diff options
Diffstat (limited to 'arch/mips/vr41xx/nec-cmbvr4133/m1535plus.c')
-rw-r--r-- | arch/mips/vr41xx/nec-cmbvr4133/m1535plus.c | 249 |
1 files changed, 0 insertions, 249 deletions
diff --git a/arch/mips/vr41xx/nec-cmbvr4133/m1535plus.c b/arch/mips/vr41xx/nec-cmbvr4133/m1535plus.c deleted file mode 100644 index 1341f32..0000000 --- a/arch/mips/vr41xx/nec-cmbvr4133/m1535plus.c +++ /dev/null @@ -1,249 +0,0 @@ -/* - * arch/mips/vr41xx/nec-cmbvr4133/m1535plus.c - * - * Initialize for ALi M1535+(included M5229 and M5237). - * - * Author: Yoichi Yuasa <yyuasa@mvista.com, or source@mvista.com> and - * Alex Sapkov <asapkov@ru.mvista.com> - * - * 2003-2004 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for NEC-CMBVR4133 in 2.6 - * Author: Manish Lachwani (mlachwani@mvista.com) - */ -#include <linux/init.h> -#include <linux/types.h> -#include <linux/serial.h> - -#include <asm/vr41xx/cmbvr4133.h> -#include <linux/pci.h> -#include <asm/io.h> - -#define CONFIG_PORT(port) ((port) ? 0x3f0 : 0x370) -#define DATA_PORT(port) ((port) ? 0x3f1 : 0x371) -#define INDEX_PORT(port) CONFIG_PORT(port) - -#define ENTER_CONFIG_MODE(port) \ - do { \ - outb_p(0x51, CONFIG_PORT(port)); \ - outb_p(0x23, CONFIG_PORT(port)); \ - } while(0) - -#define SELECT_LOGICAL_DEVICE(port, dev_no) \ - do { \ - outb_p(0x07, INDEX_PORT(port)); \ - outb_p((dev_no), DATA_PORT(port)); \ - } while(0) - -#define WRITE_CONFIG_DATA(port, index, data) \ - do { \ - outb_p((index), INDEX_PORT(port)); \ - outb_p((data), DATA_PORT(port)); \ - } while(0) - -#define EXIT_CONFIG_MODE(port) outb(0xbb, CONFIG_PORT(port)) - -#define PCI_CONFIG_ADDR KSEG1ADDR(0x0f000c18) -#define PCI_CONFIG_DATA KSEG1ADDR(0x0f000c14) - -#ifdef CONFIG_BLK_DEV_FD - -void __devinit ali_m1535plus_fdc_init(int port) -{ - ENTER_CONFIG_MODE(port); - SELECT_LOGICAL_DEVICE(port, 0); /* FDC */ - WRITE_CONFIG_DATA(port, 0x30, 0x01); /* FDC: enable */ - WRITE_CONFIG_DATA(port, 0x60, 0x03); /* I/O port base: 0x3f0 */ - WRITE_CONFIG_DATA(port, 0x61, 0xf0); - WRITE_CONFIG_DATA(port, 0x70, 0x06); /* IRQ: 6 */ - WRITE_CONFIG_DATA(port, 0x74, 0x02); /* DMA: channel 2 */ - WRITE_CONFIG_DATA(port, 0xf0, 0x08); - WRITE_CONFIG_DATA(port, 0xf1, 0x00); - WRITE_CONFIG_DATA(port, 0xf2, 0xff); - WRITE_CONFIG_DATA(port, 0xf4, 0x00); - EXIT_CONFIG_MODE(port); -} - -#endif - -void __devinit ali_m1535plus_parport_init(int port) -{ - ENTER_CONFIG_MODE(port); - SELECT_LOGICAL_DEVICE(port, 3); /* Parallel Port */ - WRITE_CONFIG_DATA(port, 0x30, 0x01); - WRITE_CONFIG_DATA(port, 0x60, 0x03); /* I/O port base: 0x378 */ - WRITE_CONFIG_DATA(port, 0x61, 0x78); - WRITE_CONFIG_DATA(port, 0x70, 0x07); /* IRQ: 7 */ - WRITE_CONFIG_DATA(port, 0x74, 0x04); /* DMA: None */ - WRITE_CONFIG_DATA(port, 0xf0, 0x8c); /* IRQ polarity: Active Low */ - WRITE_CONFIG_DATA(port, 0xf1, 0xc5); - EXIT_CONFIG_MODE(port); -} - -void __devinit ali_m1535plus_keyboard_init(int