summaryrefslogtreecommitdiff
path: root/arch/arm/mm
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mm')
-rw-r--r--arch/arm/mm/Kconfig13
-rw-r--r--arch/arm/mm/alignment.c24
-rw-r--r--arch/arm/mm/cache-l2x0.c10
-rw-r--r--arch/arm/mm/copypage-v6.c9
-rw-r--r--arch/arm/mm/dma-mapping.c7
-rw-r--r--arch/arm/mm/fault-armv.c1
-rw-r--r--arch/arm/mm/flush.c25
-rw-r--r--arch/arm/mm/highmem.c87
-rw-r--r--arch/arm/mm/init.c1
-rw-r--r--arch/arm/mm/mmu.c14
-rw-r--r--arch/arm/mm/pgd.c1
-rw-r--r--arch/arm/mm/proc-sa1100.S2
12 files changed, 157 insertions, 37 deletions
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index c4ed9f9..5bd7c89 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -736,6 +736,12 @@ config NEEDS_SYSCALL_FOR_CMPXCHG
config OUTER_CACHE
bool
+config OUTER_CACHE_SYNC
+ bool
+ help
+ The outer cache has a outer_cache_fns.sync function pointer
+ that can be used to drain the write buffer of the outer cache.
+
config CACHE_FEROCEON_L2
bool "Enable the Feroceon L2 cache controller"
depends on ARCH_KIRKWOOD || ARCH_MV78XX0
@@ -757,6 +763,7 @@ config CACHE_L2X0
REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX || ARCH_NOMADIK || ARCH_OMAP4
default y
select OUTER_CACHE
+ select OUTER_CACHE_SYNC
help
This option enables the L2x0 PrimeCell.
@@ -781,3 +788,9 @@ config ARM_L1_CACHE_SHIFT
int
default 6 if ARM_L1_CACHE_SHIFT_6
default 5
+
+config ARCH_HAS_BARRIERS
+ bool
+ help
+ This option allows the use of custom mandatory barriers
+ included via the mach/barriers.h file.
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index edddd66..a2ab51f 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -166,15 +166,15 @@ union offset_union {
THUMB( "1: "ins" %1, [%2]\n" ) \
THUMB( " add %2, %2, #1\n" ) \
"2:\n" \
- " .section .fixup,\"ax\"\n" \
+ " .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
"3: mov %0, #1\n" \
" b 2b\n" \
- " .previous\n" \
- " .section __ex_table,\"a\"\n" \
+ " .popsection\n" \
+ " .pushsection __ex_table,\"a\"\n" \
" .align 3\n" \
" .long 1b, 3b\n" \
- " .previous\n" \
+ " .popsection\n" \
: "=r" (err), "=&r" (val), "=r" (addr) \
: "0" (err), "2" (addr))
@@ -226,16 +226,16 @@ union offset_union {
" mov %1, %1, "NEXT_BYTE"\n" \
"2: "ins" %1, [%2]\n" \
"3:\n" \
- " .section .fixup,\"ax\"\n" \
+ " .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
"4: mov %0, #1\n" \
" b 3b\n" \
- " .previous\n" \
- " .section __ex_table,\"a\"\n" \
+ " .popsection\n" \
+ " .pushsection __ex_table,\"a\"\n" \
" .align 3\n" \
" .long 1b, 4b\n" \
" .long 2b, 4b\n" \
- " .previous\n" \
+ " .popsection\n" \
: "=r" (err), "=&r" (v), "=&r" (a) \
: "0" (err), "1" (v), "2" (a)); \
if (err) \
@@ -266,18 +266,18 @@ union offset_union {
" mov %1, %1, "NEXT_BYTE"\n" \
"4: "ins" %1, [%2]\n" \
"5:\n" \
- " .section .fixup,\"ax\"\n" \
+ " .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
"6: mov %0, #1\n" \
" b 5b\n" \
- " .previous\n" \
- " .section __ex_table,\"a\"\n" \
+ " .popsection\n" \
+ " .pushsection __ex_table,\"a\"\n" \
" .align 3\n" \
" .long 1b, 6b\n" \
" .long 2b, 6b\n" \
" .long 3b, 6b\n" \
" .long 4b, 6b\n" \
- " .previous\n" \
+ " .popsection\n" \
: "=r" (err), "=&r" (v), "=&r" (a) \
: "0" (err), "1" (v), "2" (a)); \
if (err) \
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index 0733463..21ad68b 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -93,6 +93,15 @@ static inline void l2x0_flush_line(unsigned long addr)
}
#endif
+static void l2x0_cache_sync(void)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&l2x0_lock, flags);
+ cache_sync();
+ spin_unlock_irqrestore(&l2x0_lock, flags);
+}
+
static inline void l2x0_inv_all(void)
{
unsigned long flags;
@@ -225,6 +234,7 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask)
outer_cache.inv_range = l2x0_inv_range;
outer_cache.clean_range = l2x0_clean_range;
outer_cache.flush_range = l2x0_flush_range;
+ outer_cache.sync = l2x0_cache_sync;
printk(KERN_INFO "L2X0 cache controller enabled\n");
}
diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c
index 8bca4de..f55fa10 100644
--- a/arch/arm/mm/copypage-v6.c
+++ b/arch/arm/mm/copypage-v6.c
@@ -41,14 +41,7 @@ static void v6_copy_user_highpage_nonaliasing(struct page *to,
kfrom = kmap_atomic(from, KM_USER0);
kto = kmap_atomic(to, KM_USER1);
copy_page(kto, kfrom);
-#ifdef CONFIG_HIGHMEM
- /*
- * kmap_atomic() doesn't set the page virtual address, and
- * kunmap_atomic() takes care of cache flushing already.
