diff options
Diffstat (limited to 'arch/arm')
210 files changed, 3892 insertions, 7724 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 4344930..7275009 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -469,7 +469,7 @@ config ARCH_IXP4XX config ARCH_DOVE bool "Marvell Dove" - select CPU_V6K + select CPU_V7 select PCI select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS @@ -850,6 +850,7 @@ config ARCH_DAVINCI select HAVE_IDE select CLKDEV_LOOKUP select GENERIC_ALLOCATOR + select GENERIC_IRQ_CHIP select ARCH_HAS_HOLES_MEMORYMODEL help Support for TI's DaVinci platform. @@ -1027,6 +1028,7 @@ config PLAT_IOP config PLAT_ORION bool select CLKSRC_MMIO + select GENERIC_IRQ_CHIP select HAVE_SCHED_CLOCK config PLAT_PXA diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 458a015..25750bc 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -158,9 +158,8 @@ machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0 machine-$(CONFIG_ARCH_MX1) := imx machine-$(CONFIG_ARCH_MX2) := imx machine-$(CONFIG_ARCH_MX25) := imx -machine-$(CONFIG_ARCH_MX3) := mx3 +machine-$(CONFIG_ARCH_MX3) := imx machine-$(CONFIG_ARCH_MX5) := mx5 -machine-$(CONFIG_ARCH_MXC91231) := mxc91231 machine-$(CONFIG_ARCH_MXS) := mxs machine-$(CONFIG_ARCH_NETX) := netx machine-$(CONFIG_ARCH_NOMADIK) := nomadik diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 0c6852d..23aad07 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -98,8 +98,6 @@ endif ccflags-y := -fpic -fno-builtin asflags-y := -Wa,-march=all -# Provide size of uncompressed kernel to the decompressor via a linker symbol. -LDFLAGS_vmlinux = --defsym _image_size=$(shell stat -c "%s" $(obj)/../Image) # Supply ZRELADDR to the decompressor via a linker symbol. ifneq ($(CONFIG_AUTO_ZRELADDR),y) LDFLAGS_vmlinux += --defsym zreladdr=$(ZRELADDR) @@ -122,10 +120,23 @@ lib1funcs = $(obj)/lib1funcs.o $(obj)/lib1funcs.S: $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S FORCE $(call cmd,shipped) +# We need to prevent any GOTOFF relocs being used with references +# to symbols in the .bss section since we cannot relocate them +# independently from the rest at run time. This can be achieved by +# ensuring that no private .bss symbols exist, as global symbols +# always have a GOT entry which is what we need. +# The .data section is already discarded by the linker script so no need +# to bother about it here. +check_for_bad_syms = \ +bad_syms=$$($(CROSS_COMPILE)nm $@ | sed -n 's/^.\{8\} [bc] \(.*\)/\1/p') && \ +[ -z "$$bad_syms" ] || \ + ( echo "following symbols must have non local/private scope:" >&2; \ + echo "$$bad_syms" >&2; rm -f $@; false ) + $(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \ $(addprefix $(obj)/, $(OBJS)) $(lib1funcs) FORCE $(call if_changed,ld) - @: + @$(check_for_bad_syms) $(obj)/piggy.$(suffix_y): $(obj)/../Image FORCE $(call if_changed,$(suffix_y)) diff --git a/arch/arm/boot/compressed/decompress.c b/arch/arm/boot/compressed/decompress.c index 4c72a97..07be5a2 100644 --- a/arch/arm/boot/compressed/decompress.c +++ b/arch/arm/boot/compressed/decompress.c @@ -44,7 +44,7 @@ extern void error(char *); #include "../../../../lib/decompress_unlzma.c" #endif -void do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x)) +int do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x)) { - decompress(input, len, NULL, NULL, output, NULL, error); + return decompress(input, len, NULL, NULL, output, NULL, error); } diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 6fdf4ab..f9da419 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -179,7 +179,7 @@ not_angel: bl cache_on restart: adr r0, LC0 - ldmia r0, {r1, r2, r3, r6, r9, r11, r12} + ldmia r0, {r1, r2, r3, r6, r10, r11, r12} ldr sp, [r0, #28] /* @@ -188,6 +188,20 @@ restart: adr r0, LC0 */ sub r0, r0, r1 @ calculate the delta offset add r6, r6, r0 @ _edata + add r10, r10, r0 @ inflated kernel size location + + /* + * The kernel build system appends the size of the + * decompressed kernel at the end of the compressed data + * in little-endian form. + */ + ldrb r9, [r10, #0] + ldrb lr, [r10, #1] + orr r9, r9, lr, lsl #8 + ldrb lr, [r10, #2] + ldrb r10, [r10, #3] + orr r9, r9, lr, lsl #16 + orr r9, r9, r10, lsl #24 #ifndef CONFIG_ZBOOT_ROM /* malloc space is above the relocated stack (64k max) */ @@ -347,10 +361,10 @@ LC0: .word LC0 @ r1 .word __bss_start @ r2 .word _end @ r3 .word _edata @ r6 - .word _image_size @ r9 + .word input_data_end - 4 @ r10 (inflated size location) .word _got_start @ r11 .word _got_end @ ip - .word user_stack_end @ sp + .word .L_user_stack_end @ sp .size LC0, . - LC0 #ifdef CONFIG_ARCH_RPC @@ -763,12 +777,6 @@ proc_types: W(b) __armv4_mmu_cache_off W(b) __armv6_mmu_cache_flush - .word 0x560f5810 @ Marvell PJ4 ARMv6 - .word 0xff0ffff0 - W(b) __armv4_mmu_cache_on - W(b) __armv4_mmu_cache_off - W(b) __armv6_mmu_cache_flush - .word 0x000f0000 @ new CPU Id .word 0x000f0000 W(b) __armv7_mmu_cache_on @@ -1094,5 +1102,5 @@ reloc_code_end: .align .section ".stack", "aw", %nobits -user_stack: .space 4096 -user_stack_end: +.L_user_stack: .space 4096 +.L_user_stack_end: diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c index 2df3826..832d372 100644 --- a/arch/arm/boot/compressed/misc.c +++ b/arch/arm/boot/compressed/misc.c @@ -26,8 +26,6 @@ unsigned int __machine_arch_type; #include <linux/linkage.h> #include <asm/string.h> -#include <asm/unaligned.h> - static void putstr(const char *ptr); extern void error(char *x); @@ -139,13 +137,12 @@ void *memcpy(void *__dest, __const void *__src, size_t __n) } /* - * gzip delarations + * gzip declarations */ extern char input_data[]; extern char input_data_end[]; unsigned char *output_data; -unsigned long output_ptr; unsigned long free_mem_ptr; unsigned long free_mem_end_ptr; @@ -170,15 +167,15 @@ asmlinkage void __div0(void) error("Attempting division by 0!"); } -extern void do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x)); +extern int do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x)); -unsigned long +void decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p, unsigned long free_mem_ptr_end_p, int arch_id) { - unsigned char *tmp; + int ret; output_data = (unsigned char *)output_start; free_mem_ptr = free_mem_ptr_p; @@ -187,12 +184,11 @@ decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p, arch_decomp_setup(); - tmp = (unsigned char *) (((unsigned long)input_data_end) - 4); - output_ptr = get_unaligned_le32(tmp); - putstr("Uncompressing Linux..."); - do_decompress(input_data, input_data_end - input_data, - output_data, error); - putstr(" done, booting the kernel.\n"); - return output_ptr; + ret = do_decompress(input_data, input_data_end - input_data, + output_data, error); + if (ret) + error("decompressor returned an error"); + else + putstr(" done, booting the kernel.\n"); } diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index f70ec7d..4ddd0a6 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -49,7 +49,7 @@ struct gic_chip_data { * Default make them NULL. */ struct irq_chip gic_arch_extn = { - .irq_ack = NULL, + .irq_eoi = NULL, .irq_mask = NULL, .irq_unmask = NULL, .irq_retrigger = NULL, @@ -84,21 +84,12 @@ static inline unsigned int gic_irq(struct irq_data *d) /* * Routines to acknowledge, disable and enable interrupts */ -static void gic_ack_irq(struct irq_data *d) -{ - spin_lock(&irq_controller_lock); - if (gic_arch_extn.irq_ack) - gic_arch_extn.irq_ack(d); - writel(gic_irq(d), gic_cpu_base(d) + GIC_CPU_EOI); - spin_unlock(&irq_controller_lock); -} - static void gic_mask_irq(struct irq_data *d) { u32 mask = 1 << (d->irq % 32); spin_lock(&irq_controller_lock); - writel(mask, gic_dist_base(d) + GIC_DIST_ENABLE_CLEAR + (gic_irq(d) / 32) * 4); + writel_relaxed(mask, gic_dist_base(d) + GIC_DIST_ENABLE_CLEAR + (gic_irq(d) / 32) * 4); if (gic_arch_extn.irq_mask) gic_arch_extn.irq_mask(d); spin_unlock(&irq_controller_lock); @@ -111,10 +102,21 @@ static void gic_unmask_irq(struct irq_data *d) spin_lock(&irq_controller_lock); if (gic_arch_extn.irq_unmask) gic_arch_extn.irq_unmask(d); - writel(mask, gic_dist_base(d) + GIC_DIST_ENABLE_SET + (gic_irq(d) / 32) * 4); + writel_relaxed(mask, gic_dist_base(d) + GIC_DIST_ENABLE_SET + (gic_irq(d) / 32) * 4); spin_unlock(&irq_controller_lock); } +static void gic_eoi_irq(struct irq_data *d) +{ + if (gic_arch_extn.irq_eoi) { + spin_lock(&irq_controller_lock); + gic_arch_extn.irq_eoi(d); + spin_unlock(&irq_controller_lock); + } + + writel_relaxed(gic_irq(d), gic_cpu_base(d) + GIC_CPU_EOI); +} + static int gic_set_type(struct irq_data *d, unsigned int type) { void __iomem *base = gic_dist_base(d); @@ -138,7 +140,7 @@ static int gic_set_type(struct irq_data *d, unsigned int type) if (gic_arch_extn.irq_set_type) gic_arch_extn.irq_set_type(d, type); - val = readl(base + GIC_DIST_CONFIG + confoff); + val = readl_relaxed(base + GIC_DIST_CONFIG + confoff); if (type == IRQ_TYPE_LEVEL_HIGH) val &= ~confmask; else if (type == IRQ_TYPE_EDGE_RISING) @@ -148,15 +150,15 @@ static int gic_set_type(struct irq_data *d, unsigned int type) * As recommended by the spec, disable the interrupt before changing * the configuration */ - if (readl(base + GIC_DIST_ENABLE_SET + enableoff) & enablemask) { - writel(enablemask, base + GIC_DIST_ENABLE_CLEAR + enableoff); + if (readl_relaxed(base + GIC_DIST_ENABLE_SET + enableoff) & enablemask) { + writel_relaxed(enablemask, base + GIC_DIST_ENABLE_CLEAR + enableoff); enabled = true; } - writel(val, base + GIC_DIST_CONFIG + confoff); + writel_relaxed(val, base + GIC_DIST_CONFIG + confoff); if (enabled) - writel(enablemask, base + GIC_DIST_ENABLE_SET + enableoff); + writel_relaxed(enablemask, base + GIC_DIST_ENABLE_SET + enableoff); spin_unlock(&irq_controller_lock); @@ -188,8 +190,8 @@ static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val, spin_lock(&irq_controller_lock); d->node = cpu; - val = readl(reg) & ~mask; - writel(val | bit, reg); + val = readl_relaxed(reg) & ~mask; + writel_relaxed(val | bit, reg); spin_unlock(&irq_controller_lock); return 0; @@ -218,11 +220,10 @@ static void gic_handle_cascade_irq(unsigned int irq, struct irq_desc *desc) unsigned int cascade_irq, gic_irq; unsigned long status; - /* primary controller ack'ing */ - chip->irq_ack(&desc->irq_data); + chained_irq_enter(chip, desc); spin_lock(&irq_controller_lock); - status = readl(chip_data->cpu_base + GIC_CPU_INTACK); + status = readl_relaxed(chip_data->cpu_base + GIC_CPU_INTACK); spin_unlock(&irq_controller_lock); gic_irq = (status & 0x3ff); @@ -236,15 +237,14 @@ static void gic_handle_cascade_irq(unsigned int irq, struct irq_desc *desc) generic_handle_irq(cascade_irq); out: - /* primary controller unmasking */ - chip->irq_unmask(&desc->irq_data); + chained_irq_exit(chip, desc); } static struct irq_chip gic_chip = { .name = "GIC", - .irq_ack = gic_ack_irq, .irq_mask = gic_mask_irq, .irq_unmask = gic_unmask_irq, + .irq_eoi = gic_eoi_irq, .irq_set_type = gic_set_type, .irq_retrigger = gic_retrigger, #ifdef CONFIG_SMP @@ -272,13 +272,13 @@ static void __init gic_dist_init(struct gic_chip_data *gic, cpumask |= cpumask << 8; cpumask |= cpumask << 16; - writel(0, base + GIC_DIST_CTRL); + writel_relaxed(0, base + GIC_DIST_CTRL); /* * Find out how many interrupts are supported. * The GIC only supports up to 1020 interrupt sources. */ - gic_irqs = readl(base + GIC_DIST_CTR) & 0x1f; + gic_irqs = readl_relaxed(base + GIC_DIST_CTR) & 0x1f; gic_irqs = (gic_irqs + 1) * 32; if (gic_irqs > 1020) gic_irqs = 1020; @@ -287,26 +287,26 @@ static void __init gic_dist_init(struct gic_chip_data *gic, * Set all global interrupts to be level triggered, active low. */ for (i = 32; i < gic_irqs; i += 16) - writel(0, base + GIC_DIST_CONFIG + i * 4 / 16); + writel_relaxed(0, base + GIC_DIST_CONFIG + i * 4 / 16); /* * Set all global interrupts to this CPU only. */ for (i = 32; i < gic_irqs; i += 4) - writel(cpumask, base + GIC_DIST_TARGET + i * 4 / 4); + writel_relaxed(cpumask, base + GIC_DIST_TARGET + i * 4 / 4); /* * Set priority on all global interrupts. */ for (i = 32; i < gic_irqs; i += 4) - writel(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4); + writel_relaxed(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4); /* * Disable all interrupts. Leave the PPI and SGIs alone * as these enables are banked registers. */ for (i = 32; i < gic_irqs; i += 32) - writel(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32); + writel_relaxed(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32); /* * Limit number of interrupts registered to the platform maximum @@ -319,12 +319,12 @@ static void __init gic_dist_init(struct gic_chip_data *gic, * Setup the Linux IRQ subsystem. */ for (i = irq_start; i < irq_limit; i++) { - irq_set_chip_and_handler(i, &gic_chip, handle_level_irq); + irq_set_chip_and_handler(i, &gic_chip, handle_fasteoi_irq); irq_set_chip_data(i, gic); set_irq_flags(i, IRQF_VALID | IRQF_PROBE); } - writel(1, base + GIC_DIST_CTRL); + writel_relaxed(1, base + GIC_DIST_CTRL); } static void __cpuinit gic_cpu_init(struct gic_chip_data *gic) @@ -337,17 +337,17 @@ static void __cpuinit gic_cpu_init(struct gic_chip_data *gic) * Deal with the banked PPI and SGI interrupts - disable all * PPI interrupts, ensure all SGI interrupts are enabled. */ - writel(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR); - writel(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET); + writel_relaxed(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR); + writel_relaxed(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET); /* * Set priority on PPI and SGI interrupts */ for (i = 0; i < 32; i += 4) - writel(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4); + writel_relaxed(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4); - writel(0xf0, base + GIC_CPU_PRIMASK); - writel(1, base + GIC_CPU_CTRL); + writel_relaxed(0xf0, base + GIC_CPU_PRIMASK); + writel_relaxed(1, base + GIC_CPU_CTRL); } void __init gic_init(unsigned int gic_nr, unsigned int irq_start, @@ -391,7 +391,13 @@ void gic_raise_softirq(const struct cpumask *mask, unsigned int irq) { unsigned long map = *cpus_addr(*mask); + /* + * Ensure that stores to Normal memory are visible to the + * other CPUs before issuing the IPI. + */ + dsb(); + /* this always happens on GIC0 */ - writel(map << 16 | irq, gic_data[0].dist_base + GIC_DIST_SOFTINT); + writel_relaxed(map << 16 | irq, gic_data[0].dist_base + GIC_DIST_SOFTINT); } #endif diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig index 54bf5ee..40db34c 100644 --- a/arch/arm/configs/dove_defconfig +++ b/arch/arm/configs/dove_defconfig @@ -8,8 +8,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_DOVE=y CONFIG_MACH_DOVE_DB=y -CONFIG_CPU_V6=y -CONFIG_CPU_32v6K=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_AEABI=y @@ -44,7 +42,6 @@ CONFIG_MTD_UBI=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=1 -# CONFIG_MISC_DEVICES is not set # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_LOWLEVEL is not set @@ -59,12 +56,12 @@ CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set # CONFIG_MOUSE_PS2 is not set # CONFIG_SERIO is not set +CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_DEVKMEM is not set CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y # CONFIG_SERIAL_8250_PCI is not set CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_HW_RANDOM is not set CONFIG_I2C=y CONFIG_I2C_CHARDEV=y @@ -72,12 +69,10 @@ CONFIG_I2C_MV64XXX=y CONFIG_SPI=y CONFIG_SPI_ORION=y # CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set CONFIG_USB=y CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y -CONFIG_USB_EHCI_TT_NEWSCHED=y CONFIG_USB_STORAGE=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_MV=y @@ -86,7 +81,6 @@ CONFIG_MV_XOR=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -CONFIG_INOTIFY=y CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_UDF_FS=m @@ -110,23 +104,19 @@ CONFIG_DEBUG_KERNEL=y CONFIG_TIMER_STATS=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y CONFIG_CRYPTO_NULL=y -CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_MD4=y -CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y CONFIG_CRYPTO_AES=y CONFIG_CRYPTO_BLOWFISH=y -CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_TEA=y CONFIG_CRYPTO_TWOFISH=y CONFIG_CRYPTO_DEFLATE=y diff --git a/arch/arm/configs/mx1_defconfig b/arch/arm/configs/mx1_defconfig index b39b5ce..c9436d0 100644 --- a/arch/arm/configs/mx1_defconfig +++ b/arch/arm/configs/mx1_defconfig @@ -15,6 +15,7 @@ CONFIG_ARCH_MXC=y CONFIG_ARCH_MX1=y CONFIG_ARCH_MX1ADS=y CONFIG_MACH_SCB9328=y +CONFIG_MACH_APF9328=y CONFIG_MXC_IRQ_PRIOR=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y diff --git a/arch/arm/configs/mx51_defconfig b/arch/arm/configs/mx51_defconfig index e3c9032..0ace16c 100644 --- a/arch/arm/configs/mx51_defconfig +++ b/arch/arm/configs/mx51_defconfig @@ -13,7 +13,7 @@ CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_MXC=y -CONFIG_ARCH_MX5=y +CONFIG_ARCH_MX51=y CONFIG_MACH_MX51_BABBAGE=y CONFIG_MACH_MX51_3DS=y CONFIG_MACH_EUKREA_CPUIMX51=y diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h index 47723e8..78d8068 100644 --- a/arch/arm/mach-davinci/include/mach/uncompress.h +++ b/arch/arm/mach-davinci/include/mach/uncompress.h @@ -25,8 +25,7 @@ #include <mach/serial.h> -static u32 *uart; -static u32 *uart_info = (u32 *)(DAVINCI_UART_INFO); +u32 *uart; /* PORT_16C550A, in polled non-fifo mode */ static void putc(char c) @@ -44,6 +43,8 @@ static inline void flush(void) static inline void set_uart_info(u32 phys, void * __iomem virt) { + u32 *uart_info = (u32 *)(DAVINCI_UART_INFO); + uart = (u32 *)phys; uart_info[0] = phys; uart_info[1] = (u32)virt; diff --git a/arch/arm/mach-davinci/irq.c b/arch/arm/mach-davinci/irq.c index e6269a6..bfe68ec 100644 --- a/arch/arm/mach-davinci/irq.c +++ b/arch/arm/mach-davinci/irq.c @@ -29,8 +29,6 @@ #include <mach/common.h> #include <asm/mach/irq.h> -#define IRQ_BIT(irq) ((irq) & 0x1f) - #define FIQ_REG0_OFFSET 0x0000 #define FIQ_REG1_OFFSET 0x0004 #define IRQ_REG0_OFFSET 0x0008 @@ -42,78 +40,33 @@ #define IRQ_INTPRI0_REG_OFFSET 0x0030 #define IRQ_INTPRI7_REG_OFFSET 0x004C -static inline unsigned int davinci_irq_readl(int offset) -{ - return __raw_readl(davinci_intc_base + offset); -} - static inline void davinci_irq_writel(unsigned long value, int offset) { __raw_writel(value, davinci_intc_base + offset); } -/* Disable interrupt */ -static void davinci_mask_irq(struct irq_data *d) +static __init void +davinci_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num) { - unsigned int mask; - u32 l; - - mask = 1 << IRQ_BIT(d->irq); - - if (d->irq > 31) { - l = davinci_irq_readl(IRQ_ENT_REG1_OFFSET); - l &= ~mask; - davinci_irq_writel(l, IRQ_ENT_REG1_OFFSET); - } else { - l = davinci_irq_readl(IRQ_ENT_REG0_OFFSET); - l &= ~mask; - davinci_irq_writel(l, IRQ_ENT_REG0_OFFSET); - } -} - -/* Enable interrupt */ -static void davinci_unmask_irq(struct irq_data *d) -{ - unsigned int mask; - u32 l; - - mask = 1 << IRQ_BIT(d->irq); - - if (d->irq > 31) { - l = davinci_irq_readl(IRQ_ENT_REG1_OFFSET); - l |= mask; - davinci_irq_writel(l, IRQ_ENT_REG1_OFFSET); - } else { - l = davinci_irq_readl(IRQ_ENT_REG0_OFFSET); - l |= mask; - davinci_irq_writel(l, IRQ_ENT_REG0_OFFSET); - } + struct irq_chip_generic *gc; + struct irq_chip_type *ct; + + gc = irq_alloc_generic_chip("AINTC", 1, irq_start, base, handle_edge_irq); + ct = gc->chip_types; + ct->chip.irq_ack = irq_gc_ack; + ct->chip.irq_mask = irq_gc_mask_clr_bit; + ct->chip.irq_unmask = irq_gc_mask_set_bit; + + ct->regs.ack = IRQ_REG0_OFFSET; + ct->regs.mask = IRQ_ENT_REG0_OFFSET; + irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE, + IRQ_NOREQUEST | IRQ_NOPROBE, 0); } -/* EOI interrupt */ -static void davinci_ack_irq(struct irq_data *d) -{ - unsigned int mask; - - mask = 1 << IRQ_BIT(d->irq); - - if (d->irq > 31) - davinci_irq_writel(mask, IRQ_REG1_OFFSET); - else - davinci_irq_writel(mask, IRQ_REG0_OFFSET); -} - -static struct irq_chip davinci_irq_chip_0 = { - .name = "AINTC", - .irq_ack = davinci_ack_irq, - .irq_mask = davinci_mask_irq, - .irq_unmask = davinci_unmask_irq, -}; - /* ARM Interrupt Controller Initialization */ void __init davinci_irq_init(void) { - unsigned i; + unsigned i, j; const u8 *davinci_def_priorities = davinci_soc_info.intc_irq_prios; davinci_intc_type = DAVINCI_INTC_TYPE_AINTC; @@ -144,7 +97,6 @@ void __init davinci_irq_init(void) davinci_irq_writel(~0x0, IRQ_REG1_OFFSET); for (i = IRQ_INTPRI0_REG_OFFSET; i <= IRQ_INTPRI7_REG_OFFSET; i += 4) { - unsigned j; u32 pri; for (j = 0, pri = 0; j < 32; j += 4, davinci_def_priorities++) @@ -152,13 +104,8 @@ void __init davinci_irq_init(void) davinci_irq_writel(pri, i); } - /* set up genirq dispatch for ARM INTC */ - for (i = 0; i < davinci_soc_info.intc_irq_num; i++) { - irq_set_chip(i, &davinci_irq_chip_0); - set_irq_flags(i, IRQF_VALID | IRQF_PROBE); - if (i != IRQ_TINT1_TINT34) - irq_set_handler(i, handle_edge_irq); - else - irq_set_handler(i, handle_level_irq); - } + for (i = 0, j = 0; i < davinci_soc_info.intc_irq_num; i += 32, j += 0x04) + davinci_alloc_gc(davinci_intc_base + j, i, 32); + + irq_set_handler(IRQ_TINT1_TINT34, handle_level_irq); } diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index e06a88f..5ed51b8 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -16,10 +16,8 @@ #include <linux/serial_8250.h> #include <linux/clk.h> #include <linux/mbus.h> -#include <linux/mv643xx_eth.h> -#include <linux/mv643xx_i2c.h> #include <linux/ata_platform.h> -#include <linux/spi/orion_spi.h> +#include <linux/serial_8250.h> #include <linux/gpio.h> #include <asm/page.h> #include <asm/setup.h> @@ -32,11 +30,12 @@ #include <mach/bridge-regs.h> #include <asm/mach/arch.h> #include <linux/irq.h> -#include <plat/mv_xor.h> -#include <plat/ehci-orion.h> #include <plat/time.h> +#include <plat/common.h> #include "common.h" +static int get_tclk(void); + /***************************************************************************** * I/O Address Mapping ****************************************************************************/ @@ -70,463 +69,106 @@ void __init dove_map_io(void) } /***************************************************************************** - * EHCI - ****************************************************************************/ -static struct orion_ehci_data dove_ehci_data = { - .dram = &dove_mbus_dram_info, - .phy_version = EHCI_PHY_NA, -}; - -static u64 ehci_dmamask = DMA_BIT_MASK(32); - -/***************************************************************************** * EHCI0 ****************************************************************************/ -static struct resource dove_ehci0_resources[] = { - { - .start = DOVE_USB0_PHYS_BASE, - .end = DOVE_USB0_PHYS_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_DOVE_USB0, - .end = IRQ_DOVE_USB0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device dove_ehci0 = { - .name = "orion-ehci", - .id = 0, - .dev = { - .dma_mask = &ehci_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &dove_ehci_data, - }, - .resource = dove_ehci0_resources, - .num_resources = ARRAY_SIZE(dove_ehci0_resources), -}; - void __init dove_ehci0_init(void) { - platform_device_register(&dove_ehci0); + orion_ehci_init(&dove_mbus_dram_info, + DOVE_USB0_PHYS_BASE, IRQ_DOVE_USB0); } /***************************************************************************** * EHCI1 ****************************************************************************/ -static struct resource dove_ehci1_resources[] = { - { - .start = DOVE_USB1_PHYS_BASE, - .end = DOVE_USB1_PHYS_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_DOVE_USB1, - .end = IRQ_DOVE_USB1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device dove_ehci1 = { - .name = "orion-ehci", - .id = 1, - .dev = { - .dma_mask = &ehci_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &dove_ehci_data, - }, - .resource = dove_ehci1_resources, - .num_resources = ARRAY_SIZE(dove_ehci1_resources), -}; - void __init dove_ehci1_init(void) { - platform_device_register(&dove_ehci1); + orion_ehci_1_init(&dove_mbus_dram_info, + DOVE_USB1_PHYS_BASE, IRQ_DOVE_USB1); } /***************************************************************************** * GE00 ****************************************************************************/ -struct mv643xx_eth_shared_platform_data dove_ge00_shared_data = { - .t_clk = 0, - .dram = &dove_mbus_dram_info, -}; - -static struct resource dove_ge00_shared_resources[] = { - { - .name = "ge00 base", - .start = DOVE_GE00_PHYS_BASE + 0x2000, - .end = DOVE_GE00_PHYS_BASE + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device dove_ge00_shared = { - .name = MV643XX_ETH_SHARED_NAME, - .id = 0, - .dev = { - .platform_data = &dove_ge00_shared_data, - }, - .num_resources = 1, - .resource = dove_ge00_shared_resources, -}; - -static struct resource dove_ge00_resources[] = { - { - .name = "ge00 irq", - .start = IRQ_DOVE_GE00_SUM, - .end = IRQ_DOVE_GE00_SUM, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device dove_ge00 = { - .name = MV643XX_ETH_NAME, - .id = 0, - .num_resources = 1, - .resource = dove_ge00_resources, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, -}; - void __init dove_ge00_init(struct mv643xx_eth_platform_data *eth_data) { - eth_data->shared = &dove_ge00_shared; - dove_ge00.dev.platform_data = eth_data; - - platform_device_register(&dove_ge00_shared); - platform_device_register(&dove_ge00); + orion_ge00_init(eth_data, &dove_mbus_dram_info, + DOVE_GE00_PHYS_BASE, IRQ_DOVE_GE00_SUM, + 0, get_tclk()); } /***************************************************************************** * SoC RTC ****************************************************************************/ -static struct resource dove_rtc_resource[] = { - { - .start = DOVE_RTC_PHYS_BASE, - .end = DOVE_RTC_PHYS_BASE + 32 - 1, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_DOVE_RTC, - .flags = IORESOURCE_IRQ, - } -}; - void __init dove_rtc_init(void) { - platform_device_register_simple("rtc-mv", -1, dove_rtc_resource, 2); + orion_rtc_init(DOVE_RTC_PHYS_BASE, IRQ_DOVE_RTC); } /***************************************************************************** * SATA ****************************************************************************/ -static struct resource dove_sata_resources[] = { - { - .name = "sata base", - .start = DOVE_SATA_PHYS_BASE, - .end = DOVE_SATA_PHYS_BASE + 0x5000 - 1, - .flags = IORESOURCE_MEM, - }, { - .name = "sata irq", - .start = IRQ_DOVE_SATA, - .end = IRQ_DOVE_SATA, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device dove_sata = { - .name = "sata_mv", - .id = 0, - .dev = { - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .num_resources = ARRAY_SIZE(dove_sata_resources), - .resource = dove_sata_resources, -}; - void __init dove_sata_init(struct mv_sata_platform_data *sata_data) { - sata_data->dram = &dove_mbus_dram_info; - dove_sata.dev.platform_data = sata_data; - platform_device_register(&dove_sata); + orion_sata_init(sata_data, &dove_mbus_dram_info, + DOVE_SATA_PHYS_BASE, IRQ_DOVE_SATA); + } /***************************************************************************** * UART0 ****************************************************************************/ -static struct plat_serial8250_port dove_uart0_data[] = { - { - .mapbase = DOVE_UART0_PHYS_BASE, - .membase = (char *)DOVE_UART0_VIRT_BASE, - .irq = IRQ_DOVE_UART_0, - .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = 0, - }, { - }, -}; - -static struct resource dove_uart0_resources[] = { - { - .start = DOVE_UART0_PHYS_BASE, - .end = DOVE_UART0_PHYS_BASE + SZ_256 - 1, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_DOVE_UART_0, - .end = IRQ_DOVE_UART_0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device dove_uart0 = { - .name = "serial8250", - .id = 0, - .dev = { - .platform_data = dove_uart0_data, - }, - .resource = dove_uart0_resources, - .num_resources = ARRAY_SIZE(dove_uart0_resources), -}; - void __init dove_uart0_init(void) { - platform_device_register(&dove_uart0); + orion_uart0_init(DOVE_UART0_VIRT_BASE, DOVE_UART0_PHYS_BASE, + IRQ_DOVE_UART_0, get_tclk()); } /***************************************************************************** * UART1 ****************************************************************************/ -static struct plat_serial8250_port dove_uart1_data[] = { - { - .mapbase = DOVE_UART1_PHYS_BASE, - .membase = (char *)DOVE_UART1_VIRT_BASE, - .irq = IRQ_DOVE_UART_1, - .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = 0, - }, { - }, -}; - -static struct resource dove_uart1_resources[] = { - { - .start = DOVE_UART1_PHYS_BASE, - .end = DOVE_UART1_PHYS_BASE + SZ_256 - 1, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_DOVE_UART_1, - .end = IRQ_DOVE_UART_1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device dove_uart1 = { - .name = "serial8250", - .id = 1, - .dev = { - .platform_data = dove_uart1_data, - }, - .resource = dove_uart1_resources, - .num_resources = ARRAY_SIZE(dove_uart1_resources), -}; - void __init dove_uart1_init(void) { - platform_device_register(&dove_uart1); + orion_uart1_init(DOVE_UART1_VIRT_BASE, DOVE_UART1_PHYS_BASE, + IRQ_DOVE_UART_1, get_tclk()); } /***************************************************************************** * UART2 ****************************************************************************/ -static struct plat_serial8250_port dove_uart2_data[] = { - { - .mapbase = DOVE_UART2_PHYS_BASE, - .membase = (char *)DOVE_UART2_VIRT_BASE, - .irq = IRQ_DOVE_UART_2, - .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = 0, - }, { - }, -}; - -static struct resource dove_uart2_resources[] = { - { - .start = DOVE_UART2_PHYS_BASE, - .end = DOVE_UART2_PHYS_BASE + SZ_256 - 1, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_DOVE_UART_2, - .end = IRQ_DOVE_UART_2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device dove_uart2 = { - .name = "serial8250", - .id = 2, - .dev = { - .platform_data = dove_uart2_data, - }, - .resource = dove_uart2_resources, - .num_resources = ARRAY_SIZE(dove_uart2_resources), -}; - void __init dove_uart2_init(void) { - platform_device_register(&dove_uart2); + orion_uart2_init(DOVE_UART2_VIRT_BASE, DOVE_UART2_PHYS_BASE, + IRQ_DOVE_UART_2, get_tclk()); } /***************************************************************************** * UART3 ****************************************************************************/ -static struct plat_serial8250_port dove_uart3_data[] = { - { - .mapbase = DOVE_UART3_PHYS_BASE, - .membase = (char *)DOVE_UART3_VIRT_BASE, - .irq = IRQ_DOVE_UART_3, - .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = 0, - }, { - }, -}; - -static struct resource dove_uart3_resources[] = { - { - .start = DOVE_UART3_PHYS_BASE, - .end = DOVE_UART3_PHYS_BASE + SZ_256 - 1, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_DOVE_UART_3, - .end = IRQ_DOVE_UART_3, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device dove_uart3 = { - .name = "serial8250", - .id = 3, - .dev = { - .platform_data = dove_uart3_data, - }, - .resource = dove_uart3_resources, - .num_resources = ARRAY_SIZE(dove_uart3_resources), -}; - void __init dove_uart3_init(void) { - platform_device_register(&dove_uart3); + orion_uart3_init(DOVE_UART3_VIRT_BASE, DOVE_UART3_PHYS_BASE, + IRQ_DOVE_UART_3, get_tclk()); } /***************************************************************************** - * SPI0 + * SPI ****************************************************************************/ -static struct orion_spi_info dove_spi0_data = { - .tclk = 0, -}; - -static struct resource dove_spi0_resources[] = { - { - .start = DOVE_SPI0_PHYS_BASE, - .end = DOVE_SPI0_PHYS_BASE + SZ_512 - 1, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_DOVE_SPI0, - .end = IRQ_DOVE_SPI0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device dove_spi0 = { - .name = "orion_spi", - .id = 0, - .resource = dove_spi0_resources, - .dev = { - .platform_data = &dove_spi0_data, - }, - .num_resources = ARRAY_SIZE(dove_spi0_resources), -}; - void __init dove_spi0_init(void) { - platform_device_register(&dove_spi0); + orion_spi_init(DOVE_SPI0_PHYS_BASE, get_tclk()); } -/***************************************************************************** - * SPI1 - ****************************************************************************/ -static struct orion_spi_info dove_spi1_data = { - .tclk = 0, -}; - -static struct resource dove_spi1_resources[] = { - { - .start = DOVE_SPI1_PHYS_BASE, - .end = DOVE_SPI1_PHYS_BASE + SZ_512 - 1, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_DOVE_SPI1, - .end = IRQ_DOVE_SPI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device dove_spi1 = { - .name = "orion_spi", - .id = 1, - .resource = dove_spi1_resources, - .dev = { - .platform_data = &dove_spi1_data, - }, - .num_resources = ARRAY_SIZE(dove_spi1_resources), -}; - void __init dove_spi1_init(void) { - platform_device_register(&dove_spi1); + orion_spi_init(DOVE_SPI1_PHYS_BASE, get_tclk()); } /***************************************************************************** * I2C ****************************************************************************/ -static struct mv64xxx_i2c_pdata dove_i2c_data = { - .freq_m = 10, /* assumes 166 MHz TCLK gets 94.3kHz */ - .freq_n = 3, - .timeout = 1000, /* Default timeout of 1 second */ -}; - -static struct resource dove_i2c_resources[] = { - { - .name = "i2c base", - .start = DOVE_I2C_PHYS_BASE, - .end = DOVE_I2C_PHYS_BASE + 0x20 - 1, - .flags = IORESOURCE_MEM, - }, { - .name = "i2c irq", - .start = IRQ_DOVE_I2C, - .end = IRQ_DOVE_I2C, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device dove_i2c = { - .name = MV64XXX_I2C_CTLR_NAME, - .id = 0, - .num_resources = ARRAY_SIZE(dove_i2c_resources), - .resource = dove_i2c_resources, - .dev = { - .platform_data = &dove_i2c_data, - }, -}; - void __init dove_i2c_init(void) { - platform_device_register(&dove_i2c); + orion_i2c_init(DOVE_I2C_PHYS_BASE, IRQ_DOVE_I2C, 10); } /***************************************************************************** @@ -554,208 +196,22 @@ struct sys_timer dove_timer = { }; /***************************************************************************** - * XOR - ****************************************************************************/ -static struct mv_xor_platform_shared_data dove_xor_shared_data = { - .dram = &dove_mbus_dram_info, -}; - -/***************************************************************************** * XOR 0 ****************************************************************************/ -static u64 dove_xor0_dmamask = DMA_BIT_MASK(32); - -static struct resource dove_xor0_shared_resources[] = { - { - .name = "xor 0 low", - .start = DOVE_XOR0_PHYS_BASE, - .end = DOVE_XOR0_PHYS_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, { - .name = "xor 0 high", - .start = DOVE_XOR0_HIGH_PHYS_BASE, - .end = DOVE_XOR0_HIGH_PHYS_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device dove_xor0_shared = { - .name = MV_XOR_SHARED_NAME, - .id = 0, - .dev = { - .platform_data = &dove_xor_shared_data, - }, - .num_resources = ARRAY_SIZE(dove_xor0_shared_resources), - .resource = dove_xor0_shared_resources, -}; - -static struct resource dove_xor00_resources[] = { - [0] = { - .start = IRQ_DOVE_XOR_00, - .end = IRQ_DOVE_XOR_00, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct mv_xor_platform_data dove_xor00_data = { - .shared = &dove_xor0_shared, - .hw_id = 0, - .pool_size = PAGE_SIZE, -}; - -static struct platform_device dove_xor00_channel = { - .name = MV_XOR_NAME, - .id = 0, - .num_resources = ARRAY_SIZE(dove_xor00_resources), - .resource = dove_xor00_resources, - .dev = { - .dma_mask = &dove_xor0_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(64), - .platform_data = &dove_xor00_data, - }, -}; - -static struct resource dove_xor01_resources[] = { - [0] = { - .start = IRQ_DOVE_XOR_01, - .end = IRQ_DOVE_XOR_01, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct mv_xor_platform_data dove_xor01_data = { - .shared = &dove_xor0_shared, - .hw_id = 1, - .pool_size = PAGE_SIZE, -}; - -static struct platform_device dove_xor01_channel = { - .name = MV_XOR_NAME, - .id = 1, - .num_resources = ARRAY_SIZE(dove_xor01_resources), - .resource = dove_xor01_resources, - .dev = { - .dma_mask = &dove_xor0_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(64), - .platform_data = &dove_xor01_data, - }, -}; - void __init dove_xor0_init(void) { - platform_device_register(&dove_xor0_shared); - - /* - * two engines can't do memset simultaneously, this limitation - * satisfied by removing memset support from one of the engines. - */ - dma_cap_set(DMA_MEMCPY, dove_xor00_data.cap_mask); - dma_cap_set(DMA_XOR, dove_xor00_data.cap_mask); - platform_device_register(&dove_xor00_channel); - - dma_cap_set(DMA_MEMCPY, dove_xor01_data.cap_mask); - dma_cap_set(DMA_MEMSET, dove_xor01_data.cap_mask); - dma_cap_set(DMA_XOR, dove_xor01_data.cap_mask); - platform_device_register(&dove_xor01_channel); + orion_xor0_init(&dove_mbus_dram_info, + DOVE_XOR0_PHYS_BASE, DOVE_XOR0_HIGH_PHYS_BASE, + IRQ_DOVE_XOR_00, IRQ_DOVE_XOR_01); } /***************************************************************************** * XOR 1 ****************************************************************************/ -static u64 dove_xor1_dmamask = DMA_BIT_MASK(32); - -static struct resource dove_xor1_shared_resources[] = { - { - .name = "xor 0 low", - .start = DOVE_XOR1_PHYS_BASE, - .end = DOVE_XOR1_PHYS_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, { - .name = "xor 0 high", - .start = DOVE_XOR1_HIGH_PHYS_BASE, - .end = DOVE_XOR1_HIGH_PHYS_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device dove_xor1_shared = { - .name = MV_XOR_SHARED_NAME, - .id = 1, - .dev = { - .platform_data = &dove_xor_shared_data, - }, - .num_resources = ARRAY_SIZE(dove_xor1_shared_resources), - .resource = dove_xor1_shared_resources, -}; - -static struct resource dove_xor10_resources[] = { - [0] = { - .start = IRQ_DOVE_XOR_10, - .end = IRQ_DOVE_XOR_10, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct mv_xor_platform_data dove_xor10_data = { - .shared = &dove_xor1_shared, - .hw_id = 0, - .pool_size = PAGE_SIZE, -}; - -static struct platform_device dove_xor10_channel = { - .name = MV_XOR_NAME, - .id = 2, - .num_resources = ARRAY_SIZE(dove_xor10_resources), - .resource = dove_xor10_resources, - .dev = { - .dma_mask = &dove_xor1_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(64), - .platform_data = &dove_xor10_data, - }, -}; - -static struct resource dove_xor11_resources[] = { - [0] = { - .start = IRQ_DOVE_XOR_11, - .end = IRQ_DOVE_XOR_11, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct mv_xor_platform_data dove_xor11_data = { - .shared = &dove_xor1_shared, - .hw_id = 1, - .pool_size = PAGE_SIZE, -}; - -static struct platform_device dove_xor11_channel = { - .name = MV_XOR_NAME, - .id = 3, - .num_resources = ARRAY_SIZE(dove_xor11_resources), - .resource = dove_xor11_resources, - .dev = { - .dma_mask = &dove_xor1_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(64), - .platform_data = &dove_xor11_data, - }, -}; - void __init dove_xor1_init(void) { - platform_device_register(&dove_xor1_shared); - - /* - * two engines can't do memset simultaneously, this limitation - * satisfied by removing memset support from one of the engines. - */ - dma_cap_set(DMA_MEMCPY, dove_xor10_data.cap_mask); - dma_cap_set(DMA_XOR, dove_xor10_data.cap_mask); - platform_device_register(&dove_xor10_channel); - - dma_cap_set(DMA_MEMCPY, dove_xor11_data.cap_mask); - dma_cap_set(DMA_MEMSET, dove_xor11_data.cap_mask); - dma_cap_set(DMA_XOR, dove_xor11_data.cap_mask); - platform_device_register(&dove_xor11_channel); + orion_xor1_init(DOVE_XOR1_PHYS_BASE, DOVE_XOR1_HIGH_PHYS_BASE, + IRQ_DOVE_XOR_10, IRQ_DOVE_XOR_11); } /***************************************************************************** @@ -833,14 +289,6 @@ void __init dove_init(void) #endif dove_setup_cpu_mbus(); - dove_ge00_shared_data.t_clk = tclk; - dove_uart0_data[0].uartclk = tclk; - dove_uart1_data[0].uartclk = tclk; - dove_uart2_data[0].uartclk = tclk; - dove_uart3_data[0].uartclk = tclk; - dove_spi0_data.tclk = tclk; - dove_spi1_data.tclk = tclk; - /* internal devices that every board has */ dove_rtc_init(); dove_xor0_init(); diff --git a/arch/arm/mach-dove/mpp.c b/arch/arm/mach-dove/mpp.c index c66c763..51e0e41 100644 --- a/arch/arm/mach-dove/mpp.c +++ b/arch/arm/mach-dove/mpp.c @@ -11,24 +11,17 @@ #include <linux/kernel.h> #include <linux/gpio.h> #include <linux/io.h> - +#include <plat/mpp.h> #include <mach/dove.h> - #include "mpp.h" -#define MPP_NR_REGS 4 -#define MPP_CTRL(i) ((i) == 3 ? \ - DOVE_MPP_CTRL4_VIRT_BASE : \ - DOVE_MPP_VIRT_BASE + (i) * 4) -#define PMU_SIG_REGS 2 -#define PMU_SIG_CTRL(i) (DOVE_PMU_SIG_CTRL + (i) * 4) - struct dove_mpp_grp { int start; int end; }; -static struct dove_mpp_grp dove_mpp_grp[] = { +/* Map a group to a range of GPIO pins in that group */ +static const struct dove_mpp_grp dove_mpp_grp[] = { [MPP_24_39] = { .start = 24, .end = 39, @@ -38,8 +31,8 @@ static struct dove_mpp_grp dove_mpp_grp[] = { .end = 45, }, [MPP_46_51] = { - .start = 40, - .end = 45, + .start = 46, + .end = 51, }, [MPP_58_61] = { .start = 58, @@ -51,6 +44,8 @@ static struct dove_mpp_grp dove_mpp_grp[] = { }, }; +/* Enable gpio for a range of pins. mode should be a combination of + GPIO_OUTPUT_OK | GPIO_INPUT_OK */ static void dove_mpp_gpio_mode(int start, int end, int gpio_mode) { int i; @@ -59,24 +54,17 @@ static void dove_mpp_gpio_mode(int start, int end, int gpio_mode) orion_gpio_set_valid(i, gpio_mode); } +/* Dump all the extra MPP registers. The platform code will dump the + registers for pins 0-23. */ static void dove_mpp_dump_regs(void) { -#ifdef DEBUG - int i; + pr_debug("PMU_CTRL4_CTRL: %08x\n", + readl(DOVE_MPP_CTRL4_VIRT_BASE)); - pr_debug("MPP_CTRL regs:"); - for (i = 0; i < MPP_NR_REGS; i++) - printk(" %08x", readl(MPP_CTRL(i))); - printk("\n"); + pr_debug("PMU_MPP_GENERAL_CTRL: %08x\n", + readl(DOVE_PMU_MPP_GENERAL_CTRL)); - pr_debug("PMU_SIG_CTRL regs:"); - for (i = 0; i < PMU_SIG_REGS; i++) - printk(" %08x", readl(PMU_SIG_CTRL(i))); - printk("\n"); - - pr_debug("PMU_MPP_GENERAL_CTRL: %08x\n", readl(DOVE_PMU_MPP_GENERAL_CTRL)); pr_debug("MPP_GENERAL: %08x\n", readl(DOVE_MPP_GENERAL_VIRT_BASE)); -#endif } static void dove_mpp_cfg_nfc(int sel) @@ -92,7 +80,7 @@ static void dove_mpp_cfg_nfc(int sel) static void dove_mpp_cfg_au1(int sel) { - u32 mpp_ctrl4 = readl(DOVE_MPP_CTRL4_VIRT_BASE); + u32 mpp_ctrl4 = readl(DOVE_MPP_CTRL4_VIRT_BASE); u32 ssp_ctrl1 = readl(DOVE_SSP_CTRL_STATUS_1); u32 mpp_gen_ctrl = readl(DOVE_MPP_GENERAL_VIRT_BASE); u32 global_cfg_2 = readl(DOVE_GLOBAL_CONFIG_2); @@ -128,82 +116,46 @@ static void dove_mpp_cfg_au1(int sel) writel(global_cfg_2, DOVE_GLOBAL_CONFIG_2); } -static void dove_mpp_conf_grp(int num, int sel, u32 *mpp_ctrl) -{ - int start = dove_mpp_grp[num].start; - int end = dove_mpp_grp[num].end; - int gpio_mode = sel ? GPIO_OUTPUT_OK | GPIO_INPUT_OK : 0; - - *mpp_ctrl &= ~(0x1 << num); - *mpp_ctrl |= sel << num; - - dove_mpp_gpio_mode(start, end, gpio_mode); -} - -void __init dove_mpp_conf(unsigned int *mpp_list) +/* Configure the group registers, enabling GPIO if sel indicates the + pin is to be used for GPIO */ +static void dove_mpp_conf_grp(unsigned int *mpp_grp_list) { - u32 mpp_ctrl[MPP_NR_REGS]; - u32 pmu_mpp_ctrl = 0; - u32 pmu_sig_ctrl[PMU_SIG_REGS]; - int i; - - for (i = 0; i < MPP_NR_REGS; i++) - mpp_ctrl[i] = readl(MPP_CTRL(i)); - - for (i = 0; i < PMU_SIG_REGS; i++) - pmu_sig_ctrl[i] = readl(PMU_SIG_CTRL(i)); - - pmu_mpp_ctrl = readl(DOVE_PMU_MPP_GENERAL_CTRL); + u32 mpp_ctrl4 = readl(DOVE_MPP_CTRL4_VIRT_BASE); + int gpio_mode; - dove_mpp_dump_regs(); - - for ( ; *mpp_list != MPP_END; mpp_list++) { - unsigned int num = MPP_NUM(*mpp_list); - unsigned int sel = MPP_SEL(*mpp_list); - int shift, gpio_mode; - - if (num > MPP_MAX) { - pr_err("dove: invalid MPP number (%u)\n", num); - continue; - } - - if (*mpp_list & MPP_NFC_MASK) { - dove_mpp_cfg_nfc(sel); - continue; - } + for ( ; *mpp_grp_list; mpp_grp_list++) { + unsigned int num = MPP_NUM(*mpp_grp_list); + unsigned int sel = MPP_SEL(*mpp_grp_list); - if (*mpp_list & MPP_AU1_MASK) { - dove_mpp_cfg_au1(sel); + if (num > MPP_GRP_MAX) { + pr_err("dove: invalid MPP GRP number (%u)\n", num); continue; } - if (*mpp_list & MPP_GRP_MASK) { - dove_mpp_conf_grp(num, sel, &mpp_ctrl[3]); - continue; - } - - shift = (num & 7) << 2; - if (*mpp_list & MPP_PMU_MASK) { - pmu_mpp_ctrl |= (0x1 << num); - pmu_sig_ctrl[num / 8] &= ~(0xf << shift); - pmu_sig_ctrl[num / 8] |= 0xf << shift; - gpio_mode = 0; - } else { - mpp_ctrl[num / 8] &= ~(0xf << shift); - mpp_ctrl[num / 8] |= sel << shift; - gpio_mode = GPIO_OUTPUT_OK | GPIO_INPUT_OK; - } + mpp_ctrl4 &= ~(0x1 << num); + mpp_ctrl4 |= sel << num; - orion_gpio_set_valid(num, gpio_mode); + gpio_mode = sel ? GPIO_OUTPUT_OK | GPIO_INPUT_OK : 0; + dove_mpp_gpio_mode(dove_mpp_grp[num].start, + dove_mpp_grp[num].end, gpio_mode); } + writel(mpp_ctrl4, DOVE_MPP_CTRL4_VIRT_BASE); +} - for (i = 0; i < MPP_NR_REGS; i++) - writel(mpp_ctrl[i], MPP_CTRL(i)); +/* Configure the various MPP pins on Dove */ +void __init dove_mpp_conf(unsigned int *mpp_list, + unsigned int *mpp_grp_list, + unsigned int grp_au1_52_57, + unsigned int grp_nfc_64_71) +{ + dove_mpp_dump_regs(); - for (i = 0; i < PMU_SIG_REGS; i++) - writel(pmu_sig_ctrl[i], PMU_SIG_CTRL(i)); + /* Use platform code for pins 0-23 */ + orion_mpp_conf(mpp_list, 0, MPP_MAX, DOVE_MPP_VIRT_BASE); - writel(pmu_mpp_ctrl, DOVE_PMU_MPP_GENERAL_CTRL); + dove_mpp_conf_grp(mpp_grp_list); + dove_mpp_cfg_au1(grp_au1_52_57); + dove_mpp_cfg_nfc(grp_nfc_64_71); dove_mpp_dump_regs(); } diff --git a/arch/arm/mach-dove/mpp.h b/arch/arm/mach-dove/mpp.h index 2a43ce4..fbec7c5 100644 --- a/arch/arm/mach-dove/mpp.h +++ b/arch/arm/mach-dove/mpp.h @@ -1,178 +1,150 @@ #ifndef __ARCH_DOVE_MPP_CODED_H #define __ARCH_DOVE_MPP_CODED_H -#define MPP(_num, _mode, _pmu, _grp, _au1, _nfc) ( \ -/* MPP/group number */ ((_num) & 0xff) | \ -/* MPP select value */ (((_mode) & 0xf) << 8) | \ -/* MPP PMU */ ((!!(_pmu)) << 12) | \ -/* group flag */ ((!!(_grp)) << 13) | \ -/* AU1 flag */ ((!!(_au1)) << 14) | \ -/* NFCE flag */ ((!!(_nfc)) << 15)) - -#define MPP_MAX 71 - -#define MPP_NUM(x) ((x) & 0xff) -#define MPP_SEL(x) (((x) >> 8) & 0xf) - -#define MPP_PMU_MASK MPP(0, 0x0, 1, 0, 0, 0) -#define MPP_GRP_MASK MPP(0, 0x0, 0, 1, 0, 0) -#define MPP_AU1_MASK MPP(0, 0x0, 0, 0, 1, 0) -#define MPP_NFC_MASK MPP(0, 0x0, 0, 0, 0, 1) - -#define MPP_END MPP(0xff, 0xf, 1, 1, 1, 1) - -#define MPP_PMU_DRIVE_0 0x1 -#define MPP_PMU_DRIVE_1 0x2 -#define MPP_PMU_SDI 0x3 -#define MPP_PMU_CPU_PWRDWN 0x4 -#define MPP_PMU_STBY_PWRDWN 0x5 -#define MPP_PMU_CORE_PWR_GOOD 0x8 -#define MPP_PMU_BAT_FAULT 0xa -#define MPP_PMU_EXT0_WU 0xb -#define MPP_PMU_EXT1_WU 0xc -#define MPP_PMU_EXT2_WU 0xd -#define MPP_PMU_BLINK 0xe -#define MPP_PMU(_num, _mode) MPP((_num), MPP_PMU_##_mode, 1, 0, 0, 0) - -#define MPP_PIN(_num, _mode) MPP((_num), (_mode), 0, 0, 0, 0) -#define MPP_GRP(_grp, _mode) MPP((_grp), (_mode), 0, 1, 0, 0) -#define MPP_GRP_AU1(_mode) MPP(0, (_mode), 0, 0, 1, 0) -#define MPP_GRP_NFC(_mode) MPP(0, (_mode), 0, 0, 0, 1) - -#define MPP0_GPIO0 MPP_PIN(0, 0x0) -#define MPP0_UA2_RTSn MPP_PIN(0, 0x2) -#define MPP0_SDIO0_CD MPP_PIN(0, 0x3) -#define MPP0_LCD0_PWM MPP_PIN(0, 0xf) - -#define MPP1_GPIO1 MPP_PIN(1, 0x0) -#define MPP1_UA2_CTSn MPP_PIN(1, 0x2) -#define MPP1_SDIO0_WP MPP_PIN(1, 0x3) -#define MPP1_LCD1_PWM MPP_PIN(1, 0xf) - -#define MPP2_GPIO2 MPP_PIN(2, 0x0) -#define MPP2_SATA_PRESENT MPP_PIN(2, 0x1) -#define MPP2_UA2_TXD MPP_PIN(2, 0x2) -#define MPP2_SDIO0_BUS_POWER MPP_PIN(2, 0x3) -#define MPP2_UA_RTSn1 MPP_PIN(2, 0x4) - -#define MPP3_GPIO3 MPP_PIN(3, 0x0) -#define MPP3_SATA_ACT MPP_PIN(3, 0x1) -#define MPP3_UA2_RXD MPP_PIN(3, 0x2) -#define MPP3_SDIO0_LED_CTRL MPP_PIN(3, 0x3) -#define MPP3_UA_CTSn1 MPP_PIN(3, 0x4) -#define MPP3_SPI_LCD_CS1 MPP_PIN(3, 0xf) - -#define MPP4_GPIO4 MPP_PIN(4, 0x0) -#define MPP4_UA3_RTSn MPP_PIN(4, 0x2) -#define MPP4_SDIO1_CD MPP_PIN(4, 0x3) -#define MPP4_SPI_1_MISO MPP_PIN(4, 0x4) - -#define MPP5_GPIO5 MPP_PIN(5, 0x0) -#define MPP5_UA3_CTSn MPP_PIN(5, 0x2) -#define MPP5_SDIO1_WP MPP_PIN(5, 0x3) -#define MPP5_SPI_1_CS MPP_PIN(5, 0x4) - -#define MPP6_GPIO6 MPP_PIN(6, 0x0) -#define MPP6_UA3_TXD MPP_PIN(6, 0x2) -#define MPP6_SDIO1_BUS_POWER MPP_PIN(6, 0x3) -#define MPP6_SPI_1_MOSI MPP_PIN(6, 0x4) - -#define MPP7_GPIO7 MPP_PIN(7, 0x0) -#define MPP7_UA3_RXD MPP_PIN(7, 0x2) -#define MPP7_SDIO1_LED_CTRL MPP_PIN(7, 0x3) -#define MPP7_SPI_1_SCK MPP_PIN(7, 0x4) - -#define MPP8_GPIO8 MPP_PIN(8, 0x0) -#define MPP8_WD_RST_OUT MPP_PIN(8, 0x1) - -#define MPP9_GPIO9 MPP_PIN(9, 0x0) -#define MPP9_PEX1_CLKREQn MPP_PIN(9, 0x5) - -#define MPP10_GPIO10 MPP_PIN(10, 0x0) -#define MPP10_SSP_SCLK MPP_PIN(10, 0x5) - -#define MPP11_GPIO11 MPP_PIN(11, 0x0) -#define MPP11_SATA_PRESENT MPP_PIN(11, 0x1) -#define MPP11_SATA_ACT MPP_PIN(11, 0x2) -#define MPP11_SDIO0_LED_CTRL MPP_PIN(11, 0x3) -#define MPP11_SDIO1_LED_CTRL MPP_PIN(11, 0x4) -#define MPP11_PEX0_CLKREQn MPP_PIN(11, 0x5) - -#define MPP12_GPIO12 MPP_PIN(12, 0x0) -#define MPP12_SATA_ACT MPP_PIN(12, 0x1) -#define MPP12_UA2_RTSn MPP_PIN(12, 0x2) -#define MPP12_AD0_I2S_EXT_MCLK MPP_PIN(12, 0x3) -#define MPP12_SDIO1_CD MPP_PIN(12, 0x4) - -#define MPP13_GPIO13 MPP_PIN(13, 0x0) -#define MPP13_UA2_CTSn MPP_PIN(13, 0x2) -#define MPP13_AD1_I2S_EXT_MCLK MPP_PIN(13, 0x3) -#define MPP13_SDIO1WP MPP_PIN(13, 0x4) -#define MPP13_SSP_EXTCLK MPP_PIN(13, 0x5) - -#define MPP14_GPIO14 MPP_PIN(14, 0x0) -#define MPP14_UA2_TXD MPP_PIN(14, 0x2) -#define MPP14_SDIO1_BUS_POWER MPP_PIN(14, 0x4) -#define MPP14_SSP_RXD MPP_PIN(14, 0x5) - -#define MPP15_GPIO15 MPP_PIN(15, 0x0) -#define MPP15_UA2_RXD MPP_PIN(15, 0x2) -#define MPP15_SDIO1_LED_CTRL MPP_PIN(15, 0x4) -#define MPP15_SSP_SFRM MPP_PIN(15, 0x5) - -#define MPP16_GPIO16 MPP_PIN(16, 0x0) -#define MPP16_UA3_RTSn MPP_PIN(16, 0x2) -#define MPP16_SDIO0_CD MPP_PIN(16, 0x3) -#define MPP16_SPI_LCD_CS1 MPP_PIN(16, 0x4) -#define MPP16_AC97_SDATA_IN1 MPP_PIN(16, 0x5) - -#define MPP17_GPIO17 MPP_PIN(17, 0x0) -#define MPP17_AC97_SYSCLK_OUT MPP_PIN(17, 0x1) -#define MPP17_UA3_CTSn MPP_PIN(17, 0x2) -#define MPP17_SDIO0_WP MPP_PIN(17, 0x3) -#define MPP17_TW_SDA2 MPP_PIN(17, 0x4) -#define MPP17_AC97_SDATA_IN2 MPP_PIN(17, 0x5) - -#define MPP18_GPIO18 MPP_PIN(18, 0x0) -#define MPP18_UA3_TXD MPP_PIN(18, 0x2) -#define MPP18_SDIO0_BUS_POWER MPP_PIN(18, 0x3) -#define MPP18_LCD0_PWM MPP_PIN(18, 0x4) -#define MPP18_AC_SDATA_IN3 MPP_PIN(18, 0x5) - -#define MPP19_GPIO19 MPP_PIN(19, 0x0) -#define MPP19_UA3_RXD MPP_PIN(19, 0x2) -#define MPP19_SDIO0_LED_CTRL MPP_PIN(19, 0x3) -#define MPP19_TW_SCK2 MPP_PIN(19, 0x4) - -#define MPP20_GPIO20 MPP_PIN(20, 0x0) -#define MPP20_AC97_SYSCLK_OUT MPP_PIN(20, 0x1) -#define MPP20_SPI_LCD_MISO MPP_PIN(20, 0x2) -#define MPP20_SDIO1_CD MPP_PIN(20, 0x3) -#define MPP20_SDIO0_CD MPP_PIN(20, 0x5) -#define MPP20_SPI_1_MISO MPP_PIN(20, 0x6) - -#define MPP21_GPIO21 MPP_PIN(21, 0x0) -#define MPP21_UA1_RTSn MPP_PIN(21, 0x1) -#define MPP21_SPI_LCD_CS0 MPP_PIN(21, 0x2) -#define MPP21_SDIO1_WP MPP_PIN(21, 0x3) -#define MPP21_SSP_SFRM MPP_PIN(21, 0x4) -#define MPP21_SDIO0_WP MPP_PIN(21, 0x5) -#define MPP21_SPI_1_CS MPP_PIN(21, 0x6) - -#define MPP22_GPIO22 MPP_PIN(22, 0x0) -#define MPP22_UA1_CTSn MPP_PIN(22, 0x1) -#define MPP22_SPI_LCD_MOSI MPP_PIN(22, 0x2) -#define MPP22_SDIO1_BUS_POWER MPP_PIN(22, 0x3) -#define MPP22_SSP_TXD MPP_PIN(22, 0x4) -#define MPP22_SDIO0_BUS_POWER MPP_PIN(22, 0x5) -#define MPP22_SPI_1_MOSI MPP_PIN(22, 0x6) - -#define MPP23_GPIO23 MPP_PIN(23, 0x0) -#define MPP23_SPI_LCD_SCK MPP_PIN(23, 0x2) -#define MPP23_SDIO1_LED_CTRL MPP_PIN(23, 0x3) -#define MPP23_SSP_SCLK MPP_PIN(23, 0x4) -#define MPP23_SDIO0_LED_CTRL MPP_PIN(23, 0x5) -#define MPP23_SPI_1_SCK MPP_PIN(23, 0x6) +#define MPP(_num, _sel, _in, _out) ( \ + /* MPP number */ ((_num) & 0xff) | \ + /* MPP select value */ (((_sel) & 0xf) << 8) | \ + /* may be input signal */ ((!!(_in)) << 12) | \ + /* may be output signal */ ((!!