1 files changed, 75 insertions, 89 deletions

diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 8384282..4ebb1f2 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -30,6 +30,7 @@
 #include <linux/irq.h>
 #include <linux/vmalloc.h>
 #include <linux/slab.h>
+#include <linux/vgaarb.h>
 
 #include <asm/processor.h>
 #include <asm/io.h>
@@ -358,7 +359,6 @@ static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp,
 				      enum pci_mmap_state mmap_state,
 				      int write_combine)
 {
-	unsigned long prot = pgprot_val(protection);
 
 	/* Write combine is always 0 on non-memory space mappings. On
 	 * memory space, if the user didn't pass 1, we check for a
@@ -375,9 +375,9 @@ static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp,
 
 	/* XXX would be nice to have a way to ask for write-through */
 	if (write_combine)
-		return pgprot_noncached_wc(prot);
+		return pgprot_noncached_wc(protection);
 	else
-		return pgprot_noncached(prot);
+		return pgprot_noncached(protection);
 }
 
 /*
@@ -657,15 +657,6 @@ void pci_resource_to_user(const struct pci_dev *dev, int bar,
  *     ranges. However, some machines (thanks Apple !) tend to split their
  *     space into lots of small contiguous ranges. So we have to coalesce.
  *
- *   - We can only cope with all memory ranges having the same offset
- *     between CPU addresses and PCI addresses. Unfortunately, some bridges
- *     are setup for a large 1:1 mapping along with a small "window" which
- *     maps PCI address 0 to some arbitrary high address of the CPU space in
- *     order to give access to the ISA memory hole.
- *     The way out of here that I've chosen for now is to always set the
- *     offset based on the first resource found, then override it if we
- *     have a different offset and the previous was set by an ISA hole.
- *
  *   - Some busses have IO space not starting at 0, which causes trouble with
  *     the way we do our IO resource renumbering. The code somewhat deals with
  *     it for 64 bits but I would expect problems on 32 bits.
@@ -680,10 +671,9 @@ void pci_process_bridge_OF_ranges(struct pci_controller *hose,
 	int rlen;
 	int pna = of_n_addr_cells(dev);
 	int np = pna + 5;
-	int memno = 0, isa_hole = -1;
+	int memno = 0;
 	u32 pci_space;
 	unsigned long long pci_addr, cpu_addr, pci_next, cpu_next, size;
-	unsigned long long isa_mb = 0;
 	struct resource *res;
 
 	printk(KERN_INFO "PCI host bridge %s %s ranges:\n",
@@ -777,30 +767,14 @@ void pci_process_bridge_OF_ranges(struct pci_controller *hose,
 			}
 			/* Handles ISA memory hole space here */
 			if (pci_addr == 0) {
-				isa_mb = cpu_addr;
-				isa_hole = memno;
 				if (primary || isa_mem_base == 0)
 					isa_mem_base = cpu_addr;
 				hose->isa_mem_phys = cpu_addr;
 				hose->isa_mem_size = size;
 			}
 
-			/* We get the PCI/Mem offset from the first range or
-			 * the, current one if the offset came from an ISA
-			 * hole. If they don't match, bugger.
-			 */
-			if (memno == 0 ||
-			    (isa_hole >= 0 && pci_addr != 0 &&
-			     hose->pci_mem_offset == isa_mb))
-				hose->pci_mem_offset = cpu_addr - pci_addr;
-			else if (pci_addr != 0 &&
-				 hose->pci_mem_offset != cpu_addr - pci_addr) {
-				printk(KERN_INFO
-				       " \\--> Skipped (offset mismatch) !\n");
-				continue;
-			}
-
 			/* Build resource */
+			hose->mem_offset[memno] = cpu_addr - pci_addr;
 			res = &hose->mem_resources[memno++];
 			res->flags = IORESOURCE_MEM;
 			if (pci_space & 0x40000000)
@@ -816,20 +790,6 @@ void pci_process_bridge_OF_ranges(struct pci_controller *hose,
 			res->child = NULL;
 		}
 	}
-
-	/* If there's an ISA hole and the pci_mem_offset is -not- matching
-	 * the ISA hole offset, then we need to remove the ISA hole from
-	 * the resource list for that brige
-	 */
-	if (isa_hole >= 0 && hose->pci_mem_offset != isa_mb) {
-		unsigned int next = isa_hole + 1;
-		printk(KERN_INFO " Removing ISA hole at 0x%016llx\n", isa_mb);
-		if (next < memno)
-			memmove(&hose->mem_resources[isa_hole],
-				&hose->mem_resources[next],
-				sizeof(struct resource) * (memno - next));
-		hose->mem_resources[--memno].flags = 0;
-	}
 }
 
 /* Decide whether to display the domain number in /proc */
@@ -844,6 +804,14 @@ int pci_proc_domain(struct pci_bus *bus)
 	return 1;
 }
 
