diff options
Diffstat (limited to 'arch')
184 files changed, 3374 insertions, 2311 deletions
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index 189d5ea..786491f 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -479,6 +479,9 @@ config EISA depends on ALPHA_GENERIC || ALPHA_JENSEN || ALPHA_ALCOR || ALPHA_MIKASA || ALPHA_SABLE || ALPHA_LYNX || ALPHA_NORITAKE || ALPHA_RAWHIDE default y +config ARCH_MAY_HAVE_PC_FDC + def_bool y + config SMP bool "Symmetric multi-processing support" depends on ALPHA_SABLE || ALPHA_LYNX || ALPHA_RAWHIDE || ALPHA_DP264 || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_GENERIC || ALPHA_SHARK || ALPHA_MARVEL diff --git a/arch/alpha/kernel/time.c b/arch/alpha/kernel/time.c index 8226c5c..67be50b 100644 --- a/arch/alpha/kernel/time.c +++ b/arch/alpha/kernel/time.c @@ -149,7 +149,7 @@ irqreturn_t timer_interrupt(int irq, void *dev, struct pt_regs * regs) * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be * called as close as possible to 500 ms before the new second starts. */ - if ((time_status & STA_UNSYNC) == 0 + if (ntp_synced() && xtime.tv_sec > state.last_rtc_update + 660 && xtime.tv_nsec >= 500000 - ((unsigned) TICK_SIZE) / 2 && xtime.tv_nsec <= 500000 + ((unsigned) TICK_SIZE) / 2) { @@ -502,10 +502,7 @@ do_settimeofday(struct timespec *tv) set_normalized_timespec(&xtime, sec, nsec); set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); clock_was_set(); diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 68dfdba..0f2899b 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -64,6 +64,9 @@ config GENERIC_CALIBRATE_DELAY config GENERIC_BUST_SPINLOCK bool +config ARCH_MAY_HAVE_PC_FDC + bool + config GENERIC_ISA_DMA bool @@ -150,6 +153,7 @@ config ARCH_RPC select ARCH_ACORN select FIQ select TIMER_ACORN + select ARCH_MAY_HAVE_PC_FDC help On the Acorn Risc-PC, Linux can support the internal IDE disk and CD-ROM interface, serial and parallel port, and the floppy drive. diff --git a/arch/arm/boot/compressed/head-sharpsl.S b/arch/arm/boot/compressed/head-sharpsl.S index d6bf8a2..59ad696 100644 --- a/arch/arm/boot/compressed/head-sharpsl.S +++ b/arch/arm/boot/compressed/head-sharpsl.S @@ -7,7 +7,8 @@ * so we have to figure out the machine for ourselves... * * Support for Poodle, Corgi (SL-C700), Shepherd (SL-C750) - * and Husky (SL-C760). + * Husky (SL-C760), Tosa (SL-C6000), Spitz (SL-C3000), + * Akita (SL-C1000) and Borzoi (SL-C3100). * */ @@ -23,6 +24,22 @@ __SharpSL_start: +/* Check for TC6393 - if found we have a Tosa */ + ldr r7, .TOSAID + mov r1, #0x10000000 @ Base address of TC6393 chip + mov r6, #0x03 + ldrh r3, [r1, #8] @ Load TC6393XB Revison: This is 0x0003 + cmp r6, r3 + beq .SHARPEND @ Success -> tosa + +/* Check for pxa270 - if found, branch */ + mrc p15, 0, r4, c0, c0 @ Get Processor ID + and r4, r4, #0xffffff00 + ldr r3, .PXA270ID + cmp r4, r3 + beq .PXA270 + +/* Check for w100 - if not found we have a Poodle */ ldr r1, .W100ADDR @ Base address of w100 chip + regs offset mov r6, #0x31 @ Load Magic Init value @@ -30,7 +47,7 @@ __SharpSL_start: mov r5, #0x3000 .W100LOOP: subs r5, r5, #1 - bne .W100LOOP + bne .W100LOOP mov r6, #0x30 @ Load 2nd Magic Init value str r6, [r1, #0x280] @ to SCRATCH_UMSK @@ -40,45 +57,52 @@ __SharpSL_start: cmp r6, r3 bne .SHARPEND @ We have no w100 - Poodle - mrc p15, 0, r6, c0, c0 @ Get Processor ID - and r6, r6, #0xffffff00 +/* Check for pxa250 - if found we have a Corgi */ ldr r7, .CORGIID ldr r3, .PXA255ID - cmp r6, r3 + cmp r4, r3 blo .SHARPEND @ We have a PXA250 - Corgi - mov r1, #0x0c000000 @ Base address of NAND chip - ldrb r3, [r1, #24] @ Load FLASHCTL - bic r3, r3, #0x11 @ SET NCE - orr r3, r3, #0x0a @ SET CLR + FLWP - strb r3, [r1, #24] @ Save to FLASHCTL - mov r2, #0x90 @ Command "readid" - strb r2, [r1, #20] @ Save to FLASHIO - bic r3, r3, #2 @ CLR CLE - orr r3, r3, #4 @ SET ALE - strb r3, [r1, #24] @ Save to FLASHCTL - mov r2, #0 @ Address 0x00 - strb r2, [r1, #20] @ Save to FLASHIO - bic r3, r3, #4 @ CLR ALE - strb r3, [r1, #24] @ Save to FLASHCTL -.SHARP1: - ldrb r3, [r1, #24] @ Load FLASHCTL - tst r3, #32 @ Is chip ready? - beq .SHARP1 - ldrb r2, [r1, #20] @ NAND Manufacturer ID - ldrb r3, [r1, #20] @ NAND Chip ID +/* Check for 64MiB flash - if found we have a Shepherd */ + bl get_flash_ids ldr r7, .SHEPHERDID cmp r3, #0x76 @ 64MiB flash beq .SHARPEND @ We have Shepherd + +/* Must be a Husky */ ldr r7, .HUSKYID @ Must be Husky b .SHARPEND +.PXA270: +/* Check for 16MiB flash - if found we have Spitz */ + bl get_flash_ids + ldr r7, .SPITZID + cmp r3, #0x73 @ 16MiB flash + beq .SHARPEND @ We have Spitz + +/* Check for a second SCOOP chip - if found we have Borzoi */ + ldr r1, .SCOOP2ADDR + ldr r7, .BORZOIID + mov r6, #0x0140 + strh r6, [r1] + ldrh r6, [r1] + cmp r6, #0x0140 + beq .SHARPEND @ We have Borzoi + +/* Must be Akita */ + ldr r7, .AKITAID + b .SHARPEND @ We have Borzoi + .PXA255ID: .word 0x69052d00 @ PXA255 Processor ID +.PXA270ID: + .word 0x69054100 @ PXA270 Processor ID .W100ID: .word 0x57411002 @ w100 Chip ID .W100ADDR: .word 0x08010000 @ w100 Chip ID Reg Address +.SCOOP2ADDR: + .word 0x08800040 .POODLEID: .word MACH_TYPE_POODLE .CORGIID: @@ -87,6 +111,41 @@ __SharpSL_start: .word MACH_TYPE_SHEPHERD .HUSKYID: .word MACH_TYPE_HUSKY -.SHARPEND: +.TOSAID: + .word MACH_TYPE_TOSA +.SPITZID: + .word MACH_TYPE_SPITZ +.AKITAID: + .word MACH_TYPE_AKITA +.BORZOIID: + .word MACH_TYPE_BORZOI +/* + * Return: r2 - NAND Manufacturer ID + * r3 - NAND Chip ID + * Corrupts: r1 + */ +get_flash_ids: + mov r1, #0x0c000000 @ Base address of NAND chip + ldrb r3, [r1, #24] @ Load FLASHCTL + bic r3, r3, #0x11 @ SET NCE + orr r3, r3, #0x0a @ SET CLR + FLWP + strb r3, [r1, #24] @ Save to FLASHCTL + mov r2, #0x90 @ Command "readid" + strb r2, [r1, #20] @ Save to FLASHIO + bic r3, r3, #2 @ CLR CLE + orr r3, r3, #4 @ SET ALE + strb r3, [r1, #24] @ Save to FLASHCTL + mov r2, #0 @ Address 0x00 + strb r2, [r1, #20] @ Save to FLASHIO + bic r3, r3, #4 @ CLR ALE + strb r3, [r1, #24] @ Save to FLASHCTL +.fids1: + ldrb r3, [r1, #24] @ Load FLASHCTL + tst r3, #32 @ Is chip ready? + beq .fids1 + ldrb r2, [r1, #20] @ NAND Manufacturer ID + ldrb r3, [r1, #20] @ NAND Chip ID + mov pc, lr +.SHARPEND: diff --git a/arch/arm/configs/omap_h2_1610_defconfig b/arch/arm/configs/omap_h2_1610_defconfig index 2495526..4198677 100644 --- a/arch/arm/configs/omap_h2_1610_defconfig +++ b/arch/arm/configs/omap_h2_1610_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-rc2 -# Fri Jul 8 04:49:34 2005 +# Linux kernel version: 2.6.13 +# Mon Sep 5 18:07:12 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -102,9 +102,11 @@ CONFIG_OMAP_MUX_WARNINGS=y # CONFIG_OMAP_MPU_TIMER is not set CONFIG_OMAP_32K_TIMER=y CONFIG_OMAP_32K_TIMER_HZ=128 +# CONFIG_OMAP_DM_TIMER is not set CONFIG_OMAP_LL_DEBUG_UART1=y # CONFIG_OMAP_LL_DEBUG_UART2 is not set # CONFIG_OMAP_LL_DEBUG_UART3 is not set +CONFIG_OMAP_SERIAL_WAKE=y # # OMAP Core Type @@ -166,7 +168,6 @@ CONFIG_ISA_DMA_API=y # # Kernel Features # -# CONFIG_SMP is not set CONFIG_PREEMPT=y CONFIG_NO_IDLE_HZ=y # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set @@ -230,91 +231,82 @@ CONFIG_PM=y # CONFIG_APM is not set # -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set - -# -# Memory Technology Devices (MTD) +# Networking # -CONFIG_MTD=y -CONFIG_MTD_DEBUG=y -CONFIG_MTD_DEBUG_VERBOSE=3 -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_AFS_PARTS is not set +CONFIG_NET=y # -# User Modules And Translation Layers +# Networking options # -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_IP_TCPDIAG=y +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set # -# RAM/ROM/Flash chip drivers +# SCTP Configuration (EXPERIMENTAL) # -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -CONFIG_MTD_CFI_INTELEXT=y -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set # -# Mapping drivers for chip access +# Network testing # -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set -# CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_EDB7312 is not set +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set # -# Self-contained MTD device drivers +# Device Drivers # -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set -# CONFIG_MTD_BLOCK2MTD is not set # -# Disk-On-Chip Device Drivers +# Generic Driver Options # -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set # -# NAND Flash Device Drivers +# Memory Technology Devices (MTD) # -# CONFIG_MTD_NAND is not set +# CONFIG_MTD is not set # # Parallel port support @@ -403,72 +395,8 @@ CONFIG_SCSI_PROC_FS=y # # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) +# Network device support # -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set @@ -518,6 +446,8 @@ CONFIG_SLIP_COMPRESSED=y # CONFIG_SLIP_MODE_SLIP6 is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -615,77 +545,15 @@ CONFIG_WATCHDOG_NOWAYOUT=y # # I2C support # -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ISA is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_PCA_ISA is not set +# CONFIG_I2C is not set +# CONFIG_I2C_SENSOR is not set +CONFIG_ISP1301_OMAP=y # -# Hardware Sensors Chip support +# Hardware Monitoring support # -# CONFIG_I2C_SENSOR is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set - -# -# Other I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -CONFIG_ISP1301_OMAP=y -CONFIG_TPS65010=y -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_HWMON=y +# CONFIG_HWMON_DEBUG_CHIP is not set # # Misc devices @@ -756,15 +624,9 @@ CONFIG_SOUND=y # Open Sound System # CONFIG_SOUND_PRIME=y -# CONFIG_SOUND_BT878 is not set -# CONFIG_SOUND_FUSION is not set -# CONFIG_SOUND_CS4281 is not set -# CONFIG_SOUND_SONICVIBES is not set -# CONFIG_SOUND_TRIDENT is not set # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set # CONFIG_SOUND_OSS is not set -# CONFIG_SOUND_TVMIXER is not set # CONFIG_SOUND_AD1980 is not set # @@ -810,6 +672,7 @@ CONFIG_EXT2_FS=y # CONFIG_JBD is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set # # XFS support @@ -817,6 +680,7 @@ CONFIG_EXT2_FS=y # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set CONFIG_ROMFS_FS=y +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -857,15 +721,6 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=2 -# CONFIG_JFFS2_FS_NAND is not set -# CONFIG_JFFS2_FS_NOR_ECC is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set @@ -1007,4 +862,3 @@ CONFIG_CRYPTO_DES=y CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index 8880482..69449a8 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -102,7 +102,7 @@ static unsigned long next_rtc_update; */ static inline void do_set_rtc(void) { - if (time_status & STA_UNSYNC || set_rtc == NULL) + if (!ntp_synced() || set_rtc == NULL) return; if (next_rtc_update && @@ -292,10 +292,7 @@ int do_settimeofday(struct timespec *tv) set_normalized_timespec(&xtime, sec, nsec); set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); clock_was_set(); return 0; diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig index 324d9ed..bdd2579 100644 --- a/arch/arm/mach-footbridge/Kconfig +++ b/arch/arm/mach-footbridge/Kconfig @@ -87,6 +87,7 @@ config FOOTBRIDGE_ADDIN # EBSA285 board in either host or addin mode config ARCH_EBSA285 + select ARCH_MAY_HAVE_PC_FDC bool endif diff --git a/arch/arm/mach-iop3xx/iop321-time.c b/arch/arm/mach-iop3xx/iop321-time.c index d53af16..0039793 100644 --- a/arch/arm/mach-iop3xx/iop321-time.c +++ b/arch/arm/mach-iop3xx/iop321-time.c @@ -60,7 +60,7 @@ static unsigned long iop321_gettimeoffset(void) /* * Now convert them to usec. */ - usec = (unsigned long)(elapsed * (tick_nsec / 1000)) / LATCH; + usec = (unsigned long)(elapsed / (CLOCK_TICK_RATE/1000000)); return usec; } diff --git a/arch/arm/mach-iop3xx/iop331-time.c b/arch/arm/mach-iop3xx/iop331-time.c index 1a6d9d6..8eddfac 100644 --- a/arch/arm/mach-iop3xx/iop331-time.c +++ b/arch/arm/mach-iop3xx/iop331-time.c @@ -58,7 +58,7 @@ static unsigned long iop331_gettimeoffset(void) /* * Now convert them to usec. */ - usec = (unsigned long)(elapsed * (tick_nsec / 1000)) / LATCH; + usec = (unsigned long)(elapsed / (CLOCK_TICK_RATE/1000000)); return usec; } diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c index 781d10a..098c817 100644 --- a/arch/arm/mach-ixp2000/core.c +++ b/arch/arm/mach-ixp2000/core.c @@ -382,7 +382,7 @@ static void ixp2000_GPIO_irq_unmask(unsigned int irq) static struct irqchip ixp2000_GPIO_irq_chip = { .ack = ixp2000_GPIO_irq_mask_ack, .mask = ixp2000_GPIO_irq_mask, - .unmask = ixp2000_GPIO_irq_unmask + .unmask = ixp2000_GPIO_irq_unmask, .set_type = ixp2000_GPIO_irq_type, }; diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 0422e90..52ad113 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -179,17 +179,17 @@ static void ixp4xx_irq_level_unmask(unsigned int irq) } static struct irqchip ixp4xx_irq_level_chip = { - .ack = ixp4xx_irq_mask, - .mask = ixp4xx_irq_mask, - .unmask = ixp4xx_irq_level_unmask, - .type = ixp4xx_set_irq_type + .ack = ixp4xx_irq_mask, + .mask = ixp4xx_irq_mask, + .unmask = ixp4xx_irq_level_unmask, + .set_type = ixp4xx_set_irq_type, }; static struct irqchip ixp4xx_irq_edge_chip = { - .ack = ixp4xx_irq_ack, - .mask = ixp4xx_irq_mask, - .unmask = ixp4xx_irq_unmask, - .type = ixp4xx_set_irq_type + .ack = ixp4xx_irq_ack, + .mask = ixp4xx_irq_mask, + .unmask = ixp4xx_irq_unmask, + .set_type = ixp4xx_set_irq_type, }; static void ixp4xx_config_irq(unsigned irq, enum ixp4xx_irq_type type) diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index a11b6d8..afd5d67 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -165,10 +165,10 @@ static struct omap_irq_bank omap1610_irq_banks[] = { #endif static struct irqchip omap_irq_chip = { - .ack = omap_mask_ack_irq, - .mask = omap_mask_irq, - .unmask = omap_unmask_irq, - .wake = omap_wake_irq, + .ack = omap_mask_ack_irq, + .mask = omap_mask_irq, + .unmask = omap_unmask_irq, + .set_wake = omap_wake_irq, }; void __init omap_init_irq(void) diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index efc2f65..33dae99 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -11,7 +11,7 @@ obj-$(CONFIG_PXA27x) += pxa27x.o obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o obj-$(CONFIG_ARCH_PXA_IDP) += idp.o -obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o ssp.o +obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o ssp.o obj-$(CONFIG_MACH_POODLE) += poodle.o # Support for blinky lights diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 06ea730..29185ac 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -39,7 +39,6 @@ #include <asm/mach/sharpsl_param.h> #include <asm/hardware/scoop.h> -#include <video/w100fb.h> #include "generic.h" @@ -87,7 +86,7 @@ struct platform_device corgiscoop_device = { * also use scoop functions and this makes the power up/down order * work correctly. */ -static struct platform_device corgissp_device = { +struct platform_device corgissp_device = { .name = "corgi-ssp", .dev = { .parent = &corgiscoop_device.dev, @@ -97,41 +96,33 @@ static struct platform_device corgissp_device = { /* - * Corgi w100 Frame Buffer Device + * Corgi Backlight Device */ -static struct w100fb_mach_info corgi_fb_info = { - .w100fb_ssp_send = corgi_ssp_lcdtg_send, - .comadj = -1, - .phadadj = -1, -}; - -static struct resource corgi_fb_resources[] = { - [0] = { - .start = 0x08000000, - .end = 0x08ffffff, - .flags = IORESOURCE_MEM, +static struct platform_device corgibl_device = { + .name = "corgi-bl", + .dev = { + .parent = &corgifb_device.dev, }, + .id = -1, }; -static struct platform_device corgifb_device = { - .name = "w100fb", + +/* + * Corgi Keyboard Device + */ +static struct platform_device corgikbd_device = { + .name = "corgi-keyboard", .id = -1, - .dev = { - .platform_data = &corgi_fb_info, - .parent = &corgissp_device.dev, - }, - .num_resources = ARRAY_SIZE(corgi_fb_resources), - .resource = corgi_fb_resources, }; /* - * Corgi Backlight Device + * Corgi Touch Screen Device */ -static struct platform_device corgibl_device = { - .name = "corgi-bl", +static struct platform_device corgits_device = { + .name = "corgi-ts", .dev = { - .parent = &corgifb_device.dev, + .parent = &corgissp_device.dev, }, .id = -1, }; @@ -199,6 +190,11 @@ static void corgi_mci_setpower(struct device *dev, unsigned int vdd) } } +static int corgi_mci_get_ro(struct device *dev) +{ + return GPLR(CORGI_GPIO_nSD_WP) & GPIO_bit(CORGI_GPIO_nSD_WP); +} + static void corgi_mci_exit(struct device *dev, void *data) { free_irq(CORGI_IRQ_GPIO_nSD_DETECT, data); @@ -208,11 +204,13 @@ static void corgi_mci_exit(struct device *dev, void *data) static struct pxamci_platform_data corgi_mci_platform_data = { .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .init = corgi_mci_init, + .get_ro = corgi_mci_get_ro, .setpower = corgi_mci_setpower, .exit = corgi_mci_exit, }; + /* * USB Device Controller */ @@ -238,14 +236,13 @@ static struct platform_device *devices[] __initdata = { &corgiscoop_device, &corgissp_device, &corgifb_device, + &corgikbd_device, &corgibl_device, + &corgits_device, }; static void __init corgi_init(void) { - corgi_fb_info.comadj=sharpsl_param.comadj; - corgi_fb_info.phadadj=sharpsl_param.phadadj; - pxa_gpio_mode(CORGI_GPIO_USB_PULLUP | GPIO_OUT); pxa_set_udc_info(&udc_info); pxa_set_mci_info(&corgi_mci_platform_data); diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c new file mode 100644 index 0000000..deac29c --- /dev/null +++ b/arch/arm/mach-pxa/corgi_lcd.c @@ -0,0 +1,396 @@ +/* + * linux/drivers/video/w100fb.c + * + * Corgi LCD Specific Code for ATI Imageon w100 (Wallaby) + * + * Copyright (C) 2005 Richard Purdie + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/device.h> +#include <asm/arch/corgi.h> +#include <asm/mach/sharpsl_param.h> +#include <video/w100fb.h> + +/* Register Addresses */ +#define RESCTL_ADRS 0x00 +#define PHACTRL_ADRS 0x01 +#define DUTYCTRL_ADRS 0x02 +#define POWERREG0_ADRS 0x03 +#define POWERREG1_ADRS 0x04 +#define GPOR3_ADRS 0x05 +#define PICTRL_ADRS 0x06 +#define POLCTRL_ADRS 0x07 + +/* Resgister Bit Definitions */ +#define RESCTL_QVGA 0x01 +#define RESCTL_VGA 0x00 + +#define POWER1_VW_ON 0x01 /* VW Supply FET ON */ +#define POWER1_GVSS_ON 0x02 /* GVSS(-8V) Power Supply ON */ +#define POWER1_VDD_ON 0x04 /* VDD(8V),SVSS(-4V) Power Supply ON */ + +#define POWER1_VW_OFF 0x00 /* VW Supply FET OFF */ +#define POWER1_GVSS_OFF 0x00 /* GVSS(-8V) Power Supply OFF */ +#define POWER1_VDD_OFF 0x00 /* VDD(8V),SVSS(-4V) Power Supply OFF */ + +#define POWER0_COM_DCLK 0x01 /* COM Voltage DC Bias DAC Serial Data Clock */ +#define POWER0_COM_DOUT 0x02 /* COM Voltage DC Bias DAC Serial Data Out */ +#define POWER0_DAC_ON 0x04 /* DAC Power Supply ON */ +#define POWER0_COM_ON 0x08 /* COM Powewr Supply ON */ +#define POWER0_VCC5_ON 0x10 /* VCC5 Power Supply ON */ + +#define POWER0_DAC_OFF 0x00 /* DAC Power Supply OFF */ +#define POWER0_COM_OFF 0x00 /* COM Powewr Supply OFF */ +#define POWER0_VCC5_OFF 0x00 /* VCC5 Power Supply OFF */ + +#define PICTRL_INIT_STATE 0x01 +#define PICTRL_INIOFF 0x02 +#define PICTRL_POWER_DOWN 0x04 +#define PICTRL_COM_SIGNAL_OFF 0x08 +#define PICTRL_DAC_SIGNAL_OFF 0x10 + +#define POLCTRL_SYNC_POL_FALL 0x01 +#define POLCTRL_EN_POL_FALL 0x02 +#define POLCTRL_DATA_POL_FALL 0x04 +#define POLCTRL_SYNC_ACT_H 0x08 +#define POLCTRL_EN_ACT_L 0x10 + +#define POLCTRL_SYNC_POL_RISE 0x00 +#define POLCTRL_EN_POL_RISE 0x00 +#define POLCTRL_DATA_POL_RISE 0x00 +#define POLCTRL_SYNC_ACT_L 0x00 +#define POLCTRL_EN_ACT_H 0x00 + +#define PHACTRL_PHASE_MANUAL 0x01 +#define DEFAULT_PHAD_QVGA (9) +#define DEFAULT_COMADJ (125) + +/* + * This is only a psuedo I2C interface. We can't use the standard kernel + * routines as the interface is write only. We just assume the data is acked... + */ +static void lcdtg_ssp_i2c_send(u8 data) +{ + corgi_ssp_lcdtg_send(POWERREG0_ADRS, data); + udelay(10); +} + +static void lcdtg_i2c_send_bit(u8 data) +{ + lcdtg_ssp_i2c_send(data); + lcdtg_ssp_i2c_send(data | POWER0_COM_DCLK); + lcdtg_ssp_i2c_send(data); +} + +static void lcdtg_i2c_send_start(u8 base) +{ + lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT); + lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK); + lcdtg_ssp_i2c_send(base); +} + +static void lcdtg_i2c_send_stop(u8 base) +{ + lcdtg_ssp_i2c_send(base); + lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK); + lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT); +} + +static void lcdtg_i2c_send_byte(u8 base, u8 data) +{ + int i; + for (i = 0; i < 8; i++) { + if (data & 0x80) + lcdtg_i2c_send_bit(base | POWER0_COM_DOUT); + else + lcdtg_i2c_send_bit(base); + data <<= 1; + } +} + +static void lcdtg_i2c_wait_ack(u8 base) +{ + lcdtg_i2c_send_bit(base); +} + +static void lcdtg_set_common_voltage(u8 base_data, u8 data) +{ + /* Set Common Voltage to M62332FP via I2C */ + lcdtg_i2c_send_start(base_data); + lcdtg_i2c_send_byte(base_data, 0x9c); + lcdtg_i2c_wait_ack(base_data); + lcdtg_i2c_send_byte(base_data, 0x00); + lcdtg_i2c_wait_ack(base_data); + lcdtg_i2c_send_byte(base_data, data); + lcdtg_i2c_wait_ack(base_data); + lcdtg_i2c_send_stop(base_data); +} + +/* Set Phase Adjuct */ +static void lcdtg_set_phadadj(struct w100fb_par *par) +{ + int adj; + switch(par->xres) { + case 480: + case 640: + /* Setting for VGA */ + adj = sharpsl_param.phadadj; + if (adj < 0) { + adj = PHACTRL_PHASE_MANUAL; + } else { + adj = ((adj & 0x0f) << 1) | PHACTRL_PHASE_MANUAL; + } + break; + case 240: + case 320: + default: + /* Setting for QVGA */ + adj = (DEFAULT_PHAD_QVGA << 1) | PHACTRL_PHASE_MANUAL; + break; + } + + corgi_ssp_lcdtg_send(PHACTRL_ADRS, adj); +} + +static int lcd_inited; + +static void lcdtg_hw_init(struct w100fb_par *par) +{ + if (!lcd_inited) { + int comadj; + + /* Initialize Internal Logic & Port */ + corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_POWER_DOWN | PICTRL_INIOFF | PICTRL_INIT_STATE + | PICTRL_COM_SIGNAL_OFF | PICTRL_DAC_SIGNAL_OFF); + + corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_OFF + | POWER0_COM_OFF | POWER0_VCC5_OFF); + + corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF); + + /* VDD(+8V), SVSS(-4V) ON */ + corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON); + mdelay(3); + + /* DAC ON */ + corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON + | POWER0_COM_OFF | POWER0_VCC5_OFF); + + /* INIB = H, INI = L */ + /* PICTL[0] = H , PICTL[1] = PICTL[2] = PICTL[4] = L */ + corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE | PICTRL_COM_SIGNAL_OFF); + + /* Set Common Voltage */ + comadj = sharpsl_param.comadj; + if (comadj < 0) + comadj = DEFAULT_COMADJ; + lcdtg_set_common_voltage((POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF), comadj); + + /* VCC5 ON, DAC ON */ + corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON | + POWER0_COM_OFF | POWER0_VCC5_ON); + + /* GVSS(-8V) ON, VDD ON */ + corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON); + mdelay(2); + + /* COM SIGNAL ON (PICTL[3] = L) */ + corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE); + + /* COM ON, DAC ON, VCC5_ON */ + corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON + | POWER0_COM_ON | POWER0_VCC5_ON); + + /* VW ON, GVSS ON, VDD ON */ + corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_ON | POWER1_GVSS_ON | POWER1_VDD_ON); + + /* Signals output enable */ + corgi_ssp_lcdtg_send(PICTRL_ADRS, 0); + + /* Set Phase Adjuct */ + lcdtg_set_phadadj(par); + + /* Initialize for Input Signals from ATI */ + corgi_ssp_lcdtg_send(POLCTRL_ADRS, POLCTRL_SYNC_POL_RISE | POLCTRL_EN_POL_RISE + | POLCTRL_DATA_POL_RISE | POLCTRL_SYNC_ACT_L | POLCTRL_EN_ACT_H); + udelay(1000); + + lcd_inited=1; + } else { + lcdtg_set_phadadj(par); + } + + switch(par->xres) { + case 480: + case 640: + /* Set Lcd Resolution (VGA) */ + corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_VGA); + break; + case 240: + case 320: + default: + /* Set Lcd Resolution (QVGA) */ + corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_QVGA); + break; + } +} + +static void lcdtg_suspend(struct w100fb_par *par) +{ + /* 60Hz x 2 frame = 16.7msec x 2 = 33.4 msec */ + mdelay(34); + + /* (1)VW OFF */ + corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON); + + /* (2)COM OFF */ + corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_COM_SIGNAL_OFF); + corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON); + + /* (3)Set Common Voltage Bias 0V */ + lcdtg_set_common_voltage(POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON, 0); + + /* (4)GVSS OFF */ + corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON); + + /* (5)VCC5 OFF */ + corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF); + + /* (6)Set PDWN, INIOFF, DACOFF */ + corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIOFF | PICTRL_DAC_SIGNAL_OFF | + PICTRL_POWER_DOWN | PICTRL_COM_SIGNAL_OFF); + + /* (7)DAC OFF */ + corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_OFF | POWER0_COM_OFF | POWER0_VCC5_OFF); + + /* (8)VDD OFF */ + corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF); + + lcd_inited = 0; +} + +static struct w100_tg_info corgi_lcdtg_info = { + .change=lcdtg_hw_init, + .suspend=lcdtg_suspend, + .resume=lcdtg_hw_init, +}; + +/* + * Corgi w100 Frame Buffer Device + */ + +static struct w100_mem_info corgi_fb_mem = { + .ext_cntl = 0x00040003, + .sdram_mode_reg = 0x00650021, + .ext_timing_cntl = 0x10002a4a, + .io_cntl = 0x7ff87012, + .size = 0x1fffff, +}; + +static struct w100_gen_regs corgi_fb_regs = { + .lcd_format = 0x00000003, + .lcdd_cntl1 = 0x01CC0000, + .lcdd_cntl2 = 0x0003FFFF, + .genlcd_cntl1 = 0x00FFFF0D, + .genlcd_cntl2 = 0x003F3003, + .genlcd_cntl3 = 0x000102aa, +}; + +static struct w100_gpio_regs corgi_fb_gpio = { + .init_data1 = 0x000000bf, + .init_data2 = 0x00000000, + .gpio_dir1 = 0x00000000, + .gpio_oe1 = 0x03c0feff, + .gpio_dir2 = 0x00000000, + .gpio_oe2 = 0x00000000, +}; + +static struct w100_mode corgi_fb_modes[] = { +{ + .xres = 480, + .yres = 640, + .left_margin = 0x56, + .right_margin = 0x55, + .upper_margin = 0x03, + .lower_margin = 0x00, + .crtc_ss = 0x82360056, + .crtc_ls = 0xA0280000, + .crtc_gs = 0x80280028, + .crtc_vpos_gs = 0x02830002, + .crtc_rev = 0x00400008, + .crtc_dclk = 0xA0000000, + .crtc_gclk = 0x8015010F, + .crtc_goe = 0x80100110, + .crtc_ps1_active = 0x41060010, + .pll_freq = 75, + .fast_pll_freq = 100, + .sysclk_src = CLK_SRC_PLL, + .sysclk_divider = 0, + .pixclk_src = CLK_SRC_PLL, + .pixclk_divider = 2, + .pixclk_divider_rotated = 6, +},{ + .xres = 240, + .yres = 320, + .left_margin = 0x27, + .right_margin = 0x2e, + .upper_margin = 0x01, + .lower_margin = 0x00, + .crtc_ss = 0x81170027, + .crtc_ls = 0xA0140000, + .crtc_gs = 0xC0140014, + .crtc_vpos_gs = 0x00010141, + .crtc_rev = 0x00400008, + .crtc_dclk = 0xA0000000, + .crtc_gclk = 0x8015010F, + .crtc_goe = 0x80100110, + .crtc_ps1_active = 0x41060010, + .pll_freq = 0, + .fast_pll_freq = 0, + .sysclk_src = CLK_SRC_XTAL, + .sysclk_divider = 0, + .pixclk_src = CLK_SRC_XTAL, + .pixclk_divider = 1, + .pixclk_divider_rotated = 1, +}, + +}; + +static struct w100fb_mach_info corgi_fb_info = { + .tg = &corgi_lcdtg_info, + .init_mode = INIT_MODE_ROTATED, + .mem = &corgi_fb_mem, + .regs = &corgi_fb_regs, + .modelist = &corgi_fb_modes[0], + .num_modes = 2, + .gpio = &corgi_fb_gpio, + .xtal_freq = 12500000, + .xtal_dbl = 0, +}; + +static struct resource corgi_fb_resources[] = { + [0] = { + .start = 0x08000000, + .end = 0x08ffffff, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device corgifb_device = { + .name = "w100fb", + .id = -1, + .num_resources = ARRAY_SIZE(corgi_fb_resources), + .resource = corgi_fb_resources, + .dev = { + .platform_data = &corgi_fb_info, + .parent = &corgissp_device.dev, + }, + +}; diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index d4d03d0..06807c6 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -2,6 +2,13 @@ if ARCH_S3C2410 menu "S3C24XX Implementations" +config MACH_ANUBIS + bool "Simtec Electronics ANUBIS" + select CPU_S3C2440 + help + Say Y gere if you are using the Simtec Electronics ANUBIS + development system + config ARCH_BAST bool "Simtec Electronics BAST (EB2410ITX)" select CPU_S3C2410 @@ -11,6 +18,14 @@ config ARCH_BAST Product page: <http://www.simtec.co.uk/products/EB2410ITX/>. +config BAST_PC104_IRQ + bool "BAST PC104 IRQ support" + depends on ARCH_BAST + default y + help + Say Y here to enable the PC104 IRQ routing on the + Simtec BAST (EB2410ITX) + config ARCH_H1940 bool "IPAQ H1940" select CPU_S3C2410 diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile index 55ed7c7..b4f1e05 100644 --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile @@ -26,8 +26,13 @@ obj-$(CONFIG_CPU_S3C2440) += s3c2440.o s3c2440-dsc.o obj-$(CONFIG_CPU_S3C2440) += s3c2440-irq.o obj-$(CONFIG_CPU_S3C2440) += s3c2440-clock.o +# bast extras + +obj-$(CONFIG_BAST_PC104_IRQ) += bast-irq.o + # machine specific support +obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o obj-$(CONFIG_ARCH_BAST) += mach-bast.o usb-simtec.o obj-$(CONFIG_ARCH_H1940) += mach-h1940.o obj-$(CONFIG_MACH_N30) += mach-n30.o diff --git a/arch/arm/mach-s3c2410/bast-irq.c b/arch/arm/mach-s3c2410/bast-irq.c index 4991470..fbbeb05 100644 --- a/arch/arm/mach-s3c2410/bast-irq.c +++ b/arch/arm/mach-s3c2410/bast-irq.c @@ -1,6 +1,6 @@ /* linux/arch/arm/mach-s3c2410/bast-irq.c * - * Copyright (c) 2004 Simtec Electronics + * Copyright (c) 2003,2005 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * http://www.simtec.co.uk/products/EB2410ITX/ @@ -21,7 +21,8 @@ * * Modifications: * 08-Jan-2003 BJD Moved from central IRQ code - */ + * 21-Aug-2005 BJD Fixed missing code and compile errors +*/ #include <linux/init.h> @@ -30,12 +31,19 @@ #include <linux/ptrace.h> #include <linux/sysdev.h> +#include <asm/mach-types.h> + #include <asm/hardware.h> #include <asm/irq.h> #include <asm/io.h> #include <asm/mach/irq.h> -#include <asm/hardware/s3c2410/irq.h> + +#include <asm/arch/regs-irq.h> +#include <asm/arch/bast-map.h> +#include <asm/arch/bast-irq.h> + +#include "irq.h" #if 0 #include <asm/debug-ll.h> @@ -79,15 +87,15 @@ bast_pc104_mask(unsigned int irqno) temp = __raw_readb(BAST_VA_PC104_IRQMASK); temp &= ~bast_pc104_irqmasks[irqno]; __raw_writeb(temp, BAST_VA_PC104_IRQMASK); - - if (temp == 0) - bast_extint_mask(IRQ_ISA); } static void -bast_pc104_ack(unsigned int irqno) +bast_pc104_maskack(unsigned int irqno) { - bast_extint_ack(IRQ_ISA); + struct irqdesc *desc = irq_desc + IRQ_ISA; + + bast_pc104_mask(irqno); + desc->chip->ack(IRQ_ISA); } static void @@ -98,14 +106,12 @@ bast_pc104_unmask(unsigned int irqno) temp = __raw_readb(BAST_VA_PC104_IRQMASK); temp |= bast_pc104_irqmasks[irqno]; __raw_writeb(temp, BAST_VA_PC104_IRQMASK); - - bast_extint_unmask(IRQ_ISA); } -static struct bast_pc104_chip = { +static struct irqchip bast_pc104_chip = { .mask = bast_pc104_mask, .unmask = bast_pc104_unmask, - .ack = bast_pc104_ack + .ack = bast_pc104_maskack }; static void @@ -119,14 +125,49 @@ bast_irq_pc104_demux(unsigned int irq, stat = __raw_readb(BAST_VA_PC104_IRQREQ) & 0xf; - for (i = 0; i < 4 && stat != 0; i++) { - if (stat & 1) { - irqno = bast_pc104_irqs[i]; - desc = irq_desc + irqno; + if (unlikely(stat == 0)) { + /* ack if we get an irq with nothing (ie, startup) */ + + desc = irq_desc + IRQ_ISA; + desc->chip->ack(IRQ_ISA); + } else { + /* handle the IRQ */ + + for (i = 0; stat != 0; i++, stat >>= 1) { + if (stat & 1) { + irqno = bast_pc104_irqs[i]; - desc_handle_irq(irqno, desc, regs); + desc_handle_irq(irqno, irq_desc + irqno, regs); + } } + } +} - stat >>= 1; +static __init int bast_irq_init(void) +{ + unsigned int i; + + if (machine_is_bast()) { + printk(KERN_INFO "BAST PC104 IRQ routing, (c) 2005 Simtec Electronics\n"); + + /* zap all the IRQs */ + + __raw_writeb(0x0, BAST_VA_PC104_IRQMASK); + + set_irq_chained_handler(IRQ_ISA, bast_irq_pc104_demux); + + /* reigster our IRQs */ + + for (i = 0; i < 4; i++) { + unsigned int irqno = bast_pc104_irqs[i]; + + set_irq_chip(irqno, &bast_pc104_chip); + set_irq_handler(irqno, do_level_IRQ); + set_irq_flags(irqno, IRQF_VALID); + } } + + return 0; } + +arch_initcall(bast_irq_init); diff --git a/arch/arm/mach-s3c2410/mach-anubis.c b/arch/arm/mach-s3c2410/mach-anubis.c new file mode 100644 index 0000000..f87aa0b --- /dev/null +++ b/arch/arm/mach-s3c2410/mach-anubis.c @@ -0,0 +1,270 @@ +/* linux/arch/arm/mach-s3c2410/mach-anubis.c + * + * Copyright (c) 2003-2005 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Modifications: + * 02-May-2005 BJD Copied from mach-bast.c +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/device.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <asm/arch/anubis-map.h> +#include <asm/arch/anubis-irq.h> +#include <asm/arch/anubis-cpld.h> + +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/mach-types.h> + +#include <asm/arch/regs-serial.h> +#include <asm/arch/regs-gpio.h> +#include <asm/arch/regs-mem.h> +#include <asm/arch/regs-lcd.h> +#include <asm/arch/nand.h> + +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/nand_ecc.h> +#include <linux/mtd/partitions.h> + +#include "clock.h" +#include "devs.h" +#include "cpu.h" + +#define COPYRIGHT ", (c) 2005 Simtec Electronics" + +static struct map_desc anubis_iodesc[] __initdata = { + /* ISA IO areas */ + + { (u32)S3C24XX_VA_ISA_BYTE, 0x0, SZ_16M, MT_DEVICE }, + { (u32)S3C24XX_VA_ISA_WORD, 0x0, SZ_16M, MT_DEVICE }, + + /* we could possibly compress the next set down into a set of smaller tables + * pagetables, but that would mean using an L2 section, and it still means + * we cannot actually feed the same register to an LDR due to 16K spacing + */ + + /* CPLD control registers */ + + { (u32)ANUBIS_VA_CTRL1, ANUBIS_PA_CTRL1, SZ_4K, MT_DEVICE }, + { (u32)ANUBIS_VA_CTRL2, ANUBIS_PA_CTRL2, SZ_4K, MT_DEVICE }, + + /* IDE drives */ + + { (u32)ANUBIS_IDEPRI, S3C2410_CS3, SZ_1M, MT_DEVICE }, + { (u32)ANUBIS_IDEPRIAUX, S3C2410_CS3+(1<<26), SZ_1M, MT_DEVICE }, + + { (u32)ANUBIS_IDESEC, S3C2410_CS4, SZ_1M, MT_DEVICE }, + { (u32)ANUBIS_IDESECAUX, S3C2410_CS4+(1<<26), SZ_1M, MT_DEVICE }, +}; + +#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK +#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB +#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE + +static struct s3c24xx_uart_clksrc anubis_serial_clocks[] = { + [0] = { + .name = "uclk", + .divisor = 1, + .min_baud = 0, + .max_baud = 0, + }, + [1] = { + .name = "pclk", + .divisor = 1, + .min_baud = 0, + .max_baud = 0. + } +}; + + +static struct s3c2410_uartcfg anubis_uartcfgs[] = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + .clocks = anubis_serial_clocks, + .clocks_size = ARRAY_SIZE(anubis_serial_clocks) + }, + [1] = { + .hwport = 2, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + .clocks = anubis_serial_clocks, + .clocks_size = ARRAY_SIZE(anubis_serial_clocks) + }, +}; + +/* NAND Flash on Anubis board */ + +static int external_map[] = { 2 }; +static int chip0_map[] = { 0 }; +static int chip1_map[] = { 1 }; + +struct mtd_partition anubis_default_nand_part[] = { + [0] = { + .name = "Boot Agent", + .size = SZ_16K, + .offset = 0 + }, + [1] = { + .name = "/boot", + .size = SZ_4M - SZ_16K, + .offset = SZ_16K, + }, + [2] = { + .name = "user1", + .offset = SZ_4M, + .size = SZ_32M - SZ_4M, + }, + [3] = { + .name = "user2", + .offset = SZ_32M, + .size = MTDPART_SIZ_FULL, + } +}; + +/* the Anubis has 3 selectable slots for nand-flash, the two + * on-board chip areas, as well as the external slot. + * + * Note, there is no current hot-plug support for the External + * socket. +*/ + +static struct s3c2410_nand_set anubis_nand_sets[] = { + [1] = { + .name = "External", + .nr_chips = 1, + .nr_map = external_map, + .nr_partitions = ARRAY_SIZE(anubis_default_nand_part), + .partitions = anubis_default_nand_part + }, + [0] = { + .name = "chip0", + .nr_chips = 1, + .nr_map = chip0_map, + .nr_partitions = ARRAY_SIZE(anubis_default_nand_part), + .partitions = anubis_default_nand_part + }, + [2] = { + .name = "chip1", + .nr_chips = 1, + .nr_map = chip1_map, + .nr_partitions = ARRAY_SIZE(anubis_default_nand_part), + .partitions = anubis_default_nand_part + }, +}; + +static void anubis_nand_select(struct s3c2410_nand_set *set, int slot) +{ + unsigned int tmp; + + slot = set->nr_map[slot] & 3; + + pr_debug("anubis_nand: selecting slot %d (set %p,%p)\n", + slot, set, set->nr_map); + + tmp = __raw_readb(ANUBIS_VA_CTRL1); + tmp &= ~ANUBIS_CTRL1_NANDSEL; + tmp |= slot; + + pr_debug("anubis_nand: ctrl1 now %02x\n", tmp); + + __raw_writeb(tmp, ANUBIS_VA_CTRL1); +} + +static struct s3c2410_platform_nand anubis_nand_info = { + .tacls = 25, + .twrph0 = 80, + .twrph1 = 80, + .nr_sets = ARRAY_SIZE(anubis_nand_sets), + .sets = anubis_nand_sets, + .select_chip = anubis_nand_select, +}; + + +/* Standard Anubis devices */ + +static struct platform_device *anubis_devices[] __initdata = { + &s3c_device_usb, + &s3c_device_wdt, + &s3c_device_adc, + &s3c_device_i2c, + &s3c_device_rtc, + &s3c_device_nand, +}; + +static struct clk *anubis_clocks[] = { + &s3c24xx_dclk0, + &s3c24xx_dclk1, + &s3c24xx_clkout0, + &s3c24xx_clkout1, + &s3c24xx_uclk, +}; + +static struct s3c24xx_board anubis_board __initdata = { + .devices = anubis_devices, + .devices_count = ARRAY_SIZE(anubis_devices), + .clocks = anubis_clocks, + .clocks_count = ARRAY_SIZE(anubis_clocks) +}; + +void __init anubis_map_io(void) +{ + /* initialise the clocks */ + + s3c24xx_dclk0.parent = NULL; + s3c24xx_dclk0.rate = 12*1000*1000; + + s3c24xx_dclk1.parent = NULL; + s3c24xx_dclk1.rate = 24*1000*1000; + + s3c24xx_clkout0.parent = &s3c24xx_dclk0; + s3c24xx_clkout1.parent = &s3c24xx_dclk1; + + s3c24xx_uclk.parent = &s3c24xx_clkout1; + + s3c_device_nand.dev.platform_data = &anubis_nand_info; + + s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc)); + s3c24xx_init_clocks(0); + s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs)); + s3c24xx_set_board(&anubis_board); + + /* ensure that the GPIO is setup */ + s3c2410_gpio_setpin(S3C2410_GPA0, 1); +} + +MACHINE_START(ANUBIS, "Simtec-Anubis") + /* Maintainer: Ben Dooks <ben@simtec.co.uk> */ + .phys_ram = S3C2410_SDRAM_PA, + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, + .map_io = anubis_map_io, + .init_irq = s3c24xx_init_irq, + .timer = &s3c24xx_timer, +MACHINE_END diff --git a/arch/arm/mach-s3c2410/pm-simtec.c b/arch/arm/mach-s3c2410/pm-simtec.c index 2cb7988..4c7ccef 100644 --- a/arch/arm/mach-s3c2410/pm-simtec.c +++ b/arch/arm/mach-s3c2410/pm-simtec.c @@ -48,7 +48,7 @@ static __init int pm_simtec_init(void) /* check which machine we are running on */ - if (!machine_is_bast() && !machine_is_vr1000()) + if (!machine_is_bast() && !machine_is_vr1000() && !machine_is_anubis()) return 0; printk(KERN_INFO "Simtec Board Power Manangement" COPYRIGHT "\n"); diff --git a/arch/arm/mach-s3c2410/time.c b/arch/arm/mach-s3c2410/time.c index 765a3a9..c0acfb2 100644 --- a/arch/arm/mach-s3c2410/time.c +++ b/arch/arm/mach-s3c2410/time.c @@ -164,7 +164,7 @@ static void s3c2410_timer_setup (void) /* configure the system for whichever machine is in use */ - if (machine_is_bast() || machine_is_vr1000()) { + if (machine_is_bast() || machine_is_vr1000() || machine_is_anubis()) { /* timer is at 12MHz, scaler is 1 */ timer_usec_ticks = timer_mask_usec_ticks(1, 12000000); tcnt = 12000000 / HZ; diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index 3453658..9693e9b 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -91,6 +91,13 @@ config OMAP_32K_TIMER_HZ Kernel internal timer frequency should be a divisor of 32768, such as 64 or 128. +config OMAP_DM_TIMER + bool "Use dual-mode timer" + default n + depends on ARCH_OMAP16XX + help + Select this option if you want to use OMAP Dual-Mode timers. + choice prompt "Low-level debug console UART" depends on ARCH_OMAP @@ -107,6 +114,15 @@ config OMAP_LL_DEBUG_UART3 endchoice +config OMAP_SERIAL_WAKE + bool "Enable wake-up events for serial ports" + depends OMAP_MUX + default y + help + Select this option if you want to have your system wake up + to data on the serial RX line. This allows you to wake the + system from serial console. + endmenu endif diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index 531e11a..7e144f9 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := common.o dma.o clock.o mux.o gpio.o mcbsp.o usb.o +obj-y := common.o sram.o sram-fn.o clock.o dma.o mux.o gpio.o mcbsp.o usb.o obj-m := obj-n := obj- := @@ -15,3 +15,5 @@ obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o obj-$(CONFIG_PM) += pm.o sleep.o obj-$(CONFIG_CPU_FREQ) += cpu-omap.o +obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o + diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 59d91b3..52a58b2 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -21,6 +21,7 @@ #include <asm/arch/usb.h> #include "clock.h" +#include "sram.h" static LIST_HEAD(clocks); static DECLARE_MUTEX(clocks_sem); @@ -141,7 +142,7 @@ static struct clk arm_ck = { static struct clk armper_ck = { .name = "armper_ck", .