summaryrefslogtreecommitdiff
path: root/arch/arm
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/boot/compressed/head.S6
-rw-r--r--arch/arm/configs/davinci_all_defconfig2
-rw-r--r--arch/arm/configs/netx_defconfig2
-rw-r--r--arch/arm/configs/viper_defconfig2
-rw-r--r--arch/arm/configs/xcep_defconfig2
-rw-r--r--arch/arm/configs/zeus_defconfig2
-rw-r--r--arch/arm/kernel/devtree.c3
-rw-r--r--arch/arm/kernel/entry-armv.S6
-rw-r--r--arch/arm/kernel/entry-common.S2
-rw-r--r--arch/arm/kernel/traps.c4
-rw-r--r--arch/arm/mach-davinci/devices-da8xx.c2
-rw-r--r--arch/arm/mach-davinci/devices.c2
-rw-r--r--arch/arm/mach-davinci/gpio.c7
-rw-r--r--arch/arm/mach-ep93xx/core.c6
-rw-r--r--arch/arm/mach-exynos4/Kconfig6
-rw-r--r--arch/arm/mach-exynos4/Makefile2
-rw-r--r--arch/arm/mach-exynos4/cpu.c2
-rw-r--r--arch/arm/mach-exynos4/include/mach/regs-usb-phy.h2
-rw-r--r--arch/arm/mach-exynos4/setup-usb-phy.c (renamed from arch/arm/mach-exynos4/usb-phy.c)0
-rw-r--r--arch/arm/mach-exynos4/time.c2
-rw-r--r--arch/arm/mach-footbridge/dc21285-timer.c1
-rw-r--r--arch/arm/mach-footbridge/include/mach/debug-macro.S5
-rw-r--r--arch/arm/mach-msm/timer.c14
-rw-r--r--arch/arm/mach-mxs/ocotp.c2
-rw-r--r--arch/arm/mach-omap1/Makefile4
-rw-r--r--arch/arm/mach-omap1/dma.c11
-rw-r--r--arch/arm/mach-omap1/pm_bus.c8
-rw-r--r--arch/arm/mach-omap2/board-2430sdp.c2
-rw-r--r--arch/arm/mach-omap2/board-3430sdp.c6
-rw-r--r--arch/arm/mach-omap2/board-4430sdp.c11
-rw-r--r--arch/arm/mach-omap2/board-apollon.c2
-rw-r--r--arch/arm/mach-omap2/board-cm-t35.c2
-rw-r--r--arch/arm/mach-omap2/board-cm-t3517.c5
-rw-r--r--arch/arm/mach-omap2/board-devkit8000.c2
-rw-r--r--arch/arm/mach-omap2/board-omap3beagle.c8
-rw-r--r--arch/arm/mach-omap2/board-omap3pandora.c7
-rw-r--r--arch/arm/mach-omap2/board-omap3touchbook.c2
-rw-r--r--arch/arm/mach-omap2/board-omap4panda.c8
-rw-r--r--arch/arm/mach-omap2/board-overo.c4
-rw-r--r--arch/arm/mach-omap2/board-rx51-peripherals.c3
-rw-r--r--arch/arm/mach-omap2/board-zoom-display.c2
-rw-r--r--arch/arm/mach-omap2/common-board-devices.c20
-rw-r--r--arch/arm/mach-omap2/common-board-devices.h2
-rw-r--r--arch/arm/mach-omap2/devices.c2
-rw-r--r--arch/arm/mach-omap2/hsmmc.c16
-rw-r--r--arch/arm/mach-omap2/hsmmc.h1
-rw-r--r--arch/arm/mach-omap2/mux.c5
-rw-r--r--arch/arm/mach-omap2/mux.h6
-rw-r--r--arch/arm/mach-omap2/mux44xx.c5
-rw-r--r--arch/arm/mach-omap2/omap_hwmod.c2
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_44xx_data.c2
-rw-r--r--arch/arm/mach-omap2/omap_phy_internal.c4
-rw-r--r--arch/arm/mach-omap2/pm-debug.c4
-rw-r--r--arch/arm/mach-pxa/spitz_pm.c1
-rw-r--r--arch/arm/mach-s3c2410/Makefile1
-rw-r--r--arch/arm/mach-s3c2410/irq.c34
-rw-r--r--arch/arm/mach-s5pv210/cpufreq.c8
-rw-r--r--arch/arm/mach-shmobile/board-ag5evm.c4
-rw-r--r--arch/arm/mach-shmobile/board-mackerel.c208
-rw-r--r--arch/arm/mach-shmobile/intc-sh73a0.c6
-rw-r--r--arch/arm/mach-shmobile/setup-sh7367.c14
-rw-r--r--arch/arm/mach-tegra/board-harmony-power.c4
-rw-r--r--arch/arm/mach-tegra/board-harmony.h3
-rw-r--r--arch/arm/mach-u300/clock.h2
-rw-r--r--arch/arm/mach-u300/include/mach/u300-regs.h22
-rw-r--r--arch/arm/mach-u300/timer.c3
-rw-r--r--arch/arm/mach-ux500/cpu-db8500.c3
-rw-r--r--arch/arm/mach-vexpress/v2m.c15
-rw-r--r--arch/arm/mm/context.c17
-rw-r--r--arch/arm/mm/init.c12
-rw-r--r--arch/arm/mm/proc-arm7tdmi.S2
-rw-r--r--arch/arm/mm/proc-arm9tdmi.S2
-rw-r--r--arch/arm/mm/proc-v7.S10
-rw-r--r--arch/arm/plat-mxc/devices/platform-imx-dma.c6
-rw-r--r--arch/arm/plat-nomadik/include/plat/gpio.h1
-rw-r--r--arch/arm/plat-omap/include/plat/flash.h1
-rw-r--r--arch/arm/plat-omap/include/plat/iovmm.h3
-rw-r--r--arch/arm/plat-omap/include/plat/mmc.h3
-rw-r--r--arch/arm/plat-omap/iovmm.c4
-rw-r--r--arch/arm/plat-omap/omap_device.c19
-rw-r--r--arch/arm/plat-omap/sram.c12
-rw-r--r--arch/arm/plat-s3c24xx/dma.c2
-rw-r--r--arch/arm/plat-s3c24xx/irq.c6
-rw-r--r--arch/arm/plat-s5p/dev-onenand.c12
-rw-r--r--arch/arm/plat-s5p/include/plat/map-s5p.h2
-rw-r--r--arch/arm/plat-samsung/dev-onenand.c12
-rw-r--r--arch/arm/plat-samsung/include/plat/devs.h6
87 files changed, 410 insertions, 290 deletions
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index f9da419..942fad9 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -691,9 +691,9 @@ proc_types:
.word 0x41069260 @ ARM926EJ-S (v5TEJ)
.word 0xff0ffff0
- b __arm926ejs_mmu_cache_on
- b __armv4_mmu_cache_off
- b __armv5tej_mmu_cache_flush
+ W(b) __arm926ejs_mmu_cache_on
+ W(b) __armv4_mmu_cache_off
+ W(b) __armv5tej_mmu_cache_flush
.word 0x00007000 @ ARM7 IDs
.word 0x0000f000
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index 889922a..67b5abb6 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -157,7 +157,7 @@ CONFIG_LEDS_GPIO=m
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_XFS_FS=m
diff --git a/arch/arm/configs/netx_defconfig b/arch/arm/configs/netx_defconfig
index 316af54..9c0ad79 100644
--- a/arch/arm/configs/netx_defconfig
+++ b/arch/arm/configs/netx_defconfig
@@ -60,7 +60,7 @@ CONFIG_FB_ARMCLCD=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
CONFIG_INOTIFY=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig
index 8b0c717..1d01ddd 100644
--- a/arch/arm/configs/viper_defconfig
+++ b/arch/arm/configs/viper_defconfig
@@ -142,7 +142,7 @@ CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_USB_G_PRINTER=m
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_SA1100=m
CONFIG_EXT2_FS=m
diff --git a/arch/arm/configs/xcep_defconfig b/arch/arm/configs/xcep_defconfig
index 5b55041..721832f 100644
--- a/arch/arm/configs/xcep_defconfig
+++ b/arch/arm/configs/xcep_defconfig
@@ -73,7 +73,7 @@ CONFIG_SENSORS_MAX6650=m
# CONFIG_VGA_CONSOLE is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_SA1100=m
CONFIG_DMADEVICES=y
# CONFIG_DNOTIFY is not set
diff --git a/arch/arm/configs/zeus_defconfig b/arch/arm/configs/zeus_defconfig
index 960f655..59577ad 100644
--- a/arch/arm/configs/zeus_defconfig
+++ b/arch/arm/configs/zeus_defconfig
@@ -158,7 +158,7 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_GPIO=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_PXA=m
CONFIG_EXT2_FS=y
diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c
index a701e42..0cdd7b4 100644
--- a/arch/arm/kernel/devtree.c
+++ b/arch/arm/kernel/devtree.c
@@ -76,6 +76,9 @@ struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys)
unsigned long dt_root;
const char *model;
+ if (!dt_phys)
+ return NULL;
+
devtree = phys_to_virt(dt_phys);
/* check device tree validity */
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index e8d8856..90c62cd 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -435,6 +435,10 @@ __irq_usr:
usr_entry
kuser_cmpxchg_check
+#ifdef CONFIG_IRQSOFF_TRACER
+ bl trace_hardirqs_off
+#endif
+
get_thread_info tsk
#ifdef CONFIG_PREEMPT
ldr r8, [tsk, #TI_PREEMPT] @ get preempt count
@@ -453,7 +457,7 @@ __irq_usr:
#endif
mov why, #0
- b ret_to_user
+ b ret_to_user_from_irq
UNWIND(.fnend )
ENDPROC(__irq_usr)
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 1e7b04a..b2a27b6 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -64,6 +64,7 @@ work_resched:
ENTRY(ret_to_user)
ret_slow_syscall:
disable_irq @ disable interrupts
+ENTRY(ret_to_user_from_irq)
ldr r1, [tsk, #TI_FLAGS]
tst r1, #_TIF_WORK_MASK
bne work_pending
@@ -75,6 +76,7 @@ no_work_pending:
arch_ret_to_user r1, lr
restore_user_regs fast = 0, offset = 0
+ENDPROC(ret_to_user_from_irq)
ENDPROC(ret_to_user)
/*
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index d52eec2..6807cb1 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -139,7 +139,7 @@ static void dump_instr(const char *lvl, struct pt_regs *regs)
fs = get_fs();
set_fs(KERNEL_DS);
- for (i = -4; i < 1; i++) {
+ for (i = -4; i < 1 + !!thumb; i++) {
unsigned int val, bad;
if (thumb)
@@ -563,7 +563,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs)
if (!pmd_present(*pmd))
goto bad_access;
pte = pte_offset_map_lock(mm, pmd, addr, &ptl);
- if (!pte_present(*pte) || !pte_dirty(*pte)) {
+ if (!pte_present(*pte) || !pte_write(*pte) || !pte_dirty(*pte)) {
pte_unmap_unlock(pte, ptl);
goto bad_access;
}
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 4e66881..fc4e98e 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -494,7 +494,7 @@ static struct platform_device da850_mcasp_device = {
.resource = da850_mcasp_resources,
};
-struct platform_device davinci_pcm_device = {
+static struct platform_device davinci_pcm_device = {
.name = "davinci-pcm-audio",
.id = -1,
};
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index 8f4f736..806a2f0 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -298,7 +298,7 @@ static void davinci_init_wdt(void)
/*-------------------------------------------------------------------------*/
-struct platform_device davinci_pcm_device = {
+static struct platform_device davinci_pcm_device = {
.name = "davinci-pcm-audio",
.id = -1,
};
diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c
index a0b8388..e722139 100644
--- a/arch/arm/mach-davinci/gpio.c
+++ b/arch/arm/mach-davinci/gpio.c
@@ -252,9 +252,11 @@ static struct irq_chip gpio_irqchip = {
static void
gpio_irq_handler(unsigned irq, struct irq_desc *desc)
{
- struct davinci_gpio_regs __iomem *g = irq2regs(irq);
+ struct davinci_gpio_regs __iomem *g;
u32 mask = 0xffff;
+ g = (__force struct davinci_gpio_regs __iomem *) irq_desc_get_handler_data(desc);
+
/* we only care about one bank */
if (irq & 1)
mask <<= 16;
@@ -422,8 +424,7 @@ static int __init davinci_gpio_irq_setup(void)
/* set up all irqs in this bank */
irq_set_chained_handler(bank_irq, gpio_irq_handler);
- irq_set_chip_data(bank_irq, (__force void *)g);
- irq_set_handler_data(bank_irq, (void *)irq);
+ irq_set_handler_data(bank_irq, (__force void *)g);
for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) {
irq_set_chip(irq, &gpio_irqchip);
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 8207954..1d4b65f 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -402,11 +402,15 @@ static struct resource ep93xx_eth_resource[] = {
}
};
+static u64 ep93xx_eth_dma_mask = DMA_BIT_MASK(32);
+
static struct platform_device ep93xx_eth_device = {
.name = "ep93xx-eth",
.id = -1,
.dev = {
- .platform_data = &ep93xx_eth_data,
+ .platform_data = &ep93xx_eth_data,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .dma_mask = &ep93xx_eth_dma_mask,
},
.num_resources = ARRAY_SIZE(ep93xx_eth_resource),
.resource = ep93xx_eth_resource,
diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index b92c1e5..1435fc3 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -91,6 +91,11 @@ config EXYNOS4_SETUP_FIMC
help
Common setup code for the camera interfaces.