+int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
+{
+	if (ppc_md.pcibios_root_bridge_prepare)
+		return ppc_md.pcibios_root_bridge_prepare(bridge);
+
+	return 0;
+}
+
 /* This header fixup will do the resource fixup for all devices as they are
  * probed, but not for bridge ranges
  */
@@ -859,6 +827,7 @@ static void pcibios_fixup_resources(struct pci_dev *dev)
 	}
 	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
 		struct resource *res = dev->resource + i;
+		struct pci_bus_region reg;
 		if (!res->flags)
 			continue;
 
@@ -867,8 +836,9 @@ static void pcibios_fixup_resources(struct pci_dev *dev)
 		 * at 0 as unset as well, except if PCI_PROBE_ONLY is also set
 		 * since in that case, we don't want to re-assign anything
 		 */
+		pcibios_resource_to_bus(dev, &reg, res);
 		if (pci_has_flag(PCI_REASSIGN_ALL_RSRC) ||
-		    (res->start == 0 && !pci_has_flag(PCI_PROBE_ONLY))) {
+		    (reg.start == 0 && !pci_has_flag(PCI_PROBE_ONLY))) {
 			/* Only print message if not re-assigning */
 			if (!pci_has_flag(PCI_REASSIGN_ALL_RSRC))
 				pr_debug("PCI:%s Resource %d %016llx-%016llx [%x] "
@@ -907,6 +877,7 @@ static int pcibios_uninitialized_bridge_resource(struct pci_bus *bus,
 	struct pci_controller *hose = pci_bus_to_host(bus);
 	struct pci_dev *dev = bus->self;
 	resource_size_t offset;
+	struct pci_bus_region region;
 	u16 command;
 	int i;
 
@@ -916,10 +887,10 @@ static int pcibios_uninitialized_bridge_resource(struct pci_bus *bus,
 
 	/* Job is a bit different between memory and IO */
 	if (res->flags & IORESOURCE_MEM) {
-		/* If the BAR is non-0 (res != pci_mem_offset) then it's probably been
-		 * initialized by somebody
-		 */
-		if (res->start != hose->pci_mem_offset)
+		pcibios_resource_to_bus(dev, &region, res);
+
+		/* If the BAR is non-0 then it's probably been initialized */
+		if (region.start != 0)
 			return 0;
 
 		/* The BAR is 0, let's check if memory decoding is enabled on
@@ -931,11 +902,11 @@ static int pcibios_uninitialized_bridge_resource(struct pci_bus *bus,
 
 		/* Memory decoding is enabled and the BAR is 0. If any of the bridge
 		 * resources covers that starting address (0 then it's good enough for
-		 * us for memory
+		 * us for memory space)
 		 */
 		for (i = 0; i < 3; i++) {
 			if ((hose->mem_resources[i].flags & IORESOURCE_MEM) &&
-			    hose->mem_resources[i].start == hose->pci_mem_offset)
+			    hose->mem_resources[i].start == hose->mem_offset[i])
 				return 0;
 		}
 
@@ -1023,7 +994,7 @@ void pcibios_setup_bus_self(struct pci_bus *bus)
 		ppc_md.pci_dma_bus_setup(bus);
 }
 
-void pcibios_setup_device(struct pci_dev *dev)
+static void pcibios_setup_device(struct pci_dev *dev)
 {
 	/* Fixup NUMA node as it may not be setup yet by the generic
 	 * code and is needed by the DMA init
@@ -1044,6 +1015,17 @@ void pcibios_setup_device(struct pci_dev *dev)
 		ppc_md.pci_irq_fixup(dev);
 }
 
+int pcibios_add_device(struct pci_dev *dev)
+{
+	/*
+	 * We can only call pcibios_setup_device() after bus setup is complete,
+	 * since some of the platform specific DMA setup code depends on it.
+	 */
+	if (dev->bus->is_added)
+		pcibios_setup_device(dev);
+	return 0;
+}
+
 void pcibios_setup_bus_devices(struct pci_bus *bus)
 {
 	struct pci_dev *dev;
@@ -1372,10 +1354,9 @@ static void __init pcibios_reserve_legacy_regions(struct pci_bus *bus)
 
  no_io:
 	/* Check for memory */
-	offset = hose->pci_mem_offset;
-	pr_debug("hose mem offset: %016llx\n", (unsigned long long)offset);
 	for (i = 0; i < 3; i++) {
 		pres = &hose->mem_resources[i];
+		offset = hose->mem_offset[i];
 		if (!(pres->flags & IORESOURCE_MEM))
 			continue;
 		pr_debug("hose mem res: %pR\n", pres);
@@ -1482,11 +1463,14 @@ void pcibios_finish_adding_to_bus(struct pci_bus *bus)
 	pcibios_allocate_bus_resources(bus);
 	pcibios_claim_one_bus(bus);
 
