diff options
Diffstat (limited to 'arch/blackfin/mach-bf548/include')
-rw-r--r-- | arch/blackfin/mach-bf548/include/mach/anomaly.h | 21 | ||||
-rw-r--r-- | arch/blackfin/mach-bf548/include/mach/blackfin.h | 89 |
2 files changed, 19 insertions, 91 deletions
diff --git a/arch/blackfin/mach-bf548/include/mach/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h index cd040fe..52b116a 100644 --- a/arch/blackfin/mach-bf548/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h @@ -7,7 +7,7 @@ */ /* This file should be up to date with: - * - Revision H, 01/16/2009; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List + * - Revision I, 07/23/2009; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -162,6 +162,8 @@ #define ANOMALY_05000430 (__SILICON_REVISION__ >= 2) /* Incorrect Use of Stack in Lockbox Firmware During Authentication */ #define ANOMALY_05000431 (__SILICON_REVISION__ < 3) +/* SW Breakpoints Ignored Upon Return From Lockbox Authentication */ +#define ANOMALY_05000434 (1) /* OTP Write Accesses Not Supported */ #define ANOMALY_05000442 (__SILICON_REVISION__ < 1) /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */ @@ -176,12 +178,26 @@ #define ANOMALY_05000449 (__SILICON_REVISION__ == 1) /* USB DMA Mode 1 Short Packet Data Corruption */ #define ANOMALY_05000450 (1) +/* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */ +#define ANOMALY_05000452 (__SILICON_REVISION__ < 1) /* USB Receive Interrupt Is Not Generated in DMA Mode 1 */ -#define ANOMALY_05000456 (__SILICON_REVISION__ < 3) +#define ANOMALY_05000456 (1) +/* Host DMA Port Responds to Certain Bus Activity Without HOST_CE Assertion */ +#define ANOMALY_05000457 (1) +/* USB DMA Mode 1 Failure When Multiple USB DMA Channels Are Concurrently Enabled */ +#define ANOMALY_05000460 (1) /* False Hardware Error when RETI Points to Invalid Memory */ #define ANOMALY_05000461 (1) +/* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */ +#define ANOMALY_05000462 (1) +/* USB DMA RX Data Corruption */ +#define ANOMALY_05000463 (1) +/* USB TX DMA Hang */ +#define ANOMALY_05000464 (1) /* USB Rx DMA hang */ #define ANOMALY_05000465 (1) +/* TxPktRdy Bit Not Set for Transmit Endpoint When Core and DMA Access USB Endpoint FIFOs Simultaneously */ +#define ANOMALY_05000466 (1) /* Possible RX data corruption when control & data EP FIFOs are accessed via the core */ #define ANOMALY_05000467 (1) @@ -230,6 +246,7 @@ #define ANOMALY_05000364 (0) #define ANOMALY_05000380 (0) #define ANOMALY_05000400 (0) +#define ANOMALY_05000402 (0) #define ANOMALY_05000412 (0) #define ANOMALY_05000432 (0) #define ANOMALY_05000435 (0) diff --git a/arch/blackfin/mach-bf548/include/mach/blackfin.h b/arch/blackfin/mach-bf548/include/mach/blackfin.h index 6b97396..318667b 100644 --- a/arch/blackfin/mach-bf548/include/mach/blackfin.h +++ b/arch/blackfin/mach-bf548/include/mach/blackfin.h @@ -72,97 +72,8 @@ #include "cdefBF549.h" #endif -/* UART 1*/ -#define bfin_read_UART_THR() bfin_read_UART1_THR() -#define bfin_write_UART_THR(val) bfin_write_UART1_THR(val) -#define bfin_read_UART_RBR() bfin_read_UART1_RBR() -#define bfin_write_UART_RBR(val) bfin_write_UART1_RBR(val) -#define bfin_read_UART_DLL() bfin_read_UART1_DLL() -#define bfin_write_UART_DLL(val) bfin_write_UART1_DLL(val) -#define bfin_read_UART_IER() bfin_read_UART1_IER() -#define bfin_write_UART_IER(val) bfin_write_UART1_IER(val) -#define bfin_read_UART_DLH() bfin_read_UART1_DLH() -#define bfin_write_UART_DLH(val) bfin_write_UART1_DLH(val) -#define