diff options
Diffstat (limited to 'arch/arm/mm')
| -rw-r--r-- | arch/arm/mm/Kconfig | 10 | ||||
| -rw-r--r-- | arch/arm/mm/Makefile | 2 | ||||
| -rw-r--r-- | arch/arm/mm/cache-v3.S | 2 | ||||
| -rw-r--r-- | arch/arm/mm/cache-v4.S | 2 | ||||
| -rw-r--r-- | arch/arm/mm/cache-v4wt.S | 2 | ||||
| -rw-r--r-- | arch/arm/mm/cache-xsc3l2.c | 182 | ||||
| -rw-r--r-- | arch/arm/mm/consistent.c | 8 | ||||
| -rw-r--r-- | arch/arm/mm/discontig.c | 34 | ||||
| -rw-r--r-- | arch/arm/mm/fault-armv.c | 10 | ||||
| -rw-r--r-- | arch/arm/mm/init.c | 34 | ||||
| -rw-r--r-- | arch/arm/mm/ioremap.c | 2 | ||||
| -rw-r--r-- | arch/arm/mm/proc-arm720.S | 2 | ||||
| -rw-r--r-- | arch/arm/mm/proc-sa110.S | 2 | ||||
| -rw-r--r-- | arch/arm/mm/proc-sa1100.S | 2 | ||||
| -rw-r--r-- | arch/arm/mm/proc-xsc3.S | 24 |
15 files changed, 253 insertions, 65 deletions
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 3a6c8ec..ed15f87 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -187,7 +187,7 @@ config CPU_ARM926T ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || \ ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || \ ARCH_AT91SAM9G20 || ARCH_AT91CAP9 || \ - ARCH_NS9XXX || ARCH_DAVINCI + ARCH_NS9XXX || ARCH_DAVINCI || ARCH_MX2 default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || \ ARCH_OMAP730 || ARCH_OMAP16XX || \ ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || \ @@ -742,3 +742,11 @@ config CACHE_L2X0 select OUTER_CACHE help This option enables the L2x0 PrimeCell. + +config CACHE_XSC3L2 + bool "Enable the L2 cache on XScale3" + depends on CPU_XSC3 + default y + select OUTER_CACHE + help + This option enables the L2 cache on XScale3. diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile index f64b925..2e27a8c 100644 --- a/arch/arm/mm/Makefile +++ b/arch/arm/mm/Makefile @@ -76,3 +76,5 @@ obj-$(CONFIG_CPU_V7) += proc-v7.o obj-$(CONFIG_CACHE_FEROCEON_L2) += cache-feroceon-l2.o obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o +obj-$(CONFIG_CACHE_XSC3L2) += cache-xsc3l2.o + diff --git a/arch/arm/mm/cache-v3.S b/arch/arm/mm/cache-v3.S index e199478..3b3639e 100644 --- a/arch/arm/mm/cache-v3.S +++ b/arch/arm/mm/cache-v3.S @@ -9,7 +9,7 @@ */ #include <linux/linkage.h> #include <linux/init.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/page.h> #include "proc-macros.S" diff --git a/arch/arm/mm/cache-v4.S b/arch/arm/mm/cache-v4.S index b290806..33926c9 100644 --- a/arch/arm/mm/cache-v4.S +++ b/arch/arm/mm/cache-v4.S @@ -9,7 +9,7 @@ */ #include <linux/linkage.h> #include <linux/init.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/page.h> #include "proc-macros.S" diff --git a/arch/arm/mm/cache-v4wt.S b/arch/arm/mm/cache-v4wt.S index 9bcabd8..51a9b0b 100644 --- a/arch/arm/mm/cache-v4wt.S +++ b/arch/arm/mm/cache-v4wt.S @@ -13,7 +13,7 @@ */ #include <linux/linkage.h> #include <linux/init.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/page.h> #include "proc-macros.S" diff --git a/arch/arm/mm/cache-xsc3l2.c b/arch/arm/mm/cache-xsc3l2.c new file mode 100644 index 0000000..158bd96 --- /dev/null +++ b/arch/arm/mm/cache-xsc3l2.c @@ -0,0 +1,182 @@ +/* + * arch/arm/mm/cache-xsc3l2.c - XScale3 L2 cache controller support + * + * Copyright (C) 2007 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/init.h> +#include <linux/spinlock.h> + +#include <asm/system.h> +#include <asm/cacheflush.h> +#include <asm/io.h> + +#define CR_L2 (1 << 26) + +#define CACHE_LINE_SIZE 32 +#define CACHE_LINE_SHIFT 5 +#define CACHE_WAY_PER_SET 8 + +#define CACHE_WAY_SIZE(l2ctype) (8192 << (((l2ctype) >> 8) & 0xf)) +#define CACHE_SET_SIZE(l2ctype) (CACHE_WAY_SIZE(l2ctype) >> CACHE_LINE_SHIFT) + +static inline int xsc3_l2_present(void) +{ + unsigned long l2ctype; + + __asm__("mrc p15, 1, %0, c0, c0, 1" : "=r" (l2ctype)); + + return !!