(_out)) << 13)) + +#define MPP0_GPIO0 MPP(0, 0x0, 1, 1) +#define MPP0_UA2_RTSn MPP(0, 0x2, 0, 0) +#define MPP0_SDIO0_CD MPP(0, 0x3, 0, 0) +#define MPP0_LCD0_PWM MPP(0, 0xf, 0, 0) + +#define MPP1_GPIO1 MPP(1, 0x0, 1, 1) +#define MPP1_UA2_CTSn MPP(1, 0x2, 0, 0) +#define MPP1_SDIO0_WP MPP(1, 0x3, 0, 0) +#define MPP1_LCD1_PWM MPP(1, 0xf, 0, 0) + +#define MPP2_GPIO2 MPP(2, 0x0, 1, 1) +#define MPP2_SATA_PRESENT MPP(2, 0x1, 0, 0) +#define MPP2_UA2_TXD MPP(2, 0x2, 0, 0) +#define MPP2_SDIO0_BUS_POWER MPP(2, 0x3, 0, 0) +#define MPP2_UA_RTSn1 MPP(2, 0x4, 0, 0) + +#define MPP3_GPIO3 MPP(3, 0x0, 1, 1) +#define MPP3_SATA_ACT MPP(3, 0x1, 0, 0) +#define MPP3_UA2_RXD MPP(3, 0x2, 0, 0) +#define MPP3_SDIO0_LED_CTRL MPP(3, 0x3, 0, 0) +#define MPP3_UA_CTSn1 MPP(3, 0x4, 0, 0) +#define MPP3_SPI_LCD_CS1 MPP(3, 0xf, 0, 0) + +#define MPP4_GPIO4 MPP(4, 0x0, 1, 1) +#define MPP4_UA3_RTSn MPP(4, 0x2, 0, 0) +#define MPP4_SDIO1_CD MPP(4, 0x3, 0, 0) +#define MPP4_SPI_1_MISO MPP(4, 0x4, 0, 0) + +#define MPP5_GPIO5 MPP(5, 0x0, 1, 1) +#define MPP5_UA3_CTSn MPP(5, 0x2, 0, 0) +#define MPP5_SDIO1_WP MPP(5, 0x3, 0, 0) +#define MPP5_SPI_1_CS MPP(5, 0x4, 0, 0) + +#define MPP6_GPIO6 MPP(6, 0x0, 1, 1) +#define MPP6_UA3_TXD MPP(6, 0x2, 0, 0) +#define MPP6_SDIO1_BUS_POWER MPP(6, 0x3, 0, 0) +#define MPP6_SPI_1_MOSI MPP(6, 0x4, 0, 0) + +#define MPP7_GPIO7 MPP(7, 0x0, 1, 1) +#define MPP7_UA3_RXD MPP(7, 0x2, 0, 0) +#define MPP7_SDIO1_LED_CTRL MPP(7, 0x3, 0, 0) +#define MPP7_SPI_1_SCK MPP(7, 0x4, 0, 0) + +#define MPP8_GPIO8 MPP(8, 0x0, 1, 1) +#define MPP8_WD_RST_OUT MPP(8, 0x1, 0, 0) + +#define MPP9_GPIO9 MPP(9, 0x0, 1, 1) +#define MPP9_PEX1_CLKREQn MPP(9, 0x5, 0, 0) + +#define MPP10_GPIO10 MPP(10, 0x0, 1, 1) +#define MPP10_SSP_SCLK MPP(10, 0x5, 0, 0) + +#define MPP11_GPIO11 MPP(11, 0x0, 1, 1) +#define MPP11_SATA_PRESENT MPP(11, 0x1, 0, 0) +#define MPP11_SATA_ACT MPP(11, 0x2, 0, 0) +#define MPP11_SDIO0_LED_CTRL MPP(11, 0x3, 0, 0) +#define MPP11_SDIO1_LED_CTRL MPP(11, 0x4, 0, 0) +#define MPP11_PEX0_CLKREQn MPP(11, 0x5, 0, 0) + +#define MPP12_GPIO12 MPP(12, 0x0, 1, 1) +#define MPP12_SATA_ACT MPP(12, 0x1, 0, 0) +#define MPP12_UA2_RTSn MPP(12, 0x2, 0, 0) +#define MPP12_AD0_I2S_EXT_MCLK MPP(12, 0x3, 0, 0) +#define MPP12_SDIO1_CD MPP(12, 0x4, 0, 0) + +#define MPP13_GPIO13 MPP(13, 0x0, 1, 1) +#define MPP13_UA2_CTSn MPP(13, 0x2, 0, 0) +#define MPP13_AD1_I2S_EXT_MCLK MPP(13, 0x3, 0, 0) +#define MPP13_SDIO1WP MPP(13, 0x4, 0, 0) +#define MPP13_SSP_EXTCLK MPP(13, 0x5, 0, 0) + +#define MPP14_GPIO14 MPP(14, 0x0, 1, 1) +#define MPP14_UA2_TXD MPP(14, 0x2, 0, 0) +#define MPP14_SDIO1_BUS_POWER MPP(14, 0x4, 0, 0) +#define MPP14_SSP_RXD MPP(14, 0x5, 0, 0) + +#define MPP15_GPIO15 MPP(15, 0x0, 1, 1) +#define MPP15_UA2_RXD MPP(15, 0x2, 0, 0) +#define MPP15_SDIO1_LED_CTRL MPP(15, 0x4, 0, 0) +#define MPP15_SSP_SFRM MPP(15, 0x5, 0, 0) + +#define MPP16_GPIO16 MPP(16, 0x0, 1, 1) +#define MPP16_UA3_RTSn MPP(16, 0x2, 0, 0) +#define MPP16_SDIO0_CD MPP(16, 0x3, 0, 0) +#define MPP16_SPI_LCD_CS1 MPP(16, 0x4, 0, 0) +#define MPP16_AC97_SDATA_IN1 MPP(16, 0x5, 0, 0) + +#define MPP17_GPIO17 MPP(17, 0x0, 1, 1) +#define MPP17_AC97_SYSCLK_OUT MPP(17, 0x1, 0, 0) +#define MPP17_UA3_CTSn MPP(17, 0x2, 0, 0) +#define MPP17_SDIO0_WP MPP(17, 0x3, 0, 0) +#define MPP17_TW_SDA2 MPP(17, 0x4, 0, 0) +#define MPP17_AC97_SDATA_IN2 MPP(17, 0x5, 0, 0) + +#define MPP18_GPIO18 MPP(18, 0x0, 1, 1) +#define MPP18_UA3_TXD MPP(18, 0x2, 0, 0) +#define MPP18_SDIO0_BUS_POWER MPP(18, 0x3, 0, 0) +#define MPP18_LCD0_PWM MPP(18, 0x4, 0, 0) +#define MPP18_AC_SDATA_IN3 MPP(18, 0x5, 0, 0) + +#define MPP19_GPIO19 MPP(19, 0x0, 1, 1) +#define MPP19_UA3_RXD MPP(19, 0x2, 0, 0) +#define MPP19_SDIO0_LED_CTRL MPP(19, 0x3, 0, 0) +#define MPP19_TW_SCK2 MPP(19, 0x4, 0, 0) + +#define MPP20_GPIO20 MPP(20, 0x0, 1, 1) +#define MPP20_AC97_SYSCLK_OUT MPP(20, 0x1, 0, 0) +#define MPP20_SPI_LCD_MISO MPP(20, 0x2, 0, 0) +#define MPP20_SDIO1_CD MPP(20, 0x3, 0, 0) +#define MPP20_SDIO0_CD MPP(20, 0x5, 0, 0) +#define MPP20_SPI_1_MISO MPP(20, 0x6, 0, 0) + +#define MPP21_GPIO21 MPP(21, 0x0, 1, 1) +#define MPP21_UA1_RTSn MPP(21, 0x1, 0, 0) +#define MPP21_SPI_LCD_CS0 MPP(21, 0x2, 0, 0) +#define MPP21_SDIO1_WP MPP(21, 0x3, 0, 0) +#define MPP21_SSP_SFRM MPP(21, 0x4, 0, 0) +#define MPP21_SDIO0_WP MPP(21, 0x5, 0, 0) +#define MPP21_SPI_1_CS MPP(21, 0x6, 0, 0) + +#define MPP22_GPIO22 MPP(22, 0x0, 1, 1) +#define MPP22_UA1_CTSn MPP(22, 0x1, 0, 0) +#define MPP22_SPI_LCD_MOSI MPP(22, 0x2, 0, 0) +#define MPP22_SDIO1_BUS_POWER MPP(22, 0x3, 0, 0) +#define MPP22_SSP_TXD MPP(22, 0x4, 0, 0) +#define MPP22_SDIO0_BUS_POWER MPP(22, 0x5, 0, 0) +#define MPP22_SPI_1_MOSI MPP(22, 0x6, 0, 0) + +#define MPP23_GPIO23 MPP(23, 0x0, 1, 1) +#define MPP23_SPI_LCD_SCK MPP(23, 0x2, 0, 0) +#define MPP23_SDIO1_LED_CTRL MPP(23, 0x3, 0, 0) +#define MPP23_SSP_SCLK MPP(23, 0x4, 0, 0) +#define MPP23_SDIO0_LED_CTRL MPP(23, 0x5, 0, 0) +#define MPP23_SPI_1_SCK MPP(23, 0x6, 0, 0) + +#define MPP_MAX 23 + +#define MPP_GRP(_grp, _mode) MPP((_grp), (_mode), 0, 0) /* for MPP groups _num is a group index */ enum dove_mpp_grp_idx { @@ -181,40 +153,44 @@ enum dove_mpp_grp_idx { MPP_46_51 = 1, MPP_58_61 = 5, MPP_62_63 = 4, + MPP_GRP_MAX = 5, }; -#define MPP24_39_GPIO MPP_GRP(MPP_24_39, 0x1) -#define MPP24_39_CAM MPP_GRP(MPP_24_39, 0x0) +#define MPP_GRP_24_39_GPIO MPP_GRP(MPP_24_39, 0x1) +#define MPP_GRP_24_39_CAM MPP_GRP(MPP_24_39, 0x0) -#define MPP40_45_GPIO MPP_GRP(MPP_40_45, 0x1) -#define MPP40_45_SD0 MPP_GRP(MPP_40_45, 0x0) +#define MPP_GRP_40_45_GPIO MPP_GRP(MPP_40_45, 0x1) +#define MPP_GRP_40_45_SD0 MPP_GRP(MPP_40_45, 0x0) -#define MPP46_51_GPIO MPP_GRP(MPP_46_51, 0x1) -#define MPP46_51_SD1 MPP_GRP(MPP_46_51, 0x0) +#define MPP_GRP_46_51_GPIO MPP_GRP(MPP_46_51, 0x1) +#define MPP_GRP_46_51_SD1 MPP_GRP(MPP_46_51, 0x0) -#define MPP58_61_GPIO MPP_GRP(MPP_58_61, 0x1) -#define MPP58_61_SPI MPP_GRP(MPP_58_61, 0x0) +#define MPP_GRP_58_61_GPIO MPP_GRP(MPP_58_61, 0x1) +#define MPP_GRP_58_61_SPI MPP_GRP(MPP_58_61, 0x0) -#define MPP62_63_GPIO MPP_GRP(MPP_62_63, 0x1) -#define MPP62_63_UA1 MPP_GRP(MPP_62_63, 0x0) +#define MPP_GRP_62_63_GPIO MPP_GRP(MPP_62_63, 0x1) +#define MPP_GRP_62_63_UA1 MPP_GRP(MPP_62_63, 0x0) /* The MPP[64:71] control differs from other groups */ -#define MPP64_71_GPO MPP_GRP_NFC(0x1) -#define MPP64_71_NFC MPP_GRP_NFC(0x0) +#define MPP_GRP_NFC_64_71_GPO 0x1 +#define MPP_GRP_NFC_64_71_NFC 0x0 /* * The MPP[52:57] functionality is encoded by 4 bits in different * registers. The _num field in this case encodes those bits in * correspodence with Table 135 of 88AP510 Functional specification */ -#define MPP52_57_AU1 MPP_GRP_AU1(0x0) -#define MPP52_57_AU1_GPIO57 MPP_GRP_AU1(0x2) -#define MPP52_57_GPIO MPP_GRP_AU1(0xa) -#define MPP52_57_TW_GPIO MPP_GRP_AU1(0xb) -#define MPP52_57_AU1_SSP MPP_GRP_AU1(0xc) -#define MPP52_57_SSP_GPIO MPP_GRP_AU1(0xe) -#define MPP52_57_SSP_TW MPP_GRP_AU1(0xf) - -void dove_mpp_conf(unsigned int *mpp_list); +#define MPP_GRP_AU1_52_57_AU1 0x0 +#define MPP_GRP_AU1_52_57_AU1_GPIO57 0x2 +#define MPP_GRP_AU1_52_57_GPIO 0xa +#define MPP_GRP_AU1_52_57_TW_GPIO 0xb +#define MPP_GRP_AU1_52_57_AU1_SSP 0xc +#define MPP_GRP_AU1_52_57_SSP_GPIO 0xe +#define MPP_GRP_AU1_52_57_SSP_TW 0xf + +void dove_mpp_conf(unsigned int *mpp_list, + unsigned int *mpp_grp_list, + unsigned int grp_au1_52_57, + unsigned int grp_nfc_64_71); #endif /* __ARCH_DOVE_MPP_CODED_H */ diff --git a/arch/arm/mach-exynos4/irq-combiner.c b/arch/arm/mach-exynos4/irq-combiner.c index f488b66..5a2758a 100644 --- a/arch/arm/mach-exynos4/irq-combiner.c +++ b/arch/arm/mach-exynos4/irq-combiner.c @@ -59,8 +59,7 @@ static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc) unsigned int cascade_irq, combiner_irq; unsigned long status; - /* primary controller ack'ing */ - chip->irq_ack(&desc->irq_data); + chained_irq_enter(chip, desc); spin_lock(&irq_controller_lock); status = __raw_readl(chip_data->base + COMBINER_INT_STATUS); @@ -79,8 +78,7 @@ static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc) generic_handle_irq(cascade_irq); out: - /* primary controller unmasking */ - chip->irq_unmask(&desc->irq_data); + chained_irq_exit(chip, desc); } static struct irq_chip combiner_chip = { diff --git a/arch/arm/mach-gemini/include/mach/uncompress.h b/arch/arm/mach-gemini/include/mach/uncompress.h index 5483f61..0efa262 100644 --- a/arch/arm/mach-gemini/include/mach/uncompress.h +++ b/arch/arm/mach-gemini/include/mach/uncompress.h @@ -16,7 +16,7 @@ #include <linux/serial_reg.h> #include <mach/hardware.h> -static volatile unsigned long *UART = (unsigned long *)GEMINI_UART_BASE; +static volatile unsigned long * const UART = (unsigned long *)GEMINI_UART_BASE; /* * The following code assumes the serial port has already been diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 56b930a..59c97a3 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -1,5 +1,15 @@ config IMX_HAVE_DMA_V1 bool +# +# ARCH_MX31 and ARCH_MX35 are left for compatibility +# Some usages assume that having one of them implies not having (e.g.) ARCH_MX2. +# To easily distinguish good and reviewed from unreviewed usages new (and IMHO +# more sensible) names are used: SOC_IMX31 and SOC_IMX35 +config ARCH_MX31 + bool + +config ARCH_MX35 + bool config SOC_IMX1 bool @@ -31,6 +41,24 @@ config SOC_IMX27 select IMX_HAVE_IOMUX_V1 select MXC_AVIC +config SOC_IMX31 + bool + select CPU_V6 + select IMX_HAVE_PLATFORM_MXC_RNGA + select ARCH_MXC_AUDMUX_V2 + select ARCH_MX31 + select MXC_AVIC + +config SOC_IMX35 + bool + select CPU_V6 + select ARCH_MXC_IOMUX_V3 + select ARCH_MXC_AUDMUX_V2 + select HAVE_EPIT + select ARCH_MX35 + select MXC_AVIC + + if ARCH_MX1 comment "MX1 platforms:" @@ -40,6 +68,7 @@ config MACH_MXLADS config ARCH_MX1ADS bool "MX1ADS platform" select MACH_MXLADS + select SOC_IMX1 select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART help @@ -51,6 +80,13 @@ config MACH_SCB9328 help Say Y here if you are using a Synertronixx scb9328 board +config MACH_APF9328 + bool "APF9328" + select SOC_IMX1 + select IMX_HAVE_PLATFORM_IMX_UART + help + Say Yes here if you are using the Armadeus APF9328 development board + endif if ARCH_MX2 @@ -129,6 +165,7 @@ choice config MACH_EUKREA_MBIMXSD25_BASEBOARD bool "Eukrea MBIMXSD development board" + select IMX_HAVE_PLATFORM_GPIO_KEYS select IMX_HAVE_PLATFORM_IMX_SSI help This adds board specific devices that can be found on Eukrea's @@ -254,6 +291,7 @@ config MACH_MX27_3DS config MACH_IMX27_VISSTRIM_M10 bool "Vista Silicon i.MX27 Visstrim_m10" select SOC_IMX27 + select IMX_HAVE_PLATFORM_GPIO_KEYS select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_UART @@ -314,3 +352,251 @@ config MACH_IMX27IPCAM configurations for the board and its peripherals. endif + +if ARCH_MX3 + +comment "MX31 platforms:" + +config MACH_MX31ADS + bool "Support MX31ADS platforms" + select SOC_IMX31 + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_SSI + select IMX_HAVE_PLATFORM_IMX_UART + default y + help + Include support for MX31ADS platform. This includes specific + configurations for the board and its peripherals. + +config MACH_MX31ADS_WM1133_EV1 + bool "Support Wolfson Microelectronics 1133-EV1 module" + depends on MACH_MX31ADS + depends on MFD_WM8350_I2C + depends on REGULATOR_WM8350 + select MFD_WM8350_CONFIG_MODE_0 + select MFD_WM8352_CONFIG_MODE_0 + help + Include support for the Wolfson Microelectronics 1133-EV1 PMU + and audio module for the MX31ADS platform. + +config MACH_MX31LILLY + bool "Support MX31 LILLY-1131 platforms (INCO startec)" + select SOC_IMX31 + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_IPU_CORE + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_MMC + select IMX_HAVE_PLATFORM_SPI_IMX + select MXC_ULPI if USB_ULPI + help + Include support for mx31 based LILLY1131 modules. This includes + specific configurations for the board and its peripherals. + +config MACH_MX31LITE + bool "Support MX31 LITEKIT (LogicPD)" + select SOC_IMX31 + select MXC_ULPI if USB_ULPI + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_MMC + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_MXC_RTC + select IMX_HAVE_PLATFORM_SPI_IMX + help + Include support for MX31 LITEKIT platform. This includes specific + configurations for the board and its peripherals. + +config MACH_PCM037 + bool "Support Phytec pcm037 (i.MX31) platforms" + select SOC_IMX31 + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_IPU_CORE + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_MMC + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_MXC_W1 + select MXC_ULPI if USB_ULPI + help + Include support for Phytec pcm037 platform. This includes + specific configurations for the board and its peripherals. + +config MACH_PCM037_EET + bool "Support pcm037 EET board extensions" + depends on MACH_PCM037 + select IMX_HAVE_PLATFORM_GPIO_KEYS + select IMX_HAVE_PLATFORM_SPI_IMX + help + Add support for PCM037 EET baseboard extensions. If you are using the + OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel + command-line parameter. + +config MACH_MX31_3DS + bool "Support MX31PDK (3DS)" + select SOC_IMX31 + select MXC_DEBUG_BOARD + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_KEYPAD + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_IPU_CORE + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_SPI_IMX + select MXC_ULPI if USB_ULPI + help + Include support for MX31PDK (3DS) platform. This includes specific + configurations for the board and its peripherals. + +config MACH_MX31_3DS_MXC_NAND_USE_BBT + bool "Make the MXC NAND driver use the in flash Bad Block Table" + depends on MACH_MX31_3DS + depends on MTD_NAND_MXC + help + Enable this if you want that the MXC NAND driver uses the in flash + Bad Block Table to know what blocks are bad instead of scanning the + entire flash looking for bad block markers. + +config MACH_MX31MOBOARD + bool "Support mx31moboard platforms (EPFL Mobots group)" + select SOC_IMX31 + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_IPU_CORE + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_MMC + select IMX_HAVE_PLATFORM_SPI_IMX + select MXC_ULPI if USB_ULPI + help + Include support for mx31moboard platform. This includes specific + configurations for the board and its peripherals. + +config MACH_QONG + bool "Support Dave/DENX QongEVB-LITE platform" + select SOC_IMX31 + select IMX_HAVE_PLATFORM_IMX_UART + help + Include support for Dave/DENX QongEVB-LITE platform. This includes + specific configurations for the board and its peripherals. + +config MACH_ARMADILLO5X0 + bool "Support Atmark Armadillo-500 Development Base Board" + select SOC_IMX31 + select IMX_HAVE_PLATFORM_GPIO_KEYS + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_IPU_CORE + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_MMC + select IMX_HAVE_PLATFORM_MXC_NAND + select MXC_ULPI if USB_ULPI + help + Include support for Atmark Armadillo-500 platform. This includes + specific configurations for the board and its peripherals. + +config MACH_KZM_ARM11_01 + bool "Support KZM-ARM11-01(Kyoto Microcomputer)" + select SOC_IMX31 + select IMX_HAVE_PLATFORM_IMX_UART + help + Include support for KZM-ARM11-01. This includes specific + configurations for the board and its peripherals. + +config MACH_BUG + bool "Support Buglabs BUGBase platform" + select SOC_IMX31 + select IMX_HAVE_PLATFORM_IMX_UART + default y + help + Include support for BUGBase 1.3 platform. This includes specific + configurations for the board and its peripherals. + +comment "MX35 platforms:" + +config MACH_PCM043 + bool "Support Phytec pcm043 (i.MX35) platforms" + select SOC_IMX35 + select IMX_HAVE_PLATFORM_FLEXCAN + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_SSI + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_IPU_CORE + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select MXC_ULPI if USB_ULPI + help + Include support for Phytec pcm043 platform. This includes + specific configurations for the board and its peripherals. + +config MACH_MX35_3DS + bool "Support MX35PDK platform" + select SOC_IMX35 + select MXC_DEBUG_BOARD + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + help + Include support for MX35PDK platform. This includes specific + configurations for the board and its peripherals. + +config MACH_EUKREA_CPUIMX35 + bool "Support Eukrea CPUIMX35 Platform" + select SOC_IMX35 + select IMX_HAVE_PLATFORM_FLEXCAN + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select MXC_ULPI if USB_ULPI + help + Include support for Eukrea CPUIMX35 platform. This includes + specific configurations for the board and its peripherals. + +choice + prompt "Baseboard" + depends on MACH_EUKREA_CPUIMX35 + default MACH_EUKREA_MBIMXSD35_BASEBOARD + +config MACH_EUKREA_MBIMXSD35_BASEBOARD + bool "Eukrea MBIMXSD development board" + select IMX_HAVE_PLATFORM_GPIO_KEYS + select IMX_HAVE_PLATFORM_IMX_SSI + select IMX_HAVE_PLATFORM_IPU_CORE + help + This adds board specific devices that can be found on Eukrea's + MBIMXSD evaluation board. + +endchoice + +config MACH_VPR200 + bool "Support VPR200 platform" + select SOC_IMX35 + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_GPIO_KEYS + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IPU_CORE + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + help + Include support for VPR200 platform. This includes specific + configurations for the board and its peripherals. + +endif diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index b85794d..e9eb36d 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -1,9 +1,3 @@ -# -# Makefile for the linux kernel. -# - -# Object file lists. - obj-$(CONFIG_IMX_HAVE_DMA_V1) += dma-v1.o obj-$(CONFIG_ARCH_MX1) += clock-imx1.o mm-imx1.o @@ -14,18 +8,27 @@ obj-$(CONFIG_ARCH_MX25) += clock-imx25.o mm-imx25.o ehci-imx25.o obj-$(CONFIG_MACH_MX27) += cpu-imx27.o pm-imx27.o obj-$(CONFIG_MACH_MX27) += clock-imx27.o mm-imx27.o ehci-imx27.o +obj-$(CONFIG_SOC_IMX31) += mm-imx31.o cpu-imx31.o clock-imx31.o iomux-imx31.o ehci-imx31.o +obj-$(CONFIG_SOC_IMX35) += mm-imx35.o cpu-imx35.o clock-imx35.o ehci-imx35.o +obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o + # Support for CMOS sensor interface -obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o +obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o +# i.MX1 based machines obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o +obj-$(CONFIG_MACH_APF9328) += mach-apf9328.o +# i.MX21 based machines obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o +# i.MX25 based machines obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o obj-$(CONFIG_MACH_EUKREA_CPUIMX25) += mach-eukrea_cpuimx25.o obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd25-baseboard.o +# i.MX27 based machines obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o @@ -37,3 +40,24 @@ obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o obj-$(CONFIG_MACH_PCA100) += mach-pca100.o obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o obj-$(CONFIG_MACH_IMX27IPCAM) += mach-imx27ipcam.o + +# i.MX31 based machines +obj-$(CONFIG_MACH_MX31ADS) += mach-mx31ads.o +obj-$(CONFIG_MACH_MX31LILLY) += mach-mx31lilly.o mx31lilly-db.o +obj-$(CONFIG_MACH_MX31LITE) += mach-mx31lite.o mx31lite-db.o +obj-$(CONFIG_MACH_PCM037) += mach-pcm037.o +obj-$(CONFIG_MACH_PCM037_EET) += mach-pcm037_eet.o +obj-$(CONFIG_MACH_MX31_3DS) += mach-mx31_3ds.o +obj-$(CONFIG_MACH_MX31MOBOARD) += mach-mx31moboard.o mx31moboard-devboard.o \ + mx31moboard-marxbot.o mx31moboard-smartbot.o +obj-$(CONFIG_MACH_QONG) += mach-qong.o +obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o +obj-$(CONFIG_MACH_KZM_ARM11_01) += mach-kzm_arm11_01.o +obj-$(CONFIG_MACH_BUG) += mach-bug.o + +# i.MX35 based machines +obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o +obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o +obj-$(CONFIG_MACH_EUKREA_CPUIMX35) += mach-cpuimx35.o +obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o +obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot index 3953d60..ebee18b 100644 --- a/arch/arm/mach-imx/Makefile.boot +++ b/arch/arm/mach-imx/Makefile.boot @@ -13,3 +13,7 @@ initrd_phys-$(CONFIG_ARCH_MX25) := 0x80800000 zreladdr-$(CONFIG_MACH_MX27) := 0xA0008000 params_phys-$(CONFIG_MACH_MX27) := 0xA0000100 initrd_phys-$(CONFIG_MACH_MX27) := 0xA0800000 + +zreladdr-$(CONFIG_ARCH_MX3) := 0x80008000 +params_phys-$(CONFIG_ARCH_MX3) := 0x80000100 +initrd_phys-$(CONFIG_ARCH_MX3) := 0x80800000 diff --git a/arch/arm/mach-imx/cache-l2x0.c b/arch/arm/mach-imx/cache-l2x0.c new file mode 100644 index 0000000..69d1322 --- /dev/null +++ b/arch/arm/mach-imx/cache-l2x0.c @@ -0,0 +1,56 @@ +/* + * Copyright (C) 2009-2010 Pengutronix + * Sascha Hauer <s.hauer@pengutronix.de> + * Juergen Beisert <j.beisert@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/err.h> +#include <linux/kernel.h> + +#include <asm/hardware/cache-l2x0.h> + +#include <mach/hardware.h> + +static int mxc_init_l2x0(void) +{ + void __iomem *l2x0_base; + void __iomem *clkctl_base; + + if (!cpu_is_mx31() && !cpu_is_mx35()) + return 0; + +/* + * First of all, we must repair broken chip settings. There are some + * i.MX35 CPUs in the wild, comming with bogus L2 cache settings. These + * misconfigured CPUs will run amok immediately when the L2 cache gets enabled. + * Workaraound is to setup the correct register setting prior enabling the + * L2 cache. This should not hurt already working CPUs, as they are using the + * same value. + */ +#define L2_MEM_VAL 0x10 + + clkctl_base = ioremap(MX35_CLKCTL_BASE_ADDR, 4096); + if (clkctl_base != NULL) { + writel(0x00000515, clkctl_base + L2_MEM_VAL); + iounmap(clkctl_base); + } else { + pr_err("L2 cache: Cannot fix timing. Trying to continue without\n"); + } + + l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096); + if (IS_ERR(l2x0_base)) { + printk(KERN_ERR "remapping L2 cache area failed with %ld\n", + PTR_ERR(l2x0_base)); + return 0; + } + + l2x0_init(l2x0_base, 0x00030024, 0x00000000); + + return 0; +} +arch_initcall(mxc_init_l2x0); diff --git a/arch/arm/mach-mx3/clock-imx31.c b/arch/arm/mach-imx/clock-imx31.c index d423cac..25f343f 100644 --- a/arch/arm/mach-mx3/clock-imx31.c +++ b/arch/arm/mach-imx/clock-imx31.c @@ -32,7 +32,7 @@ #include <mach/mx31.h> #include <mach/common.h> -#include "crm_regs.h" +#include "crmregs-imx31.h" #define PRE_DIV_MIN_FREQ 10000000 /* Minimum Frequency after Predivider */ @@ -627,4 +627,3 @@ int __init mx31_clocks_init(unsigned long fref) return 0; } - diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-imx/clock-imx35.c index 448a038..5a4cc1e 100644 --- a/arch/arm/mach-mx3/clock-imx35.c +++ b/arch/arm/mach-imx/clock-imx35.c @@ -547,4 +547,3 @@ int __init mx35_clocks_init() return 0; } - diff --git a/arch/arm/mach-mx3/cpu.c b/arch/arm/mach-imx/cpu-imx31.c index d1d3395..a378070 100644 --- a/arch/arm/mach-mx3/cpu.c +++ b/arch/arm/mach-imx/cpu-imx31.c @@ -1,5 +1,5 @@ /* - * MX3 CPU type detection + * MX31 CPU type detection * * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> * @@ -17,14 +17,12 @@ unsigned int mx31_cpu_rev; EXPORT_SYMBOL(mx31_cpu_rev); -struct mx3_cpu_type { +static struct { u8 srev; const char *name; const char *v; unsigned int rev; -}; - -static struct mx3_cpu_type mx31_cpu_type[] __initdata = { +} mx31_cpu_type[] __initdata = { { .srev = 0x00, .name = "i.MX31(L)", .v = "1.0", .rev = IMX_CHIP_REVISION_1_0 }, { .srev = 0x10, .name = "i.MX31", .v = "1.1", .rev = IMX_CHIP_REVISION_1_1 }, { .srev = 0x11, .name = "i.MX31L", .v = "1.1", .rev = IMX_CHIP_REVISION_1_1 }, @@ -57,33 +55,3 @@ void __init mx31_read_cpu_rev(void) printk(KERN_WARNING "Unknown CPU identifier. srev = %02x\n", srev); } - -unsigned int mx35_cpu_rev; -EXPORT_SYMBOL(mx35_cpu_rev); - -void __init mx35_read_cpu_rev(void) -{ - u32 rev; - char *srev; - - rev = __raw_readl(MX35_IO_ADDRESS(MX35_IIM_BASE_ADDR + MXC_IIMSREV)); - switch (rev) { - case 0x00: - mx35_cpu_rev = IMX_CHIP_REVISION_1_0; - srev = "1.0"; - break; - case 0x10: - mx35_cpu_rev = IMX_CHIP_REVISION_2_0; - srev = "2.0"; - break; - case 0x11: - mx35_cpu_rev = IMX_CHIP_REVISION_2_1; - srev = "2.1"; - break; - default: - mx35_cpu_rev = IMX_CHIP_REVISION_UNKNOWN; - srev = "unknown"; - } - - printk(KERN_INFO "CPU identified as i.MX35, silicon rev %s\n", srev); -} diff --git a/arch/arm/mach-imx/cpu-imx35.c b/arch/arm/mach-imx/cpu-imx35.c new file mode 100644 index 0000000..6637cd8 --- /dev/null +++ b/arch/arm/mach-imx/cpu-imx35.c @@ -0,0 +1,44 @@ +/* + * MX35 CPU type detection + * + * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#include <linux/module.h> +#include <linux/io.h> +#include <mach/hardware.h> +#include <mach/iim.h> + +unsigned int mx35_cpu_rev; +EXPORT_SYMBOL(mx35_cpu_rev); + +void __init mx35_read_cpu_rev(void) +{ + u32 rev; + char *srev; + + rev = __raw_readl(MX35_IO_ADDRESS(MX35_IIM_BASE_ADDR + MXC_IIMSREV)); + switch (rev) { + case 0x00: + mx35_cpu_rev = IMX_CHIP_REVISION_1_0; + srev = "1.0"; + break; + case 0x10: + mx35_cpu_rev = IMX_CHIP_REVISION_2_0; + srev = "2.0"; + break; + case 0x11: + mx35_cpu_rev = IMX_CHIP_REVISION_2_1; + srev = "2.1"; + break; + default: + mx35_cpu_rev = IMX_CHIP_REVISION_UNKNOWN; + srev = "unknown"; + } + + printk(KERN_INFO "CPU identified as i.MX35, silicon rev %s\n", srev); +} diff --git a/arch/arm/mach-mx3/crm_regs.h b/arch/arm/mach-imx/crmregs-imx31.h index 37a8a07..37a8a07 100644 --- a/arch/arm/mach-mx3/crm_regs.h +++ b/arch/arm/mach-imx/crmregs-imx31.h diff --git a/arch/arm/mach-imx/devices-imx1.h b/arch/arm/mach-imx/devices-imx1.h index da59365..3aad1e7 100644 --- a/arch/arm/mach-imx/devices-imx1.h +++ b/arch/arm/mach-imx/devices-imx1.h @@ -9,21 +9,21 @@ #include <mach/mx1.h> #include <mach/devices-common.h> -extern const struct imx_imx_fb_data imx1_imx_fb_data __initconst; +extern const struct imx_imx_fb_data imx1_imx_fb_data; #define imx1_add_imx_fb(pdata) \ imx_add_imx_fb(&imx1_imx_fb_data, pdata) -extern const struct imx_imx_i2c_data imx1_imx_i2c_data __initconst; +extern const struct imx_imx_i2c_data imx1_imx_i2c_data; #define imx1_add_imx_i2c(pdata) \ imx_add_imx_i2c(&imx1_imx_i2c_data, pdata) -extern const struct imx_imx_uart_3irq_data imx1_imx_uart_data[] __initconst; +extern const struct imx_imx_uart_3irq_data imx1_imx_uart_data[]; #define imx1_add_imx_uart(id, pdata) \ imx_add_imx_uart_3irq(&imx1_imx_uart_data[id], pdata) #define imx1_add_imx_uart0(pdata) imx1_add_imx_uart(0, pdata) #define imx1_add_imx_uart1(pdata) imx1_add_imx_uart(1, pdata) -extern const struct imx_spi_imx_data imx1_cspi_data[] __initconst; +extern const struct imx_spi_imx_data imx1_cspi_data[]; #define imx1_add_cspi(id, pdata) \ imx_add_spi_imx(&imx1_cspi_data[id], pdata) diff --git a/arch/arm/mach-imx/devices-imx21.h b/arch/arm/mach-imx/devices-imx21.h index 16744d2..2628e0c 100644 --- a/arch/arm/mach-imx/devices-imx21.h +++ b/arch/arm/mach-imx/devices-imx21.h @@ -9,31 +9,31 @@ #include <mach/mx21.h> #include <mach/devices-common.h> -extern const struct imx_imx21_hcd_data imx21_imx21_hcd_data __initconst; +extern const struct imx_imx21_hcd_data imx21_imx21_hcd_data; #define imx21_add_imx21_hcd(pdata) \ imx_add_imx21_hcd(&imx21_imx21_hcd_data, pdata) -extern const struct imx_imx2_wdt_data imx21_imx2_wdt_data __initconst; +extern const struct imx_imx2_wdt_data imx21_imx2_wdt_data; #define imx21_add_imx2_wdt(pdata) \ imx_add_imx2_wdt(&imx21_imx2_wdt_data) -extern const struct imx_imx_fb_data imx21_imx_fb_data __initconst; +extern const struct imx_imx_fb_data imx21_imx_fb_data; #define imx21_add_imx_fb(pdata) \ imx_add_imx_fb(&imx21_imx_fb_data, pdata) -extern const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst; +extern const struct imx_imx_i2c_data imx21_imx_i2c_data; #define imx21_add_imx_i2c(pdata) \ imx_add_imx_i2c(&imx21_imx_i2c_data, pdata) -extern const struct imx_imx_keypad_data imx21_imx_keypad_data __initconst; +extern const struct imx_imx_keypad_data imx21_imx_keypad_data; #define imx21_add_imx_keypad(pdata) \ imx_add_imx_keypad(&imx21_imx_keypad_data, pdata) -extern const struct imx_imx_ssi_data imx21_imx_ssi_data[] __initconst; +extern const struct imx_imx_ssi_data imx21_imx_ssi_data[]; #define imx21_add_imx_ssi(id, pdata) \ imx_add_imx_ssi(&imx21_imx_ssi_data[id], pdata) -extern const struct imx_imx_uart_1irq_data imx21_imx_uart_data[] __initconst; +extern const struct imx_imx_uart_1irq_data imx21_imx_uart_data[]; #define imx21_add_imx_uart(id, pdata) \ imx_add_imx_uart_1irq(&imx21_imx_uart_data[id], pdata) #define imx21_add_imx_uart0(pdata) imx21_add_imx_uart(0, pdata) @@ -41,19 +41,19 @@ extern const struct imx_imx_uart_1irq_data imx21_imx_uart_data[] __initconst; #define imx21_add_imx_uart2(pdata) imx21_add_imx_uart(2, pdata) #define imx21_add_imx_uart3(pdata) imx21_add_imx_uart(3, pdata) -extern const struct imx_mxc_mmc_data imx21_mxc_mmc_data[] __initconst; +extern const struct imx_mxc_mmc_data imx21_mxc_mmc_data[]; #define imx21_add_mxc_mmc(id, pdata) \ imx_add_mxc_mmc(&imx21_mxc_mmc_data[id], pdata) -extern const struct imx_mxc_nand_data imx21_mxc_nand_data __initconst; +extern const struct imx_mxc_nand_data imx21_mxc_nand_data; #define imx21_add_mxc_nand(pdata) \ imx_add_mxc_nand(&imx21_mxc_nand_data, pdata) -extern const struct imx_mxc_w1_data imx21_mxc_w1_data __initconst; +extern const struct imx_mxc_w1_data imx21_mxc_w1_data; #define imx21_add_mxc_w1(pdata) \ imx_add_mxc_w1(&imx21_mxc_w1_data) -extern const struct imx_spi_imx_data imx21_cspi_data[] __initconst; +extern const struct imx_spi_imx_data imx21_cspi_data[]; #define imx21_add_cspi(id, pdata) \ imx_add_spi_imx(&imx21_cspi_data[id], pdata) #define imx21_add_spi_imx0(pdata) imx21_add_cspi(0, pdata) diff --git a/arch/arm/mach-imx/devices-imx25.h b/arch/arm/mach-imx/devices-imx25.h index b591d72..efa0761 100644 --- a/arch/arm/mach-imx/devices-imx25.h +++ b/arch/arm/mach-imx/devices-imx25.h @@ -9,48 +9,48 @@ #include <mach/mx25.h> #include <mach/devices-common.h> -extern const struct imx_fec_data imx25_fec_data __initconst; +extern const struct imx_fec_data imx25_fec_data; #define imx25_add_fec(pdata) \ imx_add_fec(&imx25_fec_data, pdata) -extern const struct imx_flexcan_data imx25_flexcan_data[] __initconst; +extern const struct imx_flexcan_data imx25_flexcan_data[]; #define imx25_add_flexcan(id, pdata) \ imx_add_flexcan(&imx25_flexcan_data[id], pdata) #define imx25_add_flexcan0(pdata) imx25_add_flexcan(0, pdata) #define imx25_add_flexcan1(pdata) imx25_add_flexcan(1, pdata) -extern const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data __initconst; +extern const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data; #define imx25_add_fsl_usb2_udc(pdata) \ imx_add_fsl_usb2_udc(&imx25_fsl_usb2_udc_data, pdata) -extern struct imx_imxdi_rtc_data imx25_imxdi_rtc_data __initconst; +extern struct imx_imxdi_rtc_data imx25_imxdi_rtc_data; #define imx25_add_imxdi_rtc(pdata) \ imx_add_imxdi_rtc(&imx25_imxdi_rtc_data) -extern const struct imx_imx2_wdt_data imx25_imx2_wdt_data __initconst; +extern const struct imx_imx2_wdt_data imx25_imx2_wdt_data; #define imx25_add_imx2_wdt(pdata) \ imx_add_imx2_wdt(&imx25_imx2_wdt_data) -extern const struct imx_imx_fb_data imx25_imx_fb_data __initconst; +extern const struct imx_imx_fb_data imx25_imx_fb_data; #define imx25_add_imx_fb(pdata) \ imx_add_imx_fb(&imx25_imx_fb_data, pdata) -extern const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst; +extern const struct imx_imx_i2c_data imx25_imx_i2c_data[]; #define imx25_add_imx_i2c(id, pdata) \ imx_add_imx_i2c(&imx25_imx_i2c_data[id], pdata) #define imx25_add_imx_i2c0(pdata) imx25_add_imx_i2c(0, pdata) #define imx25_add_imx_i2c1(pdata) imx25_add_imx_i2c(1, pdata) #define imx25_add_imx_i2c2(pdata) imx25_add_imx_i2c(2, pdata) -extern const struct imx_imx_keypad_data imx25_imx_keypad_data __initconst; +extern const struct imx_imx_keypad_data imx25_imx_keypad_data; #define imx25_add_imx_keypad(pdata) \ imx_add_imx_keypad(&imx25_imx_keypad_data, pdata) -extern const struct imx_imx_ssi_data imx25_imx_ssi_data[] __initconst; +extern const struct imx_imx_ssi_data imx25_imx_ssi_data[]; #define imx25_add_imx_ssi(id, pdata) \ imx_add_imx_ssi(&imx25_imx_ssi_data[id], pdata) -extern const struct imx_imx_uart_1irq_data imx25_imx_uart_data[] __initconst; +extern const struct imx_imx_uart_1irq_data imx25_imx_uart_data[]; #define imx25_add_imx_uart(id, pdata) \ imx_add_imx_uart_1irq(&imx25_imx_uart_data[id], pdata) #define imx25_add_imx_uart0(pdata) imx25_add_imx_uart(0, pdata) @@ -59,33 +59,32 @@ extern const struct imx_imx_uart_1irq_data imx25_imx_uart_data[] __initconst; #define imx25_add_imx_uart3(pdata) imx25_add_imx_uart(3, pdata) #define imx25_add_imx_uart4(pdata) imx25_add_imx_uart(4, pdata) -extern const struct imx_mx2_camera_data imx25_mx2_camera_data __initconst; +extern const struct imx_mx2_camera_data imx25_mx2_camera_data; #define imx25_add_mx2_camera(pdata) \ imx_add_mx2_camera(&imx25_mx2_camera_data, pdata) -extern const struct imx_mxc_ehci_data imx25_mxc_ehci_otg_data __initconst; +extern const struct imx_mxc_ehci_data imx25_mxc_ehci_otg_data; #define imx25_add_mxc_ehci_otg(pdata) \ imx_add_mxc_ehci(&imx25_mxc_ehci_otg_data, pdata) -extern const struct imx_mxc_ehci_data imx25_mxc_ehci_hs_data __initconst; +extern const struct imx_mxc_ehci_data imx25_mxc_ehci_hs_data; #define imx25_add_mxc_ehci_hs(pdata) \ imx_add_mxc_ehci(&imx25_mxc_ehci_hs_data, pdata) -extern const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst; +extern const struct imx_mxc_nand_data imx25_mxc_nand_data; #define imx25_add_mxc_nand(pdata) \ imx_add_mxc_nand(&imx25_mxc_nand_data, pdata) -extern const struct imx_sdhci_esdhc_imx_data -imx25_sdhci_esdhc_imx_data[] __initconst; +extern const struct imx_sdhci_esdhc_imx_data imx25_sdhci_esdhc_imx_data[]; #define imx25_add_sdhci_esdhc_imx(id, pdata) \ imx_add_sdhci_esdhc_imx(&imx25_sdhci_esdhc_imx_data[id], pdata) -extern const struct imx_spi_imx_data imx25_cspi_data[] __initconst; +extern const struct imx_spi_imx_data imx25_cspi_data[]; #define imx25_add_spi_imx(id, pdata) \ imx_add_spi_imx(&imx25_cspi_data[id], pdata) #define imx25_add_spi_imx0(pdata) imx25_add_spi_imx(0, pdata) #define imx25_add_spi_imx1(pdata) imx25_add_spi_imx(1, pdata) #define imx25_add_spi_imx2(pdata) imx25_add_spi_imx(2, pdata) -extern struct imx_mxc_pwm_data imx25_mxc_pwm_data[] __initconst; +extern struct imx_mxc_pwm_data imx25_mxc_pwm_data[]; #define imx25_add_mxc_pwm(id) \ imx_add_mxc_pwm(&imx25_mxc_pwm_data[id]) diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h index f1272d4..7f97a3c 100644 --- a/arch/arm/mach-imx/devices-imx27.h +++ b/arch/arm/mach-imx/devices-imx27.h @@ -9,35 +9,35 @@ #include <mach/mx27.h> #include <mach/devices-common.h> -extern const struct imx_fec_data imx27_fec_data __initconst; +extern const struct imx_fec_data imx27_fec_data; #define imx27_add_fec(pdata) \ imx_add_fec(&imx27_fec_data, pdata) -extern const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst; +extern const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data; #define imx27_add_fsl_usb2_udc(pdata) \ imx_add_fsl_usb2_udc(&imx27_fsl_usb2_udc_data, pdata) -extern const struct imx_imx2_wdt_data imx27_imx2_wdt_data __initconst; +extern const struct imx_imx2_wdt_data imx27_imx2_wdt_data; #define imx27_add_imx2_wdt(pdata) \ imx_add_imx2_wdt(&imx27_imx2_wdt_data) -extern const struct imx_imx_fb_data imx27_imx_fb_data __initconst; +extern const struct imx_imx_fb_data imx27_imx_fb_data; #define imx27_add_imx_fb(pdata) \ imx_add_imx_fb(&imx27_imx_fb_data, pdata) -extern const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst; +extern const struct imx_imx_i2c_data imx27_imx_i2c_data[]; #define imx27_add_imx_i2c(id, pdata) \ imx_add_imx_i2c(&imx27_imx_i2c_data[id], pdata) -extern const struct imx_imx_keypad_data imx27_imx_keypad_data __initconst; +extern const struct imx_imx_keypad_data imx27_imx_keypad_data; #define imx27_add_imx_keypad(pdata) \ imx_add_imx_keypad(&imx27_imx_keypad_data, pdata) -extern const struct imx_imx_ssi_data imx27_imx_ssi_data[] __initconst; +extern const struct imx_imx_ssi_data imx27_imx_ssi_data[]; #define imx27_add_imx_ssi(id, pdata) \ imx_add_imx_ssi(&imx27_imx_ssi_data[id], pdata) -extern const struct imx_imx_uart_1irq_data imx27_imx_uart_data[] __initconst; +extern const struct imx_imx_uart_1irq_data imx27_imx_uart_data[]; #define imx27_add_imx_uart(id, pdata) \ imx_add_imx_uart_1irq(&imx27_imx_uart_data[id], pdata) #define imx27_add_imx_uart0(pdata) imx27_add_imx_uart(0, pdata) @@ -47,30 +47,30 @@ extern const struct imx_imx_uart_1irq_data imx27_imx_uart_data[] __initconst; #define imx27_add_imx_uart4(pdata) imx27_add_imx_uart(4, pdata) #define imx27_add_imx_uart5(pdata) imx27_add_imx_uart(5, pdata) -extern const struct imx_mx2_camera_data imx27_mx2_camera_data __initconst; +extern const struct imx_mx2_camera_data imx27_mx2_camera_data; #define imx27_add_mx2_camera(pdata) \ imx_add_mx2_camera(&imx27_mx2_camera_data, pdata) -extern const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data __initconst; +extern const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data; #define imx27_add_mxc_ehci_otg(pdata) \ imx_add_mxc_ehci(&imx27_mxc_ehci_otg_data, pdata) -extern const struct imx_mxc_ehci_data imx27_mxc_ehci_hs_data[] __initconst; +extern const struct imx_mxc_ehci_data imx27_mxc_ehci_hs_data[]; #define imx27_add_mxc_ehci_hs(id, pdata) \ imx_add_mxc_ehci(&imx27_mxc_ehci_hs_data[id - 1], pdata) -extern const struct imx_mxc_mmc_data imx27_mxc_mmc_data[] __initconst; +extern const struct imx_mxc_mmc_data imx27_mxc_mmc_data[]; #define imx27_add_mxc_mmc(id, pdata) \ imx_add_mxc_mmc(&imx27_mxc_mmc_data[id], pdata) -extern const struct imx_mxc_nand_data imx27_mxc_nand_data __initconst; +extern const struct imx_mxc_nand_data imx27_mxc_nand_data; #define imx27_add_mxc_nand(pdata) \ imx_add_mxc_nand(&imx27_mxc_nand_data, pdata) -extern const struct imx_mxc_w1_data imx27_mxc_w1_data __initconst; +extern const struct imx_mxc_w1_data imx27_mxc_w1_data; #define imx27_add_mxc_w1(pdata) \ imx_add_mxc_w1(&imx27_mxc_w1_data) -extern const struct imx_spi_imx_data imx27_cspi_data[] __initconst; +extern const struct imx_spi_imx_data imx27_cspi_data[]; #define imx27_add_cspi(id, pdata) \ imx_add_spi_imx(&imx27_cspi_data[id], pdata) #define imx27_add_spi_imx0(pdata) imx27_add_cspi(0, pdata) diff --git a/arch/arm/mach-mx3/devices-imx31.h b/arch/arm/mach-imx/devices-imx31.h index 40f4e84..dbe940d 100644 --- a/arch/arm/mach-mx3/devices-imx31.h +++ b/arch/arm/mach-imx/devices-imx31.h @@ -9,30 +9,30 @@ #include <mach/mx31.h> #include <mach/devices-common.h> -extern const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data __initconst; +extern const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data; #define imx31_add_fsl_usb2_udc(pdata) \ imx_add_fsl_usb2_udc(&imx31_fsl_usb2_udc_data, pdata) -extern const struct imx_imx2_wdt_data imx31_imx2_wdt_data __initconst; +extern const struct imx_imx2_wdt_data imx31_imx2_wdt_data; #define imx31_add_imx2_wdt(pdata) \ imx_add_imx2_wdt(&imx31_imx2_wdt_data) -extern const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst; +extern const struct imx_imx_i2c_data imx31_imx_i2c_data[]; #define imx31_add_imx_i2c(id, pdata) \ imx_add_imx_i2c(&imx31_imx_i2c_data[id], pdata) #define imx31_add_imx_i2c0(pdata) imx31_add_imx_i2c(0, pdata) #define imx31_add_imx_i2c1(pdata) imx31_add_imx_i2c(1, pdata) #define imx31_add_imx_i2c2(pdata) imx31_add_imx_i2c(2, pdata) -extern const struct imx_imx_keypad_data imx31_imx_keypad_data __initconst; +extern const struct imx_imx_keypad_data imx31_imx_keypad_data; #define imx31_add_imx_keypad(pdata) \ imx_add_imx_keypad(&imx31_imx_keypad_data, pdata) -extern const struct imx_imx_ssi_data imx31_imx_ssi_data[] __initconst; +extern const struct imx_imx_ssi_data imx31_imx_ssi_data[]; #define imx31_add_imx_ssi(id, pdata) \ imx_add_imx_ssi(&imx31_imx_ssi_data[id], pdata) -extern const struct imx_imx_uart_1irq_data imx31_imx_uart_data[] __initconst; +extern const struct imx_imx_uart_1irq_data imx31_imx_uart_data[]; #define imx31_add_imx_uart(id, pdata) \ imx_add_imx_uart_1irq(&imx31_imx_uart_data[id], pdata) #define imx31_add_imx_uart0(pdata) imx31_add_imx_uart(0, pdata) @@ -41,26 +41,38 @@ extern const struct imx_imx_uart_1irq_data imx31_imx_uart_data[] __initconst; #define imx31_add_imx_uart3(pdata) imx31_add_imx_uart(3, pdata) #define imx31_add_imx_uart4(pdata) imx31_add_imx_uart(4, pdata) -extern const struct imx_mxc_ehci_data imx31_mxc_ehci_otg_data __initconst; +extern const struct imx_ipu_core_data imx31_ipu_core_data; +#define imx31_add_ipu_core(pdata) \ + imx_add_ipu_core(&imx31_ipu_core_data, pdata) +#define imx31_alloc_mx3_camera(pdata) \ + imx_alloc_mx3_camera(&imx31_ipu_core_data, pdata) +#define imx31_add_mx3_sdc_fb(pdata) \ + imx_add_mx3_sdc_fb(&imx31_ipu_core_data, pdata) + +extern const struct imx_mxc_ehci_data imx31_mxc_ehci_otg_data; #define imx31_add_mxc_ehci_otg(pdata) \ imx_add_mxc_ehci(&imx31_mxc_ehci_otg_data, pdata) -extern const struct imx_mxc_ehci_data imx31_mxc_ehci_hs_data[] __initconst; +extern const struct imx_mxc_ehci_data imx31_mxc_ehci_hs_data[]; #define imx31_add_mxc_ehci_hs(id, pdata) \ imx_add_mxc_ehci(&imx31_mxc_ehci_hs_data[id - 1], pdata) -extern const struct imx_mxc_mmc_data imx31_mxc_mmc_data[] __initconst; +extern const struct imx_mxc_mmc_data imx31_mxc_mmc_data[]; #define imx31_add_mxc_mmc(id, pdata) \ imx_add_mxc_mmc(&imx31_mxc_mmc_data[id], pdata) -extern const struct imx_mxc_nand_data imx31_mxc_nand_data __initconst; +extern const struct imx_mxc_nand_data imx31_mxc_nand_data; #define imx31_add_mxc_nand(pdata) \ imx_add_mxc_nand(&imx31_mxc_nand_data, pdata) -extern const struct imx_mxc_w1_data imx31_mxc_w1_data __initconst; +extern const struct imx_mxc_rtc_data imx31_mxc_rtc_data; +#define imx31_add_mxc_rtc(pdata) \ + imx_add_mxc_rtc(&imx31_mxc_rtc_data) + +extern const struct imx_mxc_w1_data imx31_mxc_w1_data; #define imx31_add_mxc_w1(pdata) \ imx_add_mxc_w1(&imx31_mxc_w1_data) -extern const struct imx_spi_imx_data imx31_cspi_data[] __initconst; +extern const struct imx_spi_imx_data imx31_cspi_data[]; #define imx31_add_cspi(id, pdata) \ imx_add_spi_imx(&imx31_cspi_data[id], pdata) #define imx31_add_spi_imx0(pdata) imx31_add_cspi(0, pdata) diff --git a/arch/arm/mach-mx3/devices-imx35.h b/arch/arm/mach-imx/devices-imx35.h index d545d86..234cbd3 100644 --- a/arch/arm/mach-mx3/devices-imx35.h +++ b/arch/arm/mach-imx/devices-imx35.h @@ -9,67 +9,74 @@ #include <mach/mx35.h> #include <mach/devices-common.h> -extern const struct imx_fec_data imx35_fec_data __initconst; +extern const struct imx_fec_data imx35_fec_data; #define imx35_add_fec(pdata) \ imx_add_fec(&imx35_fec_data, pdata) -extern const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data __initconst; +extern const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data; #define imx35_add_fsl_usb2_udc(pdata) \ imx_add_fsl_usb2_udc(&imx35_fsl_usb2_udc_data, pdata) -extern const struct imx_flexcan_data imx35_flexcan_data[] __initconst; +extern const struct imx_flexcan_data imx35_flexcan_data[]; #define imx35_add_flexcan(id, pdata) \ imx_add_flexcan(&imx35_flexcan_data[id], pdata) #define imx35_add_flexcan0(pdata) imx35_add_flexcan(0, pdata) #define imx35_add_flexcan1(pdata) imx35_add_flexcan(1, pdata) -extern const struct imx_imx2_wdt_data imx35_imx2_wdt_data __initconst; +extern const struct imx_imx2_wdt_data imx35_imx2_wdt_data; #define imx35_add_imx2_wdt(pdata) \ imx_add_imx2_wdt(&imx35_imx2_wdt_data) -extern const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst; +extern const struct imx_imx_i2c_data imx35_imx_i2c_data[]; #define imx35_add_imx_i2c(id, pdata) \ imx_add_imx_i2c(&imx35_imx_i2c_data[id], pdata) #define imx35_add_imx_i2c0(pdata) imx35_add_imx_i2c(0, pdata) #define imx35_add_imx_i2c1(pdata) imx35_add_imx_i2c(1, pdata) #define imx35_add_imx_i2c2(pdata) imx35_add_imx_i2c(2, pdata) -extern const struct imx_imx_keypad_data imx35_imx_keypad_data __initconst; +extern const struct imx_imx_keypad_data imx35_imx_keypad_data; #define imx35_add_imx_keypad(pdata) \ imx_add_imx_keypad(&imx35_imx_keypad_data, pdata) -extern const struct imx_imx_ssi_data imx35_imx_ssi_data[] __initconst; +extern const struct imx_imx_ssi_data imx35_imx_ssi_data[]; #define imx35_add_imx_ssi(id, pdata) \ imx_add_imx_ssi(&imx35_imx_ssi_data[id], pdata) -extern const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst; +extern const struct imx_imx_uart_1irq_data imx35_imx_uart_data[]; #define imx35_add_imx_uart(id, pdata) \ imx_add_imx_uart_1irq(&imx35_imx_uart_data[id], pdata) #define imx35_add_imx_uart0(pdata) imx35_add_imx_uart(0, pdata) #define imx35_add_imx_uart1(pdata) imx35_add_imx_uart(1, pdata) #define imx35_add_imx_uart2(pdata) imx35_add_imx_uart(2, pdata) -extern const struct imx_mxc_ehci_data imx35_mxc_ehci_otg_data __initconst; +extern const struct imx_ipu_core_data imx35_ipu_core_data; +#define imx35_add_ipu_core(pdata) \ + imx_add_ipu_core(&imx35_ipu_core_data, pdata) +#define imx35_alloc_mx3_camera(pdata) \ + imx_alloc_mx3_camera(&imx35_ipu_core_data, pdata) +#define imx35_add_mx3_sdc_fb(pdata) \ + imx_add_mx3_sdc_fb(&imx35_ipu_core_data, pdata) + +extern const struct imx_mxc_ehci_data imx35_mxc_ehci_otg_data; #define imx35_add_mxc_ehci_otg(pdata) \ imx_add_mxc_ehci(&imx35_mxc_ehci_otg_data, pdata) -extern const struct imx_mxc_ehci_data imx35_mxc_ehci_hs_data __initconst; +extern const struct imx_mxc_ehci_data imx35_mxc_ehci_hs_data; #define imx35_add_mxc_ehci_hs(pdata) \ imx_add_mxc_ehci(&imx35_mxc_ehci_hs_data, pdata) -extern const struct imx_mxc_nand_data imx35_mxc_nand_data __initconst; +extern const struct imx_mxc_nand_data imx35_mxc_nand_data; #define imx35_add_mxc_nand(pdata) \ imx_add_mxc_nand(&imx35_mxc_nand_data, pdata) -extern const struct imx_mxc_w1_data imx35_mxc_w1_data __initconst; +extern const struct imx_mxc_w1_data imx35_mxc_w1_data; #define imx35_add_mxc_w1(pdata) \ imx_add_mxc_w1(&imx35_mxc_w1_data) -extern const struct imx_sdhci_esdhc_imx_data -imx35_sdhci_esdhc_imx_data[] __initconst; +extern const struct imx_sdhci_esdhc_imx_data imx35_sdhci_esdhc_imx_data[]; #define imx35_add_sdhci_esdhc_imx(id, pdata) \ imx_add_sdhci_esdhc_imx(&imx35_sdhci_esdhc_imx_data[id], pdata) -extern const struct imx_spi_imx_data imx35_cspi_data[] __initconst; +extern const struct imx_spi_imx_data imx35_cspi_data[]; #define imx35_add_cspi(id, pdata) \ imx_add_spi_imx(&imx35_cspi_data[id], pdata) #define imx35_add_spi_imx0(pdata) imx35_add_cspi(0, pdata) diff --git a/arch/arm/mach-mx3/ehci-imx31.c b/arch/arm/mach-imx/ehci-imx31.c index 314a983..faad0f1 100644 --- a/arch/arm/mach-mx3/ehci-imx31.c +++ b/arch/arm/mach-imx/ehci-imx31.c @@ -80,4 +80,3 @@ int mx31_initialize_usb_hw(int port, unsigned int flags) return 0; } - diff --git a/arch/arm/mach-mx3/ehci-imx35.c b/arch/arm/mach-imx/ehci-imx35.c index 33983a4..001ec39 100644 --- a/arch/arm/mach-mx3/ehci-imx35.c +++ b/arch/arm/mach-imx/ehci-imx35.c @@ -77,4 +77,3 @@ int mx35_initialize_usb_hw(int port, unsigned int flags) return 0; } - diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c index fa5288018..5911281 100644 --- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c @@ -32,7 +32,6 @@ #include <mach/common.h> #include <mach/iomux-mx27.h> #include <mach/hardware.h> -#include <mach/spi.h> #include <mach/audmux.h> #include "devices-imx27.h" diff --git a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c index 6269053..f9ef04a 100644 --- a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c @@ -22,7 +22,6 @@ #include <linux/gpio.h> #include <linux/leds.h> #include <linux/platform_device.h> -#include <linux/gpio_keys.h> #include <linux/input.h> #include <video/platform_lcd.h> @@ -32,9 +31,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/mx25.h> -#include <mach/imx-uart.h> #include <mach/audmux.h> -#include <mach/esdhc.h> #include "devices-imx25.h" @@ -208,23 +205,14 @@ static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = { }, }; -static struct gpio_keys_platform_data eukrea_mbimxsd_button_data = { +static const struct gpio_keys_platform_data + eukrea_mbimxsd_button_data __initconst = { .buttons = eukrea_mbimxsd_gpio_buttons, .nbuttons = ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons), }; -static struct platform_device eukrea_mbimxsd_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &eukrea_mbimxsd_button_data, - } -}; - static struct platform_device *platform_devices[] __initdata = { &eukrea_mbimxsd_leds_gpio, - &eukrea_mbimxsd_button_device, &eukrea_mbimxsd_lcd_powerdev, }; @@ -299,4 +287,5 @@ void __init eukrea_mbimxsd25_baseboard_init(void) ARRAY_SIZE(eukrea_mbimxsd_i2c_devices)); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); + imx_add_gpio_keys(&eukrea_mbimxsd_button_data); } diff --git a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c index 2e288b3..4909ea0 100644 --- a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c @@ -26,7 +26,6 @@ #include <linux/interrupt.h> #include <linux/leds.h> #include <linux/platform_device.h> -#include <linux/gpio_keys.h> #include <linux/input.h> #include <video/platform_lcd.h> #include <linux/i2c.h> @@ -38,15 +37,10 @@ #include <mach/hardware.h> #include <mach/common.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx35.h> -#include <mach/ipu.h> -#include <mach/mx3fb.h> #include <mach/audmux.h> -#include <mach/esdhc.h> #include "devices-imx35.h" -#include "devices.h" static const struct fb_videomode fb_modedb[] = { { @@ -101,12 +95,11 @@ static const struct fb_videomode fb_modedb[] = { }, }; -static struct ipu_platform_data mx3_ipu_data = { +static const struct ipu_platform_data mx3_ipu_data __initconst = { .irq_base = MXC_IPU_IRQ_START, }; -static struct mx3fb_platform_data mx3fb_pdata = { - .dma_dev = &mx3_ipu.dev, +static struct mx3fb_platform_data mx3fb_pdata __initdata = { .name = "CMO-QVGA", .mode = fb_modedb, .num_modes = ARRAY_SIZE(fb_modedb), @@ -223,23 +216,14 @@ static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = { }, }; -static struct gpio_keys_platform_data eukrea_mbimxsd_button_data = { +static const struct gpio_keys_platform_data + eukrea_mbimxsd_button_data __initconst = { .buttons = eukrea_mbimxsd_gpio_buttons, .nbuttons = ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons), }; -static struct platform_device eukrea_mbimxsd_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &eukrea_mbimxsd_button_data, - } -}; - static struct platform_device *platform_devices[] __initdata = { &eukrea_mbimxsd_leds_gpio, - &eukrea_mbimxsd_button_device, &eukrea_mbimxsd_lcd_powerdev, }; @@ -292,8 +276,8 @@ void __init eukrea_mbimxsd35_baseboard_init(void) #endif imx35_add_imx_uart1(&uart_pdata); - mxc_register_device(&mx3_ipu, &mx3_ipu_data); - mxc_register_device(&mx3_fb, &mx3fb_pdata); + imx35_add_ipu_core(&mx3_ipu_data); + imx35_add_mx3_sdc_fb(&mx3fb_pdata); imx35_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata); @@ -315,4 +299,5 @@ void __init eukrea_mbimxsd35_baseboard_init(void) ARRAY_SIZE(eukrea_mbimxsd_i2c_devices)); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); + imx_add_gpio_keys(&eukrea_mbimxsd_button_data); } diff --git a/arch/arm/mach-mx3/iomux-imx31.c b/arch/arm/mach-imx/iomux-imx31.c index cf8f809..cf8f809 100644 --- a/arch/arm/mach-mx3/iomux-imx31.c +++ b/arch/arm/mach-imx/iomux-imx31.c diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c new file mode 100644 index 0000000..15e45c8 --- /dev/null +++ b/arch/arm/mach-imx/mach-apf9328.c @@ -0,0 +1,144 @@ +/* + * linux/arch/arm/mach-imx/mach-apf9328.c + * + * Copyright (c) 2005-2011 ARMadeus systems <support@armadeus.com> + * + * This work is based on mach-scb9328.c which is: + * Copyright (c) 2004 Sascha Hauer <saschahauer@web.de> + * Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/mtd/physmap.h> +#include <linux/dm9000.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> + +#include <mach/common.h> +#include <mach/hardware.h> +#include <mach/irqs.h> +#include <mach/iomux-mx1.h> + +#include "devices-imx1.h" + +static const int apf9328_pins[] __initconst = { + /* UART1 */ + PC9_PF_UART1_CTS, + PC10_PF_UART1_RTS, + PC11_PF_UART1_TXD, + PC12_PF_UART1_RXD, + /* UART2 */ + PB28_PF_UART2_CTS, + PB29_PF_UART2_RTS, + PB30_PF_UART2_TXD, + PB31_PF_UART2_RXD, +}; + +/* + * The APF9328 can have up to 32MB NOR Flash + */ +static struct resource flash_resource = { + .start = MX1_CS0_PHYS, + .end = MX1_CS0_PHYS + SZ_32M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct physmap_flash_data apf9328_flash_data = { + .width = 2, +}; + +static struct platform_device apf9328_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &apf9328_flash_data, + }, + .resource = &flash_resource, + .num_resources = 1, +}; + +/* + * APF9328 has a DM9000 Ethernet controller + */ +static struct dm9000_plat_data dm9000_setup = { + .flags = DM9000_PLATF_16BITONLY +}; + +static struct resource dm9000_resources[] = { + { + .start = MX1_CS4_PHYS + 0x00C00000, + .end = MX1_CS4_PHYS + 0x00C00001, + .flags = IORESOURCE_MEM, + }, { + .start = MX1_CS4_PHYS + 0x00C00002, + .end = MX1_CS4_PHYS + 0x00C00003, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_GPIOB(14), + .end = IRQ_GPIOB(14), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + }, +}; + +static struct platform_device dm9000x_device = { + .name = "dm9000", + .id = 0, + .num_resources = ARRAY_SIZE(dm9000_resources), + .resource = dm9000_resources, + .dev = { + .platform_data = &dm9000_setup, + } +}; + +/* --- SERIAL RESSOURCE --- */ +static const struct imxuart_platform_data uart0_pdata __initconst = { + .flags = 0, +}; + +static const struct imxuart_platform_data uart1_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static struct platform_device *devices[] __initdata = { + &apf9328_flash_device, + &dm9000x_device, +}; + +static void __init apf9328_init(void) +{ + mxc_gpio_setup_multiple_pins(apf9328_pins, + ARRAY_SIZE(apf9328_pins), + "APF9328"); + + imx1_add_imx_uart0(&uart0_pdata); + imx1_add_imx_uart1(&uart1_pdata); + + platform_add_devices(devices, ARRAY_SIZE(devices)); +} + +static void __init apf9328_timer_init(void) +{ + mx1_clocks_init(32768); +} + +static struct sys_timer apf9328_timer = { + .init = apf9328_timer_init, +}; + +MACHINE_START(APF9328, "Armadeus APF9328") + /* Maintainer: Gwenhael Goavec-Merou, ARMadeus Systems */ + .map_io = mx1_map_io, + .init_early = imx1_init_early, + .init_irq = mx1_init_irq, + .timer = &apf9328_timer, + .init_machine = apf9328_init, +MACHINE_END diff --git a/arch/arm/mach-mx3/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c index 226829b..ffb40ff 100644 --- a/arch/arm/mach-mx3/mach-armadillo5x0.c +++ b/arch/arm/mach-imx/mach-armadillo5x0.c @@ -34,7 +34,6 @@ #include <linux/mtd/physmap.h> #include <linux/io.h> #include <linux/input.h> -#include <linux/gpio_keys.h> #include <linux/i2c.h> #include <linux/usb/otg.h> #include <linux/usb/ulpi.h> @@ -49,13 +48,10 @@ #include <mach/common.h> #include <mach/iomux-mx3.h> -#include <mach/ipu.h> -#include <mach/mx3fb.h> #include <mach/ulpi.h> #include "devices-imx31.h" -#include "devices.h" -#include "crm_regs.h" +#include "crmregs-imx31.h" static int armadillo5x0_pins[] = { /* UART1 */ @@ -280,20 +276,12 @@ static struct gpio_keys_button armadillo5x0_buttons[] = { } }; -static struct gpio_keys_platform_data armadillo5x0_button_data = { +static const struct gpio_keys_platform_data + armadillo5x0_button_data __initconst = { .buttons = armadillo5x0_buttons, .nbuttons = ARRAY_SIZE(armadillo5x0_buttons), }; -static struct platform_device armadillo5x0_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &armadillo5x0_button_data, - } -}; - /* * NAND Flash */ @@ -383,12 +371,11 @@ static const struct fb_videomode fb_modedb[] = { }, }; -static struct ipu_platform_data mx3_ipu_data = { +static const struct ipu_platform_data mx3_ipu_data __initconst = { .irq_base = MXC_IPU_IRQ_START, }; -static struct mx3fb_platform_data mx3fb_pdata = { - .dma_dev = &mx3_ipu.dev, +static struct mx3fb_platform_data mx3fb_pdata __initdata = { .name = "CRT-VGA", .mode = fb_modedb, .num_modes = ARRAY_SIZE(fb_modedb), @@ -496,7 +483,6 @@ static const struct imxuart_platform_data uart_pdata __initconst = { static struct platform_device *devices[] __initdata = { &armadillo5x0_smc911x_device, - &armadillo5x0_button_device, }; /* @@ -508,6 +494,7 @@ static void __init armadillo5x0_init(void) ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0"); platform_add_devices(devices, ARRAY_SIZE(devices)); + imx_add_gpio_keys(&armadillo5x0_button_data); imx31_add_imx_i2c1(NULL); /* Register UART */ @@ -521,8 +508,8 @@ static void __init armadillo5x0_init(void) imx31_add_mxc_mmc(0, &sdhc_pdata); /* Register FB */ - mxc_register_device(&mx3_ipu, &mx3_ipu_data); - mxc_register_device(&mx3_fb, &mx3fb_pdata); + imx31_add_ipu_core(&mx3_ipu_data); + imx31_add_mx3_sdc_fb(&mx3fb_pdata); /* Register NOR Flash */ mxc_register_device(&armadillo5x0_nor_flash, diff --git a/arch/arm/mach-mx3/mach-bug.c b/arch/arm/mach-imx/mach-bug.c index d137d70..42e4f07 100644 --- a/arch/arm/mach-mx3/mach-bug.c +++ b/arch/arm/mach-imx/mach-bug.c @@ -20,7 +20,6 @@ #include <linux/platform_device.h> #include <mach/iomux-mx3.h> -#include <mach/imx-uart.h> #include <mach/hardware.h> #include <mach/common.h> diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c index 759299b..46a2e41 100644 --- a/arch/arm/mach-imx/mach-cpuimx27.c +++ b/arch/arm/mach-imx/mach-cpuimx27.c @@ -38,7 +38,6 @@ #include <mach/common.h> #include <mach/hardware.h> #include <mach/iomux-mx27.h> -#include <mach/mxc_nand.h> #include <mach/ulpi.h> #include "devices-imx27.h" diff --git a/arch/arm/mach-mx3/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c index ec63d99..3f8ef82 100644 --- a/arch/arm/mach-mx3/mach-cpuimx35.c +++ b/arch/arm/mach-imx/mach-cpuimx35.c @@ -41,10 +41,8 @@ #include <mach/hardware.h> #include <mach/common.h> #include <mach/iomux-mx35.h> -#include <mach/mxc_nand.h> #include "devices-imx35.h" -#include "devices.h" static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c index 9da8d18..148cff2 100644 --- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c +++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c @@ -36,8 +36,6 @@ #include <asm/mach/map.h> #include <mach/common.h> #include <mach/mx25.h> -#include <mach/mxc_nand.h> -#include <mach/imxfb.h> #include <mach/iomux-mx25.h> #include "devices-imx25.h" diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index d7e0d21..7ae43b1 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -27,7 +27,6 @@ #include <linux/mtd/physmap.h> #include <linux/i2c.h> #include <linux/i2c/pca953x.h> -#include <linux/gpio_keys.h> #include <linux/input.h> #include <linux/gpio.h> #include <linux/delay.h> @@ -130,19 +129,12 @@ static struct gpio_keys_button visstrim_gpio_keys[] = { } }; -static struct gpio_keys_platform_data visstrim_gpio_keys_platform_data = { +static const struct gpio_keys_platform_data + visstrim_gpio_keys_platform_data __initconst = { .buttons = visstrim_gpio_keys, .nbuttons = ARRAY_SIZE(visstrim_gpio_keys), }; -static struct platform_device visstrim_gpio_keys_device = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &visstrim_gpio_keys_platform_data, - }, -}; - /* Visstrim_SM10 has a microSD slot connected to sdhc1 */ static int visstrim_m10_sdhc1_init(struct device *dev, irq_handler_t detect_irq, void *data) @@ -186,7 +178,6 @@ static struct platform_device visstrim_m10_nor_mtd_device = { }; static struct platform_device *platform_devices[] __initdata = { - &visstrim_gpio_keys_device, &visstrim_m10_nor_mtd_device, }; @@ -255,6 +246,7 @@ static void __init visstrim_m10_board_init(void) imx27_add_mxc_mmc(0, &visstrim_m10_sdhc_pdata); imx27_add_mxc_ehci_otg(&visstrim_m10_usbotg_pdata); imx27_add_fec(NULL); + imx_add_gpio_keys(&visstrim_gpio_keys_platform_data); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); } diff --git a/arch/arm/mach-mx3/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c index d35621d..1ecae20 100644 --- a/arch/arm/mach-mx3/mach-kzm_arm11_01.c +++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c @@ -39,7 +39,6 @@ #include <mach/iomux-mx3.h> #include "devices-imx31.h" -#include "devices.h" #define KZM_ARM11_IO_ADDRESS(x) (IOMEM( \ IMX_IO_P2V_MODULE(x, MX31_CS4) ?: \ diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c index 47cf56a..38ec5cb 100644 --- a/arch/arm/mach-imx/mach-mx1ads.c +++ b/arch/arm/mach-imx/mach-mx1ads.c @@ -25,7 +25,6 @@ #include <mach/common.h> #include <mach/hardware.h> -#include <mach/i2c.h> #include <mach/iomux-mx1.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c index fa52a10..74ac889 100644 --- a/arch/arm/mach-imx/mach-mx21ads.c +++ b/arch/arm/mach-imx/mach-mx21ads.c @@ -25,7 +25,6 @@ #include <asm/mach/time.h> #include <asm/mach/map.h> #include <mach/iomux-mx21.h> -#include <mach/mxc_nand.h> #include "devices-imx21.h" diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c index 06da438..58ea3fd 100644 --- a/arch/arm/mach-imx/mach-mx25_3ds.c +++ b/arch/arm/mach-imx/mach-mx25_3ds.c @@ -29,7 +29,6 @@ #include <linux/irq.h> #include <linux/gpio.h> #include <linux/platform_device.h> -#include <linux/input/matrix_keypad.h> #include <linux/usb/otg.h> #include <mach/hardware.h> @@ -103,6 +102,8 @@ static iomux_v3_cfg_t mx25pdk_pads[] = { MX25_PAD_SD1_DATA1__SD1_DATA1, MX25_PAD_SD1_DATA2__SD1_DATA2, MX25_PAD_SD1_DATA3__SD1_DATA3, + MX25_PAD_A14__GPIO_2_0, /* WriteProtect */ + MX25_PAD_A15__GPIO_2_1, /* CardDetect */ /* I2C1 */ MX25_PAD_I2C1_CLK__I2C1_CLK, @@ -208,6 +209,14 @@ static const struct imxi2c_platform_data mx25_3ds_i2c0_data __initconst = { .bitrate = 100000, }; +#define SD1_GPIO_WP IMX_GPIO_NR(2, 0) +#define SD1_GPIO_CD IMX_GPIO_NR(2, 1) + +static const struct esdhc_platform_data mx25pdk_esdhc_pdata __initconst = { + .wp_gpio = SD1_GPIO_WP, + .cd_gpio = SD1_GPIO_CD, +}; + static void __init mx25pdk_init(void) { mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads, @@ -225,7 +234,7 @@ static void __init mx25pdk_init(void) imx25_add_fec(&mx25_fec_pdata); imx25_add_imx_keypad(&mx25pdk_keymap_data); - imx25_add_sdhci_esdhc_imx(0, NULL); + imx25_add_sdhci_esdhc_imx(0, &mx25pdk_esdhc_pdata); imx25_add_imx_i2c0(&mx25_3ds_i2c0_data); } diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c index 367d1e4..1db7950 100644 --- a/arch/arm/mach-imx/mach-mx27ads.c +++ b/arch/arm/mach-imx/mach-mx27ads.c @@ -29,7 +29,6 @@ #include <asm/mach/map.h> #include <mach/gpio.h> #include <mach/iomux-mx27.h> -#include <mach/mxc_nand.h> #include "devices-imx27.h" diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c index 034be62..9b98244 100644 --- a/arch/arm/mach-mx3/mach-mx31_3ds.c +++ b/arch/arm/mach-imx/mach-mx31_3ds.c @@ -39,13 +39,8 @@ #include <mach/iomux-mx3.h> #include <mach/3ds_debugboard.h> #include <mach/ulpi.h> -#include <mach/mmc.h> -#include <mach/ipu.h> -#include <mach/mx3fb.h> -#include <mach/mx3_camera.h> #include "devices-imx31.h" -#include "devices.h" /* CPLD IRQ line for external uart, external ethernet etc */ #define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_1) @@ -178,22 +173,37 @@ static struct gpio mx31_3ds_camera_gpios[] = { { MX31_3DS_GPIO_CAMERA_RST, GPIOF_OUT_INIT_HIGH, "camera-reset" }, }; -static int __init mx31_3ds_camera_alloc_dma(void) +static const struct mx3_camera_pdata mx31_3ds_camera_pdata __initconst = { + .flags = MX3_CAMERA_DATAWIDTH_10, + .mclk_10khz = 2600, +}; + +static int __init mx31_3ds_init_camera(void) { - int dma; + int dma, ret = -ENOMEM; + struct platform_device *pdev = + imx31_alloc_mx3_camera(&mx31_3ds_camera_pdata); + + if (IS_ERR(pdev)) + return PTR_ERR(pdev); if (!mx3_camera_base) - return -ENOMEM; + goto err; - dma = dma_declare_coherent_memory(&mx3_camera.dev, + dma = dma_declare_coherent_memory(&pdev->dev, mx3_camera_base, mx3_camera_base, MX31_3DS_CAMERA_BUF_SIZE, DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE); if (!