diff options
Diffstat (limited to 'arch/powerpc/platforms/powermac/cpufreq_64.c')
| -rw-r--r-- | arch/powerpc/platforms/powermac/cpufreq_64.c | 746 |
1 files changed, 0 insertions, 746 deletions
diff --git a/arch/powerpc/platforms/powermac/cpufreq_64.c b/arch/powerpc/platforms/powermac/cpufreq_64.c deleted file mode 100644 index 7ba4234..0000000 --- a/arch/powerpc/platforms/powermac/cpufreq_64.c +++ /dev/null @@ -1,746 +0,0 @@ -/* - * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org> - * and Markus Demleitner <msdemlei@cl.uni-heidelberg.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This driver adds basic cpufreq support for SMU & 970FX based G5 Macs, - * that is iMac G5 and latest single CPU desktop. - */ - -#undef DEBUG - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/sched.h> -#include <linux/cpufreq.h> -#include <linux/init.h> -#include <linux/completion.h> -#include <linux/mutex.h> -#include <asm/prom.h> -#include <asm/machdep.h> -#include <asm/irq.h> -#include <asm/sections.h> -#include <asm/cputable.h> -#include <asm/time.h> -#include <asm/smu.h> -#include <asm/pmac_pfunc.h> - -#define DBG(fmt...) pr_debug(fmt) - -/* see 970FX user manual */ - -#define SCOM_PCR 0x0aa001 /* PCR scom addr */ - -#define PCR_HILO_SELECT 0x80000000U /* 1 = PCR, 0 = PCRH */ -#define PCR_SPEED_FULL 0x00000000U /* 1:1 speed value */ -#define PCR_SPEED_HALF 0x00020000U /* 1:2 speed value */ -#define PCR_SPEED_QUARTER 0x00040000U /* 1:4 speed value */ -#define PCR_SPEED_MASK 0x000e0000U /* speed mask */ -#define PCR_SPEED_SHIFT 17 -#define PCR_FREQ_REQ_VALID 0x00010000U /* freq request valid */ -#define PCR_VOLT_REQ_VALID 0x00008000U /* volt request valid */ -#define PCR_TARGET_TIME_MASK 0x00006000U /* target time */ -#define PCR_STATLAT_MASK 0x00001f00U /* STATLAT value */ -#define PCR_SNOOPLAT_MASK 0x000000f0U /* SNOOPLAT value */ -#define PCR_SNOOPACC_MASK 0x0000000fU /* SNOOPACC value */ - -#define SCOM_PSR 0x408001 /* PSR scom addr */ -/* warning: PSR is a 64 bits register */ -#define PSR_CMD_RECEIVED 0x2000000000000000U /* command received */ -#define PSR_CMD_COMPLETED 0x1000000000000000U /* command completed */ -#define PSR_CUR_SPEED_MASK 0x0300000000000000U /* current speed */ -#define PSR_CUR_SPEED_SHIFT (56) - -/* - * The G5 only supports two frequencies (Quarter speed is not supported) - */ -#define CPUFREQ_HIGH 0 -#define CPUFREQ_LOW 1 - -static struct cpufreq_frequency_table g5_cpu_freqs[] = { - {CPUFREQ_HIGH, 0}, - {CPUFREQ_LOW, 0}, - {0, CPUFREQ_TABLE_END}, -}; - -static struct freq_attr* g5_cpu_freqs_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -/* Power mode data is an array of the 32 bits PCR values to use for - * the various frequencies, retrieved from the device-tree - */ -static int g5_pmode_cur; - -static void (*g5_switch_volt)(int speed_mode); -static int (*g5_switch_freq)(int speed_mode); -static int (*g5_query_freq)(void); - -static DEFINE_MUTEX(g5_switch_mutex); - -static unsigned long transition_latency; - -#ifdef CONFIG_PMAC_SMU - -static const u32 *g5_pmode_data; -static int g5_pmode_max; - -static struct smu_sdbp_fvt *g5_fvt_table; /* table of op. points */ -static int g5_fvt_count; /* number of op. points */ -static int g5_fvt_cur; /* current op. point */ - -/* - * SMU based voltage switching for Neo2 platforms - */ - -static void g5_smu_switch_volt(int speed_mode) -{ - struct smu_simple_cmd