diff options
Diffstat (limited to 'drivers/gpu/drm')
-rw-r--r-- | drivers/gpu/drm/gma500/cdv_device.c | 1 | ||||
-rw-r--r-- | drivers/gpu/drm/gma500/cdv_device.h | 1 | ||||
-rw-r--r-- | drivers/gpu/drm/gma500/cdv_intel_display.c | 197 |
3 files changed, 36 insertions, 163 deletions
diff --git a/drivers/gpu/drm/gma500/cdv_device.c b/drivers/gpu/drm/gma500/cdv_device.c index 23e14e9..daa45b5 100644 --- a/drivers/gpu/drm/gma500/cdv_device.c +++ b/drivers/gpu/drm/gma500/cdv_device.c @@ -641,6 +641,7 @@ const struct psb_ops cdv_chip_ops = { .crtc_helper = &cdv_intel_helper_funcs, .crtc_funcs = &cdv_intel_crtc_funcs, + .clock_funcs = &cdv_clock_funcs, .output_init = cdv_output_init, .hotplug = cdv_hotplug_event, diff --git a/drivers/gpu/drm/gma500/cdv_device.h b/drivers/gpu/drm/gma500/cdv_device.h index 9561e17..0fcb608 100644 --- a/drivers/gpu/drm/gma500/cdv_device.h +++ b/drivers/gpu/drm/gma500/cdv_device.h @@ -17,6 +17,7 @@ extern const struct drm_crtc_helper_funcs cdv_intel_helper_funcs; extern const struct drm_crtc_funcs cdv_intel_crtc_funcs; +extern const struct gma_clock_funcs cdv_clock_funcs; extern void cdv_intel_crt_init(struct drm_device *dev, struct psb_intel_mode_device *mode_dev); extern void cdv_intel_lvds_init(struct drm_device *dev, diff --git a/drivers/gpu/drm/gma500/cdv_intel_display.c b/drivers/gpu/drm/gma500/cdv_intel_display.c index 82430ad..82f1ae4 100644 --- a/drivers/gpu/drm/gma500/cdv_intel_display.c +++ b/drivers/gpu/drm/gma500/cdv_intel_display.c @@ -30,43 +30,10 @@ #include "power.h" #include "cdv_device.h" +static bool cdv_intel_find_dp_pll(const struct gma_limit_t *limit, + struct drm_crtc *crtc, int target, + int refclk, struct gma_clock_t *best_clock); -struct cdv_intel_range_t { - int min, max; -}; - -struct cdv_intel_p2_t { - int dot_limit; - int p2_slow, p2_fast; -}; - -struct cdv_intel_clock_t { - /* given values */ - int n; - int m1, m2; - int p1, p2; - /* derived values */ - int dot; - int vco; - int m; - int p; -}; - -#define INTEL_P2_NUM 2 - -struct cdv_intel_limit_t { - struct cdv_intel_range_t dot, vco, n, m, m1, m2, p, p1; - struct cdv_intel_p2_t p2; - bool (*find_pll)(const struct cdv_intel_limit_t *, struct drm_crtc *, - int, int, struct cdv_intel_clock_t *); -}; - -static bool cdv_intel_find_best_PLL(const struct cdv_intel_limit_t *limit, - struct drm_crtc *crtc, int target, int refclk, - struct cdv_intel_clock_t *best_clock); -static bool cdv_intel_find_dp_pll(const struct cdv_intel_limit_t *limit, struct drm_crtc *crtc, int target, - int refclk, - struct cdv_intel_clock_t *best_clock); #define CDV_LIMIT_SINGLE_LVDS_96 0 #define CDV_LIMIT_SINGLE_LVDS_100 1 @@ -75,7 +42,7 @@ static bool cdv_intel_find_dp_pll(const struct cdv_intel_limit_t *limit, struct #define CDV_LIMIT_DP_27 4 #define CDV_LIMIT_DP_100 5 -static const struct cdv_intel_limit_t cdv_intel_limits[] = { +static const struct gma_limit_t cdv_intel_limits[] = { { /* CDV_SINGLE_LVDS_96MHz */ .dot = {.min = 20000, .max = 115500}, .vco = {.min = 1800000, .max = 3600000}, @@ -85,9 +52,8 @@ static const struct cdv_intel_limit_t cdv_intel_limits[] = { .m2 = {.min = 58, .max = 158}, .p = {.min = 28, .max = 140}, .p1 = {.min = 2, .max = 10}, - .p2 = {.dot_limit = 200000, - .p2_slow = 14, .p2_fast = 14}, - .find_pll = cdv_intel_find_best_PLL, + .p2 = {.dot_limit = 200000, .p2_slow = 14, .p2_fast = 14}, + .find_pll = gma_find_best_pll, }, { /* CDV_SINGLE_LVDS_100MHz */ .dot = {.min = 20000, .max = 115500}, @@ -102,7 +68,7 @@ static const struct cdv_intel_limit_t cdv_intel_limits[] = { * is 80-224Mhz. Prefer single channel as much as possible. */ .p2 = {.dot_limit = 200000, .p2_slow = 14, .p2_fast = 14}, - .find_pll = cdv_intel_find_best_PLL, + .find_pll = gma_find_best_pll, }, { /* CDV_DAC_HDMI_27MHz */ .dot = {.min = 20000, .max = 400000}, @@ -114,7 +80,7 @@ static const struct cdv_intel_limit_t cdv_intel_limits[] = { .p = {.min = 5, .max = 90}, .p1 = {.min = 1, .max = 9}, .p2 = {.dot_limit = 225000, .p2_slow = 10, .p2_fast = 5}, - .find_pll = cdv_intel_find_best_PLL, + .find_pll = gma_find_best_pll, }, { /* CDV_DAC_HDMI_96MHz */ .dot = {.min = 20000, .max = 400000}, @@ -126,7 +92,7 @@ static const struct cdv_intel_limit_t cdv_intel_limits[] = { .p = {.min = 5, .max = 100}, .p1 = {.min = 1, .max = 10}, .p2 = {.dot_limit = 225000, .p2_slow = 10, .p2_fast = 5}, - .find_pll = cdv_intel_find_best_PLL, + .find_pll = gma_find_best_pll, }, { /* CDV_DP_27MHz */ .dot = {.min = 160000, .max = 272000}, @@ -255,7 +221,7 @@ void cdv_sb_reset(struct drm_device *dev) */ static int cdv_dpll_set_clock_cdv(struct drm_device *dev, struct drm_crtc *crtc, - struct cdv_intel_clock_t *clock, bool is_lvds, u32 ddi_select) + struct gma_clock_t *clock, bool is_lvds, u32 ddi_select) { struct psb_intel_crtc *psb_crtc = to_psb_intel_crtc(crtc); int pipe = psb_crtc->pipe; @@ -405,31 +371,11 @@ cdv_dpll_set_clock_cdv(struct drm_device *dev, struct drm_crtc *crtc, return 0; } -/* - * Returns whether any encoder on the specified pipe is of the specified type - */ -static bool cdv_intel_pipe_has_type(struct drm_crtc *crtc, int type) +static const struct gma_limit_t *cdv_intel_limit(struct drm_crtc *crtc, + int refclk) { - struct drm_device *dev = crtc->dev; - struct drm_mode_config *mode_config = &dev->mode_config; - struct drm_connector *l_entry; - - list_for_each_entry(l_entry, &mode_config->connector_list, head) { - if (l_entry->encoder && l_entry->encoder->crtc == crtc) { - struct psb_intel_encoder *psb_intel_encoder = - psb_intel_attached_encoder(l_entry); - if (psb_intel_encoder->type == type) - return true; - } - } - return false; -} - -static const struct cdv_intel_limit_t *cdv_intel_limit(struct drm_crtc *crtc, - int refclk) -{ - const struct cdv_intel_limit_t *limit; - if (cdv_intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { + const struct gma_limit_t *limit; + if (psb_intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { /* * Now only single-channel LVDS is supported on CDV. If it is * incorrect, please add the dual-channel LVDS. @@ -454,8 +400,7 @@ static const struct cdv_intel_limit_t *cdv_intel_limit(struct drm_crtc *crtc, } /* m1 is reserved as 0 in CDV, n is a ring counter */ -static void cdv_intel_clock(struct drm_device *dev, - int refclk, struct cdv_intel_clock_t *clock) +static void cdv_intel_clock(int refclk, struct gma_clock_t *clock) { clock->m = clock->m2 + 2; clock->p = clock->p1 * clock->p2; @@ -463,93 +408,12 @@ static void cdv_intel_clock(struct drm_device *dev, clock->dot = clock->vco / clock->p; } - -#define INTELPllInvalid(s) { /* ErrorF (s) */; return false; } -static bool cdv_intel_PLL_is_valid(struct drm_crtc *crtc, - const struct cdv_intel_limit_t *limit, - struct cdv_intel_clock_t *clock) +static bool cdv_intel_find_dp_pll(const struct gma_limit_t *limit, + struct drm_crtc *crtc, int target, + int refclk, + struct gma_clock_t *best_clock) { - if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1) - INTELPllInvalid("p1 out of range\n"); - if (clock->p < limit->p.min || limit->p.max < clock->p) - INTELPllInvalid("p out of range\n"); - /* unnecessary to check the range of m(m1/M2)/n again */ - if (clock->vco < limit->vco.min || limit->vco.max < clock->vco) - INTELPllInvalid("vco out of range\n"); - /* XXX: We may need to be checking "Dot clock" - * depending on the multiplier, connector, etc., - * rather than just a single range. - */ - if (clock->dot < limit->dot.min || limit->dot.max < clock->dot) - INTELPllInvalid("dot out of range\n"); - - return true; -} - -static bool cdv_intel_find_best_PLL(const struct cdv_intel_limit_t *limit, - struct drm_crtc *crtc, int target, int refclk, - struct cdv_intel_clock_t *best_clock) -{ - struct drm_device *dev = crtc->dev; - struct cdv_intel_clock_t clock; - int err = target; - - - if (cdv_intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) && - (REG_READ(LVDS) & LVDS_PORT_EN) != 0) { - /* - * For LVDS, if the panel is on, just rely on its current - * settings for dual-channel. We haven't figured out how to - * reliably set up different single/dual channel state, if we - * even can. - */ - if ((REG_READ(LVDS) & LVDS_CLKB_POWER_MASK) == - LVDS_CLKB_POWER_UP) - clock.p2 = limit->p2.p2_fast; - else - clock.p2 = limit->p2.p2_slow; - } else { - if (target < limit->p2.dot_limit) - clock.p2 = limit->p2.p2_slow; - else - clock.p2 = limit->p2.p2_fast; - } - - memset(best_clock, 0, sizeof(*best_clock)); - clock.m1 = 0; - /* m1 is reserved as 0 in CDV, n is a ring counter. - So skip the m1 loop */ - for (clock.n = limit->n.min; clock.n <= limit->n.max; clock.n++) { - for (clock.m2 = limit->m2.min; clock.m2 <= limit->m2.max; - clock.m2++) { - for (clock.p1 = limit->p1.min; - clock.p1 <= limit->p1.max; - clock.p1++) { - int this_err; - - cdv_intel_clock(dev, refclk, &clock); - - if (!cdv_intel_PLL_is_valid(crtc, - limit, &clock)) - continue; - - this_err = abs(clock.dot - target); - if (this_err < err) { - *best_clock = clock; - err = this_err; - } - } - } - } - - return err != target; -} - -static bool cdv_intel_find_dp_pll(const struct cdv_intel_limit_t *limit, struct drm_crtc *crtc, int target, - int refclk, - struct cdv_intel_clock_t *best_clock) -{ - struct cdv_intel_clock_t clock; + struct gma_clock_t clock; if (refclk == 27000) { if (target < 200000) { clock.p1 = 2; @@ -584,7 +448,7 @@ static bool cdv_intel_find_dp_pll(const struct cdv_intel_limit_t *limit, struct clock.p = clock.p1 * clock.p2; clock.vco = (refclk * clock.m) / clock.n; clock.dot = clock.vco / clock.p; - memcpy(best_clock, &clock, sizeof(struct cdv_intel_clock_t)); + memcpy(best_clock, &clock, sizeof(struct gma_clock_t)); return true; } @@ -1035,14 +899,14 @@ static int cdv_intel_crtc_mode_set(struct drm_crtc *crtc, int pipe = psb_intel_crtc->pipe; const struct psb_offset *map = &dev_priv->regmap[pipe]; int refclk; - struct cdv_intel_clock_t clock; + struct gma_clock_t clock; u32 dpll = 0, dspcntr, pipeconf; bool ok; bool is_crt = false, is_lvds = false, is_tv = false; bool is_hdmi = false, is_dp = false; struct drm_mode_config *mode_config = &dev->mode_config; struct drm_connector *connector; - const struct cdv_intel_limit_t *limit; + const struct gma_limit_t *limit; u32 ddi_select = 0; bool is_edp = false; @@ -1108,12 +972,13 @@ static int cdv_intel_crtc_mode_set(struct drm_crtc *crtc, drm_mode_debug_printmodeline(adjusted_mode); - limit = cdv_intel_limit(crtc, refclk); + limit = psb_intel_crtc->clock_funcs->limit(crtc, refclk); ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, &clock); if (!ok) { - dev_err(dev->dev, "Couldn't find PLL settings for mode!\n"); + DRM_ERROR("Couldn't find PLL settings for mode! target: %d, actual: %d", + adjusted_mode->clock, clock.dot); return 0; } @@ -1612,7 +1477,7 @@ static int cdv_crtc_set_config(struct drm_mode_set *set) /* FIXME: why are we using this, should it be cdv_ in this tree ? */ -static void i8xx_clock(int refclk, struct cdv_intel_clock_t *clock) +static void i8xx_clock(int refclk, struct gma_clock_t *clock) { clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2); clock->p = clock->p1 * clock->p2; @@ -1630,7 +1495,7 @@ static int cdv_intel_crtc_clock_get(struct drm_device *dev, const struct psb_offset *map = &dev_priv->regmap[pipe]; u32 dpll; u32 fp; - struct cdv_intel_clock_t clock; + struct gma_clock_t clock; bool is_lvds; struct psb_pipe *p = &dev_priv->regs.pipe[pipe]; @@ -1788,3 +1653,9 @@ const struct drm_crtc_funcs cdv_intel_crtc_funcs = { .set_config = cdv_crtc_set_config, .destroy = cdv_intel_crtc_destroy, }; + +const struct gma_clock_funcs cdv_clock_funcs = { + .clock = cdv_intel_clock, + .limit = cdv_intel_limit, + .pll_is_valid = gma_pll_is_valid, +}; |