(l2ctype & 0xf8); +} + +static inline void xsc3_l2_clean_mva(unsigned long addr) +{ + __asm__("mcr p15, 1, %0, c7, c11, 1" : : "r" (addr)); +} + +static inline void xsc3_l2_clean_pa(unsigned long addr) +{ + xsc3_l2_clean_mva(__phys_to_virt(addr)); +} + +static inline void xsc3_l2_inv_mva(unsigned long addr) +{ + __asm__("mcr p15, 1, %0, c7, c7, 1" : : "r" (addr)); +} + +static inline void xsc3_l2_inv_pa(unsigned long addr) +{ + xsc3_l2_inv_mva(__phys_to_virt(addr)); +} + +static inline void xsc3_l2_inv_all(void) +{ + unsigned long l2ctype, set_way; + int set, way; + + __asm__("mrc p15, 1, %0, c0, c0, 1" : "=r" (l2ctype)); + + for (set = 0; set < CACHE_SET_SIZE(l2ctype); set++) { + for (way = 0; way < CACHE_WAY_PER_SET; way++) { + set_way = (way << 29) | (set << 5); + __asm__("mcr p15, 1, %0, c7, c11, 2" : : "r"(set_way)); + } + } + + dsb(); +} + +static void xsc3_l2_inv_range(unsigned long start, unsigned long end) +{ + if (start == 0 && end == -1ul) { + xsc3_l2_inv_all(); + return; + } + + /* + * Clean and invalidate partial first cache line. + */ + if (start & (CACHE_LINE_SIZE - 1)) { + xsc3_l2_clean_pa(start & ~(CACHE_LINE_SIZE - 1)); + xsc3_l2_inv_pa(start & ~(CACHE_LINE_SIZE - 1)); + start = (start | (CACHE_LINE_SIZE - 1)) + 1; + } + + /* + * Clean and invalidate partial last cache line. + */ + if (end & (CACHE_LINE_SIZE - 1)) { + xsc3_l2_clean_pa(end & ~(CACHE_LINE_SIZE - 1)); + xsc3_l2_inv_pa(end & ~(CACHE_LINE_SIZE - 1)); + end &= ~(CACHE_LINE_SIZE - 1); + } + + /* + * Invalidate all full cache lines between 'start' and 'end'. + */ + while (start != end) { + xsc3_l2_inv_pa(start); + start += CACHE_LINE_SIZE; + } + + dsb(); +} + +static void xsc3_l2_clean_range(unsigned long start, unsigned long end) +{ + start &= ~(CACHE_LINE_SIZE - 1); + while (start < end) { + xsc3_l2_clean_pa(start); + start += CACHE_LINE_SIZE; + } + + dsb(); +} + +/* + * optimize L2 flush all operation by set/way format + */ +static inline void xsc3_l2_flush_all(void) +{ + unsigned long l2ctype, set_way; + int set, way; + + __asm__("mrc p15, 1, %0, c0, c0, 1" : "=r" (l2ctype)); + + for (set = 0; set < CACHE_SET_SIZE(l2ctype); set++) { + for (way = 0; way < CACHE_WAY_PER_SET; way++) { + set_way = (way << 29) | (set << 5); + __asm__("mcr p15, 1, %0, c7, c15, 2" : : "r"(set_way)); + } + } + + dsb(); +} + +static void xsc3_l2_flush_range(unsigned long start, unsigned long end) +{ + if (start == 0 && end == -1ul) { + xsc3_l2_flush_all(); + return; + } + + start &= ~(CACHE_LINE_SIZE - 1); + while (start < end) { + xsc3_l2_clean_pa(start); + xsc3_l2_inv_pa(start); + start += CACHE_LINE_SIZE; + } + + dsb(); +} + +static int __init xsc3_l2_init(void) +{ + if (!cpu_is_xsc3() || !xsc3_l2_present()) + return 0; + + if (!(get_cr() & CR_L2)) { + pr_info("XScale3 L2 cache enabled.