cmd; - - DECLARE_COMPLETION_ONSTACK(comp); - smu_queue_simple(&cmd, SMU_CMD_POWER_COMMAND, 8, smu_done_complete, - &comp, 'V', 'S', 'L', 'E', 'W', - 0xff, g5_fvt_cur+1, speed_mode); - wait_for_completion(&comp); -} - -/* - * Platform function based voltage/vdnap switching for Neo2 - */ - -static struct pmf_function *pfunc_set_vdnap0; -static struct pmf_function *pfunc_vdnap0_complete; - -static void g5_vdnap_switch_volt(int speed_mode) -{ - struct pmf_args args; - u32 slew, done = 0; - unsigned long timeout; - - slew = (speed_mode == CPUFREQ_LOW) ? 1 : 0; - args.count = 1; - args.u[0].p = &slew; - - pmf_call_one(pfunc_set_vdnap0, &args); - - /* It's an irq GPIO so we should be able to just block here, - * I'll do that later after I've properly tested the IRQ code for - * platform functions - */ - timeout = jiffies + HZ/10; - while(!time_after(jiffies, timeout)) { - args.count = 1; - args.u[0].p = &done; - pmf_call_one(pfunc_vdnap0_complete, &args); - if (done) - break; - msleep(1); - } - if (done == 0) - printk(KERN_WARNING "cpufreq: Timeout in clock slewing !\n"); -} - - -/* - * SCOM based frequency switching for 970FX rev3 - */ -static int g5_scom_switch_freq(int speed_mode) -{ - unsigned long flags; - int to; - - /* If frequency is going up, first ramp up the voltage */ - if (speed_mode < g5_pmode_cur) - g5_switch_volt(speed_mode); - - local_irq_save(flags); - - /* Clear PCR high */ - scom970_write(SCOM_PCR, 0); - /* Clear PCR low */ - scom970_write(SCOM_PCR, PCR_HILO_SELECT | 0); - /* Set PCR low */ - scom970_write(SCOM_PCR, PCR_HILO_SELECT | - g5_pmode_data[speed_mode]); - - /* Wait for completion */ - for (to = 0; to < 10; to++) { - unsigned long psr = scom970_read(SCOM_PSR); - - if ((psr & PSR_CMD_RECEIVED) == 0 && - (((psr >> PSR_CUR_SPEED_SHIFT) ^ - (g5_pmode_data[speed_mode] >> PCR_SPEED_SHIFT)) & 0x3) - == 0) - break; - if (psr & PSR_CMD_COMPLETED) - break; - udelay(100); - } - - local_irq_restore(flags); - - /* If frequency is going down, last ramp the voltage */ - if (speed_mode > g5_pmode_cur) - g5_switch_volt(speed_mode); - - g5_pmode_cur = speed_mode; - ppc_proc_freq = g5_cpu_freqs[speed_mode].frequency * 1000ul; - - return 0; -} - -static int g5_scom_query_freq(void) -{ - unsigned long psr = scom970_read(SCOM_PSR); - int i; - - for (i = 0; i <= g5_pmode_max; i++) - if ((((psr >> PSR_CUR_SPEED_SHIFT) ^ - (g5_pmode_data[i] >> PCR_SPEED_SHIFT)) & 0x3) == 0) - break; - return i; -} - -/* - * Fake voltage switching for platforms with missing support - */ - -static void g5_dummy_switch_volt(int speed_mode) -{ -} - -#endif /* CONFIG_PMAC_SMU */ - -/* - * Platform function based voltage switching for PowerMac7,2 & 7,3 - */ - -static struct pmf_function *pfunc_cpu0_volt_high; -static struct pmf_function *pfunc_cpu0_volt_low; -static struct pmf_function *pfunc_cpu1_volt_high; -static struct pmf_function *pfunc_cpu1_volt_low; - -static void g5_pfunc_switch_volt(int speed_mode) -{ - if (speed_mode == CPUFREQ_HIGH) { - if (pfunc_cpu0_volt_high) - pmf_call_one(pfunc_cpu0_volt_high, NULL); - if (pfunc_cpu1_volt_high) - pmf_call_one(pfunc_cpu1_volt_high, NULL); - } else { - if (pfunc_cpu0_volt_low) - pmf_call_one(pfunc_cpu0_volt_low, NULL); - if (pfunc_cpu1_volt_low) - pmf_call_one(pfunc_cpu1_volt_low, NULL); - } - msleep(10); /* should be faster , to fix */ -} - -/* - * Platform function based frequency switching for PowerMac7,2 & 7,3 - */ - -static struct pmf_function *pfunc_cpu_setfreq_high; -static struct pmf_function *pfunc_cpu_setfreq_low; -static struct pmf_function *pfunc_cpu_getfreq; -static struct pmf_function *pfunc_slewing_done; - -static int g5_pfunc_switch_freq(int speed_mode) -{ - struct pmf_args args; - u32 done = 0; - unsigned long timeout; - int rc; - - DBG("g5_pfunc_switch_freq(%d)\n", speed_mode); - - /* If frequency is going up, first ramp up the voltage */ - if (speed_mode < g5_pmode_cur) - g5_switch_volt(speed_mode); - - /* Do it */ - if (speed_mode == CPUFREQ_HIGH) - rc = pmf_call_one(pfunc_cpu_setfreq_high, NULL); - else - rc = pmf_call_one(pfunc_cpu_setfreq_low, NULL); - - if (rc) - printk(KERN_WARNING "cpufreq: pfunc switch error %d\n", rc); - - /* It's an irq GPIO so we should be able to just block here, - * I'll do that later after I've properly tested the IRQ code for - * platform functions - */ - timeout = jiffies + HZ/10; - while(!time_after(jiffies, timeout)) { - args.count = 1; - args.u[0].p = &done; - pmf_call_one(pfunc_slewing_done, &args); - if (done) - break; - msleep(1); - } - if (done == 0) - printk(KERN_WARNING "cpufreq: Timeout in clock slewing !\n"); - - /* If frequency is going down, last ramp the voltage */ - if (speed_mode > g5_pmode_cur) - g5_switch_volt(speed_mode); - - g5_pmode_cur = speed_mode; - ppc_proc_freq = g5_cpu_freqs[speed_mode].frequency * 1000ul; - - return 0; -} - -static int g5_pfunc_query_freq(void) -{ - struct pmf_args args; - u32 val = 0; - - args.count = 1; - args.u[0].p = &val; - pmf_call_one(pfunc_cpu_getfreq, &args); - return val ? CPUFREQ_HIGH : CPUFREQ_LOW; -} - - -/* - * Common interface to the cpufreq core - */ - -static int g5_cpufreq_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, g5_cpu_freqs); -} - -static int g5_cpufreq_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) -{ - unsigned int newstate = 0; - struct cpufreq_freqs freqs; - int rc; - - if (cpufreq_frequency_table_target(policy, g5_cpu_freqs, - target_freq, relation, &newstate)) - return -EINVAL; - - if (g5_pmode_cur == newstate) - return 0; - - mutex_lock(&g5_switch_mutex); - - freqs.old = g5_cpu_freqs[g5_pmode_cur].frequency; - freqs.new = g5_cpu_freqs[newstate].frequency; - - cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); - rc = g5_switch_freq(newstate); - cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); - - mutex_unlock(&g5_switch_mutex); - - return rc; -} - -static unsigned int g5_cpufreq_get_speed(unsigned int cpu) -{ - return g5_cpu_freqs[g5_pmode_cur].frequency; -} - -static int g5_cpufreq_cpu_init(struct cpufreq_policy *policy) -{ - policy->cpuinfo.transition_latency = transition_latency; - policy->cur = g5_cpu_freqs[g5_query_freq()].frequency; - /* secondary CPUs are tied to the primary one by the - * cpufreq core if in the secondary policy we tell it that - * it actually must be one policy together with all others. */ - cpumask_copy(policy->cpus, cpu_online_mask); - cpufreq_frequency_table_get_attr(g5_cpu_freqs, policy->cpu); - - return cpufreq_frequency_table_cpuinfo(policy, - g5_cpu_freqs); -} - - -static struct cpufreq_driver g5_cpufreq_driver = { - .name = "powermac", - .owner = THIS_MODULE, - .flags = CPUFREQ_CONST_LOOPS, - .init = g5_cpufreq_cpu_init, - .verify = g5_cpufreq_verify, - .target = g5_cpufreq_target, - .get = g5_cpufreq_get_speed, - .attr = g5_cpu_freqs_attr, -}; - - -#ifdef CONFIG_PMAC_SMU - -static int __init g5_neo2_cpufreq_init(struct