diff options
Diffstat (limited to 'drivers/ata/libata-sff.c')
| -rw-r--r-- | drivers/ata/libata-sff.c | 43 |
1 files changed, 41 insertions, 2 deletions
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index c561b3b..16bc3e3 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -64,6 +64,46 @@ u8 ata_irq_on(struct ata_port *ap) return tmp; } +u8 ata_dummy_irq_on (struct ata_port *ap) { return 0; } + +/** + * ata_irq_ack - Acknowledge a device interrupt. + * @ap: Port on which interrupts are enabled. + * + * Wait up to 10 ms for legacy IDE device to become idle (BUSY + * or BUSY+DRQ clear). Obtain dma status and port status from + * device. Clear the interrupt. Return port status. + * + * LOCKING: + */ + +u8 ata_irq_ack(struct ata_port *ap, unsigned int chk_drq) +{ + unsigned int bits = chk_drq ? ATA_BUSY | ATA_DRQ : ATA_BUSY; + u8 host_stat, post_stat, status; + + status = ata_busy_wait(ap, bits, 1000); + if (status & bits) + if (ata_msg_err(ap)) + printk(KERN_ERR "abnormal status 0x%X\n", status); + + /* get controller status; clear intr, err bits */ + host_stat = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); + iowrite8(host_stat | ATA_DMA_INTR | ATA_DMA_ERR, + ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); + + post_stat = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); + + if (ata_msg_intr(ap)) + printk(KERN_INFO "%s: irq ack: host_stat 0x%X, new host_stat 0x%X, drv_stat 0x%X\n", + __FUNCTION__, + host_stat, post_stat, status); + + return status; +} + +u8 ata_dummy_irq_ack(struct ata_port *ap, unsigned int chk_drq) { return 0; } + /** * ata_tf_load - send taskfile registers to host controller * @ap: Port to which output is sent @@ -370,8 +410,7 @@ void ata_bmdma_thaw(struct ata_port *ap) /* clear & re-enable interrupts */ ata_chk_status(ap); ap->ops->irq_clear(ap); - if (ap->ioaddr.ctl_addr) /* FIXME: hack. create a hook instead */ - ata_irq_on(ap); + ap->ops->irq_on(ap); } /** |