1 files changed, 448 insertions, 52 deletions

diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c
index ab115cd..1b43086 100644
--- a/arch/x86/kernel/ftrace.c
+++ b/arch/x86/kernel/ftrace.c
@@ -11,17 +11,20 @@
 
 #include <linux/spinlock.h>
 #include <linux/hardirq.h>
+#include <linux/uaccess.h>
 #include <linux/ftrace.h>
 #include <linux/percpu.h>
+#include <linux/sched.h>
 #include <linux/init.h>
 #include <linux/list.h>
 
-#include <asm/alternative.h>
 #include <asm/ftrace.h>
+#include <linux/ftrace.h>
+#include <asm/nops.h>
+#include <asm/nmi.h>
 
 
-/* Long is fine, even if it is only 4 bytes ;-) */
-static long *ftrace_nop;
+#ifdef CONFIG_DYNAMIC_FTRACE
 
 union ftrace_code_union {
 	char code[MCOUNT_INSN_SIZE];
@@ -31,18 +34,12 @@ union ftrace_code_union {
 	} __attribute__((packed));
 };
 
-
-static int notrace ftrace_calc_offset(long ip, long addr)
+static int ftrace_calc_offset(long ip, long addr)
 {
 	return (int)(addr - ip);
 }
 
-notrace unsigned char *ftrace_nop_replace(void)
-{
-	return (char *)ftrace_nop;
-}
-
-notrace unsigned char *ftrace_call_replace(unsigned long ip, unsigned long addr)
+static unsigned char *ftrace_call_replace(unsigned long ip, unsigned long addr)
 {
 	static union ftrace_code_union calc;
 
@@ -56,48 +53,198 @@ notrace unsigned char *ftrace_call_replace(unsigned long ip, unsigned long addr)
 	return calc.code;
 }
 
-notrace int
+/*
+ * Modifying code must take extra care. On an SMP machine, if
+ * the code being modified is also being executed on another CPU
+ * that CPU will have undefined results and possibly take a GPF.
+ * We use kstop_machine to stop other CPUS from exectuing code.
+ * But this does not stop NMIs from happening. We still need
+ * to protect against that. We separate out the modification of
+ * the code to take care of this.
+ *
+ * Two buffers are added: An IP buffer and a "code" buffer.
+ *
+ * 1) Put the instruction pointer into the IP buffer
+ *    and the new code into the "code" buffer.
+ * 2) Set a flag that says we are modifying code
+ * 3) Wait for any running NMIs to finish.
+ * 4) Write the code
+ * 5) clear the flag.
+ * 6) Wait for any running NMIs to finish.
+ *
+ * If an NMI is executed, the first thing it does is to call
+ * "ftrace_nmi_enter". This will check if the flag is set to write
+ * and if it is, it will write what is in the IP and "code" buffers.
+ *
+ * The trick is, it does not matter if everyone is writing the same
+ * content to the code location. Also, if a CPU is executing code
+ * it is OK to write to that code location if the contents being written
+ * are the same as what exists.
+ */
+
+static atomic_t in_nmi = ATOMIC_INIT(0);
+static int mod_code_status;		/* holds return value of text write */
+static int mod_code_write;		/* set when NMI should do the write */
+static void *mod_code_ip;		/* holds the IP to write to */
+static void *mod_code_newcode;		/* holds the text to write to the IP */
+
+static unsigned nmi_wait_count;
+static atomic_t nmi_update_count = ATOMIC_INIT(0);
+
+int ftrace_arch_read_dyn_info(char *buf, int size)
+{
+	int r;
+
+	r = snprintf(buf, size, "%u %u",
+		     nmi_wait_count,
+		     atomic_read(&nmi_update_count));
+	return r;
+}
+
+static void ftrace_mod_code(void)
+{
+	/*
+	 * Yes, more than one CPU process can be writing to mod_code_status.
+	 *    (and the code itself)
+	 * But if one were to fail, then they all should, and if one were
+	 * to succeed, then they all should.
+	 */
+	mod_code_status = probe_kernel_write(mod_code_ip, mod_code_newcode,
+					     MCOUNT_INSN_SIZE);
+}
+
+void ftrace_nmi_enter(void)
+{
+	atomic_inc(&in_nmi);
+	/* Must have in_nmi seen before reading write flag */
+	smp_mb();
+	if (mod_code_write) {
+		ftrace_mod_code();
+		atomic_inc(&nmi_update_count);
+	}
+}
+
+void ftrace_nmi_exit(void)
+{
+	/* Finish all executions before clearing in_nmi */
+	smp_wmb();
+	atomic_dec(&in_nmi);
+}
+
+static void wait_for_nmi(void)
+{
+	int waited = 0;
+
+	while (atomic_read(&in_nmi)) {
+		waited = 1;
+		cpu_relax();
+	}
+
+	if (waited)
+		nmi_wait_count++;
+}
+
+static int
+do_ftrace_mod_code(unsigned long ip, void *new_code)
+{
+	mod_code_ip = (void *)ip;
+	mod_code_newcode = new_code;
+
+	/* The buffers need to be visible before we let NMIs write them */
+	smp_wmb();
+
+	mod_code_write = 1;
+
+	/* Make sure write bit is visible before we wait on NMIs */
+	smp_mb();
+
+	wait_for_nmi();
+
+	/* Make sure all running NMIs have finished before we write the code */
+	smp_mb();
+
+	ftrace_mod_code();
+
+	/* Make sure the write happens before clearing the bit */
+	smp_wmb();
+
+	mod_code_write = 0;
+
+	/* make sure NMIs see the cleared bit */
+	smp_mb();
+
+	wait_for_nmi();
+
+	return mod_code_status;
+}
+
+
+
+
+static unsigned char ftrace_nop[MCOUNT_INSN_SIZE];
+
+static unsigned char *ftrace_nop_replace(void)
+{
+	return ftrace_nop;
+}
+
+static int
 ftrace_modify_code(unsigned long ip, unsigned char *old_code,
 		   unsigned char *new_code)
 {
-	unsigned replaced;
-	unsigned old = *(unsigned *)old_code; /* 4 bytes */
-	unsigned new = *(unsigned *)new_code; /* 4 bytes */
-	unsigned char newch = new_code[4];
-	int faulted = 0;
+	unsigned char replaced[MCOUNT_INSN_SIZE];
 