bfin_read_UART_IIR() bfin_read_UART1_IIR() -#define bfin_write_UART_IIR(val) bfin_write_UART1_IIR(val) -#define bfin_read_UART_LCR() bfin_read_UART1_LCR() -#define bfin_write_UART_LCR(val) bfin_write_UART1_LCR(val) -#define bfin_read_UART_MCR() bfin_read_UART1_MCR() -#define bfin_write_UART_MCR(val) bfin_write_UART1_MCR(val) -#define bfin_read_UART_LSR() bfin_read_UART1_LSR() -#define bfin_write_UART_LSR(val) bfin_write_UART1_LSR(val) -#define bfin_read_UART_SCR() bfin_read_UART1_SCR() -#define bfin_write_UART_SCR(val) bfin_write_UART1_SCR(val) -#define bfin_read_UART_GCTL() bfin_read_UART1_GCTL() -#define bfin_write_UART_GCTL(val) bfin_write_UART1_GCTL(val) - #endif -/* MAP used DEFINES from BF533 to BF54x - so we don't need to change - * them in the driver, kernel, etc. */ - -/* UART_IIR Register */ -#define STATUS(x) ((x << 1) & 0x06) -#define STATUS_P1 0x02 -#define STATUS_P0 0x01 - -/* UART 0*/ - -/* DMA Channel */ -#define bfin_read_CH_UART_RX() bfin_read_CH_UART1_RX() -#define bfin_write_CH_UART_RX(val) bfin_write_CH_UART1_RX(val) -#define bfin_read_CH_UART_TX() bfin_read_CH_UART1_TX() -#define bfin_write_CH_UART_TX(val) bfin_write_CH_UART1_TX(val) -#define CH_UART_RX CH_UART1_RX -#define CH_UART_TX CH_UART1_TX - -/* System Interrupt Controller */ -#define bfin_read_IRQ_UART_RX() bfin_read_IRQ_UART1_RX() -#define bfin_write_IRQ_UART_RX(val) bfin_write_IRQ_UART1_RX(val) -#define bfin_read_IRQ_UART_TX() bfin_read_IRQ_UART1_TX() -#define bfin_write_IRQ_UART_TX(val) bfin_write_IRQ_UART1_TX(val) -#define bfin_read_IRQ_UART_ERROR() bfin_read_IRQ_UART1_ERROR() -#define bfin_write_IRQ_UART_ERROR(val) bfin_write_IRQ_UART1_ERROR(val) -#define IRQ_UART_RX IRQ_UART1_RX -#define IRQ_UART_TX IRQ_UART1_TX -#define IRQ_UART_ERROR IRQ_UART1_ERROR - -/* MMR Registers*/ -#define bfin_read_UART_THR() bfin_read_UART1_THR() -#define bfin_write_UART_THR(val) bfin_write_UART1_THR(val) -#define bfin_read_UART_RBR() bfin_read_UART1_RBR() -#define bfin_write_UART_RBR(val) bfin_write_UART1_RBR(val) -#define bfin_read_UART_DLL() bfin_read_UART1_DLL() -#define bfin_write_UART_DLL(val) bfin_write_UART1_DLL(val) -#define bfin_read_UART_IER() bfin_read_UART1_IER() -#define bfin_write_UART_IER(val) bfin_write_UART1_IER(val) -#define bfin_read_UART_DLH() bfin_read_UART1_DLH() -#define bfin_write_UART_DLH(val) bfin_write_UART1_DLH(val) -#define bfin_read_UART_IIR() bfin_read_UART1_IIR() -#define bfin_write_UART_IIR(val) bfin_write_UART1_IIR(val) -#define bfin_read_UART_LCR() bfin_read_UART1_LCR() -#define bfin_write_UART_LCR(val) bfin_write_UART1_LCR(val) -#define bfin_read_UART_MCR() bfin_read_UART1_MCR() -#define bfin_write_UART_MCR(val) bfin_write_UART1_MCR(val) -#define bfin_read_UART_LSR() bfin_read_UART1_LSR() -#define bfin_write_UART_LSR(val) bfin_write_UART1_LSR(val) -#define bfin_read_UART_SCR() bfin_read_UART1_SCR() -#define bfin_write_UART_SCR(val) bfin_write_UART1_SCR(val) -#define bfin_read_UART_GCTL() bfin_read_UART1_GCTL() -#define bfin_write_UART_GCTL(val) bfin_write_UART1_GCTL(val) - -#define BFIN_UART_THR UART1_THR -#define BFIN_UART_RBR UART1_RBR -#define BFIN_UART_DLL UART1_DLL -#define BFIN_UART_IER UART1_IER -#define BFIN_UART_DLH UART1_DLH -#define BFIN_UART_IIR UART1_IIR -#define BFIN_UART_LCR UART1_LCR -#define BFIN_UART_MCR UART1_MCR -#define BFIN_UART_LSR UART1_LSR -#define BFIN_UART_SCR UART1_SCR -#define BFIN_UART_GCTL UART1_GCTL - #define BFIN_UART_NR_PORTS 4 #define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */ |