summaryrefslogtreecommitdiff
path: root/arch/arm/mach-l7200/include/mach/serial_l7200.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-l7200/include/mach/serial_l7200.h')
-rw-r--r--arch/arm/mach-l7200/include/mach/serial_l7200.h101
1 files changed, 0 insertions, 101 deletions
diff --git a/arch/arm/mach-l7200/include/mach/serial_l7200.h b/arch/arm/mach-l7200/include/mach/serial_l7200.h
deleted file mode 100644
index 645f1c5..0000000
--- a/arch/arm/mach-l7200/include/mach/serial_l7200.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/serial_l7200.h
- *
- * Copyright (c) 2000 Steven Hill (sjhill@cotw.com)
- *
- * Changelog:
- * 05-09-2000 SJH Created
- */
-#ifndef __ASM_ARCH_SERIAL_L7200_H
-#define __ASM_ARCH_SERIAL_L7200_H
-
-#include <mach/memory.h>
-
-/*
- * This assumes you have a 3.6864 MHz clock for your UART.
- */
-#define BASE_BAUD 3686400
-
-/*
- * UART base register addresses
- */
-#define UART1_BASE (IO_BASE + 0x00044000)
-#define UART2_BASE (IO_BASE + 0x00045000)
-
-/*
- * UART register offsets
- */
-#define UARTDR 0x00 /* Tx/Rx data */
-#define RXSTAT 0x04 /* Rx status */
-#define H_UBRLCR 0x08 /* mode register high */
-#define M_UBRLCR 0x0C /* mode reg mid (MSB of baud)*/
-#define L_UBRLCR 0x10 /* mode reg low (LSB of baud)*/
-#define UARTCON 0x14 /* control register */
-#define UARTFLG 0x18 /* flag register */
-#define UARTINTSTAT 0x1C /* FIFO IRQ status register */
-#define UARTINTMASK 0x20 /* FIFO IRQ mask register */
-
-/*
- * UART baud rate register values
- */
-#define BR_110 0x827
-#define BR_1200 0x06e
-#define BR_2400 0x05f
-#define BR_4800 0x02f
-#define BR_9600 0x017
-#define BR_14400 0x00f
-#define BR_19200 0x00b
-#define BR_38400 0x005
-#define BR_57600 0x003
-#define BR_76800 0x002
-#define BR_115200 0x001
-
-/*
- * Receiver status register (RXSTAT) mask values
- */
-#define RXSTAT_NO_ERR 0x00 /* No error */
-#define RXSTAT_FRM_ERR 0x01 /* Framing error */
-#define RXSTAT_PAR_ERR 0x02 /* Parity error */
-#define RXSTAT_OVR_ERR 0x04 /* Overrun error */
-
-/*
- * High byte of UART bit rate and line control register (H_UBRLCR) values
- */
-#define UBRLCR_BRK 0x01 /* generate break on tx */
-#define UBRLCR_PEN 0x02 /* enable parity */
-#define UBRLCR_PDIS 0x00 /* disable parity */
-#define UBRLCR_EVEN 0x04 /* 1= even parity,0 = odd parity */
-#define UBRLCR_STP2 0x08 /* transmit 2 stop bits */
-#define UBRLCR_FIFO 0x10 /* enable FIFO */
-#define UBRLCR_LEN5 0x60 /* word length5 */
-#define UBRLCR_LEN6 0x40 /* word length6 */
-#define UBRLCR_LEN7 0x20 /* word length7 */
-#define UBRLCR_LEN8 0x00 /* word length8 */
-
-/*
- * UART control register (UARTCON) values
- */
-#define UARTCON_UARTEN 0x01 /* Enable UART */
-#define UARTCON_DMAONERR 0x08 /* Mask RxDmaRq when errors occur */
-
-/*
- * UART flag register (UARTFLG) mask values
- */
-#define UARTFLG_UTXFF 0x20 /* Transmit FIFO full */
-#define UARTFLG_URXFE 0x10 /* Receiver FIFO empty */
-#define UARTFLG_UBUSY 0x08 /* Transmitter busy */
-#define UARTFLG_DCD 0x04 /* Data carrier detect */
-#define UARTFLG_DSR 0x02 /* Data set ready */
-#define UARTFLG_CTS 0x01 /* Clear to send */
-
-/*
- * UART interrupt status/clear registers (UARTINTSTAT/CLR) values
- */
-#define UART_TXINT 0x01 /* TX interrupt */
-#define UART_RXINT 0x02 /* RX interrupt */
-#define UART_RXERRINT 0x04 /* RX error interrupt */
-#define UART_MSINT 0x08 /* Modem Status interrupt */
-#define UART_UDINT 0x10 /* UART Disabled interrupt */
-#define UART_ALLIRQS 0x1f /* All interrupts */
-
-#endif