diff options
Diffstat (limited to 'arch')
-rw-r--r-- | arch/arm/mach-at91/at91sam9260.c | 8 | ||||
-rw-r--r-- | arch/arm/mach-at91/at91sam9260_devices.c | 90 | ||||
-rw-r--r-- | arch/arm/mach-at91/board-sam9g20ek.c | 14 |
3 files changed, 112 insertions, 0 deletions
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index 46f7742..63d4432 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -55,6 +55,13 @@ static struct clk adc_clk = { .pmc_mask = 1 << AT91SAM9260_ID_ADC, .type = CLK_TYPE_PERIPHERAL, }; + +static struct clk adc_op_clk = { + .name = "adc_op_clk", + .type = CLK_TYPE_PERIPHERAL, + .rate_hz = 5000000, +}; + static struct clk usart0_clk = { .name = "usart0_clk", .pmc_mask = 1 << AT91SAM9260_ID_US0, @@ -166,6 +173,7 @@ static struct clk *periph_clocks[] __initdata = { &pioB_clk, &pioC_clk, &adc_clk, + &adc_op_clk, &usart0_clk, &usart1_clk, &usart2_clk, diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 5652dde..be0eb26 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -17,12 +17,15 @@ #include <linux/platform_device.h> #include <linux/i2c-gpio.h> +#include <linux/platform_data/at91_adc.h> + #include <mach/board.h> #include <mach/cpu.h> #include <mach/at91sam9260.h> #include <mach/at91sam9260_matrix.h> #include <mach/at91_matrix.h> #include <mach/at91sam9_smc.h> +#include <mach/at91_adc.h> #include "generic.h" @@ -1369,6 +1372,93 @@ void __init at91_add_device_cf(struct at91_cf_data *data) void __init at91_add_device_cf(struct at91_cf_data * data) {} #endif +/* -------------------------------------------------------------------- + * ADCs + * -------------------------------------------------------------------- */ + +#if IS_ENABLED(CONFIG_AT91_ADC) +static struct at91_adc_data adc_data; + +static struct resource adc_resources[] = { + [0] = { + .start = AT91SAM9260_BASE_ADC, + .end = AT91SAM9260_BASE_ADC + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9260_ID_ADC, + .end = AT91SAM9260_ID_ADC, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91_adc_device = { + .name = "at91_adc", + .id = -1, + .dev = { + .platform_data = &adc_data, + }, + .resource = adc_resources, + .num_resources = ARRAY_SIZE(adc_resources), +}; + +static struct at91_adc_trigger at91_adc_triggers[] = { + [0] = { + .name = "timer-counter-0", + .value = AT91_ADC_TRGSEL_TC0 | AT91_ADC_TRGEN, + }, + [1] = { + .name = "timer-counter-1", + .value = AT91_ADC_TRGSEL_TC1 | AT91_ADC_TRGEN, + }, + [2] = { + .name = "timer-counter-2", + .value = AT91_ADC_TRGSEL_TC2 | AT91_ADC_TRGEN, + }, + [3] = { + .name = "external", + .value = AT91_ADC_TRGSEL_EXTERNAL | AT91_ADC_TRGEN, + .is_external = true, + }, +}; + +static struct at91_adc_reg_desc at91_adc_register_g20 = { + .channel_base = AT91_ADC_CHR(0), + .drdy_mask = AT91_ADC_DRDY, + .status_register = AT91_ADC_SR, + .trigger_register = AT91_ADC_MR, +}; + +void __init at91_add_device_adc(struct at91_adc_data *data) +{ + if (!data) + return; + + if (test_bit(0, &data->channels_used)) + at91_set_A_periph(AT91_PIN_PC0, 0); + if (test_bit(1, &data->channels_used)) + at91_set_A_periph(AT91_PIN_PC1, 0); + if (test_bit(2, &data->channels_used)) + at91_set_A_periph(AT91_PIN_PC2, 0); + if (test_bit(3, &data->channels_used)) + at91_set_A_periph(AT91_PIN_PC3, 0); + + if (data->use_external_triggers) + at91_set_A_periph(AT91_PIN_PA22, 0); + + data->num_channels = 4; + data->startup_time = 10; + data->registers = &at91_adc_register_g20; + data->trigger_number = 4; + data->trigger_list = at91_adc_triggers; + + adc_data = *data; + platform_device_register(&at91_adc_device); +} +#else +void __init at91_add_device_adc(struct at91_adc_data *data) {} +#endif + /* -------------------------------------------------------------------- */ /* * These devices are always present and don't need any board-specific diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index 8923ec9..291b0fe 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -32,6 +32,8 @@ #include <linux/regulator/fixed.h> #include <linux/regulator/consumer.h> +#include <linux/platform_data/at91_adc.h> + #include <mach/hardware.h> #include <asm/setup.h> #include <asm/mach-types.h> @@ -318,6 +320,16 @@ static void __init ek_add_device_buttons(void) static void __init ek_add_device_buttons(void) {} #endif +/* + * ADCs + */ + +static struct at91_adc_data ek_adc_data = { + .channels_used = BIT(0) | BIT(1) | BIT(2) | BIT(3), + .use_external_triggers = true, + .vref = 3300, +}; + #if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE) static struct regulator_consumer_supply ek_audio_consumer_supplies[] = { REGULATOR_SUPPLY("AVDD", "0-001b"), @@ -393,6 +405,8 @@ static void __init ek_board_init(void) ek_add_device_gpio_leds(); /* Push Buttons */ ek_add_device_buttons(); + /* ADCs */ + at91_add_device_adc(&ek_adc_data); /* PCK0 provides MCLK to the WM8731 */ at91_set_B_periph(AT91_PIN_PC1, 0); /* SSC (for WM8731) */ |