diff options
Diffstat (limited to 'arch')
-rw-r--r-- | arch/arm/mach-ux500/board-mop500-pins.c | 427 |
1 files changed, 362 insertions, 65 deletions
diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c index a267c6d..5770ed0 100644 --- a/arch/arm/mach-ux500/board-mop500-pins.c +++ b/arch/arm/mach-ux500/board-mop500-pins.c @@ -34,8 +34,6 @@ BIAS(in_nopull, PIN_INPUT_NOPULL); BIAS(in_nopull_slpm_nowkup, PIN_INPUT_NOPULL|PIN_SLPM_WAKEUP_DISABLE); BIAS(in_pu, PIN_INPUT_PULLUP); BIAS(in_pd, PIN_INPUT_PULLDOWN); -BIAS(in_pd_slpm_in_pu, PIN_INPUT_PULLDOWN|PIN_SLPM_INPUT_PULLUP); -BIAS(in_pu_slpm_out_lo, PIN_INPUT_PULLUP|PIN_SLPM_OUTPUT_LOW); BIAS(out_hi, PIN_OUTPUT_HIGH); BIAS(out_lo, PIN_OUTPUT_LOW); BIAS(out_lo_slpm_nowkup, PIN_OUTPUT_LOW|PIN_SLPM_WAKEUP_DISABLE); @@ -47,14 +45,36 @@ BIAS(gpio_in_pd_slpm_gpio_nopull, PIN_INPUT_PULLDOWN|PIN_GPIOMODE_ENABLED|PIN_SL BIAS(gpio_out_hi, PIN_OUTPUT_HIGH|PIN_GPIOMODE_ENABLED); BIAS(gpio_out_lo, PIN_OUTPUT_LOW|PIN_GPIOMODE_ENABLED); /* Sleep modes */ -BIAS(slpm_in_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); -BIAS(slpm_in_nopull_wkup, PIN_SLEEPMODE_ENABLED|PIN_SLPM_DIR_INPUT|PIN_SLPM_PULL_NONE|PIN_SLPM_WAKEUP_ENABLE); -BIAS(slpm_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); -BIAS(slpm_out_hi_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_OUTPUT_HIGH|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); -BIAS(slpm_out_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); -BIAS(slpm_out_lo_wkup, PIN_SLEEPMODE_ENABLED|PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_ENABLE); -BIAS(slpm_out_lo_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); -BIAS(slpm_in_nopull_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_INPUT_NOPULL|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); +BIAS(slpm_in_nopull_wkup, PIN_SLEEPMODE_ENABLED| + PIN_SLPM_DIR_INPUT|PIN_SLPM_PULL_NONE|PIN_SLPM_WAKEUP_ENABLE); +BIAS(slpm_in_wkup_pdis, PIN_SLEEPMODE_ENABLED| + PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); +BIAS(slpm_wkup_pdis, PIN_SLEEPMODE_ENABLED| + PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); +BIAS(slpm_out_lo_pdis, PIN_SLEEPMODE_ENABLED| + PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_DISABLE|PIN_SLPM_PDIS_DISABLED); +BIAS(slpm_out_lo_wkup, PIN_SLEEPMODE_ENABLED| + PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_ENABLE); +BIAS(slpm_out_lo_wkup_pdis, PIN_SLEEPMODE_ENABLED| + PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); +BIAS(slpm_out_hi_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_OUTPUT_HIGH| + PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); +BIAS(slpm_in_nopull_wkup_pdis, PIN_SLEEPMODE_ENABLED| + PIN_SLPM_INPUT_NOPULL|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); +BIAS(slpm_in_pu_wkup_pdis_en, PIN_SLEEPMODE_ENABLED|PIN_SLPM_INPUT_PULLUP| + PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_ENABLED); +BIAS(slpm_out_wkup_pdis, PIN_SLEEPMODE_ENABLED| + PIN_SLPM_DIR_OUTPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); +BIAS(out_lo_wkup_pdis, PIN_SLPM_OUTPUT_LOW| + PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); +BIAS(in_wkup_pdis_en, PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE| + PIN_SLPM_PDIS_ENABLED); +BIAS(in_wkup_pdis, PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE| + PIN_SLPM_PDIS_DISABLED); +BIAS(out_hi_wkup_pdis, PIN_SLPM_OUTPUT_HIGH|PIN_SLPM_WAKEUP_ENABLE| + PIN_SLPM_PDIS_DISABLED); +BIAS(out_wkup_pdis, PIN_SLPM_DIR_OUTPUT|PIN_SLPM_WAKEUP_ENABLE| + PIN_SLPM_PDIS_DISABLED); /* We use these to define hog settings that are always done on boot */ #define DB8500_MUX_HOG(group,func) \ @@ -70,13 +90,16 @@ BIAS(slpm_in_nopull_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_INPUT_NOPULL|PIN_S PIN_MAP_MUX_GROUP_DEFAULT(dev, "pinctrl-db8500", group, func) #define DB8500_PIN(pin,conf,dev) \ PIN_MAP_CONFIGS_PIN_DEFAULT(dev, "pinctrl-db8500", pin, conf) -#define DB8500_PIN_SLEEP(pin, conf, dev) \ - PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_SLEEP, "pinctrl-db8500", \ +#define DB8500_PIN_IDLE(pin, conf, dev) \ + PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_IDLE, "pinctrl-db8500", \ pin, conf) - -#define DB8500_PIN_SLEEP(pin,conf,dev) \ +#define DB8500_PIN_SLEEP(pin, conf, dev) \ PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_SLEEP, "pinctrl-db8500", \ pin, conf) +#define DB8500_MUX_STATE(group, func, dev, state) \ + PIN_MAP_MUX_GROUP(dev, state, "pinctrl-db8500", group, func) +#define DB8500_PIN_STATE(pin, conf, dev, state) \ + PIN_MAP_CONFIGS_PIN(dev, state, "pinctrl-db8500", pin, conf) /* Pin control settings */ static struct pinctrl_map __initdata mop500_family_pinmap[] = { @@ -113,7 +136,7 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = { * UART0, we do not mux in u0 here. * uart-0 pins gpio configuration should be kept intact to prevent * a glitch in tx line when the tty dev is opened. Later these pins - * are configured to uart mop500_pins_uart0 + * are configured by uart driver */ DB8500_PIN_HOG("GPIO0_AJ5", in_pu), /* CTS */ DB8500_PIN_HOG("GPIO1_AJ3", out_hi), /* RTS */ @@ -124,12 +147,13 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = { * TODO: is this used on U8500 variants and Snowball really? * The setting on GPIO31 conflicts with magnetometer use on hrefv60 */ - DB8500_MUX_HOG("u2rxtx_c_1", "u2"), - DB8500_MUX_HOG("u2ctsrts_c_1", "u2"), - DB8500_PIN_HOG("GPIO29_W2", in_pu), /* RXD */ - DB8500_PIN_HOG("GPIO30_W3", out_hi), /* TXD */ - DB8500_PIN_HOG("GPIO31_V3", in_pu), /* CTS */ - DB8500_PIN_HOG("GPIO32_V2", out_hi), /* RTS */ + /* default state for UART2 */ + DB8500_MUX("u2rxtx_c_1", "u2", "uart2"), + DB8500_PIN("GPIO29_W2", in_pu, "uart2"), /* RXD */ + DB8500_PIN("GPIO30_W3", out_hi, "uart2"), /* TXD */ + /* Sleep state for UART2 */ + DB8500_PIN_SLEEP("GPIO29_W2", in_wkup_pdis, "uart2"), + DB8500_PIN_SLEEP("GPIO30_W3", out_wkup_pdis, "uart2"), /* * The following pin sets were known as "runtime pins" before being * converted to the pinctrl model. Here we model them as "default" @@ -141,11 +165,18 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = { DB8500_PIN("GPIO1_AJ3", out_hi, "uart0"), /* RTS */ DB8500_PIN("GPIO2_AH4", in_pu, "uart0"), /* RXD */ DB8500_PIN("GPIO3_AH3", out_hi, "uart0"), /* TXD */ - /* UART0 sleep state */ + /* Sleep state for UART0 */ DB8500_PIN_SLEEP("GPIO0_AJ5", slpm_in_wkup_pdis, "uart0"), DB8500_PIN_SLEEP("GPIO1_AJ3", slpm_out_hi_wkup_pdis, "uart0"), DB8500_PIN_SLEEP("GPIO2_AH4", slpm_in_wkup_pdis, "uart0"), DB8500_PIN_SLEEP("GPIO3_AH3", slpm_out_wkup_pdis, "uart0"), + /* Mux in UART1 after initialization */ + DB8500_MUX("u1rxtx_a_1", "u1", "uart1"), + DB8500_PIN("GPIO4_AH6", in_pu, "uart1"), /* RXD */ + DB8500_PIN("GPIO5_AG6", out_hi, "uart1"), /* TXD */ + /* Sleep state for UART1 */ + DB8500_PIN_SLEEP("GPIO4_AH6", slpm_in_wkup_pdis, "uart1"), + DB8500_PIN_SLEEP("GPIO5_AG6", slpm_out_wkup_pdis, "uart1"), /* MSP1 for ALSA codec */ DB8500_MUX("msp1txrx_a_1", "msp1", "ux500-msp-i2s.1"), DB8500_MUX("msp1_a_1", "msp1", "ux500-msp-i2s.1"), @@ -162,7 +193,10 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = { DB8500_MUX("lcd_d8_d11_a_1", "lcd", "mcde-tvout"), DB8500_MUX("lcdaclk_b_1", "lcda", "mcde-tvout"), /* Mux