diff options
Diffstat (limited to 'arch/powerpc')
-rw-r--r-- | arch/powerpc/kernel/Makefile | 2 | ||||
-rw-r--r-- | arch/powerpc/kernel/ppc_ksyms.c | 1 | ||||
-rw-r--r-- | arch/powerpc/kernel/semaphore.c | 135 | ||||
-rw-r--r-- | arch/powerpc/kernel/setup_32.c | 8 | ||||
-rw-r--r-- | arch/powerpc/platforms/82xx/ep8248e.c | 2 | ||||
-rw-r--r-- | arch/powerpc/platforms/pasemi/gpio_mdio.c | 2 | ||||
-rw-r--r-- | arch/powerpc/platforms/powermac/pci.c | 22 | ||||
-rw-r--r-- | arch/powerpc/platforms/powermac/pmac.h | 5 | ||||
-rw-r--r-- | arch/powerpc/platforms/powermac/setup.c | 8 | ||||
-rw-r--r-- | arch/powerpc/sysdev/fsl_soc.c | 5 |
10 files changed, 6 insertions, 184 deletions
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index c1baf9d..b9dbfff 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -12,7 +12,7 @@ CFLAGS_prom_init.o += -fPIC CFLAGS_btext.o += -fPIC endif -obj-y := semaphore.o cputable.o ptrace.o syscalls.o \ +obj-y := cputable.o ptrace.o syscalls.o \ irq.o align.o signal_32.o pmc.o vdso.o \ init_task.o process.o systbl.o idle.o \ signal.o diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index 9c98424..65d14e6 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -15,7 +15,6 @@ #include <linux/bitops.h> #include <asm/page.h> -#include <asm/semaphore.h> #include <asm/processor.h> #include <asm/cacheflush.h> #include <asm/uaccess.h> diff --git a/arch/powerpc/kernel/semaphore.c b/arch/powerpc/kernel/semaphore.c deleted file mode 100644 index 2f8c3c9..0000000 --- a/arch/powerpc/kernel/semaphore.c +++ /dev/null @@ -1,135 +0,0 @@ -/* - * PowerPC-specific semaphore code. - * - * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * April 2001 - Reworked by Paul Mackerras <paulus@samba.org> - * to eliminate the SMP races in the old version between the updates - * of `count' and `waking'. Now we use negative `count' values to - * indicate that some process(es) are waiting for the semaphore. - */ - -#include <linux/sched.h> -#include <linux/init.h> -#include <linux/module.h> - -#include <asm/atomic.h> -#include <asm/semaphore.h> -#include <asm/errno.h> - -/* - * Atomically update sem->count. - * This does the equivalent of the following: - * - * old_count = sem->count; - * tmp = MAX(old_count, 0) + incr; - * sem->count = tmp; - * return old_count; - */ -static inline int __sem_update_count(struct semaphore *sem, int incr) -{ - int old_count, tmp; - - __asm__ __volatile__("\n" -"1: lwarx %0,0,%3\n" -" srawi %1,%0,31\n" -" andc %1,%0,%1\n" -" add %1,%1,%4\n" - PPC405_ERR77(0,%3) -" stwcx. %1,0,%3\n" -" bne 1b" - : "=&r" (old_count), "=&r" (tmp), "=m" (sem->count) - : "r" (&sem->count), "r" (incr), "m" (sem->count) - : "cc"); - - return old_count; -} - -void __up(struct semaphore *sem) -{ - /* - * Note that we incremented count in up() before we came here, - * but that was ineffective since the result was <= 0, and - * any negative value of count is equivalent to 0. - * This ends up setting count to 1, unless count is now > 0 - * (i.e. because some other cpu has called up() in the meantime), - * in which case we just increment count. - */ - __sem_update_count(sem, 1); - wake_up(&sem->wait); -} -EXPORT_SYMBOL(__up); - -/* - * Note that when we come in to __down or __down_interruptible, - * we have already decremented count, but that decrement was - * ineffective since the result was < 0, and any negative value - * of count is equivalent to 0. - * Thus it is only when we decrement count from some value > 0 - * that we have actually got the semaphore. - */ -void __sched __down(struct semaphore *sem) -{ - struct task_struct *tsk = current; - DECLARE_WAITQUEUE(wait, tsk); - - __set_task_state(tsk, TASK_UNINTERRUPTIBLE); - add_wait_queue_exclusive(&sem->wait, &wait); - - /* - * Try to get the semaphore. If the count is > 0, then we've - * got the semaphore; we decrement count and exit the loop. - * If the count is 0 or negative, we set it to -1, indicating - * that we are asleep, and then sleep. - */ - while (__sem_update_count(sem, -1) <= 0) { - schedule(); - set_task_state(tsk, TASK_UNINTERRUPTIBLE); - } - remove_wait_queue(&sem->wait, &wait); - __set_task_state(tsk, TASK_RUNNING); - - /* - * If there are any more sleepers, wake one of them up so - * that it can either get the semaphore, or set count to -1 - * indicating that there are still processes sleeping. - */ - wake_up(&sem->wait); -} -EXPORT_SYMBOL(__down); - -int __sched __down_interruptible(struct semaphore * sem) -{ - int retval = 0; - struct task_struct *tsk = current; - DECLARE_WAITQUEUE(wait, tsk); - - __set_task_state(tsk, TASK_INTERRUPTIBLE); - add_wait_queue_exclusive(&sem->wait, &wait); - - while (__sem_update_count(sem, -1) <= 0) { - if (signal_pending(current)) { - /* - * A signal is pending - give up trying. - * Set sem->count to 0 if it is negative, - * since we are no longer sleeping. - */ - __sem_update_count(sem, 0); - retval = -EINTR; - break; - } - schedule(); - set_task_state(tsk, TASK_INTERRUPTIBLE); - } - remove_wait_queue(&sem->wait, &wait); - __set_task_state(tsk, TASK_RUNNING); - - wake_up(&sem->wait); - return retval; -} -EXPORT_SYMBOL(__down_interruptible); diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index cd870a8..06d918d 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -10,9 +10,6 @@ #include <linux/reboot.h> #include <linux/delay.h> #include <linux/initrd.h> -#if defined(CONFIG_IDE) || defined(CONFIG_IDE_MODULE) -#include <linux/ide.h> -#endif #include <linux/tty.h> #include <linux/bootmem.h> #include <linux/seq_file.h> @@ -51,11 +48,6 @@ extern void bootx_init(unsigned long r4, unsigned long phys); -#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) -struct ide_machdep_calls ppc_ide_md; -EXPORT_SYMBOL(ppc_ide_md); -#endif - int boot_cpuid; EXPORT_SYMBOL_GPL(boot_cpuid); int boot_cpuid_phys; diff --git a/arch/powerpc/platforms/82xx/ep8248e.c b/arch/powerpc/platforms/82xx/ep8248e.c index ba93d8a..d5770fd 100644 --- a/arch/powerpc/platforms/82xx/ep8248e.c +++ b/arch/powerpc/platforms/82xx/ep8248e.c @@ -138,7 +138,7 @@ static int __devinit ep8248e_mdio_probe(struct of_device *ofdev, bus->name = "ep8248e-mdio-bitbang"; bus->dev = &ofdev->dev; - bus->id = res.start; + snprintf(bus->id, MII_BUS_ID_SIZE, "%x", res.start); return mdiobus_register(bus); } diff --git a/arch/powerpc/platforms/pasemi/gpio_mdio.c b/arch/powerpc/platforms/pasemi/gpio_mdio.c index b465429..ab69554 100644 --- a/arch/powerpc/platforms/pasemi/gpio_mdio.c +++ b/arch/powerpc/platforms/pasemi/gpio_mdio.c @@ -241,7 +241,7 @@ static int __devinit gpio_mdio_probe(struct of_device *ofdev, new_bus->reset = &gpio_mdio_reset; prop = of_get_property(np, "reg", NULL); - new_bus->id = *prop; + snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", *prop); new_bus->priv = priv; new_bus->phy_mask = 0; diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c index 1c58db9..bcf50d7 100644 --- a/arch/powerpc/platforms/powermac/pci.c +++ b/arch/powerpc/platforms/powermac/pci.c @@ -1144,28 +1144,6 @@ void __init pmac_pcibios_after_init(void) { struct device_node* nd; -#ifdef CONFIG_BLK_DEV_IDE - struct pci_dev *dev = NULL; - - /* OF fails to initialize IDE controllers on macs - * (and maybe other machines) - * - * Ideally, this should be moved to the IDE layer, but we need - * to check specifically with Andre Hedrick how to do it cleanly - * since the common IDE code seem to care about the fact that the - * BIOS may have disabled a controller. - * - * -- BenH - */ - for_each_pci_dev(dev) { - if ((dev->class >> 16) != PCI_BASE_CLASS_STORAGE) - continue; - if (pci_enable_device(dev)) - printk(KERN_WARNING - "pci: Failed to enable %s\n", pci_name(dev)); - } -#endif /* CONFIG_BLK_DEV_IDE */ - for_each_node_by_name(nd, "firewire") { if (nd->parent && (of_device_is_compatible(nd, "pci106b,18") || of_device_is_compatible(nd, "pci106b,30") || diff --git a/arch/powerpc/platforms/powermac/pmac.h b/arch/powerpc/platforms/powermac/pmac.h index b3abaaf..3362e78 100644 --- a/arch/powerpc/platforms/powermac/pmac.h +++ b/arch/powerpc/platforms/powermac/pmac.h @@ -2,7 +2,6 @@ #define __PMAC_H__ #include <linux/pci.h> -#include <linux/ide.h> #include <linux/irq.h> /* @@ -35,10 +34,6 @@ extern void pmac_check_ht_link(void); extern void pmac_setup_smp(void); -extern unsigned long pmac_ide_get_base(int index); -extern void pmac_ide_init_hwif_ports(hw_regs_t *hw, - unsigned long data_port, unsigned long ctrl_port, int *irq); - extern int pmac_nvram_init(void); extern void pmac_pic_init(void); diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c index 36ff1b6..2693fc3 100644 --- a/arch/powerpc/platforms/powermac/setup.c +++ b/arch/powerpc/platforms/powermac/setup.c @@ -574,14 +574,6 @@ static int __init pmac_probe(void) ISA_DMA_THRESHOLD = ~0L; DMA_MODE_READ = 1; DMA_MODE_WRITE = 2; - -#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) -#ifdef CONFIG_BLK_DEV_IDE_PMAC - ppc_ide_md.ide_init_hwif = pmac_ide_init_hwif_ports; - ppc_ide_md.default_io_base = pmac_ide_get_base; -#endif /* CONFIG_BLK_DEV_IDE_PMAC */ -#endif /* defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) */ - #endif /* CONFIG_PPC32 */ #ifdef CONFIG_PMAC_SMU diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index 2c5388c..3581416 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -341,7 +341,7 @@ static int __init gfar_of_init(void) goto unreg; } - gfar_data.bus_id = 0; + snprintf(gfar_data.bus_id, MII_BUS_ID_SIZE, "0"); gfar_data.phy_id = fixed_link[0]; } else { phy = of_find_node_by_phandle(*ph); @@ -362,7 +362,8 @@ static int __init gfar_of_init(void) } gfar_data.phy_id = *id; - gfar_data.bus_id = res.start; + snprintf(gfar_data.bus_id, MII_BUS_ID_SIZE, "%x", + res.start); of_node_put(phy); of_node_put(mdio); |