(dma & DMA_MEMORY_MAP)) - return -ENOMEM; + goto err; - return 0; + ret = platform_device_add(pdev); + if (ret) +err: + platform_device_put(pdev); + + return ret; } static int mx31_3ds_camera_power(struct device *dev, int on) @@ -241,12 +251,6 @@ static struct platform_device mx31_3ds_ov2640 = { }, }; -struct mx3_camera_pdata mx31_3ds_camera_pdata = { - .dma_dev = &mx3_ipu.dev, - .flags = MX3_CAMERA_DATAWIDTH_10, - .mclk_10khz = 2600, -}; - /* * FB support */ @@ -273,8 +277,7 @@ static struct ipu_platform_data mx3_ipu_data = { .irq_base = MXC_IPU_IRQ_START, }; -static struct mx3fb_platform_data mx3fb_pdata = { - .dma_dev = &mx3_ipu.dev, +static struct mx3fb_platform_data mx3fb_pdata __initdata = { .name = "Epson-VGA", .mode = fb_modedb, .num_modes = ARRAY_SIZE(fb_modedb), @@ -723,8 +726,8 @@ static void __init mx31_3ds_init(void) imx31_add_mxc_mmc(0, &sdhc1_pdata); imx31_add_spi_imx0(&spi0_pdata); - mxc_register_device(&mx3_ipu, &mx3_ipu_data); - mxc_register_device(&mx3_fb, &mx3fb_pdata); + imx31_add_ipu_core(&mx3_ipu_data); + imx31_add_mx3_sdc_fb(&mx3fb_pdata); /* CSI */ /* Camera power: default - off */ @@ -735,10 +738,7 @@ static void __init mx31_3ds_init(void) iclink_ov2640.power = NULL; } - if (!mx31_3ds_camera_alloc_dma()) - mxc_register_device(&mx3_camera, &mx31_3ds_camera_pdata); - else - pr_err("Failed to allocate dma memory for camera"); + mx31_3ds_init_camera(); } static void __init mx31_3ds_timer_init(void) diff --git a/arch/arm/mach-mx3/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c index 3d095d6..f4dee02 100644 --- a/arch/arm/mach-mx3/mach-mx31ads.c +++ b/arch/arm/mach-imx/mach-mx31ads.c @@ -38,7 +38,6 @@ #endif #include "devices-imx31.h" -#include "devices.h" /* PBC Board interrupt status register */ #define PBC_INTSTATUS 0x000016 diff --git a/arch/arm/mach-mx3/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c index ed95745..410e676 100644 --- a/arch/arm/mach-mx3/mach-mx31lilly.c +++ b/arch/arm/mach-imx/mach-mx31lilly.c @@ -46,7 +46,6 @@ #include <mach/ulpi.h> #include "devices-imx31.h" -#include "devices.h" /* * This file contains module-specific initialization routines for LILLY-1131. diff --git a/arch/arm/mach-mx3/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c index 24a21a3..ac9b4ca 100644 --- a/arch/arm/mach-mx3/mach-mx31lite.c +++ b/arch/arm/mach-imx/mach-mx31lite.c @@ -44,7 +44,6 @@ #include <mach/ulpi.h> #include "devices-imx31.h" -#include "devices.h" /* * This file contains the module-specific initialization routines. diff --git a/arch/arm/mach-mx3/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c index 3a021b0..eaa51e4 100644 --- a/arch/arm/mach-mx3/mach-mx31moboard.c +++ b/arch/arm/mach-imx/mach-mx31moboard.c @@ -27,6 +27,7 @@ #include <linux/mfd/mc13783.h> #include <linux/spi/spi.h> #include <linux/types.h> +#include <linux/memblock.h> #include <linux/usb/otg.h> #include <linux/usb/ulpi.h> @@ -39,13 +40,9 @@ #include <mach/common.h> #include <mach/hardware.h> #include <mach/iomux-mx3.h> -#include <mach/ipu.h> -#include <mach/mx3_camera.h> -#include <mach/spi.h> #include <mach/ulpi.h> #include "devices-imx31.h" -#include "devices.h" static unsigned int moboard_pins[] = { /* UART0 */ @@ -102,7 +99,7 @@ static unsigned int moboard_pins[] = { }; static struct physmap_flash_data mx31moboard_flash_data = { - .width = 2, + .width = 2, }; static struct resource mx31moboard_flash_resource = { @@ -194,8 +191,8 @@ static struct regulator_init_data sdhc_vreg_data = { static struct regulator_consumer_supply cam_consumers[] = { { - .dev = &mx3_camera.dev, - .supply = "cam_vcc", + .dev_name = "mx3_camera.0", + .supply = "cam_vcc", }, }; @@ -430,9 +427,9 @@ static int __init moboard_usbh2_init(void) static struct gpio_led mx31moboard_leds[] = { { - .name = "coreboard-led-0:red:running", + .name = "coreboard-led-0:red:running", .default_trigger = "heartbeat", - .gpio = IOMUX_TO_GPIO(MX31_PIN_SVEN0), + .gpio = IOMUX_TO_GPIO(MX31_PIN_SVEN0), }, { .name = "coreboard-led-1:red", .gpio = IOMUX_TO_GPIO(MX31_PIN_STX0), @@ -446,7 +443,7 @@ static struct gpio_led mx31moboard_leds[] = { }; static struct gpio_led_platform_data mx31moboard_led_pdata = { - .num_leds = ARRAY_SIZE(mx31moboard_leds), + .num_leds = ARRAY_SIZE(mx31moboard_leds), .leds = mx31moboard_leds, }; @@ -458,7 +455,7 @@ static struct platform_device mx31moboard_leds_device = { }, }; -static struct ipu_platform_data mx3_ipu_data = { +static const struct ipu_platform_data mx3_ipu_data __initconst = { .irq_base = MXC_IPU_IRQ_START, }; @@ -467,37 +464,39 @@ static struct platform_device *devices[] __initdata = { &mx31moboard_leds_device, }; -static struct mx3_camera_pdata camera_pdata = { - .dma_dev = &mx3_ipu.dev, +static struct mx3_camera_pdata camera_pdata __initdata = { .flags = MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10, .mclk_10khz = 4800, }; -#define CAMERA_BUF_SIZE (4*1024*1024) +static phys_addr_t mx3_camera_base __initdata; +#define MX3_CAMERA_BUF_SIZE SZ_4M -static int __init mx31moboard_cam_alloc_dma(const size_t buf_size) +static int __init mx31moboard_init_cam(void) { - dma_addr_t dma_handle; - void *buf; - int dma; - - if (buf_size < 2 * 1024 * 1024) - return -EINVAL; + int dma, ret = -ENOMEM; + struct platform_device *pdev; - buf = dma_alloc_coherent(NULL, buf_size, &dma_handle, GFP_KERNEL); - if (!buf) { - pr_err("%s: cannot allocate camera buffer-memory\n", __func__); - return -ENOMEM; - } + imx31_add_ipu_core(&mx3_ipu_data); - memset(buf, 0, buf_size); + pdev = imx31_alloc_mx3_camera(&camera_pdata); + if (IS_ERR(pdev)) + return PTR_ERR(pdev); - dma = dma_declare_coherent_memory(&mx3_camera.dev, - dma_handle, dma_handle, buf_size, + dma = dma_declare_coherent_memory(&pdev->dev, + mx3_camera_base, mx3_camera_base, + MX3_CAMERA_BUF_SIZE, DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE); + if (!(dma & DMA_MEMORY_MAP)) + goto err; + + ret = platform_device_add(pdev); + if (ret) +err: + platform_device_put(pdev); + + return ret; - /* The way we call dma_declare_coherent_memory only a malloc can fail */ - return dma & DMA_MEMORY_MAP ? 0 : -ENOMEM; } static int mx31moboard_baseboard; @@ -529,9 +528,7 @@ static void __init mx31moboard_init(void) imx31_add_mxc_mmc(0, &sdhc1_pdata); - mxc_register_device(&mx3_ipu, &mx3_ipu_data); - if (!mx31moboard_cam_alloc_dma(CAMERA_BUF_SIZE)) - mxc_register_device(&mx3_camera, &camera_pdata); + mx31moboard_init_cam(); usb_xcvr_reset(); @@ -565,9 +562,19 @@ struct sys_timer mx31moboard_timer = { .init = mx31moboard_timer_init, }; +static void __init mx31moboard_reserve(void) +{ + /* reserve 4 MiB for mx3-camera */ + mx3_camera_base = memblock_alloc(MX3_CAMERA_BUF_SIZE, + MX3_CAMERA_BUF_SIZE); + memblock_free(mx3_camera_base, MX3_CAMERA_BUF_SIZE); + memblock_remove(mx3_camera_base, MX3_CAMERA_BUF_SIZE); +} + MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard") /* Maintainer: Valentin Longchamp, EPFL Mobots group */ .boot_params = MX3x_PHYS_OFFSET + 0x100, + .reserve = mx31moboard_reserve, .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, diff --git a/arch/arm/mach-mx3/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c index ff5fe23..882880a 100644 --- a/arch/arm/mach-mx3/mach-mx35_3ds.c +++ b/arch/arm/mach-imx/mach-mx35_3ds.c @@ -42,7 +42,6 @@ #include <mach/3ds_debugboard.h> #include "devices-imx35.h" -#include "devices.h" #define EXPIO_PARENT_INT (MXC_INTERNAL_IRQS + GPIO_PORTA + 1) diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c index 69787c3..2774541 100644 --- a/arch/arm/mach-imx/mach-mxt_td60.c +++ b/arch/arm/mach-imx/mach-mxt_td60.c @@ -29,7 +29,6 @@ #include <asm/mach/map.h> #include <linux/gpio.h> #include <mach/iomux-mx27.h> -#include <mach/mxc_nand.h> #include <linux/i2c/pca953x.h> #include "devices-imx27.h" diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c index 63e1825..bbddc5a 100644 --- a/arch/arm/mach-imx/mach-pca100.c +++ b/arch/arm/mach-imx/mach-pca100.c @@ -37,7 +37,6 @@ #include <mach/iomux-mx27.h> #include <asm/mach/time.h> #include <mach/audmux.h> -#include <mach/mxc_nand.h> #include <mach/irqs.h> #include <mach/ulpi.h> diff --git a/arch/arm/mach-mx3/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c index f07d3bd..89c213b 100644 --- a/arch/arm/mach-mx3/mach-pcm037.c +++ b/arch/arm/mach-imx/mach-pcm037.c @@ -31,6 +31,7 @@ #include <linux/usb/otg.h> #include <linux/usb/ulpi.h> #include <linux/gfp.h> +#include <linux/memblock.h> #include <media/soc_camera.h> @@ -41,13 +42,9 @@ #include <mach/common.h> #include <mach/hardware.h> #include <mach/iomux-mx3.h> -#include <mach/ipu.h> -#include <mach/mx3_camera.h> -#include <mach/mx3fb.h> #include <mach/ulpi.h> #include "devices-imx31.h" -#include "devices.h" #include "pcm037.h" static enum pcm037_board_variant pcm037_instance = PCM037_PCM970; @@ -404,35 +401,35 @@ static const struct imxmmc_platform_data sdhc_pdata __initconst = { .exit = pcm970_sdhc1_exit, }; -struct mx3_camera_pdata camera_pdata = { - .dma_dev = &mx3_ipu.dev, +struct mx3_camera_pdata camera_pdata __initdata = { .flags = MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10, .mclk_10khz = 2000, }; -static int __init pcm037_camera_alloc_dma(const size_t buf_size) -{ - dma_addr_t dma_handle; - void *buf; - int dma; - - if (buf_size < 2 * 1024 * 1024) - return -EINVAL; +static phys_addr_t mx3_camera_base __initdata; +#define MX3_CAMERA_BUF_SIZE SZ_4M - buf = dma_alloc_coherent(NULL, buf_size, &dma_handle, GFP_KERNEL); - if (!buf) { - pr_err("%s: cannot allocate camera buffer-memory\n", __func__); - return -ENOMEM; - } +static int __init pcm037_init_camera(void) +{ + int dma, ret = -ENOMEM; + struct platform_device *pdev = imx31_alloc_mx3_camera(&camera_pdata); - memset(buf, 0, buf_size); + if (IS_ERR(pdev)) + return PTR_ERR(pdev); - dma = dma_declare_coherent_memory(&mx3_camera.dev, - dma_handle, dma_handle, buf_size, + dma = dma_declare_coherent_memory(&pdev->dev, + mx3_camera_base, mx3_camera_base, + MX3_CAMERA_BUF_SIZE, DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE); + if (!(dma & DMA_MEMORY_MAP)) + goto err; + + ret = platform_device_add(pdev); + if (ret) +err: + platform_device_put(pdev); - /* The way we call dma_declare_coherent_memory only a malloc can fail */ - return dma & DMA_MEMORY_MAP ? 0 : -ENOMEM; + return ret; } static struct platform_device *devices[] __initdata = { @@ -442,7 +439,7 @@ static struct platform_device *devices[] __initdata = { &pcm037_mt9v022, }; -static struct ipu_platform_data mx3_ipu_data = { +static const struct ipu_platform_data mx3_ipu_data __initconst = { .irq_base = MXC_IPU_IRQ_START, }; @@ -500,7 +497,6 @@ static const struct fb_videomode fb_modedb[] = { }; static struct mx3fb_platform_data mx3fb_pdata = { - .dma_dev = &mx3_ipu.dev, .name = "Sharp-LQ035Q7DH06-QVGA", .mode = fb_modedb, .num_modes = ARRAY_SIZE(fb_modedb), @@ -638,8 +634,8 @@ static void __init pcm037_init(void) imx31_add_mxc_nand(&pcm037_nand_board_info); imx31_add_mxc_mmc(0, &sdhc_pdata); - mxc_register_device(&mx3_ipu, &mx3_ipu_data); - mxc_register_device(&mx3_fb, &mx3fb_pdata); + imx31_add_ipu_core(&mx3_ipu_data); + imx31_add_mx3_sdc_fb(&mx3fb_pdata); /* CSI */ /* Camera power: default - off */ @@ -649,8 +645,7 @@ static void __init pcm037_init(void) else iclink_mt9t031.power = NULL; - if (!pcm037_camera_alloc_dma(4 * 1024 * 1024)) - mxc_register_device(&mx3_camera, &camera_pdata); + pcm037_init_camera(); platform_device_register(&pcm970_sja1000); @@ -680,9 +675,19 @@ struct sys_timer pcm037_timer = { .init = pcm037_timer_init, }; +static void __init pcm037_reserve(void) +{ + /* reserve 4 MiB for mx3-camera */ + mx3_camera_base = memblock_alloc(MX3_CAMERA_BUF_SIZE, + MX3_CAMERA_BUF_SIZE); + memblock_free(mx3_camera_base, MX3_CAMERA_BUF_SIZE); + memblock_remove(mx3_camera_base, MX3_CAMERA_BUF_SIZE); +} + MACHINE_START(PCM037, "Phytec Phycore pcm037") /* Maintainer: Pengutronix */ .boot_params = MX3x_PHYS_OFFSET + 0x100, + .reserve = pcm037_reserve, .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, diff --git a/arch/arm/mach-mx3/mach-pcm037_eet.c b/arch/arm/mach-imx/mach-pcm037_eet.c index df6fb07..1b7606b 100644 --- a/arch/arm/mach-mx3/mach-pcm037_eet.c +++ b/arch/arm/mach-imx/mach-pcm037_eet.c @@ -7,19 +7,16 @@ * published by the Free Software Foundation. */ #include <linux/gpio.h> -#include <linux/gpio_keys.h> #include <linux/input.h> #include <linux/platform_device.h> #include <linux/spi/spi.h> #include <mach/common.h> #include <mach/iomux-mx3.h> -#include <mach/spi.h> #include <asm/mach-types.h> #include "pcm037.h" -#include "devices.h" #include "devices-imx31.h" static unsigned int pcm037_eet_pins[] = { @@ -156,20 +153,13 @@ static struct gpio_keys_button pcm037_gpio_keys[] = { }, }; -static struct gpio_keys_platform_data pcm037_gpio_keys_platform_data = { +static const struct gpio_keys_platform_data + pcm037_gpio_keys_platform_data __initconst = { .buttons = pcm037_gpio_keys, .nbuttons = ARRAY_SIZE(pcm037_gpio_keys), .rep = 0, /* No auto-repeat */ }; -static struct platform_device pcm037_gpio_keys_device = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &pcm037_gpio_keys_platform_data, - }, -}; - static int __init eet_init_devices(void) { if (!machine_is_pcm037() || pcm037_variant() != PCM037_EET) @@ -182,9 +172,8 @@ static int __init eet_init_devices(void) spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev)); imx31_add_spi_imx0(&pcm037_spi1_pdata); - platform_device_register(&pcm037_gpio_keys_device); + imx_add_gpio_keys(&pcm037_gpio_keys_platform_data); return 0; } - late_initcall(eet_init_devices); diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c index 4cbce6d..853bb87 100644 --- a/arch/arm/mach-imx/mach-pcm038.c +++ b/arch/arm/mach-imx/mach-pcm038.c @@ -36,7 +36,6 @@ #include <mach/common.h> #include <mach/hardware.h> #include <mach/iomux-mx27.h> -#include <mach/mxc_nand.h> #include <mach/ulpi.h> #include "devices-imx27.h" diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c index 036ba1a..0264416 100644 --- a/arch/arm/mach-mx3/mach-pcm043.c +++ b/arch/arm/mach-imx/mach-pcm043.c @@ -36,14 +36,10 @@ #include <mach/hardware.h> #include <mach/common.h> #include <mach/iomux-mx35.h> -#include <mach/ipu.h> -#include <mach/mx3fb.h> #include <mach/ulpi.h> #include <mach/audmux.h> -#include <mach/esdhc.h> #include "devices-imx35.h" -#include "devices.h" static const struct fb_videomode fb_modedb[] = { { @@ -81,12 +77,11 @@ static const struct fb_videomode fb_modedb[] = { }, }; -static struct ipu_platform_data mx3_ipu_data = { +static const struct ipu_platform_data mx3_ipu_data __initconst = { .irq_base = MXC_IPU_IRQ_START, }; -static struct mx3fb_platform_data mx3fb_pdata = { - .dma_dev = &mx3_ipu.dev, +static struct mx3fb_platform_data mx3fb_pdata __initdata = { .name = "Sharp-LQ035Q7", .mode = fb_modedb, .num_modes = ARRAY_SIZE(fb_modedb), @@ -127,12 +122,12 @@ static struct at24_platform_data board_eeprom = { }; static struct i2c_board_info pcm043_i2c_devices[] = { - { + { I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */ .platform_data = &board_eeprom, }, { I2C_BOARD_INFO("pcf8563", 0x51), - } + }, }; static struct platform_device *devices[] __initdata = { @@ -390,8 +385,8 @@ static void __init pcm043_init(void) imx35_add_imx_i2c0(&pcm043_i2c0_data); - mxc_register_device(&mx3_ipu, &mx3_ipu_data); - mxc_register_device(&mx3_fb, &mx3fb_pdata); + imx35_add_ipu_core(&mx3_ipu_data); + imx35_add_mx3_sdc_fb(&mx3fb_pdata); if (otg_mode_host) { otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | diff --git a/arch/arm/mach-mx3/mach-qong.c b/arch/arm/mach-imx/mach-qong.c index 17f758b..c1632871 100644 --- a/arch/arm/mach-mx3/mach-qong.c +++ b/arch/arm/mach-imx/mach-qong.c @@ -33,24 +33,23 @@ #include <mach/iomux-mx3.h> #include "devices-imx31.h" -#include "devices.h" /* FPGA defines */ #define QONG_FPGA_VERSION(major, minor, rev) \ (((major & 0xF) << 12) | ((minor & 0xF) << 8) | (rev & 0xFF)) -#define QONG_FPGA_BASEADDR MX31_CS1_BASE_ADDR -#define QONG_FPGA_PERIPH_SIZE (1 << 24) +#define QONG_FPGA_BASEADDR MX31_CS1_BASE_ADDR +#define QONG_FPGA_PERIPH_SIZE (1 << 24) #define QONG_FPGA_CTRL_BASEADDR QONG_FPGA_BASEADDR -#define QONG_FPGA_CTRL_SIZE 0x10 +#define QONG_FPGA_CTRL_SIZE 0x10 /* FPGA control registers */ #define QONG_FPGA_CTRL_VERSION 0x00 #define QONG_DNET_ID 1 #define QONG_DNET_BASEADDR \ (QONG_FPGA_BASEADDR + QONG_DNET_ID * QONG_FPGA_PERIPH_SIZE) -#define QONG_DNET_SIZE 0x00001000 +#define QONG_DNET_SIZE 0x00001000 #define QONG_FPGA_IRQ IOMUX_TO_IRQ(MX31_PIN_DTR_DCE1) @@ -166,15 +165,15 @@ static struct platform_nand_data qong_nand_data = { .options = 0, }, .ctrl = { - .cmd_ctrl = qong_nand_cmd_ctrl, + .cmd_ctrl = qong_nand_cmd_ctrl, .dev_ready = qong_nand_device_ready, .select_chip = qong_nand_select_chip, } }; static struct resource qong_nand_resource = { - .start = MX31_CS3_BASE_ADDR, - .end = MX31_CS3_BASE_ADDR + SZ_32M - 1, + .start = MX31_CS3_BASE_ADDR, + .end = MX31_CS3_BASE_ADDR + SZ_32M - 1, .flags = IORESOURCE_MEM, }; diff --git a/arch/arm/mach-mx3/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c index 47a69cb..d74e347 100644 --- a/arch/arm/mach-mx3/mach-vpr200.c +++ b/arch/arm/mach-imx/mach-vpr200.c @@ -32,16 +32,12 @@ #include <mach/common.h> #include <mach/iomux-mx35.h> #include <mach/irqs.h> -#include <mach/ipu.h> -#include <mach/mx3fb.h> #include <linux/i2c.h> #include <linux/i2c/at24.h> #include <linux/mfd/mc13xxx.h> -#include <linux/gpio_keys.h> #include "devices-imx35.h" -#include "devices.h" #define GPIO_LCDPWR IMX_GPIO_NR(1, 2) #define GPIO_PMIC_INT IMX_GPIO_NR(2, 0) @@ -91,12 +87,11 @@ static const struct fb_videomode fb_modedb[] = { } }; -static struct ipu_platform_data mx3_ipu_data = { +static const struct ipu_platform_data mx3_ipu_data __initconst = { .irq_base = MXC_IPU_IRQ_START, }; -static struct mx3fb_platform_data mx3fb_pdata = { - .dma_dev = &mx3_ipu.dev, +static struct mx3fb_platform_data mx3fb_pdata __initdata = { .name = "PT0708048", .mode = fb_modedb, .num_modes = ARRAY_SIZE(fb_modedb), @@ -141,18 +136,12 @@ static struct gpio_keys_button vpr200_gpio_keys_table[] = { {KEY_F9, GPIO_BUTTON8, 1, "vpr-keys: F9", 1, VPR_KEY_DEBOUNCE}, }; -static struct gpio_keys_platform_data vpr200_gpio_keys_data = { +static const struct gpio_keys_platform_data + vpr200_gpio_keys_data __initconst = { .buttons = vpr200_gpio_keys_table, .nbuttons = ARRAY_SIZE(vpr200_gpio_keys_table), }; -static struct platform_device vpr200_device_gpiokeys = { - .name = "gpio-keys", - .dev = { - .platform_data = &vpr200_gpio_keys_data, - } -}; - static struct mc13xxx_platform_data vpr200_pmic = { .flags = MC13XXX_USE_ADC | MC13XXX_USE_TOUCHSCREEN, }; @@ -271,7 +260,6 @@ static const struct mxc_usbh_platform_data usb_host_pdata __initconst = { static struct platform_device *devices[] __initdata = { &vpr200_flash, - &vpr200_device_gpiokeys, }; /* @@ -283,6 +271,7 @@ static void __init vpr200_board_init(void) imx35_add_fec(NULL); imx35_add_imx2_wdt(NULL); + imx_add_gpio_keys(&vpr200_gpio_keys_data); platform_add_devices(devices, ARRAY_SIZE(devices)); @@ -299,8 +288,8 @@ static void __init vpr200_board_init(void) imx35_add_imx_uart0(NULL); imx35_add_imx_uart2(NULL); - mxc_register_device(&mx3_ipu, &mx3_ipu_data); - mxc_register_device(&mx3_fb, &mx3fb_pdata); + imx35_add_ipu_core(&mx3_ipu_data); + imx35_add_mx3_sdc_fb(&mx3fb_pdata); imx35_add_fsl_usb2_udc(&otg_device_pdata); imx35_add_mxc_ehci_hs(&usb_host_pdata); diff --git a/arch/arm/mach-imx/mm-imx31.c b/arch/arm/mach-imx/mm-imx31.c new file mode 100644 index 0000000..86b9b45 --- /dev/null +++ b/arch/arm/mach-imx/mm-imx31.c @@ -0,0 +1,66 @@ +/* + * Copyright (C) 1999,2000 Arm Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * - add MX31 specific definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/err.h> + +#include <asm/pgtable.h> +#include <asm/mach/map.h> + +#include <mach/common.h> +#include <mach/hardware.h> +#include <mach/iomux-v3.h> +#include <mach/gpio.h> +#include <mach/irqs.h> + +static struct map_desc mx31_io_desc[] __initdata = { + imx_map_entry(MX31, X_MEMC, MT_DEVICE), + imx_map_entry(MX31, AVIC, MT_DEVICE_NONSHARED), + imx_map_entry(MX31, AIPS1, MT_DEVICE_NONSHARED), + imx_map_entry(MX31, AIPS2, MT_DEVICE_NONSHARED), + imx_map_entry(MX31, SPBA0, MT_DEVICE_NONSHARED), +}; + +/* + * This function initializes the memory map. It is called during the + * system startup to create static physical to virtual memory mappings + * for the IO modules. + */ +void __init mx31_map_io(void) +{ + iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc)); +} + +void __init imx31_init_early(void) +{ + mxc_set_cpu_type(MXC_CPU_MX31); + mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR)); +} + +static struct mxc_gpio_port imx31_gpio_ports[] = { + DEFINE_IMX_GPIO_PORT_IRQ(MX31, 0, 1, MX31_INT_GPIO1), + DEFINE_IMX_GPIO_PORT_IRQ(MX31, 1, 2, MX31_INT_GPIO2), + DEFINE_IMX_GPIO_PORT_IRQ(MX31, 2, 3, MX31_INT_GPIO3), +}; + +void __init mx31_init_irq(void) +{ + mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR)); + mxc_gpio_init(imx31_gpio_ports, ARRAY_SIZE(imx31_gpio_ports)); +} diff --git a/arch/arm/mach-imx/mm-imx35.c b/arch/arm/mach-imx/mm-imx35.c new file mode 100644 index 0000000..c880e6d --- /dev/null +++ b/arch/arm/mach-imx/mm-imx35.c @@ -0,0 +1,63 @@ +/* + * Copyright (C) 1999,2000 Arm Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * - add MX31 specific definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/err.h> + +#include <asm/pgtable.h> +#include <asm/mach/map.h> +#include <asm/hardware/cache-l2x0.h> + +#include <mach/common.h> +#include <mach/hardware.h> +#include <mach/iomux-v3.h> +#include <mach/gpio.h> +#include <mach/irqs.h> + +static struct map_desc mx35_io_desc[] __initdata = { + imx_map_entry(MX35, X_MEMC, MT_DEVICE), + imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED), + imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED), + imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED), + imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED), +}; + +void __init mx35_map_io(void) +{ + iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc)); +} + +void __init imx35_init_early(void) +{ + mxc_set_cpu_type(MXC_CPU_MX35); + mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR)); + mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR)); +} + +static struct mxc_gpio_port imx35_gpio_ports[] = { + DEFINE_IMX_GPIO_PORT_IRQ(MX35, 0, 1, MX35_INT_GPIO1), + DEFINE_IMX_GPIO_PORT_IRQ(MX35, 1, 2, MX35_INT_GPIO2), + DEFINE_IMX_GPIO_PORT_IRQ(MX35, 2, 3, MX35_INT_GPIO3), +}; + +void __init mx35_init_irq(void) +{ + mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR)); + mxc_gpio_init(imx35_gpio_ports, ARRAY_SIZE(imx35_gpio_ports)); +} diff --git a/arch/arm/mach-mx3/mx31lilly-db.c b/arch/arm/mach-imx/mx31lilly-db.c index 8f1a38e..7d26f76 100644 --- a/arch/arm/mach-mx3/mx31lilly-db.c +++ b/arch/arm/mach-imx/mx31lilly-db.c @@ -34,11 +34,8 @@ #include <mach/common.h> #include <mach/iomux-mx3.h> #include <mach/board-mx31lilly.h> -#include <mach/mx3fb.h> -#include <mach/ipu.h> #include "devices-imx31.h" -#include "devices.h" /* * This file contains board-specific initialization routines for the @@ -164,13 +161,13 @@ static const struct imxmmc_platform_data mmc_pdata __initconst = { }; /* Framebuffer support */ -static struct ipu_platform_data ipu_data __initdata = { +static const struct ipu_platform_data ipu_data __initconst = { .irq_base = MXC_IPU_IRQ_START, }; static const struct fb_videomode fb_modedb = { /* 640x480 TFT panel (IPS-056T) */ - .name = "CRT-VGA", + .name = "CRT-VGA", .refresh = 64, .xres = 640, .yres = 480, @@ -187,7 +184,6 @@ static const struct fb_videomode fb_modedb = { }; static struct mx3fb_platform_data fb_pdata __initdata = { - .dma_dev = &mx3_ipu.dev, .name = "CRT-VGA", .mode = &fb_modedb, .num_modes = 1, @@ -202,8 +198,8 @@ static void __init mx31lilly_init_fb(void) return; } - mxc_register_device(&mx3_ipu, &ipu_data); - mxc_register_device(&mx3_fb, &fb_pdata); + imx31_add_ipu_core(&ipu_data); + imx31_add_mx3_sdc_fb(&fb_pdata); gpio_direction_output(LCD_VCC_EN_GPIO, 1); } @@ -218,4 +214,3 @@ void __init mx31lilly_db_init(void) imx31_add_mxc_mmc(0, &mmc_pdata); mx31lilly_init_fb(); } - diff --git a/arch/arm/mach-mx3/mx31lite-db.c b/arch/arm/mach-imx/mx31lite-db.c index 3124ea8..5aa053e 100644 --- a/arch/arm/mach-mx3/mx31lite-db.c +++ b/arch/arm/mach-imx/mx31lite-db.c @@ -37,7 +37,6 @@ #include <mach/board-mx31lite.h> #include "devices-imx31.h" -#include "devices.h" /* * This file contains board-specific initialization routines for the @@ -200,5 +199,5 @@ void __init mx31lite_db_init(void) imx31_add_spi_imx0(&spi0_pdata); platform_device_register(&litekit_led_device); imx31_add_imx2_wdt(NULL); - mxc_register_device(&imx_rtc_device0, NULL); + imx31_add_mxc_rtc(NULL); } diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-imx/mx31moboard-devboard.c index 6410b9c..0aa2536 100644 --- a/arch/arm/mach-mx3/mx31moboard-devboard.c +++ b/arch/arm/mach-imx/mx31moboard-devboard.c @@ -28,7 +28,6 @@ #include <mach/ulpi.h> #include "devices-imx31.h" -#include "devices.h" static unsigned int devboard_pins[] = { /* UART1 */ diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-imx/mx31moboard-marxbot.c index 57f7b00..bb639cb 100644 --- a/arch/arm/mach-mx3/mx31moboard-marxbot.c +++ b/arch/arm/mach-imx/mx31moboard-marxbot.c @@ -26,14 +26,12 @@ #include <mach/common.h> #include <mach/hardware.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx3.h> #include <mach/ulpi.h> #include <media/soc_camera.h> #include "devices-imx31.h" -#include "devices.h" static unsigned int marxbot_pins[] = { /* SDHC2 */ diff --git a/arch/arm/mach-mx3/mx31moboard-smartbot.c b/arch/arm/mach-imx/mx31moboard-smartbot.c index 35f806e..fabb801 100644 --- a/arch/arm/mach-mx3/mx31moboard-smartbot.c +++ b/arch/arm/mach-imx/mx31moboard-smartbot.c @@ -32,7 +32,6 @@ #include <media/soc_camera.h> #include "devices-imx31.h" -#include "devices.h" static unsigned int smartbot_pins[] = { /* UART1 */ diff --git a/arch/arm/mach-mx3/pcm037.h b/arch/arm/mach-imx/pcm037.h index d692972..d692972 100644 --- a/arch/arm/mach-mx3/pcm037.h +++ b/arch/arm/mach-imx/pcm037.h diff --git a/arch/arm/mach-iop32x/include/mach/uncompress.h b/arch/arm/mach-iop32x/include/mach/uncompress.h index b247551..4fd7154 100644 --- a/arch/arm/mach-iop32x/include/mach/uncompress.h +++ b/arch/arm/mach-iop32x/include/mach/uncompress.h @@ -7,7 +7,7 @@ #include <linux/serial_reg.h> #include <mach/hardware.h> -static volatile u8 *uart_base; +volatile u8 *uart_base; #define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE) diff --git a/arch/arm/mach-iop33x/include/mach/uncompress.h b/arch/arm/mach-iop33x/include/mach/uncompress.h index b42423f..f99bb84 100644 --- a/arch/arm/mach-iop33x/include/mach/uncompress.h +++ b/arch/arm/mach-iop33x/include/mach/uncompress.h @@ -7,7 +7,7 @@ #include <linux/serial_reg.h> #include <mach/hardware.h> -static volatile u32 *uart_base; +volatile u32 *uart_base; #define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE) diff --git a/arch/arm/mach-ixp4xx/include/mach/uncompress.h b/arch/arm/mach-ixp4xx/include/mach/uncompress.h index 2db0078..219d7c1 100644 --- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h +++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h @@ -19,7 +19,7 @@ #define TX_DONE (UART_LSR_TEMT|UART_LSR_THRE) -static volatile u32* uart_base; +volatile u32* uart_base; static inline void putc(int c) { diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 20e71df..f3248cf 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -13,11 +13,9 @@ #include <linux/platform_device.h> #include <linux/serial_8250.h> #include <linux/mbus.h> -#include <linux/mv643xx_eth.h> -#include <linux/mv643xx_i2c.h> #include <linux/ata_platform.h> #include <linux/mtd/nand.h> -#include <linux/spi/orion_spi.h> +#include <linux/dma-mapping.h> #include <net/dsa.h> #include <asm/page.h> #include <asm/timex.h> @@ -28,11 +26,9 @@ #include <mach/bridge-regs.h> #include <plat/audio.h> #include <plat/cache-feroceon-l2.h> -#include <plat/ehci-orion.h> #include <plat/mvsdio.h> -#include <plat/mv_xor.h> #include <plat/orion_nand.h> -#include <plat/orion_wdt.h> +#include <plat/common.h> #include <plat/time.h> #include "common.h" @@ -69,210 +65,52 @@ void __init kirkwood_map_io(void) * registered. Some reserved bits must be set to 1. */ unsigned int kirkwood_clk_ctrl = CGC_DUNIT | CGC_RESERVED; - - -/***************************************************************************** - * EHCI - ****************************************************************************/ -static struct orion_ehci_data kirkwood_ehci_data = { - .dram = &kirkwood_mbus_dram_info, - .phy_version = EHCI_PHY_NA, -}; - -static u64 ehci_dmamask = 0xffffffffUL; /***************************************************************************** * EHCI0 ****************************************************************************/ -static struct resource kirkwood_ehci_resources[] = { - { - .start = USB_PHYS_BASE, - .end = USB_PHYS_BASE + 0x0fff, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_KIRKWOOD_USB, - .end = IRQ_KIRKWOOD_USB, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device kirkwood_ehci = { - .name = "orion-ehci", - .id = 0, - .dev = { - .dma_mask = &ehci_dmamask, - .coherent_dma_mask = 0xffffffff, - .platform_data = &kirkwood_ehci_data, - }, - .resource = kirkwood_ehci_resources, - .num_resources = ARRAY_SIZE(kirkwood_ehci_resources), -}; - void __init kirkwood_ehci_init(void) { kirkwood_clk_ctrl |= CGC_USB0; - platform_device_register(&kirkwood_ehci); + orion_ehci_init(&kirkwood_mbus_dram_info, + USB_PHYS_BASE, IRQ_KIRKWOOD_USB); } /***************************************************************************** * GE00 ****************************************************************************/ -struct mv643xx_eth_shared_platform_data kirkwood_ge00_shared_data = { - .dram = &kirkwood_mbus_dram_info, -}; - -static struct resource kirkwood_ge00_shared_resources[] = { - { - .name = "ge00 base", - .start = GE00_PHYS_BASE + 0x2000, - .end = GE00_PHYS_BASE + 0x3fff, - .flags = IORESOURCE_MEM, - }, { - .name = "ge00 err irq", - .start = IRQ_KIRKWOOD_GE00_ERR, - .end = IRQ_KIRKWOOD_GE00_ERR, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device kirkwood_ge00_shared = { - .name = MV643XX_ETH_SHARED_NAME, - .id = 0, - .dev = { - .platform_data = &kirkwood_ge00_shared_data, - }, - .num_resources = ARRAY_SIZE(kirkwood_ge00_shared_resources), - .resource = kirkwood_ge00_shared_resources, -}; - -static struct resource kirkwood_ge00_resources[] = { - { - .name = "ge00 irq", - .start = IRQ_KIRKWOOD_GE00_SUM, - .end = IRQ_KIRKWOOD_GE00_SUM, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device kirkwood_ge00 = { - .name = MV643XX_ETH_NAME, - .id = 0, - .num_resources = 1, - .resource = kirkwood_ge00_resources, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, -}; - void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data) { kirkwood_clk_ctrl |= CGC_GE0; - eth_data->shared = &kirkwood_ge00_shared; - kirkwood_ge00.dev.platform_data = eth_data; - platform_device_register(&kirkwood_ge00_shared); - platform_device_register(&kirkwood_ge00); + orion_ge00_init(eth_data, &kirkwood_mbus_dram_info, + GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM, + IRQ_KIRKWOOD_GE00_ERR, kirkwood_tclk); } /***************************************************************************** * GE01 ****************************************************************************/ -struct mv643xx_eth_shared_platform_data kirkwood_ge01_shared_data = { - .dram = &kirkwood_mbus_dram_info, - .shared_smi = &kirkwood_ge00_shared, -}; - -static struct resource kirkwood_ge01_shared_resources[] = { - { - .name = "ge01 base", - .start = GE01_PHYS_BASE + 0x2000, - .end = GE01_PHYS_BASE + 0x3fff, - .flags = IORESOURCE_MEM, - }, { - .name = "ge01 err irq", - .start = IRQ_KIRKWOOD_GE01_ERR, - .end = IRQ_KIRKWOOD_GE01_ERR, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device kirkwood_ge01_shared = { - .name = MV643XX_ETH_SHARED_NAME, - .id = 1, - .dev = { - .platform_data = &kirkwood_ge01_shared_data, - }, - .num_resources = ARRAY_SIZE(kirkwood_ge01_shared_resources), - .resource = kirkwood_ge01_shared_resources, -}; - -static struct resource kirkwood_ge01_resources[] = { - { - .name = "ge01 irq", - .start = IRQ_KIRKWOOD_GE01_SUM, - .end = IRQ_KIRKWOOD_GE01_SUM, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device kirkwood_ge01 = { - .name = MV643XX_ETH_NAME, - .id = 1, - .num_resources = 1, - .resource = kirkwood_ge01_resources, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, -}; - void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data) { + kirkwood_clk_ctrl |= CGC_GE1; - eth_data->shared = &kirkwood_ge01_shared; - kirkwood_ge01.dev.platform_data = eth_data; - platform_device_register(&kirkwood_ge01_shared); - platform_device_register(&kirkwood_ge01); + orion_ge01_init(eth_data, &kirkwood_mbus_dram_info, + GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM, + IRQ_KIRKWOOD_GE01_ERR, kirkwood_tclk); } /***************************************************************************** * Ethernet switch ****************************************************************************/ -static struct resource kirkwood_switch_resources[] = { - { - .start = 0, - .end = 0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device kirkwood_switch_device = { - .name = "dsa", - .id = 0, - .num_resources = 0, - .resource = kirkwood_switch_resources, -}; - void __init kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq) { - int i; - - if (irq != NO_IRQ) { - kirkwood_switch_resources[0].start = irq; - kirkwood_switch_resources[0].end = irq; - kirkwood_switch_device.num_resources = 1; - } - - d->netdev = &kirkwood_ge00.dev; - for (i = 0; i < d->nr_chips; i++) - d->chip[i].mii_bus = &kirkwood_ge00_shared.dev; - kirkwood_switch_device.dev.platform_data = d; - - platform_device_register(&kirkwood_switch_device); + orion_ge00_switch_init(d, irq); } @@ -325,53 +163,23 @@ void __init kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts, /***************************************************************************** * SoC RTC ****************************************************************************/ -static struct resource kirkwood_rtc_resource = { - .start = RTC_PHYS_BASE, - .end = RTC_PHYS_BASE + SZ_16 - 1, - .flags = IORESOURCE_MEM, -}; - static void __init kirkwood_rtc_init(void) { - platform_device_register_simple("rtc-mv", -1, &kirkwood_rtc_resource, 1); + orion_rtc_init(RTC_PHYS_BASE, IRQ_KIRKWOOD_RTC); } /***************************************************************************** * SATA ****************************************************************************/ -static struct resource kirkwood_sata_resources[] = { - { - .name = "sata base", - .start = SATA_PHYS_BASE, - .end = SATA_PHYS_BASE + 0x5000 - 1, - .flags = IORESOURCE_MEM, - }, { - .name = "sata irq", - .start = IRQ_KIRKWOOD_SATA, - .end = IRQ_KIRKWOOD_SATA, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device kirkwood_sata = { - .name = "sata_mv", - .id = 0, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(kirkwood_sata_resources), - .resource = kirkwood_sata_resources, -}; - void __init kirkwood_sata_init(struct mv_sata_platform_data *sata_data) { kirkwood_clk_ctrl |= CGC_SATA0; if (sata_data->n_ports > 1) kirkwood_clk_ctrl |= CGC_SATA1; - sata_data->dram = &kirkwood_mbus_dram_info; - kirkwood_sata.dev.platform_data = sata_data; - platform_device_register(&kirkwood_sata); + + orion_sata_init(sata_data, &kirkwood_mbus_dram_info, + SATA_PHYS_BASE, IRQ_KIRKWOOD_SATA); } @@ -391,14 +199,14 @@ static struct resource mvsdio_resources[] = { }, }; -static u64 mvsdio_dmamask = 0xffffffffUL; +static u64 mvsdio_dmamask = DMA_BIT_MASK(32); static struct platform_device kirkwood_sdio = { .name = "mvsdio", .id = -1, .dev = { .dma_mask = &mvsdio_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), }, .num_resources = ARRAY_SIZE(mvsdio_resources), .resource = mvsdio_resources, @@ -423,424 +231,84 @@ void __init kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data) /***************************************************************************** * SPI ****************************************************************************/ -static struct orion_spi_info kirkwood_spi_plat_data = { -}; - -static struct resource kirkwood_spi_resources[] = { - { - .start = SPI_PHYS_BASE, - .end = SPI_PHYS_BASE + SZ_512 - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device kirkwood_spi = { - .name = "orion_spi", - .id = 0, - .resource = kirkwood_spi_resources, - .dev = { - .platform_data = &kirkwood_spi_plat_data, - }, - .num_resources = ARRAY_SIZE(kirkwood_spi_resources), -}; - void __init kirkwood_spi_init() { kirkwood_clk_ctrl |= CGC_RUNIT; - platform_device_register(&kirkwood_spi); + orion_spi_init(SPI_PHYS_BASE, kirkwood_tclk); } /***************************************************************************** * I2C ****************************************************************************/ -static struct mv64xxx_i2c_pdata kirkwood_i2c_pdata = { - .freq_m = 8, /* assumes 166 MHz TCLK */ - .freq_n = 3, - .timeout = 1000, /* Default timeout of 1 second */ -}; - -static struct resource kirkwood_i2c_resources[] = { - { - .start = I2C_PHYS_BASE, - .end = I2C_PHYS_BASE + 0x1f, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_KIRKWOOD_TWSI, - .end = IRQ_KIRKWOOD_TWSI, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device kirkwood_i2c = { - .name = MV64XXX_I2C_CTLR_NAME, - .id = 0, - .num_resources = ARRAY_SIZE(kirkwood_i2c_resources), - .resource = kirkwood_i2c_resources, - .dev = { - .platform_data = &kirkwood_i2c_pdata, - }, -}; - void __init kirkwood_i2c_init(void) { - platform_device_register(&kirkwood_i2c); + orion_i2c_init(I2C_PHYS_BASE, IRQ_KIRKWOOD_TWSI, 8); } /***************************************************************************** * UART0 ****************************************************************************/ -static struct plat_serial8250_port kirkwood_uart0_data[] = { - { - .mapbase = UART0_PHYS_BASE, - .membase = (char *)UART0_VIRT_BASE, - .irq = IRQ_KIRKWOOD_UART_0, - .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = 0, - }, { - }, -}; - -static struct resource kirkwood_uart0_resources[] = { - { - .start = UART0_PHYS_BASE, - .end = UART0_PHYS_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_KIRKWOOD_UART_0, - .end = IRQ_KIRKWOOD_UART_0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device kirkwood_uart0 = { - .name = "serial8250", - .id = 0, - .dev = { - .platform_data = kirkwood_uart0_data, - }, - .resource = kirkwood_uart0_resources, - .num_resources = ARRAY_SIZE(kirkwood_uart0_resources), -}; void __init kirkwood_uart0_init(void) { - platform_device_register(&kirkwood_uart0); + orion_uart0_init(UART0_VIRT_BASE, UART0_PHYS_BASE, + IRQ_KIRKWOOD_UART_0, kirkwood_tclk); } /***************************************************************************** * UART1 ****************************************************************************/ -static struct plat_serial8250_port kirkwood_uart1_data[] = { - { - .mapbase = UART1_PHYS_BASE, - .membase = (char *)UART1_VIRT_BASE, - .irq = IRQ_KIRKWOOD_UART_1, - .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = 0, - }, { - }, -}; - -static struct resource kirkwood_uart1_resources[] = { - { - .start = UART1_PHYS_BASE, - .end = UART1_PHYS_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_KIRKWOOD_UART_1, - .end = IRQ_KIRKWOOD_UART_1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device kirkwood_uart1 = { - .name = "serial8250", - .id = 1, - .dev = { - .platform_data = kirkwood_uart1_data, - }, - .resource = kirkwood_uart1_resources, - .num_resources = ARRAY_SIZE(kirkwood_uart1_resources), -}; - void __init kirkwood_uart1_init(void) { - platform_device_register(&kirkwood_uart1); + orion_uart1_init(UART1_VIRT_BASE, UART1_PHYS_BASE, + IRQ_KIRKWOOD_UART_1, kirkwood_tclk); } - /***************************************************************************** * Cryptographic Engines and Security Accelerator (CESA) ****************************************************************************/ - -static struct resource kirkwood_crypto_res[] = { - { - .name = "regs", - .start = CRYPTO_PHYS_BASE, - .end = CRYPTO_PHYS_BASE + 0xffff, - .flags = IORESOURCE_MEM, - }, { - .name = "sram", - .start = KIRKWOOD_SRAM_PHYS_BASE, - .end = KIRKWOOD_SRAM_PHYS_BASE + KIRKWOOD_SRAM_SIZE - 1, - .flags = IORESOURCE_MEM, - }, { - .name = "crypto interrupt", - .start = IRQ_KIRKWOOD_CRYPTO, - .end = IRQ_KIRKWOOD_CRYPTO, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device kirkwood_crypto_device = { - .name = "mv_crypto", - .id = -1, - .num_resources = ARRAY_SIZE(kirkwood_crypto_res), - .resource = kirkwood_crypto_res, -}; - void __init kirkwood_crypto_init(void) { kirkwood_clk_ctrl |= CGC_CRYPTO; - platform_device_register(&kirkwood_crypto_device); + orion_crypto_init(CRYPTO_PHYS_BASE, KIRKWOOD_SRAM_PHYS_BASE, + KIRKWOOD_SRAM_SIZE, IRQ_KIRKWOOD_CRYPTO); } /***************************************************************************** - * XOR - ****************************************************************************/ -static struct mv_xor_platform_shared_data kirkwood_xor_shared_data = { - .dram = &kirkwood_mbus_dram_info, -}; - -static u64 kirkwood_xor_dmamask = DMA_BIT_MASK(32); - - -/***************************************************************************** * XOR0 ****************************************************************************/ -static struct resource kirkwood_xor0_shared_resources[] = { - { - .name = "xor 0 low", - .start = XOR0_PHYS_BASE, - .end = XOR0_PHYS_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, { - .name = "xor 0 high", - .start = XOR0_HIGH_PHYS_BASE, - .end = XOR0_HIGH_PHYS_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device kirkwood_xor0_shared = { - .name = MV_XOR_SHARED_NAME, - .id = 0, - .dev = { - .platform_data = &kirkwood_xor_shared_data, - }, - .num_resources = ARRAY_SIZE(kirkwood_xor0_shared_resources), - .resource = kirkwood_xor0_shared_resources, -}; - -static struct resource kirkwood_xor00_resources[] = { - [0] = { - .start = IRQ_KIRKWOOD_XOR_00, - .end = IRQ_KIRKWOOD_XOR_00, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct mv_xor_platform_data kirkwood_xor00_data = { - .shared = &kirkwood_xor0_shared, - .hw_id = 0, - .pool_size = PAGE_SIZE, -}; - -static struct platform_device kirkwood_xor00_channel = { - .name = MV_XOR_NAME, - .id = 0, - .num_resources = ARRAY_SIZE(kirkwood_xor00_resources), - .resource = kirkwood_xor00_resources, - .dev = { - .dma_mask = &kirkwood_xor_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(64), - .platform_data = &kirkwood_xor00_data, - }, -}; - -static struct resource kirkwood_xor01_resources[] = { - [0] = { - .start = IRQ_KIRKWOOD_XOR_01, - .end = IRQ_KIRKWOOD_XOR_01, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct mv_xor_platform_data kirkwood_xor01_data = { - .shared = &kirkwood_xor0_shared, - .hw_id = 1, - .pool_size = PAGE_SIZE, -}; - -static struct platform_device kirkwood_xor01_channel = { - .name = MV_XOR_NAME, - .id = 1, - .num_resources = ARRAY_SIZE(kirkwood_xor01_resources), - .resource = kirkwood_xor01_resources, - .dev = { - .dma_mask = &kirkwood_xor_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(64), - .platform_data = &kirkwood_xor01_data, - }, -}; - static void __init kirkwood_xor0_init(void) { kirkwood_clk_ctrl |= CGC_XOR0; - platform_device_register(&kirkwood_xor0_shared); - /* - * two engines can't do memset simultaneously, this limitation - * satisfied by removing memset support from one of the engines. - */ - dma_cap_set(DMA_MEMCPY, kirkwood_xor00_data.cap_mask); - dma_cap_set(DMA_XOR, kirkwood_xor00_data.cap_mask); - platform_device_register(&kirkwood_xor00_channel); - - dma_cap_set(DMA_MEMCPY, kirkwood_xor01_data.cap_mask); - dma_cap_set(DMA_MEMSET, kirkwood_xor01_data.cap_mask); - dma_cap_set(DMA_XOR, kirkwood_xor01_data.cap_mask); - platform_device_register(&kirkwood_xor01_channel); + orion_xor0_init(&kirkwood_mbus_dram_info, + XOR0_PHYS_BASE, XOR0_HIGH_PHYS_BASE, + IRQ_KIRKWOOD_XOR_00, IRQ_KIRKWOOD_XOR_01); } /***************************************************************************** * XOR1 ****************************************************************************/ -static struct resource kirkwood_xor1_shared_resources[] = { - { - .name = "xor 1 low", - .start = XOR1_PHYS_BASE, - .end = XOR1_PHYS_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, { - .name = "xor 1 high", - .start = XOR1_HIGH_PHYS_BASE, - .end = XOR1_HIGH_PHYS_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device kirkwood_xor1_shared = { - .name = MV_XOR_SHARED_NAME, - .id = 1, - .dev = { - .platform_data = &kirkwood_xor_shared_data, - }, - .num_resources = ARRAY_SIZE(kirkwood_xor1_shared_resources), - .resource = kirkwood_xor1_shared_resources, -}; - -static struct resource kirkwood_xor10_resources[] = { - [0] = { - .start = IRQ_KIRKWOOD_XOR_10, - .end = IRQ_KIRKWOOD_XOR_10, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct mv_xor_platform_data kirkwood_xor10_data = { - .shared = &kirkwood_xor1_shared, - .hw_id = 0, - .pool_size = PAGE_SIZE, -}; - -static struct platform_device kirkwood_xor10_channel = { - .name = MV_XOR_NAME, - .id = 2, - .num_resources = ARRAY_SIZE(kirkwood_xor10_resources), - .resource = kirkwood_xor10_resources, - .dev = { - .dma_mask = &kirkwood_xor_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(64), - .platform_data = &kirkwood_xor10_data, - }, -}; - -static struct resource kirkwood_xor11_resources[] = { - [0] = { - .start = IRQ_KIRKWOOD_XOR_11, - .end = IRQ_KIRKWOOD_XOR_11, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct mv_xor_platform_data kirkwood_xor11_data = { - .shared = &kirkwood_xor1_shared, - .hw_id = 1, - .pool_size = PAGE_SIZE, -}; - -static struct platform_device kirkwood_xor11_channel = { - .name = MV_XOR_NAME, - .id = 3, - .num_resources = ARRAY_SIZE(kirkwood_xor11_resources), - .resource = kirkwood_xor11_resources, - .dev = { - .dma_mask = &kirkwood_xor_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(64), - .platform_data = &kirkwood_xor11_data, - }, -}; - static void __init kirkwood_xor1_init(void) { kirkwood_clk_ctrl |= CGC_XOR1; - platform_device_register(&kirkwood_xor1_shared); - /* - * two engines can't do memset simultaneously, this limitation - * satisfied by removing memset support from one of the engines. - */ - dma_cap_set(DMA_MEMCPY, kirkwood_xor10_data.cap_mask); - dma_cap_set(DMA_XOR, kirkwood_xor10_data.cap_mask); - platform_device_register(&kirkwood_xor10_channel); - - dma_cap_set(DMA_MEMCPY, kirkwood_xor11_data.cap_mask); - dma_cap_set(DMA_MEMSET, kirkwood_xor11_data.cap_mask); - dma_cap_set(DMA_XOR, kirkwood_xor11_data.cap_mask); - platform_device_register(&kirkwood_xor11_channel); + orion_xor1_init(XOR1_PHYS_BASE, XOR1_HIGH_PHYS_BASE, + IRQ_KIRKWOOD_XOR_10, IRQ_KIRKWOOD_XOR_11); } /***************************************************************************** * Watchdog ****************************************************************************/ -static struct orion_wdt_platform_data kirkwood_wdt_data = { - .tclk = 0, -}; - -static struct platform_device kirkwood_wdt_device = { - .name = "orion_wdt", - .id = -1, - .dev = { - .platform_data = &kirkwood_wdt_data, - }, - .num_resources = 0, -}; - static void __init kirkwood_wdt_init(void) { - kirkwood_wdt_data.tclk = kirkwood_tclk; - platform_device_register(&kirkwood_wdt_device); + orion_wdt_init(kirkwood_tclk); } @@ -984,11 +452,6 @@ void __init kirkwood_init(void) { printk(KERN_INFO "Kirkwood: %s, TCLK=%d.\n", kirkwood_id(), kirkwood_tclk); - kirkwood_ge00_shared_data.t_clk = kirkwood_tclk; - kirkwood_ge01_shared_data.t_clk = kirkwood_tclk; - kirkwood_spi_plat_data.tclk = kirkwood_tclk; - kirkwood_uart0_data[0].uartclk = kirkwood_tclk; - kirkwood_uart1_data[0].uartclk = kirkwood_tclk; kirkwood_i2s_data.tclk = kirkwood_tclk; /* diff --git a/arch/arm/mach-kirkwood/include/mach/irqs.h b/arch/arm/mach-kirkwood/include/mach/irqs.h index 9da2eb5..2bf8161 100644 --- a/arch/arm/mach-kirkwood/include/mach/irqs.h +++ b/arch/arm/mach-kirkwood/include/mach/irqs.h @@ -51,6 +51,7 @@ #define IRQ_KIRKWOOD_GPIO_HIGH_16_23 41 #define IRQ_KIRKWOOD_GE00_ERR 46 #define IRQ_KIRKWOOD_GE01_ERR 47 +#define IRQ_KIRKWOOD_RTC 53 /* * KIRKWOOD General Purpose Pins diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c index 7ce2018..b0a7d97 100644 --- a/arch/arm/mach-kirkwood/mpp.c +++ b/arch/arm/mach-kirkwood/mpp.c @@ -14,6 +14,7 @@ #include <linux/io.h> #include <asm/gpio.h> #include <mach/hardware.h> +#include <plat/mpp.h> #include "common.h" #include "mpp.h" @@ -36,61 +37,8 @@ static unsigned int __init kirkwood_variant(void) return 0; } -#define MPP_CTRL(i) (DEV_BUS_VIRT_BASE + (i) * 4) -#define MPP_NR_REGS (1 + MPP_MAX/8) - void __init kirkwood_mpp_conf(unsigned int *mpp_list) { - u32 mpp_ctrl[MPP_NR_REGS]; - unsigned int variant_mask; - int i; - - variant_mask = kirkwood_variant(); - if (!variant_mask) - return; - - printk(KERN_DEBUG "initial MPP regs:"); - for (i = 0; i < MPP_NR_REGS; i++) { - mpp_ctrl[i] = readl(MPP_CTRL(i)); - printk(" %08x", mpp_ctrl[i]); - } - printk("\n"); - - for ( ; *mpp_list; mpp_list++) { - unsigned int num = MPP_NUM(*mpp_list); - unsigned int sel = MPP_SEL(*mpp_list); - int shift, gpio_mode; - - if (num > MPP_MAX) { - printk(KERN_ERR "kirkwood_mpp_conf: invalid MPP " - "number (%u)\n", num); - continue; - } - if (!(*mpp_list & variant_mask)) { - printk(KERN_WARNING - "kirkwood_mpp_conf: requested MPP%u config " - "unavailable on this hardware\n", num); - continue; - } - - shift = (num & 7) << 2; - mpp_ctrl[num / 8] &= ~(0xf << shift); - mpp_ctrl[num / 8] |= sel << shift; - - gpio_mode = 0; - if (*mpp_list & MPP_INPUT_MASK) - gpio_mode |= GPIO_INPUT_OK; - if (*mpp_list & MPP_OUTPUT_MASK) - gpio_mode |= GPIO_OUTPUT_OK; - if (sel != 0) - gpio_mode = 0; - orion_gpio_set_valid(num, gpio_mode); - } - - printk(KERN_DEBUG " final MPP regs:"); - for (i = 0; i < MPP_NR_REGS; i++) { - writel(mpp_ctrl[i], MPP_CTRL(i)); - printk(" %08x", mpp_ctrl[i]); - } - printk("\n"); + orion_mpp_conf(mpp_list, kirkwood_variant(), + MPP_MAX, DEV_BUS_VIRT_BASE); } diff --git a/arch/arm/mach-kirkwood/mpp.h b/arch/arm/mach-kirkwood/mpp.h index 9b0a94d..ac78795 100644 --- a/arch/arm/mach-kirkwood/mpp.h +++ b/arch/arm/mach-kirkwood/mpp.h @@ -22,14 +22,8 @@ /* available on F6281 */ ((!!(_F6281)) << 17) | \ /* available on F6282 */ ((!!(_F6282)) << 18)) -#define MPP_NUM(x) ((x) & 0xff) -#define MPP_SEL(x) (((x) >> 8) & 0xf) - /* num sel i o 6180 6190 6192 6281 6282 */ -#define MPP_INPUT_MASK MPP( 0, 0x0, 1, 0, 0, 0, 0, 0, 0 ) -#define MPP_OUTPUT_MASK MPP( 0, 0x0, 0, 1, 0, 0, 0, 0, 0 ) - #define MPP_F6180_MASK MPP( 0, 0x0, 0, 0, 1, 0, 0, 0, 0 ) #define MPP_F6190_MASK MPP( 0, 0x0, 0, 0, 0, 1, 0, 0, 0 ) #define MPP_F6192_MASK MPP( 0, 0x0, 0, 0, 0, 0, 1, 0, 0 ) diff --git a/arch/arm/mach-loki/common.c b/arch/arm/mach-loki/common.c index e41e909..5f02664 100644 --- a/arch/arm/mach-loki/common.c +++ b/arch/arm/mach-loki/common.c @@ -13,7 +13,7 @@ #include <linux/platform_device.h> #include <linux/serial_8250.h> #include <linux/mbus.h> -#include <linux/mv643xx_eth.h> +#include <linux/dma-mapping.h> #include <asm/page.h> #include <asm/timex.h> #include <asm/mach/map.h> @@ -22,6 +22,7 @@ #include <mach/loki.h> #include <plat/orion_nand.h> #include <plat/time.h> +#include <plat/common.h> #include "common.h" /***************************************************************************** @@ -43,116 +44,28 @@ void __init loki_map_io(void) /***************************************************************************** - * GE0 + * GE00 ****************************************************************************/ -struct mv643xx_eth_shared_platform_data loki_ge0_shared_data = { - .t_clk = LOKI_TCLK, - .dram = &loki_mbus_dram_info, -}; - -static struct resource loki_ge0_shared_resources[] = { - { - .name = "ge0 base", - .start = GE0_PHYS_BASE + 0x2000, - .end = GE0_PHYS_BASE + 0x3fff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device loki_ge0_shared = { - .name = MV643XX_ETH_SHARED_NAME, - .id = 0, - .dev = { - .platform_data = &loki_ge0_shared_data, - }, - .num_resources = 1, - .resource = loki_ge0_shared_resources, -}; - -static struct resource loki_ge0_resources[] = { - { - .name = "ge0 irq", - .start = IRQ_LOKI_GBE_A_INT, - .end = IRQ_LOKI_GBE_A_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device loki_ge0 = { - .name = MV643XX_ETH_NAME, - .id = 0, - .num_resources = 1, - .resource = loki_ge0_resources, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, -}; - void __init loki_ge0_init(struct mv643xx_eth_platform_data *eth_data) { - eth_data->shared = &loki_ge0_shared; - loki_ge0.dev.platform_data = eth_data; - writel(0x00079220, GE0_VIRT_BASE + 0x20b0); - platform_device_register(&loki_ge0_shared); - platform_device_register(&loki_ge0); + + orion_ge00_init(eth_data, &loki_mbus_dram_info, + GE0_PHYS_BASE, IRQ_LOKI_GBE_A_INT, + 0, LOKI_TCLK); } /***************************************************************************** - * GE1 + * GE01 ****************************************************************************/ -struct mv643xx_eth_shared_platform_data loki_ge1_shared_data = { - .t_clk = LOKI_TCLK, - .dram = &loki_mbus_dram_info, -}; - -static struct resource loki_ge1_shared_resources[] = { - { - .name = "ge1 base", - .start = GE1_PHYS_BASE + 0x2000, - .end = GE1_PHYS_BASE + 0x3fff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device loki_ge1_shared = { - .name = MV643XX_ETH_SHARED_NAME, - .id = 1, - .dev = { - .platform_data = &loki_ge1_shared_data, - }, - .num_resources = 1, - .resource = loki_ge1_shared_resources, -}; - -static struct resource loki_ge1_resources[] = { - { - .name = "ge1 irq", - .start = IRQ_LOKI_GBE_B_INT, - .end = IRQ_LOKI_GBE_B_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device loki_ge1 = { - .name = MV643XX_ETH_NAME, - .id = 1, - .num_resources = 1, - .resource = loki_ge1_resources, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, -}; - void __init loki_ge1_init(struct mv643xx_eth_platform_data *eth_data) { - eth_data->shared = &loki_ge1_shared; - loki_ge1.dev.platform_data = eth_data; - writel(0x00079220, GE1_VIRT_BASE + 0x20b0); - platform_device_register(&loki_ge1_shared); - platform_device_register(&loki_ge1); + + orion_ge01_init(eth_data, &loki_mbus_dram_info, + GE1_PHYS_BASE, IRQ_LOKI_GBE_B_INT, + 0, LOKI_TCLK); } @@ -187,7 +100,7 @@ static struct platform_device loki_sas = { .name = "mvsas", .id = 0, .dev = { - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), }, .num_resources = ARRAY_SIZE(loki_sas_resources), .resource = loki_sas_resources, @@ -203,88 +116,19 @@ void __init loki_sas_init(void) /***************************************************************************** * UART0 ****************************************************************************/ -static struct plat_serial8250_port loki_uart0_data[] = { - { - .mapbase = UART0_PHYS_BASE, - .membase = (char *)UART0_VIRT_BASE, - .irq = IRQ_LOKI_UART0, - .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = LOKI_TCLK, - }, { - }, -}; - -static struct resource loki_uart0_resources[] = { - { - .start = UART0_PHYS_BASE, - .end = UART0_PHYS_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_LOKI_UART0, - .end = IRQ_LOKI_UART0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device loki_uart0 = { - .name = "serial8250", - .id = 0, - .dev = { - .platform_data = loki_uart0_data, - }, - .resource = loki_uart0_resources, - .num_resources = ARRAY_SIZE(loki_uart0_resources), -}; - void __init loki_uart0_init(void) { - platform_device_register(&loki_uart0); + orion_uart0_init(UART0_VIRT_BASE, UART0_PHYS_BASE, + IRQ_LOKI_UART0, LOKI_TCLK); } - /***************************************************************************** * UART1 ****************************************************************************/ -static struct plat_serial8250_port loki_uart1_data[] = { - { - .mapbase = UART1_PHYS_BASE, - .membase = (char *)UART1_VIRT_BASE, - .irq = IRQ_LOKI_UART1, - .