diff options
Diffstat (limited to 'arch/tile/include/asm/system.h')
| -rw-r--r-- | arch/tile/include/asm/system.h | 265 |
1 files changed, 4 insertions, 261 deletions
diff --git a/arch/tile/include/asm/system.h b/arch/tile/include/asm/system.h index 23d1842..5b190b4 100644 --- a/arch/tile/include/asm/system.h +++ b/arch/tile/include/asm/system.h @@ -1,261 +1,4 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_SYSTEM_H -#define _ASM_TILE_SYSTEM_H - -#ifndef __ASSEMBLY__ - -#include <linux/types.h> -#include <linux/irqflags.h> - -/* NOTE: we can't include <linux/ptrace.h> due to #include dependencies. */ -#include <asm/ptrace.h> - -#include <arch/chip.h> -#include <arch/sim_def.h> -#include <arch/spr_def.h> - -/* - * read_barrier_depends - Flush all pending reads that subsequents reads - * depend on. - * - * No data-dependent reads from memory-like regions are ever reordered - * over this barrier. All reads preceding this primitive are guaranteed - * to access memory (but not necessarily other CPUs' caches) before any - * reads following this primitive that depend on the data return by - * any of the preceding reads. This primitive is much lighter weight than - * rmb() on most CPUs, and is never heavier weight than is - * rmb(). - * - * These ordering constraints are respected by both the local CPU - * and the compiler. - * - * Ordering is not guaranteed by anything other than these primitives, - * not even by data dependencies. See the documentation for - * memory_barrier() for examples and URLs to more information. - * - * For example, the following code would force ordering (the initial - * value of "a" is zero, "b" is one, and "p" is "&a"): - * - * <programlisting> - * CPU 0 CPU 1 - * - * b = 2; - * memory_barrier(); - * p = &b; q = p; - * read_barrier_depends(); - * d = *q; - * </programlisting> - * - * because the read of "*q" depends on the read of "p" and these - * two reads are separated by a read_barrier_depends(). However, - * the following code, with the same initial values for "a" and "b": - * - * <programlisting> - * CPU 0 CPU 1 - * - * a = 2; - * memory_barrier(); - * b = 3; y = b; - * read_barrier_depends(); - * x = a; - * </programlisting> - * - * does not enforce ordering, since there is no data dependency between - * the read of "a" and the read of "b". Therefore, on some CPUs, such - * as Alpha, "y" could be set to 3 and "x" to 0. Use rmb() - * in cases like this where there are no data dependencies. - */ - -#define read_barrier_depends() do { } while (0) - -#define __sync() __insn_mf() - -#if CHIP_HAS_SPLIT_CYCLE() -#define get_cycles_low() __insn_mfspr(SPR_CYCLE_LOW) -#else -#define get_cycles_low() __insn_mfspr(SPR_CYCLE) /* just get all 64 bits */ -#endif - -#if !CHIP_HAS_MF_WAITS_FOR_VICTIMS() -#include <hv/syscall_public.h> -/* - * Issue an uncacheable load to each memory controller, then - * wait until those loads have completed. - */ -static inline void __mb_incoherent(void) -{ - long clobber_r10; - asm volatile("swint2" - : "=R10" (clobber_r10) - : "R10" (HV_SYS_fence_incoherent) - : "r0", "r1", "r2", "r3", "r4", - "r5", "r6", "r7", "r8", "r9", - "r11", "r12", "r13", "r14", - "r15", "r16", "r17", "r18", "r19", - "r20", "r21", "r22", "r23", "r24", - "r25", "r26", "r27", "r28", "r29"); -} -#endif - -/* Fence to guarantee visibility of stores to incoherent memory. */ -static inline void -mb_incoherent(void) -{ - __insn_mf(); - -#if !CHIP_HAS_MF_WAITS_FOR_VICTIMS() - { -#if CHIP_HAS_TILE_WRITE_PENDING() - const unsigned long WRITE_TIMEOUT_CYCLES = 400; - unsigned long start = get_cycles_low(); - do { - if (__insn_mfspr(SPR_TILE_WRITE_PENDING) == 0) - return; - } while ((get_cycles_low() - start) < WRITE_TIMEOUT_CYCLES); -#endif /* CHIP_HAS_TILE_WRITE_PENDING() */ - (void) __mb_incoherent(); - } -#endif /* CHIP_HAS_MF_WAITS_FOR_VICTIMS() */ -} - -#define fast_wmb() __sync() -#define fast_rmb() __sync() -#define fast_mb() __sync() -#define fast_iob() mb_incoherent() - -#define wmb() fast_wmb() -#define rmb() fast_rmb() -#define mb() fast_mb() -#define