summaryrefslogtreecommitdiff
path: root/drivers/ata/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/Kconfig')
-rw-r--r--drivers/ata/Kconfig47
1 files changed, 34 insertions, 13 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index e08d322..3e751b7 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -14,7 +14,7 @@ menuconfig ATA
tristate "Serial ATA and Parallel ATA drivers"
depends on HAS_IOMEM
depends on BLOCK
- depends on !(M32R || M68K) || BROKEN
+ depends on !(M32R || M68K || S390) || BROKEN
select SCSI
---help---
If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or
@@ -58,6 +58,19 @@ config ATA_ACPI
You can disable this at kernel boot time by using the
option libata.noacpi=1
+config SATA_ZPODD
+ bool "SATA Zero Power ODD Support"
+ depends on ATA_ACPI
+ default n
+ help
+ This option adds support for SATA ZPODD. It requires both
+ ODD and the platform support, and if enabled, will automatically
+ power on/off the ODD when certain condition is satisfied. This
+ does not impact user's experience of the ODD, only power is saved
+ when ODD is not in use(i.e. no disc inside).
+
+ If unsure, say N.
+
config SATA_PMP
bool "SATA Port Multiplier support"
default y
@@ -163,7 +176,7 @@ config SATA_QSTOR
config SATA_SX4
tristate "Promise SATA SX4 support (Experimental)"
- depends on PCI && EXPERIMENTAL
+ depends on PCI
help
This option enables support for Promise Serial ATA SX4.
@@ -247,6 +260,14 @@ config SATA_PROMISE
If unsure, say N.
+config SATA_RCAR
+ tristate "Renesas R-Car SATA support"
+ depends on ARCH_SHMOBILE && ARCH_R8A7779
+ help
+ This option enables support for Renesas R-Car Serial ATA.
+
+ If unsure, say N.
+
config SATA_SIL
tristate "Silicon Image SATA support"
depends on PCI
@@ -390,7 +411,7 @@ config PATA_CS5530
config PATA_CS5535
tristate "CS5535 PATA support (Experimental)"
- depends on PCI && X86 && !X86_64 && EXPERIMENTAL
+ depends on PCI && X86 && !X86_64
help
This option enables support for the NatSemi/AMD CS5535
companion chip used with the Geode processor family.
@@ -408,7 +429,7 @@ config PATA_CS5536
config PATA_CYPRESS
tristate "Cypress CY82C693 PATA support (Very Experimental)"
- depends on PCI && EXPERIMENTAL
+ depends on PCI
help
This option enables support for the Cypress/Contaq CY82C693
chipset found in some Alpha systems
@@ -496,7 +517,7 @@ config PATA_IMX
config PATA_IT8213
tristate "IT8213 PATA support (Experimental)"
- depends on PCI && EXPERIMENTAL
+ depends on PCI
help
This option enables support for the ITE 821 PATA
controllers via the new ATA layer.
@@ -589,7 +610,7 @@ config PATA_OLDPIIX
config PATA_OPTIDMA
tristate "OPTI FireStar PATA support (Very Experimental)"
- depends on PCI && EXPERIMENTAL
+ depends on PCI
help
This option enables DMA/PIO support for the later OPTi
controllers found on some old motherboards and in some
@@ -616,7 +637,7 @@ config PATA_PDC_OLD
config PATA_RADISYS
tristate "RADISYS 82600 PATA support (Experimental)"
- depends on PCI && EXPERIMENTAL
+ depends on PCI
help
This option enables support for the RADISYS 82600
PATA controllers via the new ATA layer
@@ -687,7 +708,7 @@ config PATA_SIS
config PATA_TOSHIBA
tristate "Toshiba Piccolo support (Experimental)"
- depends on PCI && EXPERIMENTAL
+ depends on PCI
help
Support for the Toshiba Piccolo controllers. Currently only the
primary channel is supported by this driver.
@@ -738,7 +759,7 @@ comment "PIO-only SFF controllers"
config PATA_AT32
tristate "Atmel AVR32 PATA support (Experimental)"
- depends on AVR32 && PLATFORM_AT32AP && EXPERIMENTAL
+ depends on AVR32 && PLATFORM_AT32AP
help
This option enables support for the IDE devices on the
Atmel AT32AP platform.
@@ -755,7 +776,7 @@ config PATA_AT91
config PATA_CMD640_PCI
tristate "CMD640 PCI PATA support (Experimental)"
- depends on PCI && EXPERIMENTAL
+ depends on PCI
help
This option enables support for the CMD640 PCI IDE
interface chip. Only the primary channel is currently
@@ -801,7 +822,7 @@ config PATA_NS87410
config PATA_OPTI
tristate "OPTI621/6215 PATA support (Very Experimental)"
- depends on PCI && EXPERIMENTAL
+ depends on PCI
help
This option enables full PIO support for the early Opti ATA
controllers found on some old motherboards.
@@ -881,7 +902,7 @@ config PATA_SAMSUNG_CF
config PATA_WINBOND_VLB
tristate "Winbond W83759A VLB PATA support (Experimental)"
- depends on ISA && EXPERIMENTAL
+ depends on ISA
select PATA_LEGACY
help
Support for the Winbond W83759A controller on Vesa Local Bus
@@ -909,7 +930,7 @@ config ATA_GENERIC
config PATA_LEGACY
tristate "Legacy ISA PATA support (Experimental)"
- depends on (ISA || PCI) && EXPERIMENTAL
+ depends on (ISA || PCI)
help
This option enables support for ISA/VLB/PCI bus legacy PATA
ports and allows them to be accessed via the new ATA layer.