 	/*
 	 * Note: Due to modules and __init, code can
 	 *  disappear and change, we need to protect against faulting
-	 *  as well as code changing.
+	 *  as well as code changing. We do this by using the
+	 *  probe_kernel_* functions.
 	 *
 	 * No real locking needed, this code is run through
-	 * kstop_machine.
+	 * kstop_machine, or before SMP starts.
 	 */
-	asm volatile (
-		"1: lock\n"
-		"   cmpxchg %3, (%2)\n"
-		"   jnz 2f\n"
-		"   movb %b4, 4(%2)\n"
-		"2:\n"
-		".section .fixup, \"ax\"\n"
-		"3:	movl $1, %0\n"
-		"	jmp 2b\n"
-		".previous\n"
-		_ASM_EXTABLE(1b, 3b)
-		: "=r"(faulted), "=a"(replaced)
-		: "r"(ip), "r"(new), "c"(newch),
-		  "0"(faulted), "a"(old)
-		: "memory");
+
+	/* read the text we want to modify */
+	if (probe_kernel_read(replaced, (void *)ip, MCOUNT_INSN_SIZE))
+		return -EFAULT;
+
+	/* Make sure it is what we expect it to be */
+	if (memcmp(replaced, old_code, MCOUNT_INSN_SIZE) != 0)
+		return -EINVAL;
+
+	/* replace the text with the new text */
+	if (do_ftrace_mod_code(ip, new_code))
+		return -EPERM;
+
 	sync_core();
 
-	if (replaced != old && replaced != new)
-		faulted = 2;
+	return 0;
+}
+
+int ftrace_make_nop(struct module *mod,
+		    struct dyn_ftrace *rec, unsigned long addr)
+{
+	unsigned char *new, *old;
+	unsigned long ip = rec->ip;
 
-	return faulted;
+	old = ftrace_call_replace(ip, addr);
+	new = ftrace_nop_replace();
+
+	return ftrace_modify_code(rec->ip, old, new);
 }
 
-notrace int ftrace_update_ftrace_func(ftrace_func_t func)
+int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
+{
+	unsigned char *new, *old;
+	unsigned long ip = rec->ip;
+
+	old = ftrace_nop_replace();
+	new = ftrace_call_replace(ip, addr);
+
+	return ftrace_modify_code(rec->ip, old, new);
+}
+
+int ftrace_update_ftrace_func(ftrace_func_t func)
 {
 	unsigned long ip = (unsigned long)(&ftrace_call);
 	unsigned char old[MCOUNT_INSN_SIZE], *new;
@@ -110,32 +257,281 @@ notrace int ftrace_update_ftrace_func(ftrace_func_t func)
 	return ret;
 }
 
-notrace int ftrace_mcount_set(unsigned long *data)
+int __init ftrace_dyn_arch_init(void *data)
 {
-	unsigned long ip = (long)(&mcount_call);
-	unsigned long *addr = data;
-	unsigned char old[MCOUNT_INSN_SIZE], *new;
+	extern const unsigned char ftrace_test_p6nop[];
+	extern const unsigned char ftrace_test_nop5[];
+	extern const unsigned char ftrace_test_jmp[];
+	int faulted = 0;
 