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = LOKI_TCLK, - }, { - }, -}; - -static struct resource loki_uart1_resources[] = { - { - .start = UART1_PHYS_BASE, - .end = UART1_PHYS_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_LOKI_UART1, - .end = IRQ_LOKI_UART1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device loki_uart1 = { - .name = "serial8250", - .id = 1, - .dev = { - .platform_data = loki_uart1_data, - }, - .resource = loki_uart1_resources, - .num_resources = ARRAY_SIZE(loki_uart1_resources), -}; - void __init loki_uart1_init(void) { - platform_device_register(&loki_uart1); + orion_uart1_init(UART1_VIRT_BASE, UART1_PHYS_BASE, + IRQ_LOKI_UART1, LOKI_TCLK); } diff --git a/arch/arm/mach-mmp/include/mach/uncompress.h b/arch/arm/mach-mmp/include/mach/uncompress.h index 85bd8a2..d6daeb7 100644 --- a/arch/arm/mach-mmp/include/mach/uncompress.h +++ b/arch/arm/mach-mmp/include/mach/uncompress.h @@ -14,7 +14,7 @@ #define UART2_BASE (APB_PHYS_BASE + 0x17000) #define UART3_BASE (APB_PHYS_BASE + 0x18000) -static volatile unsigned long *UART; +volatile unsigned long *UART; static inline void putc(char c) { diff --git a/arch/arm/mach-msm/gpio-v2.c b/arch/arm/mach-msm/gpio-v2.c index 56a964e..cc9c4fd 100644 --- a/arch/arm/mach-msm/gpio-v2.c +++ b/arch/arm/mach-msm/gpio-v2.c @@ -27,6 +27,9 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/spinlock.h> + +#include <asm/mach/irq.h> + #include <mach/msm_iomap.h> #include "gpiomux.h" @@ -309,8 +312,10 @@ static int msm_gpio_irq_set_type(struct irq_data *d, unsigned int flow_type) */ static void msm_summary_irq_handler(unsigned int irq, struct irq_desc *desc) { - struct irq_data *data = irq_desc_get_irq_data(desc); unsigned long i; + struct irq_chip *chip = irq_desc_get_chip(desc); + + chained_irq_enter(chip, desc); for (i = find_first_bit(msm_gpio.enabled_irqs, NR_GPIO_IRQS); i < NR_GPIO_IRQS; @@ -319,7 +324,8 @@ static void msm_summary_irq_handler(unsigned int irq, struct irq_desc *desc) generic_handle_irq(msm_gpio_to_irq(&msm_gpio.gpio_chip, i)); } - data->chip->irq_ack(data); + + chained_irq_exit(chip, desc); } static int msm_gpio_irq_set_wake(struct irq_data *d, unsigned int on) diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index 44fb4e5..23d3980 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -13,8 +13,6 @@ #include <linux/platform_device.h> #include <linux/serial_8250.h> #include <linux/mbus.h> -#include <linux/mv643xx_eth.h> -#include <linux/mv643xx_i2c.h> #include <linux/ata_platform.h> #include <linux/ethtool.h> #include <asm/mach/map.h> @@ -22,11 +20,12 @@ #include <mach/mv78xx0.h> #include <mach/bridge-regs.h> #include <plat/cache-feroceon-l2.h> -#include <plat/ehci-orion.h> #include <plat/orion_nand.h> #include <plat/time.h> +#include <plat/common.h> #include "common.h" +static int get_tclk(void); /***************************************************************************** * Common bits @@ -168,285 +167,62 @@ void __init mv78xx0_map_io(void) /***************************************************************************** * EHCI ****************************************************************************/ -static struct orion_ehci_data mv78xx0_ehci_data = { - .dram = &mv78xx0_mbus_dram_info, - .phy_version = EHCI_PHY_NA, -}; - -static u64 ehci_dmamask = 0xffffffffUL; - - -/***************************************************************************** - * EHCI0 - ****************************************************************************/ -static struct resource mv78xx0_ehci0_resources[] = { - { - .start = USB0_PHYS_BASE, - .end = USB0_PHYS_BASE + 0x0fff, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_MV78XX0_USB_0, - .end = IRQ_MV78XX0_USB_0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device mv78xx0_ehci0 = { - .name = "orion-ehci", - .id = 0, - .dev = { - .dma_mask = &ehci_dmamask, - .coherent_dma_mask = 0xffffffff, - .platform_data = &mv78xx0_ehci_data, - }, - .resource = mv78xx0_ehci0_resources, - .num_resources = ARRAY_SIZE(mv78xx0_ehci0_resources), -}; - void __init mv78xx0_ehci0_init(void) { - platform_device_register(&mv78xx0_ehci0); + orion_ehci_init(&mv78xx0_mbus_dram_info, + USB0_PHYS_BASE, IRQ_MV78XX0_USB_0); } /***************************************************************************** * EHCI1 ****************************************************************************/ -static struct resource mv78xx0_ehci1_resources[] = { - { - .start = USB1_PHYS_BASE, - .end = USB1_PHYS_BASE + 0x0fff, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_MV78XX0_USB_1, - .end = IRQ_MV78XX0_USB_1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device mv78xx0_ehci1 = { - .name = "orion-ehci", - .id = 1, - .dev = { - .dma_mask = &ehci_dmamask, - .coherent_dma_mask = 0xffffffff, - .platform_data = &mv78xx0_ehci_data, - }, - .resource = mv78xx0_ehci1_resources, - .num_resources = ARRAY_SIZE(mv78xx0_ehci1_resources), -}; - void __init mv78xx0_ehci1_init(void) { - platform_device_register(&mv78xx0_ehci1); + orion_ehci_1_init(&mv78xx0_mbus_dram_info, + USB1_PHYS_BASE, IRQ_MV78XX0_USB_1); } /***************************************************************************** * EHCI2 ****************************************************************************/ -static struct resource mv78xx0_ehci2_resources[] = { - { - .start = USB2_PHYS_BASE, - .end = USB2_PHYS_BASE + 0x0fff, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_MV78XX0_USB_2, - .end = IRQ_MV78XX0_USB_2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device mv78xx0_ehci2 = { - .name = "orion-ehci", - .id = 2, - .dev = { - .dma_mask = &ehci_dmamask, - .coherent_dma_mask = 0xffffffff, - .platform_data = &mv78xx0_ehci_data, - }, - .resource = mv78xx0_ehci2_resources, - .num_resources = ARRAY_SIZE(mv78xx0_ehci2_resources), -}; - void __init mv78xx0_ehci2_init(void) { - platform_device_register(&mv78xx0_ehci2); + orion_ehci_2_init(&mv78xx0_mbus_dram_info, + USB2_PHYS_BASE, IRQ_MV78XX0_USB_2); } /***************************************************************************** * GE00 ****************************************************************************/ -struct mv643xx_eth_shared_platform_data mv78xx0_ge00_shared_data = { - .t_clk = 0, - .dram = &mv78xx0_mbus_dram_info, -}; - -static struct resource mv78xx0_ge00_shared_resources[] = { - { - .name = "ge00 base", - .start = GE00_PHYS_BASE + 0x2000, - .end = GE00_PHYS_BASE + 0x3fff, - .flags = IORESOURCE_MEM, - }, { - .name = "ge err irq", - .start = IRQ_MV78XX0_GE_ERR, - .end = IRQ_MV78XX0_GE_ERR, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device mv78xx0_ge00_shared = { - .name = MV643XX_ETH_SHARED_NAME, - .id = 0, - .dev = { - .platform_data = &mv78xx0_ge00_shared_data, - }, - .num_resources = ARRAY_SIZE(mv78xx0_ge00_shared_resources), - .resource = mv78xx0_ge00_shared_resources, -}; - -static struct resource mv78xx0_ge00_resources[] = { - { - .name = "ge00 irq", - .start = IRQ_MV78XX0_GE00_SUM, - .end = IRQ_MV78XX0_GE00_SUM, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device mv78xx0_ge00 = { - .name = MV643XX_ETH_NAME, - .id = 0, - .num_resources = 1, - .resource = mv78xx0_ge00_resources, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, -}; - void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data) { - eth_data->shared = &mv78xx0_ge00_shared; - mv78xx0_ge00.dev.platform_data = eth_data; - - platform_device_register(&mv78xx0_ge00_shared); - platform_device_register(&mv78xx0_ge00); + orion_ge00_init(eth_data, &mv78xx0_mbus_dram_info, + GE00_PHYS_BASE, IRQ_MV78XX0_GE00_SUM, + IRQ_MV78XX0_GE_ERR, get_tclk()); } /***************************************************************************** * GE01 ****************************************************************************/ -struct mv643xx_eth_shared_platform_data mv78xx0_ge01_shared_data = { - .t_clk = 0, - .dram = &mv78xx0_mbus_dram_info, - .shared_smi = &mv78xx0_ge00_shared, -}; - -static struct resource mv78xx0_ge01_shared_resources[] = { - { - .name = "ge01 base", - .start = GE01_PHYS_BASE + 0x2000, - .end = GE01_PHYS_BASE + 0x3fff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device mv78xx0_ge01_shared = { - .name = MV643XX_ETH_SHARED_NAME, - .id = 1, - .dev = { - .platform_data = &mv78xx0_ge01_shared_data, - }, - .num_resources = 1, - .resource = mv78xx0_ge01_shared_resources, -}; - -static struct resource mv78xx0_ge01_resources[] = { - { - .name = "ge01 irq", - .start = IRQ_MV78XX0_GE01_SUM, - .end = IRQ_MV78XX0_GE01_SUM, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device mv78xx0_ge01 = { - .name = MV643XX_ETH_NAME, - .id = 1, - .num_resources = 1, - .resource = mv78xx0_ge01_resources, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, -}; - void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data) { - eth_data->shared = &mv78xx0_ge01_shared; - mv78xx0_ge01.dev.platform_data = eth_data; - - platform_device_register(&mv78xx0_ge01_shared); - platform_device_register(&mv78xx0_ge01); + orion_ge01_init(eth_data, &mv78xx0_mbus_dram_info, + GE01_PHYS_BASE, IRQ_MV78XX0_GE01_SUM, + NO_IRQ, get_tclk()); } /***************************************************************************** * GE10 ****************************************************************************/ -struct mv643xx_eth_shared_platform_data mv78xx0_ge10_shared_data = { - .t_clk = 0, - .dram = &mv78xx0_mbus_dram_info, - .shared_smi = &mv78xx0_ge00_shared, -}; - -static struct resource mv78xx0_ge10_shared_resources[] = { - { - .name = "ge10 base", - .start = GE10_PHYS_BASE + 0x2000, - .end = GE10_PHYS_BASE + 0x3fff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device mv78xx0_ge10_shared = { - .name = MV643XX_ETH_SHARED_NAME, - .id = 2, - .dev = { - .platform_data = &mv78xx0_ge10_shared_data, - }, - .num_resources = 1, - .resource = mv78xx0_ge10_shared_resources, -}; - -static struct resource mv78xx0_ge10_resources[] = { - { - .name = "ge10 irq", - .start = IRQ_MV78XX0_GE10_SUM, - .end = IRQ_MV78XX0_GE10_SUM, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device mv78xx0_ge10 = { - .name = MV643XX_ETH_NAME, - .id = 2, - .num_resources = 1, - .resource = mv78xx0_ge10_resources, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, -}; - void __init mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data) { u32 dev, rev; - eth_data->shared = &mv78xx0_ge10_shared; - mv78xx0_ge10.dev.platform_data = eth_data; - /* * On the Z0, ge10 and ge11 are internally connected back * to back, and not brought out. @@ -458,65 +234,19 @@ void __init mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data) eth_data->duplex = DUPLEX_FULL; } - platform_device_register(&mv78xx0_ge10_shared); - platform_device_register(&mv78xx0_ge10); + orion_ge10_init(eth_data, &mv78xx0_mbus_dram_info, + GE10_PHYS_BASE, IRQ_MV78XX0_GE10_SUM, + NO_IRQ, get_tclk()); } /***************************************************************************** * GE11 ****************************************************************************/ -struct mv643xx_eth_shared_platform_data mv78xx0_ge11_shared_data = { - .t_clk = 0, - .dram = &mv78xx0_mbus_dram_info, - .shared_smi = &mv78xx0_ge00_shared, -}; - -static struct resource mv78xx0_ge11_shared_resources[] = { - { - .name = "ge11 base", - .start = GE11_PHYS_BASE + 0x2000, - .end = GE11_PHYS_BASE + 0x3fff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device mv78xx0_ge11_shared = { - .name = MV643XX_ETH_SHARED_NAME, - .id = 3, - .dev = { - .platform_data = &mv78xx0_ge11_shared_data, - }, - .num_resources = 1, - .resource = mv78xx0_ge11_shared_resources, -}; - -static struct resource mv78xx0_ge11_resources[] = { - { - .name = "ge11 irq", - .start = IRQ_MV78XX0_GE11_SUM, - .end = IRQ_MV78XX0_GE11_SUM, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device mv78xx0_ge11 = { - .name = MV643XX_ETH_NAME, - .id = 3, - .num_resources = 1, - .resource = mv78xx0_ge11_resources, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, -}; - void __init mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data) { u32 dev, rev; - eth_data->shared = &mv78xx0_ge11_shared; - mv78xx0_ge11.dev.platform_data = eth_data; - /* * On the Z0, ge10 and ge11 are internally connected back * to back, and not brought out. @@ -528,293 +258,68 @@ void __init mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data) eth_data->duplex = DUPLEX_FULL; } - platform_device_register(&mv78xx0_ge11_shared); - platform_device_register(&mv78xx0_ge11); + orion_ge11_init(eth_data, &mv78xx0_mbus_dram_info, + GE11_PHYS_BASE, IRQ_MV78XX0_GE11_SUM, + NO_IRQ, get_tclk()); } /***************************************************************************** - * I2C bus 0 - ****************************************************************************/ - -static struct mv64xxx_i2c_pdata mv78xx0_i2c_0_pdata = { - .freq_m = 8, /* assumes 166 MHz TCLK */ - .freq_n = 3, - .timeout = 1000, /* Default timeout of 1 second */ -}; - -static struct resource mv78xx0_i2c_0_resources[] = { - { - .start = I2C_0_PHYS_BASE, - .end = I2C_0_PHYS_BASE + 0x1f, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_MV78XX0_I2C_0, - .end = IRQ_MV78XX0_I2C_0, - .flags = IORESOURCE_IRQ, - }, -}; - - -static struct platform_device mv78xx0_i2c_0 = { - .name = MV64XXX_I2C_CTLR_NAME, - .id = 0, - .num_resources = ARRAY_SIZE(mv78xx0_i2c_0_resources), - .resource = mv78xx0_i2c_0_resources, - .dev = { - .platform_data = &mv78xx0_i2c_0_pdata, - }, -}; - -/***************************************************************************** - * I2C bus 1 + * I2C ****************************************************************************/ - -static struct mv64xxx_i2c_pdata mv78xx0_i2c_1_pdata = { - .freq_m = 8, /* assumes 166 MHz TCLK */ - .freq_n = 3, - .timeout = 1000, /* Default timeout of 1 second */ -}; - -static struct resource mv78xx0_i2c_1_resources[] = { - { - .start = I2C_1_PHYS_BASE, - .end = I2C_1_PHYS_BASE + 0x1f, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_MV78XX0_I2C_1, - .end = IRQ_MV78XX0_I2C_1, - .flags = IORESOURCE_IRQ, - }, -}; - - -static struct platform_device mv78xx0_i2c_1 = { - .name = MV64XXX_I2C_CTLR_NAME, - .id = 1, - .num_resources = ARRAY_SIZE(mv78xx0_i2c_1_resources), - .resource = mv78xx0_i2c_1_resources, - .dev = { - .platform_data = &mv78xx0_i2c_1_pdata, - }, -}; - void __init mv78xx0_i2c_init(void) { - platform_device_register(&mv78xx0_i2c_0); - platform_device_register(&mv78xx0_i2c_1); + orion_i2c_init(I2C_0_PHYS_BASE, IRQ_MV78XX0_I2C_0, 8); + orion_i2c_1_init(I2C_1_PHYS_BASE, IRQ_MV78XX0_I2C_1, 8); } /***************************************************************************** * SATA ****************************************************************************/ -static struct resource mv78xx0_sata_resources[] = { - { - .name = "sata base", - .start = SATA_PHYS_BASE, - .end = SATA_PHYS_BASE + 0x5000 - 1, - .flags = IORESOURCE_MEM, - }, { - .name = "sata irq", - .start = IRQ_MV78XX0_SATA, - .end = IRQ_MV78XX0_SATA, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device mv78xx0_sata = { - .name = "sata_mv", - .id = 0, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(mv78xx0_sata_resources), - .resource = mv78xx0_sata_resources, -}; - void __init mv78xx0_sata_init(struct mv_sata_platform_data *sata_data) { - sata_data->dram = &mv78xx0_mbus_dram_info; - mv78xx0_sata.dev.platform_data = sata_data; - platform_device_register(&mv78xx0_sata); + orion_sata_init(sata_data, &mv78xx0_mbus_dram_info, + SATA_PHYS_BASE, IRQ_MV78XX0_SATA); } /***************************************************************************** * UART0 ****************************************************************************/ -static struct plat_serial8250_port mv78xx0_uart0_data[] = { - { - .mapbase = UART0_PHYS_BASE, - .membase = (char *)UART0_VIRT_BASE, - .irq = IRQ_MV78XX0_UART_0, - .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = 0, - }, { - }, -}; - -static struct resource mv78xx0_uart0_resources[] = { - { - .start = UART0_PHYS_BASE, - .end = UART0_PHYS_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_MV78XX0_UART_0, - .end = IRQ_MV78XX0_UART_0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device mv78xx0_uart0 = { - .name = "serial8250", - .id = 0, - .dev = { - .platform_data = mv78xx0_uart0_data, - }, - .resource = mv78xx0_uart0_resources, - .num_resources = ARRAY_SIZE(mv78xx0_uart0_resources), -}; - void __init mv78xx0_uart0_init(void) { - platform_device_register(&mv78xx0_uart0); + orion_uart0_init(UART0_VIRT_BASE, UART0_PHYS_BASE, + IRQ_MV78XX0_UART_0, get_tclk()); } /***************************************************************************** * UART1 ****************************************************************************/ -static struct plat_serial8250_port mv78xx0_uart1_data[] = { - { - .mapbase = UART1_PHYS_BASE, - .membase = (char *)UART1_VIRT_BASE, - .irq = IRQ_MV78XX0_UART_1, - .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = 0, - }, { - }, -}; - -static struct resource mv78xx0_uart1_resources[] = { - { - .start = UART1_PHYS_BASE, - .end = UART1_PHYS_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_MV78XX0_UART_1, - .end = IRQ_MV78XX0_UART_1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device mv78xx0_uart1 = { - .name = "serial8250", - .id = 1, - .dev = { - .platform_data = mv78xx0_uart1_data, - }, - .resource = mv78xx0_uart1_resources, - .num_resources = ARRAY_SIZE(mv78xx0_uart1_resources), -}; - void __init mv78xx0_uart1_init(void) { - platform_device_register(&mv78xx0_uart1); + orion_uart1_init(UART1_VIRT_BASE, UART1_PHYS_BASE, + IRQ_MV78XX0_UART_1, get_tclk()); } /***************************************************************************** * UART2 ****************************************************************************/ -static struct plat_serial8250_port mv78xx0_uart2_data[] = { - { - .mapbase = UART2_PHYS_BASE, - .membase = (char *)UART2_VIRT_BASE, - .irq = IRQ_MV78XX0_UART_2, - .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = 0, - }, { - }, -}; - -static struct resource mv78xx0_uart2_resources[] = { - { - .start = UART2_PHYS_BASE, - .end = UART2_PHYS_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_MV78XX0_UART_2, - .end = IRQ_MV78XX0_UART_2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device mv78xx0_uart2 = { - .name = "serial8250", - .id = 2, - .dev = { - .platform_data = mv78xx0_uart2_data, - }, - .resource = mv78xx0_uart2_resources, - .num_resources = ARRAY_SIZE(mv78xx0_uart2_resources), -}; - void __init mv78xx0_uart2_init(void) { - platform_device_register(&mv78xx0_uart2); + orion_uart2_init(UART2_VIRT_BASE, UART2_PHYS_BASE, + IRQ_MV78XX0_UART_2, get_tclk()); } - /***************************************************************************** * UART3 ****************************************************************************/ -static struct plat_serial8250_port mv78xx0_uart3_data[] = { - { - .mapbase = UART3_PHYS_BASE, - .membase = (char *)UART3_VIRT_BASE, - .irq = IRQ_MV78XX0_UART_3, - .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = 0, - }, { - }, -}; - -static struct resource mv78xx0_uart3_resources[] = { - { - .start = UART3_PHYS_BASE, - .end = UART3_PHYS_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_MV78XX0_UART_3, - .end = IRQ_MV78XX0_UART_3, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device mv78xx0_uart3 = { - .name = "serial8250", - .id = 3, - .dev = { - .platform_data = mv78xx0_uart3_data, - }, - .resource = mv78xx0_uart3_resources, - .num_resources = ARRAY_SIZE(mv78xx0_uart3_resources), -}; - void __init mv78xx0_uart3_init(void) { - platform_device_register(&mv78xx0_uart3); + orion_uart3_init(UART3_VIRT_BASE, UART3_PHYS_BASE, + IRQ_MV78XX0_UART_3, get_tclk()); } - /***************************************************************************** * Time handling ****************************************************************************/ @@ -895,13 +400,4 @@ void __init mv78xx0_init(void) #ifdef CONFIG_CACHE_FEROCEON_L2 feroceon_l2_init(is_l2_writethrough()); #endif - - mv78xx0_ge00_shared_data.t_clk = tclk; - mv78xx0_ge01_shared_data.t_clk = tclk; - mv78xx0_ge10_shared_data.t_clk = tclk; - mv78xx0_ge11_shared_data.t_clk = tclk; - mv78xx0_uart0_data[0].uartclk = tclk; - mv78xx0_uart1_data[0].uartclk = tclk; - mv78xx0_uart2_data[0].uartclk = tclk; - mv78xx0_uart3_data[0].uartclk = tclk; } diff --git a/arch/arm/mach-mv78xx0/mpp.c b/arch/arm/mach-mv78xx0/mpp.c index 65b72c4..59b7686 100644 --- a/arch/arm/mach-mv78xx0/mpp.c +++ b/arch/arm/mach-mv78xx0/mpp.c @@ -12,6 +12,7 @@ #include <linux/init.h> #include <linux/mbus.h> #include <linux/io.h> +#include <plat/mpp.h> #include <asm/gpio.h> #include <mach/hardware.h> #include "common.h" @@ -31,61 +32,8 @@ static unsigned int __init mv78xx0_variant(void) return 0; } -#define MPP_CTRL(i) (DEV_BUS_VIRT_BASE + (i) * 4) -#define MPP_NR_REGS (1 + MPP_MAX/8) - void __init mv78xx0_mpp_conf(unsigned int *mpp_list) { - u32 mpp_ctrl[MPP_NR_REGS]; - unsigned int variant_mask; - int i; - - variant_mask = mv78xx0_variant(); - if (!variant_mask) - return; - - printk(KERN_DEBUG "initial MPP regs:"); - for (i = 0; i < MPP_NR_REGS; i++) { - mpp_ctrl[i] = readl(MPP_CTRL(i)); - printk(" %08x", mpp_ctrl[i]); - } - printk("\n"); - - for ( ; *mpp_list; mpp_list++) { - unsigned int num = MPP_NUM(*mpp_list); - unsigned int sel = MPP_SEL(*mpp_list); - int shift, gpio_mode; - - if (num > MPP_MAX) { - printk(KERN_ERR "mv78xx0_mpp_conf: invalid MPP " - "number (%u)\n", num); - continue; - } - if (!(*mpp_list & variant_mask)) { - printk(KERN_WARNING - "mv78xx0_mpp_conf: requested MPP%u config " - "unavailable on this hardware\n", num); - continue; - } - - shift = (num & 7) << 2; - mpp_ctrl[num / 8] &= ~(0xf << shift); - mpp_ctrl[num / 8] |= sel << shift; - - gpio_mode = 0; - if (*mpp_list & MPP_INPUT_MASK) - gpio_mode |= GPIO_INPUT_OK; - if (*mpp_list & MPP_OUTPUT_MASK) - gpio_mode |= GPIO_OUTPUT_OK; - if (sel != 0) - gpio_mode = 0; - orion_gpio_set_valid(num, gpio_mode); - } - - printk(KERN_DEBUG " final MPP regs:"); - for (i = 0; i < MPP_NR_REGS; i++) { - writel(mpp_ctrl[i], MPP_CTRL(i)); - printk(" %08x", mpp_ctrl[i]); - } - printk("\n"); + orion_mpp_conf(mpp_list, mv78xx0_variant(), + MPP_MAX, DEV_BUS_VIRT_BASE); } diff --git a/arch/arm/mach-mv78xx0/mpp.h b/arch/arm/mach-mv78xx0/mpp.h index 80840b7..b61b509 100644 --- a/arch/arm/mach-mv78xx0/mpp.h +++ b/arch/arm/mach-mv78xx0/mpp.h @@ -19,14 +19,8 @@ /* may be output signal */ ((!!(_out)) << 13) | \ /* available on A0 */ ((!!(_78100_A0)) << 14)) -#define MPP_NUM(x) ((x) & 0xff) -#define MPP_SEL(x) (((x) >> 8) & 0xf) - /* num sel i o 78100_A0 */ -#define MPP_INPUT_MASK MPP(0, 0x0, 1, 0, 0) -#define MPP_OUTPUT_MASK MPP(0, 0x0, 0, 1, 0) - #define MPP_78100_A0_MASK MPP(0, 0x0, 0, 0, 1) #define MPP0_GPIO MPP(0, 0x0, 1, 1, 1) diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig deleted file mode 100644 index 340809a..0000000 --- a/arch/arm/mach-mx3/Kconfig +++ /dev/null @@ -1,257 +0,0 @@ -if ARCH_MX3 - -# ARCH_MX31 and ARCH_MX35 are left for compatibility -# Some usages assume that having one of them implies not having (e.g.) ARCH_MX2. -# To easily distinguish good and reviewed from unreviewed usages new (and IMHO -# more sensible) names are used: SOC_IMX31 and SOC_IMX35 -config ARCH_MX31 - bool - -config ARCH_MX35 - bool - -config SOC_IMX31 - bool - select IMX_HAVE_PLATFORM_MXC_RNGA - select ARCH_MXC_AUDMUX_V2 - select ARCH_MX31 - select MXC_AVIC - -config SOC_IMX35 - bool - select ARCH_MXC_IOMUX_V3 - select ARCH_MXC_AUDMUX_V2 - select HAVE_EPIT - select ARCH_MX35 - select MXC_AVIC - -comment "MX3 platforms:" - -config MACH_MX31ADS - bool "Support MX31ADS platforms" - select SOC_IMX31 - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_SSI - select IMX_HAVE_PLATFORM_IMX_UART - default y - help - Include support for MX31ADS platform. This includes specific - configurations for the board and its peripherals. - -config MACH_MX31ADS_WM1133_EV1 - bool "Support Wolfson Microelectronics 1133-EV1 module" - depends on MACH_MX31ADS - depends on MFD_WM8350_I2C - depends on REGULATOR_WM8350 - select MFD_WM8350_CONFIG_MODE_0 - select MFD_WM8352_CONFIG_MODE_0 - help - Include support for the Wolfson Microelectronics 1133-EV1 PMU - and audio module for the MX31ADS platform. - -config MACH_PCM037 - bool "Support Phytec pcm037 (i.MX31) platforms" - select SOC_IMX31 - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_MMC - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_MXC_W1 - select MXC_ULPI if USB_ULPI - help - Include support for Phytec pcm037 platform. This includes - specific configurations for the board and its peripherals. - -config MACH_PCM037_EET - bool "Support pcm037 EET board extensions" - depends on MACH_PCM037 - select IMX_HAVE_PLATFORM_SPI_IMX - help - Add support for PCM037 EET baseboard extensions. If you are using the - OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel - command-line parameter. - -config MACH_MX31LITE - bool "Support MX31 LITEKIT (LogicPD)" - select SOC_IMX31 - select MXC_ULPI if USB_ULPI - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_MMC - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_SPI_IMX - help - Include support for MX31 LITEKIT platform. This includes specific - configurations for the board and its peripherals. - -config MACH_MX31_3DS - bool "Support MX31PDK (3DS)" - select SOC_IMX31 - select MXC_DEBUG_BOARD - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_KEYPAD - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_SPI_IMX - select MXC_ULPI if USB_ULPI - help - Include support for MX31PDK (3DS) platform. This includes specific - configurations for the board and its peripherals. - -config MACH_MX31_3DS_MXC_NAND_USE_BBT - bool "Make the MXC NAND driver use the in flash Bad Block Table" - depends on MACH_MX31_3DS - depends on MTD_NAND_MXC - help - Enable this if you want that the MXC NAND driver uses the in flash - Bad Block Table to know what blocks are bad instead of scanning the - entire flash looking for bad block markers. - -config MACH_MX31MOBOARD - bool "Support mx31moboard platforms (EPFL Mobots group)" - select SOC_IMX31 - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_MMC - select IMX_HAVE_PLATFORM_SPI_IMX - select MXC_ULPI if USB_ULPI - help - Include support for mx31moboard platform. This includes specific - configurations for the board and its peripherals. - -config MACH_MX31LILLY - bool "Support MX31 LILLY-1131 platforms (INCO startec)" - select SOC_IMX31 - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_MMC - select IMX_HAVE_PLATFORM_SPI_IMX - select MXC_ULPI if USB_ULPI - help - Include support for mx31 based LILLY1131 modules. This includes - specific configurations for the board and its peripherals. - -config MACH_QONG - bool "Support Dave/DENX QongEVB-LITE platform" - select SOC_IMX31 - select IMX_HAVE_PLATFORM_IMX_UART - help - Include support for Dave/DENX QongEVB-LITE platform. This includes - specific configurations for the board and its peripherals. - -config MACH_PCM043 - bool "Support Phytec pcm043 (i.MX35) platforms" - select SOC_IMX35 - select IMX_HAVE_PLATFORM_FLEXCAN - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_SSI - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select MXC_ULPI if USB_ULPI - help - Include support for Phytec pcm043 platform. This includes - specific configurations for the board and its peripherals. - -config MACH_ARMADILLO5X0 - bool "Support Atmark Armadillo-500 Development Base Board" - select SOC_IMX31 - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_MMC - select IMX_HAVE_PLATFORM_MXC_NAND - select MXC_ULPI if USB_ULPI - help - Include support for Atmark Armadillo-500 platform. This includes - specific configurations for the board and its peripherals. - -config MACH_MX35_3DS - bool "Support MX35PDK platform" - select SOC_IMX35 - select MXC_DEBUG_BOARD - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - help - Include support for MX35PDK platform. This includes specific - configurations for the board and its peripherals. - -config MACH_KZM_ARM11_01 - bool "Support KZM-ARM11-01(Kyoto Microcomputer)" - select SOC_IMX31 - select IMX_HAVE_PLATFORM_IMX_UART - help - Include support for KZM-ARM11-01. This includes specific - configurations for the board and its peripherals. - -config MACH_BUG - bool "Support Buglabs BUGBase platform" - select SOC_IMX31 - select IMX_HAVE_PLATFORM_IMX_UART - default y - help - Include support for BUGBase 1.3 platform. This includes specific - configurations for the board and its peripherals. - -config MACH_EUKREA_CPUIMX35 - bool "Support Eukrea CPUIMX35 Platform" - select SOC_IMX35 - select IMX_HAVE_PLATFORM_FLEXCAN - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select MXC_ULPI if USB_ULPI - help - Include support for Eukrea CPUIMX35 platform. This includes - specific configurations for the board and its peripherals. - -choice - prompt "Baseboard" - depends on MACH_EUKREA_CPUIMX35 - default MACH_EUKREA_MBIMXSD35_BASEBOARD - -config MACH_EUKREA_MBIMXSD35_BASEBOARD - bool "Eukrea MBIMXSD development board" - select IMX_HAVE_PLATFORM_IMX_SSI - help - This adds board specific devices that can be found on Eukrea's - MBIMXSD evaluation board. - -endchoice - -config MACH_VPR200 - bool "Support VPR200 platform" - select SOC_IMX35 - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - help - Include support for VPR200 platform. This includes specific - configurations for the board and its peripherals. - -endif diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile deleted file mode 100644 index a54faf2..0000000 --- a/arch/arm/mach-mx3/Makefile +++ /dev/null @@ -1,26 +0,0 @@ -# -# Makefile for the linux kernel. -# - -# Object file lists. - -obj-y := mm.o devices.o cpu.o -obj-$(CONFIG_SOC_IMX31) += clock-imx31.o iomux-imx31.o ehci-imx31.o -obj-$(CONFIG_SOC_IMX35) += clock-imx35.o ehci-imx35.o -obj-$(CONFIG_MACH_MX31ADS) += mach-mx31ads.o -obj-$(CONFIG_MACH_MX31LILLY) += mach-mx31lilly.o mx31lilly-db.o -obj-$(CONFIG_MACH_MX31LITE) += mach-mx31lite.o mx31lite-db.o -obj-$(CONFIG_MACH_PCM037) += mach-pcm037.o -obj-$(CONFIG_MACH_PCM037_EET) += mach-pcm037_eet.o -obj-$(CONFIG_MACH_MX31_3DS) += mach-mx31_3ds.o -obj-$(CONFIG_MACH_MX31MOBOARD) += mach-mx31moboard.o mx31moboard-devboard.o \ - mx31moboard-marxbot.o mx31moboard-smartbot.o -obj-$(CONFIG_MACH_QONG) += mach-qong.o -obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o -obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o -obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o -obj-$(CONFIG_MACH_KZM_ARM11_01) += mach-kzm_arm11_01.o -obj-$(CONFIG_MACH_BUG) += mach-bug.o -obj-$(CONFIG_MACH_EUKREA_CPUIMX35) += mach-cpuimx35.o -obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd-baseboard.o -obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o diff --git a/arch/arm/mach-mx3/Makefile.boot b/arch/arm/mach-mx3/Makefile.boot deleted file mode 100644 index e1dd366..0000000 --- a/arch/arm/mach-mx3/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ - zreladdr-y := 0x80008000 -params_phys-y := 0x80000100 -initrd_phys-y := 0x80800000 diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c deleted file mode 100644 index b6672db..0000000 --- a/arch/arm/mach-mx3/devices.c +++ /dev/null @@ -1,115 +0,0 @@ -/* - * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Sascha Hauer, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -#include <linux/dma-mapping.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/serial.h> -#include <linux/gpio.h> -#include <mach/hardware.h> -#include <mach/irqs.h> -#include <mach/common.h> -#include <mach/mx3_camera.h> - -#include "devices.h" - -/* i.MX31 Image Processing Unit */ - -/* The resource order is important! */ -static struct resource mx3_ipu_rsrc[] = { - { - .start = MX3x_IPU_CTRL_BASE_ADDR, - .end = MX3x_IPU_CTRL_BASE_ADDR + 0x5F, - .flags = IORESOURCE_MEM, - }, { - .start = MX3x_IPU_CTRL_BASE_ADDR + 0x88, - .end = MX3x_IPU_CTRL_BASE_ADDR + 0xB3, - .flags = IORESOURCE_MEM, - }, { - .start = MX3x_INT_IPU_SYN, - .end = MX3x_INT_IPU_SYN, - .flags = IORESOURCE_IRQ, - }, { - .start = MX3x_INT_IPU_ERR, - .end = MX3x_INT_IPU_ERR, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mx3_ipu = { - .name = "ipu-core", - .id = -1, - .num_resources = ARRAY_SIZE(mx3_ipu_rsrc), - .resource = mx3_ipu_rsrc, -}; - -static struct resource fb_resources[] = { - { - .start = MX3x_IPU_CTRL_BASE_ADDR + 0xB4, - .end = MX3x_IPU_CTRL_BASE_ADDR + 0x1BF, - .flags = IORESOURCE_MEM, - }, -}; - -struct platform_device mx3_fb = { - .name = "mx3_sdc_fb", - .id = -1, - .num_resources = ARRAY_SIZE(fb_resources), - .resource = fb_resources, - .dev = { - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -static struct resource camera_resources[] = { - { - .start = MX3x_IPU_CTRL_BASE_ADDR + 0x60, - .end = MX3x_IPU_CTRL_BASE_ADDR + 0x87, - .flags = IORESOURCE_MEM, - }, -}; - -struct platform_device mx3_camera = { - .name = "mx3-camera", - .id = 0, - .num_resources = ARRAY_SIZE(camera_resources), - .resource = camera_resources, - .dev = { - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -static struct resource imx_rtc_resources[] = { - { - .start = MX31_RTC_BASE_ADDR, - .end = MX31_RTC_BASE_ADDR + 0x3fff, - .flags = IORESOURCE_MEM, - }, - { - .start = MX31_INT_RTC, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device imx_rtc_device0 = { - .name = "mxc_rtc", - .id = -1, - .num_resources = ARRAY_SIZE(imx_rtc_resources), - .resource = imx_rtc_resources, -}; diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h deleted file mode 100644 index 121962c..0000000 --- a/arch/arm/mach-mx3/devices.h +++ /dev/null @@ -1,4 +0,0 @@ -extern struct platform_device mx3_ipu; -extern struct platform_device mx3_fb; -extern struct platform_device mx3_camera; -extern struct platform_device imx_rtc_device0; diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c deleted file mode 100644 index 54d7174..0000000 --- a/arch/arm/mach-mx3/mm.c +++ /dev/null @@ -1,141 +0,0 @@ -/* - * Copyright (C) 1999,2000 Arm Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * - add MX31 specific definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/mm.h> -#include <linux/init.h> -#include <linux/err.h> - -#include <asm/pgtable.h> -#include <asm/mach/map.h> -#include <asm/hardware/cache-l2x0.h> - -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-v3.h> -#include <mach/gpio.h> -#include <mach/irqs.h> - -#ifdef CONFIG_SOC_IMX31 -static struct map_desc mx31_io_desc[] __initdata = { - imx_map_entry(MX31, X_MEMC, MT_DEVICE), - imx_map_entry(MX31, AVIC, MT_DEVICE_NONSHARED), - imx_map_entry(MX31, AIPS1, MT_DEVICE_NONSHARED), - imx_map_entry(MX31, AIPS2, MT_DEVICE_NONSHARED), - imx_map_entry(MX31, SPBA0, MT_DEVICE_NONSHARED), -}; - -/* - * This function initializes the memory map. It is called during the - * system startup to create static physical to virtual memory mappings - * for the IO modules. - */ -void __init mx31_map_io(void) -{ - iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc)); -} - -void __init imx31_init_early(void) -{ - mxc_set_cpu_type(MXC_CPU_MX31); - mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR)); -} - -static struct mxc_gpio_port imx31_gpio_ports[] = { - DEFINE_IMX_GPIO_PORT_IRQ(MX31, 0, 1, MX31_INT_GPIO1), - DEFINE_IMX_GPIO_PORT_IRQ(MX31, 1, 2, MX31_INT_GPIO2), - DEFINE_IMX_GPIO_PORT_IRQ(MX31, 2, 3, MX31_INT_GPIO3), -}; - -void __init mx31_init_irq(void) -{ - mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR)); - mxc_gpio_init(imx31_gpio_ports, ARRAY_SIZE(imx31_gpio_ports)); -} -#endif /* ifdef CONFIG_SOC_IMX31 */ - -#ifdef CONFIG_SOC_IMX35 -static struct map_desc mx35_io_desc[] __initdata = { - imx_map_entry(MX35, X_MEMC, MT_DEVICE), - imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED), - imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED), - imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED), - imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED), -}; - -void __init mx35_map_io(void) -{ - iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc)); -} - -void __init imx35_init_early(void) -{ - mxc_set_cpu_type(MXC_CPU_MX35); - mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR)); - mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR)); -} - -static struct mxc_gpio_port imx35_gpio_ports[] = { - DEFINE_IMX_GPIO_PORT_IRQ(MX35, 0, 1, MX35_INT_GPIO1), - DEFINE_IMX_GPIO_PORT_IRQ(MX35, 1, 2, MX35_INT_GPIO2), - DEFINE_IMX_GPIO_PORT_IRQ(MX35, 2, 3, MX35_INT_GPIO3), -}; - -void __init mx35_init_irq(void) -{ - mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR)); - mxc_gpio_init(imx35_gpio_ports, ARRAY_SIZE(imx35_gpio_ports)); -} -#endif /* ifdef CONFIG_SOC_IMX35 */ - -#ifdef CONFIG_CACHE_L2X0 -static int mxc_init_l2x0(void) -{ - void __iomem *l2x0_base; - void __iomem *clkctl_base; -/* - * First of all, we must repair broken chip settings. There are some - * i.MX35 CPUs in the wild, comming with bogus L2 cache settings. These - * misconfigured CPUs will run amok immediately when the L2 cache gets enabled. - * Workaraound is to setup the correct register setting prior enabling the - * L2 cache. This should not hurt already working CPUs, as they are using the - * same value - */ -#define L2_MEM_VAL 0x10 - - clkctl_base = ioremap(MX35_CLKCTL_BASE_ADDR, 4096); - if (clkctl_base != NULL) { - writel(0x00000515, clkctl_base + L2_MEM_VAL); - iounmap(clkctl_base); - } else { - pr_err("L2 cache: Cannot fix timing. Trying to continue without\n"); - } - - l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096); - if (IS_ERR(l2x0_base)) { - printk(KERN_ERR "remapping L2 cache area failed with %ld\n", - PTR_ERR(l2x0_base)); - return 0; - } - - l2x0_init(l2x0_base, 0x00030024, 0x00000000); - - return 0; -} - -arch_initcall(mxc_init_l2x0); -#endif diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig index 159340d..799fbc4 100644 --- a/arch/arm/mach-mx5/Kconfig +++ b/arch/arm/mach-mx5/Kconfig @@ -1,11 +1,11 @@ -if ARCH_MX5 -# ARCH_MX50/51/53 are left to mark places where prevent multi-soc in single +if ARCH_MX503 || ARCH_MX51 +# ARCH_MX5/50/53 are left to mark places where prevent multi-soc in single # image. So for most time, SOC_IMX50/51/53 should be used. -config ARCH_MX50 +config ARCH_MX5 bool -config ARCH_MX51 +config ARCH_MX50 bool config ARCH_MX53 @@ -13,27 +13,54 @@ config ARCH_MX53 config SOC_IMX50 bool + select CPU_V7 + select ARM_L1_CACHE_SHIFT_6 select MXC_TZIC select ARCH_MXC_IOMUX_V3 select ARCH_MXC_AUDMUX_V2 select ARCH_HAS_CPUFREQ + select ARCH_MX5 select ARCH_MX50 config SOC_IMX51 bool + select CPU_V7 + select ARM_L1_CACHE_SHIFT_6 select MXC_TZIC select ARCH_MXC_IOMUX_V3 select ARCH_MXC_AUDMUX_V2 select ARCH_HAS_CPUFREQ - select ARCH_MX51 + select ARCH_MX5 config SOC_IMX53 bool + select CPU_V7 + select ARM_L1_CACHE_SHIFT_6 select MXC_TZIC select ARCH_MXC_IOMUX_V3 + select ARCH_MX5 select ARCH_MX53 -comment "MX5 platforms:" +if ARCH_MX50_SUPPORTED +#comment "i.MX50 machines:" + +config MACH_MX50_RDP + bool "Support MX50 reference design platform" + depends on BROKEN + select SOC_IMX50 + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select IMX_HAVE_PLATFORM_SPI_IMX + select IMX_HAVE_PLATFORM_FEC + help + Include support for MX50 reference design platform (RDP) board. This + includes specific configurations for the board and its peripherals. + +endif # ARCH_MX50_SUPPORTED + +if ARCH_MX51 +comment "i.MX51 machines:" config MACH_MX51_BABBAGE bool "Support MX51 BABBAGE platforms" @@ -136,6 +163,11 @@ config MACH_MX51_EFIKASB Include support for Genesi Efika Smartbook. This includes specific configurations for the board and its peripherals. +endif # ARCH_MX51 + +if ARCH_MX53_SUPPORTED +comment "i.MX53 machines:" + config MACH_MX53_EVK bool "Support MX53 EVK platforms" select SOC_IMX53 @@ -154,6 +186,7 @@ config MACH_MX53_SMD select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX help Include support for MX53 SMD platform. This includes specific configurations for the board and its peripherals. @@ -170,17 +203,6 @@ config MACH_MX53_LOCO Include support for MX53 LOCO platform. This includes specific configurations for the board and its peripherals. -config MACH_MX50_RDP - bool "Support MX50 reference design platform" - depends on BROKEN - select SOC_IMX50 - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_SPI_IMX - select IMX_HAVE_PLATFORM_FEC - help - Include support for MX50 reference design platform (RDP) board. This - includes specific configurations for the board and its peripherals. +endif # ARCH_MX53_SUPPORTED endif diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c index d0296a9..4efa02e 100644 --- a/arch/arm/mach-mx5/board-cpuimx51.c +++ b/arch/arm/mach-mx5/board-cpuimx51.c @@ -23,13 +23,11 @@ #include <linux/io.h> #include <linux/interrupt.h> #include <linux/irq.h> -#include <linux/fsl_devices.h> #include <mach/eukrea-baseboards.h> #include <mach/common.h> #include <mach/hardware.h> #include <mach/iomux-mx51.h> -#include <mach/mxc_ehci.h> #include <asm/irq.h> #include <asm/setup.h> diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c index 29b1808..5ef25a5 100644 --- a/arch/arm/mach-mx5/board-cpuimx51sd.c +++ b/arch/arm/mach-mx5/board-cpuimx51sd.c @@ -23,7 +23,6 @@ #include <linux/io.h> #include <linux/interrupt.h> #include <linux/irq.h> -#include <linux/fsl_devices.h> #include <linux/i2c-gpio.h> #include <linux/spi/spi.h> #include <linux/can/platform/mcp251x.h> @@ -32,7 +31,6 @@ #include <mach/common.h> #include <mach/hardware.h> #include <mach/iomux-mx51.h> -#include <mach/mxc_ehci.h> #include <asm/irq.h> #include <asm/setup.h> diff --git a/arch/arm/mach-mx5/board-mx50_rdp.c b/arch/arm/mach-mx5/board-mx50_rdp.c index dedf7f2..11210e1 100644 --- a/arch/arm/mach-mx5/board-mx50_rdp.c +++ b/arch/arm/mach-mx5/board-mx50_rdp.c @@ -23,7 +23,6 @@ #include <linux/gpio.h> #include <linux/delay.h> #include <linux/io.h> -#include <linux/fsl_devices.h> #include <mach/common.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c index bea4e41..c7b3fab 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -16,9 +16,6 @@ #include <linux/gpio.h> #include <linux/delay.h> #include <linux/io.h> -#include <linux/fsl_devices.h> -#include <linux/fec.h> -#include <linux/gpio_keys.h> #include <linux/input.h> #include <linux/spi/flash.h> #include <linux/spi/spi.h> @@ -26,7 +23,6 @@ #include <mach/common.h> #include <mach/hardware.h> #include <mach/iomux-mx51.h> -#include <mach/mxc_ehci.h> #include <asm/irq.h> #include <asm/setup.h> @@ -208,18 +204,16 @@ static inline void babbage_usbhub_reset(void) { int ret; - /* Bring USB hub out of reset */ - ret = gpio_request(BABBAGE_USB_HUB_RESET, "GPIO1_7"); + /* Reset USB hub */ + ret = gpio_request_one(BABBAGE_USB_HUB_RESET, + GPIOF_OUT_INIT_LOW, "GPIO1_7"); if (ret) { printk(KERN_ERR"failed to get GPIO_USB_HUB_RESET: %d\n", ret); return; } - gpio_direction_output(BABBAGE_USB_HUB_RESET, 0); - /* USB HUB RESET - De-assert USB HUB RESET_N */ - msleep(1); - gpio_set_value(BABBAGE_USB_HUB_RESET, 0); - msleep(1); + msleep(2); + /* Deassert reset */ gpio_set_value(BABBAGE_USB_HUB_RESET, 1); } @@ -361,7 +355,7 @@ static void __init mx51_babbage_init(void) /* Set the PAD settings for the pwr key. */ mxc_iomux_v3_setup_pad(power_key); - imx51_add_gpio_keys(&imx_button_data); + imx_add_gpio_keys(&imx_button_data); imx51_add_imx_i2c(0, &babbage_i2c_data); imx51_add_imx_i2c(1, &babbage_i2c_data); diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c index acab191..6e36231 100644 --- a/arch/arm/mach-mx5/board-mx51_efikamx.c +++ b/arch/arm/mach-mx5/board-mx51_efikamx.c @@ -22,7 +22,6 @@ #include <linux/input.h> #include <linux/delay.h> #include <linux/io.h> -#include <linux/fsl_devices.h> #include <linux/spi/flash.h> #include <linux/spi/spi.h> #include <linux/mfd/mc13892.h> @@ -32,8 +31,6 @@ #include <mach/common.h> #include <mach/hardware.h> #include <mach/iomux-mx51.h> -#include <mach/i2c.h> -#include <mach/mxc_ehci.h> #include <asm/irq.h> #include <asm/setup.h> @@ -252,7 +249,7 @@ static void __init mx51_efikamx_init(void) } platform_device_register(&mx51_efikamx_leds_device); - imx51_add_gpio_keys(&mx51_efikamx_powerkey_data); + imx_add_gpio_keys(&mx51_efikamx_powerkey_data); if (system_rev == 0x11) { gpio_request(EFIKAMX_RESET1_1, "reset"); diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-mx5/board-mx51_efikasb.c index db04ce84..474fc6e 100644 --- a/arch/arm/mach-mx5/board-mx51_efikasb.c +++ b/arch/arm/mach-mx5/board-mx51_efikasb.c @@ -22,7 +22,6 @@ #include <linux/input.h> #include <linux/delay.h> #include <linux/io.h> -#include <linux/fsl_devices.h> #include <linux/spi/flash.h> #include <linux/spi/spi.h> #include <linux/mfd/mc13892.h> @@ -35,8 +34,6 @@ #include <mach/common.h> #include <mach/hardware.h> #include <mach/iomux-mx51.h> -#include <mach/i2c.h> -#include <mach/mxc_ehci.h> #include <asm/irq.h> #include <asm/setup.h> @@ -260,7 +257,7 @@ static void __init efikasb_board_init(void) imx51_add_sdhci_esdhc_imx(1, NULL); platform_device_register(&mx51_efikasb_leds_device); - imx51_add_gpio_keys(&mx51_efikasb_keys_data); + imx_add_gpio_keys(&mx51_efikasb_keys_data); } diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c index 2af3f43..f87d571 100644 --- a/arch/arm/mach-mx5/board-mx53_evk.c +++ b/arch/arm/mach-mx5/board-mx53_evk.c @@ -21,7 +21,6 @@ #include <linux/init.h> #include <linux/clk.h> -#include <linux/fec.h> #include <linux/delay.h> #include <linux/gpio.h> #include <linux/spi/flash.h> @@ -31,7 +30,6 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx53.h> #define MX53_EVK_FEC_PHY_RST IMX_GPIO_NR(7, 6) diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c index 6206b11..1b947e8 100644 --- a/arch/arm/mach-mx5/board-mx53_loco.c +++ b/arch/arm/mach-mx5/board-mx53_loco.c @@ -20,13 +20,11 @@ #include <linux/init.h> #include <linux/clk.h> -#include <linux/fec.h> #include <linux/delay.h> #include <linux/gpio.h> #include <mach/common.h> #include <mach/hardware.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx53.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c index 31e1732..817c089 100644 --- a/arch/arm/mach-mx5/board-mx53_smd.c +++ b/arch/arm/mach-mx5/board-mx53_smd.c @@ -20,13 +20,11 @@ #include <linux/init.h> #include <linux/clk.h> -#include <linux/fec.h> #include <linux/delay.h> #include <linux/gpio.h> #include <mach/common.h> #include <mach/hardware.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx53.h> #include <asm/mach-types.h> @@ -52,6 +50,31 @@ static iomux_v3_cfg_t mx53_smd_pads[] = { /* I2C1 */ MX53_PAD_CSI0_DAT8__I2C1_SDA, MX53_PAD_CSI0_DAT9__I2C1_SCL, + /* SD1 */ + MX53_PAD_SD1_CMD__ESDHC1_CMD, + MX53_PAD_SD1_CLK__ESDHC1_CLK, + MX53_PAD_SD1_DATA0__ESDHC1_DAT0, + MX53_PAD_SD1_DATA1__ESDHC1_DAT1, + MX53_PAD_SD1_DATA2__ESDHC1_DAT2, + MX53_PAD_SD1_DATA3__ESDHC1_DAT3, + /* SD2 */ + MX53_PAD_SD2_CMD__ESDHC2_CMD, + MX53_PAD_SD2_CLK__ESDHC2_CLK, + MX53_PAD_SD2_DATA0__ESDHC2_DAT0, + MX53_PAD_SD2_DATA1__ESDHC2_DAT1, + MX53_PAD_SD2_DATA2__ESDHC2_DAT2, + MX53_PAD_SD2_DATA3__ESDHC2_DAT3, + /* SD3 */ + MX53_PAD_PATA_DATA8__ESDHC3_DAT0, + MX53_PAD_PATA_DATA9__ESDHC3_DAT1, + MX53_PAD_PATA_DATA10__ESDHC3_DAT2, + MX53_PAD_PATA_DATA11__ESDHC3_DAT3, + MX53_PAD_PATA_DATA0__ESDHC3_DAT4, + MX53_PAD_PATA_DATA1__ESDHC3_DAT5, + MX53_PAD_PATA_DATA2__ESDHC3_DAT6, + MX53_PAD_PATA_DATA3__ESDHC3_DAT7, + MX53_PAD_PATA_IORDY__ESDHC3_CLK, + MX53_PAD_PATA_RESET_B__ESDHC3_CMD, }; static const struct imxuart_platform_data mx53_smd_uart_data __initconst = { @@ -97,6 +120,9 @@ static void __init mx53_smd_board_init(void) imx53_add_fec(&mx53_smd_fec_data); imx53_add_imx2_wdt(0, NULL); imx53_add_imx_i2c(0, &mx53_smd_i2c_data); + imx53_add_sdhci_esdhc_imx(0, NULL); + imx53_add_sdhci_esdhc_imx(1, NULL); + imx53_add_sdhci_esdhc_imx(2, NULL); } static void __init mx53_smd_timer_init(void) diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c index fdbc05e..6b89c1b 100644 --- a/arch/arm/mach-mx5/clock-mx51-mx53.c +++ b/arch/arm/mach-mx5/clock-mx51-mx53.c @@ -1563,6 +1563,7 @@ int __init mx53_clocks_init(unsigned long ckil, unsigned long osc, clk_enable(&iim_clk); mx53_revision(); clk_disable(&iim_clk); + mx53_display_revision(); /* Set SDHC parents to be PLL2 */ clk_set_parent(&esdhc1_clk, &pll2_sw_clk); diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c index 472bdfa..86f87da 100644 --- a/arch/arm/mach-mx5/cpu.c +++ b/arch/arm/mach-mx5/cpu.c @@ -166,6 +166,29 @@ int mx50_revision(void) } EXPORT_SYMBOL(mx50_revision); +void mx53_display_revision(void) +{ + int rev; + char *srev; + rev = mx53_revision(); + + switch (rev) { + case IMX_CHIP_REVISION_1_0: + srev = IMX_CHIP_REVISION_1_0_STRING; + break; + case IMX_CHIP_REVISION_2_0: + srev = IMX_CHIP_REVISION_2_0_STRING; + break; + case IMX_CHIP_REVISION_2_1: + srev = IMX_CHIP_REVISION_2_1_STRING; + break; + default: + srev = IMX_CHIP_REVISION_UNKNOWN_STRING; + } + printk(KERN_INFO "CPU identified as i.MX53, silicon rev %s\n", srev); +} +EXPORT_SYMBOL(mx53_display_revision); + static int __init post_cpu_init(void) { unsigned int reg; diff --git a/arch/arm/mach-mx5/devices-imx50.h b/arch/arm/mach-mx5/devices-imx50.h index c9e4282..7216667 100644 --- a/arch/arm/mach-mx5/devices-imx50.h +++ b/arch/arm/mach-mx5/devices-imx50.h @@ -21,14 +21,14 @@ #include <mach/mx50.h> #include <mach/devices-common.h> -extern const struct imx_imx_uart_1irq_data imx50_imx_uart_data[] __initconst; +extern const struct imx_imx_uart_1irq_data imx50_imx_uart_data[]; #define imx50_add_imx_uart(id, pdata) \ imx_add_imx_uart_1irq(&imx50_imx_uart_data[id], pdata) -extern const struct imx_fec_data imx50_fec_data __initconst; +extern const struct imx_fec_data imx50_fec_data; #define imx50_add_fec(pdata) \ imx_add_fec(&imx50_fec_data, pdata) -extern const struct imx_imx_i2c_data imx50_imx_i2c_data[] __initconst; +extern const struct imx_imx_i2c_data imx50_imx_i2c_data[]; #define imx50_add_imx_i2c(id, pdata) \ imx_add_imx_i2c(&imx50_imx_i2c_data[id], pdata) diff --git a/arch/arm/mach-mx5/devices-imx51.h b/arch/arm/mach-mx5/devices-imx51.h index 7fff485..e11bc0e 100644 --- a/arch/arm/mach-mx5/devices-imx51.h +++ b/arch/arm/mach-mx5/devices-imx51.h @@ -9,49 +9,46 @@ #include <mach/mx51.h> #include <mach/devices-common.h> -extern const struct imx_fec_data imx51_fec_data __initconst; +extern const struct imx_fec_data imx51_fec_data; #define imx51_add_fec(pdata) \ imx_add_fec(&imx51_fec_data, pdata) -#define imx51_add_gpio_keys(pdata) imx_add_gpio_keys(pdata) - -extern const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst; +extern const struct imx_imx_i2c_data imx51_imx_i2c_data[]; #define imx51_add_imx_i2c(id, pdata) \ imx_add_imx_i2c(&imx51_imx_i2c_data[id], pdata) -extern const struct imx_imx_ssi_data imx51_imx_ssi_data[] __initconst; +extern const struct imx_imx_ssi_data imx51_imx_ssi_data[]; #define imx51_add_imx_ssi(id, pdata) \ imx_add_imx_ssi(&imx51_imx_ssi_data[id], pdata) -extern const struct imx_imx_uart_1irq_data imx51_imx_uart_data[] __initconst; +extern const struct imx_imx_uart_1irq_data imx51_imx_uart_data[]; #define imx51_add_imx_uart(id, pdata) \ imx_add_imx_uart_1irq(&imx51_imx_uart_data[id], pdata) -extern const struct imx_mxc_nand_data imx51_mxc_nand_data __initconst; +extern const struct imx_mxc_nand_data imx51_mxc_nand_data; #define imx51_add_mxc_nand(pdata) \ imx_add_mxc_nand(&imx51_mxc_nand_data, pdata) -extern const struct imx_sdhci_esdhc_imx_data -imx51_sdhci_esdhc_imx_data[] __initconst; +extern const struct imx_sdhci_esdhc_imx_data imx51_sdhci_esdhc_imx_data[]; #define imx51_add_sdhci_esdhc_imx(id, pdata) \ imx_add_sdhci_esdhc_imx(&imx51_sdhci_esdhc_imx_data[id], pdata) -extern const struct imx_spi_imx_data imx51_cspi_data __initconst; +extern const struct imx_spi_imx_data imx51_cspi_data; #define imx51_add_cspi(pdata) \ imx_add_spi_imx(&imx51_cspi_data, pdata) -extern const struct imx_spi_imx_data imx51_ecspi_data[] __initconst; +extern const struct imx_spi_imx_data imx51_ecspi_data[]; #define imx51_add_ecspi(id, pdata) \ imx_add_spi_imx(&imx51_ecspi_data[id], pdata) -extern const struct imx_imx2_wdt_data imx51_imx2_wdt_data[] __initconst; +extern const struct imx_imx2_wdt_data imx51_imx2_wdt_data[]; #define imx51_add_imx2_wdt(id, pdata) \ imx_add_imx2_wdt(&imx51_imx2_wdt_data[id]) -extern const struct imx_mxc_pwm_data imx51_mxc_pwm_data[] __initconst; +extern const struct imx_mxc_pwm_data imx51_mxc_pwm_data[]; #define imx51_add_mxc_pwm(id) \ imx_add_mxc_pwm(&imx51_mxc_pwm_data[id]) -extern const struct imx_imx_keypad_data imx51_imx_keypad_data __initconst; +extern const struct imx_imx_keypad_data imx51_imx_keypad_data; #define imx51_add_imx_keypad(pdata) \ imx_add_imx_keypad(&imx51_imx_keypad_data, pdata) diff --git a/arch/arm/mach-mx5/devices-imx53.h b/arch/arm/mach-mx5/devices-imx53.h index 9251008..48f4c8c 100644 --- a/arch/arm/mach-mx5/devices-imx53.h +++ b/arch/arm/mach-mx5/devices-imx53.h @@ -8,28 +8,27 @@ #include <mach/mx53.h> #include <mach/devices-common.h> -extern const struct imx_fec_data imx53_fec_data __initconst; +extern const struct imx_fec_data imx53_fec_data; #define imx53_add_fec(pdata) \ imx_add_fec(&imx53_fec_data, pdata) -extern const struct imx_imx_uart_1irq_data imx53_imx_uart_data[] __initconst; +extern const struct imx_imx_uart_1irq_data imx53_imx_uart_data[]; #define imx53_add_imx_uart(id, pdata) \ imx_add_imx_uart_1irq(&imx53_imx_uart_data[id], pdata) -extern const struct imx_imx_i2c_data imx53_imx_i2c_data[] __initconst; +extern const struct imx_imx_i2c_data imx53_imx_i2c_data[]; #define imx53_add_imx_i2c(id, pdata) \ imx_add_imx_i2c(&imx53_imx_i2c_data[id], pdata) -extern const struct imx_sdhci_esdhc_imx_data -imx53_sdhci_esdhc_imx_data[] __initconst; +extern const struct imx_sdhci_esdhc_imx_data imx53_sdhci_esdhc_imx_data[]; #define imx53_add_sdhci_esdhc_imx(id, pdata) \ imx_add_sdhci_esdhc_imx(&imx53_sdhci_esdhc_imx_data[id], pdata) -extern const struct imx_spi_imx_data imx53_ecspi_data[] __initconst; +extern const struct imx_spi_imx_data imx53_ecspi_data[]; #define imx53_add_ecspi(id, pdata) \ imx_add_spi_imx(&imx53_ecspi_data[id], pdata) -extern const struct imx_imx2_wdt_data imx53_imx2_wdt_data[] __initconst; +extern const struct imx_imx2_wdt_data imx53_imx2_wdt_data[]; #define imx53_add_imx2_wdt(id, pdata) \ imx_add_imx2_wdt(&imx53_imx2_wdt_data[id]) diff --git a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c index 4a85505..97292d2 100644 --- a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c +++ b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c @@ -18,13 +18,11 @@ #include <linux/io.h> #include <linux/interrupt.h> #include <linux/irq.h> -#include <linux/fsl_devices.h> #include <linux/i2c/tsc2007.h> #include <linux/leds.h> #include <mach/common.h> #include <mach/hardware.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx51.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c index e6c1119..31c871e 100644 --- a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c +++ b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c @@ -27,7 +27,6 @@ #include <linux/irq.h> #include <linux/leds.h> #include <linux/platform_device.h> -#include <linux/gpio_keys.h> #include <linux/input.h> #include <linux/i2c.h> @@ -38,7 +37,6 @@ #include <mach/hardware.h> #include <mach/common.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx51.h> #include <mach/audmux.h> @@ -108,23 +106,14 @@ static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = { }, }; -static struct gpio_keys_platform_data eukrea_mbimxsd_button_data = { +static const struct gpio_keys_platform_data + eukrea_mbimxsd_button_data __initconst = { .buttons = eukrea_mbimxsd_gpio_buttons, .nbuttons = ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons), }; -static struct platform_device eukrea_mbimxsd_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &eukrea_mbimxsd_button_data, - } -}; - static struct platform_device *platform_devices[] __initdata = { &eukrea_mbimxsd_leds_gpio, - &eukrea_mbimxsd_button_device, }; static const struct imxuart_platform_data uart_pdata __initconst = { @@ -166,4 +155,5 @@ void __init eukrea_mbimxsd51_baseboard_init(void) ARRAY_SIZE(eukrea_mbimxsd_i2c_devices)); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); + imx_add_gpio_keys(&eukrea_mbimxsd_button_data); } diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-mx5/mx51_efika.c index d0c7075..56739c2 100644 --- a/arch/arm/mach-mx5/mx51_efika.c +++ b/arch/arm/mach-mx5/mx51_efika.c @@ -20,7 +20,6 @@ #include <linux/input.h> #include <linux/delay.h> #include <linux/io.h> -#include <linux/fsl_devices.h> #include <linux/spi/flash.h> #include <linux/spi/spi.h> #include <linux/mfd/mc13892.h> @@ -30,8 +29,6 @@ #include <mach/common.h> #include <mach/hardware.h> #include <mach/iomux-mx51.h> -#include <mach/i2c.h> -#include <mach/mxc_ehci.h> #include <linux/usb/otg.h> #include <linux/usb/ulpi.h> diff --git a/arch/arm/mach-mxc91231/Kconfig b/arch/arm/mach-mxc91231/Kconfig deleted file mode 100644 index 8e5fa38..0000000 --- a/arch/arm/mach-mxc91231/Kconfig +++ /dev/null @@ -1,11 +0,0 @@ -if ARCH_MXC91231 - -comment "MXC91231 platforms:" - -config MACH_MAGX_ZN5 - bool "Support Motorola Zn5 GSM phone" - default n - help - Include support for Motorola Zn5 GSM phone. - -endif diff --git a/arch/arm/mach-mxc91231/Makefile b/arch/arm/mach-mxc91231/Makefile deleted file mode 100644 index 011d5e1..0000000 --- a/arch/arm/mach-mxc91231/Makefile +++ /dev/null @@ -1,2 +0,0 @@ -obj-y := mm.o clock.o devices.o system.o iomux.o -obj-$(CONFIG_MACH_MAGX_ZN5) += magx-zn5.o diff --git a/arch/arm/mach-mxc91231/Makefile.boot b/arch/arm/mach-mxc91231/Makefile.boot deleted file mode 100644 index 9939a19..0000000 --- a/arch/arm/mach-mxc91231/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ - zreladdr-y := 0x90008000 -params_phys-y := 0x90000100 -initrd_phys-y := 0x90800000 diff --git a/arch/arm/mach-mxc91231/clock.c b/arch/arm/mach-mxc91231/clock.c deleted file mode 100644 index 9fab505..0000000 --- a/arch/arm/mach-mxc91231/clock.c +++ /dev/null @@ -1,640 +0,0 @@ -#include <linux/clk.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/clkdev.h> - -#include <mach/clock.h> -#include <mach/hardware.h> -#include <mach/common.h> - -#include <asm/bug.h> -#include <asm/div64.h> - -#include "crm_regs.h" - -#define CRM_SMALL_DIVIDER(base, name) \ - crm_small_divider(base, \ - base ## _ ## name ## _OFFSET, \ - base ## _ ## name ## _MASK) -#define CRM_1DIVIDER(base, name) \ - crm_divider(base, \ - base ## _ ## name ## _OFFSET, \ - base ## _ ## name ## _MASK, 1) -#define CRM_16DIVIDER(base, name) \ - crm_divider(base, \ - base ## _ ## name ## _OFFSET, \ - base ## _ ## name ## _MASK, 16) - -static u32 crm_small_divider(void __iomem *reg, u8 offset, u32 mask) -{ - static const u32 crm_small_dividers[] = { - 2, 3, 4, 5, 6, 8, 10, 12 - }; - u8 idx; - - idx = (__raw_readl(reg) & mask) >> offset; - if (idx > 7) - return 1; - - return crm_small_dividers[idx]; -} - -static u32 crm_divider(void __iomem *reg, u8 offset, u32 mask, u32 z) -{ - u32 div; - div = (__raw_readl(reg) & mask) >> offset; - return div ? div : z; -} - -static int _clk_1bit_enable(struct clk *clk) -{ - u32 reg; - - reg = __raw_readl(clk->enable_reg); - reg |= 1 << clk->enable_shift; - __raw_writel(reg, clk->enable_reg); - - return 0; -} - -static void _clk_1bit_disable(struct clk *clk) -{ - u32 reg; - - reg = __raw_readl(clk->enable_reg); - reg &= ~(1 << clk->enable_shift); - __raw_writel(reg, clk->enable_reg); -} - -static int _clk_3bit_enable(struct clk *clk) -{ - u32 reg; - - reg = __raw_readl(clk->enable_reg); - reg |= 0x7 << clk->enable_shift; - __raw_writel(reg, clk->enable_reg); - - return 0; -} - -static void _clk_3bit_disable(struct clk *clk) -{ - u32 reg; - - reg = __raw_readl(clk->enable_reg); - reg &= ~(0x7 << clk->enable_shift); - __raw_writel(reg, clk->enable_reg); -} - -static unsigned long ckih_rate; - -static unsigned long clk_ckih_get_rate(struct clk *clk) -{ - return ckih_rate; -} - -static struct clk ckih_clk = { - .get_rate = clk_ckih_get_rate, -}; - -static unsigned long clk_ckih_x2_get_rate(struct clk *clk) -{ - return 2 * clk_get_rate(clk->parent); -} - -static struct clk ckih_x2_clk = { - .parent = &ckih_clk, - .get_rate = clk_ckih_x2_get_rate, -}; - -static unsigned long clk_ckil_get_rate(struct clk *clk) -{ - return CKIL_CLK_FREQ; -} - -static struct clk ckil_clk = { - .get_rate = clk_ckil_get_rate, -}; - -/* plls stuff */ -static struct clk mcu_pll_clk; -static struct clk dsp_pll_clk; -static struct clk usb_pll_clk; - -static struct clk *pll_clk(u8 sel) -{ - switch (sel) { - case 0: - return &mcu_pll_clk; - case 1: - return &dsp_pll_clk; - case 2: - return &usb_pll_clk; - } - BUG(); -} - -static void __iomem *pll_base(struct clk *clk) -{ - if (clk == &mcu_pll_clk) - return MXC_PLL0_BASE; - else if (clk == &dsp_pll_clk) - return MXC_PLL1_BASE; - else if (clk == &usb_pll_clk) - return MXC_PLL2_BASE; - BUG(); -} - -static unsigned long clk_pll_get_rate(struct clk *clk) -{ - const void __iomem *pllbase; - unsigned long dp_op, dp_mfd, dp_mfn, pll_hfsm, ref_clk, mfi; - long mfn, mfn_abs, mfd, pdf; - s64 temp; - pllbase = pll_base(clk); - - pll_hfsm = __raw_readl(pllbase + MXC_PLL_DP_CTL) & MXC_PLL_DP_CTL_HFSM; - if (pll_hfsm == 0) { - dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP); - dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD); - dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN); - } else { - dp_op = __raw_readl(pllbase + MXC_PLL_DP_HFS_OP); - dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFD); - dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFN); - } - - pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK; - mfi = (dp_op >> MXC_PLL_DP_OP_MFI_OFFSET) & MXC_PLL_DP_OP_PDF_MASK; - mfi = (mfi <= 5) ? 