summaryrefslogtreecommitdiff
path: root/arch/mips/ddb5xxx
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/ddb5xxx')
-rw-r--r--arch/mips/ddb5xxx/Kconfig4
-rw-r--r--arch/mips/ddb5xxx/common/Makefile7
-rw-r--r--arch/mips/ddb5xxx/common/nile4.c130
-rw-r--r--arch/mips/ddb5xxx/common/prom.c132
-rw-r--r--arch/mips/ddb5xxx/common/rtc_ds1386.c170
-rw-r--r--arch/mips/ddb5xxx/ddb5477/Makefile11
-rw-r--r--arch/mips/ddb5xxx/ddb5477/ddb5477-platform.c49
-rw-r--r--arch/mips/ddb5xxx/ddb5477/debug.c160
-rw-r--r--arch/mips/ddb5xxx/ddb5477/irq.c209
-rw-r--r--arch/mips/ddb5xxx/ddb5477/irq_5477.c154
-rw-r--r--arch/mips/ddb5xxx/ddb5477/kgdb_io.c136
-rw-r--r--arch/mips/ddb5xxx/ddb5477/lcd44780.c96
-rw-r--r--arch/mips/ddb5xxx/ddb5477/lcd44780.h15
-rw-r--r--arch/mips/ddb5xxx/ddb5477/setup.c399
14 files changed, 0 insertions, 1672 deletions
diff --git a/arch/mips/ddb5xxx/Kconfig b/arch/mips/ddb5xxx/Kconfig
deleted file mode 100644
index e9b5de4..0000000
--- a/arch/mips/ddb5xxx/Kconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-config DDB5477_BUS_FREQUENCY
- int "bus frequency (in kHZ, 0 for auto-detect)"
- depends on DDB5477
- default 0
diff --git a/arch/mips/ddb5xxx/common/Makefile b/arch/mips/ddb5xxx/common/Makefile
deleted file mode 100644
index 2a6a4e9..0000000
--- a/arch/mips/ddb5xxx/common/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# Makefile for the common code of NEC DDB-Vrc5xxx board
-#
-
-obj-y += nile4.o prom.o rtc_ds1386.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/ddb5xxx/common/nile4.c b/arch/mips/ddb5xxx/common/nile4.c
deleted file mode 100644
index 7ec7d90..0000000
--- a/arch/mips/ddb5xxx/common/nile4.c
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * arch/mips/ddb5xxx/common/nile4.c
- * misc low-level routines for vrc-5xxx controllers.
- *
- * derived from original code by Geert Uytterhoeven <geert@sonycom.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-
-#include <asm/ddb5xxx/ddb5xxx.h>
-
-u32
-ddb_calc_pdar(u32 phys, u32 size, int width,
- int on_memory_bus, int pci_visible)
-{
- u32 maskbits;
- u32 widthbits;
-
- switch (size) {
-#if 0 /* We don't support 4 GB yet */
- case 0x100000000: /* 4 GB */
- maskbits = 4;
- break;
-#endif
- case 0x80000000: /* 2 GB */
- maskbits = 5;
- break;
- case 0x40000000: /* 1 GB */
- maskbits = 6;
- break;
- case 0x20000000: /* 512 MB */
- maskbits = 7;
- break;
- case 0x10000000: /* 256 MB */
- maskbits = 8;
- break;
- case 0x08000000: /* 128 MB */
- maskbits = 9;
- break;
- case 0x04000000: /* 64 MB */
- maskbits = 10;
- break;
- case 0x02000000: /* 32 MB */
- maskbits = 11;
- break;
- case 0x01000000: /* 16 MB */
- maskbits = 12;
- break;
- case 0x00800000: /* 8 MB */
- maskbits = 13;
- break;
- case 0x00400000: /* 4 MB */
- maskbits = 14;
- break;
- case 0x00200000: /* 2 MB */
- maskbits = 15;
- break;
- case 0: /* OFF */
- maskbits = 0;
- break;
- default:
- panic("nile4_set_pdar: unsupported size %p", (void *) size);
- }
- switch (width) {
- case 8:
- widthbits = 0;
- break;
- case 16:
- widthbits = 1;
- break;
- case 32:
- widthbits = 2;
- break;
- case 64:
- widthbits = 3;
- break;
- default:
- panic("nile4_set_pdar: unsupported width %d", width);
- }
-
- return maskbits | (on_memory_bus ? 0x10 : 0) |
- (pci_visible ? 0x20 : 0) | (widthbits << 6) |
- (phys & 0xffe00000);
-}
-
-void
-ddb_set_pdar(u32 pdar, u32 phys, u32 size, int width,
- int on_memory_bus, int pci_visible)
-{
- u32 temp= ddb_calc_pdar(phys, size, width, on_memory_bus, pci_visible);
- ddb_out32(pdar, temp);
- ddb_out32(pdar + 4, 0);
-
- /*
- * When programming a PDAR, the register should be read immediately
- * after writing it. This ensures that address decoders are properly
- * configured.
- * [jsun] is this really necessary?
- */
- ddb_in32(pdar);
- ddb_in32(pdar + 4);
-}
-
-/*
- * routines that mess with PCIINITx registers
- */
-
-void ddb_set_pmr(u32 pmr, u32 type, u32 addr, u32 options)
-{
- switch (type) {
- case DDB_PCICMD_IACK: /* PCI Interrupt Acknowledge */
- case DDB_PCICMD_IO: /* PCI I/O Space */
- case DDB_PCICMD_MEM: /* PCI Memory Space */
- case DDB_PCICMD_CFG: /* PCI Configuration Space */
- break;
- default:
- panic("nile4_set_pmr: invalid type %d", type);
- }
- ddb_out32(pmr, (type << 1) | (addr & 0xffe00000) | options );
- ddb_out32(pmr + 4, 0);
-}
diff --git a/arch/mips/ddb5xxx/common/prom.c b/arch/mips/ddb5xxx/common/prom.c
deleted file mode 100644
index 54a857b..0000000
--- a/arch/mips/ddb5xxx/common/prom.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/bootmem.h>
-
-#include <asm/addrspace.h>
-#include <asm/bootinfo.h>
-#include <asm/ddb5xxx/ddb5xxx.h>
-#include <asm/debug.h>
-
-const char *get_system_type(void)
-{
- switch (mips_machtype) {
- case MACH_NEC_DDB5477: return "NEC DDB Vrc-5477";
- case MACH_NEC_ROCKHOPPER: return "NEC Rockhopper";
- case MACH_NEC_ROCKHOPPERII: return "NEC RockhopperII";
- default: return "Unknown NEC board";
- }
-}
-
-#if defined(CONFIG_DDB5477)
-void ddb5477_runtime_detection(void);
-#endif
-
-/* [jsun@junsun.net] PMON passes arguments in C main() style */
-void __init prom_init(void)
-{
- int argc = fw_arg0;
- char **arg = (char**) fw_arg1;
- int i;
-
- /* if user passes kernel args, ignore the default one */
- if (argc > 1)
- arcs_cmdline[0] = '\0';
-
- /* arg[0] is "g", the rest is boot parameters */
- for (i = 1; i < argc; i++) {
- if (strlen(arcs_cmdline) + strlen(arg[i] + 1)
- >= sizeof(arcs_cmdline))
- break;
- strcat(arcs_cmdline, arg[i]);
- strcat(arcs_cmdline, " ");
- }
-
- mips_machgroup = MACH_GROUP_NEC_DDB;
-
-#if defined(CONFIG_DDB5477)
- ddb5477_runtime_detection();
- add_memory_region(0, board_ram_size, BOOT_MEM_RAM);
-#endif
-}
-
-void __init prom_free_prom_memory(void)
-{
-}
-
-#if defined(CONFIG_DDB5477)
-
-#define DEFAULT_LCS1_BASE 0x19000000
-#define TESTVAL1 'K'
-#define TESTVAL2 'S'
-
-int board_ram_size;
-void ddb5477_runtime_detection(void)
-{
- volatile char *test_offset;
- char saved_test_byte;
-
- /* Determine if this is a DDB5477 board, or a BSB-VR0300
- base board. We can tell by checking for the location of
- the NVRAM. It lives at the beginning of LCS1 on the DDB5477,
- and the beginning of LCS1 on the BSB-VR0300 is flash memory.