in LCD VSI1 and pull it up for MCDE HDMI output */ - DB8500_MUX("lcdvsi1_a_1", "lcd", "av8100-hdmi"), + DB8500_MUX("lcdvsi1_a_1", "lcd", "0-0070"), + DB8500_PIN("GPIO69_E2", in_pu, "0-0070"), + /* LCD VSI1 sleep state */ + DB8500_PIN_SLEEP("GPIO69_E2", slpm_in_wkup_pdis, "0-0070"), /* Mux in i2c0 block, default state */ DB8500_MUX("i2c0_a_1", "i2c0", "nmk-i2c.0"), /* i2c0 sleep state */ @@ -195,6 +229,18 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = { DB8500_PIN("GPIO26_Y2", in_pu, "sdi0"), /* DAT1 */ DB8500_PIN("GPIO27_AA2", in_pu, "sdi0"), /* DAT2 */ DB8500_PIN("GPIO28_AA1", in_pu, "sdi0"), /* DAT3 */ + /* SDI0 sleep state */ + DB8500_PIN_SLEEP("GPIO18_AC2", slpm_out_hi_wkup_pdis, "sdi0"), + DB8500_PIN_SLEEP("GPIO19_AC1", slpm_out_hi_wkup_pdis, "sdi0"), + DB8500_PIN_SLEEP("GPIO20_AB4", slpm_out_hi_wkup_pdis, "sdi0"), + DB8500_PIN_SLEEP("GPIO22_AA3", slpm_in_wkup_pdis, "sdi0"), + DB8500_PIN_SLEEP("GPIO23_AA4", slpm_out_lo_wkup_pdis, "sdi0"), + DB8500_PIN_SLEEP("GPIO24_AB2", slpm_in_wkup_pdis, "sdi0"), + DB8500_PIN_SLEEP("GPIO25_Y4", slpm_in_wkup_pdis, "sdi0"), + DB8500_PIN_SLEEP("GPIO26_Y2", slpm_in_wkup_pdis, "sdi0"), + DB8500_PIN_SLEEP("GPIO27_AA2", slpm_in_wkup_pdis, "sdi0"), + DB8500_PIN_SLEEP("GPIO28_AA1", slpm_in_wkup_pdis, "sdi0"), + /* Mux in SDI1 (here called MC1) used for SDIO for CW1200 WLAN */ DB8500_MUX("mc1_a_1", "mc1", "sdi1"), DB8500_PIN("GPIO208_AH16", out_lo, "sdi1"), /* CLK */ @@ -204,6 +250,15 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = { DB8500_PIN("GPIO212_AF13", in_pu, "sdi1"), /* DAT1 */ DB8500_PIN("GPIO213_AG13", in_pu, "sdi1"), /* DAT2 */ DB8500_PIN("GPIO214_AH15", in_pu, "sdi1"), /* DAT3 */ + /* SDI1 sleep state */ + DB8500_PIN_SLEEP("GPIO208_AH16", slpm_out_lo_wkup_pdis, "sdi1"), /* CLK */ + DB8500_PIN_SLEEP("GPIO209_AG15", slpm_in_wkup_pdis, "sdi1"), /* FBCLK */ + DB8500_PIN_SLEEP("GPIO210_AJ15", slpm_in_wkup_pdis, "sdi1"), /* CMD */ + DB8500_PIN_SLEEP("GPIO211_AG14", slpm_in_wkup_pdis, "sdi1"), /* DAT0 */ + DB8500_PIN_SLEEP("GPIO212_AF13", slpm_in_wkup_pdis, "sdi1"), /* DAT1 */ + DB8500_PIN_SLEEP("GPIO213_AG13", slpm_in_wkup_pdis, "sdi1"), /* DAT2 */ + DB8500_PIN_SLEEP("GPIO214_AH15", slpm_in_wkup_pdis, "sdi1"), /* DAT3 */ + /* Mux in SDI2 (here called MC2) used for for PoP eMMC */ DB8500_MUX("mc2_a_1", "mc2", "sdi2"), DB8500_PIN("GPIO128_A5", out_lo, "sdi2"), /* CLK */ @@ -217,6 +272,19 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = { DB8500_PIN("GPIO136_C7", in_pu, "sdi2"), /* DAT5 */ DB8500_PIN("GPIO137_A7", in_pu, "sdi2"), /* DAT6 */ DB8500_PIN("GPIO138_C5", in_pu, "sdi2"), /* DAT7 */ + /* SDI2 sleep state */ + DB8500_PIN_SLEEP("GPIO128_A5", out_lo_wkup_pdis, "sdi2"), /* CLK */ + DB8500_PIN_SLEEP("GPIO129_B4", in_wkup_pdis_en, "sdi2"), /* CMD */ + DB8500_PIN_SLEEP("GPIO130_C8", in_wkup_pdis_en, "sdi2"), /* FBCLK */ + DB8500_PIN_SLEEP("GPIO131_A12", in_wkup_pdis, "sdi2"), /* DAT0 */ + DB8500_PIN_SLEEP("GPIO132_C10", in_wkup_pdis, "sdi2"), /* DAT1 */ + DB8500_PIN_SLEEP("GPIO133_B10", in_wkup_pdis, "sdi2"), /* DAT2 */ + DB8500_PIN_SLEEP("GPIO134_B9", in_wkup_pdis, "sdi2"), /* DAT3 */ + DB8500_PIN_SLEEP("GPIO135_A9", in_wkup_pdis, "sdi2"), /* DAT4 */ + DB8500_PIN_SLEEP("GPIO136_C7", in_wkup_pdis, "sdi2"), /* DAT5 */ + DB8500_PIN_SLEEP("GPIO137_A7", in_wkup_pdis, "sdi2"), /* DAT6 */ + DB8500_PIN_SLEEP("GPIO138_C5", in_wkup_pdis, "sdi2"), /* DAT7 */ + /* Mux in SDI4 (here called MC4) used for for PCB-mounted eMMC */ DB8500_MUX("mc4_a_1", "mc4", "sdi4"), DB8500_PIN("GPIO197_AH24", in_pu, "sdi4"), /* DAT3 */ @@ -230,6 +298,19 