diff options
Diffstat (limited to 'drivers/ata/pata_cs5530.c')
| -rw-r--r-- | drivers/ata/pata_cs5530.c | 44 |
1 files changed, 26 insertions, 18 deletions
diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c index 1c62801..3d7b7d8 100644 --- a/drivers/ata/pata_cs5530.c +++ b/drivers/ata/pata_cs5530.c @@ -37,6 +37,13 @@ #define DRV_NAME "pata_cs5530" #define DRV_VERSION "0.7.1" +static void __iomem *cs5530_port_base(struct ata_port *ap) +{ + unsigned long bmdma = (unsigned long)ap->ioaddr.bmdma_addr; + + return (void __iomem *)((bmdma & ~0x0F) + 0x20 + 0x10 * ap->port_no); +} + /** * cs5530_set_piomode - PIO setup * @ap: ATA interface @@ -52,19 +59,19 @@ static void cs5530_set_piomode(struct ata_port *ap, struct ata_device *adev) {0x00009172, 0x00012171, 0x00020080, 0x00032010, 0x00040010}, {0xd1329172, 0x71212171, 0x30200080, 0x20102010, 0x00100010} }; - unsigned long base = ( ap->ioaddr.bmdma_addr & ~0x0F) + 0x20 + 0x10 * ap->port_no; + void __iomem *base = cs5530_port_base(ap); u32 tuning; int format; /* Find out which table to use */ - tuning = inl(base + 0x04); + tuning = ioread32(base + 0x04); format = (tuning & 0x80000000UL) ? 1 : 0; /* Now load the right timing register */ if (adev->devno) base += 0x08; - outl(cs5530_pio_timings[format][adev->pio_mode - XFER_PIO_0], base); + iowrite32(cs5530_pio_timings[format][adev->pio_mode - XFER_PIO_0], base); } /** @@ -79,12 +86,12 @@ static void cs5530_set_piomode(struct ata_port *ap, struct ata_device *adev) static void cs5530_set_dmamode(struct ata_port *ap, struct ata_device *adev) { - unsigned long base = ( ap->ioaddr.bmdma_addr & ~0x0F) + 0x20 + 0x10 * ap->port_no; + void __iomem *base = cs5530_port_base(ap); u32 tuning, timing = 0; u8 reg; /* Find out which table to use */ - tuning = inl(base + 0x04); + tuning = ioread32(base + 0x04); switch(adev->dma_mode) { case XFER_UDMA_0: @@ -105,20 +112,20 @@ static void cs5530_set_dmamode(struct ata_port *ap, struct ata_device *adev) /* Merge in the PIO format bit */ timing |= (tuning & 0x80000000UL); if (adev->devno == 0) /* Master */ - outl(timing, base + 0x04); + iowrite32(timing, base + 0x04); else { if (timing & 0x00100000) tuning |= 0x00100000; /* UDMA for both */ else tuning &= ~0x00100000; /* MWDMA for both */ - outl(tuning, base + 0x04); - outl(timing, base + 0x0C); + iowrite32(tuning, base + 0x04); + iowrite32(timing, base + 0x0C); } /* Set the DMA capable bit in the BMDMA area */ - reg = inb(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); + reg = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); reg |= (1 << (5 + adev->devno)); - outb(reg, ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); + iowrite8(reg, ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); /* Remember the last DMA setup we did */ @@ -210,14 +217,14 @@ static struct ata_port_operations cs5530_port_ops = { .qc_prep = ata_qc_prep, .qc_issue = cs5530_qc_issue_prot, - .data_xfer = ata_pio_data_xfer, + .data_xfer = ata_data_xfer, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, + .irq_on = ata_irq_on, + .irq_ack = ata_irq_ack, .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = ata_host_stop }; static struct dmi_system_id palmax_dmi_table[] = { @@ -247,7 +254,7 @@ static int cs5530_is_palmax(void) * Perform the chip initialisation work that is shared between both * setup and resume paths */ - + static int cs5530_init_chip(void) { struct pci_dev *master_0 = NULL, *cs5530_0 = NULL, *dev = NULL; @@ -357,11 +364,11 @@ static int cs5530_init_one(struct pci_dev *pdev, const struct pci_device_id *id) .port_ops = &cs5530_port_ops }; static struct ata_port_info *port_info[2] = { &info, &info }; - + /* Chip initialisation */ if (cs5530_init_chip()) return -ENODEV; - + if (cs5530_is_palmax()) port_info[1] = &info_palmax_secondary; @@ -372,10 +379,11 @@ static int cs5530_init_one(struct pci_dev *pdev, const struct pci_device_id *id) static int cs5530_reinit_one(struct pci_dev *pdev) { /* If we fail on resume we are doomed */ - BUG_ON(cs5530_init_chip()); + if (cs5530_init_chip()) + BUG(); return ata_pci_device_resume(pdev); } - + static const struct pci_device_id cs5530[] = { { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5530_IDE), }, |