port) -{ - ENTER_CONFIG_MODE(port); - SELECT_LOGICAL_DEVICE(port, 7); /* KEYBOARD */ - WRITE_CONFIG_DATA(port, 0x30, 0x01); /* KEYBOARD: eable */ - WRITE_CONFIG_DATA(port, 0x70, 0x01); /* IRQ: 1 */ - WRITE_CONFIG_DATA(port, 0x72, 0x0c); /* PS/2 Mouse IRQ: 12 */ - WRITE_CONFIG_DATA(port, 0xf0, 0x00); - EXIT_CONFIG_MODE(port); -} - -void __devinit ali_m1535plus_hotkey_init(int port) -{ - ENTER_CONFIG_MODE(port); - SELECT_LOGICAL_DEVICE(port, 0xc); /* HOTKEY */ - WRITE_CONFIG_DATA(port, 0x30, 0x00); - WRITE_CONFIG_DATA(port, 0xf0, 0x35); - WRITE_CONFIG_DATA(port, 0xf1, 0x14); - WRITE_CONFIG_DATA(port, 0xf2, 0x11); - WRITE_CONFIG_DATA(port, 0xf3, 0x71); - WRITE_CONFIG_DATA(port, 0xf5, 0x05); - EXIT_CONFIG_MODE(port); -} - -void ali_m1535plus_init(struct pci_dev *dev) -{ - pci_write_config_byte(dev, 0x40, 0x18); /* PCI Interface Control */ - pci_write_config_byte(dev, 0x41, 0xc0); /* PS2 keyb & mouse enable */ - pci_write_config_byte(dev, 0x42, 0x41); /* ISA bus cycle control */ - pci_write_config_byte(dev, 0x43, 0x00); /* ISA bus cycle control 2 */ - pci_write_config_byte(dev, 0x44, 0x5d); /* IDE enable & IRQ 14 */ - pci_write_config_byte(dev, 0x45, 0x0b); /* PCI int polling mode */ - pci_write_config_byte(dev, 0x47, 0x00); /* BIOS chip select control */ - - /* IRQ routing */ - pci_write_config_byte(dev, 0x48, 0x03); /* INTA IRQ10, INTB disable */ - pci_write_config_byte(dev, 0x49, 0x00); /* INTC and INTD disable */ - pci_write_config_byte(dev, 0x4a, 0x00); /* INTE and INTF disable */ - pci_write_config_byte(dev, 0x4b, 0x90); /* Audio IRQ11, Modem disable */ - - pci_write_config_word(dev, 0x50, 0x4000); /* Parity check IDE enable */ - pci_write_config_word(dev, 0x52, 0x0000); /* USB & RTC disable */ - pci_write_config_word(dev, 0x54, 0x0002); /* ??? no info */ - pci_write_config_word(dev, 0x56, 0x0002); /* PCS1J signal disable */ - - pci_write_config_byte(dev, 0x59, 0x00); /* PCSDS */ - pci_write_config_byte(dev, 0x5a, 0x00); - pci_write_config_byte(dev, 0x5b, 0x00); - pci_write_config_word(dev, 0x5c, 0x0000); - pci_write_config_byte(dev, 0x5e, 0x00); - pci_write_config_byte(dev, 0x5f, 0x00); - pci_write_config_word(dev, 0x60, 0x0000); - - pci_write_config_byte(dev, 0x6c, 0x00); - pci_write_config_byte(dev, 0x6d, 0x48); /* ROM address mapping */ - pci_write_config_byte(dev, 0x6e, 0x00); /* ??? what for? */ - - pci_write_config_byte(dev, 0x70, 0x12); /* Serial IRQ control */ - pci_write_config_byte(dev, 0x71, 0xEF); /* DMA channel select */ - pci_write_config_byte(dev, 0x72, 0x03); /* USB IDSEL */ - pci_write_config_byte(dev, 0x73, 0x00); /* ??? no info */ - - /* - * IRQ setup ALi M5237 USB Host Controller - * IRQ: 9 - */ - pci_write_config_byte(dev, 0x74, 0x01); /* USB IRQ9 */ - - pci_write_config_byte(dev, 0x75, 0x1f); /* IDE2 IRQ 15 */ - pci_write_config_byte(dev, 0x76, 0x80); /* ACPI disable */ - pci_write_config_byte(dev, 0x77, 