5 : mfi; - mfd = dp_mfd & MXC_PLL_DP_MFD_MASK; - mfn = dp_mfn & MXC_PLL_DP_MFN_MASK; - mfn = (mfn <= 0x4000000) ? mfn : (mfn - 0x10000000); - - if (mfn < 0) - mfn_abs = -mfn; - else - mfn_abs = mfn; - -/* XXX: actually this asumes that ckih is fed to pll, but spec says - * that ckih_x2 is also possible. need to check this out. - */ - ref_clk = clk_get_rate(&ckih_clk); - - ref_clk *= 2; - ref_clk /= pdf + 1; - - temp = (u64) ref_clk * mfn_abs; - do_div(temp, mfd); - if (mfn < 0) - temp = -temp; - temp += ref_clk * mfi; - - return temp; -} - -static int clk_pll_enable(struct clk *clk) -{ - void __iomem *ctl; - u32 reg; - - ctl = pll_base(clk); - reg = __raw_readl(ctl); - reg |= (MXC_PLL_DP_CTL_RST | MXC_PLL_DP_CTL_UPEN); - __raw_writel(reg, ctl); - do { - reg = __raw_readl(ctl); - } while ((reg & MXC_PLL_DP_CTL_LRF) != MXC_PLL_DP_CTL_LRF); - return 0; -} - -static void clk_pll_disable(struct clk *clk) -{ - void __iomem *ctl; - u32 reg; - - ctl = pll_base(clk); - reg = __raw_readl(ctl); - reg &= ~(MXC_PLL_DP_CTL_RST | MXC_PLL_DP_CTL_UPEN); - __raw_writel(reg, ctl); -} - -static struct clk mcu_pll_clk = { - .parent = &ckih_clk, - .get_rate = clk_pll_get_rate, - .enable = clk_pll_enable, - .disable = clk_pll_disable, -}; - -static struct clk dsp_pll_clk = { - .parent = &ckih_clk, - .get_rate = clk_pll_get_rate, - .enable = clk_pll_enable, - .disable = clk_pll_disable, -}; - -static struct clk usb_pll_clk = { - .parent = &ckih_clk, - .get_rate = clk_pll_get_rate, - .enable = clk_pll_enable, - .disable = clk_pll_disable, -}; -/* plls stuff end */ - -/* ap_ref_clk stuff */ -static struct clk ap_ref_clk; - -static unsigned long clk_ap_ref_get_rate(struct clk *clk) -{ - u32 ascsr, acsr; - u8 ap_pat_ref_div_2, ap_isel, acs, ads; - - ascsr = __raw_readl(MXC_CRMAP_ASCSR); - acsr = __raw_readl(MXC_CRMAP_ACSR); - - /* 0 for ckih, 1 for ckih*2 */ - ap_isel = ascsr & MXC_CRMAP_ASCSR_APISEL; - /* reg divider */ - ap_pat_ref_div_2 = (ascsr >> MXC_CRMAP_ASCSR_AP_PATDIV2_OFFSET) & 0x1; - /* undocumented, 1 for disabling divider */ - ads = (acsr >> MXC_CRMAP_ACSR_ADS_OFFSET) & 0x1; - /* 0 for pat_ref, 1 for divider out */ - acs = acsr & MXC_CRMAP_ACSR_ACS; - - if (acs & !ads) - /* use divided clock */ - return clk_get_rate(clk->parent) / (ap_pat_ref_div_2 ? 2 : 1); - - return clk_get_rate(clk->parent) * (ap_isel ? 2 : 1); -} - -static struct clk ap_ref_clk = { - .parent = &ckih_clk, - .get_rate = clk_ap_ref_get_rate, -}; -/* ap_ref_clk stuff end */ - -/* ap_pre_dfs_clk stuff */ -static struct clk ap_pre_dfs_clk; - -static unsigned long clk_ap_pre_dfs_get_rate(struct clk *clk) -{ - u32 acsr, ascsr; - - acsr = __raw_readl(MXC_CRMAP_ACSR); - ascsr = __raw_readl(MXC_CRMAP_ASCSR); - - if (acsr & MXC_CRMAP_ACSR_ACS) { - u8 sel; - sel = (ascsr & MXC_CRMAP_ASCSR_APSEL_MASK) >> - MXC_CRMAP_ASCSR_APSEL_OFFSET; - return clk_get_rate(pll_clk(sel)) / - CRM_SMALL_DIVIDER(MXC_CRMAP_ACDR, ARMDIV); - } - return clk_get_rate(&ap_ref_clk); -} - -static struct clk ap_pre_dfs_clk = { - .get_rate = clk_ap_pre_dfs_get_rate, -}; -/* ap_pre_dfs_clk stuff end */ - -/* usb_clk stuff */ -static struct clk usb_clk; - -static struct clk *clk_usb_parent(struct clk *clk) -{ - u32 acsr, ascsr; - - acsr = __raw_readl(MXC_CRMAP_ACSR); - ascsr = __raw_readl(MXC_CRMAP_ASCSR); - - if (acsr & MXC_CRMAP_ACSR_ACS) { - u8 sel; - sel = (ascsr & MXC_CRMAP_ASCSR_USBSEL_MASK) >> - MXC_CRMAP_ASCSR_USBSEL_OFFSET; - return pll_clk(sel); - } - return &ap_ref_clk; -} - -static unsigned long clk_usb_get_rate(struct clk *clk) -{ - return clk_get_rate(clk->parent) / - CRM_SMALL_DIVIDER(MXC_CRMAP_ACDER2, USBDIV); -} - -static struct clk usb_clk = { - .enable_reg = MXC_CRMAP_ACDER2, - .enable_shift = MXC_CRMAP_ACDER2_USBEN_OFFSET, - .get_rate = clk_usb_get_rate, - .enable = _clk_1bit_enable, - .disable = _clk_1bit_disable, -}; -/* usb_clk stuff end */ - -static unsigned long clk_ipg_get_rate(struct clk *clk) -{ - return clk_get_rate(clk->parent) / CRM_16DIVIDER(MXC_CRMAP_ACDR, IPDIV); -} - -static unsigned long clk_ahb_get_rate(struct clk *clk) -{ - return clk_get_rate(clk->parent) / - CRM_16DIVIDER(MXC_CRMAP_ACDR, AHBDIV); -} - -static struct clk ipg_clk = { - .parent = &ap_pre_dfs_clk, - .get_rate = clk_ipg_get_rate, -}; - -static struct clk ahb_clk = { - .parent = &ap_pre_dfs_clk, - .get_rate = clk_ahb_get_rate, -}; - -/* perclk_clk stuff */ -static struct clk perclk_clk; - -static unsigned long clk_perclk_get_rate(struct clk *clk) -{ - u32 acder2; - - acder2 = __raw_readl(MXC_CRMAP_ACDER2); - if (acder2 & MXC_CRMAP_ACDER2_BAUD_ISEL_MASK) - return 2 * clk_get_rate(clk->parent); - - return clk_get_rate(clk->parent); -} - -static struct clk perclk_clk = { - .parent = &ckih_clk, - .get_rate = clk_perclk_get_rate, -}; -/* perclk_clk stuff end */ - -/* uart_clk stuff */ -static struct clk uart_clk[]; - -static unsigned long clk_uart_get_rate(struct clk *clk) -{ - u32 div; - - switch (clk->id) { - case 0: - case 1: - div = CRM_SMALL_DIVIDER(MXC_CRMAP_ACDER2, BAUDDIV); - break; - case 2: - div = CRM_SMALL_DIVIDER(MXC_CRMAP_APRA, UART3DIV); - break; - default: - BUG(); - } - return clk_get_rate(clk->parent) / div; -} - -static struct clk uart_clk[] = { - { - .id = 0, - .parent = &perclk_clk, - .enable_reg = MXC_CRMAP_APRA, - .enable_shift = MXC_CRMAP_APRA_UART1EN_OFFSET, - .get_rate = clk_uart_get_rate, - .enable = _clk_1bit_enable, - .disable = _clk_1bit_disable, - }, { - .id = 1, - .parent = &perclk_clk, - .enable_reg = MXC_CRMAP_APRA, - .enable_shift = MXC_CRMAP_APRA_UART2EN_OFFSET, - .get_rate = clk_uart_get_rate, - .enable = _clk_1bit_enable, - .disable = _clk_1bit_disable, - }, { - .id = 2, - .parent = &perclk_clk, - .enable_reg = MXC_CRMAP_APRA, - .enable_shift = MXC_CRMAP_APRA_UART3EN_OFFSET, - .get_rate = clk_uart_get_rate, - .enable = _clk_1bit_enable, - .disable = _clk_1bit_disable, - }, -}; -/* uart_clk stuff end */ - -/* sdhc_clk stuff */ -static struct clk nfc_clk; - -static unsigned long clk_nfc_get_rate(struct clk *clk) -{ - return clk_get_rate(clk->parent) / - CRM_1DIVIDER(MXC_CRMAP_ACDER2, NFCDIV); -} - -static struct clk nfc_clk = { - .parent = &ahb_clk, - .enable_reg = MXC_CRMAP_ACDER2, - .enable_shift = MXC_CRMAP_ACDER2_NFCEN_OFFSET, - .get_rate = clk_nfc_get_rate, - .enable = _clk_1bit_enable, - .disable = _clk_1bit_disable, -}; -/* sdhc_clk stuff end */ - -/* sdhc_clk stuff */ -static struct clk sdhc_clk[]; - -static struct clk *clk_sdhc_parent(struct clk *clk) -{ - u32 aprb; - u8 sel; - u32 mask; - int offset; - - aprb = __raw_readl(MXC_CRMAP_APRB); - - switch (clk->id) { - case 0: - mask = MXC_CRMAP_APRB_SDHC1_ISEL_MASK; - offset = MXC_CRMAP_APRB_SDHC1_ISEL_OFFSET; - break; - case 1: - mask = MXC_CRMAP_APRB_SDHC2_ISEL_MASK; - offset = MXC_CRMAP_APRB_SDHC2_ISEL_OFFSET; - break; - default: - BUG(); - } - sel = (aprb & mask) >> offset; - - switch (sel) { - case 0: - return &ckih_clk; - case 1: - return &ckih_x2_clk; - } - return &usb_clk; -} - -static unsigned long clk_sdhc_get_rate(struct clk *clk) -{ - u32 div; - - switch (clk->id) { - case 0: - div = CRM_SMALL_DIVIDER(MXC_CRMAP_APRB, SDHC1_DIV); - break; - case 1: - div = CRM_SMALL_DIVIDER(MXC_CRMAP_APRB, SDHC2_DIV); - break; - default: - BUG(); - } - - return clk_get_rate(clk->parent) / div; -} - -static int clk_sdhc_enable(struct clk *clk) -{ - u32 amlpmre1, aprb; - - amlpmre1 = __raw_readl(MXC_CRMAP_AMLPMRE1); - aprb = __raw_readl(MXC_CRMAP_APRB); - switch (clk->id) { - case 0: - amlpmre1 |= (0x7 << MXC_CRMAP_AMLPMRE1_MLPME4_OFFSET); - aprb |= (0x1 << MXC_CRMAP_APRB_SDHC1EN_OFFSET); - break; - case 1: - amlpmre1 |= (0x7 << MXC_CRMAP_AMLPMRE1_MLPME5_OFFSET); - aprb |= (0x1 << MXC_CRMAP_APRB_SDHC2EN_OFFSET); - break; - } - __raw_writel(amlpmre1, MXC_CRMAP_AMLPMRE1); - __raw_writel(aprb, MXC_CRMAP_APRB); - return 0; -} - -static void clk_sdhc_disable(struct clk *clk) -{ - u32 amlpmre1, aprb; - - amlpmre1 = __raw_readl(MXC_CRMAP_AMLPMRE1); - aprb = __raw_readl(MXC_CRMAP_APRB); - switch (clk->id) { - case 0: - amlpmre1 &= ~(0x7 << MXC_CRMAP_AMLPMRE1_MLPME4_OFFSET); - aprb &= ~(0x1 << MXC_CRMAP_APRB_SDHC1EN_OFFSET); - break; - case 1: - amlpmre1 &= ~(0x7 << MXC_CRMAP_AMLPMRE1_MLPME5_OFFSET); - aprb &= ~(0x1 << MXC_CRMAP_APRB_SDHC2EN_OFFSET); - break; - } - __raw_writel(amlpmre1, MXC_CRMAP_AMLPMRE1); - __raw_writel(aprb, MXC_CRMAP_APRB); -} - -static struct clk sdhc_clk[] = { - { - .id = 0, - .get_rate = clk_sdhc_get_rate, - .enable = clk_sdhc_enable, - .disable = clk_sdhc_disable, - }, { - .id = 1, - .get_rate = clk_sdhc_get_rate, - .enable = clk_sdhc_enable, - .disable = clk_sdhc_disable, - }, -}; -/* sdhc_clk stuff end */ - -/* wdog_clk stuff */ -static struct clk wdog_clk[] = { - { - .id = 0, - .parent = &ipg_clk, - .enable_reg = MXC_CRMAP_AMLPMRD, - .enable_shift = MXC_CRMAP_AMLPMRD_MLPMD7_OFFSET, - .enable = _clk_3bit_enable, - .disable = _clk_3bit_disable, - }, { - .id = 1, - .parent = &ipg_clk, - .enable_reg = MXC_CRMAP_AMLPMRD, - .enable_shift = MXC_CRMAP_AMLPMRD_MLPMD3_OFFSET, - .enable = _clk_3bit_enable, - .disable = _clk_3bit_disable, - }, -}; -/* wdog_clk stuff end */ - -/* gpt_clk stuff */ -static struct clk gpt_clk = { - .parent = &ipg_clk, - .enable_reg = MXC_CRMAP_AMLPMRC, - .enable_shift = MXC_CRMAP_AMLPMRC_MLPMC4_OFFSET, - .enable = _clk_3bit_enable, - .disable = _clk_3bit_disable, -}; -/* gpt_clk stuff end */ - -/* cspi_clk stuff */ -static struct clk cspi_clk[] = { - { - .id = 0, - .parent = &ipg_clk, - .enable_reg = MXC_CRMAP_AMLPMRE2, - .enable_shift = MXC_CRMAP_AMLPMRE2_MLPME0_OFFSET, - .enable = _clk_3bit_enable, - .disable = _clk_3bit_disable, - }, { - .id = 1, - .parent = &ipg_clk, - .enable_reg = MXC_CRMAP_AMLPMRE1, - .enable_shift = MXC_CRMAP_AMLPMRE1_MLPME6_OFFSET, - .enable = _clk_3bit_enable, - .disable = _clk_3bit_disable, - }, -}; -/* cspi_clk stuff end */ - -#define _REGISTER_CLOCK(d, n, c) \ - { \ - .dev_id = d, \ - .con_id = n, \ - .clk = &c, \ - }, - -static struct clk_lookup lookups[] = { - _REGISTER_CLOCK("imx-uart.0", NULL, uart_clk[0]) - _REGISTER_CLOCK("imx-uart.1", NULL, uart_clk[1]) - _REGISTER_CLOCK("imx-uart.2", NULL, uart_clk[2]) - _REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc_clk[0]) - _REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc_clk[1]) - _REGISTER_CLOCK("mxc-wdt.0", NULL, wdog_clk[0]) - _REGISTER_CLOCK("spi_imx.0", NULL, cspi_clk[0]) - _REGISTER_CLOCK("spi_imx.1", NULL, cspi_clk[1]) -}; - -int __init mxc91231_clocks_init(unsigned long fref) -{ - void __iomem *gpt_base; - - ckih_rate = fref; - - usb_clk.parent = clk_usb_parent(&usb_clk); - sdhc_clk[0].parent = clk_sdhc_parent(&sdhc_clk[0]); - sdhc_clk[1].parent = clk_sdhc_parent(&sdhc_clk[1]); - - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); - - gpt_base = MXC91231_IO_ADDRESS(MXC91231_GPT1_BASE_ADDR); - mxc_timer_init(&gpt_clk, gpt_base, MXC91231_INT_GPT); - - return 0; -} diff --git a/arch/arm/mach-mxc91231/crm_regs.h b/arch/arm/mach-mxc91231/crm_regs.h deleted file mode 100644 index b989bac..0000000 --- a/arch/arm/mach-mxc91231/crm_regs.h +++ /dev/null @@ -1,394 +0,0 @@ -/* - * Copyright 2006 Freescale Semiconductor, Inc. - * Copyright 2006-2007 Motorola, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef _ARCH_ARM_MACH_MXC91231_CRM_REGS_H_ -#define _ARCH_ARM_MACH_MXC91231_CRM_REGS_H_ - -#define CKIL_CLK_FREQ 32768 - -#define MXC_CRM_AP_BASE MXC91231_IO_ADDRESS(MXC91231_CRM_AP_BASE_ADDR) -#define MXC_CRM_COM_BASE MXC91231_IO_ADDRESS(MXC91231_CRM_COM_BASE_ADDR) -#define MXC_DSM_BASE MXC91231_IO_ADDRESS(MXC91231_DSM_BASE_ADDR) -#define MXC_PLL0_BASE MXC91231_IO_ADDRESS(MXC91231_PLL0_BASE_ADDR) -#define MXC_PLL1_BASE MXC91231_IO_ADDRESS(MXC91231_PLL1_BASE_ADDR) -#define MXC_PLL2_BASE MXC91231_IO_ADDRESS(MXC91231_PLL2_BASE_ADDR) -#define MXC_CLKCTL_BASE MXC91231_IO_ADDRESS(MXC91231_CLKCTL_BASE_ADDR) - -/* PLL Register Offsets */ -#define MXC_PLL_DP_CTL 0x00 -#define MXC_PLL_DP_CONFIG 0x04 -#define MXC_PLL_DP_OP 0x08 -#define MXC_PLL_DP_MFD 0x0C -#define MXC_PLL_DP_MFN 0x10 -#define MXC_PLL_DP_HFS_OP 0x1C -#define MXC_PLL_DP_HFS_MFD 0x20 -#define MXC_PLL_DP_HFS_MFN 0x24 - -/* PLL Register Bit definitions */ -#define MXC_PLL_DP_CTL_DPDCK0_2_EN 0x1000 -#define MXC_PLL_DP_CTL_ADE 0x800 -#define MXC_PLL_DP_CTL_REF_CLK_DIV 0x400 -#define MXC_PLL_DP_CTL_HFSM 0x80 -#define MXC_PLL_DP_CTL_PRE 0x40 -#define MXC_PLL_DP_CTL_UPEN 0x20 -#define MXC_PLL_DP_CTL_RST 0x10 -#define MXC_PLL_DP_CTL_RCP 0x8 -#define MXC_PLL_DP_CTL_PLM 0x4 -#define MXC_PLL_DP_CTL_BRM0 0x2 -#define MXC_PLL_DP_CTL_LRF 0x1 - -#define MXC_PLL_DP_OP_MFI_OFFSET 4 -#define MXC_PLL_DP_OP_MFI_MASK 0xF -#define MXC_PLL_DP_OP_PDF_OFFSET 0 -#define MXC_PLL_DP_OP_PDF_MASK 0xF - -#define MXC_PLL_DP_MFD_OFFSET 0 -#define MXC_PLL_DP_MFD_MASK 0x7FFFFFF - -#define MXC_PLL_DP_MFN_OFFSET 0 -#define MXC_PLL_DP_MFN_MASK 0x7FFFFFF - -/* CRM AP Register Offsets */ -#define MXC_CRMAP_ASCSR (MXC_CRM_AP_BASE + 0x00) -#define MXC_CRMAP_ACDR (MXC_CRM_AP_BASE + 0x04) -#define MXC_CRMAP_ACDER1 (MXC_CRM_AP_BASE + 0x08) -#define MXC_CRMAP_ACDER2 (MXC_CRM_AP_BASE + 0x0C) -#define MXC_CRMAP_ACGCR (MXC_CRM_AP_BASE + 0x10) -#define MXC_CRMAP_ACCGCR (MXC_CRM_AP_BASE + 0x14) -#define MXC_CRMAP_AMLPMRA (MXC_CRM_AP_BASE + 0x18) -#define MXC_CRMAP_AMLPMRB (MXC_CRM_AP_BASE + 0x1C) -#define MXC_CRMAP_AMLPMRC (MXC_CRM_AP_BASE + 0x20) -#define MXC_CRMAP_AMLPMRD (MXC_CRM_AP_BASE + 0x24) -#define MXC_CRMAP_AMLPMRE1 (MXC_CRM_AP_BASE + 0x28) -#define MXC_CRMAP_AMLPMRE2 (MXC_CRM_AP_BASE + 0x2C) -#define MXC_CRMAP_AMLPMRF (MXC_CRM_AP_BASE + 0x30) -#define MXC_CRMAP_AMLPMRG (MXC_CRM_AP_BASE + 0x34) -#define MXC_CRMAP_APGCR (MXC_CRM_AP_BASE + 0x38) -#define MXC_CRMAP_ACSR (MXC_CRM_AP_BASE + 0x3C) -#define MXC_CRMAP_ADCR (MXC_CRM_AP_BASE + 0x40) -#define MXC_CRMAP_ACR (MXC_CRM_AP_BASE + 0x44) -#define MXC_CRMAP_AMCR (MXC_CRM_AP_BASE + 0x48) -#define MXC_CRMAP_APCR (MXC_CRM_AP_BASE + 0x4C) -#define MXC_CRMAP_AMORA (MXC_CRM_AP_BASE + 0x50) -#define MXC_CRMAP_AMORB (MXC_CRM_AP_BASE + 0x54) -#define MXC_CRMAP_AGPR (MXC_CRM_AP_BASE + 0x58) -#define MXC_CRMAP_APRA (MXC_CRM_AP_BASE + 0x5C) -#define MXC_CRMAP_APRB (MXC_CRM_AP_BASE + 0x60) -#define MXC_CRMAP_APOR (MXC_CRM_AP_BASE + 0x64) -#define MXC_CRMAP_ADFMR (MXC_CRM_AP_BASE + 0x68) - -/* CRM AP Register Bit definitions */ -#define MXC_CRMAP_ASCSR_CRS 0x10000 -#define MXC_CRMAP_ASCSR_AP_PATDIV2_OFFSET 15 -#define MXC_CRMAP_ASCSR_AP_PATREF_DIV2 0x8000 -#define MXC_CRMAP_ASCSR_USBSEL_OFFSET 13 -#define MXC_CRMAP_ASCSR_USBSEL_MASK (0x3 << 13) -#define MXC_CRMAP_ASCSR_CSISEL_OFFSET 11 -#define MXC_CRMAP_ASCSR_CSISEL_MASK (0x3 << 11) -#define MXC_CRMAP_ASCSR_SSI2SEL_OFFSET 7 -#define MXC_CRMAP_ASCSR_SSI2SEL_MASK (0x3 << 7) -#define MXC_CRMAP_ASCSR_SSI1SEL_OFFSET 5 -#define MXC_CRMAP_ASCSR_SSI1SEL_MASK (0x3 << 5) -#define MXC_CRMAP_ASCSR_APSEL_OFFSET 3 -#define MXC_CRMAP_ASCSR_APSEL_MASK (0x3 << 3) -#define MXC_CRMAP_ASCSR_AP_PATDIV1_OFFSET 2 -#define MXC_CRMAP_ASCSR_AP_PATREF_DIV1 0x4 -#define MXC_CRMAP_ASCSR_APISEL 0x1 - -#define MXC_CRMAP_ACDR_ARMDIV_OFFSET 8 -#define MXC_CRMAP_ACDR_ARMDIV_MASK (0xF << 8) -#define MXC_CRMAP_ACDR_AHBDIV_OFFSET 4 -#define MXC_CRMAP_ACDR_AHBDIV_MASK (0xF << 4) -#define MXC_CRMAP_ACDR_IPDIV_OFFSET 0 -#define MXC_CRMAP_ACDR_IPDIV_MASK 0xF - -#define MXC_CRMAP_ACDER1_CSIEN_OFFSET 30 -#define MXC_CRMAP_ACDER1_CSIDIV_OFFSET 24 -#define MXC_CRMAP_ACDER1_CSIDIV_MASK (0x3F << 24) -#define MXC_CRMAP_ACDER1_SSI2EN_OFFSET 14 -#define MXC_CRMAP_ACDER1_SSI2DIV_OFFSET 8 -#define MXC_CRMAP_ACDER1_SSI2DIV_MASK (0x3F << 8) -#define MXC_CRMAP_ACDER1_SSI1EN_OFFSET 6 -#define MXC_CRMAP_ACDER1_SSI1DIV_OFFSET 0 -#define MXC_CRMAP_ACDER1_SSI1DIV_MASK 0x3F - -#define MXC_CRMAP_ACDER2_CRCT_CLK_DIV_OFFSET 24 -#define MXC_CRMAP_ACDER2_CRCT_CLK_DIV_MASK (0x7 << 24) -#define MXC_CRMAP_ACDER2_NFCEN_OFFSET 20 -#define MXC_CRMAP_ACDER2_NFCDIV_OFFSET 16 -#define MXC_CRMAP_ACDER2_NFCDIV_MASK (0xF << 16) -#define MXC_CRMAP_ACDER2_USBEN_OFFSET 12 -#define MXC_CRMAP_ACDER2_USBDIV_OFFSET 8 -#define MXC_CRMAP_ACDER2_USBDIV_MASK (0xF << 8) -#define MXC_CRMAP_ACDER2_BAUD_ISEL_OFFSET 5 -#define MXC_CRMAP_ACDER2_BAUD_ISEL_MASK (0x3 << 5) -#define MXC_CRMAP_ACDER2_BAUDDIV_OFFSET 0 -#define MXC_CRMAP_ACDER2_BAUDDIV_MASK 0xF - -#define MXC_CRMAP_AMLPMRA_MLPMA7_OFFSET 22 -#define MXC_CRMAP_AMLPMRA_MLPMA7_MASK (0x7 << 22) -#define MXC_CRMAP_AMLPMRA_MLPMA6_OFFSET 19 -#define MXC_CRMAP_AMLPMRA_MLPMA6_MASK (0x7 << 19) -#define MXC_CRMAP_AMLPMRA_MLPMA4_OFFSET 12 -#define MXC_CRMAP_AMLPMRA_MLPMA4_MASK (0x7 << 12) -#define MXC_CRMAP_AMLPMRA_MLPMA3_OFFSET 9 -#define MXC_CRMAP_AMLPMRA_MLPMA3_MASK (0x7 << 9) -#define MXC_CRMAP_AMLPMRA_MLPMA2_OFFSET 6 -#define MXC_CRMAP_AMLPMRA_MLPMA2_MASK (0x7 << 6) -#define MXC_CRMAP_AMLPMRA_MLPMA1_OFFSET 3 -#define MXC_CRMAP_AMLPMRA_MLPMA1_MASK (0x7 << 3) - -#define MXC_CRMAP_AMLPMRB_MLPMB0_OFFSET 0 -#define MXC_CRMAP_AMLPMRB_MLPMB0_MASK 0x7 - -#define MXC_CRMAP_AMLPMRC_MLPMC9_OFFSET 28 -#define MXC_CRMAP_AMLPMRC_MLPMC9_MASK (0x7 << 28) -#define MXC_CRMAP_AMLPMRC_MLPMC7_OFFSET 22 -#define MXC_CRMAP_AMLPMRC_MLPMC7_MASK (0x7 << 22) -#define MXC_CRMAP_AMLPMRC_MLPMC5_OFFSET 16 -#define MXC_CRMAP_AMLPMRC_MLPMC5_MASK (0x7 << 16) -#define MXC_CRMAP_AMLPMRC_MLPMC4_OFFSET 12 -#define MXC_CRMAP_AMLPMRC_MLPMC4_MASK (0x7 << 12) -#define MXC_CRMAP_AMLPMRC_MLPMC3_OFFSET 9 -#define MXC_CRMAP_AMLPMRC_MLPMC3_MASK (0x7 << 9) -#define MXC_CRMAP_AMLPMRC_MLPMC2_OFFSET 6 -#define MXC_CRMAP_AMLPMRC_MLPMC2_MASK (0x7 << 6) -#define MXC_CRMAP_AMLPMRC_MLPMC1_OFFSET 3 -#define MXC_CRMAP_AMLPMRC_MLPMC1_MASK (0x7 << 3) -#define MXC_CRMAP_AMLPMRC_MLPMC0_OFFSET 0 -#define MXC_CRMAP_AMLPMRC_MLPMC0_MASK 0x7 - -#define MXC_CRMAP_AMLPMRD_MLPMD7_OFFSET 22 -#define MXC_CRMAP_AMLPMRD_MLPMD7_MASK (0x7 << 22) -#define MXC_CRMAP_AMLPMRD_MLPMD4_OFFSET 12 -#define MXC_CRMAP_AMLPMRD_MLPMD4_MASK (0x7 << 12) -#define MXC_CRMAP_AMLPMRD_MLPMD3_OFFSET 9 -#define MXC_CRMAP_AMLPMRD_MLPMD3_MASK (0x7 << 9) -#define MXC_CRMAP_AMLPMRD_MLPMD2_OFFSET 6 -#define MXC_CRMAP_AMLPMRD_MLPMD2_MASK (0x7 << 6) -#define MXC_CRMAP_AMLPMRD_MLPMD0_OFFSET 0 -#define MXC_CRMAP_AMLPMRD_MLPMD0_MASK 0x7 - -#define MXC_CRMAP_AMLPMRE1_MLPME9_OFFSET 28 -#define MXC_CRMAP_AMLPMRE1_MLPME9_MASK (0x7 << 28) -#define MXC_CRMAP_AMLPMRE1_MLPME8_OFFSET 25 -#define MXC_CRMAP_AMLPMRE1_MLPME8_MASK (0x7 << 25) -#define MXC_CRMAP_AMLPMRE1_MLPME7_OFFSET 22 -#define MXC_CRMAP_AMLPMRE1_MLPME7_MASK (0x7 << 22) -#define MXC_CRMAP_AMLPMRE1_MLPME6_OFFSET 19 -#define MXC_CRMAP_AMLPMRE1_MLPME6_MASK (0x7 << 19) -#define MXC_CRMAP_AMLPMRE1_MLPME5_OFFSET 16 -#define MXC_CRMAP_AMLPMRE1_MLPME5_MASK (0x7 << 16) -#define MXC_CRMAP_AMLPMRE1_MLPME4_OFFSET 12 -#define MXC_CRMAP_AMLPMRE1_MLPME4_MASK (0x7 << 12) -#define MXC_CRMAP_AMLPMRE1_MLPME3_OFFSET 9 -#define MXC_CRMAP_AMLPMRE1_MLPME3_MASK (0x7 << 9) -#define MXC_CRMAP_AMLPMRE1_MLPME2_OFFSET 6 -#define MXC_CRMAP_AMLPMRE1_MLPME2_MASK (0x7 << 6) -#define MXC_CRMAP_AMLPMRE1_MLPME1_OFFSET 3 -#define MXC_CRMAP_AMLPMRE1_MLPME1_MASK (0x7 << 3) -#define MXC_CRMAP_AMLPMRE1_MLPME0_OFFSET 0 -#define MXC_CRMAP_AMLPMRE1_MLPME0_MASK 0x7 - -#define MXC_CRMAP_AMLPMRE2_MLPME0_OFFSET 0 -#define MXC_CRMAP_AMLPMRE2_MLPME0_MASK 0x7 - -#define MXC_CRMAP_AMLPMRF_MLPMF6_OFFSET 19 -#define MXC_CRMAP_AMLPMRF_MLPMF6_MASK (0x7 << 19) -#define MXC_CRMAP_AMLPMRF_MLPMF5_OFFSET 16 -#define MXC_CRMAP_AMLPMRF_MLPMF5_MASK (0x7 << 16) -#define MXC_CRMAP_AMLPMRF_MLPMF3_OFFSET 9 -#define MXC_CRMAP_AMLPMRF_MLPMF3_MASK (0x7 << 9) -#define MXC_CRMAP_AMLPMRF_MLPMF2_OFFSET 6 -#define MXC_CRMAP_AMLPMRF_MLPMF2_MASK (0x7 << 6) -#define MXC_CRMAP_AMLPMRF_MLPMF1_OFFSET 3 -#define MXC_CRMAP_AMLPMRF_MLPMF1_MASK (0x7 << 3) -#define MXC_CRMAP_AMLPMRF_MLPMF0_OFFSET 0 -#define MXC_CRMAP_AMLPMRF_MLPMF0_MASK (0x7 << 0) - -#define MXC_CRMAP_AMLPMRG_MLPMG9_OFFSET 28 -#define MXC_CRMAP_AMLPMRG_MLPMG9_MASK (0x7 << 28) -#define MXC_CRMAP_AMLPMRG_MLPMG7_OFFSET 22 -#define MXC_CRMAP_AMLPMRG_MLPMG7_MASK (0x7 << 22) -#define MXC_CRMAP_AMLPMRG_MLPMG6_OFFSET 19 -#define MXC_CRMAP_AMLPMRG_MLPMG6_MASK (0x7 << 19) -#define MXC_CRMAP_AMLPMRG_MLPMG5_OFFSET 16 -#define MXC_CRMAP_AMLPMRG_MLPMG5_MASK (0x7 << 16) -#define MXC_CRMAP_AMLPMRG_MLPMG4_OFFSET 12 -#define MXC_CRMAP_AMLPMRG_MLPMG4_MASK (0x7 << 12) -#define MXC_CRMAP_AMLPMRG_MLPMG3_OFFSET 9 -#define MXC_CRMAP_AMLPMRG_MLPMG3_MASK (0x7 << 9) -#define MXC_CRMAP_AMLPMRG_MLPMG2_OFFSET 6 -#define MXC_CRMAP_AMLPMRG_MLPMG2_MASK (0x7 << 6) -#define MXC_CRMAP_AMLPMRG_MLPMG1_OFFSET 3 -#define MXC_CRMAP_AMLPMRG_MLPMG1_MASK (0x7 << 3) -#define MXC_CRMAP_AMLPMRG_MLPMG0_OFFSET 0 -#define MXC_CRMAP_AMLPMRG_MLPMG0_MASK 0x7 - -#define MXC_CRMAP_AGPR_IPUPAD_OFFSET 20 -#define MXC_CRMAP_AGPR_IPUPAD_MASK (0x7 << 20) - -#define MXC_CRMAP_APRA_EL1TEN_OFFSET 29 -#define MXC_CRMAP_APRA_SIMEN_OFFSET 24 -#define MXC_CRMAP_APRA_UART3DIV_OFFSET 17 -#define MXC_CRMAP_APRA_UART3DIV_MASK (0xF << 17) -#define MXC_CRMAP_APRA_UART3EN_OFFSET 16 -#define MXC_CRMAP_APRA_SAHARA_DIV2_CLKEN_OFFSET 14 -#define MXC_CRMAP_APRA_MQSPIEN_OFFSET 13 -#define MXC_CRMAP_APRA_UART2EN_OFFSET 8 -#define MXC_CRMAP_APRA_UART1EN_OFFSET 0 - -#define MXC_CRMAP_APRB_SDHC2_ISEL_OFFSET 13 -#define MXC_CRMAP_APRB_SDHC2_ISEL_MASK (0x7 << 13) -#define MXC_CRMAP_APRB_SDHC2_DIV_OFFSET 9 -#define MXC_CRMAP_APRB_SDHC2_DIV_MASK (0xF << 9) -#define MXC_CRMAP_APRB_SDHC2EN_OFFSET 8 -#define MXC_CRMAP_APRB_SDHC1_ISEL_OFFSET 5 -#define MXC_CRMAP_APRB_SDHC1_ISEL_MASK (0x7 << 5) -#define MXC_CRMAP_APRB_SDHC1_DIV_OFFSET 1 -#define MXC_CRMAP_APRB_SDHC1_DIV_MASK (0xF << 1) -#define MXC_CRMAP_APRB_SDHC1EN_OFFSET 0 - -#define MXC_CRMAP_ACSR_ADS_OFFSET 8 -#define MXC_CRMAP_ACSR_ADS (0x1 << 8) -#define MXC_CRMAP_ACSR_ACS 0x1 - -#define MXC_CRMAP_ADCR_LFDF_0 (0x0 << 8) -#define MXC_CRMAP_ADCR_LFDF_2 (0x1 << 8) -#define MXC_CRMAP_ADCR_LFDF_4 (0x2 << 8) -#define MXC_CRMAP_ADCR_LFDF_8 (0x3 << 8) -#define MXC_CRMAP_ADCR_LFDF_OFFSET 8 -#define MXC_CRMAP_ADCR_LFDF_MASK (0x3 << 8) -#define MXC_CRMAP_ADCR_ALT_PLL 0x80 -#define MXC_CRMAP_ADCR_DFS_DIVEN 0x20 -#define MXC_CRMAP_ADCR_DIV_BYP 0x2 -#define MXC_CRMAP_ADCR_VSTAT 0x8 -#define MXC_CRMAP_ADCR_TSTAT 0x10 -#define MXC_CRMAP_ADCR_DVFS_VCTRL 0x10 -#define MXC_CRMAP_ADCR_CLK_ON 0x40 - -#define MXC_CRMAP_ADFMR_FC_OFFSET 16 -#define MXC_CRMAP_ADFMR_FC_MASK (0x1F << 16) -#define MXC_CRMAP_ADFMR_MF_OFFSET 1 -#define MXC_CRMAP_ADFMR_MF_MASK (0x3FF << 1) -#define MXC_CRMAP_ADFMR_DFM_CLK_READY 0x1 -#define MXC_CRMAP_ADFMR_DFM_PWR_DOWN 0x8000 - -#define MXC_CRMAP_ACR_CKOHS_HIGH (1 << 18) -#define MXC_CRMAP_ACR_CKOS_HIGH (1 << 16) -#define MXC_CRMAP_ACR_CKOHS_MASK (0x7 << 12) -#define MXC_CRMAP_ACR_CKOHD (1 << 11) -#define MXC_CRMAP_ACR_CKOHDIV_MASK (0xF << 8) -#define MXC_CRMAP_ACR_CKOHDIV_OFFSET 8 -#define MXC_CRMAP_ACR_CKOD (1 << 7) -#define MXC_CRMAP_ACR_CKOS_MASK (0x7 << 4) - -/* AP Warm reset */ -#define MXC_CRMAP_AMCR_SW_AP (1 << 14) - -/* Bit definitions of ACGCR in CRM_AP for tree level clock gating */ -#define MXC_CRMAP_ACGCR_ACG0_STOP_WAIT 0x00000001 -#define MXC_CRMAP_ACGCR_ACG0_STOP 0x00000003 -#define MXC_CRMAP_ACGCR_ACG0_RUN 0x00000007 -#define MXC_CRMAP_ACGCR_ACG0_DISABLED 0x00000000 - -#define MXC_CRMAP_ACGCR_ACG1_STOP_WAIT 0x00000008 -#define MXC_CRMAP_ACGCR_ACG1_STOP 0x00000018 -#define MXC_CRMAP_ACGCR_ACG1_RUN 0x00000038 -#define MXC_CRMAP_ACGCR_ACG1_DISABLED 0x00000000 - -#define MXC_CRMAP_ACGCR_ACG2_STOP_WAIT 0x00000040 -#define MXC_CRMAP_ACGCR_ACG2_STOP 0x000000C0 -#define MXC_CRMAP_ACGCR_ACG2_RUN 0x000001C0 -#define MXC_CRMAP_ACGCR_ACG2_DISABLED 0x00000000 - -#define MXC_CRMAP_ACGCR_ACG3_STOP_WAIT 0x00000200 -#define MXC_CRMAP_ACGCR_ACG3_STOP 0x00000600 -#define MXC_CRMAP_ACGCR_ACG3_RUN 0x00000E00 -#define MXC_CRMAP_ACGCR_ACG3_DISABLED 0x00000000 - -#define MXC_CRMAP_ACGCR_ACG4_STOP_WAIT 0x00001000 -#define MXC_CRMAP_ACGCR_ACG4_STOP 0x00003000 -#define MXC_CRMAP_ACGCR_ACG4_RUN 0x00007000 -#define MXC_CRMAP_ACGCR_ACG4_DISABLED 0x00000000 - -#define MXC_CRMAP_ACGCR_ACG5_STOP_WAIT 0x00010000 -#define MXC_CRMAP_ACGCR_ACG5_STOP 0x00030000 -#define MXC_CRMAP_ACGCR_ACG5_RUN 0x00070000 -#define MXC_CRMAP_ACGCR_ACG5_DISABLED 0x00000000 - -#define MXC_CRMAP_ACGCR_ACG6_STOP_WAIT 0x00080000 -#define MXC_CRMAP_ACGCR_ACG6_STOP 0x00180000 -#define MXC_CRMAP_ACGCR_ACG6_RUN 0x00380000 -#define MXC_CRMAP_ACGCR_ACG6_DISABLED 0x00000000 - -#define NUM_GATE_CTRL 6 - -/* CRM COM Register Offsets */ -#define MXC_CRMCOM_CSCR (MXC_CRM_COM_BASE + 0x0C) -#define MXC_CRMCOM_CCCR (MXC_CRM_COM_BASE + 0x10) - -/* CRM COM Bit Definitions */ -#define MXC_CRMCOM_CSCR_PPD1 0x08000000 -#define MXC_CRMCOM_CSCR_CKOHSEL (1 << 18) -#define MXC_CRMCOM_CSCR_CKOSEL (1 << 17) -#define MXC_CRMCOM_CCCR_CC_DIV_OFFSET 8 -#define MXC_CRMCOM_CCCR_CC_DIV_MASK (0x1F << 8) -#define MXC_CRMCOM_CCCR_CC_SEL_OFFSET 0 -#define MXC_CRMCOM_CCCR_CC_SEL_MASK 0x3 - -/* DSM Register Offsets */ -#define MXC_DSM_SLEEP_TIME (MXC_DSM_BASE + 0x0c) -#define MXC_DSM_CONTROL0 (MXC_DSM_BASE + 0x20) -#define MXC_DSM_CONTROL1 (MXC_DSM_BASE + 0x24) -#define MXC_DSM_CTREN (MXC_DSM_BASE + 0x28) -#define MXC_DSM_WARM_PER (MXC_DSM_BASE + 0x40) -#define MXC_DSM_LOCK_PER (MXC_DSM_BASE + 0x44) -#define MXC_DSM_MGPER (MXC_DSM_BASE + 0x4c) -#define MXC_DSM_CRM_CONTROL (MXC_DSM_BASE + 0x50) - -/* Bit definitions of various registers in DSM */ -#define MXC_DSM_CRM_CTRL_DVFS_BYP 0x00000008 -#define MXC_DSM_CRM_CTRL_DVFS_VCTRL 0x00000004 -#define MXC_DSM_CRM_CTRL_LPMD1 0x00000002 -#define MXC_DSM_CRM_CTRL_LPMD0 0x00000001 -#define MXC_DSM_CRM_CTRL_LPMD_STOP_MODE 0x00000000 -#define MXC_DSM_CRM_CTRL_LPMD_WAIT_MODE 0x00000001 -#define MXC_DSM_CRM_CTRL_LPMD_RUN_MODE 0x00000003 -#define MXC_DSM_CONTROL0_STBY_COMMIT_EN 0x00000200 -#define MXC_DSM_CONTROL0_MSTR_EN 0x00000001 -#define MXC_DSM_CONTROL0_RESTART 0x00000010 -/* Counter Block reset */ -#define MXC_DSM_CONTROL1_CB_RST 0x00000002 -/* State Machine reset */ -#define MXC_DSM_CONTROL1_SM_RST 0x00000004 -/* Bit needed to reset counter block */ -#define MXC_CONTROL1_RST_CNT32 0x00000008 -#define MXC_DSM_CONTROL1_RST_CNT32_EN 0x00000800 -#define MXC_DSM_CONTROL1_SLEEP 0x00000100 -#define MXC_DSM_CONTROL1_WAKEUP_DISABLE 0x00004000 -#define MXC_DSM_CTREN_CNT32 0x00000001 - -/* Magic Fix enable bit */ -#define MXC_DSM_MGPER_EN_MGFX 0x80000000 -#define MXC_DSM_MGPER_PER_MASK 0x000003FF -#define MXC_DSM_MGPER_PER(n) (MXC_DSM_MGPER_PER_MASK & n) - -/* Address offsets of the CLKCTL registers */ -#define MXC_CLKCTL_GP_CTRL (MXC_CLKCTL_BASE + 0x00) -#define MXC_CLKCTL_GP_SER (MXC_CLKCTL_BASE + 0x04) -#define MXC_CLKCTL_GP_CER (MXC_CLKCTL_BASE + 0x08) - -#endif /* _ARCH_ARM_MACH_MXC91231_CRM_REGS_H_ */ diff --git a/arch/arm/mach-mxc91231/devices.c b/arch/arm/mach-mxc91231/devices.c deleted file mode 100644 index 027af4f..0000000 --- a/arch/arm/mach-mxc91231/devices.c +++ /dev/null @@ -1,251 +0,0 @@ -/* - * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Sascha Hauer, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/serial.h> -#include <linux/gpio.h> -#include <mach/hardware.h> -#include <mach/irqs.h> -#include <mach/imx-uart.h> - -static struct resource uart0[] = { - { - .start = MXC91231_UART1_BASE_ADDR, - .end = MXC91231_UART1_BASE_ADDR + 0x0B5, - .flags = IORESOURCE_MEM, - }, { - .start = MXC91231_INT_UART1_RX, - .end = MXC91231_INT_UART1_RX, - .flags = IORESOURCE_IRQ, - }, { - .start = MXC91231_INT_UART1_TX, - .end = MXC91231_INT_UART1_TX, - .flags = IORESOURCE_IRQ, - }, { - .start = MXC91231_INT_UART1_MINT, - .end = MXC91231_INT_UART1_MINT, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_uart_device0 = { - .name = "imx-uart", - .id = 0, - .resource = uart0, - .num_resources = ARRAY_SIZE(uart0), -}; - -static struct resource uart1[] = { - { - .start = MXC91231_UART2_BASE_ADDR, - .end = MXC91231_UART2_BASE_ADDR + 0x0B5, - .flags = IORESOURCE_MEM, - }, { - .start = MXC91231_INT_UART2_RX, - .end = MXC91231_INT_UART2_RX, - .flags = IORESOURCE_IRQ, - }, { - .start = MXC91231_INT_UART2_TX, - .end = MXC91231_INT_UART2_TX, - .flags = IORESOURCE_IRQ, - }, { - .start = MXC91231_INT_UART2_MINT, - .end = MXC91231_INT_UART2_MINT, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_uart_device1 = { - .name = "imx-uart", - .id = 1, - .resource = uart1, - .num_resources = ARRAY_SIZE(uart1), -}; - -static struct resource uart2[] = { - { - .start = MXC91231_UART3_BASE_ADDR, - .end = MXC91231_UART3_BASE_ADDR + 0x0B5, - .flags = IORESOURCE_MEM, - }, { - .start = MXC91231_INT_UART3_RX, - .end = MXC91231_INT_UART3_RX, - .flags = IORESOURCE_IRQ, - }, { - .start = MXC91231_INT_UART3_TX, - .end = MXC91231_INT_UART3_TX, - .flags = IORESOURCE_IRQ, - }, { - .start = MXC91231_INT_UART3_MINT, - .end = MXC91231_INT_UART3_MINT, - .flags = IORESOURCE_IRQ, - - }, -}; - -struct platform_device mxc_uart_device2 = { - .name = "imx-uart", - .id = 2, - .resource = uart2, - .num_resources = ARRAY_SIZE(uart2), -}; - -/* GPIO port description */ -static struct mxc_gpio_port mxc_gpio_ports[] = { - [0] = { - .chip.label = "gpio-0", - .base = MXC91231_IO_ADDRESS(MXC91231_GPIO1_AP_BASE_ADDR), - .irq = MXC91231_INT_GPIO1, - .virtual_irq_start = MXC_GPIO_IRQ_START, - }, - [1] = { - .chip.label = "gpio-1", - .base = MXC91231_IO_ADDRESS(MXC91231_GPIO2_AP_BASE_ADDR), - .irq = MXC91231_INT_GPIO2, - .virtual_irq_start = MXC_GPIO_IRQ_START + 32, - }, - [2] = { - .chip.label = "gpio-2", - .base = MXC91231_IO_ADDRESS(MXC91231_GPIO3_AP_BASE_ADDR), - .irq = MXC91231_INT_GPIO3, - .virtual_irq_start = MXC_GPIO_IRQ_START + 64, - }, - [3] = { - .chip.label = "gpio-3", - .base = MXC91231_IO_ADDRESS(MXC91231_GPIO4_SH_BASE_ADDR), - .irq = MXC91231_INT_GPIO4, - .virtual_irq_start = MXC_GPIO_IRQ_START + 96, - }, -}; - -int __init mxc91231_register_gpios(void) -{ - return mxc_gpio_init(mxc_gpio_ports, ARRAY_SIZE(mxc_gpio_ports)); -} - -static struct resource mxc_nand_resources[] = { - { - .start = MXC91231_NFC_BASE_ADDR, - .end = MXC91231_NFC_BASE_ADDR + 0xfff, - .flags = IORESOURCE_MEM - }, { - .start = MXC91231_INT_NANDFC, - .end = MXC91231_INT_NANDFC, - .flags = IORESOURCE_IRQ - }, -}; - -struct platform_device mxc_nand_device = { - .name = "mxc_nand", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_nand_resources), - .resource = mxc_nand_resources, -}; - -static struct resource mxc_sdhc0_resources[] = { - { - .start = MXC91231_MMC_SDHC1_BASE_ADDR, - .end = MXC91231_MMC_SDHC1_BASE_ADDR + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = MXC91231_INT_MMC_SDHC1, - .end = MXC91231_INT_MMC_SDHC1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource mxc_sdhc1_resources[] = { - { - .start = MXC91231_MMC_SDHC2_BASE_ADDR, - .end = MXC91231_MMC_SDHC2_BASE_ADDR + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = MXC91231_INT_MMC_SDHC2, - .end = MXC91231_INT_MMC_SDHC2, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_sdhc_device0 = { - .name = "mxc-mmc", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_sdhc0_resources), - .resource = mxc_sdhc0_resources, -}; - -struct platform_device mxc_sdhc_device1 = { - .name = "mxc-mmc", - .id = 1, - .num_resources = ARRAY_SIZE(mxc_sdhc1_resources), - .resource = mxc_sdhc1_resources, -}; - -static struct resource mxc_cspi0_resources[] = { - { - .start = MXC91231_CSPI1_BASE_ADDR, - .end = MXC91231_CSPI1_BASE_ADDR + 0x20, - .flags = IORESOURCE_MEM, - }, { - .start = MXC91231_INT_CSPI1, - .end = MXC91231_INT_CSPI1, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_cspi_device0 = { - .name = "spi_imx", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_cspi0_resources), - .resource = mxc_cspi0_resources, -}; - -static struct resource mxc_cspi1_resources[] = { - { - .start = MXC91231_CSPI2_BASE_ADDR, - .end = MXC91231_CSPI2_BASE_ADDR + 0x20, - .flags = IORESOURCE_MEM, - }, { - .start = MXC91231_INT_CSPI2, - .end = MXC91231_INT_CSPI2, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_cspi_device1 = { - .name = "spi_imx", - .id = 1, - .num_resources = ARRAY_SIZE(mxc_cspi1_resources), - .resource = mxc_cspi1_resources, -}; - -static struct resource mxc_wdog0_resources[] = { - { - .start = MXC91231_WDOG1_BASE_ADDR, - .end = MXC91231_WDOG1_BASE_ADDR + 0x10, - .flags = IORESOURCE_MEM, - }, -}; - -struct platform_device mxc_wdog_device0 = { - .name = "mxc-wdt", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_wdog0_resources), - .resource = mxc_wdog0_resources, -}; diff --git a/arch/arm/mach-mxc91231/devices.h b/arch/arm/mach-mxc91231/devices.h deleted file mode 100644 index 72a2136..0000000 --- a/arch/arm/mach-mxc91231/devices.h +++ /dev/null @@ -1,13 +0,0 @@ -extern struct platform_device mxc_uart_device0; -extern struct platform_device mxc_uart_device1; -extern struct platform_device mxc_uart_device2; - -extern struct platform_device mxc_nand_device; - -extern struct platform_device mxc_sdhc_device0; -extern struct platform_device mxc_sdhc_device1; - -extern struct platform_device mxc_cspi_device0; -extern struct platform_device mxc_cspi_device1; - -extern struct platform_device mxc_wdog_device0; diff --git a/arch/arm/mach-mxc91231/iomux.c b/arch/arm/mach-mxc91231/iomux.c deleted file mode 100644 index 66fc41c..0000000 --- a/arch/arm/mach-mxc91231/iomux.c +++ /dev/null @@ -1,177 +0,0 @@ -/* - * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> - * Copyright (C) 2009 by Valentin Longchamp <valentin.longchamp@epfl.ch> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include <linux/module.h> -#include <linux/spinlock.h> -#include <linux/io.h> -#include <linux/kernel.h> -#include <mach/hardware.h> -#include <mach/gpio.h> -#include <mach/iomux-mxc91231.h> - -/* - * IOMUX register (base) addresses - */ -#define IOMUX_AP_BASE MXC91231_IO_ADDRESS(MXC91231_IOMUX_AP_BASE_ADDR) -#define IOMUX_COM_BASE MXC91231_IO_ADDRESS(MXC91231_IOMUX_COM_BASE_ADDR) -#define IOMUXSW_AP_MUX_CTL (IOMUX_AP_BASE + 0x000) -#define IOMUXSW_SP_MUX_CTL (IOMUX_COM_BASE + 0x000) -#define IOMUXSW_PAD_CTL (IOMUX_COM_BASE + 0x200) - -#define IOMUXINT_OBS1 (IOMUX_AP_BASE + 0x600) -#define IOMUXINT_OBS2 (IOMUX_AP_BASE + 0x004) - -static DEFINE_SPINLOCK(gpio_mux_lock); - -#define NB_PORTS ((PIN_MAX + 32) / 32) -#define PIN_GLOBAL_NUM(pin) \ - (((pin & MUX_SIDE_MASK) >> MUX_SIDE_SHIFT)*PIN_AP_MAX + \ - ((pin & MUX_REG_MASK) >> MUX_REG_SHIFT)*4 + \ - ((pin & MUX_FIELD_MASK) >> MUX_FIELD_SHIFT)) - -unsigned long mxc_pin_alloc_map[NB_PORTS * 32 / BITS_PER_LONG]; -/* - * set the mode for a IOMUX pin. - */ -int mxc_iomux_mode(unsigned int pin_mode) -{ - u32 side, field, l, mode, ret = 0; - void __iomem *reg; - - side = (pin_mode & MUX_SIDE_MASK) >> MUX_SIDE_SHIFT; - switch (side) { - case MUX_SIDE_AP: - reg = IOMUXSW_AP_MUX_CTL; - break; - case MUX_SIDE_SP: - reg = IOMUXSW_SP_MUX_CTL; - break; - default: - return -EINVAL; - } - reg += ((pin_mode & MUX_REG_MASK) >> MUX_REG_SHIFT) * 4; - field = (pin_mode & MUX_FIELD_MASK) >> MUX_FIELD_SHIFT; - mode = (pin_mode & MUX_MODE_MASK) >> MUX_MODE_SHIFT; - - spin_lock(&gpio_mux_lock); - - l = __raw_readl(reg); - l &= ~(0xff << (field * 8)); - l |= mode << (field * 8); - __raw_writel(l, reg); - - spin_unlock(&gpio_mux_lock); - - return ret; -} -EXPORT_SYMBOL(mxc_iomux_mode); - -/* - * This function configures the pad value for a IOMUX pin. - */ -void mxc_iomux_set_pad(enum iomux_pins pin, u32 config) -{ - u32 padgrp, field, l; - void __iomem *reg; - - padgrp = (pin & MUX_PADGRP_MASK) >> MUX_PADGRP_SHIFT; - reg = IOMUXSW_PAD_CTL + (pin + 2) / 3 * 4; - field = (pin + 2) % 3; - - pr_debug("%s: reg offset = 0x%x, field = %d\n", - __func__, (pin + 2) / 3, field); - - spin_lock(&gpio_mux_lock); - - l = __raw_readl(reg); - l &= ~(0x1ff << (field * 10)); - l |= config << (field * 10); - __raw_writel(l, reg); - - spin_unlock(&gpio_mux_lock); -} -EXPORT_SYMBOL(mxc_iomux_set_pad); - -/* - * allocs a single pin: - * - reserves the pin so that it is not claimed by another driver - * - setups the iomux according to the configuration - */ -int mxc_iomux_alloc_pin(unsigned int pin_mode, const char *label) -{ - unsigned pad = PIN_GLOBAL_NUM(pin_mode); - if (pad >= (PIN_MAX + 1)) { - printk(KERN_ERR "mxc_iomux: Attempt to request nonexistant pin %u for \"%s\"\n", - pad, label ? label : "?"); - return -EINVAL; - } - - if (test_and_set_bit(pad, mxc_pin_alloc_map)) { - printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n", - pad, label ? label : "?"); - return -EBUSY; - } - mxc_iomux_mode(pin_mode); - - return 0; -} -EXPORT_SYMBOL(mxc_iomux_alloc_pin); - -int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count, - const char *label) -{ - const unsigned int *p = pin_list; - int i; - int ret = -EINVAL; - - for (i = 0; i < count; i++) { - ret = mxc_iomux_alloc_pin(*p, label); - if (ret) - goto setup_error; - p++; - } - return 0; - -setup_error: - mxc_iomux_release_multiple_pins(pin_list, i); - return ret; -} -EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins); - -void mxc_iomux_release_pin(unsigned int pin_mode) -{ - unsigned pad = PIN_GLOBAL_NUM(pin_mode); - - if (pad < (PIN_MAX + 1)) - clear_bit(pad, mxc_pin_alloc_map); -} -EXPORT_SYMBOL(mxc_iomux_release_pin); - -void mxc_iomux_release_multiple_pins(const unsigned int *pin_list, int count) -{ - const unsigned int *p = pin_list; - int i; - - for (i = 0; i < count; i++) { - mxc_iomux_release_pin(*p); - p++; - } -} -EXPORT_SYMBOL(mxc_iomux_release_multiple_pins); diff --git a/arch/arm/mach-mxc91231/magx-zn5.c b/arch/arm/mach-mxc91231/magx-zn5.c deleted file mode 100644 index f31a45e..0000000 --- a/arch/arm/mach-mxc91231/magx-zn5.c +++ /dev/null @@ -1,62 +0,0 @@ -/* - * Copyright 2009 Dmitriy Taychenachev <dimichxp@gmail.com> - * - * This file is released under the GPLv2 or later. - */ - -#include <linux/irq.h> -#include <linux/init.h> -#include <linux/device.h> - -#include <asm/mach-types.h> -#include <asm/mach/time.h> -#include <asm/mach/arch.h> - -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-mxc91231.h> -#include <mach/mmc.h> -#include <mach/imx-uart.h> - -#include "devices.h" - -static struct imxuart_platform_data uart_pdata = { -}; - -static struct imxmmc_platform_data sdhc_pdata = { -}; - -static void __init zn5_init(void) -{ - pm_power_off = mxc91231_power_off; - - mxc_iomux_alloc_pin(MXC91231_PIN_SP_USB_DAT_VP__RXD2, "uart2-rx"); - mxc_iomux_alloc_pin(MXC91231_PIN_SP_USB_SE0_VM__TXD2, "uart2-tx"); - - mxc_register_device(&mxc_uart_device1, &uart_pdata); - mxc_register_device(&mxc_uart_device0, &uart_pdata); - - mxc_register_device(&mxc_sdhc_device0, &sdhc_pdata); - - mxc_register_device(&mxc_wdog_device0, NULL); - - return; -} - -static void __init zn5_timer_init(void) -{ - mxc91231_clocks_init(26000000); /* 26mhz ckih */ -} - -struct sys_timer zn5_timer = { - .init = zn5_timer_init, -}; - -MACHINE_START(MAGX_ZN5, "Motorola Zn5") - .boot_params = MXC91231_PHYS_OFFSET + 0x100, - .map_io = mxc91231_map_io, - .init_early = mxc91231_init_early, - .init_irq = mxc91231_init_irq, - .timer = &zn5_timer, - .init_machine = zn5_init, -MACHINE_END diff --git a/arch/arm/mach-mxc91231/mm.c b/arch/arm/mach-mxc91231/mm.c deleted file mode 100644 index a77f6da..0000000 --- a/arch/arm/mach-mxc91231/mm.c +++ /dev/null @@ -1,62 +0,0 @@ -/* - * Copyright (C) 1999,2000 Arm Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * Copyright 2004-2005 Freescale Semiconductor, Inc. All Rights Reserved. - * - add MXC specific definitions - * Copyright 2006 Motorola, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/mm.h> -#include <linux/init.h> -#include <mach/hardware.h> -#include <mach/common.h> -#include <asm/pgtable.h> -#include <asm/mach/map.h> - -/* - * This structure defines the MXC memory map. - */ -static struct map_desc mxc91231_io_desc[] __initdata = { - imx_map_entry(MXC91231, L2CC, MT_DEVICE), - imx_map_entry(MXC91231, X_MEMC, MT_DEVICE), - imx_map_entry(MXC91231, ROMP, MT_DEVICE), - imx_map_entry(MXC91231, AVIC, MT_DEVICE), - imx_map_entry(MXC91231, AIPS1, MT_DEVICE), - imx_map_entry(MXC91231, SPBA0, MT_DEVICE), - imx_map_entry(MXC91231, SPBA1, MT_DEVICE), - imx_map_entry(MXC91231, AIPS2, MT_DEVICE), -}; - -/* - * This function initializes the memory map. It is called during the - * system startup to create static physical to virtual memory map for - * the IO modules. - */ -void __init mxc91231_map_io(void) -{ - iotable_init(mxc91231_io_desc, ARRAY_SIZE(mxc91231_io_desc)); -} - -void __init mxc91231_init_early(void) -{ - mxc_set_cpu_type(MXC_CPU_MXC91231); -} - -int mxc91231_register_gpios(void); - -void __init mxc91231_init_irq(void) -{ - mxc91231_register_gpios(); - mxc_init_irq(MXC91231_IO_ADDRESS(MXC91231_AVIC_BASE_ADDR)); -} diff --git a/arch/arm/mach-mxc91231/system.c b/arch/arm/mach-mxc91231/system.c deleted file mode 100644 index 736f7ef..0000000 --- a/arch/arm/mach-mxc91231/system.c +++ /dev/null @@ -1,51 +0,0 @@ -/* - * Copyright 2009 Dmitriy Taychenachev <dimichxp@gmail.com> - * - * This file is released under the GPLv2 or later. - */ - -#include <linux/delay.h> -#include <linux/io.h> - -#include <asm/proc-fns.h> -#include <mach/hardware.h> - -#include "crm_regs.h" - -#define WDOG_WCR MXC91231_IO_ADDRESS(MXC91231_WDOG1_BASE_ADDR) -#define WDOG_WCR_OUT_ENABLE (1 << 6) -#define WDOG_WCR_ASSERT (1 << 5) - -void mxc91231_power_off(void) -{ - u16 wcr; - - wcr = __raw_readw(WDOG_WCR); - wcr |= WDOG_WCR_OUT_ENABLE; - wcr &= ~WDOG_WCR_ASSERT; - __raw_writew(wcr, WDOG_WCR); -} - -void mxc91231_arch_reset(char mode, const char *cmd) -{ - u32 amcr; - - /* Reset the AP using CRM */ - amcr = __raw_readl(MXC_CRMAP_AMCR); - amcr &= ~MXC_CRMAP_AMCR_SW_AP; - __raw_writel(amcr, MXC_CRMAP_AMCR); - - mdelay(10); - cpu_reset(0); -} - -void mxc91231_prepare_idle(void) -{ - u32 crm_ctl; - - /* Go to WAIT mode after WFI */ - crm_ctl = __raw_readl(MXC_DSM_CRM_CONTROL); - crm_ctl &= ~(MXC_DSM_CRM_CTRL_LPMD0 | MXC_DSM_CRM_CTRL_LPMD1); - crm_ctl |= MXC_DSM_CRM_CTRL_LPMD_WAIT_MODE; - __raw_writel(crm_ctl, MXC_DSM_CRM_CONTROL); -} diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index edacefa..f114960 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -34,7 +34,6 @@ config MACH_MX23EVK select MXS_HAVE_PLATFORM_AUART select MXS_HAVE_PLATFORM_MXS_MMC select MXS_HAVE_PLATFORM_MXSFB - default y help Include support for MX23EVK platform. This includes specific configurations for the board and its peripherals. @@ -49,7 +48,6 @@ config MACH_MX28EVK select MXS_HAVE_PLATFORM_MXS_MMC select MXS_HAVE_PLATFORM_MXSFB select MXS_OCOTP - default y help Include support for MX28EVK platform. This includes specific configurations for the board and its peripherals. diff --git a/arch/arm/mach-mxs/clock-mx23.c b/arch/arm/mach-mxs/clock-mx23.c index c3577ea..0163b6d 100644 --- a/arch/arm/mach-mxs/clock-mx23.c +++ b/arch/arm/mach-mxs/clock-mx23.c @@ -446,6 +446,8 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("rtc", NULL, rtc_clk) _REGISTER_CLOCK("mxs-dma-apbh", NULL, hbus_clk) _REGISTER_CLOCK("mxs-dma-apbx", NULL, xbus_clk) + _REGISTER_CLOCK("mxs-mmc.0", NULL, ssp_clk) + _REGISTER_CLOCK("mxs-mmc.1", NULL, ssp_clk) _REGISTER_CLOCK(NULL, "usb", usb_clk) _REGISTER_CLOCK(NULL, "audio", audio_clk) _REGISTER_CLOCK("mxs-pwm.0", NULL, pwm_clk) diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h index c473edd..79b9452 100644 --- a/arch/arm/mach-mxs/devices-mx28.h +++ b/arch/arm/mach-mxs/devices-mx28.h @@ -34,7 +34,7 @@ extern const struct mxs_flexcan_data mx28_flexcan_data[] __initconst; #define mx28_add_flexcan0(pdata) mx28_add_flexcan(0, pdata) #define mx28_add_flexcan1(pdata) mx28_add_flexcan(1, pdata) -extern const struct mxs_i2c_data mx28_mxs_i2c_data[] __initconst; +extern const struct mxs_mxs_i2c_data mx28_mxs_i2c_data[] __initconst; #define mx28_add_mxs_i2c(id) mxs_add_mxs_i2c(&mx28_mxs_i2c_data[id]) extern const struct mxs_mxs_mmc_data mx28_mxs_mmc_data[] __initconst; diff --git a/arch/arm/mach-mxs/devices/platform-mxs-i2c.c b/arch/arm/mach-mxs/devices/platform-mxs-i2c.c index eab3a06..79222ec 100644 --- a/arch/arm/mach-mxs/devices/platform-mxs-i2c.c +++ b/arch/arm/mach-mxs/devices/platform-mxs-i2c.c @@ -22,13 +22,14 @@ [_id] = mxs_i2c_data_entry_single(soc, _id) #ifdef CONFIG_SOC_IMX28 -const struct mxs_i2c_data mx28_mxs_i2c_data[] __initconst = { +const struct mxs_mxs_i2c_data mx28_mxs_i2c_data[] __initconst = { mxs_i2c_data_entry(MX28, 0), mxs_i2c_data_entry(MX28, 1), }; #endif -struct platform_device *__init mxs_add_mxs_i2c(const struct mxs_i2c_data *data) +struct platform_device *__init mxs_add_mxs_i2c( + const struct mxs_mxs_i2c_data *data) { struct resource res[] = { { diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h index c5137f1..7a37469 100644 --- a/arch/arm/mach-mxs/include/mach/devices-common.h +++ b/arch/arm/mach-mxs/include/mach/devices-common.h @@ -65,13 +65,14 @@ struct platform_device *__init mxs_add_flexcan( const struct flexcan_platform_data *pdata); /* i2c */ -struct mxs_i2c_data { +struct mxs_mxs_i2c_data { int id; resource_size_t iobase; resource_size_t errirq; resource_size_t dmairq; }; -struct platform_device * __init mxs_add_mxs_i2c(const struct mxs_i2c_data *data); +struct platform_device * __init mxs_add_mxs_i2c( + const struct mxs_mxs_i2c_data *data); /* mmc */ #include <mach/mmc.h> diff --git a/arch/arm/mach-mxs/include/mach/mx23.h b/arch/arm/mach-mxs/include/mach/mx23.h index c0a18c2..599094b 100644 --- a/arch/arm/mach-mxs/include/mach/mx23.h +++ b/arch/arm/mach-mxs/include/mach/mx23.h @@ -57,7 +57,7 @@ #define MX23_AUDIOIN_BASE_ADDR (MX23_IO_BASE_ADDR + 0x04c000) #define MX23_LRADC_BASE_ADDR (MX23_IO_BASE_ADDR + 0x050000) #define MX23_SPDIF_BASE_ADDR (MX23_IO_BASE_ADDR + 0x054000) -#define MX23_I2C0_BASE_ADDR (MX23_IO_BASE_ADDR + 0x058000) +#define MX23_I2C_BASE_ADDR (MX23_IO_BASE_ADDR + 0x058000) #define MX23_RTC_BASE_ADDR (MX23_IO_BASE_ADDR + 0x05c000) #define MX23_PWM_BASE_ADDR (MX23_IO_BASE_ADDR + 0x064000) #define MX23_TIMROT_BASE_ADDR (MX23_IO_BASE_ADDR + 0x068000) diff --git a/arch/arm/mach-mxs/include/mach/uncompress.h b/arch/arm/mach-mxs/include/mach/uncompress.h index f12a173..7f8bf65 100644 --- a/arch/arm/mach-mxs/include/mach/uncompress.h +++ b/arch/arm/mach-mxs/include/mach/uncompress.h @@ -20,7 +20,7 @@ #include <asm/mach-types.h> -static unsigned long mxs_duart_base; +unsigned long mxs_duart_base; #define MXS_DUART(x) (*(volatile unsigned long *)(mxs_duart_base + (x))) diff --git a/arch/arm/mach-mxs/mach-mx23evk.c b/arch/arm/mach-mxs/mach-mx23evk.c index 214e5b6..3c2de33 100644 --- a/arch/arm/mach-mxs/mach-mx23evk.c +++ b/arch/arm/mach-mxs/mach-mx23evk.c @@ -148,7 +148,7 @@ static void __init mx23evk_init(void) mx23_add_auart0(); /* power on mmc slot by writing 0 to the gpio */ - ret = gpio_request_one(MX23EVK_MMC0_SLOT_POWER, GPIOF_DIR_OUT, + ret = gpio_request_one(MX23EVK_MMC0_SLOT_POWER, GPIOF_OUT_INIT_LOW, "mmc0-slot-power"); if (ret) pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret); diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c index bb329b9..eacdc6b 100644 --- a/arch/arm/mach-mxs/mach-mx28evk.c +++ b/arch/arm/mach-mxs/mach-mx28evk.c @@ -375,13 +375,13 @@ static void __init mx28evk_init(void) mx28_add_mxsfb(&mx28evk_mxsfb_pdata); /* power on mmc slot by writing 0 to the gpio */ - ret = gpio_request_one(MX28EVK_MMC0_SLOT_POWER, GPIOF_DIR_OUT, + ret = gpio_request_one(MX28EVK_MMC0_SLOT_POWER, GPIOF_OUT_INIT_LOW, "mmc0-slot-power"); if (ret) pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret); mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]); - ret = gpio_request_one(MX28EVK_MMC1_SLOT_POWER, GPIOF_DIR_OUT, + ret = gpio_request_one(MX28EVK_MMC1_SLOT_POWER, GPIOF_OUT_INIT_LOW, "mmc1-slot-power"); if (ret) pr_warn("failed to request gpio mmc1-slot-power: %d\n", ret); diff --git a/arch/arm/mach-nuc93x/include/mach/uncompress.h b/arch/arm/mach-nuc93x/include/mach/uncompress.h index 73082cd..381cb9b 100644 --- a/arch/arm/mach-nuc93x/include/mach/uncompress.h +++ b/arch/arm/mach-nuc93x/include/mach/uncompress.h @@ -27,7 +27,7 @@ #define arch_decomp_wdog() #define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE) -static u32 * uart_base = (u32 *)UART0_PA; +static u32 * const uart_base = (u32 *)UART0_PA; static void putc(int ch) { diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 237e453..3af2b7a 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -73,83 +73,18 @@ static u32 intc_bank_read_reg(struct omap_irq_bank *bank, u16 reg) return __raw_readl(bank->base_reg + reg); } -static int previous_irq; - -/* - * On 34xx we can get occasional spurious interrupts if the ack from - * an interrupt handler does not get posted before we unmask. Warn about - * the interrupt handlers that need to flush posted writes. - */ -static int omap_check_spurious(unsigned int irq) -{ - u32 sir, spurious; - - sir = intc_bank_read_reg(&irq_banks[0], INTC_SIR); - spurious = sir >> 7; - - if (spurious) { - printk(KERN_WARNING "Spurious irq %i: 0x%08x, please flush " - "posted write for irq %i\n", - irq, sir, previous_irq); - return spurious; - } - - return 0; -} - /* XXX: FIQ and additional INTC support (only MPU at the moment) */ static void omap_ack_irq(struct irq_data *d) { intc_bank_write_reg(0x1, &irq_banks[0], INTC_CONTROL); } -static void omap_mask_irq(struct irq_data *d) -{ - unsigned int irq = d->irq; - int offset = irq & (~(IRQ_BITS_PER_REG - 1)); - - if (cpu_is_omap34xx() && !cpu_is_ti816x()) { - int spurious = 0; - - /* - * INT_34XX_GPT12_IRQ is also the spurious irq. Maybe because - * it is the highest irq number? - */ - if (irq == INT_34XX_GPT12_IRQ) - spurious = omap_check_spurious(irq); - - if (!spurious) - previous_irq = irq; - } - - irq &= (IRQ_BITS_PER_REG - 1); - - intc_bank_write_reg(1 << irq, &irq_banks[0], INTC_MIR_SET0 + offset); -} - -static void omap_unmask_irq(struct irq_data *d) -{ - unsigned int irq = d->irq; - int offset = irq & (~(IRQ_BITS_PER_REG - 1)); - - irq &= (IRQ_BITS_PER_REG - 1); - - intc_bank_write_reg(1 << irq, &irq_banks[0], INTC_MIR_CLEAR0 + offset); -} - static void omap_mask_ack_irq(struct irq_data *d) { - omap_mask_irq(d); + irq_gc_mask_disable_reg(d); omap_ack_irq(d); } -static struct irq_chip omap_irq_chip = { - .name = "INTC", - .irq_ack = omap_mask_ack_irq, - .irq_mask = omap_mask_irq, - .irq_unmask = omap_unmask_irq, -}; - static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank) { unsigned long tmp; @@ -186,11 +121,31 @@ int omap_irq_pending(void) return 0; } +static __init void +omap_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num) +{ + struct irq_chip_generic *gc; + struct irq_chip_type *ct; + + gc = irq_alloc_generic_chip("INTC", 1, irq_start, base, + handle_level_irq); + ct = gc->chip_types; + ct->chip.irq_ack = omap_mask_ack_irq; + ct->chip.irq_mask = irq_gc_mask_disable_reg; + ct->chip.irq_unmask = irq_gc_unmask_enable_reg; + + ct->regs.ack = INTC_CONTROL; + ct->regs.enable = INTC_MIR_CLEAR0; + ct->regs.disable = INTC_MIR_SET0; + irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE, + IRQ_NOREQUEST | IRQ_NOPROBE, 0); +} + void __init omap_init_irq(void) { unsigned long nr_of_irqs = 0; unsigned int nr_banks = 0; - int i; + int i, j; for (i = 0; i < ARRAY_SIZE(irq_banks); i++) { unsigned long base = 0; @@ -215,17 +170,15 @@ void __init omap_init_irq(void) omap_irq_bank_init_one(bank); + for (i = 0, j = 0; i < bank->nr_irqs; i += 32, j += 0x20) + omap_alloc_gc(bank->base_reg + j, i, 32); + nr_of_irqs += bank->nr_irqs; nr_banks++; } printk(KERN_INFO "Total of %ld interrupts on %d active controller%s\n", nr_of_irqs, nr_banks, nr_banks > 1 ? "s" : ""); - - for (i = 0; i < nr_of_irqs; i++) { - irq_set_chip_and_handler(i, &omap_irq_chip, handle_level_irq); - set_irq_flags(i, IRQF_VALID); - } } #ifdef CONFIG_ARCH_OMAP3 diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 986c3bf..0ab531d 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -13,12 +13,11 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> +#include <linux/dma-mapping.h> #include <linux/serial_8250.h> #include <linux/mbus.h> -#include <linux/mv643xx_eth.h> #include <linux/mv643xx_i2c.h> #include <linux/ata_platform.h> -#include <linux/spi/orion_spi.h> #include <net/dsa.h> #include <asm/page.h> #include <asm/setup.h> @@ -29,11 +28,9 @@ #include <mach/bridge-regs.h> #include <mach/hardware.h> #include <mach/orion5x.h> -#include <plat/ehci-orion.h> -#include <plat/mv_xor.h> #include <plat/orion_nand.h> -#include <plat/orion_wdt.h> #include <plat/time.h> +#include <plat/common.h> #include "common.h" /***************************************************************************** @@ -70,530 +67,124 @@ void __init orion5x_map_io(void) /***************************************************************************** - * EHCI - ****************************************************************************/ -static struct orion_ehci_data orion5x_ehci_data = { - .dram = &orion5x_mbus_dram_info, - .phy_version = EHCI_PHY_ORION, -}; - -static u64 ehci_dmamask = 0xffffffffUL; - - -/***************************************************************************** * EHCI0 ****************************************************************************/ -static struct resource orion5x_ehci0_resources[] = { - { - .start = ORION5X_USB0_PHYS_BASE, - .end = ORION5X_USB0_PHYS_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_ORION5X_USB0_CTRL, - .end = IRQ_ORION5X_USB0_CTRL, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device orion5x_ehci0 = { - .name = "orion-ehci", - .id = 0, - .dev = { - .dma_mask = &ehci_dmamask, - .coherent_dma_mask = 0xffffffff, - .platform_data = &orion5x_ehci_data, - }, - .resource = orion5x_ehci0_resources, - .num_resources = ARRAY_SIZE(orion5x_ehci0_resources), -}; - void __init orion5x_ehci0_init(void) { - platform_device_register(&orion5x_ehci0); + orion_ehci_init(&orion5x_mbus_dram_info, + ORION5X_USB0_PHYS_BASE, IRQ_ORION5X_USB0_CTRL); } /***************************************************************************** * EHCI1 ****************************************************************************/ -static struct resource orion5x_ehci1_resources[] = { - { - .start = ORION5X_USB1_PHYS_BASE, - .end = ORION5X_USB1_PHYS_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_ORION5X_USB1_CTRL, - .end = IRQ_ORION5X_USB1_CTRL, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device orion5x_ehci1 = { - .name = "orion-ehci", - .id = 1, - .dev = { - .dma_mask = &ehci_dmamask, - .coherent_dma_mask = 0xffffffff, - .platform_data = &orion5x_ehci_data, - }, - .resource = orion5x_ehci1_resources, - .num_resources = ARRAY_SIZE(orion5x_ehci1_resources), -}; - void __init orion5x_ehci1_init(void) { - platform_device_register(&orion5x_ehci1); + orion_ehci_1_init(&orion5x_mbus_dram_info, + ORION5X_USB1_PHYS_BASE, IRQ_ORION5X_USB1_CTRL); } /***************************************************************************** - * GigE + * GE00 ****************************************************************************/ -struct mv643xx_eth_shared_platform_data orion5x_eth_shared_data = { - .dram = &orion5x_mbus_dram_info, -}; - -static struct resource orion5x_eth_shared_resources[] = { - { - .start = ORION5X_ETH_PHYS_BASE + 0x2000, - .end = ORION5X_ETH_PHYS_BASE + 0x3fff, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_ORION5X_ETH_ERR, - .end = IRQ_ORION5X_ETH_ERR, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device orion5x_eth_shared = { - .name = MV643XX_ETH_SHARED_NAME, - .id = 0, - .dev = { - .platform_data = &orion5x_eth_shared_data, - }, - .num_resources = ARRAY_SIZE(orion5x_eth_shared_resources), - .resource = orion5x_eth_shared_resources, -}; - -static struct resource orion5x_eth_resources[] = { - { - .name = "eth irq", - .start = IRQ_ORION5X_ETH_SUM, - .end = IRQ_ORION5X_ETH_SUM, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device orion5x_eth = { - .name = MV643XX_ETH_NAME, - .id = 0, - .num_resources = 1, - .resource = orion5x_eth_resources, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, -}; - void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data) { - eth_data->shared = &orion5x_eth_shared; - orion5x_eth.dev.platform_data = eth_data; - - platform_device_register(&orion5x_eth_shared); - platform_device_register(&orion5x_eth); + orion_ge00_init(eth_data, &orion5x_mbus_dram_info, + ORION5X_ETH_PHYS_BASE, IRQ_ORION5X_ETH_SUM, + IRQ_ORION5X_ETH_ERR, orion5x_tclk); } /***************************************************************************** * Ethernet switch ****************************************************************************/ -static struct resource orion5x_switch_resources[] = { - { - .start = 0, - .end = 0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device orion5x_switch_device = { - .name = "dsa", - .id = 0, - .num_resources = 0, - .resource = orion5x_switch_resources, -}; - void __init orion5x_eth_switch_init(struct dsa_platform_data *d, int irq) { - int i; - - if (irq != NO_IRQ) { - orion5x_switch_resources[0].start = irq; - orion5x_switch_resources[0].end = irq; - orion5x_switch_device.num_resources = 1; - } - - d->netdev = &orion5x_eth.dev; - for (i = 0; i < d->nr_chips; i++) - d->chip[i].mii_bus = &orion5x_eth_shared.dev; - orion5x_switch_device.dev.platform_data = d; - - platform_device_register(&orion5x_switch_device); + orion_ge00_switch_init(d, irq); } /***************************************************************************** * I2C ****************************************************************************/ -static struct mv64xxx_i2c_pdata orion5x_i2c_pdata = { - .freq_m = 8, /* assumes 166 MHz TCLK */ - .freq_n = 3, - .timeout = 1000, /* Default timeout of 1 second */ -}; - -static struct resource orion5x_i2c_resources[] = { - { - .start = I2C_PHYS_BASE, - .end = I2C_PHYS_BASE + 0x1f, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_ORION5X_I2C, - .end = IRQ_ORION5X_I2C, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device orion5x_i2c = { - .name = MV64XXX_I2C_CTLR_NAME, - .id = 0, - .num_resources = ARRAY_SIZE(orion5x_i2c_resources), - .resource = orion5x_i2c_resources, - .dev = { - .platform_data = &orion5x_i2c_pdata, - }, -}; - void __init orion5x_i2c_init(void) { - platform_device_register(&orion5x_i2c); + orion_i2c_init(I2C_PHYS_BASE, IRQ_ORION5X_I2C, 8); + } /***************************************************************************** * SATA ****************************************************************************/ -static struct resource orion5x_sata_resources[] = { - { - .name = "sata base", - .start = ORION5X_SATA_PHYS_BASE, - .end = ORION5X_SATA_PHYS_BASE + 0x5000 - 1, - .flags = IORESOURCE_MEM, - }, { - .name = "sata irq", - .start = IRQ_ORION5X_SATA, - .end = IRQ_ORION5X_SATA, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device orion5x_sata = { - .name = "sata_mv", - .id = 0, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(orion5x_sata_resources), - .resource = orion5x_sata_resources, -}; - void __init orion5x_sata_init(struct mv_sata_platform_data *sata_data) { - sata_data->dram = &orion5x_mbus_dram_info; - orion5x_sata.dev.platform_data = sata_data; - platform_device_register(&orion5x_sata); + orion_sata_init(sata_data, &orion5x_mbus_dram_info, + ORION5X_SATA_PHYS_BASE, IRQ_ORION5X_SATA); } /***************************************************************************** * SPI ****************************************************************************/ -static struct orion_spi_info orion5x_spi_plat_data = { - .tclk = 0, - .enable_clock_fix = 1, -}; - -static struct resource orion5x_spi_resources[] = { - { - .name = "spi base", - .start = SPI_PHYS_BASE, - .end = SPI_PHYS_BASE + 0x1f, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device orion5x_spi = { - .name = "orion_spi", - .id = 0, - .dev = { - .platform_data = &orion5x_spi_plat_data, - }, - .num_resources = ARRAY_SIZE(orion5x_spi_resources), - .resource = orion5x_spi_resources, -}; - void __init orion5x_spi_init() { - platform_device_register(&orion5x_spi); + orion_spi_init(SPI_PHYS_BASE, orion5x_tclk); } /***************************************************************************** * UART0 ****************************************************************************/ -static struct plat_serial8250_port orion5x_uart0_data[] = { - { - .mapbase = UART0_PHYS_BASE, - .membase = (char *)UART0_VIRT_BASE, - .irq = IRQ_ORION5X_UART0, - .