc_init, .fifoc_uninit = mpc512x_psc_fifoc_uninit, @@ -666,8 +754,8 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new, struct mpc52xx_psc __iomem *psc = PSC(port); unsigned long flags; unsigned char mr1, mr2; - unsigned short ctr; - unsigned int j, baud, quot; + unsigned int j; + unsigned int baud; /* Prepare what we're gonna write */ mr1 = 0; @@ -704,16 +792,9 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new, mr2 |= MPC52xx_PSC_MODE_TXCTS; } - baud = uart_get_baud_rate(port, new, old, 0, port->uartclk/16); - quot = uart_get_divisor(port, baud); - ctr = quot & 0xffff; - /* Get the lock */ spin_lock_irqsave(&port->lock, flags); - /* Update the per-port timeout */ - uart_update_timeout(port, new->c_cflag, baud); - /* Do our best to flush TX & RX, so we don't lose anything */ /* But we don't wait indefinitely ! */ j = 5000000; /* Maximum wait */ @@ -737,8 +818,10 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new, out_8(&psc->command, MPC52xx_PSC_SEL_MODE_REG_1); out_8(&psc->mode, mr1); out_8(&psc->mode, mr2); - out_8(&psc->ctur, ctr >> 8); - out_8(&psc->ctlr, ctr & 0xff); + baud = psc_ops->set_baudrate(port, new, old); + + /* Update the per-port timeout */ + uart_update_timeout(port, new->c_cflag, baud); if (UART_ENABLE_MS(port, new->c_cflag)) mpc52xx_uart_enable_ms(port); @@ -1118,7 +1201,7 @@ mpc52xx_console_setup(struct console *co, char *options) return ret; } - uartclk = psc_ops->getuartclk(np); + uartclk = mpc5xxx_get_bus_frequency(np); if (uartclk == 0) { pr_debug("Could not find uart clock frequency!\n"); return -EINVAL; @@ -1201,6 +1284,7 @@ static struct uart_driver mpc52xx_uart_driver = { static struct of_device_id mpc52xx_uart_of_match[] = { #ifdef CONFIG_PPC_MPC52xx + { .compatible = "fsl,mpc5200b-psc-uart", .data = &mpc5200b_psc_ops, }, { .compatible = "fsl,mpc5200-psc-uart", .data = &mpc52xx_psc_ops, }, /* binding used by old lite5200 device trees: */ { .compatible = "mpc5200-psc-uart", .data = &mpc52xx_psc_ops, }, @@ -1233,7 +1317,10 @@ mpc52xx_uart_of_probe(struct of_device *op, const struct of_device_id *match) pr_debug("Found %s assigned to ttyPSC%x\n", mpc52xx_uart_nodes[idx]->full_name, idx); - uartclk = psc_ops->getuartclk(op->dev.of_node); + /* set the uart clock to the input clock of the psc, the different + * prescalers are taken into account in the set_baudrate() methods + * of the respective chip */ + uartclk = mpc5xxx_get_bus_frequency(op->dev.of_node); if (uartclk == 0) { dev_dbg(&op->dev, "Could not find uart clock frequency!\n"); return -EINVAL; diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 9e711a1..7b11ea6 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -1871,6 +1871,7 @@ config FB_MBX_DEBUG config FB_FSL_DIU tristate "Freescale DIU framebuffer support" depends on FB && FSL_SOC + select FB_MODE_HELPERS select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c index 27455ce..e38ad22 100644 --- a/drivers/video/fsl-diu-fb.c +++ b/drivers/video/fsl-diu-fb.c @@ -34,7 +34,8 @@ #include <linux/of_platform.h> #include <sysdev/fsl_soc.h> -#include "fsl-diu-fb.h" +#include <linux/fsl-diu-fb.h> +#include "edid.h" /* * These parameters give default parameters @@ -217,6 +218,7 @@ struct mfb_info { int x_aoi_d; /* aoi display x offset to physical screen */ int y_aoi_d; /* aoi display y offset to physical screen */ struct fsl_diu_data *parent; + u8 *edid_data; }; @@ -317,6 +319,17 @@ static void fsl_diu_free(void *virt, size_t size) free_pages_exact(virt, size); } +/* + * Workaround for failed writing desc register of planes. + * Needed with MPC5121 DIU rev 2.0 silicon. + */ +void wr_reg_wa(u32 *reg, u32 val) +{ + do { + out_be32(reg, val); + } while (in_be32(reg) != val); +} + static int fsl_diu_enable_panel(struct fb_info *info) { struct mfb_info *pmfbi, *cmfbi, *mfbi = info->par; @@ -330,7 +343,7 @@ static int fsl_diu_enable_panel(struct fb_info *info) switch (mfbi->index) { case 0: /* plane 0 */ if (hw->desc[0] != ad->paddr) - out_be32(&hw->desc[0], ad->paddr); + wr_reg_wa(&hw->desc[0], ad->paddr); break; case 1: /* plane 1 AOI 0 */ cmfbi = machine_data->fsl_diu_info[2]->par; @@ -340,7 +353,7 @@ static int fsl_diu_enable_panel(struct fb_info *info) cpu_to_le32(cmfbi->ad->paddr); else ad->next_ad = 0; - out_be32(&hw->desc[1], ad->paddr); + wr_reg_wa(&hw->desc[1], ad->paddr); } break; case 3: /* plane 2 AOI 0 */ @@ -351,14 +364,14 @@ static int fsl_diu_enable_panel(struct fb_info *info) cpu_to_le32(cmfbi->ad->paddr); else ad->next_ad = 0; - out_be32(&hw->desc[2], ad->paddr); + wr_reg_wa(&hw->desc[2], ad->paddr); } break; case 2: /* plane 1 AOI 1 */ pmfbi = machine_data->fsl_diu_info[1]->par; ad->next_ad = 0; if (hw->desc[1] == machine_data->dummy_ad->paddr) - out_be32(&hw->desc[1], ad->paddr); + wr_reg_wa(&hw->desc[1], ad->paddr); else /* AOI0 open */ pmfbi->ad->next_ad = cpu_to_le32(ad->paddr); break; @@ -366,7 +379,7 @@ static int fsl_diu_enable_panel(struct fb_info *info) pmfbi = machine_data->fsl_diu_info[3]->par; ad->next_ad = 0; if (hw->desc[2] == machine_data->dummy_ad->paddr) - out_be32(&hw->desc[2], ad->paddr); + wr_reg_wa(&hw->desc[2], ad->paddr); else /* AOI0 was open */ pmfbi->ad->next_ad = cpu_to_le32(ad->paddr); break; @@ -390,27 +403,24 @@ static int fsl_diu_disable_panel(struct fb_info *info) switch (mfbi->index) { case 0: /* plane 0 */ if (hw->desc[0] != machine_data->dummy_ad->paddr) - out_be32(&hw->desc[0], - machine_data->dummy_ad->paddr); + wr_reg_wa(&hw->desc[0], machine_data->dummy_ad->paddr); break; case 1: /* plane 1 AOI 0 */ cmfbi = machine_data->fsl_diu_info[2]->par; if (cmfbi->count > 0) /* AOI1 is open */ - out_be32(&hw->desc[1], cmfbi->ad->paddr); + wr_reg_wa(&hw->desc[1], cmfbi->ad->paddr); /* move AOI1 to the first */ else /* AOI1 was closed */ - out_be32(&hw->desc[1], - machine_data->dummy_ad->paddr); + wr_reg_wa(&hw->desc[1], machine_data->dummy_ad->paddr); /* close AOI 0 */ break; case 3: /* plane 2 AOI 0 */ cmfbi = machine_data->fsl_diu_info[4]->par; if (cmfbi->count > 0) /* AOI1 is open */ - out_be32(&hw->desc[2], cmfbi->ad->paddr); + wr_reg_wa(&hw->desc[2], cmfbi->ad->paddr); /* move AOI1 to the first */ else /* AOI1 was closed */ - out_be32(&hw->desc[2], - machine_data->dummy_ad->paddr); + wr_reg_wa(&hw->desc[2], machine_data->dummy_ad->paddr); /* close AOI 0 */ break; case 2: /* plane 1 AOI 1 */ @@ -421,7 +431,7 @@ static int fsl_diu_disable_panel(struct fb_info *info) /* AOI0 is open, must be the first */ pmfbi->ad->next_ad = 0; } else /* AOI1 is the first in the chain */ - out_be32(&hw->desc[1], machine_data->dummy_ad->paddr); + wr_reg_wa(&hw->desc[1], machine_data->dummy_ad->paddr); /* close AOI 1 */ break; case 4: /* plane 2 AOI 1 */ @@ -432,7 +442,7 @@ static int fsl_diu_disable_panel(struct fb_info *info) /* AOI0 is open, must be the first */ pmfbi->ad->next_ad = 0; } else /* AOI1 is the first in the chain */ - out_be32(&hw->desc[2], machine_data->dummy_ad->paddr); + wr_reg_wa(&hw->desc[2], machine_data->dummy_ad->paddr); /* close AOI 1 */ break; default: @@ -1100,6 +1110,10 @@ static int fsl_diu_open(struct fb_info *info, int user) struct mfb_info *mfbi = info->par; int res = 0; + /* free boot splash memory on first /dev/fb0 open */ + if (!mfbi->index && diu_ops.release_bootmem) + diu_ops.release_bootmem(); + spin_lock(&diu_lock); mfbi->count++; if (mfbi->count == 1) { @@ -1173,18 +1187,30 @@ static int __devinit install_fb(struct fb_info *info) int rc; struct mfb_info *mfbi = info->par; const char *aoi_mode, *init_aoi_mode = "320x240"; + struct fb_videomode *db = fsl_diu_mode_db; + unsigned int dbsize = ARRAY_SIZE(fsl_diu_mode_db); + int has_default_mode = 1; if (init_fbinfo(info)) return -EINVAL; - if (mfbi->index == 0) /* plane 0 */ + if (mfbi->index == 0) { /* plane 0 */ + if (mfbi->edid_data) { + /* Now build modedb from EDID */ + fb_edid_to_monspecs(mfbi->edid_data, &info->monspecs); + fb_videomode_to_modelist(info->monspecs.modedb, + info->monspecs.modedb_len, + &info->modelist); + db = info->monspecs.modedb; + dbsize = info->monspecs.modedb_len; + } aoi_mode = fb_mode; - else + } else { aoi_mode = init_aoi_mode; + } pr_debug("mode used = %s\n", aoi_mode); - rc = fb_find_mode(&info->var, info, aoi_mode, fsl_diu_mode_db, - ARRAY_SIZE(fsl_diu_mode_db), &fsl_diu_default_mode, default_bpp); - + rc = fb_find_mode(&info->var, info, aoi_mode, db, dbsize, + &fsl_diu_default_mode, default_bpp); switch (rc) { case 1: pr_debug("using mode specified in @mode\n"); @@ -1202,10 +1228,50 @@ static int __devinit install_fb(struct fb_info *info) default: pr_debug("rc = %d\n", rc); pr_debug("failed to find mode\n"); - return -EINVAL; + /* + * For plane 0 we continue and look into + * driver's internal modedb. + */ + if (mfbi->index == 0 && mfbi->edid_data) + has_default_mode = 0; + else + return -EINVAL; break; } + if (!has_default_mode) { + rc = fb_find_mode(&info->var, info, aoi_mode, fsl_diu_mode_db, + ARRAY_SIZE(fsl_diu_mode_db), + &fsl_diu_default_mode, + default_bpp); + if (rc > 0 && rc < 5) + has_default_mode = 1; + } + + /* Still not found, use preferred mode from database if any */ + if (!has_default_mode && info->monspecs.modedb) { + struct fb_monspecs *specs = &info->monspecs; + struct fb_videomode *modedb = &specs->modedb[0]; + + /* + * Get preferred timing. If not found, + * first mode in database will be used. + */ + if (specs->misc & FB_MISC_1ST_DETAIL) { + int i; + + for (i = 0; i < specs->modedb_len; i++) { + if (specs->modedb[i].flag & FB_MODE_IS_FIRST) { + modedb = &specs->modedb[i]; + break; + } + } + } + + info->var.bits_per_pixel = default_bpp; + fb_videomode_to_var(&info->var, modedb); + } + pr_debug("xres_virtual %d\n", info->var.xres_virtual); pr_debug("bits_per_pixel %d\n", info->var.bits_per_pixel); @@ -1244,6 +1310,9 @@ static void uninstall_fb(struct fb_info *info) if (!mfbi->registered) return; + if (mfbi->index == 0) + kfree(mfbi->edid_data); + unregister_framebuffer(info); unmap_video_memory(info); if (&info->cmap) @@ -1427,6 +1496,7 @@ static int __devinit fsl_diu_probe(struct of_device *ofdev, int ret, i, error = 0; struct resource res; struct fsl_diu_data *machine_data; + int diu_mode; machine_data = kzalloc(sizeof(struct fsl_diu_data), GFP_KERNEL); if (!machine_data) @@ -1443,6 +1513,17 @@ static int __devinit fsl_diu_probe(struct of_device *ofdev, mfbi = machine_data->fsl_diu_info[i]->par; memcpy(mfbi, &mfb_template[i], sizeof(struct mfb_info)); mfbi->parent = machine_data; + + if (mfbi->index == 0) { + const u8 *prop; + int len; + + /* Get EDID */ + prop = of_get_property(np, "edid", &len); + if (prop && len == EDID_LENGTH) + mfbi->edid_data = kmemdup(prop, EDID_LENGTH, + GFP_KERNEL); + } } ret = of_address_to_resource(np, 0, &res); @@ -1463,7 +1544,9 @@ static int __devinit fsl_diu_probe(struct of_device *ofdev, goto error2; } - out_be32(&dr.diu_reg->diu_mode, 0); /* disable DIU anyway*/ + diu_mode = in_be32(&dr.diu_reg->diu_mode); + if (diu_mode != MFB_MODE1) + out_be32(&dr.diu_reg->diu_mode, 0); /* disable DIU */ /* Get the IRQ of the DIU */ machine_data->irq = irq_of_parse_and_map(np, 0); @@ -1511,7 +1594,13 @@ static int __devinit fsl_diu_probe(struct of_device *ofdev, machine_data->dummy_ad->offset_xyd = 0; machine_data->dummy_ad->next_ad = 0; - out_be32(&dr.diu_reg->desc[0], machine_data->dummy_ad->paddr); + /* + * Let DIU display splash screen if it was pre-initialized + * by the bootloader, set dummy area descriptor otherwise. + */ + if (diu_mode != MFB_MODE1) + out_be32(&dr.diu_reg->desc[0], machine_data->dummy_ad->paddr); + out_be32(&dr.diu_reg->desc[1], machine_data->dummy_ad->paddr); out_be32(&dr.diu_reg->desc[2], machine_data->dummy_ad->paddr); diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c index 574dc54..29b5daa 100644 --- a/drivers/video/xilinxfb.c +++ b/drivers/video/xilinxfb.c @@ -485,6 +485,8 @@ static int __devexit xilinxfb_of_remove(struct of_device *op) /* Match table for of_platform binding */ static struct of_device_id xilinxfb_of_match[] __devinitdata = { { .compatible = "xlnx,xps-tft-1.00.a", }, + { .compatible = "xlnx,xps-tft-2.00.a", }, + { .compatible = "xlnx,xps-tft-2.01.a", }, { .compatible = "xlnx,plb-tft-cntlr-ref-1.00.a", }, { .compatible = "xlnx,plb-dvi-cntlr-ref-1.00.c", }, {}, diff --git a/drivers/video/fsl-diu-fb.h b/include/linux/fsl-diu-fb.h index fc295d7..fc295d7 100644 --- a/drivers/video/fsl-diu-fb.h +++ b/include/linux/fsl-diu-fb.h diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index e69612c..3314540 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2264,6 +2264,7 @@ #define PCI_DEVICE_ID_TDI_EHCI 0x0101 #define PCI_VENDOR_ID_FREESCALE 0x1957 +#define PCI_DEVICE_ID_MPC8308 0xc006 #define PCI_DEVICE_ID_MPC8315E 0x00b4 #define PCI_DEVICE_ID_MPC8315 0x00b5 #define PCI_DEVICE_ID_MPC8314E 0x00b6 diff --git a/kernel/hw_breakpoint.c b/kernel/hw_breakpoint.c index 7a56b22..71ed3ce 100644 --- a/kernel/hw_breakpoint.c +++ b/kernel/hw_breakpoint.c @@ -242,6 +242,17 @@ toggle_bp_slot(struct perf_event *bp, bool enable, enum bp_type_idx type, } /* + * Function to perform processor-specific cleanup during unregistration + */ +__weak void arch_unregister_hw_breakpoint(struct perf_event *bp) +{ + /* + * A weak stub function here for those archs that don't define + * it inside arch/.../kernel/hw_breakpoint.c + */ +} + +/* * Contraints to check before allowing this new breakpoint counter: * * == Non-pinned counter == (Considered as pinned for now) @@ -339,6 +350,7 @@ void release_bp_slot(struct perf_event *bp) { mutex_lock(&nr_bp_mutex); + arch_unregister_hw_breakpoint(bp); __release_bp_slot(bp); mutex_unlock(&nr_bp_mutex); |