diff options
| -rw-r--r-- | sound/soc/codecs/tas5086.c | 128 |
1 files changed, 72 insertions, 56 deletions
diff --git a/sound/soc/codecs/tas5086.c b/sound/soc/codecs/tas5086.c index 31b5868..3a88c68 100644 --- a/sound/soc/codecs/tas5086.c +++ b/sound/soc/codecs/tas5086.c @@ -458,6 +458,75 @@ static int tas5086_mute_stream(struct snd_soc_dai *dai, int mute, int stream) return regmap_write(priv->regmap, TAS5086_SOFT_MUTE, val); } +static void tas5086_reset(struct tas5086_private *priv) +{ + if (gpio_is_valid(priv->gpio_nreset)) { + /* Reset codec - minimum assertion time is 400ns */ + gpio_direction_output(priv->gpio_nreset, 0); + udelay(1); + gpio_set_value(priv->gpio_nreset, 1); + + /* Codec needs ~15ms to wake up */ + msleep(15); + } +} + +/* charge period values in microseconds */ +static const int tas5086_charge_period[] = { + 13000, 16900, 23400, 31200, 41600, 54600, 72800, 96200, + 130000, 156000, 234000, 312000, 416000, 546000, 728000, 962000, + 1300000, 169000, 2340000, 3120000, 4160000, 5460000, 7280000, 9620000, +}; + +static int tas5086_init(struct device *dev, struct tas5086_private *priv) +{ + int ret, i; + + /* + * If any of the channels is configured to start in Mid-Z mode, + * configure 'part 1' of the PWM starts to use Mid-Z, and tell + * all configured mid-z channels to start start under 'part 1'. + */ + if (priv->pwm_start_mid_z) + regmap_write(priv->regmap, TAS5086_PWM_START, + TAS5086_PWM_START_MIDZ_FOR_START_1 | + priv->pwm_start_mid_z); + + /* lookup and set split-capacitor charge period */ + if (priv->charge_period == 0) { + regmap_write(priv->regmap, TAS5086_SPLIT_CAP_CHARGE, 0); + } else { + i = index_in_array(tas5086_charge_period, + ARRAY_SIZE(tas5086_charge_period), + priv->charge_period); + if (i >= 0) + regmap_write(priv->regmap, TAS5086_SPLIT_CAP_CHARGE, + i + 0x08); + else + dev_warn(dev, + "Invalid split-cap charge period of %d ns.\n", + priv->charge_period); + } + + /* enable factory trim */ + ret = regmap_write(priv->regmap, TAS5086_OSC_TRIM, 0x00); + if (ret < 0) + return ret; + + /* start all channels */ + ret = regmap_write(priv->regmap, TAS5086_SYS_CONTROL_2, 0x20); + if (ret < 0) + return ret; + + /* mute all channels for now */ + ret = regmap_write(priv->regmap, TAS5086_SOFT_MUTE, + TAS5086_SOFT_MUTE_ALL); + if (ret < 0) + return ret; + + return 0; +} + /* TAS5086 controls */ static const DECLARE_TLV_DB_SCALE(tas5086_dac_tlv, -10350, 50, 1); @@ -712,13 +781,6 @@ static const struct of_device_id tas5086_dt_ids[] = { MODULE_DEVICE_TABLE(of, tas5086_dt_ids); #endif -/* charge period values in microseconds */ -static const int tas5086_charge_period[] = { - 13000, 16900, 23400, 31200, 41600, 54600, 72800, 96200, - 130000, 156000, 234000, 312000, 416000, 546000, 728000, 962000, - 1300000, 169000, 2340000, 3120000, 4160000, 5460000, 7280000, 9620000, -}; - static int tas5086_probe(struct snd_soc_codec *codec) { struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); @@ -729,6 +791,7 @@ static int tas5086_probe(struct snd_soc_codec *codec) if (of_match_device(of_match_ptr(tas5086_dt_ids), codec->dev)) { struct device_node *of_node = codec->dev->of_node; + of_property_read_u32(of_node, "ti,charge-period", &priv->charge_period); @@ -743,39 +806,7 @@ static int tas5086_probe(struct snd_soc_codec *codec) } } - /* - * If any of the channels is configured to start in Mid-Z mode, - * configure 'part 1' of the PWM starts to use Mid-Z, and tell - * all configured mid-z channels to start start under 'part 1'. - */ - if (priv->pwm_start_mid_z) - regmap_write(priv->regmap, TAS5086_PWM_START, - TAS5086_PWM_START_MIDZ_FOR_START_1 | - priv->pwm_start_mid_z); - - /* lookup and set split-capacitor charge period */ - if (priv->charge_period == 0) { - regmap_write(priv->regmap, TAS5086_SPLIT_CAP_CHARGE, 0); - } else { - i = index_in_array(tas5086_charge_period, - ARRAY_SIZE(tas5086_charge_period), - priv->charge_period); - if (i >= 0) - regmap_write(priv->regmap, TAS5086_SPLIT_CAP_CHARGE, - i + 0x08); - else - dev_warn(codec->dev, - "Invalid split-cap charge period of %d ns.\n", - priv->charge_period); - } - - /* enable factory trim */ - ret = regmap_write(priv->regmap, TAS5086_OSC_TRIM, 0x00); - if (ret < 0) - return ret; - - /* start all channels */ - ret = regmap_write(priv->regmap, TAS5086_SYS_CONTROL_2, 0x20); + ret = tas5086_init(codec->dev, priv); if (ret < 0) return ret; @@ -784,12 +815,6 @@ static int tas5086_probe(struct snd_soc_codec *codec) if (ret < 0) return ret; - /* mute all channels for now */ - ret = regmap_write(priv->regmap, TAS5086_SOFT_MUTE, - TAS5086_SOFT_MUTE_ALL); - if (ret < 0) - return ret; - return 0; } @@ -866,17 +891,8 @@ static int tas5086_i2c_probe(struct i2c_client *i2c, if (devm_gpio_request(dev, gpio_nreset, "TAS5086 Reset")) gpio_nreset = -EINVAL; - if (gpio_is_valid(gpio_nreset)) { - /* Reset codec - minimum assertion time is 400ns */ - gpio_direction_output(gpio_nreset, 0); - udelay(1); - gpio_set_value(gpio_nreset, 1); - - /* Codec needs ~15ms to wake up */ - msleep(15); - } - priv->gpio_nreset = gpio_nreset; + tas5086_reset(priv); /* The TAS5086 always returns 0x03 in its TAS5086_DEV_ID register */ ret = regmap_read(priv->regmap, TAS5086_DEV_ID, &i); |