diff options
Diffstat (limited to 'arch/arm/boot/dts')
52 files changed, 1213 insertions, 914 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index af19e38..1d94303 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -101,6 +101,7 @@ dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \ dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \ armada-370-mirabox.dtb \ armada-370-rd.dtb \ + armada-xp-axpwifiap.dtb \ armada-xp-db.dtb \ armada-xp-gp.dtb \ armada-xp-openblocks-ax3-4.dtb diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index beee169..90ce29d 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -14,7 +14,7 @@ */ /dts-v1/; -/include/ "armada-370.dtsi" +#include "armada-370.dtsi" / { model = "Marvell Armada 370 Evaluation Board"; @@ -30,6 +30,9 @@ }; soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000 + MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>; + internal-regs { serial@12000 { clock-frequency = <200000000>; diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts index 45b1077..2471d9d 100644 --- a/arch/arm/boot/dts/armada-370-mirabox.dts +++ b/arch/arm/boot/dts/armada-370-mirabox.dts @@ -9,7 +9,7 @@ */ /dts-v1/; -/include/ "armada-370.dtsi" +#include "armada-370.dtsi" / { model = "Globalscale Mirabox"; @@ -25,6 +25,25 @@ }; soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000 + MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>; + + pcie-controller { + status = "okay"; + + /* Internal mini-PCIe connector */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* Connected on the PCB to a USB 3.0 XHCI controller */ + pcie@2,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; + }; + internal-regs { serial@12000 { clock-frequency = <200000000>; @@ -120,22 +139,6 @@ reg = <0x25>; }; }; - - pcie-controller { - status = "okay"; - - /* Internal mini-PCIe connector */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - - /* Connected on the PCB to a USB 3.0 XHCI controller */ - pcie@2,0 { - /* Port 1, Lane 0 */ - status = "okay"; - }; - }; }; }; }; diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts index a3a2fed..f81810a 100644 --- a/arch/arm/boot/dts/armada-370-rd.dts +++ b/arch/arm/boot/dts/armada-370-rd.dts @@ -12,7 +12,7 @@ */ /dts-v1/; -/include/ "armada-370.dtsi" +#include "armada-370.dtsi" / { model = "Marvell Armada 370 Reference Design"; @@ -28,6 +28,25 @@ }; soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000 + MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>; + + pcie-controller { + status = "okay"; + + /* Internal mini-PCIe connector */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* Internal mini-PCIe connector */ + pcie@2,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; + }; + internal-regs { serial@12000 { clock-frequency = <200000000>; @@ -85,22 +104,6 @@ gpios = <&gpio0 6 1>; }; }; - - pcie-controller { - status = "okay"; - - /* Internal mini-PCIe connector */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - - /* Internal mini-PCIe connector */ - pcie@2,0 { - /* Port 1, Lane 0 */ - status = "okay"; - }; - }; }; }; }; diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 90b1176..e984ce6 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -18,6 +18,8 @@ /include/ "skeleton64.dtsi" +#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) + / { model = "Marvell Armada 370 and XP SoC"; compatible = "marvell,armada-370-xp"; @@ -38,18 +40,73 @@ }; soc { - #address-cells = <1>; + #address-cells = <2>; #size-cells = <1>; - compatible = "simple-bus"; + controller = <&mbusc>; interrupt-parent = <&mpic>; - ranges = <0 0 0xd0000000 0x0100000 /* internal registers */ - 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */>; + pcie-mem-aperture = <0xe0000000 0x8000000>; + pcie-io-aperture = <0xe8000000 0x100000>; + + devbus-bootcs { + compatible = "marvell,mvebu-devbus"; + reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>; + ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + devbus-cs0 { + compatible = "marvell,mvebu-devbus"; + reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>; + ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + devbus-cs1 { + compatible = "marvell,mvebu-devbus"; + reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>; + ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + devbus-cs2 { + compatible = "marvell,mvebu-devbus"; + reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>; + ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + devbus-cs3 { + compatible = "marvell,mvebu-devbus"; + reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>; + ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&coreclk 0>; + status = "disabled"; + }; internal-regs { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>; + + mbusc: mbus-controller@20000 { + compatible = "marvell,mbus-controller"; + reg = <0x20000 0x100>, <0x20180 0x20>; + }; mpic: interrupt-controller@20000 { compatible = "marvell,mpic"; @@ -195,50 +252,6 @@ status = "disabled"; }; - devbus-bootcs@10400 { - compatible = "marvell,mvebu-devbus"; - reg = <0x10400 0x8>; - #address-cells = <1>; - #size-cells = <1>; - clocks = <&coreclk 0>; - status = "disabled"; - }; - - devbus-cs0@10408 { - compatible = "marvell,mvebu-devbus"; - reg = <0x10408 0x8>; - #address-cells = <1>; - #size-cells = <1>; - clocks = <&coreclk 0>; - status = "disabled"; - }; - - devbus-cs1@10410 { - compatible = "marvell,mvebu-devbus"; - reg = <0x10410 0x8>; - #address-cells = <1>; - #size-cells = <1>; - clocks = <&coreclk 0>; - status = "disabled"; - }; - - devbus-cs2@10418 { - compatible = "marvell,mvebu-devbus"; - reg = <0x10418 0x8>; - #address-cells = <1>; - #size-cells = <1>; - clocks = <&coreclk 0>; - status = "disabled"; - }; - - devbus-cs3@10420 { - compatible = "marvell,mvebu-devbus"; - reg = <0x10420 0x8>; - #address-cells = <1>; - #size-cells = <1>; - clocks = <&coreclk 0>; - status = "disabled"; - }; }; }; }; diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index fa3dfc6..648e530 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -15,7 +15,7 @@ * common to all Armada SoCs. */ -/include/ "armada-370-xp.dtsi" +#include "armada-370-xp.dtsi" /include/ "skeleton.dtsi" / { @@ -29,8 +29,66 @@ }; soc { - ranges = <0 0xd0000000 0x0100000 /* internal registers */ - 0xe0000000 0xe0000000 0x8100000 /* PCIe */>; + compatible = "marvell,armada370-mbus", "simple-bus"; + + bootrom { + compatible = "marvell,bootrom"; + reg = <MBUS_ID(0x01, 0xe0) 0 0x100000>; + }; + + pcie-controller { + compatible = "marvell,armada-370-pcie"; + status = "disabled"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + bus-range = <0x00 0xff>; + + ranges = + <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 + 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 + 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ + 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ + 0x82000000 0x2 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ + 0x81000000 0x2 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */>; + + pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 + 0x81000000 0 0 0x81000000 0x1 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 58>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 5>; + status = "disabled"; + }; + + pcie@2,0 { + device_type = "pci"; + assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 + 0x81000000 0 0 0x81000000 0x2 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 62>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 9>; + status = "disabled"; + }; + }; + internal-regs { system-controller@18200 { compatible = "marvell,armada-370-xp-system-controller"; @@ -169,54 +227,6 @@ 0x18304 0x4>; status = "okay"; }; - - pcie-controller { - compatible = "marvell,armada-370-pcie"; - status = "disabled"; - device_type = "pci"; - - #address-cells = <3>; - #size-cells = <2>; - - bus-range = <0x00 0xff>; - - ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */ - 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */ - 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ - 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ - - pcie@1,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 58>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 5>; - status = "disabled"; - }; - - pcie@2,0 { - device_type = "pci"; - assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; - reg = <0x1000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 62>; - marvell,pcie-port = <1>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 9>; - status = "disabled"; - }; - }; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts new file mode 100644 index 0000000..c5fe572 --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts @@ -0,0 +1,164 @@ +/* + * Device Tree file for Marvell RD-AXPWiFiAP. + * + * Note: this board is shipped with a new generation boot loader that + * remaps internal registers at 0xf1000000. Therefore, if earlyprintk + * is used, the CONFIG_DEBUG_MVEBU_UART_ALTERNATE option should be + * used. + * + * Copyright (C) 2013 Marvell + * + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; +#include "armada-xp-mv78230.dtsi" + +/ { + model = "Marvell RD-AXPWiFiAP"; + compatible = "marvell,rd-axpwifiap", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x40000000>; /* 1GB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>; + + pcie-controller { + status = "okay"; + + /* First mini-PCIe port */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* Second mini-PCIe port */ + pcie@2,0 { + /* Port 0, Lane 1 */ + status = "okay"; + }; + + /* Renesas uPD720202 USB 3.0 controller */ + pcie@3,0 { + /* Port 0, Lane 3 */ + status = "okay"; + }; + }; + + internal-regs { + pinctrl { + pinctrl-0 = <&pmx_phy_int>; + pinctrl-names = "default"; + + pmx_ge0: pmx-ge0 { + marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", + "mpp4", "mpp5", "mpp6", "mpp7", + "mpp8", "mpp9", "mpp10", "mpp11"; + marvell,function = "ge0"; + }; + + pmx_ge1: pmx-ge1 { + marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", + "mpp16", "mpp17", "mpp18", "mpp19", + "mpp20", "mpp21", "mpp22", "mpp23"; + marvell,function = "ge1"; + }; + + pmx_keys: pmx-keys { + marvell,pins = "mpp33"; + marvell,function = "gpio"; + }; + + pmx_spi: pmx-spi { + marvell,pins = "mpp36", "mpp37", "mpp38", "mpp39"; + marvell,function = "spi"; + }; + + pmx_phy_int: pmx-phy-int { + marvell,pins = "mpp32"; + marvell,function = "gpio"; + }; + }; + + serial@12000 { + clock-frequency = <250000000>; + status = "okay"; + }; + + serial@12100 { + clock-frequency = <250000000>; + status = "okay"; + }; + + sata@a0000 { + nr-ports = <1>; + status = "okay"; + }; + + mdio { + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + + ethernet@70000 { + pinctrl-0 = <&pmx_ge0>; + pinctrl-names = "default"; + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + ethernet@74000 { + pinctrl-0 = <&pmx_ge1>; + pinctrl-names = "default"; + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; + }; + + spi0: spi@10600 { + status = "okay"; + pinctrl-0 = <&pmx_spi>; + pinctrl-names = "default"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q128a13"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <108000000>; + }; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_keys>; + pinctrl-names = "default"; + + button@1 { + label = "Factory Reset Button"; + linux,code = <141>; /* KEY_SETUP */ + gpios = <&gpio1 1 1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts index e28e68f..bcf6d79 100644 --- a/arch/arm/boot/dts/armada-xp-db.dts +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -14,7 +14,7 @@ */ /dts-v1/; -/include/ "armada-xp-mv78460.dtsi" +#include "armada-xp-mv78460.dtsi" / { model = "Marvell Armada XP Evaluation Board"; @@ -30,9 +30,70 @@ }; soc { - ranges = <0 0 0xd0000000 0x100000 /* Internal registers 1MiB */ - 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */ - 0xf0000000 0 0xf0000000 0x1000000>; /* Device Bus, NOR 16MiB */ + ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 + MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>; + + devbus-bootcs { + status = "okay"; + + /* Device Bus parameters are required */ + + /* Read parameters */ + devbus,bus-width = <8>; + devbus,turn-off-ps = <60000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <124000>; + devbus,acc-next-ps = <248000>; + devbus,rd-setup-ps = <0>; + devbus,rd-hold-ps = <0>; + + /* Write parameters */ + devbus,sync-enable = <0>; + devbus,wr-high-ps = <60000>; + devbus,wr-low-ps = <60000>; + devbus,ale-wr-ps = <60000>; + + /* NOR 16 MiB */ + nor@0 { + compatible = "cfi-flash"; + reg = <0 0x1000000>; + bank-width = <2>; + }; + }; + + pcie-controller { + status = "okay"; + + /* + * All 6 slots are physically present as + * standard PCIe slots on the board. + */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + pcie@2,0 { + /* Port 0, Lane 1 */ + status = "okay"; + }; + pcie@3,0 { + /* Port 0, Lane 2 */ + status = "okay"; + }; + pcie@4,0 { + /* Port 0, Lane 3 */ + status = "okay"; + }; + pcie@9,0 { + /* Port 2, Lane 0 */ + status = "okay"; + }; + pcie@10,0 { + /* Port 3, Lane 0 */ + status = "okay"; + }; + }; internal-regs { serial@12000 { @@ -127,68 +188,6 @@ spi-max-frequency = <20000000>; }; }; - - pcie-controller { - status = "okay"; - - /* - * All 6 slots are physically present as - * standard PCIe slots on the board. - */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - pcie@2,0 { - /* Port 0, Lane 1 */ - status = "okay"; - }; - pcie@3,0 { - /* Port 0, Lane 2 */ - status = "okay"; - }; - pcie@4,0 { - /* Port 0, Lane 3 */ - status = "okay"; - }; - pcie@9,0 { - /* Port 2, Lane 0 */ - status = "okay"; - }; - pcie@10,0 { - /* Port 3, Lane 0 */ - status = "okay"; - }; - }; - - devbus-bootcs@10400 { - status = "okay"; - ranges = <0 0xf0000000 0x1000000>; - - /* Device Bus parameters are required */ - - /* Read parameters */ - devbus,bus-width = <8>; - devbus,turn-off-ps = <60000>; - devbus,badr-skew-ps = <0>; - devbus,acc-first-ps = <124000>; - devbus,acc-next-ps = <248000>; - devbus,rd-setup-ps = <0>; - devbus,rd-hold-ps = <0>; - - /* Write parameters */ - devbus,sync-enable = <0>; - devbus,wr-high-ps = <60000>; - devbus,wr-low-ps = <60000>; - devbus,ale-wr-ps = <60000>; - - /* NOR 16 MiB */ - nor@0 { - compatible = "cfi-flash"; - reg = <0 0x1000000>; - bank-width = <2>; - }; - }; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index c87b2de..2298e4a 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -14,7 +14,7 @@ */ /dts-v1/; -/include/ "armada-xp-mv78460.dtsi" +#include "armada-xp-mv78460.dtsi" / { model = "Marvell Armada XP Development Board DB-MV784MP-GP"; @@ -39,9 +39,58 @@ }; soc { - ranges = <0 0 0xd0000000 0x100000 /* Internal registers 1MiB */ - 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */ - 0xf0000000 0 0xf0000000 0x1000000 /* Device Bus, NOR 16MiB */>; + ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 + MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>; + + devbus-bootcs { + status = "okay"; + + /* Device Bus parameters are required */ + + /* Read parameters */ + devbus,bus-width = <8>; + devbus,turn-off-ps = <60000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <124000>; + devbus,acc-next-ps = <248000>; + devbus,rd-setup-ps = <0>; + devbus,rd-hold-ps = <0>; + + /* Write parameters */ + devbus,sync-enable = <0>; + devbus,wr-high-ps = <60000>; + devbus,wr-low-ps = <60000>; + devbus,ale-wr-ps = <60000>; + + /* NOR 16 MiB */ + nor@0 { + compatible = "cfi-flash"; + reg = <0 0x1000000>; + bank-width = <2>; + }; + }; + + pcie-controller { + status = "okay"; + + /* + * The 3 slots are physically present as + * standard PCIe slots on the board. + */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + pcie@9,0 { + /* Port 2, Lane 0 */ + status = "okay"; + }; + pcie@10,0 { + /* Port 3, Lane 0 */ + status = "okay"; + }; + }; internal-regs { serial@12000 { @@ -126,56 +175,6 @@ spi-max-frequency = <108000000>; }; }; - - devbus-bootcs@10400 { - status = "okay"; - ranges = <0 0xf0000000 0x1000000>; /* @addr 0xf000000, size 0x1000000 */ - - /* Device Bus parameters are required */ - - /* Read parameters */ - devbus,bus-width = <8>; - devbus,turn-off-ps = <60000>; - devbus,badr-skew-ps = <0>; - devbus,acc-first-ps = <124000>; - devbus,acc-next-ps = <248000>; - devbus,rd-setup-ps = <0>; - devbus,rd-hold-ps = <0>; - - /* Write parameters */ - devbus,sync-enable = <0>; - devbus,wr-high-ps = <60000>; - devbus,wr-low-ps = <60000>; - devbus,ale-wr-ps = <60000>; - - /* NOR 16 MiB */ - nor@0 { - compatible = "cfi-flash"; - reg = <0 0x1000000>; - bank-width = <2>; - }; - }; - - pcie-controller { - status = "okay"; - - /* - * The 3 slots are physically present as - * standard PCIe slots on the board. - */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - pcie@9,0 { - /* Port 2, Lane 0 */ - status = "okay"; - }; - pcie@10,0 { - /* Port 3, Lane 0 */ - status = "okay"; - }; - }; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index f8eaa38..e45e363 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -13,7 +13,7 @@ * common to all Armada XP SoCs. */ -/include/ "armada-xp.dtsi" +#include "armada-xp.dtsi" / { model = "Marvell Armada XP MV78230 SoC"; @@ -44,6 +44,124 @@ }; soc { + /* + * MV78230 has 2 PCIe units Gen2.0: One unit can be + * configured as x4 or quad x1 lanes. One unit is + * x4/x1. + */ + pcie-controller { + compatible = "marvell,armada-xp-pcie"; + status = "disabled"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + bus-range = <0x00 0xff>; + + ranges = + <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ + 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */ + 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */ + 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ + 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ + 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ + 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ + 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */ + 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO */ + 0x82000000 0x3 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */ + 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */ + 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */ + 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */ + 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */ + 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */>; + + pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 + 0x81000000 0 0 0x81000000 0x1 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 58>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 5>; + status = "disabled"; + }; + + pcie@2,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 + 0x81000000 0 0 0x81000000 0x2 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 59>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <1>; + clocks = <&gateclk 6>; + status = "disabled"; + }; + + pcie@3,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; + reg = <0x1800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 + 0x81000000 0 0 0x81000000 0x3 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 60>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <2>; + clocks = <&gateclk 7>; + status = "disabled"; + }; + + pcie@4,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>; + reg = <0x2000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 + 0x81000000 0 0 0x81000000 0x4 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 61>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <3>; + clocks = <&gateclk 8>; + status = "disabled"; + }; + + pcie@9,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; + reg = <0x4800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 + 0x81000000 0 0 0x81000000 0x9 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 99>; + marvell,pcie-port = <2>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 26>; + status = "disabled"; + }; + }; + internal-regs { pinctrl { compatible = "marvell,mv78230-pinctrl"; @@ -77,110 +195,6 @@ #interrupts-cells = <2>; interrupts = <87>, <88>, <89>; }; - - /* - * MV78230 has 2 PCIe units Gen2.0: One unit can be - * configured as x4 or quad x1 lanes. One unit is - * x4/x1. - */ - pcie-controller { - compatible = "marvell,armada-xp-pcie"; - status = "disabled"; - device_type = "pci"; - -#address-cells = <3>; -#size-cells = <2>; - - bus-range = <0x00 0xff>; - - ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */ - 0x82000000 0 0x42000 0x42000 0 0x00002000 /* Port 2.0 registers */ - 0x82000000 0 0x44000 0x44000 0 0x00002000 /* Port 0.1 registers */ - 0x82000000 0 0x48000 0x48000 0 0x00002000 /* Port 0.2 registers */ - 0x82000000 0 0x4c000 0x4c000 0 0x00002000 /* Port 0.3 registers */ - 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ - 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ - - pcie@1,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 58>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 5>; - status = "disabled"; - }; - - pcie@2,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; - reg = <0x1000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 59>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <1>; - clocks = <&gateclk 6>; - status = "disabled"; - }; - - pcie@3,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; - reg = <0x1800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 60>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <2>; - clocks = <&gateclk 7>; - status = "disabled"; - }; - - pcie@4,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>; - reg = <0x2000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 61>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <3>; - clocks = <&gateclk 8>; - status = "disabled"; - }; - - pcie@9,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; - reg = <0x4800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 99>; - marvell,pcie-port = <2>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 26>; - status = "disabled"; - }; - }; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 2d9335d..6dc3921 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -13,7 +13,7 @@ * common to all Armada XP SoCs. */ -/include/ "armada-xp.dtsi" +#include "armada-xp.dtsi" / { model = "Marvell Armada XP MV78260 SoC"; @@ -45,6 +45,145 @@ }; soc { + /* + * MV78260 has 3 PCIe units Gen2.0: Two units can be + * configured as x4 or quad x1 lanes. One unit is + * x4/x1. + */ + pcie-controller { + compatible = "marvell,armada-xp-pcie"; + status = "disabled"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + bus-range = <0x00 0xff>; + + ranges = + <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ + 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */ + 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */ + 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ + 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ + 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */ + 0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000 /* Port 3.0 registers */ + 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ + 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ + 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */ + 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO */ + 0x82000000 0x3 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */ + 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */ + 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */ + 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */ + 0x82000000 0x9 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ + 0x81000000 0x9 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */ + 0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */ + 0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>; + + pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 + 0x81000000 0 0 0x81000000 0x1 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 58>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 5>; + status = "disabled"; + }; + + pcie@2,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 + 0x81000000 0 0 0x81000000 0x2 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 59>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <1>; + clocks = <&gateclk 6>; + status = "disabled"; + }; + + pcie@3,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; + reg = <0x1800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 + 0x81000000 0 0 0x81000000 0x3 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 60>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <2>; + clocks = <&gateclk 7>; + status = "disabled"; + }; + + pcie@4,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>; + reg = <0x2000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 + 0x81000000 0 0 0x81000000 0x4 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 61>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <3>; + clocks = <&gateclk 8>; + status = "disabled"; + }; + + pcie@9,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; + reg = <0x4800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 + 0x81000000 0 0 0x81000000 0x9 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 99>; + marvell,pcie-port = <2>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 26>; + status = "disabled"; + }; + + pcie@10,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x82000 0 0x2000>; + reg = <0x5000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0 + 0x81000000 0 0 0x81000000 0xa 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 103>; + marvell,pcie-port = <3>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 27>; + status = "disabled"; + }; + }; + internal-regs { pinctrl { compatible = "marvell,mv78260-pinctrl"; @@ -97,128 +236,6 @@ clocks = <&gateclk 1>; status = "disabled"; }; - - /* - * MV78260 has 3 PCIe units Gen2.0: Two units can be - * configured as x4 or quad x1 lanes. One unit is - * x4/x1. - */ - pcie-controller { - compatible = "marvell,armada-xp-pcie"; - status = "disabled"; - device_type = "pci"; - - #address-cells = <3>; - #size-cells = <2>; - - bus-range = <0x00 0xff>; - - ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */ - 0x82000000 0 0x42000 0x42000 0 0x00002000 /* Port 2.0 registers */ - 0x82000000 0 0x44000 0x44000 0 0x00002000 /* Port 0.1 registers */ - 0x82000000 0 0x48000 0x48000 0 0x00002000 /* Port 0.2 registers */ - 0x82000000 0 0x4c000 0x4c000 0 0x00002000 /* Port 0.3 registers */ - 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */ - 0x82000000 0 0x82000 0x82000 0 0x00002000 /* Port 3.0 registers */ - 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ - 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ - - pcie@1,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 58>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 5>; - status = "disabled"; - }; - - pcie@2,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; - reg = <0x1000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 59>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <1>; - clocks = <&gateclk 6>; - status = "disabled"; - }; - - pcie@3,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; - reg = <0x1800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 60>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <2>; - clocks = <&gateclk 7>; - status = "disabled"; - }; - - pcie@4,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>; - reg = <0x2000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 61>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <3>; - clocks = <&gateclk 8>; - status = "disabled"; - }; - - pcie@9,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; - reg = <0x4800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 99>; - marvell,pcie-port = <2>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 26>; - status = "disabled"; - }; - - pcie@10,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x82000 0 0x2000>; - reg = <0x5000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 103>; - marvell,pcie-port = <3>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 27>; - status = "disabled"; - }; - }; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi index c7b1f4d..a6661e3 100644 --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -13,7 +13,7 @@ * common to all Armada XP SoCs. */ -/include/ "armada-xp.dtsi" +#include "armada-xp.dtsi" / { model = "Marvell Armada XP MV78460 SoC"; @@ -61,6 +61,227 @@ }; soc { + /* + * MV78460 has 4 PCIe units Gen2.0: Two units can be + * configured as x4 or quad x1 lanes. Two units are + * x4/x1. + */ + pcie-controller { + compatible = "marvell,armada-xp-pcie"; + status = "disabled"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + bus-range = <0x00 0xff>; + + ranges = + <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ + 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */ + 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */ + 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ + 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ + 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */ + 0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000 /* Port 3.0 registers */ + 0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000 /* Port 1.1 registers */ + 0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000 /* Port 1.2 registers */ + 0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000 /* Port 1.3 registers */ + 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ + 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ + 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */ + 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO */ + 0x82000000 0x3 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */ + 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */ + 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */ + 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */ + + 0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ + 0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */ + 0x82000000 0x6 0 MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */ + 0x81000000 0x6 0 MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO */ + 0x82000000 0x7 0 MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */ + 0x81000000 0x7 0 MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO */ + 0x82000000 0x8 0 MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */ + 0x81000000 0x8 0 MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO */ + + 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */ + 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */ + + 0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */ + 0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>; + + pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 + 0x81000000 0 0 0x81000000 0x1 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 58>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 