diff options
Diffstat (limited to 'arch/arm')
-rw-r--r-- | arch/arm/mach-omap2/board-4430sdp.c | 10 | ||||
-rw-r--r-- | arch/arm/mach-omap2/board-igep0020.c | 33 | ||||
-rw-r--r-- | arch/arm/mach-omap2/board-igep0030.c | 85 | ||||
-rw-r--r-- | arch/arm/mach-omap2/board-omap3beagle.c | 60 | ||||
-rw-r--r-- | arch/arm/mach-omap2/board-omap4panda.c | 10 | ||||
-rw-r--r-- | arch/arm/mach-omap2/board-zoom-peripherals.c | 4 | ||||
-rw-r--r-- | arch/arm/mach-omap2/clock3xxx_data.c | 2 | ||||
-rw-r--r-- | arch/arm/mach-omap2/clockdomain.h | 2 | ||||
-rw-r--r-- | arch/arm/mach-omap2/devices.c | 2 | ||||
-rw-r--r-- | arch/arm/mach-omap2/mux.c | 2 | ||||
-rw-r--r-- | arch/arm/mach-omap2/mux34xx.c | 4 | ||||
-rw-r--r-- | arch/arm/mach-omap2/mux44xx.c | 6 | ||||
-rw-r--r-- | arch/arm/mach-omap2/omap_twl.c | 10 | ||||
-rw-r--r-- | arch/arm/mach-omap2/pm_bus.c | 4 | ||||
-rw-r--r-- | arch/arm/mach-omap2/prm2xxx_3xxx.h | 63 | ||||
-rw-r--r-- | arch/arm/mach-omap2/sr_device.c | 1 | ||||
-rw-r--r-- | arch/arm/mach-omap2/wd_timer.c | 2 | ||||
-rw-r--r-- | arch/arm/mm/Kconfig | 2 | ||||
-rw-r--r-- | arch/arm/plat-omap/gpio.c | 12 | ||||
-rw-r--r-- | arch/arm/plat-omap/include/plat/voltage.h | 17 |
20 files changed, 280 insertions, 51 deletions
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index a70bdf2..07d1b20 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -554,6 +554,7 @@ static void __init omap_sfh7741prox_init(void) #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { + OMAP4_MUX(USBB2_ULPITLL_CLK, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), { .reg_offset = OMAP_MUX_TERMINATOR }, }; #else @@ -576,11 +577,12 @@ static void __init omap_4430sdp_init(void) omap4_twl6030_hsmmc_init(mmc); /* Power on the ULPI PHY */ - if (gpio_is_valid(OMAP4SDP_MDM_PWR_EN_GPIO)) { - /* FIXME: Assumes pad is already muxed for GPIO mode */ - gpio_request(OMAP4SDP_MDM_PWR_EN_GPIO, "USBB1 PHY VMDM_3V3"); + status = gpio_request(OMAP4SDP_MDM_PWR_EN_GPIO, "USBB1 PHY VMDM_3V3"); + if (status) + pr_err("%s: Could not get USBB1 PHY GPIO\n", __func__); + else gpio_direction_output(OMAP4SDP_MDM_PWR_EN_GPIO, 1); - } + usb_ehci_init(&ehci_pdata); usb_musb_init(&musb_board_data); diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index ebaa230..3be85a1 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -17,6 +17,7 @@ #include <linux/io.h> #include <linux/gpio.h> #include <linux/interrupt.h> +#include <linux/input.h> #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> @@ -541,6 +542,37 @@ static struct twl4030_codec_data igep2_codec_data = { .audio = &igep2_audio_data, }; +static int igep2_keymap[] = { + KEY(0, 0, KEY_LEFT), + KEY(0, 1, KEY_RIGHT), + KEY(0, 2, KEY_A), + KEY(0, 3, KEY_B), + KEY(1, 0, KEY_DOWN), + KEY(1, 1, KEY_UP), + KEY(1, 2, KEY_E), + KEY(1, 3, KEY_F), + KEY(2, 0, KEY_ENTER), + KEY(2, 1, KEY_I), + KEY(2, 2, KEY_J), + KEY(2, 3, KEY_K), + KEY(3, 0, KEY_M), + KEY(3, 1, KEY_N), + KEY(3, 2, KEY_O), + KEY(3, 3, KEY_P) +}; + +static struct matrix_keymap_data igep2_keymap_data = { + .keymap = igep2_keymap, + .keymap_size = ARRAY_SIZE(igep2_keymap), +}; + +static struct twl4030_keypad_data igep2_keypad_pdata = { + .keymap_data = &igep2_keymap_data, + .rows = 4, + .cols = 4, + .rep = 1, +}; + static struct twl4030_platform_data igep2_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, @@ -549,6 +581,7 @@ static struct twl4030_platform_data igep2_twldata = { .usb = &igep2_usb_data, .codec = &igep2_codec_data, .gpio = &igep2_twl4030_gpio_pdata, + .keypad = &igep2_keypad_pdata, .vmmc1 = &igep2_vmmc1, .vpll2 = &igep2_vpll2, .vio = &igep2_vio, diff --git a/arch/arm/mach-omap2/board-igep0030.c b/arch/arm/mach-omap2/board-igep0030.c index bcccd68..4dc62a9 100644 --- a/arch/arm/mach-omap2/board-igep0030.c +++ b/arch/arm/mach-omap2/board-igep0030.c @@ -19,6 +19,7 @@ #include <linux/interrupt.h> #include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> #include <linux/i2c/twl.h> #include <linux/mmc/host.h> @@ -43,7 +44,7 @@ #define IGEP3_GPIO_WIFI_NRESET 139 #define IGEP3_GPIO_BT_NRESET 137 -#define IGEP3_GPIO_USBH_NRESET 115 +#define IGEP3_GPIO_USBH_NRESET 183 #if defined(CONFIG_MTD_ONENAND_OMAP2) || \ @@ -103,7 +104,7 @@ static struct platform_device igep3_onenand_device = { }, }; -void __init igep3_flash_init(void) +static void __init igep3_flash_init(void) { u8 cs = 0; u8 onenandcs = GPMC_CS_NUM + 1; @@ -137,12 +138,11 @@ void __init igep3_flash_init(void) } #else -void __init igep3_flash_init(void) {} +static void __init igep3_flash_init(void) {} #endif -static struct regulator_consumer_supply igep3_vmmc1_supply = { - .supply = "vmmc", -}; +static struct regulator_consumer_supply igep3_vmmc1_supply = + REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0"); /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */ static struct regulator_init_data igep3_vmmc1 = { @@ -159,6 +159,52 @@ static struct regulator_init_data igep3_vmmc1 = { .consumer_supplies = &igep3_vmmc1_supply, }; +static struct regulator_consumer_supply igep3_vio_supply = + REGULATOR_SUPPLY("vmmc_aux", "mmci-omap-hs.1"); + +static struct regulator_init_data igep3_vio = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = 1, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &igep3_vio_supply, +}; + +static struct regulator_consumer_supply igep3_vmmc2_supply = + REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1"); + +static struct regulator_init_data igep3_vmmc2 = { + .constraints = { + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .always_on = 1, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &igep3_vmmc2_supply, +}; + +static struct fixed_voltage_config igep3_vwlan = { + .supply_name = "vwlan", + .microvolts = 3300000, + .gpio = -EINVAL, + .enabled_at_boot = 1, + .init_data = &igep3_vmmc2, +}; + +static struct platform_device igep3_vwlan_device = { + .name = "reg-fixed-voltage", + .id = 0, + .dev = { + .platform_data = &igep3_vwlan, + }, +}; + static struct omap2_hsmmc_info mmc[] = { [0] = { .mmc = 1, @@ -254,12 +300,6 @@ static int igep3_twl4030_gpio_setup(struct device *dev, mmc[0].gpio_cd = gpio + 0; omap2_hsmmc_init(mmc); - /* - * link regulators to MMC adapters ... we "know" the - * regulators will be set up only *after* we return. - */ - igep3_vmmc1_supply.dev = mmc[0].dev; - /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ #if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE) if ((gpio_request(gpio+TWL4030_GPIO_MAX+1, "gpio-led:green:d1") == 0) @@ -287,6 +327,10 @@ static struct twl4030_usb_data igep3_twl4030_usb_data = { .usb_mode = T2_USB_MODE_ULPI, }; +static struct platform_device *igep3_devices[] __initdata = { + &igep3_vwlan_device, +}; + static void __init igep3_init_irq(void) { omap2_init_common_infrastructure(); @@ -303,6 +347,7 @@ static struct twl4030_platform_data igep3_twl4030_pdata = { .usb = &igep3_twl4030_usb_data, .gpio = &igep3_twl4030_gpio_pdata, .vmmc1 = &igep3_vmmc1, + .vio = &igep3_vio, }; static struct i2c_board_info __initdata igep3_i2c_boardinfo[] = { @@ -363,8 +408,20 @@ static void __init igep3_wifi_bt_init(void) void __init igep3_wifi_bt_init(void) {} #endif +static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { + .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN, + .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + + .phy_reset = true, + .reset_gpio_port[0] = -EINVAL, + .reset_gpio_port[1] = IGEP3_GPIO_USBH_NRESET, + .reset_gpio_port[2] = -EINVAL, +}; + #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { + OMAP3_MUX(I2C2_SDA, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), { .reg_offset = OMAP_MUX_TERMINATOR }, }; #endif @@ -375,9 +432,10 @@ static void __init igep3_init(void) /* Register I2C busses and drivers */ igep3_i2c_init(); - + platform_add_devices(igep3_devices, ARRAY_SIZE(igep3_devices)); omap_serial_init(); usb_musb_init(&musb_board_data); + usb_ehci_init(&ehci_pdata); igep3_flash_init(); igep3_leds_init(); @@ -392,6 +450,7 @@ static void __init igep3_init(void) MACHINE_START(IGEP0030, "IGEP OMAP3 module") .boot_params = 0x80000100, + .reserve = omap_reserve, .map_io = omap3_map_io, .init_irq = igep3_init_irq, .init_machine = igep3_init, diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index a4fe8e1..46d814a 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -207,7 +207,7 @@ static struct omap_dss_device beagle_dvi_device = { .driver_name = "generic_dpi_panel", .data = &dvi_panel, .phy.dpi.data_lines = 24, - .reset_gpio = 170, + .reset_gpio = -EINVAL, }; static struct omap_dss_device beagle_tv_device = { @@ -279,6 +279,8 @@ static struct gpio_led gpio_leds[]; static int beagle_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { + int r; + if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) { mmc[0].gpio_wp = -EINVAL; } else if ((omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C1_3) || @@ -299,17 +301,63 @@ static int beagle_twl_gpio_setup(struct device *dev, /* REVISIT: need ehci-omap hooks for external VBUS * power switch and overcurrent detect */ + if (omap3_beagle_get_rev() != OMAP3BEAGLE_BOARD_XM) { + r = gpio_request(gpio + 1, "EHCI_nOC"); + if (!r) { + r = gpio_direction_input(gpio + 1); + if (r) + gpio_free(gpio + 1); + } + if (r) + pr_err("%s: unable to configure EHCI_nOC\n", __func__); + } - gpio_request(gpio + 1, "EHCI_nOC"); - gpio_direction_input(gpio + 1); - - /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */ + /* + * TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, XM active + * high / others active low) + */ gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR"); - gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0); + if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) + gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1); + else + gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0); + + /* DVI reset GPIO is different between beagle revisions */ + if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) + beagle_dvi_device.reset_gpio = 129; + else + beagle_dvi_device.reset_gpio = 170; /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; + /* + * gpio + 1 on Xm controls the TFP410's enable line (active low) + * gpio + 2 control varies depending on the board rev as follows: + * P7/P8 revisions(prototype): Camera EN + * A2+ revisions (production): LDO (supplies DVI, serial, led blocks) + */ + if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) { + r = gpio_request(gpio + 1, "nDVI_PWR_EN"); + if (!r) { + r = gpio_direction_output(gpio + 1, 0); + if (r) + gpio_free(gpio + 1); + } + if (r) + pr_err("%s: unable to