+config EXYNOS4_SETUP_USB_PHY
+ bool
+ help
+ Common setup code for USB PHY controller
+
# machine support
menu "EXYNOS4 Machines"
@@ -176,6 +181,7 @@ config MACH_NURI
select EXYNOS4_SETUP_I2C3
select EXYNOS4_SETUP_I2C5
select EXYNOS4_SETUP_SDHCI
+ select EXYNOS4_SETUP_USB_PHY
select SAMSUNG_DEV_PWM
help
Machine support for Samsung Mobile NURI Board.
diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile
index a9bb94f..60fe5ec 100644
--- a/arch/arm/mach-exynos4/Makefile
+++ b/arch/arm/mach-exynos4/Makefile
@@ -56,4 +56,4 @@ obj-$(CONFIG_EXYNOS4_SETUP_KEYPAD) += setup-keypad.o
obj-$(CONFIG_EXYNOS4_SETUP_SDHCI) += setup-sdhci.o
obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
-obj-$(CONFIG_USB_SUPPORT) += usb-phy.o
+obj-$(CONFIG_EXYNOS4_SETUP_USB_PHY) += setup-usb-phy.o
diff --git a/arch/arm/mach-exynos4/cpu.c b/arch/arm/mach-exynos4/cpu.c
index 08813a6..9babe44 100644
--- a/arch/arm/mach-exynos4/cpu.c
+++ b/arch/arm/mach-exynos4/cpu.c
@@ -98,7 +98,7 @@ static struct map_desc exynos4_iodesc[] __initdata = {
.length = SZ_4K,
.type = MT_DEVICE,
}, {
- .virtual = (unsigned long)S5P_VA_USB_HSPHY,
+ .virtual = (unsigned long)S3C_VA_USB_HSPHY,
.pfn = __phys_to_pfn(EXYNOS4_PA_HSPHY),
.length = SZ_4K,
.type = MT_DEVICE,
diff --git a/arch/arm/mach-exynos4/include/mach/regs-usb-phy.h b/arch/arm/mach-exynos4/include/mach/regs-usb-phy.h
index 703118d..c337cf3 100644
--- a/arch/arm/mach-exynos4/include/mach/regs-usb-phy.h
+++ b/arch/arm/mach-exynos4/include/mach/regs-usb-phy.h
@@ -11,7 +11,7 @@
#ifndef __PLAT_S5P_REGS_USB_PHY_H
#define __PLAT_S5P_REGS_USB_PHY_H
-#define EXYNOS4_HSOTG_PHYREG(x) ((x) + S5P_VA_USB_HSPHY)
+#define EXYNOS4_HSOTG_PHYREG(x) ((x) + S3C_VA_USB_HSPHY)
#define EXYNOS4_PHYPWR EXYNOS4_HSOTG_PHYREG(0x00)
#define PHY1_HSIC_NORMAL_MASK (0xf << 9)
diff --git a/arch/arm/mach-exynos4/usb-phy.c b/arch/arm/mach-exynos4/setup-usb-phy.c
index 0883c1b..0883c1b 100644
--- a/arch/arm/mach-exynos4/usb-phy.c
+++ b/arch/arm/mach-exynos4/setup-usb-phy.c
diff --git a/arch/arm/mach-exynos4/time.c b/arch/arm/mach-exynos4/time.c
index 86b9fa0..ebb8f38 100644
--- a/arch/arm/mach-exynos4/time.c
+++ b/arch/arm/mach-exynos4/time.c
@@ -206,6 +206,7 @@ static cycle_t exynos4_pwm4_read(struct clocksource *cs)
return (cycle_t) ~__raw_readl(S3C_TIMERREG(0x40));
}
+#ifdef CONFIG_PM
static void exynos4_pwm4_resume(struct clocksource *cs)
{
unsigned long pclk;
@@ -218,6 +219,7 @@ static void exynos4_pwm4_resume(struct clocksource *cs)
exynos4_pwm_init(4, ~0);
exynos4_pwm_start(4, 1);
}
+#endif
struct clocksource pwm_clocksource = {
.name = "pwm_timer4",
diff --git a/arch/arm/mach-footbridge/dc21285-timer.c b/arch/arm/mach-footbridge/dc21285-timer.c
index 5f1f986..121ad1d 100644
--- a/arch/arm/mach-footbridge/dc21285-timer.c
+++ b/arch/arm/mach-footbridge/dc21285-timer.c
@@ -103,6 +103,7 @@ static void __init footbridge_timer_init(void)
clockevents_calc_mult_shift(ce, mem_fclk_21285, 5);
ce->max_delta_ns = clockevent_delta2ns(0xffffff, ce);
ce->min_delta_ns = clockevent_delta2ns(0x000004, ce);
+ ce->cpumask = cpumask_of(smp_processor_id());
clockevents_register_device(ce);
}
diff --git a/arch/arm/mach-footbridge/include/mach/debug-macro.S b/arch/arm/mach-footbridge/include/mach/debug-macro.S
index 30b971d..1be2eeb 100644
--- a/arch/arm/mach-footbridge/include/mach/debug-macro.S
+++ b/arch/arm/mach-footbridge/include/mach/debug-macro.S
@@ -26,6 +26,7 @@
#include <asm/hardware/debug-8250.S>
#else
+#include <mach/hardware.h>
/* For EBSA285 debugging */
.equ dc21285_high, ARMCSR_BASE & 0xff000000
.equ dc21285_low, ARMCSR_BASE & 0x00ffffff
@@ -36,8 +37,8 @@
.else
mov \rp, #0
.endif
- orr \rv, \rp, #0x42000000
- orr \rp, \rp, #dc21285_high
+ orr \rv, \rp, #dc21285_high
+ orr \rp, \rp, #0x42000000
.endm
.macro senduart,rd,rx
diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
index 38b95e9..63621f1 100644
--- a/arch/arm/mach-msm/timer.c
+++ b/arch/arm/mach-msm/timer.c
@@ -23,6 +23,8 @@
#include <linux/io.h>
#include <asm/mach/time.h>
+#include <asm/hardware/gic.h>
+
#include <mach/msm_iomap.h>
#include <mach/cpu.h>
@@ -55,10 +57,12 @@ enum timer_location {
#if defined(CONFIG_ARCH_QSD8X50)
#define DGT_HZ (19200000 / 4) /* 19.2 MHz / 4 by default */
#define MSM_DGT_SHIFT (0)
-#elif defined(CONFIG_ARCH_MSM7X30) || defined(CONFIG_ARCH_MSM8X60) || \
- defined(CONFIG_ARCH_MSM8960)
+#elif defined(CONFIG_ARCH_MSM7X30)
#define DGT_HZ (24576000 / 4) /* 24.576 MHz (LPXO) / 4 by default */
#define MSM_DGT_SHIFT (0)
+#elif defined(CONFIG_ARCH_MSM8X60) || defined(CONFIG_ARCH_MSM8960)
+#define DGT_HZ (27000000 / 4) /* 27 MHz (PXO) / 4 by default */
+#define MSM_DGT_SHIFT (0)
#else
#define DGT_HZ 19200000 /* 19.2 MHz or 600 KHz after shift */
#define MSM_DGT_SHIFT (5)
@@ -100,7 +104,11 @@ static cycle_t msm_read_timer_count(struct clocksource *cs)
{
struct msm_clock *clk = container_of(cs, struct msm_clock, clocksource);
- return readl(clk->global_counter);
+ /*
+ * Shift timer count down by a constant due to unreliable lower bits
+ * on some targets.