device_node *cpus) -{ - struct device_node *cpunode; - unsigned int psize, ssize; - unsigned long max_freq; - char *freq_method, *volt_method; - const u32 *valp; - u32 pvr_hi; - int use_volts_vdnap = 0; - int use_volts_smu = 0; - int rc = -ENODEV; - - /* Check supported platforms */ - if (of_machine_is_compatible("PowerMac8,1") || - of_machine_is_compatible("PowerMac8,2") || - of_machine_is_compatible("PowerMac9,1")) - use_volts_smu = 1; - else if (of_machine_is_compatible("PowerMac11,2")) - use_volts_vdnap = 1; - else - return -ENODEV; - - /* Get first CPU node */ - for (cpunode = NULL; - (cpunode = of_get_next_child(cpus, cpunode)) != NULL;) { - const u32 *reg = of_get_property(cpunode, "reg", NULL); - if (reg == NULL || (*reg) != 0) - continue; - if (!strcmp(cpunode->type, "cpu")) - break; - } - if (cpunode == NULL) { - printk(KERN_ERR "cpufreq: Can't find any CPU 0 node\n"); - return -ENODEV; - } - - /* Check 970FX for now */ - valp = of_get_property(cpunode, "cpu-version", NULL); - if (!valp) { - DBG("No cpu-version property !\n"); - goto bail_noprops; - } - pvr_hi = (*valp) >> 16; - if (pvr_hi != 0x3c && pvr_hi != 0x44) { - printk(KERN_ERR "cpufreq: Unsupported CPU version\n"); - goto bail_noprops; - } - - /* Look for the powertune data in the device-tree */ - g5_pmode_data = of_get_property(cpunode, "power-mode-data",&psize); - if (!g5_pmode_data) { - DBG("No power-mode-data !\n"); - goto bail_noprops; - } - g5_pmode_max = psize / sizeof(u32) - 1; - - if (use_volts_smu) { - const struct smu_sdbp_header *shdr; - - /* Look for the FVT table */ - shdr = smu_get_sdb_partition(SMU_SDB_FVT_ID, NULL); - if (!shdr) - goto bail_noprops; - g5_fvt_table = (struct smu_sdbp_fvt *)&shdr[1]; - ssize = (shdr->len * sizeof(u32)) - - sizeof(struct smu_sdbp_header); - g5_fvt_count = ssize / sizeof(struct smu_sdbp_fvt); - g5_fvt_cur = 0; - - /* Sanity checking */ - if (g5_fvt_count < 1 || g5_pmode_max < 1) - goto bail_noprops; - - g5_switch_volt = g5_smu_switch_volt; - volt_method = "SMU"; - } else if (use_volts_vdnap) { - struct device_node *root; - - root = of_find_node_by_path("/"); - if (root == NULL) { - printk(KERN_ERR "cpufreq: Can't find root of " - "device tree\n"); - goto bail_noprops; - } - pfunc_set_vdnap0 = pmf_find_function(root, "set-vdnap0"); - pfunc_vdnap0_complete = - pmf_find_function(root, "slewing-done"); - if (pfunc_set_vdnap0 == NULL || - pfunc_vdnap0_complete == NULL) { - printk(KERN_ERR "cpufreq: Can't find required " - "platform function\n"); - goto bail_noprops; - } - - g5_switch_volt = g5_vdnap_switch_volt; - volt_method = "GPIO"; - } else { - g5_switch_volt = g5_dummy_switch_volt; - volt_method = "none"; - } - - /* - * From what I see, clock-frequency is always the maximal frequency. - * The current driver can not slew sysclk yet, so we really only deal - * with powertune steps for now. We also only implement full freq and - * half freq in this version. So far, I haven't yet seen a machine - * supporting anything else. - */ - valp = of_get_property(cpunode, "clock-frequency", NULL); - if (!valp) - return -ENODEV; - max_freq = (*valp)/1000; - g5_cpu_freqs[0].frequency = max_freq; - g5_cpu_freqs[1].frequency = max_freq/2; - - /* Set callbacks */ - transition_latency = 12000; - g5_switch_freq = g5_scom_switch_freq; - g5_query_freq = g5_scom_query_freq; - freq_method = "SCOM"; - - /* Force apply current frequency to make sure