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = 0, - }, { - }, -}; - -static struct resource orion5x_uart0_resources[] = { - { - .start = UART0_PHYS_BASE, - .end = UART0_PHYS_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_ORION5X_UART0, - .end = IRQ_ORION5X_UART0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device orion5x_uart0 = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = orion5x_uart0_data, - }, - .resource = orion5x_uart0_resources, - .num_resources = ARRAY_SIZE(orion5x_uart0_resources), -}; - void __init orion5x_uart0_init(void) { - platform_device_register(&orion5x_uart0); + orion_uart0_init(UART0_VIRT_BASE, UART0_PHYS_BASE, + IRQ_ORION5X_UART0, orion5x_tclk); } - /***************************************************************************** * UART1 ****************************************************************************/ -static struct plat_serial8250_port orion5x_uart1_data[] = { - { - .mapbase = UART1_PHYS_BASE, - .membase = (char *)UART1_VIRT_BASE, - .irq = IRQ_ORION5X_UART1, - .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = 0, - }, { - }, -}; - -static struct resource orion5x_uart1_resources[] = { - { - .start = UART1_PHYS_BASE, - .end = UART1_PHYS_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_ORION5X_UART1, - .end = IRQ_ORION5X_UART1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device orion5x_uart1 = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM1, - .dev = { - .platform_data = orion5x_uart1_data, - }, - .resource = orion5x_uart1_resources, - .num_resources = ARRAY_SIZE(orion5x_uart1_resources), -}; - void __init orion5x_uart1_init(void) { - platform_device_register(&orion5x_uart1); + orion_uart1_init(UART1_VIRT_BASE, UART1_PHYS_BASE, + IRQ_ORION5X_UART1, orion5x_tclk); } - /***************************************************************************** * XOR engine ****************************************************************************/ -struct mv_xor_platform_shared_data orion5x_xor_shared_data = { - .dram = &orion5x_mbus_dram_info, -}; - -static struct resource orion5x_xor_shared_resources[] = { - { - .name = "xor low", - .start = ORION5X_XOR_PHYS_BASE, - .end = ORION5X_XOR_PHYS_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, { - .name = "xor high", - .start = ORION5X_XOR_PHYS_BASE + 0x200, - .end = ORION5X_XOR_PHYS_BASE + 0x2ff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device orion5x_xor_shared = { - .name = MV_XOR_SHARED_NAME, - .id = 0, - .dev = { - .platform_data = &orion5x_xor_shared_data, - }, - .num_resources = ARRAY_SIZE(orion5x_xor_shared_resources), - .resource = orion5x_xor_shared_resources, -}; - -static u64 orion5x_xor_dmamask = DMA_BIT_MASK(32); - -static struct resource orion5x_xor0_resources[] = { - [0] = { - .start = IRQ_ORION5X_XOR0, - .end = IRQ_ORION5X_XOR0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct mv_xor_platform_data orion5x_xor0_data = { - .shared = &orion5x_xor_shared, - .hw_id = 0, - .pool_size = PAGE_SIZE, -}; - -static struct platform_device orion5x_xor0_channel = { - .name = MV_XOR_NAME, - .id = 0, - .num_resources = ARRAY_SIZE(orion5x_xor0_resources), - .resource = orion5x_xor0_resources, - .dev = { - .dma_mask = &orion5x_xor_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(64), - .platform_data = &orion5x_xor0_data, - }, -}; - -static struct resource orion5x_xor1_resources[] = { - [0] = { - .start = IRQ_ORION5X_XOR1, - .end = IRQ_ORION5X_XOR1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct mv_xor_platform_data orion5x_xor1_data = { - .shared = &orion5x_xor_shared, - .hw_id = 1, - .pool_size = PAGE_SIZE, -}; - -static struct platform_device orion5x_xor1_channel = { - .name = MV_XOR_NAME, - .id = 1, - .num_resources = ARRAY_SIZE(orion5x_xor1_resources), - .resource = orion5x_xor1_resources, - .dev = { - .dma_mask = &orion5x_xor_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(64), - .platform_data = &orion5x_xor1_data, - }, -}; - void __init orion5x_xor_init(void) { - platform_device_register(&orion5x_xor_shared); - - /* - * two engines can't do memset simultaneously, this limitation - * satisfied by removing memset support from one of the engines. - */ - dma_cap_set(DMA_MEMCPY, orion5x_xor0_data.cap_mask); - dma_cap_set(DMA_XOR, orion5x_xor0_data.cap_mask); - platform_device_register(&orion5x_xor0_channel); - - dma_cap_set(DMA_MEMCPY, orion5x_xor1_data.cap_mask); - dma_cap_set(DMA_MEMSET, orion5x_xor1_data.cap_mask); - dma_cap_set(DMA_XOR, orion5x_xor1_data.cap_mask); - platform_device_register(&orion5x_xor1_channel); + orion_xor0_init(&orion5x_mbus_dram_info, + ORION5X_XOR_PHYS_BASE, + ORION5X_XOR_PHYS_BASE + 0x200, + IRQ_ORION5X_XOR0, IRQ_ORION5X_XOR1); } -static struct resource orion5x_crypto_res[] = { - { - .name = "regs", - .start = ORION5X_CRYPTO_PHYS_BASE, - .end = ORION5X_CRYPTO_PHYS_BASE + 0xffff, - .flags = IORESOURCE_MEM, - }, { - .name = "sram", - .start = ORION5X_SRAM_PHYS_BASE, - .end = ORION5X_SRAM_PHYS_BASE + SZ_8K - 1, - .flags = IORESOURCE_MEM, - }, { - .name = "crypto interrupt", - .start = IRQ_ORION5X_CESA, - .end = IRQ_ORION5X_CESA, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device orion5x_crypto_device = { - .name = "mv_crypto", - .id = -1, - .num_resources = ARRAY_SIZE(orion5x_crypto_res), - .resource = orion5x_crypto_res, -}; - -static int __init orion5x_crypto_init(void) +/***************************************************************************** + * Cryptographic Engines and Security Accelerator (CESA) + ****************************************************************************/ +static void __init orion5x_crypto_init(void) { int ret; ret = orion5x_setup_sram_win(); if (ret) - return ret; + return; - return platform_device_register(&orion5x_crypto_device); + orion_crypto_init(ORION5X_CRYPTO_PHYS_BASE, ORION5X_SRAM_PHYS_BASE, + SZ_8K, IRQ_ORION5X_CESA); } /***************************************************************************** * Watchdog ****************************************************************************/ -static struct orion_wdt_platform_data orion5x_wdt_data = { - .tclk = 0, -}; - -static struct platform_device orion5x_wdt_device = { - .name = "orion_wdt", - .id = -1, - .dev = { - .platform_data = &orion5x_wdt_data, - }, - .num_resources = 0, -}; - void __init orion5x_wdt_init(void) { - orion5x_wdt_data.tclk = orion5x_tclk; - platform_device_register(&orion5x_wdt_device); + orion_wdt_init(orion5x_tclk); } @@ -685,11 +276,6 @@ void __init orion5x_init(void) orion5x_id(&dev, &rev, &dev_name); printk(KERN_INFO "Orion ID: %s. TCLK=%d.\n", dev_name, orion5x_tclk); - orion5x_eth_shared_data.t_clk = orion5x_tclk; - orion5x_spi_plat_data.tclk = orion5x_tclk; - orion5x_uart0_data[0].uartclk = orion5x_tclk; - orion5x_uart1_data[0].uartclk = orion5x_tclk; - /* * Setup Orion address map */ diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c index 42580757..19cf5bf 100644 --- a/arch/arm/mach-orion5x/d2net-setup.c +++ b/arch/arm/mach-orion5x/d2net-setup.c @@ -267,28 +267,28 @@ static struct platform_device d2net_gpio_buttons = { * General Setup ****************************************************************************/ -static struct orion5x_mpp_mode d2net_mpp_modes[] __initdata = { - { 0, MPP_GPIO }, /* Board ID (bit 0) */ - { 1, MPP_GPIO }, /* Board ID (bit 1) */ - { 2, MPP_GPIO }, /* Board ID (bit 2) */ - { 3, MPP_GPIO }, /* SATA 0 power */ - { 4, MPP_UNUSED }, - { 5, MPP_GPIO }, /* Fan fail detection */ - { 6, MPP_GPIO }, /* Red front LED */ - { 7, MPP_UNUSED }, - { 8, MPP_GPIO }, /* Rear power switch (on|auto) */ - { 9, MPP_GPIO }, /* Rear power switch (auto|off) */ - { 10, MPP_UNUSED }, - { 11, MPP_UNUSED }, - { 12, MPP_GPIO }, /* SATA 1 power */ - { 13, MPP_UNUSED }, - { 14, MPP_SATA_LED }, /* SATA 0 active */ - { 15, MPP_SATA_LED }, /* SATA 1 active */ - { 16, MPP_GPIO }, /* Blue front LED blink control */ - { 17, MPP_UNUSED }, - { 18, MPP_GPIO }, /* Front button (0 = Released, 1 = Pushed ) */ - { 19, MPP_UNUSED }, - { -1 } +static unsigned int d2net_mpp_modes[] __initdata = { + MPP0_GPIO, /* Board ID (bit 0) */ + MPP1_GPIO, /* Board ID (bit 1) */ + MPP2_GPIO, /* Board ID (bit 2) */ + MPP3_GPIO, /* SATA 0 power */ + MPP4_UNUSED, + MPP5_GPIO, /* Fan fail detection */ + MPP6_GPIO, /* Red front LED */ + MPP7_UNUSED, + MPP8_GPIO, /* Rear power switch (on|auto) */ + MPP9_GPIO, /* Rear power switch (auto|off) */ + MPP10_UNUSED, + MPP11_UNUSED, + MPP12_GPIO, /* SATA 1 power */ + MPP13_UNUSED, + MPP14_SATA_LED, /* SATA 0 active */ + MPP15_SATA_LED, /* SATA 1 active */ + MPP16_GPIO, /* Blue front LED blink control */ + MPP17_UNUSED, + MPP18_GPIO, /* Front button (0 = Released, 1 = Pushed ) */ + MPP19_UNUSED, + 0, /* 22: USB port 1 fuse (0 = Fail, 1 = Ok) */ /* 23: Blue front LED off */ /* 24: Inhibit board power off (0 = Disabled, 1 = Enabled) */ diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c index b7d4591..f95d3cb 100644 --- a/arch/arm/mach-orion5x/db88f5281-setup.c +++ b/arch/arm/mach-orion5x/db88f5281-setup.c @@ -298,28 +298,28 @@ static struct i2c_board_info __initdata db88f5281_i2c_rtc = { /***************************************************************************** * General Setup ****************************************************************************/ -static struct orion5x_mpp_mode db88f5281_mpp_modes[] __initdata = { - { 0, MPP_GPIO }, /* USB Over Current */ - { 1, MPP_GPIO }, /* USB Vbat input */ - { 2, MPP_PCI_ARB }, /* PCI_REQn[2] */ - { 3, MPP_PCI_ARB }, /* PCI_GNTn[2] */ - { 4, MPP_PCI_ARB }, /* PCI_REQn[3] */ - { 5, MPP_PCI_ARB }, /* PCI_GNTn[3] */ - { 6, MPP_GPIO }, /* JP0, CON17.2 */ - { 7, MPP_GPIO }, /* JP1, CON17.1 */ - { 8, MPP_GPIO }, /* JP2, CON11.2 */ - { 9, MPP_GPIO }, /* JP3, CON11.3 */ - { 10, MPP_GPIO }, /* RTC int */ - { 11, MPP_GPIO }, /* Baud Rate Generator */ - { 12, MPP_GPIO }, /* PCI int 1 */ - { 13, MPP_GPIO }, /* PCI int 2 */ - { 14, MPP_NAND }, /* NAND_REn[2] */ - { 15, MPP_NAND }, /* NAND_WEn[2] */ - { 16, MPP_UART }, /* UART1_RX */ - { 17, MPP_UART }, /* UART1_TX */ - { 18, MPP_UART }, /* UART1_CTSn */ - { 19, MPP_UART }, /* UART1_RTSn */ - { -1 }, +static unsigned int db88f5281_mpp_modes[] __initdata = { + MPP0_GPIO, /* USB Over Current */ + MPP1_GPIO, /* USB Vbat input */ + MPP2_PCI_ARB, /* PCI_REQn[2] */ + MPP3_PCI_ARB, /* PCI_GNTn[2] */ + MPP4_PCI_ARB, /* PCI_REQn[3] */ + MPP5_PCI_ARB, /* PCI_GNTn[3] */ + MPP6_GPIO, /* JP0, CON17.2 */ + MPP7_GPIO, /* JP1, CON17.1 */ + MPP8_GPIO, /* JP2, CON11.2 */ + MPP9_GPIO, /* JP3, CON11.3 */ + MPP10_GPIO, /* RTC int */ + MPP11_GPIO, /* Baud Rate Generator */ + MPP12_GPIO, /* PCI int 1 */ + MPP13_GPIO, /* PCI int 2 */ + MPP14_NAND, /* NAND_REn[2] */ + MPP15_NAND, /* NAND_WEn[2] */ + MPP16_UART, /* UART1_RX */ + MPP17_UART, /* UART1_TX */ + MPP18_UART, /* UART1_CTSn */ + MPP19_UART, /* UART1_RTSn */ + 0, }; static void __init db88f5281_init(void) diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index 90ab022..855e0e7 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -385,76 +385,76 @@ static struct mv_sata_platform_data dns323_sata_data = { /**************************************************************************** * General Setup */ -static struct orion5x_mpp_mode dns323a_mpp_modes[] __initdata = { - { 0, MPP_PCIE_RST_OUTn }, - { 1, MPP_GPIO }, /* right amber LED (sata ch0) */ - { 2, MPP_GPIO }, /* left amber LED (sata ch1) */ - { 3, MPP_UNUSED }, - { 4, MPP_GPIO }, /* power button LED */ - { 5, MPP_GPIO }, /* power button LED */ - { 6, MPP_GPIO }, /* GMT G751-2f overtemp */ - { 7, MPP_GPIO }, /* M41T80 nIRQ/OUT/SQW */ - { 8, MPP_GPIO }, /* triggers power off */ - { 9, MPP_GPIO }, /* power button switch */ - { 10, MPP_GPIO }, /* reset button switch */ - { 11, MPP_UNUSED }, - { 12, MPP_UNUSED }, - { 13, MPP_UNUSED }, - { 14, MPP_UNUSED }, - { 15, MPP_UNUSED }, - { 16, MPP_UNUSED }, - { 17, MPP_UNUSED }, - { 18, MPP_UNUSED }, - { 19, MPP_UNUSED }, - { -1 }, +static unsigned int dns323a_mpp_modes[] __initdata = { + MPP0_PCIE_RST_OUTn, + MPP1_GPIO, /* right amber LED (sata ch0) */ + MPP2_GPIO, /* left amber LED (sata ch1) */ + MPP3_UNUSED, + MPP4_GPIO, /* power button LED */ + MPP5_GPIO, /* power button LED */ + MPP6_GPIO, /* GMT G751-2f overtemp */ + MPP7_GPIO, /* M41T80 nIRQ/OUT/SQW */ + MPP8_GPIO, /* triggers power off */ + MPP9_GPIO, /* power button switch */ + MPP10_GPIO, /* reset button switch */ + MPP11_UNUSED, + MPP12_UNUSED, + MPP13_UNUSED, + MPP14_UNUSED, + MPP15_UNUSED, + MPP16_UNUSED, + MPP17_UNUSED, + MPP18_UNUSED, + MPP19_UNUSED, + 0, }; -static struct orion5x_mpp_mode dns323b_mpp_modes[] __initdata = { - { 0, MPP_UNUSED }, - { 1, MPP_GPIO }, /* right amber LED (sata ch0) */ - { 2, MPP_GPIO }, /* left amber LED (sata ch1) */ - { 3, MPP_GPIO }, /* system up flag */ - { 4, MPP_GPIO }, /* power button LED */ - { 5, MPP_GPIO }, /* power button LED */ - { 6, MPP_GPIO }, /* GMT G751-2f overtemp */ - { 7, MPP_GPIO }, /* M41T80 nIRQ/OUT/SQW */ - { 8, MPP_GPIO }, /* triggers power off */ - { 9, MPP_GPIO }, /* power button switch */ - { 10, MPP_GPIO }, /* reset button switch */ - { 11, MPP_UNUSED }, - { 12, MPP_SATA_LED }, - { 13, MPP_SATA_LED }, - { 14, MPP_SATA_LED }, - { 15, MPP_SATA_LED }, - { 16, MPP_UNUSED }, - { 17, MPP_UNUSED }, - { 18, MPP_UNUSED }, - { 19, MPP_UNUSED }, - { -1 }, +static unsigned int dns323b_mpp_modes[] __initdata = { + MPP0_UNUSED, + MPP1_GPIO, /* right amber LED (sata ch0) */ + MPP2_GPIO, /* left amber LED (sata ch1) */ + MPP3_GPIO, /* system up flag */ + MPP4_GPIO, /* power button LED */ + MPP5_GPIO, /* power button LED */ + MPP6_GPIO, /* GMT G751-2f overtemp */ + MPP7_GPIO, /* M41T80 nIRQ/OUT/SQW */ + MPP8_GPIO, /* triggers power off */ + MPP9_GPIO, /* power button switch */ + MPP10_GPIO, /* reset button switch */ + MPP11_UNUSED, + MPP12_SATA_LED, + MPP13_SATA_LED, + MPP14_SATA_LED, + MPP15_SATA_LED, + MPP16_UNUSED, + MPP17_UNUSED, + MPP18_UNUSED, + MPP19_UNUSED, + 0, }; -static struct orion5x_mpp_mode dns323c_mpp_modes[] __initdata = { - { 0, MPP_GPIO }, /* ? input */ - { 1, MPP_GPIO }, /* input power switch (0 = pressed) */ - { 2, MPP_GPIO }, /* output power off */ - { 3, MPP_UNUSED }, /* ? output */ - { 4, MPP_UNUSED }, /* ? output */ - { 5, MPP_UNUSED }, /* ? output */ - { 6, MPP_UNUSED }, /* ? output */ - { 7, MPP_UNUSED }, /* ? output */ - { 8, MPP_GPIO }, /* i/o right amber LED */ - { 9, MPP_GPIO }, /* i/o left amber LED */ - { 10, MPP_GPIO }, /* input */ - { 11, MPP_UNUSED }, - { 12, MPP_SATA_LED }, - { 13, MPP_SATA_LED }, - { 14, MPP_SATA_LED }, - { 15, MPP_SATA_LED }, - { 16, MPP_UNUSED }, - { 17, MPP_GPIO }, /* power button LED */ - { 18, MPP_GPIO }, /* fan speed bit 0 */ - { 19, MPP_GPIO }, /* fan speed bit 1 */ - { -1 }, +static unsigned int dns323c_mpp_modes[] __initdata = { + MPP0_GPIO, /* ? input */ + MPP1_GPIO, /* input power switch (0 = pressed) */ + MPP2_GPIO, /* output power off */ + MPP3_UNUSED, /* ? output */ + MPP4_UNUSED, /* ? output */ + MPP5_UNUSED, /* ? output */ + MPP6_UNUSED, /* ? output */ + MPP7_UNUSED, /* ? output */ + MPP8_GPIO, /* i/o right amber LED */ + MPP9_GPIO, /* i/o left amber LED */ + MPP10_GPIO, /* input */ + MPP11_UNUSED, + MPP12_SATA_LED, + MPP13_SATA_LED, + MPP14_SATA_LED, + MPP15_SATA_LED, + MPP16_UNUSED, + MPP17_GPIO, /* power button LED */ + MPP18_GPIO, /* fan speed bit 0 */ + MPP19_GPIO, /* fan speed bit 1 */ + 0, }; /* Rev C1 Fan speed notes: diff --git a/arch/arm/mach-orion5x/edmini_v2-setup.c b/arch/arm/mach-orion5x/edmini_v2-setup.c index d037a90..b67cff0 100644 --- a/arch/arm/mach-orion5x/edmini_v2-setup.c +++ b/arch/arm/mach-orion5x/edmini_v2-setup.c @@ -180,31 +180,31 @@ static struct platform_device edmini_v2_gpio_buttons = { /***************************************************************************** * General Setup ****************************************************************************/ -static struct orion5x_mpp_mode edminiv2_mpp_modes[] __initdata = { - { 0, MPP_UNUSED }, - { 1, MPP_UNUSED }, - { 2, MPP_UNUSED }, - { 3, MPP_GPIO }, /* RTC interrupt */ - { 4, MPP_UNUSED }, - { 5, MPP_UNUSED }, - { 6, MPP_UNUSED }, - { 7, MPP_UNUSED }, - { 8, MPP_UNUSED }, - { 9, MPP_UNUSED }, - { 10, MPP_UNUSED }, - { 11, MPP_UNUSED }, - { 12, MPP_SATA_LED }, /* SATA 0 presence */ - { 13, MPP_SATA_LED }, /* SATA 1 presence */ - { 14, MPP_SATA_LED }, /* SATA 0 active */ - { 15, MPP_SATA_LED }, /* SATA 1 active */ +static unsigned int edminiv2_mpp_modes[] __initdata = { + MPP0_UNUSED, + MPP1_UNUSED, + MPP2_UNUSED, + MPP3_GPIO, /* RTC interrupt */ + MPP4_UNUSED, + MPP5_UNUSED, + MPP6_UNUSED, + MPP7_UNUSED, + MPP8_UNUSED, + MPP9_UNUSED, + MPP10_UNUSED, + MPP11_UNUSED, + MPP12_SATA_LED, /* SATA 0 presence */ + MPP13_SATA_LED, /* SATA 1 presence */ + MPP14_SATA_LED, /* SATA 0 active */ + MPP15_SATA_LED, /* SATA 1 active */ /* 16: Power LED control (0 = On, 1 = Off) */ - { 16, MPP_GPIO }, + MPP16_GPIO, /* 17: Power LED control select (0 = CPLD, 1 = GPIO16) */ - { 17, MPP_GPIO }, + MPP17_GPIO, /* 18: Power button status (0 = Released, 1 = Pressed) */ - { 18, MPP_GPIO }, - { 19, MPP_UNUSED }, - { -1 } + MPP18_GPIO, + MPP19_UNUSED, + 0, }; static void __init edmini_v2_init(void) diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c index 47497c7..c0eb646 100644 --- a/arch/arm/mach-orion5x/kurobox_pro-setup.c +++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c @@ -315,28 +315,28 @@ static void kurobox_pro_power_off(void) /***************************************************************************** * General Setup ****************************************************************************/ -static struct orion5x_mpp_mode kurobox_pro_mpp_modes[] __initdata = { - { 0, MPP_UNUSED }, - { 1, MPP_UNUSED }, - { 2, MPP_GPIO }, /* GPIO Micon */ - { 3, MPP_GPIO }, /* GPIO Rtc */ - { 4, MPP_UNUSED }, - { 5, MPP_UNUSED }, - { 6, MPP_NAND }, /* NAND Flash REn */ - { 7, MPP_NAND }, /* NAND Flash WEn */ - { 8, MPP_UNUSED }, - { 9, MPP_UNUSED }, - { 10, MPP_UNUSED }, - { 11, MPP_UNUSED }, - { 12, MPP_SATA_LED }, /* SATA 0 presence */ - { 13, MPP_SATA_LED }, /* SATA 1 presence */ - { 14, MPP_SATA_LED }, /* SATA 0 active */ - { 15, MPP_SATA_LED }, /* SATA 1 active */ - { 16, MPP_UART }, /* UART1 RXD */ - { 17, MPP_UART }, /* UART1 TXD */ - { 18, MPP_UART }, /* UART1 CTSn */ - { 19, MPP_UART }, /* UART1 RTSn */ - { -1 }, +static unsigned int kurobox_pro_mpp_modes[] __initdata = { + MPP0_UNUSED, + MPP1_UNUSED, + MPP2_GPIO, /* GPIO Micon */ + MPP3_GPIO, /* GPIO Rtc */ + MPP4_UNUSED, + MPP5_UNUSED, + MPP6_NAND, /* NAND Flash REn */ + MPP7_NAND, /* NAND Flash WEn */ + MPP8_UNUSED, + MPP9_UNUSED, + MPP10_UNUSED, + MPP11_UNUSED, + MPP12_SATA_LED, /* SATA 0 presence */ + MPP13_SATA_LED, /* SATA 1 presence */ + MPP14_SATA_LED, /* SATA 0 active */ + MPP15_SATA_LED, /* SATA 1 active */ + MPP16_UART, /* UART1 RXD */ + MPP17_UART, /* UART1 TXD */ + MPP18_UART, /* UART1 CTSn */ + MPP19_UART, /* UART1 RTSn */ + 0, }; static void __init kurobox_pro_init(void) diff --git a/arch/arm/mach-orion5x/ls-chl-setup.c b/arch/arm/mach-orion5x/ls-chl-setup.c index 6ae12aa..5065803 100644 --- a/arch/arm/mach-orion5x/ls-chl-setup.c +++ b/arch/arm/mach-orion5x/ls-chl-setup.c @@ -251,28 +251,28 @@ static struct platform_device lschl_fan_device = { * GPIO Data ****************************************************************************/ -static struct orion5x_mpp_mode lschl_mpp_modes[] __initdata = { - { 0, MPP_GPIO }, /* LED POWER */ - { 1, MPP_GPIO }, /* HDD POWER */ - { 2, MPP_GPIO }, /* LED ALARM */ - { 3, MPP_GPIO }, /* LED INFO */ - { 4, MPP_UNUSED }, - { 5, MPP_UNUSED }, - { 6, MPP_GPIO }, /* FAN LOCK */ - { 7, MPP_GPIO }, /* SW INIT */ - { 8, MPP_GPIO }, /* SW POWER */ - { 9, MPP_GPIO }, /* USB POWER */ - { 10, MPP_GPIO }, /* SW AUTO POWER */ - { 11, MPP_UNUSED }, - { 12, MPP_UNUSED }, - { 13, MPP_UNUSED }, - { 14, MPP_GPIO }, /* FAN HIGH */ - { 15, MPP_GPIO }, /* SW FUNC */ - { 16, MPP_GPIO }, /* FAN LOW */ - { 17, MPP_GPIO }, /* LED FUNC */ - { 18, MPP_UNUSED }, - { 19, MPP_UNUSED }, - { -1 }, +static unsigned int lschl_mpp_modes[] __initdata = { + MPP0_GPIO, /* LED POWER */ + MPP1_GPIO, /* HDD POWER */ + MPP2_GPIO, /* LED ALARM */ + MPP3_GPIO, /* LED INFO */ + MPP4_UNUSED, + MPP5_UNUSED, + MPP6_GPIO, /* FAN LOCK */ + MPP7_GPIO, /* SW INIT */ + MPP8_GPIO, /* SW POWER */ + MPP9_GPIO, /* USB POWER */ + MPP10_GPIO, /* SW AUTO POWER */ + MPP11_UNUSED, + MPP12_UNUSED, + MPP13_UNUSED, + MPP14_GPIO, /* FAN HIGH */ + MPP15_GPIO, /* SW FUNC */ + MPP16_GPIO, /* FAN LOW */ + MPP17_GPIO, /* LED FUNC */ + MPP18_UNUSED, + MPP19_UNUSED, + 0, }; static void __init lschl_init(void) diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c index 7adafd7..8503d0a 100644 --- a/arch/arm/mach-orion5x/ls_hgl-setup.c +++ b/arch/arm/mach-orion5x/ls_hgl-setup.c @@ -200,28 +200,28 @@ static void ls_hgl_power_off(void) #define LS_HGL_GPIO_HDD_POWER 1 -static struct orion5x_mpp_mode ls_hgl_mpp_modes[] __initdata = { - { 0, MPP_GPIO }, /* LED_PWR */ - { 1, MPP_GPIO }, /* HDD_PWR */ - { 2, MPP_GPIO }, /* LED_ALARM */ - { 3, MPP_GPIO }, /* LED_INFO */ - { 4, MPP_UNUSED }, - { 5, MPP_UNUSED }, - { 6, MPP_GPIO }, /* FAN_LCK */ - { 7, MPP_GPIO }, /* INIT */ - { 8, MPP_GPIO }, /* POWER */ - { 9, MPP_GPIO }, /* USB_PWR */ - { 10, MPP_GPIO }, /* AUTO_POWER */ - { 11, MPP_UNUSED }, /* LED_ETH (dummy) */ - { 12, MPP_UNUSED }, - { 13, MPP_UNUSED }, - { 14, MPP_UNUSED }, - { 15, MPP_GPIO }, /* FUNC */ - { 16, MPP_UNUSED }, - { 17, MPP_GPIO }, /* LED_FUNC */ - { 18, MPP_UNUSED }, - { 19, MPP_UNUSED }, - { -1 }, +static unsigned int ls_hgl_mpp_modes[] __initdata = { + MPP0_GPIO, /* LED_PWR */ + MPP1_GPIO, /* HDD_PWR */ + MPP2_GPIO, /* LED_ALARM */ + MPP3_GPIO, /* LED_INFO */ + MPP4_UNUSED, + MPP5_UNUSED, + MPP6_GPIO, /* FAN_LCK */ + MPP7_GPIO, /* INIT */ + MPP8_GPIO, /* POWER */ + MPP9_GPIO, /* USB_PWR */ + MPP10_GPIO, /* AUTO_POWER */ + MPP11_UNUSED, /* LED_ETH (dummy) */ + MPP12_UNUSED, + MPP13_UNUSED, + MPP14_UNUSED, + MPP15_GPIO, /* FUNC */ + MPP16_UNUSED, + MPP17_GPIO, /* LED_FUNC */ + MPP18_UNUSED, + MPP19_UNUSED, + 0, }; static void __init ls_hgl_init(void) diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c index 869958f..9c82723 100644 --- a/arch/arm/mach-orion5x/lsmini-setup.c +++ b/arch/arm/mach-orion5x/lsmini-setup.c @@ -201,28 +201,28 @@ static void lsmini_power_off(void) #define LSMINI_GPIO_HDD_POWER0 1 #define LSMINI_GPIO_HDD_POWER1 19 -static struct orion5x_mpp_mode lsmini_mpp_modes[] __initdata = { - { 0, MPP_UNUSED }, /* LED_RESERVE1 (unused) */ - { 1, MPP_GPIO }, /* HDD_PWR */ - { 2, MPP_GPIO }, /* LED_ALARM */ - { 3, MPP_GPIO }, /* LED_INFO */ - { 4, MPP_UNUSED }, - { 5, MPP_UNUSED }, - { 6, MPP_UNUSED }, - { 7, MPP_UNUSED }, - { 8, MPP_UNUSED }, - { 9, MPP_GPIO }, /* LED_FUNC */ - { 10, MPP_UNUSED }, - { 11, MPP_UNUSED }, /* LED_ETH (dummy) */ - { 12, MPP_UNUSED }, - { 13, MPP_UNUSED }, - { 14, MPP_GPIO }, /* LED_PWR */ - { 15, MPP_GPIO }, /* FUNC */ - { 16, MPP_GPIO }, /* USB_PWR */ - { 17, MPP_GPIO }, /* AUTO_POWER */ - { 18, MPP_GPIO }, /* POWER */ - { 19, MPP_GPIO }, /* HDD_PWR1 */ - { -1 }, +static unsigned int lsmini_mpp_modes[] __initdata = { + MPP0_UNUSED, /* LED_RESERVE1 (unused) */ + MPP1_GPIO, /* HDD_PWR */ + MPP2_GPIO, /* LED_ALARM */ + MPP3_GPIO, /* LED_INFO */ + MPP4_UNUSED, + MPP5_UNUSED, + MPP6_UNUSED, + MPP7_UNUSED, + MPP8_UNUSED, + MPP9_GPIO, /* LED_FUNC */ + MPP10_UNUSED, + MPP11_UNUSED, /* LED_ETH (dummy) */ + MPP12_UNUSED, + MPP13_UNUSED, + MPP14_GPIO, /* LED_PWR */ + MPP15_GPIO, /* FUNC */ + MPP16_GPIO, /* USB_PWR */ + MPP17_GPIO, /* AUTO_POWER */ + MPP18_GPIO, /* POWER */ + MPP19_GPIO, /* HDD_PWR1 */ + 0, }; static void __init lsmini_init(void) diff --git a/arch/arm/mach-orion5x/mpp.c b/arch/arm/mach-orion5x/mpp.c index 2288207..f12c41b 100644 --- a/arch/arm/mach-orion5x/mpp.c +++ b/arch/arm/mach-orion5x/mpp.c @@ -12,154 +12,34 @@ #include <linux/init.h> #include <linux/mbus.h> #include <linux/io.h> -#include <asm/gpio.h> #include <mach/hardware.h> -#include "common.h" +#include <plat/mpp.h> #include "mpp.h" +#include "common.h" -static int is_5181l(void) -{ - u32 dev; - u32 rev; - - orion5x_pcie_id(&dev, &rev); - - return !!(dev == MV88F5181_DEV_ID && rev >= MV88F5181L_REV_A0); -} - -static int is_5182(void) +static unsigned int __init orion5x_variant(void) { u32 dev; u32 rev; orion5x_pcie_id(&dev, &rev); - return !!(dev == MV88F5182_DEV_ID); -} + if (dev == MV88F5181_DEV_ID && rev >= MV88F5181L_REV_A0) + return MPP_F5181_MASK; -static int is_5281(void) -{ - u32 dev; - u32 rev; + if (dev == MV88F5182_DEV_ID) + return MPP_F5182_MASK; - orion5x_pcie_id(&dev, &rev); + if (dev == MV88F5281_DEV_ID) + return MPP_F5281_MASK; - return !!(dev == MV88F5281_DEV_ID); + printk(KERN_ERR "MPP setup: unknown orion5x variant " + "(dev %#x rev %#x)\n", dev, rev); + return 0; } -static int __init determine_type_encoding(int mpp, enum orion5x_mpp_type type) +void __init orion5x_mpp_conf(unsigned int *mpp_list) { - switch (type) { - case MPP_UNUSED: - case MPP_GPIO: - if (mpp == 0) - return 3; - if (mpp >= 1 && mpp <= 15) - return 0; - if (mpp >= 16 && mpp <= 19) { - if (is_5182()) - return 5; - if (type == MPP_UNUSED) - return 0; - } - return -1; - - case MPP_PCIE_RST_OUTn: - if (mpp == 0) - return 0; - return -1; - - case MPP_PCI_ARB: - if (mpp >= 0 && mpp <= 7) - return 2; - return -1; - - case MPP_PCI_PMEn: - if (mpp == 2) - return 3; - return -1; - - case MPP_GIGE: - if (mpp >= 8 && mpp <= 19) - return 1; - return -1; - - case MPP_NAND: - if (is_5182() || is_5281()) { - if (mpp >= 4 && mpp <= 7) - return 4; - if (mpp >= 12 && mpp <= 17) - return 4; - } - return -1; - - case MPP_PCI_CLK: - if (is_5181l() && mpp >= 6 && mpp <= 7) - return 5; - return -1; - - case MPP_SATA_LED: - if (is_5182()) { - if (mpp >= 4 && mpp <= 7) - return 5; - if (mpp >= 12 && mpp <= 15) - return 5; - } - return -1; - - case MPP_UART: - if (mpp >= 16 && mpp <= 19) - return 0; - return -1; - } - - printk(KERN_INFO "unknown MPP type %d\n", type); - - return -1; -} - -void __init orion5x_mpp_conf(struct orion5x_mpp_mode *mode) -{ - u32 mpp_0_7_ctrl = readl(MPP_0_7_CTRL); - u32 mpp_8_15_ctrl = readl(MPP_8_15_CTRL); - u32 mpp_16_19_ctrl = readl(MPP_16_19_CTRL); - - for ( ; mode->mpp >= 0; mode++) { - u32 *reg; - int num_type; - int shift; - - if (mode->mpp >= 0 && mode->mpp <= 7) - reg = &mpp_0_7_ctrl; - else if (mode->mpp >= 8 && mode->mpp <= 15) - reg = &mpp_8_15_ctrl; - else if (mode->mpp >= 16 && mode->mpp <= 19) - reg = &mpp_16_19_ctrl; - else { - printk(KERN_ERR "orion5x_mpp_conf: invalid MPP " - "(%d)\n", mode->mpp); - continue; - } - - num_type = determine_type_encoding(mode->mpp, mode->type); - if (num_type < 0) { - printk(KERN_ERR "orion5x_mpp_conf: invalid MPP " - "combination (%d, %d)\n", mode->mpp, - mode->type); - continue; - } - - shift = (mode->mpp & 7) << 2; - *reg &= ~(0xf << shift); - *reg |= (num_type & 0xf) << shift; - - if (mode->type == MPP_UNUSED && (mode->mpp < 16 || is_5182())) - orion_gpio_set_unused(mode->mpp); - - orion_gpio_set_valid(mode->mpp, !!(mode->type == MPP_GPIO)); - } - - writel(mpp_0_7_ctrl, MPP_0_7_CTRL); - writel(mpp_8_15_ctrl, MPP_8_15_CTRL); - writel(mpp_16_19_ctrl, MPP_16_19_CTRL); + orion_mpp_conf(mpp_list, orion5x_variant(), + MPP_MAX, ORION5X_DEV_BUS_VIRT_BASE); } diff --git a/arch/arm/mach-orion5x/mpp.h b/arch/arm/mach-orion5x/mpp.h index 290e610..eac6897 100644 --- a/arch/arm/mach-orion5x/mpp.h +++ b/arch/arm/mach-orion5x/mpp.h @@ -1,74 +1,129 @@ #ifndef __ARCH_ORION5X_MPP_H #define __ARCH_ORION5X_MPP_H -enum orion5x_mpp_type { - /* - * This MPP is unused. - */ - MPP_UNUSED, - - /* - * This MPP pin is used as a generic GPIO pin. Valid for - * MPPs 0-15 and device bus data pins 16-31. On 5182, also - * valid for MPPs 16-19. - */ - MPP_GPIO, - - /* - * This MPP is used as PCIe_RST_OUTn pin. Valid for - * MPP 0 only. - */ - MPP_PCIE_RST_OUTn, - - /* - * This MPP is used as PCI arbiter pin (REQn/GNTn). - * Valid for MPPs 0-7 only. - */ - MPP_PCI_ARB, - - /* - * This MPP is used as PCI_PMEn pin. Valid for MPP 2 only. - */ - MPP_PCI_PMEn, - - /* - * This MPP is used as GigE half-duplex (COL, CRS) or GMII - * (RXERR, CRS, TXERR, TXD[7:4], RXD[7:4]) pin. Valid for - * MPPs 8-19 only. - */ - MPP_GIGE, - - /* - * This MPP is used as NAND REn/WEn pin. Valid for MPPs - * 4-7 and 12-17 only, and only on the 5181l/5182/5281. - */ - MPP_NAND, - - /* - * This MPP is used as a PCI clock output pin. Valid for - * MPPs 6-7 only, and only on the 5181l. - */ - MPP_PCI_CLK, - - /* - * This MPP is used as a SATA presence/activity LED. - * Valid for MPPs 4-7 and 12-15 only, and only on the 5182. - */ - MPP_SATA_LED, - - /* - * This MPP is used as UART1 RXD/TXD/CTSn/RTSn pin. - * Valid for MPPs 16-19 only. - */ - MPP_UART, -}; - -struct orion5x_mpp_mode { - int mpp; - enum orion5x_mpp_type type; -}; - -void orion5x_mpp_conf(struct orion5x_mpp_mode *mode); +#define MPP(_num, _sel, _in, _out, _F5181l, _F5182, _F5281) ( \ + /* MPP number */ ((_num) & 0xff) | \ + /* MPP select value */ (((_sel) & 0xf) << 8) | \ + /* may be input signal */ ((!!(_in)) << 12) | \ + /* may be output signal */ ((!!(_out)) << 13) | \ + /* available on F5181l */ ((!!(_F5181l)) << 14) | \ + /* available on F5182 */ ((!!(_F5182)) << 15) | \ + /* available on F5281 */ ((!!(_F5281)) << 16)) + /* num sel i o 5181 5182 5281 */ + +#define MPP_F5181_MASK MPP(0, 0x0, 0, 0, 1, 0, 0) +#define MPP_F5182_MASK MPP(0, 0x0, 0, 0, 0, 1, 0) +#define MPP_F5281_MASK MPP(0, 0x0, 0, 0, 0, 0, 1) + +#define MPP0_UNUSED MPP(0, 0x3, 0, 0, 1, 1, 1) +#define MPP0_GPIO MPP(0, 0x3, 1, 1, 1, 1, 1) +#define MPP0_PCIE_RST_OUTn MPP(0, 0x0, 0, 0, 1, 1, 1) +#define MPP0_PCI_ARB MPP(0, 0x2, 0, 0, 1, 1, 1) + +#define MPP1_UNUSED MPP(1, 0x0, 0, 0, 1, 1, 1) +#define MPP1_GPIO MPP(1, 0x0, 1, 1, 1, 1, 1) +#define MPP1_PCI_ARB MPP(1, 0x2, 0, 0, 1, 1, 1) + +#define MPP2_UNUSED MPP(2, 0x0, 0, 0, 1, 1, 1) +#define MPP2_GPIO MPP(2, 0x0, 1, 1, 1, 1, 1) +#define MPP2_PCI_ARB MPP(2, 0x2, 0, 0, 1, 1, 1) +#define MPP2_PCI_PMEn MPP(2, 0x3, 0, 0, 1, 1, 1) + +#define MPP3_UNUSED MPP(3, 0x0, 0, 0, 1, 1, 1) +#define MPP3_GPIO MPP(3, 0x0, 1, 1, 1, 1, 1) +#define MPP3_PCI_ARB MPP(3, 0x2, 0, 0, 1, 1, 1) + +#define MPP4_UNUSED MPP(4, 0x0, 0, 0, 1, 1, 1) +#define MPP4_GPIO MPP(4, 0x0, 1, 1, 1, 1, 1) +#define MPP4_PCI_ARB MPP(4, 0x2, 0, 0, 1, 1, 1) +#define MPP4_NAND MPP(4, 0x4, 0, 0, 0, 1, 1) +#define MPP4_SATA_LED MPP(4, 0x5, 0, 0, 0, 1, 0) + +#define MPP5_UNUSED MPP(5, 0x0, 0, 0, 1, 1, 1) +#define MPP5_GPIO MPP(5, 0x0, 1, 1, 1, 1, 1) +#define MPP5_PCI_ARB MPP(5, 0x2, 0, 0, 1, 1, 1) +#define MPP5_NAND MPP(5, 0x4, 0, 0, 0, 1, 1) +#define MPP5_SATA_LED MPP(5, 0x5, 0, 0, 0, 1, 0) + +#define MPP6_UNUSED MPP(6, 0x0, 0, 0, 1, 1, 1) +#define MPP6_GPIO MPP(6, 0x0, 1, 1, 1, 1, 1) +#define MPP6_PCI_ARB MPP(6, 0x2, 0, 0, 1, 1, 1) +#define MPP6_NAND MPP(6, 0x4, 0, 0, 0, 1, 1) +#define MPP6_PCI_CLK MPP(6, 0x5, 0, 0, 1, 0, 0) +#define MPP6_SATA_LED MPP(6, 0x5, 0, 0, 0, 1, 0) + +#define MPP7_UNUSED MPP(7, 0x0, 0, 0, 1, 1, 1) +#define MPP7_GPIO MPP(7, 0x0, 1, 1, 1, 1, 1) +#define MPP7_PCI_ARB MPP(7, 0x2, 0, 0, 1, 1, 1) +#define MPP7_NAND MPP(7, 0x4, 0, 0, 0, 1, 1) +#define MPP7_PCI_CLK MPP(7, 0x5, 0, 0, 1, 0, 0) +#define MPP7_SATA_LED MPP(7, 0x5, 0, 0, 0, 1, 0) + +#define MPP8_UNUSED MPP(8, 0x0, 0, 0, 1, 1, 1) +#define MPP8_GPIO MPP(8, 0x0, 1, 1, 1, 1, 1) +#define MPP8_GIGE MPP(8, 0x1, 0, 0, 1, 1, 1) + +#define MPP9_UNUSED MPP(9, 0x0, 0, 0, 1, 1, 1) +#define MPP9_GPIO MPP(9, 0x0, 0, 0, 1, 1, 1) +#define MPP9_GIGE MPP(9, 0x1, 1, 1, 1, 1, 1) + +#define MPP10_UNUSED MPP(10, 0x0, 0, 0, 1, 1, 1) +#define MPP10_GPIO MPP(10, 0x0, 1, 1, 1, 1, 1) +#define MPP10_GIGE MPP(10, 0x1, 0, 0, 1, 1, 1) + +#define MPP11_UNUSED MPP(11, 0x0, 0, 0, 1, 1, 1) +#define MPP11_GPIO MPP(11, 0x0, 1, 1, 1, 1, 1) +#define MPP11_GIGE MPP(11, 0x1, 0, 0, 1, 1, 1) + +#define MPP12_UNUSED MPP(12, 0x0, 0, 0, 1, 1, 1) +#define MPP12_GPIO MPP(12, 0x0, 1, 1, 1, 1, 1) +#define MPP12_GIGE MPP(12, 0x1, 0, 0, 1, 1, 1) +#define MPP12_NAND MPP(12, 0x4, 0, 0, 0, 1, 1) +#define MPP12_SATA_LED MPP(12, 0x5, 0, 0, 0, 1, 0) + +#define MPP13_UNUSED MPP(13, 0x0, 0, 0, 1, 1, 1) +#define MPP13_GPIO MPP(13, 0x0, 1, 1, 1, 1, 1) +#define MPP13_GIGE MPP(13, 0x1, 0, 0, 1, 1, 1) +#define MPP13_NAND MPP(13, 0x4, 0, 0, 0, 1, 1) +#define MPP13_SATA_LED MPP(13, 0x5, 0, 0, 0, 1, 0) + +#define MPP14_UNUSED MPP(14, 0x0, 0, 0, 1, 1, 1) +#define MPP14_GPIO MPP(14, 0x0, 1, 1, 1, 1, 1) +#define MPP14_GIGE MPP(14, 0x1, 0, 0, 1, 1, 1) +#define MPP14_NAND MPP(14, 0x4, 0, 0, 0, 1, 1) +#define MPP14_SATA_LED MPP(14, 0x5, 0, 0, 0, 1, 0) + +#define MPP15_UNUSED MPP(15, 0x0, 0, 0, 1, 1, 1) +#define MPP15_GPIO MPP(15, 0x0, 1, 1, 1, 1, 1) +#define MPP15_GIGE MPP(15, 0x1, 0, 0, 1, 1, 1) +#define MPP15_NAND MPP(15, 0x4, 0, 0, 0, 1, 1) +#define MPP15_SATA_LED MPP(15, 0x5, 0, 0, 0, 1, 0) + +#define MPP16_UNUSED MPP(16, 0x0, 0, 0, 1, 1, 1) +#define MPP16_GPIO MPP(16, 0x5, 1, 1, 0, 1, 0) +#define MPP16_GIGE MPP(16, 0x1, 0, 0, 1, 1, 1) +#define MPP16_NAND MPP(16, 0x4, 0, 0, 0, 1, 1) +#define MPP16_UART MPP(16, 0x0, 0, 0, 0, 1, 1) + +#define MPP17_UNUSED MPP(17, 0x0, 0, 0, 1, 1, 1) +#define MPP17_GPIO MPP(17, 0x5, 1, 1, 0, 1, 0) +#define MPP17_GIGE MPP(17, 0x1, 0, 0, 1, 1, 1) +#define MPP17_NAND MPP(17, 0x4, 0, 0, 0, 1, 1) +#define MPP17_UART MPP(17, 0x0, 0, 0, 0, 1, 1) + +#define MPP18_UNUSED MPP(18, 0x0, 0, 0, 1, 1, 1) +#define MPP18_GPIO MPP(18, 0x5, 1, 1, 0, 1, 0) +#define MPP18_GIGE MPP(18, 0x1, 0, 0, 1, 1, 1) +#define MPP18_UART MPP(18, 0x0, 0, 0, 0, 1, 1) + +#define MPP19_UNUSED MPP(19, 0x0, 0, 0, 1, 1, 1) +#define MPP19_GPIO MPP(19, 0x5, 1, 1, 0, 1, 0) +#define MPP19_GIGE MPP(19, 0x1, 0, 0, 1, 1, 1) +#define MPP19_UART MPP(19, 0x0, 0, 0, 0, 1, 1) + +#define MPP_MAX 19 + +void orion5x_mpp_conf(unsigned int *mpp_list); #endif diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c index b43b208..59263b7 100644 --- a/arch/arm/mach-orion5x/mss2-setup.c +++ b/arch/arm/mach-orion5x/mss2-setup.c @@ -193,28 +193,28 @@ static void mss2_power_off(void) /**************************************************************************** * General Setup ****************************************************************************/ -static struct orion5x_mpp_mode mss2_mpp_modes[] __initdata = { - { 0, MPP_GPIO }, /* Power LED */ - { 1, MPP_GPIO }, /* Error LED */ - { 2, MPP_UNUSED }, - { 3, MPP_GPIO }, /* RTC interrupt */ - { 4, MPP_GPIO }, /* HDD ind. (Single/Dual)*/ - { 5, MPP_GPIO }, /* HD0 5V control */ - { 6, MPP_GPIO }, /* HD0 12V control */ - { 7, MPP_GPIO }, /* HD1 5V control */ - { 8, MPP_GPIO }, /* HD1 12V control */ - { 9, MPP_UNUSED }, - { 10, MPP_GPIO }, /* Fan control */ - { 11, MPP_GPIO }, /* Power button */ - { 12, MPP_GPIO }, /* Reset button */ - { 13, MPP_UNUSED }, - { 14, MPP_SATA_LED }, /* SATA 0 active */ - { 15, MPP_SATA_LED }, /* SATA 1 active */ - { 16, MPP_UNUSED }, - { 17, MPP_UNUSED }, - { 18, MPP_UNUSED }, - { 19, MPP_UNUSED }, - { -1 }, +static unsigned int mss2_mpp_modes[] __initdata = { + MPP0_GPIO, /* Power LED */ + MPP1_GPIO, /* Error LED */ + MPP2_UNUSED, + MPP3_GPIO, /* RTC interrupt */ + MPP4_GPIO, /* HDD ind. (Single/Dual)*/ + MPP5_GPIO, /* HD0 5V control */ + MPP6_GPIO, /* HD0 12V control */ + MPP7_GPIO, /* HD1 5V control */ + MPP8_GPIO, /* HD1 12V control */ + MPP9_UNUSED, + MPP10_GPIO, /* Fan control */ + MPP11_GPIO, /* Power button */ + MPP12_GPIO, /* Reset button */ + MPP13_UNUSED, + MPP14_SATA_LED, /* SATA 0 active */ + MPP15_SATA_LED, /* SATA 1 active */ + MPP16_UNUSED, + MPP17_UNUSED, + MPP18_UNUSED, + MPP19_UNUSED, + 0, }; static void __init mss2_init(void) diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c index c55d071..63ff10c 100644 --- a/arch/arm/mach-orion5x/mv2120-setup.c +++ b/arch/arm/mach-orion5x/mv2120-setup.c @@ -108,28 +108,28 @@ static struct platform_device mv2120_button_device = { /**************************************************************************** * General Setup ****************************************************************************/ -static struct orion5x_mpp_mode mv2120_mpp_modes[] __initdata = { - { 0, MPP_GPIO }, /* Sys status LED */ - { 1, MPP_GPIO }, /* Sys error LED */ - { 2, MPP_GPIO }, /* OverTemp interrupt */ - { 3, MPP_GPIO }, /* RTC interrupt */ - { 4, MPP_GPIO }, /* V_LED 5V */ - { 5, MPP_GPIO }, /* V_LED 3.3V */ - { 6, MPP_UNUSED }, - { 7, MPP_UNUSED }, - { 8, MPP_GPIO }, /* SATA 0 fail LED */ - { 9, MPP_GPIO }, /* SATA 1 fail LED */ - { 10, MPP_UNUSED }, - { 11, MPP_UNUSED }, - { 12, MPP_SATA_LED }, /* SATA 0 presence */ - { 13, MPP_SATA_LED }, /* SATA 1 presence */ - { 14, MPP_SATA_LED }, /* SATA 0 active */ - { 15, MPP_SATA_LED }, /* SATA 1 active */ - { 16, MPP_UNUSED }, - { 17, MPP_GPIO }, /* Reset button */ - { 18, MPP_GPIO }, /* Power button */ - { 19, MPP_GPIO }, /* Power off */ - { -1 }, +static unsigned int mv2120_mpp_modes[] __initdata = { + MPP0_GPIO, /* Sys status LED */ + MPP1_GPIO, /* Sys error LED */ + MPP2_GPIO, /* OverTemp interrupt */ + MPP3_GPIO, /* RTC interrupt */ + MPP4_GPIO, /* V_LED 5V */ + MPP5_GPIO, /* V_LED 3.3V */ + MPP6_UNUSED, + MPP7_UNUSED, + MPP8_GPIO, /* SATA 0 fail LED */ + MPP9_GPIO, /* SATA 1 fail LED */ + MPP10_UNUSED, + MPP11_UNUSED, + MPP12_SATA_LED, /* SATA 0 presence */ + MPP13_SATA_LED, /* SATA 1 presence */ + MPP14_SATA_LED, /* SATA 0 active */ + MPP15_SATA_LED, /* SATA 1 active */ + MPP16_UNUSED, + MPP17_GPIO, /* Reset button */ + MPP18_GPIO, /* Power button */ + MPP19_GPIO, /* Power off */ + 0, }; static struct i2c_board_info __initdata mv2120_i2c_rtc = { diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c index a5930f8..e43b39c 100644 --- a/arch/arm/mach-orion5x/net2big-setup.c +++ b/arch/arm/mach-orion5x/net2big-setup.c @@ -339,28 +339,28 @@ static struct platform_device net2big_gpio_buttons = { * General Setup ****************************************************************************/ -static struct orion5x_mpp_mode net2big_mpp_modes[] __initdata = { - { 0, MPP_GPIO }, /* Raid mode (bit 0) */ - { 1, MPP_GPIO }, /* USB port 2 fuse (0 = Fail, 1 = Ok) */ - { 2, MPP_GPIO }, /* Raid mode (bit 1) */ - { 3, MPP_GPIO }, /* Board ID (bit 0) */ - { 4, MPP_GPIO }, /* Fan activity (0 = Off, 1 = On) */ - { 5, MPP_GPIO }, /* Fan fail detection */ - { 6, MPP_GPIO }, /* Red front LED (0 = Off, 1 = On) */ - { 7, MPP_GPIO }, /* Disable initial blinking on front LED */ - { 8, MPP_GPIO }, /* Rear power switch (on|auto) */ - { 9, MPP_GPIO }, /* Rear power switch (auto|off) */ - { 10, MPP_GPIO }, /* SATA 1 red LED (0 = Off, 1 = On) */ - { 11, MPP_GPIO }, /* SATA 0 red LED (0 = Off, 1 = On) */ - { 12, MPP_GPIO }, /* Board ID (bit 1) */ - { 13, MPP_GPIO }, /* SATA 1 blue LED blink control */ - { 14, MPP_SATA_LED }, - { 15, MPP_SATA_LED }, - { 16, MPP_GPIO }, /* Blue front LED control */ - { 17, MPP_GPIO }, /* SATA 0 blue LED blink control */ - { 18, MPP_GPIO }, /* Front button (0 = Released, 1 = Pushed ) */ - { 19, MPP_GPIO }, /* SATA{0,1} power On/Off request */ - { -1 } +static unsigned int net2big_mpp_modes[] __initdata = { + MPP0_GPIO, /* Raid mode (bit 0) */ + MPP1_GPIO, /* USB port 2 fuse (0 = Fail, 1 = Ok) */ + MPP2_GPIO, /* Raid mode (bit 1) */ + MPP3_GPIO, /* Board ID (bit 0) */ + MPP4_GPIO, /* Fan activity (0 = Off, 1 = On) */ + MPP5_GPIO, /* Fan fail detection */ + MPP6_GPIO, /* Red front LED (0 = Off, 1 = On) */ + MPP7_GPIO, /* Disable initial blinking on front LED */ + MPP8_GPIO, /* Rear power switch (on|auto) */ + MPP9_GPIO, /* Rear power switch (auto|off) */ + MPP10_GPIO, /* SATA 1 red LED (0 = Off, 1 = On) */ + MPP11_GPIO, /* SATA 0 red LED (0 = Off, 1 = On) */ + MPP12_GPIO, /* Board ID (bit 1) */ + MPP13_GPIO, /* SATA 1 blue LED blink control */ + MPP14_SATA_LED, + MPP15_SATA_LED, + MPP16_GPIO, /* Blue front LED control */ + MPP17_GPIO, /* SATA 0 blue LED blink control */ + MPP18_GPIO, /* Front button (0 = Released, 1 = Pushed ) */ + MPP19_GPIO, /* SATA{0,1} power On/Off request */ + 0, /* 22: USB port 1 fuse (0 = Fail, 1 = Ok) */ /* 23: SATA 0 power status */ /* 24: Board power off */ diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c index 34310ab..9eec7c2 100644 --- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c +++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c @@ -64,28 +64,28 @@ static struct platform_device rd88f5181l_fxo_nor_boot_flash = { /***************************************************************************** * General Setup ****************************************************************************/ -static struct orion5x_mpp_mode rd88f5181l_fxo_mpp_modes[] __initdata = { - { 0, MPP_GPIO }, /* LED1 CardBus LED (front panel) */ - { 1, MPP_GPIO }, /* PCI_intA */ - { 2, MPP_GPIO }, /* Hard Reset / Factory Init*/ - { 3, MPP_GPIO }, /* FXS or DAA select */ - { 4, MPP_GPIO }, /* LED6 - phone LED (front panel) */ - { 5, MPP_GPIO }, /* LED5 - phone LED (front panel) */ - { 6, MPP_PCI_CLK }, /* CPU PCI refclk */ - { 7, MPP_PCI_CLK }, /* PCI/PCIe refclk */ - { 8, MPP_GPIO }, /* CardBus reset */ - { 9, MPP_GPIO }, /* GE_RXERR */ - { 10, MPP_GPIO }, /* LED2 MiniPCI LED (front panel) */ - { 11, MPP_GPIO }, /* Lifeline control */ - { 12, MPP_GIGE }, /* GE_TXD[4] */ - { 13, MPP_GIGE }, /* GE_TXD[5] */ - { 14, MPP_GIGE }, /* GE_TXD[6] */ - { 15, MPP_GIGE }, /* GE_TXD[7] */ - { 16, MPP_GIGE }, /* GE_RXD[4] */ - { 17, MPP_GIGE }, /* GE_RXD[5] */ - { 18, MPP_GIGE }, /* GE_RXD[6] */ - { 19, MPP_GIGE }, /* GE_RXD[7] */ - { -1 }, +static unsigned int rd88f5181l_fxo_mpp_modes[] __initdata = { + MPP0_GPIO, /* LED1 CardBus LED (front panel) */ + MPP1_GPIO, /* PCI_intA */ + MPP2_GPIO, /* Hard Reset / Factory Init*/ + MPP3_GPIO, /* FXS or DAA select */ + MPP4_GPIO, /* LED6 - phone LED (front panel) */ + MPP5_GPIO, /* LED5 - phone LED (front panel) */ + MPP6_PCI_CLK, /* CPU PCI refclk */ + MPP7_PCI_CLK, /* PCI/PCIe refclk */ + MPP8_GPIO, /* CardBus reset */ + MPP9_GPIO, /* GE_RXERR */ + MPP10_GPIO, /* LED2 MiniPCI LED (front panel) */ + MPP11_GPIO, /* Lifeline control */ + MPP12_GIGE, /* GE_TXD[4] */ + MPP13_GIGE, /* GE_TXD[5] */ + MPP14_GIGE, /* GE_TXD[6] */ + MPP15_GIGE, /* GE_TXD[7] */ + MPP16_GIGE, /* GE_RXD[4] */ + MPP17_GIGE, /* GE_RXD[5] */ + MPP18_GIGE, /* GE_RXD[6] */ + MPP19_GIGE, /* GE_RXD[7] */ + 0, }; static struct mv643xx_eth_platform_data rd88f5181l_fxo_eth_data = { diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c index c1f79fa..0cc90bbf 100644 --- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c +++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c @@ -65,28 +65,28 @@ static struct platform_device rd88f5181l_ge_nor_boot_flash = { /***************************************************************************** * General Setup ****************************************************************************/ -static struct orion5x_mpp_mode rd88f5181l_ge_mpp_modes[] __initdata = { - { 0, MPP_GPIO }, /* LED1 */ - { 1, MPP_GPIO }, /* LED5 */ - { 2, MPP_GPIO }, /* LED4 */ - { 3, MPP_GPIO }, /* LED3 */ - { 4, MPP_GPIO }, /* PCI_intA */ - { 5, MPP_GPIO }, /* RTC interrupt */ - { 6, MPP_PCI_CLK }, /* CPU PCI refclk */ - { 7, MPP_PCI_CLK }, /* PCI/PCIe refclk */ - { 8, MPP_GPIO }, /* 88e6131 interrupt */ - { 9, MPP_GPIO }, /* GE_RXERR */ - { 10, MPP_GPIO }, /* PCI_intB */ - { 11, MPP_GPIO }, /* LED2 */ - { 12, MPP_GIGE }, /* GE_TXD[4] */ - { 13, MPP_GIGE }, /* GE_TXD[5] */ - { 14, MPP_GIGE }, /* GE_TXD[6] */ - { 15, MPP_GIGE }, /* GE_TXD[7] */ - { 16, MPP_GIGE }, /* GE_RXD[4] */ - { 17, MPP_GIGE }, /* GE_RXD[5] */ - { 18, MPP_GIGE }, /* GE_RXD[6] */ - { 19, MPP_GIGE }, /* GE_RXD[7] */ - { -1 }, +static unsigned int rd88f5181l_ge_mpp_modes[] __initdata = { + MPP0_GPIO, /* LED1 */ + MPP1_GPIO, /* LED5 */ + MPP2_GPIO, /* LED4 */ + MPP3_GPIO, /* LED3 */ + MPP4_GPIO, /* PCI_intA */ + MPP5_GPIO, /* RTC interrupt */ + MPP6_PCI_CLK, /* CPU PCI refclk */ + MPP7_PCI_CLK, /* PCI/PCIe refclk */ + MPP8_GPIO, /* 88e6131 interrupt */ + MPP9_GPIO, /* GE_RXERR */ + MPP10_GPIO, /* PCI_intB */ + MPP11_GPIO, /* LED2 */ + MPP12_GIGE, /* GE_TXD[4] */ + MPP13_GIGE, /* GE_TXD[5] */ + MPP14_GIGE, /* GE_TXD[6] */ + MPP15_GIGE, /* GE_TXD[7] */ + MPP16_GIGE, /* GE_RXD[4] */ + MPP17_GIGE, /* GE_RXD[5] */ + MPP18_GIGE, /* GE_RXD[6] */ + MPP19_GIGE, /* GE_RXD[7] */ + 0, }; static struct mv643xx_eth_platform_data rd88f5181l_ge_eth_data = { diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c index 4fc4677..48da39b 100644 --- a/arch/arm/mach-orion5x/rd88f5182-setup.c +++ b/arch/arm/mach-orion5x/rd88f5182-setup.c @@ -241,28 +241,28 @@ static struct mv_sata_platform_data rd88f5182_sata_data = { /***************************************************************************** * General Setup ****************************************************************************/ -static struct orion5x_mpp_mode rd88f5182_mpp_modes[] __initdata = { - { 0, MPP_GPIO }, /* Debug Led */ - { 1, MPP_GPIO }, /* Reset Switch */ - { 2, MPP_UNUSED }, - { 3, MPP_GPIO }, /* RTC Int */ - { 4, MPP_GPIO }, - { 5, MPP_GPIO }, - { 6, MPP_GPIO }, /* PCI_intA */ - { 7, MPP_GPIO }, /* PCI_intB */ - { 8, MPP_UNUSED }, - { 9, MPP_UNUSED }, - { 10, MPP_UNUSED }, - { 11, MPP_UNUSED }, - { 12, MPP_SATA_LED }, /* SATA 0 presence */ - { 13, MPP_SATA_LED }, /* SATA 1 presence */ - { 14, MPP_SATA_LED }, /* SATA 0 active */ - { 15, MPP_SATA_LED }, /* SATA 1 active */ - { 16, MPP_UNUSED }, - { 17, MPP_UNUSED }, - { 18, MPP_UNUSED }, - { 19, MPP_UNUSED }, - { -1 }, +static unsigned int rd88f5182_mpp_modes[] __initdata = { + MPP0_GPIO, /* Debug Led */ + MPP1_GPIO, /* Reset Switch */ + MPP2_UNUSED, + MPP3_GPIO, /* RTC Int */ + MPP4_GPIO, + MPP5_GPIO, + MPP6_GPIO, /* PCI_intA */ + MPP7_GPIO, /* PCI_intB */ + MPP8_UNUSED, + MPP9_UNUSED, + MPP10_UNUSED, + MPP11_UNUSED, + MPP12_SATA_LED, /* SATA 0 presence */ + MPP13_SATA_LED, /* SATA 1 presence */ + MPP14_SATA_LED, /* SATA 0 active */ + MPP15_SATA_LED, /* SATA 1 active */ + MPP16_UNUSED, + MPP17_UNUSED, + MPP18_UNUSED, + MPP19_UNUSED, + 0, }; static void __init rd88f5182_init(void) diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c index b080c69..ad2eba9 100644 --- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c +++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c @@ -27,7 +27,6 @@ #include <asm/mach/pci.h> #include <mach/orion5x.h> #include "common.h" -#include "mpp.h" static struct mv643xx_eth_platform_data rd88f6183ap_ge_eth_data = { .phy_addr = -1, diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c index 6160041..29ce826 100644 --- a/arch/arm/mach-orion5x/terastation_pro2-setup.c +++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c @@ -295,28 +295,28 @@ static void tsp2_power_off(void) /***************************************************************************** * General Setup ****************************************************************************/ -static struct orion5x_mpp_mode tsp2_mpp_modes[] __initdata = { - { 0, MPP_PCIE_RST_OUTn }, - { 1, MPP_UNUSED }, - { 2, MPP_UNUSED }, - { 3, MPP_UNUSED }, - { 4, MPP_NAND }, /* BOOT NAND Flash REn */ - { 5, MPP_NAND }, /* BOOT NAND Flash WEn */ - { 6, MPP_NAND }, /* BOOT NAND Flash HREn[0] */ - { 7, MPP_NAND }, /* BOOT NAND Flash WEn[0] */ - { 8, MPP_GPIO }, /* MICON int */ - { 9, MPP_GPIO }, /* RTC int */ - { 10, MPP_UNUSED }, - { 11, MPP_GPIO }, /* PCI Int A */ - { 12, MPP_UNUSED }, - { 13, MPP_GPIO }, /* UPS on UART0 enable */ - { 14, MPP_GPIO }, /* UPS low battery detection */ - { 15, MPP_UNUSED }, - { 16, MPP_UART }, /* UART1 RXD */ - { 17, MPP_UART }, /* UART1 TXD */ - { 18, MPP_UART }, /* UART1 CTSn */ - { 19, MPP_UART }, /* UART1 RTSn */ - { -1 }, +static unsigned int tsp2_mpp_modes[] __initdata = { + MPP0_PCIE_RST_OUTn, + MPP1_UNUSED, + MPP2_UNUSED, + MPP3_UNUSED, + MPP4_NAND, /* BOOT NAND Flash REn */ + MPP5_NAND, /* BOOT NAND Flash WEn */ + MPP6_NAND, /* BOOT NAND Flash HREn[0] */ + MPP7_NAND, /* BOOT NAND Flash WEn[0] */ + MPP8_GPIO, /* MICON int */ + MPP9_GPIO, /* RTC int */ + MPP10_UNUSED, + MPP11_GPIO, /* PCI Int A */ + MPP12_UNUSED, + MPP13_GPIO, /* UPS on UART0 enable */ + MPP14_GPIO, /* UPS low battery detection */ + MPP15_UNUSED, + MPP16_UART, /* UART1 RXD */ + MPP17_UART, /* UART1 TXD */ + MPP18_UART, /* UART1 CTSn */ + MPP19_UART, /* UART1 RTSn */ + 0, }; static void __init tsp2_init(void) diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c index e6d6449..47162fd 100644 --- a/arch/arm/mach-orion5x/ts209-setup.c +++ b/arch/arm/mach-orion5x/ts209-setup.c @@ -244,28 +244,28 @@ static struct mv_sata_platform_data qnap_ts209_sata_data = { * General Setup ****************************************************************************/ -static struct orion5x_mpp_mode ts209_mpp_modes[] __initdata = { - { 0, MPP_UNUSED }, - { 1, MPP_GPIO }, /* USB copy button */ - { 2, MPP_GPIO }, /* Load defaults button */ - { 3, MPP_GPIO }, /* GPIO RTC */ - { 4, MPP_UNUSED }, - { 5, MPP_UNUSED }, - { 6, MPP_GPIO }, /* PCI Int A */ - { 7, MPP_GPIO }, /* PCI Int B */ - { 8, MPP_UNUSED }, - { 9, MPP_UNUSED }, - { 10, MPP_UNUSED }, - { 11, MPP_UNUSED }, - { 12, MPP_SATA_LED }, /* SATA 0 presence */ - { 13, MPP_SATA_LED }, /* SATA 1 presence */ - { 14, MPP_SATA_LED }, /* SATA 0 active */ - { 15, MPP_SATA_LED }, /* SATA 1 active */ - { 16, MPP_UART }, /* UART1 RXD */ - { 17, MPP_UART }, /* UART1 TXD */ - { 18, MPP_GPIO }, /* SW_RST */ - { 19, MPP_UNUSED }, - { -1 }, +static unsigned int ts209_mpp_modes[] __initdata = { + MPP0_UNUSED, + MPP1_GPIO, /* USB copy button */ + MPP2_GPIO, /* Load defaults button */ + MPP3_GPIO, /* GPIO RTC */ + MPP4_UNUSED, + MPP5_UNUSED, + MPP6_GPIO, /* PCI Int A */ + MPP7_GPIO, /* PCI Int B */ + MPP8_UNUSED, + MPP9_UNUSED, + MPP10_UNUSED, + MPP11_UNUSED, + MPP12_SATA_LED, /* SATA 0 presence */ + MPP13_SATA_LED, /* SATA 1 presence */ + MPP14_SATA_LED, /* SATA 0 active */ + MPP15_SATA_LED, /* SATA 1 active */ + MPP16_UART, /* UART1 RXD */ + MPP17_UART, /* UART1 TXD */ + MPP18_GPIO, /* SW_RST */ + MPP19_UNUSED, + 0, }; static void __init qnap_ts209_init(void) diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c index 9eac819..5aacc7a 100644 --- a/arch/arm/mach-orion5x/ts409-setup.c +++ b/arch/arm/mach-orion5x/ts409-setup.c @@ -242,28 +242,28 @@ static struct platform_device qnap_ts409_button_device = { /***************************************************************************** * General Setup ****************************************************************************/ -static struct orion5x_mpp_mode ts409_mpp_modes[] __initdata = { - { 0, MPP_UNUSED }, - { 1, MPP_UNUSED }, - { 2, MPP_UNUSED }, - { 3, MPP_UNUSED }, - { 4, MPP_GPIO }, /* HDD 1 status */ - { 5, MPP_GPIO }, /* HDD 2 status */ - { 6, MPP_GPIO }, /* HDD 3 status */ - { 7, MPP_GPIO }, /* HDD 4 status */ - { 8, MPP_UNUSED }, - { 9, MPP_UNUSED }, - { 10, MPP_GPIO }, /* RTC int */ - { 11, MPP_UNUSED }, - { 12, MPP_UNUSED }, - { 13, MPP_UNUSED }, - { 14, MPP_GPIO }, /* SW_RST */ - { 15, MPP_GPIO }, /* USB copy button */ - { 16, MPP_UART }, /* UART1 RXD */ - { 17, MPP_UART }, /* UART1 TXD */ - { 18, MPP_UNUSED }, - { 19, MPP_UNUSED }, - { -1 }, +static unsigned int ts409_mpp_modes[] __initdata = { + MPP0_UNUSED, + MPP1_UNUSED, + MPP2_UNUSED, + MPP3_UNUSED, + MPP4_GPIO, /* HDD 1 status */ + MPP5_GPIO, /* HDD 2 status */ + MPP6_GPIO, /* HDD 3 status */ + MPP7_GPIO, /* HDD 4 status */ + MPP8_UNUSED, + MPP9_UNUSED, + MPP10_GPIO, /* RTC int */ + MPP11_UNUSED, + MPP12_UNUSED, + MPP13_UNUSED, + MPP14_GPIO, /* SW_RST */ + MPP15_GPIO, /* USB copy button */ + MPP16_UART, /* UART1 RXD */ + MPP17_UART, /* UART1 TXD */ + MPP18_UNUSED, + MPP19_UNUSED, + 0, }; static void __init qnap_ts409_init(void) diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c index edb1dd2..6b7b541 100644 --- a/arch/arm/mach-orion5x/ts78xx-setup.c +++ b/arch/arm/mach-orion5x/ts78xx-setup.c @@ -557,27 +557,27 @@ static struct kobj_attribute ts78xx_fpga_attr = /***************************************************************************** * General Setup ****************************************************************************/ -static struct orion5x_mpp_mode ts78xx_mpp_modes[] __initdata = { - { 0, MPP_UNUSED }, - { 1, MPP_GPIO }, /* JTAG Clock */ - { 2, MPP_GPIO }, /* JTAG Data In */ - { 3, MPP_GPIO }, /* Lat ECP2 256 FPGA - PB2B */ - { 4, MPP_GPIO }, /* JTAG Data Out */ - { 5, MPP_GPIO }, /* JTAG TMS */ - { 6, MPP_GPIO }, /* Lat ECP2 256 FPGA - PB31A_CLK4+ */ - { 7, MPP_GPIO }, /* Lat ECP2 256 FPGA - PB22B */ - { 8, MPP_UNUSED }, - { 9, MPP_UNUSED }, - { 10, MPP_UNUSED }, - { 11, MPP_UNUSED }, - { 12, MPP_UNUSED }, - { 13, MPP_UNUSED }, - { 14, MPP_UNUSED }, - { 15, MPP_UNUSED }, - { 16, MPP_UART }, - { 17, MPP_UART }, - { 18, MPP_UART }, - { 19, MPP_UART }, +static unsigned int ts78xx_mpp_modes[] __initdata = { + MPP0_UNUSED, + MPP1_GPIO, /* JTAG Clock */ + MPP2_GPIO, /* JTAG Data In */ + MPP3_GPIO, /* Lat ECP2 256 FPGA - PB2B */ + MPP4_GPIO, /* JTAG Data Out */ + MPP5_GPIO, /* JTAG TMS */ + MPP6_GPIO, /* Lat ECP2 256 FPGA - PB31A_CLK4+ */ + MPP7_GPIO, /* Lat ECP2 256 FPGA - PB22B */ + MPP8_UNUSED, + MPP9_UNUSED, + MPP10_UNUSED, + MPP11_UNUSED, + MPP12_UNUSED, + MPP13_UNUSED, + MPP14_UNUSED, + MPP15_UNUSED, + MPP16_UART, + MPP17_UART, + MPP18_UART, + MPP19_UART, /* * MPP[20] PCI Clock Out 1 * MPP[21] PCI Clock Out 0 @@ -586,7 +586,7 @@ static struct orion5x_mpp_mode ts78xx_mpp_modes[] __initdata = { * MPP[24] Unused * MPP[25] Unused */ - { -1 }, + 0, }; static void __init ts78xx_init(void) diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c index 4e5216b..444a1c7 100644 --- a/arch/arm/mach-orion5x/wnr854t-setup.c +++ b/arch/arm/mach-orion5x/wnr854t-setup.c @@ -24,28 +24,28 @@ #include "common.h" #include "mpp.h" -static struct orion5x_mpp_mode wnr854t_mpp_modes[] __initdata = { - { 0, MPP_GPIO }, /* Power LED green (0=on) */ - { 1, MPP_GPIO }, /* Reset Button (0=off) */ - { 2, MPP_GPIO }, /* Power LED blink (0=off) */ - { 3, MPP_GPIO }, /* WAN Status LED amber (0=off) */ - { 4, MPP_GPIO }, /* PCI int */ - { 5, MPP_GPIO }, /* ??? */ - { 6, MPP_GPIO }, /* ??? */ - { 7, MPP_GPIO }, /* ??? */ - { 8, MPP_UNUSED }, /* ??? */ - { 9, MPP_GIGE }, /* GE_RXERR */ - { 10, MPP_UNUSED }, /* ??? */ - { 11, MPP_UNUSED }, /* ??? */ - { 12, MPP_GIGE }, /* GE_TXD[4] */ - { 13, MPP_GIGE }, /* GE_TXD[5] */ - { 14, MPP_GIGE }, /* GE_TXD[6] */ - { 15, MPP_GIGE }, /* GE_TXD[7] */ - { 16, MPP_GIGE }, /* GE_RXD[4] */ - { 17, MPP_GIGE }, /* GE_RXD[5] */ - { 18, MPP_GIGE }, /* GE_RXD[6] */ - { 19, MPP_GIGE }, /* GE_RXD[7] */ - { -1 }, +static unsigned int wnr854t_mpp_modes[] __initdata = { + MPP0_GPIO, /* Power LED green (0=on) */ + MPP1_GPIO, /* Reset Button (0=off) */ + MPP2_GPIO, /* Power LED blink (0=off) */ + MPP3_GPIO, /* WAN Status LED amber (0=off) */ + MPP4_GPIO, /* PCI int */ + MPP5_GPIO, /* ??? */ + MPP6_GPIO, /* ??? */ + MPP7_GPIO, /* ??? */ + MPP8_UNUSED, /* ??? */ + MPP9_GIGE, /* GE_RXERR */ + MPP10_UNUSED, /* ??? */ + MPP11_UNUSED, /* ??? */ + MPP12_GIGE, /* GE_TXD[4] */ + MPP13_GIGE, /* GE_TXD[5] */ + MPP14_GIGE, /* GE_TXD[6] */ + MPP15_GIGE, /* GE_TXD[7] */ + MPP16_GIGE, /* GE_RXD[4] */ + MPP17_GIGE, /* GE_RXD[5] */ + MPP18_GIGE, /* GE_RXD[6] */ + MPP19_GIGE, /* GE_RXD[7] */ + 0, }; /* diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c index fab79d0..d1952be 100644 --- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c +++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c @@ -101,28 +101,28 @@ static struct platform_device wrt350n_v2_button_device = { /* * General setup */ -static struct orion5x_mpp_mode wrt350n_v2_mpp_modes[] __initdata = { - { 0, MPP_GPIO }, /* Power LED green (0=on) */ - { 1, MPP_GPIO }, /* Security LED (0=on) */ - { 2, MPP_GPIO }, /* Internal Button (0=on) */ - { 3, MPP_GPIO }, /* Reset Button (0=on) */ - { 4, MPP_GPIO }, /* PCI int */ - { 5, MPP_GPIO }, /* Power LED orange (0=on) */ - { 6, MPP_GPIO }, /* USB LED (0=on) */ - { 7, MPP_GPIO }, /* Wireless LED (0=on) */ - { 8, MPP_UNUSED }, /* ??? */ - { 9, MPP_GIGE }, /* GE_RXERR */ - { 10, MPP_UNUSED }, /* ??? */ - { 11, MPP_UNUSED }, /* ??? */ - { 12, MPP_GIGE }, /* GE_TXD[4] */ - { 13, MPP_GIGE }, /* GE_TXD[5] */ - { 14, MPP_GIGE }, /* GE_TXD[6] */ - { 15, MPP_GIGE }, /* GE_TXD[7] */ - { 16, MPP_GIGE }, /* GE_RXD[4] */ - { 17, MPP_GIGE }, /* GE_RXD[5] */ - { 18, MPP_GIGE }, /* GE_RXD[6] */ - { 19, MPP_GIGE }, /* GE_RXD[7] */ - { -1 }, +static unsigned int wrt350n_v2_mpp_modes[] __initdata = { + MPP0_GPIO, /* Power LED green (0=on) */ + MPP1_GPIO, /* Security LED (0=on) */ + MPP2_GPIO, /* Internal Button (0=on) */ + MPP3_GPIO, /* Reset Button (0=on) */ + MPP4_GPIO, /* PCI int */ + MPP5_GPIO, /* Power LED orange (0=on) */ + MPP6_GPIO, /* USB LED (0=on) */ + MPP7_GPIO, /* Wireless LED (0=on) */ + MPP8_UNUSED, /* ??? */ + MPP9_GIGE, /* GE_RXERR */ + MPP10_UNUSED, /* ??? */ + MPP11_UNUSED, /* ??? */ + MPP12_GIGE, /* GE_TXD[4] */ + MPP13_GIGE, /* GE_TXD[5] */ + MPP14_GIGE, /* GE_TXD[6] */ + MPP15_GIGE, /* GE_TXD[7] */ + MPP16_GIGE, /* GE_RXD[4] */ + MPP17_GIGE, /* GE_RXD[5] */ + MPP18_GIGE, /* GE_RXD[6] */ + MPP19_GIGE, /* GE_RXD[7] */ + 0, }; /* diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h index 759b851..5519a34 100644 --- a/arch/arm/mach-pxa/include/mach/uncompress.h +++ b/arch/arm/mach-pxa/include/mach/uncompress.h @@ -16,9 +16,9 @@ #define BTUART_BASE (0x40200000) #define STUART_BASE (0x40700000) -static unsigned long uart_base; -static unsigned int uart_shift; -static unsigned int uart_is_pxa; +unsigned long uart_base; +unsigned int uart_shift; +unsigned int uart_is_pxa; static inline unsigned char uart_read(int offset) { diff --git a/arch/arm/mach-rpc/include/mach/uncompress.h b/arch/arm/mach-rpc/include/mach/uncompress.h index 8c9e2c7..9cd9bcd 100644 --- a/arch/arm/mach-rpc/include/mach/uncompress.h +++ b/arch/arm/mach-rpc/include/mach/uncompress.h @@ -66,12 +66,12 @@ extern __attribute__((pure)) struct param_struct *params(void); #define params (params()) #ifndef STANDALONE_DEBUG -static unsigned long video_num_cols; -static unsigned long video_num_rows; -static unsigned long video_x; -static unsigned long video_y; -static unsigned char bytes_per_char_v; -static int white; +unsigned long video_num_cols; +unsigned long video_num_rows; +unsigned long video_x; +unsigned long video_y; +unsigned char bytes_per_char_v; +int white; /* * This does not append a newline diff --git a/arch/arm/mach-s3c64xx/irq.c b/arch/arm/mach-s3c64xx/irq.c index 67a145d..97660c8 100644 --- a/arch/arm/mach-s3c64xx/irq.c +++ b/arch/arm/mach-s3c64xx/irq.c @@ -58,12 +58,7 @@ void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid) vic_init(VA_VIC1, IRQ_VIC1_BASE, vic1_valid, 0); /* add the timer sub-irqs */ - - s3c_init_vic_timer_irq(IRQ_TIMER0_VIC, IRQ_TIMER0); - s3c_init_vic_timer_irq(IRQ_TIMER1_VIC, IRQ_TIMER1); - s3c_init_vic_timer_irq(IRQ_TIMER2_VIC, IRQ_TIMER2); - s3c_init_vic_timer_irq(IRQ_TIMER3_VIC, IRQ_TIMER3); - s3c_init_vic_timer_irq(IRQ_TIMER4_VIC, IRQ_TIMER4); + s3c_init_vic_timer_irq(5, IRQ_TIMER0); s3c_init_uart_irqs(uart_irqs, ARRAY_SIZE(uart_irqs)); } diff --git a/arch/arm/mach-s5p64x0/include/mach/uncompress.h b/arch/arm/mach-s5p64x0/include/mach/uncompress.h index c65b229..1608faf 100644 --- a/arch/arm/mach-s5p64x0/include/mach/uncompress.h +++ b/arch/arm/mach-s5p64x0/include/mach/uncompress.h @@ -24,8 +24,8 @@ typedef unsigned int upf_t; /* cannot include linux/serial_core.h */ /* uart setup */ -static unsigned int fifo_mask; -static unsigned int fifo_max; +unsigned int fifo_mask; +unsigned int fifo_max; /* forward declerations */ @@ -43,7 +43,7 @@ static void arch_detect_cpu(void); /* how many bytes we allow into the FIFO at a time in FIFO mode */ #define FIFO_MAX (14) -static unsigned long uart_base; +unsigned long uart_base; static __inline__ void get_uart_base(void) { diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index 1afe050..823c703 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -1,7 +1,7 @@ obj-y += common.o obj-y += devices.o obj-y += io.o -obj-y += irq.o legacy_irq.o +obj-y += irq.o obj-y += clock.o obj-y += timer.o obj-y += gpio.o diff --git a/arch/arm/mach-tegra/gpio.c b/arch/arm/mach-tegra/gpio.c index 65a1aba..919d638 100644 --- a/arch/arm/mach-tegra/gpio.c +++ b/arch/arm/mach-tegra/gpio.c @@ -24,6 +24,8 @@ #include <linux/io.h> #include <linux/gpio.h> +#include <asm/mach/irq.h> + #include <mach/iomap.h> #include <mach/suspend.h> @@ -221,8 +223,9 @@ static void tegra_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) int port; int pin; int unmasked = 0; + struct irq_chip *chip = irq_desc_get_chip(desc); - desc->irq_data.chip->irq_ack(&desc->irq_data); + chained_irq_enter(chip, desc); bank = irq_get_handler_data(irq); @@ -241,7 +244,7 @@ static void tegra_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) */ if (lvl & (0x100 << pin)) { unmasked = 1; - desc->irq_data.chip->irq_unmask(&desc->irq_data); + chained_irq_exit(chip, desc); } generic_handle_irq(gpio_to_irq(gpio + pin)); @@ -249,7 +252,7 @@ static void tegra_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) } if (!unmasked) - desc->irq_data.chip->irq_unmask(&desc->irq_data); + chained_irq_exit(chip, desc); } diff --git a/arch/arm/mach-tegra/include/mach/legacy_irq.h b/arch/arm/mach-tegra/include/mach/legacy_irq.h deleted file mode 100644 index d898c0e..0000000 --- a/arch/arm/mach-tegra/include/mach/legacy_irq.