summaryrefslogtreecommitdiff
path: root/arch/arm
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/Kconfig1
-rw-r--r--arch/arm/Makefile2
-rw-r--r--arch/arm/mach-mx25/clock.c58
-rw-r--r--arch/arm/mach-mx25/mx25pdk.c2
-rw-r--r--arch/arm/mach-mx3/mx31ads.c4
-rw-r--r--arch/arm/mach-omap2/gpmc.c5
-rw-r--r--arch/arm/mach-omap2/irq.c4
-rw-r--r--arch/arm/mach-omap2/mmc-twl4030.c7
-rw-r--r--arch/arm/mach-omap2/mux.c10
-rw-r--r--arch/arm/mach-omap2/mux34xx.c47
-rw-r--r--arch/arm/mach-omap2/serial.c11
-rw-r--r--arch/arm/mach-realview/realview_pbx.c4
-rw-r--r--arch/arm/mm/proc-arm6_7.S2
-rw-r--r--arch/arm/plat-mxc/audmux-v2.c137
-rw-r--r--arch/arm/plat-mxc/include/mach/board-mx31lite.h2
-rw-r--r--arch/arm/plat-mxc/include/mach/common.h2
-rw-r--r--arch/arm/plat-mxc/include/mach/iomux-mx35.h2
-rw-r--r--arch/arm/plat-mxc/include/mach/irqs.h5
-rw-r--r--arch/arm/plat-omap/clock.c4
-rw-r--r--arch/arm/plat-omap/gpio.c4
-rw-r--r--arch/arm/plat-omap/omap_device.c10
-rw-r--r--arch/arm/vfp/vfpmodule.c5
22 files changed, 278 insertions, 50 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 4c33ca8..184a6bd 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -702,6 +702,7 @@ config ARCH_OMAP
select ARCH_HAS_CPUFREQ
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
+ select ARCH_HAS_HOLES_MEMORYMODEL
help
Support for TI's OMAP platform (OMAP1 and OMAP2).
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 9e75825..356d702 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -94,7 +94,7 @@ CFLAGS_ABI +=-funwind-tables
endif
ifeq ($(CONFIG_THUMB2_KERNEL),y)
-AFLAGS_AUTOIT :=$(call as-option,-Wa$(comma)-mimplicit-it=thumb,-Wa$(comma)-mauto-it)
+AFLAGS_AUTOIT :=$(call as-option,-Wa$(comma)-mimplicit-it=always,-Wa$(comma)-mauto-it)
AFLAGS_NOWARN :=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W)
CFLAGS_THUMB2 :=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN)
AFLAGS_THUMB2 :=$(CFLAGS_THUMB2) -Wa$(comma)-mthumb
diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c
index 6e838b8..6acc88b 100644
--- a/arch/arm/mach-mx25/clock.c
+++ b/arch/arm/mach-mx25/clock.c
@@ -119,6 +119,11 @@ static unsigned long get_rate_nfc(struct clk *clk)
return get_rate_per(8);
}
+static unsigned long get_rate_gpt(struct clk *clk)
+{
+ return get_rate_per(5);
+}
+
static unsigned long get_rate_otg(struct clk *clk)
{
return 48000000; /* FIXME */
@@ -144,7 +149,7 @@ static void clk_cgcr_disable(struct clk *clk)
__raw_writel(reg, clk->enable_reg);
}
-#define DEFINE_CLOCK(name, i, er, es, gr, sr) \
+#define DEFINE_CLOCK(name, i, er, es, gr, sr, s) \
static struct clk name = { \
.id = i, \
.enable_reg = CRM_BASE + er, \
@@ -153,27 +158,30 @@ static void clk_cgcr_disable(struct clk *clk)
.set_rate = sr, \
.enable = clk_cgcr_enable, \
.disable = clk_cgcr_disable, \
+ .secondary = s, \
}
-DEFINE_CLOCK(gpt_clk, 0, CCM_CGCR0, 5, get_rate_ipg, NULL);
-DEFINE_CLOCK(cspi1_clk, 0, CCM_CGCR1, 5, get_rate_ipg, NULL);
-DEFINE_CLOCK(cspi2_clk, 0, CCM_CGCR1, 6, get_rate_ipg, NULL);
-DEFINE_CLOCK(cspi3_clk, 0, CCM_CGCR1, 7, get_rate_ipg, NULL);
-DEFINE_CLOCK(uart1_clk, 0, CCM_CGCR2, 14, get_rate_uart, NULL);
-DEFINE_CLOCK(uart2_clk, 0, CCM_CGCR2, 15, get_rate_uart, NULL);
