diff options
Diffstat (limited to 'arch/mips/alchemy')
52 files changed, 6647 insertions, 0 deletions
diff --git a/arch/mips/alchemy/Kconfig b/arch/mips/alchemy/Kconfig new file mode 100644 index 0000000..e4a057d --- /dev/null +++ b/arch/mips/alchemy/Kconfig @@ -0,0 +1,136 @@ +choice + prompt "Machine type" + depends on MACH_ALCHEMY + default MIPS_DB1000 + +config MIPS_MTX1 + bool "4G Systems MTX-1 board" + select DMA_NONCOHERENT + select HW_HAS_PCI + select SOC_AU1500 + select SYS_SUPPORTS_LITTLE_ENDIAN + +config MIPS_BOSPORUS + bool "Alchemy Bosporus board" + select SOC_AU1500 + select DMA_NONCOHERENT + select SYS_SUPPORTS_LITTLE_ENDIAN + +config MIPS_DB1000 + bool "Alchemy DB1000 board" + select SOC_AU1000 + select DMA_NONCOHERENT + select HW_HAS_PCI + select SYS_SUPPORTS_LITTLE_ENDIAN + +config MIPS_DB1100 + bool "Alchemy DB1100 board" + select SOC_AU1100 + select DMA_NONCOHERENT + select SYS_SUPPORTS_LITTLE_ENDIAN + +config MIPS_DB1200 + bool "Alchemy DB1200 board" + select SOC_AU1200 + select DMA_COHERENT + select MIPS_DISABLE_OBSOLETE_IDE + select SYS_SUPPORTS_LITTLE_ENDIAN + +config MIPS_DB1500 + bool "Alchemy DB1500 board" + select SOC_AU1500 + select DMA_NONCOHERENT + select HW_HAS_PCI + select MIPS_DISABLE_OBSOLETE_IDE + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_LITTLE_ENDIAN + +config MIPS_DB1550 + bool "Alchemy DB1550 board" + select SOC_AU1550 + select HW_HAS_PCI + select DMA_NONCOHERENT + select MIPS_DISABLE_OBSOLETE_IDE + select SYS_SUPPORTS_LITTLE_ENDIAN + +config MIPS_MIRAGE + bool "Alchemy Mirage board" + select DMA_NONCOHERENT + select SOC_AU1500 + select SYS_SUPPORTS_LITTLE_ENDIAN + +config MIPS_PB1000 + bool "Alchemy PB1000 board" + select SOC_AU1000 + select DMA_NONCOHERENT + select HW_HAS_PCI + select SWAP_IO_SPACE + select SYS_SUPPORTS_LITTLE_ENDIAN + +config MIPS_PB1100 + bool "Alchemy PB1100 board" + select SOC_AU1100 + select DMA_NONCOHERENT + select HW_HAS_PCI + select SWAP_IO_SPACE + select SYS_SUPPORTS_LITTLE_ENDIAN + +config MIPS_PB1200 + bool "Alchemy PB1200 board" + select SOC_AU1200 + select DMA_NONCOHERENT + select MIPS_DISABLE_OBSOLETE_IDE + select SYS_SUPPORTS_LITTLE_ENDIAN + +config MIPS_PB1500 + bool "Alchemy PB1500 board" + select SOC_AU1500 + select DMA_NONCOHERENT + select HW_HAS_PCI + select SYS_SUPPORTS_LITTLE_ENDIAN + +config MIPS_PB1550 + bool "Alchemy PB1550 board" + select SOC_AU1550 + select DMA_NONCOHERENT + select HW_HAS_PCI + select MIPS_DISABLE_OBSOLETE_IDE + select SYS_SUPPORTS_LITTLE_ENDIAN + +config MIPS_XXS1500 + bool "MyCable XXS1500 board" + select DMA_NONCOHERENT + select SOC_AU1500 + select SYS_SUPPORTS_LITTLE_ENDIAN + +endchoice + +config SOC_AU1000 + bool + select SOC_AU1X00 + +config SOC_AU1100 + bool + select SOC_AU1X00 + +config SOC_AU1500 + bool + select SOC_AU1X00 + +config SOC_AU1550 + bool + select SOC_AU1X00 + +config SOC_AU1200 + bool + select SOC_AU1X00 + +config SOC_AU1X00 + bool + select 64BIT_PHYS_ADDR + select CEVT_R4K + select CSRC_R4K + select IRQ_CPU + select SYS_HAS_CPU_MIPS32_R1 + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_APM_EMULATION diff --git a/arch/mips/alchemy/common/Makefile b/arch/mips/alchemy/common/Makefile new file mode 100644 index 0000000..df48fd6 --- /dev/null +++ b/arch/mips/alchemy/common/Makefile @@ -0,0 +1,14 @@ +# +# Copyright 2000, 2008 MontaVista Software Inc. +# Author: MontaVista Software, Inc. <source@mvista.com> +# +# Makefile for the Alchemy Au1xx0 CPUs, generic files. +# + +obj-y += prom.o irq.o puts.o time.o reset.o \ + au1xxx_irqmap.o clocks.o platform.o power.o setup.o \ + sleeper.o cputable.o dma.o dbdma.o gpio.o + +obj-$(CONFIG_PCI) += pci.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/mips/alchemy/common/au1xxx_irqmap.c b/arch/mips/alchemy/common/au1xxx_irqmap.c new file mode 100644 index 0000000..c7ca159 --- /dev/null +++ b/arch/mips/alchemy/common/au1xxx_irqmap.c @@ -0,0 +1,205 @@ +/* + * BRIEF MODULE DESCRIPTION + * Au1xxx processor specific IRQ tables + * + * Copyright 2004 Embedded Edge, LLC + * dan@embeddededge.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include <linux/init.h> +#include <linux/kernel.h> + +#include <au1000.h> + +/* The IC0 interrupt table. This is processor, rather than + * board dependent, so no reason to keep this info in the board + * dependent files. + * + * Careful if you change match 2 request! + * The interrupt handler is called directly from the low level dispatch code. + */ +struct au1xxx_irqmap __initdata au1xxx_ic0_map[] = { + +#if defined(CONFIG_SOC_AU1000) + { AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_UART1_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_UART2_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_UART3_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_SSI0_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_SSI1_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 }, + { AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 }, + { AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 }, + +#elif defined(CONFIG_SOC_AU1500) + + { AU1500_UART0_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_PCI_INTA, INTC_INT_LOW_LEVEL, 0 }, + { AU1000_PCI_INTB, INTC_INT_LOW_LEVEL, 0 }, + { AU1500_UART3_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_PCI_INTC, INTC_INT_LOW_LEVEL, 0 }, + { AU1000_PCI_INTD, INTC_INT_LOW_LEVEL, 0 }, + { AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 }, + { AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 }, + { AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1500_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1500_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 }, + +#elif defined(CONFIG_SOC_AU1100) + + { AU1100_UART0_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1100_UART1_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1100_SD_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1100_UART3_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_SSI0_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_SSI1_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 }, + { AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 }, + { AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1100_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 }, + /* { AU1000_GPIO215_208_INT, INTC_INT_HIGH_LEVEL, 0 }, */ + { AU1100_LCD_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 }, + +#elif defined(CONFIG_SOC_AU1550) + + { AU1550_UART0_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1550_PCI_INTA, INTC_INT_LOW_LEVEL, 0 }, + { AU1550_PCI_INTB, INTC_INT_LOW_LEVEL, 0 }, + { AU1550_DDMA_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1550_CRYPTO_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1550_PCI_INTC, INTC_INT_LOW_LEVEL, 0 }, + { AU1550_PCI_INTD, INTC_INT_LOW_LEVEL, 0 }, + { AU1550_PCI_RST_INT, INTC_INT_LOW_LEVEL, 0 }, + { AU1550_UART1_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1550_UART3_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1550_PSC0_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1550_PSC1_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1550_PSC2_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1550_PSC3_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 }, + { AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1550_NAND_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1550_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1550_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1550_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 }, + { AU1550_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1550_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0 }, + +#elif defined(CONFIG_SOC_AU1200) + + { AU1200_UART0_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1200_SWT_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1200_SD_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1200_DDMA_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1200_MAE_BE_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1200_UART1_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1200_MAE_FE_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1200_PSC0_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1200_PSC1_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1200_AES_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1200_CAMERA_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 }, + { AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1200_NAND_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1200_USB_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1200_LCD_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1200_MAE_BOTH_INT, INTC_INT_HIGH_LEVEL, 0 }, + +#else +#error "Error: Unknown Alchemy SOC" +#endif + +}; + +int __initdata au1xxx_ic0_nr_irqs = ARRAY_SIZE(au1xxx_ic0_map); diff --git a/arch/mips/alchemy/common/clocks.c b/arch/mips/alchemy/common/clocks.c new file mode 100644 index 0000000..043429d --- /dev/null +++ b/arch/mips/alchemy/common/clocks.c @@ -0,0 +1,93 @@ +/* + * BRIEF MODULE DESCRIPTION + * Simple Au1xx0 clocks routines. + * + * Copyright 2001, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <asm/mach-au1x00/au1000.h> + +static unsigned int au1x00_clock; /* Hz */ +static unsigned int lcd_clock; /* KHz */ +static unsigned long uart_baud_base; + +/* + * Set the au1000_clock + */ +void set_au1x00_speed(unsigned int new_freq) +{ + au1x00_clock = new_freq; +} + +unsigned int get_au1x00_speed(void) +{ + return au1x00_clock; +} +EXPORT_SYMBOL(get_au1x00_speed); + +/* + * The UART baud base is not known at compile time ... if + * we want to be able to use the same code on different + * speed CPUs. + */ +unsigned long get_au1x00_uart_baud_base(void) +{ + return uart_baud_base; +} + +void set_au1x00_uart_baud_base(unsigned long new_baud_base) +{ + uart_baud_base = new_baud_base; +} + +/* + * Calculate the Au1x00's LCD clock based on the current + * cpu clock and the system bus clock, and try to keep it + * below 40 MHz (the Pb1000 board can lock-up if the LCD + * clock is over 40 MHz). + */ +void set_au1x00_lcd_clock(void) +{ + unsigned int static_cfg0; + unsigned int sys_busclk = (get_au1x00_speed() / 1000) / + ((int)(au_readl(SYS_POWERCTRL) & 0x03) + 2); + + static_cfg0 = au_readl(MEM_STCFG0); + + if (static_cfg0 & (1 << 11)) + lcd_clock = sys_busclk / 5; /* note: BCLK switching fails with D5 */ + else + lcd_clock = sys_busclk / 4; + + if (lcd_clock > 50000) /* Epson MAX */ + printk(KERN_WARNING "warning: LCD clock too high (%u KHz)\n", + lcd_clock); +} + +unsigned int get_au1x00_lcd_clock(void) +{ + return lcd_clock; +} +EXPORT_SYMBOL(get_au1x00_lcd_clock); diff --git a/arch/mips/alchemy/common/cputable.c b/arch/mips/alchemy/common/cputable.c new file mode 100644 index 0000000..ba6430b --- /dev/null +++ b/arch/mips/alchemy/common/cputable.c @@ -0,0 +1,52 @@ +/* + * arch/mips/au1000/common/cputable.c + * + * Copyright (C) 2004 Dan Malek (dan@embeddededge.com) + * Copied from PowerPC and updated for Alchemy Au1xxx processors. + * + * Copyright (C) 2001 Ben. Herrenschmidt (benh@kernel.crashing.org) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <asm/mach-au1x00/au1000.h> + +struct cpu_spec *cur_cpu_spec[NR_CPUS]; + +/* With some thought, we can probably use the mask to reduce the + * size of the table. + */ +struct cpu_spec cpu_specs[] = { + { 0xffffffff, 0x00030100, "Au1000 DA", 1, 0, 1 }, + { 0xffffffff, 0x00030201, "Au1000 HA", 1, 0, 1 }, + { 0xffffffff, 0x00030202, "Au1000 HB", 1, 0, 1 }, + { 0xffffffff, 0x00030203, "Au1000 HC", 1, 1, 0 }, + { 0xffffffff, 0x00030204, "Au1000 HD", 1, 1, 0 }, + { 0xffffffff, 0x01030200, "Au1500 AB", 1, 1, 0 }, + { 0xffffffff, 0x01030201, "Au1500 AC", 0, 1, 0 }, + { 0xffffffff, 0x01030202, "Au1500 AD", 0, 1, 0 }, + { 0xffffffff, 0x02030200, "Au1100 AB", 1, 1, 0 }, + { 0xffffffff, 0x02030201, "Au1100 BA", 1, 1, 0 }, + { 0xffffffff, 0x02030202, "Au1100 BC", 1, 1, 0 }, + { 0xffffffff, 0x02030203, "Au1100 BD", 0, 1, 0 }, + { 0xffffffff, 0x02030204, "Au1100 BE", 0, 1, 0 }, + { 0xffffffff, 0x03030200, "Au1550 AA", 0, 1, 0 }, + { 0xffffffff, 0x04030200, "Au1200 AB", 0, 0, 0 }, + { 0xffffffff, 0x04030201, "Au1200 AC", 1, 0, 0 }, + { 0x00000000, 0x00000000, "Unknown Au1xxx", 1, 0, 0 } +}; + +void set_cpuspec(void) +{ + struct cpu_spec *sp; + u32 prid; + + prid = read_c0_prid(); + sp = cpu_specs; + while ((prid & sp->prid_mask) != sp->prid_value) + sp++; + cur_cpu_spec[0] = sp; +} diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c new file mode 100644 index 0000000..601ee91 --- /dev/null +++ b/arch/mips/alchemy/common/dbdma.c @@ -0,0 +1,978 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * The Descriptor Based DMA channel manager that first appeared + * on the Au1550. I started with dma.c, but I think all that is + * left is this initial comment :-) + * + * Copyright 2004 Embedded Edge, LLC + * dan@embeddededge.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <asm/mach-au1x00/au1000.h> +#include <asm/mach-au1x00/au1xxx_dbdma.h> + +#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) + +/* + * The Descriptor Based DMA supports up to 16 channels. + * + * There are 32 devices defined. We keep an internal structure + * of devices using these channels, along with additional + * information. + * + * We allocate the descriptors and allow access to them through various + * functions. The drivers allocate the data buffers and assign them + * to the descriptors. + */ +static DEFINE_SPINLOCK(au1xxx_dbdma_spin_lock); + +/* I couldn't find a macro that did this... */ +#define ALIGN_ADDR(x, a) ((((u32)(x)) + (a-1)) & ~(a-1)) + +static dbdma_global_t *dbdma_gptr = (dbdma_global_t *)DDMA_GLOBAL_BASE; +static int dbdma_initialized; +static void au1xxx_dbdma_init(void); + +static dbdev_tab_t dbdev_tab[] = { +#ifdef CONFIG_SOC_AU1550 + /* UARTS */ + { DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8, 0x11100004, 0, 0 }, + { DSCR_CMD0_UART0_RX, DEV_FLAGS_IN, 0, 8, 0x11100000, 0, 0 }, + { DSCR_CMD0_UART3_TX, DEV_FLAGS_OUT, 0, 8, 0x11400004, 0, 0 }, + { DSCR_CMD0_UART3_RX, DEV_FLAGS_IN, 0, 8, 0x11400000, 0, 0 }, + + /* EXT DMA */ + { DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 }, + { DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 }, + { DSCR_CMD0_DMA_REQ2, 0, 0, 0, 0x00000000, 0, 0 }, + { DSCR_CMD0_DMA_REQ3, 0, 0, 0, 0x00000000, 0, 0 }, + + /* USB DEV */ + { DSCR_CMD0_USBDEV_RX0, DEV_FLAGS_IN, 4, 8, 0x10200000, 0, 0 }, + { DSCR_CMD0_USBDEV_TX0, DEV_FLAGS_OUT, 4, 8, 0x10200004, 0, 0 }, + { DSCR_CMD0_USBDEV_TX1, DEV_FLAGS_OUT, 4, 8, 0x10200008, 0, 0 }, + { DSCR_CMD0_USBDEV_TX2, DEV_FLAGS_OUT, 4, 8, 0x1020000c, 0, 0 }, + { DSCR_CMD0_USBDEV_RX3, DEV_FLAGS_IN, 4, 8, 0x10200010, 0, 0 }, + { DSCR_CMD0_USBDEV_RX4, DEV_FLAGS_IN, 4, 8, 0x10200014, 0, 0 }, + + /* PSC 0 */ + { DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 0, 0x11a0001c, 0, 0 }, + { DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 0, 0x11a0001c, 0, 0 }, + + /* PSC 1 */ + { DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 0, 0x11b0001c, 0, 0 }, + { DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 0, 0x11b0001c, 0, 0 }, + + /* PSC 2 */ + { DSCR_CMD0_PSC2_TX, DEV_FLAGS_OUT, 0, 0, 0x10a0001c, 0, 0 }, + { DSCR_CMD0_PSC2_RX, DEV_FLAGS_IN, 0, 0, 0x10a0001c, 0, 0 }, + + /* PSC 3 */ + { DSCR_CMD0_PSC3_TX, DEV_FLAGS_OUT, 0, 0, 0x10b0001c, 0, 0 }, + { DSCR_CMD0_PSC3_RX, DEV_FLAGS_IN, 0, 0, 0x10b0001c, 0, 0 }, + + { DSCR_CMD0_PCI_WRITE, 0, 0, 0, 0x00000000, 0, 0 }, /* PCI */ + { DSCR_CMD0_NAND_FLASH, 0, 0, 0, 0x00000000, 0, 0 }, /* NAND */ + + /* MAC 0 */ + { DSCR_CMD0_MAC0_RX, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, + { DSCR_CMD0_MAC0_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 }, + + /* MAC 1 */ + { DSCR_CMD0_MAC1_RX, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, + { DSCR_CMD0_MAC1_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 }, + +#endif /* CONFIG_SOC_AU1550 */ + +#ifdef CONFIG_SOC_AU1200 + { DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8, 0x11100004, 0, 0 }, + { DSCR_CMD0_UART0_RX, DEV_FLAGS_IN, 0, 8, 0x11100000, 0, 0 }, + { DSCR_CMD0_UART1_TX, DEV_FLAGS_OUT, 0, 8, 0x11200004, 0, 0 }, + { DSCR_CMD0_UART1_RX, DEV_FLAGS_IN, 0, 8, 0x11200000, 0, 0 }, + + { DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 }, + { DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 }, + + { DSCR_CMD0_MAE_BE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, + { DSCR_CMD0_MAE_FE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, + { DSCR_CMD0_MAE_BOTH, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, + { DSCR_CMD0_LCD, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, + + { DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 4, 8, 0x10600000, 0, 0 }, + { DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN, 4, 8, 0x10600004, 0, 0 }, + { DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 4, 8, 0x10680000, 0, 0 }, + { DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN, 4, 8, 0x10680004, 0, 0 }, + + { DSCR_CMD0_AES_RX, DEV_FLAGS_IN , 4, 32, 0x10300008, 0, 0 }, + { DSCR_CMD0_AES_TX, DEV_FLAGS_OUT, 4, 32, 0x10300004, 0, 0 }, + + { DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 16, 0x11a0001c, 0, 0 }, + { DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 16, 0x11a0001c, 0, 0 }, + { DSCR_CMD0_PSC0_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, + + { DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 16, 0x11b0001c, 0, 0 }, + { DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 16, 0x11b0001c, 0, 0 }, + { DSCR_CMD0_PSC1_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, + + { DSCR_CMD0_CIM_RXA, DEV_FLAGS_IN, 0, 32, 0x14004020, 0, 0 }, + { DSCR_CMD0_CIM_RXB, DEV_FLAGS_IN, 0, 32, 0x14004040, 0, 0 }, + { DSCR_CMD0_CIM_RXC, DEV_FLAGS_IN, 0, 32, 0x14004060, 0, 0 }, + { DSCR_CMD0_CIM_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, + + { DSCR_CMD0_NAND_FLASH, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, + +#endif /* CONFIG_SOC_AU1200 */ + + { DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, + { DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, + + /* Provide 16 user definable device types */ + { ~0, 0, 0, 0, 0, 0, 0 }, + { ~0, 0, 0, 0, 0, 0, 0 }, + { ~0, 0, 0, 0, 0, 0, 0 }, + { ~0, 0, 0, 0, 0, 0, 0 }, + { ~0, 0, 0, 0, 0, 0, 0 }, + { ~0, 0, 0, 0, 0, 0, 0 }, + { ~0, 0, 0, 0, 0, 0, 0 }, + { ~0, 0, 0, 0, 0, 0, 0 }, + { ~0, 0, 0, 0, 0, 0, 0 }, + { ~0, 0, 0, 0, 0, 0, 0 }, + { ~0, 0, 0, 0, 0, 0, 0 }, + { ~0, 0, 0, 0, 0, 0, 0 }, + { ~0, 0, 0, 0, 0, 0, 0 }, + { ~0, 0, 0, 0, 0, 0, 0 }, + { ~0, 0, 0, 0, 0, 0, 0 }, + { ~0, 0, 0, 0, 0, 0, 0 }, +}; + +#define DBDEV_TAB_SIZE ARRAY_SIZE(dbdev_tab) + +static chan_tab_t *chan_tab_ptr[NUM_DBDMA_CHANS]; + +static dbdev_tab_t *find_dbdev_id(u32 id) +{ + int i; + dbdev_tab_t *p; + for (i = 0; i < DBDEV_TAB_SIZE; ++i) { + p = &dbdev_tab[i]; + if (p->dev_id == id) + return p; + } + return NULL; +} + +void *au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp) +{ + return phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); +} +EXPORT_SYMBOL(au1xxx_ddma_get_nextptr_virt); + +u32 au1xxx_ddma_add_device(dbdev_tab_t *dev) +{ + u32 ret = 0; + dbdev_tab_t *p; + static u16 new_id = 0x1000; + + p = find_dbdev_id(~0); + if (NULL != p) { + memcpy(p, dev, sizeof(dbdev_tab_t)); + p->dev_id = DSCR_DEV2CUSTOM_ID(new_id, dev->dev_id); + ret = p->dev_id; + new_id++; +#if 0 + printk(KERN_DEBUG "add_device: id:%x flags:%x padd:%x\n", + p->dev_id, p->dev_flags, p->dev_physaddr); +#endif + } + + return ret; +} +EXPORT_SYMBOL(au1xxx_ddma_add_device); + +void au1xxx_ddma_del_device(u32 devid) +{ + dbdev_tab_t *p = find_dbdev_id(devid); + + if (p != NULL) { + memset(p, 0, sizeof(dbdev_tab_t)); + p->dev_id = ~0; + } +} +EXPORT_SYMBOL(au1xxx_ddma_del_device); + +/* Allocate a channel and return a non-zero descriptor if successful. */ +u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid, + void (*callback)(int, void *), void *callparam) +{ + unsigned long flags; + u32 used, chan, rv; + u32 dcp; + int i; + dbdev_tab_t *stp, *dtp; + chan_tab_t *ctp; + au1x_dma_chan_t *cp; + + /* + * We do the intialization on the first channel allocation. + * We have to wait because of the interrupt handler initialization + * which can't be done successfully during board set up. + */ + if (!dbdma_initialized) + au1xxx_dbdma_init(); + dbdma_initialized = 1; + + stp = find_dbdev_id(srcid); + if (stp == NULL) + return 0; + dtp = find_dbdev_id(destid); + if (dtp == NULL) + return 0; + + used = 0; + rv = 0; + + /* Check to see if we can get both channels. */ + spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags); + if (!