- The first 2K of the NVRAM are reserved, so don't we'll poke
- around just after that.
- */
-
- /* We can only use the PCI bus to distinquish between
- the Rockhopper and RockhopperII backplanes and this must
- wait until ddb5477_board_init() in setup.c after the 5477
- is initialized. So, until then handle
- both Rockhopper and RockhopperII backplanes as Rockhopper 1
- */
-
- test_offset = (char *)KSEG1ADDR(DEFAULT_LCS1_BASE + 0x800);
- saved_test_byte = *test_offset;
-
- *test_offset = TESTVAL1;
- if (*test_offset != TESTVAL1) {
- /* We couldn't set our test value, so it must not be NVRAM,
- so it's a BSB_VR0300 */
- mips_machtype = MACH_NEC_ROCKHOPPER;
- } else {
- /* We may have gotten lucky, and the TESTVAL1 was already
- stored at the test location, so we must check a second
- test value */
- *test_offset = TESTVAL2;
- if (*test_offset != TESTVAL2) {
- /* OK, we couldn't set this value either, so it must
- definately be a BSB_VR0300 */
- mips_machtype = MACH_NEC_ROCKHOPPER;
- } else {
- /* We could change the value twice, so it must be
- NVRAM, so it's a DDB_VRC5477 */
- mips_machtype = MACH_NEC_DDB5477;
- }
- }
- /* Restore the original byte */
- *test_offset = saved_test_byte;
-
- /* before we know a better way, we will trust PMON for getting
- * RAM size
- */
- board_ram_size = 1 << (36 - (ddb_in32(DDB_SDRAM0) & 0xf));
-
- db_run(printk("DDB run-time detection : %s, %d MB RAM\n",
- mips_machtype == MACH_NEC_DDB5477 ?
- "DDB5477" : "Rockhopper",
- board_ram_size >> 20));
-
- /* we can't handle ram size > 128 MB */
- db_assert(board_ram_size <= (128 << 20));
-}
-#endif
diff --git a/arch/mips/ddb5xxx/common/rtc_ds1386.c b/arch/mips/ddb5xxx/common/rtc_ds1386.c
deleted file mode 100644
index 5dc34da..0000000
--- a/arch/mips/ddb5xxx/common/rtc_ds1386.c
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * arch/mips/ddb5xxx/common/rtc_ds1386.c
- * low-level RTC hookups for s for Dallas 1396 chip.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-
-/*
- * This file exports a function, rtc_ds1386_init(), which expects an
- * uncached base address as the argument. It will set the two function
- * pointers expected by the MIPS generic timer code.
- */
-
-#include <linux/types.h>
-#include <linux/time.h>
-#include <linux/bcd.h>
-
-#include <asm/time.h>
-#include <asm/addrspace.h>
-
-#include <asm/mc146818rtc.h>
-#include <asm/debug.h>
-
-#define EPOCH 2000
-
-#define READ_RTC(x) *(volatile unsigned char*)(rtc_base+x)
-#define WRITE_RTC(x, y) *(volatile unsigned char*)(rtc_base+x) = y
-
-static unsigned long rtc_base;
-
-static unsigned long
-rtc_ds1386_get_time(void)
-{
- u8 byte;
- u8 temp;
- unsigned int year, month, day, hour, minute, second;
- unsigned long flags;
-
- spin_lock_irqsave(&rtc_lock, flags);
- /* let us freeze external registers */
- byte = READ_RTC(0xB);
- byte &= 0x3f;
- WRITE_RTC(0xB, byte);
-
- /* read time data */
- year = BCD2BIN(READ_RTC(0xA)) + EPOCH;
- month = BCD2BIN(READ_RTC(0x9) & 0x1f);
- day = BCD2BIN(READ_RTC(0x8));
- minute = BCD2BIN(READ_RTC(0x2));
- second = BCD2BIN(READ_RTC(0x1));
-
- /* hour is special - deal with it later */
- temp = READ_RTC(0x4);
-
- /* enable time transfer */
- byte |= 0x80;
- WRITE_RTC(0xB, byte);
- spin_unlock_irqrestore(&rtc_lock, flags);
-
- /* calc hour */
- if (temp & 0x40) {
- /* 12 hour format */
- hour = BCD2BIN(temp & 0x1f);
- if (temp & 0x20) hour += 12; /* PM */
- } else {
- /* 24 hour format */
- hour = BCD2BIN(temp & 0x3f);
- }
-
- return mktime(year, month, day, hour, minute, second);
-}
-
-static int
-rtc_ds1386_set_time(unsigned long t)
-{
- struct rtc_time tm;
- u8 byte;
- u8 temp;
- u8 year, month, day, hour, minute, second;
- unsigned long flags;
-
- spin_lock_irqsave(&rtc_lock, flags);
- /* let us freeze external registers */
- byte = READ_RTC(0xB);
- byte &= 0x3f;
- WRITE_RTC(0xB, byte);
-
- /* convert */
- to_tm(t, &tm);
-
-
- /* check each field one by one */
- year = BIN2BCD(tm.tm_year - EPOCH);
- if (year != READ_RTC(0xA)) {
- WRITE_RTC(0xA, year);
- }
-
- temp = READ_RTC(0x9);
- month = BIN2BCD(tm.tm_mon+1); /* tm_mon starts from 0 to 11 */
- if (month != (temp & 0x1f)) {
- WRITE_RTC( 0x9,
- (month & 0x1f) | (temp & ~0x1f) );
- }
-
- day = BIN2BCD(tm.tm_mday);
- if (day != READ_RTC(0x8)) {
- WRITE_RTC(0x8, day);
- }
-
- temp = READ_RTC(0x4);
- if (temp & 0x40) {
- /* 12 hour format */
- hour = 0x40;
- if (tm.tm_hour > 12) {
- hour |= 0x20 | (BIN2BCD(hour-12) & 0x1f);
- } else {
- hour |= BIN2BCD(tm.tm_hour);
- }
- } else {
- /* 24 hour format */
- hour = BIN2BCD(tm.tm_hour) & 0x3f;
- }
- if (hour != temp) WRITE_RTC(0x4, hour);
-
- minute = BIN2BCD(tm.tm_min);
- if (minute != READ_RTC(0x2)) {
- WRITE_RTC(0x2, minute);
- }
-
- second = BIN2BCD(tm.tm_sec);
- if (second != READ_RTC(0x1)) {
- WRITE_RTC(0x1, second);
- }
- spin_unlock_irqrestore(&rtc_lock, flags);
-
- return 0;
-}
-
-void
-rtc_ds1386_init(unsigned long base)
-{
- unsigned char byte;
-
- /* remember the base */
- rtc_base = base;
- db_assert((rtc_base & 0xe0000000) == KSEG1);
-
- /* turn on RTC if it is not on */
- byte = READ_RTC(0x9);
- if (byte & 0x80) {
- byte &= 0x7f;
- WRITE_RTC(0x9, byte);
- }
-
- /* enable time transfer */
- byte = READ_RTC(0xB);
- byte |= 0x80;
- WRITE_RTC(0xB, byte);
-
- /* set the function pointers */
- rtc_mips_get_time = rtc_ds1386_get_time;
- rtc_mips_set_time = rtc_ds1386_set_time;
-}
diff --git a/arch/mips/ddb5xxx/ddb5477/Makefile b/arch/mips/ddb5xxx/ddb5477/Makefile
deleted file mode 100644
index 5200944..0000000
--- a/arch/mips/ddb5xxx/ddb5477/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Makefile for NEC DDB-Vrc5477 board
-#
-
-obj-y += ddb5477-platform.o irq.o irq_5477.o setup.o \
- lcd44780.o
-
-obj-$(CONFIG_RUNTIME_DEBUG) += debug.o
-obj-$(CONFIG_KGDB) += kgdb_io.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/ddb5xxx/ddb5477/ddb5477-platform.c b/arch/mips/ddb5xxx/ddb5477/ddb5477-platform.c