-DEFINE_CLOCK(uart3_clk, 0, CCM_CGCR2, 16, get_rate_uart, NULL);
-DEFINE_CLOCK(uart4_clk, 0, CCM_CGCR2, 17, get_rate_uart, NULL);
-DEFINE_CLOCK(uart5_clk, 0, CCM_CGCR2, 18, get_rate_uart, NULL);
-DEFINE_CLOCK(nfc_clk, 0, CCM_CGCR0, 8, get_rate_nfc, NULL);
-DEFINE_CLOCK(usbotg_clk, 0, CCM_CGCR0, 28, get_rate_otg, NULL);
-DEFINE_CLOCK(pwm1_clk, 0, CCM_CGCR1, 31, get_rate_ipg, NULL);
-DEFINE_CLOCK(pwm2_clk, 0, CCM_CGCR2, 0, get_rate_ipg, NULL);
-DEFINE_CLOCK(pwm3_clk, 0, CCM_CGCR2, 1, get_rate_ipg, NULL);
-DEFINE_CLOCK(pwm4_clk, 0, CCM_CGCR2, 2, get_rate_ipg, NULL);
-DEFINE_CLOCK(kpp_clk, 0, CCM_CGCR1, 28, get_rate_ipg, NULL);
-DEFINE_CLOCK(tsc_clk, 0, CCM_CGCR2, 13, get_rate_ipg, NULL);
-DEFINE_CLOCK(i2c_clk, 0, CCM_CGCR0, 6, get_rate_i2c, NULL);
-DEFINE_CLOCK(fec_clk, 0, CCM_CGCR0, 23, get_rate_ipg, NULL);
+DEFINE_CLOCK(gpt_clk, 0, CCM_CGCR0, 5, get_rate_gpt, NULL, NULL);
+DEFINE_CLOCK(uart_per_clk, 0, CCM_CGCR0, 15, get_rate_uart, NULL, NULL);
+DEFINE_CLOCK(cspi1_clk, 0, CCM_CGCR1, 5, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(cspi2_clk, 0, CCM_CGCR1, 6, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(cspi3_clk, 0, CCM_CGCR1, 7, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(fec_ahb_clk, 0, CCM_CGCR0, 23, NULL, NULL, NULL);
+DEFINE_CLOCK(uart1_clk, 0, CCM_CGCR2, 14, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(uart2_clk, 0, CCM_CGCR2, 15, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(uart3_clk, 0, CCM_CGCR2, 16, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(uart4_clk, 0, CCM_CGCR2, 17, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(uart5_clk, 0, CCM_CGCR2, 18, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(nfc_clk, 0, CCM_CGCR0, 8, get_rate_nfc, NULL, NULL);
+DEFINE_CLOCK(usbotg_clk, 0, CCM_CGCR0, 28, get_rate_otg, NULL, NULL);
+DEFINE_CLOCK(pwm1_clk, 0, CCM_CGCR1, 31, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(pwm2_clk, 0, CCM_CGCR2, 0, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(pwm3_clk, 0, CCM_CGCR2, 1, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(pwm4_clk, 0, CCM_CGCR2, 2, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(kpp_clk, 0, CCM_CGCR1, 28, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(tsc_clk, 0, CCM_CGCR2, 13, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(i2c_clk, 0, CCM_CGCR0, 6, get_rate_i2c, NULL, NULL);
+DEFINE_CLOCK(fec_clk, 0, CCM_CGCR1, 15, get_rate_ipg, NULL, &fec_ahb_clk);
#define _REGISTER_CLOCK(d, n, c) \
{ \
@@ -208,13 +216,21 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK("fec.0", NULL, fec_clk)
};
-int __init mx25_clocks_init(unsigned long fref)
+int __init mx25_clocks_init(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(lookups); i++)
clkdev_add(&lookups[i]);
+ /* Turn off all clocks except the ones we need to survive, namely:
+ * EMI, GPIO1-3 (CCM_CGCR1[18:16]), GPT1, IOMUXC (CCM_CGCR1[27]), IIM,
+ * SCC
+ */
+ __raw_writel((1 << 19), CRM_BASE + CCM_CGCR0);
+ __raw_writel((0xf << 16) | (3 << 26), CRM_BASE + CCM_CGCR1);
+ __raw_writel((1 << 5), CRM_BASE + CCM_CGCR2);
+
mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
return 0;
