diff options
Diffstat (limited to 'arch/m32r/platforms/m32700ut')
-rw-r--r-- | arch/m32r/platforms/m32700ut/Makefile | 1 | ||||
-rw-r--r-- | arch/m32r/platforms/m32700ut/dot.gdbinit_200MHz_16MB | 249 | ||||
-rw-r--r-- | arch/m32r/platforms/m32700ut/dot.gdbinit_300MHz_32MB | 249 | ||||
-rw-r--r-- | arch/m32r/platforms/m32700ut/dot.gdbinit_400MHz_32MB | 249 | ||||
-rw-r--r-- | arch/m32r/platforms/m32700ut/io.c | 395 | ||||
-rw-r--r-- | arch/m32r/platforms/m32700ut/setup.c | 518 |
6 files changed, 1661 insertions, 0 deletions
diff --git a/arch/m32r/platforms/m32700ut/Makefile b/arch/m32r/platforms/m32700ut/Makefile new file mode 100644 index 0000000..0de5908 --- /dev/null +++ b/arch/m32r/platforms/m32700ut/Makefile @@ -0,0 +1 @@ +obj-y := setup.o io.o diff --git a/arch/m32r/platforms/m32700ut/dot.gdbinit_200MHz_16MB b/arch/m32r/platforms/m32700ut/dot.gdbinit_200MHz_16MB new file mode 100644 index 0000000..525dab4 --- /dev/null +++ b/arch/m32r/platforms/m32700ut/dot.gdbinit_200MHz_16MB @@ -0,0 +1,249 @@ +# .gdbinit file +# $Id: dot.gdbinit_200MHz_16MB,v 1.2 2004/10/20 03:02:27 fujiwara Exp $ +#----- +# NOTE: this file is generated by a script, "gen_gdbinit.pl". +# (Please type "gen_gdbinit.pl --help" and check the help message). +# $ Id: gen_gdbinit.pl,v 1.12 2004/07/26 09:56:10 takata Exp $ +#----- +# target platform: m32700ut + +# setting +set width 0d70 +set radix 0d16 + +debug_chaos + +# clk xin:cpu:bif:bus=25:200:50:50 +define clock_init + set *(unsigned long *)0x00ef4008 = 0x00000000 + set *(unsigned long *)0x00ef4004 = 0 + shell sleep 0.1 + # NOTE: Please change the master clock source from PLL-clock to Xin-clock + # and switch off PLL, before resetting the clock gear ratio. + + set *(unsigned long *)0x00ef4024 = 2 + set *(unsigned long *)0x00ef4020 = 2 + set *(unsigned long *)0x00ef4010 = 0 + set *(unsigned long *)0x00ef4014 = 0 + set *(unsigned long *)0x00ef4004 = 3 + shell sleep 0.1 + set *(unsigned long *)0x00ef4008 = 0x00000200 +end + +# Initialize SDRAM controller +define sdram_init + # SDIR0 + set *(unsigned long *)0x00ef6008 = 0x00000182 + # SDIR1 + set *(unsigned long *)0x00ef600c = 0x00000001 + # Initialize wait + shell sleep 0.1 + # Ch0-MOD + set *(unsigned long *)0x00ef602c = 0x00000020 + # Ch0-TR + set *(unsigned long *)0x00ef6028 = 0x00041302 + # Ch0-ADR (size:16MB) + set *(unsigned long *)0x00ef6020 = 0x08000002 + # AutoRef On + set *(unsigned long *)0x00ef6004 = 0x00010517 + # Access enable + set *(unsigned long *)0x00ef6024 = 0x00000001 +end +document sdram_init + SDRAM controller initialization + 0x08000000 - 0x08ffffff (16MB) +end + +# Initialize BSEL3 for UT-CFC +define cfc_init + set $sfrbase = 0xa0ef0000 +# too fast +# set *(unsigned long *)($sfrbase + 0x5300) = 0x0b0b8000 +# set *(unsigned long *)($sfrbase + 0x5304) = 0x00102204 +# set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f8000 +# set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f1fdf +# set *(unsigned long *)($sfrbase + 0x5304) = 0x0013220f +# set *(unsigned long *)($sfrbase + 0x5304) = 0x0013330f +end +document cfc_init + CF controller initialization +end + +# MMU enable +define mmu_enable + set $evb=0x88000000 + set *(unsigned long *)0xffff0024=1 +end + +# MMU disable +define mmu_disable + set $evb=0 + set *(unsigned long *)0xffff0024=0 +end + +# Show TLB entries +define show_tlb_entries + set $i = 0 + set $addr = $arg0 + set $nr_entries = $arg1 + use_mon_code + while ($i < $nr_entries) + set $tlb_tag = *(unsigned long*)$addr + set $tlb_data = *(unsigned long*)($addr + 4) + printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data + set $i = $i + 1 + set $addr = $addr + 8 + end + use_debug_dma +end +define itlb + set $itlb=0xfe000000 + show_tlb_entries $itlb 0d32 +end +define dtlb + set $dtlb=0xfe000800 + show_tlb_entries $dtlb 0d32 +end + +# Initialize TLB entries +define init_tlb_entries + set $i = 0 + set $addr = $arg0 + set $nr_entries = $arg1 + use_mon_code + while ($i < $nr_entries) + set *(unsigned long *)($addr + 0x4) = 0 + set $i = $i + 1 + set $addr = $addr + 8 + end + use_debug_dma +end +define tlb_init + set $itlb=0xfe000000 + init_tlb_entries $itlb 0d32 + set $dtlb=0xfe000800 + init_tlb_entries $dtlb 0d32 +end + +# Show current task structure +define show_current + set $current = $spi & 0xffffe000 + printf "$current=0x%08lX\n",$current + print *(struct task_struct *)$current +end + +# Show user assigned task structure +define show_task + set = $arg0 & 0xffffe000 + printf "$task=0x%08lX\n",$task + print *(struct task_struct *)$task +end +document show_task + Show user assigned task structure + arg0 : task structure address +end + +# Show M32R registers +define show_regs + printf " R0[0x%08lX] R1[0x%08lX] R2[0x%08lX] R3[0x%08lX]\n",$r0,$r1,$r2,$r3 + printf " R4[0x%08lX] R5[0x%08lX] R6[0x%08lX] R7[0x%08lX]\n",$r4,$r5,$r6,$r7 + printf " R8[0x%08lX] R9[0x%08lX] R10[0x%08lX] R11[0x%08lX]\n",$r8,$r9,$r10,$r11 + printf "R12[0x%08lX] FP[0x%08lX] LR[0x%08lX] SP[0x%08lX]\n",$r12,$fp,$lr,$sp + printf "PSW[0x%08lX] CBR[0x%08lX] SPI[0x%08lX] SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu + printf "BPC[0x%08lX] PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch + printf "EVB[0x%08lX]\n",$evb +end + +# Setup all +define setup + use_mon_code + set *(unsigned int)0xfffffffc=0x60 + shell sleep 0.1 + clock_init + shell sleep 0.1 + # SDRAM: 16MB + set *(unsigned long *)0x00ef6020 = 0x08000002 + cfc_init + # USB + set *(unsigned short *)0xb0301000 = 0x100 + + set $evb=0x08000000 +end + +# Load