\n"); + adjust_cr(CR_L2, CR_L2); + xsc3_l2_inv_all(); + } + + outer_cache.inv_range = xsc3_l2_inv_range; + outer_cache.clean_range = xsc3_l2_clean_range; + outer_cache.flush_range = xsc3_l2_flush_range; + + return 0; +} +core_initcall(xsc3_l2_init); diff --git a/arch/arm/mm/consistent.c b/arch/arm/mm/consistent.c index 333a82a..db7b3e3 100644 --- a/arch/arm/mm/consistent.c +++ b/arch/arm/mm/consistent.c @@ -274,6 +274,11 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, void * dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp) { + void *memory; + + if (dma_alloc_from_coherent(dev, size, handle, &memory)) + return memory; + if (arch_is_coherent()) { void *virt; @@ -362,6 +367,9 @@ void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr WARN_ON(irqs_disabled()); + if (dma_release_from_coherent(dev, get_order(size), cpu_addr)) + return; + if (arch_is_coherent()) { kfree(cpu_addr); return; diff --git a/arch/arm/mm/discontig.c b/arch/arm/mm/discontig.c index 1e56021..c8c0c4b 100644 --- a/arch/arm/mm/discontig.c +++ b/arch/arm/mm/discontig.c @@ -21,26 +21,24 @@ * Our node_data structure for discontiguous memory. */ -static bootmem_data_t node_bootmem_data[MAX_NUMNODES]; - pg_data_t discontig_node_data[MAX_NUMNODES] = { - { .bdata = &node_bootmem_data[0] }, - { .bdata = &node_bootmem_data[1] }, - { .bdata = &node_bootmem_data[2] }, - { .bdata = &node_bootmem_data[3] }, + { .bdata = &bootmem_node_data[0] }, + { .bdata = &bootmem_node_data[1] }, + { .bdata = &bootmem_node_data[2] }, + { .bdata = &bootmem_node_data[3] }, #if MAX_NUMNODES == 16 - { .bdata = &node_bootmem_data[4] }, - { .bdata = &node_bootmem_data[5] }, - { .bdata = &node_bootmem_data[6] }, - { .bdata = &node_bootmem_data[7] }, - { .bdata = &node_bootmem_data[8] }, - { .bdata = &node_bootmem_data[9] }, - { .bdata = &node_bootmem_data[10] }, - { .bdata = &node_bootmem_data[11] }, - { .bdata = &node_bootmem_data[12] }, - { .bdata = &node_bootmem_data[13] }, - { .bdata = &node_bootmem_data[14] }, - { .bdata = &node_bootmem_data[15] }, + { .bdata = &bootmem_node_data[4] }, + { .bdata = &bootmem_node_data[5] }, + { .bdata = &bootmem_node_data[6] }, + { .bdata = &bootmem_node_data[7] }, + { .bdata = &bootmem_node_data[8] }, + { .bdata = &bootmem_node_data[9] }, + { .bdata = &bootmem_node_data[10] }, + { .bdata = &bootmem_node_data[11] }, + { .bdata = &bootmem_node_data[12] }, + { .bdata = &bootmem_node_data[13] }, + { .bdata = &bootmem_node_data[14] }, + { .bdata = &bootmem_node_data[15] }, #endif }; diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c index fbfa260..a8ec97b 100644 --- a/arch/arm/mm/fault-armv.c +++ b/arch/arm/mm/fault-armv.c @@ -37,7 +37,7 @@ static int adjust_pte(struct vm_area_struct *vma, unsigned long address) pgd_t *pgd; pmd_t *pmd; pte_t *pte, entry; - int ret = 0; + int ret; pgd = pgd_offset(vma->vm_mm, address); if (pgd_none(*pgd)) @@ -55,15 +55,19 @@ static int adjust_pte(struct vm_area_struct *vma, unsigned long address) entry = *pte; /* + * If this page is present, it's actually being shared. + */ + ret = pte_present(entry); + + /* * If this page isn't present, or is already setup to * fault (ie, is old), we can safely ignore any issues. */ - if (pte_present(entry) && pte_val(entry) & shared_pte_mask) { + if (ret && pte_val(entry) & shared_pte_mask) { flush_cache_page(vma, address, pte_pfn(entry)); pte_val(entry) &= ~shared_pte_mask; set_pte_at(vma->vm_mm, address, pte, entry); flush_tlb_page(vma, address); - ret = 1; } pte_unmap(pte); return ret; diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index b657f17..30a69d6 