diff --git a/arch/arm/mach-mx25/mx25pdk.c b/arch/arm/mach-mx25/mx25pdk.c
index 921bc99..6f06089 100644
--- a/arch/arm/mach-mx25/mx25pdk.c
+++ b/arch/arm/mach-mx25/mx25pdk.c
@@ -91,7 +91,7 @@ static void __init mx25pdk_init(void)
static void __init mx25pdk_timer_init(void)
{
- mx25_clocks_init(26000000);
+ mx25_clocks_init();
}
static struct sys_timer mx25pdk_timer = {
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index 3e7bafa..938c549 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -173,6 +173,7 @@ static void expio_unmask_irq(u32 irq)
}
static struct irq_chip expio_irq_chip = {
+ .name = "EXPIO(CPLD)",
.ack = expio_ack_irq,
.mask = expio_mask_irq,
.unmask = expio_unmask_irq,
@@ -302,6 +303,7 @@ static struct regulator_init_data ldo1_data = {
.min_uV = 2800000,
.max_uV = 2800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
.apply_uV = 1,
},
};
@@ -322,6 +324,7 @@ static struct regulator_init_data ldo2_data = {
.min_uV = 3300000,
.max_uV = 3300000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
.apply_uV = 1,
},
.num_consumer_supplies = ARRAY_SIZE(ldo2_consumers),
@@ -459,6 +462,7 @@ static int mx31_wm8350_init(struct wm8350 *wm8350)
static struct wm8350_platform_data __initdata mx31_wm8350_pdata = {
.init = mx31_wm8350_init,
+ .irq_base = MXC_BOARD_IRQ_START + MXC_MAX_EXP_IO_LINES,
};
#endif
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 3f1334f..7027cdc 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -505,7 +505,7 @@ static void __init gpmc_mem_init(void)
void __init gpmc_init(void)
{
u32 l;
- char *ck;
+ char *ck = NULL;
if (cpu_is_omap24xx()) {
ck = "core_l3_ck";
@@ -521,6 +521,9 @@ void __init gpmc_init(void)
l = OMAP44XX_GPMC_BASE;
}
+ if (WARN_ON(!ck))
+ return;
+
gpmc_l3_clk = clk_get(NULL, ck);
if (IS_ERR(gpmc_l3_clk)) {
printk(KERN_ERR "Could not get GPMC clock %s\n", ck);
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 2705402..26aeef5 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -194,7 +194,7 @@ void __init omap_init_irq(void)
int i;
for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
- unsigned long base;
+ unsigned long base = 0;
struct omap_irq_bank *bank = irq_banks + i;
if (cpu_is_omap24xx())
@@ -202,6 +202,8 @@ void __init omap_init_irq(void)
else if (cpu_is_omap34xx())
base = OMAP34XX_IC_BASE;
+ BUG_ON(!base);
+
/* Static mapping, never released */
bank->base_reg = ioremap(base, SZ_4K);
if (!bank->base_reg) {
diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
index 0c3c72d..8afe9dd 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -408,6 +408,7 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
{
struct twl4030_hsmmc_info *c;
int nr_hsmmc = ARRAY_SIZE(hsmmc_data);
+ int i;
if (cpu_is_omap2430()) {
control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE;
@@ -434,7 +435,7 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
mmc = kzalloc(sizeof(struct omap_mmc_platform_data), GFP_KERNEL);
if (!mmc) {
pr_err("Cannot allocate memory for mmc device!\n");
- return;
+ goto done;
}
if (c->name)
@@ -532,6 +533,10 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
continue;
c->dev = mmc->dev;
}
+
+done:
