diff options
Diffstat (limited to 'arch/arm/mach-s5pv210')
28 files changed, 2562 insertions, 163 deletions
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig index af33a1a..0761eac 100644 --- a/arch/arm/mach-s5pv210/Kconfig +++ b/arch/arm/mach-s5pv210/Kconfig @@ -12,18 +12,69 @@ if ARCH_S5PV210 config CPU_S5PV210 bool select PLAT_S5P + select S3C_PL330_DMA + select S5P_EXT_INT help Enable S5PV210 CPU support -choice - prompt "Select machine type" - depends on ARCH_S5PV210 - default MACH_SMDKV210 +config S5PV210_SETUP_I2C1 + bool + help + Common setup code for i2c bus 1. + +config S5PV210_SETUP_I2C2 + bool + help + Common setup code for i2c bus 2. + +config S5PV210_SETUP_FB_24BPP + bool + help + Common setup code for S5PV210 with an 24bpp RGB display helper. + +config S5PV210_SETUP_SDHCI + bool + select S5PV210_SETUP_SDHCI_GPIO + help + Internal helper functions for S5PV210 based SDHCI systems + +config S5PV210_SETUP_SDHCI_GPIO + bool + help + Common setup code for SDHCI gpio. + +# machine support + +config MACH_AQUILA + bool "Samsung Aquila" + select CPU_S5PV210 + select ARCH_SPARSEMEM_ENABLE + select S5PV210_SETUP_FB_24BPP + select S3C_DEV_FB + help + Machine support for the Samsung Aquila target based on S5PC110 SoC + +config MACH_GONI + bool "GONI" + select CPU_S5PV210 + select ARCH_SPARSEMEM_ENABLE + help + Machine support for Samsung GONI board + S5PC110(MCP) is one of package option of S5PV210 + +config S5PC110_DEV_ONENAND + bool + help + Compile in platform device definition for OneNAND1 controller config MACH_SMDKV210 bool "SMDKV210" select CPU_S5PV210 select ARCH_SPARSEMEM_ENABLE + select SAMSUNG_DEV_ADC + select SAMSUNG_DEV_TS + select S3C_DEV_WDT + select HAVE_S3C2410_WATCHDOG help Machine support for Samsung SMDKV210 @@ -31,10 +82,10 @@ config MACH_SMDKC110 bool "SMDKC110" select CPU_S5PV210 select ARCH_SPARSEMEM_ENABLE + select S3C_DEV_WDT + select HAVE_S3C2410_WATCHDOG help Machine support for Samsung SMDKC110 S5PC110(MCP) is one of package option of S5PV210 -endchoice - endif diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile index 8ebf51c..30be9a6 100644 --- a/arch/arm/mach-s5pv210/Makefile +++ b/arch/arm/mach-s5pv210/Makefile @@ -12,9 +12,24 @@ obj- := # Core support for S5PV210 system -obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o +obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o dma.o gpiolib.o +obj-$(CONFIG_CPU_S5PV210) += setup-i2c0.o # machine support +obj-$(CONFIG_MACH_AQUILA) += mach-aquila.o obj-$(CONFIG_MACH_SMDKV210) += mach-smdkv210.o obj-$(CONFIG_MACH_SMDKC110) += mach-smdkc110.o +obj-$(CONFIG_MACH_GONI) += mach-goni.o + +# device support + +obj-y += dev-audio.o +obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o +obj-$(CONFIG_S5PC110_DEV_ONENAND) += dev-onenand.o + +obj-$(CONFIG_S5PV210_SETUP_FB_24BPP) += setup-fb-24bpp.o +obj-$(CONFIG_S5PV210_SETUP_I2C1) += setup-i2c1.o +obj-$(CONFIG_S5PV210_SETUP_I2C2) += setup-i2c2.o +obj-$(CONFIG_S5PV210_SETUP_SDHCI) += setup-sdhci.o +obj-$(CONFIG_S5PV210_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c index ccccae2..154bca4 100644 --- a/arch/arm/mach-s5pv210/clock.c +++ b/arch/arm/mach-s5pv210/clock.c @@ -31,6 +31,128 @@ #include <plat/clock-clksrc.h> #include <plat/s5pv210.h> +static struct clksrc_clk clk_mout_apll = { + .clk = { + .name = "mout_apll", + .id = -1, + }, + .sources = &clk_src_apll, + .reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 }, +}; + +static struct clksrc_clk clk_mout_epll = { + .clk = { + .name = "mout_epll", + .id = -1, + }, + .sources = &clk_src_epll, + .reg_src = { .reg = S5P_CLK_SRC0, .shift = 8, .size = 1 }, +}; + +static struct clksrc_clk clk_mout_mpll = { + .clk = { + .name = "mout_mpll", + .id = -1, + }, + .sources = &clk_src_mpll, + .reg_src = { .reg = S5P_CLK_SRC0, .shift = 4, .size = 1 }, +}; + +static struct clk *clkset_armclk_list[] = { + [0] = &clk_mout_apll.clk, + [1] = &clk_mout_mpll.clk, +}; + +static struct clksrc_sources clkset_armclk = { + .sources = clkset_armclk_list, + .nr_sources = ARRAY_SIZE(clkset_armclk_list), +}; + +static struct clksrc_clk clk_armclk = { + .clk = { + .name = "armclk", + .id = -1, + }, + .sources = &clkset_armclk, + .reg_src = { .reg = S5P_CLK_SRC0, .shift = 16, .size = 1 }, + .reg_div = { .reg = S5P_CLK_DIV0, .shift = 0, .size = 3 }, +}; + +static struct clksrc_clk clk_hclk_msys = { + .clk = { + .name = "hclk_msys", + .id = -1, + .parent = &clk_armclk.clk, + }, + .reg_div = { .reg = S5P_CLK_DIV0, .shift = 8, .size = 3 }, +}; + +static struct clksrc_clk clk_pclk_msys = { + .clk = { + .name = "pclk_msys", + .id = -1, + .parent = &clk_hclk_msys.clk, + }, + .reg_div = { .reg = S5P_CLK_DIV0, .shift = 12, .size = 3 }, +}; + +static struct clksrc_clk clk_sclk_a2m = { + .clk = { + .name = "sclk_a2m", + .id = -1, + .parent = &clk_mout_apll.clk, + }, + .reg_div = { .reg = S5P_CLK_DIV0, .shift = 4, .size = 3 }, +}; + +static struct clk *clkset_hclk_sys_list[] = { + [0] = &clk_mout_mpll.clk, + [1] = &clk_sclk_a2m.clk, +}; + +static struct clksrc_sources clkset_hclk_sys = { + .sources = clkset_hclk_sys_list, + .nr_sources = ARRAY_SIZE(clkset_hclk_sys_list), +}; + +static struct clksrc_clk clk_hclk_dsys = { + .clk = { + .name = "hclk_dsys", + .id = -1, + }, + .sources = &clkset_hclk_sys, + .reg_src = { .reg = S5P_CLK_SRC0, .shift = 20, .size = 1 }, + .reg_div = { .reg = S5P_CLK_DIV0, .shift = 16, .size = 4 }, +}; + +static struct clksrc_clk clk_pclk_dsys = { + .clk = { + .name = "pclk_dsys", + .id = -1, + .parent = &clk_hclk_dsys.clk, + }, + .reg_div = { .reg = S5P_CLK_DIV0, .shift = 20, .size = 3 }, +}; + +static struct clksrc_clk clk_hclk_psys = { + .clk = { + .name = "hclk_psys", + .id = -1, + }, + .sources = &clkset_hclk_sys, + .reg_src = { .reg = S5P_CLK_SRC0, .shift = 24, .size = 1 }, + .reg_div = { .reg = S5P_CLK_DIV0, .shift = 24, .size = 4 }, +}; + +static struct clksrc_clk clk_pclk_psys = { + .clk = { + .name = "pclk_psys", + .id = -1, + .parent = &clk_hclk_psys.clk, + }, + .reg_div = { .reg = S5P_CLK_DIV0, .shift = 28, .size = 3 }, +}; + static int s5pv210_clk_ip0_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKGATE_IP0, clk, enable); @@ -51,176 +173,226 @@ static int s5pv210_clk_ip3_ctrl(struct clk *clk, int enable) return s5p_gatectrl(S5P_CLKGATE_IP3, clk, enable); } -static struct clk clk_h200 = { - .name = "hclk200", +static int s5pv210_clk_ip4_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKGATE_IP4, clk, enable); +} + +static int s5pv210_clk_mask0_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLK_SRC_MASK0, clk, enable); +} + +static struct clk clk_sclk_hdmi27m = { + .name = "sclk_hdmi27m", .id = -1, + .rate = 27000000, }; -static struct clk clk_h100 = { - .name = "hclk100", +static struct clk clk_sclk_hdmiphy = { + .name = "sclk_hdmiphy", .id = -1, }; -static struct clk clk_h166 = { - .name = "hclk166", +static struct clk clk_sclk_usbphy0 = { + .name = "sclk_usbphy0", .id = -1, }; -static struct clk clk_h133 = { - .name = "hclk133", +static struct clk clk_sclk_usbphy1 = { + .name = "sclk_usbphy1", .id = -1, }; -static struct clk clk_p100 = { - .name = "pclk100", +static struct clk clk_pcmcdclk0 = { + .name = "pcmcdclk", .id = -1, }; -static struct clk clk_p83 = { - .name = "pclk83", +static struct clk clk_pcmcdclk1 = { + .name = "pcmcdclk", .id = -1, }; -static struct clk clk_p66 = { - .name = "pclk66", +static struct clk clk_pcmcdclk2 = { + .name = "pcmcdclk", .id = -1, }; -static struct clk *sys_clks[] = { - &clk_h200, - &clk_h100, - &clk_h166, - &clk_h133, - &clk_p100, - &clk_p83, - &clk_p66 +static struct clk *clkset_vpllsrc_list[] = { + [0] = &clk_fin_vpll, + [1] = &clk_sclk_hdmi27m, +}; + +static struct clksrc_sources clkset_vpllsrc = { + .sources = clkset_vpllsrc_list, + .nr_sources = ARRAY_SIZE(clkset_vpllsrc_list), +}; + +static struct clksrc_clk clk_vpllsrc = { + .clk = { + .name = "vpll_src", + .id = -1, + .enable = s5pv210_clk_mask0_ctrl, + .ctrlbit = (1 << 7), + }, + .sources = &clkset_vpllsrc, + .reg_src = { .reg = S5P_CLK_SRC1, .shift = 28, .size = 1 }, +}; + +static struct clk *clkset_sclk_vpll_list[] = { + [0] = &clk_vpllsrc.clk, + [1] = &clk_fout_vpll, +}; + +static struct clksrc_sources clkset_sclk_vpll = { + .sources = clkset_sclk_vpll_list, + .nr_sources = ARRAY_SIZE(clkset_sclk_vpll_list), +}; + +static struct clksrc_clk clk_sclk_vpll = { + .clk = { + .name = "sclk_vpll", + .id = -1, + }, + .sources = &clkset_sclk_vpll, + .reg_src = { .reg = S5P_CLK_SRC0, .shift = 12, .size = 1 }, +}; + +static unsigned long s5pv210_clk_imem_get_rate(struct clk *clk) +{ + return clk_get_rate(clk->parent) / 2; +} + +static struct clk_ops clk_hclk_imem_ops = { + .get_rate = s5pv210_clk_imem_get_rate, }; static struct clk init_clocks_disable[] = { { .name = "rot", .id = -1, - .parent = &clk_h166, + .parent = &clk_hclk_dsys.clk, .enable = s5pv210_clk_ip0_ctrl, .ctrlbit = (1<<29), }, { .name = "otg", .id = -1, - .parent = &clk_h133, + .parent = &clk_hclk_psys.clk, .enable = s5pv210_clk_ip1_ctrl, .ctrlbit = (1<<16), }, { .name = "usb-host", .id = -1, - .parent = &clk_h133, + .parent = &clk_hclk_psys.clk, .enable = s5pv210_clk_ip1_ctrl, .ctrlbit = (1<<17), }, { .name = "lcd", .id = -1, - .parent = &clk_h166, + .parent = &clk_hclk_dsys.clk, .enable = s5pv210_clk_ip1_ctrl, .ctrlbit = (1<<0), }, { .name = "cfcon", .id = 0, - .parent = &clk_h133, + .parent = &clk_hclk_psys.clk, .enable = s5pv210_clk_ip1_ctrl, .ctrlbit = (1<<25), }, { .name = "hsmmc", .id = 0, - .parent = &clk_h133, + .parent = &clk_hclk_psys.clk, .enable = s5pv210_clk_ip2_ctrl, .ctrlbit = (1<<16), }, { .name = "hsmmc", .id = 1, - .parent = &clk_h133, + .parent = &clk_hclk_psys.clk, .enable = s5pv210_clk_ip2_ctrl, .ctrlbit = (1<<17), }, { .name = "hsmmc", .id = 2, - .parent = &clk_h133, + .parent = &clk_hclk_psys.clk, .enable = s5pv210_clk_ip2_ctrl, .ctrlbit = (1<<18), }, { .name = "hsmmc", .id = 3, - .parent = &clk_h133, + .parent = &clk_hclk_psys.clk, .enable = s5pv210_clk_ip2_ctrl, .ctrlbit = (1<<19), }, { .name = "systimer", .id = -1, - .parent = &clk_p66, + .