everything is in - * sync (voltage is right for example). Firmware may leave us with - * a strange setting ... - */ - g5_switch_volt(CPUFREQ_HIGH); - msleep(10); - g5_pmode_cur = -1; - g5_switch_freq(g5_query_freq()); - - printk(KERN_INFO "Registering G5 CPU frequency driver\n"); - printk(KERN_INFO "Frequency method: %s, Voltage method: %s\n", - freq_method, volt_method); - printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n", - g5_cpu_freqs[1].frequency/1000, - g5_cpu_freqs[0].frequency/1000, - g5_cpu_freqs[g5_pmode_cur].frequency/1000); - - rc = cpufreq_register_driver(&g5_cpufreq_driver); - - /* We keep the CPU node on hold... hopefully, Apple G5 don't have - * hotplug CPU with a dynamic device-tree ... - */ - return rc; - - bail_noprops: - of_node_put(cpunode); - - return rc; -} - -#endif /* CONFIG_PMAC_SMU */ - - -static int __init g5_pm72_cpufreq_init(struct device_node *cpus) -{ - struct device_node *cpuid = NULL, *hwclock = NULL, *cpunode = NULL; - const u8 *eeprom = NULL; - const u32 *valp; - u64 max_freq, min_freq, ih, il; - int has_volt = 1, rc = 0; - - DBG("cpufreq: Initializing for PowerMac7,2, PowerMac7,3 and" - " RackMac3,1...\n"); - - /* Get first CPU node */ - for (cpunode = NULL; - (cpunode = of_get_next_child(cpus, cpunode)) != NULL;) { - if (!strcmp(cpunode->type, "cpu")) - break; - } - if (cpunode == NULL) { - printk(KERN_ERR "cpufreq: Can't find any CPU node\n"); - return -ENODEV; - } - - /* Lookup the cpuid eeprom node */ - cpuid = of_find_node_by_path("/u3@0,f8000000/i2c@f8001000/cpuid@a0"); - if (cpuid != NULL) - eeprom = of_get_property(cpuid, "cpuid", NULL); - if (eeprom == NULL) { - printk(KERN_ERR "cpufreq: Can't find cpuid EEPROM !\n"); - rc = -ENODEV; - goto bail; - } - - /* Lookup the i2c hwclock */ - for (hwclock = NULL; - (hwclock = of_find_node_by_name(hwclock, "i2c-hwclock")) != NULL;){ - const char *loc = of_get_property(hwclock, - "hwctrl-location", NULL); - if (loc == NULL) - continue; - if (strcmp(loc, "CPU CLOCK")) - continue; - if (!of_get_property(hwclock, "platform-get-frequency", NULL)) - continue; - break; - } - if (hwclock == NULL) { - printk(KERN_ERR "cpufreq: Can't find i2c clock chip !\n"); - rc = -ENODEV; - goto bail; - } - - DBG("cpufreq: i2c clock chip found: %s\n", hwclock->full_name); - - /* Now get all the platform functions */ - pfunc_cpu_getfreq = - pmf_find_function(hwclock, "get-frequency"); - pfunc_cpu_setfreq_high = - pmf_find_function(hwclock, "set-frequency-high"); - pfunc_cpu_setfreq_low = - pmf_find_function(hwclock, "set-frequency-low"); - pfunc_slewing_done = - pmf_find_function(hwclock, "slewing-done"); - pfunc_cpu0_volt_high = - pmf_find_function(hwclock, "set-voltage-high-0"); - pfunc_cpu0_volt_low = - pmf_find_function(hwclock, "set-voltage-low-0"); - pfunc_cpu1_volt_high = - pmf_find_function(hwclock, "set-voltage-high-1"); - pfunc_cpu1_volt_low = - pmf_find_function(hwclock, "set-voltage-low-1"); - - /* Check we have minimum requirements */ - if (pfunc_cpu_getfreq == NULL || pfunc_cpu_setfreq_high == NULL || - pfunc_cpu_setfreq_low == NULL || pfunc_slewing_done == NULL) { - printk(KERN_ERR "cpufreq: Can't find platform functions !