+ for (i = 0; i < nr_hsmmc; i++)
+ kfree(hsmmc_data[i]);
}
#endif
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 3f59bd1..5fedc50 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -486,7 +486,7 @@ int __init omap_mux_init_signal(char *muxname, int val)
static inline void omap_mux_decode(struct seq_file *s, u16 val)
{
char *flags[OMAP_MUX_MAX_NR_FLAGS];
- char mode[14];
+ char mode[sizeof("OMAP_MUX_MODE") + 1];
int i = -1;
sprintf(mode, "OMAP_MUX_MODE%d", val & 0x7);
@@ -553,6 +553,7 @@ static int omap_mux_dbg_board_show(struct seq_file *s, void *unused)
if (!m0_name)
continue;
+ /* REVISIT: Needs to be updated if mode0 names get longer */
for (i = 0; i < OMAP_MUX_DEFNAME_LEN; i++) {
if (m0_name[i] == '\0') {
m0_def[i] = m0_name[i];
@@ -968,6 +969,13 @@ static void __init omap_mux_init_list(struct omap_mux *superset)
}
#endif
+#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS)
+ if (!superset->muxnames || !superset->muxnames[0]) {
+ superset++;
+ continue;
+ }
+#endif
+
entry = omap_mux_list_add(superset);
if (!entry) {
printk(KERN_ERR "mux: Could not add entry\n");
diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c
index 68e0a59..07aa7b3 100644
--- a/arch/arm/mach-omap2/mux34xx.c
+++ b/arch/arm/mach-omap2/mux34xx.c
@@ -649,6 +649,53 @@ static struct omap_mux __initdata omap3_muxmodes[] = {
_OMAP3_MUXENTRY(UART3_TX_IRTX, 166,
"uart3_tx_irtx", NULL, NULL, NULL,
"gpio_166", NULL, NULL, "safe_mode"),
+
+ /* Only on 3630, see omap36xx_cbp_subset for the signals */
+ _OMAP3_MUXENTRY(GPMC_A11, 0,
+ NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SAD2D_MBUSFLAG, 0,
+ NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SAD2D_MREAD, 0,
+ NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SAD2D_MWRITE, 0,
+ NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SAD2D_SBUSFLAG, 0,
+ NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SAD2D_SREAD, 0,
+ NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SAD2D_SWRITE, 0,
+ NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(GPMC_A11, 0,
+ NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SAD2D_MCAD28, 0,
+ NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SAD2D_MCAD29, 0,
+ NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SAD2D_MCAD32, 0,
+ NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SAD2D_MCAD33, 0,
+ NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SAD2D_MCAD34, 0,
+ NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SAD2D_MCAD35, 0,
+ NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SAD2D_MCAD36, 0,
+ NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL),
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 8c964be..e10a02d 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -36,7 +36,13 @@
#define UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV 0x52
#define UART_OMAP_WER 0x17 /* Wake-up enable register */
-#define DEFAULT_TIMEOUT (5 * HZ)
+/*
+ * NOTE: By default the serial timeout is disabled as it causes lost characters
+ * over the serial ports. This means that the UART clocks will stay on until
+ * disabled via sysfs. This also causes that any deeper omap sleep states are
+ * blocked.