+ */
+ return readl(clk->global_counter) >> clk->shift;
}
static struct msm_clock *clockevent_to_clock(struct clock_event_device *evt)
diff --git a/arch/arm/mach-mxs/ocotp.c b/arch/arm/mach-mxs/ocotp.c
index 65157a3..54add60 100644
--- a/arch/arm/mach-mxs/ocotp.c
+++ b/arch/arm/mach-mxs/ocotp.c
@@ -16,6 +16,8 @@
#include <linux/err.h>
#include <linux/mutex.h>
+#include <asm/processor.h> /* for cpu_relax() */
+
#include <mach/mxs.h>
#define OCOTP_WORD_OFFSET 0x20
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index af98117..5b114d1 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -4,14 +4,14 @@
# Common support
obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o
-obj-y += clock.o clock_data.o opp_data.o reset.o
+obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o
obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
obj-$(CONFIG_OMAP_32K_TIMER) += timer32k.o
# Power Management
-obj-$(CONFIG_PM) += pm.o sleep.o pm_bus.o
+obj-$(CONFIG_PM) += pm.o sleep.o
# DSP
obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o
diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c
index d855934..f5a5220 100644
--- a/arch/arm/mach-omap1/dma.c
+++ b/arch/arm/mach-omap1/dma.c
@@ -284,14 +284,15 @@ static int __init omap1_system_dma_init(void)
dma_base = ioremap(res[0].start, resource_size(&res[0]));
if (!dma_base) {
pr_err("%s: Unable to ioremap\n", __func__);
- return -ENODEV;
+ ret = -ENODEV;
+ goto exit_device_put;
}
ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
if (ret) {
dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n",
__func__, pdev->name, pdev->id);
- goto exit_device_del;
+ goto exit_device_put;
}
p = kzalloc(sizeof(struct omap_system_dma_plat_info), GFP_KERNEL);
@@ -299,7 +300,7 @@ static int __init omap1_system_dma_init(void)
dev_err(&pdev->dev, "%s: Unable to allocate 'p' for %s\n",
__func__, pdev->name);
ret = -ENOMEM;
- goto exit_device_put;
+ goto exit_device_del;
}
d = kzalloc(sizeof(struct omap_dma_dev_attr), GFP_KERNEL);
@@ -380,10 +381,10 @@ exit_release_d:
kfree(d);
exit_release_p:
kfree(p);
-exit_device_put:
- platform_device_put(pdev);
exit_device_del:
platform_device_del(pdev);
+exit_device_put:
+ platform_device_put(pdev);
return ret;
}
diff --git a/arch/arm/mach-omap1/pm_bus.c b/arch/arm/mach-omap1/pm_bus.c
index fe31d93..334fb88 100644
--- a/arch/arm/mach-omap1/pm_bus.c
+++ b/arch/arm/mach-omap1/pm_bus.c
@@ -56,9 +56,13 @@ static struct dev_power_domain default_power_domain = {
USE_PLATFORM_PM_SLEEP_OPS
},
};
+#define OMAP1_PWR_DOMAIN (&default_power_domain)
+#else
+#define OMAP1_PWR_DOMAIN NULL
+#endif /* CONFIG_PM_RUNTIME */
static struct pm_clk_notifier_block platform_bus_notifier = {
- .pwr_domain = &default_power_domain,
+ .pwr_domain = OMAP1_PWR_DOMAIN,
.con_ids = { "ick", "fck", NULL, },
};
@@ -72,4 +76,4 @@ static int __init omap1_pm_runtime_init(void)
return 0;
}
core_initcall(omap1_pm_runtime_init);
-#endif /* CONFIG_PM_RUNTIME */
+
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index d54969b..5de6eac 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -26,13 +26,13 @@
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/gpio.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/gpio.h>
#include <plat/board.h>
#include <plat/common.h>
#include <plat/gpmc.h>
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index ae2963a..5dac974 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -622,19 +622,19 @@ static struct omap_device_pad serial3_pads[] __initdata = {
OMAP_MUX_MODE0),
};
-static struct omap_board_data serial1_data = {
+static struct omap_board_data serial1_data __initdata = {
.id = 0,
.pads = serial1_pads,
.pads_cnt = ARRAY_SIZE(serial1_pads),
};
-static struct omap_board_data serial2_data = {
+static struct omap_board_data serial2_data __initdata = {
.id = 1,
.pads = serial2_pads,
.pads_cnt = ARRAY_SIZE(serial2_pads),
};
-static struct omap_board_data serial3_data = {
+static struct omap_board_data serial3_data __initdata = {
.id = 2,
.pads = serial3_pads,
.pads_cnt = ARRAY_SIZE(serial3_pads),
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 73fa90b..63de2d3 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -258,7 +258,7 @@ static struct gpio sdp4430_eth_gpios[] __initdata = {
{ ETH_KS8851_IRQ, GPIOF_IN, "eth_irq" },
};
-static int omap_ethernet_init(void)
+static int __init omap_ethernet_init(void)
{
int status;
@@ -322,6 +322,7 @@ static struct omap2_hsmmc_info mmc[] = {
.gpio_wp = -EINVAL,
.nonremovable = true,
.ocr_mask = MMC_VDD_29_30,
+ .no_off_init = true,
},
{
.mmc = 1,
@@ -681,19 +682,19 @@ static struct omap_device_pad serial4_pads[] __initdata = {
OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
};
-static struct omap_board_data serial2_data = {
+static struct omap_board_data serial2_data __initdata = {
.id = 1,
.pads = serial2_pads,
.pads_cnt = ARRAY_SIZE(serial2_pads),
};
-static struct omap_board_data serial3_data = {
+static struct omap_board_data serial3_data __initdata = {
.id = 2,
.pads = serial3_pads,
.pads_cnt = ARRAY_SIZE(serial3_pads),
};
-static struct omap_board_data serial4_data = {
+static struct omap_board_data serial4_data __initdata = {
.id = 3,
.pads = serial4_pads,
.pads_cnt = ARRAY_SIZE(serial4_pads),
@@ -729,7 +730,7 @@ static void __init omap_4430sdp_init(void)
if (omap_rev() == OMAP4430_REV_ES1_0)
package = OMAP_PACKAGE_CBL;
- omap4_mux_init(board_mux, package);
+ omap4_mux_init(board_mux, NULL, package);
omap_board_config = sdp4430_config;
omap_board_config_size = ARRAY_SIZE(sdp4430_config);
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index f3beb8e..b124bdf 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -27,13 +27,13 @@
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/smc91x.h>
+#include <linux/gpio.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
-#include <mach/gpio.h>
#include <plat/led.h>
#include <plat/usb.h>
#include <plat/board.h>
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index c63115b..77456de 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -63,8 +63,6 @@
#define SB_T35_SMSC911X_CS 4
#define SB_T35_SMSC911X_GPIO 65
-#define NAND_BLOCK_SIZE SZ_128K
-
#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
#include <linux/smsc911x.h>
#include <plat/gpmc-smsc911x.h>
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index 08f08e8..c3a9fd3 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -48,6 +48,7 @@
#include "mux.h"
#include "control.h"
+#include "common-board-devices.h"
#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
static struct gpio_led cm_t3517_leds[] = {
@@ -177,7 +178,7 @@ static struct usbhs_omap_board_data cm_t3517_ehci_pdata __initdata = {
.reset_gpio_port[2] = -EINVAL,
};
-static int cm_t3517_init_usbh(void)
+static int __init cm_t3517_init_usbh(void)
{
int err;
@@ -203,8 +204,6 @@ static inline int cm_t3517_init_usbh(void)
#endif
#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-#define NAND_BLOCK_SIZE SZ_128K
-
static struct mtd_partition cm_t3517_nand_partitions[] = {
{
.name = "xloader",
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index cf520d7..34956ec 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -61,8 +61,6 @@
#include "timer-gp.h"
#include "common-board-devices.h"
-#define NAND_BLOCK_SIZE SZ_128K
-
#define OMAP_DM9000_GPIO_IRQ 25
#define OMAP3_DEVKIT_TS_GPIO 27
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index be71426..7f21d24 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -54,8 +54,6 @@
#include "pm.h"
#include "common-board-devices.h"
-#define NAND_BLOCK_SIZE SZ_128K
-
/*
* OMAP3 Beagle revision
* Run time detection of Beagle revision is done by reading GPIO.
@@ -106,6 +104,9 @@ static void __init omap3_beagle_init_rev(void)
beagle_rev = gpio_get_value(171) | (gpio_get_value(172) << 1)
| (gpio_get_value(173) << 2);
+ gpio_free_array(omap3_beagle_rev_gpios,
+ ARRAY_SIZE(omap3_beagle_rev_gpios));
+
switch (beagle_rev) {
case 7:
printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n");
@@ -579,6 +580,9 @@ static void __init omap3_beagle_init(void)
omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions,
ARRAY_SIZE(omap3beagle_nand_partitions));
+ /* Ensure msecure is mux'd to be able to set the RTC. */
+ omap_mux_init_signal("sys_drm_msecure", OMAP_PIN_OFF_OUTPUT_HIGH);
+
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 1d10736..23f71d4 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -30,6 +30,7 @@
#include <linux/leds.h>
#include <linux/input.h>
#include <linux/input/matrix_keypad.h>
+#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
@@ -41,7 +42,6 @@
#include <plat/board.h>
#include <plat/common.h>
-#include <mach/gpio.h>
#include <mach/hardware.h>
#include <plat/mcspi.h>
#include <plat/usb.h>
@@ -57,8 +57,6 @@
#define PANDORA_WIFI_NRESET_GPIO 23
#define OMAP3_PANDORA_TS_GPIO 94
-#define NAND_BLOCK_SIZE SZ_128K
-
static struct mtd_partition omap3pandora_nand_partitions[] = {
{
.name = "xloader",
@@ -86,7 +84,8 @@ static struct mtd_partition omap3pandora_nand_partitions[] = {
static struct omap_nand_platform_data pandora_nand_data = {
.cs = 0,
- .devsize = 1, /* '0' for 8-bit, '1' for 16-bit device */
+ .devsize = NAND_BUSWIDTH_16,
+ .xfer_type = NAND_OMAP_PREFETCH_DMA,
.parts = omap3pandora_nand_partitions,
.nr_parts = ARRAY_SIZE(omap3pandora_nand_partitions),
};
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 82872d7..5f649fa 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -56,8 +56,6 @@
#include <asm/setup.h>
-#define NAND_BLOCK_SIZE SZ_128K
-
#define OMAP3_AC_GPIO 136
#define OMAP3_TS_GPIO 162
#define TB_BL_PWM_TIMER 9
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 90485fc..0cfe200 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -526,19 +526,19 @@ static struct omap_device_pad serial4_pads[] __initdata = {
OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
};
-static struct omap_board_data serial2_data = {
+static struct omap_board_data serial2_data __initdata = {
.id = 1,
.pads = serial2_pads,
.pads_cnt = ARRAY_SIZE(serial2_pads),
};
-static struct omap_board_data serial3_data = {
+static struct omap_board_data serial3_data __initdata = {
.id = 2,
.pads = serial3_pads,
.pads_cnt = ARRAY_SIZE(serial3_pads),
};
-static struct omap_board_data serial4_data = {
+static struct omap_board_data serial4_data __initdata = {
.id = 3,
.pads = serial4_pads,
.pads_cnt = ARRAY_SIZE(serial4_pads),
@@ -687,7 +687,7 @@ static void __init omap4_panda_init(void)
if (omap_rev() == OMAP4430_REV_ES1_0)
package = OMAP_PACKAGE_CBL;
- omap4_mux_init(board_mux, package);
+ omap4_mux_init(board_mux, NULL, package);
if (wl12xx_set_platform_data(&omap_panda_wlan_data))
pr_err("error setting wl12xx data\n");
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 1555918..175e1ab 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -24,6 +24,7 @@
#include <linux/err.h>
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/i2c/twl.h>
@@ -45,7 +46,6 @@
#include <plat/common.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
-#include <mach/gpio.h>
#include <plat/gpmc.h>
#include <mach/hardware.h>
#include <plat/nand.h>
@@ -65,8 +65,6 @@
#define OVERO_GPIO_USBH_CPEN 168
#define OVERO_GPIO_USBH_NRESET 183
-#define NAND_BLOCK_SIZE SZ_128K
-
#define OVERO_SMSC911X_CS 5
#define OVERO_SMSC911X_GPIO 176
#define OVERO_SMSC911X2_CS 4
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index f6247e7..9903667 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -488,6 +488,7 @@ static struct regulator_init_data rx51_vmmc2 = {
.name = "V28_A",
.min_uV = 2800000,
.max_uV = 3000000,
+ .always_on = true, /* due VIO leak to AIC34 VDDs */
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
@@ -582,7 +583,7 @@ static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n)
{
/* FIXME this gpio setup is just a placeholder for now */
gpio_request_one(gpio + 6, GPIOF_OUT_INIT_LOW, "backlight_pwm");
- gpio_request_one(gpio + 7, GPIOF_OUT_INIT_HIGH, "speaker_en");
+ gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "speaker_en");
return 0;
}
diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c
index c7c6beb..d4683ba 100644
--- a/arch/arm/mach-omap2/board-zoom-display.c
+++ b/arch/arm/mach-omap2/board-zoom-display.c
@@ -26,7 +26,7 @@ static struct gpio zoom_lcd_gpios[] __initdata = {
{ LCD_PANEL_QVGA_GPIO, GPIOF_OUT_INIT_HIGH, "lcd qvga" },
};
-static void zoom_lcd_panel_init(void)
+static void __init zoom_lcd_panel_init(void)
{
zoom_lcd_gpios[0].gpio = (omap_rev() > OMAP3430_REV_ES3_0) ?