configure nDVI_PWR_EN\n", + __func__); + r = gpio_request(gpio + 2, "DVI_LDO_EN"); + if (!r) { + r = gpio_direction_output(gpio + 2, 1); + if (r) + gpio_free(gpio + 2); + } + if (r) + pr_err("%s: unable to configure DVI_LDO_EN\n", + __func__); + } + return 0; } diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 3094e20..e001a04 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -19,6 +19,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> +#include <linux/clk.h> #include <linux/io.h> #include <linux/leds.h> #include <linux/gpio.h> @@ -95,7 +96,16 @@ static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { static void __init omap4_ehci_init(void) { int ret; + struct clk *phy_ref_clk; + /* FREF_CLK3 provides the 19.2 MHz reference clock to the PHY */ + phy_ref_clk = clk_get(NULL, "auxclk3_ck"); + if (IS_ERR(phy_ref_clk)) { + pr_err("Cannot request auxclk3\n"); + goto error1; + } + clk_set_rate(phy_ref_clk, 19200000); + clk_enable(phy_ref_clk); /* disable the power to the usb hub prior to init */ ret = gpio_request(GPIO_HUB_POWER, "hub_power"); diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 14d95af..e0e040f 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -192,7 +192,7 @@ static struct platform_device omap_vwlan_device = { }, }; -struct wl12xx_platform_data omap_zoom_wlan_data __initdata = { +static struct wl12xx_platform_data omap_zoom_wlan_data __initdata = { .irq = OMAP_GPIO_IRQ(OMAP_ZOOM_WLAN_IRQ_GPIO), /* ZOOM ref clock is 26 MHz */ .board_ref_clock = 1, @@ -286,7 +286,7 @@ static int zoom_twl_gpio_setup(struct device *dev, } /* EXTMUTE callback function */ -void zoom2_set_hs_extmute(int mute) +static void zoom2_set_hs_extmute(int mute) { gpio_set_value(ZOOM2_HEADSET_EXTMUTE_GPIO, mute); } diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index d3ab1c9..403a4a1 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -3286,7 +3286,7 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "cpefuse_fck", &cpefuse_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "ts_fck", &ts_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("ehci-omap.0", "usbtll_fck", &usbtll_fck, CK_3430ES2 | CK_AM35XX), + CLK("ehci-omap.0", "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK("omap-mcbsp.1", "prcm_fck", &core_96m_fck, CK_3XXX), CLK("omap-mcbsp.5", "prcm_fck", &core_96m_fck, CK_3XXX), CLK(NULL, "core_96m_fck", &core_96m_fck, CK_3XXX), diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h index de3faa2..9b459c2 100644 --- a/arch/arm/mach-omap2/clockdomain.h +++ b/arch/arm/mach-omap2/clockdomain.h @@ -103,9 +103,7 @@ struct clockdomain { const char *name; struct powerdomain *ptr; } pwrdm; -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) const u16 clktrctrl_mask; -#endif const u8 flags; const u8 dep_bit; const u8 prcm_partition; diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 381f4eb..2c9c912 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -978,7 +978,7 @@ static int __init omap2_init_devices(void) arch_initcall(omap2_init_devices); #if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE) -struct omap_device_pm_latency omap_wdt_latency[] = { +static struct omap_device_pm_latency omap_wdt_latency[] = { [0] = { .deactivate_func = omap_device_idle_hwmods, .activate_func = omap_device_enable_hwmods, diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 17bd639..df8d2f2 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -893,7 +893,7 @@ static struct omap_mux * __init omap_mux_list_add( return NULL; m = &entry->mux; - memcpy(m, src, sizeof(struct omap_mux_entry)); + entry->mux = *src; #ifdef CONFIG_OMAP_MUX if (omap_mux_copy_names(src, m)) { diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c index 440c98e..17f80e4 100644 --- a/arch/arm/mach-omap2/mux34xx.c +++ b/arch/arm/mach-omap2/mux34xx.c @@ -703,7 +703,7 @@ static struct omap_mux __initdata omap3_muxmodes[] = { * Signals different on CBC package compared to the superset */ #if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBC) -struct omap_mux __initdata omap3_cbc_subset[] = { +static struct omap_mux __initdata omap3_cbc_subset[] = { { .reg_offset = OMAP_MUX_TERMINATOR }, }; #else @@ -721,7 +721,7 @@ struct omap_mux __initdata omap3_cbc_subset[] = { */ #if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \ && defined(CONFIG_OMAP_PACKAGE_CBC) -struct omap_ball __initdata omap3_cbc_ball[] = { +static struct omap_ball __initdata omap3_cbc_ball[] = { _OMAP3_BALLENTRY(CAM_D0, "ae16", NULL), _OMAP3_BALLENTRY(CAM_D1, "ae15", NULL), _OMAP3_BALLENTRY(CAM_D10, "d25", NULL), diff --git a/arch/arm/mach-omap2/mux44xx.c b/arch/arm/mach-omap2/mux44xx.c index 980f11d..c322e7b 100644 --- a/arch/arm/mach-omap2/mux44xx.c +++ b/arch/arm/mach-omap2/mux44xx.c @@ -544,7 +544,7 @@ static struct omap_mux __initdata omap4_core_muxmodes[] = { */ #if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \ && defined(CONFIG_OMAP_PACKAGE_CBL) -struct omap_ball __initdata omap4_core_cbl_ball[] = { +static struct omap_ball __initdata omap4_core_cbl_ball[] = { _OMAP4_BALLENTRY(GPMC_AD0, "c12", NULL), _OMAP4_BALLENTRY(GPMC_AD1, "d12", NULL), _OMAP4_BALLENTRY(GPMC_AD2, "c13", NULL), @@ -1262,7 +1262,7 @@ static struct omap_mux __initdata omap4_es2_core_muxmodes[] = { */ #if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \ && defined(CONFIG_OMAP_PACKAGE_CBS) -struct omap_ball __initdata omap4_core_cbs_ball[] = { +static struct omap_ball __initdata omap4_core_cbs_ball[] = { _OMAP4_BALLENTRY(GPMC_AD0, "c12", NULL), _OMAP4_BALLENTRY(GPMC_AD1, "d12", NULL), _OMAP4_BALLENTRY(GPMC_AD2, "c13", NULL), @@ -1546,7 +1546,7 @@ static struct omap_mux __initdata omap4_wkup_muxmodes[] = { */ #if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \ && defined(CONFIG_OMAP_PACKAGE_CBL) -struct omap_ball __initdata omap4_wkup_cbl_cbs_ball[] = { +static struct omap_ball __initdata omap4_wkup_cbl_cbs_ball[] = { _OMAP4_BALLENTRY(SIM_IO, "h4", NULL), _OMAP4_BALLENTRY(SIM_CLK, "j2", NULL), _OMAP4_BALLENTRY(SIM_RESET, "g2", NULL), diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c index 15f8c6c..00e1d2b 100644 --- a/arch/arm/mach-omap2/omap_twl.c +++ b/arch/arm/mach-omap2/omap_twl.c @@ -20,6 +20,8 @@ #include <plat/voltage.h> +#include "pm.h" + #define OMAP3_SRI2C_SLAVE_ADDR 0x12 #define OMAP3_VDD_MPU_SR_CONTROL_REG 0x00 #define OMAP3_VDD_CORE_SR_CONTROL_REG 0x01 @@ -60,17 +62,17 @@ static u8 smps_offset; #define REG_SMPS_OFFSET 0xE0 -unsigned long twl4030_vsel_to_uv(const u8 vsel) +static unsigned long twl4030_vsel_to_uv(const u8 vsel) { return (((vsel * 125) + 6000)) * 100; } -u8 twl4030_uv_to_vsel(unsigned long uv) +static u8 twl4030_uv_to_vsel(unsigned long uv) { return DIV_ROUND_UP(uv - 600000, 12500); } -unsigned long twl6030_vsel_to_uv(const u8 vsel) +static unsigned long twl6030_vsel_to_uv(const u8 vsel) { /* * In TWL6030 depending on the value of SMPS_OFFSET @@ -102,7 +104,7 @@ unsigned long twl6030_vsel_to_uv(const u8 vsel) return ((((vsel - 1) * 125) + 6000)) * 100; } -u8 twl6030_uv_to_vsel(unsigned long uv) +static u8 twl6030_uv_to_vsel(unsigned