modules +define load_modules + use_debug_dma + load +end + +# Set kernel parameters +define set_kernel_parameters + set $param = (void*)0x08001000 + # INITRD_START +# set *(unsigned long *)($param + 0x0010) = 0x08300000 + # INITRD_SIZE +# set *(unsigned long *)($param + 0x0014) = 0x00000000 + # M32R_CPUCLK + set *(unsigned long *)($param + 0x0018) = 0d200000000 + # M32R_BUSCLK + set *(unsigned long *)($param + 0x001c) = 0d50000000 + + # M32R_TIMER_DIVIDE + set *(unsigned long *)($param + 0x0020) = 0d128 + + set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x console=tty1 root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/rootfs,rsize=1024,wsize=1024 nfsaddrs=192.168.0.101:192.168.0.1:192.168.0.1:255.255.255.0:mappi001 mem=16M \0" +end + +# Boot +define boot + set_kernel_parameters + set $fp = 0 + set $pc = 0x08002000 +# set *(unsigned char *)0xffffffff = 0x03 + si + c +end + +# Set breakpoints +define set_breakpoints + b *0x08000030 +end + +# Restart +define restart + sdireset + sdireset + set $pc = 0 + b *0x04001000 + b *0x08001000 + b *0x08002000 + si + c + tlb_init + del + setup + load_modules + boot +end + +define si + stepi + x/i $pc + show_reg +end + +sdireset +sdireset +file vmlinux +target m32rsdi +set $pc = 0 +b *0x04001000 +b *0x08001000 +b *0x08002000 +c +tlb_init +del +setup +load_modules +boot + diff --git a/arch/m32r/platforms/m32700ut/dot.gdbinit_300MHz_32MB b/arch/m32r/platforms/m32700ut/dot.gdbinit_300MHz_32MB new file mode 100644 index 0000000..aa50365 --- /dev/null +++ b/arch/m32r/platforms/m32700ut/dot.gdbinit_300MHz_32MB @@ -0,0 +1,249 @@ +# .gdbinit file +# $Id: dot.gdbinit_300MHz_32MB,v 1.2 2004/10/20 03:02:27 fujiwara Exp $ +#----- +# NOTE: this file is generated by a script, "gen_gdbinit.pl". +# (Please type "gen_gdbinit.pl --help" and check the help message). +# $ Id: gen_gdbinit.pl,v 1.12 2004/07/26 09:56:10 takata Exp $ +#----- +# target platform: m32700ut + +# setting +set width 0d70 +set radix 0d16 + +debug_chaos + +# clk xin:cpu:bif:bus=25:300:75:75 +define clock_init + set *(unsigned long *)0x00ef4008 = 0x00000000 + set *(unsigned long *)0x00ef4004 = 0 + shell sleep 0.1 + # NOTE: Please change the master clock source from PLL-clock to Xin-clock + # and switch off PLL, before resetting the clock gear ratio. + + set *(unsigned long *)0x00ef4024 = 2 + set *(unsigned long *)0x00ef4020 = 2 + set *(unsigned long *)0x00ef4010 = 0 + set *(unsigned long *)0x00ef4014 = 0 + set *(unsigned long *)0x00ef4004 = 5 + shell sleep 0.1 + set *(unsigned long *)0x00ef4008 = 0x00000200 +end + +# Initialize SDRAM controller +define sdram_init + # SDIR0 + set *(unsigned long *)0x00ef6008 = 0x00000182 + # SDIR1 + set *(unsigned long *)0x00ef600c = 0x00000001 + # Initialize wait + shell sleep 0.1 + # Ch0-MOD + set *(unsigned long *)0x00ef602c = 0x00000020 + # Ch0-TR + set *(unsigned long *)0x00ef6028 = 0x00051502 + # Ch0-ADR (size:32MB) + set *(unsigned long *)0x00ef6020 = 0x08000003 + # AutoRef On + set *(unsigned long *)0x00ef6004 = 0x00010e24 + # Access enable + set *(unsigned long *)0x00ef6024 = 0x00000001 +end +document sdram_init + SDRAM controller initialization + 0x08000000 - 0x09ffffff (32MB) +end + +# Initialize BSEL3 for UT-CFC +define cfc_init + set $sfrbase = 0xa0ef0000 +# too fast +# set *(unsigned long *)($sfrbase + 0x5300) = 0x0b0b8000 +# set *(unsigned long *)($sfrbase + 0x5304) = 0x00102204 +# set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f8000 +# set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f1fdf +# set *(unsigned long *)($sfrbase + 0x5304) = 0x0013220f +# set *(unsigned long *)($sfrbase + 0x5304) = 0x0013330f +end +document cfc_init + CF controller initialization +end + +# MMU enable +define mmu_enable + set $evb=0x88000000 + set *(unsigned long *)0xffff0024=1 +end + +# MMU disable +define mmu_disable + set $evb=0 + set *(unsigned long *)0xffff0024=0 +end + +# Show TLB entries +define show_tlb_entries + set $i = 0 + set $addr = $arg0 + set $nr_entries = $arg1 + use_mon_code + while ($i < $nr_entries) + set $tlb_tag = *(unsigned long*)$addr + set $tlb_data = *(unsigned long*)($addr + 4) + printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data + set $i = $i + 1 + set $addr = $addr + 8 + end + use_debug_dma +end +define itlb + set $itlb=0xfe000000 + show_tlb_entries $itlb 0d32 +end +define dtlb + set $dtlb=0xfe000800 + show_tlb_entries $dtlb 0d32 +end + +# Initialize TLB entries +define init_tlb_entries + set $i = 0 + set $addr = $arg0 + set $nr_entries = $arg1 + use_mon_code + while ($i < $nr_entries) + set *(unsigned long *)($addr + 0x4) = 0 + set $i = $i + 1 + set $addr = $addr + 8 + end + use_debug_dma +end +define tlb_init + set $itlb=0xfe000000 + init_tlb_entries $itlb 0d32 + set $dtlb=0xfe000800 + init_tlb_entries $dtlb 0d32 +end + +# Show current task structure +define show_current + set $current = $spi & 0xffffe000 + printf "$current=0x%08lX\n",$current + print *(struct task_struct *)$current +end + +# Show user assigned task structure +define show_task + set = $arg0 & 0xffffe000 + printf "$task=0x%08lX\n",$task + print *(struct task_struct *)$task +end +document show_task + Show user assigned task structure + arg0 : task structure address +end + +# Show M32R registers +define show_regs + printf " R0[0x%08lX] R1[0x%08lX] R2[0x%08lX] R3[0x%08lX]\n",$r0,$r1,$r2,$r3 + printf " R4[0x%08lX] R5[0x%08lX] R6[0x%08lX] R7[0x%08lX]\n",$r4,$r5,$r6,$r7 + printf " R8[0x%08lX] R9[0x%08lX] R10[0x%08lX] R11[0x%08lX]\n",$r8,$r9,$r10,$r11 + printf "R12[0x%08lX] FP[0x%08lX] LR[0x%08lX] SP[0x%08lX]\n",$r12,$fp,$lr,$sp + printf "PSW[0x%08lX] CBR[0x%08lX] SPI[0x%08lX] SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu + printf "BPC[0x%08lX] PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch + printf "EVB[0x%08lX]\n",$evb +end + +# Setup all +define setup + use_mon_code + set *(unsigned int)0xfffffffc=0x60 + shell sleep 0.1 + clock_init + shell sleep 0.1 + # SDRAM: 32MB + set *(unsigned long *)0x00ef6020 = 0x08000003 + cfc_init + # USB + set *(unsigned short *)0xb0301000 = 0x100 + + set $evb=0x08000000 +end + +# Load modules +define load_modules + use_debug_dma + load +end + +# Set kernel parameters +define set_kernel_parameters + set $param = (void*)0x08001000 + # INITRD_START +# set *(unsigned long *)($param + 0x0010) = 0x08300000 + # INITRD_SIZE +# set *(unsigned long *)($param + 0x0014) = 0x00000000 + # M32R_CPUCLK + set *(unsigned long *)($param + 0x0018) = 0d300000000 + # M32R_BUSCLK + set *(unsigned long *)($param + 0x001c) = 0d75000000 + + # M32R_TIMER_DIVIDE + set *(unsigned long *)($param + 0x0020) = 0d128 + + set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x console=tty1 root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/rootfs,rsize=1024,wsize=1024 nfsaddrs=192.168.0.101:192.168.0.1:192.168.0.1:255.255.255.0:mappi001 mem=32M \0" +end + +# Boot +define boot + set_kernel_parameters + set $fp = 0 + set $pc = 0x08002000 +# set *(unsigned char *)0xffffffff = 0x03 + si + c +end + +# Set breakpoints +define set_breakpoints + b *0x08000030 +end + +# Restart +define restart + sdireset + sdireset + set $pc = 0 + b *0x04001000 + b *0x08001000 + b *0x08002000 + si + c + tlb_init + del + setup + load_modules + boot +end + +define si + stepi + x/i $pc + show_reg +end + +sdireset +sdireset +file vmlinux +target m32rsdi +set $pc = 0 +b *0x04001000 +b *0x08001000 +b *0x08002000 +c +tlb_init +del +setup +load_modules +boot + diff --git a/arch/m32r/platforms/m32700ut/dot.gdbinit_400MHz_32MB b/arch/m32r/platforms/m32700ut/dot.gdbinit_400MHz_32MB new file mode 100644 index 0000000..adc608a --- /dev/null +++ b/arch/m32r/platforms/m32700ut/dot.gdbinit_400MHz_32MB @@ -0,0 +1,249 @@ +# .gdbinit file +# $Id: dot.gdbinit_400MHz_32MB,v 1.1 2004/10/21 01:41:27 fujiwara Exp $ +#----- +# NOTE: this file is generated by a script, "gen_gdbinit.pl". +# (Please type "gen_gdbinit.pl --help" and check the help message). +# $ Id: gen_gdbinit.pl,v 1.12 2004/07/26 09:56:10 takata Exp $ +#----- +# target platform: m32700ut + +# setting +set width 0d70 +set radix 0d16 + +debug_chaos + +# clk xin:cpu:bif:bus=25:400:100:50 +define clock_init + set *(unsigned long *)0x00ef4008 = 0x00000000 + set *(unsigned long *)0x00ef4004 = 0 + shell sleep 0.1 + # NOTE: Please change the master clock source from PLL-clock to Xin-clock + # and switch off PLL, before resetting the clock gear ratio. + + set *(unsigned long *)0x00ef4024 = 3 + set *(unsigned long *)0x00ef4020 = 2 + set *(unsigned long *)0x00ef4010 = 0 + set *(unsigned long *)0x00ef4014 = 0 + set *(unsigned long *)0x00ef4004 = 7 + shell sleep 0.1 + set *(unsigned long *)0x00ef4008 = 0x00000200 +end + +# Initialize SDRAM controller +define sdram_init + # SDIR0 + set *(unsigned long *)0x00ef6008 = 0x00000182 + # SDIR1 + set *(unsigned long *)0x00ef600c = 0x00000001 + # Initialize wait + shell sleep 0.1 + # Ch0-MOD + set *(unsigned long *)0x00ef602c = 0x00000020 + # Ch0-TR + set *(unsigned long *)0x00ef6028 = 0x00041302 + # Ch0-ADR (size:32MB) + set *(unsigned long *)0x00ef6020 = 0x08000003 + # AutoRef On + set *(unsigned long *)0x00ef6004 = 0x00010517 + # Access enable + set *(unsigned long *)0x00ef6024 = 0x00000001 +end +document sdram_init + SDRAM controller initialization + 0x08000000 - 0x09ffffff (32MB) +end + +# Initialize BSEL3 for UT-CFC +define cfc_init + set $sfrbase = 0xa0ef0000 +# too fast +# set *(unsigned long *)($sfrbase + 0x5300) = 0x0b0b8000 +# set *(unsigned long *)($sfrbase + 0x5304) = 0x00102204 +# set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f8000 +# set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f1fdf +# set *(unsigned long *)($sfrbase + 0x5304) = 0x0013220f +# set *(unsigned long *)($sfrbase + 0x5304) = 0x0013330f +end +document cfc_init + CF controller initialization +end + +# MMU enable +define mmu_enable + set $evb=0x88000000 + set *(unsigned long *)0xffff0024=1 +end + +# MMU disable +define mmu_disable + set $evb=0 + set *(unsigned long *)0xffff0024=0 +end + +# Show TLB entries +define show_tlb_entries + set $i = 0 + set $addr = $arg0 + set $nr_entries = $arg1 + use_mon_code + while ($i < $nr_entries) + set $tlb_tag = *(unsigned long*)$addr + set $tlb_data = *(unsigned long*)($addr + 4) + printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data + set $i = $i + 1 + set $addr = $addr + 8 + end + use_debug_dma +end +define itlb + set $itlb=0xfe000000 + show_tlb_entries $itlb 0d32 +end +define dtlb + set $dtlb=0xfe000800 + show_tlb_entries $dtlb 0d32 +end + +# Initialize TLB entries +define init_tlb_entries + set $i = 0 + set $addr = $arg0 + set $nr_entries = $arg1 + use_mon_code + while ($i < $nr_entries) + set *(unsigned long *)($addr + 0x4) = 0 + set $i = $i + 1 + set $addr = $addr + 8 + end + use_debug_dma +end +define tlb_init + set $itlb=0xfe000000 + init_tlb_entries $itlb 0d32 + set $dtlb=0xfe000800 + init_tlb_entries $dtlb 0d32 +end + +# Show current task structure +define show_current + set $current = $spi & 0xffffe000 + printf "$current=0x%08lX\n",$current + print *(struct task_struct *)$current +end + +# Show user assigned task structure +define show_task + set = $arg0 & 0xffffe000 + printf "$task=0x%08lX\n",$task + print *(struct task_struct *)$task +end +document show_task + Show user assigned task structure + arg0 : task structure address +end + +# Show M32R registers +define show_regs + printf " R0[0x%08lX] R1[0x%08lX] R2[0x%08lX] R3[0x%08lX]\n",$r0,$r1,$r2,$r3 + printf " R4[0x%08lX] R5[0x%08lX] R6[0x%08lX] R7[0x%08lX]\n",$r4,$r5,$r6,$r7 + printf " R8[0x%08lX] R9[0x%08lX] R10[0x%08lX] R11[0x%08lX]\n",$r8,$r9,$r10,$r11 + printf "R12[0x%08lX] FP[0x%08lX] LR[0x%08lX] SP[0x%08lX]\n",$r12,$fp,$lr,$sp + printf "PSW[0x%08lX] CBR[0x%08lX] SPI[0x%08lX] SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu + printf "BPC[0x%08lX] PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch + printf "EVB[0x%08lX]\n",$evb +end + +# Setup all +define setup + use_mon_code + set *(unsigned int)0xfffffffc=0x60 + shell sleep 0.1 + clock_init + shell sleep 0.1 + # SDRAM: 32MB + set *(unsigned long *)0x00ef6020 = 0x08000003 + cfc_init + # USB + set *(unsigned short *)0xb0301000 = 0x100 + + set $evb=0x08000000 +end + +# Load modules +define load_modules + use_debug_dma + load +end + +# Set kernel parameters +define set_kernel_parameters + set $param = (void*)0x08001000 + # INITRD_START +# set *(unsigned long *)($param + 0x0010) = 0x08300000 + # INITRD_SIZE +# set *(unsigned long *)($param + 0x0014) = 0x00000000 + # M32R_CPUCLK + set *(unsigned long *)($param + 0x0018) = 0d400000000 + # M32R_BUSCLK + set *(unsigned long *)($param + 0x001c) = 0d50000000 + + # M32R_TIMER_DIVIDE + set *(unsigned long *)($param + 0x0020) = 0d128 + + set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x console=tty1 root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/rootfs,rsize=1024,wsize=1024 nfsaddrs=192.168.0.101:192.168.0.1:192.168.0.1:255.255.255.0:mappi001 mem=32M \0" +end + +# Boot +define boot + set_kernel_parameters + set $fp = 0 + set $pc = 0x08002000 +# set *(unsigned char *)0xffffffff = 0x03 + si + c +end + +# Set breakpoints +define set_breakpoints + b *0x08000030 +end + +# Restart +define restart + sdireset + sdireset + set $pc = 0 + b *0x04001000 + b *0x08001000 + b *0x08002000 + si + c + tlb_init + del + setup + load_modules + boot +end + +define si + stepi + x/i $pc + show_reg +end + +sdireset +sdireset +file vmlinux +target m32rsdi +set $pc = 0 +b *0x04001000 +b *0x08001000 +b *0x08002000 +c +tlb_init +del +setup +load_modules +boot + diff --git a/arch/m32r/platforms/m32700ut/io.c b/arch/m32r/platforms/m32700ut/io.c new file mode 100644 index 0000000..6862586 --- /dev/null +++ b/arch/m32r/platforms/m32700ut/io.c @@ -0,0 +1,395 @@ +/* + * linux/arch/m32r/platforms/m32700ut/io.c + * + * Typical I/O routines for M32700UT board. + * + * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, + * Hitoshi Yamamoto, Takeo Takahashi + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of this + * archive for more details. + */ + +#include <asm/m32r.h> +#include <asm/page.h> +#include <asm/io.h> +#include <asm/byteorder.h> + +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) +#include <linux/types.h> + +#define M32R_PCC_IOMAP_SIZE 0x1000 + +#define M32R_PCC_IOSTART0 0x1000 +#define M32R_PCC_IOEND0 (M32R_PCC_IOSTART0 + M32R_PCC_IOMAP_SIZE - 1) + +extern void pcc_ioread_byte(int, unsigned long, void *, size_t, size_t, int); +extern void pcc_ioread_word(int, unsigned long, void *, size_t, size_t, int); +extern void pcc_iowrite_byte(int, unsigned long, void *, size_t, size_t, int); +extern void pcc_iowrite_word(int, unsigned long, void *, size_t, size_t, int); +#endif /* CONFIG_PCMCIA && CONFIG_M32R_CFC */ + +#define PORT2ADDR(port) _port2addr(port) +#define PORT2ADDR_USB(port) _port2addr_usb(port) + +static inline void *_port2addr(unsigned long port) +{ + return (void *)(port | NONCACHE_OFFSET); +} + +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) +static inline void *__port2addr_ata(unsigned long port) +{ + static int dummy_reg; + + switch (port) { + case 0x1f0: return (void *)(0x0c002000 | NONCACHE_OFFSET); + case 0x1f1: return (void *)(0x0c012800 | NONCACHE_OFFSET); + case 0x1f2: return (void *)(0x0c012002 | NONCACHE_OFFSET); + case 0x1f3: return (void *)(0x0c012802 | NONCACHE_OFFSET); + case 0x1f4: return (void *)(0x0c012004 | NONCACHE_OFFSET); + case 0x1f5: return (void *)(0x0c012804 | NONCACHE_OFFSET); + case 0x1f6: return (void *)(0x0c012006 | NONCACHE_OFFSET); + case 0x1f7: return (void *)(0x0c012806 | NONCACHE_OFFSET); + case 0x3f6: return (void *)(0x0c01200e | NONCACHE_OFFSET); + default: return (void *)&dummy_reg; + } +} +#endif + +/* + * M32700UT-LAN is located in the extended bus space + * from 0x10000000 to 0x13ffffff on physical address. + * The base address of LAN controller(LAN91C111) is 0x300. + */ +#define LAN_IOSTART (0x300 | NONCACHE_OFFSET) +#define LAN_IOEND (0x320 | NONCACHE_OFFSET) +static inline void *_port2addr_ne(unsigned long port) +{ + return (void *)(port + 0x10000000); +} +static inline void *_port2addr_usb(unsigned long port) +{ + return (void *)((port & 0x0f) + NONCACHE_OFFSET + 0x10303000); +} + +static inline void delay(void) +{ + __asm__ __volatile__ ("push r0; \n\t pop r0;" : : :"memory"); +} + +/* + * NIC I/O function + */ + +#define PORT2ADDR_NE(port) _port2addr_ne(port) + +static inline unsigned char _ne_inb(void *portp) +{ + return *(volatile unsigned char *)portp; +} + +static inline unsigned short _ne_inw(void *portp) +{ + return (unsigned short)le16_to_cpu(*(volatile unsigned short *)portp); +} + +static inline void _ne_insb(void *portp, void *addr, unsigned long count) +{ + unsigned char *buf = (unsigned char *)addr; + + while (count--) + *buf++ = _ne_inb(portp); +} + +static inline void _ne_outb(unsigned char b, void *portp) +{ + *(volatile unsigned char *)portp = b; +} + +static inline void _ne_outw(unsigned short w, void *portp) +{ + *(volatile unsigned short *)portp = cpu_to_le16(w); +} + +unsigned char _inb(unsigned long port) +{ + if (port >= LAN_IOSTART && port < LAN_IOEND) + return _ne_inb(PORT2ADDR_NE(port)); + +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + return *(volatile unsigned char *)__port2addr_ata(port); + } +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + unsigned char b; + pcc_ioread_byte(0, port, &b, sizeof(b), 1, 0); + return b; + } else +#endif + + return *(volatile unsigned char *)PORT2ADDR(port); +} + +unsigned short _inw(unsigned long port) +{ + if (port >= LAN_IOSTART && port < LAN_IOEND) + return _ne_inw(PORT2ADDR_NE(port)); +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + return *(volatile unsigned short *)__port2addr_ata(port); + } +#endif +#if defined(CONFIG_USB) + else if(port >= 0x340 && port < 0x3a0) + return *(volatile unsigned short *)PORT2ADDR_USB(port); +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + unsigned short w; + pcc_ioread_word(0, port, &w, sizeof(w), 1, 0); + return w; + } else +#endif + return *(volatile unsigned short *)PORT2ADDR(port); +} + +unsigned long _inl(unsigned long port) +{ +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + unsigned long l; + pcc_ioread_word(0, port, &l, sizeof(l), 1, 0); + return l; + } else +#endif + return *(volatile unsigned long *)PORT2ADDR(port); +} + +unsigned char _inb_p(unsigned long port) +{ + unsigned char v = _inb(port); + delay(); + return (v); +} + +unsigned short _inw_p(unsigned long port) +{ + unsigned short v = _inw(port); + delay(); + return (v); +} + +unsigned long _inl_p(unsigned long port) +{ + unsigned long v = _inl(port); + delay(); + return (v); +} + +void _outb(unsigned char b, unsigned long port) +{ + if (port >= LAN_IOSTART && port < LAN_IOEND) + _ne_outb(b, PORT2ADDR_NE(port)); + else +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + *(volatile unsigned char *)__port2addr_ata(port) = b; + } else +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_iowrite_byte(0, port, &b, sizeof(b), 1, 0); + } else +#endif + *(volatile unsigned char *)PORT2ADDR(port) = b; +} + +void _outw(unsigned short w, unsigned long port) +{ + if (port >= LAN_IOSTART && port < LAN_IOEND) + _ne_outw(w, PORT2ADDR_NE(port)); + else +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + *(volatile unsigned short *)__port2addr_ata(port) = w; + } else +#endif +#if defined(CONFIG_USB) + if(port >= 0x340 && port < 0x3a0) + *(volatile unsigned short *)PORT2ADDR_USB(port) = w; + else +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_iowrite_word(0, port, &w, sizeof(w), 1, 0); + } else +#endif + *(volatile unsigned short *)PORT2ADDR(port) = w; +} + +void _outl(unsigned long l, unsigned long port) +{ +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_iowrite_word(0, port, &l, sizeof(l), 1, 0); + } else +#endif + *(volatile unsigned long *)PORT2ADDR(port) = l; +} + +void _outb_p(unsigned char b, unsigned long port) +{ + _outb(b, port); + delay(); +} + +void _outw_p(unsigned short w, unsigned long port) +{ + _outw(w, port); + delay(); +} + +void _outl_p(unsigned long l, unsigned long port) +{ + _outl(l, port); + delay(); +} + +void _insb(unsigned int port, void *addr, unsigned long count) +{ + if (port >= LAN_IOSTART && port < LAN_IOEND) + _ne_insb(PORT2ADDR_NE(port), addr, count); +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + unsigned char *buf = addr; + unsigned char *portp = __port2addr_ata(port); + while (count--) + *buf++ = *(volatile unsigned char *)portp; + } +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_ioread_byte(0, port, (void *)addr, sizeof(unsigned char), + count, 1); + } +#endif + else { + unsigned char *buf = addr; + unsigned char *portp = PORT2ADDR(port); + while (count--) + *buf++ = *(volatile unsigned char *)portp; + } +} + +void _insw(unsigned int port, void *addr, unsigned long count) +{ + unsigned short *buf = addr; + unsigned short *portp; + + if (port >= LAN_IOSTART && port < LAN_IOEND) { + /* + * This portion is only used by smc91111.c to read data + * from the DATA_REG. Do not swap the data. + */ + portp = PORT2ADDR_NE(port); + while (count--) + *buf++ = *(volatile unsigned short *)portp; +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + } else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_ioread_word(9, port, (void *)addr, sizeof(unsigned short), + count, 1); +#endif +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + } else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + portp = __port2addr_ata(port); + while (count--) + *buf++ = *(volatile unsigned short *)portp; +#endif + } else { + portp = PORT2ADDR(port); + while (count--) + *buf++ = *(volatile unsigned short *)portp; + } +} + +void _insl(unsigned int port, void *addr, unsigned long count) +{ + unsigned long *buf = addr; + unsigned long *portp; + + portp = PORT2ADDR(port); + while (count--) + *buf++ = *(volatile unsigned long *)portp; +} + +void _outsb(unsigned int port, const void *addr, unsigned long count) +{ + const unsigned char *buf = addr; + unsigned char *portp; + + if (port >= LAN_IOSTART && port < LAN_IOEND) { + portp = PORT2ADDR_NE(port); + while (count--) + _ne_outb(*buf++, portp); +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + } else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + portp = __port2addr_ata(port); + while (count--) + *(volatile unsigned char *)portp = *buf++; +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + } else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_iowrite_byte(0, port, (void *)addr, sizeof(unsigned char), + count, 1); +#endif + } else { + portp = PORT2ADDR(port); + while (count--) + *(volatile unsigned char *)portp = *buf++; + } +} + +void _outsw(unsigned int port, const void *addr, unsigned long count) +{ + const unsigned short *buf = addr; + unsigned short *portp; + + if (port >= LAN_IOSTART && port < LAN_IOEND) { + /* + * This portion is only used by smc91111.c to write data + * into the DATA_REG. Do not swap the data. + */ + portp = PORT2ADDR_NE(port); + while (count--) + *(volatile unsigned short *)portp = *buf++; +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + } else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + portp = __port2addr_ata(port); + while (count--) + *(volatile unsigned short *)portp = *buf++; +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + } else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_iowrite_word(9, port, (void *)addr, sizeof(unsigned short), + count, 1); +#endif + } else { + portp = PORT2ADDR(port); + while (count--) + *(volatile unsigned short *)portp = *buf++; + } +} + +void _outsl(unsigned int port, const void *addr, unsigned long count) +{ + const unsigned long *buf = addr; + unsigned char *portp; + + portp = PORT2ADDR(port); + while (count--) + *(volatile unsigned long *)portp = *buf++; +} diff --git a/arch/m32r/platforms/m32700ut/setup.c b/arch/m32r/platforms/m32700ut/setup.c new file mode 100644 index 0000000..77b0ae9 --- /dev/null +++ b/arch/m32r/platforms/m32700ut/setup.c @@ -0,0 +1,518 @@ +/* + * linux/arch/m32r/platforms/m32700ut/setup.c + * + * Setup routines for Renesas M32700UT Board + * + * Copyright (c) 2002-2005 Hiroyuki Kondo, Hirokazu Takata, + * Hitoshi Yamamoto, Takeo Takahashi + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of this + * archive for more details. + */ + +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/system.h> +#include <asm/m32r.h> +#include <asm/io.h> + +/* + * M32700 Interrupt Control Unit (Level 1) + */ +#define irq2port(x) (M32R_ICU_CR1_PORTL + ((x - 1) * sizeof(unsigned long))) + +icu_data_t icu_data[M32700UT_NUM_CPU_IRQ]; + +static void disable_m32700ut_irq(unsigned int irq) +{ + unsigned long port, data; + + port = irq2port(irq); + data = icu_data[irq].icucr|M32R_ICUCR_ILEVEL7; + outl(data, port); +} + +static void enable_m32700ut_irq(unsigned int irq) +{ + unsigned long port, data; + + port = irq2port(irq); + data = icu_data[irq].icucr|M32R_ICUCR_IEN|M32R_ICUCR_ILEVEL6; + outl(data, port); +} + +static void mask_and_ack_m32700ut(unsigned int irq) +{ + disable_m32700ut_irq(irq); +} + +static void end_m32700ut_irq(unsigned int irq) +{ + enable_m32700ut_irq(irq); +} + +static unsigned int startup_m32700ut_irq(unsigned int irq) +{ + enable_m32700ut_irq(irq); + return (0); +} + +static void shutdown_m32700ut_irq(unsigned int irq) +{ + unsigned long port; + + port = irq2port(irq); + outl(M32R_ICUCR_ILEVEL7, port); +} + +static struct hw_interrupt_type m32700ut_irq_type = +{ + .typename = "M32700UT-IRQ", + .startup = startup_m32700ut_irq, + .shutdown = shutdown_m32700ut_irq, + .enable = enable_m32700ut_irq, + .disable = disable_m32700ut_irq, + .ack = mask_and_ack_m32700ut, + .end = end_m32700ut_irq +}; + +/* + * Interrupt Control Unit of PLD on M32700UT (Level 2) + */ +#define irq2pldirq(x) ((x) - M32700UT_PLD_IRQ_BASE) +#define pldirq2port(x) (unsigned long)((int)PLD_ICUCR1 + \ + (((x) - 1) * sizeof(unsigned short))) + +typedef struct { + unsigned short icucr; /* ICU Control Register */ +} pld_icu_data_t; + +static pld_icu_data_t pld_icu_data[M32700UT_NUM_PLD_IRQ]; + +static void disable_m32700ut_pld_irq(unsigned int irq) +{ + unsigned long port, data; + unsigned int pldirq; + + pldirq = irq2pldirq(irq); +// disable_m32700ut_irq(M32R_IRQ_INT1); + port = pldirq2port(pldirq); + data = pld_icu_data[pldirq].icucr|PLD_ICUCR_ILEVEL7; + outw(data, port); +} + +static void enable_m32700ut_pld_irq(unsigned int irq) +{ + unsigned long port, data; + unsigned int pldirq; + + pldirq = irq2pldirq(irq); +// enable_m32700ut_irq(M32R_IRQ_INT1); + port = pldirq2port(pldirq); + data = pld_icu_data[pldirq].icucr|PLD_ICUCR_IEN|PLD_ICUCR_ILEVEL6; + outw(data, port); +} + +static void mask_and_ack_m32700ut_pld(unsigned int irq) +{ + disable_m32700ut_pld_irq(irq); +// mask_and_ack_m32700ut(M32R_IRQ_INT1); +} + +static void end_m32700ut_pld_irq(unsigned int irq) +{ + enable_m32700ut_pld_irq(irq); + end_m32700ut_irq(M32R_IRQ_INT1); +} + +static unsigned int startup_m32700ut_pld_irq(unsigned int irq) +{ + enable_m32700ut_pld_irq(irq); + return (0); +} + +static void shutdown_m32700ut_pld_irq(unsigned int irq) +{ + unsigned long port; + unsigned int pldirq; + + pldirq = irq2pldirq(irq); +// shutdown_m32700ut_irq(M32R_IRQ_INT1); + port = pldirq2port(pldirq); + outw(PLD_ICUCR_ILEVEL7, port); +} + +static struct hw_interrupt_type m32700ut_pld_irq_type = +{ + .typename = "M32700UT-PLD-IRQ", + .startup = startup_m32700ut_pld_irq, + .shutdown = shutdown_m32700ut_pld_irq, + .enable = enable_m32700ut_pld_irq, + .disable = disable_m32700ut_pld_irq, + .ack = mask_and_ack_m32700ut_pld, + .end = end_m32700ut_pld_irq +}; + +/* + * Interrupt Control Unit of PLD on M32700UT-LAN (Level 2) + */ +#define irq2lanpldirq(x) ((x) - M32700UT_LAN_PLD_IRQ_BASE) +#define lanpldirq2port(x) (unsigned long)((int)M32700UT_LAN_ICUCR1 + \ + (((x) - 1) * sizeof(unsigned short))) + +static pld_icu_data_t lanpld_icu_data[M32700UT_NUM_LAN_PLD_IRQ]; + +static void disable_m32700ut_lanpld_irq(unsigned int irq) +{ + unsigned long port, data; + unsigned int pldirq; + + pldirq = irq2lanpldirq(irq); + port = lanpldirq2port(pldirq); + data = lanpld_icu_data[pldirq].icucr|PLD_ICUCR_ILEVEL7; + outw(data, port); +} + +static void enable_m32700ut_lanpld_irq(unsigned int irq) +{ + unsigned long port, data; + unsigned int pldirq; + + pldirq = irq2lanpldirq(irq); + port = lanpldirq2port(pldirq); + data = lanpld_icu_data[pldirq].icucr|PLD_ICUCR_IEN|PLD_ICUCR_ILEVEL6; + outw(data, port); +} + +static void mask_and_ack_m32700ut_lanpld(unsigned int irq) +{ + disable_m32700ut_lanpld_irq(irq); +} + +static void end_m32700ut_lanpld_irq(unsigned int irq) +{ + enable_m32700ut_lanpld_irq(irq); + end_m32700ut_irq(M32R_IRQ_INT0); +} + +static unsigned int startup_m32700ut_lanpld_irq(unsigned int irq) +{ + enable_m32700ut_lanpld_irq(irq); + return (0); +} + +static void shutdown_m32700ut_lanpld_irq(unsigned int irq) +{ + unsigned long port; + unsigned int pldirq; + + pldirq = irq2lanpldirq(irq); + port = lanpldirq2port(pldirq); + outw(PLD_ICUCR_ILEVEL7, port); +} + +static struct hw_interrupt_type m32700ut_lanpld_irq_type = +{ + .typename = "M32700UT-PLD-LAN-IRQ", + .startup = startup_m32700ut_lanpld_irq, + .shutdown = shutdown_m32700ut_lanpld_irq, + .enable = enable_m32700ut_lanpld_irq, + .disable = disable_m32700ut_lanpld_irq, + .ack = mask_and_ack_m32700ut_lanpld, + .end = end_m32700ut_lanpld_irq +}; + +/* + * Interrupt Control Unit of PLD on M32700UT-LCD (Level 2) + */ +#define irq2lcdpldirq(x) ((x) - M32700UT_LCD_PLD_IRQ_BASE) +#define lcdpldirq2port(x) (unsigned long)((int)M32700UT_LCD_ICUCR1 + \ + (((x) - 1) * sizeof(unsigned short))) + +static pld_icu_data_t lcdpld_icu_data[M32700UT_NUM_LCD_PLD_IRQ]; + +static void disable_m32700ut_lcdpld_irq(unsigned int irq) +{ + unsigned long port, data; + unsigned int pldirq; + + pldirq = irq2lcdpldirq(irq); + port = lcdpldirq2port(pldirq); + data = lcdpld_icu_data[pldirq].icucr|PLD_ICUCR_ILEVEL7; + outw(data, port); +} + +static void enable_m32700ut_lcdpld_irq(unsigned int irq) +{ + unsigned long port, data; + unsigned int pldirq; + + pldirq = irq2lcdpldirq(irq); + port = lcdpldirq2port(pldirq); + data = lcdpld_icu_data[pldirq].icucr|PLD_ICUCR_IEN|PLD_ICUCR_ILEVEL6; + outw(data, port); +} + +static void mask_and_ack_m32700ut_lcdpld(unsigned int irq) +{ + disable_m32700ut_lcdpld_irq(irq); +} + +static void end_m32700ut_lcdpld_irq(unsigned int irq) +{ + enable_m32700ut_lcdpld_irq(irq); + end_m32700ut_irq(M32R_IRQ_INT2); +} + +static unsigned int startup_m32700ut_lcdpld_irq(unsigned int irq) +{ + enable_m32700ut_lcdpld_irq(irq); + return (0); +} + +static void shutdown_m32700ut_lcdpld_irq(unsigned int irq) +{ + unsigned long port; + unsigned int pldirq; + + pldirq = irq2lcdpldirq(irq); + port = lcdpldirq2port(pldirq); + outw(PLD_ICUCR_ILEVEL7, port); +} + +static struct hw_interrupt_type m32700ut_lcdpld_irq_type = +{ + .typename = "M32700UT-PLD-LCD-IRQ", + .startup = startup_m32700ut_lcdpld_irq, + .shutdown = shutdown_m32700ut_lcdpld_irq, + .enable = enable_m32700ut_lcdpld_irq, + .disable = disable_m32700ut_lcdpld_irq, + .ack = mask_and_ack_m32700ut_lcdpld, + .end = end_m32700ut_lcdpld_irq +}; + +void __init init_IRQ(void) +{ +#if defined(CONFIG_SMC91X) + /* INT#0: LAN controller on M32700UT-LAN (SMC91C111)*/ + irq_desc[M32700UT_LAN_IRQ_LAN].status = IRQ_DISABLED; + irq_desc[M32700UT_LAN_IRQ_LAN].chip = &m32700ut_lanpld_irq_type; + irq_desc[M32700UT_LAN_IRQ_LAN].action = 0; + irq_desc[M32700UT_LAN_IRQ_LAN].depth = 1; /* disable nested irq */ + lanpld_icu_data[irq2lanpldirq(M32700UT_LAN_IRQ_LAN)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD02; /* "H" edge sense */ + disable_m32700ut_lanpld_irq(M32700UT_LAN_IRQ_LAN); +#endif /* CONFIG_SMC91X */ + + /* MFT2 : system timer */ + irq_desc[M32R_IRQ_MFT2].status = IRQ_DISABLED; + irq_desc[M32R_IRQ_MFT2].chip = &m32700ut_irq_type; + irq_desc[M32R_IRQ_MFT2].action = 0; + irq_desc[M32R_IRQ_MFT2].depth = 1; + icu_data[M32R_IRQ_MFT2].icucr = M32R_ICUCR_IEN; + disable_m32700ut_irq(M32R_IRQ_MFT2); + + /* SIO0 : receive */ + irq_desc[M32R_IRQ_SIO0_R].status = IRQ_DISABLED; + irq_desc[M32R_IRQ_SIO0_R].chip = &m32700ut_irq_type; + irq_desc[M32R_IRQ_SIO0_R].action = 0; + irq_desc[M32R_IRQ_SIO0_R].depth = 1; + icu_data[M32R_IRQ_SIO0_R].icucr = 0; + disable_m32700ut_irq(M32R_IRQ_SIO0_R); + + /* SIO0 : send */ + irq_desc[M32R_IRQ_SIO0_S].status = IRQ_DISABLED; + irq_desc[M32R_IRQ_SIO0_S].chip = &m32700ut_irq_type; + irq_desc[M32R_IRQ_SIO0_S].action = 0; + irq_desc[M32R_IRQ_SIO0_S].depth = 1; + icu_data[M32R_IRQ_SIO0_S].icucr = 0; + disable_m32700ut_irq(M32R_IRQ_SIO0_S); + + /* SIO1 : receive */ + irq_desc[M32R_IRQ_SIO1_R].status = IRQ_DISABLED; + irq_desc[M32R_IRQ_SIO1_R].chip = &m32700ut_irq_type; + irq_desc[M32R_IRQ_SIO1_R].action = 0; + irq_desc[M32R_IRQ_SIO1_R].depth = 1; + icu_data[M32R_IRQ_SIO1_R].icucr = 0; + disable_m32700ut_irq(M32R_IRQ_SIO1_R); + + /* SIO1 : send */ + irq_desc[M32R_IRQ_SIO1_S].status = IRQ_DISABLED; + irq_desc[M32R_IRQ_SIO1_S].chip = &m32700ut_irq_type; + irq_desc[M32R_IRQ_SIO1_S].action = 0; + irq_desc[M32R_IRQ_SIO1_S].depth = 1; + icu_data[M32R_IRQ_SIO1_S].icucr = 0; + disable_m32700ut_irq(M32R_IRQ_SIO1_S); + + /* DMA1 : */ + irq_desc[M32R_IRQ_DMA1].status = IRQ_DISABLED; + irq_desc[M32R_IRQ_DMA1].chip = &m32700ut_irq_type; + irq_desc[M32R_IRQ_DMA1].action = 0; + irq_desc[M32R_IRQ_DMA1].depth = 1; + icu_data[M32R_IRQ_DMA1].icucr = 0; + disable_m32700ut_irq(M32R_IRQ_DMA1); + +#ifdef CONFIG_SERIAL_M32R_PLDSIO + /* INT#1: SIO0 Receive on PLD */ + irq_desc[PLD_IRQ_SIO0_RCV].status = IRQ_DISABLED; + irq_desc[PLD_IRQ_SIO0_RCV].chip = &m32700ut_pld_irq_type; + irq_desc[PLD_IRQ_SIO0_RCV].action = 0; + irq_desc[PLD_IRQ_SIO0_RCV].depth = 1; /* disable nested irq */ + pld_icu_data[irq2pldirq(PLD_IRQ_SIO0_RCV)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD03; + disable_m32700ut_pld_irq(PLD_IRQ_SIO0_RCV); + + /* INT#1: SIO0 Send on PLD */ + irq_desc[PLD_IRQ_SIO0_SND].status = IRQ_DISABLED; + irq_desc[PLD_IRQ_SIO0_SND].chip = &m32700ut_pld_irq_type; + irq_desc[PLD_IRQ_SIO0_SND].action = 0; + irq_desc[PLD_IRQ_SIO0_SND].depth = 1; /* disable nested irq */ + pld_icu_data[irq2pldirq(PLD_IRQ_SIO0_SND)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD03; + disable_m32700ut_pld_irq(PLD_IRQ_SIO0_SND); +#endif /* CONFIG_SERIAL_M32R_PLDSIO */ + + /* INT#1: CFC IREQ on PLD */ + irq_desc[PLD_IRQ_CFIREQ].status = IRQ_DISABLED; + irq_desc[PLD_IRQ_CFIREQ].chip = &m32700ut_pld_irq_type; + irq_desc[PLD_IRQ_CFIREQ].action = 0; + irq_desc[PLD_IRQ_CFIREQ].depth = 1; /* disable nested irq */ + pld_icu_data[irq2pldirq(PLD_IRQ_CFIREQ)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD01; /* 'L' level sense */ + disable_m32700ut_pld_irq(PLD_IRQ_CFIREQ); + + /* INT#1: CFC Insert on PLD */ + irq_desc[PLD_IRQ_CFC_INSERT].status = IRQ_DISABLED; + irq_desc[PLD_IRQ_CFC_INSERT].chip = &m32700ut_pld_irq_type; + irq_desc[PLD_IRQ_CFC_INSERT].action = 0; + irq_desc[PLD_IRQ_CFC_INSERT].depth = 1; /* disable nested irq */ + pld_icu_data[irq2pldirq(PLD_IRQ_CFC_INSERT)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD00; /* 'L' edge sense */ + disable_m32700ut_pld_irq(PLD_IRQ_CFC_INSERT); + + /* INT#1: CFC Eject on PLD */ + irq_desc[PLD_IRQ_CFC_EJECT].status = IRQ_DISABLED; + irq_desc[PLD_IRQ_CFC_EJECT].chip = &m32700ut_pld_irq_type; + irq_desc[PLD_IRQ_CFC_EJECT].action = 0; + irq_desc[PLD_IRQ_CFC_EJECT].depth = 1; /* disable nested irq */ + pld_icu_data[irq2pldirq(PLD_IRQ_CFC_EJECT)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD02; /* 'H' edge sense */ + disable_m32700ut_pld_irq(PLD_IRQ_CFC_EJECT); + + /* + * INT0# is used for LAN, DIO + * We enable it here. + */ + icu_data[M32R_IRQ_INT0].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD11; + enable_m32700ut_irq(M32R_IRQ_INT0); + + /* + * INT1# is used for UART, MMC, CF Controller in FPGA. + * We enable it here. + */ + icu_data[M32R_IRQ_INT1].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD11; + enable_m32700ut_irq(M32R_IRQ_INT1); + +#if defined(CONFIG_USB) + outw(USBCR_OTGS, USBCR); /* USBCR: non-OTG */ + + irq_desc[M32700UT_LCD_IRQ_USB_INT1].status = IRQ_DISABLED; + irq_desc[M32700UT_LCD_IRQ_USB_INT1].chip = &m32700ut_lcdpld_irq_type; + irq_desc[M32700UT_LCD_IRQ_USB_INT1].action = 0; + irq_desc[M32700UT_LCD_IRQ_USB_INT1].depth = 1; + lcdpld_icu_data[irq2lcdpldirq(M32700UT_LCD_IRQ_USB_INT1)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD01; /* "L" level sense */ + disable_m32700ut_lcdpld_irq(M32700UT_LCD_IRQ_USB_INT1); +#endif + /* + * INT2# is used for BAT, USB, AUDIO + * We enable it here. + */ + icu_data[M32R_IRQ_INT2].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD01; + enable_m32700ut_irq(M32R_IRQ_INT2); + +#if defined(CONFIG_VIDEO_M32R_AR) + /* + * INT3# is used for AR + */ + irq_desc[M32R_IRQ_INT3].status = IRQ_DISABLED; + irq_desc[M32R_IRQ_INT3].chip = &m32700ut_irq_type; + irq_desc[M32R_IRQ_INT3].action = 0; + irq_desc[M32R_IRQ_INT3].depth = 1; + icu_data[M32R_IRQ_INT3].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10; + disable_m32700ut_irq(M32R_IRQ_INT3); +#endif /* CONFIG_VIDEO_M32R_AR */ +} + +#if defined(CONFIG_SMC91X) + +#define LAN_IOSTART 0x300 +#define LAN_IOEND 0x320 +static struct resource smc91x_resources[] = { + [0] = { + .start = (LAN_IOSTART), + .end = (LAN_IOEND), + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = M32700UT_LAN_IRQ_LAN, + .end = M32700UT_LAN_IRQ_LAN, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; +#endif + +#if defined(CONFIG_FB_S1D13XXX) + +#include <video/s1d13xxxfb.h> +#include <asm/s1d13806.h> + +static struct s1d13xxxfb_pdata s1d13xxxfb_data = { + .initregs = s1d13xxxfb_initregs, + .initregssize = ARRAY_SIZE(s1d13xxxfb_initregs), + .platform_init_video = NULL, +#ifdef CONFIG_PM + .platform_suspend_video = NULL, + .platform_resume_video = NULL, +#endif +}; + +static struct resource s1d13xxxfb_resources[] = { + [0] = { + .start = 0x10600000UL, + .end = 0x1073FFFFUL, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 0x10400000UL, + .end = 0x104001FFUL, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device s1d13xxxfb_device = { + .name = S1D_DEVICENAME, + .id = 0, + .dev = { + .platform_data = &s1d13xxxfb_data, + }, + .num_resources = ARRAY_SIZE(s1d13xxxfb_resources), + .resource = s1d13xxxfb_resources, +}; +#endif + +static int __init platform_init(void) +{ +#if defined(CONFIG_SMC91X) + platform_device_register(&smc91x_device); +#endif +#if defined(CONFIG_FB_S1D13XXX) + platform_device_register(&s1d13xxxfb_device); +#endif + return 0; +} +arch_initcall(platform_init); |