diff options
Diffstat (limited to 'arch/arm/mach-omap2/omap_hwmod.c')
-rw-r--r-- | arch/arm/mach-omap2/omap_hwmod.c | 138 |
1 files changed, 106 insertions, 32 deletions
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 00c0066..299ca28 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -679,16 +679,25 @@ static int _init_main_clk(struct omap_hwmod *oh) if (!oh->main_clk) return 0; - oh->_clk = omap_clk_get_by_name(oh->main_clk); - if (!oh->_clk) { + oh->_clk = clk_get(NULL, oh->main_clk); + if (IS_ERR(oh->_clk)) { pr_warning("omap_hwmod: %s: cannot clk_get main_clk %s\n", oh->name, oh->main_clk); return -EINVAL; } + /* + * HACK: This needs a re-visit once clk_prepare() is implemented + * to do something meaningful. Today its just a no-op. + * If clk_prepare() is used at some point to do things like + * voltage scaling etc, then this would have to be moved to + * some point where subsystems like i2c and pmic become + * available. + */ + clk_prepare(oh->_clk); if (!oh->_clk->clkdm) - pr_warning("omap_hwmod: %s: missing clockdomain for %s.\n", - oh->main_clk, oh->_clk->name); + pr_debug("omap_hwmod: %s: missing clockdomain for %s.\n", + oh->name, oh->main_clk); return ret; } @@ -715,13 +724,22 @@ static int _init_interface_clks(struct omap_hwmod *oh) if (!os->clk) continue; - c = omap_clk_get_by_name(os->clk); - if (!c) { + c = clk_get(NULL, os->clk); + if (IS_ERR(c)) { pr_warning("omap_hwmod: %s: cannot clk_get interface_clk %s\n", oh->name, os->clk); ret = -EINVAL; } os->_clk = c; + /* + * HACK: This needs a re-visit once clk_prepare() is implemented + * to do something meaningful. Today its just a no-op. + * If clk_prepare() is used at some point to do things like + * voltage scaling etc, then this would have to be moved to + * some point where subsystems like i2c and pmic become + * available. + */ + clk_prepare(os->_clk); } return ret; @@ -742,13 +760,22 @@ static int _init_opt_clks(struct omap_hwmod *oh) int ret = 0; for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) { - c = omap_clk_get_by_name(oc->clk); - if (!c) { + c = clk_get(NULL, oc->clk); + if (IS_ERR(c)) { pr_warning("omap_hwmod: %s: cannot clk_get opt_clk %s\n", oh->name, oc->clk); ret = -EINVAL; } oc->_clk = c; + /* + * HACK: This needs a re-visit once clk_prepare() is implemented + * to do something meaningful. Today its just a no-op. + * If clk_prepare() is used at some point to do things like + * voltage scaling etc, then this would have to be moved to + * some point where subsystems like i2c and pmic become + * available. + */ + clk_prepare(oc->_clk); } return ret; @@ -827,7 +854,7 @@ static void _enable_optional_clocks(struct omap_hwmod *oh) for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) if (oc->_clk) { pr_debug("omap_hwmod: enable %s:%s\n", oc->role, - oc->_clk->name); + __clk_get_name(oc->_clk)); clk_enable(oc->_clk); } } @@ -842,7 +869,7 @@ static void _disable_optional_clocks(struct omap_hwmod *oh) for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) if (oc->_clk) { pr_debug("omap_hwmod: disable %s:%s\n", oc->role, - oc->_clk->name); + __clk_get_name(oc->_clk)); clk_disable(oc->_clk); } } @@ -900,10 +927,10 @@ static void _am33xx_enable_module(struct omap_hwmod *oh) */ static int _omap4_wait_target_disable(struct omap_hwmod *oh) { - if (!oh || !oh->clkdm) + if (!oh) return -EINVAL; - if (oh->_int_flags & _HWMOD_NO_MPU_PORT) + if (oh->_int_flags & _HWMOD_NO_MPU_PORT || !oh->clkdm) return 0; if (oh->flags & HWMOD_NO_IDLEST) @@ -1427,8 +1454,10 @@ static struct omap_hwmod *_lookup(const char *name) */ static int _init_clkdm(struct omap_hwmod *oh) { - if (!oh->clkdm_name) + if (!oh->clkdm_name) { + pr_debug("omap_hwmod: %s: missing clockdomain\n", oh->name); return 0; + } oh->clkdm = clkdm_lookup(oh->clkdm_name); if (!oh->clkdm) { @@ -1556,6 +1585,7 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name) { struct omap_hwmod_rst_info ohri; int ret = -EINVAL; + int hwsup = 0; if (!oh) return -EINVAL; @@ -1567,10 +1597,46 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name) if (IS_ERR_VALUE(ret)) return ret; + if (oh->clkdm) { + /* + * A clockdomain must be in SW_SUP otherwise reset + * might not be completed. The clockdomain can be set + * in HW_AUTO only when the module become ready. + */ + hwsup = clkdm_in_hwsup(oh->clkdm); + ret = clkdm_hwmod_enable(oh->clkdm, oh); + if (ret) { + WARN(1, "omap_hwmod: %s: could not enable clockdomain %s: %d\n", + oh->name, oh->clkdm->name, ret); + return ret; + } + } + + _enable_clocks(oh); + if (soc_ops.enable_module) + soc_ops.enable_module(oh); + ret = soc_ops.deassert_hardreset(oh, &ohri); + + if (soc_ops.disable_module) + soc_ops.disable_module(oh); + _disable_clocks(oh); + if (ret == -EBUSY) pr_warning("omap_hwmod: %s: failed to hardreset\n", oh->name); + if (!ret) { + /* + * Set the clockdomain to HW_AUTO, assuming that the + * previous state was HW_AUTO. + */ + if (oh->clkdm && hwsup) + clkdm_allow_idle(oh->clkdm); + } else { + if (oh->clkdm) + clkdm_hwmod_disable(oh->clkdm, oh); + } + return ret; } @@ -1605,25 +1671,28 @@ static int _read_hardreset(struct omap_hwmod *oh, const char *name) } /** - * _are_any_hardreset_lines_asserted - return true if part of @oh is hard-reset + * _are_all_hardreset_lines_asserted - return true if the @oh is hard-reset * @oh: struct omap_hwmod * * - * If any hardreset line associated with @oh is asserted, then return true. - * Otherwise, if @oh has no hardreset lines associated with it, or if - * no hardreset lines associated with @oh are asserted, then return false. + * If all hardreset lines associated with @oh are asserted, then return true. + * Otherwise, if part of @oh is out hardreset or if no hardreset lines + * associated with @oh are asserted, then return false. * This function is used to avoid executing some parts of the IP block - * enable/disable sequence if a hardreset line is set. + * enable/disable sequence if its hardreset line is set. */ -static bool _are_any_hardreset_lines_asserted(struct omap_hwmod *oh) +static bool _are_all_hardreset_lines_asserted(struct omap_hwmod *oh) { - int i; + int i, rst_cnt = 0; if (oh->rst_lines_cnt == 0) return false; for (i = 0; i < oh->rst_lines_cnt; i++) if (_read_hardreset(oh, oh->rst_lines[i].name) > 0) - return true; + rst_cnt++; + + if (oh->rst_lines_cnt == rst_cnt) + return true; return false; } @@ -1642,6 +1711,13 @@ static int _omap4_disable_module(struct omap_hwmod *oh) if (!oh->clkdm || !oh->prcm.omap4.modulemode) return -EINVAL; + /* + * Since integration code might still be doing something, only + * disable if all lines are under hardreset. + */ + if (!_are_all_hardreset_lines_asserted(oh)) + return 0; + pr_debug("omap_hwmod: %s: %s\n", oh->name, __func__); omap4_cminst_module_disable(oh->clkdm->prcm_partition, @@ -1649,9 +1725,6 @@ static int _omap4_disable_module(struct omap_hwmod *oh) oh->clkdm->clkdm_offs, oh->prcm.omap4.clkctrl_offs); - if (_are_any_hardreset_lines_asserted(oh)) - return 0; - v = _omap4_wait_target_disable(oh); if (v) pr_warn("omap_hwmod: %s: _wait_target_disable failed\n", @@ -1679,7 +1752,7 @@ static int _am33xx_disable_module(struct omap_hwmod *oh) am33xx_cm_module_disable(oh->clkdm->cm_inst, oh->clkdm->clkdm_offs, oh->prcm.omap4.clkctrl_offs); - if (_are_any_hardreset_lines_asserted(oh)) + if (_are_all_hardreset_lines_asserted(oh)) return 0; v = _am33xx_wait_target_disable(oh); @@ -1907,7 +1980,7 @@ static int _enable(struct omap_hwmod *oh) } /* - * If an IP block contains HW reset lines and any of them are + * If an IP block contains HW reset lines and all of them are * asserted, we let integration code associated with that * block handle the enable. We've received very little * information on what those driver authors need, and until @@ -1915,7 +1988,7 @@ static int _enable(struct omap_hwmod *oh) * posted to the public lists, this is probably the best we * can do. */ - if (_are_any_hardreset_lines_asserted(oh)) + if (_are_all_hardreset_lines_asserted(oh)) return 0; /* Mux pins for device runtime if populated */ @@ -1934,7 +2007,8 @@ static int _enable(struct omap_hwmod *oh) * completely the module. The clockdomain can be set * in HW_AUTO only when the module become ready. */ - hwsup = clkdm_in_hwsup(oh->clkdm); + hwsup = clkdm_in_hwsup(oh->clkdm) && + !clkdm_missing_idle_reporting(oh->clkdm); r = clkdm_hwmod_enable(oh->clkdm, oh); if (r) { WARN(1, "omap_hwmod: %s: could not enable clockdomain %s: %d\n", @@ -1996,7 +2070,7 @@ static int _idle(struct omap_hwmod *oh) return -EINVAL; } - if (_are_any_hardreset_lines_asserted(oh)) + if (_are_all_hardreset_lines_asserted(oh)) return 0; if (oh->class->sysc) @@ -2084,7 +2158,7 @@ static int _shutdown(struct omap_hwmod *oh) return -EINVAL; } - if (_are_any_hardreset_lines_asserted(oh)) + if (_are_all_hardreset_lines_asserted(oh)) return 0; pr_debug("omap_hwmod: %s: disabling\n", oh->name); @@ -2608,10 +2682,10 @@ static int _omap2_wait_target_ready(struct omap_hwmod *oh) */ static int _omap4_wait_target_ready(struct omap_hwmod *oh) { - if (!oh || !oh->clkdm) + if (!oh) return -EINVAL; - if (oh->flags & HWMOD_NO_IDLEST) + if (oh->flags & HWMOD_NO_IDLEST || !oh->clkdm) return 0; if (!_find_mpu_rt_port(oh)) |