iob() fast_iob() - -#ifdef CONFIG_SMP -#define smp_mb() mb() -#define smp_rmb() rmb() -#define smp_wmb() wmb() -#define smp_read_barrier_depends() read_barrier_depends() -#else -#define smp_mb() barrier() -#define smp_rmb() barrier() -#define smp_wmb() barrier() -#define smp_read_barrier_depends() do { } while (0) -#endif - -#define set_mb(var, value) \ - do { var = value; mb(); } while (0) - -/* - * Pause the DMA engine and static network before task switching. - */ -#define prepare_arch_switch(next) _prepare_arch_switch(next) -void _prepare_arch_switch(struct task_struct *next); - - -/* - * switch_to(n) should switch tasks to task nr n, first - * checking that n isn't the current task, in which case it does nothing. - * The number of callee-saved registers saved on the kernel stack - * is defined here for use in copy_thread() and must agree with __switch_to(). - */ -#endif /* !__ASSEMBLY__ */ -#define CALLEE_SAVED_FIRST_REG 30 -#define CALLEE_SAVED_REGS_COUNT 24 /* r30 to r52, plus an empty to align */ -#ifndef __ASSEMBLY__ -struct task_struct; -#define switch_to(prev, next, last) ((last) = _switch_to((prev), (next))) -extern struct task_struct *_switch_to(struct task_struct *prev, - struct task_struct *next); - -/* Helper function for _switch_to(). */ -extern struct task_struct *__switch_to(struct task_struct *prev, - struct task_struct *next, - unsigned long new_system_save_k_0); - -/* Address that switched-away from tasks are at. */ -extern unsigned long get_switch_to_pc(void); - -/* - * On SMP systems, when the scheduler does migration-cost autodetection, - * it needs a way to flush as much of the CPU's caches as possible: - * - * TODO: fill this in! - */ -static inline void sched_cacheflush(void) -{ -} - -#define arch_align_stack(x) (x) - -/* - * Is the kernel doing fixups of unaligned accesses? If <0, no kernel - * intervention occurs and SIGBUS is delivered with no data address - * info. If 0, the kernel single-steps the instruction to discover - * the data address to provide with the SIGBUS. If 1, the kernel does - * a fixup. - */ -extern int unaligned_fixup; - -/* Is the kernel printing on each unaligned fixup? */ -extern int unaligned_printk; - -/* Number of unaligned fixups performed */ -extern unsigned int unaligned_fixup_count; - -/* Init-time routine to do tile-specific per-cpu setup. */ -void setup_cpu(int boot); - -/* User-level DMA management functions */ -void grant_dma_mpls(void); -void restrict_dma_mpls(void); - -#ifdef CONFIG_HARDWALL -/* User-level network management functions */ -void reset_network_state(void); -void grant_network_mpls(void); -void restrict_network_mpls(void); -int hardwall_deactivate(struct task_struct *task); - -/* Hook hardwall code into changes in affinity. */ -#define arch_set_cpus_allowed(p, new_mask) do { \ - if (p->thread.hardwall && !cpumask_equal(&p->cpus_allowed, new_mask)) \ - hardwall_deactivate(p); \ -} while (0) -#endif - -/* - * Kernel threads can check to see if they need to migrate their - * stack whenever they return from a context switch; for user - * threads, we defer until they are returning to user-space. - */ -#define finish_arch_switch(prev) do { \ - if (unlikely((prev)->state == TASK_DEAD)) \ - __insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_OS_EXIT | \ - ((prev)->pid << _SIM_CONTROL_OPERATOR_BITS)); \ - __insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_OS_SWITCH | \ - (current->pid << _SIM_CONTROL_OPERATOR_BITS)); \ - if (current->mm == NULL && !kstack_hash && \ - current_thread_info()->homecache_cpu != smp_processor_id()) \ - homecache_migrate_kthread(); \ -} while (0) - -/* Support function for forking a new task. */ -void ret_from_fork(void); - -/* Called from ret_from_fork() when a new process starts up. */ -struct task_struct *sim_notify_fork(struct task_struct *prev); - -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_TILE_SYSTEM_H */ +/* FILE TO BE DELETED. DO NOT ADD STUFF HERE! */ +#include <asm/barrier.h> +#include <asm/exec.h> +#include <asm/switch_to.h> |