- */
- if (page_address(to) != NULL)
-#endif
- __cpuc_flush_dcache_area(kto, PAGE_SIZE);
+ __cpuc_flush_dcache_area(kto, PAGE_SIZE);
kunmap_atomic(kto, KM_USER1);
kunmap_atomic(kfrom, KM_USER0);
}
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 0da7ecc..13fa536 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -11,7 +11,7 @@
*/
#include <linux/module.h>
#include <linux/mm.h>
-#include <linux/slab.h>
+#include <linux/gfp.h>
#include <linux/errno.h>
#include <linux/list.h>
#include <linux/init.h>
@@ -464,6 +464,11 @@ static void dma_cache_maint_page(struct page *page, unsigned long offset,
vaddr += offset;
op(vaddr, len, dir);
kunmap_high(page);
+ } else if (cache_is_vipt()) {
+ pte_t saved_pte;
+ vaddr = kmap_high_l1_vipt(page, &saved_pte);
+ op(vaddr + offset, len, dir);
+ kunmap_high_l1_vipt(page, saved_pte);
}
} else {
vaddr = page_address(page) + offset;
diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c
index c9b97e9..0d414c2 100644
--- a/arch/arm/mm/fault-armv.c
+++ b/arch/arm/mm/fault-armv.c
@@ -16,6 +16,7 @@
#include <linux/vmalloc.h>
#include <linux/init.h>
#include <linux/pagemap.h>
+#include <linux/gfp.h>
#include <asm/bugs.h>
#include <asm/cacheflush.h>
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index e34f095..c6844cb 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -13,6 +13,7 @@
#include <asm/cacheflush.h>
#include <asm/cachetype.h>
+#include <asm/highmem.h>
#include <asm/smp_plat.h>
#include <asm/system.h>
#include <asm/tlbflush.h>
@@ -152,21 +153,25 @@ void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
void __flush_dcache_page(struct address_space *mapping, struct page *page)
{
- void *addr = page_address(page);
-
/*
* Writeback any data associated with the kernel mapping of this
* page. This ensures that data in the physical page is mutually
* coherent with the kernels mapping.
*/
-#ifdef CONFIG_HIGHMEM
- /*
- * kmap_atomic() doesn't set the page virtual address, and
- * kunmap_atomic() takes care of cache flushing already.
- */
- if (addr)
-#endif
- __cpuc_flush_dcache_area(addr, PAGE_SIZE);
+ if (!PageHighMem(page)) {
+ __cpuc_flush_dcache_area(page_address(page), PAGE_SIZE);
+ } else {
+ void *addr = kmap_high_get(page);
+ if (addr) {
+ __cpuc_flush_dcache_area(addr, PAGE_SIZE);
+ kunmap_high(page);
+ } else if (cache_is_vipt()) {
+ pte_t saved_pte;
+ addr = kmap_high_l1_vipt(page, &saved_pte);
+ __cpuc_flush_dcache_area(addr, PAGE_SIZE);
+ kunmap_high_l1_vipt(page, saved_pte);
+ }
+ }
/*
* If this is a page cache page, and we have an aliasing VIPT cache,
diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c
index 2be1ec7..77b030f 100644
--- a/arch/arm/mm/highmem.c
+++ b/arch/arm/mm/highmem.c
@@ -79,7 +79,8 @@ void kunmap_atomic(void *kvaddr, enum km_type type)
unsigned int idx = type + KM_TYPE_NR * smp_processor_id();
if (kvaddr >= (void *)FIXADDR_START) {
- __cpuc_flush_dcache_area((void *)vaddr, PAGE_SIZE);
+ if (cache_is_vivt())
+ __cpuc_flush_dcache_area((void *)vaddr, PAGE_SIZE);
#ifdef CONFIG_DEBUG_HIGHMEM
BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx));
set_pte_ext(TOP_PTE(vaddr), __pte(0), 0);
@@ -124,3 +125,87 @@ struct page *kmap_atomic_to_page(const void *ptr)
pte = TOP_PTE(vaddr);
return pte_page(*pte);
}
+
+#ifdef CONFIG_CPU_CACHE_VIPT
+
+#include <linux/percpu.h>
+
+/*
+ * The VIVT cache of a highmem page is always flushed before the page
+ * is unmapped. Hence unmapped highmem pages need no cache maintenance
+ * in that case.
+ *
+ * However unmapped pages may still be cached with a VIPT cache, and
+ * it is not possible to perform cache maintenance on them using physical
+ * addresses unfortunately. So we have no choice but to set up a temporary
+ * virtual mapping for that purpose.