5>; + status = "disabled"; + }; + + pcie@2,0 { + device_type = "pci"; + assigned-addresses = <0x82001000 0 0x44000 0 0x2000>; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 + 0x81000000 0 0 0x81000000 0x2 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 59>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <1>; + clocks = <&gateclk 6>; + status = "disabled"; + }; + + pcie@3,0 { + device_type = "pci"; + assigned-addresses = <0x82001800 0 0x48000 0 0x2000>; + reg = <0x1800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 + 0x81000000 0 0 0x81000000 0x3 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 60>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <2>; + clocks = <&gateclk 7>; + status = "disabled"; + }; + + pcie@4,0 { + device_type = "pci"; + assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>; + reg = <0x2000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 + 0x81000000 0 0 0x81000000 0x4 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 61>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <3>; + clocks = <&gateclk 8>; + status = "disabled"; + }; + + pcie@5,0 { + device_type = "pci"; + assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; + reg = <0x2800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0 + 0x81000000 0 0 0x81000000 0x5 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 62>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 9>; + status = "disabled"; + }; + + pcie@6,0 { + device_type = "pci"; + assigned-addresses = <0x82003000 0 0x84000 0 0x2000>; + reg = <0x3000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0 + 0x81000000 0 0 0x81000000 0x6 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 63>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <1>; + clocks = <&gateclk 10>; + status = "disabled"; + }; + + pcie@7,0 { + device_type = "pci"; + assigned-addresses = <0x82003800 0 0x88000 0 0x2000>; + reg = <0x3800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0 + 0x81000000 0 0 0x81000000 0x7 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 64>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <2>; + clocks = <&gateclk 11>; + status = "disabled"; + }; + + pcie@8,0 { + device_type = "pci"; + assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>; + reg = <0x4000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0 + 0x81000000 0 0 0x81000000 0x8 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 65>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <3>; + clocks = <&gateclk 12>; + status = "disabled"; + }; + + pcie@9,0 { + device_type = "pci"; + assigned-addresses = <0x82004800 0 0x42000 0 0x2000>; + reg = <0x4800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 + 0x81000000 0 0 0x81000000 0x9 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 99>; + marvell,pcie-port = <2>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 26>; + status = "disabled"; + }; + + pcie@10,0 { + device_type = "pci"; + assigned-addresses = <0x82005000 0 0x82000 0 0x2000>; + reg = <0x5000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0 + 0x81000000 0 0 0x81000000 0xa 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 103>; + marvell,pcie-port = <3>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 27>; + status = "disabled"; + }; + }; + internal-regs { pinctrl { compatible = "marvell,mv78460-pinctrl"; @@ -113,194 +334,6 @@ clocks = <&gateclk 1>; status = "disabled"; }; - - /* - * MV78460 has 4 PCIe units Gen2.0: Two units can be - * configured as x4 or quad x1 lanes. Two units are - * x4/x1. - */ - pcie-controller { - compatible = "marvell,armada-xp-pcie"; - status = "disabled"; - device_type = "pci"; - - #address-cells = <3>; - #size-cells = <2>; - - bus-range = <0x00 0xff>; - - ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */ - 0x82000000 0 0x42000 0x42000 0 0x00002000 /* Port 2.0 registers */ - 0x82000000 0 0x44000 0x44000 0 0x00002000 /* Port 0.1 registers */ - 0x82000000 0 0x48000 0x48000 0 0x00002000 /* Port 0.2 registers */ - 0x82000000 0 0x4c000 0x4c000 0 0x00002000 /* Port 0.3 registers */ - 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */ - 0x82000000 0 0x82000 0x82000 0 0x00002000 /* Port 3.0 registers */ - 0x82000000 0 0x84000 0x84000 0 0x00002000 /* Port 1.1 registers */ - 0x82000000 0 0x88000 0x88000 0 0x00002000 /* Port 1.2 registers */ - 0x82000000 0 0x8c000 0x8c000 0 0x00002000 /* Port 1.3 registers */ - 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ - 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ - - pcie@1,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 58>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 5>; - status = "disabled"; - }; - - pcie@2,0 { - device_type = "pci"; - assigned-addresses = <0x82001000 0 0x44000 0 0x2000>; - reg = <0x1000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 59>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <1>; - clocks = <&gateclk 6>; - status = "disabled"; - }; - - pcie@3,0 { - device_type = "pci"; - assigned-addresses = <0x82001800 0 0x48000 0 0x2000>; - reg = <0x1800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 60>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <2>; - clocks = <&gateclk 7>; - status = "disabled"; - }; - - pcie@4,0 { - device_type = "pci"; - assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>; - reg = <0x2000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 61>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <3>; - clocks = <&gateclk 8>; - status = "disabled"; - }; - - pcie@5,0 { - device_type = "pci"; - assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; - reg = <0x2800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 62>; - marvell,pcie-port = <1>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 9>; - status = "disabled"; - }; - - pcie@6,0 { - device_type = "pci"; - assigned-addresses = <0x82003000 0 0x84000 0 0x2000>; - reg = <0x3000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 63>; - marvell,pcie-port = <1>; - marvell,pcie-lane = <1>; - clocks = <&gateclk 10>; - status = "disabled"; - }; - - pcie@7,0 { - device_type = "pci"; - assigned-addresses = <0x82003800 0 0x88000 0 0x2000>; - reg = <0x3800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 64>; - marvell,pcie-port = <1>; - marvell,pcie-lane = <2>; - clocks = <&gateclk 11>; - status = "disabled"; - }; - - pcie@8,0 { - device_type = "pci"; - assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>; - reg = <0x4000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 65>; - marvell,pcie-port = <1>; - marvell,pcie-lane = <3>; - clocks = <&gateclk 12>; - status = "disabled"; - }; - pcie@9,0 { - device_type = "pci"; - assigned-addresses = <0x82004800 0 0x42000 0 0x2000>; - reg = <0x4800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 99>; - marvell,pcie-port = <2>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 26>; - status = "disabled"; - }; - - pcie@10,0 { - device_type = "pci"; - assigned-addresses = <0x82005000 0 0x82000 0 0x2000>; - reg = <0x5000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 103>; - marvell,pcie-port = <3>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 27>; - status = "disabled"; - }; - }; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index 8f51045..5695afc 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -11,7 +11,7 @@ */ /dts-v1/; -/include/ "armada-xp-mv78260.dtsi" +#include "armada-xp-mv78260.dtsi" / { model = "PlatHome OpenBlocks AX3-4 board"; @@ -27,9 +27,46 @@ }; soc { - ranges = <0 0 0xd0000000 0x100000 /* Internal registers 1MiB */ - 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */ - 0xf0000000 0 0xf0000000 0x8000000 /* Device Bus, NOR 128MiB */>; + ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 + MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000>; + + devbus-bootcs { + status = "okay"; + + /* Device Bus parameters are required */ + + /* Read parameters */ + devbus,bus-width = <8>; + devbus,turn-off-ps = <60000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <124000>; + devbus,acc-next-ps = <248000>; + devbus,rd-setup-ps = <0>; + devbus,rd-hold-ps = <0>; + + /* Write parameters */ + devbus,sync-enable = <0>; + devbus,wr-high-ps = <60000>; + devbus,wr-low-ps = <60000>; + devbus,ale-wr-ps = <60000>; + + /* NOR 128 MiB */ + nor@0 { + compatible = "cfi-flash"; + reg = <0 0x8000000>; + bank-width = <2>; + }; + }; + + pcie-controller { + status = "okay"; + /* Internal mini-PCIe connector */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + }; internal-regs { serial@12000 { @@ -148,49 +185,6 @@ usb@51000 { status = "okay"; }; - - /* USB interface in the mini-PCIe connector */ - usb@52000 { - status = "okay"; - }; - - devbus-bootcs@10400 { - status = "okay"; - ranges = <0 0xf0000000 0x8000000>; /* @addr 0xf000000, size 0x8000000 */ - - /* Device Bus parameters are required */ - - /* Read parameters */ - devbus,bus-width = <8>; - devbus,turn-off-ps = <60000>; - devbus,badr-skew-ps = <0>; - devbus,acc-first-ps = <124000>; - devbus,acc-next-ps = <248000>; - devbus,rd-setup-ps = <0>; - devbus,rd-hold-ps = <0>; - - /* Write parameters */ - devbus,sync-enable = <0>; - devbus,wr-high-ps = <60000>; - devbus,wr-low-ps = <60000>; - devbus,ale-wr-ps = <60000>; - - /* NOR 128 MiB */ - nor@0 { - compatible = "cfi-flash"; - reg = <0 0x8000000>; - bank-width = <2>; - }; - }; - - pcie-controller { - status = "okay"; - /* Internal mini-PCIe connector */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - }; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index 416eb94..7ba99ce 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -16,7 +16,7 @@ * common to all Armada SoCs. */ -/include/ "armada-370-xp.dtsi" +#include "armada-370-xp.dtsi" / { model = "Marvell Armada XP family SoC"; @@ -27,6 +27,13 @@ }; soc { + compatible = "marvell,armadaxp-mbus", "simple-bus"; + + bootrom { + compatible = "marvell,bootrom"; + reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>; + }; + internal-regs { L2: l2-cache { compatible = "marvell,aurora-system-cache"; diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi index 1e5bef0..650ef30 100644 --- a/arch/arm/boot/dts/kirkwood-6281.dtsi +++ b/arch/arm/boot/dts/kirkwood-6281.dtsi @@ -1,4 +1,39 @@ / { + mbus { + pcie-controller { + compatible = "marvell,kirkwood-pcie"; + status = "disabled"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + bus-range = <0x00 0xff>; + + ranges = + <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 + 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ + 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>; + + pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 + 0x81000000 0 0 0x81000000 0x1 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &intc 9>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gate_clk 2>; + status = "disabled"; + }; + }; + }; + ocp@f1000000 { pinctrl: pinctrl@10000 { compatible = "marvell,88f6281-pinctrl"; @@ -41,37 +76,6 @@ }; }; - pcie-controller { - compatible = "marvell,kirkwood-pcie"; - status = "disabled"; - device_type = "pci"; - - #address-cells = <3>; - #size-cells = <2>; - - bus-range = <0x00 0xff>; - - ranges = <0x82000000 0 0x00040000 0x00040000 0 0x00002000 /* Port 0.0 registers */ - 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ - 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ - - pcie@1,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &intc 9>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <0>; - clocks = <&gate_clk 2>; - status = "disabled"; - }; - }; - rtc@10300 { compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc"; reg = <0x10300 0x20>; diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi index a63a111..3933a33 100644 --- a/arch/arm/boot/dts/kirkwood-6282.dtsi +++ b/arch/arm/boot/dts/kirkwood-6282.dtsi @@ -1,4 +1,59 @@ / { + mbus { + pcie-controller { + compatible = "marvell,kirkwood-pcie"; + status = "disabled"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + bus-range = <0x00 0xff>; + + ranges = + <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 + 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 + 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 + 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ + 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ + 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1.0 MEM */ + 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1.0 IO */>; + + pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 + 0x81000000 0 0 0x81000000 0x1 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &intc 9>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gate_clk 2>; + status = "disabled"; + }; + + pcie@2,0 { + device_type = "pci"; + assigned-addresses = <0x82001000 0 0x00044000 0 0x2000>; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 + 0x81000000 0 0 0x81000000 0x2 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &intc 10>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <0>; + clocks = <&gate_clk 18>; + status = "disabled"; + }; + }; + }; ocp@f1000000 { pinctrl: pinctrl@10000 { @@ -94,52 +149,5 @@ status = "disabled"; }; - pcie-controller { - compatible = "marvell,kirkwood-pcie"; - status = "disabled"; - device_type = "pci"; - - #address-cells = <3>; - #size-cells = <2>; - - bus-range = <0x00 0xff>; - - ranges = <0x82000000 0 0x00040000 0x00040000 0 0x00002000 /* Port 0.0 registers */ - 0x82000000 0 0x00044000 0x00044000 0 0x00002000 /* Port 1.0 registers */ - 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ - 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ - - pcie@1,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &intc 9>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <0>; - clocks = <&gate_clk 2>; - status = "disabled"; - }; - - pcie@2,0 { - device_type = "pci"; - assigned-addresses = <0x82001000 0 0x00044000 0 0x2000>; - reg = <0x1000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &intc 10>; - marvell,pcie-port = <1>; - marvell,pcie-lane = <0>; - clocks = <&gate_clk 18>; - status = "disabled"; - }; - }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-cloudbox.dts b/arch/arm/boot/dts/kirkwood-cloudbox.dts index 00c48d2..9bf139c 100644 --- a/arch/arm/boot/dts/kirkwood-cloudbox.dts +++ b/arch/arm/boot/dts/kirkwood-cloudbox.dts @@ -1,7 +1,7 @@ /dts-v1/; -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6281.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" / { model = "LaCie CloudBox"; diff --git a/arch/arm/boot/dts/kirkwood-db-88f6281.dts b/arch/arm/boot/dts/kirkwood-db-88f6281.dts index 9d777ed..72c4b0a 100644 --- a/arch/arm/boot/dts/kirkwood-db-88f6281.dts +++ b/arch/arm/boot/dts/kirkwood-db-88f6281.dts @@ -11,14 +11,15 @@ /dts-v1/; -/include/ "kirkwood-db.dtsi" -/include/ "kirkwood-6281.dtsi" +#include "kirkwood-db.dtsi" +#include "kirkwood-6281.dtsi" / { model = "Marvell DB-88F6281-BP Development Board"; compatible = "marvell,db-88f6281-bp", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - ocp@f1000000 { + mbus { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>; pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-db-88f6282.dts b/arch/arm/boot/dts/kirkwood-db-88f6282.dts index f4c8528..36c411d 100644 --- a/arch/arm/boot/dts/kirkwood-db-88f6282.dts +++ b/arch/arm/boot/dts/kirkwood-db-88f6282.dts @@ -11,14 +11,15 @@ /dts-v1/; -/include/ "kirkwood-db.dtsi" -/include/ "kirkwood-6282.dtsi" +#include "kirkwood-db.dtsi" +#include "kirkwood-6282.dtsi" / { model = "Marvell DB-88F6282-BP Development Board"; compatible = "marvell,db-88f6282-bp", "marvell,kirkwood-88f6282", "marvell,kirkwood"; - ocp@f1000000 { + mbus { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>; pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-db.dtsi b/arch/arm/boot/dts/kirkwood-db.dtsi index c87cfb8..45c1bf7 100644 --- a/arch/arm/boot/dts/kirkwood-db.dtsi +++ b/arch/arm/boot/dts/kirkwood-db.dtsi @@ -12,7 +12,7 @@ * and 6282 variants of the Marvell Kirkwood Development Board. */ -/include/ "kirkwood.dtsi" +#include "kirkwood.dtsi" / { memory { @@ -77,13 +77,5 @@ cd-gpios = <&gpio1 6 0>; status = "okay"; }; - - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-dns320.dts b/arch/arm/boot/dts/kirkwood-dns320.dts index 14d4cee..e112ca6 100644 --- a/arch/arm/boot/dts/kirkwood-dns320.dts +++ b/arch/arm/boot/dts/kirkwood-dns320.