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1<<16), }, { .name = "watchdog", .id = -1, - .parent = &clk_p66, + .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1<<22), }, { .name = "rtc", .id = -1, - .parent = &clk_p66, + .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1<<15), }, { .name = "i2c", .id = 0, - .parent = &clk_p66, + .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1<<7), }, { .name = "i2c", .id = 1, - .parent = &clk_p66, + .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1<<8), }, { .name = "i2c", .id = 2, - .parent = &clk_p66, + .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1<<9), }, { .name = "spi", .id = 0, - .parent = &clk_p66, + .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1<<12), }, { .name = "spi", .id = 1, - .parent = &clk_p66, + .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1<<13), }, { .name = "spi", .id = 2, - .parent = &clk_p66, + .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1<<14), }, { .name = "timers", .id = -1, - .parent = &clk_p66, + .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1<<23), }, { .name = "adc", .id = -1, - .parent = &clk_p66, + .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1<<24), }, { .name = "keypad", .id = -1, - .parent = &clk_p66, + .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1<<21), }, { @@ -246,106 +418,537 @@ static struct clk init_clocks_disable[] = { static struct clk init_clocks[] = { { + .name = "hclk_imem", + .id = -1, + .parent = &clk_hclk_msys.clk, + .ctrlbit = (1 << 5), + .enable = s5pv210_clk_ip0_ctrl, + .ops = &clk_hclk_imem_ops, + }, { .name = "uart", .id = 0, - .parent = &clk_p66, + .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1<<7), }, { .name = "uart", .id = 1, - .parent = &clk_p66, + .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1<<8), }, { .name = "uart", .id = 2, - .parent = &clk_p66, + .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1<<9), }, { .name = "uart", .id = 3, - .parent = &clk_p66, + .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1<<10), }, }; -static struct clksrc_clk clk_mout_apll = { - .clk = { - .name = "mout_apll", +static struct clk *clkset_uart_list[] = { + [6] = &clk_mout_mpll.clk, + [7] = &clk_mout_epll.clk, +}; + +static struct clksrc_sources clkset_uart = { + .sources = clkset_uart_list, + .nr_sources = ARRAY_SIZE(clkset_uart_list), +}; + +static struct clk *clkset_group1_list[] = { + [0] = &clk_sclk_a2m.clk, + [1] = &clk_mout_mpll.clk, + [2] = &clk_mout_epll.clk, + [3] = &clk_sclk_vpll.clk, +}; + +static struct clksrc_sources clkset_group1 = { + .sources = clkset_group1_list, + .nr_sources = ARRAY_SIZE(clkset_group1_list), +}; + +static struct clk *clkset_sclk_onenand_list[] = { + [0] = &clk_hclk_psys.clk, + [1] = &clk_hclk_dsys.clk, +}; + +static struct clksrc_sources clkset_sclk_onenand = { + .sources = clkset_sclk_onenand_list, + .nr_sources = ARRAY_SIZE(clkset_sclk_onenand_list), +}; + +static struct clk *clkset_sclk_dac_list[] = { + [0] = &clk_sclk_vpll.clk, + [1] = &clk_sclk_hdmiphy, +}; + +static struct clksrc_sources clkset_sclk_dac = { + .sources = clkset_sclk_dac_list, + .nr_sources = ARRAY_SIZE(clkset_sclk_dac_list), +}; + +static struct clksrc_clk clk_sclk_dac = { + .clk = { + .name = "sclk_dac", .id = -1, + .ctrlbit = (1 << 10), + .enable = s5pv210_clk_ip1_ctrl, }, - .sources = &clk_src_apll, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 }, + .sources = &clkset_sclk_dac, + .reg_src = { .reg = S5P_CLK_SRC1, .shift = 8, .size = 1 }, }; -static struct clksrc_clk clk_mout_epll = { - .clk = { - .name = "mout_epll", +static struct clksrc_clk clk_sclk_pixel = { + .clk = { + .name = "sclk_pixel", .id = -1, + .parent = &clk_sclk_vpll.clk, }, - .sources = &clk_src_epll, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 8, .size = 1 }, + .reg_div = { .reg = S5P_CLK_DIV1, .shift = 0, .size = 4}, }; -static struct clksrc_clk clk_mout_mpll = { - .clk = { - .name = "mout_mpll", +static struct clk *clkset_sclk_hdmi_list[] = { + [0] = &clk_sclk_pixel.clk, + [1] = &clk_sclk_hdmiphy, +}; + +static struct clksrc_sources clkset_sclk_hdmi = { + .sources = clkset_sclk_hdmi_list, + .nr_sources = ARRAY_SIZE(clkset_sclk_hdmi_list), +}; + +static struct clksrc_clk clk_sclk_hdmi = { + .clk = { + .name = "sclk_hdmi", .id = -1, + .enable = s5pv210_clk_ip1_ctrl, + .ctrlbit = (1 << 11), }, - .sources = &clk_src_mpll, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 4, .size = 1 }, + .sources = &clkset_sclk_hdmi, + .reg_src = { .reg = S5P_CLK_SRC1, .shift = 0, .size = 1 }, }; -static struct clk *clkset_uart_list[] = { +static struct clk *clkset_sclk_mixer_list[] = { + [0] = &clk_sclk_dac.clk, + [1] = &clk_sclk_hdmi.clk, +}; + +static struct clksrc_sources clkset_sclk_mixer = { + .sources = clkset_sclk_mixer_list, + .nr_sources = ARRAY_SIZE(clkset_sclk_mixer_list), +}; + +static struct clk *clkset_sclk_audio0_list[] = { + [0] = &clk_ext_xtal_mux, + [1] = &clk_pcmcdclk0, + [2] = &clk_sclk_hdmi27m, + [3] = &clk_sclk_usbphy0, + [4] = &clk_sclk_usbphy1, + [5] = &clk_sclk_hdmiphy, [6] = &clk_mout_mpll.clk, [7] = &clk_mout_epll.clk, + [8] = &clk_sclk_vpll.clk, }; -static struct clksrc_sources clkset_uart = { - .sources = clkset_uart_list, - .nr_sources = ARRAY_SIZE(clkset_uart_list), +static struct clksrc_sources clkset_sclk_audio0 = { + .sources = clkset_sclk_audio0_list, + .nr_sources = ARRAY_SIZE(clkset_sclk_audio0_list), +}; + +static struct clksrc_clk clk_sclk_audio0 = { + .clk = { + .name = "sclk_audio", + .id = 0, + .enable = s5pv210_clk_ip3_ctrl, + .ctrlbit = (1 << 4), + }, + .sources = &clkset_sclk_audio0, + .reg_src = { .reg = S5P_CLK_SRC6, .shift = 0, .size = 4 }, + .reg_div = { .reg = S5P_CLK_DIV6, .shift = 0, .size = 4 }, +}; + +static struct clk *clkset_sclk_audio1_list[] = { + [0] = &clk_ext_xtal_mux, + [1] = &clk_pcmcdclk1, + [2] = &clk_sclk_hdmi27m, + [3] = &clk_sclk_usbphy0, + [4] = &clk_sclk_usbphy1, + [5] = &clk_sclk_hdmiphy, + [6] = &clk_mout_mpll.clk, + [7] = &clk_mout_epll.clk, + [8] = &clk_sclk_vpll.clk, +}; + +static struct clksrc_sources clkset_sclk_audio1 = { + .sources = clkset_sclk_audio1_list, + .nr_sources = ARRAY_SIZE(clkset_sclk_audio1_list), +}; + +static struct clksrc_clk clk_sclk_audio1 = { + .clk = { + .name = "sclk_audio", + .id = 1, + .enable = s5pv210_clk_ip3_ctrl, + .ctrlbit = (1 << 5), + }, + .sources = &clkset_sclk_audio1, + .reg_src = { .reg = S5P_CLK_SRC6, .shift = 4, .size = 4 }, + .reg_div = { .reg = S5P_CLK_DIV6, .shift = 4, .size = 4 }, +}; + +static struct clk *clkset_sclk_audio2_list[] = { + [0] = &clk_ext_xtal_mux, + [1] = &clk_pcmcdclk0, + [2] = &clk_sclk_hdmi27m, + [3] = &clk_sclk_usbphy0, + [4] = &clk_sclk_usbphy1, + [5] = &clk_sclk_hdmiphy, + [6] = &clk_mout_mpll.clk, + [7] = &clk_mout_epll.clk, + [8] = &clk_sclk_vpll.clk, +}; + +static struct clksrc_sources clkset_sclk_audio2 = { + .sources = clkset_sclk_audio2_list, + .nr_sources = ARRAY_SIZE(clkset_sclk_audio2_list), +}; + +static struct clksrc_clk clk_sclk_audio2 = { + .clk = { + .name = "sclk_audio", + .id = 2, + .enable = s5pv210_clk_ip3_ctrl, + .ctrlbit = (1 << 6), + }, + .sources = &clkset_sclk_audio2, + .reg_src = { .reg = S5P_CLK_SRC6, .shift = 8, .size = 4 }, + .reg_div = { .reg = S5P_CLK_DIV6, .shift = 8, .size = 4 }, +}; + +static struct clk *clkset_sclk_spdif_list[] = { + [0] = &clk_sclk_audio0.clk, + [1] = &clk_sclk_audio1.clk, + [2] = &clk_sclk_audio2.clk, +}; + +static struct clksrc_sources clkset_sclk_spdif = { + .sources = clkset_sclk_spdif_list, + .nr_sources = ARRAY_SIZE(clkset_sclk_spdif_list), +}; + +static struct clk *clkset_group2_list[] = { + [0] = &clk_ext_xtal_mux, + [1] = &clk_xusbxti, + [2] = &clk_sclk_hdmi27m, + [3] = &clk_sclk_usbphy0, + [4] = &clk_sclk_usbphy1, + [5] = &clk_sclk_hdmiphy, + [6] = &clk_mout_mpll.clk, + [7] = &clk_mout_epll.clk, + [8] = &clk_sclk_vpll.clk, +}; + +static struct clksrc_sources clkset_group2 = { + .sources = clkset_group2_list, + .nr_sources = ARRAY_SIZE(clkset_group2_list), }; static struct clksrc_clk clksrcs[] = { { .clk = { - .name = "uclk1", + .name = "sclk_dmc", .id = -1, + }, + .sources = &clkset_group1, + .reg_src = { .reg = S5P_CLK_SRC6, .shift = 24, .size = 2 }, + .reg_div = { .reg = S5P_CLK_DIV6, .shift = 28, .size = 4 }, + }, { + .clk = { + .name = "sclk_onenand", + .id = -1, + }, + .sources = &clkset_sclk_onenand, + .reg_src = { .reg = S5P_CLK_SRC0, .shift = 28, .size = 1 }, + .reg_div = { .reg = S5P_CLK_DIV6, .shift = 12, .size = 3 }, + }, { + .clk = { + .name = "uclk1", + .id = 0, .ctrlbit = (1<<17), .enable = s5pv210_clk_ip3_ctrl, }, .sources = &clkset_uart, .reg_src = { .reg = S5P_CLK_SRC4, .shift = 16, .size = 4 }, .reg_div = { .reg = S5P_CLK_DIV4, .shift = 16, .size = 4 }, - } + }, { + .clk = { + .name = "uclk1", + .id = 1, + .enable = s5pv210_clk_ip3_ctrl, + .ctrlbit = (1 << 18), + }, + .sources = &clkset_uart, + .reg_src = { .reg = S5P_CLK_SRC4, .shift = 20, .size = 4 }, + .reg_div = { .reg = S5P_CLK_DIV4, .shift = 20, .size = 4 }, + }, { + .clk = { + .name = "uclk1", + .id = 2, + .enable = s5pv210_clk_ip3_ctrl, + .ctrlbit = (1 << 19), + }, + .sources = &clkset_uart, + .reg_src = { .reg = S5P_CLK_SRC4, .shift = 24, .size = 4 }, + .reg_div = { .reg = S5P_CLK_DIV4, .shift = 24, .size = 4 }, + }, { + .clk = { + .name = "uclk1", + .id = 3, + .enable = s5pv210_clk_ip3_ctrl, + .ctrlbit = (1 << 20), + }, + .sources = &clkset_uart, + .reg_src = { .reg = S5P_CLK_SRC4, .shift = 28, .size = 4 }, + .reg_div = { .reg = S5P_CLK_DIV4, .shift = 28, .size = 4 }, + }, { + .clk = { + .name = "sclk_mixer", + .id = -1, + .enable = s5pv210_clk_ip1_ctrl, + .ctrlbit = (1 << 9), + }, + .sources = &clkset_sclk_mixer, + .reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 1 }, + }, { + .clk = { + .name = "sclk_spdif", + .id = -1, + .enable = s5pv210_clk_mask0_ctrl, + .ctrlbit = (1 << 27), + }, + .sources = &clkset_sclk_spdif, + .reg_src = { .reg = S5P_CLK_SRC6, .shift = 12, .size = 2 }, + }, { + .clk = { + .name = "sclk_fimc", + .id = 0, + .enable = s5pv210_clk_ip0_ctrl, + .ctrlbit = (1 << 24), + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P_CLK_SRC3, .shift = 12, .size = 4 }, + .reg_div = { .reg = S5P_CLK_DIV3, .shift = 12, .size = 4 }, + }, { + .clk = { + .name = "sclk_fimc", + .id = 1, + .enable = s5pv210_clk_ip0_ctrl, + .ctrlbit = (1 << 25), + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P_CLK_SRC3, .shift = 16, .size = 4 }, + .reg_div = { .reg = S5P_CLK_DIV3, .shift = 16, .size = 4 }, + }, { + .clk = { + .name = "sclk_fimc", + .id = 2, + .enable = s5pv210_clk_ip0_ctrl, + .ctrlbit = (1 << 26), + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P_CLK_SRC3, .shift = 20, .size = 4 }, + .reg_div = { .reg = S5P_CLK_DIV3, .shift = 20, .size = 4 }, + }, { + .clk = { + .name = "sclk_cam", + .id = 0, + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P_CLK_SRC1, .shift = 12, .size = 4 }, + .reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 4 }, + }, { + .clk = { + .name = "sclk_cam", + .id = 1, + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P_CLK_SRC1, .shift = 16, .size = 4 }, + .reg_div = { .reg = S5P_CLK_DIV1, .shift = 16, .size = 4 }, + }, { + .clk = { + .name = "sclk_fimd", + .id = -1, + .enable = s5pv210_clk_ip1_ctrl, + .ctrlbit = (1 << 0), + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P_CLK_SRC1, .shift = 20, .size = 4 }, + .reg_div = { .reg = S5P_CLK_DIV1, .shift = 20, .size = 4 }, + }, { + .clk = { + .name = "sclk_mmc", + .id = 0, + .enable = s5pv210_clk_ip2_ctrl, + .ctrlbit = (1 << 16), + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P_CLK_SRC4, .shift = 0, .size = 4 }, + .reg_div = { .reg = S5P_CLK_DIV4, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_mmc", + .id = 1, + .enable = s5pv210_clk_ip2_ctrl, + .ctrlbit = (1 << 17), + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P_CLK_SRC4, .shift = 4, .size = 4 }, + .reg_div = { .reg = S5P_CLK_DIV4, .shift = 4, .size = 4 }, + }, { + .clk = { + .name = "sclk_mmc", + .id = 2, + .enable = s5pv210_clk_ip2_ctrl, + .ctrlbit = (1 << 18), + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P_CLK_SRC4, .shift = 8, .size = 4 }, + .reg_div = { .reg = S5P_CLK_DIV4, .shift = 8, .size = 4 }, + }, { + .clk = { + .name = "sclk_mmc", + .id = 3, + .enable = s5pv210_clk_ip2_ctrl, + .ctrlbit = (1 << 19), + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P_CLK_SRC4, .shift = 12, .size = 4 }, + .reg_div = { .reg = S5P_CLK_DIV4, .shift = 12, .size = 4 }, + }, { + .clk = { + .name = "sclk_mfc", + .id = -1, + .enable = s5pv210_clk_ip0_ctrl, + .ctrlbit = (1 << 16), + }, + .sources = &clkset_group1, + .reg_src = { .reg = S5P_CLK_SRC2, .shift = 4, .size = 2 }, + .reg_div = { .reg = S5P_CLK_DIV2, .shift = 4, .size = 4 }, + }, { + .clk = { + .name = "sclk_g2d", + .id = -1, + .enable = s5pv210_clk_ip0_ctrl, + .ctrlbit = (1 << 12), + }, + .sources = &clkset_group1, + .reg_src = { .reg = S5P_CLK_SRC2, .shift = 8, .size = 2 }, + .reg_div = { .reg = S5P_CLK_DIV2, .shift = 8, .size = 4 }, + }, { + .clk = { + .name = "sclk_g3d", + .id = -1, + .enable = s5pv210_clk_ip0_ctrl, + .ctrlbit = (1 << 8), + }, + .sources = &clkset_group1, + .reg_src = { .reg = S5P_CLK_SRC2, .shift = 0, .size = 2 }, + .reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_csis", + .id = -1, + .enable = s5pv210_clk_ip0_ctrl, + .ctrlbit = (1 << 31), + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P_CLK_SRC1, .shift = 24, .size = 4 }, + .reg_div = { .reg = S5P_CLK_DIV1, .shift = 28, .size = 4 }, + }, { + .clk = { + .name = "sclk_spi", + .id = 0, + .enable = s5pv210_clk_ip3_ctrl, + .ctrlbit = (1 << 12), + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P_CLK_SRC5, .shift = 0, .size = 4 }, + .reg_div = { .reg = S5P_CLK_DIV5, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_spi", + .id = 1, + .enable = s5pv210_clk_ip3_ctrl, + .ctrlbit = (1 << 13), + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P_CLK_SRC5, .shift = 4, .size = 4 }, + .reg_div = { .reg = S5P_CLK_DIV5, .shift = 4, .size = 4 }, + }, { + .clk = { + .name = "sclk_pwi", + .id = -1, + .enable = &s5pv210_clk_ip4_ctrl, + .ctrlbit = (1 << 2), + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P_CLK_SRC6, .shift = 20, .size = 4 }, + .reg_div = { .reg = S5P_CLK_DIV6, .shift = 24, .size = 4 }, + }, { + .clk = { + .name = "sclk_pwm", + .id = -1, + .enable = s5pv210_clk_ip3_ctrl, + .ctrlbit = (1 << 23), + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P_CLK_SRC5, .shift = 12, .size = 4 }, + .reg_div = { .reg = S5P_CLK_DIV5, .shift = 12, .size = 4 }, + }, }; /* Clock initialisation code */ -static struct clksrc_clk *init_parents[] = { +static struct clksrc_clk *sysclks[] = { &clk_mout_apll, &clk_mout_epll, &clk_mout_mpll, + &clk_armclk, + &clk_hclk_msys, + &clk_sclk_a2m, + &clk_hclk_dsys, + &clk_hclk_psys, + &clk_pclk_msys, + &clk_pclk_dsys, + &clk_pclk_psys, + &clk_vpllsrc, + &clk_sclk_vpll, + &clk_sclk_dac, + &clk_sclk_pixel, + &clk_sclk_hdmi, }; -#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1) - void __init_or_cpufreq s5pv210_setup_clocks(void) { struct clk *xtal_clk; unsigned long xtal; + unsigned long vpllsrc; unsigned long armclk; - unsigned long hclk200; - unsigned long hclk166; - unsigned long hclk133; - unsigned long pclk100; - unsigned long pclk83; - unsigned long pclk66; + unsigned long hclk_msys; + unsigned long hclk_dsys; + unsigned long hclk_psys; + unsigned long pclk_msys; + unsigned long pclk_dsys; + unsigned long pclk_psys; unsigned long apll; unsigned long mpll; unsigned long epll; + unsigned long vpll; unsigned int ptr; u32 clkdiv0, clkdiv1; @@ -368,59 +971,46 @@ void __init_or_cpufreq s5pv210_setup_clocks(void) apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4508); mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502); epll = s5p_get_pll45xx(xtal, __raw_readl(S5P_EPLL_CON), pll_4500); - - printk(KERN_INFO "S5PV210: PLL settings, A=%ld, M=%ld, E=%ld", - apll, mpll, epll); - - armclk = apll / GET_DIV(clkdiv0, S5P_CLKDIV0_APLL); - if (__raw_readl(S5P_CLK_SRC0) & S5P_CLKSRC0_MUX200_MASK) - hclk200 = mpll / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK200); - else - hclk200 = armclk / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK200); - - if (__raw_readl(S5P_CLK_SRC0) & S5P_CLKSRC0_MUX166_MASK) { - hclk166 = apll / GET_DIV(clkdiv0, S5P_CLKDIV0_A2M); - hclk166 = hclk166 / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK166); - } else - hclk166 = mpll / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK166); - - if (__raw_readl(S5P_CLK_SRC0) & S5P_CLKSRC0_MUX133_MASK) { - hclk133 = apll / GET_DIV(clkdiv0, S5P_CLKDIV0_A2M); - hclk133 = hclk133 / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK133); - } else - hclk133 = mpll / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK133); - - pclk100 = hclk200 / GET_DIV(clkdiv0, S5P_CLKDIV0_PCLK100); - pclk83 = hclk166 / GET_DIV(clkdiv0, S5P_CLKDIV0_PCLK83); - pclk66 = hclk133 / GET_DIV(clkdiv0, S5P_CLKDIV0_PCLK66); - - printk(KERN_INFO "S5PV210: ARMCLK=%ld, HCLKM=%ld, HCLKD=%ld, \ - HCLKP=%ld, PCLKM=%ld, PCLKD=%ld, PCLKP=%ld\n", - armclk, hclk200, hclk166, hclk133, pclk100, pclk83, pclk66); + vpllsrc = clk_get_rate(&clk_vpllsrc.clk); + vpll = s5p_get_pll45xx(vpllsrc, __raw_readl(S5P_VPLL_CON), pll_4502); clk_fout_apll.rate = apll; clk_fout_mpll.rate = mpll; clk_fout_epll.rate = epll; + clk_fout_vpll.rate = vpll; - clk_f.rate = armclk; - clk_h.rate = hclk133; - clk_p.rate = pclk66; - clk_p66.rate = pclk66; - clk_p83.rate = pclk83; - clk_h133.rate = hclk133; - clk_h166.rate = hclk166; - clk_h200.rate = hclk200; + printk(KERN_INFO "S5PV210: PLL settings, A=%ld, M=%ld, E=%ld V=%ld", + apll, mpll, epll, vpll); + + armclk = clk_get_rate(&clk_armclk.clk); + hclk_msys = clk_get_rate(&clk_hclk_msys.clk); + hclk_dsys = clk_get_rate(&clk_hclk_dsys.clk); + hclk_psys = clk_get_rate(&clk_hclk_psys.clk); + pclk_msys = clk_get_rate(&clk_pclk_msys.clk); + pclk_dsys = clk_get_rate(&clk_pclk_dsys.clk); + pclk_psys = clk_get_rate(&clk_pclk_psys.clk); + + printk(KERN_INFO "S5PV210: ARMCLK=%ld, HCLKM=%ld, HCLKD=%ld\n" + "HCLKP=%ld, PCLKM=%ld, PCLKD=%ld, PCLKP=%ld\n", + armclk, hclk_msys, hclk_dsys, hclk_psys, + pclk_msys, pclk_dsys, pclk_psys); - for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++) - s3c_set_clksrc(init_parents[ptr], true); + clk_f.rate = armclk; + clk_h.rate = hclk_psys; + clk_p.rate = pclk_psys; for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) s3c_set_clksrc(&clksrcs[ptr], true); } static struct clk *clks[] __initdata = { - &clk_mout_epll.clk, - &clk_mout_mpll.clk, + &clk_sclk_hdmi27m, + &clk_sclk_hdmiphy, + &clk_sclk_usbphy0, + &clk_sclk_usbphy1, + &clk_pcmcdclk0, + &clk_pcmcdclk1, + &clk_pcmcdclk2, }; void __init s5pv210_register_clocks(void) @@ -433,13 +1023,12 @@ void __init s5pv210_register_clocks(void) if (ret > 0) printk(KERN_ERR "Failed to register %u clocks\n", ret); + for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++) + s3c_register_clksrc(sysclks[ptr], 1); + s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); - ret = s3c24xx_register_clocks(sys_clks, ARRAY_SIZE(sys_clks)); - if (ret > 0) - printk(KERN_ERR "Failed to register system clocks\n"); - clkp = init_clocks_disable; for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { ret = s3c24xx_register_clock(clkp); diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c index 0e0f8fd..411a4a9 100644 --- a/arch/arm/mach-s5pv210/cpu.c +++ b/arch/arm/mach-s5pv210/cpu.c @@ -32,6 +32,8 @@ #include <plat/devs.h> #include <plat/clock.h> #include <plat/s5pv210.h> +#include <plat/iic-core.h> +#include <plat/sdhci.h> /* Initial IO mappings */ @@ -74,7 +76,21 @@ static void s5pv210_idle(void) void __init s5pv210_map_io(void) { +#ifdef CONFIG_S3C_DEV_ADC + s3c_device_adc.name = "s3c64xx-adc"; +#endif + iotable_init(s5pv210_iodesc, ARRAY_SIZE(s5pv210_iodesc)); + + /* initialise device information early */ + s5pv210_default_sdhci0(); + s5pv210_default_sdhci1(); + s5pv210_default_sdhci2(); + + /* the i2c devices are directly compatible with s3c2440 */ + s3c_i2c0_setname("s3c2440-i2c"); + s3c_i2c1_setname("s3c2440-i2c"); + s3c_i2c2_setname("s3c2440-i2c"); } void __init s5pv210_init_clocks(int xtal) @@ -100,7 +116,7 @@ void __init s5pv210_init_irq(void) s5p_init_irq(vic, ARRAY_SIZE(vic)); } -static struct sysdev_class s5pv210_sysclass = { +struct sysdev_class s5pv210_sysclass = { .name = "s5pv210-core", }; diff --git a/arch/arm/mach-s5pv210/dev-audio.c b/arch/arm/mach-s5pv210/dev-audio.c new file mode 100644 index 0000000..6e21533 --- /dev/null +++ b/arch/arm/mach-s5pv210/dev-audio.c @@ -0,0 +1,327 @@ +/* linux/arch/arm/mach-s5pv210/dev-audio.c + * + * Copyright (c) 2010 Samsung Electronics Co. Ltd + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> + +#include <plat/gpio-cfg.h> +#include <plat/audio.h> + +#include <mach/gpio.h> +#include <mach/map.h> +#include <mach/dma.h> +#include <mach/irqs.h> + +static int s5pv210_cfg_i2s(struct platform_device *pdev) +{ + /* configure GPIO for i2s port */ + switch (pdev->id) { + case 1: + s3c_gpio_cfgpin(S5PV210_GPC0(0), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5PV210_GPC0(1), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5PV210_GPC0(2), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5PV210_GPC0(3), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5PV210_GPC0(4), S3C_GPIO_SFN(2)); + break; + + case 2: + s3c_gpio_cfgpin(S5PV210_GPC1(0), S3C_GPIO_SFN(4)); + s3c_gpio_cfgpin(S5PV210_GPC1(1), S3C_GPIO_SFN(4)); + s3c_gpio_cfgpin(S5PV210_GPC1(2), S3C_GPIO_SFN(4)); + s3c_gpio_cfgpin(S5PV210_GPC1(3), S3C_GPIO_SFN(4)); + s3c_gpio_cfgpin(S5PV210_GPC1(4), S3C_GPIO_SFN(4)); + break; + + case -1: + s3c_gpio_cfgpin(S5PV210_GPI(0), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5PV210_GPI(1), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5PV210_GPI(2), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5PV210_GPI(3), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5PV210_GPI(4), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5PV210_GPI(5), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5PV210_GPI(6), S3C_GPIO_SFN(2)); + break; + + default: + printk(KERN_ERR "Invalid Device %d\n", pdev->id); + return -EINVAL; + } + + return 0; +} + +static struct s3c_audio_pdata s3c_i2s_pdata = { + .cfg_gpio = s5pv210_cfg_i2s, +}; + +static struct resource s5pv210_iis0_resource[] = { + [0] = { + .start = S5PV210_PA_IIS0, + .end = S5PV210_PA_IIS0 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_I2S0_TX, + .end = DMACH_I2S0_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_I2S0_RX, + .end = DMACH_I2S0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device s5pv210_device_iis0 = { + .name = "s3c64xx-iis-v4", + .id = -1, + .num_resources = ARRAY_SIZE(s5pv210_iis0_resource), + .resource = s5pv210_iis0_resource, + .dev = { + .platform_data = &s3c_i2s_pdata, + }, +}; + +static struct resource s5pv210_iis1_resource[] = { + [0] = { + .start = S5PV210_PA_IIS1, + .end = S5PV210_PA_IIS1 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_I2S1_TX, + .end = DMACH_I2S1_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_I2S1_RX, + .end = DMACH_I2S1_RX, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device s5pv210_device_iis1 = { + .name = "s3c64xx-iis", + .id = 1, + .num_resources = ARRAY_SIZE(s5pv210_iis1_resource), + .resource = s5pv210_iis1_resource, + .dev = { + .platform_data = &s3c_i2s_pdata, + }, +}; + +static struct resource s5pv210_iis2_resource[] = { + [0] = { + .start = S5PV210_PA_IIS2, + .end = S5PV210_PA_IIS2 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_I2S2_TX, + .end = DMACH_I2S2_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_I2S2_RX, + .end = DMACH_I2S2_RX, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device s5pv210_device_iis2 = { + .name = "s3c64xx-iis", + .id = 2, + .num_resources = ARRAY_SIZE(s5pv210_iis2_resource), + .resource = s5pv210_iis2_resource, + .dev = { + .platform_data = &s3c_i2s_pdata, + }, +}; + +/* PCM Controller platform_devices */ + +static int s5pv210_pcm_cfg_gpio(struct platform_device *pdev) +{ + switch (pdev->id) { + case 0: + s3c_gpio_cfgpin(S5PV210_GPI(0), S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin(S5PV210_GPI(1), S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin(S5PV210_GPI(2), S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin(S5PV210_GPI(3), S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin(S5PV210_GPI(4), S3C_GPIO_SFN(3)); + break; + case 1: + s3c_gpio_cfgpin(S5PV210_GPC0(0), S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin(S5PV210_GPC0(1), S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin(S5PV210_GPC0(2), S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin(S5PV210_GPC0(3), S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin(S5PV210_GPC0(4), S3C_GPIO_SFN(3)); + break; + case 2: + s3c_gpio_cfgpin(S5PV210_GPC1(0), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5PV210_GPC1(1), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5PV210_GPC1(2), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5PV210_GPC1(3), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5PV210_GPC1(4), S3C_GPIO_SFN(2)); + break; + default: + printk(KERN_DEBUG "Invalid PCM Controller number!"); + return -EINVAL; + } + + return 0; +} + +static struct s3c_audio_pdata s3c_pcm_pdata = { + .cfg_gpio = s5pv210_pcm_cfg_gpio, +}; + +static struct resource s5pv210_pcm0_resource[] = { + [0] = { + .start = S5PV210_PA_PCM0, + .end = S5PV210_PA_PCM0 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_PCM0_TX, + .end = DMACH_PCM0_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_PCM0_RX, + .end = DMACH_PCM0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device s5pv210_device_pcm0 = { + .name = "samsung-pcm", + .id = 0, + .num_resources = ARRAY_SIZE(s5pv210_pcm0_resource), + .resource = s5pv210_pcm0_resource, + .dev = { + .platform_data = &s3c_pcm_pdata, + }, +}; + +static struct resource s5pv210_pcm1_resource[] = { + [0] = { + .start = S5PV210_PA_PCM1, + .end = S5PV210_PA_PCM1 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_PCM1_TX, + .end = DMACH_PCM1_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_PCM1_RX, + .end = DMACH_PCM1_RX, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device s5pv210_device_pcm1 = { + .name = "samsung-pcm", + .id = 1, + .num_resources = ARRAY_SIZE(s5pv210_pcm1_resource), + .resource = s5pv210_pcm1_resource, + .dev = { + .platform_data = &s3c_pcm_pdata, + }, +}; + +static struct resource s5pv210_pcm2_resource[] = { + [0] = { + .start = S5PV210_PA_PCM2, + .end = S5PV210_PA_PCM2 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_PCM2_TX, + .end = DMACH_PCM2_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_PCM2_RX, + .end = DMACH_PCM2_RX, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device s5pv210_device_pcm2 = { + .name = "samsung-pcm", + .id = 2, + .num_resources = ARRAY_SIZE(s5pv210_pcm2_resource), + .resource = s5pv210_pcm2_resource, + .dev = { + .platform_data = &s3c_pcm_pdata, + }, +}; + +/* AC97 Controller platform devices */ + +static int s5pv210_ac97_cfg_gpio(struct platform_device *pdev) +{ + s3c_gpio_cfgpin(S5PV210_GPC0(0), S3C_GPIO_SFN(4)); + s3c_gpio_cfgpin(S5PV210_GPC0(1), S3C_GPIO_SFN(4)); + s3c_gpio_cfgpin(S5PV210_GPC0(2), S3C_GPIO_SFN(4)); + s3c_gpio_cfgpin(S5PV210_GPC0(3), S3C_GPIO_SFN(4)); + s3c_gpio_cfgpin(S5PV210_GPC0(4), S3C_GPIO_SFN(4)); + + return 0; +} + +static struct resource s5pv210_ac97_resource[] = { + [0] = { + .start = S5PV210_PA_AC97, + .end = S5PV210_PA_AC97 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_AC97_PCMOUT, + .end = DMACH_AC97_PCMOUT, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_AC97_PCMIN, + .end = DMACH_AC97_PCMIN, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = DMACH_AC97_MICIN, + .end = DMACH_AC97_MICIN, + .flags = IORESOURCE_DMA, + }, + [4] = { + .start = IRQ_AC97, + .end = IRQ_AC97, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct s3c_audio_pdata s3c_ac97_pdata = { + .cfg_gpio = s5pv210_ac97_cfg_gpio, +}; + +static u64 s5pv210_ac97_dmamask = DMA_BIT_MASK(32); + +struct platform_device s5pv210_device_ac97 = { + .name = "s3c-ac97", + .id = -1, + .num_resources = ARRAY_SIZE(s5pv210_ac97_resource), + .resource = s5pv210_ac97_resource, + .dev = { + .platform_data = &s3c_ac97_pdata, + .dma_mask = &s5pv210_ac97_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; diff --git a/arch/arm/mach-s5pv210/dev-onenand.c b/arch/arm/mach-s5pv210/dev-onenand.c new file mode 100644 index 0000000..34997b7 --- /dev/null +++ b/arch/arm/mach-s5pv210/dev-onenand.c @@ -0,0 +1,50 @@ +/* + * linux/arch/arm/mach-s5pv210/dev-onenand.c + * + * Copyright (c) 2008-2010 Samsung Electronics + * Kyungmin Park <kyungmin.park@samsung.com> + * + * S5PC110 series device definition for OneNAND devices + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/onenand.h> + +#include <mach/irqs.h> +#include <mach/map.h> + +static struct resource s5pc110_onenand_resources[] = { + [0] = { + .start = S5PC110_PA_ONENAND, + .end = S5PC110_PA_ONENAND + SZ_128K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = S5PC110_PA_ONENAND_DMA, + .end = S5PC110_PA_ONENAND_DMA + SZ_2K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device s5pc110_device_onenand = { + .name = "s5pc110-onenand", + .id = -1, + .num_resources = ARRAY_SIZE(s5pc110_onenand_resources), + .resource = s5pc110_onenand_resources, +}; + +void s5pc110_onenand_set_platdata(struct onenand_platform_data *pdata) +{ + struct onenand_platform_data *pd; + + pd = kmemdup(pdata, sizeof(struct onenand_platform_data), GFP_KERNEL); + if (!pd) + printk(KERN_ERR "%s: no memory for platform data\n", __func__); + s5pc110_device_onenand.dev.platform_data = pd; +} diff --git a/arch/arm/mach-s5pv210/dev-spi.c b/arch/arm/mach-s5pv210/dev-spi.c new file mode 100644 index 0000000..337a62b --- /dev/null +++ b/arch/arm/mach-s5pv210/dev-spi.c @@ -0,0 +1,178 @@ +/* linux/arch/arm/mach-s5pv210/dev-spi.c + * + * Copyright (C) 2010 Samsung Electronics Co. Ltd. + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> + +#include <mach/dma.h> +#include <mach/map.h> +#include <mach/irqs.h> +#include <mach/gpio.h> +#include <mach/spi-clocks.h> + +#include <plat/s3c64xx-spi.h> +#include <plat/gpio-cfg.h> + +static char *spi_src_clks[] = { + [S5PV210_SPI_SRCCLK_PCLK] = "pclk", + [S5PV210_SPI_SRCCLK_SCLK] = "sclk_spi", +}; + +/* SPI Controller platform_devices */ + +/* Since we emulate multi-cs capability, we do not touch the CS. + * The emulated CS is toggled by board specific mechanism, as it can + * be either some immediate GPIO or some signal out of some other + * chip in between ... or some yet another way. + * We simply do not assume anything about CS. + */ +static int s5pv210_spi_cfg_gpio(struct platform_device *pdev) +{ + switch (pdev->id) { + case 0: + s3c_gpio_cfgpin(S5PV210_GPB(0), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5PV210_GPB(1), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5PV210_GPB(2), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5PV210_GPB(0), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5PV210_GPB(1), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5PV210_GPB(2), S3C_GPIO_PULL_UP); + break; + + case 1: + s3c_gpio_cfgpin(S5PV210_GPB(4), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5PV210_GPB(5), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5PV210_GPB(6), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5PV210_GPB(4), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5PV210_GPB(5), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5PV210_GPB(6), S3C_GPIO_PULL_UP); + break; + + default: + dev_err(&pdev->dev, "Invalid SPI Controller number!"); + return -EINVAL; + } + + return 0; +} + +static struct resource s5pv210_spi0_resource[] = { + [0] = { + .start = S5PV210_PA_SPI0, + .end = S5PV210_PA_SPI0 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_SPI0_TX, + .end = DMACH_SPI0_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_SPI0_RX, + .end = DMACH_SPI0_RX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = IRQ_SPI0, + .end = IRQ_SPI0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct s3c64xx_spi_info s5pv210_spi0_pdata = { + .cfg_gpio = s5pv210_spi_cfg_gpio, + .fifo_lvl_mask = 0x1ff, + .rx_lvl_offset = 15, + .high_speed = 1, +}; + +static u64 spi_dmamask = DMA_BIT_MASK(32); + +struct platform_device s5pv210_device_spi0 = { + .name = "s3c64xx-spi", + .id = 0, + .num_resources = ARRAY_SIZE(s5pv210_spi0_resource), + .resource = s5pv210_spi0_resource, + .dev = { + .dma_mask = &spi_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &s5pv210_spi0_pdata, + }, +}; + +static struct resource s5pv210_spi1_resource[] = { + [0] = { + .start = S5PV210_PA_SPI1, + .end = S5PV210_PA_SPI1 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_SPI1_TX, + .end = DMACH_SPI1_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_SPI1_RX, + .end = DMACH_SPI1_RX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = IRQ_SPI1, + .end = IRQ_SPI1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct s3c64xx_spi_info s5pv210_spi1_pdata = { + .cfg_gpio = s5pv210_spi_cfg_gpio, + .fifo_lvl_mask = 0x7f, + .rx_lvl_offset = 15, + .high_speed = 1, +}; + +struct platform_device s5pv210_device_spi1 = { + .name = "s3c64xx-spi", + .id = 1, + .num_resources = ARRAY_SIZE(s5pv210_spi1_resource), + .resource = s5pv210_spi1_resource, + .dev = { + .dma_mask = &spi_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &s5pv210_spi1_pdata, + }, +}; + +void __init s5pv210_spi_set_info(int cntrlr, int src_clk_nr, int num_cs) +{ + struct s3c64xx_spi_info *pd; + + /* Reject invalid configuration */ + if (!num_cs || src_clk_nr < 0 + || src_clk_nr > S5PV210_SPI_SRCCLK_SCLK) { + printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__); + return; + } + + switch (cntrlr) { + case 0: + pd = &s5pv210_spi0_pdata; + break; + case 1: + pd = &s5pv210_spi1_pdata; + break; + default: + printk(KERN_ERR "%s: Invalid SPI controller(%d)\n", + __func__, cntrlr); + return; + } + + pd->num_cs = num_cs; + pd->src_clk_nr = src_clk_nr; + pd->src_clk_name = spi_src_clks[src_clk_nr]; +} diff --git a/arch/arm/mach-s5pv210/dma.c b/arch/arm/mach-s5pv210/dma.c new file mode 100644 index 0000000..778ad5f --- /dev/null +++ b/arch/arm/mach-s5pv210/dma.c @@ -0,0 +1,168 @@ +/* + * Copyright (C) 2010 Samsung Electronics Co. Ltd. + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> + +#include <plat/devs.h> +#include <plat/irqs.h> + +#include <mach/map.h> +#include <mach/irqs.h> + +#include <plat/s3c-pl330-pdata.h> + +static u64 dma_dmamask = DMA_BIT_MASK(32); + +static struct resource s5pv210_pdma0_resource[] = { + [0] = { + .start = S5PV210_PA_PDMA0, + .end = S5PV210_PA_PDMA0 + SZ_4K, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_PDMA0, + .end = IRQ_PDMA0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct s3c_pl330_platdata s5pv210_pdma0_pdata = { + .peri = { + [0] = DMACH_UART0_RX, + [1] = DMACH_UART0_TX, + [2] = DMACH_UART1_RX, + [3] = DMACH_UART1_TX, + [4] = DMACH_UART2_RX, + [5] = DMACH_UART2_TX, + [6] = DMACH_UART3_RX, + [7] = DMACH_UART3_TX, + [8] = DMACH_MAX, + [9] = DMACH_I2S0_RX, + [10] = DMACH_I2S0_TX, + [11] = DMACH_I2S0S_TX, + [12] = DMACH_I2S1_RX, + [13] = DMACH_I2S1_TX, + [14] = DMACH_MAX, + [15] = DMACH_MAX, + [16] = DMACH_SPI0_RX, + [17] = DMACH_SPI0_TX, + [18] = DMACH_SPI1_RX, + [19] = DMACH_SPI1_TX, + [20] = DMACH_MAX, + [21] = DMACH_MAX, + [22] = DMACH_AC97_MICIN, + [23] = DMACH_AC97_PCMIN, + [24] = DMACH_AC97_PCMOUT, + [25] = DMACH_MAX, + [26] = DMACH_PWM, + [27] = DMACH_SPDIF, + [28] = DMACH_MAX, + [29] = DMACH_MAX, + [30] = DMACH_MAX, + [31] = DMACH_MAX, + }, +}; + +static struct platform_device s5pv210_device_pdma0 = { + .name = "s3c-pl330", + .id = 1, + .num_resources = ARRAY_SIZE(s5pv210_pdma0_resource), + .resource = s5pv210_pdma0_resource, + .dev = { + .dma_mask = &dma_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &s5pv210_pdma0_pdata, + }, +}; + +static struct resource s5pv210_pdma1_resource[] = { + [0] = { + .start = S5PV210_PA_PDMA1, + .end = S5PV210_PA_PDMA1 + SZ_4K, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_PDMA1, + .end = IRQ_PDMA1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct s3c_pl330_platdata s5pv210_pdma1_pdata = { + .peri = { + [0] = DMACH_UART0_RX, + [1] = DMACH_UART0_TX, + [2] = DMACH_UART1_RX, + [3] = DMACH_UART1_TX, + [4] = DMACH_UART2_RX, + [5] = DMACH_UART2_TX, + [6] = DMACH_UART3_RX, + [7] = DMACH_UART3_TX, + [8] = DMACH_MAX, + [9] = DMACH_I2S0_RX, + [10] = DMACH_I2S0_TX, + [11] = DMACH_I2S0S_TX, + [12] = DMACH_I2S1_RX, + [13] = DMACH_I2S1_TX, + [14] = DMACH_I2S2_RX, + [15] = DMACH_I2S2_TX, + [16] = DMACH_SPI0_RX, + [17] = DMACH_SPI0_TX, + [18] = DMACH_SPI1_RX, + [19] = DMACH_SPI1_TX, + [20] = DMACH_MAX, + [21] = DMACH_MAX, + [22] = DMACH_PCM0_RX, + [23] = DMACH_PCM0_TX, + [24] = DMACH_PCM1_RX, + [25] = DMACH_PCM1_TX, + [26] = DMACH_MSM_REQ0, + [27] = DMACH_MSM_REQ1, + [28] = DMACH_MSM_REQ2, + [29] = DMACH_MSM_REQ3, + [30] = DMACH_PCM2_RX, + [31] = DMACH_PCM2_TX, + }, +}; + +static struct platform_device s5pv210_device_pdma1 = { + .name = "s3c-pl330", + .id = 2, + .num_resources = ARRAY_SIZE(s5pv210_pdma1_resource), + .resource = s5pv210_pdma1_resource, + .dev = { + .dma_mask = &dma_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &s5pv210_pdma1_pdata, + }, +}; + +static struct platform_device *s5pv210_dmacs[] __initdata = { + &s5pv210_device_pdma0, + &s5pv210_device_pdma1, +}; + +static int __init s5pv210_dma_init(void) +{ + platform_add_devices(s5pv210_dmacs, ARRAY_SIZE(s5pv210_dmacs)); + + return 0; +} +arch_initcall(s5pv210_dma_init); diff --git a/arch/arm/mach-s5pv210/gpiolib.c b/arch/arm/mach-s5pv210/gpiolib.c new file mode 100644 index 0000000..9ea8972 --- /dev/null +++ b/arch/arm/mach-s5pv210/gpiolib.c @@ -0,0 +1,261 @@ +/* linux/arch/arm/mach-s5pv210/gpiolib.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5PV210 - GPIOlib support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <plat/gpio-core.h> +#include <plat/gpio-cfg.h> +#include <plat/gpio-cfg-helpers.h> +#include <mach/map.h> + +static struct s3c_gpio_cfg gpio_cfg = { + .set_config = s3c_gpio_setcfg_s3c64xx_4bit, + .set_pull = s3c_gpio_setpull_updown, + .get_pull = s3c_gpio_getpull_updown, +}; + +static struct s3c_gpio_cfg gpio_cfg_noint = { + .set_config = s3c_gpio_setcfg_s3c64xx_4bit, + .set_pull = s3c_gpio_setpull_updown, + .get_pull = s3c_gpio_getpull_updown, +}; + +/* GPIO bank's base address given the index of the bank in the + * list of all gpio banks. + */ +#define S5PV210_BANK_BASE(bank_nr) (S5P_VA_GPIO + ((bank_nr) * 0x20)) + +/* + * Following are the gpio banks in v210. + * + * The 'config' member when left to NULL, is initialized to the default + * structure gpio_cfg in the init function below. + * + * The 'base' member is also initialized in the init function below. + * Note: The initialization of 'base' member of s3c_gpio_chip structure + * uses the above macro and depends on the banks being listed in order here. + */ +static struct s3c_gpio_chip s5pv210_gpio_4bit[] = { + { + .chip = { + .base = S5PV210_GPA0(0), + .ngpio = S5PV210_GPIO_A0_NR, + .label = "GPA0", + }, + }, { + .chip = { + .base = S5PV210_GPA1(0), + .ngpio = S5PV210_GPIO_A1_NR, + .label = "GPA1", + }, + }, { + .chip = { + .base = S5PV210_GPB(0), + .ngpio = S5PV210_GPIO_B_NR, + .label = "GPB", + }, + }, { + .chip = { + .base = S5PV210_GPC0(0), + .ngpio = S5PV210_GPIO_C0_NR, + .label = "GPC0", + }, + }, { + .chip = { + .base = S5PV210_GPC1(0), + .ngpio = S5PV210_GPIO_C1_NR, + .label = "GPC1", + }, + }, { + .chip = { + .base = S5PV210_GPD0(0), + .ngpio = S5PV210_GPIO_D0_NR, + .label = "GPD0", + }, + }, { + .chip = { + .base = S5PV210_GPD1(0), + .ngpio = S5PV210_GPIO_D1_NR, + .label = "GPD1", + }, + }, { + .chip = { + .base = S5PV210_GPE0(0), + .ngpio = S5PV210_GPIO_E0_NR, + .label = "GPE0", + }, + }, { + .chip = { + .base = S5PV210_GPE1(0), + .ngpio = S5PV210_GPIO_E1_NR, + .label = "GPE1", + }, + }, { + .chip = { + .base = S5PV210_GPF0(0), + .ngpio = S5PV210_GPIO_F0_NR, + .label = "GPF0", + }, + }, { + .chip = { + .base = S5PV210_GPF1(0), + .ngpio = S5PV210_GPIO_F1_NR, + .label = "GPF1", + }, + }, { + .chip = { + .base = S5PV210_GPF2(0), + .ngpio = S5PV210_GPIO_F2_NR, + .label = "GPF2", + }, + }, { + .chip = { + .base = S5PV210_GPF3(0), + .ngpio = S5PV210_GPIO_F3_NR, + .label = "GPF3", + }, + }, { + .chip = { + .base = S5PV210_GPG0(0), + .ngpio = S5PV210_GPIO_G0_NR, + .label = "GPG0", + }, + }, { + .chip = { + .base = S5PV210_GPG1(0), + .ngpio = S5PV210_GPIO_G1_NR, + .label = "GPG1", + }, + }, { + .chip = { + .base = S5PV210_GPG2(0), + .ngpio = S5PV210_GPIO_G2_NR, + .label = "GPG2", + }, + }, { + .chip = { + .base = S5PV210_GPG3(0), + .ngpio = S5PV210_GPIO_G3_NR, + .label = "GPG3", + }, + }, { + .chip = { + .base = S5PV210_GPI(0), + .ngpio = S5PV210_GPIO_I_NR, + .label = "GPI", + }, + }, { + .chip = { + .base = S5PV210_GPJ0(0), + .ngpio = S5PV210_GPIO_J0_NR, + .label = "GPJ0", + }, + }, { + .chip = { + .base = S5PV210_GPJ1(0), + .ngpio = S5PV210_GPIO_J1_NR, + .label = "GPJ1", + }, + }, { + .chip = { + .base = S5PV210_GPJ2(0), + .ngpio = S5PV210_GPIO_J2_NR, + .label = "GPJ2", + }, + }, { + .chip = { + .base = S5PV210_GPJ3(0), + .ngpio = S5PV210_GPIO_J3_NR, + .label = "GPJ3", + }, + }, { + .chip = { + .base = S5PV210_GPJ4(0), + .ngpio = S5PV210_GPIO_J4_NR, + .label = "GPJ4", + }, + }, { + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_MP01(0), + .ngpio = S5PV210_GPIO_MP01_NR, + .label = "MP01", + }, + }, { + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_MP02(0), + .ngpio = S5PV210_GPIO_MP02_NR, + .label = "MP02", + }, + }, { + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_MP03(0), + .ngpio = S5PV210_GPIO_MP03_NR, + .label = "MP03", + }, + }, { + .base = (S5P_VA_GPIO + 0xC00), + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_GPH0(0), + .ngpio = S5PV210_GPIO_H0_NR, + .label = "GPH0", + }, + }, { + .base = (S5P_VA_GPIO + 0xC20), + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_GPH1(0), + .ngpio = S5PV210_GPIO_H1_NR, + .label = "GPH1", + }, + }, { + .base = (S5P_VA_GPIO + 0xC40), + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_GPH2(0), + .ngpio = S5PV210_GPIO_H2_NR, + .label = "GPH2", + }, + }, { + .base = (S5P_VA_GPIO + 0xC60), + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_GPH3(0), + .ngpio = S5PV210_GPIO_H3_NR, + .label = "GPH3", + }, + }, +}; + +static __init int s5pv210_gpiolib_init(void) +{ + struct s3c_gpio_chip *chip = s5pv210_gpio_4bit; + int nr_chips = ARRAY_SIZE(s5pv210_gpio_4bit); + int i = 0; + + for (i = 0; i < nr_chips; i++, chip++) { + if (chip->config == NULL) + chip->config = &gpio_cfg; + if (chip->base == NULL) + chip->base = S5PV210_BANK_BASE(i); + } + + samsung_gpiolib_add_4bit_chips(s5pv210_gpio_4bit, nr_chips); + + return 0; +} +core_initcall(s5pv210_gpiolib_init); diff --git a/arch/arm/mach-s5pv210/include/mach/dma.h b/arch/arm/mach-s5pv210/include/mach/dma.h new file mode 100644 index 0000000..81209eb --- /dev/null +++ b/arch/arm/mach-s5pv210/include/mach/dma.h @@ -0,0 +1,26 @@ +/* + * Copyright (C) 2010 Samsung Electronics Co. Ltd. + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __MACH_DMA_H +#define __MACH_DMA_H + +/* This platform uses the common S3C DMA API driver for PL330 */ +#include <plat/s3c-dma-pl330.h> + +#endif /* __MACH_DMA_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/gpio.h b/arch/arm/mach-s5pv210/include/mach/gpio.h index 533b020..d6461ba 100644 --- a/arch/arm/mach-s5pv210/include/mach/gpio.h +++ b/arch/arm/mach-s5pv210/include/mach/gpio.h @@ -18,6 +18,8 @@ #define gpio_cansleep __gpio_cansleep #define gpio_to_irq __gpio_to_irq +/* Practically, GPIO banks upto MP03 are the configurable gpio banks */ + /* GPIO bank sizes */ #define S5PV210_GPIO_A0_NR (8) #define S5PV210_GPIO_A1_NR (4) @@ -47,6 +49,10 @@ #define S5PV210_GPIO_J3_NR (8) #define S5PV210_GPIO_J4_NR (5) +#define S5PV210_GPIO_MP01_NR (8) +#define S5PV210_GPIO_MP02_NR (4) +#define S5PV210_GPIO_MP03_NR (8) + /* GPIO bank numbers */ /* CONFIG_S3C_GPIO_SPACE allows the user to select extra @@ -85,6 +91,9 @@ enum s5p_gpio_number { S5PV210_GPIO_J2_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_J1), S5PV210_GPIO_J3_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_J2), S5PV210_GPIO_J4_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_J3), + S5PV210_GPIO_MP01_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_J4), + S5PV210_GPIO_MP02_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_MP01), + S5PV210_GPIO_MP03_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_MP02), }; /* S5PV210 GPIO number definitions */ @@ -115,13 +124,16 @@ enum s5p_gpio_number { #define S5PV210_GPJ2(_nr) (S5PV210_GPIO_J2_START + (_nr)) #define S5PV210_GPJ3(_nr) (S5PV210_GPIO_J3_START + (_nr)) #define S5PV210_GPJ4(_nr) (S5PV210_GPIO_J4_START + (_nr)) +#define S5PV210_MP01(_nr) (S5PV210_GPIO_MP01_START + (_nr)) +#define S5PV210_MP02(_nr) (S5PV210_GPIO_MP02_START + (_nr)) +#define S5PV210_MP03(_nr) (S5PV210_GPIO_MP03_START + (_nr)) /* the end of the S5PV210 specific gpios */ -#define S5PV210_GPIO_END (S5PV210_GPJ4(S5PV210_GPIO_J4_NR) + 1) +#define S5PV210_GPIO_END (S5PV210_MP03(S5PV210_GPIO_MP03_NR) + 1) #define S3C_GPIO_END S5PV210_GPIO_END -/* define the number of gpios we need to the one after the GPJ4() range */ -#define ARCH_NR_GPIOS (S5PV210_GPJ4(S5PV210_GPIO_J4_NR) + \ +/* define the number of gpios we need to the one after the MP03() range */ +#define ARCH_NR_GPIOS (S5PV210_MP03(S5PV210_GPIO_MP03_NR) + \ CONFIG_SAMSUNG_GPIO_EXTRA + 1) #include <asm-generic/gpio.h> diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h index 62c5175..92fc6c7 100644 --- a/arch/arm/mach-s5pv210/include/mach/irqs.h +++ b/arch/arm/mach-s5pv210/include/mach/irqs.h @@ -17,22 +17,6 @@ /* VIC0: System, DMA, Timer */ -#define IRQ_EINT0 S5P_IRQ_VIC0(0) -#define IRQ_EINT1 S5P_IRQ_VIC0(1) -#define IRQ_EINT2 S5P_IRQ_VIC0(2) -#define IRQ_EINT3 S5P_IRQ_VIC0(3) -#define IRQ_EINT4 S5P_IRQ_VIC0(4) -#define IRQ_EINT5 S5P_IRQ_VIC0(5) -#define IRQ_EINT6 S5P_IRQ_VIC0(6) -#define IRQ_EINT7 S5P_IRQ_VIC0(7) -#define IRQ_EINT8 S5P_IRQ_VIC0(8) -#define IRQ_EINT9 S5P_IRQ_VIC0(9) -#define IRQ_EINT10 S5P_IRQ_VIC0(10) -#define IRQ_EINT11 S5P_IRQ_VIC0(11) -#define IRQ_EINT12 S5P_IRQ_VIC0(12) -#define IRQ_EINT13 S5P_IRQ_VIC0(13) -#define IRQ_EINT14 S5P_IRQ_VIC0(14) -#define IRQ_EINT15 S5P_IRQ_VIC0(15) #define IRQ_EINT16_31 S5P_IRQ_VIC0(16) #define IRQ_BATF S5P_IRQ_VIC0(17) #define IRQ_MDMA S5P_IRQ_VIC0(18) @@ -134,13 +118,25 @@ #define IRQ_MDNIE3 S5P_IRQ_VIC3(8) #define IRQ_VIC_END S5P_IRQ_VIC3(31) -#define S5P_IRQ_EINT_BASE (IRQ_VIC_END + 1) +#define S5P_EINT_16_31_BASE (IRQ_VIC_END + 1) -#define S5P_EINT(x) ((x) + S5P_IRQ_EINT_BASE) -#define IRQ_EINT(x) S5P_EINT(x) +#define EINT_MODE S3C_GPIO_SFN(0xf) + +#define IRQ_EINT(x) ((x) < 16 ? ((x) + S5P_IRQ_VIC0(0)) \ + : ((x) + S5P_EINT_16_31_BASE)) /* Set the default NR_IRQS */ -#define NR_IRQS (IRQ_EINT(31) + 1) +#define NR_IRQS (IRQ_EINT(31) + 1) + +#define EINT_GPIO_0(x) S5PV210_GPH0(x) +#define EINT_GPIO_1(x) S5PV210_GPH1(x) +#define EINT_GPIO_2(x) S5PV210_GPH2(x) +#define EINT_GPIO_3(x) S5PV210_GPH3(x) + +/* Compatibility */ +#define IRQ_LCD_FIFO IRQ_LCD0 +#define IRQ_LCD_VSYNC IRQ_LCD1 +#define IRQ_LCD_SYSTEM IRQ_LCD2 #endif /* ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h index c22694c..34eb168 100644 --- a/arch/arm/mach-s5pv210/include/mach/map.h +++ b/arch/arm/mach-s5pv210/include/mach/map.h @@ -16,6 +16,9 @@ #include <plat/map-base.h> #include <plat/map-s5p.h> +#define S5PC110_PA_ONENAND (0xB0000000) +#define S5PC110_PA_ONENAND_DMA (0xB0600000) + #define S5PV210_PA_CHIPID (0xE0000000) #define S5P_PA_CHIPID S5PV210_PA_CHIPID @@ -25,13 +28,21 @@ #define S5PV210_PA_GPIO (0xE0200000) #define S5P_PA_GPIO S5PV210_PA_GPIO +/* SPI */ +#define S5PV210_PA_SPI0 0xE1300000 +#define S5PV210_PA_SPI1 0xE1400000 + #define S5PV210_PA_IIC0 (0xE1800000) +#define S5PV210_PA_IIC1 (0xFAB00000) +#define S5PV210_PA_IIC2 (0xE1A00000) #define S5PV210_PA_TIMER (0xE2500000) #define S5P_PA_TIMER S5PV210_PA_TIMER #define S5PV210_PA_SYSTIMER (0xE2600000) +#define S5PV210_PA_WATCHDOG (0xE2700000) + #define S5PV210_PA_UART (0xE2900000) #define S5P_PA_UART0 (S5PV210_PA_UART + 0x0) @@ -43,6 +54,14 @@ #define S5PV210_PA_SROMC (0xE8000000) +#define S5PV210_PA_MDMA 0xFA200000 +#define S5PV210_PA_PDMA0 0xE0900000 +#define S5PV210_PA_PDMA1 0xE0A00000 + +#define S5PV210_PA_FB (0xF8000000) + +#define S5PV210_PA_HSMMC(x) (0xEB000000 + ((x) * 0x100000)) + #define S5PV210_PA_VIC0 (0xF2000000) #define S5P_PA_VIC0 S5PV210_PA_VIC0 @@ -58,8 +77,32 @@ #define S5PV210_PA_SDRAM (0x20000000) #define S5P_PA_SDRAM S5PV210_PA_SDRAM +/* I2S */ +#define S5PV210_PA_IIS0 0xEEE30000 +#define S5PV210_PA_IIS1 0xE2100000 +#define S5PV210_PA_IIS2 0xE2A00000 + +/* PCM */ +#define S5PV210_PA_PCM0 0xE2300000 +#define S5PV210_PA_PCM1 0xE1200000 +#define S5PV210_PA_PCM2 0xE2B00000 + +/* AC97 */ +#define S5PV210_PA_AC97 0xE2200000 + +#define S5PV210_PA_ADC (0xE1700000) + /* compatibiltiy defines. */ #define S3C_PA_UART S5PV210_PA_UART +#define S3C_PA_HSMMC0 S5PV210_PA_HSMMC(0) +#define S3C_PA_HSMMC1 S5PV210_PA_HSMMC(1) +#define S3C_PA_HSMMC2 S5PV210_PA_HSMMC(2) #define S3C_PA_IIC S5PV210_PA_IIC0 +#define S3C_PA_IIC1 S5PV210_PA_IIC1 +#define S3C_PA_IIC2 S5PV210_PA_IIC2 +#define S3C_PA_FB S5PV210_PA_FB +#define S3C_PA_WDT S5PV210_PA_WATCHDOG + +#define SAMSUNG_PA_ADC S5PV210_PA_ADC #endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/pwm-clock.h b/arch/arm/mach-s5pv210/include/mach/pwm-clock.h index 69027fe..f8a9f1b 100644 --- a/arch/arm/mach-s5pv210/include/mach/pwm-clock.h +++ b/arch/arm/mach-s5pv210/include/mach/pwm-clock.h @@ -1,13 +1,14 @@ /* linux/arch/arm/mach-s5pv210/include/mach/pwm-clock.h * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * http://armlinux.simtec.co.uk/ * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Based on arch/arm/plat-s3c24xx/include/mach/pwm-clock.h + * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h * * S5PV210 - pwm clock and timer support * @@ -21,14 +22,14 @@ /** * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk - * @cfg: The timer TCFG1 register bits shifted down to 0. + * @tcfg: The timer TCFG1 register bits shifted down to 0. * * Return true if the given configuration from TCFG1 is a TCLK instead * any of the TDIV clocks. */ static inline int pwm_cfg_src_is_tclk(unsigned long tcfg) { - return tcfg == S3C2410_TCFG1_MUX_TCLK; + return tcfg == S3C64XX_TCFG1_MUX_TCLK; } /** @@ -40,7 +41,7 @@ static inline int pwm_cfg_src_is_tclk(unsigned long tcfg) */ static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) { - return 1 << (1 + tcfg1); + return 1 << tcfg1; } /** @@ -50,7 +51,7 @@ static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) */ static inline unsigned int pwm_tdiv_has_div1(void) { - return 0; + return 1; } /** @@ -61,9 +62,9 @@ static inline unsigned int pwm_tdiv_has_div1(void) */ static inline unsigned long pwm_tdiv_div_bits(unsigned int div) { - return ilog2(div) - 1; + return ilog2(div); } -#define S3C_TCFG1_MUX_TCLK S3C2410_TCFG1_MUX_TCLK +#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK #endif /* __ASM_ARCH_PWMCLK_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/regs-clock.h b/arch/arm/mach-s5pv210/include/mach/regs-clock.h index e56e0e4..2a25ab4 100644 --- a/arch/arm/mach-s5pv210/include/mach/regs-clock.h +++ b/arch/arm/mach-s5pv210/include/mach/regs-clock.h @@ -126,6 +126,7 @@ #define S5P_RST_STAT S5P_CLKREG(0xA000) #define S5P_OSC_CON S5P_CLKREG(0x8000) +#define S5P_MDNIE_SEL S5P_CLKREG(0x7008) #define S5P_MIPI_PHY_CON0 S5P_CLKREG(0x7200) #define S5P_MIPI_PHY_CON1 S5P_CLKREG(0x7204) #define S5P_MIPI_CONTROL S5P_CLKREG(0xE814) diff --git a/arch/arm/mach-s5pv210/include/mach/regs-fb.h b/arch/arm/mach-s5pv210/include/mach/regs-fb.h new file mode 100644 index 0000000..60d9929 --- /dev/null +++ b/arch/arm/mach-s5pv210/include/mach/regs-fb.h @@ -0,0 +1,21 @@ +/* + * Copyright 2010 Ben Dooks <ben-linux@fluff.org> + * + * Dummy framebuffer to allow build for the moment. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_MACH_REGS_FB_H +#define __ASM_ARCH_MACH_REGS_FB_H __FILE__ + +#include <plat/regs-fb-v4.h> + +static inline unsigned int s3c_fb_pal_reg(unsigned int window, int reg) +{ + return 0x2400 + (window * 256 *4 ) + reg; +} + +#endif /* __ASM_ARCH_MACH_REGS_FB_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/regs-gpio.h b/arch/arm/mach-s5pv210/include/mach/regs-gpio.h new file mode 100644 index 0000000..6d06809 --- /dev/null +++ b/arch/arm/mach-s5pv210/include/mach/regs-gpio.h @@ -0,0 +1,44 @@ +/* linux/arch/arm/mach-s5pv210/include/mach/regs-gpio.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5PV210 - GPIO (including EINT) register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_REGS_GPIO_H +#define __ASM_ARCH_REGS_GPIO_H __FILE__ + +#include <mach/map.h> + +#define S5PV210_EINT30CON (S5P_VA_GPIO + 0xE00) +#define S5P_EINT_CON(x) (S5PV210_EINT30CON + ((x) * 0x4)) + +#define S5PV210_EINT30FLTCON0 (S5P_VA_GPIO + 0xE80) +#define S5P_EINT_FLTCON(x) (S5PV210_EINT30FLTCON0 + ((x) * 0x4)) + +#define S5PV210_EINT30MASK (S5P_VA_GPIO + 0xF00) +#define S5P_EINT_MASK(x) (S5PV210_EINT30MASK + ((x) * 0x4)) + +#define S5PV210_EINT30PEND (S5P_VA_GPIO + 0xF40) +#define S5P_EINT_PEND(x) (S5PV210_EINT30PEND + ((x) * 0x4)) + +#define eint_offset(irq) ((irq) < IRQ_EINT16_31 ? ((irq) - IRQ_EINT(0)) \ + : ((irq) - S5P_EINT_16_31_BASE)) + +#define EINT_REG_NR(x) (eint_offset(x) >> 3) + +#define eint_irq_to_bit(irq) (1 << (eint_offset(irq) & 0x7)) + +/* values for S5P_EXTINT0 */ +#define S5P_EXTINT_LOWLEV (0x00) +#define S5P_EXTINT_HILEV (0x01) +#define S5P_EXTINT_FALLEDGE (0x02) +#define S5P_EXTINT_RISEEDGE (0x03) +#define S5P_EXTINT_BOTHEDGE (0x04) + +#endif /* __ASM_ARCH_REGS_GPIO_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/spi-clocks.h b/arch/arm/mach-s5pv210/include/mach/spi-clocks.h new file mode 100644 index 0000000..02acded --- /dev/null +++ b/arch/arm/mach-s5pv210/include/mach/spi-clocks.h @@ -0,0 +1,17 @@ +/* linux/arch/arm/mach-s5pv210/include/mach/spi-clocks.h + * + * Copyright (C) 2010 Samsung Electronics Co. Ltd. + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __S5PV210_PLAT_SPI_CLKS_H +#define __S5PV210_PLAT_SPI_CLKS_H __FILE__ + +#define S5PV210_SPI_SRCCLK_PCLK 0 +#define S5PV210_SPI_SRCCLK_SCLK 1 + +#endif /* __S5PV210_PLAT_SPI_CLKS_H */ diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c new file mode 100644 index 0000000..10bc76e --- /dev/null +++ b/arch/arm/mach-s5pv210/mach-aquila.c @@ -0,0 +1,149 @@ +/* linux/arch/arm/mach-s5pv210/mach-aquila.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/serial_core.h> +#include <linux/fb.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/setup.h> +#include <asm/mach-types.h> + +#include <mach/map.h> +#include <mach/regs-clock.h> +#include <mach/regs-fb.h> + +#include <plat/regs-serial.h> +#include <plat/s5pv210.h> +#include <plat/devs.h> +#include <plat/cpu.h> +#include <plat/fb.h> + +/* Following are default values for UCON, ULCON and UFCON UART registers */ +#define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI | \ + S3C2443_UCON_RXERR_IRQEN) + +#define S5PV210_ULCON_DEFAULT S3C2410_LCON_CS8 + +#define S5PV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S5PV210_UFCON_TXTRIG4 | \ + S5PV210_UFCON_RXTRIG4) + +static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = S5PV210_UCON_DEFAULT, + .ulcon = S5PV210_ULCON_DEFAULT, + .ufcon = S5PV210_UFCON_DEFAULT, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = S5PV210_UCON_DEFAULT, + .ulcon = S5PV210_ULCON_DEFAULT, + .ufcon = S5PV210_UFCON_DEFAULT, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = S5PV210_UCON_DEFAULT, + .ulcon = S5PV210_ULCON_DEFAULT, + .ufcon = S5PV210_UFCON_DEFAULT, + }, + [3] = { + .hwport = 3, + .flags = 0, + .ucon = S5PV210_UCON_DEFAULT, + .ulcon = S5PV210_ULCON_DEFAULT, + .ufcon = S5PV210_UFCON_DEFAULT, + }, +}; + +/* Frame Buffer */ +static struct s3c_fb_pd_win aquila_fb_win0 = { + .win_mode = { + .pixclock = 1000000000000ULL / ((16+16+2+480)*(28+3+2+800)*60), + .left_margin = 16, + .right_margin = 16, + .upper_margin = 3, + .lower_margin = 28, + .hsync_len = 2, + .vsync_len = 2, + .xres = 480, + .yres = 800, + }, + .max_bpp = 32, + .default_bpp = 16, +}; + +static struct s3c_fb_pd_win aquila_fb_win1 = { + .win_mode = { + .pixclock = 1000000000000ULL / ((16+16+2+480)*(28+3+2+800)*60), + .left_margin = 16, + .right_margin = 16, + .upper_margin = 3, + .lower_margin = 28, + .hsync_len = 2, + .vsync_len = 2, + .xres = 480, + .yres = 800, + }, + .max_bpp = 32, + .default_bpp = 16, +}; + +static struct s3c_fb_platdata aquila_lcd_pdata __initdata = { + .win[0] = &aquila_fb_win0, + .win[1] = &aquila_fb_win1, + .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, + .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC | + VIDCON1_INV_VCLK | VIDCON1_INV_VDEN, + .setup_gpio = s5pv210_fb_gpio_setup_24bpp, +}; + +static struct platform_device *aquila_devices[] __initdata = { + &s3c_device_fb, +}; + +static void __init aquila_map_io(void) +{ + s5p_init_io(NULL, 0, S5P_VA_CHIPID); + s3c24xx_init_clocks(24000000); + s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs)); +} + +static void __init aquila_machine_init(void) +{ + /* FB */ + s3c_fb_set_platdata(&aquila_lcd_pdata); + + platform_add_devices(aquila_devices, ARRAY_SIZE(aquila_devices)); +} + +MACHINE_START(AQUILA, "Aquila") + /* Maintainers: + Marek Szyprowski <m.szyprowski@samsung.com> + Kyungmin Park <kyungmin.park@samsung.com> */ + .phys_io = S3C_PA_UART & 0xfff00000, + .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, + .boot_params = S5P_PA_SDRAM + 0x100, + .init_irq = s5pv210_init_irq, + .map_io = aquila_map_io, + .init_machine = aquila_machine_init, + .timer = &s3c24xx_timer, +MACHINE_END diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c new file mode 100644 index 0000000..4863b13 --- /dev/null +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -0,0 +1,98 @@ +/* linux/arch/arm/mach-s5pv210/mach-goni.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/serial_core.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/setup.h> +#include <asm/mach-types.h> + +#include <mach/map.h> +#include <mach/regs-clock.h> + +#include <plat/regs-serial.h> +#include <plat/s5pv210.h> +#include <plat/devs.h> +#include <plat/cpu.h> + +/* Following are default values for UCON, ULCON and UFCON UART registers */ +#define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI | \ + S3C2443_UCON_RXERR_IRQEN) + +#define S5PV210_ULCON_DEFAULT S3C2410_LCON_CS8 + +#define S5PV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S5PV210_UFCON_TXTRIG4 | \ + S5PV210_UFCON_RXTRIG4) + +static struct s3c2410_uartcfg goni_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = S5PV210_UCON_DEFAULT, + .ulcon = S5PV210_ULCON_DEFAULT, + .ufcon = S5PV210_UFCON_DEFAULT, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = S5PV210_UCON_DEFAULT, + .ulcon = S5PV210_ULCON_DEFAULT, + .ufcon = S5PV210_UFCON_DEFAULT, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = S5PV210_UCON_DEFAULT, + .ulcon = S5PV210_ULCON_DEFAULT, + .ufcon = S5PV210_UFCON_DEFAULT, + }, + [3] = { + .hwport = 3, + .flags = 0, + .ucon = S5PV210_UCON_DEFAULT, + .ulcon = S5PV210_ULCON_DEFAULT, + .ufcon = S5PV210_UFCON_DEFAULT, + }, +}; + +static struct platform_device *goni_devices[] __initdata = { +}; + +static void __init goni_map_io(void) +{ + s5p_init_io(NULL, 0, S5P_VA_CHIPID); + s3c24xx_init_clocks(24000000); + s3c24xx_init_uarts(goni_uartcfgs, ARRAY_SIZE(goni_uartcfgs)); +} + +static void __init goni_machine_init(void) +{ + platform_add_devices(goni_devices, ARRAY_SIZE(goni_devices)); +} + +MACHINE_START(GONI, "GONI") + /* Maintainers: Kyungmin Park <kyungmin.park@samsung.com> */ + .phys_io = S3C_PA_UART & 0xfff00000, + .