diff options
Diffstat (limited to 'arch/arm/mach-imx/ehci-imx5.c')
| -rw-r--r-- | arch/arm/mach-imx/ehci-imx5.c | 17 |
1 files changed, 16 insertions, 1 deletions
diff --git a/arch/arm/mach-imx/ehci-imx5.c b/arch/arm/mach-imx/ehci-imx5.c index c17fa13..49e3b34 100644 --- a/arch/arm/mach-imx/ehci-imx5.c +++ b/arch/arm/mach-imx/ehci-imx5.c @@ -28,11 +28,14 @@ #define MXC_OTG_UCTRL_OPM_BIT (1 << 24) /* OTG power mask */ #define MXC_H1_UCTRL_H1UIE_BIT (1 << 12) /* Host1 ULPI interrupt enable */ #define MXC_H1_UCTRL_H1WIE_BIT (1 << 11) /* HOST1 wakeup intr enable */ -#define MXC_H1_UCTRL_H1PM_BIT (1 << 8) /* HOST1 power mask */ +#define MXC_H1_UCTRL_H1PM_BIT (1 << 8) /* HOST1 power mask */ /* USB_PHY_CTRL_FUNC */ +#define MXC_OTG_PHYCTRL_OC_POL_BIT (1 << 9) /* OTG Polarity of Overcurrent */ #define MXC_OTG_PHYCTRL_OC_DIS_BIT (1 << 8) /* OTG Disable Overcurrent Event */ +#define MXC_H1_OC_POL_BIT (1 << 6) /* UH1 Polarity of Overcurrent */ #define MXC_H1_OC_DIS_BIT (1 << 5) /* UH1 Disable Overcurrent Event */ +#define MXC_OTG_PHYCTRL_PWR_POL_BIT (1 << 3) /* OTG Power Pin Polarity */ /* USBH2CTRL */ #define MXC_H2_UCTRL_H2UIE_BIT (1 << 8) @@ -80,6 +83,10 @@ int mx51_initialize_usb_hw(int port, unsigned int flags) if (flags & MXC_EHCI_INTERNAL_PHY) { v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET); + if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW) + v |= MXC_OTG_PHYCTRL_OC_POL_BIT; + else + v &= ~MXC_OTG_PHYCTRL_OC_POL_BIT; if (flags & MXC_EHCI_POWER_PINS_ENABLED) { /* OC/USBPWR is not used */ v |= MXC_OTG_PHYCTRL_OC_DIS_BIT; @@ -87,6 +94,10 @@ int mx51_initialize_usb_hw(int port, unsigned int flags) /* OC/USBPWR is used */ v &= ~MXC_OTG_PHYCTRL_OC_DIS_BIT; } + if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH) + v |= MXC_OTG_PHYCTRL_PWR_POL_BIT; + else + v &= ~MXC_OTG_PHYCTRL_PWR_POL_BIT; __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET); v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET); @@ -119,6 +130,10 @@ int mx51_initialize_usb_hw(int port, unsigned int flags) __raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET); v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET); + if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW) + v |= MXC_H1_OC_POL_BIT; + else + v &= ~MXC_H1_OC_POL_BIT; if (flags & MXC_EHCI_POWER_PINS_ENABLED) v &= ~MXC_H1_OC_DIS_BIT; /* OC is used */ else |