diff options
Diffstat (limited to 'drivers/char/istallion.c')
| -rw-r--r-- | drivers/char/istallion.c | 1164 |
1 files changed, 561 insertions, 603 deletions
diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c index 8f59194..68645d3 100644 --- a/drivers/char/istallion.c +++ b/drivers/char/istallion.c @@ -14,14 +14,6 @@ * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ /*****************************************************************************/ @@ -41,6 +33,7 @@ #include <linux/device.h> #include <linux/wait.h> #include <linux/eisa.h> +#include <linux/ctype.h> #include <asm/io.h> #include <asm/uaccess.h> @@ -61,21 +54,10 @@ #define BRD_BRUMBY4 2 #define BRD_ONBOARD2 3 #define BRD_ONBOARD 4 -#define BRD_BRUMBY8 5 -#define BRD_BRUMBY16 6 #define BRD_ONBOARDE 7 -#define BRD_ONBOARD32 9 -#define BRD_ONBOARD2_32 10 -#define BRD_ONBOARDRS 11 -#define BRD_EASYIO 20 -#define BRD_ECH 21 -#define BRD_ECHMC 22 #define BRD_ECP 23 #define BRD_ECPE 24 #define BRD_ECPMC 25 -#define BRD_ECHPCI 26 -#define BRD_ECH64PCI 27 -#define BRD_EASYIOPCI 28 #define BRD_ECPPCI 29 #define BRD_BRUMBY BRD_BRUMBY4 @@ -119,20 +101,16 @@ * interrupt is required. */ -typedef struct { +struct stlconf { int brdtype; int ioaddr1; int ioaddr2; unsigned long memaddr; int irq; int irqtype; -} stlconf_t; - -static stlconf_t stli_brdconf[] = { - /*{ BRD_ECP, 0x2a0, 0, 0xcc000, 0, 0 },*/ }; -static int stli_nrbrds = ARRAY_SIZE(stli_brdconf); +static unsigned int stli_nrbrds; /* stli_lock must NOT be taken holding brd_lock */ static spinlock_t stli_lock; /* TTY logic lock */ @@ -194,9 +172,11 @@ static struct tty_struct *stli_txcooktty; * with this termios initially. Basically all it defines is a raw port * at 9600 baud, 8 data bits, no parity, 1 stop bit. */ -static struct termios stli_deftermios = { +static struct ktermios stli_deftermios = { .c_cflag = (B9600 | CS8 | CREAD | HUPCL | CLOCAL), .c_cc = INIT_C_CC, + .c_ispeed = 9600, + .c_ospeed = 9600, }; /* @@ -205,13 +185,12 @@ static struct termios stli_deftermios = { */ static comstats_t stli_comstats; static combrd_t stli_brdstats; -static asystats_t stli_cdkstats; -static stlibrd_t stli_dummybrd; -static stliport_t stli_dummyport; +static struct asystats stli_cdkstats; /*****************************************************************************/ -static stlibrd_t *stli_brds[STL_MAXBRDS]; +static DEFINE_MUTEX(stli_brdslock); +static struct stlibrd *stli_brds[STL_MAXBRDS]; static int stli_shared; @@ -223,6 +202,7 @@ static int stli_shared; */ #define BST_FOUND 0x1 #define BST_STARTED 0x2 +#define BST_PROBED 0x4 /* * Define the set of port state flags. These are marked for internal @@ -255,18 +235,18 @@ static char *stli_brdnames[] = { "Brumby", "Brumby", "ONboard-EI", - (char *) NULL, + NULL, "ONboard", "ONboard-MC", "ONboard-MC", - (char *) NULL, - (char *) NULL, - (char *) NULL, - (char *) NULL, - (char *) NULL, - (char *) NULL, - (char *) NULL, - (char *) NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, "EasyIO", "EC8/32-AT", "EC8/32-MC", @@ -304,12 +284,10 @@ static char **stli_brdsp[] = { * parse any module arguments. */ -typedef struct stlibrdtype { +static struct stlibrdtype { char *name; int type; -} stlibrdtype_t; - -static stlibrdtype_t stli_brdstr[] = { +} stli_brdstr[] = { { "stallion", BRD_STALLION }, { "1", BRD_STALLION }, { "brumby", BRD_BRUMBY }, @@ -379,6 +357,7 @@ MODULE_PARM_DESC(board2, "Board 2 config -> name[,ioaddr[,memaddr]"); module_param_array(board3, charp, NULL, 0); MODULE_PARM_DESC(board3, "Board 3 config -> name[,ioaddr[,memaddr]"); +#if STLI_EISAPROBE != 0 /* * Set up a default memory address table for EISA board probing. * The default addresses are all bellow 1Mbyte, which has to be the @@ -396,14 +375,11 @@ static unsigned long stli_eisamemprobeaddrs[] = { }; static int stli_eisamempsize = ARRAY_SIZE(stli_eisamemprobeaddrs); +#endif /* * Define the Stallion PCI vendor and device IDs. */ -#ifdef CONFIG_PCI -#ifndef PCI_VENDOR_ID_STALLION -#define PCI_VENDOR_ID_STALLION 0x124d -#endif #ifndef PCI_DEVICE_ID_ECRA #define PCI_DEVICE_ID_ECRA 0x0004 #endif @@ -414,7 +390,7 @@ static struct pci_device_id istallion_pci_tbl[] = { }; MODULE_DEVICE_TABLE(pci, istallion_pci_tbl); -#endif /* CONFIG_PCI */ +static struct pci_driver stli_pcidriver; /*****************************************************************************/ @@ -615,22 +591,10 @@ MODULE_DEVICE_TABLE(pci, istallion_pci_tbl); /*****************************************************************************/ /* - * Define some handy local macros... - */ -#undef MIN -#define MIN(a,b) (((a) <= (b)) ? (a) : (b)) - -#undef TOLOWER -#define TOLOWER(x) ((((x) >= 'A') && ((x) <= 'Z')) ? ((x) + 0x20) : (x)) - -/*****************************************************************************/ - -/* * Prototype all functions in this driver! */ -static int stli_parsebrd(stlconf_t *confp, char **argp); -static int stli_init(void); +static int stli_parsebrd(struct stlconf *confp, char **argp); static int stli_open(struct tty_struct *tty, struct file *filp); static void stli_close(struct tty_struct *tty, struct file *filp); static int stli_write(struct tty_struct *tty, const unsigned char *buf, int count); @@ -639,7 +603,7 @@ static void stli_flushchars(struct tty_struct *tty); static int stli_writeroom(struct tty_struct *tty); static int stli_charsinbuffer(struct tty_struct *tty); static int stli_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); -static void stli_settermios(struct tty_struct *tty, struct termios *old); +static void stli_settermios(struct tty_struct *tty, struct ktermios *old); static void stli_throttle(struct tty_struct *tty); static void stli_unthrottle(struct tty_struct *tty); static void stli_stop(struct tty_struct *tty); @@ -649,86 +613,84 @@ static void stli_breakctl(struct tty_struct *tty, int state); static void stli_waituntilsent(struct tty_struct *tty, int timeout); static void stli_sendxchar(struct tty_struct *tty, char ch); static void stli_hangup(struct tty_struct *tty); -static int stli_portinfo(stlibrd_t *brdp, stliport_t *portp, int portnr, char *pos); +static int stli_portinfo(struct stlibrd *brdp, struct stliport *portp, int portnr, char *pos); -static int stli_brdinit(stlibrd_t *brdp); -static int stli_startbrd(stlibrd_t *brdp); +static int stli_brdinit(struct stlibrd *brdp); +static int stli_startbrd(struct stlibrd *brdp); static ssize_t stli_memread(struct file *fp, char __user *buf, size_t count, loff_t *offp); static ssize_t stli_memwrite(struct file *fp, const char __user *buf, size_t count, loff_t *offp); static int stli_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, unsigned long arg); -static void stli_brdpoll(stlibrd_t *brdp, cdkhdr_t __iomem *hdrp); +static void stli_brdpoll(struct stlibrd *brdp, cdkhdr_t __iomem *hdrp); static void stli_poll(unsigned long arg); -static int stli_hostcmd(stlibrd_t *brdp, stliport_t *portp); -static int stli_initopen(stlibrd_t *brdp, stliport_t *portp); -static int stli_rawopen(stlibrd_t *brdp, stliport_t *portp, unsigned long arg, int wait); -static int stli_rawclose(stlibrd_t *brdp, stliport_t *portp, unsigned long arg, int wait); -static int stli_waitcarrier(stlibrd_t *brdp, stliport_t *portp, struct file *filp); +static int stli_hostcmd(struct stlibrd *brdp, struct stliport *portp); +static int stli_initopen(struct stlibrd *brdp, struct stliport *portp); +static int stli_rawopen(struct stlibrd *brdp, struct stliport *portp, unsigned long arg, int wait); +static int stli_rawclose(struct stlibrd *brdp, struct stliport *portp, unsigned long arg, int wait); +static int stli_waitcarrier(struct stlibrd *brdp, struct stliport *portp, struct file *filp); static void stli_dohangup(struct work_struct *); -static int stli_setport(stliport_t *portp); -static int stli_cmdwait(stlibrd_t *brdp, stliport_t *portp, unsigned long cmd, void *arg, int size, int copyback); -static void stli_sendcmd(stlibrd_t *brdp, stliport_t *portp, unsigned long cmd, void *arg, int size, int copyback); -static void __stli_sendcmd(stlibrd_t *brdp, stliport_t *portp, unsigned long cmd, void *arg, int size, int copyback); -static void stli_dodelaycmd(stliport_t *portp, cdkctrl_t __iomem *cp); -static void stli_mkasyport(stliport_t *portp, asyport_t *pp, struct termios *tiosp); +static int stli_setport(struct stliport *portp); +static int stli_cmdwait(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback); +static void stli_sendcmd(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback); +static void __stli_sendcmd(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback); +static void stli_dodelaycmd(struct stliport *portp, cdkctrl_t __iomem *cp); +static void stli_mkasyport(struct stliport *portp, asyport_t *pp, struct ktermios *tiosp); static void stli_mkasysigs(asysigs_t *sp, int dtr, int rts); static long stli_mktiocm(unsigned long sigvalue); -static void stli_read(stlibrd_t *brdp, stliport_t *portp); -static int stli_getserial(stliport_t *portp, struct