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP730 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | RATE_CKCTL, .enable_reg = ARM_IDLECT2, .enable_bit = EN_PERCK, @@ -385,7 +386,8 @@ static struct clk uart2_ck = { .name = "uart2_ck", /* Direct from ULPD, no parent */ .rate = 12000000, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | ENABLE_REG_32BIT, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | ENABLE_REG_32BIT | + ALWAYS_ENABLED, .enable_reg = MOD_CONF_CTRL_0, .enable_bit = 30, /* Chooses between 12MHz and 48MHz */ .set_rate = &set_uart_rate, @@ -443,6 +445,15 @@ static struct clk usb_hhc_ck16xx = { .enable_bit = 8 /* UHOST_EN */, }; +static struct clk usb_dc_ck = { + .name = "usb_dc_ck", + /* Direct from ULPD, no parent */ + .rate = 48000000, + .flags = CLOCK_IN_OMAP16XX | RATE_FIXED, + .enable_reg = SOFT_REQ_REG, + .enable_bit = 4, +}; + static struct clk mclk_1510 = { .name = "mclk", /* Direct from ULPD, no parent. May be enabled by ext hardware. */ @@ -552,6 +563,7 @@ static struct clk * onchip_clks[] = { &uart3_16xx, &usb_clko, &usb_hhc_ck1510, &usb_hhc_ck16xx, + &usb_dc_ck, &mclk_1510, &mclk_16xx, &bclk_1510, &bclk_16xx, &mmc1_ck, @@ -946,14 +958,13 @@ static int select_table_rate(struct clk * clk, unsigned long rate) if (!ptr->rate) return -EINVAL; - if (!ptr->rate) - return -EINVAL; + /* + * In most cases we should not need to reprogram DPLL. + * Reprogramming the DPLL is tricky, it must be done from SRAM. + */ + omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val); - if (unlikely(ck_dpll1.rate == 0)) { - omap_writew(ptr->dpllctl_val, DPLL_CTL); - ck_dpll1.rate = ptr->pll_rate; - } - omap_writew(ptr->ckctl_val, ARM_CKCTL); + ck_dpll1.rate = ptr->pll_rate; propagate_rate(&ck_dpll1); return 0; } @@ -1224,9 +1235,11 @@ int __init clk_init(void) #endif /* Cache rates for clocks connected to ck_ref (not dpll1) */ propagate_rate(&ck_ref); - printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): %ld.%01ld/%ld/%ld MHz\n", + printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): " + "%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n", ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10, - ck_dpll1.rate, arm_ck.rate); + ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10, + arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10); #ifdef CONFIG_MACH_OMAP_PERSEUS2 /* Select slicer output as OMAP input clock */ @@ -1271,7 +1284,9 @@ static int __init omap_late_clk_reset(void) struct clk *p; __u32 regval32; - omap_writew(0, SOFT_REQ_REG); + /* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */ + regval32 = omap_readw(SOFT_REQ_REG) & (1 << 4); + omap_writew(regval32, SOFT_REQ_REG); omap_writew(0, SOFT_REQ_REG2); list_for_each_entry(p, &clocks, node) { diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index ea967a8..6cb20ae 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -26,6 +26,7 @@ #include <asm/hardware/clock.h> #include <asm/io.h> #include <asm/mach-types.h> +#include <asm/setup.h> #include <asm/arch/board.h> #include <asm/arch/mux.h> @@ -35,11 +36,11 @@ #define NO_LENGTH_CHECK 0xffffffff -extern int omap_bootloader_tag_len; -extern u8 omap_bootloader_tag[]; +unsigned char omap_bootloader_tag[512]; +int omap_bootloader_tag_len; struct omap_board_config_kernel *omap_board_config; -int omap_board_config_size = 0; +int omap_board_config_size; static const void *get_config(u16 tag, size_t len, int skip, size_t *len_out) { diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index c0a5c2f..da7b651 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -425,7 +425,7 @@ static int dma_handle_ch(int ch) dma_chan[ch + 6].saved_csr = csr >> 7; csr &= 0x7f; } - if (!csr) + if ((csr & 0x3f) == 0) return 0; if (unlikely(dma_chan[ch].dev_id == -1)) { printk(KERN_WARNING "Spurious interrupt from DMA channel %d (CSR %04x)\n", @@ -890,11 +890,11 @@ void omap_enable_lcd_dma(void) w |= 1 << 8; omap_writew(w, OMAP1610_DMA_LCD_CTRL); + lcd_dma.active = 1; + w = omap_readw(OMAP1610_DMA_LCD_CCR); w |= 1 << 7; omap_writew(w, OMAP1610_DMA_LCD_CCR); - - lcd_dma.active = 1; } void omap_setup_lcd_dma(void) @@ -965,8 +965,8 @@ void omap_clear_dma(int lch) */ dma_addr_t omap_get_dma_src_pos(int lch) { - return (dma_addr_t) (OMAP_DMA_CSSA_L(lch) | - (OMAP_DMA_CSSA_U(lch) << 16)); + return (dma_addr_t) (omap_readw(OMAP_DMA_CSSA_L(lch)) | + (omap_readw(OMAP_DMA_CSSA_U(lch)) << 16)); } /* @@ -979,8 +979,18 @@ dma_addr_t omap_get_dma_src_pos(int lch) */ dma_addr_t omap_get_dma_dst_pos(int lch) { - return (dma_addr_t) (OMAP_DMA_CDSA_L(lch) | - (OMAP_DMA_CDSA_U(lch) << 16)); + return (dma_addr_t) (omap_readw(OMAP_DMA_CDSA_L(lch)) | + (omap_readw(OMAP_DMA_CDSA_U(lch)) << 16)); +} + +/* + * Returns current source transfer counting for the given DMA channel. + * Can be used to monitor the progress of a transfer inside a block. + * It must be called with disabled interrupts. + */ +int omap_get_dma_src_addr_counter(int lch) +{ + return (dma_addr_t) omap_readw(OMAP_DMA_CSAC(lch)); } int omap_dma_running(void) @@ -1076,6 +1086,7 @@ arch_initcall(omap_init_dma); EXPORT_SYMBOL(omap_get_dma_src_pos); EXPORT_SYMBOL(omap_get_dma_dst_pos); +EXPORT_SYMBOL(omap_get_dma_src_addr_counter); EXPORT_SYMBOL(omap_clear_dma); EXPORT_SYMBOL(omap_set_dma_priority); EXPORT_SYMBOL(omap_request_dma); diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c new file mode 100644 index 0000000..a1468d7 --- /dev/null +++ b/arch/arm/plat-omap/dmtimer.c @@ -0,0 +1,260 @@ +/* + * linux/arch/arm/plat-omap/dmtimer.c + * + * OMAP Dual-Mode Timers + * + * Copyright (C) 2005 Nokia Corporation + * Author: Lauri Leukkunen <lauri.leukkunen@nokia.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <asm/arch/hardware.h> +#include <asm/arch/dmtimer.h> +#include <asm/io.h> +#include <asm/arch/irqs.h> +#include <linux/spinlock.h> +#include <linux/list.h> + +#define OMAP_TIMER_COUNT 8 + +#define OMAP_TIMER_ID_REG 0x00 +#define OMAP_TIMER_OCP_CFG_REG 0x10 +#define OMAP_TIMER_SYS_STAT_REG 0x14 +#define OMAP_TIMER_STAT_REG 0x18 +#define OMAP_TIMER_INT_EN_REG 0x1c +#define OMAP_TIMER_WAKEUP_EN_REG 0x20 +#define OMAP_TIMER_CTRL_REG 0x24 +#define OMAP_TIMER_COUNTER_REG 0x28 +#define OMAP_TIMER_LOAD_REG 0x2c +#define OMAP_TIMER_TRIGGER_REG 0x30 +#define OMAP_TIMER_WRITE_PEND_REG 0x34 +#define OMAP_TIMER_MATCH_REG 0x38 +#define OMAP_TIMER_CAPTURE_REG 0x3c +#define OMAP_TIMER_IF_CTRL_REG 0x40 + + +static struct dmtimer_info_struct { + struct list_head unused_timers; + struct list_head reserved_timers; +} dm_timer_info; + +static struct omap_dm_timer dm_timers[] = { + { .base=0xfffb1400, .irq=INT_1610_GPTIMER1 }, + { .base=0xfffb1c00, .irq=INT_1610_GPTIMER2 }, + { .base=0xfffb2400, .irq=INT_1610_GPTIMER3 }, + { .base=0xfffb2c00, .irq=INT_1610_GPTIMER4 }, + { .base=0xfffb3400, .irq=INT_1610_GPTIMER5 }, + { .base=0xfffb3c00, .irq=INT_1610_GPTIMER6 }, + { .base=0xfffb4400, .irq=INT_1610_GPTIMER7 }, + { .base=0xfffb4c00, .irq=INT_1610_GPTIMER8 }, + { .base=0x0 }, +}; + + +static spinlock_t dm_timer_lock; + + +inline void omap_dm_timer_write_reg(struct omap_dm_timer *timer, int reg, u32 value) +{ + omap_writel(value, timer->base + reg); + while (omap_dm_timer_read_reg(timer, OMAP_TIMER_WRITE_PEND_REG)) + ; +} + +u32 omap_dm_timer_read_reg(struct omap_dm_timer *timer, int reg) +{ + return omap_readl(timer->base + reg); +} + +int omap_dm_timers_active(void) +{ + struct omap_dm_timer *timer; + + for (timer = &dm_timers[0]; timer->base; ++timer) + if (omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG) & + OMAP_TIMER_CTRL_ST) + return 1; + + return 0; +} + + +void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) +{ + int n = (timer - dm_timers) << 1; + u32 l; + + l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n); + l |= source << n; + omap_writel(l, MOD_CONF_CTRL_1); +} + + +static void omap_dm_timer_reset(struct omap_dm_timer *timer) +{ + /* Reset and set posted mode */ + omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0x06); + omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_REG, 0x02); + + omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_ARMXOR); +} + + + +struct omap_dm_timer * omap_dm_timer_request(void) +{ + struct omap_dm_timer *timer = NULL; + unsigned long flags; + + spin_lock_irqsave(&dm_timer_lock, flags); + if (!list_empty(&dm_timer_info.unused_timers)) { + timer = (struct omap_dm_timer *) + dm_timer_info.unused_timers.next; + list_move_tail((struct list_head *)timer, + &dm_timer_info.reserved_timers); + } + spin_unlock_irqrestore(&dm_timer_lock, flags); + + return timer; +} + + +void omap_dm_timer_free(struct omap_dm_timer *timer) +{ + unsigned long flags; + + omap_dm_timer_reset(timer); + + spin_lock_irqsave(&dm_timer_lock, flags); + list_move_tail((struct list_head *)timer, &dm_timer_info.unused_timers); + spin_unlock_irqrestore(&dm_timer_lock, flags); +} + +void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, + unsigned int value) +{ + omap_dm_timer_write_reg(timer, OMAP_TIMER_INT_EN_REG, value); +} + +unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer) +{ + return omap_dm_timer_read_reg(timer, OMAP_TIMER_STAT_REG); +} + +void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value) +{ + omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG, value); +} + +void omap_dm_timer_enable_autoreload(struct omap_dm_timer *timer) +{ + u32 l; + l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG); + l |= OMAP_TIMER_CTRL_AR; + omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l); +} + +void omap_dm_timer_trigger(struct omap_dm_timer *timer) +{ + omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 1); +} + +void omap_dm_timer_set_trigger(struct omap_dm_timer *timer, unsigned int value) +{ + u32 l; + + l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG); + l |= value & 0x3; + omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l); +} + +void omap_dm_timer_start(struct omap_dm_timer *timer) +{ + u32 l; + + l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG); + l |= OMAP_TIMER_CTRL_ST; + omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l); +} + +void omap_dm_timer_stop(struct omap_dm_timer *timer) +{ + u32 l; + + l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG); + l &= ~0x1; + omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l); +} + +unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer) +{ + return omap_dm_timer_read_reg(timer, OMAP_TIMER_COUNTER_REG); +} + +void omap_dm_timer_reset_counter(struct omap_dm_timer *timer) +{ + omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, 0); +} + +void omap_dm_timer_set_load(struct omap_dm_timer *timer, unsigned int load) +{ + omap_dm_timer_write_reg(timer, OMAP_TIMER_LOAD_REG, load); +} + +void omap_dm_timer_set_match(struct omap_dm_timer *timer, unsigned int match) +{ + omap_dm_timer_write_reg(timer, OMAP_TIMER_MATCH_REG, match); +} + +void omap_dm_timer_enable_compare(struct omap_dm_timer *timer) +{ + u32 l; + + l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG); + l |= OMAP_TIMER_CTRL_CE; + omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l); +} + + +static inline void __dm_timer_init(void) +{ + struct omap_dm_timer *timer; + + spin_lock_init(&dm_timer_lock); + INIT_LIST_HEAD(&dm_timer_info.unused_timers); + INIT_LIST_HEAD(&dm_timer_info.reserved_timers); + + timer = &dm_timers[0]; + while (timer->base) { + list_add_tail((struct list_head *)timer, &dm_timer_info.unused_timers); + omap_dm_timer_reset(timer); + timer++; + } +} + +static int __init omap_dm_timer_init(void) +{ + if (cpu_is_omap16xx()) + __dm_timer_init(); + return 0; +} + +arch_initcall(omap_dm_timer_init); diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index aa481ea..55059a2 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -3,7 +3,7 @@ * * Support functions for OMAP GPIO * - * Copyright (C) 2003 Nokia Corporation + * Copyright (C) 2003-2005 Nokia Corporation * Written by Juha Yrjölä <juha.yrjola@nokia.com> * * This program is free software; you can redistribute it and/or modify @@ -17,8 +17,11 @@ #include <linux/sched.h> #include <linux/interrupt.h> #include <linux/ptrace.h> +#include <linux/sysdev.h> +#include <linux/err.h> #include <asm/hardware.h> +#include <asm/hardware/clock.h> #include <asm/irq.h> #include <asm/arch/irqs.h> #include <asm/arch/gpio.h> @@ -29,7 +32,7 @@ /* * OMAP1510 GPIO registers */ -#define OMAP1510_GPIO_BASE 0xfffce000 +#define OMAP1510_GPIO_BASE (void __iomem *)0xfffce000 #define OMAP1510_GPIO_DATA_INPUT 0x00 #define OMAP1510_GPIO_DATA_OUTPUT 0x04 #define OMAP1510_GPIO_DIR_CONTROL 0x08 @@ -43,34 +46,37 @@ /* * OMAP1610 specific GPIO registers */ -#define OMAP1610_GPIO1_BASE 0xfffbe400 -#define OMAP1610_GPIO2_BASE 0xfffbec00 -#define OMAP1610_GPIO3_BASE 0xfffbb400 -#define OMAP1610_GPIO4_BASE 0xfffbbc00 +#define OMAP1610_GPIO1_BASE (void __iomem *)0xfffbe400 +#define OMAP1610_GPIO2_BASE (void __iomem *)0xfffbec00 +#define OMAP1610_GPIO3_BASE (void __iomem *)0xfffbb400 +#define OMAP1610_GPIO4_BASE (void __iomem *)0xfffbbc00 #define OMAP1610_GPIO_REVISION 0x0000 #define OMAP1610_GPIO_SYSCONFIG 0x0010 #define OMAP1610_GPIO_SYSSTATUS 0x0014 #define OMAP1610_GPIO_IRQSTATUS1 0x0018 #define OMAP1610_GPIO_IRQENABLE1 0x001c +#define OMAP1610_GPIO_WAKEUPENABLE 0x0028 #define OMAP1610_GPIO_DATAIN 0x002c #define OMAP1610_GPIO_DATAOUT 0x0030 #define OMAP1610_GPIO_DIRECTION 0x0034 #define OMAP1610_GPIO_EDGE_CTRL1 0x0038 #define OMAP1610_GPIO_EDGE_CTRL2 0x003c #define OMAP1610_GPIO_CLEAR_IRQENABLE1 0x009c +#define OMAP1610_GPIO_CLEAR_WAKEUPENA 0x00a8 #define OMAP1610_GPIO_CLEAR_DATAOUT 0x00b0 #define OMAP1610_GPIO_SET_IRQENABLE1 0x00dc +#define OMAP1610_GPIO_SET_WAKEUPENA 0x00e8 #define OMAP1610_GPIO_SET_DATAOUT 0x00f0 /* * OMAP730 specific GPIO registers */ -#define OMAP730_GPIO1_BASE 0xfffbc000 -#define OMAP730_GPIO2_BASE 0xfffbc800 -#define OMAP730_GPIO3_BASE 0xfffbd000 -#define OMAP730_GPIO4_BASE 0xfffbd800 -#define OMAP730_GPIO5_BASE 0xfffbe000 -#define OMAP730_GPIO6_BASE 0xfffbe800 +#define OMAP730_GPIO1_BASE (void __iomem *)0xfffbc000 +#define OMAP730_GPIO2_BASE (void __iomem *)0xfffbc800 +#define OMAP730_GPIO3_BASE (void __iomem *)0xfffbd000 +#define OMAP730_GPIO4_BASE (void __iomem *)0xfffbd800 +#define OMAP730_GPIO5_BASE (void __iomem *)0xfffbe000 +#define OMAP730_GPIO6_BASE (void __iomem *)0xfffbe800 #define OMAP730_GPIO_DATA_INPUT 0x00 #define OMAP730_GPIO_DATA_OUTPUT 0x04 #define OMAP730_GPIO_DIR_CONTROL 0x08 @@ -78,14 +84,43 @@ #define OMAP730_GPIO_INT_MASK 0x10 #define OMAP730_GPIO_INT_STATUS 0x14 +/* + * omap24xx specific GPIO registers + */ +#define OMAP24XX_GPIO1_BASE (void __iomem *)0x48018000 +#define OMAP24XX_GPIO2_BASE (void __iomem *)0x4801a000 +#define OMAP24XX_GPIO3_BASE (void __iomem *)0x4801c000 +#define OMAP24XX_GPIO4_BASE (void __iomem *)0x4801e000 +#define OMAP24XX_GPIO_REVISION 0x0000 +#define OMAP24XX_GPIO_SYSCONFIG 0x0010 +#define OMAP24XX_GPIO_SYSSTATUS 0x0014 +#define OMAP24XX_GPIO_IRQSTATUS1 0x0018 +#define OMAP24XX_GPIO_IRQENABLE1 0x001c +#define OMAP24XX_GPIO_CTRL 0x0030 +#define OMAP24XX_GPIO_OE 0x0034 +#define OMAP24XX_GPIO_DATAIN 0x0038 +#define OMAP24XX_GPIO_DATAOUT 0x003c +#define OMAP24XX_GPIO_LEVELDETECT0 0x0040 +#define OMAP24XX_GPIO_LEVELDETECT1 0x0044 +#define OMAP24XX_GPIO_RISINGDETECT 0x0048 +#define OMAP24XX_GPIO_FALLINGDETECT 0x004c +#define OMAP24XX_GPIO_CLEARIRQENABLE1 0x0060 +#define OMAP24XX_GPIO_SETIRQENABLE1 0x0064 +#define OMAP24XX_GPIO_CLEARWKUENA 0x0080 +#define OMAP24XX_GPIO_SETWKUENA 0x0084 +#define OMAP24XX_GPIO_CLEARDATAOUT 0x0090 +#define OMAP24XX_GPIO_SETDATAOUT 0x0094 + #define OMAP_MPUIO_MASK (~OMAP_MAX_GPIO_LINES & 0xff) struct gpio_bank { - u32 base; + void __iomem *base; u16 irq; u16 virtual_irq_start; - u8 method; + int method; u32 reserved_map; + u32 suspend_wakeup; + u32 saved_wakeup; spinlock_t lock; }; @@ -93,8 +128,9 @@ struct gpio_bank { #define METHOD_GPIO_1510 1 #define METHOD_GPIO_1610 2 #define METHOD_GPIO_730 3 +#define METHOD_GPIO_24XX 4 -#if defined(CONFIG_ARCH_OMAP16XX) +#ifdef CONFIG_ARCH_OMAP16XX static struct gpio_bank gpio_bank_1610[5] = { { OMAP_MPUIO_BASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO}, { OMAP1610_GPIO1_BASE, INT_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_1610 }, @@ -123,6 +159,15 @@ static struct gpio_bank gpio_bank_730[7] = { }; #endif +#ifdef CONFIG_ARCH_OMAP24XX +static struct gpio_bank gpio_bank_24xx[4] = { + { OMAP24XX_GPIO1_BASE, INT_24XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_24XX }, + { OMAP24XX_GPIO2_BASE, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_24XX }, + { OMAP24XX_GPIO3_BASE, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_24XX }, + { OMAP24XX_GPIO4_BASE, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_24XX }, +}; +#endif + static struct gpio_bank *gpio_bank; static int gpio_bank_count; @@ -149,14 +194,23 @@ static inline struct gpio_bank *get_gpio_bank(int gpio) return &gpio_bank[1 + (gpio >> 5)]; } #endif +#ifdef CONFIG_ARCH_OMAP24XX + if (cpu_is_omap24xx()) + return &gpio_bank[gpio >> 5]; +#endif } static inline int get_gpio_index(int gpio) { +#ifdef CONFIG_ARCH_OMAP730 if (cpu_is_omap730()) return gpio & 0x1f; - else - return gpio & 0x0f; +#endif +#ifdef CONFIG_ARCH_OMAP24XX + if (cpu_is_omap24xx()) + return gpio & 0x1f; +#endif + return gpio & 0x0f; } static inline int gpio_valid(int gpio) @@ -180,6 +234,10 @@ static inline int gpio_valid(int gpio) if (cpu_is_omap730() && gpio < 192) return 0; #endif +#ifdef CONFIG_ARCH_OMAP24XX + if (cpu_is_omap24xx() && gpio < 128) + return 0; +#endif return -1; } @@ -195,7 +253,7 @@ static int check_gpio(int gpio) static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input) { - u32 reg = bank->base; + void __iomem *reg = bank->base; u32 l; switch (bank->method) { @@ -211,6 +269,9 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input) case METHOD_GPIO_730: reg += OMAP730_GPIO_DIR_CONTROL; break; + case METHOD_GPIO_24XX: + reg += OMAP24XX_GPIO_OE; + break; } l = __raw_readl(reg); if (is_input) @@ -234,7 +295,7 @@ void omap_set_gpio_direction(int gpio, int is_input) static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) { - u32 reg = bank->base; + void __iomem *reg = bank->base; u32 l = 0; switch (bank->method) { @@ -269,6 +330,13 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) else l &= ~(1 << gpio); break; + case METHOD_GPIO_24XX: + if (enable) + reg += OMAP24XX_GPIO_SETDATAOUT; + else + reg += OMAP24XX_GPIO_CLEARDATAOUT; + l = 1 << gpio; + break; default: BUG(); return; @@ -291,7 +359,7 @@ void omap_set_gpio_dataout(int gpio, int enable) int omap_get_gpio_datain(int gpio) { struct gpio_bank *bank; - u32 reg; + void __iomem *reg; if (check_gpio(gpio) < 0) return -1; @@ -310,109 +378,132 @@ int omap_get_gpio_datain(int gpio) case METHOD_GPIO_730: reg += OMAP730_GPIO_DATA_INPUT; break; + case METHOD_GPIO_24XX: + reg += OMAP24XX_GPIO_DATAIN; + break; default: BUG(); return -1; } - return (__raw_readl(reg) & (1 << get_gpio_index(gpio))) != 0; + return (__raw_readl(reg) + & (1 << get_gpio_index(gpio))) != 0; } -static void _set_gpio_edge_ctrl(struct gpio_bank *bank, int gpio, int edge) +#define MOD_REG_BIT(reg, bit_mask, set) \ +do { \ + int l = __raw_readl(base + reg); \ + if (set) l |= bit_mask; \ + else l &= ~bit_mask; \ + __raw_writel(l, base + reg); \ +} while(0) + +static inline void set_24xx_gpio_triggering(void __iomem *base, int gpio, int trigger) { - u32 reg = bank->base; - u32 l; + u32 gpio_bit = 1 << gpio; + + MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit, + trigger & IRQT_LOW); + MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit, + trigger & IRQT_HIGH); + MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit, + trigger & IRQT_RISING); + MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit, + trigger & IRQT_FALLING); + /* FIXME: Possibly do 'set_irq_handler(j, do_level_IRQ)' if only level + * triggering requested. */ +} + +static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) +{ + void __iomem *reg = bank->base; + u32 l = 0; switch (bank->method) { case METHOD_MPUIO: reg += OMAP_MPUIO_GPIO_INT_EDGE; l = __raw_readl(reg); - if (edge == OMAP_GPIO_RISING_EDGE) + if (trigger == IRQT_RISING) l |= 1 << gpio; - else + else if (trigger == IRQT_FALLING) l &= ~(1 << gpio); - __raw_writel(l, reg); + else + goto bad; break; case METHOD_GPIO_1510: reg += OMAP1510_GPIO_INT_CONTROL; l = __raw_readl(reg); - if (edge == OMAP_GPIO_RISING_EDGE) + if (trigger == IRQT_RISING) l |= 1 << gpio; - else + else if (trigger == IRQT_FALLING) l &= ~(1 << gpio); - __raw_writel(l, reg); + else + goto bad; break; case METHOD_GPIO_1610: - edge &= 0x03; if (gpio & 0x08) reg += OMAP1610_GPIO_EDGE_CTRL2; else reg += OMAP1610_GPIO_EDGE_CTRL1; gpio &= 0x07; + /* We allow only edge triggering, i.e. two lowest bits */ + if (trigger & ~IRQT_BOTHEDGE) + BUG(); + /* NOTE: knows __IRQT_{FAL,RIS}EDGE match OMAP hardware */ + trigger &= 0x03; l = __raw_readl(reg); l &= ~(3 << (gpio << 1)); - l |= edge << (gpio << 1); - __raw_writel(l, reg); + l |= trigger << (gpio << 1); break; case METHOD_GPIO_730: reg += OMAP730_GPIO_INT_CONTROL; l = __raw_readl(reg); - if (edge == OMAP_GPIO_RISING_EDGE) + if (trigger == IRQT_RISING) l |= 1 << gpio; - else + else if (trigger == IRQT_FALLING) l &= ~(1 << gpio); - __raw_writel(l, reg); + else + goto bad; + break; + case METHOD_GPIO_24XX: + set_24xx_gpio_triggering(reg, gpio, trigger); break; default: BUG(); - return; + goto bad; } + __raw_writel(l, reg); + return 0; +bad: + return -EINVAL; } -void omap_set_gpio_edge_ctrl(int gpio, int edge) +static int gpio_irq_type(unsigned irq, unsigned type) { struct gpio_bank *bank; + unsigned gpio; + int retval; + + if (irq > IH_MPUIO_BASE) + gpio = OMAP_MPUIO(irq - IH_MPUIO_BASE); + else + gpio = irq - IH_GPIO_BASE; if (check_gpio(gpio) < 0) - return; + return -EINVAL; + + if (type & (__IRQT_LOWLVL|__IRQT_HIGHLVL|IRQT_PROBE)) + return -EINVAL; + bank = get_gpio_bank(gpio); spin_lock(&bank->lock); - _set_gpio_edge_ctrl(bank, get_gpio_index(gpio), edge); + retval = _set_gpio_triggering(bank, get_gpio_index(gpio), type); spin_unlock(&bank->lock); -} - - -static int _get_gpio_edge_ctrl(struct gpio_bank *bank, int gpio) -{ - u32 reg = bank->base, l; - - switch (bank->method) { - case METHOD_MPUIO: - l = __raw_readl(reg + OMAP_MPUIO_GPIO_INT_EDGE); - return (l & (1 << gpio)) ? - OMAP_GPIO_RISING_EDGE : OMAP_GPIO_FALLING_EDGE; - case METHOD_GPIO_1510: - l = __raw_readl(reg + OMAP1510_GPIO_INT_CONTROL); - return (l & (1 << gpio)) ? - OMAP_GPIO_RISING_EDGE : OMAP_GPIO_FALLING_EDGE; - case METHOD_GPIO_1610: - if (gpio & 0x08) - reg += OMAP1610_GPIO_EDGE_CTRL2; - else - reg += OMAP1610_GPIO_EDGE_CTRL1; - return (__raw_readl(reg) >> ((gpio & 0x07) << 1)) & 0x03; - case METHOD_GPIO_730: - l = __raw_readl(reg + OMAP730_GPIO_INT_CONTROL); - return (l & (1 << gpio)) ? - OMAP_GPIO_RISING_EDGE : OMAP_GPIO_FALLING_EDGE; - default: - BUG(); - return -1; - } + return retval; } static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) { - u32 reg = bank->base; + void __iomem *reg = bank->base; switch (bank->method) { case METHOD_MPUIO: @@ -428,6 +519,9 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) case METHOD_GPIO_730: reg += OMAP730_GPIO_INT_STATUS; break; + case METHOD_GPIO_24XX: + reg += OMAP24XX_GPIO_IRQSTATUS1; + break; default: BUG(); return; @@ -442,7 +536,7 @@ static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio) static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enable) { - u32 reg = bank->base; + void __iomem *reg = bank->base; u32 l; switch (bank->method) { @@ -477,6 +571,13 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab else l |= gpio_mask; break; + case METHOD_GPIO_24XX: + if (enable) + reg += OMAP24XX_GPIO_SETIRQENABLE1; + else + reg += OMAP24XX_GPIO_CLEARIRQENABLE1; + l = gpio_mask; + break; default: BUG(); return; @@ -489,6 +590,50 @@ static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int ena _enable_gpio_irqbank(bank, 1 << get_gpio_index(gpio), enable); } +/* + * Note that ENAWAKEUP needs to be enabled in GPIO_SYSCONFIG register. + * 1510 does not seem to have a wake-up register. If JTAG is connected + * to the target, system will wake up always on GPIO events. While + * system is running all registered GPIO interrupts need to have wake-up + * enabled. When system is suspended, only selected GPIO interrupts need + * to have wake-up enabled. + */ +static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable) +{ + switch (bank->method) { + case METHOD_GPIO_1610: + case METHOD_GPIO_24XX: + spin_lock(&bank->lock); + if (enable) + bank->suspend_wakeup |= (1 << gpio); + else + bank->suspend_wakeup &= ~(1 << gpio); + spin_unlock(&bank->lock); + return 0; + default: + printk(KERN_ERR "Can't enable GPIO wakeup for method %i\n", + bank->method); + return -EINVAL; + } +} + +/* Use disable_irq_wake() and enable_irq_wake() functions from drivers */ +static int gpio_wake_enable(unsigned int irq, unsigned int enable) +{ + unsigned int gpio = irq - IH_GPIO_BASE; + struct gpio_bank *bank; + int retval; + + if (check_gpio(gpio) < 0) + return -ENODEV; + bank = get_gpio_bank(gpio); + spin_lock(&bank->lock); + retval = _set_gpio_wakeup(bank, get_gpio_index(gpio), enable); + spin_unlock(&bank->lock); + + return retval; +} + int omap_request_gpio(int gpio) { struct gpio_bank *bank; @@ -505,15 +650,33 @@ int omap_request_gpio(int gpio) return -1; } bank->reserved_map |= (1 << get_gpio_index(gpio)); + + /* Set trigger to none. You need to enable the trigger after request_irq */ + _set_gpio_triggering(bank, get_gpio_index(gpio), IRQT_NOEDGE); + #ifdef CONFIG_ARCH_OMAP1510 if (bank->method == METHOD_GPIO_1510) { - u32 reg; + void __iomem *reg; - /* Claim the pin for the ARM */ + /* Claim the pin for MPU */ reg = bank->base + OMAP1510_GPIO_PIN_CONTROL; __raw_writel(__raw_readl(reg) | (1 << get_gpio_index(gpio)), reg); } #endif +#ifdef CONFIG_ARCH_OMAP16XX + if (bank->method == METHOD_GPIO_1610) { + /* Enable wake-up during idle for dynamic tick */ + void __iomem *reg = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; + __raw_writel(1 << get_gpio_index(gpio), reg); + } +#endif +#ifdef CONFIG_ARCH_OMAP24XX + if (bank->method == METHOD_GPIO_24XX) { + /* Enable wake-up during idle for dynamic tick */ + void __iomem *reg = bank->base + OMAP24XX_GPIO_SETWKUENA; + __raw_writel(1 << get_gpio_index(gpio), reg); + } +#endif spin_unlock(&bank->lock); return 0; @@ -533,6 +696,20 @@ void omap_free_gpio(int gpio) spin_unlock(&bank->lock); return; } +#ifdef CONFIG_ARCH_OMAP16XX + if (bank->method == METHOD_GPIO_1610) { + /* Disable wake-up during idle for dynamic tick */ + void __iomem *reg = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA; + __raw_writel(1 << get_gpio_index(gpio), reg); + } +#endif +#ifdef CONFIG_ARCH_OMAP24XX + if (bank->method == METHOD_GPIO_24XX) { + /* Disable wake-up during idle for dynamic tick */ + void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA; + __raw_writel(1 << get_gpio_index(gpio), reg); + } +#endif bank->reserved_map &= ~(1 << get_gpio_index(gpio)); _set_gpio_direction(bank, get_gpio_index(gpio), 1); _set_gpio_irqenable(bank, gpio, 0); @@ -552,7 +729,7 @@ void omap_free_gpio(int gpio) static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs) { - u32 isr_reg = 0; + void __iomem *isr_reg = NULL; u32 isr; unsigned int gpio_irq; struct gpio_bank *bank; @@ -574,24 +751,30 @@ static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc, if (bank->method == METHOD_GPIO_730) isr_reg = bank->base + OMAP730_GPIO_INT_STATUS; #endif +#ifdef CONFIG_ARCH_OMAP24XX + if (bank->method == METHOD_GPIO_24XX) + isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1; +#endif - isr = __raw_readl(isr_reg); - _enable_gpio_irqbank(bank, isr, 0); - _clear_gpio_irqbank(bank, isr); - _enable_gpio_irqbank(bank, isr, 1); - desc->chip->unmask(irq); - - if (unlikely(!isr)) - return; - - gpio_irq = bank->virtual_irq_start; - for (; isr != 0; isr >>= 1, gpio_irq++) { - struct irqdesc *d; - if (!(isr & 1)) - continue; - d = irq_desc + gpio_irq; - desc_handle_irq(gpio_irq, d, regs); - } + while(1) { + isr = __raw_readl(isr_reg); + _enable_gpio_irqbank(bank, isr, 0); + _clear_gpio_irqbank(bank, isr); + _enable_gpio_irqbank(bank, isr, 1); + desc->chip->unmask(irq); + + if (!isr) + break; + + gpio_irq = bank->virtual_irq_start; + for (; isr != 0; isr >>= 1, gpio_irq++) { + struct irqdesc *d; + if (!(isr & 1)) + continue; + d = irq_desc + gpio_irq; + desc_handle_irq(gpio_irq, d, regs); + } + } } static void gpio_ack_irq(unsigned int irq) @@ -613,14 +796,10 @@ static void gpio_mask_irq(unsigned int irq) static void gpio_unmask_irq(unsigned int irq) { unsigned int gpio = irq - IH_GPIO_BASE; + unsigned int gpio_idx = get_gpio_index(gpio); struct gpio_bank *bank = get_gpio_bank(gpio); - if (_get_gpio_edge_ctrl(bank, get_gpio_index(gpio)) == OMAP_GPIO_NO_EDGE) { - printk(KERN_ERR "OMAP GPIO %d: trying to enable GPIO IRQ while no edge is set\n", - gpio); - _set_gpio_edge_ctrl(bank, get_gpio_index(gpio), OMAP_GPIO_RISING_EDGE); - } - _set_gpio_irqenable(bank, gpio, 1); + _set_gpio_irqenable(bank, gpio_idx, 1); } static void mpuio_ack_irq(unsigned int irq) @@ -645,9 +824,11 @@ static void mpuio_unmask_irq(unsigned int irq) } static struct irqchip gpio_irq_chip = { - .ack = gpio_ack_irq, - .mask = gpio_mask_irq, - .unmask = gpio_unmask_irq, + .ack = gpio_ack_irq, + .mask = gpio_mask_irq, + .unmask = gpio_unmask_irq, + .set_type = gpio_irq_type, + .set_wake = gpio_wake_enable, }; static struct irqchip mpuio_irq_chip = { @@ -657,6 +838,7 @@ static struct irqchip mpuio_irq_chip = { }; static int initialized = 0; +static struct clk * gpio_ck = NULL; static int __init _omap_gpio_init(void) { @@ -665,6 +847,14 @@ static int __init _omap_gpio_init(void) initialized = 1; + if (cpu_is_omap1510()) { + gpio_ck = clk_get(NULL, "arm_gpio_ck"); + if (IS_ERR(gpio_ck)) + printk("Could not get arm_gpio_ck\n"); + else + clk_use(gpio_ck); + } + #ifdef CONFIG_ARCH_OMAP1510 if (cpu_is_omap1510()) { printk(KERN_INFO "OMAP1510 GPIO hardware\n"); @@ -674,7 +864,7 @@ static int __init _omap_gpio_init(void) #endif #if defined(CONFIG_ARCH_OMAP16XX) if (cpu_is_omap16xx()) { - int rev; + u32 rev; gpio_bank_count = 5; gpio_bank = gpio_bank_1610; @@ -690,6 +880,17 @@ static int __init _omap_gpio_init(void) gpio_bank = gpio_bank_730; } #endif +#ifdef CONFIG_ARCH_OMAP24XX + if (cpu_is_omap24xx()) { + int rev; + + gpio_bank_count = 4; + gpio_bank = gpio_bank_24xx; + rev = omap_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); + printk(KERN_INFO "OMAP24xx GPIO hardware version %d.%d\n", + (rev >> 4) & 0x0f, rev & 0x0f); + } +#endif for (i = 0; i < gpio_bank_count; i++) { int j, gpio_count = 16; @@ -710,6 +911,7 @@ static int __init _omap_gpio_init(void) if (bank->method == METHOD_GPIO_1610) { __raw_writew(0x0000, bank->base + OMAP1610_GPIO_IRQENABLE1); __raw_writew(0xffff, bank->base + OMAP1610_GPIO_IRQSTATUS1); + __raw_writew(0x0014, bank->base + OMAP1610_GPIO_SYSCONFIG); } #endif #ifdef CONFIG_ARCH_OMAP730 @@ -720,6 +922,14 @@ static int __init _omap_gpio_init(void) gpio_count = 32; /* 730 has 32-bit GPIOs */ } #endif +#ifdef CONFIG_ARCH_OMAP24XX + if (bank->method == METHOD_GPIO_24XX) { + __raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_IRQENABLE1); + __raw_writel(0xffffffff, bank->base + OMAP24XX_GPIO_IRQSTATUS1); + + gpio_count = 32; + } +#endif for (j = bank->virtual_irq_start; j < bank->virtual_irq_start + gpio_count; j++) { if (bank->method == METHOD_MPUIO) @@ -735,12 +945,97 @@ static int __init _omap_gpio_init(void) /* Enable system clock for GPIO module. * The CAM_CLK_CTRL *is* really the right place. */ - if (cpu_is_omap1610() || cpu_is_omap1710()) + if (cpu_is_omap16xx()) omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04, ULPD_CAM_CLK_CTRL); return 0; } +#if defined (CONFIG_ARCH_OMAP16XX) || defined (CONFIG_ARCH_OMAP24XX) +static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg) +{ + int i; + + if (!cpu_is_omap24xx() && !cpu_is_omap16xx()) + return 0; + + for (i = 0; i < gpio_bank_count; i++) { + struct gpio_bank *bank = &gpio_bank[i]; + void __iomem *wake_status; + void __iomem *wake_clear; + void __iomem *wake_set; + + switch (bank->method) { + case METHOD_GPIO_1610: + wake_status = bank->base + OMAP1610_GPIO_WAKEUPENABLE; + wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA; + wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; + break; + case METHOD_GPIO_24XX: + wake_status = bank->base + OMAP24XX_GPIO_SETWKUENA; + wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA; + wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA; + break; + default: + continue; + } + + spin_lock(&bank->lock); + bank->saved_wakeup = __raw_readl(wake_status); + __raw_writel(0xffffffff, wake_clear); + __raw_writel(bank->suspend_wakeup, wake_set); + spin_unlock(&bank->lock); + } + + return 0; +} + +static int omap_gpio_resume(struct sys_device *dev) +{ + int i; + + if (!cpu_is_omap24xx() && !cpu_is_omap16xx()) + return 0; + + for (i = 0; i < gpio_bank_count; i++) { + struct gpio_bank *bank = &gpio_bank[i]; + void __iomem *wake_clear; + void __iomem *wake_set; + + switch (bank->method) { + case METHOD_GPIO_1610: + wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA; + wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; + break; + case METHOD_GPIO_24XX: + wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA; + wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; + break; + default: + continue; + } + + spin_lock(&bank->lock); + __raw_writel(0xffffffff, wake_clear); + __raw_writel(bank->saved_wakeup, wake_set); + spin_unlock(&bank->lock); + } + + return 0; +} + +static struct sysdev_class omap_gpio_sysclass = { + set_kset_name("gpio"), + .suspend = omap_gpio_suspend, + .resume = omap_gpio_resume, +}; + +static struct sys_device omap_gpio_device = { + .id = 0, + .cls = &omap_gpio_sysclass, +}; +#endif + /* * This may get called early from board specific init */ @@ -752,11 +1047,30 @@ int omap_gpio_init(void) return 0; } +static int __init omap_gpio_sysinit(void) +{ + int ret = 0; + + if (!initialized) + ret = _omap_gpio_init(); + +#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) + if (cpu_is_omap16xx() || cpu_is_omap24xx()) { + if (ret == 0) { + ret = sysdev_class_register(&omap_gpio_sysclass); + if (ret == 0) + ret = sysdev_register(&omap_gpio_device); + } + } +#endif + + return ret; +} + EXPORT_SYMBOL(omap_request_gpio); EXPORT_SYMBOL(omap_free_gpio); EXPORT_SYMBOL(omap_set_gpio_direction); EXPORT_SYMBOL(omap_set_gpio_dataout); EXPORT_SYMBOL(omap_get_gpio_datain); -EXPORT_SYMBOL(omap_set_gpio_edge_ctrl); -arch_initcall(omap_gpio_init); +arch_initcall(omap_gpio_sysinit); diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index 43567d5..9c9b7df 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -27,6 +27,7 @@ #include <asm/arch/dma.h> #include <asm/arch/mux.h> #include <asm/arch/irqs.h> +#include <asm/arch/dsp_common.h> #include <asm/arch/mcbsp.h> #include <asm/hardware/clock.h> @@ -187,9 +188,6 @@ static int omap_mcbsp_check(unsigned int id) return -1; } -#define EN_XORPCK 1 -#define DSP_RSTCT2 0xe1008014 - static void omap_mcbsp_dsp_request(void) { if (cpu_is_omap1510() || cpu_is_omap16xx()) { @@ -198,6 +196,11 @@ static void omap_mcbsp_dsp_request(void) /* enable 12MHz clock to mcbsp 1 & 3 */ clk_use(mcbsp_dspxor_ck); + + /* + * DSP external peripheral reset + * FIXME: This should be moved to dsp code + */ __raw_writew(__raw_readw(DSP_RSTCT2) | 1 | 1 << 1, DSP_RSTCT2); } diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c index ea7b955..6448204 100644 --- a/arch/arm/plat-omap/mux.c +++ b/arch/arm/plat-omap/mux.c @@ -48,6 +48,9 @@ omap_cfg_reg(const reg_cfg_t reg_cfg) pull_orig = 0, pull = 0; unsigned int mask, warn = 0; + if (cpu_is_omap7xx()) + return 0; + if (reg_cfg > ARRAY_SIZE(reg_cfg_table)) { printk(KERN_ERR "MUX: reg_cfg %d\n", reg_cfg); return -EINVAL; diff --git a/arch/arm/plat-omap/ocpi.c b/arch/arm/plat-omap/ocpi.c index 2ede2ee..1fb16f9 100644 --- a/arch/arm/plat-omap/ocpi.c +++ b/arch/arm/plat-omap/ocpi.c @@ -25,6 +25,7 @@ #include <linux/config.h> #include <linux/module.h> +#include <linux/version.h> #include <linux/types.h> #include <linux/errno.h> #include <linux/kernel.h> diff --git a/arch/arm/plat-omap/pm.c b/arch/arm/plat-omap/pm.c index e6536b1..e15c6c1 100644 --- a/arch/arm/plat-omap/pm.c +++ b/arch/arm/plat-omap/pm.c @@ -39,24 +39,32 @@ #include <linux/sched.h> #include <linux/proc_fs.h> #include <linux/pm.h> +#include <linux/interrupt.h> #include <asm/io.h> +#include <asm/irq.h> #include <asm/mach/time.h> -#include <asm/mach-types.h> +#include <asm/mach/irq.h> -#include <asm/arch/omap16xx.h> +#include <asm/mach-types.h> +#include <asm/arch/irqs.h> +#include <asm/arch/tc.h> #include <asm/arch/pm.h> #include <asm/arch/mux.h> -#include <asm/arch/tc.h> #include <asm/arch/tps65010.h> +#include <asm/arch/dsp_common.h> #include "clock.h" +#include "sram.h" static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE]; static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE]; static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE]; static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE]; +static void (*omap_sram_idle)(void) = NULL; +static void (*omap_sram_suspend)(unsigned long r0, unsigned long r1) = NULL; + /* * Let's power down on idle, but only if we are really * idle, because once we start down the path of @@ -65,7 +73,6 @@ static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE]; */ void omap_pm_idle(void) { - int (*func_ptr)(void) = 0; unsigned int mask32 = 0; /* @@ -84,6 +91,13 @@ void omap_pm_idle(void) mask32 = omap_readl(ARM_SYSST); /* + * Prevent the ULPD from entering low power state by setting + * POWER_CTRL_REG:4 = 0 + */ + omap_writew(omap_readw(ULPD_POWER_CTRL) & + ~ULPD_DEEP_SLEEP_TRANSITION_EN, ULPD_POWER_CTRL); + + /* * Since an interrupt may set up a timer, we don't want to * reprogram the hardware timer with interrupts enabled. * Re-enable interrupts only after returning from idle. @@ -92,18 +106,9 @@ void omap_pm_idle(void) if ((mask32 & DSP_IDLE) == 0) { __asm__ volatile ("mcr p15, 0, r0, c7, c0, 4"); - } else { - - if (cpu_is_omap1510()) { - func_ptr = (void *)(OMAP1510_SRAM_IDLE_SUSPEND); - } else if (cpu_is_omap1610() || cpu_is_omap1710()) { - func_ptr = (void *)(OMAP1610_SRAM_IDLE_SUSPEND); - } else if (cpu_is_omap5912()) { - func_ptr = (void *)(OMAP5912_SRAM_IDLE_SUSPEND); - } + } else + omap_sram_idle(); - func_ptr(); - } local_fiq_enable(); local_irq_enable(); } @@ -115,58 +120,55 @@ void omap_pm_idle(void) */ static void omap_pm_wakeup_setup(void) { - /* - * Enable ARM XOR clock and release peripheral from reset by - * writing 1 to PER_EN bit in ARM_RSTCT2, this is required - * for UART configuration to use UART2 to wake up. - */ - - omap_writel(omap_readl(ARM_IDLECT2) | ENABLE_XORCLK, ARM_IDLECT2); - omap_writel(omap_readl(ARM_RSTCT2) | PER_EN, ARM_RSTCT2); - omap_writew(MODEM_32K_EN, ULPD_CLOCK_CTRL); + u32 level1_wake = OMAP_IRQ_BIT(INT_IH2_IRQ); + u32 level2_wake = OMAP_IRQ_BIT(INT_UART2) | OMAP_IRQ_BIT(INT_KEYBOARD); /* - * Turn off all interrupts except L1-2nd level cascade, - * and the L2 wakeup interrupts: keypad and UART2. + * Turn off all interrupts except GPIO bank 1, L1-2nd level cascade, + * and the L2 wakeup interrupts: keypad and UART2. Note that the + * drivers must still separately call omap_set_gpio_wakeup() to + * wake up to a GPIO interrupt. */ + if (cpu_is_omap1510() || cpu_is_omap16xx()) + level1_wake |= OMAP_IRQ_BIT(INT_GPIO_BANK1); + else if (cpu_is_omap730()) + level1_wake |= OMAP_IRQ_BIT(INT_730_GPIO_BANK1); - omap_writel(~IRQ_LEVEL2, OMAP_IH1_MIR); + omap_writel(~level1_wake, OMAP_IH1_MIR); - if (cpu_is_omap1510()) { - omap_writel(~(IRQ_UART2 | IRQ_KEYBOARD), OMAP_IH2_MIR); - } + if (cpu_is_omap1510()) + omap_writel(~level2_wake, OMAP_IH2_MIR); + /* INT_1610_WAKE_UP_REQ is needed for GPIO wakeup... */ if (cpu_is_omap16xx()) { - omap_writel(~(IRQ_UART2 | IRQ_KEYBOARD), OMAP_IH2_0_MIR); - - omap_writel(~0x0, OMAP_IH2_1_MIR); + omap_writel(~level2_wake, OMAP_IH2_0_MIR); + omap_writel(~OMAP_IRQ_BIT(INT_1610_WAKE_UP_REQ), OMAP_IH2_1_MIR); omap_writel(~0x0, OMAP_IH2_2_MIR); omap_writel(~0x0, OMAP_IH2_3_MIR); } - /* New IRQ agreement */ + /* New IRQ agreement, recalculate in cascade order */ + omap_writel(1, OMAP_IH2_CONTROL); omap_writel(1, OMAP_IH1_CONTROL); - - /* external PULL to down, bit 22 = 0 */ - omap_writel(omap_readl(PULL_DWN_CTRL_2) & ~(1<<22), PULL_DWN_CTRL_2); } void omap_pm_suspend(void) { - unsigned int mask32 = 0; unsigned long arg0 = 0, arg1 = 0; - int (*func_ptr)(unsigned short, unsigned short) = 0; - unsigned short save_dsp_idlect2; - printk("PM: OMAP%x is entering deep sleep now ...