\n"); - rc = -ENODEV; - goto bail; - } - - /* Check that we have complete sets */ - if (pfunc_cpu0_volt_high == NULL || pfunc_cpu0_volt_low == NULL) { - pmf_put_function(pfunc_cpu0_volt_high); - pmf_put_function(pfunc_cpu0_volt_low); - pfunc_cpu0_volt_high = pfunc_cpu0_volt_low = NULL; - has_volt = 0; - } - if (!has_volt || - pfunc_cpu1_volt_high == NULL || pfunc_cpu1_volt_low == NULL) { - pmf_put_function(pfunc_cpu1_volt_high); - pmf_put_function(pfunc_cpu1_volt_low); - pfunc_cpu1_volt_high = pfunc_cpu1_volt_low = NULL; - } - - /* Note: The device tree also contains a "platform-set-values" - * function for which I haven't quite figured out the usage. It - * might have to be called on init and/or wakeup, I'm not too sure - * but things seem to work fine without it so far ... - */ - - /* Get max frequency from device-tree */ - valp = of_get_property(cpunode, "clock-frequency", NULL); - if (!valp) { - printk(KERN_ERR "cpufreq: Can't find CPU frequency !\n"); - rc = -ENODEV; - goto bail; - } - - max_freq = (*valp)/1000; - - /* Now calculate reduced frequency by using the cpuid input freq - * ratio. This requires 64 bits math unless we are willing to lose - * some precision - */ - ih = *((u32 *)(eeprom + 0x10)); - il = *((u32 *)(eeprom + 0x20)); - - /* Check for machines with no useful settings */ - if (il == ih) { - printk(KERN_WARNING "cpufreq: No low frequency mode available" - " on this model !\n"); - rc = -ENODEV; - goto bail; - } - - min_freq = 0; - if (ih != 0 && il != 0) - min_freq = (max_freq * il) / ih; - - /* Sanity check */ - if (min_freq >= max_freq || min_freq < 1000) { - printk(KERN_ERR "cpufreq: Can't calculate low frequency !\n"); - rc = -ENXIO; - goto bail; - } - g5_cpu_freqs[0].frequency = max_freq; - g5_cpu_freqs[1].frequency = min_freq; - - /* Set callbacks */ - transition_latency = CPUFREQ_ETERNAL; - g5_switch_volt = g5_pfunc_switch_volt; - g5_switch_freq = g5_pfunc_switch_freq; - g5_query_freq = g5_pfunc_query_freq; - - /* Force apply current frequency to make sure everything is in - * sync (voltage is right for example). Firmware may leave us with - * a strange setting ... - */ - g5_switch_volt(CPUFREQ_HIGH); - msleep(10); - g5_pmode_cur = -1; - g5_switch_freq(g5_query_freq()); - - printk(KERN_INFO "Registering G5 CPU frequency driver\n"); - printk(KERN_INFO "Frequency method: i2c/pfunc, " - "Voltage method: %s\n", has_volt ? "i2c/pfunc" : "none"); - printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n", - g5_cpu_freqs[1].frequency/1000, - g5_cpu_freqs[0].frequency/1000, - g5_cpu_freqs[g5_pmode_cur].frequency/1000); - - rc = cpufreq_register_driver(&g5_cpufreq_driver); - bail: - if (rc != 0) { - pmf_put_function(pfunc_cpu_getfreq); - pmf_put_function(pfunc_cpu_setfreq_high); - pmf_put_function(pfunc_cpu_setfreq_low); - pmf_put_function(pfunc_slewing_done); - pmf_put_function(pfunc_cpu0_volt_high); - pmf_put_function(pfunc_cpu0_volt_low); - pmf_put_function(pfunc_cpu1_volt_high); - pmf_put_function(pfunc_cpu1_volt_low); - } - of_node_put(hwclock); - of_node_put(cpuid); - of_node_put(cpunode); - - return rc; -} - -static int __init g5_cpufreq_init(void) -{ - struct device_node *cpus; - int rc = 0; - - cpus = of_find_node_by_path("/cpus"); - if (cpus == NULL) { - DBG("No /cpus node !\n"); - return -ENODEV; - } - - if (of_machine_is_compatible("PowerMac7,2") || - of_machine_is_compatible("PowerMac7,3") || - of_machine_is_compatible("RackMac3,1")) - rc = g5_pm72_cpufreq_init(cpus); -#ifdef CONFIG_PMAC_SMU - else - rc = g5_neo2_cpufreq_init(cpus); -#endif /* CONFIG_PMAC_SMU */ - - of_node_put(cpus); - return rc; -} - -module_init(g5_cpufreq_init); - - -MODULE_LICENSE("GPL"); |