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, + .boot_params = S5P_PA_SDRAM + 0x100, + .init_irq = s5pv210_init_irq, + .map_io = goni_map_io, + .init_machine = goni_machine_init, + .timer = &s3c24xx_timer, +MACHINE_END diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c index ab4869d..4c8903c 100644 --- a/arch/arm/mach-s5pv210/mach-smdkc110.c +++ b/arch/arm/mach-s5pv210/mach-smdkc110.c @@ -72,6 +72,9 @@ static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = { }; static struct platform_device *smdkc110_devices[] __initdata = { + &s5pv210_device_iis0, + &s5pv210_device_ac97, + &s3c_device_wdt, }; static void __init smdkc110_map_io(void) diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index a278832..0d46279 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -25,6 +25,8 @@ #include <plat/s5pv210.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/adc.h> +#include <plat/ts.h> /* Following are default values for UCON, ULCON and UFCON UART registers */ #define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ @@ -72,6 +74,17 @@ static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = { }; static struct platform_device *smdkv210_devices[] __initdata = { + &s5pv210_device_iis0, + &s5pv210_device_ac97, + &s3c_device_adc, + &s3c_device_ts, + &s3c_device_wdt, +}; + +static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { + .delay = 10000, + .presc = 49, + .oversampling_shift = 2, }; static void __init smdkv210_map_io(void) @@ -83,6 +96,7 @@ static void __init smdkv210_map_io(void) static void __init smdkv210_machine_init(void) { + s3c24xx_ts_set_platdata(&s3c_ts_platform); platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices)); } diff --git a/arch/arm/mach-s5pv210/setup-fb-24bpp.c b/arch/arm/mach-s5pv210/setup-fb-24bpp.c new file mode 100644 index 0000000..a50cbac --- /dev/null +++ b/arch/arm/mach-s5pv210/setup-fb-24bpp.c @@ -0,0 +1,62 @@ +/* linux/arch/arm/plat-s5pv210/setup-fb-24bpp.c + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Base s5pv210 setup information for 24bpp LCD framebuffer + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/fb.h> + +#include <mach/regs-fb.h> +#include <mach/gpio.h> +#include <mach/map.h> +#include <plat/fb.h> +#include <mach/regs-clock.h> +#include <plat/gpio-cfg.h> + +void s5pv210_fb_gpio_setup_24bpp(void) +{ + unsigned int gpio = 0; + + for (gpio = S5PV210_GPF0(0); gpio <= S5PV210_GPF0(7); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); + } + + for (gpio = S5PV210_GPF1(0); gpio <= S5PV210_GPF1(7); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); + } + + for (gpio = S5PV210_GPF2(0); gpio <= S5PV210_GPF2(7); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); + } + + for (gpio = S5PV210_GPF3(0); gpio <= S5PV210_GPF3(3); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); + } + + /* Set DISPLAY_CONTROL register for Display path selection. + * + * ouput | RGB | I80 | ITU + * ----------------------------------- + * 00 | MIE | FIMD | FIMD + * 01 | MDNIE | MDNIE | FIMD + * 10 | FIMD | FIMD | FIMD + * 11 | FIMD | FIMD | FIMD + */ + writel(0x2, S5P_MDNIE_SEL); +} diff --git a/arch/arm/mach-s5pv210/setup-i2c0.c b/arch/arm/mach-s5pv210/setup-i2c0.c new file mode 100644 index 0000000..c718253 --- /dev/null +++ b/arch/arm/mach-s5pv210/setup-i2c0.c @@ -0,0 +1,30 @@ +/* linux/arch/arm/mach-s5pv210/setup-i2c0.c + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * I2C0 GPIO configuration. + * + * Based on plat-s3c64xx/setup-i2c0.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> + +struct platform_device; /* don't need the contents */ + +#include <mach/gpio.h> +#include <plat/iic.h> +#include <plat/gpio-cfg.h> + +void s3c_i2c0_cfg_gpio(struct platform_device *dev) +{ + s3c_gpio_cfgpin(S5PV210_GPD1(0), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5PV210_GPD1(0), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5PV210_GPD1(1), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5PV210_GPD1(1), S3C_GPIO_PULL_UP); +} diff --git a/arch/arm/mach-s5pv210/setup-i2c1.c b/arch/arm/mach-s5pv210/setup-i2c1.c new file mode 100644 index 0000000..45e0e6e --- /dev/null +++ b/arch/arm/mach-s5pv210/setup-i2c1.c @@ -0,0 +1,30 @@ +/* linux/arch/arm/mach-s5pv210/setup-i2c1.c + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * I2C1 GPIO configuration. + * + * Based on plat-s3c64xx/setup-i2c1.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> + +struct platform_device; /* don't need the contents */ + +#include <mach/gpio.h> +#include <plat/iic.h> +#include <plat/gpio-cfg.h> + +void s3c_i2c1_cfg_gpio(struct platform_device *dev) +{ + s3c_gpio_cfgpin(S5PV210_GPD1(2), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5PV210_GPD1(2), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5PV210_GPD1(3), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5PV210_GPD1(3), S3C_GPIO_PULL_UP); +} diff --git a/arch/arm/mach-s5pv210/setup-i2c2.c b/arch/arm/mach-s5pv210/setup-i2c2.c new file mode 100644 index 0000000..b11b4bf --- /dev/null +++ b/arch/arm/mach-s5pv210/setup-i2c2.c @@ -0,0 +1,30 @@ +/* linux/arch/arm/mach-s5pv210/setup-i2c2.c + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * I2C2 GPIO configuration. + * + * Based on plat-s3c64xx/setup-i2c0.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> + +struct platform_device; /* don't need the contents */ + +#include <mach/gpio.h> +#include <plat/iic.h> +#include <plat/gpio-cfg.h> + +void s3c_i2c2_cfg_gpio(struct platform_device *dev) +{ + s3c_gpio_cfgpin(S5PV210_GPD1(4), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5PV210_GPD1(4), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5PV210_GPD1(5), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5PV210_GPD1(5), S3C_GPIO_PULL_UP); +} diff --git a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c new file mode 100644 index 0000000..fe7d86d --- /dev/null +++ b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c @@ -0,0 +1,104 @@ +/* linux/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5PV210 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/mmc/host.h> +#include <linux/mmc/card.h> + +#include <mach/gpio.h> +#include <plat/gpio-cfg.h> +#include <plat/regs-sdhci.h> + +void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) +{ + unsigned int gpio; + + /* Set all the necessary GPG0/GPG1 pins to special-function 2 */ + for (gpio = S5PV210_GPG0(0); gpio < S5PV210_GPG0(2); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + switch (width) { + case 8: + /* GPG1[3:6] special-funtion 3 */ + for (gpio = S5PV210_GPG1(3); gpio <= S5PV210_GPG1(6); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + case 4: + /* GPG0[3:6] special-funtion 2 */ + for (gpio = S5PV210_GPG0(3); gpio <= S5PV210_GPG0(6); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + default: + break; + } + + s3c_gpio_setpull(S5PV210_GPG0(2), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5PV210_GPG0(2), S3C_GPIO_SFN(2)); +} + +void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width) +{ + unsigned int gpio; + + /* Set all the necessary GPG1[0:1] pins to special-function 2 */ + for (gpio = S5PV210_GPG1(0); gpio < S5PV210_GPG1(2); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + + /* Data pin GPG1[3:6] to special-function 2 */ + for (gpio = S5PV210_GPG1(3); gpio <= S5PV210_GPG1(6); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + + s3c_gpio_setpull(S5PV210_GPG1(2), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5PV210_GPG1(2), S3C_GPIO_SFN(2)); +} + +void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width) +{ + unsigned int gpio; + + /* Set all the necessary GPG2[0:1] pins to special-function 2 */ + for (gpio = S5PV210_GPG2(0); gpio < S5PV210_GPG2(2); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + + switch (width) { + case 8: + /* Data pin GPG3[3:6] to special-function 3 */ + for (gpio = S5PV210_GPG3(3); gpio <= S5PV210_GPG3(6); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + case 4: + /* Data pin GPG2[3:6] to special-function 2 */ + for (gpio = S5PV210_GPG2(3); gpio <= S5PV210_GPG2(6); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + default: + break; + } + + s3c_gpio_setpull(S5PV210_GPG2(2), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5PV210_GPG2(2), S3C_GPIO_SFN(2)); +} diff --git a/arch/arm/mach-s5pv210/setup-sdhci.c b/arch/arm/mach-s5pv210/setup-sdhci.c new file mode 100644 index 0000000..51815ec --- /dev/null +++ b/arch/arm/mach-s5pv210/setup-sdhci.c @@ -0,0 +1,63 @@ +/* linux/arch/arm/mach-s5pv210/setup-sdhci.c + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5PV210 - Helper functions for settign up SDHCI device(s) (HSMMC) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/io.h> + +#include <linux/mmc/card.h> +#include <linux/mmc/host.h> + +#include <plat/regs-sdhci.h> +#include <plat/sdhci.h> + +/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */ + +char *s5pv210_hsmmc_clksrcs[4] = { + [0] = "hsmmc", /* HCLK */ + [1] = "hsmmc", /* HCLK */ + [2] = "sclk_mmc", /* mmc_bus */ + /*[4] = reserved */ +}; + +void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev, + void __iomem *r, + struct mmc_ios *ios, + struct mmc_card *card) +{ + u32 ctrl2, ctrl3; + + /* don't need to alter anything acording to card-type */ + + writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4); + + ctrl2 = readl(r + S3C_SDHCI_CONTROL2); + ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK; + ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR | + S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK | + S3C_SDHCI_CTRL2_ENFBCLKRX | + S3C_SDHCI_CTRL2_DFCNT_NONE | + S3C_SDHCI_CTRL2_ENCLKOUTHOLD); + + if (ios->clock < 25 * 1000000) + ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 | + S3C_SDHCI_CTRL3_FCSEL2 | + S3C_SDHCI_CTRL3_FCSEL1 | + S3C_SDHCI_CTRL3_FCSEL0); + else + ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0); + + writel(ctrl2, r + S3C_SDHCI_CONTROL2); + writel(ctrl3, r + S3C_SDHCI_CONTROL3); +} |