\n", system_rev); + printk("PM: OMAP%x is trying to enter deep sleep...\n", system_rev); + + omap_serial_wake_trigger(1); if (machine_is_omap_osk()) { /* Stop LED1 (D9) blink */ tps65010_set_led(LED1, OFF); } + omap_writew(0xffff, ULPD_SOFT_DISABLE_REQ_REG); + /* - * Step 1: turn off interrupts + * Step 1: turn off interrupts (FIXME: NOTE: already disabled) */ local_irq_disable(); @@ -207,6 +209,8 @@ void omap_pm_suspend(void) ARM_SAVE(ARM_CKCTL); ARM_SAVE(ARM_IDLECT1); ARM_SAVE(ARM_IDLECT2); + if (!(cpu_is_omap1510())) + ARM_SAVE(ARM_IDLECT3); ARM_SAVE(ARM_EWUPCT); ARM_SAVE(ARM_RSTCT1); ARM_SAVE(ARM_RSTCT2); @@ -214,42 +218,12 @@ void omap_pm_suspend(void) ULPD_SAVE(ULPD_CLOCK_CTRL); ULPD_SAVE(ULPD_STATUS_REQ); - /* - * Step 3: LOW_PWR signal enabling - * - * Allow the LOW_PWR signal to be visible on MPUIO5 ball. - */ - if (cpu_is_omap1510()) { - /* POWER_CTRL_REG = 0x1 (LOW_POWER is available) */ - omap_writew(omap_readw(ULPD_POWER_CTRL) | - OMAP1510_ULPD_LOW_POWER_REQ, ULPD_POWER_CTRL); - } else if (cpu_is_omap16xx()) { - /* POWER_CTRL_REG = 0x1 (LOW_POWER is available) */ - omap_writew(omap_readw(ULPD_POWER_CTRL) | - OMAP1610_ULPD_LOW_POWER_REQ, ULPD_POWER_CTRL); - } - - /* configure LOW_PWR pin */ - omap_cfg_reg(T20_1610_LOW_PWR); + /* (Step 3 removed - we now allow deep sleep by default) */ /* * Step 4: OMAP DSP Shutdown */ - /* Set DSP_RST = 1 and DSP_EN = 0, put DSP block into reset */ - omap_writel((omap_readl(ARM_RSTCT1) | DSP_RST) & ~DSP_ENABLE, - ARM_RSTCT1); - - /* Set DSP boot mode to DSP-IDLE, DSP_BOOT_MODE = 0x2 */ - omap_writel(DSP_IDLE_MODE, MPUI_DSP_BOOT_CONFIG); - - /* Set EN_DSPCK = 0, stop DSP block clock */ - omap_writel(omap_readl(ARM_CKCTL) & ~DSP_CLOCK_ENABLE, ARM_CKCTL); - - /* Stop any DSP domain clocks */ - omap_writel(omap_readl(ARM_IDLECT2) | (1<<EN_APICK), ARM_IDLECT2); - save_dsp_idlect2 = __raw_readw(DSP_IDLECT2); - __raw_writew(0, DSP_IDLECT2); /* * Step 5: Wakeup Event Setup @@ -258,24 +232,9 @@ void omap_pm_suspend(void) omap_pm_wakeup_setup(); /* - * Step 6a: ARM and Traffic controller shutdown - * - * Step 6 starts here with clock and watchdog disable + * Step 6: ARM and Traffic controller shutdown */ - /* stop clocks */ - mask32 = omap_readl(ARM_IDLECT2); - mask32 &= ~(1<<EN_WDTCK); /* bit 0 -> 0 (WDT clock) */ - mask32 |= (1<<EN_XORPCK); /* bit 1 -> 1 (XORPCK clock) */ - mask32 &= ~(1<<EN_PERCK); /* bit 2 -> 0 (MPUPER_CK clock) */ - mask32 &= ~(1<<EN_LCDCK); /* bit 3 -> 0 (LCDC clock) */ - mask32 &= ~(1<<EN_LBCK); /* bit 4 -> 0 (local bus clock) */ - mask32 |= (1<<EN_APICK); /* bit 6 -> 1 (MPUI clock) */ - mask32 &= ~(1<<EN_TIMCK); /* bit 7 -> 0 (MPU timer clock) */ - mask32 &= ~(1<<DMACK_REQ); /* bit 8 -> 0 (DMAC clock) */ - mask32 &= ~(1<<EN_GPIOCK); /* bit 9 -> 0 (GPIO clock) */ - omap_writel(mask32, ARM_IDLECT2); - /* disable ARM watchdog */ omap_writel(0x00F5, OMAP_WDT_TIMER_MODE); omap_writel(0x00A0, OMAP_WDT_TIMER_MODE); @@ -295,47 +254,24 @@ void omap_pm_suspend(void) arg0 = arm_sleep_save[ARM_SLEEP_SAVE_ARM_IDLECT1]; arg1 = arm_sleep_save[ARM_SLEEP_SAVE_ARM_IDLECT2]; - if (cpu_is_omap1510()) { - func_ptr = (void *)(OMAP1510_SRAM_API_SUSPEND); - } else if (cpu_is_omap1610() || cpu_is_omap1710()) { - func_ptr = (void *)(OMAP1610_SRAM_API_SUSPEND); - } else if (cpu_is_omap5912()) { - func_ptr = (void *)(OMAP5912_SRAM_API_SUSPEND); - } - /* * Step 6c: ARM and Traffic controller shutdown * * Jump to assembly code. The processor will stay there * until wake up. */ - - func_ptr(arg0, arg1); + omap_sram_suspend(arg0, arg1); /* * If we are here, processor is woken up! */ - if (cpu_is_omap1510()) { - /* POWER_CTRL_REG = 0x0 (LOW_POWER is disabled) */ - omap_writew(omap_readw(ULPD_POWER_CTRL) & - ~OMAP1510_ULPD_LOW_POWER_REQ, ULPD_POWER_CTRL); - } else if (cpu_is_omap16xx()) { - /* POWER_CTRL_REG = 0x0 (LOW_POWER is disabled) */ - omap_writew(omap_readw(ULPD_POWER_CTRL) & - ~OMAP1610_ULPD_LOW_POWER_REQ, ULPD_POWER_CTRL); - } - - - /* Restore DSP clocks */ - omap_writel(omap_readl(ARM_IDLECT2) | (1<<EN_APICK), ARM_IDLECT2); - __raw_writew(save_dsp_idlect2, DSP_IDLECT2); - ARM_RESTORE(ARM_IDLECT2); - /* * Restore ARM state, except ARM_IDLECT1/2 which omap_cpu_suspend did */ + if (!(cpu_is_omap1510())) + ARM_RESTORE(ARM_IDLECT3); ARM_RESTORE(ARM_CKCTL); ARM_RESTORE(ARM_EWUPCT); ARM_RESTORE(ARM_RSTCT1); @@ -366,6 +302,8 @@ void omap_pm_suspend(void) MPUI1610_RESTORE(OMAP_IH2_3_MIR); } + omap_writew(0, ULPD_SOFT_DISABLE_REQ_REG); + /* * Reenable interrupts */ @@ -373,6 +311,8 @@ void omap_pm_suspend(void) local_irq_enable(); local_fiq_enable(); + omap_serial_wake_trigger(0); + printk("PM: OMAP%x is re-starting from deep sleep...\n", system_rev); if (machine_is_omap_osk()) { @@ -401,6 +341,8 @@ static int omap_pm_read_proc( ARM_SAVE(ARM_CKCTL); ARM_SAVE(ARM_IDLECT1); ARM_SAVE(ARM_IDLECT2); + if (!(cpu_is_omap1510())) + ARM_SAVE(ARM_IDLECT3); ARM_SAVE(ARM_EWUPCT); ARM_SAVE(ARM_RSTCT1); ARM_SAVE(ARM_RSTCT2); @@ -436,6 +378,7 @@ static int omap_pm_read_proc( "ARM_CKCTL_REG: 0x%-8x \n" "ARM_IDLECT1_REG: 0x%-8x \n" "ARM_IDLECT2_REG: 0x%-8x \n" + "ARM_IDLECT3_REG: 0x%-8x \n" "ARM_EWUPCT_REG: 0x%-8x \n" "ARM_RSTCT1_REG: 0x%-8x \n" "ARM_RSTCT2_REG: 0x%-8x \n" @@ -449,6 +392,7 @@ static int omap_pm_read_proc( ARM_SHOW(ARM_CKCTL), ARM_SHOW(ARM_IDLECT1), ARM_SHOW(ARM_IDLECT2), + ARM_SHOW(ARM_IDLECT3), ARM_SHOW(ARM_EWUPCT), ARM_SHOW(ARM_RSTCT1), ARM_SHOW(ARM_RSTCT2), @@ -507,7 +451,7 @@ static void omap_pm_init_proc(void) entry = create_proc_read_entry("driver/omap_pm", S_IWUSR | S_IRUGO, NULL, - omap_pm_read_proc, 0); + omap_pm_read_proc, NULL); } #endif /* DEBUG && CONFIG_PROC_FS */ @@ -580,7 +524,21 @@ static int omap_pm_finish(suspend_state_t state) } -struct pm_ops omap_pm_ops ={ +static irqreturn_t omap_wakeup_interrupt(int irq, void * dev, + struct pt_regs * regs) +{ + return IRQ_HANDLED; +} + +static struct irqaction omap_wakeup_irq = { + .name = "peripheral wakeup", + .flags = SA_INTERRUPT, + .handler = omap_wakeup_interrupt +}; + + + +static struct pm_ops omap_pm_ops ={ .pm_disk_mode = 0, .prepare = omap_pm_prepare, .enter = omap_pm_enter, @@ -590,42 +548,61 @@ struct pm_ops omap_pm_ops ={ static int __init omap_pm_init(void) { printk("Power Management for TI OMAP.\n"); - pm_idle = omap_pm_idle; /* * We copy the assembler sleep/wakeup routines to SRAM. * These routines need to be in SRAM as that's the only * memory the MPU can see when it wakes up. */ - -#ifdef CONFIG_ARCH_OMAP1510 if (cpu_is_omap1510()) { - memcpy((void *)OMAP1510_SRAM_IDLE_SUSPEND, - omap1510_idle_loop_suspend, - omap1510_idle_loop_suspend_sz); - memcpy((void *)OMAP1510_SRAM_API_SUSPEND, omap1510_cpu_suspend, - omap1510_cpu_suspend_sz); - } else -#endif - if (cpu_is_omap1610() || cpu_is_omap1710()) { - memcpy((void *)OMAP1610_SRAM_IDLE_SUSPEND, - omap1610_idle_loop_suspend, - omap1610_idle_loop_suspend_sz); - memcpy((void *)OMAP1610_SRAM_API_SUSPEND, omap1610_cpu_suspend, - omap1610_cpu_suspend_sz); - } else if (cpu_is_omap5912()) { - memcpy((void *)OMAP5912_SRAM_IDLE_SUSPEND, - omap1610_idle_loop_suspend, - omap1610_idle_loop_suspend_sz); - memcpy((void *)OMAP5912_SRAM_API_SUSPEND, omap1610_cpu_suspend, - omap1610_cpu_suspend_sz); + omap_sram_idle = omap_sram_push(omap1510_idle_loop_suspend, + omap1510_idle_loop_suspend_sz); + omap_sram_suspend = omap_sram_push(omap1510_cpu_suspend, + omap1510_cpu_suspend_sz); + } else if (cpu_is_omap16xx()) { + omap_sram_idle = omap_sram_push(omap1610_idle_loop_suspend, + omap1610_idle_loop_suspend_sz); + omap_sram_suspend = omap_sram_push(omap1610_cpu_suspend, + omap1610_cpu_suspend_sz); } + if (omap_sram_idle == NULL || omap_sram_suspend == NULL) { + printk(KERN_ERR "PM not initialized: Missing SRAM support\n"); + return -ENODEV; + } + + pm_idle = omap_pm_idle; + + setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq); +#if 0 + /* --- BEGIN BOARD-DEPENDENT CODE --- */ + /* Sleepx mask direction */ + omap_writew((omap_readw(0xfffb5008) & ~2), 0xfffb5008); + /* Unmask sleepx signal */ + omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004); + /* --- END BOARD-DEPENDENT CODE --- */ +#endif + + /* Program new power ramp-up time + * (0 for most boards since we don't lower voltage when in deep sleep) + */ + omap_writew(ULPD_SETUP_ANALOG_CELL_3_VAL, ULPD_SETUP_ANALOG_CELL_3); + + /* Setup ULPD POWER_CTRL_REG - enter deep sleep whenever possible */ + omap_writew(ULPD_POWER_CTRL_REG_VAL, ULPD_POWER_CTRL); + + /* Configure IDLECT3 */ + if (cpu_is_omap16xx()) + omap_writel(OMAP1610_IDLECT3_VAL, OMAP1610_IDLECT3); + pm_set_ops(&omap_pm_ops); #if defined(DEBUG) && defined(CONFIG_PROC_FS) omap_pm_init_proc(); #endif + /* configure LOW_PWR pin */ + omap_cfg_reg(T20_1610_LOW_PWR); + return 0; } __initcall(omap_pm_init); diff --git a/arch/arm/plat-omap/sleep.S b/arch/arm/plat-omap/sleep.S index 279490c..9f74583 100644 --- a/arch/arm/plat-omap/sleep.S +++ b/arch/arm/plat-omap/sleep.S @@ -66,7 +66,7 @@ ENTRY(omap1510_idle_loop_suspend) @ get ARM_IDLECT2 into r2 ldrh r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] mov r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff - orr r5,r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff00 + orr r5, r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff00 strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] @ request ARM idle @@ -76,7 +76,7 @@ ENTRY(omap1510_idle_loop_suspend) strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] mov r5, #IDLE_WAIT_CYCLES & 0xff - orr r5, r5, #IDLE_WAIT_CYCLES & 0xff00 + orr r5, r5, #IDLE_WAIT_CYCLES & 0xff00 l_1510: subs r5, r5, #1 bne l_1510 /* @@ -96,7 +96,7 @@ l_1510: subs r5, r5, #1 strh r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] strh r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - ldmfd sp!, {r0 - r12, pc} @ restore regs and return + ldmfd sp!, {r0 - r12, pc} @ restore regs and return ENTRY(omap1510_idle_loop_suspend_sz) .word . - omap1510_idle_loop_suspend @@ -115,8 +115,8 @@ ENTRY(omap1610_idle_loop_suspend) @ turn off clock domains @ get ARM_IDLECT2 into r2 ldrh r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - mov r5, #OMAP1610_IDLE_CLOCK_DOMAINS & 0xff - orr r5,r5, #OMAP1610_IDLE_CLOCK_DOMAINS & 0xff00 + mov r5, #OMAP1610_IDLECT2_SLEEP_VAL & 0xff + orr r5, r5, #OMAP1610_IDLECT2_SLEEP_VAL & 0xff00 strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] @ request ARM idle @@ -126,7 +126,7 @@ ENTRY(omap1610_idle_loop_suspend) strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] mov r5, #IDLE_WAIT_CYCLES & 0xff - orr r5, r5, #IDLE_WAIT_CYCLES & 0xff00 + orr r5, r5, #IDLE_WAIT_CYCLES & 0xff00 l_1610: subs r5, r5, #1 bne l_1610 /* @@ -146,7 +146,7 @@ l_1610: subs r5, r5, #1 strh r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] strh r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - ldmfd sp!, {r0 - r12, pc} @ restore regs and return + ldmfd sp!, {r0 - r12, pc} @ restore regs and return ENTRY(omap1610_idle_loop_suspend_sz) .word . - omap1610_idle_loop_suspend @@ -208,7 +208,7 @@ ENTRY(omap1510_cpu_suspend) @ turn off clock domains mov r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff - orr r5,r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff00 + orr r5, r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff00 strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] @ request ARM idle @@ -217,7 +217,7 @@ ENTRY(omap1510_cpu_suspend) strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] mov r5, #IDLE_WAIT_CYCLES & 0xff - orr r5, r5, #IDLE_WAIT_CYCLES & 0xff00 + orr r5, r5, #IDLE_WAIT_CYCLES & 0xff00 l_1510_2: subs r5, r5, #1 bne l_1510_2 @@ -237,7 +237,7 @@ l_1510_2: strh r0, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] @ restore regs and return - ldmfd sp!, {r0 - r12, pc} + ldmfd sp!, {r0 - r12, pc} ENTRY(omap1510_cpu_suspend_sz) .word . - omap1510_cpu_suspend @@ -249,21 +249,26 @@ ENTRY(omap1610_cpu_suspend) @ save registers on stack stmfd sp!, {r0 - r12, lr} + @ Drain write cache + mov r4, #0 + mcr p15, 0, r0, c7, c10, 4 + nop + @ load base address of Traffic Controller - mov r4, #TCMIF_ASM_BASE & 0xff000000 - orr r4, r4, #TCMIF_ASM_BASE & 0x00ff0000 - orr r4, r4, #TCMIF_ASM_BASE & 0x0000ff00 + mov r6, #TCMIF_ASM_BASE & 0xff000000 + orr r6, r6, #TCMIF_ASM_BASE & 0x00ff0000 + orr r6, r6, #TCMIF_ASM_BASE & 0x0000ff00 @ prepare to put SDRAM into self-refresh manually - ldr r5, [r4, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff] - orr r5, r5, #SELF_REFRESH_MODE & 0xff000000 - orr r5, r5, #SELF_REFRESH_MODE & 0x000000ff - str r5, [r4, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff] + ldr r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff] + orr r9, r7, #SELF_REFRESH_MODE & 0xff000000 + orr r9, r9, #SELF_REFRESH_MODE & 0x000000ff + str r9, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff] @ prepare to put EMIFS to Sleep - ldr r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff] - orr r5, r5, #IDLE_EMIFS_REQUEST & 0xff - str r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff] + ldr r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff] + orr r9, r8, #IDLE_EMIFS_REQUEST & 0xff + str r9, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff] @ load base address of ARM_IDLECT1 and ARM_IDLECT2 mov r4, #CLKGEN_REG_ASM_BASE & 0xff000000 @@ -271,26 +276,22 @@ ENTRY(omap1610_cpu_suspend) orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00 @ turn off clock domains - mov r5, #OMAP1610_IDLE_CLOCK_DOMAINS & 0xff - orr r5,r5, #OMAP1610_IDLE_CLOCK_DOMAINS & 0xff00 - strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - - @ work around errata of OMAP1610/5912. Enable (!) peripheral - @ clock to let the chip go into deep sleep - ldrh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - orr r5,r5, #EN_PERCK_BIT & 0xff + @ do not disable PERCK (0x04) + mov r5, #OMAP1610_IDLECT2_SLEEP_VAL & 0xff + orr r5, r5, #OMAP1610_IDLECT2_SLEEP_VAL & 0xff00 strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] @ request ARM idle - mov r3, #OMAP1610_DEEP_SLEEP_REQUEST & 0xff - orr r3, r3, #OMAP1610_DEEP_SLEEP_REQUEST & 0xff00 + mov r3, #OMAP1610_IDLECT1_SLEEP_VAL & 0xff + orr r3, r3, #OMAP1610_IDLECT1_SLEEP_VAL & 0xff00 strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - mov r5, #IDLE_WAIT_CYCLES & 0xff - orr r5, r5, #IDLE_WAIT_CYCLES & 0xff00 -l_1610_2: - subs r5, r5, #1 - bne l_1610_2 + @ disable instruction cache + mrc p15, 0, r9, c1, c0, 0 + bic r2, r9, #0x1000 + mcr p15, 0, r2, c1, c0, 0 + nop + /* * Let's wait for the next wake up event to wake us up. r0 can't be * used here because r0 holds ARM_IDLECT1 @@ -301,13 +302,21 @@ l_1610_2: * omap1610_cpu_suspend()'s resume point. * * It will just start executing here, so we'll restore stuff from the - * stack, reset the ARM_IDLECT1 and ARM_IDLECT2. + * stack. */ + @ re-enable Icache + mcr p15, 0, r9, c1, c0, 0 + + @ reset the ARM_IDLECT1 and ARM_IDLECT2. strh r1, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] strh r0, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] + @ Restore EMIFF controls + str r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff] + str r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff] + @ restore regs and return - ldmfd sp!, {r0 - r12, pc} + ldmfd sp!, {r0 - r12, pc} ENTRY(omap1610_cpu_suspend_sz) .word . - omap1610_cpu_suspend diff --git a/arch/arm/plat-omap/sram-fn.S b/arch/arm/plat-omap/sram-fn.S new file mode 100644 index 0000000..4bea369 --- /dev/null +++ b/arch/arm/plat-omap/sram-fn.S @@ -0,0 +1,58 @@ +/* + * linux/arch/arm/plat-omap/sram.S + * + * Functions that need to be run in internal SRAM + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/config.h> +#include <linux/linkage.h> +#include <asm/assembler.h> +#include <asm/arch/io.h> +#include <asm/arch/hardware.h> + + .text + +/* + * Reprograms ULPD and CKCTL. + */ +ENTRY(sram_reprogram_clock) + stmfd sp!, {r0 - r12, lr} @ save registers on stack + + mov r2, #IO_ADDRESS(DPLL_CTL) & 0xff000000 + orr r2, r2, #IO_ADDRESS(DPLL_CTL) & 0x00ff0000 + orr r2, r2, #IO_ADDRESS(DPLL_CTL) & 0x0000ff00 + + mov r3, #IO_ADDRESS(ARM_CKCTL) & 0xff000000 + orr r3, r3, #IO_ADDRESS(ARM_CKCTL) & 0x00ff0000 + orr r3, r3, #IO_ADDRESS(ARM_CKCTL) & 0x0000ff00 + + tst r0, #1 << 4 @ want lock mode? + beq newck @ nope + bic r0, r0, #1 << 4 @ else clear lock bit + strh r0, [r2] @ set dpll into bypass mode + orr r0, r0, #1 << 4 @ set lock bit again + +newck: + strh r1, [r3] @ write new ckctl value + strh r0, [r2] @ write new dpll value + + mov r4, #0x0700 @ let the clocks settle + orr r4, r4, #0x00ff +delay: sub r4, r4, #1 + cmp r4, #0 + bne delay + +lock: ldrh r4, [r2], #0 @ read back dpll value + tst r0, #1 << 4 @ want lock mode? + beq out @ nope + tst r4, #1 << 0 @ dpll rate locked? + beq lock @ try again + +out: + ldmfd sp!, {r0 - r12, pc} @ restore regs and return +ENTRY(sram_reprogram_clock_sz) + .word . - sram_reprogram_clock diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c new file mode 100644 index 0000000..7719a40 --- /dev/null +++ b/arch/arm/plat-omap/sram.c @@ -0,0 +1,116 @@ +/* + * linux/arch/arm/plat-omap/sram.c + * + * OMAP SRAM detection and management + * + * Copyright (C) 2005 Nokia Corporation + * Written by Tony Lindgren <tony@atomide.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> + +#include <asm/mach/map.h> +#include <asm/io.h> +#include <asm/cacheflush.h> + +#include "sram.h" + +#define OMAP1_SRAM_BASE 0xd0000000 +#define OMAP1_SRAM_START 0x20000000 +#define SRAM_BOOTLOADER_SZ 0x80 + +static unsigned long omap_sram_base; +static unsigned long omap_sram_size; +static unsigned long omap_sram_ceil; + +/* + * The amount of SRAM depends on the core type: + * 730 = 200K, 1510 = 512K, 5912 = 256K, 1610 = 16K, 1710 = 16K + * Note that we cannot try to test for SRAM here because writes + * to secure SRAM will hang the system. Also the SRAM is not + * yet mapped at this point. + */ +void __init omap_detect_sram(void) +{ + omap_sram_base = OMAP1_SRAM_BASE; + + if (cpu_is_omap730()) + omap_sram_size = 0x32000; + else if (cpu_is_omap1510()) + omap_sram_size = 0x80000; + else if (cpu_is_omap1610() || cpu_is_omap1621() || cpu_is_omap1710()) + omap_sram_size = 0x4000; + else if (cpu_is_omap1611()) + omap_sram_size = 0x3e800; + else { + printk(KERN_ERR "Could not detect SRAM size\n"); + omap_sram_size = 0x4000; + } + + printk(KERN_INFO "SRAM size: 0x%lx\n", omap_sram_size); + omap_sram_ceil = omap_sram_base + omap_sram_size; +} + +static struct map_desc omap_sram_io_desc[] __initdata = { + { OMAP1_SRAM_BASE, OMAP1_SRAM_START, 0, MT_DEVICE } +}; + +/* + * In order to use last 2kB of SRAM on 1611b, we must round the size + * up to multiple of PAGE_SIZE. We cannot use ioremap for SRAM, as + * clock init needs SRAM early. + */ +void __init omap_map_sram(void) +{ + if (omap_sram_size == 0) + return; + + omap_sram_io_desc[0].length = (omap_sram_size + PAGE_SIZE-1)/PAGE_SIZE; + omap_sram_io_desc[0].length *= PAGE_SIZE; + iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc)); + + /* + * Looks like we need to preserve some bootloader code at the + * beginning of SRAM for jumping to flash for reboot to work... + */ + memset((void *)omap_sram_base + SRAM_BOOTLOADER_SZ, 0, + omap_sram_size - SRAM_BOOTLOADER_SZ); +} + +static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl) = NULL; + +void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl) +{ + if (_omap_sram_reprogram_clock == NULL) + panic("Cannot use SRAM"); + + return _omap_sram_reprogram_clock(dpllctl, ckctl); +} + +void * omap_sram_push(void * start, unsigned long size) +{ + if (size > (omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ))) { + printk(KERN_ERR "Not enough space in SRAM\n"); + return NULL; + } + omap_sram_ceil -= size; + omap_sram_ceil &= ~0x3; + memcpy((void *)omap_sram_ceil, start, size); + + return (void *)omap_sram_ceil; +} + +void __init omap_sram_init(void) +{ + omap_detect_sram(); + omap_map_sram(); + _omap_sram_reprogram_clock = omap_sram_push(sram_reprogram_clock, + sram_reprogram_clock_sz); +} diff --git a/arch/arm/plat-omap/sram.h b/arch/arm/plat-omap/sram.h new file mode 100644 index 0000000..71984ef --- /dev/null +++ b/arch/arm/plat-omap/sram.h @@ -0,0 +1,21 @@ +/* + * linux/arch/arm/plat-omap/sram.h + * + * Interface for functions that need to be run in internal SRAM + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_OMAP_SRAM_H +#define __ARCH_ARM_OMAP_SRAM_H + +extern void * omap_sram_push(void * start, unsigned long size); +extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl); + +/* Do not use these */ +extern void sram_reprogram_clock(u32 ckctl, u32 dpllctl); +extern unsigned long sram_reprogram_clock_sz; + +#endif diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c index 25bc4a8..98f1c76 100644 --- a/arch/arm/plat-omap/usb.c +++ b/arch/arm/plat-omap/usb.c @@ -41,6 +41,7 @@ /* These routines should handle the standard chip-specific modes * for usb0/1/2 ports, covering basic mux and transceiver setup. + * Call omap_usb_init() once, from INIT_MACHINE(). * * Some board-*.c files will need to set up additional mux options, * like for suspend handling, vbus sensing, GPIOs, and the D+ pullup. diff --git a/arch/arm26/Kconfig b/arch/arm26/Kconfig index 1f03732..1f00b3d 100644 --- a/arch/arm26/Kconfig +++ b/arch/arm26/Kconfig @@ -55,6 +55,10 @@ config GENERIC_BUST_SPINLOCK config GENERIC_ISA_DMA bool +config ARCH_MAY_HAVE_PC_FDC + bool + default y + source "init/Kconfig" diff --git a/arch/arm26/Makefile b/arch/arm26/Makefile index ada8985..e9cb8ef 100644 --- a/arch/arm26/Makefile +++ b/arch/arm26/Makefile @@ -17,10 +17,6 @@ ifeq ($(CONFIG_FRAME_POINTER),y) CFLAGS +=-fno-omit-frame-pointer -mno-sched-prolog endif -ifeq ($(CONFIG_DEBUG_INFO),y) -CFLAGS +=-g -endif - CFLAGS_BOOT :=-mapcs-26 -mcpu=arm3 -msoft-float -Uarm CFLAGS +=-mapcs-26 -mcpu=arm3 -msoft-float -Uarm AFLAGS +=-mapcs-26 -mcpu=arm3 -msoft-float diff --git a/arch/arm26/kernel/time.c b/arch/arm26/kernel/time.c index 549a6b2..e66aedd 100644 --- a/arch/arm26/kernel/time.c +++ b/arch/arm26/kernel/time.c @@ -114,7 +114,7 @@ static unsigned long next_rtc_update; */ static inline void do_set_rtc(void) { - if (time_status & STA_UNSYNC || set_rtc == NULL) + if (!ntp_synced() || set_rtc == NULL) return; //FIXME - timespec.tv_sec is a time_t not unsigned long @@ -189,10 +189,7 @@ int do_settimeofday(struct timespec *tv) xtime.tv_sec = tv->tv_sec; xtime.tv_nsec = tv->tv_nsec; - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); clock_was_set(); return 0; diff --git a/arch/cris/arch-v10/kernel/time.c b/arch/cris/arch-v10/kernel/time.c index 6b7b4e0..dc3dfe9 100644 --- a/arch/cris/arch-v10/kernel/time.c +++ b/arch/cris/arch-v10/kernel/time.c @@ -240,7 +240,7 @@ timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) * The division here is not time critical since it will run once in * 11 minutes */ - if ((time_status & STA_UNSYNC) == 0 && + if (ntp_synced() && xtime.tv_sec > last_rtc_update + 660 && (xtime.tv_nsec / 1000) >= 500000 - (tick_nsec / 1000) / 2 && (xtime.tv_nsec / 1000) <= 500000 + (tick_nsec / 1000) / 2) { diff --git a/arch/cris/kernel/time.c b/arch/cris/kernel/time.c index fa2d432..a2d99b4 100644 --- a/arch/cris/kernel/time.c +++ b/arch/cris/kernel/time.c @@ -114,10 +114,7 @@ int do_settimeofday(struct timespec *tv) set_normalized_timespec(&xtime, sec, nsec); set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); clock_was_set(); return 0; diff --git a/arch/frv/kernel/time.c b/arch/frv/kernel/time.c index 075db66..8d6558b 100644 --- a/arch/frv/kernel/time.c +++ b/arch/frv/kernel/time.c @@ -85,7 +85,7 @@ static irqreturn_t timer_interrupt(int irq, void *dummy, struct pt_regs * regs) * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be * called as close as possible to 500 ms before the new second starts. */ - if ((time_status & STA_UNSYNC) == 0 && + if (ntp_synced() && xtime.tv_sec > last_rtc_update + 660 && (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 && (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2 @@ -216,10 +216,7 @@ int do_settimeofday(struct timespec *tv) set_normalized_timespec(&xtime, sec, nsec); set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); clock_was_set(); return 0; diff --git a/arch/h8300/kernel/time.c b/arch/h8300/kernel/time.c index 8a60021..af8c5d2 100644 --- a/arch/h8300/kernel/time.c +++ b/arch/h8300/kernel/time.c @@ -116,10 +116,7 @@ int do_settimeofday(struct timespec *tv) xtime.tv_sec = tv->tv_sec; xtime.tv_nsec = tv->tv_nsec; - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); clock_was_set(); return 0; diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index 3b3b017..b22f003 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -37,6 +37,10 @@ config GENERIC_IOMAP bool default y +config ARCH_MAY_HAVE_PC_FDC + bool + default y + source "init/Kconfig" menu "Processor type and features" @@ -1208,7 +1212,6 @@ config PCI_DIRECT config PCI_MMCONFIG bool depends on PCI && ACPI && (PCI_GOMMCONFIG || PCI_GOANY) - select ACPI_BOOT default y source "drivers/pci/pcie/Kconfig" @@ -1318,6 +1321,11 @@ config GENERIC_IRQ_PROBE bool default y +config GENERIC_PENDING_IRQ + bool + depends on GENERIC_HARDIRQS && SMP + default y + config X86_SMP bool depends on SMP && !X86_VOYAGER diff --git a/arch/i386/boot/setup.S b/arch/i386/boot/setup.S index 8cb420f..ca668d9 100644 --- a/arch/i386/boot/setup.S +++ b/arch/i386/boot/setup.S @@ -82,7 +82,7 @@ start: # This is the setup header, and it must start at %cs:2 (old 0x9020:2) .ascii "HdrS" # header signature - .word 0x0203 # header version number (>= 0x0105) + .word 0x0204 # header version number (>= 0x0105) # or else old loadlin-1.5 will fail) realmode_swtch: .word 0, 0 # default_switch, SETUPSEG start_sys_seg: .word SYSSEG diff --git a/arch/i386/boot/tools/build.c b/arch/i386/boot/tools/build.c index 6835f6d..0579841 100644 --- a/arch/i386/boot/tools/build.c +++ b/arch/i386/boot/tools/build.c @@ -177,7 +177,9 @@ int main(int argc, char ** argv) die("Output: seek failed"); buf[0] = (sys_size & 0xff); buf[1] = ((sys_size >> 8) & 0xff); - if (write(1, buf, 2) != 2) + buf[2] = ((sys_size >> 16) & 0xff); + buf[3] = ((sys_size >> 24) & 0xff); + if (write(1, buf, 4) != 4) die("Write of image length failed"); return 0; /* Everything is OK */ diff --git a/arch/i386/defconfig b/arch/i386/defconfig index ca07b95..6a431b9 100644 --- a/arch/i386/defconfig +++ b/arch/i386/defconfig @@ -131,8 +131,6 @@ CONFIG_SOFTWARE_SUSPEND=y # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI=y -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_SLEEP_PROC_FS=y CONFIG_ACPI_AC=y @@ -144,10 +142,8 @@ CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_TOSHIBA is not set # CONFIG_ACPI_DEBUG is not set -CONFIG_ACPI_BUS=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y # CONFIG_X86_PM_TIMER is not set diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile index 64682a0..f10de0f 100644 --- a/arch/i386/kernel/Makefile +++ b/arch/i386/kernel/Makefile @@ -11,7 +11,7 @@ obj-y := process.o semaphore.o signal.o entry.o traps.o irq.o vm86.o \ obj-y += cpu/ obj-y += timers/ -obj-$(CONFIG_ACPI_BOOT) += acpi/ +obj-$(CONFIG_ACPI) += acpi/ obj-$(CONFIG_X86_BIOS_REBOOT) += reboot.o obj-$(CONFIG_MCA) += mca.o obj-$(CONFIG_X86_MSR) += msr.o diff --git a/arch/i386/kernel/acpi/Makefile b/arch/i386/kernel/acpi/Makefile index 5e291a2..267ca48 100644 --- a/arch/i386/kernel/acpi/Makefile +++ b/arch/i386/kernel/acpi/Makefile @@ -1,4 +1,4 @@ -obj-$(CONFIG_ACPI_BOOT) := boot.o +obj-y := boot.o obj-$(CONFIG_X86_IO_APIC) += earlyquirk.o obj-$(CONFIG_ACPI_SLEEP) += sleep.o wakeup.o diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c index 34ee500..a63351c 100644 --- a/arch/i386/kernel/acpi/boot.c +++ b/arch/i386/kernel/acpi/boot.c @@ -40,19 +40,25 @@ #ifdef CONFIG_X86_64 -static inline void acpi_madt_oem_check(char *oem_id, char *oem_table_id) { } +static inline void acpi_madt_oem_check(char *oem_id, char *oem_table_id) +{ +} extern void __init clustered_apic_check(void); -static inline int ioapic_setup_disabled(void) { return 0; } +static inline int ioapic_setup_disabled(void) +{ + return 0; +} + #include <asm/proto.h> -#else /* X86 */ +#else /* X86 */ #ifdef CONFIG_X86_LOCAL_APIC #include <mach_apic.h> #include <mach_mpparse.h> -#endif /* CONFIG_X86_LOCAL_APIC */ +#endif /* CONFIG_X86_LOCAL_APIC */ -#endif /* X86 */ +#endif /* X86 */ #define BAD_MADT_ENTRY(entry, end) ( \ (!entry) || (unsigned long)entry + sizeof(*entry) > end || \ @@ -60,13 +66,8 @@ static inline int ioapic_setup_disabled(void) { return 0; } #define PREFIX "ACPI: " -#ifdef CONFIG_ACPI_PCI int acpi_noirq __initdata; /* skip ACPI IRQ initialization */ -int acpi_pci_disabled __initdata; /* skip ACPI PCI scan and IRQ initialization */ -#else -int acpi_noirq __initdata = 1; -int acpi_pci_disabled __initdata = 1; -#endif +int acpi_pci_disabled __initdata; /* skip ACPI PCI scan and IRQ initialization */ int acpi_ht __initdata = 1; /* enable HT */ int acpi_lapic; @@ -88,7 +89,7 @@ static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE; #define MAX_MADT_ENTRIES 256 u8 x86_acpiid_to_apicid[MAX_MADT_ENTRIES] = - { [0 ... MAX_MADT_ENTRIES-1] = 0xff }; + {[0 ... MAX_MADT_ENTRIES - 1] = 0xff }; EXPORT_SYMBOL(x86_acpiid_to_apicid); /* -------------------------------------------------------------------------- @@ -99,7 +100,7 @@ EXPORT_SYMBOL(x86_acpiid_to_apicid); * The default interrupt routing model is PIC (8259). This gets * overriden if IOAPICs are enumerated (below). */ -enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_PIC; +enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_PIC; #ifdef CONFIG_X86_64 @@ -107,7 +108,7 @@ enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_PIC; char *__acpi_map_table(unsigned long phys_addr, unsigned long size) { if (!phys_addr || !size) - return NULL; + return NULL; if (phys_addr < (end_pfn_map << PAGE_SHIFT)) return __va(phys_addr); @@ -134,8 +135,8 @@ char *__acpi_map_table(unsigned long phys, unsigned long size) unsigned long base, offset, mapped_size; int idx; - if (phys + size < 8*1024*1024) - return __va(phys); + if (phys + size < 8 * 1024 * 1024) + return __va(phys); offset = phys & (PAGE_SIZE - 1); mapped_size = PAGE_SIZE - offset; @@ -154,7 +155,7 @@ char *__acpi_map_table(unsigned long phys, unsigned long size) mapped_size += PAGE_SIZE; } - return ((unsigned char *) base + offset); + return ((unsigned char *)base + offset); } #endif @@ -172,7 +173,7 @@ int __init acpi_parse_mcfg(unsigned long phys_addr, unsigned long size) if (!phys_addr || !size) return -EINVAL; - mcfg = (struct acpi_table_mcfg *) __acpi_map_table(phys_addr, size); + mcfg = (struct acpi_table_mcfg *)__acpi_map_table(phys_addr, size); if (!mcfg) { printk(KERN_WARNING PREFIX "Unable to map MCFG\n"); return -ENODEV; @@ -209,20 +210,17 @@ int __init acpi_parse_mcfg(unsigned long phys_addr, unsigned long size) return 0; } -#endif /* CONFIG_PCI_MMCONFIG */ +#endif /* CONFIG_PCI_MMCONFIG */ #ifdef CONFIG_X86_LOCAL_APIC -static int __init -acpi_parse_madt ( - unsigned long phys_addr, - unsigned long size) +static int __init acpi_parse_madt(unsigned long phys_addr, unsigned long size) { - struct acpi_table_madt *madt = NULL; + struct acpi_table_madt *madt = NULL; if (!phys_addr || !size) return -EINVAL; - madt = (struct acpi_table_madt *) __acpi_map_table(phys_addr, size); + madt = (struct acpi_table_madt *)__acpi_map_table(phys_addr, size); if (!madt) { printk(KERN_WARNING PREFIX "Unable to map MADT\n"); return -ENODEV; @@ -232,22 +230,20 @@ acpi_parse_madt ( acpi_lapic_addr = (u64) madt->lapic_address; printk(KERN_DEBUG PREFIX "Local APIC address 0x%08x\n", - madt->lapic_address); + madt->lapic_address); } acpi_madt_oem_check(madt->header.oem_id, madt->header.oem_table_id); - + return 0; } - static int __init -acpi_parse_lapic ( - acpi_table_entry_header *header, const unsigned long end) +acpi_parse_lapic(acpi_table_entry_header * header, const unsigned long end) { - struct acpi_table_lapic *processor = NULL; + struct acpi_table_lapic *processor = NULL; - processor = (struct acpi_table_lapic*) header; + processor = (struct acpi_table_lapic *)header; if (BAD_MADT_ENTRY(processor, end)) return -EINVAL; @@ -260,20 +256,19 @@ acpi_parse_lapic ( x86_acpiid_to_apicid[processor->acpi_id] = processor->id; - mp_register_lapic ( - processor->id, /* APIC ID */ - processor->flags.enabled); /* Enabled? */ + mp_register_lapic(processor->id, /* APIC ID */ + processor->flags.enabled); /* Enabled? */ return 0; } static int __init -acpi_parse_lapic_addr_ovr ( - acpi_table_entry_header *header, const unsigned long end) +acpi_parse_lapic_addr_ovr(acpi_table_entry_header * header, + const unsigned long end) { struct acpi_table_lapic_addr_ovr *lapic_addr_ovr = NULL; - lapic_addr_ovr = (struct acpi_table_lapic_addr_ovr*) header; + lapic_addr_ovr = (struct acpi_table_lapic_addr_ovr *)header; if (BAD_MADT_ENTRY(lapic_addr_ovr, end)) return -EINVAL; @@ -284,12 +279,11 @@ acpi_parse_lapic_addr_ovr ( } static int __init -acpi_parse_lapic_nmi ( - acpi_table_entry_header *header, const unsigned long end) +acpi_parse_lapic_nmi(acpi_table_entry_header * header, const unsigned long end) { struct acpi_table_lapic_nmi *lapic_nmi = NULL; - lapic_nmi = (struct acpi_table_lapic_nmi*) header; + lapic_nmi = (struct acpi_table_lapic_nmi *)header; if (BAD_MADT_ENTRY(lapic_nmi, end)) return -EINVAL; @@ -302,37 +296,32 @@ acpi_parse_lapic_nmi ( return 0; } +#endif /*CONFIG_X86_LOCAL_APIC */ -#endif /*CONFIG_X86_LOCAL_APIC*/ - -#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_ACPI_INTERPRETER) +#ifdef CONFIG_X86_IO_APIC static int __init -acpi_parse_ioapic ( - acpi_table_entry_header *header, const unsigned long end) +acpi_parse_ioapic(acpi_table_entry_header * header, const unsigned long end) { struct acpi_table_ioapic *ioapic = NULL; - ioapic = (struct acpi_table_ioapic*) header; + ioapic = (struct acpi_table_ioapic *)header; if (BAD_MADT_ENTRY(ioapic, end)) return -EINVAL; - + acpi_table_print_madt_entry(header); - mp_register_ioapic ( - ioapic->id, - ioapic->address, - ioapic->global_irq_base); - + mp_register_ioapic(ioapic->id, + ioapic->address, ioapic->global_irq_base); + return 0; } /* * Parse Interrupt Source Override for the ACPI SCI */ -static void -acpi_sci_ioapic_setup(u32 gsi, u16 polarity, u16 trigger) +static void acpi_sci_ioapic_setup(u32 gsi, u16 polarity, u16 trigger) { if (trigger == 0) /* compatible SCI trigger is level */ trigger = 3; @@ -348,7 +337,7 @@ acpi_sci_ioapic_setup(u32 gsi, u16 polarity, u16 trigger) polarity = acpi_sci_flags.polarity; /* - * mp_config_acpi_legacy_irqs() already setup IRQs < 16 + * mp_config_acpi_legacy_irqs() already setup IRQs < 16 * If GSI is < 16, this will update its flags, * else it will create a new mp_irqs[] entry. */ @@ -363,12 +352,12 @@ acpi_sci_ioapic_setup(u32 gsi, u16 polarity, u16 trigger) } static int __init -acpi_parse_int_src_ovr ( - acpi_table_entry_header *header, const unsigned long end) +acpi_parse_int_src_ovr(acpi_table_entry_header * header, + const unsigned long end) { struct acpi_table_int_src_ovr *intsrc = NULL; - intsrc = (struct acpi_table_int_src_ovr*) header; + intsrc = (struct acpi_table_int_src_ovr *)header; if (BAD_MADT_ENTRY(intsrc, end)) return -EINVAL; @@ -377,33 +366,30 @@ acpi_parse_int_src_ovr ( if (intsrc->bus_irq == acpi_fadt.sci_int) { acpi_sci_ioapic_setup(intsrc->global_irq, - intsrc->flags.polarity, intsrc->flags.trigger); + intsrc->flags.polarity, + intsrc->flags.trigger); return 0; } if (acpi_skip_timer_override && - intsrc->bus_irq == 0 && intsrc->global_irq == 2) { - printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n"); - return 0; + intsrc->bus_irq == 0 && intsrc->global_irq == 2) { + printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n"); + return 0; } - mp_override_legacy_irq ( - intsrc->bus_irq, - intsrc->flags.polarity, - intsrc->flags.trigger, - intsrc->global_irq); + mp_override_legacy_irq(intsrc->bus_irq, + intsrc->flags.polarity, + intsrc->flags.trigger, intsrc->global_irq); return 0; } - static int __init -acpi_parse_nmi_src ( - acpi_table_entry_header *header, const unsigned long end) +acpi_parse_nmi_src(acpi_table_entry_header * header, const unsigned long end) { struct acpi_table_nmi_src *nmi_src = NULL; - nmi_src = (struct acpi_table_nmi_src*) header; + nmi_src = (struct acpi_table_nmi_src *)header; if (BAD_MADT_ENTRY(nmi_src, end)) return -EINVAL; @@ -415,9 +401,7 @@ acpi_parse_nmi_src ( return 0; } -#endif /* CONFIG_X86_IO_APIC */ - -#ifdef CONFIG_ACPI_BUS +#endif /* CONFIG_X86_IO_APIC */ /* * acpi_pic_sci_set_trigger() @@ -433,8 +417,7 @@ acpi_parse_nmi_src ( * ECLR2 is IRQ's 8-15 (IRQ 8, 13 must be 0) */ -void __init -acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger) +void __init acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger) { unsigned int mask = 1 << irq; unsigned int old, new; @@ -454,10 +437,10 @@ acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger) * routing tables.. */ switch (trigger) { - case 1: /* Edge - clear */ + case 1: /* Edge - clear */ new &= ~mask; break; - case 3: /* Level - set */ + case 3: /* Level - set */ new |= mask; break; } @@ -470,21 +453,22 @@ acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger) outb(new >> 8, 0x4d1); } - -#endif /* CONFIG_ACPI_BUS */ - int acpi_gsi_to_irq(u32 gsi, unsigned int *irq) { #ifdef CONFIG_X86_IO_APIC if (use_pci_vector() && !platform_legacy_irq(gsi)) - *irq = IO_APIC_VECTOR(gsi); + *irq = IO_APIC_VECTOR(gsi); else #endif *irq = gsi; return 0; } -unsigned int acpi_register_gsi(u32 gsi, int edge_level, int active_high_low) +/* + * success: return IRQ number (>=0) + * failure: return < 0 + */ +int acpi_register_gsi(u32 gsi, int edge_level, int active_high_low) { unsigned int irq; unsigned int plat_gsi = gsi; @@ -497,7 +481,7 @@ unsigned int acpi_register_gsi(u32 gsi, int edge_level, int active_high_low) extern void eisa_set_level_irq(unsigned int irq); if (edge_level == ACPI_LEVEL_SENSITIVE) - eisa_set_level_irq(gsi); + eisa_set_level_irq(gsi); } #endif @@ -509,60 +493,58 @@ unsigned int acpi_register_gsi(u32 gsi, int edge_level, int active_high_low) acpi_gsi_to_irq(plat_gsi, &irq); return irq; } + EXPORT_SYMBOL(acpi_register_gsi); /* * ACPI based hotplug support for CPU */ #ifdef CONFIG_ACPI_HOTPLUG_CPU -int -acpi_map_lsapic(acpi_handle handle, int *pcpu) +int acpi_map_lsapic(acpi_handle handle, int *pcpu) { /* TBD */ return -EINVAL; } -EXPORT_SYMBOL(acpi_map_lsapic); +EXPORT_SYMBOL(acpi_map_lsapic); -int -acpi_unmap_lsapic(int cpu) +int acpi_unmap_lsapic(int cpu) { /* TBD */ return -EINVAL; } + EXPORT_SYMBOL(acpi_unmap_lsapic); -#endif /* CONFIG_ACPI_HOTPLUG_CPU */ +#endif /* CONFIG_ACPI_HOTPLUG_CPU */ -int -acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base) +int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base) { /* TBD */ return -EINVAL; } + EXPORT_SYMBOL(acpi_register_ioapic); -int -acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base) +int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base) { /* TBD */ return -EINVAL; } + EXPORT_SYMBOL(acpi_unregister_ioapic); static unsigned long __init -acpi_scan_rsdp ( - unsigned long start, - unsigned long length) +acpi_scan_rsdp(unsigned long start, unsigned long length) { - unsigned long offset = 0; - unsigned long sig_len = sizeof("RSD PTR ") - 1; + unsigned long offset = 0; + unsigned long sig_len = sizeof("RSD PTR ") - 1; /* * Scan all 16-byte boundaries of the physical memory region for the * RSDP signature. */ for (offset = 0; offset < length; offset += 16) { - if (strncmp((char *) (start + offset), "RSD PTR ", sig_len)) + if (strncmp((char *)(start + offset), "RSD PTR ", sig_len)) continue; return (start + offset); } @@ -575,20 +557,19 @@ static int __init acpi_parse_sbf(unsigned long phys_addr, unsigned long size) struct acpi_table_sbf *sb; if (!phys_addr || !size) - return -EINVAL; + return -EINVAL; - sb = (struct acpi_table_sbf *) __acpi_map_table(phys_addr, size); + sb = (struct acpi_table_sbf *)__acpi_map_table(phys_addr, size); if (!sb) { printk(KERN_WARNING PREFIX "Unable to map SBF\n"); return -ENODEV; } - sbf_port = sb->sbf_cmos; /* Save CMOS port */ + sbf_port = sb->sbf_cmos; /* Save CMOS port */ return 0; } - #ifdef CONFIG_HPET_TIMER static int __init acpi_parse_hpet(unsigned long phys, unsigned long size) @@ -598,7 +579,7 @@ static int __init acpi_parse_hpet(unsigned long phys, unsigned long size) if (!phys || !size) return -EINVAL; - hpet_tbl = (struct acpi_table_hpet *) __acpi_map_table(phys, size); + hpet_tbl = (struct acpi_table_hpet *)__acpi_map_table(phys, size); if (!hpet_tbl) { printk(KERN_WARNING PREFIX "Unable to map HPET\n"); return -ENODEV; @@ -609,22 +590,21 @@ static int __init acpi_parse_hpet(unsigned long phys, unsigned long size) "memory.