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = { DB8500_PIN("GPIO205_AG23", in_pu, "sdi4"), /* DAT6 */ DB8500_PIN("GPIO206_AG24", in_pu, "sdi4"), /* DAT5 */ DB8500_PIN("GPIO207_AJ23", in_pu, "sdi4"), /* DAT4 */ + /*SDI4 sleep state */ + DB8500_PIN_SLEEP("GPIO197_AH24", slpm_in_wkup_pdis, "sdi4"), /* DAT3 */ + DB8500_PIN_SLEEP("GPIO198_AG25", slpm_in_wkup_pdis, "sdi4"), /* DAT2 */ + DB8500_PIN_SLEEP("GPIO199_AH23", slpm_in_wkup_pdis, "sdi4"), /* DAT1 */ + DB8500_PIN_SLEEP("GPIO200_AH26", slpm_in_wkup_pdis, "sdi4"), /* DAT0 */ + DB8500_PIN_SLEEP("GPIO201_AF24", slpm_in_wkup_pdis, "sdi4"), /* CMD */ + DB8500_PIN_SLEEP("GPIO202_AF25", slpm_in_wkup_pdis, "sdi4"), /* FBCLK */ + DB8500_PIN_SLEEP("GPIO203_AE23", slpm_out_lo_wkup_pdis, "sdi4"), /* CLK */ + DB8500_PIN_SLEEP("GPIO204_AF23", slpm_in_wkup_pdis, "sdi4"), /* DAT7 */ + DB8500_PIN_SLEEP("GPIO205_AG23", slpm_in_wkup_pdis, "sdi4"), /* DAT6 */ + DB8500_PIN_SLEEP("GPIO206_AG24", slpm_in_wkup_pdis, "sdi4"), /* DAT5 */ + DB8500_PIN_SLEEP("GPIO207_AJ23", slpm_in_wkup_pdis, "sdi4"), /* DAT4 */ + /* Mux in USB pins, drive STP high */ DB8500_MUX("usb_a_1", "usb", "musb-ux500.0"), DB8500_PIN("GPIO257_AE29", out_hi, "musb-ux500.0"), /* STP */ @@ -239,10 +320,232 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = { DB8500_PIN("GPIO218_AH11", in_pd, "spi2"), /* RXD */ DB8500_PIN("GPIO215_AH13", out_lo, "spi2"), /* TXD */ DB8500_PIN("GPIO217_AH12", out_lo, "spi2"), /* CLK */ + /* SPI2 idle state */ + DB8500_PIN_SLEEP("GPIO218_AH11", slpm_in_wkup_pdis, "spi2"), /* RXD */ + DB8500_PIN_SLEEP("GPIO215_AH13", slpm_out_lo_wkup_pdis, "spi2"), /* TXD */ + DB8500_PIN_SLEEP("GPIO217_AH12", slpm_wkup_pdis, "spi2"), /* CLK */ /* SPI2 sleep state */ + DB8500_PIN_SLEEP("GPIO216_AG12", slpm_in_wkup_pdis, "spi2"), /* FRM */ DB8500_PIN_SLEEP("GPIO218_AH11", slpm_in_wkup_pdis, "spi2"), /* RXD */ DB8500_PIN_SLEEP("GPIO215_AH13", slpm_out_lo_wkup_pdis, "spi2"), /* TXD */ DB8500_PIN_SLEEP("GPIO217_AH12", slpm_wkup_pdis, "spi2"), /* CLK */ + + /* ske default state */ + DB8500_MUX("kp_a_2", "kp", "nmk-ske-keypad"), + DB8500_PIN("GPIO153_B17", in_pd, "nmk-ske-keypad"), /* I7 */ + DB8500_PIN("GPIO154_C16", in_pd, "nmk-ske-keypad"), /* I6 */ + DB8500_PIN("GPIO155_C19", in_pd, "nmk-ske-keypad"), /* I5 */ + DB8500_PIN("GPIO156_C17", in_pd, "nmk-ske-keypad"), /* I4 */ + DB8500_PIN("GPIO161_D21", in_pd, "nmk-ske-keypad"), /* I3 */ + DB8500_PIN("GPIO162_D20", in_pd, "nmk-ske-keypad"), /* I2 */ + DB8500_PIN("GPIO163_C20", in_pd, "nmk-ske-keypad"), /* I1 */ + DB8500_PIN("GPIO164_B21", in_pd, "nmk-ske-keypad"), /* I0 */ + DB8500_PIN("GPIO157_A18", out_lo, "nmk-ske-keypad"), /* O7 */ + DB8500_PIN("GPIO158_C18", out_lo, "nmk-ske-keypad"), /* O6 */ + DB8500_PIN("GPIO159_B19", out_lo, "nmk-ske-keypad"), /* O5 */ + DB8500_PIN("GPIO160_B20", out_lo, "nmk-ske-keypad"), /* O4 */ + DB8500_PIN("GPIO165_C21", out_lo, "nmk-ske-keypad"), /* O3 */ + DB8500_PIN("GPIO166_A22", out_lo, "nmk-ske-keypad"), /* O2 */ + DB8500_PIN("GPIO167_B24", out_lo, "nmk-ske-keypad"), /* O1 */ + DB8500_PIN("GPIO168_C22", out_lo, "nmk-ske-keypad"), /* O0 */ + /* ske sleep state */ + DB8500_PIN_SLEEP("GPIO153_B17", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I7 */ + DB8500_PIN_SLEEP("GPIO154_C16", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I6 */ + DB8500_PIN_SLEEP("GPIO155_C19", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I5 */ + DB8500_PIN_SLEEP("GPIO156_C17", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I4 */ + DB8500_PIN_SLEEP("GPIO161_D21", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I3 */ + DB8500_PIN_SLEEP("GPIO162_D20", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I2 */ + DB8500_PIN_SLEEP("GPIO163_C20", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I1 */ + DB8500_PIN_SLEEP("GPIO164_B21", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I0 */ + DB8500_PIN_SLEEP("GPIO157_A18", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O7 */ + DB8500_PIN_SLEEP("GPIO158_C18", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O6 */ + DB8500_PIN_SLEEP("GPIO159_B19", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O5 */ + DB8500_PIN_SLEEP("GPIO160_B20", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O4 */ + DB8500_PIN_SLEEP("GPIO165_C21", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O3 */ + DB8500_PIN_SLEEP("GPIO166_A22", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O2 */ + DB8500_PIN_SLEEP("GPIO167_B24", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O1 */ + DB8500_PIN_SLEEP("GPIO168_C22", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O0 */ + + /* STM APE pins states */ + DB8500_MUX_STATE("stmape_c_1", "stmape", + "stm", "ape_mipi34"), + DB8500_PIN_STATE("GPIO70_G5", in_nopull, + "stm", "ape_mipi34"), /* clk */ + DB8500_PIN_STATE("GPIO71_G4", in_nopull, + "stm", "ape_mipi34"), /* dat3 */ + DB8500_PIN_STATE("GPIO72_H4", in_nopull, + "stm", "ape_mipi34"), /* dat2 */ + DB8500_PIN_STATE("GPIO73_H3", in_nopull, + "stm", "ape_mipi34"), /* dat1 */ + DB8500_PIN_STATE("GPIO74_J3", in_nopull, + "stm", "ape_mipi34"), /* dat0 */ + + DB8500_PIN_STATE("GPIO70_G5", slpm_out_lo_pdis, + "stm", "ape_mipi34_sleep"), /* clk */ + DB8500_PIN_STATE("GPIO71_G4", slpm_out_lo_pdis, + "stm", "ape_mipi34_sleep"), /* dat3 */ + DB8500_PIN_STATE("GPIO72_H4", slpm_out_lo_pdis, + "stm", "ape_mipi34_sleep"), /* dat2 */ + DB8500_PIN_STATE("GPIO73_H3", slpm_out_lo_pdis, + "stm", "ape_mipi34_sleep"), /* dat1 */ + DB8500_PIN_STATE("GPIO74_J3", slpm_out_lo_pdis, + "stm", "ape_mipi34_sleep"), /* dat0 */ + + DB8500_MUX_STATE("stmape_oc1_1", "stmape", + "stm", "ape_microsd"), + DB8500_PIN_STATE("GPIO23_AA4", in_nopull, + "stm", "ape_microsd"), /* clk */ + DB8500_PIN_STATE("GPIO25_Y4", in_nopull, + "stm", "ape_microsd"), /* dat0 */ + DB8500_PIN_STATE("GPIO26_Y2", in_nopull, + "stm", "ape_microsd"), /* dat1 */ + DB8500_PIN_STATE("GPIO27_AA2", in_nopull, + "stm", "ape_microsd"), /* dat2 */ + DB8500_PIN_STATE("GPIO28_AA1", in_nopull, + "stm", "ape_microsd"), /* dat3 */ + + DB8500_PIN_STATE("GPIO23_AA4", slpm_out_lo_wkup_pdis, + "stm", "ape_microsd_sleep"), /* clk */ + DB8500_PIN_STATE("GPIO25_Y4", slpm_in_wkup_pdis, + "stm", "ape_microsd_sleep"), /* dat0 */ + DB8500_PIN_STATE("GPIO26_Y2", slpm_in_wkup_pdis, + "stm", "ape_microsd_sleep"), /* dat1 */ + DB8500_PIN_STATE("GPIO27_AA2", slpm_in_wkup_pdis, + "stm", "ape_microsd_sleep"), /* dat2 */ + DB8500_PIN_STATE("GPIO28_AA1", slpm_in_wkup_pdis, + "stm", "ape_microsd_sleep"), /* dat3 */ + + /* STM Modem pins states */ + DB8500_MUX_STATE("stmmod_oc3_2", "stmmod", + "stm", "mod_mipi34"), + DB8500_MUX_STATE("uartmodrx_oc3_1", "uartmod", + "stm", "mod_mipi34"), + DB8500_MUX_STATE("uartmodtx_oc3_1", "uartmod", + "stm", "mod_mipi34"), + DB8500_PIN_STATE("GPIO70_G5", in_nopull, + "stm", "mod_mipi34"), /* clk */ + DB8500_PIN_STATE("GPIO71_G4", in_nopull, + "stm", "mod_mipi34"), /* dat3 */ + DB8500_PIN_STATE("GPIO72_H4", in_nopull, + "stm", "mod_mipi34"), /* dat2 */ + DB8500_PIN_STATE("GPIO73_H3", in_nopull, + "stm", "mod_mipi34"), /* dat1 */ + DB8500_PIN_STATE("GPIO74_J3", in_nopull, + "stm", "mod_mipi34"), /* dat0 */ + DB8500_PIN_STATE("GPIO75_H2", in_pu, + "stm", "mod_mipi34"), /* uartmod rx */ + DB8500_PIN_STATE("GPIO76_J2", out_lo, + "stm", "mod_mipi34"), /* uartmod tx */ + + DB8500_PIN_STATE("GPIO70_G5", slpm_out_lo_pdis, + "stm", "mod_mipi34_sleep"), /* clk */ + DB8500_PIN_STATE("GPIO71_G4", slpm_out_lo_pdis, + "stm", "mod_mipi34_sleep"), /* dat3 */ + DB8500_PIN_STATE("GPIO72_H4", slpm_out_lo_pdis, + "stm", "mod_mipi34_sleep"), /* dat2 */ + DB8500_PIN_STATE("GPIO73_H3", slpm_out_lo_pdis, + "stm", "mod_mipi34_sleep"), /* dat1 */ + DB8500_PIN_STATE("GPIO74_J3", slpm_out_lo_pdis, + "stm", "mod_mipi34_sleep"), /* dat0 */ + DB8500_PIN_STATE("GPIO75_H2", slpm_in_wkup_pdis, + "stm", "mod_mipi34_sleep"), /* uartmod rx */ + DB8500_PIN_STATE("GPIO76_J2", slpm_out_lo_wkup_pdis, + "stm", "mod_mipi34_sleep"), /* uartmod tx */ + + DB8500_MUX_STATE("stmmod_b_1", "stmmod", + "stm", "mod_microsd"), + DB8500_MUX_STATE("uartmodrx_oc3_1", "uartmod", + "stm", "mod_microsd"), + DB8500_MUX_STATE("uartmodtx_oc3_1", "uartmod", + "stm", "mod_microsd"), + DB8500_PIN_STATE("GPIO23_AA4", in_nopull, + "stm", "mod_microsd"), /* clk */ + DB8500_PIN_STATE("GPIO25_Y4", in_nopull, + "stm", "mod_microsd"), /* dat0 */ + DB8500_PIN_STATE("GPIO26_Y2", in_nopull, + "stm", "mod_microsd"), /* dat1 */ + DB8500_PIN_STATE("GPIO27_AA2", in_nopull, + "stm", "mod_microsd"), /* dat2 */ + DB8500_PIN_STATE("GPIO28_AA1", in_nopull, + "stm", "mod_microsd"), /* dat3 */ + DB8500_PIN_STATE("GPIO75_H2", in_pu, + "stm", "mod_microsd"), /* uartmod rx */ + DB8500_PIN_STATE("GPIO76_J2", out_lo, + "stm", "mod_microsd"), /* uartmod tx */ + + DB8500_PIN_STATE("GPIO23_AA4", slpm_out_lo_wkup_pdis, + "stm", "mod_microsd_sleep"), /* clk */ + DB8500_PIN_STATE("GPIO25_Y4", slpm_in_wkup_pdis, + "stm", "mod_microsd_sleep"), /* dat0 */ + DB8500_PIN_STATE("GPIO26_Y2", slpm_in_wkup_pdis, + "stm", "mod_microsd_sleep"), /* dat1 */ + DB8500_PIN_STATE("GPIO27_AA2", slpm_in_wkup_pdis, + "stm", "mod_microsd_sleep"), /* dat2 */ + DB8500_PIN_STATE("GPIO28_AA1", slpm_in_wkup_pdis, + "stm", "mod_microsd_sleep"), /* dat3 */ + DB8500_PIN_STATE("GPIO75_H2", slpm_in_wkup_pdis, + "stm", "mod_microsd_sleep"), /* uartmod rx */ + DB8500_PIN_STATE("GPIO76_J2", slpm_out_lo_wkup_pdis, + "stm", "mod_microsd_sleep"), /* uartmod tx */ + + /* STM dual Modem/APE pins state */ + DB8500_MUX_STATE("stmmod_oc3_2", "stmmod", + "stm", "mod_mipi34_ape_mipi60"), + DB8500_MUX_STATE("stmape_c_2", "stmape", + "stm", "mod_mipi34_ape_mipi60"), + DB8500_MUX_STATE("uartmodrx_oc3_1", "uartmod", + "stm", "mod_mipi34_ape_mipi60"), + DB8500_MUX_STATE("uartmodtx_oc3_1", "uartmod", + "stm", "mod_mipi34_ape_mipi60"), + DB8500_PIN_STATE("GPIO70_G5", in_nopull, + "stm", "mod_mipi34_ape_mipi60"), /* clk */ + DB8500_PIN_STATE("GPIO71_G4", in_nopull, + "stm", "mod_mipi34_ape_mipi60"), /* dat3 */ + DB8500_PIN_STATE("GPIO72_H4", in_nopull, + "stm", "mod_mipi34_ape_mipi60"), /* dat2 */ + DB8500_PIN_STATE("GPIO73_H3", in_nopull, + "stm", "mod_mipi34_ape_mipi60"), /* dat1 */ + DB8500_PIN_STATE("GPIO74_J3", in_nopull, + "stm", "mod_mipi34_ape_mipi60"), /* dat0 */ + DB8500_PIN_STATE("GPIO75_H2", in_pu, + "stm", "mod_mipi34_ape_mipi60"), /* uartmod rx */ + DB8500_PIN_STATE("GPIO76_J2", out_lo, + "stm", "mod_mipi34_ape_mipi60"), /* uartmod tx */ + DB8500_PIN_STATE("GPIO155_C19", in_nopull, + "stm", "mod_mipi34_ape_mipi60"), /* clk */ + DB8500_PIN_STATE("GPIO156_C17", in_nopull, + "stm", "mod_mipi34_ape_mipi60"), /* dat3 */ + DB8500_PIN_STATE("GPIO157_A18", in_nopull, + "stm", "mod_mipi34_ape_mipi60"), /* dat2 */ + DB8500_PIN_STATE("GPIO158_C18", in_nopull, + "stm", "mod_mipi34_ape_mipi60"), /* dat1 */ + DB8500_PIN_STATE("GPIO159_B19", in_nopull, + "stm", "mod_mipi34_ape_mipi60"), /* dat0 */ + + DB8500_PIN_STATE("GPIO70_G5", slpm_out_lo_pdis, + "stm", "mod_mipi34_ape_mipi60_sleep"), /* clk */ + DB8500_PIN_STATE("GPIO71_G4", slpm_out_lo_pdis, + "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat3 */ + DB8500_PIN_STATE("GPIO72_H4", slpm_out_lo_pdis, + "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat2 */ + DB8500_PIN_STATE("GPIO73_H3", slpm_out_lo_pdis, + "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat1 */ + DB8500_PIN_STATE("GPIO74_J3", slpm_out_lo_pdis, + "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat0 */ + DB8500_PIN_STATE("GPIO75_H2", slpm_in_wkup_pdis, + "stm", "mod_mipi34_ape_mipi60_sleep"), /* uartmod rx */ + DB8500_PIN_STATE("GPIO76_J2", slpm_out_lo_wkup_pdis, + "stm", "mod_mipi34_ape_mipi60_sleep"), /* uartmod tx */ + DB8500_PIN_STATE("GPIO155_C19", slpm_in_wkup_pdis, + "stm", "mod_mipi34_ape_mipi60_sleep"), /* clk */ + DB8500_PIN_STATE("GPIO156_C17", slpm_in_wkup_pdis, + "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat3 */ + DB8500_PIN_STATE("GPIO157_A18", slpm_in_wkup_pdis, + "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat2 */ + DB8500_PIN_STATE("GPIO158_C18", slpm_in_wkup_pdis, + "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat1 */ + DB8500_PIN_STATE("GPIO159_B19", slpm_in_wkup_pdis, + "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat0 */ }; /* @@ -268,32 +571,48 @@ static struct pinctrl_map __initdata mop500_pinmap[] = { DB8500_PIN_HOG("GPIO217_AH12", gpio_in_pu), /* Mux in UART1 and set the pull-ups */ DB8500_MUX_HOG("u1rxtx_a_1", "u1"), - DB8500_MUX_HOG("u1ctsrts_a_1", "u1"), DB8500_PIN_HOG("GPIO4_AH6", in_pu), /* RXD */ DB8500_PIN_HOG("GPIO5_AG6", out_hi), /* TXD */ - DB8500_PIN_HOG("GPIO6_AF6", in_pu), /* CTS */ - DB8500_PIN_HOG("GPIO7_AG5", out_hi), /* RTS */ /* * Runtime stuff: make it possible to mux in the SKE keypad * and bias the pins */ - DB8500_MUX("kp_a_2", "kp", "ske"), - DB8500_PIN("GPIO153_B17", in_pd_slpm_in_pu, "ske"), /* I7 */ - DB8500_PIN("GPIO154_C16", in_pd_slpm_in_pu, "ske"), /* I6 */ - DB8500_PIN("GPIO155_C19", in_pd_slpm_in_pu, "ske"), /* I5 */ - DB8500_PIN("GPIO156_C17", in_pd_slpm_in_pu, "ske"), /* I4 */ - DB8500_PIN("GPIO161_D21", in_pd_slpm_in_pu, "ske"), /* I3 */ - DB8500_PIN("GPIO162_D20", in_pd_slpm_in_pu, "ske"), /* I2 */ - DB8500_PIN("GPIO163_C20", in_pd_slpm_in_pu, "ske"), /* I1 */ - DB8500_PIN("GPIO164_B21", in_pd_slpm_in_pu, "ske"), /* I0 */ - DB8500_PIN("GPIO157_A18", in_pu_slpm_out_lo, "ske"), /* O7 */ - DB8500_PIN("GPIO158_C18", in_pu_slpm_out_lo, "ske"), /* O6 */ - DB8500_PIN("GPIO159_B19", in_pu_slpm_out_lo, "ske"), /* O5 */ - DB8500_PIN("GPIO160_B20", in_pu_slpm_out_lo, "ske"), /* O4 */ - DB8500_PIN("GPIO165_C21", in_pu_slpm_out_lo, "ske"), /* O3 */ - DB8500_PIN("GPIO166_A22", in_pu_slpm_out_lo, "ske"), /* O2 */ - DB8500_PIN("GPIO167_B24", in_pu_slpm_out_lo, "ske"), /* O1 */ - DB8500_PIN("GPIO168_C22", in_pu_slpm_out_lo, "ske"), /* O0 */ + /* ske default state */ + DB8500_MUX("kp_a_2", "kp", "nmk-ske-keypad"), + DB8500_PIN("GPIO153_B17", in_pu, "nmk-ske-keypad"), /* I7 */ + DB8500_PIN("GPIO154_C16", in_pu, "nmk-ske-keypad"), /* I6 */ + DB8500_PIN("GPIO155_C19", in_pu, "nmk-ske-keypad"), /* I5 */ + DB8500_PIN("GPIO156_C17", in_pu, "nmk-ske-keypad"), /* I4 */ + DB8500_PIN("GPIO161_D21", in_pu, "nmk-ske-keypad"), /* I3 */ + DB8500_PIN("GPIO162_D20", in_pu, "nmk-ske-keypad"), /* I2 */ + DB8500_PIN("GPIO163_C20", in_pu, "nmk-ske-keypad"), /* I1 */ + DB8500_PIN("GPIO164_B21", in_pu, "nmk-ske-keypad"), /* I0 */ + DB8500_PIN("GPIO157_A18", out_lo, "nmk-ske-keypad"), /* O7 */ + DB8500_PIN("GPIO158_C18", out_lo, "nmk-ske-keypad"), /* O6 */ + DB8500_PIN("GPIO159_B19", out_lo, "nmk-ske-keypad"), /* O5 */ + DB8500_PIN("GPIO160_B20", out_lo, "nmk-ske-keypad"), /* O4 */ + DB8500_PIN("GPIO165_C21", out_lo, "nmk-ske-keypad"), /* O3 */ + DB8500_PIN("GPIO166_A22", out_lo, "nmk-ske-keypad"), /* O2 */ + DB8500_PIN("GPIO167_B24", out_lo, "nmk-ske-keypad"), /* O1 */ + DB8500_PIN("GPIO168_C22", out_lo, "nmk-ske-keypad"), /* O0 */ + /* ske sleep state */ + DB8500_PIN_SLEEP("GPIO153_B17", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I7 */ + DB8500_PIN_SLEEP("GPIO154_C16", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I6 */ + DB8500_PIN_SLEEP("GPIO155_C19", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I5 */ + DB8500_PIN_SLEEP("GPIO156_C17", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I4 */ + DB8500_PIN_SLEEP("GPIO161_D21", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I3 */ + DB8500_PIN_SLEEP("GPIO162_D20", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I2 */ + DB8500_PIN_SLEEP("GPIO163_C20", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I1 */ + DB8500_PIN_SLEEP("GPIO164_B21", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I0 */ + DB8500_PIN_SLEEP("GPIO157_A18", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O7 */ + DB8500_PIN_SLEEP("GPIO158_C18", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O6 */ + DB8500_PIN_SLEEP("GPIO159_B19", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O5 */ + DB8500_PIN_SLEEP("GPIO160_B20", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O4 */ + DB8500_PIN_SLEEP("GPIO165_C21", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O3 */ + DB8500_PIN_SLEEP("GPIO166_A22", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O2 */ + DB8500_PIN_SLEEP("GPIO167_B24", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O1 */ + DB8500_PIN_SLEEP("GPIO168_C22", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O0 */ + /* Mux in and drive the SDI0 DAT31DIR line high at runtime */ DB8500_MUX("mc0dat31dir_a_1", "mc0", "sdi0"), DB8500_PIN("GPIO21_AB3", out_hi, "sdi0"), @@ -396,28 +715,6 @@ static struct pinctrl_map __initdata hrefv60_pinmap[] = { DB8500_PIN("GPIO217_AH12", gpio_in_pu_slpm_gpio_nopull, "gpio-keys.0"), DB8500_PIN("GPIO145_C13", gpio_in_pd_slpm_gpio_nopull, "gpio-keys.0"), DB8500_PIN("GPIO139_C9", gpio_in_pu_slpm_gpio_nopull, "gpio-keys.0"), - /* - * Make it possible to mux in the SKE keypad and bias the pins - * FIXME: what's the point with this on HREFv60? KP/SKE is already - * muxed in at another place! Enabling this will bork. - */ - DB8500_MUX("kp_a_2", "kp", "ske"), - DB8500_PIN("GPIO153_B17", in_pd_slpm_in_pu, "ske"), /* I7 */ - DB8500_PIN("GPIO154_C16", in_pd_slpm_in_pu, "ske"), /* I6 */ - DB8500_PIN("GPIO155_C19", in_pd_slpm_in_pu, "ske"), /* I5 */ - DB8500_PIN("GPIO156_C17", in_pd_slpm_in_pu, "ske"), /* I4 */ - DB8500_PIN("GPIO161_D21", in_pd_slpm_in_pu, "ske"), /* I3 */ - DB8500_PIN("GPIO162_D20", in_pd_slpm_in_pu, "ske"), /* I2 */ - DB8500_PIN("GPIO163_C20", in_pd_slpm_in_pu, "ske"), /* I1 */ - DB8500_PIN("GPIO164_B21", in_pd_slpm_in_pu, "ske"), /* I0 */ - DB8500_PIN("GPIO157_A18", in_pu_slpm_out_lo, "ske"), /* O7 */ - DB8500_PIN("GPIO158_C18", in_pu_slpm_out_lo, "ske"), /* O6 */ - DB8500_PIN("GPIO159_B19", in_pu_slpm_out_lo, "ske"), /* O5 */ - DB8500_PIN("GPIO160_B20", in_pu_slpm_out_lo, "ske"), /* O4 */ - DB8500_PIN("GPIO165_C21", in_pu_slpm_out_lo, "ske"), /* O3 */ - DB8500_PIN("GPIO166_A22", in_pu_slpm_out_lo, "ske"), /* O2 */ - DB8500_PIN("GPIO167_B24", in_pu_slpm_out_lo, "ske"), /* O1 */ - DB8500_PIN("GPIO168_C22", in_pu_slpm_out_lo, "ske"), /* O0 */ }; static struct pinctrl_map __initdata u9500_pinmap[] = { |