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -156,9 +156,9 @@ static int __init check_initrd(struct meminfo *mi) } if (initrd_node == -1) { - printk(KERN_ERR "initrd (0x%08lx - 0x%08lx) extends beyond " + printk(KERN_ERR "INITRD: 0x%08lx+0x%08lx extends beyond " "physical memory - disabling initrd\n", - phys_initrd_start, end); + phys_initrd_start, phys_initrd_size); phys_initrd_start = phys_initrd_size = 0; } #endif @@ -239,25 +239,33 @@ bootmem_init_node(int node, int initrd_node, struct meminfo *mi) reserve_bootmem_node(pgdat, boot_pfn << PAGE_SHIFT, boot_pages << PAGE_SHIFT, BOOTMEM_DEFAULT); + /* + * Reserve any special node zero regions. + */ + if (node == 0) + reserve_node_zero(pgdat); + #ifdef CONFIG_BLK_DEV_INITRD /* * If the initrd is in this node, reserve its memory. */ if (node == initrd_node) { - reserve_bootmem_node(pgdat, phys_initrd_start, - phys_initrd_size, BOOTMEM_DEFAULT); - initrd_start = __phys_to_virt(phys_initrd_start); - initrd_end = initrd_start + phys_initrd_size; + int res = reserve_bootmem_node(pgdat, phys_initrd_start, + phys_initrd_size, BOOTMEM_EXCLUSIVE); + + if (res == 0) { + initrd_start = __phys_to_virt(phys_initrd_start); + initrd_end = initrd_start + phys_initrd_size; + } else { + printk(KERN_ERR + "INITRD: 0x%08lx+0x%08lx overlaps in-use " + "memory region - disabling initrd\n", + phys_initrd_start, phys_initrd_size); + } } #endif /* - * Finally, reserve any node zero regions. - */ - if (node == 0) - reserve_node_zero(pgdat); - - /* * initialise the zones within this node. */ memset(zone_size, 0, sizeof(zone_size)); @@ -284,7 +292,7 @@ bootmem_init_node(int node, int initrd_node, struct meminfo *mi) */ arch_adjust_zones(node, zone_size, zhole_size); - free_area_init_node(node, pgdat, zone_size, start_pfn, zhole_size); + free_area_init_node(node, zone_size, start_pfn, zhole_size); return end_pfn; } diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index 303a7ff..b81dbf9 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -259,7 +259,7 @@ remap_area_supersections(unsigned long virt, unsigned long pfn, * caller shouldn't need to know that small detail. * * 'flags' are the extra L_PTE_ flags that you want to specify for this - * mapping. See include/asm-arm/proc-armv/pgtable.h for more information. + * mapping. See <asm/pgtable.h> for more information. */ void __iomem * __arm_ioremap_pfn(unsigned long pfn, unsigned long offset, size_t size, diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S index d64f8e6..eda733d 100644 --- a/arch/arm/mm/proc-arm720.S +++ b/arch/arm/mm/proc-arm720.S @@ -231,7 +231,7 @@ cpu_arm720_name: .align /* - * See linux/include/asm-arm/procinfo.h for a definition of this structure. + * See <asm/procinfo.h> for a definition of this structure. */ .section ".proc.info.init", #alloc, #execinstr diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S index 9818195..bbe1057 100644 --- a/arch/arm/mm/proc-sa110.S +++ b/arch/arm/mm/proc-sa110.S @@ -18,7 +18,7 @@ #include <asm/assembler.h> #include <asm/asm-offsets.h> #include <asm/elf.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/pgtable-hwdef.h> #include <asm/pgtable.h> #include <asm/ptrace.h> diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S index c5fe27a..871ba01 100644 --- a/arch/arm/mm/proc-sa1100.S +++ b/arch/arm/mm/proc-sa1100.S @@ -23,7 +23,7 @@ #include <asm/assembler.h> #include <asm/asm-offsets.h> #include <asm/elf.