\n"); return -1; } - #ifdef CONFIG_X86_64 - vxtime.hpet_address = hpet_tbl->addr.addrl | - ((long) hpet_tbl->addr.addrh << 32); + vxtime.hpet_address = hpet_tbl->addr.addrl | + ((long)hpet_tbl->addr.addrh << 32); - printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n", - hpet_tbl->id, vxtime.hpet_address); -#else /* X86 */ + printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n", + hpet_tbl->id, vxtime.hpet_address); +#else /* X86 */ { extern unsigned long hpet_address; hpet_address = hpet_tbl->addr.addrl; printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n", - hpet_tbl->id, hpet_address); + hpet_tbl->id, hpet_address); } -#endif /* X86 */ +#endif /* X86 */ return 0; } @@ -640,28 +620,25 @@ static int __init acpi_parse_fadt(unsigned long phys, unsigned long size) { struct fadt_descriptor_rev2 *fadt = NULL; - fadt = (struct fadt_descriptor_rev2*) __acpi_map_table(phys,size); - if(!fadt) { + fadt = (struct fadt_descriptor_rev2 *)__acpi_map_table(phys, size); + if (!fadt) { printk(KERN_WARNING PREFIX "Unable to map FADT\n"); return 0; } - -#ifdef CONFIG_ACPI_INTERPRETER /* initialize sci_int early for INT_SRC_OVR MADT parsing */ acpi_fadt.sci_int = fadt->sci_int; -#endif -#ifdef CONFIG_ACPI_BUS /* initialize rev and apic_phys_dest_mode for x86_64 genapic */ acpi_fadt.revision = fadt->revision; - acpi_fadt.force_apic_physical_destination_mode = fadt->force_apic_physical_destination_mode; -#endif + acpi_fadt.force_apic_physical_destination_mode = + fadt->force_apic_physical_destination_mode; #ifdef CONFIG_X86_PM_TIMER /* detect the location of the ACPI PM Timer */ if (fadt->revision >= FADT2_REVISION_ID) { /* FADT rev. 2 */ - if (fadt->xpm_tmr_blk.address_space_id != ACPI_ADR_SPACE_SYSTEM_IO) + if (fadt->xpm_tmr_blk.address_space_id != + ACPI_ADR_SPACE_SYSTEM_IO) return 0; pmtmr_ioport = fadt->xpm_tmr_blk.address; @@ -670,16 +647,15 @@ static int __init acpi_parse_fadt(unsigned long phys, unsigned long size) pmtmr_ioport = fadt->V1_pm_tmr_blk; } if (pmtmr_ioport) - printk(KERN_INFO PREFIX "PM-Timer IO Port: %#x\n", pmtmr_ioport); + printk(KERN_INFO PREFIX "PM-Timer IO Port: %#x\n", + pmtmr_ioport); #endif return 0; } - -unsigned long __init -acpi_find_rsdp (void) +unsigned long __init acpi_find_rsdp(void) { - unsigned long rsdp_phys = 0; + unsigned long rsdp_phys = 0; if (efi_enabled) { if (efi.acpi20) @@ -691,9 +667,9 @@ acpi_find_rsdp (void) * Scan memory looking for the RSDP signature. First search EBDA (low * memory) paragraphs and then search upper memory (E0000-FFFFF). */ - rsdp_phys = acpi_scan_rsdp (0, 0x400); + rsdp_phys = acpi_scan_rsdp(0, 0x400); if (!rsdp_phys) - rsdp_phys = acpi_scan_rsdp (0xE0000, 0x20000); + rsdp_phys = acpi_scan_rsdp(0xE0000, 0x20000); return rsdp_phys; } @@ -703,8 +679,7 @@ acpi_find_rsdp (void) * Parse LAPIC entries in MADT * returns 0 on success, < 0 on error */ -static int __init -acpi_parse_madt_lapic_entries(void) +static int __init acpi_parse_madt_lapic_entries(void) { int count; @@ -713,28 +688,31 @@ acpi_parse_madt_lapic_entries(void) * and (optionally) overriden by a LAPIC_ADDR_OVR entry (64-bit value). */ - count = acpi_table_parse_madt(ACPI_MADT_LAPIC_ADDR_OVR, acpi_parse_lapic_addr_ovr, 0); + count = + acpi_table_parse_madt(ACPI_MADT_LAPIC_ADDR_OVR, + acpi_parse_lapic_addr_ovr, 0); if (count < 0) { - printk(KERN_ERR PREFIX "Error parsing LAPIC address override entry\n"); + printk(KERN_ERR PREFIX + "Error parsing LAPIC address override entry\n"); return count; } mp_register_lapic_address(acpi_lapic_addr); count = acpi_table_parse_madt(ACPI_MADT_LAPIC, acpi_parse_lapic, - MAX_APICS); - if (!count) { + MAX_APICS); + if (!count) { printk(KERN_ERR PREFIX "No LAPIC entries present\n"); /* TBD: Cleanup to allow fallback to MPS */ return -ENODEV; - } - else if (count < 0) { + } else if (count < 0) { printk(KERN_ERR PREFIX "Error parsing LAPIC entry\n"); /* TBD: Cleanup to allow fallback to MPS */ return count; } - count = acpi_table_parse_madt(ACPI_MADT_LAPIC_NMI, acpi_parse_lapic_nmi, 0); + count = + acpi_table_parse_madt(ACPI_MADT_LAPIC_NMI, acpi_parse_lapic_nmi, 0); if (count < 0) { printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n"); /* TBD: Cleanup to allow fallback to MPS */ @@ -742,15 +720,14 @@ acpi_parse_madt_lapic_entries(void) } return 0; } -#endif /* CONFIG_X86_LOCAL_APIC */ +#endif /* CONFIG_X86_LOCAL_APIC */ -#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_ACPI_INTERPRETER) +#ifdef CONFIG_X86_IO_APIC /* * Parse IOAPIC related entries in MADT * returns 0 on success, < 0 on error */ -static int __init -acpi_parse_madt_ioapic_entries(void) +static int __init acpi_parse_madt_ioapic_entries(void) { int count; @@ -762,30 +739,34 @@ acpi_parse_madt_ioapic_entries(void) */ if (acpi_disabled || acpi_noirq) { return -ENODEV; - } + } /* - * if "noapic" boot option, don't look for IO-APICs + * if "noapic" boot option, don't look for IO-APICs */ if (skip_ioapic_setup) { printk(KERN_INFO PREFIX "Skipping IOAPIC probe " - "due to 'noapic' option.\n"); + "due to 'noapic' option.\n"); return -ENODEV; } - count = acpi_table_parse_madt(ACPI_MADT_IOAPIC, acpi_parse_ioapic, MAX_IO_APICS); + count = + acpi_table_parse_madt(ACPI_MADT_IOAPIC, acpi_parse_ioapic, + MAX_IO_APICS); if (!count) { printk(KERN_ERR PREFIX "No IOAPIC entries present\n"); return -ENODEV; - } - else if (count < 0) { + } else if (count < 0) { printk(KERN_ERR PREFIX "Error parsing IOAPIC entry\n"); return count; } - count = acpi_table_parse_madt(ACPI_MADT_INT_SRC_OVR, acpi_parse_int_src_ovr, NR_IRQ_VECTORS); + count = + acpi_table_parse_madt(ACPI_MADT_INT_SRC_OVR, acpi_parse_int_src_ovr, + NR_IRQ_VECTORS); if (count < 0) { - printk(KERN_ERR PREFIX "Error parsing interrupt source overrides entry\n"); + printk(KERN_ERR PREFIX + "Error parsing interrupt source overrides entry\n"); /* TBD: Cleanup to allow fallback to MPS */ return count; } @@ -800,7 +781,9 @@ acpi_parse_madt_ioapic_entries(void) /* Fill in identity legacy mapings where no override */ mp_config_acpi_legacy_irqs(); - count = acpi_table_parse_madt(ACPI_MADT_NMI_SRC, acpi_parse_nmi_src, NR_IRQ_VECTORS); + count = + acpi_table_parse_madt(ACPI_MADT_NMI_SRC, acpi_parse_nmi_src, + NR_IRQ_VECTORS); if (count < 0) { printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n"); /* TBD: Cleanup to allow fallback to MPS */ @@ -814,11 +797,9 @@ static inline int acpi_parse_madt_ioapic_entries(void) { return -1; } -#endif /* !(CONFIG_X86_IO_APIC && CONFIG_ACPI_INTERPRETER) */ +#endif /* !CONFIG_X86_IO_APIC */ - -static void __init -acpi_process_madt(void) +static void __init acpi_process_madt(void) { #ifdef CONFIG_X86_LOCAL_APIC int count, error; @@ -853,7 +834,8 @@ acpi_process_madt(void) /* * Dell Precision Workstation 410, 610 come here. */ - printk(KERN_ERR PREFIX "Invalid BIOS MADT, disabling ACPI\n"); + printk(KERN_ERR PREFIX + "Invalid BIOS MADT, disabling ACPI\n"); disable_acpi(); } } @@ -865,7 +847,6 @@ extern int acpi_force; #ifdef __i386__ -#ifdef CONFIG_ACPI_PCI static int __init disable_acpi_irq(struct dmi_system_id *d) { if (!acpi_force) { @@ -885,12 +866,11 @@ static int __init disable_acpi_pci(struct dmi_system_id *d) } return 0; } -#endif static int __init dmi_disable_acpi(struct dmi_system_id *d) { if (!acpi_force) { - printk(KERN_NOTICE "%s detected: acpi off\n",d->ident); + printk(KERN_NOTICE "%s detected: acpi off\n", d->ident); disable_acpi(); } else { printk(KERN_NOTICE @@ -905,7 +885,8 @@ static int __init dmi_disable_acpi(struct dmi_system_id *d) static int __init force_acpi_ht(struct dmi_system_id *d) { if (!acpi_force) { - printk(KERN_NOTICE "%s detected: force use of acpi=ht\n", d->ident); + printk(KERN_NOTICE "%s detected: force use of acpi=ht\n", + d->ident); disable_acpi(); acpi_ht = 1; } else { @@ -924,155 +905,155 @@ static struct dmi_system_id __initdata acpi_dmi_table[] = { * Boxes that need ACPI disabled */ { - .callback = dmi_disable_acpi, - .ident = "IBM Thinkpad", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), - DMI_MATCH(DMI_BOARD_NAME, "2629H1G"), - }, - }, + .callback = dmi_disable_acpi, + .ident = "IBM Thinkpad", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), + DMI_MATCH(DMI_BOARD_NAME, "2629H1G"), + }, + }, /* * Boxes that need acpi=ht */ { - .callback = force_acpi_ht, - .ident = "FSC Primergy T850", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), - DMI_MATCH(DMI_PRODUCT_NAME, "PRIMERGY T850"), - }, - }, + .callback = force_acpi_ht, + .ident = "FSC Primergy T850", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "PRIMERGY T850"), + }, + }, { - .callback = force_acpi_ht, - .ident = "DELL GX240", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "Dell Computer Corporation"), - DMI_MATCH(DMI_BOARD_NAME, "OptiPlex GX240"), - }, - }, + .callback = force_acpi_ht, + .ident = "DELL GX240", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Dell Computer Corporation"), + DMI_MATCH(DMI_BOARD_NAME, "OptiPlex GX240"), + }, + }, { - .callback = force_acpi_ht, - .ident = "HP VISUALIZE NT Workstation", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"), - DMI_MATCH(DMI_PRODUCT_NAME, "HP VISUALIZE NT Workstation"), - }, - }, + .callback = force_acpi_ht, + .ident = "HP VISUALIZE NT Workstation", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP VISUALIZE NT Workstation"), + }, + }, { - .callback = force_acpi_ht, - .ident = "Compaq Workstation W8000", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Compaq"), - DMI_MATCH(DMI_PRODUCT_NAME, "Workstation W8000"), - }, - }, + .callback = force_acpi_ht, + .ident = "Compaq Workstation W8000", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Compaq"), + DMI_MATCH(DMI_PRODUCT_NAME, "Workstation W8000"), + }, + }, { - .callback = force_acpi_ht, - .ident = "ASUS P4B266", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), - DMI_MATCH(DMI_BOARD_NAME, "P4B266"), - }, - }, + .callback = force_acpi_ht, + .ident = "ASUS P4B266", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "P4B266"), + }, + }, { - .callback = force_acpi_ht, - .ident = "ASUS P2B-DS", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), - DMI_MATCH(DMI_BOARD_NAME, "P2B-DS"), - }, - }, + .callback = force_acpi_ht, + .ident = "ASUS P2B-DS", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "P2B-DS"), + }, + }, { - .callback = force_acpi_ht, - .ident = "ASUS CUR-DLS", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), - DMI_MATCH(DMI_BOARD_NAME, "CUR-DLS"), - }, - }, + .callback = force_acpi_ht, + .ident = "ASUS CUR-DLS", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "CUR-DLS"), + }, + }, { - .callback = force_acpi_ht, - .ident = "ABIT i440BX-W83977", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "ABIT <http://www.abit.com>"), - DMI_MATCH(DMI_BOARD_NAME, "i440BX-W83977 (BP6)"), - }, - }, + .callback = force_acpi_ht, + .ident = "ABIT i440BX-W83977", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ABIT <http://www.abit.com>"), + DMI_MATCH(DMI_BOARD_NAME, "i440BX-W83977 (BP6)"), + }, + }, { - .callback = force_acpi_ht, - .ident = "IBM Bladecenter", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), - DMI_MATCH(DMI_BOARD_NAME, "IBM eServer BladeCenter HS20"), - }, - }, + .callback = force_acpi_ht, + .ident = "IBM Bladecenter", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), + DMI_MATCH(DMI_BOARD_NAME, "IBM eServer BladeCenter HS20"), + }, + }, { - .callback = force_acpi_ht, - .ident = "IBM eServer xSeries 360", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), - DMI_MATCH(DMI_BOARD_NAME, "eServer xSeries 360"), - }, - }, + .callback = force_acpi_ht, + .ident = "IBM eServer xSeries 360", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), + DMI_MATCH(DMI_BOARD_NAME, "eServer xSeries 360"), + }, + }, { - .callback = force_acpi_ht, - .ident = "IBM eserver xSeries 330", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), - DMI_MATCH(DMI_BOARD_NAME, "eserver xSeries 330"), - }, - }, + .callback = force_acpi_ht, + .ident = "IBM eserver xSeries 330", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), + DMI_MATCH(DMI_BOARD_NAME, "eserver xSeries 330"), + }, + }, { - .callback = force_acpi_ht, - .ident = "IBM eserver xSeries 440", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), - DMI_MATCH(DMI_PRODUCT_NAME, "eserver xSeries 440"), - }, - }, - -#ifdef CONFIG_ACPI_PCI + .callback = force_acpi_ht, + .ident = "IBM eserver xSeries 440", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), + DMI_MATCH(DMI_PRODUCT_NAME, "eserver xSeries 440"), + }, + }, + /* * Boxes that need ACPI PCI IRQ routing disabled */ { - .callback = disable_acpi_irq, - .ident = "ASUS A7V", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC"), - DMI_MATCH(DMI_BOARD_NAME, "<A7V>"), - /* newer BIOS, Revision 1011, does work */ - DMI_MATCH(DMI_BIOS_VERSION, "ASUS A7V ACPI BIOS Revision 1007"), - }, - }, + .callback = disable_acpi_irq, + .ident = "ASUS A7V", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC"), + DMI_MATCH(DMI_BOARD_NAME, "<A7V>"), + /* newer BIOS, Revision 1011, does work */ + DMI_MATCH(DMI_BIOS_VERSION, + "ASUS A7V ACPI BIOS Revision 1007"), + }, + }, /* * Boxes that need ACPI PCI IRQ routing and PCI scan disabled */ - { /* _BBN 0 bug */ - .callback = disable_acpi_pci, - .ident = "ASUS PR-DLS", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), - DMI_MATCH(DMI_BOARD_NAME, "PR-DLS"), - DMI_MATCH(DMI_BIOS_VERSION, "ASUS PR-DLS ACPI BIOS Revision 1010"), - DMI_MATCH(DMI_BIOS_DATE, "03/21/2003") - }, - }, + { /* _BBN 0 bug */ + .callback = disable_acpi_pci, + .ident = "ASUS PR-DLS", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "PR-DLS"), + DMI_MATCH(DMI_BIOS_VERSION, + "ASUS PR-DLS ACPI BIOS Revision 1010"), + DMI_MATCH(DMI_BIOS_DATE, "03/21/2003") + }, + }, { - .callback = disable_acpi_pci, - .ident = "Acer TravelMate 36x Laptop", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Acer"), - DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"), - }, - }, -#endif - { } + .callback = disable_acpi_pci, + .ident = "Acer TravelMate 36x Laptop", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"), + }, + }, + {} }; -#endif /* __i386__ */ +#endif /* __i386__ */ /* * acpi_boot_table_init() and acpi_boot_init() @@ -1097,8 +1078,7 @@ static struct dmi_system_id __initdata acpi_dmi_table[] = { * !0: failure */ -int __init -acpi_boot_table_init(void) +int __init acpi_boot_table_init(void) { int error; @@ -1111,7 +1091,7 @@ acpi_boot_table_init(void) * One exception: acpi=ht continues far enough to enumerate LAPICs */ if (acpi_disabled && !acpi_ht) - return 1; + return 1; /* * Initialize the ACPI boot-time table parser. @@ -1121,7 +1101,6 @@ acpi_boot_table_init(void) disable_acpi(); return error; } - #ifdef __i386__ check_acpi_pci(); #endif @@ -1145,7 +1124,6 @@ acpi_boot_table_init(void) return 0; } - int __init acpi_boot_init(void) { /* @@ -1153,7 +1131,7 @@ int __init acpi_boot_init(void) * One exception: acpi=ht continues far enough to enumerate LAPICs */ if (acpi_disabled && !acpi_ht) - return 1; + return 1; acpi_table_parse(ACPI_BOOT, acpi_parse_sbf); @@ -1171,4 +1149,3 @@ int __init acpi_boot_init(void) return 0; } - diff --git a/arch/i386/kernel/acpi/earlyquirk.c b/arch/i386/kernel/acpi/earlyquirk.c index 726a5ca..f1b9d2a 100644 --- a/arch/i386/kernel/acpi/earlyquirk.c +++ b/arch/i386/kernel/acpi/earlyquirk.c @@ -8,44 +8,44 @@ #include <asm/pci-direct.h> #include <asm/acpi.h> -static int __init check_bridge(int vendor, int device) +static int __init check_bridge(int vendor, int device) { /* According to Nvidia all timer overrides are bogus. Just ignore them all. */ - if (vendor == PCI_VENDOR_ID_NVIDIA) { - acpi_skip_timer_override = 1; + if (vendor == PCI_VENDOR_ID_NVIDIA) { + acpi_skip_timer_override = 1; } return 0; } - -void __init check_acpi_pci(void) -{ - int num,slot,func; + +void __init check_acpi_pci(void) +{ + int num, slot, func; /* Assume the machine supports type 1. If not it will always read ffffffff and should not have any side effect. */ /* Poor man's PCI discovery */ - for (num = 0; num < 32; num++) { - for (slot = 0; slot < 32; slot++) { - for (func = 0; func < 8; func++) { + for (num = 0; num < 32; num++) { + for (slot = 0; slot < 32; slot++) { + for (func = 0; func < 8; func++) { u32 class; u32 vendor; - class = read_pci_config(num,slot,func, + class = read_pci_config(num, slot, func, PCI_CLASS_REVISION); if (class == 0xffffffff) - break; + break; if ((class >> 16) != PCI_CLASS_BRIDGE_PCI) - continue; - - vendor = read_pci_config(num, slot, func, + continue; + + vendor = read_pci_config(num, slot, func, PCI_VENDOR_ID); - - if (check_bridge(vendor&0xffff, vendor >> 16)) - return; - } - + + if (check_bridge(vendor & 0xffff, vendor >> 16)) + return; + } + } } } diff --git a/arch/i386/kernel/acpi/sleep.c b/arch/i386/kernel/acpi/sleep.c index c1af930..1cb2b18 100644 --- a/arch/i386/kernel/acpi/sleep.c +++ b/arch/i386/kernel/acpi/sleep.c @@ -20,12 +20,13 @@ extern void zap_low_mappings(void); extern unsigned long FASTCALL(acpi_copy_wakeup_routine(unsigned long)); -static void init_low_mapping(pgd_t *pgd, int pgd_limit) +static void init_low_mapping(pgd_t * pgd, int pgd_limit) { int pgd_ofs = 0; - while ((pgd_ofs < pgd_limit) && (pgd_ofs + USER_PTRS_PER_PGD < PTRS_PER_PGD)) { - set_pgd(pgd, *(pgd+USER_PTRS_PER_PGD)); + while ((pgd_ofs < pgd_limit) + && (pgd_ofs + USER_PTRS_PER_PGD < PTRS_PER_PGD)) { + set_pgd(pgd, *(pgd + USER_PTRS_PER_PGD)); pgd_ofs++, pgd++; } flush_tlb_all(); @@ -37,12 +38,13 @@ static void init_low_mapping(pgd_t *pgd, int pgd_limit) * Create an identity mapped page table and copy the wakeup routine to * low memory. */ -int acpi_save_state_mem (void) +int acpi_save_state_mem(void) { if (!acpi_wakeup_address) return 1; init_low_mapping(swapper_pg_dir, USER_PTRS_PER_PGD); - memcpy((void *) acpi_wakeup_address, &wakeup_start, &wakeup_end - &wakeup_start); + memcpy((void *)acpi_wakeup_address, &wakeup_start, + &wakeup_end - &wakeup_start); acpi_copy_wakeup_routine(acpi_wakeup_address); return 0; @@ -51,7 +53,7 @@ int acpi_save_state_mem (void) /* * acpi_restore_state - undo effects of acpi_save_state_mem */ -void acpi_restore_state_mem (void) +void acpi_restore_state_mem(void) { zap_low_mappings(); } @@ -67,7 +69,8 @@ void acpi_restore_state_mem (void) void __init acpi_reserve_bootmem(void) { if ((&wakeup_end - &wakeup_start) > PAGE_SIZE) { - printk(KERN_ERR "ACPI: Wakeup code way too big, S3 disabled.\n"); + printk(KERN_ERR + "ACPI: Wakeup code way too big, S3 disabled.\n"); return; } @@ -90,10 +93,8 @@ static int __init acpi_sleep_setup(char *str) return 1; } - __setup("acpi_sleep=", acpi_sleep_setup); - static __init int reset_videomode_after_s3(struct dmi_system_id *d) { acpi_video_flags |= 2; @@ -101,14 +102,14 @@ static __init int reset_videomode_after_s3(struct dmi_system_id *d) } static __initdata struct dmi_system_id acpisleep_dmi_table[] = { - { /* Reset video mode after returning from ACPI S3 sleep */ - .callback = reset_videomode_after_s3, - .ident = "Toshiba Satellite 4030cdt", - .matches = { - DMI_MATCH(DMI_PRODUCT_NAME, "S4030CDT/4.3"), - }, - }, - { } + { /* Reset video mode after returning from ACPI S3 sleep */ + .callback = reset_videomode_after_s3, + .ident = "Toshiba Satellite 4030cdt", + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "S4030CDT/4.3"), + }, + }, + {} }; static int __init acpisleep_dmi_init(void) diff --git a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c index 60a9e54..822c8ce 100644 --- a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -31,6 +31,7 @@ #include <linux/cpufreq.h> #include <linux/proc_fs.h> #include <linux/seq_file.h> +#include <linux/compiler.h> #include <asm/io.h> #include <asm/delay.h> #include <asm/uaccess.h> @@ -57,6 +58,8 @@ static struct cpufreq_acpi_io *acpi_io_data[NR_CPUS]; static struct cpufreq_driver acpi_cpufreq_driver; +static unsigned int acpi_pstate_strict; + static int acpi_processor_write_port( u16 port, @@ -163,34 +166,44 @@ acpi_processor_set_performance ( } /* - * Then we read the 'status_register' and compare the value with the - * target state's 'status' to make sure the transition was successful. - * Note that we'll poll for up to 1ms (100 cycles of 10us) before - * giving up. + * Assume the write went through when acpi_pstate_strict is not used. + * As read status_register is an expensive operation and there + * are no specific error cases where an IO port write will fail. */ - - port = data->acpi_data.status_register.address; - bit_width = data->acpi_data.status_register.bit_width; - - dprintk("Looking for 0x%08x from port 0x%04x\n", - (u32) data->acpi_data.states[state].status, port); - - for (i=0; i<100; i++) { - ret = acpi_processor_read_port(port, bit_width, &value); - if (ret) { - dprintk("Invalid port width 0x%04x\n", bit_width); - retval = ret; - goto migrate_end; + if (acpi_pstate_strict) { + /* Then we read the 'status_register' and compare the value + * with the target state's 'status' to make sure the + * transition was successful. + * Note that we'll poll for up to 1ms (100 cycles of 10us) + * before giving up. + */ + + port = data->acpi_data.status_register.address; + bit_width = data->acpi_data.status_register.bit_width; + + dprintk("Looking for 0x%08x from port 0x%04x\n", + (u32) data->acpi_data.states[state].status, port); + + for (i=0; i<100; i++) { + ret = acpi_processor_read_port(port, bit_width, &value); + if (ret) { + dprintk("Invalid port width 0x%04x\n", bit_width); + retval = ret; + goto migrate_end; + } + if (value == (u32) data->acpi_data.states[state].status) + break; + udelay(10); } - if (value == (u32) data->acpi_data.states[state].status) - break; - udelay(10); + } else { + i = 0; + value = (u32) data->acpi_data.states[state].status; } /* notify cpufreq */ cpufreq_notify_transition(&cpufreq_freqs, CPUFREQ_POSTCHANGE); - if (value != (u32) data->acpi_data.states[state].status) { + if (unlikely(value != (u32) data->acpi_data.states[state].status)) { unsigned int tmp = cpufreq_freqs.new; cpufreq_freqs.new = cpufreq_freqs.old; cpufreq_freqs.old = tmp; @@ -537,6 +550,8 @@ acpi_cpufreq_exit (void) return; } +module_param(acpi_pstate_strict, uint, 0644); +MODULE_PARM_DESC(acpi_pstate_strict, "value 0 or non-zero. non-zero -> strict ACPI checks are performed during frequency changes."); late_initcall(acpi_cpufreq_init); module_exit(acpi_cpufreq_exit); diff --git a/arch/i386/kernel/dmi_scan.c b/arch/i386/kernel/dmi_scan.c index a3cdf89..58516e2 100644 --- a/arch/i386/kernel/dmi_scan.c +++ b/arch/i386/kernel/dmi_scan.c @@ -6,32 +6,28 @@ #include <linux/bootmem.h> -struct dmi_header { - u8 type; - u8 length; - u16 handle; -}; - -#undef DMI_DEBUG - -#ifdef DMI_DEBUG -#define dmi_printk(x) printk x -#else -#define dmi_printk(x) -#endif - static char * __init dmi_string(struct dmi_header *dm, u8 s) { u8 *bp = ((u8 *) dm) + dm->length; + char *str = ""; - if (!s) - return ""; - s--; - while (s > 0 && *bp) { - bp += strlen(bp) + 1; + if (s) { s--; - } - return bp; + while (s > 0 && *bp) { + bp += strlen(bp) + 1; + s--; + } + + if (*bp != 0) { + str = alloc_bootmem(strlen(bp) + 1); + if (str != NULL) + strcpy(str, bp); + else + printk(KERN_ERR "dmi_string: out of memory.\n"); + } + } + + return str; } /* @@ -84,69 +80,76 @@ static int __init dmi_checksum(u8 *buf) return sum == 0; } -static int __init dmi_iterate(void (*decode)(struct dmi_header *)) +static char *dmi_ident[DMI_STRING_MAX]; +static LIST_HEAD(dmi_devices); + +/* + * Save a DMI string + */ +static void __init dmi_save_ident(struct dmi_header *dm, int slot, int string) { - u8 buf[15]; - char __iomem *p, *q; + char *p, *d = (char*) dm; - /* - * no iounmap() for that ioremap(); it would be a no-op, but it's - * so early in setup that sucker gets confused into doing what - * it shouldn't if we actually call it. - */ - p = ioremap(0xF0000, 0x10000); + if (dmi_ident[slot]) + return; + + p = dmi_string(dm, d[string]); if (p == NULL) - return -1; + return; - for (q = p; q < p + 0x10000; q += 16) { - memcpy_fromio(buf, q, 15); - if ((memcmp(buf, "_DMI_", 5) == 0) && dmi_checksum(buf)) { - u16 num = (buf[13] << 8) | buf[12]; - u16 len = (buf[7] << 8) | buf[6]; - u32 base = (buf[11] << 24) | (buf[10] << 16) | - (buf[9] << 8) | buf[8]; + dmi_ident[slot] = p; +} - /* - * DMI version 0.0 means that the real version is taken from - * the SMBIOS version, which we don't know at this point. - */ - if (buf[14] != 0) - printk(KERN_INFO "DMI %d.%d present.\n", - buf[14] >> 4, buf[14] & 0xF); - else - printk(KERN_INFO "DMI present.\n"); +static void __init dmi_save_devices(struct dmi_header *dm) +{ + int i, count = (dm->length - sizeof(struct dmi_header)) / 2; + struct dmi_device *dev; + + for (i = 0; i < count; i++) { + char *d = ((char *) dm) + (i * 2); - dmi_printk((KERN_INFO "%d structures occupying %d bytes.\n", - num, len)); - dmi_printk((KERN_INFO "DMI table at 0x%08X.\n", base)); + /* Skip disabled device */ + if ((*d & 0x80) == 0) + continue; - if (dmi_table(base,len, num, decode) == 0) - return 0; + dev = alloc_bootmem(sizeof(*dev)); + if (!dev) { + printk(KERN_ERR "dmi_save_devices: out of memory.\n"); + break; } + + dev->type = *d++ & 0x7f; + dev->name = dmi_string(dm, *d); + dev->device_data = NULL; + + list_add(&dev->list, &dmi_devices); } - return -1; } -static char *dmi_ident[DMI_STRING_MAX]; - -/* - * Save a DMI string - */ -static void __init dmi_save_ident(struct dmi_header *dm, int slot, int string) +static void __init dmi_save_ipmi_device(struct dmi_header *dm) { - char *d = (char*)dm; - char *p = dmi_string(dm, d[string]); + struct dmi_device *dev; + void * data; - if (p == NULL || *p == 0) + data = alloc_bootmem(dm->length); + if (data == NULL) { + printk(KERN_ERR "dmi_save_ipmi_device: out of memory.\n"); return; - if (dmi_ident[slot]) + } + + memcpy(data, dm, dm->length); + + dev = alloc_bootmem(sizeof(*dev)); + if (!dev) { + printk(KERN_ERR "dmi_save_ipmi_device: out of memory.\n"); return; + } - dmi_ident[slot] = alloc_bootmem(strlen(p) + 1); - if(dmi_ident[slot]) - strcpy(dmi_ident[slot], p); - else - printk(KERN_ERR "dmi_save_ident: out of memory.\n"); + dev->type = DMI_DEV_TYPE_IPMI; + dev->name = "IPMI controller"; + dev->device_data = data; + + list_add(&dev->list, &dmi_devices); } /* @@ -156,42 +159,69 @@ static void __init dmi_save_ident(struct dmi_header *dm, int slot, int string) */ static void __init dmi_decode(struct dmi_header *dm) { - u8 *data __attribute__((__unused__)) = (u8 *)dm; - switch(dm->type) { - case 0: - dmi_printk(("BIOS Vendor: %s\n", dmi_string(dm, data[4]))); + case 0: /* BIOS Information */ dmi_save_ident(dm, DMI_BIOS_VENDOR, 4); - dmi_printk(("BIOS Version: %s\n", dmi_string(dm, data[5]))); dmi_save_ident(dm, DMI_BIOS_VERSION, 5); - dmi_printk(("BIOS Release: %s\n", dmi_string(dm, data[8]))); dmi_save_ident(dm, DMI_BIOS_DATE, 8); break; - case 1: - dmi_printk(("System Vendor: %s\n", dmi_string(dm, data[4]))); + case 1: /* System Information */ dmi_save_ident(dm, DMI_SYS_VENDOR, 4); - dmi_printk(("Product Name: %s\n", dmi_string(dm, data[5]))); dmi_save_ident(dm, DMI_PRODUCT_NAME, 5); - dmi_printk(("Version: %s\n", dmi_string(dm, data[6]))); dmi_save_ident(dm, DMI_PRODUCT_VERSION, 6); - dmi_printk(("Serial Number: %s\n", dmi_string(dm, data[7]))); dmi_save_ident(dm, DMI_PRODUCT_SERIAL, 7); break; - case 2: - dmi_printk(("Board Vendor: %s\n", dmi_string(dm, data[4]))); + case 2: /* Base Board Information */ dmi_save_ident(dm, DMI_BOARD_VENDOR, 4); - dmi_printk(("Board Name: %s\n", dmi_string(dm, data[5]))); dmi_save_ident(dm, DMI_BOARD_NAME, 5); - dmi_printk(("Board Version: %s\n", dmi_string(dm, data[6]))); dmi_save_ident(dm, DMI_BOARD_VERSION, 6); break; + case 10: /* Onboard Devices Information */ + dmi_save_devices(dm); + break; + case 38: /* IPMI Device Information */ + dmi_save_ipmi_device(dm); } } void __init dmi_scan_machine(void) { - if (dmi_iterate(dmi_decode)) - printk(KERN_INFO "DMI not present.\n"); + u8 buf[15]; + char __iomem *p, *q; + + /* + * no iounmap() for that ioremap(); it would be a no-op, but it's + * so early in setup that sucker gets confused into doing what + * it shouldn't if we actually call it. + */ + p = ioremap(0xF0000, 0x10000); + if (p == NULL) + goto out; + + for (q = p; q < p + 0x10000; q += 16) { + memcpy_fromio(buf, q, 15); + if ((memcmp(buf, "_DMI_", 5) == 0) && dmi_checksum(buf)) { + u16 num = (buf[13] << 8) | buf[12]; + u16 len = (buf[7] << 8) | buf[6]; + u32 base = (buf[11] << 24) | (buf[10] << 16) | + (buf[9] << 8) | buf[8]; + + /* + * DMI version 0.0 means that the real version is taken from + * the SMBIOS version, which we don't know at this point. + */ + if (buf[14] != 0) + printk(KERN_INFO "DMI %d.%d present.\n", + buf[14] >> 4, buf[14] & 0xF); + else + printk(KERN_INFO "DMI present.\n"); + + if (dmi_table(base,len, num, dmi_decode) == 0) + return; + } + } + +out: printk(KERN_INFO "DMI not present.\n"); } @@ -218,9 +248,9 @@ int dmi_check_system(struct dmi_system_id *list) /* No match */ goto fail; } + count++; if (d->callback && d->callback(d)) break; - count++; fail: d++; } @@ -240,3 +270,32 @@ char *dmi_get_system_info(int field) return dmi_ident[field]; } EXPORT_SYMBOL(dmi_get_system_info); + +/** + * dmi_find_device - find onboard device by type/name + * @type: device type or %DMI_DEV_TYPE_ANY to match all device types + * @desc: device name string or %NULL to match all + * @from: previous device found in search, or %NULL for new search. + * + * Iterates through the list of known onboard devices. If a device is + * found with a matching @vendor and @device, a pointer to its device + * structure is returned. Otherwise, %NULL is returned. + * A new search is initiated by passing %NULL to the @from argument. + * If @from is not %NULL, searches continue from next device. + */ +struct dmi_device * dmi_find_device(int type, const char *name, + struct dmi_device *from) +{ + struct list_head *d, *head = from ? &from->list : &dmi_devices; + + for(d = head->next; d != &dmi_devices; d = d->next) { + struct dmi_device *dev = list_entry(d, struct dmi_device, list); + + if (((type == DMI_DEV_TYPE_ANY) || (dev->type == type)) && + ((name == NULL) || (strcmp(dev->name, name) == 0))) + return dev; + } + + return NULL; +} +EXPORT_SYMBOL(dmi_find_device); diff --git a/arch/i386/kernel/entry.S b/arch/i386/kernel/entry.S index abb9097..3aad038 100644 --- a/arch/i386/kernel/entry.S +++ b/arch/i386/kernel/entry.S @@ -507,7 +507,7 @@ label: \ pushl $__KERNEL_CS; \ pushl $sysenter_past_esp -ENTRY(debug) +KPROBE_ENTRY(debug) cmpl $sysenter_entry,(%esp) jne debug_stack_correct FIX_STACK(12, debug_stack_correct, debug_esp_fix_insn) @@ -518,7 +518,7 @@ debug_stack_correct: movl %esp,%eax # pt_regs pointer call do_debug jmp ret_from_exception - + .previous .text /* * NMI is doubly nasty. It can happen _while_ we're handling * a debug fault, and the debug fault hasn't yet been able to @@ -591,13 +591,14 @@ nmi_16bit_stack: .long 1b,iret_exc .previous -ENTRY(int3) +KPROBE_ENTRY(int3) pushl $-1 # mark this as an int SAVE_ALL xorl %edx,%edx # zero error code movl %esp,%eax # pt_regs pointer call do_int3 jmp ret_from_exception + .previous .text ENTRY(overflow) pushl $0 @@ -631,17 +632,19 @@ ENTRY(stack_segment) pushl $do_stack_segment jmp error_code -ENTRY(general_protection) +KPROBE_ENTRY(general_protection) pushl $do_general_protection jmp error_code + .previous .text ENTRY(alignment_check) pushl $do_alignment_check jmp error_code -ENTRY(page_fault) +KPROBE_ENTRY(page_fault) pushl $do_page_fault jmp error_code + .previous .text #ifdef CONFIG_X86_MCE ENTRY(machine_check) diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c index 6578f40..889eda2 100644 --- a/arch/i386/kernel/io_apic.c +++ b/arch/i386/kernel/io_apic.c @@ -33,6 +33,7 @@ #include <linux/acpi.h> #include <linux/module.h> #include <linux/sysdev.h> + #include <asm/io.h> #include <asm/smp.h> #include <asm/desc.h> @@ -77,7 +78,7 @@ static struct irq_pin_list { int apic, pin, next; } irq_2_pin[PIN_MAP_SIZE]; -int vector_irq[NR_VECTORS] = { [0 ... NR_VECTORS - 1] = -1}; +int vector_irq[NR_VECTORS] __read_mostly = { [0 ... NR_VECTORS - 1] = -1}; #ifdef CONFIG_PCI_MSI #define vector_to_irq(vector) \ (platform_legacy_irq(vector) ? vector : vector_irq[vector]) @@ -222,13 +223,21 @@ static void clear_IO_APIC (void) clear_IO_APIC_pin(apic, pin); } +#ifdef CONFIG_SMP static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t cpumask) { unsigned long flags; int pin; struct irq_pin_list *entry = irq_2_pin + irq; unsigned int apicid_value; + cpumask_t tmp; + cpus_and(tmp, cpumask, cpu_online_map); + if (cpus_empty(tmp)) + tmp = TARGET_CPUS; + + cpus_and(cpumask, tmp, CPU_MASK_ALL); + apicid_value = cpu_mask_to_apicid(cpumask); /* Prepare to do the io_apic_write */ apicid_value = apicid_value << 24; @@ -242,6 +251,7 @@ static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t cpumask) break; entry = irq_2_pin + entry->next; } + set_irq_info(irq, cpumask); spin_unlock_irqrestore(&ioapic_lock, flags); } @@ -259,7 +269,6 @@ static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t cpumask) # define Dprintk(x...) # endif -cpumask_t __cacheline_aligned pending_irq_balance_cpumask[NR_IRQS]; #define IRQBALANCE_CHECK_ARCH -999 static int irqbalance_disabled = IRQBALANCE_CHECK_ARCH; @@ -328,12 +337,7 @@ static inline void balance_irq(int cpu, int irq) cpus_and(allowed_mask, cpu_online_map, irq_affinity[irq]); new_cpu = move(cpu, allowed_mask, now, 1); if (cpu != new_cpu) { - irq_desc_t *desc = irq_desc + irq; - unsigned long flags; - - spin_lock_irqsave(&desc->lock, flags); - pending_irq_balance_cpumask[irq] = cpumask_of_cpu(new_cpu); - spin_unlock_irqrestore(&desc->lock, flags); + set_pending_irq(irq, cpumask_of_cpu(new_cpu)); } } @@ -528,16 +532,12 @@ tryanotherirq: cpus_and(tmp, target_cpu_mask, allowed_mask); if (!cpus_empty(tmp)) { - irq_desc_t *desc = irq_desc + selected_irq; - unsigned long flags; Dprintk("irq = %d moved to cpu = %d\n", selected_irq, min_loaded); /* mark for change destination */ - spin_lock_irqsave(&desc->lock, flags); - pending_irq_balance_cpumask[selected_irq] = - cpumask_of_cpu(min_loaded); - spin_unlock_irqrestore(&desc->lock, flags); + set_pending_irq(selected_irq, cpumask_of_cpu(min_loaded)); + /* Since we made a change, come back sooner to * check for more variation. */ @@ -568,7 +568,8 @@ static int balanced_irq(void *unused) /* push everything to CPU 0 to give us a starting point. */ for (i = 0 ; i < NR_IRQS ; i++) { - pending_irq_balance_cpumask[i] = cpumask_of_cpu(0); + pending_irq_cpumask[i] = cpumask_of_cpu(0); + set_pending_irq(i, cpumask_of_cpu(0)); } for ( ; ; ) { @@ -647,20 +648,9 @@ int __init irqbalance_disable(char *str) __setup("noirqbalance", irqbalance_disable); -static inline void move_irq(int irq) -{ - /* note - we hold the desc->lock */ - if (unlikely(!cpus_empty(pending_irq_balance_cpumask[irq]))) { - set_ioapic_affinity_irq(irq, pending_irq_balance_cpumask[irq]); - cpus_clear(pending_irq_balance_cpumask[irq]); - } -} - late_initcall(balanced_irq_init); - -#else /* !CONFIG_IRQBALANCE */ -static inline void move_irq(int irq) { } #endif /* CONFIG_IRQBALANCE */ +#endif /* CONFIG_SMP */ #ifndef CONFIG_SMP void fastcall send_IPI_self(int vector) @@ -820,6 +810,7 @@ EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector); * we need to reprogram the ioredtbls to cater for the cpus which have come online * so mask in all cases should simply be TARGET_CPUS */ +#ifdef CONFIG_SMP void __init setup_ioapic_dest(void) { int pin, ioapic, irq, irq_entry; @@ -838,6 +829,7 @@ void __init setup_ioapic_dest(void) } } +#endif /* * EISA Edge/Level control register, ELCR @@ -1127,7 +1119,7 @@ static inline int IO_APIC_irq_trigger(int irq) } /* irq_vectors is indexed by the sum of all RTEs in all I/O APICs. */ -u8 irq_vector[NR_IRQ_VECTORS] = { FIRST_DEVICE_VECTOR , 0 }; +u8 irq_vector[NR_IRQ_VECTORS] __read_mostly = { FIRST_DEVICE_VECTOR , 0 }; int assign_irq_vector(int irq) { @@ -1249,6 +1241,7 @@ static void __init setup_IO_APIC_irqs(void) spin_lock_irqsave(&ioapic_lock, flags); io_apic_write(apic, 0x11+2*pin, *(((int *)&entry)+1)); io_apic_write(apic, 0x10+2*pin, *(((int *)&entry)+0)); + set_native_irq_info(irq, TARGET_CPUS); spin_unlock_irqrestore(&ioapic_lock, flags); } } @@ -1944,6 +1937,7 @@ static void ack_edge_ioapic_vector(unsigned int vector) { int irq = vector_to_irq(vector); + move_irq(vector); ack_edge_ioapic_irq(irq); } @@ -1958,6 +1952,7 @@ static void end_level_ioapic_vector (unsigned int vector) { int irq = vector_to_irq(vector); + move_irq(vector); end_level_ioapic_irq(irq); } @@ -1975,14 +1970,17 @@ static void unmask_IO_APIC_vector (unsigned int vector) unmask_IO_APIC_irq(irq); } +#ifdef CONFIG_SMP static void set_ioapic_affinity_vector (unsigned int vector, cpumask_t cpu_mask) { int irq = vector_to_irq(vector); + set_native_irq_info(vector, cpu_mask); set_ioapic_affinity_irq(irq, cpu_mask); } #endif +#endif /* * Level and edge triggered IO-APIC interrupts need different handling, @@ -1992,7 +1990,7 @@ static void set_ioapic_affinity_vector (unsigned int vector, * edge-triggered handler, without risking IRQ storms and other ugly * races. */ -static struct hw_interrupt_type ioapic_edge_type = { +static struct hw_interrupt_type ioapic_edge_type __read_mostly = { .typename = "IO-APIC-edge", .startup = startup_edge_ioapic, .shutdown = shutdown_edge_ioapic, @@ -2000,10 +1998,12 @@ static struct hw_interrupt_type ioapic_edge_type = { .disable = disable_edge_ioapic, .ack = ack_edge_ioapic, .end = end_edge_ioapic, +#ifdef CONFIG_SMP .set_affinity = set_ioapic_affinity, +#endif }; -static struct hw_interrupt_type ioapic_level_type = { +static struct hw_interrupt_type ioapic_level_type __read_mostly = { .typename = "IO-APIC-level", .startup = startup_level_ioapic, .shutdown = shutdown_level_ioapic, @@ -2011,7 +2011,9 @@ static struct hw_interrupt_type ioapic_level_type = { .disable = disable_level_ioapic, .ack = mask_and_ack_level_ioapic, .end = end_level_ioapic, +#ifdef CONFIG_SMP .set_affinity = set_ioapic_affinity, +#endif }; static inline void init_IO_APIC_traps(void) @@ -2074,7 +2076,7 @@ static void ack_lapic_irq (unsigned int irq) static void end_lapic_irq (unsigned int i) { /* nothing */ } -static struct hw_interrupt_type lapic_irq_type = { +static struct hw_interrupt_type lapic_irq_type __read_mostly = { .typename = "local-APIC-edge", .startup = NULL, /* startup_irq() not used for IRQ0 */ .shutdown = NULL, /* shutdown_irq() not used for IRQ0 */ @@ -2421,7 +2423,7 @@ device_initcall(ioapic_init_sysfs); ACPI-based IOAPIC Configuration -------------------------------------------------------------------------- */ -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI int __init io_apic_get_unique_id (int ioapic, int apic_id) { @@ -2569,9 +2571,10 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int a spin_lock_irqsave(&ioapic_lock, flags); io_apic_write(ioapic, 0x11+2*pin, *(((int *)&entry)+1)); io_apic_write(ioapic, 0x10+2*pin, *(((int *)&entry)+0)); + set_native_irq_info(use_pci_vector() ? entry.vector : irq, TARGET_CPUS); spin_unlock_irqrestore(&ioapic_lock, flags); return 0; } -#endif /*CONFIG_ACPI_BOOT*/ +#endif /* CONFIG_ACPI */ diff --git a/arch/i386/kernel/kprobes.c b/arch/i386/kernel/kprobes.c index a6d8c45..6345b43 100644 --- a/arch/i386/kernel/kprobes.c +++ b/arch/i386/kernel/kprobes.c @@ -62,32 +62,32 @@ static inline int is_IF_modifier(kprobe_opcode_t opcode) return 0; } -int arch_prepare_kprobe(struct kprobe *p) +int __kprobes arch_prepare_kprobe(struct kprobe *p) { return 0; } -void arch_copy_kprobe(struct kprobe *p) +void __kprobes arch_copy_kprobe(struct kprobe *p) { memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t)); p->opcode = *p->addr; } -void arch_arm_kprobe(struct kprobe *p) +void __kprobes arch_arm_kprobe(struct kprobe *p) { *p->addr = BREAKPOINT_INSTRUCTION; flush_icache_range((unsigned long) p->addr, (unsigned long) p->addr + sizeof(kprobe_opcode_t)); } -void arch_disarm_kprobe(struct kprobe *p) +void __kprobes arch_disarm_kprobe(struct kprobe *p) { *p->addr = p->opcode; flush_icache_range((unsigned long) p->addr, (unsigned long) p->addr + sizeof(kprobe_opcode_t)); } -void arch_remove_kprobe(struct kprobe *p) +void __kprobes arch_remove_kprobe(struct kprobe *p) { } @@ -127,7 +127,8 @@ static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs) regs->eip = (unsigned long)&p->ainsn.insn; } -void arch_prepare_kretprobe(struct kretprobe *rp, struct pt_regs *regs) +void __kprobes arch_prepare_kretprobe(struct kretprobe *rp, + struct pt_regs *regs) { unsigned long *sara = (unsigned long *)®s->esp; struct kretprobe_instance *ri; @@ -150,7 +151,7 @@ void arch_prepare_kretprobe(struct kretprobe *rp, struct pt_regs *regs) * Interrupts are disabled on entry as trap3 is an interrupt gate and they * remain disabled thorough out this function. */ -static int kprobe_handler(struct pt_regs *regs) +static int __kprobes kprobe_handler(struct pt_regs *regs) { struct kprobe *p; int ret = 0; @@ -176,7 +177,8 @@ static int kprobe_handler(struct pt_regs *regs) Disarm the probe we just hit, and ignore it. */ p = get_kprobe(addr); if (p) { - if (kprobe_status == KPROBE_HIT_SS) { + if (kprobe_status == KPROBE_HIT_SS && + *p->ainsn.insn == BREAKPOINT_INSTRUCTION) { regs->eflags &= ~TF_MASK; regs->eflags |= kprobe_saved_eflags; unlock_kprobes(); @@ -220,7 +222,10 @@ static int kprobe_handler(struct pt_regs *regs) * either a probepoint or a debugger breakpoint * at this address. In either case, no further * handling of this interrupt is appropriate. + * Back up over the (now missing) int3 and run + * the original instruction. */ + regs->eip -= sizeof(kprobe_opcode_t); ret = 1; } /* Not one of ours: let kernel handle it */ @@ -259,7 +264,7 @@ no_kprobe: /* * Called when we hit the probe point at kretprobe_trampoline */ -int trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) +int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) { struct kretprobe_instance *ri = NULL; struct hlist_head *head; @@ -338,7 +343,7 @@ int trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) * that is atop the stack is the address following the copied instruction. * We need to make it the address following the original instruction. */ -static void resume_execution(struct kprobe *p, struct pt_regs *regs) +static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) { unsigned long *tos = (unsigned long *)®s->esp; unsigned long next_eip = 0; @@ -444,8 +449,8 @@ static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr) /* * Wrapper routine to for handling exceptions. */ -int kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, - void *data) +int __kprobes kprobe_exceptions_notify(struct notifier_block *self, + unsigned long val, void *data) { struct die_args *args = (struct die_args *)data; switch (val) { @@ -473,7 +478,7 @@ int kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, return NOTIFY_DONE; } -int setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) +int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) { struct jprobe *jp = container_of(p, struct jprobe, kp); unsigned long addr; @@ -495,7 +500,7 @@ int setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) return 1; } -void jprobe_return(void) +void __kprobes jprobe_return(void) { preempt_enable_no_resched(); asm volatile (" xchgl %%ebx,%%esp \n" @@ -506,7 +511,7 @@ void jprobe_return(void) (jprobe_saved_esp):"memory"); } -int longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) +int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) { u8 *addr = (u8 *) (regs->eip - 1); unsigned long stack_addr = (unsigned long)jprobe_saved_esp; diff --git a/arch/i386/kernel/mpparse.c b/arch/i386/kernel/mpparse.c index 5d0b9a8..cafaeff 100644 --- a/arch/i386/kernel/mpparse.c +++ b/arch/i386/kernel/mpparse.c @@ -668,8 +668,6 @@ void __init get_smp_config (void) struct intel_mp_floating *mpf = mpf_found; /* - * ACPI may be used to obtain the entire SMP configuration or just to - * enumerate/configure processors (CONFIG_ACPI_BOOT). Note that * ACPI supports both logical (e.g. Hyper-Threading) and physical * processors, where MPS only supports physical. */ @@ -825,7 +823,7 @@ void __init find_smp_config (void) ACPI-based MP Configuration -------------------------------------------------------------------------- */ -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI void __init mp_register_lapic_address ( u64 address) @@ -871,7 +869,7 @@ void __init mp_register_lapic ( MP_processor_info(&processor); } -#if defined(CONFIG_X86_IO_APIC) && (defined(CONFIG_ACPI_INTERPRETER) || defined(CONFIG_ACPI_BOOT)) +#ifdef CONFIG_X86_IO_APIC #define MP_ISA_BUS 0 #define MP_MAX_IOAPIC_PIN 127 @@ -1086,11 +1084,9 @@ int mp_register_gsi (u32 gsi, int edge_level, int active_high_low) */ static int gsi_to_irq[MAX_GSI_NUM]; -#ifdef CONFIG_ACPI_BUS /* Don't set up the ACPI SCI because it's already set up */ if (acpi_fadt.sci_int == gsi) return gsi; -#endif ioapic = mp_find_ioapic(gsi); if (ioapic < 0) { @@ -1133,13 +1129,11 @@ int mp_register_gsi (u32 gsi, int edge_level, int active_high_low) if (gsi < MAX_GSI_NUM) { if (gsi > 15) gsi = pci_irq++; -#ifdef CONFIG_ACPI_BUS /* * Don't assign IRQ used by ACPI SCI */ if (gsi == acpi_fadt.sci_int) gsi = pci_irq++; -#endif gsi_to_irq[irq] = gsi; } else { printk(KERN_ERR "GSI %u is too high\n", gsi); @@ -1153,5 +1147,5 @@ int mp_register_gsi (u32 gsi, int edge_level, int active_high_low) return gsi; } -#endif /*CONFIG_X86_IO_APIC && (CONFIG_ACPI_INTERPRETER || CONFIG_ACPI_BOOT)*/ -#endif /*CONFIG_ACPI_BOOT*/ +#endif /* CONFIG_X86_IO_APIC */ +#endif /* CONFIG_ACPI */ diff --git a/arch/i386/kernel/nmi.c b/arch/i386/kernel/nmi.c index 8bbdbda..0178457 100644 --- a/arch/i386/kernel/nmi.c +++ b/arch/i386/kernel/nmi.c @@ -478,6 +478,11 @@ void touch_nmi_watchdog (void) */ for (i = 0; i < NR_CPUS; i++) alert_counter[i] = 0; + + /* + * Tickle the softlockup detector too: + */ + touch_softlockup_watchdog(); } extern void die_nmi(struct pt_regs *, const char *msg); diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c index 294bcca..a659d27 100644 --- a/arch/i386/kernel/setup.c +++ b/arch/i386/kernel/setup.c @@ -82,19 +82,19 @@ EXPORT_SYMBOL(efi_enabled); /* cpu data as detected by the assembly code in head.S */ struct cpuinfo_x86 new_cpu_data __initdata = { 0, 0, 0, 0, -1, 1, 0, 0, -1 }; /* common cpu data for all cpus */ -struct cpuinfo_x86 boot_cpu_data = { 0, 0, 0, 0, -1, 1, 0, 0, -1 }; +struct cpuinfo_x86 boot_cpu_data __read_mostly = { 0, 0, 0, 0, -1, 1, 0, 0, -1 }; EXPORT_SYMBOL(boot_cpu_data); unsigned long mmu_cr4_features; -#ifdef CONFIG_ACPI_INTERPRETER +#ifdef CONFIG_ACPI int acpi_disabled = 0; #else int acpi_disabled = 1; #endif EXPORT_SYMBOL(acpi_disabled); -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI int __initdata acpi_force = 0; extern acpi_interrupt_flags acpi_sci_flags; #endif @@ -798,7 +798,7 @@ static void __init parse_cmdline_early (char ** cmdline_p) } #endif -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI /* "acpi=off" disables both ACPI table parsing and interpreter */ else if (!memcmp(from, "acpi=off", 8)) { disable_acpi(); @@ -854,7 +854,7 @@ static void __init parse_cmdline_early (char ** cmdline_p) else if (!memcmp(from, "noapic", 6)) disable_ioapic_setup(); #endif /* CONFIG_X86_LOCAL_APIC */ -#endif /* CONFIG_ACPI_BOOT */ +#endif /* CONFIG_ACPI */ #ifdef CONFIG_X86_LOCAL_APIC /* enable local APIC */ @@ -1579,7 +1579,7 @@ void __init setup_arch(char **cmdline_p) if (efi_enabled) efi_map_memmap(); -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI /* * Parse the ACPI tables for possible boot-time SMP configuration. */ diff --git a/arch/i386/kernel/time.c b/arch/i386/kernel/time.c index 6f794a7..eefea7c5 100644 --- a/arch/i386/kernel/time.c +++ b/arch/i386/kernel/time.c @@ -194,10 +194,7 @@ int do_settimeofday(struct timespec *tv) set_normalized_timespec(&xtime, sec, nsec); set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); clock_was_set(); return 0; @@ -252,8 +249,7 @@ EXPORT_SYMBOL(profile_pc); * timer_interrupt() needs to keep up the real-time clock, * as well as call the "do_timer()" routine every clocktick */ -static inline void do_timer_interrupt(int irq, void *dev_id, - struct pt_regs *regs) +static inline void do_timer_interrupt(int irq, struct pt_regs *regs) { #ifdef CONFIG_X86_IO_APIC if (timer_ack) { @@ -307,7 +303,7 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) cur_timer->mark_offset(); - do_timer_interrupt(irq, NULL, regs); + do_timer_interrupt(irq, regs); write_sequnlock(&xtime_lock); return IRQ_HANDLED; @@ -348,7 +344,7 @@ static void sync_cmos_clock(unsigned long dummy) * This code is run on a timer. If the clock is set, that timer * may not expire at the correct time. Thus, we adjust... */ - if ((time_status & STA_UNSYNC) != 0) + if (!ntp_synced()) /* * Not synced, exit, do not restart a timer (if one is * running, let it run out). @@ -422,6 +418,7 @@ static int timer_resume(struct sys_device *dev) last_timer->resume(); cur_timer = last_timer; last_timer = NULL; + touch_softlockup_watchdog(); return 0; } diff --git a/arch/i386/kernel/timers/timer_hpet.c b/arch/i386/kernel/timers/timer_hpet.c index 001de97..d973a8b 100644 --- a/arch/i386/kernel/timers/timer_hpet.c +++ b/arch/i386/kernel/timers/timer_hpet.c @@ -18,8 +18,8 @@ #include "mach_timer.h" #include <asm/hpet.h> -static unsigned long __read_mostly hpet_usec_quotient; /* convert hpet clks to usec */ -static unsigned long tsc_hpet_quotient; /* convert tsc to hpet clks */ +static unsigned long hpet_usec_quotient __read_mostly; /* convert hpet clks to usec */ +static unsigned long tsc_hpet_quotient __read_mostly; /* convert tsc to hpet clks */ static unsigned long hpet_last; /* hpet counter value at last tick*/ static unsigned long last_tsc_low; /* lsb 32 bits of Time Stamp Counter */ static unsigned long last_tsc_high; /* msb 32 bits of Time Stamp Counter */ diff --git a/arch/i386/kernel/traps.c b/arch/i386/kernel/traps.c index 54629bb..09a58cb 100644 --- a/arch/i386/kernel/traps.c +++ b/arch/i386/kernel/traps.c @@ -363,8 +363,9 @@ static inline void die_if_kernel(const char * str, struct pt_regs * regs, long e die(str, regs, err); } -static void do_trap(int trapnr, int signr, char *str, int vm86, - struct pt_regs * regs, long error_code, siginfo_t *info) +static void __kprobes do_trap(int trapnr, int signr, char *str, int vm86, + struct pt_regs * regs, long error_code, + siginfo_t *info) { struct task_struct *tsk = current; tsk->thread.error_code = error_code; @@ -460,7 +461,8 @@ DO_ERROR(12, SIGBUS, "stack segment", stack_segment) DO_ERROR_INFO(17, SIGBUS, "alignment check", alignment_check, BUS_ADRALN, 0) DO_ERROR_INFO(32, SIGSEGV, "iret exception", iret_error, ILL_BADSTK, 0) -fastcall void do_general_protection(struct pt_regs * regs, long error_code) +fastcall void __kprobes do_general_protection(struct pt_regs * regs, + long error_code) { int cpu = get_cpu(); struct tss_struct *tss = &per_cpu(init_tss, cpu); @@ -657,7 +659,7 @@ fastcall void do_nmi(struct pt_regs * regs, long error_code) ++nmi_count(cpu); - if (!nmi_callback(regs, cpu)) + if (!rcu_dereference(nmi_callback)(regs, cpu)) default_do_nmi(regs); nmi_exit(); @@ -665,7 +667,7 @@ fastcall void do_nmi(struct pt_regs * regs, long error_code) void set_nmi_callback(nmi_callback_t callback) { - nmi_callback = callback; + rcu_assign_pointer(nmi_callback, callback); } EXPORT_SYMBOL_GPL(set_nmi_callback); @@ -676,7 +678,7 @@ void unset_nmi_callback(void) EXPORT_SYMBOL_GPL(unset_nmi_callback); #ifdef CONFIG_KPROBES -fastcall void do_int3(struct pt_regs *regs, long error_code) +fastcall void __kprobes do_int3(struct pt_regs *regs, long error_code) { if (notify_die(DIE_INT3, "int3", regs, error_code, 3, SIGTRAP) == NOTIFY_STOP) @@ -710,7 +712,7 @@ fastcall void do_int3(struct pt_regs *regs, long error_code) * find every occurrence of the TF bit that could be saved away even * by user code) */ -fastcall void do_debug(struct pt_regs * regs, long error_code) +fastcall void __kprobes do_debug(struct pt_regs * regs, long error_code) { unsigned int condition; struct task_struct *tsk = current; diff --git a/arch/i386/kernel/vmlinux.lds.S b/arch/i386/kernel/vmlinux.lds.S index 761972f..13b9c62 100644 --- a/arch/i386/kernel/vmlinux.lds.S +++ b/arch/i386/kernel/vmlinux.lds.S @@ -22,6 +22,7 @@ SECTIONS *(.text) SCHED_TEXT LOCK_TEXT + KPROBES_TEXT *(.fixup) *(.gnu.warning) } = 0x9090 diff --git a/arch/i386/mach-default/topology.c b/arch/i386/mach-default/topology.c index 23395ff..b643140 100644 --- a/arch/i386/mach-default/topology.c +++ b/arch/i386/mach-default/topology.c @@ -76,7 +76,7 @@ static int __init topology_init(void) for_each_online_node(i) arch_register_node(i); - for_each_cpu(i) + for_each_present_cpu(i) arch_register_cpu(i); return 0; } @@ -87,7 +87,7 @@ static int __init topology_init(void) { int i; - for_each_cpu(i) + for_each_present_cpu(i) arch_register_cpu(i); return 0; } diff --git a/arch/i386/mach-es7000/es7000plat.c b/arch/i386/mach-es7000/es7000plat.c index 2000bdc..dc66605 100644 --- a/arch/i386/mach-es7000/es7000plat.c +++ b/arch/i386/mach-es7000/es7000plat.c @@ -51,7 +51,7 @@ struct mip_reg *host_reg; int mip_port; unsigned long mip_addr, host_addr; -#if defined(CONFIG_X86_IO_APIC) && (defined(CONFIG_ACPI_INTERPRETER) || defined(CONFIG_ACPI_BOOT)) +#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_ACPI) /* * GSI override for ES7000 platforms. @@ -73,7 +73,7 @@ es7000_rename_gsi(int ioapic, int gsi) return gsi; } -#endif // (CONFIG_X86_IO_APIC) && (CONFIG_ACPI_INTERPRETER || CONFIG_ACPI_BOOT) +#endif /* (CONFIG_X86_IO_APIC) && (CONFIG_ACPI) */ void __init setup_unisys () diff --git a/arch/i386/mm/discontig.c b/arch/i386/mm/discontig.c index 6711ce3..244d8ec 100644 --- a/arch/i386/mm/discontig.c +++ b/arch/i386/mm/discontig.c @@ -37,7 +37,7 @@ #include <asm/mmzone.h> #include <bios_ebda.h> -struct pglist_data *node_data[MAX_NUMNODES]; +struct pglist_data *node_data[MAX_NUMNODES] __read_mostly; EXPORT_SYMBOL(node_data); bootmem_data_t node0_bdata; @@ -49,8 +49,8 @@ bootmem_data_t node0_bdata; * 2) node_start_pfn - the starting page frame number for a node * 3) node_end_pfn - the ending page fram number for a node */ -unsigned long node_start_pfn[MAX_NUMNODES]; -unsigned long node_end_pfn[MAX_NUMNODES]; +unsigned long node_start_pfn[MAX_NUMNODES] __read_mostly; +unsigned long node_end_pfn[MAX_NUMNODES] __read_mostly; #ifdef CONFIG_DISCONTIGMEM @@ -66,7 +66,7 @@ unsigned long node_end_pfn[MAX_NUMNODES]; * physnode_map[4-7] = 1; * physnode_map[8- ] = -1; */ -s8 physnode_map[MAX_ELEMENTS] = { [0 ... (MAX_ELEMENTS - 1)] = -1}; +s8 physnode_map[MAX_ELEMENTS] __read_mostly = { [0 ... (MAX_ELEMENTS - 1)] = -1}; EXPORT_SYMBOL(physnode_map); void memory_present(int nid, unsigned long start, unsigned long end) diff --git a/arch/i386/mm/fault.c b/arch/i386/mm/fault.c index 411b850..9edd448 100644 --- a/arch/i386/mm/fault.c +++ b/arch/i386/mm/fault.c @@ -21,6 +21,7 @@ #include <linux/vt_kern.h> /* For unblank_screen() */ #include <linux/highmem.h> #include <linux/module.h> +#include <linux/kprobes.h> #include <asm/system.h> #include <asm/uaccess.h> @@ -223,7 +224,8 @@ fastcall void do_invalid_op(struct pt_regs *, unsigned long); * bit 1 == 0 means read, 1 means write * bit 2 == 0 means kernel, 1 means user-mode */ -fastcall void do_page_fault(struct pt_regs *regs, unsigned long error_code) +fastcall void __kprobes do_page_fault(struct pt_regs *regs, + unsigned long error_code) { struct task_struct *tsk; struct mm_struct *mm; diff --git a/arch/i386/mm/init.c b/arch/i386/mm/init.c index 9edfc05..2ebaf75 100644 --- a/arch/i386/mm/init.c +++ b/arch/i386/mm/init.c @@ -393,7 +393,7 @@ void zap_low_mappings (void) } static int disable_nx __initdata = 0; -u64 __supported_pte_mask = ~_PAGE_NX; +u64 __supported_pte_mask __read_mostly = ~_PAGE_NX; /* * noexec = on|off diff --git a/arch/i386/oprofile/init.c b/arch/i386/oprofile/init.c index c90332d..5341d48 100644 --- a/arch/i386/oprofile/init.c +++ b/arch/i386/oprofile/init.c @@ -15,9 +15,9 @@ * with the NMI mode driver. */ -extern int nmi_init(struct oprofile_operations * ops); -extern int nmi_timer_init(struct oprofile_operations * ops); -extern void nmi_exit(void); +extern int op_nmi_init(struct oprofile_operations * ops); +extern int op_nmi_timer_init(struct oprofile_operations * ops); +extern void op_nmi_exit(void); extern void x86_backtrace(struct pt_regs * const regs, unsigned int depth); @@ -28,11 +28,11 @@ int __init oprofile_arch_init(struct oprofile_operations * ops) ret = -ENODEV; #ifdef CONFIG_X86_LOCAL_APIC - ret = nmi_init(ops); + ret = op_nmi_init(ops); #endif #ifdef CONFIG_X86_IO_APIC if (ret < 0) - ret = nmi_timer_init(ops); + ret = op_nmi_timer_init(ops); #endif ops->backtrace = x86_backtrace; @@ -43,6 +43,6 @@ int __init oprofile_arch_init(struct oprofile_operations * ops) void oprofile_arch_exit(void) { #ifdef CONFIG_X86_LOCAL_APIC - nmi_exit(); + op_nmi_exit(); #endif } diff --git a/arch/i386/oprofile/nmi_int.c b/arch/i386/oprofile/nmi_int.c index 255e470..0493e8b 100644 --- a/arch/i386/oprofile/nmi_int.c +++ b/arch/i386/oprofile/nmi_int.c @@ -355,7 +355,7 @@ static int __init ppro_init(char ** cpu_type) /* in order to get driverfs right */ static int using_nmi; -int __init nmi_init(struct oprofile_operations *ops) +int __init op_nmi_init(struct oprofile_operations *ops) { __u8 vendor = boot_cpu_data.x86_vendor; __u8 family = boot_cpu_data.x86; @@ -420,7 +420,7 @@ int __init nmi_init(struct oprofile_operations *ops) } -void nmi_exit(void) +void op_nmi_exit(void) { if (using_nmi) exit_driverfs(); diff --git a/arch/i386/oprofile/nmi_timer_int.c b/arch/i386/oprofile/nmi_timer_int.c index c58d0c1..ad93cdd 100644 --- a/arch/i386/oprofile/nmi_timer_int.c +++ b/arch/i386/oprofile/nmi_timer_int.c @@ -40,7 +40,7 @@ static void timer_stop(void) } -int __init nmi_timer_init(struct oprofile_operations * ops) +int __init op_nmi_timer_init(struct oprofile_operations * ops) { extern int nmi_active; diff --git a/arch/i386/pci/Makefile b/arch/i386/pci/Makefile index 1bff03f..ead6122 100644 --- a/arch/i386/pci/Makefile +++ b/arch/i386/pci/Makefile @@ -5,7 +5,7 @@ obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o obj-$(CONFIG_PCI_DIRECT) += direct.o pci-y := fixup.o -pci-$(CONFIG_ACPI_PCI) += acpi.o +pci-$(CONFIG_ACPI) += acpi.o pci-y += legacy.o irq.o pci-$(CONFIG_X86_VISWS) := visws.o fixup.o diff --git a/arch/i386/pci/irq.c b/arch/i386/pci/irq.c index 86348b6..326a2ed 100644 --- a/arch/i386/pci/irq.c +++ b/arch/i386/pci/irq.c @@ -1075,7 +1075,7 @@ static void pirq_penalize_isa_irq(int irq, int active) void pcibios_penalize_isa_irq(int irq, int active) { -#ifdef CONFIG_ACPI_PCI +#ifdef CONFIG_ACPI if (!acpi_noirq) acpi_penalize_isa_irq(irq, active); else diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index d0743c6..ed25d66 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -60,6 +60,7 @@ choice config IA64_GENERIC bool "generic" + select ACPI select NUMA select ACPI_NUMA select VIRTUAL_MEM_MAP @@ -346,38 +347,10 @@ endmenu menu "Power management and ACPI" -config PM - bool "Power Management support" - depends on !IA64_HP_SIM - default y - help - "Power Management" means that parts of your computer are shut - off or put into a power conserving "sleep" mode if they are not - being used. There are two competing standards for doing this: APM - and ACPI. If you want to use either one, say Y here and then also - to the requisite support below. - - Power Management is most important for battery powered laptop - computers; if you have a laptop, check out the Linux Laptop home - page on the WWW at <http://www.linux-on-laptops.com/> and the - Battery Powered Linux mini-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - Note that, even if you say N here, Linux on the x86 architecture - will issue the hlt instruction if nothing is to be done, thereby - sending the processor to sleep and saving power. - -config ACPI - bool - depends on !IA64_HP_SIM - default y - -if !IA64_HP_SIM +source "kernel/power/Kconfig" source "drivers/acpi/Kconfig" -endif - if PM source "arch/ia64/kernel/cpufreq/Kconfig" @@ -429,6 +402,11 @@ config GENERIC_IRQ_PROBE bool default y +config GENERIC_PENDING_IRQ + bool + depends on GENERIC_HARDIRQS && SMP + default y + source "arch/ia64/hp/sim/Kconfig" source "arch/ia64/oprofile/Kconfig" diff --git a/arch/ia64/configs/bigsur_defconfig b/arch/ia64/configs/bigsur_defconfig index b95fcf8..3b65cbb 100644 --- a/arch/ia64/configs/bigsur_defconfig +++ b/arch/ia64/configs/bigsur_defconfig @@ -107,18 +107,12 @@ CONFIG_ACPI=y # # ACPI (Advanced Configuration and Power Interface) Support # -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_BUTTON=m -CONFIG_ACPI_VIDEO=m CONFIG_ACPI_FAN=m CONFIG_ACPI_PROCESSOR=m CONFIG_ACPI_THERMAL=m -CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set -CONFIG_ACPI_BUS=y CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y # diff --git a/arch/ia64/configs/sn2_defconfig b/arch/ia64/configs/sn2_defconfig index 5f1cceb..08112ab 100644 --- a/arch/ia64/configs/sn2_defconfig +++ b/arch/ia64/configs/sn2_defconfig @@ -129,19 +129,12 @@ CONFIG_ACPI=y # # ACPI (Advanced Configuration and Power Interface) Support # -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_INTERPRETER=y # CONFIG_ACPI_BUTTON is not set -CONFIG_ACPI_VIDEO=m -CONFIG_ACPI_HOTKEY=m # CONFIG_ACPI_FAN is not set # CONFIG_ACPI_PROCESSOR is not set CONFIG_ACPI_NUMA=y -CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set -CONFIG_ACPI_BUS=y CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y # CONFIG_ACPI_CONTAINER is not set diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig index d536ec7..d452e18 100644 --- a/arch/ia64/configs/tiger_defconfig +++ b/arch/ia64/configs/tiger_defconfig @@ -127,20 +127,13 @@ CONFIG_ACPI=y # # ACPI (Advanced Configuration and Power Interface) Support # -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_BUTTON=m -# CONFIG_ACPI_VIDEO is not set -# CONFIG_ACPI_HOTKEY is not set CONFIG_ACPI_FAN=m CONFIG_ACPI_PROCESSOR=m # CONFIG_ACPI_HOTPLUG_CPU is not set CONFIG_ACPI_THERMAL=m -CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set -CONFIG_ACPI_BUS=y CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y # CONFIG_ACPI_CONTAINER is not set diff --git a/arch/ia64/configs/zx1_defconfig b/arch/ia64/configs/zx1_defconfig index d569036..80b0e9e 100644 --- a/arch/ia64/configs/zx1_defconfig +++ b/arch/ia64/configs/zx1_defconfig @@ -127,19 +127,12 @@ CONFIG_ACPI=y # # ACPI (Advanced Configuration and Power Interface) Support # -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_BUTTON=y -CONFIG_ACPI_VIDEO=m -CONFIG_ACPI_HOTKEY=m CONFIG_ACPI_FAN=y CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y -CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set -CONFIG_ACPI_BUS=y CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y # CONFIG_ACPI_CONTAINER is not set diff --git a/arch/ia64/defconfig b/arch/ia64/defconfig index 2aa32f0..5da2081 100644 --- a/arch/ia64/defconfig +++ b/arch/ia64/defconfig @@ -117,20 +117,14 @@ CONFIG_ACPI=y # # ACPI (Advanced Configuration and Power Interface) Support # -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_BUTTON=m -CONFIG_ACPI_VIDEO=m CONFIG_ACPI_FAN=m CONFIG_ACPI_PROCESSOR=m CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_THERMAL=m CONFIG_ACPI_NUMA=y -CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set -CONFIG_ACPI_BUS=y CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y CONFIG_ACPI_CONTAINER=m diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c index 7dcb858..b42ec37 100644 --- a/arch/ia64/hp/sim/simserial.c +++ b/arch/ia64/hp/sim/simserial.c @@ -130,7 +130,7 @@ static void rs_stop(struct tty_struct *tty) static void rs_start(struct tty_struct *tty) { -#if SIMSERIAL_DEBUG +#ifdef SIMSERIAL_DEBUG printk("rs_start: tty->stopped=%d tty->hw_stopped=%d tty->flow_stopped=%d\n", tty->stopped, tty->hw_stopped, tty->flow_stopped); #endif diff --git a/arch/ia64/ia32/ia32_entry.S b/arch/ia64/ia32/ia32_entry.S index 829a6d8..0708edb 100644 --- a/arch/ia64/ia32/ia32_entry.S +++ b/arch/ia64/ia32/ia32_entry.S @@ -215,7 +215,7 @@ ia32_syscall_table: data8 sys32_fork data8 sys_read data8 sys_write - data8 sys32_open /* 5 */ + data8 compat_sys_open /* 5 */ data8 sys_close data8 sys32_waitpid data8 sys_creat diff --git a/arch/ia64/ia32/sys_ia32.c b/arch/ia64/ia32/sys_ia32.c index c1e20d6..e29a8a5 100644 --- a/arch/ia64/ia32/sys_ia32.c +++ b/arch/ia64/ia32/sys_ia32.c @@ -2359,37 +2359,6 @@ sys32_brk (unsigned int brk) return ret; } -/* - * Exactly like fs/open.c:sys_open(), except that it doesn't set the O_LARGEFILE flag. - */ -asmlinkage long -sys32_open (const char __user * filename, int flags, int mode) -{ - char * tmp; - int fd, error; - - tmp = getname(filename); - fd = PTR_ERR(tmp); - if (!IS_ERR(tmp)) { - fd = get_unused_fd(); - if (fd >= 0) { - struct file *f = filp_open(tmp, flags, mode); - error = PTR_ERR(f); - if (IS_ERR(f)) - goto out_error; - fd_install(fd, f); - } -out: - putname(tmp); - } - return fd; - -out_error: - put_unused_fd(fd); - fd = error; - goto out; -} - /* Structure for ia32 emulation on ia64 */ struct epoll_event32 { diff --git a/arch/ia64/kernel/Makefile b/arch/ia64/kernel/Makefile index b242594..307514f 100644 --- a/arch/ia64/kernel/Makefile +++ b/arch/ia64/kernel/Makefile @@ -16,7 +16,7 @@ obj-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += acpi-ext.o obj-$(CONFIG_IA64_PALINFO) += palinfo.o obj-$(CONFIG_IOSAPIC) += iosapic.o obj-$(CONFIG_MODULES) += module.o -obj-$(CONFIG_SMP) += smp.o smpboot.o domain.o +obj-$(CONFIG_SMP) += smp.o smpboot.o obj-$(CONFIG_NUMA) += numa.o obj-$(CONFIG_PERFMON) += perfmon_default_smpl.o obj-$(CONFIG_IA64_CYCLONE) += cyclone.o diff --git a/arch/ia64/kernel/acpi-ext.c b/arch/ia64/kernel/acpi-ext.c index 2623df5..13a5b3b 100644 --- a/arch/ia64/kernel/acpi-ext.c +++ b/arch/ia64/kernel/acpi-ext.c @@ -17,20 +17,20 @@ #include <asm/acpi-ext.h> struct acpi_vendor_descriptor { - u8 guid_id; - efi_guid_t guid; + u8 guid_id; + efi_guid_t guid; }; struct acpi_vendor_info { - struct acpi_vendor_descriptor *descriptor; - u8 *data; - u32 length; + struct acpi_vendor_descriptor *descriptor; + u8 *data; + u32 length; }; acpi_status acpi_vendor_resource_match(struct acpi_resource *resource, void *context) { - struct acpi_vendor_info *info = (struct acpi_vendor_info *) context; + struct acpi_vendor_info *info = (struct acpi_vendor_info *)context; struct acpi_resource_vendor *vendor; struct acpi_vendor_descriptor *descriptor; u32 length; @@ -38,8 +38,8 @@ acpi_vendor_resource_match(struct acpi_resource *resource, void *context) if (resource->id != ACPI_RSTYPE_VENDOR) return AE_OK; - vendor = (struct acpi_resource_vendor *) &resource->data; - descriptor = (struct acpi_vendor_descriptor *) vendor->reserved; + vendor = (struct acpi_resource_vendor *)&resource->data; + descriptor = (struct acpi_vendor_descriptor *)vendor->reserved; if (vendor->length <= sizeof(*info->descriptor) || descriptor->guid_id != info->descriptor->guid_id || efi_guidcmp(descriptor->guid, info->descriptor->guid)) @@ -50,21 +50,24 @@ acpi_vendor_resource_match(struct acpi_resource *resource, void *context) if (!info->data) return AE_NO_MEMORY; - memcpy(info->data, vendor->reserved + sizeof(struct acpi_vendor_descriptor), length); + memcpy(info->data, + vendor->reserved + sizeof(struct acpi_vendor_descriptor), + length); info->length = length; return AE_CTRL_TERMINATE; } acpi_status -acpi_find_vendor_resource(acpi_handle obj, struct acpi_vendor_descriptor *id, - u8 **data, u32 *length) +acpi_find_vendor_resource(acpi_handle obj, struct acpi_vendor_descriptor * id, + u8 ** data, u32 * length) { struct acpi_vendor_info info; info.descriptor = id; info.data = NULL; - acpi_walk_resources(obj, METHOD_NAME__CRS, acpi_vendor_resource_match, &info); + acpi_walk_resources(obj, METHOD_NAME__CRS, acpi_vendor_resource_match, + &info); if (!info.data) return AE_NOT_FOUND; @@ -75,17 +78,19 @@ acpi_find_vendor_resource(acpi_handle obj, struct acpi_vendor_descriptor *id, struct acpi_vendor_descriptor hp_ccsr_descriptor = { .guid_id = 2, - .guid = EFI_GUID(0x69e9adf9, 0x924f, 0xab5f, 0xf6, 0x4a, 0x24, 0xd2, 0x01, 0x37, 0x0e, 0xad) + .guid = + EFI_GUID(0x69e9adf9, 0x924f, 0xab5f, 0xf6, 0x4a, 0x24, 0xd2, 0x01, + 0x37, 0x0e, 0xad) }; -acpi_status -hp_acpi_csr_space(acpi_handle obj, u64 *csr_base, u64 *csr_length) +acpi_status hp_acpi_csr_space(acpi_handle obj, u64 * csr_base, u64 * csr_length) { acpi_status status; u8 *data; u32 length; - status = acpi_find_vendor_resource(obj, &hp_ccsr_descriptor, &data, &length); + status = + acpi_find_vendor_resource(obj, &hp_ccsr_descriptor, &data, &length); if (ACPI_FAILURE(status) || length != 16) return AE_NOT_FOUND; diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index 66970d7..28a4529 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -74,12 +74,11 @@ unsigned int acpi_cpei_override; unsigned int acpi_cpei_phys_cpuid; #define MAX_SAPICS 256 -u16 ia64_acpiid_to_sapicid[MAX_SAPICS] = - { [0 ... MAX_SAPICS - 1] = -1 }; +u16 ia64_acpiid_to_sapicid[MAX_SAPICS] = {[0 ... MAX_SAPICS - 1] = -1 }; + EXPORT_SYMBOL(ia64_acpiid_to_sapicid); -const char * -acpi_get_sysname (void) +const char *acpi_get_sysname(void) { #ifdef CONFIG_IA64_GENERIC unsigned long rsdp_phys; @@ -89,27 +88,29 @@ acpi_get_sysname (void) rsdp_phys = acpi_find_rsdp(); if (!rsdp_phys) { - printk(KERN_ERR "ACPI 2.0 RSDP not found, default to \"dig\"\n"); + printk(KERN_ERR + "ACPI 2.0 RSDP not found, default to \"dig\"\n"); return "dig"; } - rsdp = (struct acpi20_table_rsdp *) __va(rsdp_phys); + rsdp = (struct acpi20_table_rsdp *)__va(rsdp_phys); if (strncmp(rsdp->signature, RSDP_SIG, sizeof(RSDP_SIG) - 1)) { - printk(KERN_ERR "ACPI 2.0 RSDP signature incorrect, default to \"dig\"\n"); + printk(KERN_ERR + "ACPI 2.0 RSDP signature incorrect, default to \"dig\"\n"); return "dig"; } - xsdt = (struct acpi_table_xsdt *) __va(rsdp->xsdt_address); + xsdt = (struct acpi_table_xsdt *)__va(rsdp->xsdt_address); hdr = &xsdt->header; if (strncmp(hdr->signature, XSDT_SIG, sizeof(XSDT_SIG) - 1)) { - printk(KERN_ERR "ACPI 2.0 XSDT signature incorrect, default to \"dig\"\n"); + printk(KERN_ERR + "ACPI 2.0 XSDT signature incorrect, default to \"dig\"\n"); return "dig"; } if (!strcmp(hdr->oem_id, "HP")) { return "hpzx1"; - } - else if (!strcmp(hdr->oem_id, "SGI")) { + } else if (!strcmp(hdr->oem_id, "SGI")) { return "sn2"; } @@ -131,7 +132,7 @@ acpi_get_sysname (void) #endif } -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI #define ACPI_MAX_PLATFORM_INTERRUPTS 256 @@ -146,8 +147,7 @@ enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_IOSAPIC; * Interrupt routing API for device drivers. Provides interrupt vector for * a generic platform event. Currently only CPEI is implemented. */ -int -acpi_request_vector (u32 int_type) +int acpi_request_vector(u32 int_type) { int vector = -1; @@ -155,12 +155,12 @@ acpi_request_vector (u32 int_type) /* corrected platform error interrupt */ vector = platform_intr_list[int_type]; } else - printk(KERN_ERR "acpi_request_vector(): invalid interrupt type\n"); + printk(KERN_ERR + "acpi_request_vector(): invalid interrupt type\n"); return vector; } -char * -__acpi_map_table (unsigned long phys_addr, unsigned long size) +char *__acpi_map_table(unsigned long phys_addr, unsigned long size) { return __va(phys_addr); } @@ -169,19 +169,18 @@ __acpi_map_table (unsigned long phys_addr, unsigned long size) Boot-time Table Parsing -------------------------------------------------------------------------- */ -static int total_cpus __initdata; -static int available_cpus __initdata; -struct acpi_table_madt * acpi_madt __initdata; -static u8 has_8259; - +static int total_cpus __initdata; +static int available_cpus __initdata; +struct acpi_table_madt *acpi_madt __initdata; +static u8 has_8259; static int __init -acpi_parse_lapic_addr_ovr ( - acpi_table_entry_header *header, const unsigned long end) +acpi_parse_lapic_addr_ovr(acpi_table_entry_header * header, + const unsigned long end) { struct acpi_table_lapic_addr_ovr *lapic; - lapic = (struct acpi_table_lapic_addr_ovr *) header; + lapic = (struct acpi_table_lapic_addr_ovr *)header; if (BAD_MADT_ENTRY(lapic, end)) return -EINVAL; @@ -193,22 +192,23 @@ acpi_parse_lapic_addr_ovr ( return 0; } - static int __init -acpi_parse_lsapic (acpi_table_entry_header *header, const unsigned long end) +acpi_parse_lsapic(acpi_table_entry_header * header, const unsigned long end) { struct acpi_table_lsapic *lsapic; - lsapic = (struct acpi_table_lsapic *) header; + lsapic = (struct acpi_table_lsapic *)header; if (BAD_MADT_ENTRY(lsapic, end)) return -EINVAL; if (lsapic->flags.enabled) { #ifdef CONFIG_SMP - smp_boot_data.cpu_phys_id[available_cpus] = (lsapic->id << 8) | lsapic->eid; + smp_boot_data.cpu_phys_id[available_cpus] = + (lsapic->id << 8) | lsapic->eid; #endif - ia64_acpiid_to_sapicid[lsapic->acpi_id] = (lsapic->id << 8) | lsapic->eid; + ia64_acpiid_to_sapicid[lsapic->acpi_id] = + (lsapic->id << 8) | lsapic->eid; ++available_cpus; } @@ -216,13 +216,12 @@ acpi_parse_lsapic (acpi_table_entry_header *header, const unsigned long end) return 0; } - static int __init -acpi_parse_lapic_nmi (acpi_table_entry_header *header, const unsigned long end) +acpi_parse_lapic_nmi(acpi_table_entry_header * header, const unsigned long end) { struct acpi_table_lapic_nmi *lacpi_nmi; - lacpi_nmi = (struct acpi_table_lapic_nmi*) header; + lacpi_nmi = (struct acpi_table_lapic_nmi *)header; if (BAD_MADT_ENTRY(lacpi_nmi, end)) return -EINVAL; @@ -231,13 +230,12 @@ acpi_parse_lapic_nmi (acpi_table_entry_header *header, const unsigned long end) return 0; } - static int __init -acpi_parse_iosapic (acpi_table_entry_header *header, const unsigned long end) +acpi_parse_iosapic(acpi_table_entry_header * header, const unsigned long end) { struct acpi_table_iosapic *iosapic; - iosapic = (struct acpi_table_iosapic *) header; + iosapic = (struct acpi_table_iosapic *)header; if (BAD_MADT_ENTRY(iosapic, end)) return -EINVAL; @@ -245,15 +243,14 @@ acpi_parse_iosapic (acpi_table_entry_header *header, const unsigned long end) return iosapic_init(iosapic->address, iosapic->global_irq_base); } - static int __init -acpi_parse_plat_int_src ( - acpi_table_entry_header *header, const