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "kirkwood-dnskw.dtsi" +#include "kirkwood-dnskw.dtsi" / { model = "D-Link DNS-320 NAS (Rev A1)"; diff --git a/arch/arm/boot/dts/kirkwood-dns325.dts b/arch/arm/boot/dts/kirkwood-dns325.dts index 6387257..5119fb8 100644 --- a/arch/arm/boot/dts/kirkwood-dns325.dts +++ b/arch/arm/boot/dts/kirkwood-dns325.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "kirkwood-dnskw.dtsi" +#include "kirkwood-dnskw.dtsi" / { model = "D-Link DNS-325 NAS (Rev A1)"; diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi index 0afe1d0..2e04284 100644 --- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi +++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi @@ -1,5 +1,5 @@ -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6281.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" / { model = "D-Link DNS NASes (kirkwood-based)"; diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts index 7714742..4387ae8 100644 --- a/arch/arm/boot/dts/kirkwood-dockstar.dts +++ b/arch/arm/boot/dts/kirkwood-dockstar.dts @@ -1,7 +1,7 @@ /dts-v1/; -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6281.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" / { model = "Seagate FreeAgent Dockstar"; diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts index 36c7ba3..c628378 100644 --- a/arch/arm/boot/dts/kirkwood-dreamplug.dts +++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts @@ -1,7 +1,7 @@ /dts-v1/; -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6281.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" / { model = "Globalscale Technologies Dreamplug"; diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts index 31caa64..e571180 100644 --- a/arch/arm/boot/dts/kirkwood-goflexnet.dts +++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts @@ -1,7 +1,7 @@ /dts-v1/; -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6281.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" / { model = "Seagate GoFlex Net"; diff --git a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts index 1e642f3..2c5673a 100644 --- a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts +++ b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts @@ -1,7 +1,7 @@ /dts-v1/; -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6281.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" / { model = "Globalscale Technologies Guruplug Server Plus"; diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts index 20c4b08..158161f 100644 --- a/arch/arm/boot/dts/kirkwood-ib62x0.dts +++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts @@ -1,7 +1,7 @@ /dts-v1/; -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6281.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" / { model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)"; diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts index 441204e..8314118 100644 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -1,7 +1,7 @@ /dts-v1/; -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6281.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" / { model = "Iomega Iconnect"; @@ -18,6 +18,17 @@ linux,initrd-end = <0x4800000>; }; + mbus { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>; + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; + }; + ocp@f1000000 { pinctrl: pinctrl@10000 { pmx_button_reset: pmx-button-reset { @@ -101,14 +112,6 @@ reg = <0x980000 0x1f400000>; }; }; - - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; }; gpio-leds { diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts index 00a7bfe..fd7f053 100644 --- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts +++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts @@ -1,7 +1,7 @@ /dts-v1/; -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6281.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" / { model = "Iomega StorCenter ix2-200"; diff --git a/arch/arm/boot/dts/kirkwood-is2.dts b/arch/arm/boot/dts/kirkwood-is2.dts index c3f036b..bd88a23 100644 --- a/arch/arm/boot/dts/kirkwood-is2.dts +++ b/arch/arm/boot/dts/kirkwood-is2.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "kirkwood-ns2-common.dtsi" +#include "kirkwood-ns2-common.dtsi" / { model = "LaCie Internet Space v2"; diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts index 5d9f5ea..b071d37 100644 --- a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts +++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts @@ -1,7 +1,7 @@ /dts-v1/; -/include/ "kirkwood.dtsi" -/include/ "kirkwood-98dx4122.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-98dx4122.dtsi" / { model = "Keymile Kirkwood Reference Design"; diff --git a/arch/arm/boot/dts/kirkwood-lschlv2.dts b/arch/arm/boot/dts/kirkwood-lschlv2.dts index 9f55d95..e2fa368 100644 --- a/arch/arm/boot/dts/kirkwood-lschlv2.dts +++ b/arch/arm/boot/dts/kirkwood-lschlv2.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "kirkwood-lsxl.dtsi" +#include "kirkwood-lsxl.dtsi" / { model = "Buffalo Linkstation LS-CHLv2"; diff --git a/arch/arm/boot/dts/kirkwood-lsxhl.dts b/arch/arm/boot/dts/kirkwood-lsxhl.dts index 5c84c11..8d89cdf 100644 --- a/arch/arm/boot/dts/kirkwood-lsxhl.dts +++ b/arch/arm/boot/dts/kirkwood-lsxhl.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "kirkwood-lsxl.dtsi" +#include "kirkwood-lsxl.dtsi" / { model = "Buffalo Linkstation LS-XHL"; diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi index 31b17f5..f7e247c 100644 --- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi +++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi @@ -1,5 +1,5 @@ -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6281.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" / { chosen { diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts index 6179333..21f1954 100644 --- a/arch/arm/boot/dts/kirkwood-mplcec4.dts +++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts @@ -1,7 +1,7 @@ /dts-v1/; -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6281.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" / { model = "MPL CEC4"; @@ -16,6 +16,17 @@ bootargs = "console=ttyS0,115200n8 earlyprintk"; }; + mbus { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>; + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; + }; + ocp@f1000000 { pinctrl: pinctrl@10000 { pmx_led_health: pmx-led-health { @@ -134,14 +145,6 @@ cd-gpios = <&gpio1 15 1>; /* No WP GPIO */ }; - - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; }; gpio-leds { diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts index ad6ade7..84ff31c 100644 --- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts +++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts @@ -1,7 +1,7 @@ /dts-v1/; -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6282.