(stp->dev_flags & DEV_FLAGS_INUSE) || + (stp->dev_flags & DEV_FLAGS_ANYUSE)) { + /* Got source */ + stp->dev_flags |= DEV_FLAGS_INUSE; + if (!(dtp->dev_flags & DEV_FLAGS_INUSE) || + (dtp->dev_flags & DEV_FLAGS_ANYUSE)) { + /* Got destination */ + dtp->dev_flags |= DEV_FLAGS_INUSE; + } else { + /* Can't get dest. Release src. */ + stp->dev_flags &= ~DEV_FLAGS_INUSE; + used++; + } + } else + used++; + spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags); + + if (!used) { + /* Let's see if we can allocate a channel for it. */ + ctp = NULL; + chan = 0; + spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags); + for (i = 0; i < NUM_DBDMA_CHANS; i++) + if (chan_tab_ptr[i] == NULL) { + /* + * If kmalloc fails, it is caught below same + * as a channel not available. + */ + ctp = kmalloc(sizeof(chan_tab_t), GFP_ATOMIC); + chan_tab_ptr[i] = ctp; + break; + } + spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags); + + if (ctp != NULL) { + memset(ctp, 0, sizeof(chan_tab_t)); + ctp->chan_index = chan = i; + dcp = DDMA_CHANNEL_BASE; + dcp += (0x0100 * chan); + ctp->chan_ptr = (au1x_dma_chan_t *)dcp; + cp = (au1x_dma_chan_t *)dcp; + ctp->chan_src = stp; + ctp->chan_dest = dtp; + ctp->chan_callback = callback; + ctp->chan_callparam = callparam; + + /* Initialize channel configuration. */ + i = 0; + if (stp->dev_intlevel) + i |= DDMA_CFG_SED; + if (stp->dev_intpolarity) + i |= DDMA_CFG_SP; + if (dtp->dev_intlevel) + i |= DDMA_CFG_DED; + if (dtp->dev_intpolarity) + i |= DDMA_CFG_DP; + if ((stp->dev_flags & DEV_FLAGS_SYNC) || + (dtp->dev_flags & DEV_FLAGS_SYNC)) + i |= DDMA_CFG_SYNC; + cp->ddma_cfg = i; + au_sync(); + + /* Return a non-zero value that can be used to + * find the channel information in subsequent + * operations. + */ + rv = (u32)(&chan_tab_ptr[chan]); + } else { + /* Release devices */ + stp->dev_flags &= ~DEV_FLAGS_INUSE; + dtp->dev_flags &= ~DEV_FLAGS_INUSE; + } + } + return rv; +} +EXPORT_SYMBOL(au1xxx_dbdma_chan_alloc); + +/* + * Set the device width if source or destination is a FIFO. + * Should be 8, 16, or 32 bits. + */ +u32 au1xxx_dbdma_set_devwidth(u32 chanid, int bits) +{ + u32 rv; + chan_tab_t *ctp; + dbdev_tab_t *stp, *dtp; + + ctp = *((chan_tab_t **)chanid); + stp = ctp->chan_src; + dtp = ctp->chan_dest; + rv = 0; + + if (stp->dev_flags & DEV_FLAGS_IN) { /* Source in fifo */ + rv = stp->dev_devwidth; + stp->dev_devwidth = bits; + } + if (dtp->dev_flags & DEV_FLAGS_OUT) { /* Destination out fifo */ + rv = dtp->dev_devwidth; + dtp->dev_devwidth = bits; + } + + return rv; +} +EXPORT_SYMBOL(au1xxx_dbdma_set_devwidth); + +/* Allocate a descriptor ring, initializing as much as possible. */ +u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries) +{ + int i; + u32 desc_base, srcid, destid; + u32 cmd0, cmd1, src1, dest1; + u32 src0, dest0; + chan_tab_t *ctp; + dbdev_tab_t *stp, *dtp; + au1x_ddma_desc_t *dp; + + /* + * I guess we could check this to be within the + * range of the table...... + */ + ctp = *((chan_tab_t **)chanid); + stp = ctp->chan_src; + dtp = ctp->chan_dest; + + /* + * The descriptors must be 32-byte aligned. There is a + * possibility the allocation will give us such an address, + * and if we try that first we are likely to not waste larger + * slabs of memory. + */ + desc_base = (u32)kmalloc(entries * sizeof(au1x_ddma_desc_t), + GFP_KERNEL|GFP_DMA); + if (desc_base == 0) + return 0; + + if (desc_base & 0x1f) { + /* + * Lost....do it again, allocate extra, and round + * the address base. + */ + kfree((const void *)desc_base); + i = entries * sizeof(au1x_ddma_desc_t); + i += (sizeof(au1x_ddma_desc_t) - 1); + desc_base = (u32)kmalloc(i, GFP_KERNEL|GFP_DMA); + if (desc_base == 0) + return 0; + + desc_base = ALIGN_ADDR(desc_base, sizeof(au1x_ddma_desc_t)); + } + dp = (au1x_ddma_desc_t *)desc_base; + + /* Keep track of the base descriptor. */ + ctp->chan_desc_base = dp; + + /* Initialize the rings with as much information as we know. */ + srcid = stp->dev_id; + destid = dtp->dev_id; + + cmd0 = cmd1 = src1 = dest1 = 0; + src0 = dest0 = 0; + + cmd0 |= DSCR_CMD0_SID(srcid); + cmd0 |= DSCR_CMD0_DID(destid); + cmd0 |= DSCR_CMD0_IE | DSCR_CMD0_CV; + cmd0 |= DSCR_CMD0_ST(DSCR_CMD0_ST_NOCHANGE); + + /* Is it mem to mem transfer? */ + if (((DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_THROTTLE) || + (DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_ALWAYS)) && + ((DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_THROTTLE) || + (DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_ALWAYS))) + cmd0 |= DSCR_CMD0_MEM; + + switch (stp->dev_devwidth) { + case 8: + cmd0 |= DSCR_CMD0_SW(DSCR_CMD0_BYTE); + break; + case 16: + cmd0 |= DSCR_CMD0_SW(DSCR_CMD0_HALFWORD); + break; + case 32: + default: + cmd0 |= DSCR_CMD0_SW(DSCR_CMD0_WORD); + break; + } + + switch (dtp->dev_devwidth) { + case 8: + cmd0 |= DSCR_CMD0_DW(DSCR_CMD0_BYTE); + break; + case 16: + cmd0 |= DSCR_CMD0_DW(DSCR_CMD0_HALFWORD); + break; + case 32: + default: + cmd0 |= DSCR_CMD0_DW(DSCR_CMD0_WORD); + break; + } + + /* + * If the device is marked as an in/out FIFO, ensure it is + * set non-coherent. + */ + if (stp->dev_flags & DEV_FLAGS_IN) + cmd0 |= DSCR_CMD0_SN; /* Source in FIFO */ + if (dtp->dev_flags & DEV_FLAGS_OUT) + cmd0 |= DSCR_CMD0_DN; /* Destination out FIFO */ + + /* + * Set up source1. For now, assume no stride and increment. + * A channel attribute update can change this later. + */ + switch (stp->dev_tsize) { + case 1: + src1 |= DSCR_SRC1_STS(DSCR_xTS_SIZE1); + break; + case 2: + src1 |= DSCR_SRC1_STS(DSCR_xTS_SIZE2); + break; + case 4: + src1 |= DSCR_SRC1_STS(DSCR_xTS_SIZE4); + break; + case 8: + default: + src1 |= DSCR_SRC1_STS(DSCR_xTS_SIZE8); + break; + } + + /* If source input is FIFO, set static address. */ + if (stp->dev_flags & DEV_FLAGS_IN) { + if (stp->dev_flags & DEV_FLAGS_BURSTABLE) + src1 |= DSCR_SRC1_SAM(DSCR_xAM_BURST); + else + src1 |= DSCR_SRC1_SAM(DSCR_xAM_STATIC); + } + + if (stp->dev_physaddr) + src0 = stp->dev_physaddr; + + /* + * Set up dest1. For now, assume no stride and increment. + * A channel attribute update can change this later. + */ + switch (dtp->dev_tsize) { + case 1: + dest1 |= DSCR_DEST1_DTS(DSCR_xTS_SIZE1); + break; + case 2: + dest1 |= DSCR_DEST1_DTS(DSCR_xTS_SIZE2); + break; + case 4: + dest1 |= DSCR_DEST1_DTS(DSCR_xTS_SIZE4); + break; + case 8: + default: + dest1 |= DSCR_DEST1_DTS(DSCR_xTS_SIZE8); + break; + } + + /* If destination output is FIFO, set static address. */ + if (dtp->dev_flags & DEV_FLAGS_OUT) { + if (dtp->dev_flags & DEV_FLAGS_BURSTABLE) + dest1 |= DSCR_DEST1_DAM(DSCR_xAM_BURST); + else + dest1 |= DSCR_DEST1_DAM(DSCR_xAM_STATIC); + } + + if (dtp->dev_physaddr) + dest0 = dtp->dev_physaddr; + +#if 0 + printk(KERN_DEBUG "did:%x sid:%x cmd0:%x cmd1:%x source0:%x " + "source1:%x dest0:%x dest1:%x\n", + dtp->dev_id, stp->dev_id, cmd0, cmd1, src0, + src1, dest0, dest1); +#endif + for (i = 0; i < entries; i++) { + dp->dscr_cmd0 = cmd0; + dp->dscr_cmd1 = cmd1; + dp->dscr_source0 = src0; + dp->dscr_source1 = src1; + dp->dscr_dest0 = dest0; + dp->dscr_dest1 = dest1; + dp->dscr_stat = 0; + dp->sw_context = 0; + dp->sw_status = 0; + dp->dscr_nxtptr = DSCR_NXTPTR(virt_to_phys(dp + 1)); + dp++; + } + + /* Make last descrptor point to the first. */ + dp--; + dp->dscr_nxtptr = DSCR_NXTPTR(virt_to_phys(ctp->chan_desc_base)); + ctp->get_ptr = ctp->put_ptr = ctp->cur_ptr = ctp->chan_desc_base; + + return (u32)ctp->chan_desc_base; +} +EXPORT_SYMBOL(au1xxx_dbdma_ring_alloc); + +/* + * Put a source buffer into the DMA ring. + * This updates the source pointer and byte count. Normally used + * for memory to fifo transfers. + */ +u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags) +{ + chan_tab_t *ctp; + au1x_ddma_desc_t *dp; + + /* + * I guess we could check this to be within the + * range of the table...... + */ + ctp = *(chan_tab_t **)chanid; + + /* + * We should have multiple callers for a particular channel, + * an interrupt doesn't affect this pointer nor the descriptor, + * so no locking should be needed. + */ + dp = ctp->put_ptr; + + /* + * If the descriptor is valid, we are way ahead of the DMA + * engine, so just return an error condition. + */ + if (dp->dscr_cmd0 & DSCR_CMD0_V) + return 0; + + /* Load up buffer address and byte count. */ + dp->dscr_source0 = virt_to_phys(buf); + dp->dscr_cmd1 = nbytes; + /* Check flags */ + if (flags & DDMA_FLAGS_IE) + dp->dscr_cmd0 |= DSCR_CMD0_IE; + if (flags & DDMA_FLAGS_NOIE) + dp->dscr_cmd0 &= ~DSCR_CMD0_IE; + + /* + * There is an errata on the Au1200/Au1550 parts that could result + * in "stale" data being DMA'ed. It has to do with the snoop logic on + * the cache eviction buffer. DMA_NONCOHERENT is on by default for + * these parts. If it is fixed in the future, these dma_cache_inv will + * just be nothing more than empty macros. See io.h. + */ + dma_cache_wback_inv((unsigned long)buf, nbytes); + dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */ + au_sync(); + dma_cache_wback_inv((unsigned long)dp, sizeof(dp)); + ctp->chan_ptr->ddma_dbell = 0; + + /* Get next descriptor pointer. */ + ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); + + /* Return something non-zero. */ + return nbytes; +} +EXPORT_SYMBOL(_au1xxx_dbdma_put_source); + +/* Put a destination buffer into the DMA ring. + * This updates the destination pointer and byte count. Normally used + * to place an empty buffer into the ring for fifo to memory transfers. + */ +u32 +_au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags) +{ + chan_tab_t *ctp; + au1x_ddma_desc_t *dp; + + /* I guess we could check this to be within the + * range of the table...... + */ + ctp = *((chan_tab_t **)chanid); + + /* We should have multiple callers for a particular channel, + * an interrupt doesn't affect this pointer nor the descriptor, + * so no locking should be needed. + */ + dp = ctp->put_ptr; + + /* If the descriptor is valid, we are way ahead of the DMA + * engine, so just return an error condition. + */ + if (dp->dscr_cmd0 & DSCR_CMD0_V) + return 0; + + /* Load up buffer address and byte count */ + + /* Check flags */ + if (flags & DDMA_FLAGS_IE) + dp->dscr_cmd0 |= DSCR_CMD0_IE; + if (flags & DDMA_FLAGS_NOIE) + dp->dscr_cmd0 &= ~DSCR_CMD0_IE; + + dp->dscr_dest0 = virt_to_phys(buf); + dp->dscr_cmd1 = nbytes; +#if 0 + printk(KERN_DEBUG "cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n", + dp->dscr_cmd0, dp->dscr_cmd1, dp->dscr_source0, + dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1); +#endif + /* + * There is an errata on the Au1200/Au1550 parts that could result in + * "stale" data being DMA'ed. It has to do with the snoop logic on the + * cache eviction buffer. DMA_NONCOHERENT is on by default for these + * parts. If it is fixed in the future, these dma_cache_inv will just + * be nothing more than empty macros. See io.h. + */ + dma_cache_inv((unsigned long)buf, nbytes); + dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */ + au_sync(); + dma_cache_wback_inv((unsigned long)dp, sizeof(dp)); + ctp->chan_ptr->ddma_dbell = 0; + + /* Get next descriptor pointer. */ + ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); + + /* Return something non-zero. */ + return nbytes; +} +EXPORT_SYMBOL(_au1xxx_dbdma_put_dest); + +/* + * Get a destination buffer into the DMA ring. + * Normally used to get a full buffer from the ring during fifo + * to memory transfers. This does not set the valid bit, you will + * have to put another destination buffer to keep the DMA going. + */ +u32 au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes) +{ + chan_tab_t *ctp; + au1x_ddma_desc_t *dp; + u32 rv; + + /* + * I guess we could check this to be within the + * range of the table...... + */ + ctp = *((chan_tab_t **)chanid); + + /* + * We should have multiple callers for a particular channel, + * an interrupt doesn't affect this pointer nor the descriptor, + * so no locking should be needed. + */ + dp = ctp->get_ptr; + + /* + * If the descriptor is valid, we are way ahead of the DMA + * engine, so just return an error condition. + */ + if (dp->dscr_cmd0 & DSCR_CMD0_V) + return 0; + + /* Return buffer address and byte count. */ + *buf = (void *)(phys_to_virt(dp->dscr_dest0)); + *nbytes = dp->dscr_cmd1; + rv = dp->dscr_stat; + + /* Get next descriptor pointer. */ + ctp->get_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); + + /* Return something non-zero. */ + return rv; +} +EXPORT_SYMBOL_GPL(au1xxx_dbdma_get_dest); + +void au1xxx_dbdma_stop(u32 chanid) +{ + chan_tab_t *ctp; + au1x_dma_chan_t *cp; + int halt_timeout = 0; + + ctp = *((chan_tab_t **)chanid); + + cp = ctp->chan_ptr; + cp->ddma_cfg &= ~DDMA_CFG_EN; /* Disable channel */ + au_sync(); + while (!(cp->ddma_stat & DDMA_STAT_H)) { + udelay(1); + halt_timeout++; + if (halt_timeout > 100) { + printk(KERN_WARNING "warning: DMA channel won't halt\n"); + break; + } + } + /* clear current desc valid and doorbell */ + cp->ddma_stat |= (DDMA_STAT_DB | DDMA_STAT_V); + au_sync(); +} +EXPORT_SYMBOL(au1xxx_dbdma_stop); + +/* + * Start using the current descriptor pointer. If the DBDMA encounters + * a non-valid descriptor, it will stop. In this case, we can just + * continue by adding a buffer to the list and starting again. + */ +void au1xxx_dbdma_start(u32 chanid) +{ + chan_tab_t *ctp; + au1x_dma_chan_t *cp; + + ctp = *((chan_tab_t **)chanid); + cp = ctp->chan_ptr; + cp->ddma_desptr = virt_to_phys(ctp->cur_ptr); + cp->ddma_cfg |= DDMA_CFG_EN; /* Enable channel */ + au_sync(); + cp->ddma_dbell = 0; + au_sync(); +} +EXPORT_SYMBOL(au1xxx_dbdma_start); + +void au1xxx_dbdma_reset(u32 chanid) +{ + chan_tab_t *ctp; + au1x_ddma_desc_t *dp; + + au1xxx_dbdma_stop(chanid); + + ctp = *((chan_tab_t **)chanid); + ctp->get_ptr = ctp->put_ptr = ctp->cur_ptr = ctp->chan_desc_base; + + /* Run through the descriptors and reset the valid indicator. */ + dp = ctp->chan_desc_base; + + do { + dp->dscr_cmd0 &= ~DSCR_CMD0_V; + /* + * Reset our software status -- this is used to determine + * if a descriptor is in use by upper level software. Since + * posting can reset 'V' bit. + */ + dp->sw_status = 0; + dp = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); + } while (dp != ctp->chan_desc_base); +} +EXPORT_SYMBOL(au1xxx_dbdma_reset); + +u32 au1xxx_get_dma_residue(u32 chanid) +{ + chan_tab_t *ctp; + au1x_dma_chan_t *cp; + u32 rv; + + ctp = *((chan_tab_t **)chanid); + cp = ctp->chan_ptr; + + /* This is only valid if the channel is stopped. */ + rv = cp->ddma_bytecnt; + au_sync(); + + return rv; +} +EXPORT_SYMBOL_GPL(au1xxx_get_dma_residue); + +void au1xxx_dbdma_chan_free(u32 chanid) +{ + chan_tab_t *ctp; + dbdev_tab_t *stp, *dtp; + + ctp = *((chan_tab_t **)chanid); + stp = ctp->chan_src; + dtp = ctp->chan_dest; + + au1xxx_dbdma_stop(chanid); + + kfree((void *)ctp->chan_desc_base); + + stp->dev_flags &= ~DEV_FLAGS_INUSE; + dtp->dev_flags &= ~DEV_FLAGS_INUSE; + chan_tab_ptr[ctp->chan_index] = NULL; + + kfree(ctp); +} +EXPORT_SYMBOL(au1xxx_dbdma_chan_free); + +static irqreturn_t dbdma_interrupt(int irq, void *dev_id) +{ + u32 intstat; + u32 chan_index; + chan_tab_t *ctp; + au1x_ddma_desc_t *dp; + au1x_dma_chan_t *cp; + + intstat = dbdma_gptr->ddma_intstat; + au_sync(); + chan_index = __ffs(intstat); + + ctp = chan_tab_ptr[chan_index]; + cp = ctp->chan_ptr; + dp = ctp->cur_ptr; + + /* Reset interrupt. */ + cp->ddma_irq = 0; + au_sync(); + + if (ctp->chan_callback) + ctp->chan_callback(irq, ctp->chan_callparam); + + ctp->cur_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); + return IRQ_RETVAL(1); +} + +static void au1xxx_dbdma_init(void) +{ + int irq_nr; + + dbdma_gptr->ddma_config = 0; + dbdma_gptr->ddma_throttle = 0; + dbdma_gptr->ddma_inten = 0xffff; + au_sync(); + +#if defined(CONFIG_SOC_AU1550) + irq_nr = AU1550_DDMA_INT; +#elif defined(CONFIG_SOC_AU1200) + irq_nr = AU1200_DDMA_INT; +#else + #error Unknown Au1x00 SOC +#endif + + if (request_irq(irq_nr, dbdma_interrupt, IRQF_DISABLED, + "Au1xxx dbdma", (void *)dbdma_gptr)) + printk(KERN_ERR "Can't get 1550 dbdma irq"); +} + +void au1xxx_dbdma_dump(u32 chanid) +{ + chan_tab_t *ctp; + au1x_ddma_desc_t *dp; + dbdev_tab_t *stp, *dtp; + au1x_dma_chan_t *cp; + u32 i = 0; + + ctp = *((chan_tab_t **)chanid); + stp = ctp->chan_src; + dtp = ctp->chan_dest; + cp = ctp->chan_ptr; + + printk(KERN_DEBUG "Chan %x, stp %x (dev %d) dtp %x (dev %d) \n", + (u32)ctp, (u32)stp, stp - dbdev_tab, (u32)dtp, + dtp - dbdev_tab); + printk(KERN_DEBUG "desc base %x, get %x, put %x, cur %x\n", + (u32)(ctp->chan_desc_base), (u32)(ctp->get_ptr), + (u32)(ctp->put_ptr), (u32)(ctp->cur_ptr)); + + printk(KERN_DEBUG "dbdma chan %x\n", (u32)cp); + printk(KERN_DEBUG "cfg %08x, desptr %08x, statptr %08x\n", + cp->ddma_cfg, cp->ddma_desptr, cp->ddma_statptr); + printk(KERN_DEBUG "dbell %08x, irq %08x, stat %08x, bytecnt %08x\n", + cp->ddma_dbell, cp->ddma_irq, cp->ddma_stat, + cp->ddma_bytecnt); + + /* Run through the descriptors */ + dp = ctp->chan_desc_base; + + do { + printk(KERN_DEBUG "Dp[%d]= %08x, cmd0 %08x, cmd1 %08x\n", + i++, (u32)dp, dp->dscr_cmd0, dp->dscr_cmd1); + printk(KERN_DEBUG "src0 %08x, src1 %08x, dest0 %08x, dest1 %08x\n", + dp->dscr_source0, dp->dscr_source1, + dp->dscr_dest0, dp->dscr_dest1); + printk(KERN_DEBUG "stat %08x, nxtptr %08x\n", + dp->dscr_stat, dp->dscr_nxtptr); + dp = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); + } while (dp != ctp->chan_desc_base); +} + +/* Put a descriptor into the DMA ring. + * This updates the source/destination pointers and byte count. + */ +u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr) +{ + chan_tab_t *ctp; + au1x_ddma_desc_t *dp; + u32 nbytes = 0; + + /* + * I guess we could check this to be within the + * range of the table...... + */ + ctp = *((chan_tab_t **)chanid); + + /* + * We should have multiple callers for a particular channel, + * an interrupt doesn't affect this pointer nor the descriptor, + * so no locking should be needed. + */ + dp = ctp->put_ptr; + + /* + * If the descriptor is valid, we are way ahead of the DMA + * engine, so just return an error condition. + */ + if (dp->dscr_cmd0 & DSCR_CMD0_V) + return 0; + + /* Load up buffer addresses and byte count. */ + dp->dscr_dest0 = dscr->dscr_dest0; + dp->dscr_source0 = dscr->dscr_source0; + dp->dscr_dest1 = dscr->dscr_dest1; + dp->dscr_source1 = dscr->dscr_source1; + dp->dscr_cmd1 = dscr->dscr_cmd1; + nbytes = dscr->dscr_cmd1; + /* Allow the caller to specifiy if an interrupt is generated */ + dp->dscr_cmd0 &= ~DSCR_CMD0_IE; + dp->dscr_cmd0 |= dscr->dscr_cmd0 | DSCR_CMD0_V; + ctp->chan_ptr->ddma_dbell = 0; + + /* Get next descriptor pointer. */ + ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); + + /* Return something non-zero. */ + return nbytes; +} + +#endif /* defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) */ diff --git a/arch/mips/alchemy/common/dma.c b/arch/mips/alchemy/common/dma.c new file mode 100644 index 0000000..d6fbda2 --- /dev/null +++ b/arch/mips/alchemy/common/dma.c @@ -0,0 +1,238 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * A DMA channel allocator for Au1x00. API is modeled loosely off of + * linux/kernel/dma.c. + * + * Copyright 2000, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> + * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> + +#include <asm/mach-au1x00/au1000.h> +#include <asm/mach-au1x00/au1000_dma.h> + +#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || \ + defined(CONFIG_SOC_AU1100) +/* + * A note on resource allocation: + * + * All drivers needing DMA channels, should allocate and release them + * through the public routines `request_dma()' and `free_dma()'. + * + * In order to avoid problems, all processes should allocate resources in + * the same sequence and release them in the reverse order. + * + * So, when allocating DMAs and IRQs, first allocate the DMA, then the IRQ. + * When releasing them, first release the IRQ, then release the DMA. The + * main reason for this order is that, if you are requesting the DMA buffer + * done interrupt, you won't know the irq number until the DMA channel is + * returned from request_dma. + */ + +DEFINE_SPINLOCK(au1000_dma_spin_lock); + +struct dma_chan au1000_dma_table[NUM_AU1000_DMA_CHANNELS] = { + {.dev_id = -1,}, + {.dev_id = -1,}, + {.dev_id = -1,}, + {.dev_id = -1,}, + {.dev_id = -1,}, + {.dev_id = -1,}, + {.dev_id = -1,}, + {.dev_id = -1,} +}; +EXPORT_SYMBOL(au1000_dma_table); + +/* Device FIFO addresses and default DMA modes */ +static const struct dma_dev { + unsigned int fifo_addr; + unsigned int dma_mode; +} dma_dev_table[DMA_NUM_DEV] = { + {UART0_ADDR + UART_TX, 0}, + {UART0_ADDR + UART_RX, 0}, + {0, 0}, + {0, 0}, + {AC97C_DATA, DMA_DW16 }, /* coherent */ + {AC97C_DATA, DMA_DR | DMA_DW16 }, /* coherent */ + {UART3_ADDR + UART_TX, DMA_DW8 | DMA_NC}, + {UART3_ADDR + UART_RX, DMA_DR | DMA_DW8 | DMA_NC}, + {USBD_EP0RD, DMA_DR | DMA_DW8 | DMA_NC}, + {USBD_EP0WR, DMA_DW8 | DMA_NC}, + {USBD_EP2WR, DMA_DW8 | DMA_NC}, + {USBD_EP3WR, DMA_DW8 | DMA_NC}, + {USBD_EP4RD, DMA_DR | DMA_DW8 | DMA_NC}, + {USBD_EP5RD, DMA_DR | DMA_DW8 | DMA_NC}, + {I2S_DATA, DMA_DW32 | DMA_NC}, + {I2S_DATA, DMA_DR | DMA_DW32 | DMA_NC} +}; + +int au1000_dma_read_proc(char *buf, char **start, off_t fpos, + int length, int *eof, void *data) +{ + int i, len = 0; + struct dma_chan *chan; + + for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++) { + chan = get_dma_chan(i); + if (chan != NULL) + len += sprintf(buf + len, "%2d: %s\n", + i, chan->dev_str); + } + + if (fpos >= len) { + *start = buf; + *eof = 1; + return 0; + } + *start = buf + fpos; + len -= fpos; + if (len > length) + return length; + *eof = 1; + return len; +} + +/* Device FIFO addresses and default DMA modes - 2nd bank */ +static const struct dma_dev dma_dev_table_bank2[DMA_NUM_DEV_BANK2] = { + { SD0_XMIT_FIFO, DMA_DS | DMA_DW8 }, /* coherent */ + { SD0_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8 }, /* coherent */ + { SD1_XMIT_FIFO, DMA_DS | DMA_DW8 }, /* coherent */ + { SD1_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8 } /* coherent */ +}; + +void dump_au1000_dma_channel(unsigned int dmanr) +{ + struct dma_chan *chan; + + if (dmanr >= NUM_AU1000_DMA_CHANNELS) + return; + chan = &au1000_dma_table[dmanr]; + + printk(KERN_INFO "Au1000 DMA%d Register Dump:\n", dmanr); + printk(KERN_INFO " mode = 0x%08x\n", + au_readl(chan->io + DMA_MODE_SET)); + printk(KERN_INFO " addr = 0x%08x\n", + au_readl(chan->io + DMA_PERIPHERAL_ADDR)); + printk(KERN_INFO " start0 = 0x%08x\n", + au_readl(chan->io + DMA_BUFFER0_START)); + printk(KERN_INFO " start1 = 0x%08x\n", + au_readl(chan->io + DMA_BUFFER1_START)); + printk(KERN_INFO " count0 = 0x%08x\n", + au_readl(chan->io + DMA_BUFFER0_COUNT)); + printk(KERN_INFO " count1 = 0x%08x\n", + au_readl(chan->io + DMA_BUFFER1_COUNT)); +} + +/* + * Finds a free channel, and binds the requested device to it. + * Returns the allocated channel number, or negative on error. + * Requests the DMA done IRQ if irqhandler != NULL. + */ +int request_au1000_dma(int dev_id, const char *dev_str, + irq_handler_t irqhandler, + unsigned long irqflags, + void *irq_dev_id) +{ + struct dma_chan *chan; + const struct dma_dev *dev; + int i, ret; + +#if defined(CONFIG_SOC_AU1100) + if (dev_id < 0 || dev_id >= (DMA_NUM_DEV + DMA_NUM_DEV_BANK2)) + return -EINVAL; +#else + if (dev_id < 0 || dev_id >= DMA_NUM_DEV) + return -EINVAL; +#endif + + for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++) + if (au1000_dma_table[i].dev_id < 0) + break; + + if (i == NUM_AU1000_DMA_CHANNELS) + return -ENODEV; + + chan = &au1000_dma_table[i]; + + if (dev_id >= DMA_NUM_DEV) { + dev_id -= DMA_NUM_DEV; + dev = &dma_dev_table_bank2[dev_id]; + } else + dev = &dma_dev_table[dev_id]; + + if (irqhandler) { + chan->irq = AU1000_DMA_INT_BASE + i; + chan->irq_dev = irq_dev_id; + ret = request_irq(chan->irq, irqhandler, irqflags, dev_str, + chan->irq_dev); + if (ret) { + chan->irq = 0; + chan->irq_dev = NULL; + return ret; + } + } else { + chan->irq = 0; + chan->irq_dev = NULL; + } + + /* fill it in */ + chan->io = DMA_CHANNEL_BASE + i * DMA_CHANNEL_LEN; + chan->dev_id = dev_id; + chan->dev_str = dev_str; + chan->fifo_addr = dev->fifo_addr; + chan->mode = dev->dma_mode; + + /* initialize the channel before returning */ + init_dma(i); + + return i; +} +EXPORT_SYMBOL(request_au1000_dma); + +void free_au1000_dma(unsigned int dmanr) +{ + struct dma_chan *chan = get_dma_chan(dmanr); + + if (!chan) { + printk(KERN_ERR "Error trying to free DMA%d\n", dmanr); + return; + } + + disable_dma(dmanr); + if (chan->irq) + free_irq(chan->irq, chan->irq_dev); + + chan->irq = 0; + chan->irq_dev = NULL; + chan->dev_id = -1; +} +EXPORT_SYMBOL(free_au1000_dma); + +#endif /* AU1000 AU1500 AU1100 */ diff --git a/arch/mips/alchemy/common/gpio.c b/arch/mips/alchemy/common/gpio.c new file mode 100644 index 0000000..e660ddd --- /dev/null +++ b/arch/mips/alchemy/common/gpio.c @@ -0,0 +1,148 @@ +/* + * Copyright (C) 2007, OpenWrt.org, Florian Fainelli <florian@openwrt.org> + * Architecture specific GPIO support + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Notes : + * au1000 SoC have only one GPIO line : GPIO1 + * others have a second one : GPIO2 + */ + +#include <linux/module.h> + +#include <asm/mach-au1x00/au1000.h> +#include <asm/gpio.h> + +#define gpio1 sys +#if !defined(CONFIG_SOC_AU1000) + +static struct au1x00_gpio2 *const gpio2 = (struct au1x00_gpio2 *) GPIO2_BASE; +#define GPIO2_OUTPUT_ENABLE_MASK 0x00010000 + +static int au1xxx_gpio2_read(unsigned gpio) +{ + gpio -= AU1XXX_GPIO_BASE; + return ((gpio2->pinstate >> gpio) & 0x01); +} + +static void au1xxx_gpio2_write(unsigned gpio, int value) +{ + gpio -= AU1XXX_GPIO_BASE; + + gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | ((!!value) << gpio); +} + +static int au1xxx_gpio2_direction_input(unsigned gpio) +{ + gpio -= AU1XXX_GPIO_BASE; + gpio2->dir &= ~(0x01 << gpio); + return 0; +} + +static int au1xxx_gpio2_direction_output(unsigned gpio, int value) +{ + gpio -= AU1XXX_GPIO_BASE; + gpio2->dir |= 0x01 << gpio; + gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | ((!!value) << gpio); + return 0; +} + +#endif /* !defined(CONFIG_SOC_AU1000) */ + +static int au1xxx_gpio1_read(unsigned gpio) +{ + return (gpio1->pinstaterd >> gpio) & 0x01; +} + +static void au1xxx_gpio1_write(unsigned gpio, int value) +{ + if (value) + gpio1->outputset = (0x01 << gpio); + else + /* Output a zero */ + gpio1->outputclr = (0x01 << gpio); +} + +static int au1xxx_gpio1_direction_input(unsigned gpio) +{ + gpio1->pininputen = (0x01 << gpio); + return 0; +} + +static int au1xxx_gpio1_direction_output(unsigned gpio, int value) +{ + gpio1->trioutclr = (0x01 & gpio); + au1xxx_gpio1_write(gpio, value); + return 0; +} + +int au1xxx_gpio_get_value(unsigned gpio) +{ + if (gpio >= AU1XXX_GPIO_BASE) +#if defined(CONFIG_SOC_AU1000) + return 0; +#else + return au1xxx_gpio2_read(gpio); +#endif + else + return au1xxx_gpio1_read(gpio); +} +EXPORT_SYMBOL(au1xxx_gpio_get_value); + +void au1xxx_gpio_set_value(unsigned gpio, int value) +{ + if (gpio >= AU1XXX_GPIO_BASE) +#if defined(CONFIG_SOC_AU1000) + ; +#else + au1xxx_gpio2_write(gpio, value); +#endif + else + au1xxx_gpio1_write(gpio, value); +} +EXPORT_SYMBOL(au1xxx_gpio_set_value); + +int au1xxx_gpio_direction_input(unsigned gpio) +{ + if (gpio >= AU1XXX_GPIO_BASE) +#if defined(CONFIG_SOC_AU1000) + return -ENODEV; +#else + return au1xxx_gpio2_direction_input(gpio); +#endif + + return au1xxx_gpio1_direction_input(gpio); +} +EXPORT_SYMBOL(au1xxx_gpio_direction_input); + +int au1xxx_gpio_direction_output(unsigned gpio, int value) +{ + if (gpio >= AU1XXX_GPIO_BASE) +#if defined(CONFIG_SOC_AU1000) + return -ENODEV; +#else + return au1xxx_gpio2_direction_output(gpio, value); +#endif + + return au1xxx_gpio1_direction_output(gpio, value); +} +EXPORT_SYMBOL(au1xxx_gpio_direction_output); diff --git a/arch/mips/alchemy/common/irq.c b/arch/mips/alchemy/common/irq.c new file mode 100644 index 0000000..40c6cec --- /dev/null +++ b/arch/mips/alchemy/common/irq.c @@ -0,0 +1,596 @@ +/* + * Copyright 2001, 2007-2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> + * + * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include <linux/bitops.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> + +#include <asm/irq_cpu.h> +#include <asm/mipsregs.h> +#include <asm/mach-au1x00/au1000.h> +#ifdef CONFIG_MIPS_PB1000 +#include <asm/mach-pb1x00/pb1000.h> +#endif + +#define EXT_INTC0_REQ0 2 /* IP 2 */ +#define EXT_INTC0_REQ1 3 /* IP 3 */ +#define EXT_INTC1_REQ0 4 /* IP 4 */ +#define EXT_INTC1_REQ1 5 /* IP 5 */ +#define MIPS_TIMER_IP 7 /* IP 7 */ + +void (*board_init_irq)(void) __initdata = NULL; + +static DEFINE_SPINLOCK(irq_lock); + +#ifdef CONFIG_PM + +/* + * Save/restore the interrupt controller state. + * Called from the save/restore core registers as part of the + * au_sleep function in power.c.....maybe I should just pm_register() + * them instead? + */ +static unsigned int sleep_intctl_config0[2]; +static unsigned int sleep_intctl_config1[2]; +static unsigned int sleep_intctl_config2[2]; +static unsigned int sleep_intctl_src[2]; +static unsigned int sleep_intctl_assign[2]; +static unsigned int sleep_intctl_wake[2]; +static unsigned int sleep_intctl_mask[2]; + +void save_au1xxx_intctl(void) +{ + sleep_intctl_config0[0] = au_readl(IC0_CFG0RD); + sleep_intctl_config1[0] = au_readl(IC0_CFG1RD); + sleep_intctl_config2[0] = au_readl(IC0_CFG2RD); + sleep_intctl_src[0] = au_readl(IC0_SRCRD); + sleep_intctl_assign[0] = au_readl(IC0_ASSIGNRD); + sleep_intctl_wake[0] = au_readl(IC0_WAKERD); + sleep_intctl_mask[0] = au_readl(IC0_MASKRD); + + sleep_intctl_config0[1] = au_readl(IC1_CFG0RD); + sleep_intctl_config1[1] = au_readl(IC1_CFG1RD); + sleep_intctl_config2[1] = au_readl(IC1_CFG2RD); + sleep_intctl_src[1] = au_readl(IC1_SRCRD); + sleep_intctl_assign[1] = au_readl(IC1_ASSIGNRD); + sleep_intctl_wake[1] = au_readl(IC1_WAKERD); + sleep_intctl_mask[1] = au_readl(IC1_MASKRD); +} + +/* + * For most restore operations, we clear the entire register and + * then set the bits we found during the save. + */ +void restore_au1xxx_intctl(void) +{ + au_writel(0xffffffff, IC0_MASKCLR); au_sync(); + + au_writel(0xffffffff, IC0_CFG0CLR); au_sync(); + au_writel(sleep_intctl_config0[0], IC0_CFG0SET); au_sync(); + au_writel(0xffffffff, IC0_CFG1CLR); au_sync(); + au_writel(sleep_intctl_config1[0], IC0_CFG1SET); au_sync(); + au_writel(0xffffffff, IC0_CFG2CLR); au_sync(); + au_writel(sleep_intctl_config2[0], IC0_CFG2SET); au_sync(); + au_writel(0xffffffff, IC0_SRCCLR); au_sync(); + au_writel(sleep_intctl_src[0], IC0_SRCSET); au_sync(); + au_writel(0xffffffff, IC0_ASSIGNCLR); au_sync(); + au_writel(sleep_intctl_assign[0], IC0_ASSIGNSET); au_sync(); + au_writel(0xffffffff, IC0_WAKECLR); au_sync(); + au_writel(sleep_intctl_wake[0], IC0_WAKESET); au_sync(); + au_writel(0xffffffff, IC0_RISINGCLR); au_sync(); + au_writel(0xffffffff, IC0_FALLINGCLR); au_sync(); + au_writel(0x00000000, IC0_TESTBIT); au_sync(); + + au_writel(0xffffffff, IC1_MASKCLR); au_sync(); + + au_writel(0xffffffff, IC1_CFG0CLR); au_sync(); + au_writel(sleep_intctl_config0[1], IC1_CFG0SET); au_sync(); + au_writel(0xffffffff, IC1_CFG1CLR); au_sync(); + au_writel(sleep_intctl_config1[1], IC1_CFG1SET); au_sync(); + au_writel(0xffffffff, IC1_CFG2CLR); au_sync(); + au_writel(sleep_intctl_config2[1], IC1_CFG2SET); au_sync(); + au_writel(0xffffffff, IC1_SRCCLR); au_sync(); + au_writel(sleep_intctl_src[1], IC1_SRCSET); au_sync(); + au_writel(0xffffffff, IC1_ASSIGNCLR); au_sync(); + au_writel(sleep_intctl_assign[1], IC1_ASSIGNSET); au_sync(); + au_writel(0xffffffff, IC1_WAKECLR); au_sync(); + au_writel(sleep_intctl_wake[1], IC1_WAKESET); au_sync(); + au_writel(0xffffffff, IC1_RISINGCLR); au_sync(); + au_writel(0xffffffff, IC1_FALLINGCLR); au_sync(); + au_writel(0x00000000, IC1_TESTBIT); au_sync(); + + au_writel(sleep_intctl_mask[1], IC1_MASKSET); au_sync(); + + au_writel(sleep_intctl_mask[0], IC0_MASKSET); au_sync(); +} +#endif /* CONFIG_PM */ + + +inline void local_enable_irq(unsigned int irq_nr) +{ + unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE; + + if (bit >= 32) { + au_writel(1 << (bit - 32), IC1_MASKSET); + au_writel(1 << (bit - 32), IC1_WAKESET); + } else { + au_writel(1 << bit, IC0_MASKSET); + au_writel(1 << bit, IC0_WAKESET); + } + au_sync(); +} + + +inline void local_disable_irq(unsigned int irq_nr) +{ + unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE; + + if (bit >= 32) { + au_writel(1 << (bit - 32), IC1_MASKCLR); + au_writel(1 << (bit - 32), IC1_WAKECLR); + } else { + au_writel(1 << bit, IC0_MASKCLR); + au_writel(1 << bit, IC0_WAKECLR); + } + au_sync(); +} + + +static inline void mask_and_ack_rise_edge_irq(unsigned int irq_nr) +{ + unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE; + + if (bit >= 32) { + au_writel(1 << (bit - 32), IC1_RISINGCLR); + au_writel(1 << (bit - 32), IC1_MASKCLR); + } else { + au_writel(1 << bit, IC0_RISINGCLR); + au_writel(1 << bit, IC0_MASKCLR); + } + au_sync(); +} + + +static inline void mask_and_ack_fall_edge_irq(unsigned int irq_nr) +{ + unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE; + + if (bit >= 32) { + au_writel(1 << (bit - 32), IC1_FALLINGCLR); + au_writel(1 << (bit - 32), IC1_MASKCLR); + } else { + au_writel(1 << bit, IC0_FALLINGCLR); + au_writel(1 << bit, IC0_MASKCLR); + } + au_sync(); +} + + +static inline void mask_and_ack_either_edge_irq(unsigned int irq_nr) +{ + unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE; + + /* + * This may assume that we don't get interrupts from + * both edges at once, or if we do, that we don't care. + */ + if (bit >= 32) { + au_writel(1 << (bit - 32), IC1_FALLINGCLR); + au_writel(1 << (bit - 32), IC1_RISINGCLR); + au_writel(1 << (bit - 32), IC1_MASKCLR); + } else { + au_writel(1 << bit, IC0_FALLINGCLR); + au_writel(1 << bit, IC0_RISINGCLR); + au_writel(1 << bit, IC0_MASKCLR); + } + au_sync(); +} + +static inline void mask_and_ack_level_irq(unsigned int irq_nr) +{ + local_disable_irq(irq_nr); + au_sync(); +#if defined(CONFIG_MIPS_PB1000) + if (irq_nr == AU1000_GPIO_15) { + au_writel(0x8000, PB1000_MDR); /* ack int */ + au_sync(); + } +#endif +} + +static void end_irq(unsigned int irq_nr) +{ + if (!(irq_desc[irq_nr].status & (IRQ_DISABLED | IRQ_INPROGRESS))) + local_enable_irq(irq_nr); + +#if defined(CONFIG_MIPS_PB1000) + if (irq_nr == AU1000_GPIO_15) { + au_writel(0x4000, PB1000_MDR); /* enable int */ + au_sync(); + } +#endif +} + +unsigned long save_local_and_disable(int controller) +{ + int i; + unsigned long flags, mask; + + spin_lock_irqsave(&irq_lock, flags); + if (controller) { + mask = au_readl(IC1_MASKSET); + for (i = 32; i < 64; i++) + local_disable_irq(i); + } else { + mask = au_readl(IC0_MASKSET); + for (i = 0; i < 32; i++) + local_disable_irq(i); + } + spin_unlock_irqrestore(&irq_lock, flags); + + return mask; +} + +void restore_local_and_enable(int controller, unsigned long mask) +{ + int i; + unsigned long flags, new_mask; + + spin_lock_irqsave(&irq_lock, flags); + for (i = 0; i < 32; i++) + if (mask & (1 << i)) { + if (controller) + local_enable_irq(i + 32); + else + local_enable_irq(i); + } + + if (controller) + new_mask = au_readl(IC1_MASKSET); + else + new_mask = au_readl(IC0_MASKSET); + + spin_unlock_irqrestore(&irq_lock, flags); +} + + +static struct irq_chip rise_edge_irq_type = { + .name = "Au1000 Rise Edge", + .ack = mask_and_ack_rise_edge_irq, + .mask = local_disable_irq, + .mask_ack = mask_and_ack_rise_edge_irq, + .unmask = local_enable_irq, + .end = end_irq, +}; + +static struct irq_chip fall_edge_irq_type = { + .name = "Au1000 Fall Edge", + .ack = mask_and_ack_fall_edge_irq, + .mask = local_disable_irq, + .mask_ack = mask_and_ack_fall_edge_irq, + .unmask = local_enable_irq, + .end = end_irq, +}; + +static struct irq_chip either_edge_irq_type = { + .name = "Au1000 Rise or Fall Edge", + .ack = mask_and_ack_either_edge_irq, + .mask = local_disable_irq, + .mask_ack = mask_and_ack_either_edge_irq, + .unmask = local_enable_irq, + .end = end_irq, +}; + +static struct irq_chip level_irq_type = { + .name = "Au1000 Level", + .ack = mask_and_ack_level_irq, + .mask = local_disable_irq, + .mask_ack = mask_and_ack_level_irq, + .unmask = local_enable_irq, + .end = end_irq, +}; + +static void __init setup_local_irq(unsigned int irq_nr, int type, int int_req) +{ + unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE; + + if (irq_nr > AU1000_MAX_INTR) + return; + + /* Config2[n], Config1[n], Config0[n] */ + if (bit >= 32) { + switch (type) { + case INTC_INT_RISE_EDGE: /* 0:0:1 */ + au_writel(1 << (bit - 32), IC1_CFG2CLR); + au_writel(1 << (bit - 32), IC1_CFG1CLR); + au_writel(1 << (bit - 32), IC1_CFG0SET); + set_irq_chip(irq_nr, &rise_edge_irq_type); + break; + case INTC_INT_FALL_EDGE: /* 0:1:0 */ + au_writel(1 << (bit - 32), IC1_CFG2CLR); + au_writel(1 << (bit - 32), IC1_CFG1SET); + au_writel(1 << (bit - 32), IC1_CFG0CLR); + set_irq_chip(irq_nr, &fall_edge_irq_type); + break; + case INTC_INT_RISE_AND_FALL_EDGE: /* 0:1:1 */ + au_writel(1 << (bit - 32), IC1_CFG2CLR); + au_writel(1 << (bit - 32), IC1_CFG1SET); + au_writel(1 << (bit - 32), IC1_CFG0SET); + set_irq_chip(irq_nr, &either_edge_irq_type); + break; + case INTC_INT_HIGH_LEVEL: /* 1:0:1 */ + au_writel(1 << (bit - 32), IC1_CFG2SET); + au_writel(1 << (bit - 32), IC1_CFG1CLR); + au_writel(1 << (bit - 32), IC1_CFG0SET); + set_irq_chip(irq_nr, &level_irq_type); + break; + case INTC_INT_LOW_LEVEL: /* 1:1:0 */ + au_writel(1 << (bit - 32), IC1_CFG2SET); + au_writel(1 << (bit - 32), IC1_CFG1SET); + au_writel(1 << (bit - 32), IC1_CFG0CLR); + set_irq_chip(irq_nr, &level_irq_type); + break; + case INTC_INT_DISABLED: /* 0:0:0 */ + au_writel(1 << (bit - 32), IC1_CFG0CLR); + au_writel(1 << (bit - 32), IC1_CFG1CLR); + au_writel(1 << (bit - 32), IC1_CFG2CLR); + break; + default: /* disable the interrupt */ + printk(KERN_WARNING "unexpected int type %d (irq %d)\n", + type, irq_nr); + au_writel(1 << (bit - 32), IC1_CFG0CLR); + au_writel(1 << (bit - 32), IC1_CFG1CLR); + au_writel(1 << (bit - 32), IC1_CFG2CLR); + return; + } + if (int_req) /* assign to interrupt request 1 */ + au_writel(1 << (bit - 32), IC1_ASSIGNCLR); + else /* assign to interrupt request 0 */ + au_writel(1 << (bit - 32), IC1_ASSIGNSET); + au_writel(1 << (bit - 32), IC1_SRCSET); + au_writel(1 << (bit - 32), IC1_MASKCLR); + au_writel(1 << (bit - 32), IC1_WAKECLR); + } else { + switch (type) { + case INTC_INT_RISE_EDGE: /* 0:0:1 */ + au_writel(1 << bit, IC0_CFG2CLR); + au_writel(1 << bit, IC0_CFG1CLR); + au_writel(1 << bit, IC0_CFG0SET); + set_irq_chip(irq_nr, &rise_edge_irq_type); + break; + case INTC_INT_FALL_EDGE: /* 0:1:0 */ + au_writel(1 << bit, IC0_CFG2CLR); + au_writel(1 << bit, IC0_CFG1SET); + au_writel(1 << bit, IC0_CFG0CLR); + set_irq_chip(irq_nr, &fall_edge_irq_type); + break; + case INTC_INT_RISE_AND_FALL_EDGE: /* 0:1:1 */ + au_writel(1 << bit, IC0_CFG2CLR); + au_writel(1 << bit, IC0_CFG1SET); + au_writel(1 << bit, IC0_CFG0SET); + set_irq_chip(irq_nr, &either_edge_irq_type); + break; + case INTC_INT_HIGH_LEVEL: /* 1:0:1 */ + au_writel(1 << bit, IC0_CFG2SET); + au_writel(1 << bit, IC0_CFG1CLR); + au_writel(1 << bit, IC0_CFG0SET); + set_irq_chip(irq_nr, &level_irq_type); + break; + case INTC_INT_LOW_LEVEL: /* 1:1:0 */ + au_writel(1 << bit, IC0_CFG2SET); + au_writel(1 << bit, IC0_CFG1SET); + au_writel(1 << bit, IC0_CFG0CLR); + set_irq_chip(irq_nr, &level_irq_type); + break; + case INTC_INT_DISABLED: /* 0:0:0 */ + au_writel(1 << bit, IC0_CFG0CLR); + au_writel(1 << bit, IC0_CFG1CLR); + au_writel(1 << bit, IC0_CFG2CLR); + break; + default: /* disable the interrupt */ + printk(KERN_WARNING "unexpected int type %d (irq %d)\n", + type, irq_nr); + au_writel(1 << bit, IC0_CFG0CLR); + au_writel(1 << bit, IC0_CFG1CLR); + au_writel(1 << bit, IC0_CFG2CLR); + return; + } + if (int_req) /* assign to interrupt request 1 */ + au_writel(1 << bit, IC0_ASSIGNCLR); + else /* assign to interrupt request 0 */ + au_writel(1 << bit, IC0_ASSIGNSET); + au_writel(1 << bit, IC0_SRCSET); + au_writel(1 << bit, IC0_MASKCLR); + au_writel(1 << bit, IC0_WAKECLR); + } + au_sync(); +} + +/* + * Interrupts are nested. Even if an interrupt handler is registered + * as "fast", we might get another interrupt before we return from + * intcX_reqX_irqdispatch(). + */ + +static void intc0_req0_irqdispatch(void) +{ + static unsigned long intc0_req0; + unsigned int bit; + + intc0_req0 |= au_readl(IC0_REQ0INT); + + if (!intc0_req0) + return; + +#ifdef AU1000_USB_DEV_REQ_INT + /* + * Because of the tight timing of SETUP token to reply + * transactions, the USB devices-side packet complete + * interrupt needs the highest priority. + */ + if ((intc0_req0 & (1 << AU1000_USB_DEV_REQ_INT))) { + intc0_req0 &= ~(1 << AU1000_USB_DEV_REQ_INT); + do_IRQ(AU1000_USB_DEV_REQ_INT); + return; + } +#endif + bit = __ffs(intc0_req0); + intc0_req0 &= ~(1 << bit); + do_IRQ(AU1000_INTC0_INT_BASE + bit); +} + + +static void intc0_req1_irqdispatch(void) +{ + static unsigned long intc0_req1; + unsigned int bit; + + intc0_req1 |= au_readl(IC0_REQ1INT); + + if (!intc0_req1) + return; + + bit = __ffs(intc0_req1); + intc0_req1 &= ~(1 << bit); + do_IRQ(AU1000_INTC0_INT_BASE + bit); +} + + +/* + * Interrupt Controller 1: + * interrupts 32 - 63 + */ +static void intc1_req0_irqdispatch(void) +{ + static unsigned long intc1_req0; + unsigned int bit; + + intc1_req0 |= au_readl(IC1_REQ0INT); + + if (!intc1_req0) + return; + + bit = __ffs(intc1_req0); + intc1_req0 &= ~(1 << bit); + do_IRQ(AU1000_INTC1_INT_BASE + bit); +} + + +static void intc1_req1_irqdispatch(void) +{ + static unsigned long intc1_req1; + unsigned int bit; + + intc1_req1 |= au_readl(IC1_REQ1INT); + + if (!intc1_req1) + return; + + bit = __ffs(intc1_req1); + intc1_req1 &= ~(1 << bit); + do_IRQ(AU1000_INTC1_INT_BASE + bit); +} + +asmlinkage void plat_irq_dispatch(void) +{ + unsigned int pending = read_c0_status() & read_c0_cause(); + + if (pending & CAUSEF_IP7) + do_IRQ(MIPS_CPU_IRQ_BASE + 7); + else if (pending & CAUSEF_IP2) + intc0_req0_irqdispatch(); + else if (pending & CAUSEF_IP3) + intc0_req1_irqdispatch(); + else if (pending & CAUSEF_IP4) + intc1_req0_irqdispatch(); + else if (pending & CAUSEF_IP5) + intc1_req1_irqdispatch(); + else + spurious_interrupt(); +} + +void __init arch_init_irq(void) +{ + int i; + struct au1xxx_irqmap *imp; + extern struct au1xxx_irqmap au1xxx_irq_map[]; + extern struct au1xxx_irqmap au1xxx_ic0_map[]; + extern int au1xxx_nr_irqs; + extern int au1xxx_ic0_nr_irqs; + + /* + * Initialize interrupt controllers to a safe state. + */ + au_writel(0xffffffff, IC0_CFG0CLR); + au_writel(0xffffffff, IC0_CFG1CLR); + au_writel(0xffffffff, IC0_CFG2CLR); + au_writel(0xffffffff, IC0_MASKCLR); + au_writel(0xffffffff, IC0_ASSIGNSET); + au_writel(0xffffffff, IC0_WAKECLR); + au_writel(0xffffffff, IC0_SRCSET); + au_writel(0xffffffff, IC0_FALLINGCLR); + au_writel(0xffffffff, IC0_RISINGCLR); + au_writel(0x00000000, IC0_TESTBIT); + + au_writel(0xffffffff, IC1_CFG0CLR); + au_writel(0xffffffff, IC1_CFG1CLR); + au_writel(0xffffffff, IC1_CFG2CLR); + au_writel(0xffffffff, IC1_MASKCLR); + au_writel(0xffffffff, IC1_ASSIGNSET); + au_writel(0xffffffff, IC1_WAKECLR); + au_writel(0xffffffff, IC1_SRCSET); + au_writel(0xffffffff, IC1_FALLINGCLR); + au_writel(0xffffffff, IC1_RISINGCLR); + au_writel(0x00000000, IC1_TESTBIT); + + mips_cpu_irq_init(); + + /* + * Initialize IC0, which is fixed per processor. + */ + imp = au1xxx_ic0_map; + for (i = 0; i < au1xxx_ic0_nr_irqs; i++) { + setup_local_irq(imp->im_irq, imp->im_type, imp->im_request); + imp++; + } + + /* + * Now set up the irq mapping for the board. + */ + imp = au1xxx_irq_map; + for (i = 0; i < au1xxx_nr_irqs; i++) { + setup_local_irq(imp->im_irq, imp->im_type, imp->im_request); + imp++; + } + + set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4); + + /* Board specific IRQ initialization. + */ + if (board_init_irq) + board_init_irq(); +} diff --git a/arch/mips/alchemy/common/pci.c b/arch/mips/alchemy/common/pci.c new file mode 100644 index 0000000..7866cf5 --- /dev/null +++ b/arch/mips/alchemy/common/pci.c @@ -0,0 +1,104 @@ +/* + * BRIEF MODULE DESCRIPTION + * Alchemy/AMD Au1x00 PCI support. + * + * Copyright 2001-2003, 2007-2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> + * + * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) + * + * Support for all devices (greater than 16) added by David Gathright. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/init.h> + +#include <asm/mach-au1x00/au1000.h> + +/* TBD */ +static struct resource pci_io_resource = { + .start = PCI_IO_START, + .end = PCI_IO_END, + .name = "PCI IO space", + .flags = IORESOURCE_IO +}; + +static struct resource pci_mem_resource = { + .start = PCI_MEM_START, + .end = PCI_MEM_END, + .name = "PCI memory space", + .flags = IORESOURCE_MEM +}; + +extern struct pci_ops au1x_pci_ops; + +static struct pci_controller au1x_controller = { + .pci_ops = &au1x_pci_ops, + .io_resource = &pci_io_resource, + .mem_resource = &pci_mem_resource, +}; + +#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550) +static unsigned long virt_io_addr; +#endif + +static int __init au1x_pci_setup(void) +{ + extern void au1x_pci_cfg_init(void); + +#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550) + virt_io_addr = (unsigned long)ioremap(Au1500_PCI_IO_START, + Au1500_PCI_IO_END - Au1500_PCI_IO_START + 1); + + if (!virt_io_addr) { + printk(KERN_ERR "Unable to ioremap pci space\n"); + return 1; + } + au1x_controller.io_map_base = virt_io_addr; + +#ifdef CONFIG_DMA_NONCOHERENT + { + /* + * Set the NC bit in controller for Au1500 pre-AC silicon + */ + u32 prid = read_c0_prid(); + + if ((prid & 0xFF000000) == 0x01000000 && prid < 0x01030202) { + au_writel((1 << 16) | au_readl(Au1500_PCI_CFG), + Au1500_PCI_CFG); + printk(KERN_INFO "Non-coherent PCI accesses enabled\n"); + } + } +#endif + + set_io_port_base(virt_io_addr); +#endif + + au1x_pci_cfg_init(); + + register_pci_controller(&au1x_controller); + return 0; +} + +arch_initcall(au1x_pci_setup); diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c new file mode 100644 index 0000000..5c76c64 --- /dev/null +++ b/arch/mips/alchemy/common/platform.c @@ -0,0 +1,369 @@ +/* + * Platform device support for Au1x00 SoCs. + * + * Copyright 2004, Matt Porter <mporter@kernel.crashing.org> + * + * (C) Copyright Embedded Alley Solutions, Inc 2005 + * Author: Pantelis Antoniou <pantelis@embeddedalley.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> +#include <linux/serial_8250.h> +#include <linux/init.h> + +#include <asm/mach-au1x00/au1xxx.h> +#include <asm/mach-au1x00/au1xxx_dbdma.h> +#include <asm/mach-au1x00/au1100_mmc.h> + +#define PORT(_base, _irq) \ + { \ + .iobase = _base, \ + .membase = (void __iomem *)_base,\ + .mapbase = CPHYSADDR(_base), \ + .irq = _irq, \ + .regshift = 2, \ + .iotype = UPIO_AU, \ + .flags = UPF_SKIP_TEST \ + } + +static struct plat_serial8250_port au1x00_uart_data[] = { +#if defined(CONFIG_SERIAL_8250_AU1X00) +#if defined(CONFIG_SOC_AU1000) + PORT(UART0_ADDR, AU1000_UART0_INT), + PORT(UART1_ADDR, AU1000_UART1_INT), + PORT(UART2_ADDR, AU1000_UART2_INT), + PORT(UART3_ADDR, AU1000_UART3_INT), +#elif defined(CONFIG_SOC_AU1500) + PORT(UART0_ADDR, AU1500_UART0_INT), + PORT(UART3_ADDR, AU1500_UART3_INT), +#elif defined(CONFIG_SOC_AU1100) + PORT(UART0_ADDR, AU1100_UART0_INT), + PORT(UART1_ADDR, AU1100_UART1_INT), + PORT(UART3_ADDR, AU1100_UART3_INT), +#elif defined(CONFIG_SOC_AU1550) + PORT(UART0_ADDR, AU1550_UART0_INT), + PORT(UART1_ADDR, AU1550_UART1_INT), + PORT(UART3_ADDR, AU1550_UART3_INT), +#elif defined(CONFIG_SOC_AU1200) + PORT(UART0_ADDR, AU1200_UART0_INT), + PORT(UART1_ADDR, AU1200_UART1_INT), +#endif +#endif /* CONFIG_SERIAL_8250_AU1X00 */ + { }, +}; + +static struct platform_device au1xx0_uart_device = { + .name = "serial8250", + .id = PLAT8250_DEV_AU1X00, + .dev = { + .platform_data = au1x00_uart_data, + }, +}; + +/* OHCI (USB full speed host controller) */ +static struct resource au1xxx_usb_ohci_resources[] = { + [0] = { + .start = USB_OHCI_BASE, + .end = USB_OHCI_BASE + USB_OHCI_LEN - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1000_USB_HOST_INT, + .end = AU1000_USB_HOST_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +/* The dmamask must be set for OHCI to work */ +static u64 ohci_dmamask = DMA_32BIT_MASK; + +static struct platform_device au1xxx_usb_ohci_device = { + .name = "au1xxx-ohci", + .id = 0, + .dev = { + .dma_mask = &ohci_dmamask, + .coherent_dma_mask = DMA_32BIT_MASK, + }, + .num_resources = ARRAY_SIZE(au1xxx_usb_ohci_resources), + .resource = au1xxx_usb_ohci_resources, +}; + +/*** AU1100 LCD controller ***/ + +#ifdef CONFIG_FB_AU1100 +static struct resource au1100_lcd_resources[] = { + [0] = { + .start = LCD_PHYS_ADDR, + .end = LCD_PHYS_ADDR + 0x800 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1100_LCD_INT, + .end = AU1100_LCD_INT, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 au1100_lcd_dmamask = DMA_32BIT_MASK; + +static struct platform_device au1100_lcd_device = { + .name = "au1100-lcd", + .id = 0, + .dev = { + .dma_mask = &au1100_lcd_dmamask, + .coherent_dma_mask = DMA_32BIT_MASK, + }, + .num_resources = ARRAY_SIZE(au1100_lcd_resources), + .resource = au1100_lcd_resources, +}; +#endif + +#ifdef CONFIG_SOC_AU1200 +/* EHCI (USB high speed host controller) */ +static struct resource au1xxx_usb_ehci_resources[] = { + [0] = { + .start = USB_EHCI_BASE, + .end = USB_EHCI_BASE + USB_EHCI_LEN - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1000_USB_HOST_INT, + .end = AU1000_USB_HOST_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 ehci_dmamask = DMA_32BIT_MASK; + +static struct platform_device au1xxx_usb_ehci_device = { + .name = "au1xxx-ehci", + .id = 0, + .dev = { + .dma_mask = &ehci_dmamask, + .coherent_dma_mask = DMA_32BIT_MASK, + }, + .num_resources = ARRAY_SIZE(au1xxx_usb_ehci_resources), + .resource = au1xxx_usb_ehci_resources, +}; + +/* Au1200 UDC (USB gadget controller) */ +static struct resource au1xxx_usb_gdt_resources[] = { + [0] = { + .start = USB_UDC_BASE, + .end = USB_UDC_BASE + USB_UDC_LEN - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1200_USB_INT, + .end = AU1200_USB_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 udc_dmamask = DMA_32BIT_MASK; + +static struct platform_device au1xxx_usb_gdt_device = { + .name = "au1xxx-udc", + .id = 0, + .dev = { + .dma_mask = &udc_dmamask, + .coherent_dma_mask = DMA_32BIT_MASK, + }, + .num_resources = ARRAY_SIZE(au1xxx_usb_gdt_resources), + .resource = au1xxx_usb_gdt_resources, +}; + +/* Au1200 UOC (USB OTG controller) */ +static struct resource au1xxx_usb_otg_resources[] = { + [0] = { + .start = USB_UOC_BASE, + .end = USB_UOC_BASE + USB_UOC_LEN - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1200_USB_INT, + .end = AU1200_USB_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 uoc_dmamask = DMA_32BIT_MASK; + +static struct platform_device au1xxx_usb_otg_device = { + .name = "au1xxx-uoc", + .id = 0, + .dev = { + .dma_mask = &uoc_dmamask, + .coherent_dma_mask = DMA_32BIT_MASK, + }, + .num_resources = ARRAY_SIZE(au1xxx_usb_otg_resources), + .resource = au1xxx_usb_otg_resources, +}; + +static struct resource au1200_lcd_resources[] = { + [0] = { + .start = LCD_PHYS_ADDR, + .end = LCD_PHYS_ADDR + 0x800 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1200_LCD_INT, + .end = AU1200_LCD_INT, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 au1200_lcd_dmamask = DMA_32BIT_MASK; + +static struct platform_device au1200_lcd_device = { + .name = "au1200-lcd", + .id = 0, + .dev = { + .dma_mask = &au1200_lcd_dmamask, + .coherent_dma_mask = DMA_32BIT_MASK, + }, + .num_resources = ARRAY_SIZE(au1200_lcd_resources), + .resource = au1200_lcd_resources, +}; + +static u64 au1xxx_mmc_dmamask = DMA_32BIT_MASK; + +extern struct au1xmmc_platform_data au1xmmc_platdata[2]; + +static struct resource au1200_mmc0_resources[] = { + [0] = { + .start = SD0_PHYS_ADDR, + .end = SD0_PHYS_ADDR + 0x7ffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1200_SD_INT, + .end = AU1200_SD_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = DSCR_CMD0_SDMS_TX0, + .end = DSCR_CMD0_SDMS_TX0, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = DSCR_CMD0_SDMS_RX0, + .end = DSCR_CMD0_SDMS_RX0, + .flags = IORESOURCE_DMA, + } +}; + +static struct platform_device au1200_mmc0_device = { + .name = "au1xxx-mmc", + .id = 0, + .dev = { + .dma_mask = &au1xxx_mmc_dmamask, + .coherent_dma_mask = DMA_32BIT_MASK, + .platform_data = &au1xmmc_platdata[0], + }, + .num_resources = ARRAY_SIZE(au1200_mmc0_resources), + .resource = au1200_mmc0_resources, +}; + +#ifndef CONFIG_MIPS_DB1200 +static struct resource au1200_mmc1_resources[] = { + [0] = { + .start = SD1_PHYS_ADDR, + .end = SD1_PHYS_ADDR + 0x7ffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1200_SD_INT, + .end = AU1200_SD_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = DSCR_CMD0_SDMS_TX1, + .end = DSCR_CMD0_SDMS_TX1, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = DSCR_CMD0_SDMS_RX1, + .end = DSCR_CMD0_SDMS_RX1, + .flags = IORESOURCE_DMA, + } +}; + +static struct platform_device au1200_mmc1_device = { + .name = "au1xxx-mmc", + .id = 1, + .dev = { + .dma_mask = &au1xxx_mmc_dmamask, + .coherent_dma_mask = DMA_32BIT_MASK, + .platform_data = &au1xmmc_platdata[1], + }, + .num_resources = ARRAY_SIZE(au1200_mmc1_resources), + .resource = au1200_mmc1_resources, +}; +#endif /* #ifndef CONFIG_MIPS_DB1200 */ +#endif /* #ifdef CONFIG_SOC_AU1200 */ + +static struct platform_device au1x00_pcmcia_device = { + .name = "au1x00-pcmcia", + .id = 0, +}; + +/* All Alchemy demoboards with I2C have this #define in their headers */ +#ifdef SMBUS_PSC_BASE +static struct resource pbdb_smbus_resources[] = { + { + .start = CPHYSADDR(SMBUS_PSC_BASE), + .end = CPHYSADDR(SMBUS_PSC_BASE + 0xfffff), + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device pbdb_smbus_device = { + .name = "au1xpsc_smbus", + .id = 0, /* bus number */ + .num_resources = ARRAY_SIZE(pbdb_smbus_resources), + .resource = pbdb_smbus_resources, +}; +#endif + +static struct platform_device *au1xxx_platform_devices[] __initdata = { + &au1xx0_uart_device, + &au1xxx_usb_ohci_device, + &au1x00_pcmcia_device, +#ifdef CONFIG_FB_AU1100 + &au1100_lcd_device, +#endif +#ifdef CONFIG_SOC_AU1200 + &au1xxx_usb_ehci_device, + &au1xxx_usb_gdt_device, + &au1xxx_usb_otg_device, + &au1200_lcd_device, + &au1200_mmc0_device, +#ifndef CONFIG_MIPS_DB1200 + &au1200_mmc1_device, +#endif +#endif +#ifdef SMBUS_PSC_BASE + &pbdb_smbus_device, +#endif +}; + +static int __init au1xxx_platform_init(void) +{ + unsigned int uartclk = get_au1x00_uart_baud_base() * 16; + int i; + + /* Fill up uartclk. */ + for (i = 0; au1x00_uart_data[i].flags; i++) + au1x00_uart_data[i].uartclk = uartclk; + + return platform_add_devices(au1xxx_platform_devices, + ARRAY_SIZE(au1xxx_platform_devices)); +} + +arch_initcall(au1xxx_platform_init); diff --git a/arch/mips/alchemy/common/power.c b/arch/mips/alchemy/common/power.c new file mode 100644 index 0000000..bd854a6 --- /dev/null +++ b/arch/mips/alchemy/common/power.c @@ -0,0 +1,465 @@ +/* + * BRIEF MODULE DESCRIPTION + * Au1xx0 Power Management routines. + * + * Copyright 2001, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> + * + * Some of the routines are right out of init/main.c, whose + * copyrights apply here. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <linux/pm.h> +#include <linux/sysctl.h> +#include <linux/jiffies.h> + +#include <asm/uaccess.h> +#include <asm/cacheflush.h> +#include <asm/mach-au1x00/au1000.h> + +#ifdef CONFIG_PM + +#define DEBUG 1 +#ifdef DEBUG +#define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt, __func__, ## args) +#else +#define DPRINTK(fmt, args...) +#endif + +static void au1000_calibrate_delay(void); + +extern unsigned long save_local_and_disable(int controller); +extern void restore_local_and_enable(int controller, unsigned long mask); +extern void local_enable_irq(unsigned int irq_nr); + +static DEFINE_SPINLOCK(pm_lock); + +/* + * We need to save/restore a bunch of core registers that are + * either volatile or reset to some state across a processor sleep. + * If reading a register doesn't provide a proper result for a + * later restore, we have to provide a function for loading that + * register and save a copy. + * + * We only have to save/restore registers that aren't otherwise + * done as part of a driver pm_* function. + */ +static unsigned int sleep_aux_pll_cntrl; +static unsigned int sleep_cpu_pll_cntrl; +static unsigned int sleep_pin_function; +static unsigned int sleep_uart0_inten; +static unsigned int sleep_uart0_fifoctl; +static unsigned int sleep_uart0_linectl; +static unsigned int sleep_uart0_clkdiv; +static unsigned int sleep_uart0_enable; +static unsigned int sleep_usbhost_enable; +static unsigned int sleep_usbdev_enable; +static unsigned int sleep_static_memctlr[4][3]; + +/* + * Define this to cause the value you write to /proc/sys/pm/sleep to + * set the TOY timer for the amount of time you want to sleep. + * This is done mainly for testing, but may be useful in other cases. + * The value is number of 32KHz ticks to sleep. + */ +#define SLEEP_TEST_TIMEOUT 1 +#ifdef SLEEP_TEST_TIMEOUT +static int sleep_ticks; +void wakeup_counter0_set(int ticks); +#endif + +static void save_core_regs(void) +{ + extern void save_au1xxx_intctl(void); + extern void pm_eth0_shutdown(void); + + /* + * Do the serial ports.....these really should be a pm_* + * registered function by the driver......but of course the + * standard serial driver doesn't understand our Au1xxx + * unique registers. + */ + sleep_uart0_inten = au_readl(UART0_ADDR + UART_IER); + sleep_uart0_fifoctl = au_readl(UART0_ADDR + UART_FCR); + sleep_uart0_linectl = au_readl(UART0_ADDR + UART_LCR); + sleep_uart0_clkdiv = au_readl(UART0_ADDR + UART_CLK); + sleep_uart0_enable = au_readl(UART0_ADDR + UART_MOD_CNTRL); + + /* Shutdown USB host/device. */ + sleep_usbhost_enable = au_readl(USB_HOST_CONFIG); + + /* There appears to be some undocumented reset register.... */ + au_writel(0, 0xb0100004); au_sync(); + au_writel(0, USB_HOST_CONFIG); au_sync(); + + sleep_usbdev_enable = au_readl(USBD_ENABLE); + au_writel(0, USBD_ENABLE); au_sync(); + + /* Save interrupt controller state. */ + save_au1xxx_intctl(); + + /* Clocks and PLLs. */ + sleep_aux_pll_cntrl = au_readl(SYS_AUXPLL); + + /* + * We don't really need to do this one, but unless we + * write it again it won't have a valid value if we + * happen to read it. + */ + sleep_cpu_pll_cntrl = au_readl(SYS_CPUPLL); + + sleep_pin_function = au_readl(SYS_PINFUNC); + + /* Save the static memory controller configuration. */ + sleep_static_memctlr[0][0] = au_readl(MEM_STCFG0); + sleep_static_memctlr[0][1] = au_readl(MEM_STTIME0); + sleep_static_memctlr[0][2] = au_readl(MEM_STADDR0); + sleep_static_memctlr[1][0] = au_readl(MEM_STCFG1); + sleep_static_memctlr[1][1] = au_readl(MEM_STTIME1); + sleep_static_memctlr[1][2] = au_readl(MEM_STADDR1); + sleep_static_memctlr[2][0] = au_readl(MEM_STCFG2); + sleep_static_memctlr[2][1] = au_readl(MEM_STTIME2); + sleep_static_memctlr[2][2] = au_readl(MEM_STADDR2); + sleep_static_memctlr[3][0] = au_readl(MEM_STCFG3); + sleep_static_memctlr[3][1] = au_readl(MEM_STTIME3); + sleep_static_memctlr[3][2] = au_readl(MEM_STADDR3); +} + +static void restore_core_regs(void) +{ + extern void restore_au1xxx_intctl(void); + extern void wakeup_counter0_adjust(void); + + au_writel(sleep_aux_pll_cntrl, SYS_AUXPLL); au_sync(); + au_writel(sleep_cpu_pll_cntrl, SYS_CPUPLL); au_sync(); + au_writel(sleep_pin_function, SYS_PINFUNC); au_sync(); + + /* Restore the static memory controller configuration. */ + au_writel(sleep_static_memctlr[0][0], MEM_STCFG0); + au_writel(sleep_static_memctlr[0][1], MEM_STTIME0); + au_writel(sleep_static_memctlr[0][2], MEM_STADDR0); + au_writel(sleep_static_memctlr[1][0], MEM_STCFG1); + au_writel(sleep_static_memctlr[1][1], MEM_STTIME1); + au_writel(sleep_static_memctlr[1][2], MEM_STADDR1); + au_writel(sleep_static_memctlr[2][0], MEM_STCFG2); + au_writel(sleep_static_memctlr[2][1], MEM_STTIME2); + au_writel(sleep_static_memctlr[2][2], MEM_STADDR2); + au_writel(sleep_static_memctlr[3][0], MEM_STCFG3); + au_writel(sleep_static_memctlr[3][1], MEM_STTIME3); + au_writel(sleep_static_memctlr[3][2], MEM_STADDR3); + + /* + * Enable the UART if it was enabled before sleep. + * I guess I should define module control bits........ + */ + if (sleep_uart0_enable & 0x02) { + au_writel(0, UART0_ADDR + UART_MOD_CNTRL); au_sync(); + au_writel(1, UART0_ADDR + UART_MOD_CNTRL); au_sync(); + au_writel(3, UART0_ADDR + UART_MOD_CNTRL); au_sync(); + au_writel(sleep_uart0_inten, UART0_ADDR + UART_IER); au_sync(); + au_writel(sleep_uart0_fifoctl, UART0_ADDR + UART_FCR); au_sync(); + au_writel(sleep_uart0_linectl, UART0_ADDR + UART_LCR); au_sync(); + au_writel(sleep_uart0_clkdiv, UART0_ADDR + UART_CLK); au_sync(); + } + + restore_au1xxx_intctl(); + wakeup_counter0_adjust(); +} + +unsigned long suspend_mode; + +void wakeup_from_suspend(void) +{ + suspend_mode = 0; +} + +int au_sleep(void) +{ + unsigned long wakeup, flags; + extern void save_and_sleep(void); + + spin_lock_irqsave(&pm_lock, flags); + + save_core_regs(); + + flush_cache_all(); + + /** + ** The code below is all system dependent and we should probably + ** have a function call out of here to set this up. You need + ** to configure the GPIO or timer interrupts that will bring + ** you out of sleep. + ** For testing, the TOY counter wakeup is useful. + **/ +#if 0 + au_writel(au_readl(SYS_PINSTATERD) & ~(1 << 11), SYS_PINSTATERD); + + /* GPIO 6 can cause a wake up event */ + wakeup = au_readl(SYS_WAKEMSK); + wakeup &= ~(1 << 8); /* turn off match20 wakeup */ + wakeup |= 1 << 6; /* turn on GPIO 6 wakeup */ +#else + /* For testing, allow match20 to wake us up. */ +#ifdef SLEEP_TEST_TIMEOUT + wakeup_counter0_set(sleep_ticks); +#endif + wakeup = 1 << 8; /* turn on match20 wakeup */ + wakeup = 0; +#endif + au_writel(1, SYS_WAKESRC); /* clear cause */ + au_sync(); + au_writel(wakeup, SYS_WAKEMSK); + au_sync(); + + save_and_sleep(); + + /* + * After a wakeup, the cpu vectors back to 0x1fc00000, so + * it's up to the boot code to get us back here. + */ + restore_core_regs(); + spin_unlock_irqrestore(&pm_lock, flags); + return 0; +} + +static int pm_do_sleep(ctl_table *ctl, int write, struct file *file, + void __user *buffer, size_t *len, loff_t *ppos) +{ +#ifdef SLEEP_TEST_TIMEOUT +#define TMPBUFLEN2 16 + char buf[TMPBUFLEN2], *p; +#endif + + if (!write) + *len = 0; + else { +#ifdef SLEEP_TEST_TIMEOUT + if (*len > TMPBUFLEN2 - 1) + return -EFAULT; + if (copy_from_user(buf, buffer, *len)) + return -EFAULT; + buf[*len] = 0; + p = buf; + sleep_ticks = simple_strtoul(p, &p, 0); +#endif + + au_sleep(); + } + return 0; +} + +static int pm_do_freq(ctl_table *ctl, int write, struct file *file, + void __user *buffer, size_t *len, loff_t *ppos) +{ + int retval = 0, i; + unsigned long val, pll; +#define TMPBUFLEN 64 +#define MAX_CPU_FREQ 396 + char buf[TMPBUFLEN], *p; + unsigned long flags, intc0_mask, intc1_mask; + unsigned long old_baud_base, old_cpu_freq, old_clk, old_refresh; + unsigned long new_baud_base, new_cpu_freq, new_clk, new_refresh; + unsigned long baud_rate; + + spin_lock_irqsave(&pm_lock, flags); + if (!write) + *len = 0; + else { + /* Parse the new frequency */ + if (*len > TMPBUFLEN - 1) { + spin_unlock_irqrestore(&pm_lock, flags); + return -EFAULT; + } + if (copy_from_user(buf, buffer, *len)) { + spin_unlock_irqrestore(&pm_lock, flags); + return -EFAULT; + } + buf[*len] = 0; + p = buf; + val = simple_strtoul(p, &p, 0); + if (val > MAX_CPU_FREQ) { + spin_unlock_irqrestore(&pm_lock, flags); + return -EFAULT; + } + + pll = val / 12; + if ((pll > 33) || (pll < 7)) { /* 396 MHz max, 84 MHz min */ + /* Revisit this for higher speed CPUs */ + spin_unlock_irqrestore(&pm_lock, flags); + return -EFAULT; + } + + old_baud_base = get_au1x00_uart_baud_base(); + old_cpu_freq = get_au1x00_speed(); + + new_cpu_freq = pll * 12 * 1000000; + new_baud_base = (new_cpu_freq / (2 * ((int)(au_readl(SYS_POWERCTRL) + & 0x03) + 2) * 16)); + set_au1x00_speed(new_cpu_freq); + set_au1x00_uart_baud_base(new_baud_base); + + old_refresh = au_readl(MEM_SDREFCFG) & 0x1ffffff; + new_refresh = ((old_refresh * new_cpu_freq) / old_cpu_freq) | + (au_readl(MEM_SDREFCFG) & ~0x1ffffff); + + au_writel(pll, SYS_CPUPLL); + au_sync_delay(1); + au_writel(new_refresh, MEM_SDREFCFG); + au_sync_delay(1); + + for (i = 0; i < 4; i++) + if (au_readl(UART_BASE + UART_MOD_CNTRL + + i * 0x00100000) == 3) { + old_clk = au_readl(UART_BASE + UART_CLK + + i * 0x00100000); + baud_rate = old_baud_base / old_clk; + /* + * We won't get an exact baud rate and the error + * could be significant enough that our new + * calculation will result in a clock that will + * give us a baud rate that's too far off from + * what we really want. + */ + if (baud_rate > 100000) + baud_rate = 115200; + else if (baud_rate > 50000) + baud_rate = 57600; + else if (baud_rate > 30000) + baud_rate = 38400; + else if (baud_rate > 17000) + baud_rate = 19200; + else + baud_rate = 9600; + new_clk = new_baud_base / baud_rate; + au_writel(new_clk, UART_BASE + UART_CLK + + i * 0x00100000); + au_sync_delay(10); + } + } + + /* + * We don't want _any_ interrupts other than match20. Otherwise our + * au1000_calibrate_delay() calculation will be off, potentially a lot. + */ + intc0_mask = save_local_and_disable(0); + intc1_mask = save_local_and_disable(1); + local_enable_irq(AU1000_TOY_MATCH2_INT); + spin_unlock_irqrestore(&pm_lock, flags); + au1000_calibrate_delay(); + restore_local_and_enable(0, intc0_mask); + restore_local_and_enable(1, intc1_mask); + + return retval; +} + + +static struct ctl_table pm_table[] = { + { + .ctl_name = CTL_UNNUMBERED, + .procname = "sleep", + .data = NULL, + .maxlen = 0, + .mode = 0600, + .proc_handler = &pm_do_sleep + }, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "freq", + .data = NULL, + .maxlen = 0, + .mode = 0600, + .proc_handler = &pm_do_freq + }, + {} +}; + +static struct ctl_table pm_dir_table[] = { + { + .ctl_name = CTL_UNNUMBERED, + .procname = "pm", + .mode = 0555, + .child = pm_table + }, + {} +}; + +/* + * Initialize power interface + */ +static int __init pm_init(void) +{ + register_sysctl_table(pm_dir_table); + return 0; +} + +__initcall(pm_init); + +/* + * This is right out of init/main.c + */ + +/* + * This is the number of bits of precision for the loops_per_jiffy. + * Each bit takes on average 1.5/HZ seconds. This (like the original) + * is a little better than 1%. + */ +#define LPS_PREC 8 + +static void au1000_calibrate_delay(void) +{ + unsigned long ticks, loopbit; + int lps_precision = LPS_PREC; + + loops_per_jiffy = 1 << 12; + + while (loops_per_jiffy <<= 1) { + /* Wait for "start of" clock tick */ + ticks = jiffies; + while (ticks == jiffies) + /* nothing */ ; + /* Go ... */ + ticks = jiffies; + __delay(loops_per_jiffy); + ticks = jiffies - ticks; + if (ticks) + break; + } + + /* + * Do a binary approximation to get loops_per_jiffy set to be equal + * one clock (up to lps_precision bits) + */ + loops_per_jiffy >>= 1; + loopbit = loops_per_jiffy; + while (lps_precision-- && (loopbit >>= 1)) { + loops_per_jiffy |= loopbit; + ticks = jiffies; + while (ticks == jiffies); + ticks = jiffies; + __delay(loops_per_jiffy); + if (jiffies != ticks) /* longer than 1 tick */ + loops_per_jiffy &= ~loopbit; + } +} +#endif /* CONFIG_PM */ diff --git a/arch/mips/alchemy/common/prom.c b/arch/mips/alchemy/common/prom.c new file mode 100644 index 0000000..18b310b --- /dev/null +++ b/arch/mips/alchemy/common/prom.c @@ -0,0 +1,146 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * PROM library initialisation code, supports YAMON and U-Boot. + * + * Copyright 2000-2001, 2006, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> + * + * This file was derived from Carsten Langgaard's + * arch/mips/mips-boards/xx files. + * + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/string.h> + +#include <asm/bootinfo.h> + +int prom_argc; +char **prom_argv; +char **prom_envp; + +char * __init_or_module prom_getcmdline(void) +{ + return &(arcs_cmdline[0]); +} + +void prom_init_cmdline(void) +{ + char *cp; + int actr; + + actr = 1; /* Always ignore argv[0] */ + + cp = &(arcs_cmdline[0]); + while (actr < prom_argc) { + strcpy(cp, prom_argv[actr]); + cp += strlen(prom_argv[actr]); + *cp++ = ' '; + actr++; + } + if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */ + --cp; + if (prom_argc > 1) + *cp = '\0'; +} + +char *prom_getenv(char *envname) +{ + /* + * Return a pointer to the given environment variable. + * YAMON uses "name", "value" pairs, while U-Boot uses "name=value". + */ + + char **env = prom_envp; + int i = strlen(envname); + int yamon = (*env && strchr(*env, '=') == NULL); + + while (*env) { + if (yamon) { + if (strcmp(envname, *env++) == 0) + return *env; + } else if (strncmp(envname, *env, i) == 0 && (*env)[i] == '=') + return *env + i + 1; + env++; + } + + return NULL; +} + +static inline unsigned char str2hexnum(unsigned char c) +{ + if (c >= '0' && c <= '9') + return c - '0'; + if (c >= 'a' && c <= 'f') + return c - 'a' + 10; + if (c >= 'A' && c <= 'F') + return c - 'A' + 10; + + return 0; /* foo */ +} + +static inline void str2eaddr(unsigned char *ea, unsigned char *str) +{ + int i; + + for (i = 0; i < 6; i++) { + unsigned char num; + + if ((*str == '.') || (*str == ':')) + str++; + num = str2hexnum(*str++) << 4; + num |= str2hexnum(*str++); + ea[i] = num; + } +} + +int prom_get_ethernet_addr(char *ethernet_addr) +{ + char *ethaddr_str; + char *argptr; + + /* Check the environment variables first */ + ethaddr_str = prom_getenv("ethaddr"); + if (!ethaddr_str) { + /* Check command line */ + argptr = prom_getcmdline(); + ethaddr_str = strstr(argptr, "ethaddr="); + if (!ethaddr_str) + return -1; + + ethaddr_str += strlen("ethaddr="); + } + + str2eaddr(ethernet_addr, ethaddr_str); + + return 0; +} +EXPORT_SYMBOL(prom_get_ethernet_addr); + +void __init prom_free_prom_memory(void) +{ +} diff --git a/arch/mips/alchemy/common/puts.c b/arch/mips/alchemy/common/puts.c new file mode 100644 index 0000000..55bbe24 --- /dev/null +++ b/arch/mips/alchemy/common/puts.c @@ -0,0 +1,68 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * Low level UART routines to directly access Alchemy UART. + * + * Copyright 2001, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <asm/mach-au1x00/au1000.h> + +#define SERIAL_BASE UART_BASE +#define SER_CMD 0x7 +#define SER_DATA 0x1 +#define TX_BUSY 0x20 + +#define TIMEOUT 0xffffff +#define SLOW_DOWN + +static volatile unsigned long * const com1 = (unsigned long *)SERIAL_BASE; + +#ifdef SLOW_DOWN +static inline void slow_down(void) +{ + int k; + + for (k = 0; k < 10000; k++); +} +#else +#define slow_down() +#endif + +void +prom_putchar(const unsigned char c) +{ + unsigned char ch; + int i = 0; + + do { + ch = com1[SER_CMD]; + slow_down(); + i++; + if (i > TIMEOUT) + break; + } while (0 == (ch & TX_BUSY)); + + com1[SER_DATA] = c; +} diff --git a/arch/mips/alchemy/common/reset.c b/arch/mips/alchemy/common/reset.c new file mode 100644 index 0000000..d555429 --- /dev/null +++ b/arch/mips/alchemy/common/reset.c @@ -0,0 +1,189 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * Au1xx0 reset routines. + * + * Copyright 2001, 2006, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <asm/cacheflush.h> + +#include <asm/mach-au1x00/au1000.h> + +extern int au_sleep(void); + +void au1000_restart(char *command) +{ + /* Set all integrated peripherals to disabled states */ + extern void board_reset(void); + u32 prid = read_c0_prid(); + + printk(KERN_NOTICE "\n** Resetting Integrated Peripherals\n"); + + switch (prid & 0xFF000000) { + case 0x00000000: /* Au1000 */ + au_writel(0x02, 0xb0000010); /* ac97_enable */ + au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */ + asm("sync"); + au_writel(0x00, 0xb017fffc); /* usbh_enable */ + au_writel(0x00, 0xb0200058); /* usbd_enable */ + au_writel(0x00, 0xb0300040); /* ir_enable */ + au_writel(0x00, 0xb4004104); /* mac dma */ + au_writel(0x00, 0xb4004114); /* mac dma */ + au_writel(0x00, 0xb4004124); /* mac dma */ + au_writel(0x00, 0xb4004134); /* mac dma */ + au_writel(0x00, 0xb0520000); /* macen0 */ + au_writel(0x00, 0xb0520004); /* macen1 */ + au_writel(0x00, 0xb1000008); /* i2s_enable */ + au_writel(0x00, 0xb1100100); /* uart0_enable */ + au_writel(0x00, 0xb1200100); /* uart1_enable */ + au_writel(0x00, 0xb1300100); /* uart2_enable */ + au_writel(0x00, 0xb1400100); /* uart3_enable */ + au_writel(0x02, 0xb1600100); /* ssi0_enable */ + au_writel(0x02, 0xb1680100); /* ssi1_enable */ + au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */ + au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */ + au_writel(0x00, 0xb1900028); /* sys_clksrc */ + au_writel(0x10, 0xb1900060); /* sys_cpupll */ + au_writel(0x00, 0xb1900064); /* sys_auxpll */ + au_writel(0x00, 0xb1900100); /* sys_pininputen */ + break; + case 0x01000000: /* Au1500 */ + au_writel(0x02, 0xb0000010); /* ac97_enable */ + au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */ + asm("sync"); + au_writel(0x00, 0xb017fffc); /* usbh_enable */ + au_writel(0x00, 0xb0200058); /* usbd_enable */ + au_writel(0x00, 0xb4004104); /* mac dma */ + au_writel(0x00, 0xb4004114); /* mac dma */ + au_writel(0x00, 0xb4004124); /* mac dma */ + au_writel(0x00, 0xb4004134); /* mac dma */ + au_writel(0x00, 0xb1520000); /* macen0 */ + au_writel(0x00, 0xb1520004); /* macen1 */ + au_writel(0x00, 0xb1100100); /* uart0_enable */ + au_writel(0x00, 0xb1400100); /* uart3_enable */ + au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */ + au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */ + au_writel(0x00, 0xb1900028); /* sys_clksrc */ + au_writel(0x10, 0xb1900060); /* sys_cpupll */ + au_writel(0x00, 0xb1900064); /* sys_auxpll */ + au_writel(0x00, 0xb1900100); /* sys_pininputen */ + break; + case 0x02000000: /* Au1100 */ + au_writel(0x02, 0xb0000010); /* ac97_enable */ + au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */ + asm("sync"); + au_writel(0x00, 0xb017fffc); /* usbh_enable */ + au_writel(0x00, 0xb0200058); /* usbd_enable */ + au_writel(0x00, 0xb0300040); /* ir_enable */ + au_writel(0x00, 0xb4004104); /* mac dma */ + au_writel(0x00, 0xb4004114); /* mac dma */ + au_writel(0x00, 0xb4004124); /* mac dma */ + au_writel(0x00, 0xb4004134); /* mac dma */ + au_writel(0x00, 0xb0520000); /* macen0 */ + au_writel(0x00, 0xb1000008); /* i2s_enable */ + au_writel(0x00, 0xb1100100); /* uart0_enable */ + au_writel(0x00, 0xb1200100); /* uart1_enable */ + au_writel(0x00, 0xb1400100); /* uart3_enable */ + au_writel(0x02, 0xb1600100); /* ssi0_enable */ + au_writel(0x02, 0xb1680100); /* ssi1_enable */ + au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */ + au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */ + au_writel(0x00, 0xb1900028); /* sys_clksrc */ + au_writel(0x10, 0xb1900060); /* sys_cpupll */ + au_writel(0x00, 0xb1900064); /* sys_auxpll */ + au_writel(0x00, 0xb1900100); /* sys_pininputen */ + break; + case 0x03000000: /* Au1550 */ + au_writel(0x00, 0xb1a00004); /* psc 0 */ + au_writel(0x00, 0xb1b00004); /* psc 1 */ + au_writel(0x00, 0xb0a00004); /* psc 2 */ + au_writel(0x00, 0xb0b00004); /* psc 3 */ + au_writel(0x00, 0xb017fffc); /* usbh_enable */ + au_writel(0x00, 0xb0200058); /* usbd_enable */ + au_writel(0x00, 0xb4004104); /* mac dma */ + au_writel(0x00, 0xb4004114); /* mac dma */ + au_writel(0x00, 0xb4004124); /* mac dma */ + au_writel(0x00, 0xb4004134); /* mac dma */ + au_writel(0x00, 0xb1520000); /* macen0 */ + au_writel(0x00, 0xb1520004); /* macen1 */ + au_writel(0x00, 0xb1100100); /* uart0_enable */ + au_writel(0x00, 0xb1200100); /* uart1_enable */ + au_writel(0x00, 0xb1400100); /* uart3_enable */ + au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */ + au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */ + au_writel(0x00, 0xb1900028); /* sys_clksrc */ + au_writel(0x10, 0xb1900060); /* sys_cpupll */ + au_writel(0x00, 0xb1900064); /* sys_auxpll */ + au_writel(0x00, 0xb1900100); /* sys_pininputen */ + break; + } + + set_c0_status(ST0_BEV | ST0_ERL); + change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED); + flush_cache_all(); + write_c0_wired(0); + + /* Give board a chance to do a hardware reset */ + board_reset(); + + /* Jump to the beggining in case board_reset() is empty */ + __asm__ __volatile__("jr\t%0"::"r"(0xbfc00000)); +} + +void au1000_halt(void) +{ +#if defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550) + /* Power off system */ + printk(KERN_NOTICE "\n** Powering off...\n"); + au_writew(au_readw(0xAF00001C) | (3 << 14), 0xAF00001C); + au_sync(); + while (1); /* should not get here */ +#else + printk(KERN_NOTICE "\n** You can safely turn off the power\n"); +#ifdef CONFIG_MIPS_MIRAGE + au_writel((1 << 26) | (1 << 10), GPIO2_OUTPUT); +#endif +#ifdef CONFIG_MIPS_DB1200 + au_writew(au_readw(0xB980001C) | (1 << 14), 0xB980001C); +#endif +#ifdef CONFIG_PM + au_sleep(); + + /* Should not get here */ + printk(KERN_ERR "Unable to put CPU in sleep mode\n"); + while (1); +#else + while (1) + __asm__(".set\tmips3\n\t" + "wait\n\t" + ".set\tmips0"); +#endif +#endif /* defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550) */ +} + +void au1000_power_off(void) +{ + au1000_halt(); +} diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c new file mode 100644 index 0000000..1ac6b06 --- /dev/null +++ b/arch/mips/alchemy/common/setup.c @@ -0,0 +1,160 @@ +/* + * Copyright 2000, 2007-2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com + * + * Updates to 2.6, Pete Popov, Embedded Alley Solutions, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/module.h> +#include <linux/pm.h> + +#include <asm/mipsregs.h> +#include <asm/reboot.h> +#include <asm/time.h> + +#include <au1000.h> +#include <prom.h> + +extern void __init board_setup(void); +extern void au1000_restart(char *); +extern void au1000_halt(void); +extern void au1000_power_off(void); +extern void set_cpuspec(void); + +void __init plat_mem_setup(void) +{ + struct cpu_spec *sp; + char *argptr; + unsigned long prid, cpufreq, bclk; + + set_cpuspec(); + sp = cur_cpu_spec[0]; + + board_setup(); /* board specific setup */ + + prid = read_c0_prid(); + if (sp->cpu_pll_wo) +#ifdef CONFIG_SOC_AU1000_FREQUENCY + cpufreq = CONFIG_SOC_AU1000_FREQUENCY / 1000000; +#else + cpufreq = 396; +#endif + else + cpufreq = (au_readl(SYS_CPUPLL) & 0x3F) * 12; + printk(KERN_INFO "(PRID %08lx) @ %ld MHz\n", prid, cpufreq); + + if (sp->cpu_bclk) { + /* Enable BCLK switching */ + bclk = au_readl(SYS_POWERCTRL); + au_writel(bclk | 0x60, SYS_POWERCTRL); + printk(KERN_INFO "BCLK switching enabled!\n"); + } + + if (sp->cpu_od) + /* Various early Au1xx0 errata corrected by this */ + set_c0_config(1 << 19); /* Set Config[OD] */ + else + /* Clear to obtain best system bus performance */ + clear_c0_config(1 << 19); /* Clear Config[OD] */ + + argptr = prom_getcmdline(); + +#ifdef CONFIG_SERIAL_8250_CONSOLE + argptr = strstr(argptr, "console="); + if (argptr == NULL) { + argptr = prom_getcmdline(); + strcat(argptr, " console=ttyS0,115200"); + } +#endif + +#ifdef CONFIG_FB_AU1100 + argptr = strstr(argptr, "video="); + if (argptr == NULL) { + argptr = prom_getcmdline(); + /* default panel */ + /*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/ + } +#endif + +#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000) + /* au1000 does not support vra, au1500 and au1100 do */ + strcat(argptr, " au1000_audio=vra"); + argptr = prom_getcmdline(); +#endif + _machine_restart = au1000_restart; + _machine_halt = au1000_halt; + pm_power_off = au1000_power_off; + + /* IO/MEM resources. */ + set_io_port_base(0); + ioport_resource.start = IOPORT_RESOURCE_START; + ioport_resource.end = IOPORT_RESOURCE_END; + iomem_resource.start = IOMEM_RESOURCE_START; + iomem_resource.end = IOMEM_RESOURCE_END; + + while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_E0S); + au_writel(SYS_CNTRL_E0 | SYS_CNTRL_EN0, SYS_COUNTER_CNTRL); + au_sync(); + while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T0S); + au_writel(0, SYS_TOYTRIM); +} + +#if defined(CONFIG_64BIT_PHYS_ADDR) +/* This routine should be valid for all Au1x based boards */ +phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size) +{ + /* Don't fixup 36-bit addresses */ + if ((phys_addr >> 32) != 0) + return phys_addr; + +#ifdef CONFIG_PCI + { + u32 start = (u32)Au1500_PCI_MEM_START; + u32 end = (u32)Au1500_PCI_MEM_END; + + /* Check for PCI memory window */ + if (phys_addr >= start && (phys_addr + size - 1) <= end) + return (phys_t) + ((phys_addr - start) + Au1500_PCI_MEM_START); + } +#endif + + /* + * All Au1xx0 SOCs have a PCMCIA controller. + * We setup our 32-bit pseudo addresses to be equal to the + * 36-bit addr >> 4, to make it easier to check the address + * and fix it. + * The PCMCIA socket 0 physical attribute address is 0xF 4000 0000. + * The pseudo address we use is 0xF400 0000. Any address over + * 0xF400 0000 is a PCMCIA pseudo address. + */ + if ((phys_addr >= 0xF4000000) && (phys_addr < 0xFFFFFFFF)) + return (phys_t)(phys_addr << 4); + + /* default nop */ + return phys_addr; +} +EXPORT_SYMBOL(__fixup_bigphys_addr); +#endif diff --git a/arch/mips/alchemy/common/sleeper.S b/arch/mips/alchemy/common/sleeper.S new file mode 100644 index 0000000..3006e27 --- /dev/null +++ b/arch/mips/alchemy/common/sleeper.S @@ -0,0 +1,154 @@ +/* + * Copyright 2002 Embedded Edge, LLC + * Author: dan@embeddededge.com + * + * Sleep helper for Au1xxx sleep mode. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <asm/asm.h> +#include <asm/mipsregs.h> +#include <asm/regdef.h> +#include <asm/stackframe.h> + + .text + .set macro + .set noat + .align 5 + +/* Save all of the processor general registers and go to sleep. + * A wakeup condition will get us back here to restore the registers. + */ +LEAF(save_and_sleep) + + subu sp, PT_SIZE + sw $1, PT_R1(sp) + sw $2, PT_R2(sp) + sw $3, PT_R3(sp) + sw $4, PT_R4(sp) + sw $5, PT_R5(sp) + sw $6, PT_R6(sp) + sw $7, PT_R7(sp) + sw $8, PT_R8(sp) + sw $9, PT_R9(sp) + sw $10, PT_R10(sp) + sw $11, PT_R11(sp) + sw $12, PT_R12(sp) + sw $13, PT_R13(sp) + sw $14, PT_R14(sp) + sw $15, PT_R15(sp) + sw $16, PT_R16(sp) + sw $17, PT_R17(sp) + sw $18, PT_R18(sp) + sw $19, PT_R19(sp) + sw $20, PT_R20(sp) + sw $21, PT_R21(sp) + sw $22, PT_R22(sp) + sw $23, PT_R23(sp) + sw $24, PT_R24(sp) + sw $25, PT_R25(sp) + sw $26, PT_R26(sp) + sw $27, PT_R27(sp) + sw $28, PT_R28(sp) + sw $29, PT_R29(sp) + sw $30, PT_R30(sp) + sw $31, PT_R31(sp) + mfc0 k0, CP0_STATUS + sw k0, 0x20(sp) + mfc0 k0, CP0_CONTEXT + sw k0, 0x1c(sp) + mfc0 k0, CP0_PAGEMASK + sw k0, 0x18(sp) + mfc0 k0, CP0_CONFIG + sw k0, 0x14(sp) + + /* Now set up the scratch registers so the boot rom will + * return to this point upon wakeup. + */ + la k0, 1f + lui k1, 0xb190 + ori k1, 0x18 + sw sp, 0(k1) + ori k1, 0x1c + sw k0, 0(k1) + +/* Put SDRAM into self refresh. Preload instructions into cache, + * issue a precharge, then auto refresh, then sleep commands to it. + */ + la t0, sdsleep + .set mips3 + cache 0x14, 0(t0) + cache 0x14, 32(t0) + cache 0x14, 64(t0) + cache 0x14, 96(t0) + .set mips0 + +sdsleep: + lui k0, 0xb400 + sw zero, 0x001c(k0) /* Precharge */ + sw zero, 0x0020(k0) /* Auto refresh */ + sw zero, 0x0030(k0) /* SDRAM sleep */ + sync + + lui k1, 0xb190 + sw zero, 0x0078(k1) /* get ready to sleep */ + sync + sw zero, 0x007c(k1) /* Put processor to sleep */ + sync + + /* This is where we return upon wakeup. + * Reload all of the registers and return. + */ +1: nop + lw k0, 0x20(sp) + mtc0 k0, CP0_STATUS + lw k0, 0x1c(sp) + mtc0 k0, CP0_CONTEXT + lw k0, 0x18(sp) + mtc0 k0, CP0_PAGEMASK + lw k0, 0x14(sp) + mtc0 k0, CP0_CONFIG + + /* We need to catch the ealry Alchemy SOCs with + * the write-only Config[OD] bit and set it back to one... + */ + jal au1x00_fixup_config_od + lw $1, PT_R1(sp) + lw $2, PT_R2(sp) + lw $3, PT_R3(sp) + lw $4, PT_R4(sp) + lw $5, PT_R5(sp) + lw $6, PT_R6(sp) + lw $7, PT_R7(sp) + lw $8, PT_R8(sp) + lw $9, PT_R9(sp) + lw $10, PT_R10(sp) + lw $11, PT_R11(sp) + lw $12, PT_R12(sp) + lw $13, PT_R13(sp) + lw $14, PT_R14(sp) + lw $15, PT_R15(sp) + lw $16, PT_R16(sp) + lw $17, PT_R17(sp) + lw $18, PT_R18(sp) + lw $19, PT_R19(sp) + lw $20, PT_R20(sp) + lw $21, PT_R21(sp) + lw $22, PT_R22(sp) + lw $23, PT_R23(sp) + lw $24, PT_R24(sp) + lw $25, PT_R25(sp) + lw $26, PT_R26(sp) + lw $27, PT_R27(sp) + lw $28, PT_R28(sp) + lw $29, PT_R29(sp) + lw $30, PT_R30(sp) + lw $31, PT_R31(sp) + addiu sp, PT_SIZE + + jr ra +END(save_and_sleep) diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c new file mode 100644 index 0000000..563d939 --- /dev/null +++ b/arch/mips/alchemy/common/time.c @@ -0,0 +1,266 @@ +/* + * + * Copyright (C) 2001, 2006, 2008 MontaVista Software, <source@mvista.com> + * Copied and modified Carsten Langgaard's time.c + * + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + * + * Setting up the clock on the MIPS boards. + * + * We provide the clock interrupt processing and the timer offset compute + * functions. If CONFIG_PM is selected, we also ensure the 32KHz timer is + * available. -- Dan + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/spinlock.h> + +#include <asm/mipsregs.h> +#include <asm/time.h> +#include <asm/mach-au1x00/au1000.h> + +static int no_au1xxx_32khz; +extern int allow_au1k_wait; /* default off for CP0 Counter */ + +#ifdef CONFIG_PM +#if HZ < 100 || HZ > 1000 +#error "unsupported HZ value! Must be in [100,1000]" +#endif +#define MATCH20_INC (328 * 100 / HZ) /* magic number 328 is for HZ=100... */ +static unsigned long last_pc0, last_match20; +#endif + +static DEFINE_SPINLOCK(time_lock); + +unsigned long wtimer; + +#ifdef CONFIG_PM +static irqreturn_t counter0_irq(int irq, void *dev_id) +{ + unsigned long pc0; + int time_elapsed; + static int jiffie_drift; + + if (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20) { + /* should never happen! */ + printk(KERN_WARNING "counter 0 w status error\n"); + return IRQ_NONE; + } + + pc0 = au_readl(SYS_TOYREAD); + if (pc0 < last_match20) + /* counter overflowed */ + time_elapsed = (0xffffffff - last_match20) + pc0; + else + time_elapsed = pc0 - last_match20; + + while (time_elapsed > 0) { + do_timer(1); +#ifndef CONFIG_SMP + update_process_times(user_mode(get_irq_regs())); +#endif + time_elapsed -= MATCH20_INC; + last_match20 += MATCH20_INC; + jiffie_drift++; + } + + last_pc0 = pc0; + au_writel(last_match20 + MATCH20_INC, SYS_TOYMATCH2); + au_sync(); + + /* + * Our counter ticks at 10.009765625 ms/tick, we we're running + * almost 10 uS too slow per tick. + */ + + if (jiffie_drift >= 999) { + jiffie_drift -= 999; + do_timer(1); /* increment jiffies by one */ +#ifndef CONFIG_SMP + update_process_times(user_mode(get_irq_regs())); +#endif + } + + return IRQ_HANDLED; +} + +struct irqaction counter0_action = { + .handler = counter0_irq, + .flags = IRQF_DISABLED, + .name = "alchemy-toy", + .dev_id = NULL, +}; + +/* When we wakeup from sleep, we have to "catch up" on all of the + * timer ticks we have missed. + */ +void wakeup_counter0_adjust(void) +{ + unsigned long pc0; + int time_elapsed; + + pc0 = au_readl(SYS_TOYREAD); + if (pc0 < last_match20) + /* counter overflowed */ + time_elapsed = (0xffffffff - last_match20) + pc0; + else + time_elapsed = pc0 - last_match20; + + while (time_elapsed > 0) { + time_elapsed -= MATCH20_INC; + last_match20 += MATCH20_INC; + } + + last_pc0 = pc0; + au_writel(last_match20 + MATCH20_INC, SYS_TOYMATCH2); + au_sync(); + +} + +/* This is just for debugging to set the timer for a sleep delay. */ +void wakeup_counter0_set(int ticks) +{ + unsigned long pc0; + + pc0 = au_readl(SYS_TOYREAD); + last_pc0 = pc0; + au_writel(last_match20 + (MATCH20_INC * ticks), SYS_TOYMATCH2); + au_sync(); +} +#endif + +/* + * I haven't found anyone that doesn't use a 12 MHz source clock, + * but just in case..... + */ +#define AU1000_SRC_CLK 12000000 + +/* + * We read the real processor speed from the PLL. This is important + * because it is more accurate than computing it from the 32 KHz + * counter, if it exists. If we don't have an accurate processor + * speed, all of the peripherals that derive their clocks based on + * this advertised speed will introduce error and sometimes not work + * properly. This function is futher convoluted to still allow configurations + * to do that in case they have really, really old silicon with a + * write-only PLL register, that we need the 32 KHz when power management + * "wait" is enabled, and we need to detect if the 32 KHz isn't present + * but requested......got it? :-) -- Dan + */ +unsigned long calc_clock(void) +{ + unsigned long cpu_speed; + unsigned long flags; + unsigned long counter; + + spin_lock_irqsave(&time_lock, flags); + + /* Power management cares if we don't have a 32 KHz counter. */ + no_au1xxx_32khz = 0; + counter = au_readl(SYS_COUNTER_CNTRL); + if (counter & SYS_CNTRL_E0) { + int trim_divide = 16; + + au_writel(counter | SYS_CNTRL_EN1, SYS_COUNTER_CNTRL); + + while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S); + /* RTC now ticks at 32.768/16 kHz */ + au_writel(trim_divide - 1, SYS_RTCTRIM); + while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S); + + while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S); + au_writel(0, SYS_TOYWRITE); + while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S); + } else + no_au1xxx_32khz = 1; + + /* + * On early Au1000, sys_cpupll was write-only. Since these + * silicon versions of Au1000 are not sold by AMD, we don't bend + * over backwards trying to determine the frequency. + */ + if (cur_cpu_spec[0]->cpu_pll_wo) +#ifdef CONFIG_SOC_AU1000_FREQUENCY + cpu_speed = CONFIG_SOC_AU1000_FREQUENCY; +#else + cpu_speed = 396000000; +#endif + else + cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) * AU1000_SRC_CLK; + /* On Alchemy CPU:counter ratio is 1:1 */ + mips_hpt_frequency = cpu_speed; + /* Equation: Baudrate = CPU / (SD * 2 * CLKDIV * 16) */ + set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL) + & 0x03) + 2) * 16)); + spin_unlock_irqrestore(&time_lock, flags); + return cpu_speed; +} + +void __init plat_time_init(void) +{ + unsigned int est_freq = calc_clock(); + + est_freq += 5000; /* round */ + est_freq -= est_freq%10000; + printk(KERN_INFO "CPU frequency %u.%02u MHz\n", + est_freq / 1000000, ((est_freq % 1000000) * 100) / 1000000); + set_au1x00_speed(est_freq); + set_au1x00_lcd_clock(); /* program the LCD clock */ + +#ifdef CONFIG_PM + /* + * setup counter 0, since it keeps ticking after a + * 'wait' instruction has been executed. The CP0 timer and + * counter 1 do NOT continue running after 'wait' + * + * It's too early to call request_irq() here, so we handle + * counter 0 interrupt as a special irq and it doesn't show + * up under /proc/interrupts. + * + * Check to ensure we really have a 32 KHz oscillator before + * we do this. + */ + if (no_au1xxx_32khz) + printk(KERN_WARNING "WARNING: no 32KHz clock found.\n"); + else { + while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C0S); + au_writel(0, SYS_TOYWRITE); + while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C0S); + + au_writel(au_readl(SYS_WAKEMSK) | (1 << 8), SYS_WAKEMSK); + au_writel(~0, SYS_WAKESRC); + au_sync(); + while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20); + + /* Setup match20 to interrupt once every HZ */ + last_pc0 = last_match20 = au_readl(SYS_TOYREAD); + au_writel(last_match20 + MATCH20_INC, SYS_TOYMATCH2); + au_sync(); + while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20); + setup_irq(AU1000_TOY_MATCH2_INT, &counter0_action); + + /* We can use the real 'wait' instruction. */ + allow_au1k_wait = 1; + } + +#endif +} diff --git a/arch/mips/alchemy/db1x00/Makefile b/arch/mips/alchemy/db1x00/Makefile new file mode 100644 index 0000000..274db3b --- /dev/null +++ b/arch/mips/alchemy/db1x00/Makefile @@ -0,0 +1,8 @@ +# +# Copyright 2000, 2008 MontaVista Software Inc. +# Author: MontaVista Software, Inc. <source@mvista.com> +# +# Makefile for the Alchemy Semiconductor DBAu1xx0 boards. +# + +lib-y := init.o board_setup.o irqmap.o diff --git a/arch/mips/alchemy/db1x00/board_setup.c b/arch/mips/alchemy/db1x00/board_setup.c new file mode 100644 index 0000000..9e5ccbb --- /dev/null +++ b/arch/mips/alchemy/db1x00/board_setup.c @@ -0,0 +1,108 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * Alchemy Db1x00 board setup. + * + * Copyright 2000, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> + +#include <asm/mach-au1x00/au1000.h> +#include <asm/mach-db1x00/db1x00.h> + +static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; + +void board_reset(void) +{ + /* Hit BCSR.SW_RESET[RESET] */ + bcsr->swreset = 0x0000; +} + +void __init board_setup(void) +{ + u32 pin_func = 0; + + /* Not valid for Au1550 */ +#if defined(CONFIG_IRDA) && \ + (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100)) + /* Set IRFIRSEL instead of GPIO15 */ + pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF; + au_writel(pin_func, SYS_PINFUNC); + /* Power off until the driver is in use */ + bcsr->resets &= ~BCSR_RESETS_IRDA_MODE_MASK; + bcsr->resets |= BCSR_RESETS_IRDA_MODE_OFF; + au_sync(); +#endif + bcsr->pcmcia = 0x0000; /* turn off PCMCIA power */ + +#ifdef CONFIG_MIPS_MIRAGE + /* Enable GPIO[31:0] inputs */ + au_writel(0, SYS_PININPUTEN); + + /* GPIO[20] is output, tristate the other input primary GPIOs */ + au_writel(~(1 << 20), SYS_TRIOUTCLR); + + /* Set GPIO[210:208] instead of SSI_0 */ + pin_func = au_readl(SYS_PINFUNC) | SYS_PF_S0; + + /* Set GPIO[215:211] for LEDs */ + pin_func |= 5 << 2; + + /* Set GPIO[214:213] for more LEDs */ + pin_func |= 5 << 12; + + /* Set GPIO[207:200] instead of PCMCIA/LCD */ + pin_func |= SYS_PF_LCD | SYS_PF_PC; + au_writel(pin_func, SYS_PINFUNC); + + /* + * Enable speaker amplifier. This should + * be part of the audio driver. + */ + au_writel(au_readl(GPIO2_DIR) | 0x200, GPIO2_DIR); + au_writel(0x02000200, GPIO2_OUTPUT); +#endif + + au_sync(); + +#ifdef CONFIG_MIPS_DB1000 + printk(KERN_INFO "AMD Alchemy Au1000/Db1000 Board\n"); +#endif +#ifdef CONFIG_MIPS_DB1500 + printk(KERN_INFO "AMD Alchemy Au1500/Db1500 Board\n"); +#endif +#ifdef CONFIG_MIPS_DB1100 + printk(KERN_INFO "AMD Alchemy Au1100/Db1100 Board\n"); +#endif +#ifdef CONFIG_MIPS_BOSPORUS + printk(KERN_INFO "AMD Alchemy Bosporus Board\n"); +#endif +#ifdef CONFIG_MIPS_MIRAGE + printk(KERN_INFO "AMD Alchemy Mirage Board\n"); +#endif +#ifdef CONFIG_MIPS_DB1550 + printk(KERN_INFO "AMD Alchemy Au1550/Db1550 Board\n"); +#endif +} diff --git a/arch/mips/alchemy/db1x00/init.c b/arch/mips/alchemy/db1x00/init.c new file mode 100644 index 0000000..8474135 --- /dev/null +++ b/arch/mips/alchemy/db1x00/init.c @@ -0,0 +1,62 @@ +/* + * BRIEF MODULE DESCRIPTION + * PB1000 board setup + * + * Copyright 2001, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <linux/kernel.h> + +#include <asm/bootinfo.h> + +#include <prom.h> + +const char *get_system_type(void) +{ +#ifdef CONFIG_MIPS_BOSPORUS + return "Alchemy Bosporus Gateway Reference"; +#else + return "Alchemy Db1x00"; +#endif +} + +void __init prom_init(void) +{ + unsigned char *memsize_str; + unsigned long memsize; + + prom_argc = fw_arg0; + prom_argv = (char **)fw_arg1; + prom_envp = (char **)fw_arg2; + + prom_init_cmdline(); + + memsize_str = prom_getenv("memsize"); + if (!memsize_str) + memsize = 0x04000000; + else + strict_strtol(memsize_str, 0, &memsize); + add_memory_region(0, memsize, BOOT_MEM_RAM); +} diff --git a/arch/mips/alchemy/db1x00/irqmap.c b/arch/mips/alchemy/db1x00/irqmap.c new file mode 100644 index 0000000..94c090e --- /dev/null +++ b/arch/mips/alchemy/db1x00/irqmap.c @@ -0,0 +1,86 @@ +/* + * BRIEF MODULE DESCRIPTION + * Au1xxx irq map table + * + * Copyright 2003 Embedded Edge, LLC + * dan@embeddededge.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> + +#include <asm/mach-au1x00/au1000.h> + +#ifdef CONFIG_MIPS_DB1500 +char irq_tab_alchemy[][5] __initdata = { + [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT371 */ + [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */ +}; +#endif + +#ifdef CONFIG_MIPS_BOSPORUS +char irq_tab_alchemy[][5] __initdata = { + [11] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 11 - miniPCI */ + [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - SN1741 */ + [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */ +}; +#endif + +#ifdef CONFIG_MIPS_MIRAGE +char irq_tab_alchemy[][5] __initdata = { + [11] = { -1, INTD, INTX, INTX, INTX }, /* IDSEL 11 - SMI VGX */ + [12] = { -1, INTX, INTX, INTC, INTX }, /* IDSEL 12 - PNX1300 */ + [13] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 13 - miniPCI */ +}; +#endif + +#ifdef CONFIG_MIPS_DB1550 +char irq_tab_alchemy[][5] __initdata = { + [11] = { -1, INTC, INTX, INTX, INTX }, /* IDSEL 11 - on-board HPT371 */ + [12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */ + [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */ +}; +#endif + + +struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { + +#ifndef CONFIG_MIPS_MIRAGE +#ifdef CONFIG_MIPS_DB1550 + { AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 IRQ# */ + { AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 IRQ# */ +#else + { AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 Fully_Interted# */ + { AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 STSCHG# */ + { AU1000_GPIO_2, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 IRQ# */ + + { AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 Fully_Interted# */ + { AU1000_GPIO_4, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 STSCHG# */ + { AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 IRQ# */ +#endif +#else + { AU1000_GPIO_7, INTC_INT_RISE_EDGE, 0 }, /* touchscreen pen down */ +#endif + +}; + +int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map); diff --git a/arch/mips/alchemy/mtx-1/Makefile b/arch/mips/alchemy/mtx-1/Makefile new file mode 100644 index 0000000..7c67b3d --- /dev/null +++ b/arch/mips/alchemy/mtx-1/Makefile @@ -0,0 +1,12 @@ +# +# Copyright 2003 MontaVista Software Inc. +# Author: MontaVista Software, Inc. <source@mvista.com> +# Bruno Randolf <bruno.randolf@4g-systems.biz> +# +# Makefile for 4G Systems MTX-1 board. +# + +lib-y := init.o board_setup.o irqmap.o +obj-y := platform.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/mips/alchemy/mtx-1/board_setup.c b/arch/mips/alchemy/mtx-1/board_setup.c new file mode 100644 index 0000000..3f80791 --- /dev/null +++ b/arch/mips/alchemy/mtx-1/board_setup.c @@ -0,0 +1,98 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * 4G Systems MTX-1 board setup. + * + * Copyright 2003, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> + * Bruno Randolf <bruno.randolf@4g-systems.biz> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> + +#include <asm/mach-au1x00/au1000.h> + +extern int (*board_pci_idsel)(unsigned int devsel, int assert); +int mtx1_pci_idsel(unsigned int devsel, int assert); + +void board_reset(void) +{ + /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */ + au_writel(0x00000000, 0xAE00001C); +} + +void __init board_setup(void) +{ +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) + /* Enable USB power switch */ + au_writel(au_readl(GPIO2_DIR) | 0x10, GPIO2_DIR); + au_writel(0x100000, GPIO2_OUTPUT); +#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */ + +#ifdef CONFIG_PCI +#if defined(__MIPSEB__) + au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG); +#else + au_writel(0xf, Au1500_PCI_CFG); +#endif +#endif + + /* Initialize sys_pinfunc */ + au_writel(SYS_PF_NI2, SYS_PINFUNC); + + /* Initialize GPIO */ + au_writel(0xFFFFFFFF, SYS_TRIOUTCLR); + au_writel(0x00000001, SYS_OUTPUTCLR); /* set M66EN (PCI 66MHz) to OFF */ + au_writel(0x00000008, SYS_OUTPUTSET); /* set PCI CLKRUN# to OFF */ + au_writel(0x00000002, SYS_OUTPUTSET); /* set EXT_IO3 ON */ + au_writel(0x00000020, SYS_OUTPUTCLR); /* set eth PHY TX_ER to OFF */ + + /* Enable LED and set it to green */ + au_writel(au_readl(GPIO2_DIR) | 0x1800, GPIO2_DIR); + au_writel(0x18000800, GPIO2_OUTPUT); + + board_pci_idsel = mtx1_pci_idsel; + + printk(KERN_INFO "4G Systems MTX-1 Board\n"); +} + +int +mtx1_pci_idsel(unsigned int devsel, int assert) +{ +#define MTX_IDSEL_ONLY_0_AND_3 0 +#if MTX_IDSEL_ONLY_0_AND_3 + if (devsel != 0 && devsel != 3) { + printk(KERN_ERR "*** not 0 or 3\n"); + return 0; + } +#endif + + if (assert && devsel != 0) + /* Suppress signal to Cardbus */ + au_writel(0x00000002, SYS_OUTPUTCLR); /* set EXT_IO3 OFF */ + else + au_writel(0x00000002, SYS_OUTPUTSET); /* set EXT_IO3 ON */ + au_sync_udelay(1); + return 1; +} + diff --git a/arch/mips/alchemy/mtx-1/init.c b/arch/mips/alchemy/mtx-1/init.c new file mode 100644 index 0000000..3bae13c --- /dev/null +++ b/arch/mips/alchemy/mtx-1/init.c @@ -0,0 +1,60 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * 4G Systems MTX-1 board setup + * + * Copyright 2003, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> + * Bruno Randolf <bruno.randolf@4g-systems.biz> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/kernel.h> +#include <linux/init.h> + +#include <asm/bootinfo.h> + +#include <prom.h> + +const char *get_system_type(void) +{ + return "MTX-1"; +} + +void __init prom_init(void) +{ + unsigned char *memsize_str; + unsigned long memsize; + + prom_argc = fw_arg0; + prom_argv = (char **)fw_arg1; + prom_envp = (char **)fw_arg2; + + prom_init_cmdline(); + + memsize_str = prom_getenv("memsize"); + if (!memsize_str) + memsize = 0x04000000; + else + strict_strtol(memsize_str, 0, &memsize); + add_memory_region(0, memsize, BOOT_MEM_RAM); +} diff --git a/arch/mips/alchemy/mtx-1/irqmap.c b/arch/mips/alchemy/mtx-1/irqmap.c new file mode 100644 index 0000000..f2bf029 --- /dev/null +++ b/arch/mips/alchemy/mtx-1/irqmap.c @@ -0,0 +1,52 @@ +/* + * BRIEF MODULE DESCRIPTION + * Au1xxx irq map table + * + * Copyright 2003 Embedded Edge, LLC + * dan@embeddededge.