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * arch/arm/mach-tegra/include/mach/legacy_irq.h - * - * Copyright (C) 2010 Google, Inc. - * Author: Colin Cross <ccross@android.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef _ARCH_ARM_MACH_TEGRA_LEGARY_IRQ_H -#define _ARCH_ARM_MACH_TEGRA_LEGARY_IRQ_H - -void tegra_legacy_mask_irq(unsigned int irq); -void tegra_legacy_unmask_irq(unsigned int irq); -void tegra_legacy_select_fiq(unsigned int irq, bool fiq); -void tegra_legacy_force_irq_set(unsigned int irq); -void tegra_legacy_force_irq_clr(unsigned int irq); -int tegra_legacy_force_irq_status(unsigned int irq); -void tegra_legacy_select_fiq(unsigned int irq, bool fiq); -unsigned long tegra_legacy_vfiq(int nr); -unsigned long tegra_legacy_class(int nr); -int tegra_legacy_irq_set_wake(int irq, int enable); -void tegra_legacy_irq_set_lp1_wake_mask(void); -void tegra_legacy_irq_restore_mask(void); -void tegra_init_legacy_irq(void); - -#endif diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c index 4330d89..4956c3c 100644 --- a/arch/arm/mach-tegra/irq.c +++ b/arch/arm/mach-tegra/irq.c @@ -1,8 +1,8 @@ /* - * Copyright (C) 2010 Google, Inc. + * Copyright (C) 2011 Google, Inc. * * Author: - * Colin Cross <ccross@google.com> + * Colin Cross <ccross@android.com> * * Copyright (C) 2010, NVIDIA Corporation * @@ -18,8 +18,6 @@ */ #include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/init.h> #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/io.h> @@ -27,134 +25,110 @@ #include <asm/hardware/gic.h> #include <mach/iomap.h> -#include <mach/legacy_irq.h> -#include <mach/suspend.h> #include "board.h" -#define PMC_CTRL 0x0 -#define PMC_CTRL_LATCH_WAKEUPS (1 << 5) -#define PMC_WAKE_MASK 0xc -#define PMC_WAKE_LEVEL 0x10 -#define PMC_WAKE_STATUS 0x14 -#define PMC_SW_WAKE_STATUS 0x18 -#define PMC_DPD_SAMPLE 0x20 +#define INT_SYS_NR (INT_GPIO_BASE - INT_PRI_BASE) +#define INT_SYS_SZ (INT_SEC_BASE - INT_PRI_BASE) +#define PPI_NR ((INT_SYS_NR+INT_SYS_SZ-1)/INT_SYS_SZ) + +#define ICTLR_CPU_IEP_VFIQ 0x08 +#define ICTLR_CPU_IEP_FIR 0x14 +#define ICTLR_CPU_IEP_FIR_SET 0x18 +#define ICTLR_CPU_IEP_FIR_CLR 0x1c + +#define ICTLR_CPU_IER 0x20 +#define ICTLR_CPU_IER_SET 0x24 +#define ICTLR_CPU_IER_CLR 0x28 +#define ICTLR_CPU_IEP_CLASS 0x2C + +#define ICTLR_COP_IER 0x30 +#define ICTLR_COP_IER_SET 0x34 +#define ICTLR_COP_IER_CLR 0x38 +#define ICTLR_COP_IEP_CLASS 0x3c + +#define NUM_ICTLRS 4 +#define FIRST_LEGACY_IRQ 32 + +static void __iomem *ictlr_reg_base[] = { + IO_ADDRESS(TEGRA_PRIMARY_ICTLR_BASE), + IO_ADDRESS(TEGRA_SECONDARY_ICTLR_BASE), + IO_ADDRESS(TEGRA_TERTIARY_ICTLR_BASE), + IO_ADDRESS(TEGRA_QUATERNARY_ICTLR_BASE), +}; -static void __iomem *pmc = IO_ADDRESS(TEGRA_PMC_BASE); +static inline void tegra_irq_write_mask(unsigned int irq, unsigned long reg) +{ + void __iomem *base; + u32 mask; -static u32 tegra_lp0_wake_enb; -static u32 tegra_lp0_wake_level; -static u32 tegra_lp0_wake_level_any; + BUG_ON(irq < FIRST_LEGACY_IRQ || + irq >= FIRST_LEGACY_IRQ + NUM_ICTLRS * 32); -static void (*tegra_gic_mask_irq)(struct irq_data *d); -static void (*tegra_gic_unmask_irq)(struct irq_data *d); -static void (*tegra_gic_ack_irq)(struct irq_data *d); + base = ictlr_reg_base[(irq - FIRST_LEGACY_IRQ) / 32]; + mask = BIT((irq - FIRST_LEGACY_IRQ) % 32); -/* ensures that sufficient time is passed for a register write to - * serialize into the 32KHz domain */ -static void pmc_32kwritel(u32 val, unsigned long offs) -{ - writel(val, pmc + offs); - udelay(130); + __raw_writel(mask, base + reg); } -int tegra_set_lp1_wake(int irq, int enable) +static void tegra_mask(struct irq_data *d) { - return tegra_legacy_irq_set_wake(irq, enable); + if (d->irq < FIRST_LEGACY_IRQ) + return; + + tegra_irq_write_mask(d->irq, ICTLR_CPU_IER_CLR); } -void tegra_set_lp0_wake_pads(u32 wake_enb, u32 wake_level, u32 wake_any) +static void tegra_unmask(struct irq_data *d) { - u32 temp; - u32 status; - u32 lvl; - - wake_level &= wake_enb; - wake_any &= wake_enb; + if (d->irq < FIRST_LEGACY_IRQ) + return; - wake_level |= (tegra_lp0_wake_level & tegra_lp0_wake_enb); - wake_any |= (tegra_lp0_wake_level_any & tegra_lp0_wake_enb); - - wake_enb |= tegra_lp0_wake_enb; - - pmc_32kwritel(0, PMC_SW_WAKE_STATUS); - temp = readl(pmc + PMC_CTRL); - temp |= PMC_CTRL_LATCH_WAKEUPS; - pmc_32kwritel(temp, PMC_CTRL); - temp &= ~PMC_CTRL_LATCH_WAKEUPS; - pmc_32kwritel(temp, PMC_CTRL); - status = readl(pmc + PMC_SW_WAKE_STATUS); - lvl = readl(pmc + PMC_WAKE_LEVEL); - - /* flip the wakeup trigger for any-edge triggered pads - * which are currently asserting as wakeups */ - lvl ^= status; - lvl &= wake_any; - - wake_level |= lvl; - - writel(wake_level, pmc + PMC_WAKE_LEVEL); - /* Enable DPD sample to trigger sampling pads data and direction - * in which pad will be driven during lp0 mode*/ - writel(0x1, pmc + PMC_DPD_SAMPLE); - - writel(wake_enb, pmc + PMC_WAKE_MASK); + tegra_irq_write_mask(d->irq, ICTLR_CPU_IER_SET); } -static void tegra_mask(struct irq_data *d) +static void tegra_ack(struct irq_data *d) { - tegra_gic_mask_irq(d); - tegra_legacy_mask_irq(d->irq); -} + if (d->irq < FIRST_LEGACY_IRQ) + return; -static void tegra_unmask(struct irq_data *d) -{ - tegra_gic_unmask_irq(d); - tegra_legacy_unmask_irq(d->irq); + tegra_irq_write_mask(d->irq, ICTLR_CPU_IEP_FIR_CLR); } -static void tegra_ack(struct irq_data *d) +static void tegra_eoi(struct irq_data *d) { - tegra_legacy_force_irq_clr(d->irq); - tegra_gic_ack_irq(d); + if (d->irq < FIRST_LEGACY_IRQ) + return; + + tegra_irq_write_mask(d->irq, ICTLR_CPU_IEP_FIR_CLR); } static int tegra_retrigger(struct irq_data *d) { - tegra_legacy_force_irq_set(d->irq); + if (d->irq < FIRST_LEGACY_IRQ) + return 0; + + tegra_irq_write_mask(d->irq, ICTLR_CPU_IEP_FIR_SET); + return 1; } -static struct irq_chip tegra_irq = { - .name = "PPI", - .irq_ack = tegra_ack, - .irq_mask = tegra_mask, - .irq_unmask = tegra_unmask, - .irq_retrigger = tegra_retrigger, -}; - void __init tegra_init_irq(void) { - struct irq_chip *gic; - unsigned int i; - int irq; + int i; - tegra_init_legacy_irq(); + for (i = 0; i < NUM_ICTLRS; i++) { + void __iomem *ictlr = ictlr_reg_base[i]; + writel(~0, ictlr + ICTLR_CPU_IER_CLR); + writel(0, ictlr + ICTLR_CPU_IEP_CLASS); + } + + gic_arch_extn.irq_ack = tegra_ack; + gic_arch_extn.irq_eoi = tegra_eoi; + gic_arch_extn.irq_mask = tegra_mask; + gic_arch_extn.irq_unmask = tegra_unmask; + gic_arch_extn.irq_retrigger = tegra_retrigger; gic_init(0, 29, IO_ADDRESS(TEGRA_ARM_INT_DIST_BASE), IO_ADDRESS(TEGRA_ARM_PERIF_BASE + 0x100)); - - gic = irq_get_chip(29); - tegra_gic_unmask_irq = gic->irq_unmask; - tegra_gic_mask_irq = gic->irq_mask; - tegra_gic_ack_irq = gic->irq_ack; -#ifdef CONFIG_SMP - tegra_irq.irq_set_affinity = gic->irq_set_affinity; -#endif - - for (i = 0; i < INT_MAIN_NR; i++) { - irq = INT_PRI_BASE + i; - irq_set_chip_and_handler(irq, &tegra_irq, handle_level_irq); - set_irq_flags(irq, IRQF_VALID); - } } diff --git a/arch/arm/mach-tegra/legacy_irq.c b/arch/arm/mach-tegra/legacy_irq.c deleted file mode 100644 index 38eb719..0000000 --- a/arch/arm/mach-tegra/legacy_irq.c +++ /dev/null @@ -1,215 +0,0 @@ -/* - * arch/arm/mach-tegra/legacy_irq.c - * - * Copyright (C) 2010 Google, Inc. - * Author: Colin Cross <ccross@android.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/io.h> -#include <linux/kernel.h> -#include <mach/iomap.h> -#include <mach/irqs.h> -#include <mach/legacy_irq.h> - -#define INT_SYS_NR (INT_GPIO_BASE - INT_PRI_BASE) -#define INT_SYS_SZ (INT_SEC_BASE - INT_PRI_BASE) -#define PPI_NR ((INT_SYS_NR+INT_SYS_SZ-1)/INT_SYS_SZ) - -#define ICTLR_CPU_IEP_VFIQ 0x08 -#define ICTLR_CPU_IEP_FIR 0x14 -#define ICTLR_CPU_IEP_FIR_SET 0x18 -#define ICTLR_CPU_IEP_FIR_CLR 0x1c - -#define ICTLR_CPU_IER 0x20 -#define ICTLR_CPU_IER_SET 0x24 -#define ICTLR_CPU_IER_CLR 0x28 -#define ICTLR_CPU_IEP_CLASS 0x2C - -#define ICTLR_COP_IER 0x30 -#define ICTLR_COP_IER_SET 0x34 -#define ICTLR_COP_IER_CLR 0x38 -#define ICTLR_COP_IEP_CLASS 0x3c - -#define NUM_ICTLRS 4 - -static void __iomem *ictlr_reg_base[] = { - IO_ADDRESS(TEGRA_PRIMARY_ICTLR_BASE), - IO_ADDRESS(TEGRA_SECONDARY_ICTLR_BASE), - IO_ADDRESS(TEGRA_TERTIARY_ICTLR_BASE), - IO_ADDRESS(TEGRA_QUATERNARY_ICTLR_BASE), -}; - -static u32 tegra_legacy_wake_mask[4]; -static u32 tegra_legacy_saved_mask[4]; - -/* When going into deep sleep, the CPU is powered down, taking the GIC with it - In order to wake, the wake interrupts need to be enabled in the legacy - interrupt controller. */ -void tegra_legacy_unmask_irq(unsigned int irq) -{ - void __iomem *base; - pr_debug("%s: %d\n", __func__, irq); - - irq -= 32; - base = ictlr_reg_base[irq>>5]; - writel(1 << (irq & 31), base + ICTLR_CPU_IER_SET); -} - -void tegra_legacy_mask_irq(unsigned int irq) -{ - void __iomem *base; - pr_debug("%s: %d\n", __func__, irq); - - irq -= 32; - base = ictlr_reg_base[irq>>5]; - writel(1 << (irq & 31), base + ICTLR_CPU_IER_CLR); -} - -void tegra_legacy_force_irq_set(unsigned int irq) -{ - void __iomem *base; - pr_debug("%s: %d\n", __func__, irq); - - irq -= 32; - base = ictlr_reg_base[irq>>5]; - writel(1 << (irq & 31), base + ICTLR_CPU_IEP_FIR_SET); -} - -void tegra_legacy_force_irq_clr(unsigned int irq) -{ - void __iomem *base; - pr_debug("%s: %d\n", __func__, irq); - - irq -= 32; - base = ictlr_reg_base[irq>>5]; - writel(1 << (irq & 31), base + ICTLR_CPU_IEP_FIR_CLR); -} - -int tegra_legacy_force_irq_status(unsigned int irq) -{ - void __iomem *base; - pr_debug("%s: %d\n", __func__, irq); - - irq -= 32; - base = ictlr_reg_base[irq>>5]; - return !!(readl(base + ICTLR_CPU_IEP_FIR) & (1 << (irq & 31))); -} - -void tegra_legacy_select_fiq(unsigned int irq, bool fiq) -{ - void __iomem *base; - pr_debug("%s: %d\n", __func__, irq); - - irq -= 32; - base = ictlr_reg_base[irq>>5]; - writel(fiq << (irq & 31), base + ICTLR_CPU_IEP_CLASS); -} - -unsigned long tegra_legacy_vfiq(int nr) -{ - void __iomem *base; - base = ictlr_reg_base[nr]; - return readl(base + ICTLR_CPU_IEP_VFIQ); -} - -unsigned long tegra_legacy_class(int nr) -{ - void __iomem *base; - base = ictlr_reg_base[nr]; - return readl(base + ICTLR_CPU_IEP_CLASS); -} - -int tegra_legacy_irq_set_wake(int irq, int enable) -{ - irq -= 32; - if (enable) - tegra_legacy_wake_mask[irq >> 5] |= 1 << (irq & 31); - else - tegra_legacy_wake_mask[irq >> 5] &= ~(1 << (irq & 31)); - - return 0; -} - -void tegra_legacy_irq_set_lp1_wake_mask(void) -{ - void __iomem *base; - int i; - - for (i = 0; i < NUM_ICTLRS; i++) { - base = ictlr_reg_base[i]; - tegra_legacy_saved_mask[i] = readl(base + ICTLR_CPU_IER); - writel(tegra_legacy_wake_mask[i], base + ICTLR_CPU_IER); - } -} - -void tegra_legacy_irq_restore_mask(void) -{ - void __iomem *base; - int i; - - for (i = 0; i < NUM_ICTLRS; i++) { - base = ictlr_reg_base[i]; - writel(tegra_legacy_saved_mask[i], base + ICTLR_CPU_IER); - } -} - -void tegra_init_legacy_irq(void) -{ - int i; - - for (i = 0; i < NUM_ICTLRS; i++) { - void __iomem *ictlr = ictlr_reg_base[i]; - writel(~0, ictlr + ICTLR_CPU_IER_CLR); - writel(0, ictlr + ICTLR_CPU_IEP_CLASS); - } -} - -#ifdef CONFIG_PM -static u32 cop_ier[NUM_ICTLRS]; -static u32 cpu_ier[NUM_ICTLRS]; -static u32 cpu_iep[NUM_ICTLRS]; - -void tegra_irq_suspend(void) -{ - unsigned long flags; - int i; - - local_irq_save(flags); - for (i = 0; i < NUM_ICTLRS; i++) { - void __iomem *ictlr = ictlr_reg_base[i]; - cpu_ier[i] = readl(ictlr + ICTLR_CPU_IER); - cpu_iep[i] = readl(ictlr + ICTLR_CPU_IEP_CLASS); - cop_ier[i] = readl(ictlr + ICTLR_COP_IER); - writel(~0, ictlr + ICTLR_COP_IER_CLR); - } - local_irq_restore(flags); -} - -void tegra_irq_resume(void) -{ - unsigned long flags; - int i; - - local_irq_save(flags); - for (i = 0; i < NUM_ICTLRS; i++) { - void __iomem *ictlr = ictlr_reg_base[i]; - writel(cpu_iep[i], ictlr + ICTLR_CPU_IEP_CLASS); - writel(~0ul, ictlr + ICTLR_CPU_IER_CLR); - writel(cpu_ier[i], ictlr + ICTLR_CPU_IER_SET); - writel(0, ictlr + ICTLR_COP_IEP_CLASS); - writel(~0ul, ictlr + ICTLR_COP_IER_CLR); - writel(cop_ier[i], ictlr + ICTLR_COP_IER_SET); - } - local_irq_restore(flags); -} -#endif diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h index ab0fe14..088b550 100644 --- a/arch/arm/mach-ux500/include/mach/uncompress.h +++ b/arch/arm/mach-ux500/include/mach/uncompress.h @@ -24,7 +24,7 @@ #include <linux/amba/serial.h> #include <mach/hardware.h> -static u32 ux500_uart_base; +u32 ux500_uart_base; static void putc(const char c) { diff --git a/arch/arm/mach-w90x900/include/mach/uncompress.h b/arch/arm/mach-w90x900/include/mach/uncompress.h index 56f1a74..0313021 100644 --- a/arch/arm/mach-w90x900/include/mach/uncompress.h +++ b/arch/arm/mach-w90x900/include/mach/uncompress.h @@ -27,7 +27,7 @@ #define arch_decomp_wdog() #define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE) -static volatile u32 * uart_base = (u32 *)UART0_PA; +static volatile u32 * const uart_base = (u32 *)UART0_PA; static void putc(int ch) { diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 7c99cb4..ab17cc0 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -175,11 +175,6 @@ cpu_v6_name: .asciz "ARMv6-compatible processor" .size cpu_v6_name, . - cpu_v6_name - .type cpu_pj4_name, #object -cpu_pj4_name: - .asciz "Marvell PJ4 processor" - .size cpu_pj4_name, . - cpu_pj4_name - .align __CPUINIT @@ -305,32 +300,3 @@ __v6_proc_info: .long v6_user_fns .long v6_cache_fns .size __v6_proc_info, . - __v6_proc_info - - .type __pj4_v6_proc_info, #object -__pj4_v6_proc_info: - .long 0x560f5810 - .long 0xff0ffff0 - ALT_SMP(.long \ - PMD_TYPE_SECT | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ | \ - PMD_FLAGS_SMP) - ALT_UP(.long \ - PMD_TYPE_SECT | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ | \ - PMD_FLAGS_UP) - .long PMD_TYPE_SECT | \ - PMD_SECT_XN | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - b __v6_setup - .long cpu_arch_name - .long cpu_elf_name - .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS - .long cpu_pj4_name - .long v6_processor_functions - .long v6wbi_tlb_fns - .long v6_user_fns - .long v6_cache_fns - .size __pj4_v6_proc_info, . - __pj4_v6_proc_info diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index b0cb425..a5353fc 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -4,13 +4,18 @@ source "arch/arm/plat-mxc/devices/Kconfig" menu "Freescale MXC Implementations" +config ARCH_MX50_SUPPORTED + bool + +config ARCH_MX53_SUPPORTED + bool + choice prompt "Freescale CPU family:" default ARCH_MX3 config ARCH_MX1 bool "MX1-based" - select SOC_IMX1 help This enables support for systems based on the Freescale i.MX1 family @@ -26,29 +31,26 @@ config ARCH_MX25 config ARCH_MX3 bool "MX3-based" - select CPU_V6 help This enables support for systems based on the Freescale i.MX3 family -config ARCH_MXC91231 - bool "MXC91231-based" - select CPU_V6 - select MXC_AVIC +config ARCH_MX503 + bool "i.MX50 + i.MX53" + select ARCH_MX50_SUPPORTED + select ARCH_MX53_SUPPORTED help - This enables support for systems based on the Freescale MXC91231 family + This enables support for machines using Freescale's i.MX50 and i.MX51 + processors. -config ARCH_MX5 - bool "MX5-based" - select CPU_V7 - select ARM_L1_CACHE_SHIFT_6 +config ARCH_MX51 + bool "i.MX51" + select ARCH_MX51_SUPPORTED help This enables support for systems based on the Freescale i.MX51 family endchoice source "arch/arm/mach-imx/Kconfig" -source "arch/arm/mach-mx3/Kconfig" -source "arch/arm/mach-mxc91231/Kconfig" source "arch/arm/mach-mx5/Kconfig" endmenu diff --git a/arch/arm/plat-mxc/devices/Kconfig b/arch/arm/plat-mxc/devices/Kconfig index b9ab1d5..bd294ad 100644 --- a/arch/arm/plat-mxc/devices/Kconfig +++ b/arch/arm/plat-mxc/devices/Kconfig @@ -24,7 +24,6 @@ config IMX_HAVE_PLATFORM_IMXDI_RTC config IMX_HAVE_PLATFORM_IMX_FB bool - select HAVE_FB_IMX config IMX_HAVE_PLATFORM_IMX_I2C bool @@ -41,6 +40,9 @@ config IMX_HAVE_PLATFORM_IMX_UART config IMX_HAVE_PLATFORM_IMX_UDC bool +config IMX_HAVE_PLATFORM_IPU_CORE + bool + config IMX_HAVE_PLATFORM_MX1_CAMERA bool @@ -63,6 +65,9 @@ config IMX_HAVE_PLATFORM_MXC_RNGA bool select ARCH_HAS_RNGA +config IMX_HAVE_PLATFORM_MXC_RTC + bool + config IMX_HAVE_PLATFORM_MXC_W1 bool diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/plat-mxc/devices/Makefile index 75cd2ec..ad2922a 100644 --- a/arch/arm/plat-mxc/devices/Makefile +++ b/arch/arm/plat-mxc/devices/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_KEYPAD) += platform-imx-keypad.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_SSI) += platform-imx-ssi.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UART) += platform-imx-uart.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UDC) += platform-imx_udc.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_IPU_CORE) += platform-ipu-core.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MX1_CAMERA) += platform-mx1-camera.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_CAMERA) += platform-mx2-camera.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_EHCI) += platform-mxc-ehci.o @@ -19,6 +20,7 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_MMC) += platform-mxc-mmc.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_NAND) += platform-mxc_nand.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_PWM) += platform-mxc_pwm.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RNGA) += platform-mxc_rnga.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RTC) += platform-mxc_rtc.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) += platform-spi_imx.o diff --git a/arch/arm/plat-mxc/devices/platform-ipu-core.c b/arch/arm/plat-mxc/devices/platform-ipu-core.c new file mode 100644 index 0000000..edf6503 --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-ipu-core.c @@ -0,0 +1,129 @@ +/* + * Copyright (C) 2011 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/hardware.h> +#include <mach/devices-common.h> + +#define imx_ipu_core_entry_single(soc) \ +{ \ + .iobase = soc ## _IPU_CTRL_BASE_ADDR, \ + .synirq = soc ## _INT_IPU_SYN, \ + .errirq = soc ## _INT_IPU_ERR, \ +} + +#ifdef CONFIG_SOC_IMX31 +const struct imx_ipu_core_data imx31_ipu_core_data __initconst = + imx_ipu_core_entry_single(MX31); +#endif + +#ifdef CONFIG_SOC_IMX35 +const struct imx_ipu_core_data imx35_ipu_core_data __initconst = + imx_ipu_core_entry_single(MX35); +#endif + +static struct platform_device *imx_ipu_coredev __initdata; + +struct platform_device *__init imx_add_ipu_core( + const struct imx_ipu_core_data *data, + const struct ipu_platform_data *pdata) +{ + /* The resource order is important! */ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + 0x5f, + .flags = IORESOURCE_MEM, + }, { + .start = data->iobase + 0x88, + .end = data->iobase + 0xb3, + .flags = IORESOURCE_MEM, + }, { + .start = data->synirq, + .end = data->synirq, + .flags = IORESOURCE_IRQ, + }, { + .start = data->errirq, + .end = data->errirq, + .flags = IORESOURCE_IRQ, + }, + }; + + return imx_ipu_coredev = imx_add_platform_device("ipu-core", -1, + res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); +} + +struct platform_device *__init imx_alloc_mx3_camera( + const struct imx_ipu_core_data *data, + const struct mx3_camera_pdata *pdata) +{ + struct resource res[] = { + { + .start = data->iobase + 0x60, + .end = data->iobase + 0x87, + .flags = IORESOURCE_MEM, + }, + }; + int ret = -ENOMEM; + struct platform_device *pdev; + + if (IS_ERR_OR_NULL(imx_ipu_coredev)) + return ERR_PTR(-ENODEV); + + pdev = platform_device_alloc("mx3-camera", 0); + if (!pdev) + goto err; + + pdev->dev.dma_mask = kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL); + if (!pdev->dev.dma_mask) + goto err; + + *pdev->dev.dma_mask = DMA_BIT_MASK(32); + pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + + ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res)); + if (ret) + goto err; + + if (pdata) { + struct mx3_camera_pdata *copied_pdata; + + ret = platform_device_add_data(pdev, pdata, sizeof(*pdata)); + if (ret) { +err: + kfree(pdev->dev.dma_mask); + platform_device_put(pdev); + return ERR_PTR(-ENODEV); + } + copied_pdata = dev_get_platdata(&pdev->dev); + copied_pdata->dma_dev = &imx_ipu_coredev->dev; + } + + return pdev; +} + +struct platform_device *__init imx_add_mx3_sdc_fb( + const struct imx_ipu_core_data *data, + struct mx3fb_platform_data *pdata) +{ + struct resource res[] = { + { + .start = data->iobase + 0xb4, + .end = data->iobase + 0x1bf, + .flags = IORESOURCE_MEM, + }, + }; + + if (IS_ERR_OR_NULL(imx_ipu_coredev)) + return ERR_PTR(-ENODEV); + + pdata->dma_dev = &imx_ipu_coredev->dev; + + return imx_add_platform_device_dmamask("mx3_sdc_fb", -1, + res, ARRAY_SIZE(res), pdata, sizeof(*pdata), + DMA_BIT_MASK(32)); +} diff --git a/arch/arm/plat-mxc/devices/platform-mxc_rtc.c b/arch/arm/plat-mxc/devices/platform-mxc_rtc.c new file mode 100644 index 0000000..16d0ec4 --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-mxc_rtc.c @@ -0,0 +1,40 @@ +/* + * Copyright (C) 2010-2011 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/hardware.h> +#include <mach/devices-common.h> + +#define imx_mxc_rtc_data_entry_single(soc) \ + { \ + .iobase = soc ## _RTC_BASE_ADDR, \ + .irq = soc ## _INT_RTC, \ + } + +#ifdef CONFIG_SOC_IMX31 +const struct imx_mxc_rtc_data imx31_mxc_rtc_data __initconst = + imx_mxc_rtc_data_entry_single(MX31); +#endif /* ifdef CONFIG_SOC_IMX31 */ + +struct platform_device *__init imx_add_mxc_rtc( + const struct imx_mxc_rtc_data *data) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + + return imx_add_platform_device("mxc_rtc", -1, + res, ARRAY_SIZE(res), NULL, 0); +} diff --git a/arch/arm/plat-mxc/devices/platform-spi_imx.c b/arch/arm/plat-mxc/devices/platform-spi_imx.c index f4a60ab..f97eb36 100644 --- a/arch/arm/plat-mxc/devices/platform-spi_imx.c +++ b/arch/arm/plat-mxc/devices/platform-spi_imx.c @@ -80,7 +80,7 @@ const struct imx_spi_imx_data imx35_cspi_data[] __initconst = { #ifdef CONFIG_SOC_IMX51 const struct imx_spi_imx_data imx51_cspi_data __initconst = - imx_spi_imx_data_entry_single(MX51, CSPI, "imx51-cspi", 0, , SZ_4K); + imx_spi_imx_data_entry_single(MX51, CSPI, "imx51-cspi", 2, , SZ_4K); const struct imx_spi_imx_data imx51_ecspi_data[] __initconst = { #define imx51_ecspi_data_entry(_id, _hwid) \ diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index a22ebe1..da79918 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -23,7 +23,6 @@ extern void mx35_map_io(void); extern void mx50_map_io(void); extern void mx51_map_io(void); extern void mx53_map_io(void); -extern void mxc91231_map_io(void); extern void imx1_init_early(void); extern void imx21_init_early(void); extern void imx25_init_early(void); @@ -33,7 +32,6 @@ extern void imx35_init_early(void); extern void imx50_init_early(void); extern void imx51_init_early(void); extern void imx53_init_early(void); -extern void mxc91231_init_early(void); extern void mxc_init_irq(void __iomem *); extern void tzic_init_irq(void __iomem *); extern void mx1_init_irq(void); @@ -45,7 +43,6 @@ extern void mx35_init_irq(void); extern void mx50_init_irq(void); extern void mx51_init_irq(void); extern void mx53_init_irq(void); -extern void mxc91231_init_irq(void); extern void epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq); extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int); extern int mx1_clocks_init(unsigned long fref); @@ -58,14 +55,11 @@ extern int mx51_clocks_init(unsigned long ckil, unsigned long osc, unsigned long ckih1, unsigned long ckih2); extern int mx53_clocks_init(unsigned long ckil, unsigned long osc, unsigned long ckih1, unsigned long ckih2); -extern int mxc91231_clocks_init(unsigned long fref); extern int mxc_register_gpios(void); extern int mxc_register_device(struct platform_device *pdev, void *data); extern void mxc_set_cpu_type(unsigned int type); extern void mxc_arch_reset_init(void __iomem *); -extern void mxc91231_power_off(void); -extern void mxc91231_arch_reset(int, const char *); -extern void mxc91231_prepare_idle(void); extern void mx51_efikamx_reset(void); extern int mx53_revision(void); +extern int mx53_display_revision(void); #endif diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S index 3b3a37c..8e8d175 100644 --- a/arch/arm/plat-mxc/include/mach/debug-macro.S +++ b/arch/arm/plat-mxc/include/mach/debug-macro.S @@ -44,13 +44,6 @@ #define UART_PADDR MX51_UART1_BASE_ADDR #endif -#ifdef CONFIG_ARCH_MXC91231 -#ifdef UART_PADDR -#error "CONFIG_DEBUG_LL is incompatible with multiple archs" -#endif -#define UART_PADDR MXC91231_UART2_BASE_ADDR -#endif - #define UART_VADDR IMX_IO_ADDRESS(UART_PADDR) .macro addruart, rp, rv diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h index 8658c9c..fa84773 100644 --- a/arch/arm/plat-mxc/include/mach/devices-common.h +++ b/arch/arm/plat-mxc/include/mach/devices-common.h @@ -166,6 +166,24 @@ struct platform_device *__init imx_add_imx_udc( const struct imx_imx_udc_data *data, const struct imxusb_platform_data *pdata); +#include <mach/ipu.h> +#include <mach/mx3fb.h> +#include <mach/mx3_camera.h> +struct imx_ipu_core_data { + resource_size_t iobase; + resource_size_t synirq; + resource_size_t errirq; +}; +struct platform_device *__init imx_add_ipu_core( + const struct imx_ipu_core_data *data, + const struct ipu_platform_data *pdata); +struct platform_device *__init imx_alloc_mx3_camera( + const struct imx_ipu_core_data *data, + const struct mx3_camera_pdata *pdata); +struct platform_device *__init imx_add_mx3_sdc_fb( + const struct imx_ipu_core_data *data, + struct mx3fb_platform_data *pdata); + #include <mach/mx1_camera.h> struct imx_mx1_camera_data { resource_size_t iobase; @@ -237,6 +255,15 @@ struct imx_mxc_pwm_data { struct platform_device *__init imx_add_mxc_pwm( const struct imx_mxc_pwm_data *data); +/* mxc_rtc */ +struct imx_mxc_rtc_data { + resource_size_t iobase; + resource_size_t irq; +}; +struct platform_device *__init imx_add_mxc_rtc( + const struct imx_mxc_rtc_data *data); + +/* mxc_w1 */ struct imx_mxc_w1_data { resource_size_t iobase; }; diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h index 26bb1ba..67d3e2b 100644 --- a/arch/arm/plat-mxc/include/mach/hardware.h +++ b/arch/arm/plat-mxc/include/mach/hardware.h @@ -86,15 +86,6 @@ * SPBA0 0x70000000+0x100000 -> 0xf5400000+0x100000 * AIPS1 0x73f00000+0x100000 -> 0xf5700000+0x100000 * AIPS2 0x83f00000+0x100000 -> 0xf4300000+0x100000 - * mxc91231: - * L2CC 0x30000000+0x010000 -> 0xf4400000+0x010000 - * X_MEMC 0xb8000000+0x010000 -> 0xf4c00000+0x010000 - * ROMP 0x60000000+0x010000 -> 0xf5000000+0x010000 - * AVIC 0x68000000+0x010000 -> 0xf5800000+0x010000 - * AIPS1 0x43f00000+0x100000 -> 0xf5300000+0x100000 - * SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000 - * SPBA1 0x52000000+0x100000 -> 0xf5600000+0x100000 - * AIPS2 0x53f00000+0x100000 -> 0xf5700000+0x100000 */ #define IMX_IO_P2V(x) ( \ 0xf4000000 + \ @@ -104,6 +95,8 @@ #define IMX_IO_ADDRESS(x) IOMEM(IMX_IO_P2V(x)) +#include <mach/mxc.h> + #ifdef CONFIG_ARCH_MX5 #include <mach/mx50.h> #include <mach/mx51.h> @@ -134,12 +127,6 @@ # include <mach/mx25.h> #endif -#ifdef CONFIG_ARCH_MXC91231 -# include <mach/mxc91231.h> -#endif - -#include <mach/mxc.h> - #define imx_map_entry(soc, name, _type) { \ .virtual = soc ## _IO_P2V(soc ## _ ## name ## _BASE_ADDR), \ .pfn = __phys_to_pfn(soc ## _ ## name ## _BASE_ADDR), \ diff --git a/arch/arm/plat-mxc/include/mach/io.h b/arch/arm/plat-mxc/include/mach/io.h index b4f2de7..4347a87 100644 --- a/arch/arm/plat-mxc/include/mach/io.h +++ b/arch/arm/plat-mxc/include/mach/io.h @@ -14,19 +14,26 @@ /* Allow IO space to be anywhere in the memory */ #define IO_SPACE_LIMIT 0xffffffff -#ifdef CONFIG_ARCH_MX3 -#define __arch_ioremap __mx3_ioremap +#if defined(CONFIG_SOC_IMX31) || defined(CONFIG_SOC_IMX35) +#include <mach/hardware.h> + +#define __arch_ioremap __imx_ioremap #define __arch_iounmap __iounmap +#define addr_in_module(addr, mod) \ + ((unsigned long)(addr) - mod ## _BASE_ADDR < mod ## _SIZE) + static inline void __iomem * -__mx3_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype) +__imx_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype) { - if (mtype == MT_DEVICE) { - /* Access all peripherals below 0x80000000 as nonshared device - * but leave l2cc alone. + if (mtype == MT_DEVICE && (cpu_is_mx31() || cpu_is_mx35())) { + /* + * Access all peripherals below 0x80000000 as nonshared device + * on mx3, but leave l2cc alone. Otherwise cache corruptions + * can occur. */ - if ((phys_addr < 0x80000000) && ((phys_addr < 0x30000000) || - (phys_addr >= 0x30000000 + SZ_1M))) + if (phys_addr < 0x80000000 && + !addr_in_module(phys_addr, MX3x_L2CC)) mtype = MT_DEVICE_NONSHARED; } diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx25.h b/arch/arm/plat-mxc/include/mach/iomux-mx25.h index d7f52c9..2e5244d 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx25.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx25.h @@ -89,13 +89,16 @@ #define MX25_PAD_CS0__GPIO_4_2 IOMUX_PAD(0x000, 0x04c, 0x05, 0, 0, NO_PAD_CTRL) #define MX25_PAD_CS1__CS1 IOMUX_PAD(0x000, 0x050, 0x00, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CS1__NF_CE3 IOMUX_PAD(0x000, 0x050, 0x01, 0, 0, NO_PAD_CTRL) #define MX25_PAD_CS1__GPIO_4_3 IOMUX_PAD(0x000, 0x050, 0x05, 0, 0, NO_PAD_CTRL) #define MX25_PAD_CS4__CS4 IOMUX_PAD(0x264, 0x054, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CS4__NF_CE1 IOMUX_PAD(0x264, 0x054, 0x01, 0, 0, NO_PAD_CTRL) #define MX25_PAD_CS4__UART5_CTS IOMUX_PAD(0x264, 0x054, 0x13, 0, 0, NO_PAD_CTRL) #define MX25_PAD_CS4__GPIO_3_20 IOMUX_PAD(0x264, 0x054, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_CS5__CS5 IOMUX_PAD(0x268, 0x058, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CS5__NF_CE2 IOMUX_PAD(0x268, 0x058, 0x01, 0, 0, NO_PAD_CTRL) #define MX25_PAD_CS5__UART5_RTS IOMUX_PAD(0x268, 0x058, 0x13, 0x574, 0, NO_PAD_CTRL) #define MX25_PAD_CS5__GPIO_3_21 IOMUX_PAD(0x268, 0x058, 0x15, 0, 0, NO_PAD_CTRL) diff --git a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h deleted file mode 100644 index bf28df0..0000000 --- a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h +++ /dev/null @@ -1,283 +0,0 @@ -/* - * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> - * Copyright (C) 2009 by Dmitriy Taychenachev <dimichxp@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __MACH_IOMUX_MXC91231_H__ -#define __MACH_IOMUX_MXC91231_H__ - -/* - * various IOMUX output functions - */ - -#define IOMUX_OCONFIG_GPIO (0 << 4) /* used as GPIO */ -#define IOMUX_OCONFIG_FUNC (1 << 4) /* used as function */ -#define IOMUX_OCONFIG_ALT1 (2 << 4) /* used as alternate function 1 */ -#define IOMUX_OCONFIG_ALT2 (3 << 4) /* used as alternate function 2 */ -#define IOMUX_OCONFIG_ALT3 (4 << 4) /* used as alternate function 3 */ -#define IOMUX_OCONFIG_ALT4 (5 << 4) /* used as alternate function 4 */ -#define IOMUX_OCONFIG_ALT5 (6 << 4) /* used as alternate function 5 */ -#define IOMUX_OCONFIG_ALT6 (7 << 4) /* used as alternate function 6 */ -#define IOMUX_ICONFIG_NONE 0 /* not configured for input */ -#define IOMUX_ICONFIG_GPIO 1 /* used as GPIO */ -#define IOMUX_ICONFIG_FUNC 2 /* used as function */ -#define IOMUX_ICONFIG_ALT1 4 /* used as alternate function 1 */ -#define IOMUX_ICONFIG_ALT2 8 /* used as alternate function 2 */ - -#define IOMUX_CONFIG_GPIO (IOMUX_OCONFIG_GPIO | IOMUX_ICONFIG_GPIO) -#define IOMUX_CONFIG_FUNC (IOMUX_OCONFIG_FUNC | IOMUX_ICONFIG_FUNC) -#define IOMUX_CONFIG_ALT1 (IOMUX_OCONFIG_ALT1 | IOMUX_ICONFIG_ALT1) -#define IOMUX_CONFIG_ALT2 (IOMUX_OCONFIG_ALT2 | IOMUX_ICONFIG_ALT2) - -/* - * setups a single pin: - * - reserves the pin so that it is not claimed by another driver - * - setups the iomux according to the configuration - * - if the pin is configured as a GPIO, we claim it through kernel gpiolib - */ -int mxc_iomux_alloc_pin(unsigned int pin_mode, const char *label); -/* - * setups mutliple pins - * convenient way to call the above function with tables - */ -int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count, - const char *label); - -/* - * releases a single pin: - * - make it available for a future use by another driver - * - frees the GPIO if the pin was configured as GPIO - * - DOES NOT reconfigure the IOMUX in its reset state - */ -void mxc_iomux_release_pin(unsigned int pin_mode); -/* - * releases multiple pins - * convenvient way to call the above function with tables - */ -void mxc_iomux_release_multiple_pins(const unsigned int *pin_list, int count); - -#define MUX_SIDE_AP (0) -#define MUX_SIDE_SP (1) - -#define MUX_SIDE_SHIFT (26) -#define MUX_SIDE_MASK (0x1 << MUX_SIDE_SHIFT) - -#define MUX_GPIO_PORT_SHIFT (23) -#define MUX_GPIO_PORT_MASK (0x7 << MUX_GPIO_PORT_SHIFT) - -#define MUX_GPIO_PIN_SHIFT (20) -#define MUX_GPIO_PIN_MASK (0x1f << MUX_GPIO_PIN_SHIFT) - -#define MUX_REG_SHIFT (15) -#define MUX_REG_MASK (0x1f << MUX_REG_SHIFT) - -#define MUX_FIELD_SHIFT (13) -#define MUX_FIELD_MASK (0x3 << MUX_FIELD_SHIFT) - -#define MUX_PADGRP_SHIFT (8) -#define MUX_PADGRP_MASK (0x1f << MUX_PADGRP_SHIFT) - -#define MUX_PIN_MASK (0xffffff << 8) - -#define GPIO_PORT_MAX (3) - -#define IOMUX_PIN(side, gport, gpin, ctlreg, ctlfield, padgrp) \ - (((side) << MUX_SIDE_SHIFT) | \ - (gport << MUX_GPIO_PORT_SHIFT) | \ - ((gpin) << MUX_GPIO_PIN_SHIFT) | \ - ((ctlreg) << MUX_REG_SHIFT) | \ - ((ctlfield) << MUX_FIELD_SHIFT) | \ - ((padgrp) << MUX_PADGRP_SHIFT)) - -#define MUX_MODE_OUT_SHIFT (4) -#define MUX_MODE_IN_SHIFT (0) -#define MUX_MODE_SHIFT (0) -#define MUX_MODE_MASK (0xff << MUX_MODE_SHIFT) - -#define IOMUX_MODE(pin, mode) \ - (pin | (mode << MUX_MODE_SHIFT)) - -enum iomux_pins { - /* AP Side pins */ - MXC91231_PIN_AP_CLE = IOMUX_PIN(0, 0, 0, 0, 0, 24), - MXC91231_PIN_AP_ALE = IOMUX_PIN(0, 0, 1, 0, 1, 24), - MXC91231_PIN_AP_CE_B = IOMUX_PIN(0, 0, 2, 0, 2, 24), - MXC91231_PIN_AP_RE_B = IOMUX_PIN(0, 0, 3, 0, 3, 24), - MXC91231_PIN_AP_WE_B = IOMUX_PIN(0, 0, 4, 1, 0, 24), - MXC91231_PIN_AP_WP_B = IOMUX_PIN(0, 0, 5, 1, 1, 24), - MXC91231_PIN_AP_BSY_B = IOMUX_PIN(0, 0, 6, 1, 2, 24), - MXC91231_PIN_AP_U1_TXD = IOMUX_PIN(0, 0, 7, 1, 3, 28), - MXC91231_PIN_AP_U1_RXD = IOMUX_PIN(0, 0, 8, 2, 0, 28), - MXC91231_PIN_AP_U1_RTS_B = IOMUX_PIN(0, 0, 9, 2, 1, 28), - MXC91231_PIN_AP_U1_CTS_B = IOMUX_PIN(0, 0, 10, 2, 2, 28), - MXC91231_PIN_AP_AD1_TXD = IOMUX_PIN(0, 0, 11, 2, 3, 9), - MXC91231_PIN_AP_AD1_RXD = IOMUX_PIN(0, 0, 12, 3, 0, 9), - MXC91231_PIN_AP_AD1_TXC = IOMUX_PIN(0, 0, 13, 3, 1, 9), - MXC91231_PIN_AP_AD1_TXFS = IOMUX_PIN(0, 0, 14, 3, 2, 9), - MXC91231_PIN_AP_AD2_TXD = IOMUX_PIN(0, 0, 15, 3, 3, 9), - MXC91231_PIN_AP_AD2_RXD = IOMUX_PIN(0, 0, 16, 4, 0, 9), - MXC91231_PIN_AP_AD2_TXC = IOMUX_PIN(0, 0, 17, 4, 1, 9), - MXC91231_PIN_AP_AD2_TXFS = IOMUX_PIN(0, 0, 18, 4, 2, 9), - MXC91231_PIN_AP_OWDAT = IOMUX_PIN(0, 0, 19, 4, 3, 28), - MXC91231_PIN_AP_IPU_LD17 = IOMUX_PIN(0, 0, 20, 5, 0, 28), - MXC91231_PIN_AP_IPU_D3_VSYNC = IOMUX_PIN(0, 0, 21, 5, 1, 28), - MXC91231_PIN_AP_IPU_D3_HSYNC = IOMUX_PIN(0, 0, 22, 5, 2, 28), - MXC91231_PIN_AP_IPU_D3_CLK = IOMUX_PIN(0, 0, 23, 5, 3, 28), - MXC91231_PIN_AP_IPU_D3_DRDY = IOMUX_PIN(0, 0, 24, 6, 0, 28), - MXC91231_PIN_AP_IPU_D3_CONTR = IOMUX_PIN(0, 0, 25, 6, 1, 28), - MXC91231_PIN_AP_IPU_D0_CS = IOMUX_PIN(0, 0, 26, 6, 2, 28), - MXC91231_PIN_AP_IPU_LD16 = IOMUX_PIN(0, 0, 27, 6, 3, 28), - MXC91231_PIN_AP_IPU_D2_CS = IOMUX_PIN(0, 0, 28, 7, 0, 28), - MXC91231_PIN_AP_IPU_PAR_RS = IOMUX_PIN(0, 0, 29, 7, 1, 28), - MXC91231_PIN_AP_IPU_D3_PS = IOMUX_PIN(0, 0, 30, 7, 2, 28), - MXC91231_PIN_AP_IPU_D3_CLS = IOMUX_PIN(0, 0, 31, 7, 3, 28), - MXC91231_PIN_AP_IPU_RD = IOMUX_PIN(0, 1, 0, 8, 0, 28), - MXC91231_PIN_AP_IPU_WR = IOMUX_PIN(0, 1, 1, 8, 1, 28), - MXC91231_PIN_AP_IPU_LD0 = IOMUX_PIN(0, 7, 0, 8, 2, 28), - MXC91231_PIN_AP_IPU_LD1 = IOMUX_PIN(0, 7, 0, 8, 3, 28), - MXC91231_PIN_AP_IPU_LD2 = IOMUX_PIN(0, 7, 0, 9, 0, 28), - MXC91231_PIN_AP_IPU_LD3 = IOMUX_PIN(0, 1, 2, 9, 1, 28), - MXC91231_PIN_AP_IPU_LD4 = IOMUX_PIN(0, 1, 3, 9, 2, 28), - MXC91231_PIN_AP_IPU_LD5 = IOMUX_PIN(0, 1, 4, 9, 3, 28), - MXC91231_PIN_AP_IPU_LD6 = IOMUX_PIN(0, 1, 5, 10, 0, 28), - MXC91231_PIN_AP_IPU_LD7 = IOMUX_PIN(0, 1, 6, 10, 1, 28), - MXC91231_PIN_AP_IPU_LD8 = IOMUX_PIN(0, 1, 7, 10, 2, 28), - MXC91231_PIN_AP_IPU_LD9 = IOMUX_PIN(0, 1, 8, 10, 3, 28), - MXC91231_PIN_AP_IPU_LD10 = IOMUX_PIN(0, 1, 9, 11, 0, 28), - MXC91231_PIN_AP_IPU_LD11 = IOMUX_PIN(0, 1, 10, 11, 1, 28), - MXC91231_PIN_AP_IPU_LD12 = IOMUX_PIN(0, 1, 11, 11, 2, 28), - MXC91231_PIN_AP_IPU_LD13 = IOMUX_PIN(0, 1, 12, 11, 3, 28), - MXC91231_PIN_AP_IPU_LD14 = IOMUX_PIN(0, 1, 13, 12, 0, 28), - MXC91231_PIN_AP_IPU_LD15 = IOMUX_PIN(0, 1, 14, 12, 1, 28), - MXC91231_PIN_AP_KPROW4 = IOMUX_PIN(0, 7, 0, 12, 2, 10), - MXC91231_PIN_AP_KPROW5 = IOMUX_PIN(0, 1, 16, 12, 3, 10), - MXC91231_PIN_AP_GPIO_AP_B17 = IOMUX_PIN(0, 1, 17, 13, 0, 10), - MXC91231_PIN_AP_GPIO_AP_B18 = IOMUX_PIN(0, 1, 18, 13, 1, 10), - MXC91231_PIN_AP_KPCOL3 = IOMUX_PIN(0, 1, 19, 13, 2, 11), - MXC91231_PIN_AP_KPCOL4 = IOMUX_PIN(0, 1, 20, 13, 3, 11), - MXC91231_PIN_AP_KPCOL5 = IOMUX_PIN(0, 1, 21, 14, 0, 11), - MXC91231_PIN_AP_GPIO_AP_B22 = IOMUX_PIN(0, 1, 22, 14, 1, 11), - MXC91231_PIN_AP_GPIO_AP_B23 = IOMUX_PIN(0, 1, 23, 14, 2, 11), - MXC91231_PIN_AP_CSI_D0 = IOMUX_PIN(0, 1, 24, 14, 3, 21), - MXC91231_PIN_AP_CSI_D1 = IOMUX_PIN(0, 1, 25, 15, 0, 21), - MXC91231_PIN_AP_CSI_D2 = IOMUX_PIN(0, 1, 26, 15, 1, 21), - MXC91231_PIN_AP_CSI_D3 = IOMUX_PIN(0, 1, 27, 15, 2, 21), - MXC91231_PIN_AP_CSI_D4 = IOMUX_PIN(0, 1, 28, 15, 3, 21), - MXC91231_PIN_AP_CSI_D5 = IOMUX_PIN(0, 1, 29, 16, 0, 21), - MXC91231_PIN_AP_CSI_D6 = IOMUX_PIN(0, 1, 30, 16, 1, 21), - MXC91231_PIN_AP_CSI_D7 = IOMUX_PIN(0, 1, 31, 16, 2, 21), - MXC91231_PIN_AP_CSI_D8 = IOMUX_PIN(0, 2, 0, 16, 3, 21), - MXC91231_PIN_AP_CSI_D9 = IOMUX_PIN(0, 2, 1, 17, 0, 21), - MXC91231_PIN_AP_CSI_MCLK = IOMUX_PIN(0, 2, 2, 17, 1, 21), - MXC91231_PIN_AP_CSI_VSYNC = IOMUX_PIN(0, 2, 3, 17, 2, 21), - MXC91231_PIN_AP_CSI_HSYNC = IOMUX_PIN(0, 2, 4, 17, 3, 21), - MXC91231_PIN_AP_CSI_PIXCLK = IOMUX_PIN(0, 2, 5, 18, 0, 21), - MXC91231_PIN_AP_I2CLK = IOMUX_PIN(0, 2, 6, 18, 1, 12), - MXC91231_PIN_AP_I2DAT = IOMUX_PIN(0, 2, 7, 18, 2, 12), - MXC91231_PIN_AP_GPIO_AP_C8 = IOMUX_PIN(0, 2, 8, 18, 3, 9), - MXC91231_PIN_AP_GPIO_AP_C9 = IOMUX_PIN(0, 2, 9, 19, 0, 9), - MXC91231_PIN_AP_GPIO_AP_C10 = IOMUX_PIN(0, 2, 10, 19, 1, 9), - MXC91231_PIN_AP_GPIO_AP_C11 = IOMUX_PIN(0, 2, 11, 19, 2, 9), - MXC91231_PIN_AP_GPIO_AP_C12 = IOMUX_PIN(0, 2, 12, 19, 3, 9), - MXC91231_PIN_AP_GPIO_AP_C13 = IOMUX_PIN(0, 2, 13, 20, 0, 28), - MXC91231_PIN_AP_GPIO_AP_C14 = IOMUX_PIN(0, 2, 14, 20, 1, 28), - MXC91231_PIN_AP_GPIO_AP_C15 = IOMUX_PIN(0, 2, 15, 20, 2, 9), - MXC91231_PIN_AP_GPIO_AP_C16 = IOMUX_PIN(0, 2, 16, 20, 3, 9), - MXC91231_PIN_AP_GPIO_AP_C17 = IOMUX_PIN(0, 2, 17, 21, 0, 9), - MXC91231_PIN_AP_ED_INT0 = IOMUX_PIN(0, 2, 18, 21, 1, 22), - MXC91231_PIN_AP_ED_INT1 = IOMUX_PIN(0, 2, 19, 21, 2, 22), - MXC91231_PIN_AP_ED_INT2 = IOMUX_PIN(0, 2, 20, 21, 3, 22), - MXC91231_PIN_AP_ED_INT3 = IOMUX_PIN(0, 2, 21, 22, 0, 22), - MXC91231_PIN_AP_ED_INT4 = IOMUX_PIN(0, 2, 22, 22, 1, 23), - MXC91231_PIN_AP_ED_INT5 = IOMUX_PIN(0, 2, 23, 22, 2, 23), - MXC91231_PIN_AP_ED_INT6 = IOMUX_PIN(0, 2, 24, 22, 3, 23), - MXC91231_PIN_AP_ED_INT7 = IOMUX_PIN(0, 2, 25, 23, 0, 23), - MXC91231_PIN_AP_U2_DSR_B = IOMUX_PIN(0, 2, 26, 23, 1, 28), - MXC91231_PIN_AP_U2_RI_B = IOMUX_PIN(0, 2, 27, 23, 2, 28), - MXC91231_PIN_AP_U2_CTS_B = IOMUX_PIN(0, 2, 28, 23, 3, 28), - MXC91231_PIN_AP_U2_DTR_B = IOMUX_PIN(0, 2, 29, 24, 0, 28), - MXC91231_PIN_AP_KPROW0 = IOMUX_PIN(0, 7, 0, 24, 1, 10), - MXC91231_PIN_AP_KPROW1 = IOMUX_PIN(0, 1, 15, 24, 2, 10), - MXC91231_PIN_AP_KPROW2 = IOMUX_PIN(0, 7, 0, 24, 3, 10), - MXC91231_PIN_AP_KPROW3 = IOMUX_PIN(0, 7, 0, 25, 0, 10), - MXC91231_PIN_AP_KPCOL0 = IOMUX_PIN(0, 7, 0, 25, 1, 11), - MXC91231_PIN_AP_KPCOL1 = IOMUX_PIN(0, 7, 0, 25, 2, 11), - MXC91231_PIN_AP_KPCOL2 = IOMUX_PIN(0, 7, 0, 25, 3, 11), - - /* Shared pins */ - MXC91231_PIN_SP_U3_TXD = IOMUX_PIN(1, 3, 0, 0, 0, 28), - MXC91231_PIN_SP_U3_RXD = IOMUX_PIN(1, 3, 1, 0, 1, 28), - MXC91231_PIN_SP_U3_RTS_B = IOMUX_PIN(1, 3, 2, 0, 2, 28), - MXC91231_PIN_SP_U3_CTS_B = IOMUX_PIN(1, 3, 3, 0, 3, 28), - MXC91231_PIN_SP_USB_TXOE_B = IOMUX_PIN(1, 3, 4, 1, 0, 28), - MXC91231_PIN_SP_USB_DAT_VP = IOMUX_PIN(1, 3, 5, 1, 1, 28), - MXC91231_PIN_SP_USB_SE0_VM = IOMUX_PIN(1, 3, 6, 1, 2, 28), - MXC91231_PIN_SP_USB_RXD = IOMUX_PIN(1, 3, 7, 1, 3, 28), - MXC91231_PIN_SP_UH2_TXOE_B = IOMUX_PIN(1, 3, 8, 2, 0, 28), - MXC91231_PIN_SP_UH2_SPEED = IOMUX_PIN(1, 3, 9, 2, 1, 28), - MXC91231_PIN_SP_UH2_SUSPEN = IOMUX_PIN(1, 3, 10, 2, 2, 28), - MXC91231_PIN_SP_UH2_TXDP = IOMUX_PIN(1, 3, 11, 2, 3, 28), - MXC91231_PIN_SP_UH2_RXDP = IOMUX_PIN(1, 3, 12, 3, 0, 28), - MXC91231_PIN_SP_UH2_RXDM = IOMUX_PIN(1, 3, 13, 3, 1, 28), - MXC91231_PIN_SP_UH2_OVR = IOMUX_PIN(1, 3, 14, 3, 2, 28), - MXC91231_PIN_SP_UH2_PWR = IOMUX_PIN(1, 3, 15, 3, 3, 28), - MXC91231_PIN_SP_SD1_DAT0 = IOMUX_PIN(1, 3, 16, 4, 0, 25), - MXC91231_PIN_SP_SD1_DAT1 = IOMUX_PIN(1, 3, 17, 4, 1, 25), - MXC91231_PIN_SP_SD1_DAT2 = IOMUX_PIN(1, 3, 18, 4, 2, 25), - MXC91231_PIN_SP_SD1_DAT3 = IOMUX_PIN(1, 3, 19, 4, 3, 25), - MXC91231_PIN_SP_SD1_CMD = IOMUX_PIN(1, 3, 20, 5, 0, 25), - MXC91231_PIN_SP_SD1_CLK = IOMUX_PIN(1, 3, 21, 5, 1, 25), - MXC91231_PIN_SP_SD2_DAT0 = IOMUX_PIN(1, 3, 22, 5, 2, 26), - MXC91231_PIN_SP_SD2_DAT1 = IOMUX_PIN(1, 3, 23, 5, 3, 26), - MXC91231_PIN_SP_SD2_DAT2 = IOMUX_PIN(1, 3, 24, 6, 0, 26), - MXC91231_PIN_SP_SD2_DAT3 = IOMUX_PIN(1, 3, 25, 6, 1, 26), - MXC91231_PIN_SP_GPIO_SP_A26 = IOMUX_PIN(1, 3, 26, 6, 2, 28), - MXC91231_PIN_SP_SPI1_CLK = IOMUX_PIN(1, 3, 27, 6, 3, 13), - MXC91231_PIN_SP_SPI1_MOSI = IOMUX_PIN(1, 3, 28, 7, 0, 13), - MXC91231_PIN_SP_SPI1_MISO = IOMUX_PIN(1, 3, 29, 7, 1, 13), - MXC91231_PIN_SP_SPI1_SS0 = IOMUX_PIN(1, 3, 30, 7, 2, 13), - MXC91231_PIN_SP_SPI1_SS1 = IOMUX_PIN(1, 3, 31, 7, 3, 13), - MXC91231_PIN_SP_SD2_CMD = IOMUX_PIN(1, 7, 0, 8, 0, 26), - MXC91231_PIN_SP_SD2_CLK = IOMUX_PIN(1, 7, 0, 8, 1, 26), - MXC91231_PIN_SP_SIM1_RST_B = IOMUX_PIN(1, 2, 30, 8, 2, 28), - MXC91231_PIN_SP_SIM1_SVEN = IOMUX_PIN(1, 7, 0, 8, 3, 28), - MXC91231_PIN_SP_SIM1_CLK = IOMUX_PIN(1, 7, 0, 9, 0, 28), - MXC91231_PIN_SP_SIM1_TRXD = IOMUX_PIN(1, 7, 0, 9, 1, 28), - MXC91231_PIN_SP_SIM1_PD = IOMUX_PIN(1, 2, 31, 9, 2, 28), - MXC91231_PIN_SP_UH2_TXDM = IOMUX_PIN(1, 7, 0, 9, 3, 28), - MXC91231_PIN_SP_UH2_RXD = IOMUX_PIN(1, 7, 0, 10, 0, 28), -}; - -#define PIN_AP_MAX (104) -#define PIN_SP_MAX (41) - -#define PIN_MAX (PIN_AP_MAX + PIN_SP_MAX) - -/* - * Convenience values for use with mxc_iomux_mode() - * - * Format here is MXC91231_PIN_(pin name)__(function) - */ - -#define MXC91231_PIN_SP_USB_DAT_VP__USB_DAT_VP \ - IOMUX_MODE(MXC91231_PIN_SP_USB_DAT_VP, IOMUX_CONFIG_FUNC) -#define MXC91231_PIN_SP_USB_SE0_VM__USB_SE0_VM \ - IOMUX_MODE(MXC91231_PIN_SP_USB_SE0_VM, IOMUX_CONFIG_FUNC) -#define MXC91231_PIN_SP_USB_DAT_VP__RXD2 \ - IOMUX_MODE(MXC91231_PIN_SP_USB_DAT_VP, IOMUX_CONFIG_ALT1) -#define MXC91231_PIN_SP_USB_SE0_VM__TXD2 \ - IOMUX_MODE(MXC91231_PIN_SP_USB_SE0_VM, IOMUX_CONFIG_ALT1) - - -#endif /* __MACH_IOMUX_MXC91231_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h index a3d930d3..35c89bc 100644 --- a/arch/arm/plat-mxc/include/mach/irqs.h +++ b/arch/arm/plat-mxc/include/mach/irqs.h @@ -35,8 +35,6 @@ #define MXC_GPIO_IRQS (32 * 4) #elif defined CONFIG_SOC_IMX51 #define MXC_GPIO_IRQS (32 * 4) -#elif defined CONFIG_ARCH_MXC91231 -#define MXC_GPIO_IRQS (32 * 4) #elif defined CONFIG_ARCH_MX3 #define MXC_GPIO_IRQS (32 * 3) #endif diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h index 5d51cbb..11be5cd 100644 --- a/arch/arm/plat-mxc/include/mach/memory.h +++ b/arch/arm/plat-mxc/include/mach/memory.h @@ -19,7 +19,6 @@ #define MX50_PHYS_OFFSET UL(0x70000000) #define MX51_PHYS_OFFSET UL(0x90000000) #define MX53_PHYS_OFFSET UL(0x70000000) -#define MXC91231_PHYS_OFFSET UL(0x90000000) #if !defined(CONFIG_RUNTIME_PHYS_OFFSET) # if defined CONFIG_ARCH_MX1 @@ -32,8 +31,6 @@ # define PLAT_PHYS_OFFSET MX27_PHYS_OFFSET # elif defined CONFIG_ARCH_MX3 # define PLAT_PHYS_OFFSET MX3x_PHYS_OFFSET -# elif defined CONFIG_ARCH_MXC91231 -# define PLAT_PHYS_OFFSET MXC91231_PHYS_OFFSET # elif defined CONFIG_ARCH_MX50 # define PLAT_PHYS_OFFSET MX50_PHYS_OFFSET # elif defined CONFIG_ARCH_MX51 diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h index cbc43ad..1dc1c52 100644 --- a/arch/arm/plat-mxc/include/mach/mx27.h +++ b/arch/arm/plat-mxc/include/mach/mx27.h @@ -60,8 +60,8 @@ #define MX27_AUDMUX_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x16000) #define MX27_CSPI3_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x17000) #define MX27_MSHC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x18000) -#define MX27_GPT5_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x19000) -#define MX27_GPT4_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1a000) +#define MX27_GPT4_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x19000) +#define MX27_GPT5_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1a000) #define MX27_UART5_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1b000) #define MX27_UART6_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1c000) #define MX27_I2C2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1d000) diff --git a/arch/arm/plat-mxc/include/mach/mx53.h b/arch/arm/plat-mxc/include/mach/mx53.h index ace1786..9d2a1ef 100644 --- a/arch/arm/plat-mxc/include/mach/mx53.h +++ b/arch/arm/plat-mxc/include/mach/mx53.h @@ -337,17 +337,4 @@ #define MX53_INT_GPIO7_LOW 107 #define MX53_INT_GPIO7_HIGH 108 -/* silicon revisions specific to i.MX53 */ -#define MX53_CHIP_REV_1_0 0x10 -#define MX53_CHIP_REV_1_1 0x11 -#define MX53_CHIP_REV_1_2 0x12 -#define MX53_CHIP_REV_1_3 0x13 -#define MX53_CHIP_REV_2_0 0x20 -#define MX53_CHIP_REV_2_1 0x21 -#define MX53_CHIP_REV_2_2 0x22 -#define MX53_CHIP_REV_2_3 0x23 -#define MX53_CHIP_REV_3_0 0x30 -#define MX53_CHIP_REV_3_1 0x31 -#define MX53_CHIP_REV_3_2 0x32 - #endif /* ifndef __MACH_MX53_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h index 1aea818..4ac53ce 100644 --- a/arch/arm/plat-mxc/include/mach/mxc.h +++ b/arch/arm/plat-mxc/include/mach/mxc.h @@ -35,7 +35,6 @@ #define MXC_CPU_MX50 50 #define MXC_CPU_MX51 51 #define MXC_CPU_MX53 53 -#define MXC_CPU_MXC91231 91231 #define IMX_CHIP_REVISION_1_0 0x10 #define IMX_CHIP_REVISION_1_1 0x11 @@ -177,18 +176,6 @@ extern unsigned int __mxc_cpu_type; # define cpu_is_mx53() (0) #endif -#ifdef CONFIG_ARCH_MXC91231 -# ifdef mxc_cpu_type -# undef mxc_cpu_type -# define mxc_cpu_type __mxc_cpu_type -# else -# define mxc_cpu_type MXC_CPU_MXC91231 -# endif -# define cpu_is_mxc91231() (mxc_cpu_type == MXC_CPU_MXC91231) -#else -# define cpu_is_mxc91231() (0) -#endif - #ifndef __ASSEMBLY__ struct cpu_op { @@ -207,14 +194,7 @@ enum mxc_cpu_pwr_mode { extern struct cpu_op *(*get_cpu_op)(int *op); #endif -#if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX2) -/* These are deprecated, use mx[23][157]_setup_weimcs instead. */ -#define CSCR_U(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10)) -#define CSCR_L(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10 + 0x4)) -#define CSCR_A(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10 + 0x8)) -#endif - -#define cpu_is_mx3() (cpu_is_mx31() || cpu_is_mx35() || cpu_is_mxc91231()) +#define cpu_is_mx3() (cpu_is_mx31() || cpu_is_mx35()) #define cpu_is_mx2() (cpu_is_mx21() || cpu_is_mx27()) #endif /* __ASM_ARCH_MXC_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mxc91231.h b/arch/arm/plat-mxc/include/mach/mxc91231.h deleted file mode 100644 index 765190f..0000000 --- a/arch/arm/plat-mxc/include/mach/mxc91231.h +++ /dev/null @@ -1,256 +0,0 @@ -/* - * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved. - * - Platform specific register memory map - * - * Copyright 2005-2007 Motorola, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#ifndef __MACH_MXC91231_H__ -#define __MACH_MXC91231_H__ - -/* - * L2CC - */ -#define MXC91231_L2CC_BASE_ADDR 0x30000000 -#define MXC91231_L2CC_SIZE SZ_64K - -/* - * AIPS 1 - */ -#define MXC91231_AIPS1_BASE_ADDR 0x43F00000 -#define MXC91231_AIPS1_SIZE SZ_1M - -#define MXC91231_AIPS1_CTRL_BASE_ADDR MXC91231_AIPS1_BASE_ADDR -#define MXC91231_MAX_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x04000) -#define MXC91231_EVTMON_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x08000) -#define MXC91231_CLKCTL_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x0C000) -#define MXC91231_ETB_SLOT4_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x10000) -#define MXC91231_ETB_SLOT5_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x14000) -#define MXC91231_ECT_CTIO_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x18000) -#define MXC91231_I2C_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x80000) -#define MXC91231_MU_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x88000) -#define MXC91231_UART1_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x90000) -#define MXC91231_UART2_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x94000) -#define MXC91231_DSM_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x98000) -#define MXC91231_OWIRE_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x9C000) -#define MXC91231_SSI1_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0xA0000) -#define MXC91231_KPP_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0xA8000) -#define MXC91231_IOMUX_AP_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0xAC000) -#define MXC91231_CTI_AP_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0xB8000) - -/* - * AIPS 2 - */ -#define MXC91231_AIPS2_BASE_ADDR 0x53F00000 -#define MXC91231_AIPS2_SIZE SZ_1M - -#define MXC91231_GEMK_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0x8C000) -#define MXC91231_GPT1_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0x90000) -#define MXC91231_EPIT1_AP_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0x94000) -#define MXC91231_SCC_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xAC000) -#define MXC91231_RNGA_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xB0000) -#define MXC91231_IPU_CTRL_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xC0000) -#define MXC91231_AUDMUX_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xC4000) -#define MXC91231_EDIO_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xC8000) -#define MXC91231_GPIO1_AP_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xCC000) -#define MXC91231_GPIO2_AP_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xD0000) -#define MXC91231_SDMA_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xD4000) -#define MXC91231_RTC_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xD8000) -#define MXC91231_WDOG1_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xDC000) -#define MXC91231_PWM_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xE0000) -#define MXC91231_GPIO3_AP_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xE4000) -#define MXC91231_WDOG2_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xE8000) -#define MXC91231_RTIC_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xEC000) -#define MXC91231_LPMC_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xF0000) - -/* - * SPBA global module 0 - */ -#define MXC91231_SPBA0_BASE_ADDR 0x50000000 -#define MXC91231_SPBA0_SIZE SZ_1M - -#define MXC91231_MMC_SDHC1_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x04000) -#define MXC91231_MMC_SDHC2_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x08000) -#define MXC91231_UART3_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x0C000) -#define MXC91231_CSPI2_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x10000) -#define MXC91231_SSI2_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x14000) -#define MXC91231_SIM_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x18000) -#define MXC91231_IIM_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x1C000) -#define MXC91231_CTI_SDMA_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x20000) -#define MXC91231_USBOTG_CTRL_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x24000) -#define MXC91231_USBOTG_DATA_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x28000) -#define MXC91231_CSPI1_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x30000) -#define MXC91231_SPBA_CTRL_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x3C000) -#define MXC91231_IOMUX_COM_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x40000) -#define MXC91231_CRM_COM_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x44000) -#define MXC91231_CRM_AP_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x48000) -#define MXC91231_PLL0_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x4C000) -#define MXC91231_PLL1_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x50000) -#define MXC91231_PLL2_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x54000) -#define MXC91231_GPIO4_SH_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x58000) -#define MXC91231_HAC_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x5C000) -#define MXC91231_SAHARA_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x5C000) -#define MXC91231_PLL3_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x60000) - -/* - * SPBA global module 1 - */ -#define MXC91231_SPBA1_BASE_ADDR 0x52000000 -#define MXC91231_SPBA1_SIZE SZ_1M - -#define MXC91231_MQSPI_BASE_ADDR (MXC91231_SPBA1_BASE_ADDR + 0x34000) -#define MXC91231_EL1T_BASE_ADDR (MXC91231_SPBA1_BASE_ADDR + 0x38000) - -/*! - * Defines for SPBA modules - */ -#define MXC91231_SPBA_SDHC1 0x04 -#define MXC91231_SPBA_SDHC2 0x08 -#define MXC91231_SPBA_UART3 0x0C -#define MXC91231_SPBA_CSPI2 0x10 -#define MXC91231_SPBA_SSI2 0x14 -#define MXC91231_SPBA_SIM 0x18 -#define MXC91231_SPBA_IIM 0x1C -#define MXC91231_SPBA_CTI_SDMA 0x20 -#define MXC91231_SPBA_USBOTG_CTRL_REGS 0x24 -#define MXC91231_SPBA_USBOTG_DATA_REGS 0x28 -#define MXC91231_SPBA_CSPI1 0x30 -#define MXC91231_SPBA_MQSPI 0x34 -#define MXC91231_SPBA_EL1T 0x38 -#define MXC91231_SPBA_IOMUX 0x40 -#define MXC91231_SPBA_CRM_COM 0x44 -#define MXC91231_SPBA_CRM_AP 0x48 -#define MXC91231_SPBA_PLL0 0x4C -#define MXC91231_SPBA_PLL1 0x50 -#define MXC91231_SPBA_PLL2 0x54 -#define MXC91231_SPBA_GPIO4 0x58 -#define MXC91231_SPBA_SAHARA 0x5C - -/* - * ROMP and AVIC - */ -#define MXC91231_ROMP_BASE_ADDR 0x60000000 -#define MXC91231_ROMP_SIZE SZ_64K - -#define MXC91231_AVIC_BASE_ADDR 0x68000000 -#define MXC91231_AVIC_SIZE SZ_64K - -/* - * NAND, SDRAM, WEIM, M3IF, EMI controllers - */ -#define MXC91231_X_MEMC_BASE_ADDR 0xB8000000 -#define MXC91231_X_MEMC_SIZE SZ_64K - -#define MXC91231_NFC_BASE_ADDR (MXC91231_X_MEMC_BASE_ADDR + 0x0000) -#define MXC91231_ESDCTL_BASE_ADDR (MXC91231_X_MEMC_BASE_ADDR + 0x1000) -#define MXC91231_WEIM_BASE_ADDR (MXC91231_X_MEMC_BASE_ADDR + 0x2000) -#define MXC91231_M3IF_BASE_ADDR (MXC91231_X_MEMC_BASE_ADDR + 0x3000) -#define MXC91231_EMI_CTL_BASE_ADDR (MXC91231_X_MEMC_BASE_ADDR + 0x4000) - -/* - * Memory regions and CS - * CPLD is connected on CS4 - * CS5 is TP1021 or it is not connected - * */ -#define MXC91231_FB_RAM_BASE_ADDR 0x78000000 -#define MXC91231_FB_RAM_SIZE SZ_256K -#define MXC91231_CSD0_BASE_ADDR 0x80000000 -#define MXC91231_CSD1_BASE_ADDR 0x90000000 -#define MXC91231_CS0_BASE_ADDR 0xA0000000 -#define MXC91231_CS1_BASE_ADDR 0xA8000000 -#define MXC91231_CS2_BASE_ADDR 0xB0000000 -#define MXC91231_CS3_BASE_ADDR 0xB2000000 -#define MXC91231_CS4_BASE_ADDR 0xB4000000 -#define MXC91231_CS5_BASE_ADDR 0xB6000000 - -/* - * This macro defines the physical to virtual address mapping for all the - * peripheral modules. It is used by passing in the physical address as x - * and returning the virtual address. - */ -#define MXC91231_IO_P2V(x) IMX_IO_P2V(x) -#define MXC91231_IO_ADDRESS(x) IOMEM(MXC91231_IO_P2V(x)) - -/* - * Interrupt numbers - */ -#define MXC91231_INT_GPIO3 0 -#define MXC91231_INT_EL1T_CI 1 -#define MXC91231_INT_EL1T_RFCI 2 -#define MXC91231_INT_EL1T_RFI 3 -#define MXC91231_INT_EL1T_MCU 4 -#define MXC91231_INT_EL1T_IPI 5 -#define MXC91231_INT_MU_GEN 6 -#define MXC91231_INT_GPIO4 7 -#define MXC91231_INT_MMC_SDHC2 8 -#define MXC91231_INT_MMC_SDHC1 9 -#define MXC91231_INT_I2C 10 -#define MXC91231_INT_SSI2 11 -#define MXC91231_INT_SSI1 12 -#define MXC91231_INT_CSPI2 13 -#define MXC91231_INT_CSPI1 14 -#define MXC91231_INT_RTIC 15 -#define MXC91231_INT_SAHARA 15 -#define MXC91231_INT_HAC 15 -#define MXC91231_INT_UART3_RX 16 -#define MXC91231_INT_UART3_TX 17 -#define MXC91231_INT_UART3_MINT 18 -#define MXC91231_INT_ECT 19 -#define MXC91231_INT_SIM_IPB 20 -#define MXC91231_INT_SIM_DATA 21 -#define MXC91231_INT_RNGA 22 -#define MXC91231_INT_DSM_AP 23 -#define MXC91231_INT_KPP 24 -#define MXC91231_INT_RTC 25 -#define MXC91231_INT_PWM 26 -#define MXC91231_INT_GEMK_AP 27 -#define MXC91231_INT_EPIT 28 -#define MXC91231_INT_GPT 29 -#define MXC91231_INT_UART2_RX 30 -#define MXC91231_INT_UART2_TX 31 -#define MXC91231_INT_UART2_MINT 32 -#define MXC91231_INT_NANDFC 33 -#define MXC91231_INT_SDMA 34 -#define MXC91231_INT_USB_WAKEUP 35 -#define MXC91231_INT_USB_SOF 36 -#define MXC91231_INT_PMU_EVTMON 37 -#define MXC91231_INT_USB_FUNC 38 -#define MXC91231_INT_USB_DMA 39 -#define MXC91231_INT_USB_CTRL 40 -#define MXC91231_INT_IPU_ERR 41 -#define MXC91231_INT_IPU_SYN 42 -#define MXC91231_INT_UART1_RX 43 -#define MXC91231_INT_UART1_TX 44 -#define MXC91231_INT_UART1_MINT 45 -#define MXC91231_INT_IIM 46 -#define MXC91231_INT_MU_RX_OR 47 -#define MXC91231_INT_MU_TX_OR 48 -#define MXC91231_INT_SCC_SCM 49 -#define MXC91231_INT_SCC_SMN 50 -#define MXC91231_INT_GPIO2 51 -#define MXC91231_INT_GPIO1 52 -#define MXC91231_INT_MQSPI1 53 -#define MXC91231_INT_MQSPI2 54 -#define MXC91231_INT_WDOG2 55 -#define MXC91231_INT_EXT_INT7 56 -#define MXC91231_INT_EXT_INT6 57 -#define MXC91231_INT_EXT_INT5 58 -#define MXC91231_INT_EXT_INT4 59 -#define MXC91231_INT_EXT_INT3 60 -#define MXC91231_INT_EXT_INT2 61 -#define MXC91231_INT_EXT_INT1 62 -#define MXC91231_INT_EXT_INT0 63 - -#define MXC91231_MAX_INT_LINES 63 -#define MXC91231_MAX_EXT_LINES 8 - -#endif /* __MACH_MXC91231_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h index 0417da9..51f02a9 100644 --- a/arch/arm/plat-mxc/include/mach/system.h +++ b/arch/arm/plat-mxc/include/mach/system.h @@ -24,12 +24,6 @@ extern void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode); static inline void arch_idle(void) { -#ifdef CONFIG_ARCH_MXC91231 - if (cpu_is_mxc91231()) { - /* Need this to set DSM low-power mode */ - mxc91231_prepare_idle(); - } -#endif /* fix i.MX31 errata TLSbo65953 and i.MX35 errata ENGcm09472 */ if (cpu_is_mx31() || cpu_is_mx35()) { unsigned long reg = 0; diff --git a/arch/arm/plat-mxc/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/timex.h index 2d96246..d61d5c7 100644 --- a/arch/arm/plat-mxc/include/mach/timex.h +++ b/arch/arm/plat-mxc/include/mach/timex.h @@ -26,8 +26,6 @@ #define CLOCK_TICK_RATE 16000000 #elif defined CONFIG_ARCH_MX5 #define CLOCK_TICK_RATE 8000000 -#elif defined CONFIG_ARCH_MXC91231 -#define CLOCK_TICK_RATE 13000000 #endif #endif /* __ASM_ARCH_MXC_TIMEX_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h index 4864b0a..d85e2d1 100644 --- a/arch/arm/plat-mxc/include/mach/uncompress.h +++ b/arch/arm/plat-mxc/include/mach/uncompress.h @@ -21,7 +21,7 @@ #include <asm/mach-types.h> -static unsigned long uart_base; +unsigned long uart_base; #define UART(x) (*(volatile unsigned long *)(uart_base + (x))) diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c index 3455fc0..8024f2a 100644 --- a/arch/arm/plat-mxc/system.c +++ b/arch/arm/plat-mxc/system.c @@ -37,12 +37,6 @@ void arch_reset(char mode, const char *cmd) { unsigned int wcr_enable; -#ifdef CONFIG_ARCH_MXC91231 - if (cpu_is_mxc91231()) { - mxc91231_arch_reset(mode, cmd); - return; - } -#endif #ifdef CONFIG_MACH_MX51_EFIKAMX if (machine_is_mx51_efikamx()) { mx51_efikamx_reset(); diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c index e4ac94a..4b0fe28 100644 --- a/arch/arm/plat-mxc/time.c +++ b/arch/arm/plat-mxc/time.c @@ -54,7 +54,7 @@ #define MX2_TSTAT_CAPT (1 << 1) #define MX2_TSTAT_COMP (1 << 0) -/* MX31, MX35, MX25, MXC91231, MX5 */ +/* MX31, MX35, MX25, MX5 */ #define V2_TCTL_WAITEN (1 << 3) /* Wait enable mode */ #define V2_TCTL_CLK_IPG (1 << 6) #define V2_TCTL_FRR (1 << 9) diff --git a/arch/arm/plat-nomadik/gpio.c b/arch/arm/plat-nomadik/gpio.c index f49748e..307b813 100644 --- a/arch/arm/plat-nomadik/gpio.c +++ b/arch/arm/plat-nomadik/gpio.c @@ -23,6 +23,8 @@ #include <linux/irq.h> #include <linux/slab.h> +#include <asm/mach/irq.h> + #include <plat/pincfg.h> #include <mach/hardware.h> #include <mach/gpio.h> @@ -681,13 +683,7 @@ static void __nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc, struct irq_chip *host_chip = irq_get_chip(irq); unsigned int first_irq; - if (host_chip->irq_mask_ack) - host_chip->irq_mask_ack(&desc->irq_data); - else { - host_chip->irq_mask(&desc->irq_data); - if (host_chip->irq_ack) - host_chip->irq_ack(&desc->irq_data); - } + chained_irq_enter(host_chip, desc); nmk_chip = irq_get_handler_data(irq); first_irq = NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base); @@ -698,7 +694,7 @@ static void __nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc, status &= ~BIT(bit); } - host_chip->irq_unmask(&desc->irq_data); + chained_irq_exit(host_chip, desc); } static void nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index e9c0efc..49a4c75 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -19,6 +19,7 @@ config ARCH_OMAP1 config ARCH_OMAP2PLUS bool "TI OMAP2/3/4" select CLKDEV_LOOKUP + select GENERIC_IRQ_CHIP select OMAP_DM_TIMER help "Systems based on OMAP2, OMAP3 or OMAP4" diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index bd9e321..efb8693 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -1137,8 +1137,9 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) struct gpio_bank *bank; u32 retrigger = 0; int unmasked = 0; + struct irq_chip *chip = irq_desc_get_chip(desc); - desc->irq_data.chip->irq_ack(&desc->irq_data); + chained_irq_enter(chip, desc); bank = irq_get_handler_data(irq); #ifdef CONFIG_ARCH_OMAP1 @@ -1195,7 +1196,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) configured, we could unmask GPIO bank interrupt immediately */ if (!level_mask && !unmasked) { unmasked = 1; - desc->irq_data.chip->irq_unmask(&desc->irq_data); + chained_irq_exit(chip, desc); } isr |= retrigger; @@ -1231,7 +1232,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) interrupt */ exit: if (!unmasked) - desc->irq_data.chip->irq_unmask(&desc->irq_data); + chained_irq_exit(chip, desc); } static void gpio_irq_shutdown(struct irq_data *d) diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index 30b891c..565d266 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -27,8 +27,8 @@ #define MDR1_MODE_MASK 0x07 -static volatile u8 *uart_base; -static int uart_shift; +volatile u8 *uart_base; +int uart_shift; /* * Store the DEBUG_LL uart number into memory. diff --git a/arch/arm/plat-orion/Makefile b/arch/arm/plat-orion/Makefile index 56021a7..95a5fc5 100644 --- a/arch/arm/plat-orion/Makefile +++ b/arch/arm/plat-orion/Makefile @@ -2,7 +2,7 @@ # Makefile for the linux kernel. # -obj-y := irq.o pcie.o time.o +obj-y := irq.o pcie.o time.o common.o mpp.o obj-m := obj-n := obj- := diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c new file mode 100644 index 0000000..9e5451b --- /dev/null +++ b/arch/arm/plat-orion/common.c @@ -0,0 +1,957 @@ +/* + * arch/arm/plat-orion/common.c + * + * Marvell Orion SoC common setup code used by multiple mach-/common.c + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <linux/serial_8250.h> +#include <linux/mbus.h> +#include <linux/ata_platform.h> +#include <linux/mv643xx_eth.h> +#include <linux/mv643xx_i2c.h> +#include <net/dsa.h> +#include <linux/spi/orion_spi.h> +#include <plat/orion_wdt.h> +#include <plat/mv_xor.h> +#include <plat/ehci-orion.h> + +/* Fill in the resources structure and link it into the platform + device structure. There is always a memory region, and nearly + always an interrupt.