deleted file mode 100644
index c16020a..0000000
--- a/arch/mips/ddb5xxx/ddb5477/ddb5477-platform.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/serial_8250.h>
-
-#include <asm/ddb5xxx/ddb5477.h>
-
-#define DDB_UART_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP)
-
-#define DDB5477_PORT(base, int) \
-{ \
- .mapbase = base, \
- .irq = int, \
- .uartclk = 1843200, \
- .iotype = UPIO_MEM, \
- .flags = DDB_UART_FLAGS, \
- .regshift = 3, \
-}
-
-static struct plat_serial8250_port uart8250_data[] = {
- DDB5477_PORT(0xbfa04200, VRC5477_IRQ_UART0),
- DDB5477_PORT(0xbfa04240, VRC5477_IRQ_UART1),
- { },
-};
-
-static struct platform_device uart8250_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = uart8250_data,
- },
-};
-
-static int __init uart8250_init(void)
-{
- return platform_device_register(&uart8250_device);
-}
-
-module_init(uart8250_init);
-
-MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("8250 UART probe driver for the NEC DDB5477");
diff --git a/arch/mips/ddb5xxx/ddb5477/debug.c b/arch/mips/ddb5xxx/ddb5477/debug.c
deleted file mode 100644
index 68919d5..0000000
--- a/arch/mips/ddb5xxx/ddb5477/debug.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/***********************************************************************
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * arch/mips/ddb5xxx/ddb5477/debug.c
- * vrc5477 specific debug routines.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- ***********************************************************************
- */
-
-#include <linux/kernel.h>
-
-#include <asm/mipsregs.h>
-#include <asm/ddb5xxx/ddb5xxx.h>
-
-typedef struct {
- const char *regname;
- unsigned regaddr;
-} Register;
-
-void jsun_show_regs(char *name, Register *regs)
-{
- int i;
-
- printk("\nshow regs: %s\n", name);
- for(i=0;regs[i].regname!= NULL; i++) {
- printk("%-16s= %08x\t\t(@%08x)\n",
- regs[i].regname,
- *(unsigned *)(regs[i].regaddr),
- regs[i].regaddr);
- }
-}
-
-static Register int_regs[] = {
- {"DDB_INTCTRL0", DDB_BASE + DDB_INTCTRL0},
- {"DDB_INTCTRL1", DDB_BASE + DDB_INTCTRL1},
- {"DDB_INTCTRL2", DDB_BASE + DDB_INTCTRL2},
- {"DDB_INTCTRL3", DDB_BASE + DDB_INTCTRL3},
- {"DDB_INT0STAT", DDB_BASE + DDB_INT0STAT},
- {"DDB_INT1STAT", DDB_BASE + DDB_INT1STAT},
- {"DDB_INT2STAT", DDB_BASE + DDB_INT2STAT},
- {"DDB_INT3STAT", DDB_BASE + DDB_INT3STAT},
- {"DDB_INT4STAT", DDB_BASE + DDB_INT4STAT},
- {"DDB_NMISTAT", DDB_BASE + DDB_NMISTAT},
- {"DDB_INTPPES0", DDB_BASE + DDB_INTPPES0},
- {"DDB_INTPPES1", DDB_BASE + DDB_INTPPES1},
- {NULL, 0x0}
-};
-
-void vrc5477_show_int_regs()
-{
- jsun_show_regs("interrupt registers", int_regs);
- printk("CPU CAUSE = %08x\n", read_c0_cause());
- printk("CPU STATUS = %08x\n", read_c0_status());
-}
-static Register pdar_regs[] = {
- {"DDB_SDRAM0", DDB_BASE + DDB_SDRAM0},
- {"DDB_SDRAM1", DDB_BASE + DDB_SDRAM1},
- {"DDB_LCS0", DDB_BASE + DDB_LCS0},
- {"DDB_LCS1", DDB_BASE + DDB_LCS1},
- {"DDB_LCS2", DDB_BASE + DDB_LCS2},
- {"DDB_INTCS", DDB_BASE + DDB_INTCS},
- {"DDB_BOOTCS", DDB_BASE + DDB_BOOTCS},
- {"DDB_PCIW0", DDB_BASE + DDB_PCIW0},
- {"DDB_PCIW1", DDB_BASE + DDB_PCIW1},
- {"DDB_IOPCIW0", DDB_BASE + DDB_IOPCIW0},
- {"DDB_IOPCIW1", DDB_BASE + DDB_IOPCIW1},
- {NULL, 0x0}
-};
-void vrc5477_show_pdar_regs(void)
-{
- jsun_show_regs("PDAR regs", pdar_regs);
-}
-
-static Register bar_regs[] = {
- {"DDB_BARC0", DDB_BASE + DDB_BARC0},
- {"DDB_BARM010", DDB_BASE + DDB_BARM010},
- {"DDB_BARM230", DDB_BASE + DDB_BARM230},
- {"DDB_BAR00", DDB_BASE + DDB_BAR00},
- {"DDB_BAR10", DDB_BASE + DDB_BAR10},
- {"DDB_BAR20", DDB_BASE + DDB_BAR20},
- {"DDB_BAR30", DDB_BASE + DDB_BAR30},
- {"DDB_BAR40", DDB_BASE + DDB_BAR40},
- {"DDB_BAR50", DDB_BASE + DDB_BAR50},
- {"DDB_BARB0", DDB_BASE + DDB_BARB0},
- {"DDB_BARC1", DDB_BASE + DDB_BARC1},
- {"DDB_BARM011", DDB_BASE + DDB_BARM011},
- {"DDB_BARM231", DDB_BASE + DDB_BARM231},
- {"DDB_BAR01", DDB_BASE + DDB_BAR01},
- {"DDB_BAR11", DDB_BASE + DDB_BAR11},
- {"DDB_BAR21", DDB_BASE + DDB_BAR21},
- {"DDB_BAR31", DDB_BASE + DDB_BAR31},
- {"DDB_BAR41", DDB_BASE + DDB_BAR41},
- {"DDB_BAR51", DDB_BASE + DDB_BAR51},
- {"DDB_BARB1", DDB_BASE + DDB_BARB1},
- {NULL, 0x0}
-};
-void vrc5477_show_bar_regs(void)
-{
- jsun_show_regs("BAR regs", bar_regs);
-}
-
-static Register pci_regs[] = {
- {"DDB_PCIW0", DDB_BASE + DDB_PCIW0},
- {"DDB_PCIW1", DDB_BASE + DDB_PCIW1},
- {"DDB_PCIINIT00", DDB_BASE + DDB_PCIINIT00},
- {"DDB_PCIINIT10", DDB_BASE + DDB_PCIINIT10},
- {"DDB_PCICTL0_L", DDB_BASE + DDB_PCICTL0_L},
- {"DDB_PCICTL0_H", DDB_BASE + DDB_PCICTL0_H},
- {"DDB_PCIARB0_L", DDB_BASE + DDB_PCIARB0_L},
- {"DDB_PCIARB0_H", DDB_BASE + DDB_PCIARB0_H},
- {"DDB_PCISWP0", DDB_BASE + DDB_PCISWP0},
- {"DDB_PCIERR0", DDB_BASE + DDB_PCIERR0},
- {"DDB_IOPCIW0", DDB_BASE + DDB_IOPCIW0},
- {"DDB_IOPCIW1", DDB_BASE + DDB_IOPCIW1},
- {"DDB_PCIINIT01", DDB_BASE + DDB_PCIINIT01},
- {"DDB_PCIINIT11", DDB_BASE + DDB_PCIINIT11},
- {"DDB_PCICTL1_L", DDB_BASE + DDB_PCICTL1_L},
- {"DDB_PCICTL1_H", DDB_BASE + DDB_PCICTL1_H},
- {"DDB_PCIARB1_L", DDB_BASE + DDB_PCIARB1_L},
- {"DDB_PCIARB1_H", DDB_BASE + DDB_PCIARB1_H},
- {"DDB_PCISWP1", DDB_BASE + DDB_PCISWP1},
- {"DDB_PCIERR1", DDB_BASE + DDB_PCIERR1},
- {NULL, 0x0}
-};
-void vrc5477_show_pci_regs(void)
-{
- jsun_show_regs("PCI regs", pci_regs);
-}
-
-static Register lb_regs[] = {
- {"DDB_LCNFG", DDB_BASE + DDB_LCNFG},
- {"DDB_LCST0", DDB_BASE + DDB_LCST0},
- {"DDB_LCST1", DDB_BASE + DDB_LCST1},
- {"DDB_LCST2", DDB_BASE + DDB_LCST2},
- {"DDB_ERRADR", DDB_BASE + DDB_ERRADR},
- {"DDB_ERRCS", DDB_BASE + DDB_ERRCS},
- {"DDB_BTM", DDB_BASE + DDB_BTM},
- {"DDB_BCST", DDB_BASE + DDB_BCST},
- {NULL, 0x0}
-};
-void vrc5477_show_lb_regs(void)
-{
- jsun_show_regs("Local Bus regs", lb_regs);
-}
-
-void vrc5477_show_all_regs(void)
-{
- vrc5477_show_pdar_regs();
- vrc5477_show_pci_regs();
- vrc5477_show_bar_regs();
- vrc5477_show_int_regs();