 	/*
-	 * Replace the mcount stub with a pointer to the
-	 * ip recorder function.
+	 * There is no good nop for all x86 archs.
+	 * We will default to using the P6_NOP5, but first we
+	 * will test to make sure that the nop will actually
+	 * work on this CPU. If it faults, we will then
+	 * go to a lesser efficient 5 byte nop. If that fails
+	 * we then just use a jmp as our nop. This isn't the most
+	 * efficient nop, but we can not use a multi part nop
+	 * since we would then risk being preempted in the middle
+	 * of that nop, and if we enabled tracing then, it might
+	 * cause a system crash.
+	 *
+	 * TODO: check the cpuid to determine the best nop.
 	 */
-	memcpy(old, &mcount_call, MCOUNT_INSN_SIZE);
-	new = ftrace_call_replace(ip, *addr);
-	*addr = ftrace_modify_code(ip, old, new);
+	asm volatile (
+		"ftrace_test_jmp:"
+		"jmp ftrace_test_p6nop\n"
+		"nop\n"
+		"nop\n"
+		"nop\n"  /* 2 byte jmp + 3 bytes */
+		"ftrace_test_p6nop:"
+		P6_NOP5
+		"jmp 1f\n"
+		"ftrace_test_nop5:"
+		".byte 0x66,0x66,0x66,0x66,0x90\n"
+		"1:"
+		".section .fixup, \"ax\"\n"
+		"2:	movl $1, %0\n"
+		"	jmp ftrace_test_nop5\n"
+		"3:	movl $2, %0\n"
+		"	jmp 1b\n"
+		".previous\n"
+		_ASM_EXTABLE(ftrace_test_p6nop, 2b)
+		_ASM_EXTABLE(ftrace_test_nop5, 3b)
+		: "=r"(faulted) : "0" (faulted));
+
+	switch (faulted) {
+	case 0:
+		pr_info("ftrace: converting mcount calls to 0f 1f 44 00 00\n");
+		memcpy(ftrace_nop, ftrace_test_p6nop, MCOUNT_INSN_SIZE);
+		break;
+	case 1:
+		pr_info("ftrace: converting mcount calls to 66 66 66 66 90\n");
+		memcpy(ftrace_nop, ftrace_test_nop5, MCOUNT_INSN_SIZE);
+		break;
+	case 2:
+		pr_info("ftrace: converting mcount calls to jmp . + 5\n");
+		memcpy(ftrace_nop, ftrace_test_jmp, MCOUNT_INSN_SIZE);
+		break;
+	}
+
+	/* The return code is retured via data */
+	*(unsigned long *)data = 0;
 
 	return 0;
 }
+#endif
 
-int __init ftrace_dyn_arch_init(void *data)
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+extern void ftrace_graph_call(void);
+
+static int ftrace_mod_jmp(unsigned long ip,
+			  int old_offset, int new_offset)
+{
+	unsigned char code[MCOUNT_INSN_SIZE];
+
+	if (probe_kernel_read(code, (void *)ip, MCOUNT_INSN_SIZE))
+		return -EFAULT;
+
+	if (code[0] != 0xe9 || old_offset != *(int *)(&code[1]))
+		return -EINVAL;
+
+	*(int *)(&code[1]) = new_offset;
+
+	if (do_ftrace_mod_code(ip, &code))
+		return -EPERM;
+
+	return 0;
+}
+
+int ftrace_enable_ftrace_graph_caller(void)
+{
+	unsigned long ip = (unsigned long)(&ftrace_graph_call);
+	int old_offset, new_offset;
+
+	old_offset = (unsigned long)(&ftrace_stub) - (ip + MCOUNT_INSN_SIZE);
+	new_offset = (unsigned long)(&ftrace_graph_caller) - (ip + MCOUNT_INSN_SIZE);
+
+	return ftrace_mod_jmp(ip, old_offset, new_offset);
+}
+
+int ftrace_disable_ftrace_graph_caller(void)
+{
+	unsigned long ip = (unsigned long)(&ftrace_graph_call);
+	int old_offset, new_offset;
+
+	old_offset = (unsigned long)(&ftrace_graph_caller) - (ip + MCOUNT_INSN_SIZE);
+	new_offset = (unsigned long)(&ftrace_stub) - (ip + MCOUNT_INSN_SIZE);
+
+	return ftrace_mod_jmp(ip, old_offset, new_offset);
+}
+
+#else /* CONFIG_DYNAMIC_FTRACE */
+
+/*
+ * These functions are picked from those used on
+ * this page for dynamic ftrace. They have been
+ * simplified to ignore all traces in NMI context.
+ */
+static atomic_t in_nmi;
+
+void ftrace_nmi_enter(void)
+{
+	atomic_inc(&in_nmi);
+}
+
+void ftrace_nmi_exit(void)
+{
+	atomic_dec(&in_nmi);
+}
+
+#endif /* !CONFIG_DYNAMIC_FTRACE */
+
+/* Add a function return address to the trace stack on thread info.*/
+static int push_return_trace(unsigned long ret, unsigned long long time,
+				unsigned long func, int *depth)
 {
-	const unsigned char *const *noptable = find_nop_table();
+	int index;
 