*/ +static void fill_resources(struct platform_device *device, + struct resource *resources, + resource_size_t mapbase, + resource_size_t size, + unsigned int irq) +{ + device->resource = resources; + device->num_resources = 1; + resources[0].flags = IORESOURCE_MEM; + resources[0].start = mapbase; + resources[0].end = mapbase + size; + + if (irq != NO_IRQ) { + device->num_resources++; + resources[1].flags = IORESOURCE_IRQ; + resources[1].start = irq; + resources[1].end = irq; + } +} + +/***************************************************************************** + * UART + ****************************************************************************/ +static void __init uart_complete( + struct platform_device *orion_uart, + struct plat_serial8250_port *data, + struct resource *resources, + unsigned int membase, + resource_size_t mapbase, + unsigned int irq, + unsigned int uartclk) +{ + data->mapbase = mapbase; + data->membase = (void __iomem *)membase; + data->irq = irq; + data->uartclk = uartclk; + orion_uart->dev.platform_data = data; + + fill_resources(orion_uart, resources, mapbase, 0xff, irq); + platform_device_register(orion_uart); +} + +/***************************************************************************** + * UART0 + ****************************************************************************/ +static struct plat_serial8250_port orion_uart0_data[] = { + { + .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + }, { + }, +}; + +static struct resource orion_uart0_resources[2]; + +static struct platform_device orion_uart0 = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, +}; + +void __init orion_uart0_init(unsigned int membase, + resource_size_t mapbase, + unsigned int irq, + unsigned int uartclk) +{ + uart_complete(&orion_uart0, orion_uart0_data, orion_uart0_resources, + membase, mapbase, irq, uartclk); +} + +/***************************************************************************** + * UART1 + ****************************************************************************/ +static struct plat_serial8250_port orion_uart1_data[] = { + { + .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + }, { + }, +}; + +static struct resource orion_uart1_resources[2]; + +static struct platform_device orion_uart1 = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM1, +}; + +void __init orion_uart1_init(unsigned int membase, + resource_size_t mapbase, + unsigned int irq, + unsigned int uartclk) +{ + uart_complete(&orion_uart1, orion_uart1_data, orion_uart1_resources, + membase, mapbase, irq, uartclk); +} + +/***************************************************************************** + * UART2 + ****************************************************************************/ +static struct plat_serial8250_port orion_uart2_data[] = { + { + .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + }, { + }, +}; + +static struct resource orion_uart2_resources[2]; + +static struct platform_device orion_uart2 = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM2, +}; + +void __init orion_uart2_init(unsigned int membase, + resource_size_t mapbase, + unsigned int irq, + unsigned int uartclk) +{ + uart_complete(&orion_uart2, orion_uart2_data, orion_uart2_resources, + membase, mapbase, irq, uartclk); +} + +/***************************************************************************** + * UART3 + ****************************************************************************/ +static struct plat_serial8250_port orion_uart3_data[] = { + { + .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + }, { + }, +}; + +static struct resource orion_uart3_resources[2]; + +static struct platform_device orion_uart3 = { + .name = "serial8250", + .id = 3, +}; + +void __init orion_uart3_init(unsigned int membase, + resource_size_t mapbase, + unsigned int irq, + unsigned int uartclk) +{ + uart_complete(&orion_uart3, orion_uart3_data, orion_uart3_resources, + membase, mapbase, irq, uartclk); +} + +/***************************************************************************** + * SoC RTC + ****************************************************************************/ +static struct resource orion_rtc_resource[2]; + +void __init orion_rtc_init(unsigned long mapbase, + unsigned long irq) +{ + orion_rtc_resource[0].start = mapbase; + orion_rtc_resource[0].end = mapbase + SZ_32 - 1; + orion_rtc_resource[0].flags = IORESOURCE_MEM; + orion_rtc_resource[1].start = irq; + orion_rtc_resource[1].end = irq; + orion_rtc_resource[1].flags = IORESOURCE_IRQ; + + platform_device_register_simple("rtc-mv", -1, orion_rtc_resource, 2); +} + +/***************************************************************************** + * GE + ****************************************************************************/ +static __init void ge_complete( + struct mv643xx_eth_shared_platform_data *orion_ge_shared_data, + struct mbus_dram_target_info *mbus_dram_info, int tclk, + struct resource *orion_ge_resource, unsigned long irq, + struct platform_device *orion_ge_shared, + struct mv643xx_eth_platform_data *eth_data, + struct platform_device *orion_ge) +{ + orion_ge_shared_data->dram = mbus_dram_info; + orion_ge_shared_data->t_clk = tclk; + orion_ge_resource->start = irq; + orion_ge_resource->end = irq; + eth_data->shared = orion_ge_shared; + orion_ge->dev.platform_data = eth_data; + + platform_device_register(orion_ge_shared); + platform_device_register(orion_ge); +} + +/***************************************************************************** + * GE00 + ****************************************************************************/ +struct mv643xx_eth_shared_platform_data orion_ge00_shared_data; + +static struct resource orion_ge00_shared_resources[] = { + { + .name = "ge00 base", + }, { + .name = "ge00 err irq", + }, +}; + +static struct platform_device orion_ge00_shared = { + .name = MV643XX_ETH_SHARED_NAME, + .id = 0, + .dev = { + .platform_data = &orion_ge00_shared_data, + }, +}; + +static struct resource orion_ge00_resources[] = { + { + .name = "ge00 irq", + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device orion_ge00 = { + .name = MV643XX_ETH_NAME, + .id = 0, + .num_resources = 1, + .resource = orion_ge00_resources, + .dev = { + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data, + struct mbus_dram_target_info *mbus_dram_info, + unsigned long mapbase, + unsigned long irq, + unsigned long irq_err, + int tclk) +{ + fill_resources(&orion_ge00_shared, orion_ge00_shared_resources, + mapbase + 0x2000, SZ_16K - 1, irq_err); + ge_complete(&orion_ge00_shared_data, mbus_dram_info, tclk, + orion_ge00_resources, irq, &orion_ge00_shared, + eth_data, &orion_ge00); +} + +/***************************************************************************** + * GE01 + ****************************************************************************/ +struct mv643xx_eth_shared_platform_data orion_ge01_shared_data = { + .shared_smi = &orion_ge00_shared, +}; + +static struct resource orion_ge01_shared_resources[] = { + { + .name = "ge01 base", + }, { + .name = "ge01 err irq", + }, +}; + +static struct platform_device orion_ge01_shared = { + .name = MV643XX_ETH_SHARED_NAME, + .id = 1, + .dev = { + .platform_data = &orion_ge01_shared_data, + }, +}; + +static struct resource orion_ge01_resources[] = { + { + .name = "ge01 irq", + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device orion_ge01 = { + .name = MV643XX_ETH_NAME, + .id = 1, + .num_resources = 1, + .resource = orion_ge01_resources, + .dev = { + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data, + struct mbus_dram_target_info *mbus_dram_info, + unsigned long mapbase, + unsigned long irq, + unsigned long irq_err, + int tclk) +{ + fill_resources(&orion_ge01_shared, orion_ge01_shared_resources, + mapbase + 0x2000, SZ_16K - 1, irq_err); + ge_complete(&orion_ge01_shared_data, mbus_dram_info, tclk, + orion_ge01_resources, irq, &orion_ge01_shared, + eth_data, &orion_ge01); +} + +/***************************************************************************** + * GE10 + ****************************************************************************/ +struct mv643xx_eth_shared_platform_data orion_ge10_shared_data = { + .shared_smi = &orion_ge00_shared, +}; + +static struct resource orion_ge10_shared_resources[] = { + { + .name = "ge10 base", + }, { + .name = "ge10 err irq", + }, +}; + +static struct platform_device orion_ge10_shared = { + .name = MV643XX_ETH_SHARED_NAME, + .id = 1, + .dev = { + .platform_data = &orion_ge10_shared_data, + }, +}; + +static struct resource orion_ge10_resources[] = { + { + .name = "ge10 irq", + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device orion_ge10 = { + .name = MV643XX_ETH_NAME, + .id = 1, + .num_resources = 2, + .resource = orion_ge10_resources, + .dev = { + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data, + struct mbus_dram_target_info *mbus_dram_info, + unsigned long mapbase, + unsigned long irq, + unsigned long irq_err, + int tclk) +{ + fill_resources(&orion_ge10_shared, orion_ge10_shared_resources, + mapbase + 0x2000, SZ_16K - 1, irq_err); + ge_complete(&orion_ge10_shared_data, mbus_dram_info, tclk, + orion_ge10_resources, irq, &orion_ge10_shared, + eth_data, &orion_ge10); +} + +/***************************************************************************** + * GE11 + ****************************************************************************/ +struct mv643xx_eth_shared_platform_data orion_ge11_shared_data = { + .shared_smi = &orion_ge00_shared, +}; + +static struct resource orion_ge11_shared_resources[] = { + { + .name = "ge11 base", + }, { + .name = "ge11 err irq", + }, +}; + +static struct platform_device orion_ge11_shared = { + .name = MV643XX_ETH_SHARED_NAME, + .id = 1, + .dev = { + .platform_data = &orion_ge11_shared_data, + }, +}; + +static struct resource orion_ge11_resources[] = { + { + .name = "ge11 irq", + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device orion_ge11 = { + .name = MV643XX_ETH_NAME, + .id = 1, + .num_resources = 2, + .resource = orion_ge11_resources, + .dev = { + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data, + struct mbus_dram_target_info *mbus_dram_info, + unsigned long mapbase, + unsigned long irq, + unsigned long irq_err, + int tclk) +{ + fill_resources(&orion_ge11_shared, orion_ge11_shared_resources, + mapbase + 0x2000, SZ_16K - 1, irq_err); + ge_complete(&orion_ge11_shared_data, mbus_dram_info, tclk, + orion_ge11_resources, irq, &orion_ge11_shared, + eth_data, &orion_ge11); +} + +/***************************************************************************** + * Ethernet switch + ****************************************************************************/ +static struct resource orion_switch_resources[] = { + { + .start = 0, + .end = 0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device orion_switch_device = { + .name = "dsa", + .id = 0, + .num_resources = 0, + .resource = orion_switch_resources, +}; + +void __init orion_ge00_switch_init(struct dsa_platform_data *d, int irq) +{ + int i; + + if (irq != NO_IRQ) { + orion_switch_resources[0].start = irq; + orion_switch_resources[0].end = irq; + orion_switch_device.num_resources = 1; + } + + d->netdev = &orion_ge00.dev; + for (i = 0; i < d->nr_chips; i++) + d->chip[i].mii_bus = &orion_ge00_shared.dev; + orion_switch_device.dev.platform_data = d; + + platform_device_register(&orion_switch_device); +} + +/***************************************************************************** + * I2C + ****************************************************************************/ +static struct mv64xxx_i2c_pdata orion_i2c_pdata = { + .freq_n = 3, + .timeout = 1000, /* Default timeout of 1 second */ +}; + +static struct resource orion_i2c_resources[2]; + +static struct platform_device orion_i2c = { + .name = MV64XXX_I2C_CTLR_NAME, + .id = 0, + .dev = { + .platform_data = &orion_i2c_pdata, + }, +}; + +static struct mv64xxx_i2c_pdata orion_i2c_1_pdata = { + .freq_n = 3, + .timeout = 1000, /* Default timeout of 1 second */ +}; + +static struct resource orion_i2c_1_resources[2]; + +static struct platform_device orion_i2c_1 = { + .name = MV64XXX_I2C_CTLR_NAME, + .id = 1, + .dev = { + .platform_data = &orion_i2c_1_pdata, + }, +}; + +void __init orion_i2c_init(unsigned long mapbase, + unsigned long irq, + unsigned long freq_m) +{ + orion_i2c_pdata.freq_m = freq_m; + fill_resources(&orion_i2c, orion_i2c_resources, mapbase, + SZ_32 - 1, irq); + platform_device_register(&orion_i2c); +} + +void __init orion_i2c_1_init(unsigned long mapbase, + unsigned long irq, + unsigned long freq_m) +{ + orion_i2c_1_pdata.freq_m = freq_m; + fill_resources(&orion_i2c_1, orion_i2c_1_resources, mapbase, + SZ_32 - 1, irq); + platform_device_register(&orion_i2c_1); +} + +/***************************************************************************** + * SPI + ****************************************************************************/ +static struct orion_spi_info orion_spi_plat_data; +static struct resource orion_spi_resources; + +static struct platform_device orion_spi = { + .name = "orion_spi", + .id = 0, + .dev = { + .platform_data = &orion_spi_plat_data, + }, +}; + +static struct orion_spi_info orion_spi_1_plat_data; +static struct resource orion_spi_1_resources; + +static struct platform_device orion_spi_1 = { + .name = "orion_spi", + .id = 1, + .dev = { + .platform_data = &orion_spi_1_plat_data, + }, +}; + +/* Note: The SPI silicon core does have interrupts. However the + * current Linux software driver does not use interrupts. */ + +void __init orion_spi_init(unsigned long mapbase, + unsigned long tclk) +{ + orion_spi_plat_data.tclk = tclk; + fill_resources(&orion_spi, &orion_spi_resources, + mapbase, SZ_512 - 1, NO_IRQ); + platform_device_register(&orion_spi); +} + +void __init orion_spi_1_init(unsigned long mapbase, + unsigned long tclk) +{ + orion_spi_1_plat_data.tclk = tclk; + fill_resources(&orion_spi_1, &orion_spi_1_resources, + mapbase, SZ_512 - 1, NO_IRQ); + platform_device_register(&orion_spi_1); +} + +/***************************************************************************** + * Watchdog + ****************************************************************************/ +static struct orion_wdt_platform_data orion_wdt_data; + +static struct platform_device orion_wdt_device = { + .name = "orion_wdt", + .id = -1, + .dev = { + .platform_data = &orion_wdt_data, + }, + .num_resources = 0, +}; + +void __init orion_wdt_init(unsigned long tclk) +{ + orion_wdt_data.tclk = tclk; + platform_device_register(&orion_wdt_device); +} + +/***************************************************************************** + * XOR + ****************************************************************************/ +static struct mv_xor_platform_shared_data orion_xor_shared_data; + +static u64 orion_xor_dmamask = DMA_BIT_MASK(32); + +void __init orion_xor_init_channels( + struct mv_xor_platform_data *orion_xor0_data, + struct platform_device *orion_xor0_channel, + struct mv_xor_platform_data *orion_xor1_data, + struct platform_device *orion_xor1_channel) +{ + /* + * two engines can't do memset simultaneously, this limitation + * satisfied by removing memset support from one of the engines. + */ + dma_cap_set(DMA_MEMCPY, orion_xor0_data->cap_mask); + dma_cap_set(DMA_XOR, orion_xor0_data->cap_mask); + platform_device_register(orion_xor0_channel); + + dma_cap_set(DMA_MEMCPY, orion_xor1_data->cap_mask); + dma_cap_set(DMA_MEMSET, orion_xor1_data->cap_mask); + dma_cap_set(DMA_XOR, orion_xor1_data->cap_mask); + platform_device_register(orion_xor1_channel); +} + +/***************************************************************************** + * XOR0 + ****************************************************************************/ +static struct resource orion_xor0_shared_resources[] = { + { + .name = "xor 0 low", + .flags = IORESOURCE_MEM, + }, { + .name = "xor 0 high", + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device orion_xor0_shared = { + .name = MV_XOR_SHARED_NAME, + .id = 0, + .dev = { + .platform_data = &orion_xor_shared_data, + }, + .num_resources = ARRAY_SIZE(orion_xor0_shared_resources), + .resource = orion_xor0_shared_resources, +}; + +static struct resource orion_xor00_resources[] = { + [0] = { + .flags = IORESOURCE_IRQ, + }, +}; + +static struct mv_xor_platform_data orion_xor00_data = { + .shared = &orion_xor0_shared, + .hw_id = 0, + .pool_size = PAGE_SIZE, +}; + +static struct platform_device orion_xor00_channel = { + .name = MV_XOR_NAME, + .id = 0, + .num_resources = ARRAY_SIZE(orion_xor00_resources), + .resource = orion_xor00_resources, + .dev = { + .dma_mask = &orion_xor_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(64), + .platform_data = &orion_xor00_data, + }, +}; + +static struct resource orion_xor01_resources[] = { + [0] = { + .flags = IORESOURCE_IRQ, + }, +}; + +static struct mv_xor_platform_data orion_xor01_data = { + .shared = &orion_xor0_shared, + .hw_id = 1, + .pool_size = PAGE_SIZE, +}; + +static struct platform_device orion_xor01_channel = { + .name = MV_XOR_NAME, + .id = 1, + .num_resources = ARRAY_SIZE(orion_xor01_resources), + .resource = orion_xor01_resources, + .dev = { + .dma_mask = &orion_xor_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(64), + .platform_data = &orion_xor01_data, + }, +}; + +void __init orion_xor0_init(struct mbus_dram_target_info *mbus_dram_info, + unsigned long mapbase_low, + unsigned long mapbase_high, + unsigned long irq_0, + unsigned long irq_1) +{ + orion_xor_shared_data.dram = mbus_dram_info; + + orion_xor0_shared_resources[0].start = mapbase_low; + orion_xor0_shared_resources[0].end = mapbase_low + 0xff; + orion_xor0_shared_resources[1].start = mapbase_high; + orion_xor0_shared_resources[1].end = mapbase_high + 0xff; + + orion_xor00_resources[0].start = irq_0; + orion_xor00_resources[0].end = irq_0; + orion_xor01_resources[0].start = irq_1; + orion_xor01_resources[0].end = irq_1; + + platform_device_register(&orion_xor0_shared); + + orion_xor_init_channels(&orion_xor00_data, &orion_xor00_channel, + &orion_xor01_data, &orion_xor01_channel); +} + +/***************************************************************************** + * XOR1 + ****************************************************************************/ +static struct resource orion_xor1_shared_resources[] = { + { + .name = "xor 1 low", + .flags = IORESOURCE_MEM, + }, { + .name = "xor 1 high", + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device orion_xor1_shared = { + .name = MV_XOR_SHARED_NAME, + .id = 1, + .dev = { + .platform_data = &orion_xor_shared_data, + }, + .num_resources = ARRAY_SIZE(orion_xor1_shared_resources), + .resource = orion_xor1_shared_resources, +}; + +static struct resource orion_xor10_resources[] = { + [0] = { + .flags = IORESOURCE_IRQ, + }, +}; + +static struct mv_xor_platform_data orion_xor10_data = { + .shared = &orion_xor1_shared, + .hw_id = 0, + .pool_size = PAGE_SIZE, +}; + +static struct platform_device orion_xor10_channel = { + .name = MV_XOR_NAME, + .id = 2, + .num_resources = ARRAY_SIZE(orion_xor10_resources), + .resource = orion_xor10_resources, + .dev = { + .dma_mask = &orion_xor_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(64), + .platform_data = &orion_xor10_data, + }, +}; + +static struct resource orion_xor11_resources[] = { + [0] = { + .flags = IORESOURCE_IRQ, + }, +}; + +static struct mv_xor_platform_data orion_xor11_data = { + .shared = &orion_xor1_shared, + .hw_id = 1, + .pool_size = PAGE_SIZE, +}; + +static struct platform_device orion_xor11_channel = { + .name = MV_XOR_NAME, + .id = 3, + .num_resources = ARRAY_SIZE(orion_xor11_resources), + .resource = orion_xor11_resources, + .dev = { + .dma_mask = &orion_xor_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(64), + .platform_data = &orion_xor11_data, + }, +}; + +void __init orion_xor1_init(unsigned long mapbase_low, + unsigned long mapbase_high, + unsigned long irq_0, + unsigned long irq_1) +{ + orion_xor1_shared_resources[0].start = mapbase_low; + orion_xor1_shared_resources[0].end = mapbase_low + 0xff; + orion_xor1_shared_resources[1].start = mapbase_high; + orion_xor1_shared_resources[1].end = mapbase_high + 0xff; + + orion_xor10_resources[0].start = irq_0; + orion_xor10_resources[0].end = irq_0; + orion_xor11_resources[0].start = irq_1; + orion_xor11_resources[0].end = irq_1; + + platform_device_register(&orion_xor1_shared); + + orion_xor_init_channels(&orion_xor10_data, &orion_xor10_channel, + &orion_xor11_data, &orion_xor11_channel); +} + +/***************************************************************************** + * EHCI + ****************************************************************************/ +static struct orion_ehci_data orion_ehci_data = { + .phy_version = EHCI_PHY_NA, +}; + +static u64 ehci_dmamask = DMA_BIT_MASK(32); + + +/***************************************************************************** + * EHCI0 + ****************************************************************************/ +static struct resource orion_ehci_resources[2]; + +static struct platform_device orion_ehci = { + .name = "orion-ehci", + .id = 0, + .dev = { + .dma_mask = &ehci_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &orion_ehci_data, + }, +}; + +void __init orion_ehci_init(struct mbus_dram_target_info *mbus_dram_info, + unsigned long mapbase, + unsigned long irq) +{ + orion_ehci_data.dram = mbus_dram_info; + fill_resources(&orion_ehci, orion_ehci_resources, mapbase, SZ_4K - 1, + irq); + + platform_device_register(&orion_ehci); +} + +/***************************************************************************** + * EHCI1 + ****************************************************************************/ +static struct resource orion_ehci_1_resources[2]; + +static struct platform_device orion_ehci_1 = { + .name = "orion-ehci", + .id = 1, + .dev = { + .dma_mask = &ehci_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &orion_ehci_data, + }, +}; + +void __init orion_ehci_1_init(struct mbus_dram_target_info *mbus_dram_info, + unsigned long mapbase, + unsigned long irq) +{ + orion_ehci_data.dram = mbus_dram_info; + fill_resources(&orion_ehci_1, orion_ehci_1_resources, + mapbase, SZ_4K - 1, irq); + + platform_device_register(&orion_ehci_1); +} + +/***************************************************************************** + * EHCI2 + ****************************************************************************/ +static struct resource orion_ehci_2_resources[2]; + +static struct platform_device orion_ehci_2 = { + .name = "orion-ehci", + .id = 2, + .dev = { + .dma_mask = &ehci_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &orion_ehci_data, + }, +}; + +void __init orion_ehci_2_init(struct mbus_dram_target_info *mbus_dram_info, + unsigned long mapbase, + unsigned long irq) +{ + orion_ehci_data.dram = mbus_dram_info; + fill_resources(&orion_ehci_2, orion_ehci_2_resources, + mapbase, SZ_4K - 1, irq); + + platform_device_register(&orion_ehci_2); +} + +/***************************************************************************** + * SATA + ****************************************************************************/ +static struct resource orion_sata_resources[2] = { + { + .name = "sata base", + }, { + .name = "sata irq", + }, +}; + +static struct platform_device orion_sata = { + .name = "sata_mv", + .id = 0, + .dev = { + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +void __init orion_sata_init(struct mv_sata_platform_data *sata_data, + struct mbus_dram_target_info *mbus_dram_info, + unsigned long mapbase, + unsigned long irq) +{ + sata_data->dram = mbus_dram_info; + orion_sata.dev.platform_data = sata_data; + fill_resources(&orion_sata, orion_sata_resources, + mapbase, 0x5000 - 1, irq); + + platform_device_register(&orion_sata); +} + +/***************************************************************************** + * Cryptographic Engines and Security Accelerator (CESA) + ****************************************************************************/ +static struct resource orion_crypto_resources[] = { + { + .name = "regs", + }, { + .name = "crypto interrupt", + }, { + .name = "sram", + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device orion_crypto = { + .name = "mv_crypto", + .id = -1, +}; + +void __init orion_crypto_init(unsigned long mapbase, + unsigned long srambase, + unsigned long sram_size, + unsigned long irq) +{ + fill_resources(&orion_crypto, orion_crypto_resources, + mapbase, 0xffff, irq); + orion_crypto.num_resources = 3; + orion_crypto_resources[2].start = srambase; + orion_crypto_resources[2].end = srambase + sram_size - 1; + + platform_device_register(&orion_crypto); +} diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c index a431a13..5b4fffa 100644 --- a/arch/arm/plat-orion/gpio.c +++ b/arch/arm/plat-orion/gpio.c @@ -321,59 +321,16 @@ EXPORT_SYMBOL(orion_gpio_set_blink); * polarity LEVEL mask * ****************************************************************************/ -static void gpio_irq_ack(struct irq_data *d) -{ - struct orion_gpio_chip *ochip = irq_data_get_irq_chip_data(d); - int type = irqd_get_trigger_type(d); - - if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) { - int pin = d->irq - ochip->secondary_irq_base; - - writel(~(1 << pin), GPIO_EDGE_CAUSE(ochip)); - } -} - -static void gpio_irq_mask(struct irq_data *d) -{ - struct orion_gpio_chip *ochip = irq_data_get_irq_chip_data(d); - int type = irqd_get_trigger_type(d); - void __iomem *reg; - int pin; - - if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) - reg = GPIO_EDGE_MASK(ochip); - else - reg = GPIO_LEVEL_MASK(ochip); - - pin = d->irq - ochip->secondary_irq_base; - - writel(readl(reg) & ~(1 << pin), reg); -} - -static void gpio_irq_unmask(struct irq_data *d) -{ - struct orion_gpio_chip *ochip = irq_data_get_irq_chip_data(d); - int type = irqd_get_trigger_type(d); - void __iomem *reg; - int pin; - - if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) - reg = GPIO_EDGE_MASK(ochip); - else - reg = GPIO_LEVEL_MASK(ochip); - - pin = d->irq - ochip->secondary_irq_base; - - writel(readl(reg) | (1 << pin), reg); -} static int gpio_irq_set_type(struct irq_data *d, u32 type) { - struct orion_gpio_chip *ochip = irq_data_get_irq_chip_data(d); + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct irq_chip_type *ct = irq_data_get_chip_type(d); + struct orion_gpio_chip *ochip = gc->private; int pin; u32 u; - pin = d->irq - ochip->secondary_irq_base; + pin = d->irq - gc->irq_base; u = readl(GPIO_IO_CONF(ochip)) & (1 << pin); if (!u) { @@ -382,18 +339,14 @@ static int gpio_irq_set_type(struct irq_data *d, u32 type) return -EINVAL; } - /* - * Set edge/level type. - */ - if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) { - __irq_set_handler_locked(d->irq, handle_edge_irq); - } else if (type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) { - __irq_set_handler_locked(d->irq, handle_level_irq); - } else { - printk(KERN_ERR "failed to set irq=%d (type=%d)\n", - d->irq, type); + type &= IRQ_TYPE_SENSE_MASK; + if (type == IRQ_TYPE_NONE) return -EINVAL; - } + + /* Check if we need to change chip and handler */ + if (!(ct->type & type)) + if (irq_setup_alt_chip(d, type)) + return -EINVAL; /* * Configure interrupt polarity. @@ -425,19 +378,12 @@ static int gpio_irq_set_type(struct irq_data *d, u32 type) return 0; } -struct irq_chip orion_gpio_irq_chip = { - .name = "orion_gpio_irq", - .irq_ack = gpio_irq_ack, - .irq_mask = gpio_irq_mask, - .irq_unmask = gpio_irq_unmask, - .irq_set_type = gpio_irq_set_type, -}; - void __init orion_gpio_init(int gpio_base, int ngpio, u32 base, int mask_offset, int secondary_irq_base) { struct orion_gpio_chip *ochip; - int i; + struct irq_chip_generic *gc; + struct irq_chip_type *ct; if (orion_gpio_chip_count == ARRAY_SIZE(orion_gpio_chips)) return; @@ -471,15 +417,29 @@ void __init orion_gpio_init(int gpio_base, int ngpio, writel(0, GPIO_EDGE_MASK(ochip)); writel(0, GPIO_LEVEL_MASK(ochip)); - for (i = 0; i < ngpio; i++) { - unsigned int irq = secondary_irq_base + i; - - irq_set_chip_and_handler(irq, &orion_gpio_irq_chip, - handle_level_irq); - irq_set_chip_data(irq, ochip); - irq_set_status_flags(irq, IRQ_LEVEL); - set_irq_flags(irq, IRQF_VALID); - } + gc = irq_alloc_generic_chip("orion_gpio_irq", 2, secondary_irq_base, + ochip->base, handle_level_irq); + gc->private = ochip; + + ct = gc->chip_types; + ct->regs.mask = ochip->mask_offset + GPIO_LEVEL_MASK_OFF; + ct->type = IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW; + ct->chip.irq_mask = irq_gc_mask_clr_bit; + ct->chip.irq_unmask = irq_gc_mask_set_bit; + ct->chip.irq_set_type = gpio_irq_set_type; + + ct++; + ct->regs.mask = ochip->mask_offset + GPIO_EDGE_MASK_OFF; + ct->regs.ack = GPIO_EDGE_CAUSE_OFF; + ct->type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; + ct->chip.irq_ack = irq_gc_ack; + ct->chip.irq_mask = irq_gc_mask_clr_bit; + ct->chip.irq_unmask = irq_gc_mask_set_bit; + ct->chip.irq_set_type = gpio_irq_set_type; + ct->handler = handle_edge_irq; + + irq_setup_generic_chip(gc, IRQ_MSK(ngpio), IRQ_GC_INIT_MASK_CACHE, + IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE); } void orion_gpio_irq_handler(int pinoff) diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h new file mode 100644 index 0000000..a63c357 --- /dev/null +++ b/arch/arm/plat-orion/include/plat/common.h @@ -0,0 +1,117 @@ +/* + * arch/arm/plat-orion/include/plat/common.h + * + * Marvell Orion SoC common setup code used by different mach-/common.c + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __PLAT_COMMON_H +#include <linux/mv643xx_eth.h> + +struct dsa_platform_data; + +void __init orion_uart0_init(unsigned int membase, + resource_size_t mapbase, + unsigned int irq, + unsigned int uartclk); + +void __init orion_uart1_init(unsigned int membase, + resource_size_t mapbase, + unsigned int irq, + unsigned int uartclk); + +void __init orion_uart2_init(unsigned int membase, + resource_size_t mapbase, + unsigned int irq, + unsigned int uartclk); + +void __init orion_uart3_init(unsigned int membase, + resource_size_t mapbase, + unsigned int irq, + unsigned int uartclk); + +void __init orion_rtc_init(unsigned long mapbase, + unsigned long irq); + +void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data, + struct mbus_dram_target_info *mbus_dram_info, + unsigned long mapbase, + unsigned long irq, + unsigned long irq_err, + int tclk); + +void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data, + struct mbus_dram_target_info *mbus_dram_info, + unsigned long mapbase, + unsigned long irq, + unsigned long irq_err, + int tclk); + +void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data, + struct mbus_dram_target_info *mbus_dram_info, + unsigned long mapbase, + unsigned long irq, + unsigned long irq_err, + int tclk); + +void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data, + struct mbus_dram_target_info *mbus_dram_info, + unsigned long mapbase, + unsigned long irq, + unsigned long irq_err, + int tclk); + +void __init orion_ge00_switch_init(struct dsa_platform_data *d, + int irq); +void __init orion_i2c_init(unsigned long mapbase, + unsigned long irq, + unsigned long freq_m); + +void __init orion_i2c_1_init(unsigned long mapbase, + unsigned long irq, + unsigned long freq_m); + +void __init orion_spi_init(unsigned long mapbase, + unsigned long tclk); + +void __init orion_spi_1_init(unsigned long mapbase, + unsigned long tclk); + +void __init orion_wdt_init(unsigned long tclk); + +void __init orion_xor0_init(struct mbus_dram_target_info *mbus_dram_info, + unsigned long mapbase_low, + unsigned long mapbase_high, + unsigned long irq_0, + unsigned long irq_1); + +void __init orion_xor1_init(unsigned long mapbase_low, + unsigned long mapbase_high, + unsigned long irq_0, + unsigned long irq_1); + +void __init orion_ehci_init(struct mbus_dram_target_info *mbus_dram_info, + unsigned long mapbase, + unsigned long irq); + +void __init orion_ehci_1_init(struct mbus_dram_target_info *mbus_dram_info, + unsigned long mapbase, + unsigned long irq); + +void __init orion_ehci_2_init(struct mbus_dram_target_info *mbus_dram_info, + unsigned long mapbase, + unsigned long irq); + +void __init orion_sata_init(struct mv_sata_platform_data *sata_data, + struct mbus_dram_target_info *mbus_dram_info, + unsigned long mapbase, + unsigned long irq); + +void __init orion_crypto_init(unsigned long mapbase, + unsigned long srambase, + unsigned long sram_size, + unsigned long irq); +#endif diff --git a/arch/arm/plat-orion/include/plat/gpio.h b/arch/arm/plat-orion/include/plat/gpio.h index 5578b98..3075b9f 100644 --- a/arch/arm/plat-orion/include/plat/gpio.h +++ b/arch/arm/plat-orion/include/plat/gpio.h @@ -39,7 +39,6 @@ void __init orion_gpio_init(int gpio_base, int ngpio, /* * GPIO interrupt handling. */ -extern struct irq_chip orion_gpio_irq_chip; void orion_gpio_irq_handler(int irqoff); diff --git a/arch/arm/plat-orion/include/plat/mpp.h b/arch/arm/plat-orion/include/plat/mpp.h new file mode 100644 index 0000000..723adce --- /dev/null +++ b/arch/arm/plat-orion/include/plat/mpp.h @@ -0,0 +1,34 @@ +/* + * arch/arm/plat-orion/include/plat/mpp.h + * + * Marvell Orion SoC MPP handling. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __PLAT_MPP_H +#define __PLAT_MPP_H + +#define MPP_NUM(x) ((x) & 0xff) +#define MPP_SEL(x) (((x) >> 8) & 0xf) + +/* This is the generic MPP macro, without any variant information. + Each machine architecture is expected to extend this with further + bit fields indicating which MPP configurations are valid for a + specific variant. */ + +#define GENERIC_MPP(_num, _sel, _in, _out) ( \ + /* MPP number */ ((_num) & 0xff) | \ + /* MPP select value */ (((_sel) & 0xf) << 8) | \ + /* may be input signal */ ((!!(_in)) << 12) | \ + /* may be output signal */ ((!!(_out)) << 13)) + +#define MPP_INPUT_MASK GENERIC_MPP(0, 0x0, 1, 0) +#define MPP_OUTPUT_MASK GENERIC_MPP(0, 0x0, 0, 1) + +void __init orion_mpp_conf(unsigned int *mpp_list, unsigned int variant_mask, + unsigned int mpp_max, unsigned int dev_bus); + +#endif diff --git a/arch/arm/plat-orion/irq.c b/arch/arm/plat-orion/irq.c index d8d638e..2d5b9c1 100644 --- a/arch/arm/plat-orion/irq.c +++ b/arch/arm/plat-orion/irq.c @@ -14,52 +14,21 @@ #include <linux/io.h> #include <plat/irq.h> -static void orion_irq_mask(struct irq_data *d) -{ - void __iomem *maskaddr = irq_data_get_irq_chip_data(d); - u32 mask; - - mask = readl(maskaddr); - mask &= ~(1 << (d->irq & 31)); - writel(mask, maskaddr); -} - -static void orion_irq_unmask(struct irq_data *d) -{ - void __iomem *maskaddr = irq_data_get_irq_chip_data(d); - u32 mask; - - mask = readl(maskaddr); - mask |= 1 << (d->irq & 31); - writel(mask, maskaddr); -} - -static struct irq_chip orion_irq_chip = { - .name = "orion_irq", - .irq_mask = orion_irq_mask, - .irq_mask_ack = orion_irq_mask, - .irq_unmask = orion_irq_unmask, -}; - void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr) { - unsigned int i; + struct irq_chip_generic *gc; + struct irq_chip_type *ct; /* * Mask all interrupts initially. */ writel(0, maskaddr); - /* - * Register IRQ sources. - */ - for (i = 0; i < 32; i++) { - unsigned int irq = irq_start + i; - - irq_set_chip_and_handler(irq, &orion_irq_chip, - handle_level_irq); - irq_set_chip_data(irq, maskaddr); - irq_set_status_flags(irq, IRQ_LEVEL); - set_irq_flags(irq, IRQF_VALID); - } + gc = irq_alloc_generic_chip("orion_irq", 1, irq_start, maskaddr, + handle_level_irq); + ct = gc->chip_types; + ct->chip.irq_mask = irq_gc_mask_clr_bit; + ct->chip.irq_unmask = irq_gc_mask_set_bit; + irq_setup_generic_chip(gc, IRQ_MSK(32), IRQ_GC_INIT_MASK_CACHE, + IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE); } diff --git a/arch/arm/plat-orion/mpp.c b/arch/arm/plat-orion/mpp.c new file mode 100644 index 0000000..9155343 --- /dev/null +++ b/arch/arm/plat-orion/mpp.c @@ -0,0 +1,78 @@ +/* + * arch/arm/plat-orion/mpp.c + * + * MPP functions for Marvell orion SoCs + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mbus.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <mach/hardware.h> +#include <plat/mpp.h> + +/* Address of the ith MPP control register */ +static __init unsigned long mpp_ctrl_addr(unsigned int i, + unsigned long dev_bus) +{ + return dev_bus + (i) * 4; +} + + +void __init orion_mpp_conf(unsigned int *mpp_list, unsigned int variant_mask, + unsigned int mpp_max, unsigned int dev_bus) +{ + unsigned int mpp_nr_regs = (1 + mpp_max/8); + u32 mpp_ctrl[mpp_nr_regs]; + int i; + + printk(KERN_DEBUG "initial MPP regs:"); + for (i = 0; i < mpp_nr_regs; i++) { + mpp_ctrl[i] = readl(mpp_ctrl_addr(i, dev_bus)); + printk(" %08x", mpp_ctrl[i]); + } + printk("\n"); + + for ( ; *mpp_list; mpp_list++) { + unsigned int num = MPP_NUM(*mpp_list); + unsigned int sel = MPP_SEL(*mpp_list); + int shift, gpio_mode; + + if (num > mpp_max) { + printk(KERN_ERR "orion_mpp_conf: invalid MPP " + "number (%u)\n", num); + continue; + } + if (variant_mask & !(*mpp_list & variant_mask)) { + printk(KERN_WARNING + "orion_mpp_conf: requested MPP%u config " + "unavailable on this hardware\n", num); + continue; + } + + shift = (num & 7) << 2; + mpp_ctrl[num / 8] &= ~(0xf << shift); + mpp_ctrl[num / 8] |= sel << shift; + + gpio_mode = 0; + if (*mpp_list & MPP_INPUT_MASK) + gpio_mode |= GPIO_INPUT_OK; + if (*mpp_list & MPP_OUTPUT_MASK) + gpio_mode |= GPIO_OUTPUT_OK; + if (sel != 0) + gpio_mode = 0; + orion_gpio_set_valid(num, gpio_mode); + } + + printk(KERN_DEBUG " final MPP regs:"); + for (i = 0; i < mpp_nr_regs; i++) { + writel(mpp_ctrl[i], mpp_ctrl_addr(i, dev_bus)); + printk(" %08x", mpp_ctrl[i]); + } + printk("\n"); +} diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c index cd6d67c..135abda 100644 --- a/arch/arm/plat-s5p/irq-gpioint.c +++ b/arch/arm/plat-s5p/irq-gpioint.c @@ -41,72 +41,11 @@ struct s5p_gpioint_bank { LIST_HEAD(banks); -static int s5p_gpioint_get_offset(struct irq_data *data) +static int s5p_gpioint_set_type(struct irq_data *d, unsigned int type) { - struct s3c_gpio_chip *chip = irq_data_get_irq_handler_data(data); - return data->irq - chip->irq_base; -} - -static void s5p_gpioint_ack(struct irq_data *data) -{ - struct s3c_gpio_chip *chip = irq_data_get_irq_handler_data(data); - int group, offset, pend_offset; - unsigned int value; - - group = chip->group; - offset = s5p_gpioint_get_offset(data); - pend_offset = REG_OFFSET(group); - - value = __raw_readl(GPIO_BASE(chip) + PEND_OFFSET + pend_offset); - value |= BIT(offset); - __raw_writel(value, GPIO_BASE(chip) + PEND_OFFSET + pend_offset); -} - -static void s5p_gpioint_mask(struct irq_data *data) -{ - struct s3c_gpio_chip *chip = irq_data_get_irq_handler_data(data); - int group, offset, mask_offset; - unsigned int value; - - group = chip->group; - offset = s5p_gpioint_get_offset(data); - mask_offset = REG_OFFSET(group); - - value = __raw_readl(GPIO_BASE(chip) + MASK_OFFSET + mask_offset); - value |= BIT(offset); - __raw_writel(value, GPIO_BASE(chip) + MASK_OFFSET + mask_offset); -} - -static void s5p_gpioint_unmask(struct irq_data *data) -{ - struct s3c_gpio_chip *chip = irq_data_get_irq_handler_data(data); - int group, offset, mask_offset; - unsigned int value; - - group = chip->group; - offset = s5p_gpioint_get_offset(data); - mask_offset = REG_OFFSET(group); - - value = __raw_readl(GPIO_BASE(chip) + MASK_OFFSET + mask_offset); - value &= ~BIT(offset); - __raw_writel(value, GPIO_BASE(chip) + MASK_OFFSET + mask_offset); -} - -static void s5p_gpioint_mask_ack(struct irq_data *data) -{ - s5p_gpioint_mask(data); - s5p_gpioint_ack(data); -} - -static int s5p_gpioint_set_type(struct irq_data *data, unsigned int type) -{ - struct s3c_gpio_chip *chip = irq_data_get_irq_handler_data(data); - int group, offset, con_offset; - unsigned int value; - - group = chip->group; - offset = s5p_gpioint_get_offset(data); - con_offset = REG_OFFSET(group); + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct irq_chip_type *ct = gc->chip_types; + unsigned int shift = (d->irq - gc->irq_base) << 2; switch (type) { case IRQ_TYPE_EDGE_RISING: @@ -130,23 +69,12 @@ static int s5p_gpioint_set_type(struct irq_data *data, unsigned int type) return -EINVAL; } - value = __raw_readl(GPIO_BASE(chip) + CON_OFFSET + con_offset); - value &= ~(0x7 << (offset * 0x4)); - value |= (type << (offset * 0x4)); - __raw_writel(value, GPIO_BASE(chip) + CON_OFFSET + con_offset); - + gc->type_cache &= ~(0x7 << shift); + gc->type_cache |= type << shift; + writel(gc->type_cache, gc->reg_base + ct->regs.type); return 0; } -static struct irq_chip s5p_gpioint = { - .name = "s5p_gpioint", - .irq_ack = s5p_gpioint_ack, - .irq_mask = s5p_gpioint_mask, - .irq_mask_ack = s5p_gpioint_mask_ack, - .irq_unmask = s5p_gpioint_unmask, - .irq_set_type = s5p_gpioint_set_type, -}; - static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc) { struct s5p_gpioint_bank *bank = irq_get_handler_data(irq); @@ -179,9 +107,10 @@ static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc) static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip) { static int used_gpioint_groups = 0; - int irq, group = chip->group; - int i; + int group = chip->group; struct s5p_gpioint_bank *bank = NULL; + struct irq_chip_generic *gc; + struct irq_chip_type *ct; if (used_gpioint_groups >= S5P_GPIOINT_GROUP_COUNT) return -ENOMEM; @@ -211,19 +140,28 @@ static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip) * chained GPIO irq has been successfully registered, allocate new gpio * int group and assign irq nubmers */ - chip->irq_base = S5P_GPIOINT_BASE + used_gpioint_groups * S5P_GPIOINT_GROUP_SIZE; used_gpioint_groups++; bank->chips[group - bank->start] = chip; - for (i = 0; i < chip->chip.ngpio; i++) { - irq = chip->irq_base + i; - irq_set_chip(irq, &s5p_gpioint); - irq_set_handler_data(irq, chip); - irq_set_handler(irq, handle_level_irq); - set_irq_flags(irq, IRQF_VALID); - } + + gc = irq_alloc_generic_chip("s5p_gpioint", 1, chip->irq_base, + (void __iomem *)GPIO_BASE(chip), + handle_level_irq); + if (!gc) + return -ENOMEM; + ct = gc->chip_types; + ct->chip.irq_ack = irq_gc_ack; + ct->chip.irq_mask = irq_gc_mask_set_bit; + ct->chip.irq_unmask = irq_gc_mask_clr_bit; + ct->chip.irq_set_type = s5p_gpioint_set_type, + ct->regs.ack = PEND_OFFSET + REG_OFFSET(chip->group); + ct->regs.mask = MASK_OFFSET + REG_OFFSET(chip->group); + ct->regs.type = CON_OFFSET + REG_OFFSET(chip->group); + irq_setup_generic_chip(gc, IRQ_MSK(chip->chip.ngpio), + IRQ_GC_INIT_MASK_CACHE, + IRQ_NOREQUEST | IRQ_NOPROBE, 0); return 0; } diff --git a/arch/arm/plat-s5p/irq.c b/arch/arm/plat-s5p/irq.c index 5560b12..a97c089 100644 --- a/arch/arm/plat-s5p/irq.c +++ b/arch/arm/plat-s5p/irq.c @@ -64,11 +64,7 @@ void __init s5p_init_irq(u32 *vic, u32 num_vic) vic_init(VA_VIC(irq), VIC_BASE(irq), vic[irq], 0); #endif - s3c_init_vic_timer_irq(IRQ_TIMER0_VIC, IRQ_TIMER0); - s3c_init_vic_timer_irq(IRQ_TIMER1_VIC, IRQ_TIMER1); - s3c_init_vic_timer_irq(IRQ_TIMER2_VIC, IRQ_TIMER2); - s3c_init_vic_timer_irq(IRQ_TIMER3_VIC, IRQ_TIMER3); - s3c_init_vic_timer_irq(IRQ_TIMER4_VIC, IRQ_TIMER4); + s3c_init_vic_timer_irq(5, IRQ_TIMER0); s3c_init_uart_irqs(uart_irqs, ARRAY_SIZE(uart_irqs)); } diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index be72100..4d79519 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -8,6 +8,7 @@ config PLAT_SAMSUNG bool depends on PLAT_S3C24XX || ARCH_S3C64XX || PLAT_S5P select NO_IOPORT + select GENERIC_IRQ_CHIP default y help Base platform code for all Samsung SoC based systems diff --git a/arch/arm/plat-samsung/include/plat/irq-vic-timer.h b/arch/arm/plat-samsung/include/plat/irq-vic-timer.h index a90b534..5b9c42f 100644 --- a/arch/arm/plat-samsung/include/plat/irq-vic-timer.h +++ b/arch/arm/plat-samsung/include/plat/irq-vic-timer.h @@ -10,4 +10,4 @@ * published by the Free Software Foundation. */ -extern void s3c_init_vic_timer_irq(unsigned int vic, unsigned int timer); +extern void s3c_init_vic_timer_irq(unsigned int num, unsigned int timer_irq); diff --git a/arch/arm/plat-samsung/include/plat/uncompress.h b/arch/arm/plat-samsung/include/plat/uncompress.h index 7d6ed72..ee48e12 100644 --- a/arch/arm/plat-samsung/include/plat/uncompress.h +++ b/arch/arm/plat-samsung/include/plat/uncompress.h @@ -18,8 +18,8 @@ typedef unsigned int upf_t; /* cannot include linux/serial_core.h */ /* uart setup */ -static unsigned int fifo_mask; -static unsigned int fifo_max; +unsigned int fifo_mask; +unsigned int fifo_max; /* forward declerations */ diff --git a/arch/arm/plat-samsung/irq-uart.c b/arch/arm/plat-samsung/irq-uart.c index 4d4e571..32582c0 100644 --- a/arch/arm/plat-samsung/irq-uart.c +++ b/arch/arm/plat-samsung/irq-uart.c @@ -27,60 +27,6 @@ /* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3] * are consecutive when looking up the interrupt in the demux routines. */ - -static inline void __iomem *s3c_irq_uart_base(struct irq_data *data) -{ - struct s3c_uart_irq *uirq = irq_data_get_irq_chip_data(data); - return uirq->regs; -} - -static inline unsigned int s3c_irq_uart_bit(unsigned int irq) -{ - return irq & 3; -} - -static void s3c_irq_uart_mask(struct irq_data *data) -{ - void __iomem *regs = s3c_irq_uart_base(data); - unsigned int bit = s3c_irq_uart_bit(data->irq); - u32 reg; - - reg = __raw_readl(regs + S3C64XX_UINTM); - reg |= (1 << bit); - __raw_writel(reg, regs + S3C64XX_UINTM); -} - -static void s3c_irq_uart_maskack(struct irq_data *data) -{ - void __iomem *regs = s3c_irq_uart_base(data); - unsigned int bit = s3c_irq_uart_bit(data->irq); - u32 reg; - - reg = __raw_readl(regs + S3C64XX_UINTM); - reg |= (1 << bit); - __raw_writel(reg, regs + S3C64XX_UINTM); - __raw_writel(1 << bit, regs + S3C64XX_UINTP); -} - -static void s3c_irq_uart_unmask(struct irq_data *data) -{ - void __iomem *regs = s3c_irq_uart_base(data); - unsigned int bit = s3c_irq_uart_bit(data->irq); - u32 reg; - - reg = __raw_readl(regs + S3C64XX_UINTM); - reg &= ~(1 << bit); - __raw_writel(reg, regs + S3C64XX_UINTM); -} - -static void s3c_irq_uart_ack(struct irq_data *data) -{ - void __iomem *regs = s3c_irq_uart_base(data); - unsigned int bit = s3c_irq_uart_bit(data->irq); - - __raw_writel(1 << bit, regs + S3C64XX_UINTP); -} - static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc) { struct s3c_uart_irq *uirq = desc->irq_data.handler_data; @@ -97,30 +43,25 @@ static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc) generic_handle_irq(base + 3); } -static struct irq_chip s3c_irq_uart = { - .name = "s3c-uart", - .irq_mask = s3c_irq_uart_mask, - .irq_unmask = s3c_irq_uart_unmask, - .irq_mask_ack = s3c_irq_uart_maskack, - .irq_ack = s3c_irq_uart_ack, -}; - static void __init s3c_init_uart_irq(struct s3c_uart_irq *uirq) { void __iomem *reg_base = uirq->regs; - unsigned int irq; - int offs; + struct irq_chip_generic *gc; + struct irq_chip_type *ct; /* mask all interrupts at the start. */ __raw_writel(0xf, reg_base + S3C64XX_UINTM); - for (offs = 0; offs < 3; offs++) { - irq = uirq->base_irq + offs; - - irq_set_chip_and_handler(irq, &s3c_irq_uart, handle_level_irq); - irq_set_chip_data(irq, uirq); - set_irq_flags(irq, IRQF_VALID); - } + gc = irq_alloc_generic_chip("s3c-uart", 1, uirq->base_irq, reg_base, + handle_level_irq); + ct = gc->chip_types; + ct->chip.irq_ack = irq_gc_ack; + ct->chip.irq_mask = irq_gc_mask_set_bit; + ct->chip.irq_unmask = irq_gc_mask_clr_bit; + ct->regs.ack = S3C64XX_UINTP; + ct->regs.mask = S3C64XX_UINTM; + irq_setup_generic_chip(gc, IRQ_MSK(4), IRQ_GC_INIT_MASK_CACHE, + IRQ_NOREQUEST | IRQ_NOPROBE, 0); irq_set_handler_data(uirq->parent_irq, uirq); irq_set_chained_handler(uirq->parent_irq, s3c_irq_demux_uart); diff --git a/arch/arm/plat-samsung/irq-vic-timer.c b/arch/arm/plat-samsung/irq-vic-timer.c index d6ad66a..a607546 100644 --- a/arch/arm/plat-samsung/irq-vic-timer.c +++ b/arch/arm/plat-samsung/irq-vic-timer.c @@ -28,60 +28,43 @@ static void s3c_irq_demux_vic_timer(unsigned int irq, struct irq_desc *desc) } /* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */ - -static void s3c_irq_timer_mask(struct irq_data *data) -{ - u32 reg = __raw_readl(S3C64XX_TINT_CSTAT); - u32 mask = (u32)data->chip_data; - - reg &= 0x1f; /* mask out pending interrupts */ - reg &= ~mask; - __raw_writel(reg, S3C64XX_TINT_CSTAT); -} - -static void s3c_irq_timer_unmask(struct irq_data *data) +static void s3c_irq_timer_ack(struct irq_data *d) { - u32 reg = __raw_readl(S3C64XX_TINT_CSTAT); - u32 mask = (u32)data->chip_data; + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + u32 mask = (1 << 5) << (d->irq - gc->irq_base); - reg &= 0x1f; /* mask out pending interrupts */ - reg |= mask; - __raw_writel(reg, S3C64XX_TINT_CSTAT); + irq_reg_writel(mask | gc->mask_cache, gc->reg_base); } -static void s3c_irq_timer_ack(struct irq_data *data) -{ - u32 reg = __raw_readl(S3C64XX_TINT_CSTAT); - u32 mask = (u32)data->chip_data; - - reg &= 0x1f; - reg |= mask << 5; - __raw_writel(reg, S3C64XX_TINT_CSTAT); -} - -static struct irq_chip s3c_irq_timer = { - .name = "s3c-timer", - .irq_mask = s3c_irq_timer_mask, - .irq_unmask = s3c_irq_timer_unmask, - .irq_ack = s3c_irq_timer_ack, -}; - /** * s3c_init_vic_timer_irq() - initialise timer irq chanined off VIC.\ - * @parent_irq: The parent IRQ on the VIC for the timer. - * @timer_irq: The IRQ to be used for the timer. + * @num: Number of timers to initialize + * @timer_irq: Base IRQ number to be used for the timers. * * Register the necessary IRQ chaining and support for the timer IRQs * chained of the VIC. */ -void __init s3c_init_vic_timer_irq(unsigned int parent_irq, - unsigned int timer_irq) +void __init s3c_init_vic_timer_irq(unsigned int num, unsigned int timer_irq) { + unsigned int pirq[5] = { IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC, + IRQ_TIMER3_VIC, IRQ_TIMER4_VIC }; + struct irq_chip_generic *s3c_tgc; + struct irq_chip_type *ct; + unsigned int i; - irq_set_chained_handler(parent_irq, s3c_irq_demux_vic_timer); - irq_set_handler_data(parent_irq, (void *)timer_irq); + s3c_tgc = irq_alloc_generic_chip("s3c-timer", 1, timer_irq, + S3C64XX_TINT_CSTAT, handle_level_irq); + ct = s3c_tgc->chip_types; + ct->chip.irq_mask = irq_gc_mask_clr_bit; + ct->chip.irq_unmask = irq_gc_mask_set_bit; + ct->chip.irq_ack = s3c_irq_timer_ack; + irq_setup_generic_chip(s3c_tgc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE, + IRQ_NOREQUEST | IRQ_NOPROBE, 0); + /* Clear the upper bits of the mask_cache*/ + s3c_tgc->mask_cache &= 0x1f; - irq_set_chip_and_handler(timer_irq, &s3c_irq_timer, handle_level_irq); - irq_set_chip_data(timer_irq, (void *)(1 << (timer_irq - IRQ_TIMER0))); - set_irq_flags(timer_irq, IRQF_VALID); + for (i = 0; i < num; i++, timer_irq++) { + irq_set_chained_handler(pirq[i], s3c_irq_demux_vic_timer); + irq_set_handler_data(pirq[i], (void *)timer_irq); + } } |