- vrc5477_show_lb_regs();
-}
diff --git a/arch/mips/ddb5xxx/ddb5477/irq.c b/arch/mips/ddb5xxx/ddb5477/irq.c
deleted file mode 100644
index faa4a50..0000000
--- a/arch/mips/ddb5xxx/ddb5477/irq.c
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * arch/mips/ddb5xxx/ddb5477/irq.c
- * The irq setup and misc routines for DDB5476.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-
-#include <asm/i8259.h>
-#include <asm/irq_cpu.h>
-#include <asm/system.h>
-#include <asm/mipsregs.h>
-#include <asm/debug.h>
-#include <asm/addrspace.h>
-#include <asm/bootinfo.h>
-
-#include <asm/ddb5xxx/ddb5xxx.h>
-
-
-/*
- * IRQ mapping
- *
- * 0-7: 8 CPU interrupts
- * 0 - software interrupt 0
- * 1 - software interrupt 1
- * 2 - most Vrc5477 interrupts are routed to this pin
- * 3 - (optional) some other interrupts routed to this pin for debugg
- * 4 - not used
- * 5 - not used
- * 6 - not used
- * 7 - cpu timer (used by default)
- *
- * 8-39: 32 Vrc5477 interrupt sources
- * (refer to the Vrc5477 manual)
- */
-
-#define PCI0 DDB_INTPPES0
-#define PCI1 DDB_INTPPES1
-
-#define ACTIVE_LOW 1
-#define ACTIVE_HIGH 0
-
-#define LEVEL_SENSE 2
-#define EDGE_TRIGGER 0
-
-#define INTA 0
-#define INTB 1
-#define INTC 2
-#define INTD 3
-#define INTE 4
-
-static inline void
-set_pci_int_attr(u32 pci, u32 intn, u32 active, u32 trigger)
-{
- u32 reg_value;
- u32 reg_bitmask;
-
- reg_value = ddb_in32(pci);
- reg_bitmask = 0x3 << (intn * 2);
-
- reg_value &= ~reg_bitmask;
- reg_value |= (active | trigger) << (intn * 2);
- ddb_out32(pci, reg_value);
-}
-
-extern void vrc5477_irq_init(u32 base);
-static struct irqaction irq_cascade = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL };
-
-void __init arch_init_irq(void)
-{
- /* by default, we disable all interrupts and route all vrc5477
- * interrupts to pin 0 (irq 2) */
- ddb_out32(DDB_INTCTRL0, 0);
- ddb_out32(DDB_INTCTRL1, 0);
- ddb_out32(DDB_INTCTRL2, 0);
- ddb_out32(DDB_INTCTRL3, 0);
-
- clear_c0_status(0xff00);
- set_c0_status(0x0400);
-
- /* setup PCI interrupt attributes */
- set_pci_int_attr(PCI0, INTA, ACTIVE_LOW, LEVEL_SENSE);
- set_pci_int_attr(PCI0, INTB, ACTIVE_LOW, LEVEL_SENSE);
- if (mips_machtype == MACH_NEC_ROCKHOPPERII)
- set_pci_int_attr(PCI0, INTC, ACTIVE_HIGH, LEVEL_SENSE);
- else
- set_pci_int_attr(PCI0, INTC, ACTIVE_LOW, LEVEL_SENSE);
- set_pci_int_attr(PCI0, INTD, ACTIVE_LOW, LEVEL_SENSE);
- set_pci_int_attr(PCI0, INTE, ACTIVE_LOW, LEVEL_SENSE);
-
- set_pci_int_attr(PCI1, INTA, ACTIVE_LOW, LEVEL_SENSE);
- set_pci_int_attr(PCI1, INTB, ACTIVE_LOW, LEVEL_SENSE);
- set_pci_int_attr(PCI1, INTC, ACTIVE_LOW, LEVEL_SENSE);
- set_pci_int_attr(PCI1, INTD, ACTIVE_LOW, LEVEL_SENSE);
- set_pci_int_attr(PCI1, INTE, ACTIVE_LOW, LEVEL_SENSE);
-
- /*
- * for debugging purpose, we enable several error interrupts
- * and route them to pin 1. (IP3)
- */
- /* cpu parity check - 0 */
- ll_vrc5477_irq_route(0, 1); ll_vrc5477_irq_enable(0);
- /* cpu no-target decode - 1 */
- ll_vrc5477_irq_route(1, 1); ll_vrc5477_irq_enable(1);
- /* local bus read time-out - 7 */
- ll_vrc5477_irq_route(7, 1); ll_vrc5477_irq_enable(7);
- /* PCI SERR# - 14 */
- ll_vrc5477_irq_route(14, 1); ll_vrc5477_irq_enable(14);
- /* PCI internal error - 15 */
- ll_vrc5477_irq_route(15, 1); ll_vrc5477_irq_enable(15);
- /* IOPCI SERR# - 30 */
- ll_vrc5477_irq_route(30, 1); ll_vrc5477_irq_enable(30);
- /* IOPCI internal error - 31 */
- ll_vrc5477_irq_route(31, 1); ll_vrc5477_irq_enable(31);
-
- /* init all controllers */
- init_i8259_irqs();
- mips_cpu_irq_init();
- vrc5477_irq_init(VRC5477_IRQ_BASE);
-
-
- /* setup cascade interrupts */
- setup_irq(VRC5477_IRQ_BASE + VRC5477_I8259_CASCADE, &irq_cascade);
- setup_irq(CPU_IRQ_BASE + CPU_VRC5477_CASCADE, &irq_cascade);
-}
-
-u8 i8259_interrupt_ack(void)
-{
- u8 irq;
- u32 reg;
-
- /* Set window 0 for interrupt acknowledge */
- reg = ddb_in32(DDB_PCIINIT10);
-
- ddb_set_pmr(DDB_PCIINIT10, DDB_PCICMD_IACK, 0, DDB_PCI_ACCESS_32);
- irq = *(volatile u8 *) KSEG1ADDR(DDB_PCI_IACK_BASE);
- ddb_out32(DDB_PCIINIT10, reg);
-
- return irq;
-}
-/*
- * the first level int-handler will jump here if it is a vrc5477 irq
- */
-#define NUM_5477_IRQS 32
-static void vrc5477_irq_dispatch(void)
-{
- u32 intStatus;
- u32 bitmask;
- u32 i;
-
- db_assert(ddb_in32(DDB_INT2STAT) == 0);
- db_assert(ddb_in32(DDB_INT3STAT) == 0);
- db_assert(ddb_in32(DDB_INT4STAT) == 0);
- db_assert(ddb_in32(DDB_NMISTAT) == 0);
-
- if (ddb_in32(DDB_INT1STAT) != 0) {
-#if defined(CONFIG_RUNTIME_DEBUG)
- vrc5477_show_int_regs();
-#endif
- panic("error interrupt has happened.");
- }
-
- intStatus = ddb_in32(DDB_INT0STAT);
-
- if (mips_machtype == MACH_NEC_ROCKHOPPERII) {
- /* check for i8259 interrupts */
- if (intStatus & (1 << VRC5477_I8259_CASCADE)) {
- int i8259_irq = i8259_interrupt_ack();
- do_IRQ(i8259_irq);
- return;
- }
- }
-
- for (i=0, bitmask=1; i<= NUM_5477_IRQS; bitmask <<=1, i++) {
- /* do we need to "and" with the int mask? */
- if (intStatus & bitmask) {
- do_IRQ(VRC5477_IRQ_BASE + i);
- return;
- }
- }
-}
-
-#define VR5477INTS (STATUSF_IP2|STATUSF_IP3|STATUSF_IP4|STATUSF_IP5|STATUSF_IP6)
-
-asmlinkage void plat_irq_dispatch(void)
-{
- unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
-
- if (pending & STATUSF_IP7)
- do_IRQ(CPU_IRQ_BASE + 7);
- else if (pending & VR5477INTS)
- vrc5477_irq_dispatch();
- else if (pending & STATUSF_IP0)
- do_IRQ(CPU_IRQ_BASE);
- else if (pending & STATUSF_IP1)
- do_IRQ(CPU_IRQ_BASE + 1);
- else
- spurious_interrupt();
-}
diff --git a/arch/mips/ddb5xxx/ddb5477/irq_5477.c b/arch/mips/ddb5xxx/ddb5477/irq_5477.c
deleted file mode 100644
index 98c3b15..0000000
--- a/arch/mips/ddb5xxx/ddb5477/irq_5477.c
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * arch/mips/ddb5xxx/ddb5477/irq_5477.c
- * This file defines the irq handler for Vrc5477.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-/*
- * Vrc5477 defines 32 IRQs.