-	/* This is running in kstop_machine */
+	if (!current->ret_stack)
+		return -EBUSY;
 
-	ftrace_mcount_set(data);
+	/* The return trace stack is full */
+	if (current->curr_ret_stack == FTRACE_RETFUNC_DEPTH - 1) {
+		atomic_inc(&current->trace_overrun);
+		return -EBUSY;
+	}
 
-	ftrace_nop = (unsigned long *)noptable[MCOUNT_INSN_SIZE];
+	index = ++current->curr_ret_stack;
+	barrier();
+	current->ret_stack[index].ret = ret;
+	current->ret_stack[index].func = func;
+	current->ret_stack[index].calltime = time;
+	*depth = index;
 
 	return 0;
 }
+
+/* Retrieve a function return address to the trace stack on thread info.*/
+static void pop_return_trace(struct ftrace_graph_ret *trace, unsigned long *ret)
+{
+	int index;
+
+	index = current->curr_ret_stack;
+
+	if (unlikely(index < 0)) {
+		ftrace_graph_stop();
+		WARN_ON(1);
+		/* Might as well panic, otherwise we have no where to go */
+		*ret = (unsigned long)panic;
+		return;
+	}
+
+	*ret = current->ret_stack[index].ret;
+	trace->func = current->ret_stack[index].func;
+	trace->calltime = current->ret_stack[index].calltime;
+	trace->overrun = atomic_read(&current->trace_overrun);
+	trace->depth = index;
+	barrier();
+	current->curr_ret_stack--;
+
+}
+
+/*
+ * Send the trace to the ring-buffer.
+ * @return the original return address.
+ */
+unsigned long ftrace_return_to_handler(void)
+{
+	struct ftrace_graph_ret trace;
+	unsigned long ret;
+
+	pop_return_trace(&trace, &ret);
+	trace.rettime = cpu_clock(raw_smp_processor_id());
+	ftrace_graph_return(&trace);
+
+	if (unlikely(!ret)) {
+		ftrace_graph_stop();
+		WARN_ON(1);
+		/* Might as well panic. What else to do? */
+		ret = (unsigned long)panic;
+	}
+
+	return ret;
+}
+
+/*
+ * Hook the return address and push it in the stack of return addrs
+ * in current thread info.
+ */
+void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
+{
+	unsigned long old;
+	unsigned long long calltime;
+	int faulted;
+	struct ftrace_graph_ent trace;
+	unsigned long return_hooker = (unsigned long)
+				&return_to_handler;
+
+	/* Nmi's are currently unsupported */
+	if (unlikely(atomic_read(&in_nmi)))
+		return;
+
+	if (unlikely(atomic_read(&current->tracing_graph_pause)))
+		return;
+
+	/*
+	 * Protect against fault, even if it shouldn't
+	 * happen. This tool is too much intrusive to
+	 * ignore such a protection.
+	 */
+	asm volatile(
+		"1: " _ASM_MOV " (%[parent_old]), %[old]\n"
+		"2: " _ASM_MOV " %[return_hooker], (%[parent_replaced])\n"
+		"   movl $0, %[faulted]\n"
+
+		".section .fixup, \"ax\"\n"
+		"3: movl $1, %[faulted]\n"
+		".previous\n"
+
+		_ASM_EXTABLE(1b, 3b)
+		_ASM_EXTABLE(2b, 3b)
+
+		: [parent_replaced] "=r" (parent), [old] "=r" (old),
+		  [faulted] "=r" (faulted)
+		: [parent_old] "0" (parent), [return_hooker] "r" (return_hooker)
+		: "memory"
+	);
+
+	if (unlikely(faulted)) {
+		ftrace_graph_stop();
+		WARN_ON(1);
+		return;
+	}
+
+	if (unlikely(!__kernel_text_address(old))) {
+		ftrace_graph_stop();
+		*parent = old;
+		WARN_ON(1);
+		return;
+	}
+
+	calltime = cpu_clock(raw_smp_processor_id());
+
+	if (push_return_trace(old, calltime,
+				self_addr, &trace.depth) == -EBUSY) {
+		*parent = old;
+		return;
+	}
+
+	trace.func = self_addr;
+
+	/* Only trace if the calling function expects to */
+	if (!ftrace_graph_entry(&trace)) {
+		current->curr_ret_stack--;
+		*parent = old;
+	}
+}
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */