diff options
Diffstat (limited to 'arch/microblaze/platform')
| -rw-r--r-- | arch/microblaze/platform/Kconfig.platform | 85 | ||||
| -rw-r--r-- | arch/microblaze/platform/Makefile | 6 | ||||
| -rw-r--r-- | arch/microblaze/platform/generic/Kconfig.auto | 62 | ||||
| -rw-r--r-- | arch/microblaze/platform/generic/Makefile | 3 | ||||
| -rw-r--r-- | arch/microblaze/platform/generic/system.dts | 332 | ||||
| -rw-r--r-- | arch/microblaze/platform/platform.c | 31 |
6 files changed, 519 insertions, 0 deletions
diff --git a/arch/microblaze/platform/Kconfig.platform b/arch/microblaze/platform/Kconfig.platform new file mode 100644 index 0000000..8e9b475 --- /dev/null +++ b/arch/microblaze/platform/Kconfig.platform @@ -0,0 +1,85 @@ +# For a description of the syntax of this configuration file, +# see Documentation/kbuild/kconfig-language.txt. +# +# Platform selection Kconfig menu for MicroBlaze targets +# + +menu "Platform options" +choice + prompt "Platform" + default PLATFORM_MICROBLAZE_AUTO + help + Choose which hardware board/platform you are targeting. + +config PLATFORM_GENERIC + bool "Generic" + help + Choose this option for the Generic platform. + +endchoice + +config SELFMOD + bool "Use self modified code for intc/timer" + depends on EXPERIMENTAL && NO_MMU + default n + help + This choice enables self-modified code for interrupt controller + and timer. + +config SELFMOD_INTC + bool "Use self modified code for intc" + depends on SELFMOD + default y + help + This choice enables self-modified code for interrupt controller. + +config SELFMOD_TIMER + bool "Use self modified code for timer" + depends on SELFMOD + default y + help + This choice enables self-modified code for timer. + +config OPT_LIB_FUNCTION + bool "Optimalized lib function" + default y + help + Allows turn on optimalized library function (memcpy and memmove). + They are optimized by using word alignment. This will work + fine if both source and destination are aligned on the same + boundary. However, if they are aligned on different boundaries + shifts will be necessary. This might result in bad performance + on MicroBlaze systems without a barrel shifter. + +config OPT_LIB_ASM + bool "Optimalized lib function ASM" + depends on OPT_LIB_FUNCTION + default n + help + Allows turn on optimalized library function (memcpy and memmove). + Function are written in asm code. + +# This is still a bit broken - disabling for now JW 20070504 +config ALLOW_EDIT_AUTO + bool "Permit Display/edit of Kconfig.auto platform settings" + default n + help + Allows the editing of auto-generated platform settings from + the Kconfig.auto file. Obviously this does not change the + underlying hardware, so be very careful if you go editing + these settings. + + Also, if you enable this, and edit various Kconfig.auto + settings, YOUR CHANGES WILL BE LOST if you then disable it + again. You have been warned! + + If unsure, say no. + +comment "Automatic platform settings from Kconfig.auto" + depends on ALLOW_EDIT_AUTO + +if PLATFORM_GENERIC=y + source "arch/microblaze/platform/generic/Kconfig.auto" +endif + +endmenu diff --git a/arch/microblaze/platform/Makefile b/arch/microblaze/platform/Makefile new file mode 100644 index 0000000..ea1b75c --- /dev/null +++ b/arch/microblaze/platform/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for arch/microblaze/platform directory +# +#obj-$(CONFIG_PLATFORM_GENERIC) += generic/ + +obj-y += platform.o diff --git a/arch/microblaze/platform/generic/Kconfig.auto b/arch/microblaze/platform/generic/Kconfig.auto new file mode 100644 index 0000000..fbca22d --- /dev/null +++ b/arch/microblaze/platform/generic/Kconfig.auto @@ -0,0 +1,62 @@ +# +# (C) Copyright 2007 Michal Simek +# +# Michal SIMEK <monstr@monstr.eu> +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# Definitions for MICROBLAZE0 +comment "Definitions for MICROBLAZE0" + depends on ALLOW_EDIT_AUTO + +config KERNEL_BASE_ADDR + hex "Physical address where Linux Kernel is" + default "0x90000000" + help + BASE Address for kernel + +config XILINX_MICROBLAZE0_FAMILY + string "Targetted FPGA family" if ALLOW_EDIT_AUTO + default "virtex5" + +config XILINX_MICROBLAZE0_USE_MSR_INSTR + int "USE_MSR_INSTR range (0:1)" if ALLOW_EDIT_AUTO + default 1 + +config XILINX_MICROBLAZE0_USE_PCMP_INSTR + int "USE_PCMP_INSTR range (0:1)" if ALLOW_EDIT_AUTO + default 1 + +config XILINX_MICROBLAZE0_USE_BARREL + int "USE_BARREL range (0:1)" if ALLOW_EDIT_AUTO + default 1 + +config XILINX_MICROBLAZE0_USE_DIV + int "USE_DIV range (0:1)" if ALLOW_EDIT_AUTO + default 1 + +config XILINX_MICROBLAZE0_USE_HW_MUL + int "USE_HW_MUL values (0=NONE, 1=MUL32, 2=MUL64)" if ALLOW_EDIT_AUTO + default 2 + +config XILINX_MICROBLAZE0_USE_FPU + int "USE_FPU values (0=NONE, 1=BASIC, 2=EXTENDED)" if ALLOW_EDIT_AUTO + default 2 + +config XILINX_MICROBLAZE0_HW_VER + string "Core version number" if ALLOW_EDIT_AUTO + default 7.10.d diff --git a/arch/microblaze/platform/generic/Makefile b/arch/microblaze/platform/generic/Makefile new file mode 100644 index 0000000..9a8b1bd --- /dev/null +++ b/arch/microblaze/platform/generic/Makefile @@ -0,0 +1,3 @@ +# +# Empty Makefile to keep make clean happy +# diff --git a/arch/microblaze/platform/generic/system.dts b/arch/microblaze/platform/generic/system.dts new file mode 100644 index 0000000..29993f6 --- /dev/null +++ b/arch/microblaze/platform/generic/system.dts @@ -0,0 +1,332 @@ +/* + * Device Tree Generator version: 1.1 + * + * (C) Copyright 2007-2008 Xilinx, Inc. + * (C) Copyright 2007-2009 Michal Simek + * + * Michal SIMEK <monstr@monstr.eu> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * CAUTION: This file is automatically generated by libgen. + * Version: Xilinx EDK 10.1.03 EDK_K_SP3.6 + * + * XPS project directory: Xilinx-ML505-ll_temac-sgdma-MMU-FDT-edk101 + */ + +/dts-v1/; +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "xlnx,microblaze"; + model = "testing"; + DDR2_SDRAM: memory@90000000 { + device_type = "memory"; + reg = < 0x90000000 0x10000000 >; + } ; + chosen { + bootargs = "console=ttyUL0,115200 highres=on"; + linux,stdout-path = "/plb@0/serial@84000000"; + } ; + cpus { + #address-cells = <1>; + #cpus = <0x1>; + #size-cells = <0>; + microblaze_0: cpu@0 { + clock-frequency = <125000000>; + compatible = "xlnx,microblaze-7.10.d"; + d-cache-baseaddr = <0x90000000>; + d-cache-highaddr = <0x9fffffff>; + d-cache-line-size = <0x10>; + d-cache-size = <0x2000>; + device_type = "cpu"; + i-cache-baseaddr = <0x90000000>; + i-cache-highaddr = <0x9fffffff>; + i-cache-line-size = <0x10>; + i-cache-size = <0x2000>; + model = "microblaze,7.10.d"; + reg = <0>; + timebase-frequency = <125000000>; + xlnx,addr-tag-bits = <0xf>; + xlnx,allow-dcache-wr = <0x1>; + xlnx,allow-icache-wr = <0x1>; + xlnx,area-optimized = <0x0>; + xlnx,cache-byte-size = <0x2000>; + xlnx,d-lmb = <0x1>; + xlnx,d-opb = <0x0>; + xlnx,d-plb = <0x1>; + xlnx,data-size = <0x20>; + xlnx,dcache-addr-tag = <0xf>; + xlnx,dcache-always-used = <0x1>; + xlnx,dcache-byte-size = <0x2000>; + xlnx,dcache-line-len = <0x4>; + xlnx,dcache-use-fsl = <0x1>; + xlnx,debug-enabled = <0x1>; + xlnx,div-zero-exception = <0x1>; + xlnx,dopb-bus-exception = <0x0>; + xlnx,dynamic-bus-sizing = <0x1>; + xlnx,edge-is-positive = <0x1>; + xlnx,family = "virtex5"; + xlnx,fpu-exception = <0x1>; + xlnx,fsl-data-size = <0x20>; + xlnx,fsl-exception = <0x0>; + xlnx,fsl-links = <0x0>; + xlnx,i-lmb = <0x1>; + xlnx,i-opb = <0x0>; + xlnx,i-plb = <0x1>; + xlnx,icache-always-used = <0x1>; + xlnx,icache-line-len = <0x4>; + xlnx,icache-use-fsl = <0x1>; + xlnx,ill-opcode-exception = <0x1>; + xlnx,instance = "microblaze_0"; + xlnx,interconnect = <0x1>; + xlnx,interrupt-is-edge = <0x0>; + xlnx,iopb-bus-exception = <0x0>; + xlnx,mmu-dtlb-size = <0x4>; + xlnx,mmu-itlb-size = <0x2>; + xlnx,mmu-tlb-access = <0x3>; + xlnx,mmu-zones = <0x10>; + xlnx,number-of-pc-brk = <0x1>; + xlnx,number-of-rd-addr-brk = <0x0>; + xlnx,number-of-wr-addr-brk = <0x0>; + xlnx,opcode-0x0-illegal = <0x1>; + xlnx,pvr = <0x2>; + xlnx,pvr-user1 = <0x0>; + xlnx,pvr-user2 = <0x0>; + xlnx,reset-msr = <0x0>; + xlnx,sco = <0x0>; + xlnx,unaligned-exceptions = <0x1>; + xlnx,use-barrel = <0x1>; + xlnx,use-dcache = <0x1>; + xlnx,use-div = <0x1>; + xlnx,use-ext-brk = <0x1>; + xlnx,use-ext-nm-brk = <0x1>; + xlnx,use-extended-fsl-instr = <0x0>; + xlnx,use-fpu = <0x2>; + xlnx,use-hw-mul = <0x2>; + xlnx,use-icache = <0x1>; + xlnx,use-interrupt = <0x1>; + xlnx,use-mmu = <0x3>; + xlnx,use-msr-instr = <0x1>; + xlnx,use-pcmp-instr = <0x1>; + } ; + } ; + mb_plb: plb@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "xlnx,plb-v46-1.03.a", "simple-bus"; + ranges ; + FLASH: flash@a0000000 { + bank-width = <2>; + compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash"; + reg = < 0xa0000000 0x2000000 >; + xlnx,family = "virtex5"; + xlnx,include-datawidth-matching-0 = <0x1>; + xlnx,include-datawidth-matching-1 = <0x0>; + xlnx,include-datawidth-matching-2 = <0x0>; + xlnx,include-datawidth-matching-3 = <0x0>; + xlnx,include-negedge-ioregs = <0x0>; + xlnx,include-plb-ipif = <0x1>; + xlnx,include-wrbuf = <0x1>; + xlnx,max-mem-width = <0x10>; + xlnx,mch-native-dwidth = <0x20>; + xlnx,mch-plb-clk-period-ps = <0x1f40>; + xlnx,mch-splb-awidth = <0x20>; + xlnx,mch0-accessbuf-depth = <0x10>; + xlnx,mch0-protocol = <0x0>; + xlnx,mch0-rddatabuf-depth = <0x10>; + xlnx,mch1-accessbuf-depth = <0x10>; + xlnx,mch1-protocol = <0x0>; + xlnx,mch1-rddatabuf-depth = <0x10>; + xlnx,mch2-accessbuf-depth = <0x10>; + xlnx,mch2-protocol = <0x0>; + xlnx,mch2-rddatabuf-depth = <0x10>; + xlnx,mch3-accessbuf-depth = <0x10>; + xlnx,mch3-protocol = <0x0>; + xlnx,mch3-rddatabuf-depth = <0x10>; + xlnx,mem0-width = <0x10>; + xlnx,mem1-width = <0x20>; + xlnx,mem2-width = <0x20>; + xlnx,mem3-width = <0x20>; + xlnx,num-banks-mem = <0x1>; + xlnx,num-channels = <0x0>; + xlnx,priority-mode = <0x0>; + xlnx,synch-mem-0 = <0x0>; + xlnx,synch-mem-1 = <0x0>; + xlnx,synch-mem-2 = <0x0>; + xlnx,synch-mem-3 = <0x0>; + xlnx,synch-pipedelay-0 = <0x2>; + xlnx,synch-pipedelay-1 = <0x2>; + xlnx,synch-pipedelay-2 = <0x2>; + xlnx,synch-pipedelay-3 = <0x2>; + xlnx,tavdv-ps-mem-0 = <0x1adb0>; + xlnx,tavdv-ps-mem-1 = <0x3a98>; + xlnx,tavdv-ps-mem-2 = <0x3a98>; + xlnx,tavdv-ps-mem-3 = <0x3a98>; + xlnx,tcedv-ps-mem-0 = <0x1adb0>; + xlnx,tcedv-ps-mem-1 = <0x3a98>; + xlnx,tcedv-ps-mem-2 = <0x3a98>; + xlnx,tcedv-ps-mem-3 = <0x3a98>; + xlnx,thzce-ps-mem-0 = <0x88b8>; + xlnx,thzce-ps-mem-1 = <0x1b58>; + xlnx,thzce-ps-mem-2 = <0x1b58>; + xlnx,thzce-ps-mem-3 = <0x1b58>; + xlnx,thzoe-ps-mem-0 = <0x1b58>; + xlnx,thzoe-ps-mem-1 = <0x1b58>; + xlnx,thzoe-ps-mem-2 = <0x1b58>; + xlnx,thzoe-ps-mem-3 = <0x1b58>; + xlnx,tlzwe-ps-mem-0 = <0x88b8>; + xlnx,tlzwe-ps-mem-1 = <0x0>; + xlnx,tlzwe-ps-mem-2 = <0x0>; + xlnx,tlzwe-ps-mem-3 = <0x0>; + xlnx,twc-ps-mem-0 = <0x2af8>; + xlnx,twc-ps-mem-1 = <0x3a98>; + xlnx,twc-ps-mem-2 = <0x3a98>; + xlnx,twc-ps-mem-3 = <0x3a98>; + xlnx,twp-ps-mem-0 = <0x11170>; + xlnx,twp-ps-mem-1 = <0x2ee0>; + xlnx,twp-ps-mem-2 = <0x2ee0>; + xlnx,twp-ps-mem-3 = <0x2ee0>; + xlnx,xcl0-linesize = <0x4>; + xlnx,xcl0-writexfer = <0x1>; + xlnx,xcl1-linesize = <0x4>; + xlnx,xcl1-writexfer = <0x1>; + xlnx,xcl2-linesize = <0x4>; + xlnx,xcl2-writexfer = <0x1>; + xlnx,xcl3-linesize = <0x4>; + xlnx,xcl3-writexfer = <0x1>; + } ; + Hard_Ethernet_MAC: xps-ll-temac@81c00000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "xlnx,compound"; + ethernet@81c00000 { + compatible = "xlnx,xps-ll-temac-1.01.b"; + device_type = "network"; + interrupt-parent = <&xps_intc_0>; + interrupts = < 5 2 >; + llink-connected = <&PIM3>; + local-mac-address = [ 02 00 00 00 00 00 ]; + reg = < 0x81c00000 0x40 >; + xlnx,bus2core-clk-ratio = <0x1>; + xlnx,phy-type = <0x1>; + xlnx,phyaddr = <0x1>; + xlnx,rxcsum = <0x0>; + xlnx,rxfifo = <0x1000>; + xlnx,temac-type = <0x0>; + xlnx,txcsum = <0x0>; + xlnx,txfifo = <0x1000>; + } ; + } ; + IIC_EEPROM: i2c@81600000 { + compatible = "xlnx,xps-iic-2.00.a"; + interrupt-parent = <&xps_intc_0>; + interrupts = < 6 2 >; + reg = < 0x81600000 0x10000 >; + xlnx,clk-freq = <0x7735940>; + xlnx,family = "virtex5"; + xlnx,gpo-width = <0x1>; + xlnx,iic-freq = <0x186a0>; + xlnx,scl-inertial-delay = <0x0>; + xlnx,sda-inertial-delay = <0x0>; + xlnx,ten-bit-adr = <0x0>; + } ; + LEDs_8Bit: gpio@81400000 { + compatible = "xlnx,xps-gpio-1.00.a"; + interrupt-parent = <&xps_intc_0>; + interrupts = < 7 2 >; + reg = < 0x81400000 0x10000 >; + xlnx,all-inputs = <0x0>; + xlnx,all-inputs-2 = <0x0>; + xlnx,dout-default = <0x0>; + xlnx,dout-default-2 = <0x0>; + xlnx,family = "virtex5"; + xlnx,gpio-width = <0x8>; + xlnx,interrupt-present = <0x1>; + xlnx,is-bidir = <0x1>; + xlnx,is-bidir-2 = <0x1>; + xlnx,is-dual = <0x0>; + xlnx,tri-default = <0xffffffff>; + xlnx,tri-default-2 = <0xffffffff>; + } ; + RS232_Uart_1: serial@84000000 { + clock-frequency = <125000000>; + compatible = "xlnx,xps-uartlite-1.00.a"; + current-speed = <115200>; + device_type = "serial"; + interrupt-parent = <&xps_intc_0>; + interrupts = < 8 0 >; + port-number = <0>; + reg = < 0x84000000 0x10000 >; + xlnx,baudrate = <0x1c200>; + xlnx,data-bits = <0x8>; + xlnx,family = "virtex5"; + xlnx,odd-parity = <0x0>; + xlnx,use-parity = <0x0>; + } ; + SysACE_CompactFlash: sysace@83600000 { + compatible = "xlnx,xps-sysace-1.00.a"; + interrupt-parent = <&xps_intc_0>; + interrupts = < 4 2 >; + reg = < 0x83600000 0x10000 >; + xlnx,family = "virtex5"; + xlnx,mem-width = <0x10>; + } ; + debug_module: debug@84400000 { + compatible = "xlnx,mdm-1.00.d"; + reg = < 0x84400000 0x10000 >; + xlnx,family = "virtex5"; + xlnx,interconnect = <0x1>; + xlnx,jtag-chain = <0x2>; + xlnx,mb-dbg-ports = <0x1>; + xlnx,uart-width = <0x8>; + xlnx,use-uart = <0x1>; + xlnx,write-fsl-ports = <0x0>; + } ; + mpmc@90000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "xlnx,mpmc-4.02.a"; + PIM3: sdma@84600180 { + compatible = "xlnx,ll-dma-1.00.a"; + interrupt-parent = <&xps_intc_0>; + interrupts = < 2 2 1 2 >; + reg = < 0x84600180 0x80 >; + } ; + } ; + xps_intc_0: interrupt-controller@81800000 { + #interrupt-cells = <0x2>; + compatible = "xlnx,xps-intc-1.00.a"; + interrupt-controller ; + reg = < 0x81800000 0x10000 >; + xlnx,kind-of-intr = <0x100>; + xlnx,num-intr-inputs = <0x9>; + } ; + xps_timer_1: timer@83c00000 { + compatible = "xlnx,xps-timer-1.00.a"; + interrupt-parent = <&xps_intc_0>; + interrupts = < 3 2 >; + reg = < 0x83c00000 0x10000 >; + xlnx,count-width = <0x20>; + xlnx,family = "virtex5"; + xlnx,gen0-assert = <0x1>; + xlnx,gen1-assert = <0x1>; + xlnx,one-timer-only = <0x0>; + xlnx,trig0-assert = <0x1>; + xlnx,trig1-assert = <0x1>; + } ; + } ; +} ; diff --git a/arch/microblaze/platform/platform.c b/arch/microblaze/platform/platform.c new file mode 100644 index 0000000..56e0234 --- /dev/null +++ b/arch/microblaze/platform/platform.c @@ -0,0 +1,31 @@ +/* + * Copyright 2008 Michal Simek <monstr@monstr.eu> + * + * based on virtex.c file + * + * Copyright 2007 Secret Lab Technologies Ltd. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <linux/init.h> +#include <linux/of_platform.h> +#include <asm/prom.h> + +static struct of_device_id xilinx_of_bus_ids[] __initdata = { + { .compatible = "simple-bus", }, + { .compatible = "xlnx,plb-v46-1.00.a", }, + { .compatible = "xlnx,opb-v20-1.10.c", }, + { .compatible = "xlnx,opb-v20-1.10.b", }, + { .compatible = "xlnx,compound", }, + {} +}; + +static int __init microblaze_device_probe(void) +{ + of_platform_bus_probe(NULL, xilinx_of_bus_ids, NULL); + return 0; +} +device_initcall(microblaze_device_probe); |