unsigned long end) +acpi_parse_plat_int_src(acpi_table_entry_header * header, + const unsigned long end) { struct acpi_table_plat_int_src *plintsrc; int vector; - plintsrc = (struct acpi_table_plat_int_src *) header; + plintsrc = (struct acpi_table_plat_int_src *)header; if (BAD_MADT_ENTRY(plintsrc, end)) return -EINVAL; @@ -267,8 +264,12 @@ acpi_parse_plat_int_src ( plintsrc->iosapic_vector, plintsrc->eid, plintsrc->id, - (plintsrc->flags.polarity == 1) ? IOSAPIC_POL_HIGH : IOSAPIC_POL_LOW, - (plintsrc->flags.trigger == 1) ? IOSAPIC_EDGE : IOSAPIC_LEVEL); + (plintsrc->flags.polarity == + 1) ? IOSAPIC_POL_HIGH : + IOSAPIC_POL_LOW, + (plintsrc->flags.trigger == + 1) ? IOSAPIC_EDGE : + IOSAPIC_LEVEL); platform_intr_list[plintsrc->type] = vector; if (acpi_madt_rev > 1) { @@ -283,7 +284,6 @@ acpi_parse_plat_int_src ( return 0; } - unsigned int can_cpei_retarget(void) { extern int cpe_vector; @@ -322,29 +322,30 @@ unsigned int get_cpei_target_cpu(void) } static int __init -acpi_parse_int_src_ovr ( - acpi_table_entry_header *header, const unsigned long end) +acpi_parse_int_src_ovr(acpi_table_entry_header * header, + const unsigned long end) { struct acpi_table_int_src_ovr *p; - p = (struct acpi_table_int_src_ovr *) header; + p = (struct acpi_table_int_src_ovr *)header; if (BAD_MADT_ENTRY(p, end)) return -EINVAL; iosapic_override_isa_irq(p->bus_irq, p->global_irq, - (p->flags.polarity == 1) ? IOSAPIC_POL_HIGH : IOSAPIC_POL_LOW, - (p->flags.trigger == 1) ? IOSAPIC_EDGE : IOSAPIC_LEVEL); + (p->flags.polarity == + 1) ? IOSAPIC_POL_HIGH : IOSAPIC_POL_LOW, + (p->flags.trigger == + 1) ? IOSAPIC_EDGE : IOSAPIC_LEVEL); return 0; } - static int __init -acpi_parse_nmi_src (acpi_table_entry_header *header, const unsigned long end) +acpi_parse_nmi_src(acpi_table_entry_header * header, const unsigned long end) { struct acpi_table_nmi_src *nmi_src; - nmi_src = (struct acpi_table_nmi_src*) header; + nmi_src = (struct acpi_table_nmi_src *)header; if (BAD_MADT_ENTRY(nmi_src, end)) return -EINVAL; @@ -353,11 +354,9 @@ acpi_parse_nmi_src (acpi_table_entry_header *header, const unsigned long end) return 0; } -static void __init -acpi_madt_oem_check (char *oem_id, char *oem_table_id) +static void __init acpi_madt_oem_check(char *oem_id, char *oem_table_id) { - if (!strncmp(oem_id, "IBM", 3) && - (!strncmp(oem_table_id, "SERMOW", 6))) { + if (!strncmp(oem_id, "IBM", 3) && (!strncmp(oem_table_id, "SERMOW", 6))) { /* * Unfortunately ITC_DRIFT is not yet part of the @@ -370,19 +369,18 @@ acpi_madt_oem_check (char *oem_id, char *oem_table_id) } } -static int __init -acpi_parse_madt (unsigned long phys_addr, unsigned long size) +static int __init acpi_parse_madt(unsigned long phys_addr, unsigned long size) { if (!phys_addr || !size) return -EINVAL; - acpi_madt = (struct acpi_table_madt *) __va(phys_addr); + acpi_madt = (struct acpi_table_madt *)__va(phys_addr); acpi_madt_rev = acpi_madt->header.revision; /* remember the value for reference after free_initmem() */ #ifdef CONFIG_ITANIUM - has_8259 = 1; /* Firmware on old Itanium systems is broken */ + has_8259 = 1; /* Firmware on old Itanium systems is broken */ #else has_8259 = acpi_madt->flags.pcat_compat; #endif @@ -396,19 +394,18 @@ acpi_parse_madt (unsigned long phys_addr, unsigned long size) printk(KERN_INFO PREFIX "Local APIC address %p\n", ipi_base_addr); acpi_madt_oem_check(acpi_madt->header.oem_id, - acpi_madt->header.oem_table_id); + acpi_madt->header.oem_table_id); return 0; } - #ifdef CONFIG_ACPI_NUMA #undef SLIT_DEBUG #define PXM_FLAG_LEN ((MAX_PXM_DOMAINS + 1)/32) -static int __initdata srat_num_cpus; /* number of cpus */ +static int __initdata srat_num_cpus; /* number of cpus */ static u32 __devinitdata pxm_flag[PXM_FLAG_LEN]; #define pxm_bit_set(bit) (set_bit(bit,(void *)pxm_flag)) #define pxm_bit_test(bit) (test_bit(bit,(void *)pxm_flag)) @@ -421,15 +418,15 @@ static struct acpi_table_slit __initdata *slit_table; * ACPI 2.0 SLIT (System Locality Information Table) * http://devresource.hp.com/devresource/Docs/TechPapers/IA64/slit.pdf */ -void __init -acpi_numa_slit_init (struct acpi_table_slit *slit) +void __init acpi_numa_slit_init(struct acpi_table_slit *slit) { u32 len; len = sizeof(struct acpi_table_header) + 8 - + slit->localities * slit->localities; + + slit->localities * slit->localities; if (slit->header.length != len) { - printk(KERN_ERR "ACPI 2.0 SLIT: size mismatch: %d expected, %d actual\n", + printk(KERN_ERR + "ACPI 2.0 SLIT: size mismatch: %d expected, %d actual\n", len, slit->header.length); memset(numa_slit, 10, sizeof(numa_slit)); return; @@ -438,19 +435,20 @@ acpi_numa_slit_init (struct acpi_table_slit *slit) } void __init -acpi_numa_processor_affinity_init (struct acpi_table_processor_affinity *pa) +acpi_numa_processor_affinity_init(struct acpi_table_processor_affinity *pa) { /* record this node in proximity bitmap */ pxm_bit_set(pa->proximity_domain); - node_cpuid[srat_num_cpus].phys_id = (pa->apic_id << 8) | (pa->lsapic_eid); + node_cpuid[srat_num_cpus].phys_id = + (pa->apic_id << 8) | (pa->lsapic_eid); /* nid should be overridden as logical node id later */ node_cpuid[srat_num_cpus].nid = pa->proximity_domain; srat_num_cpus++; } void __init -acpi_numa_memory_affinity_init (struct acpi_table_memory_affinity *ma) +acpi_numa_memory_affinity_init(struct acpi_table_memory_affinity *ma) { unsigned long paddr, size; u8 pxm; @@ -487,8 +485,7 @@ acpi_numa_memory_affinity_init (struct acpi_table_memory_affinity *ma) num_node_memblks++; } -void __init -acpi_numa_arch_fixup (void) +void __init acpi_numa_arch_fixup(void) { int i, j, node_from, node_to; @@ -534,21 +531,24 @@ acpi_numa_arch_fixup (void) for (i = 0; i < srat_num_cpus; i++) node_cpuid[i].nid = pxm_to_nid_map[node_cpuid[i].nid]; - printk(KERN_INFO "Number of logical nodes in system = %d\n", num_online_nodes()); - printk(KERN_INFO "Number of memory chunks in system = %d\n", num_node_memblks); + printk(KERN_INFO "Number of logical nodes in system = %d\n", + num_online_nodes()); + printk(KERN_INFO "Number of memory chunks in system = %d\n", + num_node_memblks); - if (!slit_table) return; + if (!slit_table) + return; memset(numa_slit, -1, sizeof(numa_slit)); - for (i=0; i<slit_table->localities; i++) { + for (i = 0; i < slit_table->localities; i++) { if (!pxm_bit_test(i)) continue; node_from = pxm_to_nid_map[i]; - for (j=0; j<slit_table->localities; j++) { + for (j = 0; j < slit_table->localities; j++) { if (!pxm_bit_test(j)) continue; node_to = pxm_to_nid_map[j]; node_distance(node_from, node_to) = - slit_table->entry[i*slit_table->localities + j]; + slit_table->entry[i * slit_table->localities + j]; } } @@ -556,34 +556,41 @@ acpi_numa_arch_fixup (void) printk("ACPI 2.0 SLIT locality table:\n"); for_each_online_node(i) { for_each_online_node(j) - printk("%03d ", node_distance(i,j)); + printk("%03d ", node_distance(i, j)); printk("\n"); } #endif } -#endif /* CONFIG_ACPI_NUMA */ +#endif /* CONFIG_ACPI_NUMA */ -unsigned int -acpi_register_gsi (u32 gsi, int edge_level, int active_high_low) +/* + * success: return IRQ number (>=0) + * failure: return < 0 + */ +int acpi_register_gsi(u32 gsi, int edge_level, int active_high_low) { if (has_8259 && gsi < 16) return isa_irq_to_vector(gsi); return iosapic_register_intr(gsi, - (active_high_low == ACPI_ACTIVE_HIGH) ? IOSAPIC_POL_HIGH : IOSAPIC_POL_LOW, - (edge_level == ACPI_EDGE_SENSITIVE) ? IOSAPIC_EDGE : IOSAPIC_LEVEL); + (active_high_low == + ACPI_ACTIVE_HIGH) ? IOSAPIC_POL_HIGH : + IOSAPIC_POL_LOW, + (edge_level == + ACPI_EDGE_SENSITIVE) ? IOSAPIC_EDGE : + IOSAPIC_LEVEL); } + EXPORT_SYMBOL(acpi_register_gsi); -void -acpi_unregister_gsi (u32 gsi) +void acpi_unregister_gsi(u32 gsi) { iosapic_unregister_intr(gsi); } + EXPORT_SYMBOL(acpi_unregister_gsi); -static int __init -acpi_parse_fadt (unsigned long phys_addr, unsigned long size) +static int __init acpi_parse_fadt(unsigned long phys_addr, unsigned long size) { struct acpi_table_header *fadt_header; struct fadt_descriptor_rev2 *fadt; @@ -591,11 +598,11 @@ acpi_parse_fadt (unsigned long phys_addr, unsigned long size) if (!phys_addr || !size) return -EINVAL; - fadt_header = (struct acpi_table_header *) __va(phys_addr); + fadt_header = (struct acpi_table_header *)__va(phys_addr); if (fadt_header->revision != 3) - return -ENODEV; /* Only deal with ACPI 2.0 FADT */ + return -ENODEV; /* Only deal with ACPI 2.0 FADT */ - fadt = (struct fadt_descriptor_rev2 *) fadt_header; + fadt = (struct fadt_descriptor_rev2 *)fadt_header; if (!(fadt->iapc_boot_arch & BAF_8042_KEYBOARD_CONTROLLER)) acpi_kbd_controller_present = 0; @@ -607,22 +614,19 @@ acpi_parse_fadt (unsigned long phys_addr, unsigned long size) return 0; } - -unsigned long __init -acpi_find_rsdp (void) +unsigned long __init acpi_find_rsdp(void) { unsigned long rsdp_phys = 0; if (efi.acpi20) rsdp_phys = __pa(efi.acpi20); else if (efi.acpi) - printk(KERN_WARNING PREFIX "v1.0/r0.71 tables no longer supported\n"); + printk(KERN_WARNING PREFIX + "v1.0/r0.71 tables no longer supported\n"); return rsdp_phys; } - -int __init -acpi_boot_init (void) +int __init acpi_boot_init(void) { /* @@ -640,31 +644,43 @@ acpi_boot_init (void) /* Local APIC */ - if (acpi_table_parse_madt(ACPI_MADT_LAPIC_ADDR_OVR, acpi_parse_lapic_addr_ovr, 0) < 0) - printk(KERN_ERR PREFIX "Error parsing LAPIC address override entry\n"); + if (acpi_table_parse_madt + (ACPI_MADT_LAPIC_ADDR_OVR, acpi_parse_lapic_addr_ovr, 0) < 0) + printk(KERN_ERR PREFIX + "Error parsing LAPIC address override entry\n"); - if (acpi_table_parse_madt(ACPI_MADT_LSAPIC, acpi_parse_lsapic, NR_CPUS) < 1) - printk(KERN_ERR PREFIX "Error parsing MADT - no LAPIC entries\n"); + if (acpi_table_parse_madt(ACPI_MADT_LSAPIC, acpi_parse_lsapic, NR_CPUS) + < 1) + printk(KERN_ERR PREFIX + "Error parsing MADT - no LAPIC entries\n"); - if (acpi_table_parse_madt(ACPI_MADT_LAPIC_NMI, acpi_parse_lapic_nmi, 0) < 0) + if (acpi_table_parse_madt(ACPI_MADT_LAPIC_NMI, acpi_parse_lapic_nmi, 0) + < 0) printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n"); /* I/O APIC */ - if (acpi_table_parse_madt(ACPI_MADT_IOSAPIC, acpi_parse_iosapic, NR_IOSAPICS) < 1) - printk(KERN_ERR PREFIX "Error parsing MADT - no IOSAPIC entries\n"); + if (acpi_table_parse_madt + (ACPI_MADT_IOSAPIC, acpi_parse_iosapic, NR_IOSAPICS) < 1) + printk(KERN_ERR PREFIX + "Error parsing MADT - no IOSAPIC entries\n"); /* System-Level Interrupt Routing */ - if (acpi_table_parse_madt(ACPI_MADT_PLAT_INT_SRC, acpi_parse_plat_int_src, ACPI_MAX_PLATFORM_INTERRUPTS) < 0) - printk(KERN_ERR PREFIX "Error parsing platform interrupt source entry\n"); + if (acpi_table_parse_madt + (ACPI_MADT_PLAT_INT_SRC, acpi_parse_plat_int_src, + ACPI_MAX_PLATFORM_INTERRUPTS) < 0) + printk(KERN_ERR PREFIX + "Error parsing platform interrupt source entry\n"); - if (acpi_table_parse_madt(ACPI_MADT_INT_SRC_OVR, acpi_parse_int_src_ovr, 0) < 0) - printk(KERN_ERR PREFIX "Error parsing interrupt source overrides entry\n"); + if (acpi_table_parse_madt + (ACPI_MADT_INT_SRC_OVR, acpi_parse_int_src_ovr, 0) < 0) + printk(KERN_ERR PREFIX + "Error parsing interrupt source overrides entry\n"); if (acpi_table_parse_madt(ACPI_MADT_NMI_SRC, acpi_parse_nmi_src, 0) < 0) printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n"); - skip_madt: + skip_madt: /* * FADT says whether a legacy keyboard controller is present. @@ -679,8 +695,9 @@ acpi_boot_init (void) if (available_cpus == 0) { printk(KERN_INFO "ACPI: Found 0 CPUS; assuming 1\n"); printk(KERN_INFO "CPU 0 (0x%04x)", hard_smp_processor_id()); - smp_boot_data.cpu_phys_id[available_cpus] = hard_smp_processor_id(); - available_cpus = 1; /* We've got at least one of these, no? */ + smp_boot_data.cpu_phys_id[available_cpus] = + hard_smp_processor_id(); + available_cpus = 1; /* We've got at least one of these, no? */ } smp_boot_data.cpu_count = available_cpus; @@ -689,8 +706,10 @@ acpi_boot_init (void) if (srat_num_cpus == 0) { int cpu, i = 1; for (cpu = 0; cpu < smp_boot_data.cpu_count; cpu++) - if (smp_boot_data.cpu_phys_id[cpu] != hard_smp_processor_id()) - node_cpuid[i++].phys_id = smp_boot_data.cpu_phys_id[cpu]; + if (smp_boot_data.cpu_phys_id[cpu] != + hard_smp_processor_id()) + node_cpuid[i++].phys_id = + smp_boot_data.cpu_phys_id[cpu]; } # endif #endif @@ -698,12 +717,12 @@ acpi_boot_init (void) build_cpu_to_node_map(); #endif /* Make boot-up look pretty */ - printk(KERN_INFO "%d CPUs available, %d CPUs total\n", available_cpus, total_cpus); + printk(KERN_INFO "%d CPUs available, %d CPUs total\n", available_cpus, + total_cpus); return 0; } -int -acpi_gsi_to_irq (u32 gsi, unsigned int *irq) +int acpi_gsi_to_irq(u32 gsi, unsigned int *irq) { int vector; @@ -724,11 +743,10 @@ acpi_gsi_to_irq (u32 gsi, unsigned int *irq) */ #ifdef CONFIG_ACPI_HOTPLUG_CPU static -int -acpi_map_cpu2node(acpi_handle handle, int cpu, long physid) +int acpi_map_cpu2node(acpi_handle handle, int cpu, long physid) { #ifdef CONFIG_ACPI_NUMA - int pxm_id; + int pxm_id; pxm_id = acpi_get_pxm(handle); @@ -736,31 +754,28 @@ acpi_map_cpu2node(acpi_handle handle, int cpu, long physid) * Assuming that the container driver would have set the proximity * domain and would have initialized pxm_to_nid_map[pxm_id] && pxm_flag */ - node_cpuid[cpu].nid = (pxm_id < 0) ? 0: - pxm_to_nid_map[pxm_id]; + node_cpuid[cpu].nid = (pxm_id < 0) ? 0 : pxm_to_nid_map[pxm_id]; - node_cpuid[cpu].phys_id = physid; + node_cpuid[cpu].phys_id = physid; #endif - return(0); + return (0); } - -int -acpi_map_lsapic(acpi_handle handle, int *pcpu) +int acpi_map_lsapic(acpi_handle handle, int *pcpu) { - struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL}; + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; union acpi_object *obj; struct acpi_table_lsapic *lsapic; cpumask_t tmp_map; long physid; int cpu; - + if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer))) return -EINVAL; - if (!buffer.length || !buffer.pointer) + if (!buffer.length || !buffer.pointer) return -EINVAL; - + obj = buffer.pointer; if (obj->type != ACPI_TYPE_BUFFER || obj->buffer.length < sizeof(*lsapic)) { @@ -776,7 +791,7 @@ acpi_map_lsapic(acpi_handle handle, int *pcpu) return -EINVAL; } - physid = ((lsapic->id <<8) | (lsapic->eid)); + physid = ((lsapic->id << 8) | (lsapic->eid)); acpi_os_free(buffer.pointer); buffer.length = ACPI_ALLOCATE_BUFFER; @@ -784,50 +799,49 @@ acpi_map_lsapic(acpi_handle handle, int *pcpu) cpus_complement(tmp_map, cpu_present_map); cpu = first_cpu(tmp_map); - if(cpu >= NR_CPUS) + if (cpu >= NR_CPUS) return -EINVAL; acpi_map_cpu2node(handle, cpu, physid); - cpu_set(cpu, cpu_present_map); + cpu_set(cpu, cpu_present_map); ia64_cpu_to_sapicid[cpu] = physid; ia64_acpiid_to_sapicid[lsapic->acpi_id] = ia64_cpu_to_sapicid[cpu]; *pcpu = cpu; - return(0); + return (0); } -EXPORT_SYMBOL(acpi_map_lsapic); +EXPORT_SYMBOL(acpi_map_lsapic); -int -acpi_unmap_lsapic(int cpu) +int acpi_unmap_lsapic(int cpu) { int i; - for (i=0; i<MAX_SAPICS; i++) { - if (ia64_acpiid_to_sapicid[i] == ia64_cpu_to_sapicid[cpu]) { - ia64_acpiid_to_sapicid[i] = -1; - break; - } - } + for (i = 0; i < MAX_SAPICS; i++) { + if (ia64_acpiid_to_sapicid[i] == ia64_cpu_to_sapicid[cpu]) { + ia64_acpiid_to_sapicid[i] = -1; + break; + } + } ia64_cpu_to_sapicid[cpu] = -1; - cpu_clear(cpu,cpu_present_map); + cpu_clear(cpu, cpu_present_map); #ifdef CONFIG_ACPI_NUMA /* NUMA specific cleanup's */ #endif - return(0); + return (0); } + EXPORT_SYMBOL(acpi_unmap_lsapic); -#endif /* CONFIG_ACPI_HOTPLUG_CPU */ - +#endif /* CONFIG_ACPI_HOTPLUG_CPU */ #ifdef CONFIG_ACPI_NUMA acpi_status __devinit -acpi_map_iosapic (acpi_handle handle, u32 depth, void *context, void **ret) +acpi_map_iosapic(acpi_handle handle, u32 depth, void *context, void **ret) { - struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL}; + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; union acpi_object *obj; struct acpi_table_iosapic *iosapic; unsigned int gsi_base; @@ -876,10 +890,9 @@ acpi_map_iosapic (acpi_handle handle, u32 depth, void *context, void **ret) map_iosapic_to_node(gsi_base, node); return AE_OK; } -#endif /* CONFIG_NUMA */ +#endif /* CONFIG_NUMA */ -int -acpi_register_ioapic (acpi_handle handle, u64 phys_addr, u32 gsi_base) +int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base) { int err; @@ -888,17 +901,18 @@ acpi_register_ioapic (acpi_handle handle, u64 phys_addr, u32 gsi_base) #if CONFIG_ACPI_NUMA acpi_map_iosapic(handle, 0, NULL, NULL); -#endif /* CONFIG_ACPI_NUMA */ +#endif /* CONFIG_ACPI_NUMA */ return 0; } + EXPORT_SYMBOL(acpi_register_ioapic); -int -acpi_unregister_ioapic (acpi_handle handle, u32 gsi_base) +int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base) { return iosapic_remove(gsi_base); } + EXPORT_SYMBOL(acpi_unregister_ioapic); -#endif /* CONFIG_ACPI_BOOT */ +#endif /* CONFIG_ACPI */ diff --git a/arch/ia64/kernel/domain.c b/arch/ia64/kernel/domain.c deleted file mode 100644 index bbb8efe..0000000 --- a/arch/ia64/kernel/domain.c +++ /dev/null @@ -1,396 +0,0 @@ -/* - * arch/ia64/kernel/domain.c - * Architecture specific sched-domains builder. - * - * Copyright (C) 2004 Jesse Barnes - * Copyright (C) 2004 Silicon Graphics, Inc. - */ - -#include <linux/sched.h> -#include <linux/percpu.h> -#include <linux/slab.h> -#include <linux/cpumask.h> -#include <linux/init.h> -#include <linux/topology.h> -#include <linux/nodemask.h> - -#define SD_NODES_PER_DOMAIN 16 - -#ifdef CONFIG_NUMA -/** - * find_next_best_node - find the next node to include in a sched_domain - * @node: node whose sched_domain we're building - * @used_nodes: nodes already in the sched_domain - * - * Find the next node to include in a given scheduling domain. Simply - * finds the closest node not already in the @used_nodes map. - * - * Should use nodemask_t. - */ -static int find_next_best_node(int node, unsigned long *used_nodes) -{ - int i, n, val, min_val, best_node = 0; - - min_val = INT_MAX; - - for (i = 0; i < MAX_NUMNODES; i++) { - /* Start at @node */ - n = (node + i) % MAX_NUMNODES; - - if (!nr_cpus_node(n)) - continue; - - /* Skip already used nodes */ - if (test_bit(n, used_nodes)) - continue; - - /* Simple min distance search */ - val = node_distance(node, n); - - if (val < min_val) { - min_val = val; - best_node = n; - } - } - - set_bit(best_node, used_nodes); - return best_node; -} - -/** - * sched_domain_node_span - get a cpumask for a node's sched_domain - * @node: node whose cpumask we're constructing - * @size: number of nodes to include in this span - * - * Given a node, construct a good cpumask for its sched_domain to span. It - * should be one that prevents unnecessary balancing, but also spreads tasks - * out optimally. - */ -static cpumask_t sched_domain_node_span(int node) -{ - int i; - cpumask_t span, nodemask; - DECLARE_BITMAP(used_nodes, MAX_NUMNODES); - - cpus_clear(span); - bitmap_zero(used_nodes, MAX_NUMNODES); - - nodemask = node_to_cpumask(node); - cpus_or(span, span, nodemask); - set_bit(node, used_nodes); - - for (i = 1; i < SD_NODES_PER_DOMAIN; i++) { - int next_node = find_next_best_node(node, used_nodes); - nodemask = node_to_cpumask(next_node); - cpus_or(span, span, nodemask); - } - - return span; -} -#endif - -/* - * At the moment, CONFIG_SCHED_SMT is never defined, but leave it in so we - * can switch it on easily if needed. - */ -#ifdef CONFIG_SCHED_SMT -static DEFINE_PER_CPU(struct sched_domain, cpu_domains); -static struct sched_group sched_group_cpus[NR_CPUS]; -static int cpu_to_cpu_group(int cpu) -{ - return cpu; -} -#endif - -static DEFINE_PER_CPU(struct sched_domain, phys_domains); -static struct sched_group sched_group_phys[NR_CPUS]; -static int cpu_to_phys_group(int cpu) -{ -#ifdef CONFIG_SCHED_SMT - return first_cpu(cpu_sibling_map[cpu]); -#else - return cpu; -#endif -} - -#ifdef CONFIG_NUMA -/* - * The init_sched_build_groups can't handle what we want to do with node - * groups, so roll our own. Now each node has its own list of groups which - * gets dynamically allocated. - */ -static DEFINE_PER_CPU(struct sched_domain, node_domains); -static struct sched_group *sched_group_nodes[MAX_NUMNODES]; - -static DEFINE_PER_CPU(struct sched_domain, allnodes_domains); -static struct sched_group sched_group_allnodes[MAX_NUMNODES]; - -static int cpu_to_allnodes_group(int cpu) -{ - return cpu_to_node(cpu); -} -#endif - -/* - * Build sched domains for a given set of cpus and attach the sched domains - * to the individual cpus - */ -void build_sched_domains(const cpumask_t *cpu_map) -{ - int i; - - /* - * Set up domains for cpus specified by the cpu_map. - */ - for_each_cpu_mask(i, *cpu_map) { - int group; - struct sched_domain *sd = NULL, *p; - cpumask_t nodemask = node_to_cpumask(cpu_to_node(i)); - - cpus_and(nodemask, nodemask, *cpu_map); - -#ifdef CONFIG_NUMA - if (num_online_cpus() - > SD_NODES_PER_DOMAIN*cpus_weight(nodemask)) { - sd = &per_cpu(allnodes_domains, i); - *sd = SD_ALLNODES_INIT; - sd->span = *cpu_map; - group = cpu_to_allnodes_group(i); - sd->groups = &sched_group_allnodes[group]; - p = sd; - } else - p = NULL; - - sd = &per_cpu(node_domains, i); - *sd = SD_NODE_INIT; - sd->span = sched_domain_node_span(cpu_to_node(i)); - sd->parent = p; - cpus_and(sd->span, sd->span, *cpu_map); -#endif - - p = sd; - sd = &per_cpu(phys_domains, i); - group = cpu_to_phys_group(i); - *sd = SD_CPU_INIT; - sd->span = nodemask; - sd->parent = p; - sd->groups = &sched_group_phys[group]; - -#ifdef CONFIG_SCHED_SMT - p = sd; - sd = &per_cpu(cpu_domains, i); - group = cpu_to_cpu_group(i); - *sd = SD_SIBLING_INIT; - sd->span = cpu_sibling_map[i]; - cpus_and(sd->span, sd->span, *cpu_map); - sd->parent = p; - sd->groups = &sched_group_cpus[group]; -#endif - } - -#ifdef CONFIG_SCHED_SMT - /* Set up CPU (sibling) groups */ - for_each_cpu_mask(i, *cpu_map) { - cpumask_t this_sibling_map = cpu_sibling_map[i]; - cpus_and(this_sibling_map, this_sibling_map, *cpu_map); - if (i != first_cpu(this_sibling_map)) - continue; - - init_sched_build_groups(sched_group_cpus, this_sibling_map, - &cpu_to_cpu_group); - } -#endif - - /* Set up physical groups */ - for (i = 0; i < MAX_NUMNODES; i++) { - cpumask_t nodemask = node_to_cpumask(i); - - cpus_and(nodemask, nodemask, *cpu_map); - if (cpus_empty(nodemask)) - continue; - - init_sched_build_groups(sched_group_phys, nodemask, - &cpu_to_phys_group); - } - -#ifdef CONFIG_NUMA - init_sched_build_groups(sched_group_allnodes, *cpu_map, - &cpu_to_allnodes_group); - - for (i = 0; i < MAX_NUMNODES; i++) { - /* Set up node groups */ - struct sched_group *sg, *prev; - cpumask_t nodemask = node_to_cpumask(i); - cpumask_t domainspan; - cpumask_t covered = CPU_MASK_NONE; - int j; - - cpus_and(nodemask, nodemask, *cpu_map); - if (cpus_empty(nodemask)) - continue; - - domainspan = sched_domain_node_span(i); - cpus_and(domainspan, domainspan, *cpu_map); - - sg = kmalloc(sizeof(struct sched_group), GFP_KERNEL); - sched_group_nodes[i] = sg; - for_each_cpu_mask(j, nodemask) { - struct sched_domain *sd; - sd = &per_cpu(node_domains, j); - sd->groups = sg; - if (sd->groups == NULL) { - /* Turn off balancing if we have no groups */ - sd->flags = 0; - } - } - if (!sg) { - printk(KERN_WARNING - "Can not alloc domain group for node %d\n", i); - continue; - } - sg->cpu_power = 0; - sg->cpumask = nodemask; - cpus_or(covered, covered, nodemask); - prev = sg; - - for (j = 0; j < MAX_NUMNODES; j++) { - cpumask_t tmp, notcovered; - int n = (i + j) % MAX_NUMNODES; - - cpus_complement(notcovered, covered); - cpus_and(tmp, notcovered, *cpu_map); - cpus_and(tmp, tmp, domainspan); - if (cpus_empty(tmp)) - break; - - nodemask = node_to_cpumask(n); - cpus_and(tmp, tmp, nodemask); - if (cpus_empty(tmp)) - continue; - - sg = kmalloc(sizeof(struct sched_group), GFP_KERNEL); - if (!sg) { - printk(KERN_WARNING - "Can not alloc domain group for node %d\n", j); - break; - } - sg->cpu_power = 0; - sg->cpumask = tmp; - cpus_or(covered, covered, tmp); - prev->next = sg; - prev = sg; - } - prev->next = sched_group_nodes[i]; - } -#endif - - /* Calculate CPU power for physical packages and nodes */ - for_each_cpu_mask(i, *cpu_map) { - int power; - struct sched_domain *sd; -#ifdef CONFIG_SCHED_SMT - sd = &per_cpu(cpu_domains, i); - power = SCHED_LOAD_SCALE; - sd->groups->cpu_power = power; -#endif - - sd = &per_cpu(phys_domains, i); - power = SCHED_LOAD_SCALE + SCHED_LOAD_SCALE * - (cpus_weight(sd->groups->cpumask)-1) / 10; - sd->groups->cpu_power = power; - -#ifdef CONFIG_NUMA - sd = &per_cpu(allnodes_domains, i); - if (sd->groups) { - power = SCHED_LOAD_SCALE + SCHED_LOAD_SCALE * - (cpus_weight(sd->groups->cpumask)-1) / 10; - sd->groups->cpu_power = power; - } -#endif - } - -#ifdef CONFIG_NUMA - for (i = 0; i < MAX_NUMNODES; i++) { - struct sched_group *sg = sched_group_nodes[i]; - int j; - - if (sg == NULL) - continue; -next_sg: - for_each_cpu_mask(j, sg->cpumask) { - struct sched_domain *sd; - int power; - - sd = &per_cpu(phys_domains, j); - if (j != first_cpu(sd->groups->cpumask)) { - /* - * Only add "power" once for each - * physical package. - */ - continue; - } - power = SCHED_LOAD_SCALE + SCHED_LOAD_SCALE * - (cpus_weight(sd->groups->cpumask)-1) / 10; - - sg->cpu_power += power; - } - sg = sg->next; - if (sg != sched_group_nodes[i]) - goto next_sg; - } -#endif - - /* Attach the domains */ - for_each_cpu_mask(i, *cpu_map) { - struct sched_domain *sd; -#ifdef CONFIG_SCHED_SMT - sd = &per_cpu(cpu_domains, i); -#else - sd = &per_cpu(phys_domains, i); -#endif - cpu_attach_domain(sd, i); - } -} -/* - * Set up scheduler domains and groups. Callers must hold the hotplug lock. - */ -void arch_init_sched_domains(const cpumask_t *cpu_map) -{ - cpumask_t cpu_default_map; - - /* - * Setup mask for cpus without special case scheduling requirements. - * For now this just excludes isolated cpus, but could be used to - * exclude other special cases in the future. - */ - cpus_andnot(cpu_default_map, *cpu_map, cpu_isolated_map); - - build_sched_domains(&cpu_default_map); -} - -void arch_destroy_sched_domains(const cpumask_t *cpu_map) -{ -#ifdef CONFIG_NUMA - int i; - for (i = 0; i < MAX_NUMNODES; i++) { - cpumask_t nodemask = node_to_cpumask(i); - struct sched_group *oldsg, *sg = sched_group_nodes[i]; - - cpus_and(nodemask, nodemask, *cpu_map); - if (cpus_empty(nodemask)) - continue; - - if (sg == NULL) - continue; - sg = sg->next; -next_sg: - oldsg = sg; - sg = sg->next; - kfree(oldsg); - if (oldsg != sched_group_nodes[i]) - goto next_sg; - sched_group_nodes[i] = NULL; - } -#endif -} - diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c index c0c3f55..574084f 100644 --- a/arch/ia64/kernel/iosapic.c +++ b/arch/ia64/kernel/iosapic.c @@ -561,7 +561,7 @@ static inline int vector_is_shared (int vector) return (iosapic_intr_info[vector].count > 1); } -static void +static int register_intr (unsigned int gsi, int vector, unsigned char delivery, unsigned long polarity, unsigned long trigger) { @@ -576,7 +576,7 @@ register_intr (unsigned int gsi, int vector, unsigned char delivery, index = find_iosapic(gsi); if (index < 0) { printk(KERN_WARNING "%s: No IOSAPIC for GSI %u\n", __FUNCTION__, gsi); - return; + return -ENODEV; } iosapic_address = iosapic_lists[index].addr; @@ -587,7 +587,7 @@ register_intr (unsigned int gsi, int vector, unsigned char delivery, rte = iosapic_alloc_rte(); if (!rte) { printk(KERN_WARNING "%s: cannot allocate memory\n", __FUNCTION__); - return; + return -ENOMEM; } rte_index = gsi - gsi_base; @@ -603,7 +603,7 @@ register_intr (unsigned int gsi, int vector, unsigned char delivery, struct iosapic_intr_info *info = &iosapic_intr_info[vector]; if (info->trigger != trigger || info->polarity != polarity) { printk (KERN_WARNING "%s: cannot override the interrupt\n", __FUNCTION__); - return; + return -EINVAL; } } @@ -623,6 +623,7 @@ register_intr (unsigned int gsi, int vector, unsigned char delivery, __FUNCTION__, vector, idesc->handler->typename, irq_type->typename); idesc->handler = irq_type; } + return 0; } static unsigned int @@ -710,7 +711,7 @@ int iosapic_register_intr (unsigned int gsi, unsigned long polarity, unsigned long trigger) { - int vector, mask = 1; + int vector, mask = 1, err; unsigned int dest; unsigned long flags; struct iosapic_rte_info *rte; @@ -737,8 +738,8 @@ again: vector = assign_irq_vector(AUTO_ASSIGN); if (vector < 0) { vector = iosapic_find_sharable_vector(trigger, polarity); - if (vector < 0) - panic("%s: out of interrupt vectors!\n", __FUNCTION__); + if (vector < 0) + return -ENOSPC; } spin_lock_irqsave(&irq_descp(vector)->lock, flags); @@ -753,8 +754,13 @@ again: } dest = get_target_cpu(gsi, vector); - register_intr(gsi, vector, IOSAPIC_LOWEST_PRIORITY, + err = register_intr(gsi, vector, IOSAPIC_LOWEST_PRIORITY, polarity, trigger); + if (err < 0) { + spin_unlock(&iosapic_lock); + spin_unlock_irqrestore(&irq_descp(vector)->lock, flags); + return err; + } /* * If the vector is shared and already unmasked for diff --git a/arch/ia64/kernel/irq.c b/arch/ia64/kernel/irq.c index 28f2aad..205d980 100644 --- a/arch/ia64/kernel/irq.c +++ b/arch/ia64/kernel/irq.c @@ -91,23 +91,8 @@ skip: } #ifdef CONFIG_SMP -/* - * This is updated when the user sets irq affinity via /proc - */ -static cpumask_t __cacheline_aligned pending_irq_cpumask[NR_IRQS]; -static unsigned long pending_irq_redir[BITS_TO_LONGS(NR_IRQS)]; - static char irq_redir [NR_IRQS]; // = { [0 ... NR_IRQS-1] = 1 }; -/* - * Arch specific routine for deferred write to iosapic rte to reprogram - * intr destination. - */ -void proc_set_irq_affinity(unsigned int irq, cpumask_t mask_val) -{ - pending_irq_cpumask[irq] = mask_val; -} - void set_irq_affinity_info (unsigned int irq, int hwid, int redir) { cpumask_t mask = CPU_MASK_NONE; @@ -116,32 +101,10 @@ void set_irq_affinity_info (unsigned int irq, int hwid, int redir) if (irq < NR_IRQS) { irq_affinity[irq] = mask; + set_irq_info(irq, mask); irq_redir[irq] = (char) (redir & 0xff); } } - - -void move_irq(int irq) -{ - /* note - we hold desc->lock */ - cpumask_t tmp; - irq_desc_t *desc = irq_descp(irq); - int redir = test_bit(irq, pending_irq_redir); - - if (unlikely(!desc->handler->set_affinity)) - return; - - if (!cpus_empty(pending_irq_cpumask[irq])) { - cpus_and(tmp, pending_irq_cpumask[irq], cpu_online_map); - if (unlikely(!cpus_empty(tmp))) { - desc->handler->set_affinity(irq | (redir ? IA64_IRQ_REDIRECTED : 0), - pending_irq_cpumask[irq]); - } - cpus_clear(pending_irq_cpumask[irq]); - } -} - - #endif /* CONFIG_SMP */ #ifdef CONFIG_HOTPLUG_CPU diff --git a/arch/ia64/kernel/jprobes.S b/arch/ia64/kernel/jprobes.S index b7fa3cc..2323377 100644 --- a/arch/ia64/kernel/jprobes.S +++ b/arch/ia64/kernel/jprobes.S @@ -49,6 +49,7 @@ /* * void jprobe_break(void) */ + .section .kprobes.text, "ax" ENTRY(jprobe_break) break.m 0x80300 END(jprobe_break) diff --git a/arch/ia64/kernel/kprobes.c b/arch/ia64/kernel/kprobes.c index 884f5cd..471086b 100644 --- a/arch/ia64/kernel/kprobes.c +++ b/arch/ia64/kernel/kprobes.c @@ -87,12 +87,25 @@ static enum instruction_type bundle_encoding[32][3] = { * is IP relative instruction and update the kprobe * inst flag accordingly */ -static void update_kprobe_inst_flag(uint template, uint slot, uint major_opcode, - unsigned long kprobe_inst, struct kprobe *p) +static void __kprobes update_kprobe_inst_flag(uint template, uint slot, + uint major_opcode, + unsigned long kprobe_inst, + struct kprobe *p) { p->ainsn.inst_flag = 0; p->ainsn.target_br_reg = 0; + /* Check for Break instruction + * Bits 37:40 Major opcode to be zero + * Bits 27:32 X6 to be zero + * Bits 32:35 X3 to be zero + */ + if ((!major_opcode) && (!((kprobe_inst >> 27) & 0x1FF)) ) { + /* is a break instruction */ + p->ainsn.inst_flag |= INST_FLAG_BREAK_INST; + return; + } + if (bundle_encoding[template][slot] == B) { switch (major_opcode) { case INDIRECT_CALL_OPCODE: @@ -126,8 +139,10 @@ static void update_kprobe_inst_flag(uint template, uint slot, uint major_opcode * Returns 0 if supported * Returns -EINVAL if unsupported */ -static int unsupported_inst(uint template, uint slot, uint major_opcode, - unsigned long kprobe_inst, struct kprobe *p) +static int __kprobes unsupported_inst(uint template, uint slot, + uint major_opcode, + unsigned long kprobe_inst, + struct kprobe *p) { unsigned long addr = (unsigned long)p->addr; @@ -168,8 +183,9 @@ static int unsupported_inst(uint template, uint slot, uint major_opcode, * on which we are inserting kprobe is cmp instruction * with ctype as unc. */ -static uint is_cmp_ctype_unc_inst(uint template, uint slot, uint major_opcode, -unsigned long kprobe_inst) +static uint __kprobes is_cmp_ctype_unc_inst(uint template, uint slot, + uint major_opcode, + unsigned long kprobe_inst) { cmp_inst_t cmp_inst; uint ctype_unc = 0; @@ -201,8 +217,10 @@ out: * In this function we override the bundle with * the break instruction at the given slot. */ -static void prepare_break_inst(uint template, uint slot, uint major_opcode, - unsigned long kprobe_inst, struct kprobe *p) +static void __kprobes prepare_break_inst(uint template, uint slot, + uint major_opcode, + unsigned long kprobe_inst, + struct kprobe *p) { unsigned long break_inst = BREAK_INST; bundle_t *bundle = &p->ainsn.insn.bundle; @@ -271,7 +289,8 @@ static inline int in_ivt_functions(unsigned long addr) && addr < (unsigned long)__end_ivt_text); } -static int valid_kprobe_addr(int template, int slot, unsigned long addr) +static int __kprobes valid_kprobe_addr(int template, int slot, + unsigned long addr) { if ((slot > 2) || ((bundle_encoding[template][1] == L) && slot > 1)) { printk(KERN_WARNING "Attempting to insert unaligned kprobe " @@ -323,7 +342,7 @@ static void kretprobe_trampoline(void) * - cleanup by marking the instance as unused * - long jump back to the original return address */ -int trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) +int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) { struct kretprobe_instance *ri = NULL; struct hlist_head *head; @@ -381,7 +400,8 @@ int trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) return 1; } -void arch_prepare_kretprobe(struct kretprobe *rp, struct pt_regs *regs) +void __kprobes arch_prepare_kretprobe(struct kretprobe *rp, + struct pt_regs *regs) { struct kretprobe_instance *ri; @@ -399,7 +419,7 @@ void arch_prepare_kretprobe(struct kretprobe *rp, struct pt_regs *regs) } } -int arch_prepare_kprobe(struct kprobe *p) +int __kprobes arch_prepare_kprobe(struct kprobe *p) { unsigned long addr = (unsigned long) p->addr; unsigned long *kprobe_addr = (unsigned long *)(addr & ~0xFULL); @@ -430,7 +450,7 @@ int arch_prepare_kprobe(struct kprobe *p) return 0; } -void arch_arm_kprobe(struct kprobe *p) +void __kprobes arch_arm_kprobe(struct kprobe *p) { unsigned long addr = (unsigned long)p->addr; unsigned long arm_addr = addr & ~0xFULL; @@ -439,7 +459,7 @@ void arch_arm_kprobe(struct kprobe *p) flush_icache_range(arm_addr, arm_addr + sizeof(bundle_t)); } -void arch_disarm_kprobe(struct kprobe *p) +void __kprobes arch_disarm_kprobe(struct kprobe *p) { unsigned long addr = (unsigned long)p->addr; unsigned long arm_addr = addr & ~0xFULL; @@ -449,7 +469,7 @@ void arch_disarm_kprobe(struct kprobe *p) flush_icache_range(arm_addr, arm_addr + sizeof(bundle_t)); } -void arch_remove_kprobe(struct kprobe *p) +void __kprobes arch_remove_kprobe(struct kprobe *p) { } @@ -461,7 +481,7 @@ void arch_remove_kprobe(struct kprobe *p) * to original stack address, handle the case where we need to fixup the * relative IP address and/or fixup branch register. */ -static void resume_execution(struct kprobe *p, struct pt_regs *regs) +static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) { unsigned long bundle_addr = ((unsigned long) (&p->opcode.bundle)) & ~0xFULL; unsigned long resume_addr = (unsigned long)p->addr & ~0xFULL; @@ -528,13 +548,16 @@ turn_ss_off: ia64_psr(regs)->ss = 0; } -static void prepare_ss(struct kprobe *p, struct pt_regs *regs) +static void __kprobes prepare_ss(struct kprobe *p, struct pt_regs *regs) { unsigned long bundle_addr = (unsigned long) &p->opcode.bundle; unsigned long slot = (unsigned long)p->addr & 0xf; - /* Update instruction pointer (IIP) and slot number (IPSR.ri) */ - regs->cr_iip = bundle_addr & ~0xFULL; + /* single step inline if break instruction */ + if (p->ainsn.inst_flag == INST_FLAG_BREAK_INST) + regs->cr_iip = (unsigned long)p->addr & ~0xFULL; + else + regs->cr_iip = bundle_addr & ~0xFULL; if (slot > 2) slot = 0; @@ -545,7 +568,39 @@ static void prepare_ss(struct kprobe *p, struct pt_regs *regs) ia64_psr(regs)->ss = 1; } -static int pre_kprobes_handler(struct die_args *args) +static int __kprobes is_ia64_break_inst(struct pt_regs *regs) +{ + unsigned int slot = ia64_psr(regs)->ri; + unsigned int template, major_opcode; + unsigned long kprobe_inst; + unsigned long *kprobe_addr = (unsigned long *)regs->cr_iip; + bundle_t bundle; + + memcpy(&bundle, kprobe_addr, sizeof(bundle_t)); + template = bundle.quad0.template; + + /* Move to slot 2, if bundle is MLX type and kprobe slot is 1 */ + if (slot == 1 && bundle_encoding[template][1] == L) + slot++; + + /* Get Kprobe probe instruction at given slot*/ + get_kprobe_inst(&bundle, slot, &kprobe_inst, &major_opcode); + + /* For break instruction, + * Bits 37:40 Major opcode to be zero + * Bits 27:32 X6 to be zero + * Bits 32:35 X3 to be zero + */ + if (major_opcode || ((kprobe_inst >> 27) & 0x1FF) ) { + /* Not a break instruction */ + return 0; + } + + /* Is a break instruction */ + return 1; +} + +static int __kprobes pre_kprobes_handler(struct die_args *args) { struct kprobe *p; int ret = 0; @@ -558,7 +613,9 @@ static int pre_kprobes_handler(struct die_args *args) if (kprobe_running()) { p = get_kprobe(addr); if (p) { - if (kprobe_status == KPROBE_HIT_SS) { + if ( (kprobe_status == KPROBE_HIT_SS) && + (p->ainsn.inst_flag == INST_FLAG_BREAK_INST)) { + ia64_psr(regs)->ss = 0; unlock_kprobes(); goto no_kprobe; } @@ -592,6 +649,19 @@ static int pre_kprobes_handler(struct die_args *args) p = get_kprobe(addr); if (!p) { unlock_kprobes(); + if (!is_ia64_break_inst(regs)) { + /* + * The breakpoint instruction was removed right + * after we hit it. Another cpu has removed + * either a probepoint or a debugger breakpoint + * at this address. In either case, no further + * handling of this interrupt is appropriate. + */ + ret = 1; + + } + + /* Not one of our break, let kernel handle it */ goto no_kprobe; } @@ -616,7 +686,7 @@ no_kprobe: return ret; } -static int post_kprobes_handler(struct pt_regs *regs) +static int __kprobes post_kprobes_handler(struct pt_regs *regs) { if (!kprobe_running()) return 0; @@ -641,7 +711,7 @@ out: return 1; } -static int kprobes_fault_handler(struct pt_regs *regs, int trapnr) +static int __kprobes kprobes_fault_handler(struct pt_regs *regs, int trapnr) { if (!kprobe_running()) return 0; @@ -659,8 +729,8 @@ static int kprobes_fault_handler(struct pt_regs *regs, int trapnr) return 0; } -int kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, - void *data) +int __kprobes kprobe_exceptions_notify(struct notifier_block *self, + unsigned long val, void *data) { struct die_args *args = (struct die_args *)data; switch(val) { @@ -681,7 +751,7 @@ int kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, return NOTIFY_DONE; } -int setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) +int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) { struct jprobe *jp = container_of(p, struct jprobe, kp); unsigned long addr = ((struct fnptr *)(jp->entry))->ip; @@ -703,7 +773,7 @@ int setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) return 1; } -int longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) +int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) { *regs = jprobe_saved_regs; return 1; diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index 84f89da..1f5c26d 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -384,7 +384,7 @@ setup_arch (char **cmdline_p) if (early_console_setup(*cmdline_p) == 0) mark_bsp_online(); -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI /* Initialize the ACPI boot-time table parser */ acpi_table_init(); # ifdef CONFIG_ACPI_NUMA @@ -420,7 +420,7 @@ setup_arch (char **cmdline_p) cpu_init(); /* initialize the bootstrap CPU */ -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI acpi_boot_init(); #endif diff --git a/arch/ia64/kernel/topology.c b/arch/ia64/kernel/topology.c index 92ff46a..706b773 100644 --- a/arch/ia64/kernel/topology.c +++ b/arch/ia64/kernel/topology.c @@ -36,7 +36,7 @@ int arch_register_cpu(int num) parent = &sysfs_nodes[cpu_to_node(num)]; #endif /* CONFIG_NUMA */ -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI /* * If CPEI cannot be re-targetted, and this is * CPEI target, then dont create the control file diff --git a/arch/ia64/kernel/traps.c b/arch/ia64/kernel/traps.c index 4440c83..f970359 100644 --- a/arch/ia64/kernel/traps.c +++ b/arch/ia64/kernel/traps.c @@ -15,6 +15,7 @@ #include <linux/vt_kern.h> /* For unblank_screen() */ #include <linux/module.h> /* for EXPORT_SYMBOL */ #include <linux/hardirq.h> +#include <linux/kprobes.h> #include <asm/fpswa.h> #include <asm/ia32.h> @@ -122,7 +123,7 @@ die_if_kernel (char *str, struct pt_regs *regs, long err) } void -ia64_bad_break (unsigned long break_num, struct pt_regs *regs) +__kprobes ia64_bad_break (unsigned long break_num, struct pt_regs *regs) { siginfo_t siginfo; int sig, code; @@ -444,7 +445,7 @@ ia64_illegal_op_fault (unsigned long ec, long arg1, long arg2, long arg3, return rv; } -void +void __kprobes ia64_fault (unsigned long vector, unsigned long isr, unsigned long ifa, unsigned long iim, unsigned long itir, long arg5, long arg6, long arg7, struct pt_regs regs) diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S index a676e79..30d8564 100644 --- a/arch/ia64/kernel/vmlinux.lds.S +++ b/arch/ia64/kernel/vmlinux.lds.S @@ -48,6 +48,7 @@ SECTIONS *(.text) SCHED_TEXT LOCK_TEXT + KPROBES_TEXT *(.gnu.linkonce.t*) } .text2 : AT(ADDR(.text2) - LOAD_OFFSET) diff --git a/arch/ia64/lib/flush.S b/arch/ia64/lib/flush.S index 3e2cfa2..2a0d27f 100644 --- a/arch/ia64/lib/flush.S +++ b/arch/ia64/lib/flush.S @@ -20,6 +20,7 @@ * * Note: "in0" and "in1" are preserved for debugging purposes. */ + .section .kprobes.text,"ax" GLOBAL_ENTRY(flush_icache_range) .prologue diff --git a/arch/ia64/mm/fault.c b/arch/ia64/mm/fault.c index 839d4f1..3c32af9 100644 --- a/arch/ia64/mm/fault.c +++ b/arch/ia64/mm/fault.c @@ -9,6 +9,7 @@ #include <linux/mm.h> #include <linux/smp_lock.h> #include <linux/interrupt.h> +#include <linux/kprobes.h> #include <asm/pgtable.h> #include <asm/processor.h> @@ -76,7 +77,7 @@ mapped_kernel_page_is_present (unsigned long address) return pte_present(pte); } -void +void __kprobes ia64_do_page_fault (unsigned long address, unsigned long isr, struct pt_regs *regs) { int signal = SIGSEGV, code = SEGV_MAPERR; diff --git a/arch/ia64/sn/kernel/io_init.c b/arch/ia64/sn/kernel/io_init.c index 4564ed0..906622d 100644 --- a/arch/ia64/sn/kernel/io_init.c +++ b/arch/ia64/sn/kernel/io_init.c @@ -431,7 +431,7 @@ void sn_bus_store_sysdata(struct pci_dev *dev) { struct sysdata_el *element; - element = kcalloc(1, sizeof(struct sysdata_el), GFP_KERNEL); + element = kzalloc(sizeof(struct sysdata_el), GFP_KERNEL); if (!element) { dev_dbg(dev, "%s: out of memory!