serial_struct __user *sp); -static int stli_setserial(stliport_t *portp, struct serial_struct __user *sp); +static void stli_read(struct stlibrd *brdp, struct stliport *portp); +static int stli_getserial(struct stliport *portp, struct serial_struct __user *sp); +static int stli_setserial(struct stliport *portp, struct serial_struct __user *sp); static int stli_getbrdstats(combrd_t __user *bp); -static int stli_getportstats(stliport_t *portp, comstats_t __user *cp); -static int stli_portcmdstats(stliport_t *portp); -static int stli_clrportstats(stliport_t *portp, comstats_t __user *cp); -static int stli_getportstruct(stliport_t __user *arg); -static int stli_getbrdstruct(stlibrd_t __user *arg); -static stlibrd_t *stli_allocbrd(void); - -static void stli_ecpinit(stlibrd_t *brdp); -static void stli_ecpenable(stlibrd_t *brdp); -static void stli_ecpdisable(stlibrd_t *brdp); -static void __iomem *stli_ecpgetmemptr(stlibrd_t *brdp, unsigned long offset, int line); -static void stli_ecpreset(stlibrd_t *brdp); -static void stli_ecpintr(stlibrd_t *brdp); -static void stli_ecpeiinit(stlibrd_t *brdp); -static void stli_ecpeienable(stlibrd_t *brdp); -static void stli_ecpeidisable(stlibrd_t *brdp); -static void __iomem *stli_ecpeigetmemptr(stlibrd_t *brdp, unsigned long offset, int line); -static void stli_ecpeireset(stlibrd_t *brdp); -static void stli_ecpmcenable(stlibrd_t *brdp); -static void stli_ecpmcdisable(stlibrd_t *brdp); -static void __iomem *stli_ecpmcgetmemptr(stlibrd_t *brdp, unsigned long offset, int line); -static void stli_ecpmcreset(stlibrd_t *brdp); -static void stli_ecppciinit(stlibrd_t *brdp); -static void __iomem *stli_ecppcigetmemptr(stlibrd_t *brdp, unsigned long offset, int line); -static void stli_ecppcireset(stlibrd_t *brdp); - -static void stli_onbinit(stlibrd_t *brdp); -static void stli_onbenable(stlibrd_t *brdp); -static void stli_onbdisable(stlibrd_t *brdp); -static void __iomem *stli_onbgetmemptr(stlibrd_t *brdp, unsigned long offset, int line); -static void stli_onbreset(stlibrd_t *brdp); -static void stli_onbeinit(stlibrd_t *brdp); -static void stli_onbeenable(stlibrd_t *brdp); -static void stli_onbedisable(stlibrd_t *brdp); -static void __iomem *stli_onbegetmemptr(stlibrd_t *brdp, unsigned long offset, int line); -static void stli_onbereset(stlibrd_t *brdp); -static void stli_bbyinit(stlibrd_t *brdp); -static void __iomem *stli_bbygetmemptr(stlibrd_t *brdp, unsigned long offset, int line); -static void stli_bbyreset(stlibrd_t *brdp); -static void stli_stalinit(stlibrd_t *brdp); -static void __iomem *stli_stalgetmemptr(stlibrd_t *brdp, unsigned long offset, int line); -static void stli_stalreset(stlibrd_t *brdp); - -static stliport_t *stli_getport(int brdnr, int panelnr, int portnr); - -static int stli_initecp(stlibrd_t *brdp); -static int stli_initonb(stlibrd_t *brdp); -static int stli_eisamemprobe(stlibrd_t *brdp); -static int stli_initports(stlibrd_t *brdp); - -#ifdef CONFIG_PCI -static int stli_initpcibrd(int brdtype, struct pci_dev *devp); +static int stli_getportstats(struct stliport *portp, comstats_t __user *cp); +static int stli_portcmdstats(struct stliport *portp); +static int stli_clrportstats(struct stliport *portp, comstats_t __user *cp); +static int stli_getportstruct(struct stliport __user *arg); +static int stli_getbrdstruct(struct stlibrd __user *arg); +static struct stlibrd *stli_allocbrd(void); + +static void stli_ecpinit(struct stlibrd *brdp); +static void stli_ecpenable(struct stlibrd *brdp); +static void stli_ecpdisable(struct stlibrd *brdp); +static void __iomem *stli_ecpgetmemptr(struct stlibrd *brdp, unsigned long offset, int line); +static void stli_ecpreset(struct stlibrd *brdp); +static void stli_ecpintr(struct stlibrd *brdp); +static void stli_ecpeiinit(struct stlibrd *brdp); +static void stli_ecpeienable(struct stlibrd *brdp); +static void stli_ecpeidisable(struct stlibrd *brdp); +static void __iomem *stli_ecpeigetmemptr(struct stlibrd *brdp, unsigned long offset, int line); +static void stli_ecpeireset(struct stlibrd *brdp); +static void stli_ecpmcenable(struct stlibrd *brdp); +static void stli_ecpmcdisable(struct stlibrd *brdp); +static void __iomem *stli_ecpmcgetmemptr(struct stlibrd *brdp, unsigned long offset, int line); +static void stli_ecpmcreset(struct stlibrd *brdp); +static void stli_ecppciinit(struct stlibrd *brdp); +static void __iomem *stli_ecppcigetmemptr(struct stlibrd *brdp, unsigned long offset, int line); +static void stli_ecppcireset(struct stlibrd *brdp); + +static void stli_onbinit(struct stlibrd *brdp); +static void stli_onbenable(struct stlibrd *brdp); +static void stli_onbdisable(struct stlibrd *brdp); +static void __iomem *stli_onbgetmemptr(struct stlibrd *brdp, unsigned long offset, int line); +static void stli_onbreset(struct stlibrd *brdp); +static void stli_onbeinit(struct stlibrd *brdp); +static void stli_onbeenable(struct stlibrd *brdp); +static void stli_onbedisable(struct stlibrd *brdp); +static void __iomem *stli_onbegetmemptr(struct stlibrd *brdp, unsigned long offset, int line); +static void stli_onbereset(struct stlibrd *brdp); +static void stli_bbyinit(struct stlibrd *brdp); +static void __iomem *stli_bbygetmemptr(struct stlibrd *brdp, unsigned long offset, int line); +static void stli_bbyreset(struct stlibrd *brdp); +static void stli_stalinit(struct stlibrd *brdp); +static void __iomem *stli_stalgetmemptr(struct stlibrd *brdp, unsigned long offset, int line); +static void stli_stalreset(struct stlibrd *brdp); + +static struct stliport *stli_getport(unsigned int brdnr, unsigned int panelnr, unsigned int portnr); + +static int stli_initecp(struct stlibrd *brdp); +static int stli_initonb(struct stlibrd *brdp); +#if STLI_EISAPROBE != 0 +static int stli_eisamemprobe(struct stlibrd *brdp); #endif +static int stli_initports(struct stlibrd *brdp); /*****************************************************************************/ @@ -766,136 +728,19 @@ static int stli_timeron; static struct class *istallion_class; -/* - * Loadable module initialization stuff. - */ - -static int __init istallion_module_init(void) -{ - stli_init(); - return 0; -} - -/*****************************************************************************/ - -static void __exit istallion_module_exit(void) -{ - stlibrd_t *brdp; - stliport_t *portp; - int i, j; - - printk(KERN_INFO "Unloading %s: version %s\n", stli_drvtitle, - stli_drvversion); - - /* - * Free up all allocated resources used by the ports. This includes - * memory and interrupts. - */ - if (stli_timeron) { - stli_timeron = 0; - del_timer_sync(&stli_timerlist); - } - - i = tty_unregister_driver(stli_serial); - if (i) { - printk("STALLION: failed to un-register tty driver, " - "errno=%d\n", -i); - return; - } - put_tty_driver(stli_serial); - for (i = 0; i < 4; i++) - class_device_destroy(istallion_class, MKDEV(STL_SIOMEMMAJOR, i)); - class_destroy(istallion_class); - if ((i = unregister_chrdev(STL_SIOMEMMAJOR, "staliomem"))) - printk("STALLION: failed to un-register serial memory device, " - "errno=%d\n", -i); - - kfree(stli_txcookbuf); - - for (i = 0; (i < stli_nrbrds); i++) { - if ((brdp = stli_brds[i]) == NULL) - continue; - for (j = 0; (j < STL_MAXPORTS); j++) { - portp = brdp->ports[j]; - if (portp != NULL) { - if (portp->tty != NULL) - tty_hangup(portp->tty); - kfree(portp); - } - } - - iounmap(brdp->membase); - if (brdp->iosize > 0) - release_region(brdp->iobase, brdp->iosize); - kfree(brdp); - stli_brds[i] = NULL; - } -} - -module_init(istallion_module_init); -module_exit(istallion_module_exit); - -/*****************************************************************************/ - -/* - * Check for any arguments passed in on the module load command line. - */ - -static void stli_argbrds(void) +static void stli_cleanup_ports(struct stlibrd *brdp) { - stlconf_t conf; - stlibrd_t *brdp; - int i; - - for (i = stli_nrbrds; i < ARRAY_SIZE(stli_brdsp); i++) { - memset(&conf, 0, sizeof(conf)); - if (stli_parsebrd(&conf, stli_brdsp[i]) == 0) - continue; - if ((brdp = stli_allocbrd()) == NULL) - continue; - stli_nrbrds = i + 1; - brdp->brdnr = i; - brdp->brdtype = conf.brdtype; - brdp->iobase = conf.ioaddr1; - brdp->memaddr = conf.memaddr; - stli_brdinit(brdp); - } -} - -/*****************************************************************************/ - -/* - * Convert an ascii string number into an unsigned long. - */ - -static unsigned long stli_atol(char *str) -{ - unsigned long val; - int base, c; - char *sp; - - val = 0; - sp = str; - if ((*sp == '0') && (*(sp+1) == 'x')) { - base = 16; - sp += 2; - } else if (*sp == '0') { - base = 8; - sp++; - } else { - base = 10; - } - - for (; (*sp != 0); sp++) { - c = (*sp > '9') ? (TOLOWER(*sp) - 'a' + 10) : (*sp - '0'); - if ((c < 0) || (c >= base)) { - printk("STALLION: invalid argument %s\n", str); - val = 0; - break; + struct stliport *portp; + unsigned int j; + + for (j = 0; j < STL_MAXPORTS; j++) { + portp = brdp->ports[j]; + if (portp != NULL) { + if (portp->tty != NULL) + tty_hangup(portp->tty); + kfree(portp); } - val = (val * base) + c; } - return(val); } /*****************************************************************************/ @@ -904,16 +749,16 @@ static unsigned long stli_atol(char *str) * Parse the supplied argument string, into the board conf struct. */ -static int stli_parsebrd(stlconf_t *confp, char **argp) +static int stli_parsebrd(struct stlconf *confp, char **argp) { + unsigned int i; char *sp; - int i; if (argp[0] == NULL || *argp[0] == 0) return 0; for (sp = argp[0], i = 0; ((*sp != 0) && (i < 25)); sp++, i++) - *sp = TOLOWER(*sp); + *sp = tolower(*sp); for (i = 0; i < ARRAY_SIZE(stli_brdstr); i++) { if (strcmp(stli_brdstr[i].name, argp[0]) == 0) @@ -926,9 +771,9 @@ static int stli_parsebrd(stlconf_t *confp, char **argp) confp->brdtype = stli_brdstr[i].type; if (argp[1] != NULL && *argp[1] != 0) - confp->ioaddr1 = stli_atol(argp[1]); + confp->ioaddr1 = simple_strtoul(argp[1], NULL, 0); if (argp[2] != NULL && *argp[2] != 0) - confp->memaddr = stli_atol(argp[2]); + confp->memaddr = simple_strtoul(argp[2], NULL, 0); return(1); } @@ -936,10 +781,10 @@ static int stli_parsebrd(stlconf_t *confp, char **argp) static int stli_open(struct tty_struct *tty, struct file *filp) { - stlibrd_t *brdp; - stliport_t *portp; - unsigned int minordev; - int brdnr, portnr, rc; + struct stlibrd *brdp; + struct stliport *portp; + unsigned int minordev, brdnr, portnr; + int rc; minordev = tty->index; brdnr = MINOR2BRD(minordev); @@ -951,7 +796,7 @@ static int stli_open(struct tty_struct *tty, struct file *filp) if ((brdp->state & BST_STARTED) == 0) return -ENODEV; portnr = MINOR2PORT(minordev); - if ((portnr < 0) || (portnr > brdp->nrports)) + if (portnr > brdp->nrports) return -ENODEV; portp = brdp->ports[portnr]; @@ -1031,8 +876,8 @@ static int stli_open(struct tty_struct *tty, struct file *filp) static void stli_close(struct tty_struct *tty, struct file *filp) { - stlibrd_t *brdp; - stliport_t *portp; + struct stlibrd *brdp; + struct stliport *portp; unsigned long flags; portp = tty->driver_data; @@ -1109,7 +954,7 @@ static void stli_close(struct tty_struct *tty, struct file *filp) * this still all happens pretty quickly. */ -static int stli_initopen(stlibrd_t *brdp, stliport_t *portp) +static int stli_initopen(struct stlibrd *brdp, struct stliport *portp) { struct tty_struct *tty; asynotify_t nt; @@ -1157,7 +1002,7 @@ static int stli_initopen(stlibrd_t *brdp, stliport_t *portp) * to overlap. */ -static int stli_rawopen(stlibrd_t *brdp, stliport_t *portp, unsigned long arg, int wait) +static int stli_rawopen(struct stlibrd *brdp, struct stliport *portp, unsigned long arg, int wait) { cdkhdr_t __iomem *hdrp; cdkctrl_t __iomem *cp; @@ -1228,7 +1073,7 @@ static int stli_rawopen(stlibrd_t *brdp, stliport_t *portp, unsigned long arg, i * wait is true then must have user context (to sleep). */ -static int stli_rawclose(stlibrd_t *brdp, stliport_t *portp, unsigned long arg, int wait) +static int stli_rawclose(struct stlibrd *brdp, struct stliport *portp, unsigned long arg, int wait) { cdkhdr_t __iomem *hdrp; cdkctrl_t __iomem *cp; @@ -1292,7 +1137,7 @@ static int stli_rawclose(stlibrd_t *brdp, stliport_t *portp, unsigned long arg, * to complete (as opposed to initiating the command then returning). */ -static int stli_cmdwait(stlibrd_t *brdp, stliport_t *portp, unsigned long cmd, void *arg, int size, int copyback) +static int stli_cmdwait(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback) { wait_event_interruptible(portp->raw_wait, !test_bit(ST_CMDING, &portp->state)); @@ -1318,16 +1163,16 @@ static int stli_cmdwait(stlibrd_t *brdp, stliport_t *portp, unsigned long cmd, v * waiting for the command to complete - so must have user context. */ -static int stli_setport(stliport_t *portp) +static int stli_setport(struct stliport *portp) { - stlibrd_t *brdp; + struct stlibrd *brdp; asyport_t aport; if (portp == NULL) return -ENODEV; if (portp->tty == NULL) return -ENODEV; - if (portp->brdnr < 0 && portp->brdnr >= stli_nrbrds) + if (portp->brdnr >= stli_nrbrds) return -ENODEV; brdp = stli_brds[portp->brdnr]; if (brdp == NULL) @@ -1344,7 +1189,7 @@ static int stli_setport(stliport_t *portp) * maybe because if we are clocal then we don't need to wait... */ -static int stli_waitcarrier(stlibrd_t *brdp, stliport_t *portp, struct file *filp) +static int stli_waitcarrier(struct stlibrd *brdp, struct stliport *portp, struct file *filp) { unsigned long flags; int rc, doclocal; @@ -1409,8 +1254,8 @@ static int stli_write(struct tty_struct *tty, const unsigned char *buf, int coun unsigned char __iomem *bits; unsigned char __iomem *shbuf; unsigned char *chbuf; - stliport_t *portp; - stlibrd_t *brdp; + struct stliport *portp; + struct stlibrd *brdp; unsigned int len, stlen, head, tail, size; unsigned long flags; @@ -1419,7 +1264,7 @@ static int stli_write(struct tty_struct *tty, const unsigned char *buf, int coun portp = tty->driver_data; if (portp == NULL) return 0; - if ((portp->brdnr < 0) || (portp->brdnr >= stli_nrbrds)) + if (portp->brdnr >= stli_nrbrds) return 0; brdp = stli_brds[portp->brdnr]; if (brdp == NULL) @@ -1445,12 +1290,12 @@ static int stli_write(struct tty_struct *tty, const unsigned char *buf, int coun stlen = len; } - len = MIN(len, count); + len = min(len, (unsigned int)count); count = 0; shbuf = (char __iomem *) EBRDGETMEMPTR(brdp, portp->txoffset); while (len > 0) { - stlen = MIN(len, stlen); + stlen = min(len, stlen); memcpy_toio(shbuf + head, chbuf, stlen); chbuf += stlen; len -= stlen; @@ -1516,8 +1361,8 @@ static void stli_flushchars(struct tty_struct *tty) unsigned char __iomem *bits; cdkasy_t __iomem *ap; struct tty_struct *cooktty; - stliport_t *portp; - stlibrd_t *brdp; + struct stliport *portp; + struct stlibrd *brdp; unsigned int len, stlen, head, tail, size, count, cooksize; unsigned char *buf; unsigned char __iomem *shbuf; @@ -1541,7 +1386,7 @@ static void stli_flushchars(struct tty_struct *tty) portp = tty->driver_data; if (portp == NULL) return; - if ((portp->brdnr < 0) || (portp->brdnr >= stli_nrbrds)) + if (portp->brdnr >= stli_nrbrds) return; brdp = stli_brds[portp->brdnr]; if (brdp == NULL) @@ -1564,13 +1409,13 @@ static void stli_flushchars(struct tty_struct *tty) stlen = len; } - len = MIN(len, cooksize); + len = min(len, cooksize); count = 0; shbuf = EBRDGETMEMPTR(brdp, portp->txoffset); buf = stli_txcookbuf; while (len > 0) { - stlen = MIN(len, stlen); + stlen = min(len, stlen); memcpy_toio(shbuf + head, buf, stlen); buf += stlen; len -= stlen; @@ -1604,8 +1449,8 @@ static void stli_flushchars(struct tty_struct *tty) static int stli_writeroom(struct tty_struct *tty) { cdkasyrq_t __iomem *rp; - stliport_t *portp; - stlibrd_t *brdp; + struct stliport *portp; + struct stlibrd *brdp; unsigned int head, tail, len; unsigned long flags; @@ -1619,7 +1464,7 @@ static int stli_writeroom(struct tty_struct *tty) portp = tty->driver_data; if (portp == NULL) return 0; - if ((portp->brdnr < 0) || (portp->brdnr >= stli_nrbrds)) + if (portp->brdnr >= stli_nrbrds) return 0; brdp = stli_brds[portp->brdnr]; if (brdp == NULL) @@ -1657,8 +1502,8 @@ static int stli_writeroom(struct tty_struct *tty) static int stli_charsinbuffer(struct tty_struct *tty) { cdkasyrq_t __iomem *rp; - stliport_t *portp; - stlibrd_t *brdp; + struct stliport *portp; + struct stlibrd *brdp; unsigned int head, tail, len; unsigned long flags; @@ -1667,7 +1512,7 @@ static int stli_charsinbuffer(struct tty_struct *tty) portp = tty->driver_data; if (portp == NULL) return 0; - if ((portp->brdnr < 0) || (portp->brdnr >= stli_nrbrds)) + if (portp->brdnr >= stli_nrbrds) return 0; brdp = stli_brds[portp->brdnr]; if (brdp == NULL) @@ -1695,10 +1540,10 @@ static int stli_charsinbuffer(struct tty_struct *tty) * Generate the serial struct info. */ -static int stli_getserial(stliport_t *portp, struct serial_struct __user *sp) +static int stli_getserial(struct stliport *portp, struct serial_struct __user *sp) { struct serial_struct sio; - stlibrd_t *brdp; + struct stlibrd *brdp; memset(&sio, 0, sizeof(struct serial_struct)); sio.type = PORT_UNKNOWN; @@ -1728,7 +1573,7 @@ static int stli_getserial(stliport_t *portp, struct serial_struct __user *sp) * just quietly ignore any requests to change irq, etc. */ -static int stli_setserial(stliport_t *portp, struct serial_struct __user *sp) +static int stli_setserial(struct stliport *portp, struct serial_struct __user *sp) { struct serial_struct sio; int rc; @@ -1759,13 +1604,13 @@ static int stli_setserial(stliport_t *portp, struct serial_struct __user *sp) static int stli_tiocmget(struct tty_struct *tty, struct file *file) { - stliport_t *portp = tty->driver_data; - stlibrd_t *brdp; + struct stliport *portp = tty->driver_data; + struct stlibrd *brdp; int rc; if (portp == NULL) return -ENODEV; - if (portp->brdnr < 0 || portp->brdnr >= stli_nrbrds) + if (portp->brdnr >= stli_nrbrds) return 0; brdp = stli_brds[portp->brdnr]; if (brdp == NULL) @@ -1783,13 +1628,13 @@ static int stli_tiocmget(struct tty_struct *tty, struct file *file) static int stli_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { - stliport_t *portp = tty->driver_data; - stlibrd_t *brdp; + struct stliport *portp = tty->driver_data; + struct stlibrd *brdp; int rts = -1, dtr = -1; if (portp == NULL) return -ENODEV; - if (portp->brdnr < 0 || portp->brdnr >= stli_nrbrds) + if (portp->brdnr >= stli_nrbrds) return 0; brdp = stli_brds[portp->brdnr]; if (brdp == NULL) @@ -1814,8 +1659,8 @@ static int stli_tiocmset(struct tty_struct *tty, struct file *file, static int stli_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { - stliport_t *portp; - stlibrd_t *brdp; + struct stliport *portp; + struct stlibrd *brdp; unsigned int ival; int rc; void __user *argp = (void __user *)arg; @@ -1823,7 +1668,7 @@ static int stli_ioctl(struct tty_struct *tty, struct file *file, unsigned int cm portp = tty->driver_data; if (portp == NULL) return -ENODEV; - if (portp->brdnr < 0 || portp->brdnr >= stli_nrbrds) + if (portp->brdnr >= stli_nrbrds) return 0; brdp = stli_brds[portp->brdnr]; if (brdp == NULL) @@ -1889,11 +1734,11 @@ static int stli_ioctl(struct tty_struct *tty, struct file *file, unsigned int cm * Looks like it is true for the current ttys implementation..!! */ -static void stli_settermios(struct tty_struct *tty, struct termios *old) +static void stli_settermios(struct tty_struct *tty, struct ktermios *old) { - stliport_t *portp; - stlibrd_t *brdp; - struct termios *tiosp; + struct stliport *portp; + struct stlibrd *brdp; + struct ktermios *tiosp; asyport_t aport; if (tty == NULL) @@ -1901,7 +1746,7 @@ static void stli_settermios(struct tty_struct *tty, struct termios *old) portp = tty->driver_data; if (portp == NULL) return; - if (portp->brdnr < 0 || portp->brdnr >= stli_nrbrds) + if (portp->brdnr >= stli_nrbrds) return; brdp = stli_brds[portp->brdnr]; if (brdp == NULL) @@ -1937,7 +1782,7 @@ static void stli_settermios(struct tty_struct *tty, struct termios *old) static void stli_throttle(struct tty_struct *tty) { - stliport_t *portp = tty->driver_data; + struct stliport *portp = tty->driver_data; if (portp == NULL) return; set_bit(ST_RXSTOP, &portp->state); @@ -1953,7 +1798,7 @@ static void stli_throttle(struct tty_struct *tty) static void stli_unthrottle(struct tty_struct *tty) { - stliport_t *portp = tty->driver_data; + struct stliport *portp = tty->driver_data; if (portp == NULL) return; clear_bit(ST_RXSTOP, &portp->state); @@ -1992,7 +1837,7 @@ static void stli_start(struct tty_struct *tty) static void stli_dohangup(struct work_struct *ugly_api) { - stliport_t *portp = container_of(ugly_api, stliport_t, tqhangup); + struct stliport *portp = container_of(ugly_api, struct stliport, tqhangup); if (portp->tty != NULL) { tty_hangup(portp->tty); } @@ -2009,14 +1854,14 @@ static void stli_dohangup(struct work_struct *ugly_api) static void stli_hangup(struct tty_struct *tty) { - stliport_t *portp; - stlibrd_t *brdp; + struct stliport *portp; + struct stlibrd *brdp; unsigned long flags; portp = tty->driver_data; if (portp == NULL) return; - if (portp->brdnr < 0 || portp->brdnr >= stli_nrbrds) + if (portp->brdnr >= stli_nrbrds) return; brdp = stli_brds[portp->brdnr]; if (brdp == NULL) @@ -2062,14 +1907,14 @@ static void stli_hangup(struct tty_struct *tty) static void stli_flushbuffer(struct tty_struct *tty) { - stliport_t *portp; - stlibrd_t *brdp; + struct stliport *portp; + struct stlibrd *brdp; unsigned long ftype, flags; portp = tty->driver_data; if (portp == NULL) return; - if (portp->brdnr < 0 || portp->brdnr >= stli_nrbrds) + if (portp->brdnr >= stli_nrbrds) return; brdp = stli_brds[portp->brdnr]; if (brdp == NULL) @@ -2099,14 +1944,14 @@ static void stli_flushbuffer(struct tty_struct *tty) static void stli_breakctl(struct tty_struct *tty, int state) { - stlibrd_t *brdp; - stliport_t *portp; + struct stlibrd *brdp; + struct stliport *portp; long arg; portp = tty->driver_data; if (portp == NULL) return; - if (portp->brdnr < 0 || portp->brdnr >= stli_nrbrds) + if (portp->brdnr >= stli_nrbrds) return; brdp = stli_brds[portp->brdnr]; if (brdp == NULL) @@ -2120,7 +1965,7 @@ static void stli_breakctl(struct tty_struct *tty, int state) static void stli_waituntilsent(struct tty_struct *tty, int timeout) { - stliport_t *portp; + struct stliport *portp; unsigned long tend; if (tty == NULL) @@ -2146,14 +1991,14 @@ static void stli_waituntilsent(struct tty_struct *tty, int timeout) static void stli_sendxchar(struct tty_struct *tty, char ch) { - stlibrd_t *brdp; - stliport_t *portp; + struct stlibrd *brdp; + struct stliport *portp; asyctrl_t actrl; portp = tty->driver_data; if (portp == NULL) return; - if (portp->brdnr < 0 || portp->brdnr >= stli_nrbrds) + if (portp->brdnr >= stli_nrbrds) return; brdp = stli_brds[portp->brdnr]; if (brdp == NULL) @@ -2181,7 +2026,7 @@ static void stli_sendxchar(struct tty_struct *tty, char ch) * short then padded with spaces). */ -static int stli_portinfo(stlibrd_t *brdp, stliport_t *portp, int portnr, char *pos) +static int stli_portinfo(struct stlibrd *brdp, struct stliport *portp, int portnr, char *pos) { char *sp, *uart; int rc, cnt; @@ -2244,9 +2089,9 @@ static int stli_portinfo(stlibrd_t *brdp, stliport_t *portp, int portnr, char *p static int stli_readproc(char *page, char **start, off_t off, int count, int *eof, void *data) { - stlibrd_t *brdp; - stliport_t *portp; - int brdnr, portnr, totalport; + struct stlibrd *brdp; + struct stliport *portp; + unsigned int brdnr, portnr, totalport; int curoff, maxoff; char *pos; @@ -2316,7 +2161,7 @@ stli_readdone: * entry point) */ -static void __stli_sendcmd(stlibrd_t *brdp, stliport_t *portp, unsigned long cmd, void *arg, int size, int copyback) +static void __stli_sendcmd(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback) { cdkhdr_t __iomem *hdrp; cdkctrl_t __iomem *cp; @@ -2352,7 +2197,7 @@ static void __stli_sendcmd(stlibrd_t *brdp, stliport_t *portp, unsigned long cmd spin_unlock_irqrestore(&brd_lock, flags); } -static void stli_sendcmd(stlibrd_t *brdp, stliport_t *portp, unsigned long cmd, void *arg, int size, int copyback) +static void stli_sendcmd(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback) { unsigned long flags; @@ -2371,7 +2216,7 @@ static void stli_sendcmd(stlibrd_t *brdp, stliport_t *portp, unsigned long cmd, * more chars to unload. */ -static void stli_read(stlibrd_t *brdp, stliport_t *portp) +static void stli_read(struct stlibrd *brdp, struct stliport *portp) { cdkasyrq_t __iomem *rp; char __iomem *shbuf; @@ -2406,7 +2251,7 @@ static void stli_read(stlibrd_t *brdp, stliport_t *portp) while (len > 0) { unsigned char *cptr; - stlen = MIN(len, stlen); + stlen = min(len, stlen); tty_prepare_flip_string(tty, &cptr, stlen); memcpy_fromio(cptr, shbuf + tail, stlen); len -= stlen; @@ -2433,7 +2278,7 @@ static void stli_read(stlibrd_t *brdp, stliport_t *portp) * difficult to deal with them here. */ -static void stli_dodelaycmd(stliport_t *portp, cdkctrl_t __iomem *cp) +static void stli_dodelaycmd(struct stliport *portp, cdkctrl_t __iomem *cp) { int cmd; @@ -2481,7 +2326,7 @@ static void stli_dodelaycmd(stliport_t *portp, cdkctrl_t __iomem *cp) * then port is still busy, otherwise no longer busy. */ -static int stli_hostcmd(stlibrd_t *brdp, stliport_t *portp) +static int stli_hostcmd(struct stlibrd *brdp, struct stliport *portp) { cdkasy_t __iomem *ap; cdkctrl_t __iomem *cp; @@ -2628,9 +2473,9 @@ static int stli_hostcmd(stlibrd_t *brdp, stliport_t *portp) * at the cdk header structure. */ -static void stli_brdpoll(stlibrd_t *brdp, cdkhdr_t __iomem *hdrp) +static void stli_brdpoll(struct stlibrd *brdp, cdkhdr_t __iomem *hdrp) { - stliport_t *portp; + struct stliport *portp; unsigned char hostbits[(STL_MAXCHANS / 8) + 1]; unsigned char slavebits[(STL_MAXCHANS / 8) + 1]; unsigned char __iomem *slavep; @@ -2697,11 +2542,10 @@ static void stli_brdpoll(stlibrd_t *brdp, cdkhdr_t __iomem *hdrp) static void stli_poll(unsigned long arg) { cdkhdr_t __iomem *hdrp; - stlibrd_t *brdp; - int brdnr; + struct stlibrd *brdp; + unsigned int brdnr; - stli_timerlist.expires = STLI_TIMEOUT; - add_timer(&stli_timerlist); + mod_timer(&stli_timerlist, STLI_TIMEOUT); /* * Check each board and do any servicing required. @@ -2730,7 +2574,7 @@ static void stli_poll(unsigned long arg) * the slave. */ -static void stli_mkasyport(stliport_t *portp, asyport_t *pp, struct termios *tiosp) +static void stli_mkasyport(struct stliport *portp, asyport_t *pp, struct ktermios *tiosp) { memset(pp, 0, sizeof(asyport_t)); @@ -2879,13 +2723,13 @@ static long stli_mktiocm(unsigned long sigvalue) * we need to do here is set up the appropriate per port data structures. */ -static int stli_initports(stlibrd_t *brdp) +static int stli_initports(struct stlibrd *brdp) { - stliport_t *portp; - int i, panelnr, panelport; + struct stliport *portp; + unsigned int i, panelnr, panelport; for (i = 0, panelnr = 0, panelport = 0; (i < brdp->nrports); i++) { - portp = kzalloc(sizeof(stliport_t), GFP_KERNEL); + portp = kzalloc(sizeof(struct stliport), GFP_KERNEL); if (!portp) { printk("STALLION: failed to allocate port structure\n"); continue; @@ -2919,7 +2763,7 @@ static int stli_initports(stlibrd_t *brdp) * All the following routines are board specific hardware operations. */ -static void stli_ecpinit(stlibrd_t *brdp) +static void stli_ecpinit(struct stlibrd *brdp) { unsigned long memconf; @@ -2934,21 +2778,21 @@ static void stli_ecpinit(stlibrd_t *brdp) /*****************************************************************************/ -static void stli_ecpenable(stlibrd_t *brdp) +static void stli_ecpenable(struct stlibrd *brdp) { outb(ECP_ATENABLE, (brdp->iobase + ECP_ATCONFR)); } /*****************************************************************************/ -static void stli_ecpdisable(stlibrd_t *brdp) +static void stli_ecpdisable(struct stlibrd *brdp) { outb(ECP_ATDISABLE, (brdp->iobase + ECP_ATCONFR)); } /*****************************************************************************/ -static void __iomem *stli_ecpgetmemptr(stlibrd_t *brdp, unsigned long offset, int line) +static void __iomem *stli_ecpgetmemptr(struct stlibrd *brdp, unsigned long offset, int line) { void __iomem *ptr; unsigned char val; @@ -2969,7 +2813,7 @@ static void __iomem *stli_ecpgetmemptr(stlibrd_t *brdp, unsigned long offset, in /*****************************************************************************/ -static void stli_ecpreset(stlibrd_t *brdp) +static void stli_ecpreset(struct stlibrd *brdp) { outb(ECP_ATSTOP, (brdp->iobase + ECP_ATCONFR)); udelay(10); @@ -2979,7 +2823,7 @@ static void stli_ecpreset(stlibrd_t *brdp) /*****************************************************************************/ -static void stli_ecpintr(stlibrd_t *brdp) +static void stli_ecpintr(struct stlibrd *brdp) { outb(0x1, brdp->iobase); } @@ -2990,7 +2834,7 @@ static void stli_ecpintr(stlibrd_t *brdp) * The following set of functions act on ECP EISA boards. */ -static void stli_ecpeiinit(stlibrd_t *brdp) +static void stli_ecpeiinit(struct stlibrd *brdp) { unsigned long memconf; @@ -3008,21 +2852,21 @@ static void stli_ecpeiinit(stlibrd_t *brdp) /*****************************************************************************/ -static void stli_ecpeienable(stlibrd_t *brdp) +static void stli_ecpeienable(struct stlibrd *brdp) { outb(ECP_EIENABLE, (brdp->iobase + ECP_EICONFR)); } /*****************************************************************************/ -static void stli_ecpeidisable(stlibrd_t *brdp) +static void stli_ecpeidisable(struct stlibrd *brdp) { outb(ECP_EIDISABLE, (brdp->iobase + ECP_EICONFR)); } /*****************************************************************************/ -static void __iomem *stli_ecpeigetmemptr(stlibrd_t *brdp, unsigned long offset, int line) +static void __iomem *stli_ecpeigetmemptr(struct stlibrd *brdp, unsigned long offset, int line) { void __iomem *ptr; unsigned char val; @@ -3046,7 +2890,7 @@ static void __iomem *stli_ecpeigetmemptr(stlibrd_t *brdp, unsigned long offset, /*****************************************************************************/ -static void stli_ecpeireset(stlibrd_t *brdp) +static void stli_ecpeireset(struct stlibrd *brdp) { outb(ECP_EISTOP, (brdp->iobase + ECP_EICONFR)); udelay(10); @@ -3060,21 +2904,21 @@ static void stli_ecpeireset(stlibrd_t *brdp) * The following set of functions act on ECP MCA boards. */ -static void stli_ecpmcenable(stlibrd_t *brdp) +static void stli_ecpmcenable(struct stlibrd *brdp) { outb(ECP_MCENABLE, (brdp->iobase + ECP_MCCONFR)); } /*****************************************************************************/ -static void stli_ecpmcdisable(stlibrd_t *brdp) +static void stli_ecpmcdisable(struct stlibrd *brdp) { outb(ECP_MCDISABLE, (brdp->iobase + ECP_MCCONFR)); } /*****************************************************************************/ -static void __iomem *stli_ecpmcgetmemptr(stlibrd_t *brdp, unsigned long offset, int line) +static void __iomem *stli_ecpmcgetmemptr(struct stlibrd *brdp, unsigned long offset, int line) { void __iomem *ptr; unsigned char val; @@ -3095,7 +2939,7 @@ static void __iomem *stli_ecpmcgetmemptr(stlibrd_t *brdp, unsigned long offset, /*****************************************************************************/ -static void stli_ecpmcreset(stlibrd_t *brdp) +static void stli_ecpmcreset(struct stlibrd *brdp) { outb(ECP_MCSTOP, (brdp->iobase + ECP_MCCONFR)); udelay(10); @@ -3109,7 +2953,7 @@ static void stli_ecpmcreset(stlibrd_t *brdp) * The following set of functions act on ECP PCI boards. */ -static void stli_ecppciinit(stlibrd_t *brdp) +static void stli_ecppciinit(struct stlibrd *brdp) { outb(ECP_PCISTOP, (brdp->iobase + ECP_PCICONFR)); udelay(10); @@ -3119,7 +2963,7 @@ static void stli_ecppciinit(stlibrd_t *brdp) /*****************************************************************************/ -static void __iomem *stli_ecppcigetmemptr(stlibrd_t *brdp, unsigned long offset, int line) +static void __iomem *stli_ecppcigetmemptr(struct stlibrd *brdp, unsigned long offset, int line) { void __iomem *ptr; unsigned char val; @@ -3140,7 +2984,7 @@ static void __iomem *stli_ecppcigetmemptr(stlibrd_t *brdp, unsigned long offset, /*****************************************************************************/ -static void stli_ecppcireset(stlibrd_t *brdp) +static void stli_ecppcireset(struct stlibrd *brdp) { outb(ECP_PCISTOP, (brdp->iobase + ECP_PCICONFR)); udelay(10); @@ -3154,7 +2998,7 @@ static void stli_ecppcireset(stlibrd_t *brdp) * The following routines act on ONboards. */ -static void stli_onbinit(stlibrd_t *brdp) +static void stli_onbinit(struct stlibrd *brdp) { unsigned long memconf; @@ -3171,21 +3015,21 @@ static void stli_onbinit(stlibrd_t *brdp) /*****************************************************************************/ -static void stli_onbenable(stlibrd_t *brdp) +static void stli_onbenable(struct stlibrd *brdp) { outb((brdp->enabval | ONB_ATENABLE), (brdp->iobase + ONB_ATCONFR)); } /*****************************************************************************/ -static void stli_onbdisable(stlibrd_t *brdp) +static void stli_onbdisable(struct stlibrd *brdp) { outb((brdp->enabval | ONB_ATDISABLE), (brdp->iobase + ONB_ATCONFR)); } /*****************************************************************************/ -static void __iomem *stli_onbgetmemptr(stlibrd_t *brdp, unsigned long offset, int line) +static void __iomem *stli_onbgetmemptr(struct stlibrd *brdp, unsigned long offset, int line) { void __iomem *ptr; @@ -3202,7 +3046,7 @@ static void __iomem *stli_onbgetmemptr(stlibrd_t *brdp, unsigned long offset, in /*****************************************************************************/ -static void stli_onbreset(stlibrd_t *brdp) +static void stli_onbreset(struct stlibrd *brdp) { outb(ONB_ATSTOP, (brdp->iobase + ONB_ATCONFR)); udelay(10); @@ -3216,7 +3060,7 @@ static void stli_onbreset(stlibrd_t *brdp) * The following routines act on ONboard EISA. */ -static void stli_onbeinit(stlibrd_t *brdp) +static void stli_onbeinit(struct stlibrd *brdp) { unsigned long memconf; @@ -3236,21 +3080,21 @@ static void stli_onbeinit(stlibrd_t *brdp) /*****************************************************************************/ -static void stli_onbeenable(stlibrd_t *brdp) +static void stli_onbeenable(struct stlibrd *brdp) { outb(ONB_EIENABLE, (brdp->iobase + ONB_EICONFR)); } /*****************************************************************************/ -static void stli_onbedisable(stlibrd_t *brdp) +static void stli_onbedisable(struct stlibrd *brdp) { outb(ONB_EIDISABLE, (brdp->iobase + ONB_EICONFR)); } /*****************************************************************************/ -static void __iomem *stli_onbegetmemptr(stlibrd_t *brdp, unsigned long offset, int line) +static void __iomem *stli_onbegetmemptr(struct stlibrd *brdp, unsigned long offset, int line) { void __iomem *ptr; unsigned char val; @@ -3274,7 +3118,7 @@ static void __iomem *stli_onbegetmemptr(stlibrd_t *brdp, unsigned long offset, i /*****************************************************************************/ -static void stli_onbereset(stlibrd_t *brdp) +static void stli_onbereset(struct stlibrd *brdp) { outb(ONB_EISTOP, (brdp->iobase + ONB_EICONFR)); udelay(10); @@ -3288,7 +3132,7 @@ static void stli_onbereset(stlibrd_t *brdp) * The following routines act on Brumby boards. */ -static void stli_bbyinit(stlibrd_t *brdp) +static void stli_bbyinit(struct stlibrd *brdp) { outb(BBY_ATSTOP, (brdp->iobase + BBY_ATCONFR)); udelay(10); @@ -3300,7 +3144,7 @@ static void stli_bbyinit(stlibrd_t *brdp) /*****************************************************************************/ -static void __iomem *stli_bbygetmemptr(stlibrd_t *brdp, unsigned long offset, int line) +static void __iomem *stli_bbygetmemptr(struct stlibrd *brdp, unsigned long offset, int line) { void __iomem *ptr; unsigned char val; @@ -3315,7 +3159,7 @@ static void __iomem *stli_bbygetmemptr(stlibrd_t *brdp, unsigned long offset, in /*****************************************************************************/ -static void stli_bbyreset(stlibrd_t *brdp) +static void stli_bbyreset(struct stlibrd *brdp) { outb(BBY_ATSTOP, (brdp->iobase + BBY_ATCONFR)); udelay(10); @@ -3329,7 +3173,7 @@ static void stli_bbyreset(stlibrd_t *brdp) * The following routines act on original old Stallion boards. */ -static void stli_stalinit(stlibrd_t *brdp) +static void stli_stalinit(struct stlibrd *brdp) { outb(0x1, brdp->iobase); mdelay(1000); @@ -3337,7 +3181,7 @@ static void stli_stalinit(stlibrd_t *brdp) /*****************************************************************************/ -static void __iomem *stli_stalgetmemptr(stlibrd_t *brdp, unsigned long offset, int line) +static void __iomem *stli_stalgetmemptr(struct stlibrd *brdp, unsigned long offset, int line) { BUG_ON(offset > brdp->memsize); return brdp->membase + (offset % STAL_PAGESIZE); @@ -3345,7 +3189,7 @@ static void __iomem *stli_stalgetmemptr(stlibrd_t *brdp, unsigned long offset, i /*****************************************************************************/ -static void stli_stalreset(stlibrd_t *brdp) +static void stli_stalreset(struct stlibrd *brdp) { u32 __iomem *vecp; @@ -3362,21 +3206,22 @@ static void stli_stalreset(stlibrd_t *brdp) * board types. */ -static int stli_initecp(stlibrd_t *brdp) +static int stli_initecp(struct stlibrd *brdp) { cdkecpsig_t sig; cdkecpsig_t __iomem *sigsp; unsigned int status, nxtid; char *name; - int panelnr, nrports; + int retval, panelnr, nrports; - if (!request_region(brdp->iobase, brdp->iosize, "istallion")) - return -EIO; - - if ((brdp->iobase == 0) || (brdp->memaddr == 0)) - { - release_region(brdp->iobase, brdp->iosize); - return -ENODEV; + if ((brdp->iobase == 0) || (brdp->memaddr == 0)) { + retval = -ENODEV; + goto err; + } + + if (!request_region(brdp->iobase, brdp->iosize, "istallion")) { + retval = -EIO; + goto err; } brdp->iosize = ECP_IOSIZE; @@ -3388,7 +3233,6 @@ static int stli_initecp(stlibrd_t *brdp) */ switch (brdp->brdtype) { case BRD_ECP: - brdp->membase = (void *) brdp->memaddr; brdp->memsize = ECP_MEMSIZE; brdp->pagesize = ECP_ATPAGESIZE; brdp->init = stli_ecpinit; @@ -3402,7 +3246,6 @@ static int stli_initecp(stlibrd_t *brdp) break; case BRD_ECPE: - brdp->membase = (void *) brdp->memaddr; brdp->memsize = ECP_MEMSIZE; brdp->pagesize = ECP_EIPAGESIZE; brdp->init = stli_ecpeiinit; @@ -3416,7 +3259,6 @@ static int stli_initecp(stlibrd_t *brdp) break; case BRD_ECPMC: - brdp->membase = (void *) brdp->memaddr; brdp->memsize = ECP_MEMSIZE; brdp->pagesize = ECP_MCPAGESIZE; brdp->init = NULL; @@ -3430,7 +3272,6 @@ static int stli_initecp(stlibrd_t *brdp) break; case BRD_ECPPCI: - brdp->membase = (void *) brdp->memaddr; brdp->memsize = ECP_PCIMEMSIZE; brdp->pagesize = ECP_PCIPAGESIZE; brdp->init = stli_ecppciinit; @@ -3444,8 +3285,8 @@ static int stli_initecp(stlibrd_t *brdp) break; default: - release_region(brdp->iobase, brdp->iosize); - return -EINVAL; + retval = -EINVAL; + goto err_reg; } /* @@ -3457,10 +3298,9 @@ static int stli_initecp(stlibrd_t *brdp) EBRDINIT(brdp); brdp->membase = ioremap(brdp->memaddr, brdp->memsize); - if (brdp->membase == NULL) - { - release_region(brdp->iobase, brdp->iosize); - return -ENOMEM; + if (brdp->membase == NULL) { + retval = -ENOMEM; + goto err_reg; } /* @@ -3473,12 +3313,9 @@ static int stli_initecp(stlibrd_t *brdp) memcpy_fromio(&sig, sigsp, sizeof(cdkecpsig_t)); EBRDDISABLE(brdp); - if (sig.magic != cpu_to_le32(ECP_MAGIC)) - { - release_region(brdp->iobase, brdp->iosize); - iounmap(brdp->membase); - brdp->membase = NULL; - return -ENODEV; + if (sig.magic != cpu_to_le32(ECP_MAGIC)) { + retval = -ENODEV; + goto err_unmap; } /* @@ -3503,6 +3340,13 @@ static int stli_initecp(stlibrd_t *brdp) brdp->state |= BST_FOUND; return 0; +err_unmap: + iounmap(brdp->membase); + brdp->membase = NULL; +err_reg: + release_region(brdp->iobase, brdp->iosize); +err: + return retval; } /*****************************************************************************/ @@ -3512,23 +3356,27 @@ static int stli_initecp(stlibrd_t *brdp) * This handles only these board types. */ -static int stli_initonb(stlibrd_t *brdp) +static int stli_initonb(struct stlibrd *brdp) { cdkonbsig_t sig; cdkonbsig_t __iomem *sigsp; char *name; - int i; + int i, retval; /* * Do a basic sanity check on the IO and memory addresses. */ - if (brdp->iobase == 0 || brdp->memaddr == 0) - return -ENODEV; + if (brdp->iobase == 0 || brdp->memaddr == 0) { + retval = -ENODEV; + goto err; + } brdp->iosize = ONB_IOSIZE; - if (!request_region(brdp->iobase, brdp->iosize, "istallion")) - return -EIO; + if (!request_region(brdp->iobase, brdp->iosize, "istallion")) { + retval = -EIO; + goto err; + } /* * Based on the specific board type setup the common vars to access @@ -3537,10 +3385,7 @@ static int stli_initonb(stlibrd_t *brdp) */ switch (brdp->brdtype) { case BRD_ONBOARD: - case BRD_ONBOARD32: case BRD_ONBOARD2: - case BRD_ONBOARD2_32: - case BRD_ONBOARDRS: brdp->memsize = ONB_MEMSIZE; brdp->pagesize = ONB_ATPAGESIZE; brdp->init = stli_onbinit; @@ -3571,8 +3416,6 @@ static int stli_initonb(stlibrd_t *brdp) break; case BRD_BRUMBY4: - case BRD_BRUMBY8: - case BRD_BRUMBY16: brdp->memsize = BBY_MEMSIZE; brdp->pagesize = BBY_PAGESIZE; brdp->init = stli_bbyinit; @@ -3599,8 +3442,8 @@ static int stli_initonb(stlibrd_t *brdp) break; default: - release_region(brdp->iobase, brdp->iosize); - return -EINVAL; + retval = -EINVAL; + goto err_reg; } /* @@ -3612,10 +3455,9 @@ static int stli_initonb(stlibrd_t *brdp) EBRDINIT(brdp); brdp->membase = ioremap(brdp->memaddr, brdp->memsize); - if (brdp->membase == NULL) - { - release_region(brdp->iobase, brdp->iosize); - return -ENOMEM; + if (brdp->membase == NULL) { + retval = -ENOMEM; + goto err_reg; } /* @@ -3631,12 +3473,9 @@ static int stli_initonb(stlibrd_t *brdp) if (sig.magic0 != cpu_to_le16(ONB_MAGIC0) || sig.magic1 != cpu_to_le16(ONB_MAGIC1) || sig.magic2 != cpu_to_le16(ONB_MAGIC2) || - sig.magic3 != cpu_to_le16(ONB_MAGIC3)) - { - release_region(brdp->iobase, brdp->iosize); - iounmap(brdp->membase); - brdp->membase = NULL; - return -ENODEV; + sig.magic3 != cpu_to_le16(ONB_MAGIC3)) { + retval = -ENODEV; + goto err_unmap; } /* @@ -3658,6 +3497,13 @@ static int stli_initonb(stlibrd_t *brdp) brdp->state |= BST_FOUND; return 0; +err_unmap: + iounmap(brdp->membase); + brdp->membase = NULL; +err_reg: + release_region(brdp->iobase, brdp->iosize); +err: + return retval; } /*****************************************************************************/ @@ -3668,14 +3514,15 @@ static int stli_initonb(stlibrd_t *brdp) * read in the memory map, and get the show on the road... */ -static int stli_startbrd(stlibrd_t *brdp) +static int stli_startbrd(struct stlibrd *brdp) { cdkhdr_t __iomem *hdrp; cdkmem_t __iomem *memp; cdkasy_t __iomem *ap; unsigned long flags; - stliport_t *portp; - int portnr, nrdevs, i, rc = 0; + unsigned int portnr, nrdevs, i; + struct stliport *portp; + int rc = 0; u32 memoff; spin_lock_irqsave(&brd_lock, flags); @@ -3762,8 +3609,7 @@ stli_donestartup: if (! stli_timeron) { stli_timeron++; - stli_timerlist.expires = STLI_TIMEOUT; - add_timer(&stli_timerlist); + mod_timer(&stli_timerlist, STLI_TIMEOUT); } return rc; @@ -3775,49 +3621,32 @@ stli_donestartup: * Probe and initialize the specified board. */ -static int __init stli_brdinit(stlibrd_t *brdp) +static int __devinit stli_brdinit(struct stlibrd *brdp) { - stli_brds[brdp->brdnr] = brdp; + int retval; switch (brdp->brdtype) { case BRD_ECP: case BRD_ECPE: case BRD_ECPMC: case BRD_ECPPCI: - stli_initecp(brdp); + retval = stli_initecp(brdp); break; case BRD_ONBOARD: case BRD_ONBOARDE: case BRD_ONBOARD2: - case BRD_ONBOARD32: - case BRD_ONBOARD2_32: - case BRD_ONBOARDRS: case BRD_BRUMBY4: - case BRD_BRUMBY8: - case BRD_BRUMBY16: case BRD_STALLION: - stli_initonb(brdp); + retval = stli_initonb(brdp); break; - case BRD_EASYIO: - case BRD_ECH: - case BRD_ECHMC: - case BRD_ECHPCI: - printk(KERN_ERR "STALLION: %s board type not supported in " - "this driver\n", stli_brdnames[brdp->brdtype]); - return -ENODEV; default: printk(KERN_ERR "STALLION: board=%d is unknown board " "type=%d\n", brdp->brdnr, brdp->brdtype); - return -ENODEV; + retval = -ENODEV; } - if ((brdp->state & BST_FOUND) == 0) { - printk(KERN_ERR "STALLION: %s board not found, board=%d " - "io=%x mem=%x\n", - stli_brdnames[brdp->brdtype], brdp->brdnr, - brdp->iobase, (int) brdp->memaddr); - return -ENODEV; - } + if (retval) + return retval; stli_initports(brdp); printk(KERN_INFO "STALLION: %s found, board=%d io=%x mem=%x " @@ -3827,6 +3656,7 @@ static int __init stli_brdinit(stlibrd_t *brdp) return 0; } +#if STLI_EISAPROBE != 0 /*****************************************************************************/ /* @@ -3834,7 +3664,7 @@ static int __init stli_brdinit(stlibrd_t *brdp) * might be. This is a bit if hack, but it is the best we can do. */ -static int