LCD_PANEL_RESET_GPIO_PROD :
diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c
index e94903b..94ccf46 100644
--- a/arch/arm/mach-omap2/common-board-devices.c
+++ b/arch/arm/mach-omap2/common-board-devices.c
@@ -85,17 +85,17 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
struct spi_board_info *spi_bi = &ads7846_spi_board_info;
int err;
- err = gpio_request(gpio_pendown, "TS PenDown");
- if (err) {
- pr_err("Could not obtain gpio for TS PenDown: %d\n", err);
- return;
- }
-
- gpio_direction_input(gpio_pendown);
- gpio_export(gpio_pendown, 0);
+ if (board_pdata && board_pdata->get_pendown_state) {
+ err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown");
+ if (err) {
+ pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err);
+ return;
+ }
+ gpio_export(gpio_pendown, 0);
- if (gpio_debounce)
- gpio_set_debounce(gpio_pendown, gpio_debounce);
+ if (gpio_debounce)
+ gpio_set_debounce(gpio_pendown, gpio_debounce);
+ }
ads7846_config.gpio_pendown = gpio_pendown;
diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h
index eb80b3b..6797190 100644
--- a/arch/arm/mach-omap2/common-board-devices.h
+++ b/arch/arm/mach-omap2/common-board-devices.h
@@ -1,6 +1,8 @@
#ifndef __OMAP_COMMON_BOARD_DEVICES__
#define __OMAP_COMMON_BOARD_DEVICES__
+#define NAND_BLOCK_SIZE SZ_128K
+
struct twl4030_platform_data;
struct mtd_partition;
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 7b85585..5b8ca68 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -97,7 +97,7 @@ static int __init omap4_l3_init(void)
WARN(IS_ERR(od), "could not build omap_device for %s\n", oh_name);
- return PTR_ERR(od);
+ return IS_ERR(od) ? PTR_ERR(od) : 0;
}
postcore_initcall(omap4_l3_init);
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index b2f30be..66868c5 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -145,6 +145,7 @@ static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot,
int power_on, int vdd)
{
u32 reg;
+ unsigned long timeout;
if (power_on) {
reg = omap4_ctrl_pad_readl(control_pbias_offset);
@@ -157,9 +158,15 @@ static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot,
OMAP4_MMC1_PWRDNZ_MASK |
OMAP4_USBC1_ICUSB_PWRDNZ_MASK);
omap4_ctrl_pad_writel(reg, control_pbias_offset);
- /* 4 microsec delay for comparator to generate an error*/
- udelay(4);
- reg = omap4_ctrl_pad_readl(control_pbias_offset);
+
+ timeout = jiffies + msecs_to_jiffies(5);
+ do {
+ reg = omap4_ctrl_pad_readl(control_pbias_offset);
+ if (!(reg & OMAP4_MMC1_PBIASLITE_VMODE_ERROR_MASK))
+ break;
+ usleep_range(100, 200);
+ } while (!time_after(jiffies, timeout));
+
if (reg & OMAP4_MMC1_PBIASLITE_VMODE_ERROR_MASK) {
pr_err("Pbias Voltage is not same as LDO\n");
/* Caution : On VMODE_ERROR Power Down MMC IO */
@@ -331,6 +338,9 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
if (c->no_off)
mmc->slots[0].no_off = 1;
+ if (c->no_off_init)
+ mmc->slots[0].no_regulator_off_init = c->no_off_init;
+
if (c->vcc_aux_disable_is_sleep)
mmc->slots[0].vcc_aux_disable_is_sleep = 1;
diff --git a/arch/arm/mach-omap2/hsmmc.h b/arch/arm/mach-omap2/hsmmc.h
index f119348..f757e78 100644
--- a/arch/arm/mach-omap2/hsmmc.h
+++ b/arch/arm/mach-omap2/hsmmc.h
@@ -18,6 +18,7 @@ struct omap2_hsmmc_info {
bool nonremovable; /* Nonremovable e.g. eMMC */
bool power_saving; /* Try to sleep or power off when possible */
bool no_off; /* power_saving and power is not to go off */
+ bool no_off_init; /* no power off when not in MMC sleep state */
bool vcc_aux_disable_is_sleep; /* Regulator off remapped to sleep */
int gpio_cd; /* or -EINVAL */
int gpio_wp; /* or -EINVAL */
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index a4ab1e3..c7fb22a 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -83,6 +83,9 @@ void omap_mux_write(struct omap_mux_partition *partition, u16 val,
void omap_mux_write_array(struct omap_mux_partition *partition,
struct omap_board_mux *board_mux)
{
+ if (!board_mux)
+ return;
+
while (board_mux->reg_offset != OMAP_MUX_TERMINATOR) {
omap_mux_write(partition, board_mux->value,
board_mux->reg_offset);
@@ -906,7 +909,7 @@ static struct omap_mux *omap_mux_get_by_gpio(
u16 omap_mux_get_gpio(int gpio)
{
struct omap_mux_partition *partition;
- struct omap_mux *m;
+ struct omap_mux *m = NULL;
list_for_each_entry(partition, &mux_partitions, node) {
m = omap_mux_get_by_gpio(partition, gpio);
diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h
index 137f321..2132308 100644
--- a/arch/arm/mach-omap2/mux.h
+++ b/arch/arm/mach-omap2/mux.h
@@ -323,10 +323,12 @@ int omap3_mux_init(struct omap_board_mux *board_mux, int flags);
/**
* omap4_mux_init() - initialize mux system with board specific set
- * @board_mux: Board specific mux table
+ * @board_subset: Board specific mux table
+ * @board_wkup_subset: Board specific mux table for wakeup instance
* @flags: OMAP package type used for the board
*/
-int omap4_mux_init(struct omap_board_mux *board_mux, int flags);
+int omap4_mux_init(struct omap_board_mux *board_subset,
+ struct omap_board_mux *board_wkup_subset, int flags);
/**
* omap_mux_init - private mux init function, do not call
diff --git a/arch/arm/mach-omap2/mux44xx.c b/arch/arm/mach-omap2/mux44xx.c
index 9a66445..f5a74da 100644
--- a/arch/arm/mach-omap2/mux44xx.c
+++ b/arch/arm/mach-omap2/mux44xx.c
@@ -1309,7 +1309,8 @@ static struct omap_ball __initdata omap4_wkup_cbl_cbs_ball[] = {
#define omap4_wkup_cbl_cbs_ball NULL
#endif
-int __init omap4_mux_init(struct omap_board_mux *board_subset, int flags)
+int __init omap4_mux_init(struct omap_board_mux *board_subset,
+ struct omap_board_mux *board_wkup_subset, int flags)
{
struct omap_ball *package_balls_core;
struct omap_ball *package_balls_wkup = omap4_wkup_cbl_cbs_ball;
@@ -1347,7 +1348,7 @@ int __init omap4_mux_init(struct omap_board_mux *board_subset, int flags)
OMAP_MUX_GPIO_IN_MODE3,
OMAP4_CTRL_MODULE_PAD_WKUP_MUX_PBASE,
OMAP4_CTRL_MODULE_PAD_WKUP_MUX_SIZE,
- omap4_wkup_muxmodes, NULL, board_subset,
+ omap4_wkup_muxmodes, NULL, board_wkup_subset,
package_balls_wkup);
return ret;
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index e034294..293fa6c 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1628,7 +1628,7 @@ int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data),
void *data)
{
struct omap_hwmod *temp_oh;
- int ret;
+ int ret = 0;
if (!fn)
return -EINVAL;
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index abc548a..e1c69ff 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -5109,7 +5109,7 @@ static __initdata struct omap_hwmod *omap44xx_hwmods[] = {
&omap44xx_iva_seq1_hwmod,
/* kbd class */
-/* &omap44xx_kbd_hwmod, */
+ &omap44xx_kbd_hwmod,
/* mailbox class */
&omap44xx_mailbox_hwmod,
diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c
index f47813e..58775e3 100644
--- a/arch/arm/mach-omap2/omap_phy_internal.c
+++ b/arch/arm/mach-omap2/omap_phy_internal.c
@@ -56,8 +56,10 @@ int omap4430_phy_init(struct device *dev)
/* Power down the phy */
__raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF);
- if (!dev)
+ if (!dev) {
+ iounmap(ctrl_base);
return 0;
+ }
phyclk = clk_get(dev, "ocp2scp_usb_phy_ick");
if (IS_ERR(phyclk)) {
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index a5a83b3..e01da45 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -189,7 +189,7 @@ static struct dentry *pm_dbg_dir;
static int pm_dbg_init_done;
-static int __init pm_dbg_init(void);
+static int pm_dbg_init(void);
enum {
DEBUG_FILE_COUNTERS = 0,
@@ -595,7 +595,7 @@ static int option_set(void *data, u64 val)
DEFINE_SIMPLE_ATTRIBUTE(pm_dbg_option_fops, option_get, option_set, "%llu\n");
-static int __init pm_dbg_init(void)
+static int pm_dbg_init(void)
{
int i;
struct dentry *d;
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 7fe7406..094279a 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -14,6 +14,7 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/delay.h>
+#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/apm-emulation.h>
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index 0d468e9..8169535 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -10,7 +10,6 @@ obj-n :=
obj- :=
obj-$(CONFIG_CPU_S3C2410) += s3c2410.o
-obj-$(CONFIG_CPU_S3C2410) += irq.o
obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o
obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o
obj-$(CONFIG_S3C2410_PM) += pm.o sleep.o
diff --git a/arch/arm/mach-s3c2410/irq.c b/arch/arm/mach-s3c2410/irq.c
deleted file mode 100644
index 2854129..0000000
--- a/arch/arm/mach-s3c2410/irq.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/irq.c
- *
- * Copyright (c) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/syscore_ops.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-
-struct syscore_ops s3c24xx_irq_syscore_ops = {
- .suspend = s3c24xx_irq_suspend,
- .resume = s3c24xx_irq_resume,
-};
diff --git a/arch/arm/mach-s5pv210/cpufreq.c b/arch/arm/mach-s5pv210/cpufreq.c
index 22046e2..153af8b 100644
--- a/arch/arm/mach-s5pv210/cpufreq.c
+++ b/arch/arm/mach-s5pv210/cpufreq.c
@@ -101,12 +101,14 @@ static void s5pv210_set_refresh(enum s5pv210_dmc_port ch, unsigned long freq)
unsigned long tmp, tmp1;
void __iomem *reg = NULL;
- if (ch == DMC0)
+ if (ch == DMC0) {
reg = (S5P_VA_DMC0 + 0x30);
- else if (ch == DMC1)
+ } else if (ch == DMC1) {
reg = (S5P_VA_DMC1 + 0x30);
- else
+ } else {
printk(KERN_ERR "Cannot find DMC port\n");
+ return;
+ }
/* Find current DRAM frequency */
tmp = s5pv210_dram_conf[ch].freq;
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index c95258c..1e2aba2 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -382,10 +382,8 @@ void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state)
}
static struct sh_mobile_sdhi_info sh_sdhi1_platdata = {
- .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX,
- .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX,
.tmio_flags = TMIO_MMC_WRPROTECT_DISABLE,
- .tmio_caps = MMC_CAP_NONREMOVABLE,
+ .tmio_caps = MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ,
.tmio_ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.set_pwr = ag5evm_sdhi1_set_pwr,
};
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 776f205..7e1d375 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -126,7 +126,7 @@
* ------+--------------------+--------------------+-------
* IRQ0 | ICR1A.IRQ0SA=0010 | SDHI2 card detect | Low
* IRQ6 | ICR1A.IRQ6SA=0011 | Ether(LAN9220) | High
- * IRQ7 | ICR1A.IRQ7SA=0010 | LCD Tuch Panel | Low
+ * IRQ7 | ICR1A.IRQ7SA=0010 | LCD Touch Panel | Low
* IRQ8 | ICR2A.IRQ8SA=0010 | MMC/SD card detect | Low
* IRQ9 | ICR2A.IRQ9SA=0010 | KEY(TCA6408) | Low
* IRQ21 | ICR4A.IRQ21SA=0011 | Sensor(ADXL345) | High
@@ -165,10 +165,10 @@
* USB1 can become Host by r8a66597, and become Function by renesas_usbhs.
* But don't select both drivers in same time.
* These uses same IRQ number for request_irq(), and aren't supporting
- * IRQF_SHARD / IORESOURCE_IRQ_SHAREABLE.
+ * IRQF_SHARED / IORESOURCE_IRQ_SHAREABLE.
*
* Actually these are old/new version of USB driver.
- * This mean its register will be broken if it supports SHARD IRQ,
+ * This mean its register will be broken if it supports shared IRQ,
*/
/*
@@ -562,7 +562,121 @@ out:
clk_put(hdmi_ick);
}
-/* USB1 (Host) */
+/* USBHS0 is connected to CN22 which takes a USB Mini-B plug
+ *
+ * The sh7372 SoC has IRQ7 set aside for USBHS0 hotplug,
+ * but on this particular board IRQ7 is already used by
+ * the touch screen. This leaves us with software polling.
+ */
+#define USBHS0_POLL_INTERVAL (HZ * 5)
+
+struct usbhs_private {
+ unsigned int usbphyaddr;
+ unsigned int usbcrcaddr;
+ struct renesas_usbhs_platform_info info;
+ struct delayed_work work;
+ struct platform_device *pdev;
+};
+
+#define usbhs_get_priv(pdev) \
+ container_of(renesas_usbhs_get_info(pdev), \
+ struct usbhs_private, info)
+
+#define usbhs_is_connected(priv) \
+ (!((1 << 7) & __raw_readw(priv->usbcrcaddr)))
+
+static int usbhs_get_vbus(struct platform_device *pdev)
+{
+ return usbhs_is_connected(usbhs_get_priv(pdev));
+}
+
+static void usbhs_phy_reset(struct platform_device *pdev)
+{
+ struct usbhs_private *priv = usbhs_get_priv(pdev);
+
+ /* init phy */
+ __raw_writew(0x8a0a, priv->usbcrcaddr);
+}
+
+static int usbhs0_get_id(struct platform_device *pdev)
+{
+ return USBHS_GADGET;
+}
+
+static void usbhs0_work_function(struct work_struct *work)
+{
+ struct usbhs_private *priv = container_of(work, struct usbhs_private,
+ work.work);
+
+ renesas_usbhs_call_notify_hotplug(priv->pdev);
+ schedule_delayed_work(&priv->work, USBHS0_POLL_INTERVAL);
+}
+
+static int usbhs0_hardware_init(struct platform_device *pdev)
+{
+ struct usbhs_private *priv = usbhs_get_priv(pdev);
+
+ priv->pdev = pdev;
+ INIT_DELAYED_WORK(&priv->work, usbhs0_work_function);
+ schedule_delayed_work(&priv->work, USBHS0_POLL_INTERVAL);
+ return 0;
+}
+
+static void usbhs0_hardware_exit(struct platform_device *pdev)
+{
+ struct usbhs_private *priv = usbhs_get_priv(pdev);
+
+ cancel_delayed_work_sync(&priv->work);
+}
+
+static struct usbhs_private usbhs0_private = {
+ .usbcrcaddr = 0xe605810c, /* USBCR2 */
+ .info = {
+ .platform_callback = {
+ .hardware_init = usbhs0_hardware_init,
+ .hardware_exit = usbhs0_hardware_exit,
+ .phy_reset = usbhs_phy_reset,
+ .get_id = usbhs0_get_id,
+ .get_vbus = usbhs_get_vbus,
+ },
+ .driver_param = {
+ .buswait_bwait = 4,
+ },
+ },
+};
+
+static struct resource usbhs0_resources[] = {
+ [0] = {
+ .name = "USBHS0",
+ .start = 0xe6890000,
+ .end = 0xe68900e6 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = evt2irq(0x1ca0) /* USB0_USB0I0 */,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device usbhs0_device = {
+ .name = "renesas_usbhs",
+ .id = 0,
+ .dev = {
+ .platform_data = &usbhs0_private.info,
+ },
+ .num_resources = ARRAY_SIZE(usbhs0_resources),
+ .resource = usbhs0_resources,
+};
+
+/* USBHS1 is connected to CN31 which takes a USB Mini-AB plug
+ *
+ * Use J30 to select between Host and Function. This setting
+ * can however not be detected by software. Hotplug of USBHS1
+ * is provided via IRQ8.
+ */
+#define IRQ8 evt2irq(0x0300)
+
+/* USBHS1 USB Host support via r8a66597_hcd */
static void usb1_host_port_power(int port, int power)
{
if (!power) /* only power-on is supported for now */
@@ -579,9 +693,9 @@ static struct r8a66597_platdata usb1_host_data = {
static struct resource usb1_host_resources[] = {
[0] = {
- .name = "USBHS",
- .start = 0xE68B0000,
- .end = 0xE68B00E6 - 1,
+ .name = "USBHS1",
+ .start = 0xe68b0000,
+ .end = 0xe68b00e6 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -602,37 +716,14 @@ static struct platform_device usb1_host_device = {
.resource = usb1_host_resources,
};
-/* USB1 (Function) */
+/* USBHS1 USB Function support via renesas_usbhs */
+
#define USB_PHY_MODE (1 << 4)
#define USB_PHY_INT_EN ((1 << 3) | (1 << 2))
#define USB_PHY_ON (1 << 1)
#define USB_PHY_OFF (1 << 0)
#define USB_PHY_INT_CLR (USB_PHY_ON | USB_PHY_OFF)
-struct usbhs_private {
- unsigned int irq;
- unsigned int usbphyaddr;
- unsigned int usbcrcaddr;
- struct renesas_usbhs_platform_info info;
-};
-
-#define usbhs_get_priv(pdev) \
- container_of(renesas_usbhs_get_info(pdev), \
- struct usbhs_private, info)
-
-#define usbhs_is_connected(priv) \
- (!((1 << 7) & __raw_readw(priv->usbcrcaddr)))
-
-static int usbhs1_get_id(struct platform_device *pdev)
-{
- return USBHS_GADGET;
-}
-
-static int usbhs1_get_vbus(struct platform_device *pdev)
-{
- return usbhs_is_connected(usbhs_get_priv(pdev));
-}
-
static irqreturn_t usbhs1_interrupt(int irq, void *data)
{
struct platform_device *pdev = data;
@@ -654,12 +745,10 @@ static int usbhs1_hardware_init(struct platform_device *pdev)
struct usbhs_private *priv = usbhs_get_priv(pdev);
int ret;
- irq_set_irq_type(priv->irq, IRQ_TYPE_LEVEL_HIGH);
-
/* clear interrupt status */
__raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr);
- ret = request_irq(priv->irq, usbhs1_interrupt, 0,
+ ret = request_irq(IRQ8, usbhs1_interrupt, IRQF_TRIGGER_HIGH,
dev_name(&pdev->dev), pdev);
if (ret) {
dev_err(&pdev->dev, "request_irq err\n");
@@ -679,15 +768,12 @@ static void usbhs1_hardware_exit(struct platform_device *pdev)
/* clear interrupt status */
__raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr);
- free_irq(priv->irq, pdev);
+ free_irq(IRQ8, pdev);
}
-static void usbhs1_phy_reset(struct platform_device *pdev)
+static int usbhs1_get_id(struct platform_device *pdev)
{
- struct usbhs_private *priv = usbhs_get_priv(pdev);
-
- /* init phy */
- __raw_writew(0x8a0a, priv->usbcrcaddr);
+ return USBHS_GADGET;
}
static u32 usbhs1_pipe_cfg[] = {
@@ -710,16 +796,15 @@ static u32 usbhs1_pipe_cfg[] = {
};
static struct usbhs_private usbhs1_private = {
- .irq = evt2irq(0x0300), /* IRQ8 */
- .usbphyaddr = 0xE60581E2, /* USBPHY1INTAP */
- .usbcrcaddr = 0xE6058130, /* USBCR4 */
+ .usbphyaddr = 0xe60581e2, /* USBPHY1INTAP */
+ .usbcrcaddr = 0xe6058130, /* USBCR4 */
.info = {
.platform_callback = {
.hardware_init = usbhs1_hardware_init,
.hardware_exit = usbhs1_hardware_exit,
- .phy_reset = usbhs1_phy_reset,
.get_id = usbhs1_get_id,
- .get_vbus = usbhs1_get_vbus,
+ .phy_reset = usbhs_phy_reset,
+ .get_vbus = usbhs_get_vbus,
},
.driver_param = {
.buswait_bwait = 4,
@@ -731,9 +816,9 @@ static struct usbhs_private usbhs1_private = {
static struct resource usbhs1_resources[] = {
[0] = {
- .name = "USBHS",
- .start = 0xE68B0000,
- .end = 0xE68B00E6 - 1,
+ .name = "USBHS1",
+ .start = 0xe68b0000,
+ .end = 0xe68b00e6 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -752,7 +837,6 @@ static struct platform_device usbhs1_device = {