\n", __FUNCTION__); return; diff --git a/arch/ia64/sn/kernel/irq.c b/arch/ia64/sn/kernel/irq.c index 9fc7463..01d18b7 100644 --- a/arch/ia64/sn/kernel/irq.c +++ b/arch/ia64/sn/kernel/irq.c @@ -23,7 +23,7 @@ static void force_interrupt(int irq); static void register_intr_pda(struct sn_irq_info *sn_irq_info); static void unregister_intr_pda(struct sn_irq_info *sn_irq_info); -extern int sn_force_interrupt_flag; +int sn_force_interrupt_flag = 1; extern int sn_ioif_inited; static struct list_head **sn_irq_lh; static spinlock_t sn_irq_info_lock = SPIN_LOCK_UNLOCKED; /* non-IRQ lock */ diff --git a/arch/ia64/sn/kernel/sn2/sn_proc_fs.c b/arch/ia64/sn/kernel/sn2/sn_proc_fs.c index 51bf827..a06719d 100644 --- a/arch/ia64/sn/kernel/sn2/sn_proc_fs.c +++ b/arch/ia64/sn/kernel/sn2/sn_proc_fs.c @@ -52,7 +52,7 @@ static int licenseID_open(struct inode *inode, struct file *file) * the bridge chip. The hardware will then send an interrupt message if the * interrupt line is active. This mimics a level sensitive interrupt. */ -int sn_force_interrupt_flag = 1; +extern int sn_force_interrupt_flag; static int sn_force_interrupt_show(struct seq_file *s, void *p) { diff --git a/arch/ia64/sn/kernel/tiocx.c b/arch/ia64/sn/kernel/tiocx.c index 254fe15..b45db51 100644 --- a/arch/ia64/sn/kernel/tiocx.c +++ b/arch/ia64/sn/kernel/tiocx.c @@ -191,7 +191,7 @@ cx_device_register(nasid_t nasid, int part_num, int mfg_num, { struct cx_dev *cx_dev; - cx_dev = kcalloc(1, sizeof(struct cx_dev), GFP_KERNEL); + cx_dev = kzalloc(sizeof(struct cx_dev), GFP_KERNEL); DBG("cx_dev= 0x%p\n", cx_dev); if (cx_dev == NULL) return -ENOMEM; diff --git a/arch/ia64/sn/pci/tioca_provider.c b/arch/ia64/sn/pci/tioca_provider.c index ea09c12..19bced3 100644 --- a/arch/ia64/sn/pci/tioca_provider.c +++ b/arch/ia64/sn/pci/tioca_provider.c @@ -148,7 +148,7 @@ tioca_gart_init(struct tioca_kernel *tioca_kern) tioca_kern->ca_pcigart_entries = tioca_kern->ca_pciap_size / tioca_kern->ca_ap_pagesize; tioca_kern->ca_pcigart_pagemap = - kcalloc(1, tioca_kern->ca_pcigart_entries / 8, GFP_KERNEL); + kzalloc(tioca_kern->ca_pcigart_entries / 8, GFP_KERNEL); if (!tioca_kern->ca_pcigart_pagemap) { free_pages((unsigned long)tioca_kern->ca_gart, get_order(tioca_kern->ca_gart_size)); @@ -392,7 +392,7 @@ tioca_dma_mapped(struct pci_dev *pdev, uint64_t paddr, size_t req_size) * allocate a map struct */ - ca_dmamap = kcalloc(1, sizeof(struct tioca_dmamap), GFP_ATOMIC); + ca_dmamap = kzalloc(sizeof(struct tioca_dmamap), GFP_ATOMIC); if (!ca_dmamap) goto map_return; @@ -600,7 +600,7 @@ tioca_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont * Allocate kernel bus soft and copy from prom. */ - tioca_common = kcalloc(1, sizeof(struct tioca_common), GFP_KERNEL); + tioca_common = kzalloc(sizeof(struct tioca_common), GFP_KERNEL); if (!tioca_common) return NULL; @@ -609,7 +609,7 @@ tioca_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont /* init kernel-private area */ - tioca_kern = kcalloc(1, sizeof(struct tioca_kernel), GFP_KERNEL); + tioca_kern = kzalloc(sizeof(struct tioca_kernel), GFP_KERNEL); if (!tioca_kern) { kfree(tioca_common); return NULL; diff --git a/arch/m32r/kernel/time.c b/arch/m32r/kernel/time.c index 8a2b77b..539c562 100644 --- a/arch/m32r/kernel/time.c +++ b/arch/m32r/kernel/time.c @@ -171,10 +171,7 @@ int do_settimeofday(struct timespec *tv) set_normalized_timespec(&xtime, sec, nsec); set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); clock_was_set(); @@ -221,7 +218,7 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) * called as close as possible to 500 ms before the new second starts. */ write_seqlock(&xtime_lock); - if ((time_status & STA_UNSYNC) == 0 + if (ntp_synced() && xtime.tv_sec > last_rtc_update + 660 && (xtime.tv_nsec / 1000) >= 500000 - ((unsigned)TICK_SIZE) / 2 && (xtime.tv_nsec / 1000) <= 500000 + ((unsigned)TICK_SIZE) / 2) diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 178c4a3..ba960bb 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -25,6 +25,11 @@ config GENERIC_CALIBRATE_DELAY bool default y +config ARCH_MAY_HAVE_PC_FDC + bool + depends on Q40 || (BROKEN && SUN3X) + default y + mainmenu "Linux/68k Kernel Configuration" source "init/Kconfig" diff --git a/arch/m68k/bvme6000/rtc.c b/arch/m68k/bvme6000/rtc.c index c6b2a41..eb63ca6 100644 --- a/arch/m68k/bvme6000/rtc.c +++ b/arch/m68k/bvme6000/rtc.c @@ -14,6 +14,7 @@ #include <linux/fcntl.h> #include <linux/init.h> #include <linux/poll.h> +#include <linux/module.h> #include <linux/mc146818rtc.h> /* For struct rtc_time and ioctls, etc */ #include <linux/smp_lock.h> #include <asm/bvme6000hw.h> @@ -171,7 +172,7 @@ static struct miscdevice rtc_dev = { .fops = &rtc_fops }; -int __init rtc_DP8570A_init(void) +static int __init rtc_DP8570A_init(void) { if (!MACH_IS_BVME6000) return -ENODEV; @@ -179,4 +180,4 @@ int __init rtc_DP8570A_init(void) printk(KERN_INFO "DP8570A Real Time Clock Driver v%s\n", RTC_VERSION); return misc_register(&rtc_dev); } - +module_init(rtc_DP8570A_init); diff --git a/arch/m68k/kernel/time.c b/arch/m68k/kernel/time.c index e47e195..4ec95e3 100644 --- a/arch/m68k/kernel/time.c +++ b/arch/m68k/kernel/time.c @@ -166,10 +166,7 @@ int do_settimeofday(struct timespec *tv) set_normalized_timespec(&xtime, sec, nsec); set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); clock_was_set(); return 0; diff --git a/arch/m68k/mvme16x/rtc.c b/arch/m68k/mvme16x/rtc.c index 8a24250..7977eae 100644 --- a/arch/m68k/mvme16x/rtc.c +++ b/arch/m68k/mvme16x/rtc.c @@ -161,7 +161,7 @@ static struct miscdevice rtc_dev= .fops = &rtc_fops }; -int __init rtc_MK48T08_init(void) +static int __init rtc_MK48T08_init(void) { if (!MACH_IS_MVME16x) return -ENODEV; @@ -169,4 +169,4 @@ int __init rtc_MK48T08_init(void) printk(KERN_INFO "MK48T08 Real Time Clock Driver v%s\n", RTC_VERSION); return misc_register(&rtc_dev); } - +module_init(rtc_MK48T08_init); diff --git a/arch/m68knommu/kernel/time.c b/arch/m68knommu/kernel/time.c index 5c3ca67..b17c1ec 100644 --- a/arch/m68knommu/kernel/time.c +++ b/arch/m68knommu/kernel/time.c @@ -68,7 +68,7 @@ static irqreturn_t timer_interrupt(int irq, void *dummy, struct pt_regs * regs) * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be * called as close as possible to 500 ms before the new second starts. */ - if ((time_status & STA_UNSYNC) == 0 && + if (ntp_synced() && xtime.tv_sec > last_rtc_update + 660 && (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 && (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) { @@ -178,10 +178,7 @@ int do_settimeofday(struct timespec *tv) set_normalized_timespec(&xtime, sec, nsec); set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); clock_was_set(); return 0; diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index d79fba0..8d76eb1 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -4,6 +4,11 @@ config MIPS # Horrible source of confusion. Die, die, die ... select EMBEDDED +# shouldn't it be per-subarchitecture? +config ARCH_MAY_HAVE_PC_FDC + bool + default y + mainmenu "Linux/MIPS Kernel Configuration" source "init/Kconfig" diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c index 4613219..ece4564 100644 --- a/arch/mips/kernel/linux32.c +++ b/arch/mips/kernel/linux32.c @@ -546,20 +546,20 @@ struct msgbuf32 { s32 mtype; char mtext[1]; }; struct ipc_perm32 { key_t key; - compat_uid_t uid; - compat_gid_t gid; - compat_uid_t cuid; - compat_gid_t cgid; + __compat_uid_t uid; + __compat_gid_t gid; + __compat_uid_t cuid; + __compat_gid_t cgid; compat_mode_t mode; unsigned short seq; }; struct ipc64_perm32 { key_t key; - compat_uid_t uid; - compat_gid_t gid; - compat_uid_t cuid; - compat_gid_t cgid; + __compat_uid_t uid; + __compat_gid_t gid; + __compat_uid_t cuid; + __compat_gid_t cgid; compat_mode_t mode; unsigned short seq; unsigned short __pad1; diff --git a/arch/mips/kernel/sysirix.c b/arch/mips/kernel/sysirix.c index f3bf0e4..b465954 100644 --- a/arch/mips/kernel/sysirix.c +++ b/arch/mips/kernel/sysirix.c @@ -632,10 +632,7 @@ asmlinkage int irix_stime(int value) write_seqlock_irq(&xtime_lock); xtime.tv_sec = value; xtime.tv_nsec = 0; - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); return 0; diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c index 648c822..0dd0df7a 100644 --- a/arch/mips/kernel/time.c +++ b/arch/mips/kernel/time.c @@ -223,10 +223,7 @@ int do_settimeofday(struct timespec *tv) set_normalized_timespec(&xtime, sec, nsec); set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); clock_was_set(); @@ -442,7 +439,7 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) * called as close as possible to 500 ms before the new second starts. */ write_seqlock(&xtime_lock); - if ((time_status & STA_UNSYNC) == 0 && + if (ntp_synced() && xtime.tv_sec > last_rtc_update + 660 && (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 && (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) { diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c index 8c1b96f..cddf1ce 100644 --- a/arch/mips/sgi-ip27/ip27-timer.c +++ b/arch/mips/sgi-ip27/ip27-timer.c @@ -118,7 +118,7 @@ again: * RTC clock accordingly every ~11 minutes. Set_rtc_mmss() has to be * called as close as possible to when a second starts. */ - if ((time_status & STA_UNSYNC) == 0 && + if (ntp_synced() && xtime.tv_sec > last_rtc_update + 660 && (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 && (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) { diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index 1c2d874..0b07922 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -49,6 +49,10 @@ config ISA_DMA_API bool default y +config ARCH_MAY_HAVE_PC_FDC + bool + default y + source "init/Kconfig" diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c index 6cf7407..7ff67f8 100644 --- a/arch/parisc/kernel/time.c +++ b/arch/parisc/kernel/time.c @@ -188,10 +188,7 @@ do_settimeofday (struct timespec *tv) set_normalized_timespec(&xtime, sec, nsec); set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); } write_sequnlock_irq(&xtime_lock); clock_was_set(); diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index 36dee0f..6ab7e5e 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -47,6 +47,10 @@ config SCHED_NO_NO_OMIT_FRAME_POINTER bool default y +config ARCH_MAY_HAVE_PC_FDC + bool + default y + source "init/Kconfig" menu "Processor" diff --git a/arch/ppc/kernel/head_4xx.S b/arch/ppc/kernel/head_4xx.S index 0a5e723..ca9518b 100644 --- a/arch/ppc/kernel/head_4xx.S +++ b/arch/ppc/kernel/head_4xx.S @@ -453,6 +453,7 @@ label: #else CRITICAL_EXCEPTION(0x1020, WDTException, UnknownException) #endif +#endif /* 0x1100 - Data TLB Miss Exception * As the name implies, translation is not in the MMU, so search the diff --git a/arch/ppc/kernel/time.c b/arch/ppc/kernel/time.c index bf4ddca..a3c5281 100644 --- a/arch/ppc/kernel/time.c +++ b/arch/ppc/kernel/time.c @@ -169,7 +169,7 @@ void timer_interrupt(struct pt_regs * regs) * We should have an rtc call that only sets the minutes and * seconds like on Intel to avoid problems with non UTC clocks. */ - if ( ppc_md.set_rtc_time && (time_status & STA_UNSYNC) == 0 && + if ( ppc_md.set_rtc_time && ntp_synced() && xtime.tv_sec - last_rtc_update >= 659 && abs((xtime.tv_nsec / 1000) - (1000000-1000000/HZ)) < 500000/HZ && jiffies - wall_jiffies == 1) { @@ -271,10 +271,7 @@ int do_settimeofday(struct timespec *tv) */ last_rtc_update = new_sec - 658; - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irqrestore(&xtime_lock, flags); clock_was_set(); return 0; diff --git a/arch/ppc/syslib/ocp.c b/arch/ppc/syslib/ocp.c index e5fd2ae..9ccce43 100644 --- a/arch/ppc/syslib/ocp.c +++ b/arch/ppc/syslib/ocp.c @@ -165,7 +165,7 @@ ocp_device_remove(struct device *dev) } static int -ocp_device_suspend(struct device *dev, u32 state) +ocp_device_suspend(struct device *dev, pm_message_t state) { struct ocp_device *ocp_dev = to_ocp_dev(dev); struct ocp_driver *ocp_drv = to_ocp_drv(dev->driver); diff --git a/arch/ppc64/Kconfig b/arch/ppc64/Kconfig index 13b262f..deca68a 100644 --- a/arch/ppc64/Kconfig +++ b/arch/ppc64/Kconfig @@ -44,6 +44,10 @@ config SCHED_NO_NO_OMIT_FRAME_POINTER bool default y +config ARCH_MAY_HAVE_PC_FDC + bool + default y + # We optimistically allocate largepages from the VM, so make the limit # large enough (16MB). This badly named config option is actually # max order + 1 diff --git a/arch/ppc64/Makefile b/arch/ppc64/Makefile index 6350cce..8189953 100644 --- a/arch/ppc64/Makefile +++ b/arch/ppc64/Makefile @@ -49,7 +49,7 @@ NM := $(NM) --synthetic endif -CHECKFLAGS += -m64 -D__powerpc__ +CHECKFLAGS += -m64 -D__powerpc__ -D__powerpc64__ LDFLAGS := -m elf64ppc LDFLAGS_vmlinux := -Bstatic -e $(KERNELLOAD) -Ttext $(KERNELLOAD) diff --git a/arch/ppc64/kernel/kprobes.c b/arch/ppc64/kernel/kprobes.c index a3d5195..7e80d49 100644 --- a/arch/ppc64/kernel/kprobes.c +++ b/arch/ppc64/kernel/kprobes.c @@ -44,7 +44,7 @@ static struct kprobe *kprobe_prev; static unsigned long kprobe_status_prev, kprobe_saved_msr_prev; static struct pt_regs jprobe_saved_regs; -int arch_prepare_kprobe(struct kprobe *p) +int __kprobes arch_prepare_kprobe(struct kprobe *p) { int ret = 0; kprobe_opcode_t insn = *p->addr; @@ -68,27 +68,27 @@ int arch_prepare_kprobe(struct kprobe *p) return ret; } -void arch_copy_kprobe(struct kprobe *p) +void __kprobes arch_copy_kprobe(struct kprobe *p) { memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t)); p->opcode = *p->addr; } -void arch_arm_kprobe(struct kprobe *p) +void __kprobes arch_arm_kprobe(struct kprobe *p) { *p->addr = BREAKPOINT_INSTRUCTION; flush_icache_range((unsigned long) p->addr, (unsigned long) p->addr + sizeof(kprobe_opcode_t)); } -void arch_disarm_kprobe(struct kprobe *p) +void __kprobes arch_disarm_kprobe(struct kprobe *p) { *p->addr = p->opcode; flush_icache_range((unsigned long) p->addr, (unsigned long) p->addr + sizeof(kprobe_opcode_t)); } -void arch_remove_kprobe(struct kprobe *p) +void __kprobes arch_remove_kprobe(struct kprobe *p) { up(&kprobe_mutex); free_insn_slot(p->ainsn.insn); @@ -102,7 +102,7 @@ static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs) regs->msr |= MSR_SE; /* single step inline if it is a trap variant */ - if (IS_TW(insn) || IS_TD(insn) || IS_TWI(insn) || IS_TDI(insn)) + if (is_trap(insn)) regs->nip = (unsigned long)p->addr; else regs->nip = (unsigned long)p->ainsn.insn; @@ -122,7 +122,8 @@ static inline void restore_previous_kprobe(void) kprobe_saved_msr = kprobe_saved_msr_prev; } -void arch_prepare_kretprobe(struct kretprobe *rp, struct pt_regs *regs) +void __kprobes arch_prepare_kretprobe(struct kretprobe *rp, + struct pt_regs *regs) { struct kretprobe_instance *ri; @@ -151,7 +152,9 @@ static inline int kprobe_handler(struct pt_regs *regs) Disarm the probe we just hit, and ignore it. */ p = get_kprobe(addr); if (p) { - if (kprobe_status == KPROBE_HIT_SS) { + kprobe_opcode_t insn = *p->ainsn.insn; + if (kprobe_status == KPROBE_HIT_SS && + is_trap(insn)) { regs->msr &= ~MSR_SE; regs->msr |= kprobe_saved_msr; unlock_kprobes(); @@ -191,8 +194,7 @@ static inline int kprobe_handler(struct pt_regs *regs) * trap variant, it could belong to someone else */ kprobe_opcode_t cur_insn = *addr; - if (IS_TW(cur_insn) || IS_TD(cur_insn) || - IS_TWI(cur_insn) || IS_TDI(cur_insn)) + if (is_trap(cur_insn)) goto no_kprobe; /* * The breakpoint instruction was removed right @@ -244,7 +246,7 @@ void kretprobe_trampoline_holder(void) /* * Called when the probe at kretprobe trampoline is hit */ -int trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) +int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) { struct kretprobe_instance *ri = NULL; struct hlist_head *head; @@ -308,7 +310,7 @@ int trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) * single-stepped a copy of the instruction. The address of this * copy is p->ainsn.insn. */ -static void resume_execution(struct kprobe *p, struct pt_regs *regs) +static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) { int ret; unsigned int insn = *p->ainsn.insn; @@ -373,8 +375,8 @@ static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr) /* * Wrapper routine to for handling exceptions. */ -int kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, - void *data) +int __kprobes kprobe_exceptions_notify(struct notifier_block *self, + unsigned long val, void *data) { struct die_args *args = (struct die_args *)data; int ret = NOTIFY_DONE; @@ -402,11 +404,11 @@ int kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, default: break; } - preempt_enable(); + preempt_enable_no_resched(); return ret; } -int setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) +int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) { struct jprobe *jp = container_of(p, struct jprobe, kp); @@ -419,16 +421,16 @@ int setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) return 1; } -void jprobe_return(void) +void __kprobes jprobe_return(void) { asm volatile("trap" ::: "memory"); } -void jprobe_return_end(void) +void __kprobes jprobe_return_end(void) { }; -int longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) +int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) { /* * FIXME - we should ideally be validating that we got here 'cos diff --git a/arch/ppc64/kernel/misc.S b/arch/ppc64/kernel/misc.S index 474df0a..6d860c1 100644 --- a/arch/ppc64/kernel/misc.S +++ b/arch/ppc64/kernel/misc.S @@ -183,7 +183,7 @@ PPC64_CACHES: * flush all bytes from start through stop-1 inclusive */ -_GLOBAL(__flush_icache_range) +_KPROBE(__flush_icache_range) /* * Flush the data cache to memory @@ -223,7 +223,7 @@ _GLOBAL(__flush_icache_range) bdnz 2b isync blr - + .previous .text /* * Like above, but only do the D-cache. * @@ -957,7 +957,7 @@ _GLOBAL(sys_call_table32) .llong .ppc_fork .llong .sys_read .llong .sys_write - .llong .sys32_open /* 5 */ + .llong .compat_sys_open /* 5 */ .llong .sys_close .llong .sys32_waitpid .llong .sys32_creat diff --git a/arch/ppc64/kernel/pSeries_reconfig.c b/arch/ppc64/kernel/pSeries_reconfig.c index dc2a69d..58c6121 100644 --- a/arch/ppc64/kernel/pSeries_reconfig.c +++ b/arch/ppc64/kernel/pSeries_reconfig.c @@ -111,7 +111,7 @@ static int pSeries_reconfig_add_node(const char *path, struct property *proplist struct device_node *np; int err = -ENOMEM; - np = kcalloc(1, sizeof(*np), GFP_KERNEL); + np = kzalloc(sizeof(*np), GFP_KERNEL); if (!np) goto out_err; diff --git a/arch/ppc64/kernel/sys_ppc32.c b/arch/ppc64/kernel/sys_ppc32.c index 2066190..214914a 100644 --- a/arch/ppc64/kernel/sys_ppc32.c +++ b/arch/ppc64/kernel/sys_ppc32.c @@ -867,37 +867,6 @@ off_t ppc32_lseek(unsigned int fd, u32 offset, unsigned int origin) return sys_lseek(fd, (int)offset, origin); } -/* - * This is just a version for 32-bit applications which does - * not force O_LARGEFILE on. - */ -asmlinkage long sys32_open(const char __user * filename, int flags, int mode) -{ - char * tmp; - int fd, error; - - tmp = getname(filename); - fd = PTR_ERR(tmp); - if (!IS_ERR(tmp)) { - fd = get_unused_fd(); - if (fd >= 0) { - struct file * f = filp_open(tmp, flags, mode); - error = PTR_ERR(f); - if (IS_ERR(f)) - goto out_error; - fd_install(fd, f); - } -out: - putname(tmp); - } - return fd; - -out_error: - put_unused_fd(fd); - fd = error; - goto out; -} - /* Note: it is necessary to treat bufsiz as an unsigned int, * with the corresponding cast to a signed int to insure that the * proper conversion (sign extension) between the register representation of a signed int (msr in 32-bit mode) diff --git a/arch/ppc64/kernel/time.c b/arch/ppc64/kernel/time.c index 91ef95c..9939c20 100644 --- a/arch/ppc64/kernel/time.c +++ b/arch/ppc64/kernel/time.c @@ -128,7 +128,7 @@ static __inline__ void timer_check_rtc(void) * We should have an rtc call that only sets the minutes and * seconds like on Intel to avoid problems with non UTC clocks. */ - if ( (time_status & STA_UNSYNC) == 0 && + if (ntp_synced() && xtime.tv_sec - last_rtc_update >= 659 && abs((xtime.tv_nsec/1000) - (1000000-1000000/HZ)) < 500000/HZ && jiffies - wall_jiffies == 1) { @@ -435,10 +435,7 @@ int do_settimeofday(struct timespec *tv) */ last_rtc_update = new_sec - 658; - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); delta_xsec = mulhdu( (tb_last_stamp-do_gtod.varp->tb_orig_stamp), do_gtod.varp->tb_to_xs ); diff --git a/arch/ppc64/kernel/traps.c b/arch/ppc64/kernel/traps.c index a8d5e83..7467ae5 100644 --- a/arch/ppc64/kernel/traps.c +++ b/arch/ppc64/kernel/traps.c @@ -30,6 +30,7 @@ #include <linux/init.h> #include <linux/module.h> #include <linux/delay.h> +#include <linux/kprobes.h> #include <asm/kdebug.h> #include <asm/pgtable.h> @@ -220,7 +221,7 @@ void instruction_breakpoint_exception(struct pt_regs *regs) _exception(SIGTRAP, regs, TRAP_BRKPT, regs->nip); } -void single_step_exception(struct pt_regs *regs) +void __kprobes single_step_exception(struct pt_regs *regs) { regs->msr &= ~MSR_SE; /* Turn off 'trace' bit */ @@ -398,7 +399,7 @@ check_bug_trap(struct pt_regs *regs) return 0; } -void program_check_exception(struct pt_regs *regs) +void __kprobes program_check_exception(struct pt_regs *regs) { if (debugger_fault_handler(regs)) return; diff --git a/arch/ppc64/kernel/vmlinux.lds.S b/arch/ppc64/kernel/vmlinux.lds.S index 4103cc1..0306510 100644 --- a/arch/ppc64/kernel/vmlinux.lds.S +++ b/arch/ppc64/kernel/vmlinux.lds.S @@ -15,6 +15,7 @@ SECTIONS *(.text .text.*) SCHED_TEXT LOCK_TEXT + KPROBES_TEXT *(.fixup) . = ALIGN(4096); _etext = .; diff --git a/arch/ppc64/mm/fault.c b/arch/ppc64/mm/fault.c index 20b0f37..772f071 100644 --- a/arch/ppc64/mm/fault.c +++ b/arch/ppc64/mm/fault.c @@ -29,6 +29,7 @@ #include <linux/interrupt.h> #include <linux/smp_lock.h> #include <linux/module.h> +#include <linux/kprobes.h> #include <asm/page.h> #include <asm/pgtable.h> @@ -84,8 +85,8 @@ static int store_updates_sp(struct pt_regs *regs) * The return value is 0 if the fault was handled, or the signal * number if this is a kernel fault that can't be handled here. */ -int do_page_fault(struct pt_regs *regs, unsigned long address, - unsigned long error_code) +int __kprobes do_page_fault(struct pt_regs *regs, unsigned long address, + unsigned long error_code) { struct vm_area_struct * vma; struct mm_struct *mm = current->mm; diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index 8ca4856..2fd75da 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -139,10 +139,7 @@ int do_settimeofday(struct timespec *tv) set_normalized_timespec(&xtime, sec, nsec); set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); clock_was_set(); return 0; diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index adc8109..3e804c7 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -37,6 +37,10 @@ config GENERIC_CALIBRATE_DELAY bool default y +config ARCH_MAY_HAVE_PC_FDC + bool + default y + source "init/Kconfig" menu "System type" diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c index df7a9b9..02ca699 100644 --- a/arch/sh/kernel/time.c +++ b/arch/sh/kernel/time.c @@ -215,10 +215,7 @@ int do_settimeofday(struct timespec *tv) set_normalized_timespec(&xtime, sec, nsec); set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); clock_was_set(); @@ -234,7 +231,7 @@ static long last_rtc_update; * timer_interrupt() needs to keep up the real-time clock, * as well as call the "do_timer()" routine every clocktick */ -static inline void do_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) +static inline void do_timer_interrupt(int irq, struct pt_regs *regs) { do_timer(regs); #ifndef CONFIG_SMP @@ -252,7 +249,7 @@ static inline void do_timer_interrupt(int irq, void *dev_id, struct pt_regs *reg * RTC clock accordingly every ~11 minutes. Set_rtc_mmss() has to be * called as close as possible to 500 ms before the new second starts. */ - if ((time_status & STA_UNSYNC) == 0 && + if (ntp_synced() && xtime.tv_sec > last_rtc_update + 660 && (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 && (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) { @@ -285,7 +282,7 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) * locally disabled. -arca */ write_seqlock(&xtime_lock); - do_timer_interrupt(irq, NULL, regs); + do_timer_interrupt(irq, regs); write_sequnlock(&xtime_lock); return IRQ_HANDLED; diff --git a/arch/sh64/kernel/time.c b/arch/sh64/kernel/time.c index 6c84da3..f4a62a1 100644 --- a/arch/sh64/kernel/time.c +++ b/arch/sh64/kernel/time.c @@ -247,10 +247,7 @@ int do_settimeofday(struct timespec *tv) set_normalized_timespec(&xtime, sec, nsec); set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); clock_was_set(); @@ -303,7 +300,7 @@ static long last_rtc_update = 0; * timer_interrupt() needs to keep up the real-time clock, * as well as call the "do_timer()" routine every clocktick */ -static inline void do_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) +static inline void do_timer_interrupt(int irq, struct pt_regs *regs) { unsigned long long current_ctc; asm ("getcon cr62, %0" : "=r" (current_ctc)); @@ -328,7 +325,7 @@ static inline void do_timer_interrupt(int irq, void *dev_id, struct pt_regs *reg * RTC clock accordingly every ~11 minutes. Set_rtc_mmss() has to be * called as close as possible to 500 ms before the new second starts. */ - if ((time_status & STA_UNSYNC) == 0 && + if (ntp_synced() && xtime.tv_sec > last_rtc_update + 660 && (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 && (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) { @@ -361,7 +358,7 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) * locally disabled. -arca */ write_lock(&xtime_lock); - do_timer_interrupt(irq, NULL, regs); + do_timer_interrupt(irq, regs); write_unlock(&xtime_lock); return IRQ_HANDLED; diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index aca028a..aba0539 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -211,6 +211,10 @@ config GENERIC_CALIBRATE_DELAY bool default y +config ARCH_MAY_HAVE_PC_FDC + bool + default y + config SUN_PM bool default y diff --git a/arch/sparc/kernel/pcic.c b/arch/sparc/kernel/pcic.c index 597d3ff..36a4069 100644 --- a/arch/sparc/kernel/pcic.c +++ b/arch/sparc/kernel/pcic.c @@ -840,10 +840,7 @@ static int pci_do_settimeofday(struct timespec *tv) xtime.tv_sec = tv->tv_sec; xtime.tv_nsec = tv->tv_nsec; - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); return 0; } diff --git a/arch/sparc/kernel/time.c b/arch/sparc/kernel/time.c index 3b759ae..bc015e9 100644 --- a/arch/sparc/kernel/time.c +++ b/arch/sparc/kernel/time.c @@ -139,7 +139,7 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs * regs) /* Determine when to update the Mostek clock. */ - if ((time_status & STA_UNSYNC) == 0 && + if (ntp_synced() && xtime.tv_sec > last_rtc_update + 660 && (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 && (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) { @@ -554,10 +554,7 @@ static int sbus_do_settimeofday(struct timespec *tv) set_normalized_timespec(&xtime, sec, nsec); set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); return 0; } diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig index 73ec6ae..1e9d863 100644 --- a/arch/sparc64/Kconfig +++ b/arch/sparc64/Kconfig @@ -26,6 +26,10 @@ config TIME_INTERPOLATION bool default y +config ARCH_MAY_HAVE_PC_FDC + bool + default y + choice prompt "Kernel page size" default SPARC64_PAGE_SIZE_8KB diff --git a/arch/sparc64/kernel/kprobes.c b/arch/sparc64/kernel/kprobes.c index bbf11f8..0d66d07 100644 --- a/arch/sparc64/kernel/kprobes.c +++ b/arch/sparc64/kernel/kprobes.c @@ -8,6 +8,7 @@ #include <linux/kprobes.h> #include <asm/kdebug.h> #include <asm/signal.h> +#include <asm/cacheflush.h> /* We do not have hardware single-stepping on sparc64. * So we implement software single-stepping with breakpoint @@ -37,31 +38,31 @@ * - Mark that we are no longer actively in a kprobe. */ -int arch_prepare_kprobe(struct kprobe *p) +int __kprobes arch_prepare_kprobe(struct kprobe *p) { return 0; } -void arch_copy_kprobe(struct kprobe *p) +void __kprobes arch_copy_kprobe(struct kprobe *p) { p->ainsn.insn[0] = *p->addr; p->ainsn.insn[1] = BREAKPOINT_INSTRUCTION_2; p->opcode = *p->addr; } -void arch_arm_kprobe(struct kprobe *p) +void __kprobes arch_arm_kprobe(struct kprobe *p) { *p->addr = BREAKPOINT_INSTRUCTION; flushi(p->addr); } -void arch_disarm_kprobe(struct kprobe *p) +void __kprobes arch_disarm_kprobe(struct kprobe *p) { *p->addr = p->opcode; flushi(p->addr); } -void arch_remove_kprobe(struct kprobe *p) +void __kprobes arch_remove_kprobe(struct kprobe *p) { } @@ -111,7 +112,7 @@ static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs) } } -static int kprobe_handler(struct pt_regs *regs) +static int __kprobes kprobe_handler(struct pt_regs *regs) { struct kprobe *p; void *addr = (void *) regs->tpc; @@ -191,8 +192,9 @@ no_kprobe: * The original INSN location was REAL_PC, it actually * executed at PC and produced destination address NPC. */ -static unsigned long relbranch_fixup(u32 insn, unsigned long real_pc, - unsigned long pc, unsigned long npc) +static unsigned long __kprobes relbranch_fixup(u32 insn, unsigned long real_pc, + unsigned long pc, + unsigned long npc) { /* Branch not taken, no mods necessary. */ if (npc == pc + 0x4UL) @@ -217,7 +219,8 @@ static unsigned long relbranch_fixup(u32 insn, unsigned long real_pc, /* If INSN is an instruction which writes it's PC location * into a destination register, fix that up. */ -static void retpc_fixup(struct pt_regs *regs, u32 insn, unsigned long real_pc) +static void __kprobes retpc_fixup(struct pt_regs *regs, u32 insn, + unsigned long real_pc) { unsigned long *slot = NULL; @@ -257,7 +260,7 @@ static void retpc_fixup(struct pt_regs *regs, u32 insn, unsigned long real_pc) * This function prepares to return from the post-single-step * breakpoint trap. */ -static void resume_execution(struct kprobe *p, struct pt_regs *regs) +static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) { u32 insn = p->ainsn.insn[0]; @@ -315,8 +318,8 @@ static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr) /* * Wrapper routine to for handling exceptions. */ -int kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, - void *data) +int __kprobes kprobe_exceptions_notify(struct notifier_block *self, + unsigned long val, void *data) { struct die_args *args = (struct die_args *)data; switch (val) { @@ -344,7 +347,8 @@ int kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, return NOTIFY_DONE; } -asmlinkage void kprobe_trap(unsigned long trap_level, struct pt_regs *regs) +asmlinkage void __kprobes kprobe_trap(unsigned long trap_level, + struct pt_regs *regs) { BUG_ON(trap_level != 0x170 && trap_level != 0x171); @@ -368,7 +372,7 @@ static struct pt_regs jprobe_saved_regs; static struct pt_regs *jprobe_saved_regs_location; static struct sparc_stackf jprobe_saved_stack; -int setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) +int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) { struct jprobe *jp = container_of(p, struct jprobe, kp); @@ -390,7 +394,7 @@ int setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) return 1; } -void jprobe_return(void) +void __kprobes jprobe_return(void) { preempt_enable_no_resched(); __asm__ __volatile__( @@ -403,7 +407,7 @@ extern void jprobe_return_trap_instruction(void); extern void __show_regs(struct pt_regs * regs); -int longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) +int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) { u32 *addr = (u32 *) regs->tpc; diff --git a/arch/sparc64/kernel/sunos_ioctl32.c b/arch/sparc64/kernel/sunos_ioctl32.c index 87c1aeb..7654b8a 100644 --- a/arch/sparc64/kernel/sunos_ioctl32.c +++ b/arch/sparc64/kernel/sunos_ioctl32.c @@ -152,11 +152,12 @@ asmlinkage int sunos_ioctl (int fd, u32 cmd, u32 arg) ret = compat_sys_ioctl(fd, SIOCGIFCONF, arg); goto out; - case _IOW('i', 21, struct ifreq): /* SIOCSIFMTU */ - ret = sys_ioctl(fd, SIOCSIFMTU, arg); + case _IOW('i', 21, struct ifreq32): + ret = compat_sys_ioctl(fd, SIOCSIFMTU, arg); goto out; - case _IOWR('i', 22, struct ifreq): /* SIOCGIFMTU */ - ret = sys_ioctl(fd, SIOCGIFMTU, arg); + + case _IOWR('i', 22, struct ifreq32): + ret = compat_sys_ioctl(fd, SIOCGIFMTU, arg); goto out; case _IOWR('i', 23, struct ifreq32): diff --git a/arch/sparc64/kernel/sys_sparc32.c b/arch/sparc64/kernel/sys_sparc32.c index 1d3aa58..7f6239e 100644 --- a/arch/sparc64/kernel/sys_sparc32.c +++ b/arch/sparc64/kernel/sys_sparc32.c @@ -1002,29 +1002,7 @@ asmlinkage long sys32_adjtimex(struct timex32 __user *utp) asmlinkage long sparc32_open(const char __user *filename, int flags, int mode) { - char * tmp; - int fd, error; - - tmp = getname(filename); - fd = PTR_ERR(tmp); - if (!IS_ERR(tmp)) { - fd = get_unused_fd(); - if (fd >= 0) { - struct file * f = filp_open(tmp, flags, mode); - error = PTR_ERR(f); - if (IS_ERR(f)) - goto out_error; - fd_install(fd, f); - } -out: - putname(tmp); - } - return fd; - -out_error: - put_unused_fd(fd); - fd = error; - goto out; + return do_sys_open(filename, flags, mode); } extern unsigned long do_mremap(unsigned long addr, diff --git a/arch/sparc64/kernel/time.c b/arch/sparc64/kernel/time.c index 362b9c2..3f08a32 100644 --- a/arch/sparc64/kernel/time.c +++ b/arch/sparc64/kernel/time.c @@ -449,7 +449,7 @@ static inline void timer_check_rtc(void) static long last_rtc_update; /* Determine when to update the Mostek clock. */ - if ((time_status & STA_UNSYNC) == 0 && + if (ntp_synced() && xtime.tv_sec > last_rtc_update + 660 && (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 && (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) { diff --git a/arch/sparc64/kernel/vmlinux.lds.S b/arch/sparc64/kernel/vmlinux.lds.S index 950423d..f47d0be 100644 --- a/arch/sparc64/kernel/vmlinux.lds.S +++ b/arch/sparc64/kernel/vmlinux.lds.S @@ -17,6 +17,7 @@ SECTIONS *(.text) SCHED_TEXT LOCK_TEXT + KPROBES_TEXT *(.gnu.warning) } =0 _etext = .; diff --git a/arch/sparc64/mm/fault.c b/arch/sparc64/mm/fault.c index 52e9375..db1e331 100644 --- a/arch/sparc64/mm/fault.c +++ b/arch/sparc64/mm/fault.c @@ -18,6 +18,7 @@ #include <linux/smp_lock.h> #include <linux/init.h> #include <linux/interrupt.h> +#include <linux/kprobes.h> #include <asm/page.h> #include <asm/pgtable.h> @@ -117,8 +118,9 @@ unsigned long __init prom_probe_memory (void) return tally; } -static void unhandled_fault(unsigned long address, struct task_struct *tsk, - struct pt_regs *regs) +static void __kprobes unhandled_fault(unsigned long address, + struct task_struct *tsk, + struct pt_regs *regs) { if ((unsigned long) address < PAGE_SIZE) { printk(KERN_ALERT "Unable to handle kernel NULL " @@ -304,7 +306,7 @@ cannot_handle: unhandled_fault (address, current, regs); } -asmlinkage void do_sparc64_fault(struct pt_regs *regs) +asmlinkage void __kprobes do_sparc64_fault(struct pt_regs *regs) { struct mm_struct *mm = current->mm; struct vm_area_struct *vma; diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index 3fbaf34..fdb1ebb 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -19,6 +19,7 @@ #include <linux/pagemap.h> #include <linux/fs.h> #include <linux/seq_file.h> +#include <linux/kprobes.h> #include <asm/head.h> #include <asm/system.h> @@ -250,7 +251,7 @@ out: put_cpu(); } -void flush_icache_range(unsigned long start, unsigned long end) +void __kprobes flush_icache_range(unsigned long start, unsigned long end) { /* Cheetah has coherent I-cache. */ if (tlb_type == spitfire) { diff --git a/arch/sparc64/mm/ultra.S b/arch/sparc64/mm/ultra.S index 8dfa825..b2ee9b5 100644 --- a/arch/sparc64/mm/ultra.S +++ b/arch/sparc64/mm/ultra.S @@ -119,6 +119,7 @@ __spitfire_flush_tlb_mm_slow: #else #error unsupported PAGE_SIZE #endif + .section .kprobes.text, "ax" .align 32 .globl __flush_icache_page __flush_icache_page: /* %o0 = phys_page */ @@ -201,6 +202,7 @@ dflush4:stxa %g0, [%o4] ASI_DCACHE_TAG nop #endif /* DCACHE_ALIASING_POSSIBLE */ + .previous .text .align 32 __prefill_dtlb: rdpr %pstate, %g7 diff --git a/arch/um/Makefile-i386 b/arch/um/Makefile-i386 index a777e57..1ab431a 100644 --- a/arch/um/Makefile-i386 +++ b/arch/um/Makefile-i386 @@ -27,7 +27,7 @@ export LDFLAGS HOSTCFLAGS HOSTLDFLAGS UML_OBJCOPYFLAGS endif endif -CFLAGS += -U__$(SUBARCH)__ -U$(SUBARCH) $(STUB_CFLAGS) +CFLAGS += -U__$(SUBARCH)__ -U$(SUBARCH) ifneq ($(CONFIG_GPROF),y) ARCH_CFLAGS += -DUM_FASTCALL diff --git a/arch/um/include/common-offsets.h b/arch/um/include/common-offsets.h index d705daa..0aa6209 100644 --- a/arch/um/include/common-offsets.h +++ b/arch/um/include/common-offsets.h @@ -12,3 +12,4 @@ DEFINE_STR(UM_KERN_WARNING, KERN_WARNING); DEFINE_STR(UM_KERN_NOTICE, KERN_NOTICE); DEFINE_STR(UM_KERN_INFO, KERN_INFO); DEFINE_STR(UM_KERN_DEBUG, KERN_DEBUG); +DEFINE(HOST_ELF_CLASS, ELF_CLASS); diff --git a/arch/um/include/um_uaccess.h b/arch/um/include/um_uaccess.h index 6e348cb..84c0868 100644 --- a/arch/um/include/um_uaccess.h +++ b/arch/um/include/um_uaccess.h @@ -20,13 +20,6 @@ #define access_ok(type, addr, size) \ CHOOSE_MODE_PROC(access_ok_tt, access_ok_skas, type, addr, size) -/* this function will go away soon - use access_ok() instead */ -static inline int __deprecated verify_area(int type, const void __user *addr, unsigned long size) -{ - return (CHOOSE_MODE_PROC(verify_area_tt, verify_area_skas, type, addr, - size)); -} - static inline int copy_from_user(void *to, const void __user *from, int n) { return(CHOOSE_MODE_PROC(copy_from_user_tt, copy_from_user_skas, to, diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c index 5597bd3..64fa062 100644 --- a/arch/um/kernel/mem.c +++ b/arch/um/kernel/mem.c @@ -196,7 +196,7 @@ static void init_highmem(void) static void __init fixaddr_user_init( void) { -#if CONFIG_ARCH_REUSE_HOST_VSYSCALL_AREA +#ifdef CONFIG_ARCH_REUSE_HOST_VSYSCALL_AREA long size = FIXADDR_USER_END - FIXADDR_USER_START; pgd_t *pgd; pud_t *pud; diff --git a/arch/um/os-Linux/Makefile b/arch/um/os-Linux/Makefile index d3c1560..7a16624 100644 --- a/arch/um/os-Linux/Makefile +++ b/arch/um/os-Linux/Makefile @@ -9,6 +9,9 @@ obj-y = aio.o elf_aux.o file.o process.o signal.o start_up.o time.o tt.o \ USER_OBJS := aio.o elf_aux.o file.o process.o signal.o start_up.o time.o tt.o \ tty.o +elf_aux.o: $(ARCH_DIR)/kernel-offsets.h +CFLAGS_elf_aux.o += -I$(objtree)/arch/um + CFLAGS_user_syms.o += -DSUBARCH_$(SUBARCH) HAVE_AIO_ABI := $(shell [ -r /usr/include/linux/aio_abi.h ] && \ diff --git a/arch/um/os-Linux/elf_aux.c b/arch/um/os-Linux/elf_aux.c index 4cca3e9..1399520 100644 --- a/arch/um/os-Linux/elf_aux.c +++ b/arch/um/os-Linux/elf_aux.c @@ -12,8 +12,9 @@ #include "init.h" #include "elf_user.h" #include "mem_user.h" +#include <kernel-offsets.h> -#if ELF_CLASS == ELFCLASS32 +#if HOST_ELF_CLASS == ELFCLASS32 typedef Elf32_auxv_t elf_auxv_t; #else typedef Elf64_auxv_t elf_auxv_t; diff --git a/arch/um/sys-i386/kernel-offsets.c b/arch/um/sys-i386/kernel-offsets.c index 9f8ecd1..a1070af 100644 --- a/arch/um/sys-i386/kernel-offsets.c +++ b/arch/um/sys-i386/kernel-offsets.c @@ -2,6 +2,7 @@ #include <linux/stddef.h> #include <linux/sched.h> #include <linux/time.h> +#include <linux/elf.h> #include <asm/page.h> #define DEFINE(sym, val) \ diff --git a/arch/um/sys-x86_64/kernel-offsets.c b/arch/um/sys-x86_64/kernel-offsets.c index 220e875..998541e 100644 --- a/arch/um/sys-x86_64/kernel-offsets.c +++ b/arch/um/sys-x86_64/kernel-offsets.c @@ -2,6 +2,7 @@ #include <linux/stddef.h> #include <linux/sched.h> #include <linux/time.h> +#include <linux/elf.h> #include <asm/page.h> #define DEFINE(sym, val) \ diff --git a/arch/v850/kernel/time.c b/arch/v850/kernel/time.c index f722a26..ea3fd88 100644 --- a/arch/v850/kernel/time.c +++ b/arch/v850/kernel/time.c @@ -66,7 +66,7 @@ static irqreturn_t timer_interrupt (int irq, void *dummy, struct pt_regs *regs) * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be * called as close as possible to 500 ms before the new second starts. */ - if ((time_status & STA_UNSYNC) == 0 && + if (ntp_synced() && xtime.tv_sec > last_rtc_update + 660 && (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 && (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) { @@ -169,10 +169,7 @@ int do_settimeofday(struct timespec *tv) xtime.tv_sec = tv->tv_sec; xtime.tv_nsec = tv->tv_nsec; - time_adjust = 0; /* stop active adjtime () */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq (&xtime_lock); clock_was_set(); diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig index 75e52c5..e63323e 100644 --- a/arch/x86_64/Kconfig +++ b/arch/x86_64/Kconfig @@ -65,6 +65,10 @@ config GENERIC_IOMAP bool default y +config ARCH_MAY_HAVE_PC_FDC + bool + default y + source "init/Kconfig" @@ -148,7 +152,6 @@ config X86_CPUID with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to /dev/cpu/31/cpuid. -# disable it for opteron optimized builds because it pulls in ACPI_BOOT config X86_HT bool depends on SMP && !MK8 @@ -441,6 +444,11 @@ config ISA_DMA_API bool default y +config GENERIC_PENDING_IRQ + bool + depends on GENERIC_HARDIRQS && SMP + default y + menu "Power management options" source kernel/power/Kconfig @@ -465,7 +473,6 @@ config PCI_DIRECT config PCI_MMCONFIG bool "Support mmconfig PCI config space access" depends on PCI && ACPI - select ACPI_BOOT config UNORDERED_IO bool "Unordered IO mapping access" diff --git a/arch/x86_64/boot/setup.S b/arch/x86_64/boot/setup.S index ff58b28..12ea0b6 100644 --- a/arch/x86_64/boot/setup.S +++ b/arch/x86_64/boot/setup.S @@ -81,7 +81,7 @@ start: # This is the setup header, and it must start at %cs:2 (old 0x9020:2) .ascii "HdrS" # header signature - .word 0x0203 # header version number (>= 0x0105) + .word 0x0204 # header version number (>= 0x0105) # or else old loadlin-1.5 will fail) realmode_swtch: .word 0, 0 # default_switch, SETUPSEG start_sys_seg: .word SYSSEG diff --git a/arch/x86_64/boot/tools/build.c b/arch/x86_64/boot/tools/build.c index 18b5bac..c44f5e2 100644 --- a/arch/x86_64/boot/tools/build.c +++ b/arch/x86_64/boot/tools/build.c @@ -178,7 +178,9 @@ int main(int argc, char ** argv) die("Output: seek failed"); buf[0] = (sys_size & 0xff); buf[1] = ((sys_size >> 8) & 0xff); - if (write(1, buf, 2) != 2) + buf[2] = ((sys_size >> 16) & 0xff); + buf[3] = ((sys_size >> 24) & 0xff); + if (write(1, buf, 4) != 4) die("Write of image length failed"); return 0; /* Everything is OK */ diff --git a/arch/x86_64/defconfig b/arch/x86_64/defconfig index b97a61e..bf57e23 100644 --- a/arch/x86_64/defconfig +++ b/arch/x86_64/defconfig @@ -135,8 +135,6 @@ CONFIG_PM_STD_PARTITION="" # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI=y -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y @@ -151,10 +149,8 @@ CONFIG_ACPI_NUMA=y CONFIG_ACPI_TOSHIBA=y CONFIG_ACPI_BLACKLIST_YEAR=2001 # CONFIG_ACPI_DEBUG is not set -CONFIG_ACPI_BUS=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y # CONFIG_ACPI_CONTAINER is not set diff --git a/arch/x86_64/ia32/ia32entry.S b/arch/x86_64/ia32/ia32entry.S index c45d6a0..f174083 100644 --- a/arch/x86_64/ia32/ia32entry.S +++ b/arch/x86_64/ia32/ia32entry.S @@ -307,7 +307,7 @@ ia32_sys_call_table: .quad stub32_fork .quad sys_read .quad sys_write - .quad sys32_open /* 5 */ + .quad compat_sys_open /* 5 */ .quad sys_close .quad sys32_waitpid .quad sys_creat diff --git a/arch/x86_64/ia32/sys_ia32.c b/arch/x86_64/ia32/sys_ia32.c index be996d1..04d8040 100644 --- a/arch/x86_64/ia32/sys_ia32.c +++ b/arch/x86_64/ia32/sys_ia32.c @@ -969,32 +969,6 @@ long sys32_kill(int pid, int sig) return sys_kill(pid, sig); } -asmlinkage long sys32_open(const char __user * filename, int flags, int mode) -{ - char * tmp; - int fd, error; - - /* don't force O_LARGEFILE */ - tmp = getname(filename); - fd = PTR_ERR(tmp); - if (!IS_ERR(tmp)) { - fd = get_unused_fd(); - if (fd >= 0) { - struct file *f = filp_open(tmp, flags, mode); - error = PTR_ERR(f); - if (IS_ERR(f)) { - put_unused_fd(fd); - fd = error; - } else { - fsnotify_open(f->f_dentry); - fd_install(fd, f); - } - } - putname(tmp); - } - return fd; -} - extern asmlinkage long sys_timer_create(clockid_t which_clock, struct sigevent __user *timer_event_spec, diff --git a/arch/x86_64/kernel/Makefile b/arch/x86_64/kernel/Makefile index c32e198..1579bdd 100644 --- a/arch/x86_64/kernel/Makefile +++ b/arch/x86_64/kernel/Makefile @@ -12,7 +12,7 @@ obj-y := process.o signal.o entry.o traps.o irq.o \ obj-$(CONFIG_X86_MCE) += mce.o obj-$(CONFIG_X86_MCE_INTEL) += mce_intel.o obj-$(CONFIG_MTRR) += ../../i386/kernel/cpu/mtrr/ -obj-$(CONFIG_ACPI_BOOT) += acpi/ +obj-$(CONFIG_ACPI) += acpi/ obj-$(CONFIG_X86_MSR) += msr.o obj-$(CONFIG_MICROCODE) += microcode.o obj-$(CONFIG_X86_CPUID) += cpuid.o diff --git a/arch/x86_64/kernel/acpi/Makefile b/arch/x86_64/kernel/acpi/Makefile index d2c2ee5..7da9ace 100644 --- a/arch/x86_64/kernel/acpi/Makefile +++ b/arch/x86_64/kernel/acpi/Makefile @@ -1,3 +1,3 @@ -obj-$(CONFIG_ACPI_BOOT) := boot.o -boot-$(CONFIG_ACPI_BOOT) := ../../../i386/kernel/acpi/boot.o +obj-y := boot.o +boot-y := ../../../i386/kernel/acpi/boot.o obj-$(CONFIG_ACPI_SLEEP) += sleep.o wakeup.o diff --git a/arch/x86_64/kernel/acpi/sleep.c b/arch/x86_64/kernel/acpi/sleep.c index 7a275de..148f6f7 100644 --- a/arch/x86_64/kernel/acpi/sleep.c +++ b/arch/x86_64/kernel/acpi/sleep.c @@ -47,7 +47,6 @@ #include <asm/proto.h> #include <asm/tlbflush.h> - /* -------------------------------------------------------------------------- Low-Level Sleep Support -------------------------------------------------------------------------- */ @@ -77,11 +76,12 @@ static void init_low_mapping(void) * Create an identity mapped page table and copy the wakeup routine to * low memory. */ -int acpi_save_state_mem (void) +int acpi_save_state_mem(void) { init_low_mapping(); - memcpy((void *) acpi_wakeup_address, &wakeup_start, &wakeup_end - &wakeup_start); + memcpy((void *)acpi_wakeup_address, &wakeup_start, + &wakeup_end - &wakeup_start); acpi_copy_wakeup_routine(acpi_wakeup_address); return 0; @@ -90,7 +90,7 @@ int acpi_save_state_mem (void) /* * acpi_restore_state */ -void acpi_restore_state_mem (void) +void acpi_restore_state_mem(void) { set_pgd(pgd_offset(current->mm, 0UL), low_ptr); flush_tlb_all(); @@ -108,7 +108,8 @@ void __init acpi_reserve_bootmem(void) { acpi_wakeup_address = (unsigned long)alloc_bootmem_low(PAGE_SIZE); if ((&wakeup_end - &wakeup_start) > PAGE_SIZE) - printk(KERN_CRIT "ACPI: Wakeup code way too big, will crash on attempt to suspend\n"); + printk(KERN_CRIT + "ACPI: Wakeup code way too big, will crash on attempt to suspend\n"); } static int __init acpi_sleep_setup(char *str) @@ -127,6 +128,8 @@ static int __init acpi_sleep_setup(char *str) __setup("acpi_sleep=", acpi_sleep_setup); -#endif /*CONFIG_ACPI_SLEEP*/ +#endif /*CONFIG_ACPI_SLEEP */ -void acpi_pci_link_exit(void) {} +void acpi_pci_link_exit(void) +{ +} diff --git a/arch/x86_64/kernel/e820.c b/arch/x86_64/kernel/e820.c index b548dea..116ac5f 100644 --- a/arch/x86_64/kernel/e820.c +++ b/arch/x86_64/kernel/e820.c @@ -85,7 +85,7 @@ int __init e820_mapped(unsigned long start, unsigned long end, unsigned type) struct e820entry *ei = &e820.map[i]; if (type && ei->type != type) continue; - if (ei->addr >= end || ei->addr + ei->size < start) + if (ei->addr >= end || ei->addr + ei->size <= start) continue; return 1; } diff --git a/arch/x86_64/kernel/entry.S b/arch/x86_64/kernel/entry.S index 096d470..be51dbe 100644 --- a/arch/x86_64/kernel/entry.S +++ b/arch/x86_64/kernel/entry.S @@ -784,8 +784,9 @@ ENTRY(execve) ret CFI_ENDPROC -ENTRY(page_fault) +KPROBE_ENTRY(page_fault) errorentry do_page_fault + .previous .text ENTRY(coprocessor_error) zeroentry do_coprocessor_error @@ -797,13 +798,14 @@ ENTRY(device_not_available) zeroentry math_state_restore /* runs on exception stack */ -ENTRY(debug) +KPROBE_ENTRY(debug) CFI_STARTPROC pushq $0 CFI_ADJUST_CFA_OFFSET 8 paranoidentry do_debug jmp paranoid_exit CFI_ENDPROC + .previous .text /* runs on exception stack */ ENTRY(nmi) @@ -854,8 +856,9 @@ paranoid_schedule: jmp paranoid_userspace CFI_ENDPROC -ENTRY(int3) +KPROBE_ENTRY(int3) zeroentry do_int3 + .previous .text ENTRY(overflow) zeroentry do_overflow @@ -892,8 +895,9 @@ ENTRY(stack_segment) jmp paranoid_exit CFI_ENDPROC -ENTRY(general_protection) +KPROBE_ENTRY(general_protection) errorentry do_general_protection + .previous .text ENTRY(alignment_check) errorentry do_alignment_check diff --git a/arch/x86_64/kernel/genapic.c b/arch/x86_64/kernel/genapic.c index 30c843a..b1c144f 100644 --- a/arch/x86_64/kernel/genapic.c +++ b/arch/x86_64/kernel/genapic.c @@ -20,12 +20,12 @@ #include <asm/smp.h> #include <asm/ipi.h> -#if defined(CONFIG_ACPI_BUS) +#if defined(CONFIG_ACPI) #include <acpi/acpi_bus.h> #endif /* which logical CPU number maps to which CPU (physical APIC ID) */ -u8 x86_cpu_to_apicid[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID }; +u8 x86_cpu_to_apicid[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = BAD_APICID }; EXPORT_SYMBOL(x86_cpu_to_apicid); u8 x86_cpu_to_log_apicid[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID }; @@ -47,7 +47,7 @@ void __init clustered_apic_check(void) u8 cluster_cnt[NUM_APIC_CLUSTERS]; int num_cpus = 0; -#if defined(CONFIG_ACPI_BUS) +#if defined(CONFIG_ACPI) /* * Some x86_64 machines use physical APIC mode regardless of how many * procs/clusters are present (x86_64 ES7000 is an example). diff --git a/arch/x86_64/kernel/genapic_cluster.c b/arch/x86_64/kernel/genapic_cluster.c index 9703da7..f6523dd 100644 --- a/arch/x86_64/kernel/genapic_cluster.c +++ b/arch/x86_64/kernel/genapic_cluster.c @@ -72,10 +72,14 @@ static void cluster_send_IPI_mask(cpumask_t mask, int vector) static void cluster_send_IPI_allbutself(int vector) { cpumask_t mask = cpu_online_map; - cpu_clear(smp_processor_id(), mask); + int me = get_cpu(); /* Ensure we are not preempted when we clear */ + + cpu_clear(me, mask); if (!cpus_empty(mask)) cluster_send_IPI_mask(mask, vector); + + put_cpu(); } static void cluster_send_IPI_all(int vector) diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c index d206d7e..40e0aca 100644 --- a/arch/x86_64/kernel/io_apic.c +++ b/arch/x86_64/kernel/io_apic.c @@ -70,7 +70,7 @@ static struct irq_pin_list { short apic, pin, next; } irq_2_pin[PIN_MAP_SIZE]; -int vector_irq[NR_VECTORS] = { [0 ... NR_VECTORS - 1] = -1}; +int vector_irq[NR_VECTORS] __read_mostly = { [0 ... NR_VECTORS - 1] = -1}; #ifdef CONFIG_PCI_MSI #define vector_to_irq(vector) \ (platform_legacy_irq(vector) ? vector : vector_irq[vector]) @@ -78,6 +78,54 @@ int vector_irq[NR_VECTORS] = { [0 ... NR_VECTORS - 1] = -1}; #define vector_to_irq(vector) (vector) #endif +#define __DO_ACTION(R, ACTION, FINAL) \ + \ +{ \ + int pin; \ + struct irq_pin_list *entry = irq_2_pin + irq; \ + \ + for (;;) { \ + unsigned int reg; \ + pin = entry->pin; \ + if (pin == -1) \ + break; \ + reg = io_apic_read(entry->apic, 0x10 + R + pin*2); \ + reg ACTION; \ + io_apic_modify(entry->apic, reg); \ + if (!entry->next) \ + break; \ + entry = irq_2_pin + entry->next; \ + } \ + FINAL; \ +} + +#ifdef CONFIG_SMP +static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t mask) +{ + unsigned long flags; + unsigned int dest; + cpumask_t tmp; + + cpus_and(tmp, mask, cpu_online_map); + if (cpus_empty(tmp)) + tmp = TARGET_CPUS; + + cpus_and(mask, tmp, CPU_MASK_ALL); + + dest = cpu_mask_to_apicid(mask); + + /* + * Only the high 8 bits are valid. + */ + dest = SET_APIC_LOGICAL_ID(dest); + + spin_lock_irqsave(&ioapic_lock, flags); + __DO_ACTION(1, = dest, ) + set_irq_info(irq, mask); + spin_unlock_irqrestore(&ioapic_lock, flags); +} +#endif + /* * The common case is 1:1 IRQ<->pin mappings. Sometimes there are * shared ISA-space IRQs, so we have to support them. We are super @@ -101,26 +149,6 @@ static void add_pin_to_irq(unsigned int irq, int apic, int pin) entry->pin = pin; } -#define __DO_ACTION(R, ACTION, FINAL) \ - \ -{ \ - int pin; \ - struct irq_pin_list *entry = irq_2_pin + irq; \ - \ - for (;;) { \ - unsigned int reg; \ - pin = entry->pin; \ - if (pin == -1) \ - break; \ - reg = io_apic_read(entry->apic, 0x10 + R + pin*2); \ - reg ACTION; \ - io_apic_modify(entry->apic, reg); \ - if (!entry->next) \ - break; \ - entry = irq_2_pin + entry->next; \ - } \ - FINAL; \ -} #define DO_ACTION(name,R,ACTION, FINAL) \ \ @@ -655,7 +683,7 @@ static inline int IO_APIC_irq_trigger(int irq) } /* irq_vectors is indexed by the sum of all RTEs in all I/O APICs. */ -u8 irq_vector[NR_IRQ_VECTORS] = { FIRST_DEVICE_VECTOR , 0 }; +u8 irq_vector[NR_IRQ_VECTORS] __read_mostly = { FIRST_DEVICE_VECTOR , 0 }; int assign_irq_vector(int irq) { @@ -767,6 +795,7 @@ static void __init setup_IO_APIC_irqs(void) spin_lock_irqsave(&ioapic_lock, flags); io_apic_write(apic, 0x11+2*pin, *(((int *)&entry)+1)); io_apic_write(apic, 0x10+2*pin, *(((int *)&entry)+0)); + set_native_irq_info(irq, TARGET_CPUS); spin_unlock_irqrestore(&ioapic_lock, flags); } } @@ -1314,6 +1343,7 @@ static unsigned int startup_edge_ioapic_irq(unsigned int irq) */ static void ack_edge_ioapic_irq(unsigned int irq) { + move_irq(irq); if ((irq_desc[irq].status & (IRQ_PENDING | IRQ_DISABLED)) == (IRQ_PENDING | IRQ_DISABLED)) mask_IO_APIC_irq(irq); @@ -1343,26 +1373,10 @@ static unsigned int startup_level_ioapic_irq (unsigned int irq) static void end_level_ioapic_irq (unsigned int irq) { + move_irq(irq); ack_APIC_irq(); } -static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t mask) -{ - unsigned long flags; - unsigned int dest; - - dest = cpu_mask_to_apicid(mask); - - /* - * Only the high 8 bits are valid. - */ - dest = SET_APIC_LOGICAL_ID(dest); - - spin_lock_irqsave(&ioapic_lock, flags); - __DO_ACTION(1, = dest, ) - spin_unlock_irqrestore(&ioapic_lock, flags); -} - #ifdef CONFIG_PCI_MSI static unsigned int startup_edge_ioapic_vector(unsigned int vector) { @@ -1375,6 +1389,7 @@ static void ack_edge_ioapic_vector(unsigned int vector) { int irq = vector_to_irq(vector); + move_native_irq(vector); ack_edge_ioapic_irq(irq); } @@ -1389,6 +1404,7 @@ static void end_level_ioapic_vector (unsigned int vector) { int irq = vector_to_irq(vector); + move_native_irq(vector); end_level_ioapic_irq(irq); } @@ -1406,14 +1422,17 @@ static void unmask_IO_APIC_vector (unsigned int vector) unmask_IO_APIC_irq(irq); } +#ifdef CONFIG_SMP static void set_ioapic_affinity_vector (unsigned int vector, cpumask_t cpu_mask) { int irq = vector_to_irq(vector); + set_native_irq_info(vector, cpu_mask); set_ioapic_affinity_irq(irq, cpu_mask); } -#endif +#endif // CONFIG_SMP +#endif // CONFIG_PCI_MSI /* * Level and edge triggered IO-APIC interrupts need different handling, @@ -1424,7 +1443,7 @@ static void set_ioapic_affinity_vector (unsigned int vector, * races. */ -static struct hw_interrupt_type ioapic_edge_type = { +static struct hw_interrupt_type ioapic_edge_type __read_mostly = { .typename = "IO-APIC-edge", .startup = startup_edge_ioapic, .shutdown = shutdown_edge_ioapic, @@ -1432,10 +1451,12 @@ static struct hw_interrupt_type ioapic_edge_type = { .disable = disable_edge_ioapic, .ack = ack_edge_ioapic, .end = end_edge_ioapic, +#ifdef CONFIG_SMP .set_affinity = set_ioapic_affinity, +#endif }; -static struct hw_interrupt_type ioapic_level_type = { +static struct hw_interrupt_type ioapic_level_type __read_mostly = { .typename = "IO-APIC-level", .startup = startup_level_ioapic, .shutdown = shutdown_level_ioapic, @@ -1443,7 +1464,9 @@ static struct hw_interrupt_type ioapic_level_type = { .disable = disable_level_ioapic, .ack = mask_and_ack_level_ioapic, .end = end_level_ioapic, +#ifdef CONFIG_SMP .set_affinity = set_ioapic_affinity, +#endif }; static inline void init_IO_APIC_traps(void) @@ -1506,7 +1529,7 @@ static void ack_lapic_irq (unsigned int irq) static void end_lapic_irq (unsigned int i) { /* nothing */ } -static struct hw_interrupt_type lapic_irq_type = { +static struct hw_interrupt_type lapic_irq_type __read_mostly = { .typename = "local-APIC-edge", .startup = NULL, /* startup_irq() not used for IRQ0 */ .shutdown = NULL, /* shutdown_irq() not used for IRQ0 */ @@ -1841,7 +1864,7 @@ device_initcall(ioapic_init_sysfs); ACPI-based IOAPIC Configuration -------------------------------------------------------------------------- */ -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI #define IO_APIC_MAX_ID 0xFE @@ -1918,12 +1941,13 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int a spin_lock_irqsave(&ioapic_lock, flags); io_apic_write(ioapic, 0x11+2*pin, *(((int *)&entry)+1)); io_apic_write(ioapic, 0x10+2*pin, *(((int *)&entry)+0)); + set_native_irq_info(use_pci_vector() ? entry.vector : irq, TARGET_CPUS); spin_unlock_irqrestore(&ioapic_lock, flags); return 0; } -#endif /*CONFIG_ACPI_BOOT*/ +#endif /* CONFIG_ACPI */ /* @@ -1931,6 +1955,7 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int a * we need to reprogram the ioredtbls to cater for the cpus which have come online * so mask in all cases should simply be TARGET_CPUS */ +#ifdef CONFIG_SMP void __init setup_ioapic_dest(void) { int pin, ioapic, irq, irq_entry; @@ -1949,3 +1974,4 @@ void __init setup_ioapic_dest(void) } } +#endif diff --git a/arch/x86_64/kernel/kprobes.c b/arch/x86_64/kernel/kprobes.c index 5c6dc70..df08c43 100644 --- a/arch/x86_64/kernel/kprobes.c +++ b/arch/x86_64/kernel/kprobes.c @@ -74,7 +74,7 @@ static inline int is_IF_modifier(kprobe_opcode_t *insn) return 0; } -int arch_prepare_kprobe(struct kprobe *p) +int __kprobes arch_prepare_kprobe(struct kprobe *p) { /* insn: must be on special executable page on x86_64. */ up(&kprobe_mutex); @@ -189,7 +189,7 @@ static inline s32 *is_riprel(u8 *insn) return NULL; } -void arch_copy_kprobe(struct kprobe *p) +void __kprobes arch_copy_kprobe(struct kprobe *p) { s32 *ripdisp; memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE); @@ -215,21 +215,21 @@ void arch_copy_kprobe(struct kprobe *p) p->opcode = *p->addr; } -void arch_arm_kprobe(struct kprobe *p) +void __kprobes arch_arm_kprobe(struct kprobe *p) { *p->addr = BREAKPOINT_INSTRUCTION; flush_icache_range((unsigned long) p->addr, (unsigned long) p->addr + sizeof(kprobe_opcode_t)); } -void arch_disarm_kprobe(struct kprobe *p) +void __kprobes arch_disarm_kprobe(struct kprobe *p) { *p->addr = p->opcode; flush_icache_range((unsigned long) p->addr, (unsigned long) p->addr + sizeof(kprobe_opcode_t)); } -void arch_remove_kprobe(struct kprobe *p) +void __kprobes arch_remove_kprobe(struct kprobe *p) { up(&kprobe_mutex); free_insn_slot(p->ainsn.insn); @@ -261,7 +261,7 @@ static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs) kprobe_saved_rflags &= ~IF_MASK; } -static void prepare_singlestep(struct kprobe *p, struct pt_regs *regs) +static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs) { regs->eflags |= TF_MASK; regs->eflags &= ~IF_MASK; @@ -272,7 +272,8 @@ static void prepare_singlestep(struct kprobe *p, struct pt_regs *regs) regs->rip = (unsigned long)p->ainsn.insn; } -void arch_prepare_kretprobe(struct kretprobe *rp, struct pt_regs *regs) +void __kprobes arch_prepare_kretprobe(struct kretprobe *rp, + struct pt_regs *regs) { unsigned long *sara = (unsigned long *)regs->rsp; struct kretprobe_instance *ri; @@ -295,7 +296,7 @@ void arch_prepare_kretprobe(struct kretprobe *rp, struct pt_regs *regs) * Interrupts are disabled on entry as trap3 is an interrupt gate and they * remain disabled thorough out this function. */ -int kprobe_handler(struct pt_regs *regs) +int __kprobes kprobe_handler(struct pt_regs *regs) { struct kprobe *p; int ret = 0; @@ -310,7 +311,8 @@ int kprobe_handler(struct pt_regs *regs) Disarm the probe we just hit, and ignore it. */ p = get_kprobe(addr); if (p) { - if (kprobe_status == KPROBE_HIT_SS) { + if (kprobe_status == KPROBE_HIT_SS && + *p->ainsn.insn == BREAKPOINT_INSTRUCTION) { regs->eflags &= ~TF_MASK; regs->eflags |= kprobe_saved_rflags; unlock_kprobes(); @@ -360,7 +362,10 @@ int kprobe_handler(struct pt_regs *regs) * either a probepoint or a debugger breakpoint * at this address. In either case, no further * handling of this interrupt is appropriate. + * Back up over the (now missing) int3 and run + * the original instruction. */ + regs->rip = (unsigned long)addr; ret = 1; } /* Not one of ours: let kernel handle it */ @@ -399,7 +404,7 @@ no_kprobe: /* * Called when we hit the probe point at kretprobe_trampoline */ -int trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) +int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) { struct kretprobe_instance *ri = NULL; struct hlist_head *head; @@ -478,7 +483,7 @@ int trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) * that is atop the stack is the address following the copied instruction. * We need to make it the address following the original instruction. */ -static void resume_execution(struct kprobe *p, struct pt_regs *regs) +static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) { unsigned long *tos = (unsigned long *)regs->rsp; unsigned long next_rip = 0; @@ -536,7 +541,7 @@ static void resume_execution(struct kprobe *p, struct pt_regs *regs) * Interrupts are disabled on entry as trap1 is an interrupt gate and they * remain disabled thoroughout this function. And we hold kprobe lock. */ -int post_kprobe_handler(struct pt_regs *regs) +int __kprobes post_kprobe_handler(struct pt_regs *regs) { if (!kprobe_running()) return 0; @@ -571,7 +576,7 @@ out: } /* Interrupts disabled, kprobe_lock held. */ -int kprobe_fault_handler(struct pt_regs *regs, int trapnr) +int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr) { if (current_kprobe->fault_handler && current_kprobe->fault_handler(current_kprobe, regs, trapnr)) @@ -590,8 +595,8 @@ int kprobe_fault_handler(struct pt_regs *regs, int trapnr) /* * Wrapper routine for handling exceptions. */ -int kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, - void *data) +int __kprobes kprobe_exceptions_notify(struct notifier_block *self, + unsigned long val, void *data) { struct die_args *args = (struct die_args *)data; switch (val) { @@ -619,7 +624,7 @@ int kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, return NOTIFY_DONE; } -int setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) +int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) { struct jprobe *jp = container_of(p, struct jprobe, kp); unsigned long addr; @@ -640,7 +645,7 @@ int setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) return 1; } -void jprobe_return(void) +void __kprobes jprobe_return(void) { preempt_enable_no_resched(); asm volatile (" xchg %%rbx,%%rsp \n" @@ -651,7 +656,7 @@ void jprobe_return(void) (jprobe_saved_rsp):"memory"); } -int longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) +int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) { u8 *addr = (u8 *) (regs->rip - 1); unsigned long stack_addr = (unsigned long)jprobe_saved_rsp; diff --git a/arch/x86_64/kernel/mpparse.c b/arch/x86_64/kernel/mpparse.c index 79c362d..8d8ed6a 100644 --- a/arch/x86_64/kernel/mpparse.c +++ b/arch/x86_64/kernel/mpparse.c @@ -74,7 +74,7 @@ static unsigned int num_processors = 0; physid_mask_t phys_cpu_present_map = PHYSID_MASK_NONE; /* ACPI MADT entry parsing functions */ -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI extern struct acpi_boot_flags acpi_boot; #ifdef CONFIG_X86_LOCAL_APIC extern int acpi_parse_lapic (acpi_table_entry_header *header); @@ -84,7 +84,7 @@ extern int acpi_parse_lapic_nmi (acpi_table_entry_header *header); #ifdef CONFIG_X86_IO_APIC extern int acpi_parse_ioapic (acpi_table_entry_header *header); #endif /*CONFIG_X86_IO_APIC*/ -#endif /*CONFIG_ACPI_BOOT*/ +#endif /*CONFIG_ACPI*/ u8 bios_cpu_apicid[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID }; @@ -519,8 +519,6 @@ void __init get_smp_config (void) struct intel_mp_floating *mpf = mpf_found; /* - * ACPI may be used to obtain the entire SMP configuration or just to - * enumerate/configure processors (CONFIG_ACPI_BOOT). Note that * ACPI supports both logical (e.g. Hyper-Threading) and physical * processors, where MPS only supports physical. */ @@ -673,7 +671,7 @@ void __init find_smp_config (void) ACPI-based MP Configuration -------------------------------------------------------------------------- */ -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI void __init mp_register_lapic_address ( u64 address) @@ -929,11 +927,9 @@ int mp_register_gsi(u32 gsi, int edge_level, int active_high_low) if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC) return gsi; -#ifdef CONFIG_ACPI_BUS /* Don't set up the ACPI SCI because it's already set up */ if (acpi_fadt.sci_int == gsi) return gsi; -#endif ioapic = mp_find_ioapic(gsi); if (ioapic < 0) { @@ -973,13 +969,11 @@ int mp_register_gsi(u32 gsi, int edge_level, int active_high_low) if (gsi < MAX_GSI_NUM) { if (gsi > 15) gsi = pci_irq++; -#ifdef CONFIG_ACPI_BUS /* * Don't assign IRQ used by ACPI SCI */ if (gsi == acpi_fadt.sci_int) gsi = pci_irq++; -#endif gsi_to_irq[irq] = gsi; } else { printk(KERN_ERR "GSI %u is too high\n", gsi); @@ -994,4 +988,4 @@ int mp_register_gsi(u32 gsi, int edge_level, int active_high_low) } #endif /*CONFIG_X86_IO_APIC*/ -#endif /*CONFIG_ACPI_BOOT*/ +#endif /*CONFIG_ACPI*/ diff --git a/arch/x86_64/kernel/nmi.c b/arch/x86_64/kernel/nmi.c index 64a8e05..caf1649 100644 --- a/arch/x86_64/kernel/nmi.c +++ b/arch/x86_64/kernel/nmi.c @@ -463,6 +463,8 @@ void touch_nmi_watchdog (void) */ for (i = 0; i < NR_CPUS; i++) per_cpu(nmi_touch, i) = 1; + + touch_softlockup_watchdog(); } void nmi_watchdog_tick (struct pt_regs * regs, unsigned reason) @@ -522,14 +524,14 @@ asmlinkage void do_nmi(struct pt_regs * regs, long error_code) nmi_enter(); add_pda(__nmi_count,1); - if (!nmi_callback(regs, cpu)) + if (!rcu_dereference(nmi_callback)(regs, cpu)) default_do_nmi(regs); nmi_exit(); } void set_nmi_callback(nmi_callback_t callback) { - nmi_callback = callback; + rcu_assign_pointer(nmi_callback, callback); } void unset_nmi_callback(void) diff --git a/arch/x86_64/kernel/process.c b/arch/x86_64/kernel/process.c index 7577f9d..8661f82 100644 --- a/arch/x86_64/kernel/process.c +++ b/arch/x86_64/kernel/process.c @@ -310,6 +310,7 @@ void __show_regs(struct pt_regs * regs) void show_regs(struct pt_regs *regs) { + printk("CPU %d:", smp_processor_id()); __show_regs(regs); show_trace(®s->rsp); } diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c index 116a491..0511d80 100644 --- a/arch/x86_64/kernel/setup.c +++ b/arch/x86_64/kernel/setup.c @@ -65,13 +65,13 @@ * Machine setup.. */ -struct cpuinfo_x86 boot_cpu_data; +struct cpuinfo_x86 boot_cpu_data __read_mostly; unsigned long mmu_cr4_features; int acpi_disabled; EXPORT_SYMBOL(acpi_disabled); -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI extern int __initdata acpi_ht; extern acpi_interrupt_flags acpi_sci_flags; int __initdata acpi_force = 0; @@ -294,7 +294,7 @@ static __init void parse_cmdline_early (char ** cmdline_p) maxcpus = simple_strtoul(from + 8, NULL, 0); } #endif -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI /* "acpi=off" disables both ACPI table parsing and interpreter init */ if (!memcmp(from, "acpi=off", 8)) disable_acpi(); @@ -566,7 +566,7 @@ void __init setup_arch(char **cmdline_p) init_memory_mapping(0, (end_pfn_map << PAGE_SHIFT)); -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI /* * Initialize the ACPI boot-time table parser (gets the RSDP and SDT). * Call this early for SRAT node setup. @@ -658,7 +658,7 @@ void __init setup_arch(char **cmdline_p) check_ioapic(); -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI /* * Read APIC and some other early information from ACPI tables. */ diff --git a/arch/x86_64/kernel/setup64.c b/arch/x86_64/kernel/setup64.c index 34082c1..e3ffcac 100644 --- a/arch/x86_64/kernel/setup64.c +++ b/arch/x86_64/kernel/setup64.c @@ -36,7 +36,7 @@ struct desc_ptr idt_descr = { 256 * 16, (unsigned long) idt_table }; char boot_cpu_stack[IRQSTACKSIZE] __attribute__((section(".bss.page_aligned"))); -unsigned long __supported_pte_mask = ~0UL; +unsigned long __supported_pte_mask __read_mostly = ~0UL; static int do_not_nx __initdata = 0; /* noexec=on|off diff --git a/arch/x86_64/kernel/smpboot.c b/arch/x86_64/kernel/smpboot.c index fa25e39..90aeccd 100644 --- a/arch/x86_64/kernel/smpboot.c +++ b/arch/x86_64/kernel/smpboot.c @@ -62,13 +62,13 @@ /* Number of siblings per CPU package */ int smp_num_siblings = 1; /* Package ID of each logical CPU */ -u8 phys_proc_id[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID }; -u8 cpu_core_id[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID }; +u8 phys_proc_id[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = BAD_APICID }; +u8 cpu_core_id[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = BAD_APICID }; EXPORT_SYMBOL(phys_proc_id); EXPORT_SYMBOL(cpu_core_id); /* Bitmask of currently online CPUs */ -cpumask_t cpu_online_map; +cpumask_t cpu_online_map __read_mostly; EXPORT_SYMBOL(cpu_online_map); @@ -88,8 +88,8 @@ struct cpuinfo_x86 cpu_data[NR_CPUS] __cacheline_aligned; /* Set when the idlers are all forked */ int smp_threads_ready; -cpumask_t cpu_sibling_map[NR_CPUS] __cacheline_aligned; -cpumask_t cpu_core_map[NR_CPUS] __cacheline_aligned; +cpumask_t cpu_sibling_map[NR_CPUS] __read_mostly; +cpumask_t cpu_core_map[NR_CPUS] __read_mostly; EXPORT_SYMBOL(cpu_core_map); /* diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c index 66bf6dd..7b6abe0 100644 --- a/arch/x86_64/kernel/time.c +++ b/arch/x86_64/kernel/time.c @@ -176,10 +176,7 @@ int do_settimeofday(struct timespec *tv) set_normalized_timespec(&xtime, sec, nsec); set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); clock_was_set(); @@ -471,7 +468,7 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) * off) isn't likely to go away much sooner anyway. */ - if ((~time_status & STA_UNSYNC) && xtime.tv_sec > rtc_update && + if (ntp_synced() && xtime.tv_sec > rtc_update && abs(xtime.tv_nsec - 500000000) <= tick_nsec / 2) { set_rtc_mmss(xtime.tv_sec); rtc_update = xtime.tv_sec + 660; @@ -1041,6 +1038,7 @@ static int timer_resume(struct sys_device *dev) write_sequnlock_irqrestore(&xtime_lock,flags); jiffies += sleep_length; wall_jiffies += sleep_length; + touch_softlockup_watchdog(); return 0; } diff --git a/arch/x86_64/kernel/traps.c b/arch/x86_64/kernel/traps.c index 6ead433..f238d60 100644 --- a/arch/x86_64/kernel/traps.c +++ b/arch/x86_64/kernel/traps.c @@ -29,6 +29,7 @@ #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/nmi.h> +#include <linux/kprobes.h> #include <asm/system.h> #include <asm/uaccess.h> @@ -419,8 +420,9 @@ void die_nmi(char *str, struct pt_regs *regs) do_exit(SIGSEGV); } -static void do_trap(int trapnr, int signr, char *str, - struct pt_regs * regs, long error_code, siginfo_t *info) +static void __kprobes do_trap(int trapnr, int signr, char *str, + struct pt_regs * regs, long error_code, + siginfo_t *info) { conditional_sti(regs); @@ -504,7 +506,8 @@ DO_ERROR(18, SIGSEGV, "reserved", reserved) DO_ERROR(12, SIGBUS, "stack segment", stack_segment) DO_ERROR( 8, SIGSEGV, "double fault", double_fault) -asmlinkage void do_general_protection(struct pt_regs * regs, long error_code) +asmlinkage void __kprobes do_general_protection(struct pt_regs * regs, + long error_code) { conditional_sti(regs); @@ -622,7 +625,7 @@ asmlinkage void default_do_nmi(struct pt_regs *regs) io_check_error(reason, regs); } -asmlinkage void do_int3(struct pt_regs * regs, long error_code) +asmlinkage void __kprobes do_int3(struct pt_regs * regs, long error_code) { if (notify_die(DIE_INT3, "int3", regs, error_code, 3, SIGTRAP) == NOTIFY_STOP) { return; @@ -653,7 +656,8 @@ asmlinkage struct pt_regs *sync_regs(struct pt_regs *eregs) } /* runs on IST stack. */ -asmlinkage void do_debug(struct pt_regs * regs, unsigned long error_code) +asmlinkage void __kprobes do_debug(struct pt_regs * regs, + unsigned long error_code) { unsigned long condition; struct task_struct *tsk = current; diff --git a/arch/x86_64/kernel/vmlinux.lds.S b/arch/x86_64/kernel/vmlinux.lds.S index 2a94f9b..d4abb07 100644 --- a/arch/x86_64/kernel/vmlinux.lds.S +++ b/arch/x86_64/kernel/vmlinux.lds.S @@ -21,6 +21,7 @@ SECTIONS *(.text) SCHED_TEXT LOCK_TEXT + KPROBES_TEXT *(.fixup) *(.gnu.warning) } = 0x9090 diff --git a/arch/x86_64/mm/fault.c b/arch/x86_64/mm/fault.c index ca914c3..816732d 100644 --- a/arch/x86_64/mm/fault.c +++ b/arch/x86_64/mm/fault.c @@ -23,6 +23,7 @@ #include <linux/vt_kern.h> /* For unblank_screen() */ #include <linux/compiler.h> #include <linux/module.h> +#include <linux/kprobes.h> #include <asm/system.h> #include <asm/uaccess.h> @@ -294,7 +295,8 @@ int exception_trace = 1; * bit 2 == 0 means kernel, 1 means user-mode * bit 3 == 1 means fault was an instruction fetch */ -asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long error_code) +asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, + unsigned long error_code) { struct task_struct *tsk; struct mm_struct *mm; diff --git a/arch/x86_64/mm/numa.c b/arch/x86_64/mm/numa.c index 6a156f5..04f7a33 100644 --- a/arch/x86_64/mm/numa.c +++ b/arch/x86_64/mm/numa.c @@ -22,14 +22,14 @@ #define Dprintk(x...) #endif -struct pglist_data *node_data[MAX_NUMNODES]; +struct pglist_data *node_data[MAX_NUMNODES] __read_mostly; bootmem_data_t plat_node_bdata[MAX_NUMNODES]; int memnode_shift; u8 memnodemap[NODEMAPSIZE]; -unsigned char cpu_to_node[NR_CPUS] = { [0 ... NR_CPUS-1] = NUMA_NO_NODE }; -cpumask_t node_to_cpumask[MAX_NUMNODES]; +unsigned char cpu_to_node[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = NUMA_NO_NODE }; +cpumask_t node_to_cpumask[MAX_NUMNODES] __read_mostly; int numa_off __initdata; diff --git a/arch/x86_64/pci/Makefile b/arch/x86_64/pci/Makefile index 37c92e8..bb34e5e 100644 --- a/arch/x86_64/pci/Makefile +++ b/arch/x86_64/pci/Makefile @@ -8,7 +8,7 @@ CFLAGS += -Iarch/i386/pci obj-y := i386.o obj-$(CONFIG_PCI_DIRECT)+= direct.o obj-y += fixup.o -obj-$(CONFIG_ACPI_PCI) += acpi.o +obj-$(CONFIG_ACPI) += acpi.o obj-y += legacy.o irq.o common.o # mmconfig has a 64bit special obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o diff --git a/arch/x86_64/pci/Makefile-BUS b/arch/x86_64/pci/Makefile-BUS index 291985f..4f0c05a 100644 --- a/arch/x86_64/pci/Makefile-BUS +++ b/arch/x86_64/pci/Makefile-BUS @@ -8,7 +8,7 @@ CFLAGS += -I arch/i386/pci obj-y := i386.o obj-$(CONFIG_PCI_DIRECT)+= direct.o obj-y += fixup.o -obj-$(CONFIG_ACPI_PCI) += acpi.o +obj-$(CONFIG_ACPI) += acpi.o obj-y += legacy.o irq.o common.o # mmconfig has a 64bit special obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o diff --git a/arch/xtensa/kernel/time.c b/arch/xtensa/kernel/time.c index e07287d..1ac7d5c 100644 --- a/arch/xtensa/kernel/time.c +++ b/arch/xtensa/kernel/time.c @@ -122,10 +122,7 @@ int do_settimeofday(struct timespec *tv) set_normalized_timespec(&xtime, sec, nsec); set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); return 0; } @@ -184,7 +181,7 @@ again: next += CCOUNT_PER_JIFFY; do_timer (regs); /* Linux handler in kernel/timer.c */ - if ((time_status & STA_UNSYNC) == 0 && + if (ntp_synced() && xtime.tv_sec - last_rtc_update >= 659 && abs((xtime.tv_nsec/1000)-(1000000-1000000/HZ))<5000000/HZ && jiffies - wall_jiffies == 1) { |