- *
- * This file exports one function:
- * vrc5477_irq_init(u32 irq_base);
- */
-
-#include <linux/interrupt.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-
-#include <asm/debug.h>
-
-#include <asm/ddb5xxx/ddb5xxx.h>
-
-/* number of total irqs supported by Vrc5477 */
-#define NUM_5477_IRQ 32
-
-static int vrc5477_irq_base = -1;
-
-
-static void
-vrc5477_irq_enable(unsigned int irq)
-{
- db_assert(vrc5477_irq_base != -1);
- db_assert(irq >= vrc5477_irq_base);
- db_assert(irq < vrc5477_irq_base+ NUM_5477_IRQ);
-
- ll_vrc5477_irq_enable(irq - vrc5477_irq_base);
-}
-
-static void
-vrc5477_irq_disable(unsigned int irq)
-{
- db_assert(vrc5477_irq_base != -1);
- db_assert(irq >= vrc5477_irq_base);
- db_assert(irq < vrc5477_irq_base + NUM_5477_IRQ);
-
- ll_vrc5477_irq_disable(irq - vrc5477_irq_base);
-}
-
-static void
-vrc5477_irq_ack(unsigned int irq)
-{
- db_assert(vrc5477_irq_base != -1);
- db_assert(irq >= vrc5477_irq_base);
- db_assert(irq < vrc5477_irq_base+ NUM_5477_IRQ);
-
- /* clear the interrupt bit */
- /* some irqs require the driver to clear the sources */
- ddb_out32(DDB_INTCLR32, 1 << (irq - vrc5477_irq_base));
-
- /* disable interrupt - some handler will re-enable the irq
- * and if the interrupt is leveled, we will have infinite loop
- */
- ll_vrc5477_irq_disable(irq - vrc5477_irq_base);
-}
-
-static void
-vrc5477_irq_end(unsigned int irq)
-{
- db_assert(vrc5477_irq_base != -1);
- db_assert(irq >= vrc5477_irq_base);
- db_assert(irq < vrc5477_irq_base + NUM_5477_IRQ);
-
- if(!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
- ll_vrc5477_irq_enable( irq - vrc5477_irq_base);
-}
-
-struct irq_chip vrc5477_irq_controller = {
- .name = "vrc5477_irq",
- .ack = vrc5477_irq_ack,
- .mask = vrc5477_irq_disable,
- .mask_ack = vrc5477_irq_ack,
- .unmask = vrc5477_irq_enable,
- .end = vrc5477_irq_end
-};
-
-void __init vrc5477_irq_init(u32 irq_base)
-{
- u32 i;
-
- for (i= irq_base; i< irq_base+ NUM_5477_IRQ; i++)
- set_irq_chip(i, &vrc5477_irq_controller);
-
- vrc5477_irq_base = irq_base;
-}
-
-void ll_vrc5477_irq_route(int vrc5477_irq, int ip)
-{
- u32 reg_value;
- u32 reg_bitmask;
- u32 reg_index;
-
- db_assert(vrc5477_irq >= 0);
- db_assert(vrc5477_irq < NUM_5477_IRQ);
- db_assert(ip >= 0);
- db_assert((ip < 5) || (ip == 6));
-
- reg_index = DDB_INTCTRL0 + vrc5477_irq/8*4;
- reg_value = ddb_in32(reg_index);
- reg_bitmask = 7 << (vrc5477_irq % 8 * 4);
- reg_value &= ~reg_bitmask;
- reg_value |= ip << (vrc5477_irq % 8 * 4);
- ddb_out32(reg_index, reg_value);
-}
-
-void ll_vrc5477_irq_enable(int vrc5477_irq)
-{
- u32 reg_value;
- u32 reg_bitmask;
- u32 reg_index;
-
- db_assert(vrc5477_irq >= 0);
- db_assert(vrc5477_irq < NUM_5477_IRQ);
-
- reg_index = DDB_INTCTRL0 + vrc5477_irq/8*4;
- reg_value = ddb_in32(reg_index);
- reg_bitmask = 8 << (vrc5477_irq % 8 * 4);
- db_assert((reg_value & reg_bitmask) == 0);
- ddb_out32(reg_index, reg_value | reg_bitmask);
-}
-
-void ll_vrc5477_irq_disable(int vrc5477_irq)
-{
- u32 reg_value;
- u32 reg_bitmask;
- u32 reg_index;
-
- db_assert(vrc5477_irq >= 0);
- db_assert(vrc5477_irq < NUM_5477_IRQ);
-
- reg_index = DDB_INTCTRL0 + vrc5477_irq/8*4;
- reg_value = ddb_in32(reg_index);
- reg_bitmask = 8 << (vrc5477_irq % 8 * 4);
-
- /* we assert that the interrupt is enabled (perhaps over-zealous) */
- db_assert( (reg_value & reg_bitmask) != 0);
- ddb_out32(reg_index, reg_value & ~reg_bitmask);
-}
diff --git a/arch/mips/ddb5xxx/ddb5477/kgdb_io.c b/arch/mips/ddb5xxx/ddb5477/kgdb_io.c
deleted file mode 100644
index 385bbdb..0000000
--- a/arch/mips/ddb5xxx/ddb5477/kgdb_io.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * kgdb io functions for DDB5477. We use the second serial port (upper one).