.resource = usbhs1_resources,
};
-
/* LED */
static struct gpio_led mackerel_leds[] = {
{
@@ -1203,6 +1287,7 @@ static struct platform_device *mackerel_devices[] __initdata = {
&nor_flash_device,
&smc911x_device,
&lcdc_device,
+ &usbhs0_device,
&usb1_host_device,
&usbhs1_device,
&leds_device,
@@ -1301,6 +1386,7 @@ static void __init mackerel_map_io(void)
#define GPIO_PORT9CR 0xE6051009
#define GPIO_PORT10CR 0xE605100A
+#define GPIO_PORT167CR 0xE60520A7
#define GPIO_PORT168CR 0xE60520A8
#define SRCR4 0xe61580bc
#define USCCR1 0xE6058144
@@ -1354,17 +1440,17 @@ static void __init mackerel_init(void)
gpio_request(GPIO_PORT151, NULL); /* LCDDON */
gpio_direction_output(GPIO_PORT151, 1);
- /* USB enable */
- gpio_request(GPIO_FN_VBUS0_1, NULL);
- gpio_request(GPIO_FN_IDIN_1_18, NULL);
- gpio_request(GPIO_FN_PWEN_1_115, NULL);
- gpio_request(GPIO_FN_OVCN_1_114, NULL);
- gpio_request(GPIO_FN_EXTLP_1, NULL);
- gpio_request(GPIO_FN_OVCN2_1, NULL);
- gpio_pull_down(GPIO_PORT168CR);
-
- /* setup USB phy */
- __raw_writew(0x8a0a, 0xE6058130); /* USBCR4 */
+ /* USBHS0 */
+ gpio_request(GPIO_FN_VBUS0_0, NULL);
+ gpio_pull_down(GPIO_PORT168CR); /* VBUS0_0 pull down */
+
+ /* USBHS1 */
+ gpio_request(GPIO_FN_VBUS0_1, NULL);
+ gpio_pull_down(GPIO_PORT167CR); /* VBUS0_1 pull down */
+ gpio_request(GPIO_FN_IDIN_1_113, NULL);
+
+ /* USB phy tweak to make the r8a66597_hcd host driver work */
+ __raw_writew(0x8a0a, 0xe6058130); /* USBCR4 */
/* enable FSI2 port A (ak4643) */
gpio_request(GPIO_FN_FSIAIBT, NULL);
diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c
index 5d0e150..a911a60 100644
--- a/arch/arm/mach-shmobile/intc-sh73a0.c
+++ b/arch/arm/mach-shmobile/intc-sh73a0.c
@@ -250,6 +250,11 @@ static irqreturn_t sh73a0_intcs_demux(int irq, void *dev_id)
return IRQ_HANDLED;
}
+static int sh73a0_set_wake(struct irq_data *data, unsigned int on)
+{
+ return 0; /* always allow wakeup */
+}
+
void __init sh73a0_init_irq(void)
{
void __iomem *gic_dist_base = __io(0xf0001000);
@@ -257,6 +262,7 @@ void __init sh73a0_init_irq(void)
void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE);
gic_init(0, 29, gic_dist_base, gic_cpu_base);
+ gic_arch_extn.irq_set_wake = sh73a0_set_wake;
register_intc_controller(&intcs_desc);
diff --git a/arch/arm/mach-shmobile/setup-sh7367.c b/arch/arm/mach-shmobile/setup-sh7367.c
index 2c10190..e546017 100644
--- a/arch/arm/mach-shmobile/setup-sh7367.c
+++ b/arch/arm/mach-shmobile/setup-sh7367.c
@@ -38,7 +38,7 @@ static struct plat_sci_port scif0_platform_data = {
.flags = UPF_BOOT_AUTOCONF,
.scscr = SCSCR_RE | SCSCR_TE,
.scbrr_algo_id = SCBRR_ALGO_4,
- .type = PORT_SCIF,
+ .type = PORT_SCIFA,
.irqs = { evt2irq(0xc00), evt2irq(0xc00),
evt2irq(0xc00), evt2irq(0xc00) },
};
@@ -57,7 +57,7 @@ static struct plat_sci_port scif1_platform_data = {
.flags = UPF_BOOT_AUTOCONF,
.scscr = SCSCR_RE | SCSCR_TE,
.scbrr_algo_id = SCBRR_ALGO_4,
- .type = PORT_SCIF,
+ .type = PORT_SCIFA,
.irqs = { evt2irq(0xc20), evt2irq(0xc20),
evt2irq(0xc20), evt2irq(0xc20) },
};
@@ -76,7 +76,7 @@ static struct plat_sci_port scif2_platform_data = {
.flags = UPF_BOOT_AUTOCONF,
.scscr = SCSCR_RE | SCSCR_TE,
.scbrr_algo_id = SCBRR_ALGO_4,
- .type = PORT_SCIF,
+ .type = PORT_SCIFA,
.irqs = { evt2irq(0xc40), evt2irq(0xc40),
evt2irq(0xc40), evt2irq(0xc40) },
};
@@ -95,7 +95,7 @@ static struct plat_sci_port scif3_platform_data = {
.flags = UPF_BOOT_AUTOCONF,
.scscr = SCSCR_RE | SCSCR_TE,
.scbrr_algo_id = SCBRR_ALGO_4,
- .type = PORT_SCIF,
+ .type = PORT_SCIFA,
.irqs = { evt2irq(0xc60), evt2irq(0xc60),
evt2irq(0xc60), evt2irq(0xc60) },
};
@@ -114,7 +114,7 @@ static struct plat_sci_port scif4_platform_data = {
.flags = UPF_BOOT_AUTOCONF,
.scscr = SCSCR_RE | SCSCR_TE,
.scbrr_algo_id = SCBRR_ALGO_4,
- .type = PORT_SCIF,
+ .type = PORT_SCIFA,
.irqs = { evt2irq(0xd20), evt2irq(0xd20),
evt2irq(0xd20), evt2irq(0xd20) },
};
@@ -133,7 +133,7 @@ static struct plat_sci_port scif5_platform_data = {
.flags = UPF_BOOT_AUTOCONF,
.scscr = SCSCR_RE | SCSCR_TE,
.scbrr_algo_id = SCBRR_ALGO_4,
- .type = PORT_SCIF,
+ .type = PORT_SCIFA,
.irqs = { evt2irq(0xd40), evt2irq(0xd40),
evt2irq(0xd40), evt2irq(0xd40) },
};
@@ -152,7 +152,7 @@ static struct plat_sci_port scif6_platform_data = {
.flags = UPF_BOOT_AUTOCONF,
.scscr = SCSCR_RE | SCSCR_TE,
.scbrr_algo_id = SCBRR_ALGO_4,
- .type = PORT_SCIF,
+ .type = PORT_SCIFB,
.irqs = { evt2irq(0xd60), evt2irq(0xd60),
evt2irq(0xd60), evt2irq(0xd60) },
};
diff --git a/arch/arm/mach-tegra/board-harmony-power.c b/arch/arm/mach-tegra/board-harmony-power.c
index c84442c..5ad8b2f 100644
--- a/arch/arm/mach-tegra/board-harmony-power.c
+++ b/arch/arm/mach-tegra/board-harmony-power.c
@@ -24,6 +24,8 @@
#include <mach/irqs.h>
+#include "board-harmony.h"
+
#define PMC_CTRL 0x0
#define PMC_CTRL_INTR_LOW (1 << 17)
@@ -98,7 +100,7 @@ static struct tps6586x_platform_data tps_platform = {
.irq_base = TEGRA_NR_IRQS,
.num_subdevs = ARRAY_SIZE(tps_devs),
.subdevs = tps_devs,
- .gpio_base = TEGRA_NR_GPIOS,
+ .gpio_base = HARMONY_GPIO_TPS6586X(0),
};
static struct i2c_board_info __initdata harmony_regulators[] = {
diff --git a/arch/arm/mach-tegra/board-harmony.h b/arch/arm/mach-tegra/board-harmony.h
index 1e57b07..d85142e 100644
--- a/arch/arm/mach-tegra/board-harmony.h
+++ b/arch/arm/mach-tegra/board-harmony.h
@@ -17,7 +17,8 @@
#ifndef _MACH_TEGRA_BOARD_HARMONY_H
#define _MACH_TEGRA_BOARD_HARMONY_H
-#define HARMONY_GPIO_WM8903(_x_) (TEGRA_NR_GPIOS + (_x_))
+#define HARMONY_GPIO_TPS6586X(_x_) (TEGRA_NR_GPIOS + (_x_))
+#define HARMONY_GPIO_WM8903(_x_) (HARMONY_GPIO_TPS6586X(4) + (_x_))
#define TEGRA_GPIO_SD2_CD TEGRA_GPIO_PI5
#define TEGRA_GPIO_SD2_WP TEGRA_GPIO_PH1
diff --git a/arch/arm/mach-u300/clock.h b/arch/arm/mach-u300/clock.h
index c34f3ea..4f50ca8 100644
--- a/arch/arm/mach-u300/clock.h
+++ b/arch/arm/mach-u300/clock.h
@@ -31,7 +31,7 @@ struct clk {
bool reset;
__u16 clk_val;
__s8 usecount;
- __u32 res_reg;
+ void __iomem * res_reg;
__u16 res_mask;
bool hw_ctrld;
diff --git a/arch/arm/mach-u300/include/mach/u300-regs.h b/arch/arm/mach-u300/include/mach/u300-regs.h
index 8b85df4..035fdc9 100644
--- a/arch/arm/mach-u300/include/mach/u300-regs.h
+++ b/arch/arm/mach-u300/include/mach/u300-regs.h
@@ -18,6 +18,12 @@
* the defines are used for setting up the I/O memory mapping.
*/
+#ifdef __ASSEMBLER__
+#define IOMEM(a) (a)
+#else
+#define IOMEM(a) (void __iomem *) a
+#endif
+
/* NAND Flash CS0 */
#define U300_NAND_CS0_PHYS_BASE 0x80000000
@@ -48,13 +54,6 @@
#endif
/*
- * All the following peripherals are specified at their PHYSICAL address,
- * so if you need to access them (in the kernel), you MUST use the macros
- * defined in <asm/io.h> to map to the IO_ADDRESS_AHB() IO_ADDRESS_FAST()
- * etc.