+ */
+#define DEFAULT_TIMEOUT 0
struct omap_uart_state {
int num;
@@ -422,7 +428,8 @@ static void omap_uart_idle_init(struct omap_uart_state *uart)
uart->timeout = DEFAULT_TIMEOUT;
setup_timer(&uart->timer, omap_uart_idle_timer,
(unsigned long) uart);
- mod_timer(&uart->timer, jiffies + uart->timeout);
+ if (uart->timeout)
+ mod_timer(&uart->timer, jiffies + uart->timeout);
omap_uart_smart_idle_enable(uart, 0);
if (cpu_is_omap34xx()) {
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index a21a4b3..d94857e 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -334,8 +334,8 @@ static void realview_pbx_reset(char mode)
* in the system FPGA
*/
__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
- __raw_writel(0x0000, reset_ctrl);
- __raw_writel(0x0004, reset_ctrl);
+ __raw_writel(0x00F0, reset_ctrl);
+ __raw_writel(0x00F4, reset_ctrl);
}
static void __init realview_pbx_init(void)
diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S
index 3f9cd3d..795dc61 100644
--- a/arch/arm/mm/proc-arm6_7.S
+++ b/arch/arm/mm/proc-arm6_7.S
@@ -41,7 +41,7 @@ ENTRY(cpu_arm7_dcache_clean_area)
ENTRY(cpu_arm7_data_abort)
mrc p15, 0, r1, c5, c0, 0 @ get FSR
mrc p15, 0, r0, c6, c0, 0 @ get FAR
- ldr r8, [r0] @ read arm instruction
+ ldr r8, [r2] @ read arm instruction
tst r8, #1 << 20 @ L = 0 -> write?
orreq r1, r1, #1 << 11 @ yes.
and r7, r8, #15 << 24
diff --git a/arch/arm/plat-mxc/audmux-v2.c b/arch/arm/plat-mxc/audmux-v2.c
index 6f21096..b06954a 100644
--- a/arch/arm/plat-mxc/audmux-v2.c
+++ b/arch/arm/plat-mxc/audmux-v2.c
@@ -23,6 +23,7 @@
#include <linux/err.h>
#include <linux/io.h>
#include <linux/clk.h>
+#include <linux/debugfs.h>
#include <mach/audmux.h>
#include <mach/hardware.h>
@@ -32,6 +33,140 @@ static void __iomem *audmux_base;
#define MXC_AUDMUX_V2_PTCR(x) ((x) * 8)
#define MXC_AUDMUX_V2_PDCR(x) ((x) * 8 + 4)
+#ifdef CONFIG_DEBUG_FS
+static struct dentry *audmux_debugfs_root;
+
+static int audmux_open_file(struct inode *inode, struct file *file)
+{
+ file->private_data = inode->i_private;
+ return 0;
+}
+
+/* There is an annoying discontinuity in the SSI numbering with regard
+ * to the Linux number of the devices */
+static const char *audmux_port_string(int port)
+{
+ switch (port) {
+ case MX31_AUDMUX_PORT1_SSI0:
+ return "imx-ssi.0";
+ case MX31_AUDMUX_PORT2_SSI1:
+ return "imx-ssi.1";
+ case MX31_AUDMUX_PORT3_SSI_PINS_3:
+ return "SSI3";
+ case MX31_AUDMUX_PORT4_SSI_PINS_4:
+ return "SSI4";
+ case MX31_AUDMUX_PORT5_SSI_PINS_5:
+ return "SSI5";
+ case MX31_AUDMUX_PORT6_SSI_PINS_6:
+ return "SSI6";
+ default:
+ return "UNKNOWN";
+ }
+}
+
+static ssize_t audmux_read_file(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ ssize_t ret;
+ char *buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
+ int port = (int)file->private_data;
+ u32 pdcr, ptcr;
+
+ if (!buf)
+ return -ENOMEM;
+
+ if (audmux_clk)
+ clk_enable(audmux_clk);
+
+ ptcr = readl(audmux_base + MXC_AUDMUX_V2_PTCR(port));
+ pdcr = readl(audmux_base + MXC_AUDMUX_V2_PDCR(port));
+
+ if (audmux_clk)
+ clk_disable(audmux_clk);
+
+ ret = snprintf(buf, PAGE_SIZE, "PDCR: %08x\nPTCR: %08x\n",
+ pdcr, ptcr);
+
+ if (ptcr & MXC_AUDMUX_V2_PTCR_TFSDIR)
+ ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ "TxFS output from %s, ",
+ audmux_port_string((ptcr >> 27) & 0x7));
+ else
+ ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ "TxFS input, ");
+
+ if (ptcr & MXC_AUDMUX_V2_PTCR_TCLKDIR)
+ ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ "TxClk output from %s",
+ audmux_port_string((ptcr >> 22) & 0x7));
+ else
+ ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ "TxClk input");
+
+ ret += snprintf(buf + ret, PAGE_SIZE - ret, "\n");
+