0x40); /* Modem disable */ - pci_write_config_dword(dev, 0x78, 0x20000000); /* Pin select 2 */ - pci_write_config_byte(dev, 0x7c, 0x00); /* Pin select 3 */ - pci_write_config_byte(dev, 0x81, 0x00); /* ID read/write control */ - pci_write_config_byte(dev, 0x90, 0x00); /* PCI PM block control */ - pci_write_config_word(dev, 0xa4, 0x0000); /* PMSCR */ - -#ifdef CONFIG_BLK_DEV_FD - ali_m1535plus_fdc_init(1); -#endif - - ali_m1535plus_keyboard_init(1); - ali_m1535plus_hotkey_init(1); -} - -static inline void ali_config_writeb(u8 reg, u8 val, int devfn) -{ - u32 data; - int shift; - - writel((1 << 16) | (devfn << 8) | (reg & 0xfc) | 1UL, PCI_CONFIG_ADDR); - data = readl(PCI_CONFIG_DATA); - - shift = (reg & 3) << 3; - data &= ~(0xff << shift); - data |= (((u32)val) << shift); - - writel(data, PCI_CONFIG_DATA); -} - -static inline u8 ali_config_readb(u8 reg, int devfn) -{ - u32 data; - - writel((1 << 16) | (devfn << 8) | (reg & 0xfc) | 1UL, PCI_CONFIG_ADDR); - data = readl(PCI_CONFIG_DATA); - - return (u8)(data >> ((reg & 3) << 3)); -} - -static inline u16 ali_config_readw(u8 reg, int devfn) -{ - u32 data; - - writel((1 << 16) | (devfn << 8) | (reg & 0xfc) | 1UL, PCI_CONFIG_ADDR); - data = readl(PCI_CONFIG_DATA); - - return (u16)(data >> ((reg & 2) << 3)); -} - -int vr4133_rockhopper = 0; -void __init ali_m5229_preinit(void) -{ - if (ali_config_readw(PCI_VENDOR_ID, 16) == PCI_VENDOR_ID_AL && - ali_config_readw(PCI_DEVICE_ID, 16) == PCI_DEVICE_ID_AL_M1533) { - printk(KERN_INFO "Found an NEC Rockhopper \n"); - vr4133_rockhopper = 1; - /* - * Enable ALi M5229 IDE Controller (both channels) - * IDSEL: A27 - */ - ali_config_writeb(0x58, 0x4c, 16); - } -} - -void __init ali_m5229_init(struct pci_dev *dev) -{ - /* - * Enable Primary/Secondary Channel Cable Detect 40-Pin - */ - pci_write_config_word(dev, 0x4a, 0xc023); - - /* - * Set only the 3rd byteis for the master IDE's cycle and - * enable Internal IDE Function - */ - pci_write_config_byte(dev, 0x50, 0x23); /* Class code attr register */ - - pci_write_config_byte(dev, 0x09, 0xff); /* Set native mode & stuff */ - pci_write_config_byte(dev, 0x52, 0x00); /* use timing registers */ - pci_write_config_byte(dev, 0x58, 0x02); /* Primary addr setup timing */ - pci_write_config_byte(dev, 0x59, 0x22); /* Primary cmd block timing */ - pci_write_config_byte(dev, 0x5a, 0x22); /* Pr drv 0 R/W timing */ - pci_write_config_byte(dev, 0x5b, 0x22); /* Pr drv 1 R/W timing */ - pci_write_config_byte(dev, 0x5c, 0x02); /* Sec addr setup timing */ - pci_write_config_byte(dev, 0x5d, 0x22); /* Sec cmd block timing */ - pci_write_config_byte(dev, 0x5e, 0x22); /* Sec drv 0 R/W timing */ - pci_write_config_byte(dev, 0x5f, 0x22); /* Sec drv 1 R/W timing */ - pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20); - pci_write_config_word(dev, PCI_COMMAND, - PCI_COMMAND_PARITY | PCI_COMMAND_MASTER | - PCI_COMMAND_IO); -} - |