summaryrefslogtreecommitdiff
path: root/arch/powerpc
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc')
-rw-r--r--arch/powerpc/boot/dts/p1022ds.dtsi16
-rw-r--r--arch/powerpc/platforms/85xx/p1022_ds.c106
2 files changed, 93 insertions, 29 deletions
diff --git a/arch/powerpc/boot/dts/p1022ds.dtsi b/arch/powerpc/boot/dts/p1022ds.dtsi
index 28c3637..c3344b0 100644
--- a/arch/powerpc/boot/dts/p1022ds.dtsi
+++ b/arch/powerpc/boot/dts/p1022ds.dtsi
@@ -33,22 +33,6 @@
*/
&board_lbc {
- /*
- * This node is used to access the pixis via "indirect" mode,
- * which is done by writing the pixis register index to chip
- * select 0 and the value to/from chip select 1. Indirect
- * mode is the only way to access the pixis when DIU video
- * is enabled. Note that this assumes that the first column
- * of the 'ranges' property above is the chip select number.
- */
- board-control@0,0 {
- compatible = "fsl,p1022ds-indirect-pixis";
- reg = <0x0 0x0 1 /* CS0 */
- 0x1 0x0 1>; /* CS1 */
- interrupt-parent = <&mpic>;
- interrupts = <8 0 0 0>;
- };
-
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c
index 74e310b..b4437ca 100644
--- a/arch/powerpc/platforms/85xx/p1022_ds.c
+++ b/arch/powerpc/platforms/85xx/p1022_ds.c
@@ -27,6 +27,7 @@
#include <sysdev/fsl_pci.h>
#include <asm/udbg.h>
#include <asm/fsl_guts.h>
+#include <asm/fsl_lbc.h>
#include "smp.h"
#include "mpc85xx.h"
@@ -142,17 +143,73 @@ static void p1022ds_set_gamma_table(enum fsl_diu_monitor_port port,
{
}
+struct fsl_law {
+ u32 lawbar;
+ u32 reserved1;
+ u32 lawar;
+ u32 reserved[5];
+};
+
+#define LAWBAR_MASK 0x00F00000
+#define LAWBAR_SHIFT 12
+
+#define LAWAR_EN 0x80000000
+#define LAWAR_TGT_MASK 0x01F00000
+#define LAW_TRGT_IF_LBC (0x04 << 20)
+
+#define LAWAR_MASK (LAWAR_EN | LAWAR_TGT_MASK)
+#define LAWAR_MATCH (LAWAR_EN | LAW_TRGT_IF_LBC)
+
+#define BR_BA 0xFFFF8000
+
+/*
+ * Map a BRx value to a physical address
+ *
+ * The localbus BRx registers only store the lower 32 bits of the address. To
+ * obtain the upper four bits, we need to scan the LAW table. The entry which
+ * maps to the localbus will contain the upper four bits.
+ */
+static phys_addr_t lbc_br_to_phys(const void *ecm, unsigned int count, u32 br)
+{
+#ifndef CONFIG_PHYS_64BIT
+ /*
+ * If we only have 32-bit addressing, then the BRx address *is* the
+ * physical address.
+ */
+ return br & BR_BA;
+#else
+ const struct fsl_law *law = ecm + 0xc08;
+ unsigned int i;
+
+ for (i = 0; i < count; i++) {
+ u64 lawbar = in_be32(&law[i].lawbar);
+ u32 lawar = in_be32(&law[i].lawar);
+
+ if ((lawar & LAWAR_MASK) == LAWAR_MATCH)
+ /* Extract the upper four bits */
+ return (br & BR_BA) | ((lawbar & LAWBAR_MASK) << 12);
+ }
+
+ return 0;
+#endif
+}
+
/**
* p1022ds_set_monitor_port: switch the output to a different monitor port
- *
*/
static void p1022ds_set_monitor_port(enum fsl_diu_monitor_port port)
{
struct device_node *guts_node;
- struct device_node *indirect_node = NULL;
+ struct device_node *lbc_node = NULL;
+ struct device_node *law_node = NULL;
struct ccsr_guts __iomem *guts;
+ struct fsl_lbc_regs *lbc = NULL;
+ void *ecm = NULL;
u8 __iomem *lbc_lcs0_ba = NULL;
u8 __iomem *lbc_lcs1_ba = NULL;
+ phys_addr_t cs0_addr, cs1_addr;
+ const __be32 *iprop;
+ unsigned int num_laws;
u8 b;
/* Map the global utilities registers. */
@@ -168,25 +225,43 @@ static void p1022ds_set_monitor_port(enum fsl_diu_monitor_port port)
goto exit;
}
- indirect_node = of_find_compatible_node(NULL, NULL,
- "fsl,p1022ds-indirect-pixis");
- if (!indirect_node) {
- pr_err("p1022ds: missing pixis indirect mode node\n");
+ lbc_node = of_find_compatible_node(NULL, NULL, "fsl,p1022-elbc");
+ if (!lbc_node) {
+ pr_err("p1022ds: missing localbus node\n");
goto exit;
}
- lbc_lcs0_ba = of_iomap(indirect_node, 0);
- if (!lbc_lcs0_ba) {
- pr_err("p1022ds: could not map localbus chip select 0\n");
+ lbc = of_iomap(lbc_node, 0);
+ if (!lbc) {
+ pr_err("p1022ds: could not map localbus node\n");
goto exit;
}
- lbc_lcs1_ba = of_iomap(indirect_node, 1);
- if (!lbc_lcs1_ba) {
- pr_err("p1022ds: could not map localbus chip select 1\n");
+ law_node = of_find_compatible_node(NULL, NULL, "fsl,ecm-law");
+ if (!law_node) {
+ pr_err("p1022ds: missing local access window node\n");
goto exit;
}
+ ecm = of_iomap(law_node, 0);
+ if (!ecm) {
+ pr_err("p1022ds: could not map local access window node\n");
+ goto exit;
+ }
+
+ iprop = of_get_property(law_node, "fsl,num-laws", 0);
+ if (!iprop) {
+ pr_err("p1022ds: LAW node is missing fsl,num-laws property\n");
+ goto exit;
+ }
+ num_laws = be32_to_cpup(iprop);
+
+ cs0_addr = lbc_br_to_phys(ecm, num_laws, in_be32(&lbc->bank[0].br));
+ cs1_addr = lbc_br_to_phys(ecm, num_laws, in_be32(&lbc->bank[1].br));
+
+ lbc_lcs0_ba = ioremap(cs0_addr, 1);
+ lbc_lcs1_ba = ioremap(cs1_addr, 1);
+
/* Make sure we're in indirect mode first. */
if ((in_be32(&guts->pmuxcr) & PMUXCR_ELBCDIU_MASK) !=
PMUXCR_ELBCDIU_DIU) {
@@ -254,10 +329,15 @@ exit:
iounmap(lbc_lcs1_ba);
if (lbc_lcs0_ba)
iounmap(lbc_lcs0_ba);
+ if (lbc)
+ iounmap(lbc);
+ if (ecm)
+ iounmap(ecm);
if (guts)
iounmap(guts);
- of_node_put(indirect_node);
+ of_node_put(law_node);
+ of_node_put(lbc_node);
of_node_put(guts_node);
}