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/pgtable-hwdef.h> #include <asm/pgtable.h> diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index 3533741..7bd9e71 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -28,7 +28,7 @@ #include <linux/init.h> #include <asm/assembler.h> #include <asm/elf.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/pgtable.h> #include <asm/pgtable-hwdef.h> #include <asm/page.h> @@ -52,11 +52,6 @@ #define CACHESIZE 32768 /* - * Run with L2 enabled. - */ -#define L2_CACHE_ENABLE 1 - -/* * This macro is used to wait for a CP15 write and is needed when we * have to ensure that the last operation to the coprocessor was * completed before continuing with operation. @@ -265,12 +260,9 @@ ENTRY(xsc3_dma_inv_range) tst r0, #CACHELINESIZE - 1 bic r0, r0, #CACHELINESIZE - 1 mcrne p15, 0, r0, c7, c10, 1 @ clean L1 D line - mcrne p15, 1, r0, c7, c11, 1 @ clean L2 line tst r1, #CACHELINESIZE - 1 mcrne p15, 0, r1, c7, c10, 1 @ clean L1 D line - mcrne p15, 1, r1, c7, c11, 1 @ clean L2 line 1: mcr p15, 0, r0, c7, c6, 1 @ invalidate L1 D line - mcr p15, 1, r0, c7, c7, 1 @ invalidate L2 line add r0, r0, #CACHELINESIZE cmp r0, r1 blo 1b @@ -288,7 +280,6 @@ ENTRY(xsc3_dma_inv_range) ENTRY(xsc3_dma_clean_range) bic r0, r0, #CACHELINESIZE - 1 1: mcr p15, 0, r0, c7, c10, 1 @ clean L1 D line - mcr p15, 1, r0, c7, c11, 1 @ clean L2 line add r0, r0, #CACHELINESIZE cmp r0, r1 blo 1b @@ -306,8 +297,6 @@ ENTRY(xsc3_dma_clean_range) ENTRY(xsc3_dma_flush_range) bic r0, r0, #CACHELINESIZE - 1 1: mcr p15, 0, r0, c7, c14, 1 @ clean/invalidate L1 D line - mcr p15, 1, r0, c7, c11, 1 @ clean L2 line - mcr p15, 1, r0, c7, c7, 1 @ invalidate L2 line add r0, r0, #CACHELINESIZE cmp r0, r1 blo 1b @@ -347,9 +336,7 @@ ENTRY(cpu_xsc3_switch_mm) mcr p15, 0, ip, c7, c5, 0 @ invalidate L1 I cache and BTB mcr p15, 0, ip, c7, c10, 4 @ data write barrier mcr p15, 0, ip, c7, c5, 4 @ prefetch flush -#ifdef L2_CACHE_ENABLE orr r0, r0, #0x18 @ cache the page table in L2 -#endif mcr p15, 0, r0, c2, c0, 0 @ load page table pointer mcr p15, 0, ip, c8, c7, 0 @ invalidate I and D TLBs cpwait_ret lr, ip @@ -378,12 +365,10 @@ ENTRY(cpu_xsc3_set_pte_ext) orreq r2, r2, #PTE_EXT_AP_UNO_SRW @ yes -> user n/a, system r/w @ combined with user -> user r/w -#if L2_CACHE_ENABLE @ If it's cacheable, it needs to be in L2 also. eor ip, r1, #L_PTE_CACHEABLE tst ip, #L_PTE_CACHEABLE orreq r2, r2, #PTE_EXT_TEX(0x5) -#endif tst r3, #L_PTE_PRESENT | L_PTE_YOUNG @ present and young? movne r2, #0 @ no -> fault @@ -408,9 +393,7 @@ __xsc3_setup: mcr p15, 0, ip, c7, c10, 4 @ data write barrier mcr p15, 0, ip, c7, c5, 4 @ prefetch flush mcr p15, 0, ip, c8, c7, 0 @ invalidate I and D TLBs -#if L2_CACHE_ENABLE orr r4, r4, #0x18 @ cache the page table in L2 -#endif mcr p15, 0, r4, c2, c0, 0 @ load page table pointer mov r0, #0 @ don't allow CP access @@ -418,9 +401,7 @@ __xsc3_setup: mrc p15, 0, r0, c1, c0, 1 @ get auxiliary control reg and r0, r0, #2 @ preserve bit P bit setting -#if L2_CACHE_ENABLE orr r0, r0, #(1 << 10) @ enable L2 for LLR cache -#endif mcr p15, 0, r0, c1, c0, 1 @ set auxiliary control reg adr r5, xsc3_crval @@ -429,9 +410,6 @@ __xsc3_setup: bic r0, r0, r5 @ ..V. ..R. .... ..A. orr r0, r0, r6 @ ..VI Z..S .... .C.M (mmu) @ ...I Z..S .... .... (uc) -#if L2_CACHE_ENABLE - orr r0, r0, #0x04000000 @ L2 enable -#endif mov pc, lr .size __xsc3_setup, . - __xsc3_setup |