- */
-
-/*
* AHB peripherals
*/
@@ -63,11 +62,11 @@
/* Vectored Interrupt Controller 0, servicing 32 interrupts */
#define U300_INTCON0_BASE (U300_AHB_PER_PHYS_BASE+0x1000)
-#define U300_INTCON0_VBASE (U300_AHB_PER_VIRT_BASE+0x1000)
+#define U300_INTCON0_VBASE IOMEM(U300_AHB_PER_VIRT_BASE+0x1000)
/* Vectored Interrupt Controller 1, servicing 32 interrupts */
#define U300_INTCON1_BASE (U300_AHB_PER_PHYS_BASE+0x2000)
-#define U300_INTCON1_VBASE (U300_AHB_PER_VIRT_BASE+0x2000)
+#define U300_INTCON1_VBASE IOMEM(U300_AHB_PER_VIRT_BASE+0x2000)
/* Memory Stick Pro (MSPRO) controller */
#define U300_MSPRO_BASE (U300_AHB_PER_PHYS_BASE+0x3000)
@@ -115,7 +114,7 @@
/* SYSCON */
#define U300_SYSCON_BASE (U300_SLOW_PER_PHYS_BASE+0x1000)
-#define U300_SYSCON_VBASE (U300_SLOW_PER_VIRT_BASE+0x1000)
+#define U300_SYSCON_VBASE IOMEM(U300_SLOW_PER_VIRT_BASE+0x1000)
/* Watchdog */
#define U300_WDOG_BASE (U300_SLOW_PER_PHYS_BASE+0x2000)
@@ -125,7 +124,7 @@
/* APP side special timer */
#define U300_TIMER_APP_BASE (U300_SLOW_PER_PHYS_BASE+0x4000)
-#define U300_TIMER_APP_VBASE (U300_SLOW_PER_VIRT_BASE+0x4000)
+#define U300_TIMER_APP_VBASE IOMEM(U300_SLOW_PER_VIRT_BASE+0x4000)
/* Keypad */
#define U300_KEYPAD_BASE (U300_SLOW_PER_PHYS_BASE+0x5000)
@@ -181,5 +180,4 @@
* Virtual accessor macros for static devices
*/
-
#endif
diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c
index 891cf44..18d7fa0 100644
--- a/arch/arm/mach-u300/timer.c
+++ b/arch/arm/mach-u300/timer.c
@@ -411,8 +411,7 @@ static void __init u300_timer_init(void)
/* Use general purpose timer 2 as clock source */
if (clocksource_mmio_init(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC,
"GPT2", rate, 300, 32, clocksource_mmio_readl_up))
- printk(KERN_ERR "timer: failed to initialize clock "
- "source %s\n", clocksource_u300_1mhz.name);
+ pr_err("timer: failed to initialize U300 clock source\n");
clockevents_calc_mult_shift(&clockevent_u300_1mhz,
rate, APPTIMER_MIN_RANGE);
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index c3c4176..4598b06 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -159,6 +159,9 @@ static void __init db8500_add_gpios(void)
/* No custom data yet */
};
+ if (cpu_is_u8500v2())
+ pdata.supports_sleepmode = true;
+
dbx500_add_gpios(ARRAY_AND_SIZE(db8500_gpio_base),
IRQ_DB8500_GPIO0, &pdata);
}
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index 285edcd..9e6b93b 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -46,12 +46,6 @@ static struct map_desc v2m_io_desc[] __initdata = {
},
};
-static void __init v2m_init_early(void)
-{
- ct_desc->init_early();
- versatile_sched_clock_init(MMIO_P2V(V2M_SYS_24MHZ), 24000000);
-}
-
static void __init v2m_timer_init(void)
{
u32 scctrl;
@@ -365,6 +359,13 @@ static struct clk_lookup v2m_lookups[] = {
},
};
+static void __init v2m_init_early(void)
+{
+ ct_desc->init_early();
+ clkdev_add_table(v2m_lookups, ARRAY_SIZE(v2m_lookups));
+ versatile_sched_clock_init(MMIO_P2V(V2M_SYS_24MHZ), 24000000);
+}
+
static void v2m_power_off(void)
{
if (v2m_cfg_write(SYS_CFG_SHUTDOWN | SYS_CFG_SITE_MB, 0))
@@ -418,8 +419,6 @@ static void __init v2m_init(void)
{
int i;
- clkdev_add_table(v2m_lookups, ARRAY_SIZE(v2m_lookups));
-
platform_device_register(&v2m_pcie_i2c_device);
platform_device_register(&v2m_ddc_i2c_device);
platform_device_register(&v2m_flash_device);
diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c
index 8bfae96..b0ee9ba 100644
--- a/arch/arm/mm/context.c
+++ b/arch/arm/mm/context.c
@@ -24,7 +24,9 @@ DEFINE_PER_CPU(struct mm_struct *, current_mm);
/*
* We fork()ed a process, and we need a new context for the child
- * to run in.
+ * to run in. We reserve version 0 for initial tasks so we will
+ * always allocate an ASID. The ASID 0 is reserved for the TTBR
+ * register changing sequence.
*/
void __init_new_context(struct task_struct *tsk, struct mm_struct *mm)
{
@@ -34,11 +36,8 @@ void __init_new_context(struct task_struct *tsk, struct mm_struct *mm)
static void flush_context(void)
{
- u32 ttb;
- /* Copy TTBR1 into TTBR0 */
- asm volatile("mrc p15, 0, %0, c2, c0, 1\n"
- "mcr p15, 0, %0, c2, c0, 0"
- : "=r" (ttb));
+ /* set the reserved ASID before flushing the TLB */
+ asm("mcr p15, 0, %0, c13, c0, 1\n" : : "r" (0));
isb();
local_flush_tlb_all();
if (icache_is_vivt_asid_tagged()) {
@@ -94,7 +93,7 @@ static void reset_context(void *info)
return;
smp_rmb();
- asid = cpu_last_asid + cpu;
+ asid = cpu_last_asid + cpu + 1;
flush_context();
set_mm_context(mm, asid);
@@ -144,13 +143,13 @@ void __new_context(struct mm_struct *mm)
* to start a new version and flush the TLB.
*/
if (unlikely((asid & ~ASID_MASK) == 0)) {
- asid = cpu_last_asid + smp_processor_id();
+ asid = cpu_last_asid + smp_processor_id() + 1;
flush_context();
#ifdef CONFIG_SMP
smp_wmb();
smp_call_function(reset_context, NULL, 1);
#endif
- cpu_last_asid += NR_CPUS - 1;
+ cpu_last_asid += NR_CPUS;
}
set_mm_context(mm, asid);
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 2c2cce9..c19571c 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -331,6 +331,12 @@ void __init arm_memblock_init(struct meminfo *mi, struct machine_desc *mdesc)
#endif
#ifdef CONFIG_BLK_DEV_INITRD
if (phys_initrd_size &&
+ !memblock_is_region_memory(phys_initrd_start, phys_initrd_size)) {
+ pr_err("INITRD: 0x%08lx+0x%08lx is not a memory region - disabling initrd\n",
+ phys_initrd_start, phys_initrd_size);
+ phys_initrd_start = phys_initrd_size = 0;
+ }
+ if (phys_initrd_size &&
memblock_is_region_reserved(phys_initrd_start, phys_initrd_size)) {
pr_err("INITRD: 0x%08lx+0x%08lx overlaps in-use memory region - disabling initrd\n",
phys_initrd_start, phys_initrd_size);
@@ -635,7 +641,8 @@ void __init mem_init(void)
" modules : 0x%08lx - 0x%08lx (%4ld MB)\n"
" .init : 0x%p" " - 0x%p" " (%4d kB)\n"
" .text : 0x%p" " - 0x%p" " (%4d kB)\n"
- " .data : 0x%p" " - 0x%p" " (%4d kB)\n",
+ " .data : 0x%p" " - 0x%p" " (%4d kB)\n"
+ " .bss : 0x%p" " - 0x%p" " (%4d kB)\n",
MLK(UL(CONFIG_VECTORS_BASE), UL(CONFIG_VECTORS_BASE) +
(PAGE_SIZE)),
@@ -657,7 +664,8 @@ void __init mem_init(void)
MLK_ROUNDUP(__init_begin, __init_end),
MLK_ROUNDUP(_text, _etext),
- MLK_ROUNDUP(_sdata, _edata));
+ MLK_ROUNDUP(_sdata, _edata),
+ MLK_ROUNDUP(__bss_start, __bss_stop));
#undef MLK
#undef MLM
diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S
index e4c165c..537ffcb 100644
--- a/arch/arm/mm/proc-arm7tdmi.S
+++ b/arch/arm/mm/proc-arm7tdmi.S
@@ -146,7 +146,7 @@ __arm7tdmi_proc_info:
.long 0
.long 0
.long v4_cache_fns
- .size __arm7tdmi_proc_info, . - __arm7dmi_proc_info
+ .size __arm7tdmi_proc_info, . - __arm7tdmi_proc_info
.type __triscenda7_proc_info, #object
__triscenda7_proc_info:
diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S
index 7b7ebd4..546b54d 100644
--- a/arch/arm/mm/proc-arm9tdmi.S
+++ b/arch/arm/mm/proc-arm9tdmi.S
@@ -116,7 +116,7 @@ __arm9tdmi_proc_info:
.long 0
.long 0
.long v4_cache_fns
- .size __arm9tdmi_proc_info, . - __arm9dmi_proc_info
+ .size __arm9tdmi_proc_info, . - __arm9tdmi_proc_info
.type __p2001_proc_info, #object
__p2001_proc_info:
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index b3b566e..3c38678 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -108,16 +108,18 @@ ENTRY(cpu_v7_switch_mm)
#ifdef CONFIG_ARM_ERRATA_430973
mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB
#endif
- mrc p15, 0, r2, c2, c0, 1 @ load TTB 1
- mcr p15, 0, r2, c2, c0, 0 @ into TTB 0
+#ifdef CONFIG_ARM_ERRATA_754322
+ dsb
+#endif
+ mcr p15, 0, r2, c13, c0, 1 @ set reserved context ID
+ isb
+1: mcr p15, 0, r0, c2, c0, 0 @ set TTB 0
isb
#ifdef CONFIG_ARM_ERRATA_754322
dsb
#endif
mcr p15, 0, r1, c13, c0, 1 @ set context ID
isb
- mcr p15, 0, r0, c2, c0, 0 @ set TTB 0
- isb
#endif
mov pc, lr
ENDPROC(cpu_v7_switch_mm)
diff --git a/arch/arm/plat-mxc/devices/platform-imx-dma.c b/arch/arm/plat-mxc/devices/platform-imx-dma.c
index 3538b85e..b130f60 100644
--- a/arch/arm/plat-mxc/devices/platform-imx-dma.c
+++ b/arch/arm/plat-mxc/devices/platform-imx-dma.c
@@ -139,7 +139,7 @@ static struct sdma_script_start_addrs addr_imx35_to2 = {
#endif
#ifdef CONFIG_SOC_IMX51
-static struct sdma_script_start_addrs addr_imx51_to1 = {
+static struct sdma_script_start_addrs addr_imx51 = {
.ap_2_ap_addr = 642,
.uart_2_mcu_addr = 817,
.mcu_2_app_addr = 747,
@@ -196,7 +196,9 @@ static int __init imxXX_add_imx_dma(void)
#if defined(CONFIG_SOC_IMX51)
if (cpu_is_mx51()) {
- imx51_imx_sdma_data.pdata.script_addrs = &addr_imx51_to1;
+ int to_version = mx51_revision() >> 4;
+ imx51_imx_sdma_data.pdata.to_version = to_version;
+ imx51_imx_sdma_data.pdata.script_addrs = &addr_imx51;
ret = imx_add_imx_sdma(&imx51_imx_sdma_data);
} else
#endif
diff --git a/arch/arm/plat-nomadik/include/plat/gpio.h b/arch/arm/plat-nomadik/include/plat/gpio.h
index ea19a5b..d5d7e65 100644
--- a/arch/arm/plat-nomadik/include/plat/gpio.h
+++ b/arch/arm/plat-nomadik/include/plat/gpio.h
@@ -90,6 +90,7 @@ struct nmk_gpio_platform_data {
int num_gpio;
u32 (*get_secondary_status)(unsigned int bank);
void (*set_ioforce)(bool enable);
+ bool supports_sleepmode;
};
#endif /* __ASM_PLAT_GPIO_H */
diff --git a/arch/arm/plat-omap/include/plat/flash.h b/arch/arm/plat-omap/include/plat/flash.h
index 3083195..0d88499 100644
--- a/arch/arm/plat-omap/include/plat/flash.h
+++ b/arch/arm/plat-omap/include/plat/flash.h
@@ -11,6 +11,7 @@
#include <linux/mtd/map.h>
+struct platform_device;
extern void omap1_set_vpp(struct platform_device *pdev, int enable);
#endif
diff --git a/arch/arm/plat-omap/include/plat/iovmm.h b/arch/arm/plat-omap/include/plat/iovmm.h
index 32a2f6c..e992b96 100644
--- a/arch/arm/plat-omap/include/plat/iovmm.h
+++ b/arch/arm/plat-omap/include/plat/iovmm.h
@@ -29,9 +29,6 @@ struct iovm_struct {
* lower 16 bit is used for h/w and upper 16 bit is for s/w.