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6282.dtsi" / { model = "NETGEAR ReadyNAS Duo v2"; @@ -16,6 +16,17 @@ bootargs = "console=ttyS0,115200n8 earlyprintk"; }; + mbus { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>; + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; + }; + ocp@f1000000 { pinctrl: pinctrl@10000 { pmx_button_power: pmx-button-power { @@ -101,14 +112,6 @@ status = "okay"; nr-ports = <2>; }; - - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; }; gpio-leds { diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi index 2afac04..d0fb34d 100644 --- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi @@ -1,5 +1,5 @@ -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6281.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" / { chosen { diff --git a/arch/arm/boot/dts/kirkwood-ns2.dts b/arch/arm/boot/dts/kirkwood-ns2.dts index b50e93d..0599f3c 100644 --- a/arch/arm/boot/dts/kirkwood-ns2.dts +++ b/arch/arm/boot/dts/kirkwood-ns2.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "kirkwood-ns2-common.dtsi" +#include "kirkwood-ns2-common.dtsi" / { model = "LaCie Network Space v2"; diff --git a/arch/arm/boot/dts/kirkwood-ns2lite.dts b/arch/arm/boot/dts/kirkwood-ns2lite.dts index af8259f..b0e1798 100644 --- a/arch/arm/boot/dts/kirkwood-ns2lite.dts +++ b/arch/arm/boot/dts/kirkwood-ns2lite.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "kirkwood-ns2-common.dtsi" +#include "kirkwood-ns2-common.dtsi" / { model = "LaCie Network Space Lite v2"; diff --git a/arch/arm/boot/dts/kirkwood-ns2max.dts b/arch/arm/boot/dts/kirkwood-ns2max.dts index 85f24d2..d4f6a58 100644 --- a/arch/arm/boot/dts/kirkwood-ns2max.dts +++ b/arch/arm/boot/dts/kirkwood-ns2max.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "kirkwood-ns2-common.dtsi" +#include "kirkwood-ns2-common.dtsi" / { model = "LaCie Network Space Max v2"; diff --git a/arch/arm/boot/dts/kirkwood-ns2mini.dts b/arch/arm/boot/dts/kirkwood-ns2mini.dts index 329e530..f30e05a 100644 --- a/arch/arm/boot/dts/kirkwood-ns2mini.dts +++ b/arch/arm/boot/dts/kirkwood-ns2mini.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "kirkwood-ns2-common.dtsi" +#include "kirkwood-ns2-common.dtsi" / { /* This machine is embedded in the first LaCie CloudBox product. */ diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts index 6900359..bd7f05f 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310.dts +++ b/arch/arm/boot/dts/kirkwood-nsa310.dts @@ -1,7 +1,7 @@ /dts-v1/; -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6281.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" / { model = "ZyXEL NSA310"; @@ -16,6 +16,17 @@ bootargs = "console=ttyS0,115200"; }; + mbus { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>; + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; + }; + ocp@f1000000 { pinctrl: pinctrl@10000 { pinctrl-0 = <&pmx_unknown>; @@ -162,14 +173,6 @@ reg = <0x5040000 0x2fc0000>; }; }; - - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; }; gpio_keys { diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts index 38dc851..365b792 100644 --- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts +++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts @@ -1,7 +1,7 @@ /dts-v1/; -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6282.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6282.dtsi" / { model = "Plat'Home OpenBlocksA6"; diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi index f7143f1..0cc5f26 100644 --- a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi @@ -6,8 +6,8 @@ * Licensed under GPLv2 */ -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6281.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" / { memory { diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts b/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts index f620ce4..eac6a21 100644 --- a/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts +++ b/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts @@ -8,7 +8,7 @@ /dts-v1/; -/include/ "kirkwood-sheevaplug-common.dtsi" +#include "kirkwood-sheevaplug-common.dtsi" / { model = "Globalscale Technologies eSATA SheevaPlug"; diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug.dts b/arch/arm/boot/dts/kirkwood-sheevaplug.dts index bf1dff2..bb61918 100644 --- a/arch/arm/boot/dts/kirkwood-sheevaplug.dts +++ b/arch/arm/boot/dts/kirkwood-sheevaplug.dts @@ -8,7 +8,7 @@ /dts-v1/; -/include/ "kirkwood-sheevaplug-common.dtsi" +#include "kirkwood-sheevaplug-common.dtsi" / { model = "Globalscale Technologies SheevaPlug"; diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts index f2052d7..974f1e0 100644 --- a/arch/arm/boot/dts/kirkwood-topkick.dts +++ b/arch/arm/boot/dts/kirkwood-topkick.dts @@ -1,7 +1,7 @@ /dts-v1/; -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6282.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6282.dtsi" / { model = "Univeral Scientific Industrial Co. Topkick-1281P2"; diff --git a/arch/arm/boot/dts/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/kirkwood-ts219-6281.dts index 6dd1038..3867ae3 100644 --- a/arch/arm/boot/dts/kirkwood-ts219-6281.dts +++ b/arch/arm/boot/dts/kirkwood-ts219-6281.dts @@ -1,8 +1,8 @@ /dts-v1/; -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6281.dtsi" -/include/ "kirkwood-ts219.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" +#include "kirkwood-ts219.dtsi" / { ocp@f1000000 { diff --git a/arch/arm/boot/dts/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/kirkwood-ts219-6282.dts index 6fdc5ff..04f6fe1 100644 --- a/arch/arm/boot/dts/kirkwood-ts219-6282.dts +++ b/arch/arm/boot/dts/kirkwood-ts219-6282.dts @@ -1,10 +1,21 @@ /dts-v1/; -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6282.dtsi" -/include/ "kirkwood-ts219.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6282.dtsi" +#include "kirkwood-ts219.dtsi" / { + mbus { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>; + pcie-controller { + status = "okay"; + + pcie@2,0 { + status = "okay"; + }; + }; + }; + ocp@f1000000 { pinctrl: pinctrl@10000 { @@ -30,14 +41,6 @@ marvell,function = "gpio"; }; }; - pcie-controller { - status = "okay"; - - pcie@2,0 { - status = "okay"; - }; - }; - }; gpio_keys { diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi index 0c9a94c..7019cf6 100644 --- a/arch/arm/boot/dts/kirkwood-ts219.dtsi +++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi @@ -11,6 +11,16 @@ bootargs = "console=ttyS0,115200n8"; }; + mbus { + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; + }; + ocp@f1000000 { i2c@11000 { status = "okay"; @@ -87,12 +97,5 @@ status = "okay"; nr-ports = <2>; }; - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; }; }; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 9809fc1..70f414d 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -1,5 +1,7 @@ /include/ "skeleton.dtsi" +#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) + / { compatible = "marvell,kirkwood"; interrupt-parent = <&intc>; @@ -28,15 +30,28 @@ <0xf1020214 0x04>; }; + mbus { + compatible = "marvell,kirkwood-mbus", "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + controller = <&mbusc>; + pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */ + pcie-io-aperture = <0xf2000000 0x100000>; /* 1 MiB I/O space */ + }; + ocp@f1000000 { compatible = "simple-bus"; ranges = <0x00000000 0xf1000000 0x0100000 - 0xe0000000 0xe0000000 0x8100000 /* PCIE */ 0xf4000000 0xf4000000 0x0000400 0xf5000000 0xf5000000 0x0000400>; #address-cells = <1>; #size-cells = <1>; + mbusc: mbus-controller@20000 { + compatible = "marvell,mbus-controller"; + reg = <0x20000 0x80>, <0x1500 0x20>; + }; + core_clk: core-clocks@10030 { compatible = "marvell,kirkwood-core-clock"; reg = <0x10030 0x4>; |