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> + +#include <asm/mach-au1x00/au1000.h> + +char irq_tab_alchemy[][5] __initdata = { + [0] = { -1, INTA, INTA, INTX, INTX }, /* IDSEL 00 - AdapterA-Slot0 (top) */ + [1] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */ + [2] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 02 - AdapterB-Slot0 (top) */ + [3] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */ + [4] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 04 - AdapterC-Slot0 (top) */ + [5] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */ + [6] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 06 - AdapterD-Slot0 (top) */ + [7] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */ +}; + +struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { + { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 }, + { AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 }, + { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 }, + { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 }, + { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 }, +}; + +int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map); diff --git a/arch/mips/alchemy/mtx-1/platform.c b/arch/mips/alchemy/mtx-1/platform.c new file mode 100644 index 0000000..8b5914d --- /dev/null +++ b/arch/mips/alchemy/mtx-1/platform.c @@ -0,0 +1,149 @@ +/* + * MTX-1 platform devices registration + * + * Copyright (C) 2007, Florian Fainelli <florian@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/leds.h> +#include <linux/gpio.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <mtd/mtd-abi.h> + +static struct gpio_keys_button mtx1_gpio_button[] = { + { + .gpio = 207, + .code = BTN_0, + .desc = "System button", + } +}; + +static struct gpio_keys_platform_data mtx1_buttons_data = { + .buttons = mtx1_gpio_button, + .nbuttons = ARRAY_SIZE(mtx1_gpio_button), +}; + +static struct platform_device mtx1_button = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &mtx1_buttons_data, + } +}; + +static struct resource mtx1_wdt_res[] = { + [0] = { + .start = 15, + .end = 15, + .name = "mtx1-wdt-gpio", + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device mtx1_wdt = { + .name = "mtx1-wdt", + .id = 0, + .num_resources = ARRAY_SIZE(mtx1_wdt_res), + .resource = mtx1_wdt_res, +}; + +static struct gpio_led default_leds[] = { + { + .name = "mtx1:green", + .gpio = 211, + }, { + .name = "mtx1:red", + .gpio = 212, + }, +}; + +static struct gpio_led_platform_data mtx1_led_data = { + .num_leds = ARRAY_SIZE(default_leds), + .leds = default_leds, +}; + +static struct platform_device mtx1_gpio_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &mtx1_led_data, + } +}; + +static struct mtd_partition mtx1_mtd_partitions[] = { + { + .name = "filesystem", + .size = 0x01C00000, + .offset = 0, + }, + { + .name = "yamon", + .size = 0x00100000, + .offset = MTDPART_OFS_APPEND, + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "kernel", + .size = 0x002c0000, + .offset = MTDPART_OFS_APPEND, + }, + { + .name = "yamon env", + .size = 0x00040000, + .offset = MTDPART_OFS_APPEND, + }, +}; + +static struct physmap_flash_data mtx1_flash_data = { + .width = 4, + .nr_parts = 4, + .parts = mtx1_mtd_partitions, +}; + +static struct resource mtx1_mtd_resource = { + .start = 0x1e000000, + .end = 0x1fffffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device mtx1_mtd = { + .name = "physmap-flash", + .dev = { + .platform_data = &mtx1_flash_data, + }, + .num_resources = 1, + .resource = &mtx1_mtd_resource, +}; + +static struct __initdata platform_device * mtx1_devs[] = { + &mtx1_gpio_leds, + &mtx1_wdt, + &mtx1_button, + &mtx1_mtd, +}; + +static int __init mtx1_register_devices(void) +{ + gpio_direction_input(207); + return platform_add_devices(mtx1_devs, ARRAY_SIZE(mtx1_devs)); +} + +arch_initcall(mtx1_register_devices); diff --git a/arch/mips/alchemy/pb1000/Makefile b/arch/mips/alchemy/pb1000/Makefile new file mode 100644 index 0000000..99bbec0 --- /dev/null +++ b/arch/mips/alchemy/pb1000/Makefile @@ -0,0 +1,8 @@ +# +# Copyright 2000, 2008 MontaVista Software Inc. +# Author: MontaVista Software, Inc. <source@mvista.com> +# +# Makefile for the Alchemy Semiconductor Pb1000 board. +# + +lib-y := init.o board_setup.o irqmap.o diff --git a/arch/mips/alchemy/pb1000/board_setup.c b/arch/mips/alchemy/pb1000/board_setup.c new file mode 100644 index 0000000..25df167 --- /dev/null +++ b/arch/mips/alchemy/pb1000/board_setup.c @@ -0,0 +1,165 @@ +/* + * Copyright 2000, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <linux/delay.h> + +#include <asm/mach-au1x00/au1000.h> +#include <asm/mach-pb1x00/pb1000.h> + +void board_reset(void) +{ +} + +void __init board_setup(void) +{ + u32 pin_func, static_cfg0; + u32 sys_freqctrl, sys_clksrc; + u32 prid = read_c0_prid(); + + /* Set AUX clock to 12 MHz * 8 = 96 MHz */ + au_writel(8, SYS_AUXPLL); + au_writel(0, SYS_PINSTATERD); + udelay(100); + +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) + /* Zero and disable FREQ2 */ + sys_freqctrl = au_readl(SYS_FREQCTRL0); + sys_freqctrl &= ~0xFFF00000; + au_writel(sys_freqctrl, SYS_FREQCTRL0); + + /* Zero and disable USBH/USBD clocks */ + sys_clksrc = au_readl(SYS_CLKSRC); + sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK | + SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK); + au_writel(sys_clksrc, SYS_CLKSRC); + + sys_freqctrl = au_readl(SYS_FREQCTRL0); + sys_freqctrl &= ~0xFFF00000; + + sys_clksrc = au_readl(SYS_CLKSRC); + sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK | + SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK); + + switch (prid & 0x000000FF) { + case 0x00: /* DA */ + case 0x01: /* HA */ + case 0x02: /* HB */ + /* CPU core freq to 48 MHz to slow it way down... */ + au_writel(4, SYS_CPUPLL); + + /* + * Setup 48 MHz FREQ2 from CPUPLL for USB Host + * FRDIV2 = 3 -> div by 8 of 384 MHz -> 48 MHz + */ + sys_freqctrl |= (3 << SYS_FC_FRDIV2_BIT) | SYS_FC_FE2; + au_writel(sys_freqctrl, SYS_FREQCTRL0); + + /* CPU core freq to 384 MHz */ + au_writel(0x20, SYS_CPUPLL); + + printk(KERN_INFO "Au1000: 48 MHz OHCI workaround enabled\n"); + break; + + default: /* HC and newer */ + /* FREQ2 = aux / 2 = 48 MHz */ + sys_freqctrl |= (0 << SYS_FC_FRDIV2_BIT) | + SYS_FC_FE2 | SYS_FC_FS2; + au_writel(sys_freqctrl, SYS_FREQCTRL0); + break; + } + + /* + * Route 48 MHz FREQ2 into USB Host and/or Device + */ + sys_clksrc |= SYS_CS_MUX_FQ2 << SYS_CS_MUH_BIT; + au_writel(sys_clksrc, SYS_CLKSRC); + + /* Configure pins GPIO[14:9] as GPIO */ + pin_func = au_readl(SYS_PINFUNC) & ~(SYS_PF_UR3 | SYS_PF_USB); + + /* 2nd USB port is USB host */ + pin_func |= SYS_PF_USB; + + au_writel(pin_func, SYS_PINFUNC); + au_writel(0x2800, SYS_TRIOUTCLR); + au_writel(0x0030, SYS_OUTPUTCLR); +#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */ + + /* Make GPIO 15 an input (for interrupt line) */ + pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_IRF; + /* We don't need I2S, so make it available for GPIO[31:29] */ + pin_func |= SYS_PF_I2S; + au_writel(pin_func, SYS_PINFUNC); + + au_writel(0x8000, SYS_TRIOUTCLR); + + static_cfg0 = au_readl(MEM_STCFG0) & ~0xc00; + au_writel(static_cfg0, MEM_STCFG0); + + /* configure RCE2* for LCD */ + au_writel(0x00000004, MEM_STCFG2); + + /* MEM_STTIME2 */ + au_writel(0x09000000, MEM_STTIME2); + + /* Set 32-bit base address decoding for RCE2* */ + au_writel(0x10003ff0, MEM_STADDR2); + + /* + * PCI CPLD setup + * Expand CE0 to cover PCI + */ + au_writel(0x11803e40, MEM_STADDR1); + + /* Burst visibility on */ + au_writel(au_readl(MEM_STCFG0) | 0x1000, MEM_STCFG0); + + au_writel(0x83, MEM_STCFG1); /* ewait enabled, flash timing */ + au_writel(0x33030a10, MEM_STTIME1); /* slower timing for FPGA */ + + /* Setup the static bus controller */ + au_writel(0x00000002, MEM_STCFG3); /* type = PCMCIA */ + au_writel(0x280E3D07, MEM_STTIME3); /* 250ns cycle time */ + au_writel(0x10000000, MEM_STADDR3); /* any PCMCIA select */ + + /* + * Enable Au1000 BCLK switching - note: sed1356 must not use + * its BCLK (Au1000 LCLK) for any timings + */ + switch (prid & 0x000000FF) { + case 0x00: /* DA */ + case 0x01: /* HA */ + case 0x02: /* HB */ + break; + default: /* HC and newer */ + /* + * Enable sys bus clock divider when IDLE state or no bus + * activity. + */ + au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL); + break; + } +} diff --git a/arch/mips/alchemy/pb1000/init.c b/arch/mips/alchemy/pb1000/init.c new file mode 100644 index 0000000..8a9c7d5 --- /dev/null +++ b/arch/mips/alchemy/pb1000/init.c @@ -0,0 +1,57 @@ +/* + * BRIEF MODULE DESCRIPTION + * Pb1000 board setup + * + * Copyright 2001, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <linux/kernel.h> + +#include <asm/bootinfo.h> + +#include <prom.h> + +const char *get_system_type(void) +{ + return "Alchemy Pb1000"; +} + +void __init prom_init(void) +{ + unsigned char *memsize_str; + unsigned long memsize; + + prom_argc = (int)fw_arg0; + prom_argv = (char **)fw_arg1; + prom_envp = (char **)fw_arg2; + + prom_init_cmdline(); + memsize_str = prom_getenv("memsize"); + if (!memsize_str) + memsize = 0x04000000; + else + strict_strtol(memsize_str, 0, &memsize); + add_memory_region(0, memsize, BOOT_MEM_RAM); +} diff --git a/arch/mips/alchemy/pb1000/irqmap.c b/arch/mips/alchemy/pb1000/irqmap.c new file mode 100644 index 0000000..b3d56b0 --- /dev/null +++ b/arch/mips/alchemy/pb1000/irqmap.c @@ -0,0 +1,38 @@ +/* + * BRIEF MODULE DESCRIPTION + * Au1xxx irq map table + * + * Copyright 2003 Embedded Edge, LLC + * dan@embeddededge.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <linux/interrupt.h> + +#include <asm/mach-au1x00/au1000.h> + +struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { + { AU1000_GPIO_15, INTC_INT_LOW_LEVEL, 0 }, +}; + +int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map); diff --git a/arch/mips/alchemy/pb1100/Makefile b/arch/mips/alchemy/pb1100/Makefile new file mode 100644 index 0000000..793e97c --- /dev/null +++ b/arch/mips/alchemy/pb1100/Makefile @@ -0,0 +1,8 @@ +# +# Copyright 2000, 2001, 2008 MontaVista Software Inc. +# Author: MontaVista Software, Inc. <source@mvista.com> +# +# Makefile for the Alchemy Semiconductor Pb1100 board. +# + +lib-y := init.o board_setup.o irqmap.o diff --git a/arch/mips/alchemy/pb1100/board_setup.c b/arch/mips/alchemy/pb1100/board_setup.c new file mode 100644 index 0000000..c0bfd59 --- /dev/null +++ b/arch/mips/alchemy/pb1100/board_setup.c @@ -0,0 +1,109 @@ +/* + * Copyright 2002, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <linux/delay.h> + +#include <asm/mach-au1x00/au1000.h> +#include <asm/mach-pb1x00/pb1100.h> + +void board_reset(void) +{ + /* Hit BCSR.RST_VDDI[SOFT_RESET] */ + au_writel(0x00000000, PB1100_RST_VDDI); +} + +void __init board_setup(void) +{ + volatile void __iomem *base = (volatile void __iomem *)0xac000000UL; + + /* Set AUX clock to 12 MHz * 8 = 96 MHz */ + au_writel(8, SYS_AUXPLL); + au_writel(0, SYS_PININPUTEN); + udelay(100); + +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) + { + u32 pin_func, sys_freqctrl, sys_clksrc; + + /* Configure pins GPIO[14:9] as GPIO */ + pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_UR3; + + /* Zero and disable FREQ2 */ + sys_freqctrl = au_readl(SYS_FREQCTRL0); + sys_freqctrl &= ~0xFFF00000; + au_writel(sys_freqctrl, SYS_FREQCTRL0); + + /* Zero and disable USBH/USBD/IrDA clock */ + sys_clksrc = au_readl(SYS_CLKSRC); + sys_clksrc &= ~(SYS_CS_CIR | SYS_CS_DIR | SYS_CS_MIR_MASK); + au_writel(sys_clksrc, SYS_CLKSRC); + + sys_freqctrl = au_readl(SYS_FREQCTRL0); + sys_freqctrl &= ~0xFFF00000; + + sys_clksrc = au_readl(SYS_CLKSRC); + sys_clksrc &= ~(SYS_CS_CIR | SYS_CS_DIR | SYS_CS_MIR_MASK); + + /* FREQ2 = aux / 2 = 48 MHz */ + sys_freqctrl |= (0 << SYS_FC_FRDIV2_BIT) | + SYS_FC_FE2 | SYS_FC_FS2; + au_writel(sys_freqctrl, SYS_FREQCTRL0); + + /* + * Route 48 MHz FREQ2 into USBH/USBD/IrDA + */ + sys_clksrc |= SYS_CS_MUX_FQ2 << SYS_CS_MIR_BIT; + au_writel(sys_clksrc, SYS_CLKSRC); + + /* Setup the static bus controller */ + au_writel(0x00000002, MEM_STCFG3); /* type = PCMCIA */ + au_writel(0x280E3D07, MEM_STTIME3); /* 250ns cycle time */ + au_writel(0x10000000, MEM_STADDR3); /* any PCMCIA select */ + + /* + * Get USB Functionality pin state (device vs host drive pins). + */ + pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_USB; + /* 2nd USB port is USB host. */ + pin_func |= SYS_PF_USB; + au_writel(pin_func, SYS_PINFUNC); + } +#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */ + + /* Enable sys bus clock divider when IDLE state or no bus activity. */ + au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL); + + /* Enable the RTC if not already enabled. */ + if (!(readb(base + 0x28) & 0x20)) { + writeb(readb(base + 0x28) | 0x20, base + 0x28); + au_sync(); + } + /* Put the clock in BCD mode. */ + if (readb(base + 0x2C) & 0x4) { /* reg B */ + writeb(readb(base + 0x2c) & ~0x4, base + 0x2c); + au_sync(); + } +} diff --git a/arch/mips/alchemy/pb1100/init.c b/arch/mips/alchemy/pb1100/init.c new file mode 100644 index 0000000..7c67923 --- /dev/null +++ b/arch/mips/alchemy/pb1100/init.c @@ -0,0 +1,60 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * Pb1100 board setup + * + * Copyright 2002, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <linux/kernel.h> + +#include <asm/bootinfo.h> + +#include <prom.h> + +const char *get_system_type(void) +{ + return "Alchemy Pb1100"; +} + +void __init prom_init(void) +{ + unsigned char *memsize_str; + unsigned long memsize; + + prom_argc = fw_arg0; + prom_argv = (char **)fw_arg1; + prom_envp = (char **)fw_arg3; + + prom_init_cmdline(); + + memsize_str = prom_getenv("memsize"); + if (!memsize_str) + memsize = 0x04000000; + else + strict_strtol(memsize_str, 0, &memsize); + + add_memory_region(0, memsize, BOOT_MEM_RAM); +} diff --git a/arch/mips/alchemy/pb1100/irqmap.c b/arch/mips/alchemy/pb1100/irqmap.c new file mode 100644 index 0000000..9b7dd8b --- /dev/null +++ b/arch/mips/alchemy/pb1100/irqmap.c @@ -0,0 +1,40 @@ +/* + * BRIEF MODULE DESCRIPTION + * Au1xx0 IRQ map table + * + * Copyright 2003 Embedded Edge, LLC + * dan@embeddededge.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> + +#include <asm/mach-au1x00/au1000.h> + +struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { + { AU1000_GPIO_9, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card Fully_Inserted# */ + { AU1000_GPIO_10, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card STSCHG# */ + { AU1000_GPIO_11, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card IRQ# */ + { AU1000_GPIO_13, INTC_INT_LOW_LEVEL, 0 }, /* DC_IRQ# */ +}; + +int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map); diff --git a/arch/mips/alchemy/pb1200/Makefile b/arch/mips/alchemy/pb1200/Makefile new file mode 100644 index 0000000..d678adf --- /dev/null +++ b/arch/mips/alchemy/pb1200/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for the Alchemy Semiconductor Pb1200/DBAu1200 boards. +# + +lib-y := init.o board_setup.o irqmap.o +obj-y += platform.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/mips/alchemy/pb1200/board_setup.c b/arch/mips/alchemy/pb1200/board_setup.c new file mode 100644 index 0000000..6cb21150 --- /dev/null +++ b/arch/mips/alchemy/pb1200/board_setup.c @@ -0,0 +1,162 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * Alchemy Pb1200/Db1200 board setup. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <linux/sched.h> + +#include <prom.h> +#include <au1xxx.h> + +extern void _board_init_irq(void); +extern void (*board_init_irq)(void); + +void board_reset(void) +{ + bcsr->resets = 0; + bcsr->system = 0; +} + +void __init board_setup(void) +{ + char *argptr = NULL; + +#if 0 + { + u32 pin_func; + + /* + * Enable PSC1 SYNC for AC97. Normaly done in audio driver, + * but it is board specific code, so put it here. + */ + pin_func = au_readl(SYS_PINFUNC); + au_sync(); + pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1; + au_writel(pin_func, SYS_PINFUNC); + + au_writel(0, (u32)bcsr | 0x10); /* turn off PCMCIA power */ + au_sync(); + } +#endif + +#if defined(CONFIG_I2C_AU1550) + { + u32 freq0, clksrc; + u32 pin_func; + + /* Select SMBus in CPLD */ + bcsr->resets &= ~BCSR_RESETS_PCS0MUX; + + pin_func = au_readl(SYS_PINFUNC); + au_sync(); + pin_func &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B); + /* Set GPIOs correctly */ + pin_func |= 2 << 17; + au_writel(pin_func, SYS_PINFUNC); + au_sync(); + + /* The I2C driver depends on 50 MHz clock */ + freq0 = au_readl(SYS_FREQCTRL0); + au_sync(); + freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1); + freq0 |= 3 << SYS_FC_FRDIV1_BIT; + /* 396 MHz / (3 + 1) * 2 == 49.5 MHz */ + au_writel(freq0, SYS_FREQCTRL0); + au_sync(); + freq0 |= SYS_FC_FE1; + au_writel(freq0, SYS_FREQCTRL0); + au_sync(); + + clksrc = au_readl(SYS_CLKSRC); + au_sync(); + clksrc &= ~(SYS_CS_CE0 | SYS_CS_DE0 | SYS_CS_ME0_MASK); + /* Bit 22 is EXTCLK0 for PSC0 */ + clksrc |= SYS_CS_MUX_FQ1 << SYS_CS_ME0_BIT; + au_writel(clksrc, SYS_CLKSRC); + au_sync(); + } +#endif + +#ifdef CONFIG_FB_AU1200 + argptr = prom_getcmdline(); +#ifdef CONFIG_MIPS_PB1200 + strcat(argptr, " video=au1200fb:panel:bs"); +#endif +#ifdef CONFIG_MIPS_DB1200 + strcat(argptr, " video=au1200fb:panel:bs"); +#endif +#endif + + /* + * The Pb1200 development board uses external MUX for PSC0 to + * support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI + */ +#ifdef CONFIG_I2C_AU1550 + bcsr->resets &= ~BCSR_RESETS_PCS0MUX; +#endif + au_sync(); + +#ifdef CONFIG_MIPS_PB1200 + printk(KERN_INFO "AMD Alchemy Pb1200 Board\n"); +#endif +#ifdef CONFIG_MIPS_DB1200 + printk(KERN_INFO "AMD Alchemy Db1200 Board\n"); +#endif + + /* Setup Pb1200 External Interrupt Controller */ + board_init_irq = _board_init_irq; +} + +int board_au1200fb_panel(void) +{ + BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR; + int p; + + p = bcsr->switches; + p >>= 8; + p &= 0x0F; + return p; +} + +int board_au1200fb_panel_init(void) +{ + /* Apply power */ + BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR; + + bcsr->board |= BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL; + /* printk(KERN_DEBUG "board_au1200fb_panel_init()\n"); */ + return 0; +} + +int board_au1200fb_panel_shutdown(void) +{ + /* Remove power */ + BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR; + + bcsr->board &= ~(BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | + BCSR_BOARD_LCDBL); + /* printk(KERN_DEBUG "board_au1200fb_panel_shutdown()\n"); */ + return 0; +} diff --git a/arch/mips/alchemy/pb1200/init.c b/arch/mips/alchemy/pb1200/init.c new file mode 100644 index 0000000..e9b2a0f --- /dev/null +++ b/arch/mips/alchemy/pb1200/init.c @@ -0,0 +1,58 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * PB1200 board setup + * + * Copyright 2001, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <linux/kernel.h> + +#include <asm/bootinfo.h> + +#include <prom.h> + +const char *get_system_type(void) +{ + return "Alchemy Pb1200"; +} + +void __init prom_init(void) +{ + unsigned char *memsize_str; + unsigned long memsize; + + prom_argc = (int)fw_arg0; + prom_argv = (char **)fw_arg1; + prom_envp = (char **)fw_arg2; + + prom_init_cmdline(); + memsize_str = prom_getenv("memsize"); + if (!memsize_str) + memsize = 0x08000000; + else + strict_strtol(memsize_str, 0, &memsize); + add_memory_region(0, memsize, BOOT_MEM_RAM); +} diff --git a/arch/mips/alchemy/pb1200/irqmap.c b/arch/mips/alchemy/pb1200/irqmap.c new file mode 100644 index 0000000..2a505ad --- /dev/null +++ b/arch/mips/alchemy/pb1200/irqmap.c @@ -0,0 +1,160 @@ +/* + * BRIEF MODULE DESCRIPTION + * Au1xxx irq map table + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <linux/interrupt.h> + +#include <asm/mach-au1x00/au1000.h> + +#ifdef CONFIG_MIPS_PB1200 +#include <asm/mach-pb1x00/pb1200.h> +#endif + +#ifdef CONFIG_MIPS_DB1200 +#include <asm/mach-db1x00/db1200.h> +#define PB1200_INT_BEGIN DB1200_INT_BEGIN +#define PB1200_INT_END DB1200_INT_END +#endif + +struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { + /* This is external interrupt cascade */ + { AU1000_GPIO_7, INTC_INT_LOW_LEVEL, 0 }, +}; + +int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map); + +/* + * Support for External interrupts on the Pb1200 Development platform. + */ +static volatile int pb1200_cascade_en; + +irqreturn_t pb1200_cascade_handler(int irq, void *dev_id) +{ + unsigned short bisr = bcsr->int_status; + int extirq_nr = 0; + + /* Clear all the edge interrupts. This has no effect on level. */ + bcsr->int_status = bisr; + for ( ; bisr; bisr &= bisr - 1) { + extirq_nr = PB1200_INT_BEGIN + __ffs(bisr); + /* Ack and dispatch IRQ */ + do_IRQ(extirq_nr); + } + + return IRQ_RETVAL(1); +} + +inline void pb1200_enable_irq(unsigned int irq_nr) +{ + bcsr->intset_mask = 1 << (irq_nr - PB1200_INT_BEGIN); + bcsr->intset = 1 << (irq_nr - PB1200_INT_BEGIN); +} + +inline void pb1200_disable_irq(unsigned int irq_nr) +{ + bcsr->intclr_mask = 1 << (irq_nr - PB1200_INT_BEGIN); + bcsr->intclr = 1 << (irq_nr - PB1200_INT_BEGIN); +} + +static unsigned int pb1200_setup_cascade(void) +{ + return request_irq(AU1000_GPIO_7, &pb1200_cascade_handler, + 0, "Pb1200 Cascade", &pb1200_cascade_handler); +} + +static unsigned int pb1200_startup_irq(unsigned int irq) +{ + if (++pb1200_cascade_en == 1) { + int res; + + res = pb1200_setup_cascade(); + if (res) + return res; + } + + pb1200_enable_irq(irq); + + return 0; +} + +static void pb1200_shutdown_irq(unsigned int irq) +{ + pb1200_disable_irq(irq); + if (--pb1200_cascade_en == 0) + free_irq(AU1000_GPIO_7, &pb1200_cascade_handler); +} + +static struct irq_chip external_irq_type = { +#ifdef CONFIG_MIPS_PB1200 + .name = "Pb1200 Ext", +#endif +#ifdef CONFIG_MIPS_DB1200 + .name = "Db1200 Ext", +#endif + .startup = pb1200_startup_irq, + .shutdown = pb1200_shutdown_irq, + .ack = pb1200_disable_irq, + .mask = pb1200_disable_irq, + .mask_ack = pb1200_disable_irq, + .unmask = pb1200_enable_irq, +}; + +void _board_init_irq(void) +{ + unsigned int irq; + +#ifdef CONFIG_MIPS_PB1200 + /* We have a problem with CPLD rev 3. */ + if (((bcsr->whoami & BCSR_WHOAMI_CPLD) >> 4) <= 3) { + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "Pb1200 must be at CPLD rev 4. Please have Pb1200\n"); + printk(KERN_ERR "updated to latest revision. This software will\n"); + printk(KERN_ERR "not work on anything less than CPLD rev 4.\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + panic("Game over. Your score is 0."); + } +#endif + + for (irq = PB1200_INT_BEGIN; irq <= PB1200_INT_END; irq++) { + set_irq_chip_and_handler(irq, &external_irq_type, + handle_level_irq); + pb1200_disable_irq(irq); + } + + /* + * GPIO_7 can not be hooked here, so it is hooked upon first + * request of any source attached to the cascade. + */ +} diff --git a/arch/mips/alchemy/pb1200/platform.c b/arch/mips/alchemy/pb1200/platform.c new file mode 100644 index 0000000..9530329 --- /dev/null +++ b/arch/mips/alchemy/pb1200/platform.c @@ -0,0 +1,166 @@ +/* + * Pb1200/DBAu1200 board platform device registration + * + * Copyright (C) 2008 MontaVista Software Inc. <source@mvista.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/dma-mapping.h> +#include <linux/init.h> +#include <linux/leds.h> +#include <linux/platform_device.h> + +#include <asm/mach-au1x00/au1xxx.h> +#include <asm/mach-au1x00/au1100_mmc.h> + +static int mmc_activity; + +static void pb1200mmc0_set_power(void *mmc_host, int state) +{ + if (state) + bcsr->board |= BCSR_BOARD_SD0PWR; + else + bcsr->board &= ~BCSR_BOARD_SD0PWR; + + au_sync_delay(1); +} + +static int pb1200mmc0_card_readonly(void *mmc_host) +{ + return (bcsr->status & BCSR_STATUS_SD0WP) ? 1 : 0; +} + +static int pb1200mmc0_card_inserted(void *mmc_host) +{ + return (bcsr->sig_status & BCSR_INT_SD0INSERT) ? 1 : 0; +} + +static void pb1200_mmcled_set(struct led_classdev *led, + enum led_brightness brightness) +{ + if (brightness != LED_OFF) { + if (++mmc_activity == 1) + bcsr->disk_leds &= ~(1 << 8); + } else { + if (--mmc_activity == 0) + bcsr->disk_leds |= (1 << 8); + } +} + +static struct led_classdev pb1200mmc_led = { + .brightness_set = pb1200_mmcled_set, +}; + +#ifndef CONFIG_MIPS_DB1200 +static void pb1200mmc1_set_power(void *mmc_host, int state) +{ + if (state) + bcsr->board |= BCSR_BOARD_SD1PWR; + else + bcsr->board &= ~BCSR_BOARD_SD1PWR; + + au_sync_delay(1); +} + +static int pb1200mmc1_card_readonly(void *mmc_host) +{ + return (bcsr->status & BCSR_STATUS_SD1WP) ? 1 : 0; +} + +static int pb1200mmc1_card_inserted(void *mmc_host) +{ + return (bcsr->sig_status & BCSR_INT_SD1INSERT) ? 1 : 0; +} +#endif + +const struct au1xmmc_platform_data au1xmmc_platdata[2] = { + [0] = { + .set_power = pb1200mmc0_set_power, + .card_inserted = pb1200mmc0_card_inserted, + .card_readonly = pb1200mmc0_card_readonly, + .cd_setup = NULL, /* use poll-timer in driver */ + .led = &pb1200mmc_led, + }, +#ifndef CONFIG_MIPS_DB1200 + [1] = { + .set_power = pb1200mmc1_set_power, + .card_inserted = pb1200mmc1_card_inserted, + .card_readonly = pb1200mmc1_card_readonly, + .cd_setup = NULL, /* use poll-timer in driver */ + .led = &pb1200mmc_led, + }, +#endif +}; + +static struct resource ide_resources[] = { + [0] = { + .start = IDE_PHYS_ADDR, + .end = IDE_PHYS_ADDR + IDE_PHYS_LEN - 1, + .flags = IORESOURCE_MEM + }, + [1] = { + .start = IDE_INT, + .end = IDE_INT, + .flags = IORESOURCE_IRQ + } +}; + +static u64 ide_dmamask = DMA_32BIT_MASK; + +static struct platform_device ide_device = { + .name = "au1200-ide", + .id = 0, + .dev = { + .dma_mask = &ide_dmamask, + .coherent_dma_mask = DMA_32BIT_MASK, + }, + .num_resources = ARRAY_SIZE(ide_resources), + .resource = ide_resources +}; + +static struct resource smc91c111_resources[] = { + [0] = { + .name = "smc91x-regs", + .start = SMC91C111_PHYS_ADDR, + .end = SMC91C111_PHYS_ADDR + 0xf, + .flags = IORESOURCE_MEM + }, + [1] = { + .start = SMC91C111_INT, + .end = SMC91C111_INT, + .flags = IORESOURCE_IRQ + }, +}; + +static struct platform_device smc91c111_device = { + .name = "smc91x", + .id = -1, + .num_resources = ARRAY_SIZE(smc91c111_resources), + .resource = smc91c111_resources +}; + +static struct platform_device *board_platform_devices[] __initdata = { + &ide_device, + &smc91c111_device +}; + +static int __init board_register_devices(void) +{ + return platform_add_devices(board_platform_devices, + ARRAY_SIZE(board_platform_devices)); +} + +arch_initcall(board_register_devices); diff --git a/arch/mips/alchemy/pb1500/Makefile b/arch/mips/alchemy/pb1500/Makefile new file mode 100644 index 0000000..602f38d --- /dev/null +++ b/arch/mips/alchemy/pb1500/Makefile @@ -0,0 +1,8 @@ +# +# Copyright 2000, 2001, 2008 MontaVista Software Inc. +# Author: MontaVista Software, Inc. <source@mvista.com> +# +# Makefile for the Alchemy Semiconductor Pb1500 board. +# + +lib-y := init.o board_setup.o irqmap.o diff --git a/arch/mips/alchemy/pb1500/board_setup.c b/arch/mips/alchemy/pb1500/board_setup.c new file mode 100644 index 0000000..035771c --- /dev/null +++ b/arch/mips/alchemy/pb1500/board_setup.c @@ -0,0 +1,119 @@ +/* + * Copyright 2000, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <linux/delay.h> + +#include <asm/mach-au1x00/au1000.h> +#include <asm/mach-pb1x00/pb1500.h> + +void board_reset(void) +{ + /* Hit BCSR.RST_VDDI[SOFT_RESET] */ + au_writel(0x00000000, PB1500_RST_VDDI); +} + +void __init board_setup(void) +{ + u32 pin_func; + u32 sys_freqctrl, sys_clksrc; + + sys_clksrc = sys_freqctrl = pin_func = 0; + /* Set AUX clock to 12 MHz * 8 = 96 MHz */ + au_writel(8, SYS_AUXPLL); + au_writel(0, SYS_PINSTATERD); + udelay(100); + +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) + + /* GPIO201 is input for PCMCIA card detect */ + /* GPIO203 is input for PCMCIA interrupt request */ + au_writel(au_readl(GPIO2_DIR) & ~((1 << 1) | (1 << 3)), GPIO2_DIR); + + /* Zero and disable FREQ2 */ + sys_freqctrl = au_readl(SYS_FREQCTRL0); + sys_freqctrl &= ~0xFFF00000; + au_writel(sys_freqctrl, SYS_FREQCTRL0); + + /* zero and disable USBH/USBD clocks */ + sys_clksrc = au_readl(SYS_CLKSRC); + sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK | + SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK); + au_writel(sys_clksrc, SYS_CLKSRC); + + sys_freqctrl = au_readl(SYS_FREQCTRL0); + sys_freqctrl &= ~0xFFF00000; + + sys_clksrc = au_readl(SYS_CLKSRC); + sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK | + SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK); + + /* FREQ2 = aux/2 = 48 MHz */ + sys_freqctrl |= (0 << SYS_FC_FRDIV2_BIT) | SYS_FC_FE2 | SYS_FC_FS2; + au_writel(sys_freqctrl, SYS_FREQCTRL0); + + /* + * Route 48MHz FREQ2 into USB Host and/or Device + */ + sys_clksrc |= SYS_CS_MUX_FQ2 << SYS_CS_MUH_BIT; + au_writel(sys_clksrc, SYS_CLKSRC); + + pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_USB; + /* 2nd USB port is USB host */ + pin_func |= SYS_PF_USB; + au_writel(pin_func, SYS_PINFUNC); +#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */ + +#ifdef CONFIG_PCI + /* Setup PCI bus controller */ + au_writel(0, Au1500_PCI_CMEM); + au_writel(0x00003fff, Au1500_CFG_BASE); +#if defined(__MIPSEB__) + au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG); +#else + au_writel(0xf, Au1500_PCI_CFG); +#endif + au_writel(0xf0000000, Au1500_PCI_MWMASK_DEV); + au_writel(0, Au1500_PCI_MWBASE_REV_CCL); + au_writel(0x02a00356, Au1500_PCI_STATCMD); + au_writel(0x00003c04, Au1500_PCI_HDRTYPE); + au_writel(0x00000008, Au1500_PCI_MBAR); + au_sync(); +#endif + + /* Enable sys bus clock divider when IDLE state or no bus activity. */ + au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL); + + /* Enable the RTC if not already enabled */ + if (!(au_readl(0xac000028) & 0x20)) { + printk(KERN_INFO "enabling clock ...\n"); + au_writel((au_readl(0xac000028) | 0x20), 0xac000028); + } + /* Put the clock in BCD mode */ + if (au_readl(0xac00002c) & 0x4) { /* reg B */ + au_writel(au_readl(0xac00002c) & ~0x4, 0xac00002c); + au_sync(); + } +} diff --git a/arch/mips/alchemy/pb1500/init.c b/arch/mips/alchemy/pb1500/init.c new file mode 100644 index 0000000..3b6e395 --- /dev/null +++ b/arch/mips/alchemy/pb1500/init.c @@ -0,0 +1,58 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * Pb1500 board setup + * + * Copyright 2001, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <linux/kernel.h> + +#include <asm/bootinfo.h> + +#include <prom.h> + +const char *get_system_type(void) +{ + return "Alchemy Pb1500"; +} + +void __init prom_init(void) +{ + unsigned char *memsize_str; + unsigned long memsize; + + prom_argc = (int)fw_arg0; + prom_argv = (char **)fw_arg1; + prom_envp = (char **)fw_arg2; + + prom_init_cmdline(); + memsize_str = prom_getenv("memsize"); + if (!memsize_str) + memsize = 0x04000000; + else + strict_strtol(memsize_str, 0, &memsize); + add_memory_region(0, memsize, BOOT_MEM_RAM); +} diff --git a/arch/mips/alchemy/pb1500/irqmap.c b/arch/mips/alchemy/pb1500/irqmap.c new file mode 100644 index 0000000..39c4682 --- /dev/null +++ b/arch/mips/alchemy/pb1500/irqmap.c @@ -0,0 +1,46 @@ +/* + * BRIEF MODULE DESCRIPTION + * Au1xxx irq map table + * + * Copyright 2003 Embedded Edge, LLC + * dan@embeddededge.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> + +#include <asm/mach-au1x00/au1000.h> + +char irq_tab_alchemy[][5] __initdata = { + [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT370 */ + [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */ +}; + +struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { + { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 }, + { AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 }, + { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 }, + { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 }, + { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 }, +}; + +int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map); diff --git a/arch/mips/alchemy/pb1550/Makefile b/arch/mips/alchemy/pb1550/Makefile new file mode 100644 index 0000000..7d8beca --- /dev/null +++ b/arch/mips/alchemy/pb1550/Makefile @@ -0,0 +1,8 @@ +# +# Copyright 2000, 2008 MontaVista Software Inc. +# Author: MontaVista Software, Inc. <source@mvista.com> +# +# Makefile for the Alchemy Semiconductor Pb1550 board. +# + +lib-y := init.o board_setup.o irqmap.o diff --git a/arch/mips/alchemy/pb1550/board_setup.c b/arch/mips/alchemy/pb1550/board_setup.c new file mode 100644 index 0000000..0ed76b6 --- /dev/null +++ b/arch/mips/alchemy/pb1550/board_setup.c @@ -0,0 +1,58 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * Alchemy Pb1550 board setup. + * + * Copyright 2000, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> + +#include <asm/mach-au1x00/au1000.h> +#include <asm/mach-pb1x00/pb1550.h> + +void board_reset(void) +{ + /* Hit BCSR.SYSTEM[RESET] */ + au_writew(au_readw(0xAF00001C) & ~BCSR_SYSTEM_RESET, 0xAF00001C); +} + +void __init board_setup(void) +{ + u32 pin_func; + + /* + * Enable PSC1 SYNC for AC'97. Normaly done in audio driver, + * but it is board specific code, so put it here. + */ + pin_func = au_readl(SYS_PINFUNC); + au_sync(); + pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1; + au_writel(pin_func, SYS_PINFUNC); + + au_writel(0, (u32)bcsr | 0x10); /* turn off PCMCIA power */ + au_sync(); + + printk(KERN_INFO "AMD Alchemy Pb1550 Board\n"); +} diff --git a/arch/mips/alchemy/pb1550/init.c b/arch/mips/alchemy/pb1550/init.c new file mode 100644 index 0000000..e1055a1 --- /dev/null +++ b/arch/mips/alchemy/pb1550/init.c @@ -0,0 +1,58 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * Pb1550 board setup + * + * Copyright 2001, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <linux/kernel.h> + +#include <asm/bootinfo.h> + +#include <prom.h> + +const char *get_system_type(void) +{ + return "Alchemy Pb1550"; +} + +void __init prom_init(void) +{ + unsigned char *memsize_str; + unsigned long memsize; + + prom_argc = (int)fw_arg0; + prom_argv = (char **)fw_arg1; + prom_envp = (char **)fw_arg2; + + prom_init_cmdline(); + memsize_str = prom_getenv("memsize"); + if (!memsize_str) + memsize = 0x08000000; + else + strict_strtol(memsize_str, 0, &memsize); + add_memory_region(0, memsize, BOOT_MEM_RAM); +} diff --git a/arch/mips/alchemy/pb1550/irqmap.c b/arch/mips/alchemy/pb1550/irqmap.c new file mode 100644 index 0000000..a02a4d1 --- /dev/null +++ b/arch/mips/alchemy/pb1550/irqmap.c @@ -0,0 +1,43 @@ +/* + * BRIEF MODULE DESCRIPTION + * Au1xx0 IRQ map table + * + * Copyright 2003 Embedded Edge, LLC + * dan@embeddededge.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> + +#include <asm/mach-au1x00/au1000.h> + +char irq_tab_alchemy[][5] __initdata = { + [12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */ + [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */ +}; + +struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { + { AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 }, + { AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 }, +}; + +int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map); diff --git a/arch/mips/alchemy/xxs1500/Makefile b/arch/mips/alchemy/xxs1500/Makefile new file mode 100644 index 0000000..db3c526 --- /dev/null +++ b/arch/mips/alchemy/xxs1500/Makefile @@ -0,0 +1,8 @@ +# +# Copyright 2003 MontaVista Software Inc. +# Author: MontaVista Software, Inc. <source@mvista.com> +# +# Makefile for MyCable XXS1500 board. +# + +lib-y := init.o board_setup.o irqmap.o diff --git a/arch/mips/alchemy/xxs1500/board_setup.c b/arch/mips/alchemy/xxs1500/board_setup.c new file mode 100644 index 0000000..4c587ac --- /dev/null +++ b/arch/mips/alchemy/xxs1500/board_setup.c @@ -0,0 +1,79 @@ +/* + * Copyright 2000-2003, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <linux/delay.h> + +#include <asm/mach-au1x00/au1000.h> + +void board_reset(void) +{ + /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */ + au_writel(0x00000000, 0xAE00001C); +} + +void __init board_setup(void) +{ + u32 pin_func; + + /* Set multiple use pins (UART3/GPIO) to UART (it's used as UART too) */ + pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_UR3; + pin_func |= SYS_PF_UR3; + au_writel(pin_func, SYS_PINFUNC); + + /* Enable UART */ + au_writel(0x01, UART3_ADDR + UART_MOD_CNTRL); /* clock enable (CE) */ + mdelay(10); + au_writel(0x03, UART3_ADDR + UART_MOD_CNTRL); /* CE and "enable" */ + mdelay(10); + + /* Enable DTR = USB power up */ + au_writel(0x01, UART3_ADDR + UART_MCR); /* UART_MCR_DTR is 0x01??? */ + +#ifdef CONFIG_PCMCIA_XXS1500 + /* Setup PCMCIA signals */ + au_writel(0, SYS_PININPUTEN); + + /* GPIO 0, 1, and 4 are inputs */ + au_writel(1 | (1 << 1) | (1 << 4), SYS_TRIOUTCLR); + + /* Enable GPIO2 if not already enabled */ + au_writel(1, GPIO2_ENABLE); + /* GPIO2 208/9/10/11 are inputs */ + au_writel((1 << 8) | (1 << 9) | (1 << 10) | (1 << 11), GPIO2_DIR); + + /* Turn off power */ + au_writel((au_readl(GPIO2_PINSTATE) & ~(1 << 14)) | (1 << 30), + GPIO2_OUTPUT); +#endif + +#ifdef CONFIG_PCI +#if defined(__MIPSEB__) + au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG); +#else + au_writel(0xf, Au1500_PCI_CFG); +#endif +#endif +} diff --git a/arch/mips/alchemy/xxs1500/init.c b/arch/mips/alchemy/xxs1500/init.c new file mode 100644 index 0000000..7516434 --- /dev/null +++ b/arch/mips/alchemy/xxs1500/init.c @@ -0,0 +1,58 @@ +/* + * BRIEF MODULE DESCRIPTION + * XXS1500 board setup + * + * Copyright 2003, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <linux/kernel.h> + +#include <asm/bootinfo.h> + +#include <prom.h> + +const char *get_system_type(void) +{ + return "XXS1500"; +} + +void __init prom_init(void) +{ + unsigned char *memsize_str; + unsigned long memsize; + + prom_argc = fw_arg0; + prom_argv = (char **)fw_arg1; + prom_envp = (char **)fw_arg2; + + prom_init_cmdline(); + + memsize_str = prom_getenv("memsize"); + if (!memsize_str) + memsize = 0x04000000; + else + strict_strtol(memsize_str, 0, &memsize); + add_memory_region(0, memsize, BOOT_MEM_RAM); +} diff --git a/arch/mips/alchemy/xxs1500/irqmap.c b/arch/mips/alchemy/xxs1500/irqmap.c new file mode 100644 index 0000000..edf06ed --- /dev/null +++ b/arch/mips/alchemy/xxs1500/irqmap.c @@ -0,0 +1,49 @@ +/* + * BRIEF MODULE DESCRIPTION + * Au1xxx irq map table + * + * Copyright 2003 Embedded Edge, LLC + * dan@embeddededge.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> + +#include <asm/mach-au1x00/au1000.h> + +struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { + { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 }, + { AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 }, + { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 }, + { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 }, + { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 }, + { AU1500_GPIO_207, INTC_INT_LOW_LEVEL, 0 }, + + { AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 }, + { AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 }, + { AU1000_GPIO_2, INTC_INT_LOW_LEVEL, 0 }, + { AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 }, + { AU1000_GPIO_4, INTC_INT_LOW_LEVEL, 0 }, /* CF interrupt */ + { AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 }, +}; + +int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map); |