- *
- * Copyright (C) 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-/* ======================= CONFIG ======================== */
-
-/* [jsun] we use the second serial port for kdb */
-#define BASE 0xbfa04240
-#define MAX_BAUD 115200
-
-/* distance in bytes between two serial registers */
-#define REG_OFFSET 8
-
-/*
- * 0 - kgdb does serial init
- * 1 - kgdb skip serial init
- */
-static int remoteDebugInitialized = 0;
-
-/*
- * the default baud rate *if* kgdb does serial init
- */
-#define BAUD_DEFAULT UART16550_BAUD_38400
-
-/* ======================= END OF CONFIG ======================== */
-
-typedef unsigned char uint8;
-typedef unsigned int uint32;
-
-#define UART16550_BAUD_2400 2400
-#define UART16550_BAUD_4800 4800
-#define UART16550_BAUD_9600 9600
-#define UART16550_BAUD_19200 19200
-#define UART16550_BAUD_38400 38400
-#define UART16550_BAUD_57600 57600
-#define UART16550_BAUD_115200 115200
-
-#define UART16550_PARITY_NONE 0
-#define UART16550_PARITY_ODD 0x08
-#define UART16550_PARITY_EVEN 0x18
-#define UART16550_PARITY_MARK 0x28
-#define UART16550_PARITY_SPACE 0x38
-
-#define UART16550_DATA_5BIT 0x0
-#define UART16550_DATA_6BIT 0x1
-#define UART16550_DATA_7BIT 0x2
-#define UART16550_DATA_8BIT 0x3
-
-#define UART16550_STOP_1BIT 0x0
-#define UART16550_STOP_2BIT 0x4
-
-/* register offset */
-#define OFS_RCV_BUFFER 0
-#define OFS_TRANS_HOLD 0
-#define OFS_SEND_BUFFER 0
-#define OFS_INTR_ENABLE (1*REG_OFFSET)
-#define OFS_INTR_ID (2*REG_OFFSET)
-#define OFS_DATA_FORMAT (3*REG_OFFSET)
-#define OFS_LINE_CONTROL (3*REG_OFFSET)
-#define OFS_MODEM_CONTROL (4*REG_OFFSET)
-#define OFS_RS232_OUTPUT (4*REG_OFFSET)
-#define OFS_LINE_STATUS (5*REG_OFFSET)
-#define OFS_MODEM_STATUS (6*REG_OFFSET)
-#define OFS_RS232_INPUT (6*REG_OFFSET)
-#define OFS_SCRATCH_PAD (7*REG_OFFSET)
-
-#define OFS_DIVISOR_LSB (0*REG_OFFSET)
-#define OFS_DIVISOR_MSB (1*REG_OFFSET)
-
-
-/* memory-mapped read/write of the port */
-#define UART16550_READ(y) (*((volatile uint8*)(BASE + y)))
-#define UART16550_WRITE(y, z) ((*((volatile uint8*)(BASE + y))) = z)
-
-void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
-{
- /* disable interrupts */
- UART16550_WRITE(OFS_INTR_ENABLE, 0);
-
- /* set up baud rate */
- {
- uint32 divisor;
-
- /* set DIAB bit */
- UART16550_WRITE(OFS_LINE_CONTROL, 0x80);
-
- /* set divisor */
- divisor = MAX_BAUD / baud;
- UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff);
- UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00) >> 8);
-
- /* clear DIAB bit */
- UART16550_WRITE(OFS_LINE_CONTROL, 0x0);
- }
-
- /* set data format */
- UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop);
-}
-
-
-uint8 getDebugChar(void)
-{
- if (!remoteDebugInitialized) {
- remoteDebugInitialized = 1;
- debugInit(BAUD_DEFAULT,
- UART16550_DATA_8BIT,
- UART16550_PARITY_NONE, UART16550_STOP_1BIT);
- }
-
- while ((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0);
- return UART16550_READ(OFS_RCV_BUFFER);
-}
-
-
-int putDebugChar(uint8 byte)
-{
- if (!remoteDebugInitialized) {
- remoteDebugInitialized = 1;
- debugInit(BAUD_DEFAULT,
- UART16550_DATA_8BIT,
- UART16550_PARITY_NONE, UART16550_STOP_1BIT);
- }
-
- while ((UART16550_READ(OFS_LINE_STATUS) & 0x20) == 0);
- UART16550_WRITE(OFS_SEND_BUFFER, byte);
- return 1;
-}
diff --git a/arch/mips/ddb5xxx/ddb5477/lcd44780.c b/arch/mips/ddb5xxx/ddb5477/lcd44780.c
deleted file mode 100644
index 9510b9a..0000000
--- a/arch/mips/ddb5xxx/ddb5477/lcd44780.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * lcd44780.c
- * Simple "driver" for a memory-mapped 44780-style LCD display.
- *
- * Copyright 2001 Bradley D. LaRonde <brad@ltc.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#define LCD44780_COMMAND ((volatile unsigned char *)0xbe020000)
-#define LCD44780_DATA ((volatile unsigned char *)0xbe020001)
-
-#define LCD44780_4BIT_1LINE 0x20
-#define LCD44780_4BIT_2LINE 0x28
-#define LCD44780_8BIT_1LINE 0x30
-#define LCD44780_8BIT_2LINE 0x38
-#define LCD44780_MODE_DEC 0x04
-#define LCD44780_MODE_DEC_SHIFT 0x05
-#define LCD44780_MODE_INC 0x06
-#define LCD44780_MODE_INC_SHIFT 0x07
-#define LCD44780_SCROLL_LEFT 0x18
-#define LCD44780_SCROLL_RIGHT 0x1e
-#define LCD44780_CURSOR_UNDERLINE 0x0e
-#define LCD44780_CURSOR_BLOCK 0x0f
-#define LCD44780_CURSOR_OFF 0x0c
-#define LCD44780_CLEAR 0x01
-#define LCD44780_BLANK 0x08
-#define LCD44780_RESTORE 0x0c // Same as CURSOR_OFF
-#define LCD44780_HOME 0x02
-#define LCD44780_LEFT 0x10
-#define LCD44780_RIGHT 0x14
-
-void lcd44780_wait(void)
-{
- int i, j;
- for(i=0; i < 400; i++)
- for(j=0; j < 10000; j++);
-}
-
-void lcd44780_command(unsigned char c)
-{
- *LCD44780_COMMAND = c;
- lcd44780_wait();
-}
-
-void lcd44780_data(unsigned char c)
-{
- *LCD44780_DATA = c;
- lcd44780_wait();
-}
-
-void lcd44780_puts(const char* s)
-{
- int j;
- int pos = 0;
-
- lcd44780_command(LCD44780_CLEAR);
- while(*s) {
- lcd44780_data(*s);
- s++;
- pos++;
- if (pos == 8) {
- /* We must write 32 of spaces to get cursor to 2nd line */
- for (j=0; j<32; j++) {
- lcd44780_data(' ');
- }
- }
- if (pos == 16) {
- /* We have filled all 16 character positions, so stop
- outputing data */
- break;
- }
- }
-#ifdef LCD44780_PUTS_PAUSE
- {
- int i;
-
- for(i = 1; i < 2000; i++)
- lcd44780_wait();
- }
-#endif
-}
-
-void lcd44780_init(void)
-{
- // The display on the RockHopper is physically a single
- // 16 char line (two 8 char lines concatenated). bdl
- lcd44780_command(LCD44780_8BIT_2LINE);
- lcd44780_command(LCD44780_MODE_INC);
- lcd44780_command(LCD44780_CURSOR_BLOCK);
- lcd44780_command(LCD44780_CLEAR);
-}
diff --git a/arch/mips/ddb5xxx/ddb5477/lcd44780.h b/arch/mips/ddb5xxx/ddb5477/lcd44780.h
deleted file mode 100644
index cf2f0f7..0000000
--- a/arch/mips/ddb5xxx/ddb5477/lcd44780.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * lcd44780.h
- * Simple "driver" for a memory-mapped 44780-style LCD display.