+ if (ptcr & MXC_AUDMUX_V2_PTCR_SYN) {
+ ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ "Port is symmetric");
+ } else {
+ if (ptcr & MXC_AUDMUX_V2_PTCR_RFSDIR)
+ ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ "RxFS output from %s, ",
+ audmux_port_string((ptcr >> 17) & 0x7));
+ else
+ ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ "RxFS input, ");
+
+ if (ptcr & MXC_AUDMUX_V2_PTCR_RCLKDIR)
+ ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ "RxClk output from %s",
+ audmux_port_string((ptcr >> 12) & 0x7));
+ else
+ ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ "RxClk input");
+ }
+
+ ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ "\nData received from %s\n",
+ audmux_port_string((pdcr >> 13) & 0x7));
+
+ ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret);
+
+ kfree(buf);
+
+ return ret;
+}
+
+static const struct file_operations audmux_debugfs_fops = {
+ .open = audmux_open_file,
+ .read = audmux_read_file,
+};
+
+static void audmux_debugfs_init(void)
+{
+ int i;
+ char buf[20];
+
+ audmux_debugfs_root = debugfs_create_dir("audmux", NULL);
+ if (!audmux_debugfs_root) {
+ pr_warning("Failed to create AUDMUX debugfs root\n");
+ return;
+ }
+
+ for (i = 1; i < 8; i++) {
+ snprintf(buf, sizeof(buf), "ssi%d", i);
+ if (!debugfs_create_file(buf, 0444, audmux_debugfs_root,
+ (void *)i, &audmux_debugfs_fops))
+ pr_warning("Failed to create AUDMUX port %d debugfs file\n",
+ i);
+ }
+}
+#else
+static inline void audmux_debugfs_init(void)
+{
+}
+#endif
+
int mxc_audmux_v2_configure_port(unsigned int port, unsigned int ptcr,
unsigned int pdcr)
{
@@ -68,6 +203,8 @@ static int mxc_audmux_v2_init(void)
if (cpu_is_mx31() || cpu_is_mx35())
audmux_base = IO_ADDRESS(AUDMUX_BASE_ADDR);
+ audmux_debugfs_init();
+
return 0;
}
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lite.h b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
index 0184b63..2b2da03 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31lite.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
@@ -25,7 +25,7 @@
#ifndef __ASSEMBLY__
-enum mx31lilly_boards {
+enum mx31lite_boards {
MX31LITE_NOBOARD = 0,
MX31LITE_DB = 1,
};
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 286cb9b..4bf1068 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -32,7 +32,7 @@ extern void mxc91231_init_irq(void);
extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
extern int mx1_clocks_init(unsigned long fref);
extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
-extern int mx25_clocks_init(unsigned long fref);
+extern int mx25_clocks_init(void);
extern int mx27_clocks_init(unsigned long fref);
extern int mx31_clocks_init(unsigned long fref);
extern int mx35_clocks_init(void);
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx35.h b/arch/arm/plat-mxc/include/mach/iomux-mx35.h
index 00b0ac1..c88d407 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx35.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx35.h
@@ -671,7 +671,7 @@
#define MX35_PAD_LD8__SDMA_SDMA_DEBUG_PC_8 IOMUX_PAD(0x634, 0x1d0, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD9__IPU_DISPB_DAT_9 IOMUX_PAD(0x638, 0x1d4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD9__GPIO2_9 IOMUX_PAD(0x638, 0x1d4, 5, 0x8e4 0, NO_PAD_CTRL)
+#define MX35_PAD_LD9__GPIO2_9 IOMUX_PAD(0x638, 0x1d4, 5, 0x8e4, 0, NO_PAD_CTRL)
#define MX35_PAD_LD9__SDMA_SDMA_DEBUG_PC_9 IOMUX_PAD(0x638, 0x1d4, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD10__IPU_DISPB_DAT_10 IOMUX_PAD(0x63c, 0x1d8, 0, 0x0, 0, NO_PAD_CTRL)
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index ead9d59..0cb3476 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -37,7 +37,12 @@
* within sensible limits.