long uv) { /* * In TWL6030 depending on the value of SMPS_OFFSET diff --git a/arch/arm/mach-omap2/pm_bus.c b/arch/arm/mach-omap2/pm_bus.c index 784989f..5acd2ab 100644 --- a/arch/arm/mach-omap2/pm_bus.c +++ b/arch/arm/mach-omap2/pm_bus.c @@ -20,7 +20,7 @@ #include <plat/omap-pm.h> #ifdef CONFIG_PM_RUNTIME -int omap_pm_runtime_suspend(struct device *dev) +static int omap_pm_runtime_suspend(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); int r, ret = 0; @@ -37,7 +37,7 @@ int omap_pm_runtime_suspend(struct device *dev) return ret; }; -int omap_pm_runtime_resume(struct device *dev) +static int omap_pm_runtime_resume(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); int r; diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.h b/arch/arm/mach-omap2/prm2xxx_3xxx.h index 53d44f6..49654c8 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.h +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.h @@ -228,7 +228,67 @@ #ifndef __ASSEMBLER__ - +/* + * Stub omap2xxx/omap3xxx functions so that common files + * continue to build when custom builds are used + */ +#if defined(CONFIG_ARCH_OMAP4) && !(defined(CONFIG_ARCH_OMAP2) || \ + defined(CONFIG_ARCH_OMAP3)) +static inline u32 omap2_prm_read_mod_reg(s16 module, u16 idx) +{ + WARN(1, "prm: omap2xxx/omap3xxx specific function and " + "not suppose to be used on omap4\n"); + return 0; +} +static inline void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx) +{ + WARN(1, "prm: omap2xxx/omap3xxx specific function and " + "not suppose to be used on omap4\n"); +} +static inline u32 omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits, + s16 module, s16 idx) +{ + WARN(1, "prm: omap2xxx/omap3xxx specific function and " + "not suppose to be used on omap4\n"); + return 0; +} +static inline u32 omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx) +{ + WARN(1, "prm: omap2xxx/omap3xxx specific function and " + "not suppose to be used on omap4\n"); + return 0; +} +static inline u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx) +{ + WARN(1, "prm: omap2xxx/omap3xxx specific function and " + "not suppose to be used on omap4\n"); + return 0; +} +static inline u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask) +{ + WARN(1, "prm: omap2xxx/omap3xxx specific function and " + "not suppose to be used on omap4\n"); + return 0; +} +static inline int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift) +{ + WARN(1, "prm: omap2xxx/omap3xxx specific function and " + "not suppose to be used on omap4\n"); + return 0; +} +static inline int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift) +{ + WARN(1, "prm: omap2xxx/omap3xxx specific function and " + "not suppose to be used on omap4\n"); + return 0; +} +static inline int omap2_prm_deassert_hardreset(s16 prm_mod, u8 shift) +{ + WARN(1, "prm: omap2xxx/omap3xxx specific function and " + "not suppose to be used on omap4\n"); + return 0; +} +#else /* Power/reset management domain register get/set */ extern u32 omap2_prm_read_mod_reg(s16 module, u16 idx); extern void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx); @@ -242,6 +302,7 @@ extern int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift); extern int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift); extern int omap2_prm_deassert_hardreset(s16 prm_mod, u8 shift); +#endif /* CONFIG_ARCH_OMAP4 */ #endif /* diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c index 786d685..b1e0af1 100644 --- a/arch/arm/mach-omap2/sr_device.c +++ b/arch/arm/mach-omap2/sr_device.c @@ -27,6 +27,7 @@ #include <plat/voltage.h> #include "control.h" +#include "pm.h" static bool sr_enable_on_init; diff --git a/arch/arm/mach-omap2/wd_timer.c b/arch/arm/mach-omap2/wd_timer.c index b0c4907..4067669 100644 --- a/arch/arm/mach-omap2/wd_timer.c +++ b/arch/arm/mach-omap2/wd_timer.c @@ -13,6 +13,8 @@ #include <plat/omap_hwmod.h> +#include "wd_timer.h" + /* * In order to avoid any assumptions from bootloader regarding WDT * settings, WDT module is reset during init. This enables the watchdog diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index fcc1e62..9d30c6f 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -644,7 +644,7 @@ config ARM_THUMBEE config SWP_EMULATE bool "Emulate SWP/SWPB instructions" - depends on CPU_V7 + depends on CPU_V7 && !CPU_V6 select HAVE_PROC_CPU if PROC_FS default y if SMP help diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 1f98e0b..ccf2660 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -718,7 +718,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) case METHOD_GPIO_24XX: case METHOD_GPIO_44XX: set_24xx_gpio_triggering(bank, gpio, trigger); - break; + return 0; #endif default: goto bad; @@ -756,8 +756,10 @@ static int gpio_irq_type(unsigned irq, unsigned type) spin_lock_irqsave(&bank->lock, flags); retval = _set_gpio_triggering(bank, get_gpio_index(gpio), type); if (retval == 0) { - irq_desc[irq].status &= ~IRQ_TYPE_SENSE_MASK; - irq_desc[irq].status |= type; + struct irq_desc *d = irq_to_desc(irq); + + d->status &= ~IRQ_TYPE_SENSE_MASK; + d->status |= type; } spin_unlock_irqrestore(&bank->lock, flags); @@ -1671,7 +1673,9 @@ static void __init omap_gpio_chip_init(struct gpio_bank *bank) for (j = bank->virtual_irq_start; j < bank->virtual_irq_start + bank_width; j++) { - lockdep_set_class(&irq_desc[j].lock, &gpio_lock_class); + struct irq_desc *d = irq_to_desc(j); + + lockdep_set_class(&d->lock, &gpio_lock_class); set_irq_chip_data(j, bank); if (bank_is_mpuio(bank)) set_irq_chip(j, &mpuio_irq_chip); diff --git a/arch/arm/plat-omap/include/plat/voltage.h b/arch/arm/plat-omap/include/plat/voltage.h index 0ff1233..5bd204e 100644 --- a/arch/arm/plat-omap/include/plat/voltage.h +++ b/arch/arm/plat-omap/include/plat/voltage.h @@ -14,6 +14,8 @@ #ifndef __ARCH_ARM_MACH_OMAP2_VOLTAGE_H #define __ARCH_ARM_MACH_OMAP2_VOLTAGE_H +#include <linux/err.h> + #define VOLTSCALE_VPFORCEUPDATE 1 #define VOLTSCALE_VCBYPASS 2 @@ -65,9 +67,6 @@ struct voltagedomain { char *name; }; -/* API to get the voltagedomain pointer */ -struct voltagedomain *omap_voltage_domain_lookup(char *name); - /** * struct omap_volt_data - Omap voltage specific data. * @voltage_nominal: The possible voltage value in uV @@ -131,16 +130,26 @@ int omap_voltage_register_pmic(struct voltagedomain *voltdm, struct omap_volt_pmic_info *pmic_info); void omap_change_voltscale_method(struct voltagedomain *voltdm, int voltscale_method); +/* API to get the voltagedomain pointer */ +struct voltagedomain *omap_voltage_domain_lookup(char *name); + int omap_voltage_late_init(void); #else static inline int omap_voltage_register_pmic(struct voltagedomain *voltdm, - struct omap_volt_pmic_info *pmic_info) {} + struct omap_volt_pmic_info *pmic_info) +{ + return -EINVAL; +} static inline void omap_change_voltscale_method(struct voltagedomain *voltdm, int voltscale_method) {} static inline int omap_voltage_late_init(void) { return -EINVAL; } +static inline struct voltagedomain *omap_voltage_domain_lookup(char *name) +{ + return ERR_PTR(-EINVAL); +} #endif #endif |