- *
- * Copyright 2001 Bradley D. LaRonde <brad@ltc.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-void lcd44780_puts(const char* s);
-void lcd44780_init(void);
diff --git a/arch/mips/ddb5xxx/ddb5477/setup.c b/arch/mips/ddb5xxx/ddb5477/setup.c
deleted file mode 100644
index f0cc0e8..0000000
--- a/arch/mips/ddb5xxx/ddb5477/setup.c
+++ /dev/null
@@ -1,399 +0,0 @@
-/*
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
- *
- * arch/mips/ddb5xxx/ddb5477/setup.c
- * Setup file for DDB5477.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/irq.h>
-#include <linux/fs.h>
-#include <linux/ioport.h>
-#include <linux/param.h> /* for HZ */
-#include <linux/major.h>
-#include <linux/kdev_t.h>
-#include <linux/root_dev.h>
-#include <linux/pm.h>
-
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-#include <asm/time.h>
-#include <asm/bcache.h>
-#include <asm/irq.h>
-#include <asm/reboot.h>
-#include <asm/gdb-stub.h>
-#include <asm/traps.h>
-#include <asm/debug.h>
-
-#include <asm/ddb5xxx/ddb5xxx.h>
-
-#include "lcd44780.h"
-
-
-#define USE_CPU_COUNTER_TIMER /* whether we use cpu counter */
-
-#define SP_TIMER_BASE DDB_SPT1CTRL_L
-#define SP_TIMER_IRQ VRC5477_IRQ_SPT1
-
-static int bus_frequency = CONFIG_DDB5477_BUS_FREQUENCY*1000;
-
-static void ddb_machine_restart(char *command)
-{
- static void (*back_to_prom) (void) = (void (*)(void)) 0xbfc00000;
-
- u32 t;
-
- /* PCI cold reset */
- ddb_pci_reset_bus();
-
- /* CPU cold reset */
- t = ddb_in32(DDB_CPUSTAT);
- db_assert((t&1));
- ddb_out32(DDB_CPUSTAT, t);
-
- /* Call the PROM */
- back_to_prom();
-}
-
-static void ddb_machine_halt(void)
-{
- printk("DDB Vrc-5477 halted.\n");
- while (1);
-}
-
-static void ddb_machine_power_off(void)
-{
- printk("DDB Vrc-5477 halted. Please turn off the power.\n");
- while (1);
-}
-
-extern void rtc_ds1386_init(unsigned long base);
-
-static unsigned int __init detect_bus_frequency(unsigned long rtc_base)
-{
- unsigned int freq;
- unsigned char c;
- unsigned int t1, t2;
- unsigned i;
-
- ddb_out32(SP_TIMER_BASE, 0xffffffff);
- ddb_out32(SP_TIMER_BASE+4, 0x1);
- ddb_out32(SP_TIMER_BASE+8, 0xffffffff);
-
- /* check if rtc is running */
- c= *(volatile unsigned char*)rtc_base;
- for(i=0; (c == *(volatile unsigned char*)rtc_base) && (i<100000000); i++);
- if (c == *(volatile unsigned char*)rtc_base) {
- printk("Failed to detect bus frequency. Use default 83.3MHz.\n");
- return 83333000;
- }
-
- c= *(volatile unsigned char*)rtc_base;
- while (c == *(volatile unsigned char*)rtc_base);
- /* we are now at the turn of 1/100th second, if no error. */
- t1 = ddb_in32(SP_TIMER_BASE+8);
-
- for (i=0; i< 10; i++) {
- c= *(volatile unsigned char*)rtc_base;
- while (c == *(volatile unsigned char*)rtc_base);
- /* we are now at the turn of another 1/100th second */
- t2 = ddb_in32(SP_TIMER_BASE+8);
- }
-
- ddb_out32(SP_TIMER_BASE+4, 0x0); /* disable it again */
-
- freq = (t1 - t2)*10;
- printk("DDB bus frequency detection : %u \n", freq);
- return freq;
-}
-
-static void __init ddb_time_init(void)
-{
- unsigned long rtc_base;
- unsigned int i;
-
- /* we have ds1396 RTC chip */
- if (mips_machtype == MACH_NEC_ROCKHOPPER
- || mips_machtype == MACH_NEC_ROCKHOPPERII) {
- rtc_base = KSEG1ADDR(DDB_LCS2_BASE);
- } else {
- rtc_base = KSEG1ADDR(DDB_LCS1_BASE);
- }
- rtc_ds1386_init(rtc_base);
-
- /* do we need to do run-time detection of bus speed? */
- if (bus_frequency == 0) {
- bus_frequency = detect_bus_frequency(rtc_base);
- }
-
- /* mips_hpt_frequency is 1/2 of the cpu core freq */
- i = (read_c0_config() >> 28 ) & 7;
- if ((current_cpu_data.cputype == CPU_R5432) && (i == 3))
- i = 4;
- mips_hpt_frequency = bus_frequency*(i+4)/4;
-}
-
-void __init plat_timer_setup(struct irqaction *irq)
-{
-#if defined(USE_CPU_COUNTER_TIMER)
-
- /* we are using the cpu counter for timer interrupts */
- setup_irq(CPU_IRQ_BASE + 7, irq);
-
-#else
-
- /* if we use Special purpose timer 1 */
- ddb_out32(SP_TIMER_BASE, bus_frequency/HZ);
- ddb_out32(SP_TIMER_BASE+4, 0x1);
- setup_irq(SP_TIMER_IRQ, irq);
-
-#endif
-}
-
-static void ddb5477_board_init(void);
-
-extern struct pci_controller ddb5477_ext_controller;
-extern struct pci_controller ddb5477_io_controller;
-
-void __init plat_mem_setup(void)
-{
- /* initialize board - we don't trust the loader */
- ddb5477_board_init();
-
- set_io_port_base(KSEG1ADDR(DDB_PCI_IO_BASE));
-
- board_time_init = ddb_time_init;
-
- _machine_restart = ddb_machine_restart;
- _machine_halt = ddb_machine_halt;
- pm_power_off = ddb_machine_power_off;
-
- /* setup resource limits */
- ioport_resource.end = DDB_PCI0_IO_SIZE + DDB_PCI1_IO_SIZE - 1;
- iomem_resource.end = 0xffffffff;
-
- /* Reboot on panic */
- panic_timeout = 180;
-
- register_pci_controller (&ddb5477_ext_controller);
- register_pci_controller (&ddb5477_io_controller);
-}
-
-static void __init ddb5477_board_init(void)
-{
- /* ----------- setup PDARs ------------ */
-
- /* SDRAM should have been set */
- db_assert(ddb_in32(DDB_SDRAM0) ==
- ddb_calc_pdar(DDB_SDRAM_BASE, board_ram_size, 32, 0, 1));
-
- /* SDRAM1 should be turned off. What is this for anyway ? */
- db_assert( (ddb_in32(DDB_SDRAM1) & 0xf) == 0);
-
- /* Setup local bus. */
-
- /* Flash U12 PDAR and timing. */
- ddb_set_pdar(DDB_LCS0, DDB_LCS0_BASE, DDB_LCS0_SIZE, 16, 0, 0);
- ddb_out32(DDB_LCST0, 0x00090842);
-
- /* We need to setup LCS1 and LCS2 differently based on the
- board_version */
- if (mips_machtype == MACH_NEC_ROCKHOPPER) {
- /* Flash U13 PDAR and timing. */
- ddb_set_pdar(DDB_LCS1, DDB_LCS1_BASE, DDB_LCS1_SIZE, 16, 0, 0);
- ddb_out32(DDB_LCST1, 0x00090842);
-
- /* EPLD (NVRAM, switch, LCD, and mezzanie). */
- ddb_set_pdar(DDB_LCS2, DDB_LCS2_BASE, DDB_LCS2_SIZE, 8, 0, 0);
- } else {
- /* misc */
- ddb_set_pdar(DDB_LCS1, DDB_LCS1_BASE, DDB_LCS1_SIZE, 8, 0, 0);
- /* mezzanie (?) */
- ddb_set_pdar(DDB_LCS2, DDB_LCS2_BASE, DDB_LCS2_SIZE, 16, 0, 0);
- }
-
- /* verify VRC5477 base addr */
- db_assert(ddb_in32(DDB_VRC5477) ==
- ddb_calc_pdar(DDB_VRC5477_BASE, DDB_VRC5477_SIZE, 32, 0, 1));
-
- /* verify BOOT ROM addr */
- db_assert(ddb_in32(DDB_BOOTCS) ==
- ddb_calc_pdar(DDB_BOOTCS_BASE, DDB_BOOTCS_SIZE, 8, 0, 0));
-
- /* setup PCI windows - window0 for MEM/config, window1 for IO */
- ddb_set_pdar(DDB_PCIW0, DDB_PCI0_MEM_BASE, DDB_PCI0_MEM_SIZE, 32, 0, 1);
- ddb_set_pdar(DDB_PCIW1, DDB_PCI0_IO_BASE, DDB_PCI0_IO_SIZE, 32, 0, 1);
- ddb_set_pdar(DDB_IOPCIW0, DDB_PCI1_MEM_BASE, DDB_PCI1_MEM_SIZE, 32, 0, 1);
- ddb_set_pdar(DDB_IOPCIW1, DDB_PCI1_IO_BASE, DDB_PCI1_IO_SIZE, 32, 0, 1);
-
- /* ------------ reset PCI bus and BARs ----------------- */
- ddb_pci_reset_bus();
-
- ddb_out32(DDB_BARM010, 0x00000008);
- ddb_out32(DDB_BARM011, 0x00000008);
-
- ddb_out32(DDB_BARC0, 0xffffffff);
- ddb_out32(DDB_BARM230, 0xffffffff);
- ddb_out32(DDB_BAR00, 0xffffffff);
- ddb_out32(DDB_BAR10, 0xffffffff);
- ddb_out32(DDB_BAR20, 0xffffffff);
- ddb_out32(DDB_BAR30, 0xffffffff);
- ddb_out32(DDB_BAR40, 0xffffffff);
- ddb_out32(DDB_BAR50, 0xffffffff);
- ddb_out32(DDB_BARB0, 0xffffffff);
-
- ddb_out32(DDB_BARC1, 0xffffffff);
- ddb_out32(DDB_BARM231, 0xffffffff);
- ddb_out32(DDB_BAR01, 0xffffffff);
- ddb_out32(DDB_BAR11, 0xffffffff);
- ddb_out32(DDB_BAR21, 0xffffffff);
- ddb_out32(DDB_BAR31, 0xffffffff);
- ddb_out32(DDB_BAR41, 0xffffffff);
- ddb_out32(DDB_BAR51, 0xffffffff);
- ddb_out32(DDB_BARB1, 0xffffffff);
-
- /*
- * We use pci master register 0 for memory space / config space
- * And we use register 1 for IO space.