stli_eisamemprobe(stlibrd_t *brdp) +static int stli_eisamemprobe(struct stlibrd *brdp) { cdkecpsig_t ecpsig, __iomem *ecpsigp; cdkonbsig_t onbsig, __iomem *onbsigp; @@ -3920,10 +3750,11 @@ static int stli_eisamemprobe(stlibrd_t *brdp) } return 0; } +#endif static int stli_getbrdnr(void) { - int i; + unsigned int i; for (i = 0; i < STL_MAXBRDS; i++) { if (!stli_brds[i]) { @@ -3935,6 +3766,7 @@ static int stli_getbrdnr(void) return -1; } +#if STLI_EISAPROBE != 0 /*****************************************************************************/ /* @@ -3949,9 +3781,9 @@ static int stli_getbrdnr(void) static int stli_findeisabrds(void) { - stlibrd_t *brdp; - unsigned int iobase, eid; - int i; + struct stlibrd *brdp; + unsigned int iobase, eid, i; + int brdnr, found = 0; /* * Firstly check if this is an EISA system. If this is not an EISA system then @@ -3989,9 +3821,11 @@ static int stli_findeisabrds(void) * Allocate a board structure and initialize it. */ if ((brdp = stli_allocbrd()) == NULL) - return -ENOMEM; - if ((brdp->brdnr = stli_getbrdnr()) < 0) - return -ENOMEM; + return found ? : -ENOMEM; + brdnr = stli_getbrdnr(); + if (brdnr < 0) + return found ? : -ENOMEM; + brdp->brdnr = (unsigned int)brdnr; eid = inb(iobase + 0xc82); if (eid == ECP_EISAID) brdp->brdtype = BRD_ECPE; @@ -4003,11 +3837,24 @@ static int stli_findeisabrds(void) outb(0x1, (iobase + 0xc84)); if (stli_eisamemprobe(brdp)) outb(0, (iobase + 0xc84)); - stli_brdinit(brdp); + if (stli_brdinit(brdp) < 0) { + kfree(brdp); + continue; + } + + stli_brds[brdp->brdnr] = brdp; + found++; + + for (i = 0; i < brdp->nrports; i++) + tty_register_device(stli_serial, + brdp->brdnr * STL_MAXPORTS + i, NULL); } - return 0; + return found; } +#else +static inline int stli_findeisabrds(void) { return 0; } +#endif /*****************************************************************************/ @@ -4017,72 +3864,104 @@ static int stli_findeisabrds(void) /*****************************************************************************/ -#ifdef CONFIG_PCI - /* * We have a Stallion board. Allocate a board structure and * initialize it. Read its IO and MEMORY resources from PCI * configuration space. */ -static int stli_initpcibrd(int brdtype, struct pci_dev *devp) +static int __devinit stli_pciprobe(struct pci_dev *pdev, + const struct pci_device_id *ent) { - stlibrd_t *brdp; - - if (pci_enable_device(devp)) - return -EIO; - if ((brdp = stli_allocbrd()) == NULL) - return -ENOMEM; - if ((brdp->brdnr = stli_getbrdnr()) < 0) { + struct stlibrd *brdp; + unsigned int i; + int brdnr, retval = -EIO; + + retval = pci_enable_device(pdev); + if (retval) + goto err; + brdp = stli_allocbrd(); + if (brdp == NULL) { + retval = -ENOMEM; + goto err; + } + mutex_lock(&stli_brdslock); + brdnr = stli_getbrdnr(); + if (brdnr < 0) { printk(KERN_INFO "STALLION: too many boards found, " "maximum supported %d\n", STL_MAXBRDS); - return 0; + mutex_unlock(&stli_brdslock); + retval = -EIO; + goto err_fr; } - brdp->brdtype = brdtype; + brdp->brdnr = (unsigned int)brdnr; + stli_brds[brdp->brdnr] = brdp; + mutex_unlock(&stli_brdslock); + brdp->brdtype = BRD_ECPPCI; /* * We have all resources from the board, so lets setup the actual * board structure now. */ - brdp->iobase = pci_resource_start(devp, 3); - brdp->memaddr = pci_resource_start(devp, 2); - stli_brdinit(brdp); + brdp->iobase = pci_resource_start(pdev, 3); + brdp->memaddr = pci_resource_start(pdev, 2); + retval = stli_brdinit(brdp); + if (retval) + goto err_null; + + brdp->state |= BST_PROBED; + pci_set_drvdata(pdev, brdp); + + EBRDENABLE(brdp); + brdp->enable = NULL; + brdp->disable = NULL; + + for (i = 0; i < brdp->nrports; i++) + tty_register_device(stli_serial, brdp->brdnr * STL_MAXPORTS + i, + &pdev->dev); return 0; +err_null: + stli_brds[brdp->brdnr] = NULL; +err_fr: + kfree(brdp); +err: + return retval; } -/*****************************************************************************/ +static void stli_pciremove(struct pci_dev *pdev) +{ + struct stlibrd *brdp = pci_get_drvdata(pdev); -/* - * Find all Stallion PCI boards that might be installed. Initialize each - * one as it is found. - */ + stli_cleanup_ports(brdp); -static int stli_findpcibrds(void) -{ - struct pci_dev *dev = NULL; + iounmap(brdp->membase); + if (brdp->iosize > 0) + release_region(brdp->iobase, brdp->iosize); - while ((dev = pci_get_device(PCI_VENDOR_ID_STALLION, PCI_DEVICE_ID_ECRA, dev))) { - stli_initpcibrd(BRD_ECPPCI, dev); - } - return 0; + stli_brds[brdp->brdnr] = NULL; + kfree(brdp); } -#endif - +static struct pci_driver stli_pcidriver = { + .name = "istallion", + .id_table = istallion_pci_tbl, + .probe = stli_pciprobe, + .remove = __devexit_p(stli_pciremove) +}; /*****************************************************************************/ /* * Allocate a new board structure. Fill out the basic info in it. */ -static stlibrd_t *stli_allocbrd(void) +static struct stlibrd *stli_allocbrd(void) { - stlibrd_t *brdp; + struct stlibrd *brdp; - brdp = kzalloc(sizeof(stlibrd_t), GFP_KERNEL); + brdp = kzalloc(sizeof(struct stlibrd), GFP_KERNEL); if (!brdp) { printk(KERN_ERR "STALLION: failed to allocate memory " - "(size=%Zd)\n", sizeof(stlibrd_t)); + "(size=%Zd)\n", sizeof(struct stlibrd)); return NULL; } brdp->magic = STLI_BOARDMAGIC; @@ -4098,43 +3977,37 @@ static stlibrd_t *stli_allocbrd(void) static int stli_initbrds(void) { - stlibrd_t *brdp, *nxtbrdp; - stlconf_t *confp; - int i, j; - - if (stli_nrbrds > STL_MAXBRDS) { - printk(KERN_INFO "STALLION: too many boards in configuration " - "table, truncating to %d\n", STL_MAXBRDS); - stli_nrbrds = STL_MAXBRDS; - } + struct stlibrd *brdp, *nxtbrdp; + struct stlconf conf; + unsigned int i, j, found = 0; + int retval; -/* - * Firstly scan the list of static boards configured. Allocate - * resources and initialize the boards as found. If this is a - * module then let the module args override static configuration. - */ - for (i = 0; (i < stli_nrbrds); i++) { - confp = &stli_brdconf[i]; - stli_parsebrd(confp, stli_brdsp[i]); + for (stli_nrbrds = 0; stli_nrbrds < ARRAY_SIZE(stli_brdsp); + stli_nrbrds++) { + memset(&conf, 0, sizeof(conf)); + if (stli_parsebrd(&conf, stli_brdsp[stli_nrbrds]) == 0) + continue; if ((brdp = stli_allocbrd()) == NULL) - return -ENOMEM; - brdp->brdnr = i; - brdp->brdtype = confp->brdtype; - brdp->iobase = confp->ioaddr1; - brdp->memaddr = confp->memaddr; - stli_brdinit(brdp); + continue; + brdp->brdnr = stli_nrbrds; + brdp->brdtype = conf.brdtype; + brdp->iobase = conf.ioaddr1; + brdp->memaddr = conf.memaddr; + if (stli_brdinit(brdp) < 0) { + kfree(brdp); + continue; + } + stli_brds[brdp->brdnr] = brdp; + found++; + + for (i = 0; i < brdp->nrports; i++) + tty_register_device(stli_serial, + brdp->brdnr * STL_MAXPORTS + i, NULL); } -/* - * Static configuration table done, so now use dynamic methods to - * see if any more boards should be configured. - */ - stli_argbrds(); - if (STLI_EISAPROBE) - stli_findeisabrds(); -#ifdef CONFIG_PCI - stli_findpcibrds(); -#endif + retval = stli_findeisabrds(); + if (retval > 0) + found += retval; /* * All found boards are initialized. Now for a little optimization, if @@ -4174,7 +4047,16 @@ static int stli_initbrds(void) } } + retval = pci_register_driver(&stli_pcidriver); + if (retval && found == 0) { + printk(KERN_ERR "Neither isa nor eisa cards found nor pci " + "driver can be registered!\n"); + goto err; + } + return 0; +err: + return retval; } /*****************************************************************************/ @@ -4189,12 +4071,13 @@ static ssize_t stli_memread(struct file *fp, char __user *buf, size_t count, lof { unsigned long flags; void __iomem *memptr; - stlibrd_t *brdp; - int brdnr, size, n; + struct stlibrd *brdp; + unsigned int brdnr; + int size, n; void *p; loff_t off = *offp; - brdnr = iminor(fp->f_dentry->d_inode); + brdnr = iminor(fp->f_path.dentry->d_inode); if (brdnr >= stli_nrbrds) return -ENODEV; brdp = stli_brds[brdnr]; @@ -4205,7 +4088,7 @@ static ssize_t stli_memread(struct file *fp, char __user *buf, size_t count, lof if (off >= brdp->memsize || off + count < off) return 0; - size = MIN(count, (brdp->memsize - off)); + size = min(count, (size_t)(brdp->memsize - off)); /* * Copy the data a page at a time @@ -4219,8 +4102,8 @@ static ssize_t stli_memread(struct file *fp, char __user *buf, size_t count, lof spin_lock_irqsave(&brd_lock, flags); EBRDENABLE(brdp); memptr = EBRDGETMEMPTR(brdp, off); - n = MIN(size, (brdp->pagesize - (((unsigned long) off) % brdp->pagesize))); - n = MIN(n, PAGE_SIZE); + n = min(size, (int)(brdp->pagesize - (((unsigned long) off) % brdp->pagesize))); + n = min(n, (int)PAGE_SIZE); memcpy_fromio(p, memptr, n); EBRDDISABLE(brdp); spin_unlock_irqrestore(&brd_lock, flags); @@ -4252,13 +4135,14 @@ static ssize_t stli_memwrite(struct file *fp, const char __user *buf, size_t cou { unsigned long flags; void __iomem *memptr; - stlibrd_t *brdp; + struct stlibrd *brdp; char __user *chbuf; - int brdnr, size, n; + unsigned int