+ *
+ * Yet this VIPT cache maintenance may be triggered from DMA support
+ * functions which are possibly called from interrupt context. As we don't
+ * want to keep interrupt disabled all the time when such maintenance is
+ * taking place, we therefore allow for some reentrancy by preserving and
+ * restoring the previous fixmap entry before the interrupted context is
+ * resumed. If the reentrancy depth is 0 then there is no need to restore
+ * the previous fixmap, and leaving the current one in place allow it to
+ * be reused the next time without a TLB flush (common with DMA).
+ */
+
+static DEFINE_PER_CPU(int, kmap_high_l1_vipt_depth);
+
+void *kmap_high_l1_vipt(struct page *page, pte_t *saved_pte)
+{
+ unsigned int idx, cpu = smp_processor_id();
+ int *depth = &per_cpu(kmap_high_l1_vipt_depth, cpu);
+ unsigned long vaddr, flags;
+ pte_t pte, *ptep;
+
+ idx = KM_L1_CACHE + KM_TYPE_NR * cpu;
+ vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+ ptep = TOP_PTE(vaddr);
+ pte = mk_pte(page, kmap_prot);
+
+ if (!in_interrupt())
+ preempt_disable();
+
+ raw_local_irq_save(flags);
+ (*depth)++;
+ if (pte_val(*ptep) == pte_val(pte)) {
+ *saved_pte = pte;
+ } else {
+ *saved_pte = *ptep;
+ set_pte_ext(ptep, pte, 0);
+ local_flush_tlb_kernel_page(vaddr);
+ }
+ raw_local_irq_restore(flags);
+
+ return (void *)vaddr;
+}
+
+void kunmap_high_l1_vipt(struct page *page, pte_t saved_pte)
+{
+ unsigned int idx, cpu = smp_processor_id();
+ int *depth = &per_cpu(kmap_high_l1_vipt_depth, cpu);
+ unsigned long vaddr, flags;
+ pte_t pte, *ptep;
+
+ idx = KM_L1_CACHE + KM_TYPE_NR * cpu;
+ vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+ ptep = TOP_PTE(vaddr);
+ pte = mk_pte(page, kmap_prot);
+
+ BUG_ON(pte_val(*ptep) != pte_val(pte));
+ BUG_ON(*depth <= 0);
+
+ raw_local_irq_save(flags);
+ (*depth)--;
+ if (*depth != 0 && pte_val(pte) != pte_val(saved_pte)) {
+ set_pte_ext(ptep, saved_pte, 0);
+ local_flush_tlb_kernel_page(vaddr);
+ }
+ raw_local_irq_restore(flags);
+
+ if (!in_interrupt())
+ preempt_enable();
+}
+
+#endif /* CONFIG_CPU_CACHE_VIPT */
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 7829cb5..83db12a 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -17,6 +17,7 @@
#include <linux/initrd.h>
#include <linux/sort.h>
#include <linux/highmem.h>
+#include <linux/gfp.h>
#include <asm/mach-types.h>
#include <asm/sections.h>
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 9d4da6a..241c24a 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -420,6 +420,10 @@ static void __init build_mem_type_table(void)
user_pgprot |= L_PTE_SHARED;
kern_pgprot |= L_PTE_SHARED;
vecs_pgprot |= L_PTE_SHARED;
+ mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_S;
+ mem_types[MT_DEVICE_WC].prot_pte |= L_PTE_SHARED;
+ mem_types[MT_DEVICE_CACHED].prot_sect |= PMD_SECT_S;
+ mem_types[MT_DEVICE_CACHED].prot_pte |= L_PTE_SHARED;
mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S;
#endif
@@ -1050,10 +1054,12 @@ void setup_mm_for_reboot(char mode)
pgd_t *pgd;
int i;
- if (current->mm && current->mm->pgd)
- pgd = current->mm->pgd;
- else
- pgd = init_mm.pgd;
+ /*
+ * We need to access to user-mode page tables here. For kernel threads
+ * we don't have any user-mode mappings so we use the context that we
+ * "borrowed".
+ */
+ pgd = current->active_mm->pgd;
base_pmdval = PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | PMD_TYPE_SECT;
if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale())
diff --git a/arch/arm/mm/pgd.c b/arch/arm/mm/pgd.c
index 2690146..be5f58e 100644
--- a/arch/arm/mm/pgd.c
+++ b/arch/arm/mm/pgd.c
@@ -8,6 +8,7 @@
* published by the Free Software Foundation.
*/
#include <linux/mm.h>
+#include <linux/gfp.h>
#include <linux/highmem.h>
#include <asm/pgalloc.h>
diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S
index ee77002..5c47760 100644
--- a/arch/arm/mm/proc-sa1100.S
+++ b/arch/arm/mm/proc-sa1100.S
@@ -45,7 +45,7 @@ ENTRY(cpu_sa1100_proc_init)
mcr p15, 0, r0, c9, c0, 5 @ Allow read-buffer operations from userland
mov pc, lr
- .previous
+ .section .text
/*
* cpu_sa1100_proc_fin()
generated by cgit v0.10.2 at 2024-11-09 11:47:19 (GMT)