+	/* Fixup EEH */
+	eeh_add_device_tree_late(bus);
+
 	/* Add new devices to global lists.  Register in proc, sysfs. */
 	pci_bus_add_devices(bus);
 
-	/* Fixup EEH */
-	eeh_add_device_tree_late(bus);
+	/* sysfs files should only be added after devices are added */
+	eeh_add_sysfs_files(bus);
 }
 EXPORT_SYMBOL_GPL(pcibios_finish_adding_to_bus);
 
@@ -1512,6 +1496,7 @@ static void pcibios_setup_phb_resources(struct pci_controller *hose,
 					struct list_head *resources)
 {
 	struct resource *res;
+	resource_size_t offset;
 	int i;
 
 	/* Hookup PHB IO resource */
@@ -1521,49 +1506,38 @@ static void pcibios_setup_phb_resources(struct pci_controller *hose,
 		printk(KERN_WARNING "PCI: I/O resource not set for host"
 		       " bridge %s (domain %d)\n",
 		       hose->dn->full_name, hose->global_number);
-#ifdef CONFIG_PPC32
-		/* Workaround for lack of IO resource only on 32-bit */
-		res->start = (unsigned long)hose->io_base_virt - isa_io_base;
-		res->end = res->start + IO_SPACE_LIMIT;
-		res->flags = IORESOURCE_IO;
-#endif /* CONFIG_PPC32 */
-	}
+	} else {
+		offset = pcibios_io_space_offset(hose);
 
-	pr_debug("PCI: PHB IO resource    = %016llx-%016llx [%lx]\n",
-		 (unsigned long long)res->start,
-		 (unsigned long long)res->end,
-		 (unsigned long)res->flags);
-	pci_add_resource_offset(resources, res, pcibios_io_space_offset(hose));
+		pr_debug("PCI: PHB IO resource    = %08llx-%08llx [%lx] off 0x%08llx\n",
+			 (unsigned long long)res->start,
+			 (unsigned long long)res->end,
+			 (unsigned long)res->flags,
+			 (unsigned long long)offset);
+		pci_add_resource_offset(resources, res, offset);
+	}
 
 	/* Hookup PHB Memory resources */
 	for (i = 0; i < 3; ++i) {
 		res = &hose->mem_resources[i];
 		if (!res->flags) {
-			if (i > 0)
-				continue;
-			printk(KERN_ERR "PCI: Memory resource 0 not set for "
-			       "host bridge %s (domain %d)\n",
-			       hose->dn->full_name, hose->global_number);
-#ifdef CONFIG_PPC32
-			/* Workaround for lack of MEM resource only on 32-bit */
-			res->start = hose->pci_mem_offset;
-			res->end = (resource_size_t)-1LL;
-			res->flags = IORESOURCE_MEM;
-#endif /* CONFIG_PPC32 */
+			if (i == 0)
+				printk(KERN_ERR "PCI: Memory resource 0 not set for "
+				       "host bridge %s (domain %d)\n",
+				       hose->dn->full_name, hose->global_number);
+			continue;
 		}
+		offset = hose->mem_offset[i];
 
-		pr_debug("PCI: PHB MEM resource %d = %016llx-%016llx [%lx]\n", i,
+
+		pr_debug("PCI: PHB MEM resource %d = %08llx-%08llx [%lx] off 0x%08llx\n", i,
 			 (unsigned long long)res->start,
 			 (unsigned long long)res->end,
-			 (unsigned long)res->flags);
-		pci_add_resource_offset(resources, res, hose->pci_mem_offset);
-	}
-
-	pr_debug("PCI: PHB MEM offset     = %016llx\n",
-		 (unsigned long long)hose->pci_mem_offset);
-	pr_debug("PCI: PHB IO  offset     = %08lx\n",
-		 (unsigned long)hose->io_base_virt - _IO_BASE);
+			 (unsigned long)res->flags,
+			 (unsigned long long)offset);
 
+		pci_add_resource_offset(resources, res, offset);
+	}
 }
 
 /*
@@ -1731,3 +1705,15 @@ static void fixup_hide_host_resource_fsl(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MOTOROLA, PCI_ANY_ID, fixup_hide_host_resource_fsl);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_FREESCALE, PCI_ANY_ID, fixup_hide_host_resource_fsl);
+
+static void fixup_vga(struct pci_dev *pdev)
+{
+	u16 cmd;
+
+	pci_read_config_word(pdev, PCI_COMMAND, &cmd);
+	if ((cmd & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) || !vga_default_device())
+		vga_set_default_device(pdev);
+
+}
+DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID,
+			      PCI_CLASS_DISPLAY_VGA, 8, fixup_vga);