brdnr; + int size, n; void *p; loff_t off = *offp; - brdnr = iminor(fp->f_dentry->d_inode); + brdnr = iminor(fp->f_path.dentry->d_inode); if (brdnr >= stli_nrbrds) return -ENODEV; @@ -4271,7 +4155,7 @@ static ssize_t stli_memwrite(struct file *fp, const char __user *buf, size_t cou return 0; chbuf = (char __user *) buf; - size = MIN(count, (brdp->memsize - off)); + size = min(count, (size_t)(brdp->memsize - off)); /* * Copy the data a page at a time @@ -4282,8 +4166,8 @@ static ssize_t stli_memwrite(struct file *fp, const char __user *buf, size_t cou return -ENOMEM; while (size > 0) { - n = MIN(size, (brdp->pagesize - (((unsigned long) off) % brdp->pagesize))); - n = MIN(n, PAGE_SIZE); + n = min(size, (int)(brdp->pagesize - (((unsigned long) off) % brdp->pagesize))); + n = min(n, (int)PAGE_SIZE); if (copy_from_user(p, chbuf, n)) { if (count == 0) count = -EFAULT; @@ -4313,8 +4197,8 @@ out: static int stli_getbrdstats(combrd_t __user *bp) { - stlibrd_t *brdp; - int i; + struct stlibrd *brdp; + unsigned int i; if (copy_from_user(&stli_brdstats, bp, sizeof(combrd_t))) return -EFAULT; @@ -4350,19 +4234,20 @@ static int stli_getbrdstats(combrd_t __user *bp) * Resolve the referenced port number into a port struct pointer. */ -static stliport_t *stli_getport(int brdnr, int panelnr, int portnr) +static struct stliport *stli_getport(unsigned int brdnr, unsigned int panelnr, + unsigned int portnr) { - stlibrd_t *brdp; - int i; + struct stlibrd *brdp; + unsigned int i; - if (brdnr < 0 || brdnr >= STL_MAXBRDS) + if (brdnr >= STL_MAXBRDS) return NULL; brdp = stli_brds[brdnr]; if (brdp == NULL) return NULL; for (i = 0; (i < panelnr); i++) portnr += brdp->panels[i]; - if ((portnr < 0) || (portnr >= brdp->nrports)) + if (portnr >= brdp->nrports) return NULL; return brdp->ports[portnr]; } @@ -4375,10 +4260,10 @@ static stliport_t *stli_getport(int brdnr, int panelnr, int portnr) * what port to get stats for (used through board control device). */ -static int stli_portcmdstats(stliport_t *portp) +static int stli_portcmdstats(struct stliport *portp) { unsigned long flags; - stlibrd_t *brdp; + struct stlibrd *brdp; int rc; memset(&stli_comstats, 0, sizeof(comstats_t)); @@ -4449,9 +4334,9 @@ static int stli_portcmdstats(stliport_t *portp) * what port to get stats for (used through board control device). */ -static int stli_getportstats(stliport_t *portp, comstats_t __user *cp) +static int stli_getportstats(struct stliport *portp, comstats_t __user *cp) { - stlibrd_t *brdp; + struct stlibrd *brdp; int rc; if (!portp) { @@ -4480,9 +4365,9 @@ static int stli_getportstats(stliport_t *portp, comstats_t __user *cp) * Clear the port stats structure. We also return it zeroed out... */ -static int stli_clrportstats(stliport_t *portp, comstats_t __user *cp) +static int stli_clrportstats(struct stliport *portp, comstats_t __user *cp) { - stlibrd_t *brdp; + struct stlibrd *brdp; int rc; if (!portp) { @@ -4519,17 +4404,18 @@ static int stli_clrportstats(stliport_t *portp, comstats_t __user *cp) * Return the entire driver ports structure to a user app. */ -static int stli_getportstruct(stliport_t __user *arg) +static int stli_getportstruct(struct stliport __user *arg) { - stliport_t *portp; + struct stliport stli_dummyport; + struct stliport *portp; - if (copy_from_user(&stli_dummyport, arg, sizeof(stliport_t))) + if (copy_from_user(&stli_dummyport, arg, sizeof(struct stliport))) return -EFAULT; portp = stli_getport(stli_dummyport.brdnr, stli_dummyport.panelnr, stli_dummyport.portnr); if (!portp) return -ENODEV; - if (copy_to_user(arg, portp, sizeof(stliport_t))) + if (copy_to_user(arg, portp, sizeof(struct stliport))) return -EFAULT; return 0; } @@ -4540,18 +4426,19 @@ static int stli_getportstruct(stliport_t __user *arg) * Return the entire driver board structure to a user app. */ -static int stli_getbrdstruct(stlibrd_t __user *arg) +static int stli_getbrdstruct(struct stlibrd __user *arg) { - stlibrd_t *brdp; + struct stlibrd stli_dummybrd; + struct stlibrd *brdp; - if (copy_from_user(&stli_dummybrd, arg, sizeof(stlibrd_t))) + if (copy_from_user(&stli_dummybrd, arg, sizeof(struct stlibrd))) return -EFAULT; - if ((stli_dummybrd.brdnr < 0) || (stli_dummybrd.brdnr >= STL_MAXBRDS)) + if (stli_dummybrd.brdnr >= STL_MAXBRDS) return -ENODEV; brdp = stli_brds[stli_dummybrd.brdnr]; if (!brdp) return -ENODEV; - if (copy_to_user(arg, brdp, sizeof(stlibrd_t))) + if (copy_to_user(arg, brdp, sizeof(struct stlibrd))) return -EFAULT; return 0; } @@ -4566,7 +4453,7 @@ static int stli_getbrdstruct(stlibrd_t __user *arg) static int stli_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, unsigned long arg) { - stlibrd_t *brdp; + struct stlibrd *brdp; int brdnr, rc, done; void __user *argp = (void __user *)arg; @@ -4665,46 +4552,53 @@ static const struct tty_operations stli_ops = { }; /*****************************************************************************/ +/* + * Loadable module initialization stuff. + */ + +static void istallion_cleanup_isa(void) +{ + struct stlibrd *brdp; + unsigned int j; + + for (j = 0; (j < stli_nrbrds); j++) { + if ((brdp = stli_brds[j]) == NULL || (brdp->state & BST_PROBED)) + continue; + + stli_cleanup_ports(brdp); -static int __init stli_init(void) + iounmap(brdp->membase); + if (brdp->iosize > 0) + release_region(brdp->iobase, brdp->iosize); + kfree(brdp); + stli_brds[j] = NULL; + } +} + +static int __init istallion_module_init(void) { - int i; + unsigned int i; + int retval; + printk(KERN_INFO "%s: version %s\n", stli_drvtitle, stli_drvversion); spin_lock_init(&stli_lock); spin_lock_init(&brd_lock); - stli_initbrds(); - - stli_serial = alloc_tty_driver(STL_MAXBRDS * STL_MAXPORTS); - if (!stli_serial) - return -ENOMEM; - -/* - * Allocate a temporary write buffer. - */ stli_txcookbuf = kmalloc(STLI_TXBUFSIZE, GFP_KERNEL); - if (!stli_txcookbuf) + if (!stli_txcookbuf) { printk(KERN_ERR "STALLION: failed to allocate memory " "(size=%d)\n", STLI_TXBUFSIZE); + retval = -ENOMEM; + goto err; + } -/* - * Set up a character driver for the shared memory region. We need this - * to down load the slave code image. Also it is a useful debugging tool. - */ - if (register_chrdev(STL_SIOMEMMAJOR, "staliomem", &stli_fsiomem)) - printk(KERN_ERR "STALLION: failed to register serial memory " - "device\n"); - - istallion_class = class_create(THIS_MODULE, "staliomem"); - for (i = 0; i < 4; i++) - class_device_create(istallion_class, NULL, - MKDEV(STL_SIOMEMMAJOR, i), - NULL, "staliomem%d", i); + stli_serial = alloc_tty_driver(STL_MAXBRDS * STL_MAXPORTS); + if (!stli_serial) { + retval = -ENOMEM; + goto err_free; + } -/* - * Set up the tty driver structure and register us as a driver. - */ stli_serial->owner = THIS_MODULE; stli_serial->driver_name = stli_drvname; stli_serial->name = stli_serialname; @@ -4713,15 +4607,79 @@ static int __init stli_init(void) stli_serial->type = TTY_DRIVER_TYPE_SERIAL; stli_serial->subtype = SERIAL_TYPE_NORMAL; stli_serial->init_termios = stli_deftermios; - stli_serial->flags = TTY_DRIVER_REAL_RAW; + stli_serial->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; tty_set_operations(stli_serial, &stli_ops); - if (tty_register_driver(stli_serial)) { - put_tty_driver(stli_serial); + retval = tty_register_driver(stli_serial); + if (retval) { printk(KERN_ERR "STALLION: failed to register serial driver\n"); - return -EBUSY; + goto err_ttyput; } + + retval = stli_initbrds(); + if (retval) + goto err_ttyunr; + +/* + * Set up a character driver for the shared memory region. We need this + * to down load the slave code image. Also it is a useful debugging tool. + */ + retval = register_chrdev(STL_SIOMEMMAJOR, "staliomem", &stli_fsiomem); + if (retval) { + printk(KERN_ERR "STALLION: failed to register serial memory " + "device\n"); + goto err_deinit; + } + + istallion_class = class_create(THIS_MODULE, "staliomem"); + for (i = 0; i < 4; i++) + class_device_create(istallion_class, NULL, + MKDEV(STL_SIOMEMMAJOR, i), + NULL, "staliomem%d", i); + return 0; +err_deinit: + pci_unregister_driver(&stli_pcidriver); + istallion_cleanup_isa(); +err_ttyunr: + tty_unregister_driver(stli_serial); +err_ttyput: + put_tty_driver(stli_serial); +err_free: + kfree(stli_txcookbuf); +err: + return retval; } /*****************************************************************************/ + +static void __exit istallion_module_exit(void) +{ + unsigned int j; + + printk(KERN_INFO "Unloading %s: version %s\n", stli_drvtitle, + stli_drvversion); + + if (stli_timeron) { + stli_timeron = 0; + del_timer_sync(&stli_timerlist); + } + + unregister_chrdev(STL_SIOMEMMAJOR, "staliomem"); + + for (j = 0; j < 4; j++) + class_device_destroy(istallion_class, MKDEV(STL_SIOMEMMAJOR, + j)); + class_destroy(istallion_class); + + pci_unregister_driver(&stli_pcidriver); + istallion_cleanup_isa(); + + tty_unregister_driver(stli_serial); + put_tty_driver(stli_serial); + + kfree(stli_txcookbuf); +} + +module_init(istallion_module_init); +module_exit(istallion_module_exit); |