*/
#define IOVMF_SW_SHIFT 16
-#define IOVMF_HW_SIZE (1 << IOVMF_SW_SHIFT)
-#define IOVMF_HW_MASK (IOVMF_HW_SIZE - 1)
-#define IOVMF_SW_MASK (~IOVMF_HW_MASK)UL
/*
* iovma: h/w flags derived from cam and ram attribute
diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h
index f38fef9..c7b8741 100644
--- a/arch/arm/plat-omap/include/plat/mmc.h
+++ b/arch/arm/plat-omap/include/plat/mmc.h
@@ -101,6 +101,9 @@ struct omap_mmc_platform_data {
/* If using power_saving and the MMC power is not to go off */
unsigned no_off:1;
+ /* eMMC does not handle power off when not in sleep state */
+ unsigned no_regulator_off_init:1;
+
/* Regulator off remapped to sleep */
unsigned vcc_aux_disable_is_sleep:1;
diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c
index 51ef43e..83a37c5 100644
--- a/arch/arm/plat-omap/iovmm.c
+++ b/arch/arm/plat-omap/iovmm.c
@@ -648,7 +648,6 @@ u32 iommu_vmap(struct iommu *obj, u32 da, const struct sg_table *sgt,
return PTR_ERR(va);
}
- flags &= IOVMF_HW_MASK;
flags |= IOVMF_DISCONT;
flags |= IOVMF_MMIO;
@@ -706,7 +705,6 @@ u32 iommu_vmalloc(struct iommu *obj, u32 da, size_t bytes, u32 flags)
if (!va)
return -ENOMEM;
- flags &= IOVMF_HW_MASK;
flags |= IOVMF_DISCONT;
flags |= IOVMF_ALLOC;
@@ -795,7 +793,6 @@ u32 iommu_kmap(struct iommu *obj, u32 da, u32 pa, size_t bytes,
if (!va)
return -ENOMEM;
- flags &= IOVMF_HW_MASK;
flags |= IOVMF_LINEAR;
flags |= IOVMF_MMIO;
@@ -853,7 +850,6 @@ u32 iommu_kmalloc(struct iommu *obj, u32 da, size_t bytes, u32 flags)
return -ENOMEM;
pa = virt_to_phys(va);
- flags &= IOVMF_HW_MASK;
flags |= IOVMF_LINEAR;
flags |= IOVMF_ALLOC;
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index a37b8eb..49fc0df 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -84,6 +84,7 @@
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/clkdev.h>
+#include <linux/pm_runtime.h>
#include <plat/omap_device.h>
#include <plat/omap_hwmod.h>
@@ -539,20 +540,34 @@ int omap_early_device_register(struct omap_device *od)
static int _od_runtime_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
+ int ret;
+
+ ret = pm_generic_runtime_suspend(dev);
+
+ if (!ret)
+ omap_device_idle(pdev);
+
+ return ret;
+}
- return omap_device_idle(pdev);
+static int _od_runtime_idle(struct device *dev)
+{
+ return pm_generic_runtime_idle(dev);
}
static int _od_runtime_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
- return omap_device_enable(pdev);
+ omap_device_enable(pdev);
+
+ return pm_generic_runtime_resume(dev);
}
static struct dev_power_domain omap_device_power_domain = {
.ops = {
.runtime_suspend = _od_runtime_suspend,
+ .runtime_idle = _od_runtime_idle,
.runtime_resume = _od_runtime_resume,
USE_PLATFORM_PM_SLEEP_OPS
}
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index a3f50b3..6af3d0b 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -166,7 +166,7 @@ static void __init omap_detect_sram(void)
else if (cpu_is_omap1611())
omap_sram_size = SZ_256K;
else {
- printk(KERN_ERR "Could not detect SRAM size\n");
+ pr_err("Could not detect SRAM size\n");
omap_sram_size = 0x4000;
}
}
@@ -221,10 +221,10 @@ static void __init omap_map_sram(void)
omap_sram_io_desc[0].length = ROUND_DOWN(omap_sram_size, PAGE_SIZE);
iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc));
- printk(KERN_INFO "SRAM: Mapped pa 0x%08lx to va 0x%08lx size: 0x%lx\n",
- __pfn_to_phys(omap_sram_io_desc[0].pfn),
- omap_sram_io_desc[0].virtual,
- omap_sram_io_desc[0].length);
+ pr_info("SRAM: Mapped pa 0x%08llx to va 0x%08lx size: 0x%lx\n",
+ (long long) __pfn_to_phys(omap_sram_io_desc[0].pfn),
+ omap_sram_io_desc[0].virtual,
+ omap_sram_io_desc[0].length);
/*
* Normally devicemaps_init() would flush caches and tlb after
@@ -252,7 +252,7 @@ static void __init omap_map_sram(void)
void *omap_sram_push_address(unsigned long size)
{
if (size > (omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ))) {
- printk(KERN_ERR "Not enough space in SRAM\n");
+ pr_err("Not enough space in SRAM\n");
return NULL;
}
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index c10d10c..2abf966 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -1199,7 +1199,7 @@ EXPORT_SYMBOL(s3c2410_dma_getposition);
#ifdef CONFIG_PM
-static void s3c2410_dma_suspend_chan(s3c2410_dma_chan *cp)
+static void s3c2410_dma_suspend_chan(struct s3c2410_dma_chan *cp)
{
printk(KERN_DEBUG "suspending dma channel %d\n", cp->number);
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index 9aee7e1..fc8c5f8 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -23,6 +23,7 @@
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
@@ -668,3 +669,8 @@ void __init s3c24xx_init_irq(void)
irqdbf("s3c2410: registered interrupt handlers\n");
}
+
+struct syscore_ops s3c24xx_irq_syscore_ops = {
+ .suspend = s3c24xx_irq_suspend,
+ .resume = s3c24xx_irq_resume,
+};
diff --git a/arch/arm/plat-s5p/dev-onenand.c b/arch/arm/plat-s5p/dev-onenand.c
index 6db9262..20336c8 100644
--- a/arch/arm/plat-s5p/dev-onenand.c
+++ b/arch/arm/plat-s5p/dev-onenand.c
@@ -15,8 +15,6 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/onenand.h>
#include <mach/irqs.h>
#include <mach/map.h>
@@ -45,13 +43,3 @@ struct platform_device s5p_device_onenand = {
.num_resources = ARRAY_SIZE(s5p_onenand_resources),
.resource = s5p_onenand_resources,
};
-
-void s5p_onenand_set_platdata(struct onenand_platform_data *pdata)
-{
- struct onenand_platform_data *pd;
-
- pd = kmemdup(pdata, sizeof(struct onenand_platform_data), GFP_KERNEL);
- if (!pd)
- printk(KERN_ERR "%s: no memory for platform data\n", __func__);
- s5p_device_onenand.dev.platform_data = pd;
-}
diff --git a/arch/arm/plat-s5p/include/plat/map-s5p.h b/arch/arm/plat-s5p/include/plat/map-s5p.h
index a6c3d32..d973d39 100644
--- a/arch/arm/plat-s5p/include/plat/map-s5p.h
+++ b/arch/arm/plat-s5p/include/plat/map-s5p.h
@@ -39,7 +39,7 @@
#define S5P_VA_TWD S5P_VA_COREPERI(0x600)
#define S5P_VA_GIC_DIST S5P_VA_COREPERI(0x1000)
-#define S5P_VA_USB_HSPHY S3C_ADDR(0x02900000)
+#define S3C_VA_USB_HSPHY S3C_ADDR(0x02900000)
#define VA_VIC(x) (S3C_VA_IRQ + ((x) * 0x10000))
#define VA_VIC0 VA_VIC(0)
diff --git a/arch/arm/plat-samsung/dev-onenand.c b/arch/arm/plat-samsung/dev-onenand.c
index 45ec732..f54ae71 100644
--- a/arch/arm/plat-samsung/dev-onenand.c
+++ b/arch/arm/plat-samsung/dev-onenand.c
@@ -13,8 +13,6 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/onenand.h>
#include <mach/irqs.h>
#include <mach/map.h>
@@ -43,13 +41,3 @@ struct platform_device s3c_device_onenand = {
.num_resources = ARRAY_SIZE(s3c_onenand_resources),
.resource = s3c_onenand_resources,
};
-
-void s3c_onenand_set_platdata(struct onenand_platform_data *pdata)
-{
- struct onenand_platform_data *pd;
-
- pd = kmemdup(pdata, sizeof(struct onenand_platform_data), GFP_KERNEL);
- if (!pd)
- printk(KERN_ERR "%s: no memory for platform data\n", __func__);
- s3c_device_onenand.dev.platform_data = pd;
-}
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index b61b8ee..4af108f 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -75,10 +75,8 @@ extern struct platform_device s5pc100_device_spi1;
extern struct platform_device s5pc100_device_spi2;
extern struct platform_device s5pv210_device_spi0;
extern struct platform_device s5pv210_device_spi1;
-extern struct platform_device s5p6440_device_spi0;
-extern struct platform_device s5p6440_device_spi1;
-extern struct platform_device s5p6450_device_spi0;
-extern struct platform_device s5p6450_device_spi1;
+extern struct platform_device s5p64x0_device_spi0;
+extern struct platform_device s5p64x0_device_spi1;
extern struct platform_device s3c_device_hwmon;