diff options
Diffstat (limited to 'arch/arm/mach-sa1100')
-rw-r--r-- | arch/arm/mach-sa1100/include/mach/irqs.h | 8 | ||||
-rw-r--r-- | arch/arm/mach-sa1100/neponset.c | 111 |
2 files changed, 61 insertions, 58 deletions
diff --git a/arch/arm/mach-sa1100/include/mach/irqs.h b/arch/arm/mach-sa1100/include/mach/irqs.h index d18f21a..9e07634 100644 --- a/arch/arm/mach-sa1100/include/mach/irqs.h +++ b/arch/arm/mach-sa1100/include/mach/irqs.h @@ -82,11 +82,3 @@ #else #define NR_IRQS (IRQ_BOARD_START) #endif - -/* - * Board specific IRQs. Define them here. - * Do not surround them with ifdefs. - */ -#define IRQ_NEPONSET_SMC9196 (IRQ_BOARD_START + 0) -#define IRQ_NEPONSET_USAR (IRQ_BOARD_START + 1) -#define IRQ_NEPONSET_SA1111 (IRQ_BOARD_START + 2) diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c index 164bc98..4768196 100644 --- a/arch/arm/mach-sa1100/neponset.c +++ b/arch/arm/mach-sa1100/neponset.c @@ -4,6 +4,7 @@ #include <linux/err.h> #include <linux/init.h> #include <linux/ioport.h> +#include <linux/irq.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/platform_device.h> @@ -11,9 +12,7 @@ #include <linux/slab.h> #include <asm/mach-types.h> -#include <asm/irq.h> #include <asm/mach/map.h> -#include <asm/mach/irq.h> #include <asm/mach/serial_sa1100.h> #include <asm/hardware/sa1111.h> #include <asm/sizes.h> @@ -22,9 +21,15 @@ #include <mach/assabet.h> #include <mach/neponset.h> +#define NEP_IRQ_SMC91X 0 +#define NEP_IRQ_USAR 1 +#define NEP_IRQ_SA1111 2 +#define NEP_IRQ_NR 3 + struct neponset_drvdata { struct platform_device *sa1111; struct platform_device *smc91x; + unsigned irq_base; #ifdef CONFIG_PM_SLEEP u32 ncr0; u32 mdm_ctl_0; @@ -104,9 +109,9 @@ static struct sa1100_port_fns neponset_port_fns __devinitdata = { * ensure that the IRQ signal is deasserted before returning. This * is rather unfortunate. */ -static void -neponset_irq_handler(unsigned int irq, struct irq_desc *desc) +static void neponset_irq_handler(unsigned int irq, struct irq_desc *desc) { + struct neponset_drvdata *d = irq_desc_get_handler_data(desc); unsigned int irr; while (1) { @@ -141,26 +146,21 @@ neponset_irq_handler(unsigned int irq, struct irq_desc *desc) */ desc->irq_data.chip->irq_ack(&desc->irq_data); - if (irr & IRR_ETHERNET) { - generic_handle_irq(IRQ_NEPONSET_SMC9196); - } + if (irr & IRR_ETHERNET) + generic_handle_irq(d->irq_base + NEP_IRQ_SMC91X); - if (irr & IRR_USAR) { - generic_handle_irq(IRQ_NEPONSET_USAR); - } + if (irr & IRR_USAR) + generic_handle_irq(d->irq_base + NEP_IRQ_USAR); desc->irq_data.chip->irq_unmask(&desc->irq_data); } - if (irr & IRR_SA1111) { - generic_handle_irq(IRQ_NEPONSET_SA1111); - } + if (irr & IRR_SA1111) + generic_handle_irq(d->irq_base + NEP_IRQ_SA1111); } } -/* - * Yes, we really do not have any kind of masking or unmasking - */ +/* Yes, we really do not have any kind of masking or unmasking */ static void nochip_noop(struct irq_data *irq) { } @@ -172,25 +172,17 @@ static struct irq_chip nochip = { .irq_unmask = nochip_noop, }; -static struct resource sa1111_resources[] = { - [0] = DEFINE_RES_MEM(0x40000000, SZ_8K), - [1] = DEFINE_RES_IRQ(IRQ_NEPONSET_SA1111), -}; - static struct sa1111_platform_data sa1111_info = { .irq_base = IRQ_BOARD_END, }; -static struct resource smc91x_resources[] = { - [0] = DEFINE_RES_MEM_NAMED(SA1100_CS3_PHYS, 0x02000000, "smc91x-regs"), - [1] = DEFINE_RES_IRQ(IRQ_NEPONSET_SMC9196), - [2] = DEFINE_RES_MEM_NAMED(SA1100_CS3_PHYS + 0x02000000, - 0x02000000, "smc91x-attrib"), -}; - static