diff options
Diffstat (limited to 'arch/arm/plat-omap/include')
-rw-r--r-- | arch/arm/plat-omap/include/mach/board-h2.h | 6 | ||||
-rw-r--r-- | arch/arm/plat-omap/include/mach/board.h | 22 | ||||
-rw-r--r-- | arch/arm/plat-omap/include/mach/control.h | 17 | ||||
-rw-r--r-- | arch/arm/plat-omap/include/mach/mmc.h | 74 |
4 files changed, 88 insertions, 31 deletions
diff --git a/arch/arm/plat-omap/include/mach/board-h2.h b/arch/arm/plat-omap/include/mach/board-h2.h index 2a050e9..15531c8 100644 --- a/arch/arm/plat-omap/include/mach/board-h2.h +++ b/arch/arm/plat-omap/include/mach/board-h2.h @@ -29,13 +29,13 @@ #ifndef __ASM_ARCH_OMAP_H2_H #define __ASM_ARCH_OMAP_H2_H -/* Placeholder for H2 specific defines */ - /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */ #define OMAP1610_ETHR_START 0x04000300 +#define H2_TPS_GPIO_BASE (OMAP_MAX_GPIO_LINES + 16 /* MPUIO */) +# define H2_TPS_GPIO_MMC_PWR_EN (H2_TPS_GPIO_BASE + 3) + extern void h2_mmc_init(void); -extern void h2_mmc_slot_cover_handler(void *arg, int state); #endif /* __ASM_ARCH_OMAP_H2_H */ diff --git a/arch/arm/plat-omap/include/mach/board.h b/arch/arm/plat-omap/include/mach/board.h index c23c12c..9466772 100644 --- a/arch/arm/plat-omap/include/mach/board.h +++ b/arch/arm/plat-omap/include/mach/board.h @@ -16,7 +16,6 @@ /* Different peripheral ids */ #define OMAP_TAG_CLOCK 0x4f01 -#define OMAP_TAG_MMC 0x4f02 #define OMAP_TAG_SERIAL_CONSOLE 0x4f03 #define OMAP_TAG_USB 0x4f04 #define OMAP_TAG_LCD 0x4f05 @@ -35,27 +34,6 @@ struct omap_clock_config { u8 system_clock_type; }; -struct omap_mmc_conf { - unsigned enabled:1; - /* nomux means "standard" muxing is wrong on this board, and that - * board-specific code handled it before common init logic. - */ - unsigned nomux:1; - /* switch pin can be for card detect (default) or card cover */ - unsigned cover:1; - /* 4 wire signaling is optional, and is only used for SD/SDIO */ - unsigned wire4:1; - /* use the internal clock */ - unsigned internal_clock:1; - s16 power_pin; - s16 switch_pin; - s16 wp_pin; -}; - -struct omap_mmc_config { - struct omap_mmc_conf mmc[2]; -}; - struct omap_serial_console_config { u8 console_uart; u32 console_speed; diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/mach/control.h index dc988676..269147f 100644 --- a/arch/arm/plat-omap/include/mach/control.h +++ b/arch/arm/plat-omap/include/mach/control.h @@ -74,6 +74,7 @@ #define OMAP243X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190) #define OMAP243X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194) #define OMAP243X_CONTROL_IVA2_GEMCFG (OMAP2_CONTROL_GENERAL + 0x0198) +#define OMAP243X_CONTROL_PBIAS_LITE (OMAP2_CONTROL_GENERAL + 0x0230) /* 24xx-only CONTROL_GENERAL register offsets */ #define OMAP24XX_CONTROL_DEBOBS (OMAP2_CONTROL_GENERAL + 0x0000) @@ -140,6 +141,7 @@ #define OMAP343X_CONTROL_TEST_KEY_13 (OMAP2_CONTROL_GENERAL + 0x00fc) #define OMAP343X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190) #define OMAP343X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194) +#define OMAP343X_CONTROL_PBIAS_LITE (OMAP2_CONTROL_GENERAL + 0x02b0) #define OMAP343X_CONTROL_TEMP_SENSOR (OMAP2_CONTROL_GENERAL + 0x02b4) /* @@ -154,11 +156,14 @@ * and the security mode (secure, non-secure, don't care) */ /* CONTROL_DEVCONF0 bits */ +#define OMAP2_MMCSDIO1ADPCLKISEL (1 << 24) /* MMC1 loop back clock */ #define OMAP24XX_USBSTANDBYCTRL (1 << 15) #define OMAP2_MCBSP2_CLKS_MASK (1 << 6) #define OMAP2_MCBSP1_CLKS_MASK (1 << 2) /* CONTROL_DEVCONF1 bits */ +#define OMAP243X_MMC1_ACTIVE_OVERWRITE (1 << 31) +#define OMAP2_MMCSDIO2ADPCLKISEL (1 << 6) /* MMC2 loop back clock */ #define OMAP2_MCBSP5_CLKS_MASK (1 << 4) /* > 242x */ #define OMAP2_MCBSP4_CLKS_MASK (1 << 2) /* > 242x */ #define OMAP2_MCBSP3_CLKS_MASK (1 << 0) /* > 242x */ @@ -172,6 +177,18 @@ #define OMAP2_SYSBOOT_1_MASK (1 << 1) #define OMAP2_SYSBOOT_0_MASK (1 << 0) +/* CONTROL_PBIAS_LITE bits */ +#define OMAP343X_PBIASLITESUPPLY_HIGH1 (1 << 15) +#define OMAP343X_PBIASLITEVMODEERROR1 (1 << 11) +#define OMAP343X_PBIASSPEEDCTRL1 (1 << 10) +#define OMAP343X_PBIASLITEPWRDNZ1 (1 << 9) +#define OMAP343X_PBIASLITEVMODE1 (1 << 8) +#define OMAP343X_PBIASLITESUPPLY_HIGH0 (1 << 7) +#define OMAP343X_PBIASLITEVMODEERROR0 (1 << 3) +#define OMAP2_PBIASSPEEDCTRL0 (1 << 2) +#define OMAP2_PBIASLITEPWRDNZ0 (1 << 1) +#define OMAP2_PBIASLITEVMODE0 (1 << 0) + #ifndef __ASSEMBLY__ #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) extern void __iomem *omap_ctrl_base_get(void); diff --git a/arch/arm/plat-omap/include/mach/mmc.h b/arch/arm/plat-omap/include/mach/mmc.h index fc15d13..031250f 100644 --- a/arch/arm/plat-omap/include/mach/mmc.h +++ b/arch/arm/plat-omap/include/mach/mmc.h @@ -17,12 +17,28 @@ #include <mach/board.h> +#define OMAP15XX_NR_MMC 1 +#define OMAP16XX_NR_MMC 2 +#define OMAP1_MMC_SIZE 0x080 +#define OMAP1_MMC1_BASE 0xfffb7800 +#define OMAP1_MMC2_BASE 0xfffb7c00 /* omap16xx only */ + +#define OMAP24XX_NR_MMC 2 +#define OMAP34XX_NR_MMC 3 +#define OMAP2420_MMC_SIZE OMAP1_MMC_SIZE +#define HSMMC_SIZE 0x200 +#define OMAP2_MMC1_BASE 0x4809c000 +#define OMAP2_MMC2_BASE 0x480b4000 +#define OMAP3_MMC3_BASE 0x480ad000 +#define HSMMC3 (1 << 2) +#define HSMMC2 (1 << 1) +#define HSMMC1 (1 << 0) + #define OMAP_MMC_MAX_SLOTS 2 struct omap_mmc_platform_data { - struct omap_mmc_conf conf; - /* number of slots on board */ + /* number of slots per controller */ unsigned nr_slots:2; /* set if your board has components or wiring that limits the @@ -41,7 +57,31 @@ struct omap_mmc_platform_data { int (*suspend)(struct device *dev, int slot); int (*resume)(struct device *dev, int slot); + u64 dma_mask; + struct omap_mmc_slot_data { + + /* 4 wire signaling is optional, and is used for SD/SDIO/HSMMC; + * 8 wire signaling is also optional, and is used with HSMMC + */ + u8 wires; + + /* + * nomux means "standard" muxing is wrong on this board, and + * that board-specific code handled it before common init logic. + */ + unsigned nomux:1; + + /* switch pin can be for card detect (default) or card cover */ + unsigned cover:1; + + /* use the internal clock */ + unsigned internal_clock:1; + s16 power_pin; + + int switch_pin; /* gpio (card detect) */ + int gpio_wp; /* gpio (write protect) */ + int (* set_bus_mode)(struct device *dev, int slot, int bus_mode); int (* set_power)(struct device *dev, int slot, int power_on, int vdd); int (* get_ro)(struct device *dev, int slot); @@ -49,8 +89,8 @@ struct omap_mmc_platform_data { /* return MMC cover switch state, can be NULL if not supported. * * possible return values: - * 0 - open - * 1 - closed + * 0 - closed + * 1 - open */ int (* get_cover_state)(struct device *dev, int slot); @@ -66,9 +106,31 @@ struct omap_mmc_platform_data { } slots[OMAP_MMC_MAX_SLOTS]; }; -extern void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info); - /* called from board-specific card detection service routine */ extern void omap_mmc_notify_cover_event(struct device *dev, int slot, int is_closed); +#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \ + defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE) +void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, + int nr_controllers); +void omap2_init_mmc(struct omap_mmc_platform_data **mmc_data, + int nr_controllers); +int omap_mmc_add(int id, unsigned long base, unsigned long size, + unsigned int irq, struct omap_mmc_platform_data *data); +#else +static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, + int nr_controllers) +{ +} +static inline void omap2_init_mmc(struct omap_mmc_platform_data **mmc_data, + int nr_controllers) +{ +} +static inline int omap_mmc_add(int id, unsigned long base, unsigned long size, + unsigned int irq, struct omap_mmc_platform_data *data) +{ + return 0; +} + +#endif #endif |