*/
#define MXC_BOARD_IRQ_START (MXC_INTERNAL_IRQS + MXC_GPIO_IRQS)
+
+#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
+#define MXC_BOARD_IRQS 80
+#else
#define MXC_BOARD_IRQS 16
+#endif
#define MXC_IPU_IRQ_START (MXC_BOARD_IRQ_START + MXC_BOARD_IRQS)
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index d9f8c84..4becbdd 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -391,7 +391,7 @@ static struct dentry *clk_debugfs_root;
static int clk_debugfs_register_one(struct clk *c)
{
int err;
- struct dentry *d, *child;
+ struct dentry *d, *child, *child_tmp;
struct clk *pa = c->parent;
char s[255];
char *p = s;
@@ -423,7 +423,7 @@ static int clk_debugfs_register_one(struct clk *c)
err_out:
d = c->dent;
- list_for_each_entry(child, &d->d_subdirs, d_u.d_child)
+ list_for_each_entry_safe(child, child_tmp, &d->d_subdirs, d_u.d_child)
debugfs_remove(child);
debugfs_remove(c->dent);
return err;
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index d17620c..d2422c7 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -750,6 +750,7 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
}
#endif
+#ifdef CONFIG_ARCH_OMAP1
/*
* This only applies to chips that can't do both rising and falling edge
* detection at once. For all other chips, this function is a noop.
@@ -760,11 +761,9 @@ static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio)
u32 l = 0;
switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
case METHOD_MPUIO:
reg += OMAP_MPUIO_GPIO_INT_EDGE;
break;
-#endif
#ifdef CONFIG_ARCH_OMAP15XX
case METHOD_GPIO_1510:
reg += OMAP1510_GPIO_INT_CONTROL;
@@ -787,6 +786,7 @@ static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio)
__raw_writel(l, reg);
}
+#endif
static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
{
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index 1e5648d..2ed7201 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -89,16 +89,6 @@
#define USE_WAKEUP_LAT 0
#define IGNORE_WAKEUP_LAT 1
-/* XXX this should be moved into a separate file */
-#if defined(CONFIG_ARCH_OMAP2420)
-# define OMAP_32KSYNCT_BASE 0x48004000
-#elif defined(CONFIG_ARCH_OMAP2430)
-# define OMAP_32KSYNCT_BASE 0x49020000
-#elif defined(CONFIG_ARCH_OMAP3430)
-# define OMAP_32KSYNCT_BASE 0x48320000
-#else
-# error Unknown OMAP device
-#endif
/* Private functions */
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index f60a540..a63c4be 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -197,10 +197,13 @@ static void vfp_raise_exceptions(u32 exceptions, u32 inst, u32 fpscr, struct pt_
}
/*
- * Update the FPSCR with the additional exception flags.
+ * If any of the status flags are set, update the FPSCR.
* Comparison instructions always return at least one of
* these flags set.
*/
+ if (exceptions & (FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V))
+ fpscr &= ~(FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V);
+
fpscr |= exceptions;
fmxr(FPSCR, fpscr);
generated by cgit v0.10.2 at 2024-10-20 22:26:36 (GMT)