- * Note that for memory space, we bump up the pci base address
- * so that we have 1:1 mapping between PCI memory and cpu physical.
- * For PCI IO space, it starts from 0 in PCI IO space but with
- * DDB_xx_IO_BASE in CPU physical address space.
- */
- ddb_set_pmr(DDB_PCIINIT00, DDB_PCICMD_MEM, DDB_PCI0_MEM_BASE,
- DDB_PCI_ACCESS_32);
- ddb_set_pmr(DDB_PCIINIT10, DDB_PCICMD_IO, 0, DDB_PCI_ACCESS_32);
-
- ddb_set_pmr(DDB_PCIINIT01, DDB_PCICMD_MEM, DDB_PCI1_MEM_BASE,
- DDB_PCI_ACCESS_32);
- ddb_set_pmr(DDB_PCIINIT11, DDB_PCICMD_IO, DDB_PCI0_IO_SIZE,
- DDB_PCI_ACCESS_32);
-
-
- /* PCI cross window should be set properly */
- ddb_set_pdar(DDB_BARP00, DDB_PCI1_MEM_BASE, DDB_PCI1_MEM_SIZE, 32, 0, 1);
- ddb_set_pdar(DDB_BARP10, DDB_PCI1_IO_BASE, DDB_PCI1_IO_SIZE, 32, 0, 1);
- ddb_set_pdar(DDB_BARP01, DDB_PCI0_MEM_BASE, DDB_PCI0_MEM_SIZE, 32, 0, 1);
- ddb_set_pdar(DDB_BARP11, DDB_PCI0_IO_BASE, DDB_PCI0_IO_SIZE, 32, 0, 1);
-
- if (mips_machtype == MACH_NEC_ROCKHOPPER
- || mips_machtype == MACH_NEC_ROCKHOPPERII) {
- /* Disable bus diagnostics. */
- ddb_out32(DDB_PCICTL0_L, 0);
- ddb_out32(DDB_PCICTL0_H, 0);
- ddb_out32(DDB_PCICTL1_L, 0);
- ddb_out32(DDB_PCICTL1_H, 0);
- }
-
- if (mips_machtype == MACH_NEC_ROCKHOPPER) {
- u16 vid;
- struct pci_bus bus;
- struct pci_dev dev_m1533;
- extern struct pci_ops ddb5477_ext_pci_ops;
-
- bus.parent = NULL; /* we scan the top level only */
- bus.ops = &ddb5477_ext_pci_ops;
- dev_m1533.bus = &bus;
- dev_m1533.sysdata = NULL;
- dev_m1533.devfn = 7*8; // slot 7: M1533 SouthBridge.
- pci_read_config_word(&dev_m1533, 0, &vid);
- if (vid == PCI_VENDOR_ID_AL) {
- printk("Changing mips_machtype to MACH_NEC_ROCKHOPPERII\n");
- mips_machtype = MACH_NEC_ROCKHOPPERII;
- }
- }
-
- /* enable USB input buffers */
- ddb_out32(DDB_PIBMISC, 0x00000007);
-
- /* For dual-function pins, make them all non-GPIO */
- ddb_out32(DDB_GIUFUNSEL, 0x0);
- // ddb_out32(DDB_GIUFUNSEL, 0xfe0fcfff); /* NEC recommanded value */
-
- if (mips_machtype == MACH_NEC_ROCKHOPPERII) {
-
- /* enable IDE controller on Ali chip (south bridge) */
- u8 temp8;
- struct pci_bus bus;
- struct pci_dev dev_m1533;
- struct pci_dev dev_m5229;
- extern struct pci_ops ddb5477_ext_pci_ops;
-
- /* Setup M1535 registers */
- bus.parent = NULL; /* we scan the top level only */
- bus.ops = &ddb5477_ext_pci_ops;
- dev_m1533.bus = &bus;
- dev_m1533.sysdata = NULL;
- dev_m1533.devfn = 7*8; // slot 7: M1533 SouthBridge.
-
- /* setup IDE controller
- * enable IDE controller (bit 6 - 1)
- * IDE IDSEL to be addr:A15 (bit 4:5 - 11)
- * disable IDE ATA Secondary Bus Signal Pad Control (bit 3 - 0)
- * enable IDE ATA Primary Bus Signal Pad Control (bit 2 - 1)
- */
- pci_write_config_byte(&dev_m1533, 0x58, 0x74);
-
- /*
- * positive decode (bit6 -0)
- * enable IDE controler interrupt (bit 4 -1)
- * setup SIRQ to point to IRQ 14 (bit 3:0 - 1101)
- */
- pci_write_config_byte(&dev_m1533, 0x44, 0x1d);
-
- /* Setup M5229 registers */
- dev_m5229.bus = &bus;
- dev_m5229.sysdata = NULL;
- dev_m5229.devfn = 4*8; // slot 4 (AD15): M5229 IDE
-
- /*
- * enable IDE in the M5229 config register 0x50 (bit 0 - 1)
- * M5229 IDSEL is addr:15; see above setting
- */
- pci_read_config_byte(&dev_m5229, 0x50, &temp8);
- pci_write_config_byte(&dev_m5229, 0x50, temp8 | 0x1);
-
- /*
- * enable bus master (bit 2) and IO decoding (bit 0)
- */
- pci_read_config_byte(&dev_m5229, 0x04, &temp8);
- pci_write_config_byte(&dev_m5229, 0x04, temp8 | 0x5);
-
- /*
- * enable native, copied from arch/ppc/k2boot/head.S
- * TODO - need volatile, need to be portable
- */
- pci_write_config_byte(&dev_m5229, 0x09, 0xef);
-
- /* Set Primary Channel Command Block Timing */
- pci_write_config_byte(&dev_m5229, 0x59, 0x31);
-
- /*
- * Enable primary channel 40-pin cable
- * M5229 register 0x4a (bit 0)
- */
- pci_read_config_byte(&dev_m5229, 0x4a, &temp8);
- pci_write_config_byte(&dev_m5229, 0x4a, temp8 | 0x1);
- }
-
- if (mips_machtype == MACH_NEC_ROCKHOPPER
- || mips_machtype == MACH_NEC_ROCKHOPPERII) {
- printk("lcd44780: initializing\n");
- lcd44780_init();
- lcd44780_puts("MontaVista Linux");
- }
-}
generated by cgit v0.10.2 at 2024-11-03 11:20:43 (GMT)