int __devinit neponset_probe(struct platform_device *dev) { struct neponset_drvdata *d; + struct resource sa1111_resources[] = { + DEFINE_RES_MEM(0x40000000, SZ_8K), + { .flags = IORESOURCE_IRQ }, + }; struct platform_device_info sa1111_devinfo = { .parent = &dev->dev, .name = "sa1111", @@ -201,6 +193,13 @@ static int __devinit neponset_probe(struct platform_device *dev) .size_data = sizeof(sa1111_info), .dma_mask = 0xffffffffUL, }; + struct resource smc91x_resources[] = { + DEFINE_RES_MEM_NAMED(SA1100_CS3_PHYS, + 0x02000000, "smc91x-regs"), + DEFINE_RES_MEM_NAMED(SA1100_CS3_PHYS + 0x02000000, + 0x02000000, "smc91x-attrib"), + { .flags = IORESOURCE_IRQ }, + }; struct platform_device_info smc91x_devinfo = { .parent = &dev->dev, .name = "smc91x", @@ -216,47 +215,59 @@ static int __devinit neponset_probe(struct platform_device *dev) goto err_alloc; } - sa1100_register_uart_fns(&neponset_port_fns); + ret = irq_alloc_descs(-1, IRQ_BOARD_START, NEP_IRQ_NR, -1); + if (ret <= 0) { + dev_err(&dev->dev, "unable to allocate %u irqs: %d\n", + NEP_IRQ_NR, ret); + if (ret == 0) + ret = -ENOMEM; + goto err_irq_alloc; + } + + d->irq_base = ret; + + irq_set_chip_and_handler(d->irq_base + NEP_IRQ_SMC91X, &nochip, + handle_simple_irq); + set_irq_flags(d->irq_base + NEP_IRQ_SMC91X, IRQF_VALID | IRQF_PROBE); + irq_set_chip_and_handler(d->irq_base + NEP_IRQ_USAR, &nochip, + handle_simple_irq); + set_irq_flags(d->irq_base + NEP_IRQ_USAR, IRQF_VALID | IRQF_PROBE); + irq_set_chip(d->irq_base + NEP_IRQ_SA1111, &nochip); - /* - * Install handler for GPIO25. - */ irq_set_irq_type(IRQ_GPIO25, IRQ_TYPE_EDGE_RISING); + irq_set_handler_data(IRQ_GPIO25, d); irq_set_chained_handler(IRQ_GPIO25, neponset_irq_handler); /* - * We would set IRQ_GPIO25 to be a wake-up IRQ, but - * unfortunately something on the Neponset activates - * this IRQ on sleep (ethernet?) + * We would set IRQ_GPIO25 to be a wake-up IRQ, but unfortunately + * something on the Neponset activates this IRQ on sleep (eth?) */ #if 0 enable_irq_wake(IRQ_GPIO25); #endif - /* - * Setup other Neponset IRQs. SA1111 will be done by the - * generic SA1111 code. - */ - irq_set_chip_and_handler(IRQ_NEPONSET_SMC9196, &nochip, - handle_simple_irq); - set_irq_flags(IRQ_NEPONSET_SMC9196, IRQF_VALID | IRQF_PROBE); - irq_set_chip_and_handler(IRQ_NEPONSET_USAR, &nochip, - handle_simple_irq); - set_irq_flags(IRQ_NEPONSET_USAR, IRQF_VALID | IRQF_PROBE); - irq_set_chip(IRQ_NEPONSET_SA1111, &nochip); + dev_info(&dev->dev, "Neponset daughter board, providing IRQ%u-%u\n", + d->irq_base, d->irq_base + NEP_IRQ_NR - 1); - /* - * Disable GPIO 0/1 drivers so the buttons work on the module. - */ + sa1100_register_uart_fns(&neponset_port_fns); + + /* Disable GPIO 0/1 drivers so the buttons work on the Assabet */ NCR_0 = NCR_GP01_OFF; + sa1111_resources[1].start = d->irq_base + NEP_IRQ_SA1111; + sa1111_resources[1].end = d->irq_base + NEP_IRQ_SA1111; d->sa1111 = platform_device_register_full(&sa1111_devinfo); + + smc91x_resources[2].start = d->irq_base + NEP_IRQ_SMC91X; + smc91x_resources[2].end = d->irq_base + NEP_IRQ_SMC91X; d->smc91x = platform_device_register_full(&smc91x_devinfo); platform_set_drvdata(dev, d); return 0; + err_irq_alloc: + kfree(d); err_alloc: return ret; } @@ -270,7 +281,7 @@ static int __devexit neponset_remove(struct platform_device *dev) if (!IS_ERR(d->smc91x)) platform_device_unregister(d->smc91x); irq_set_chained_handler(IRQ_GPIO25, NULL); - + irq_free_descs(d->irq_base, NEP_IRQ_NR); kfree(d); return 0; |