diff options
Diffstat (limited to 'drivers/gpu')
-rw-r--r-- | drivers/gpu/drm/i915/intel_ddi.c | 7 | ||||
-rw-r--r-- | drivers/gpu/drm/i915/intel_display.c | 224 | ||||
-rw-r--r-- | drivers/gpu/drm/i915/intel_hdmi.c | 13 | ||||
-rw-r--r-- | drivers/gpu/drm/i915/intel_lvds.c | 12 |
4 files changed, 100 insertions, 156 deletions
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c index 3d09df0..6c6b012 100644 --- a/drivers/gpu/drm/i915/intel_ddi.c +++ b/drivers/gpu/drm/i915/intel_ddi.c @@ -945,9 +945,7 @@ void intel_ddi_set_pipe_settings(struct drm_crtc *crtc) temp |= TRANS_MSA_12_BPC; break; default: - temp |= TRANS_MSA_8_BPC; - WARN(1, "%d bpp unsupported by DDI function\n", - intel_crtc->config.pipe_bpp); + BUG(); } I915_WRITE(TRANS_MSA_MISC(cpu_transcoder), temp); } @@ -983,8 +981,7 @@ void intel_ddi_enable_transcoder_func(struct drm_crtc *crtc) temp |= TRANS_DDI_BPC_12; break; default: - WARN(1, "%d bpp unsupported by transcoder DDI function\n", - intel_crtc->config.pipe_bpp); + BUG(); } if (crtc->mode.flags & DRM_MODE_FLAG_PVSYNC) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 4cc46ef..1439772 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -4076,142 +4076,6 @@ static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv) && !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE); } -/** - * intel_choose_pipe_bpp_dither - figure out what color depth the pipe should send - * @crtc: CRTC structure - * @mode: requested mode - * - * A pipe may be connected to one or more outputs. Based on the depth of the - * attached framebuffer, choose a good color depth to use on the pipe. - * - * If possible, match the pipe depth to the fb depth. In some cases, this - * isn't ideal, because the connected output supports a lesser or restricted - * set of depths. Resolve that here: - * LVDS typically supports only 6bpc, so clamp down in that case - * HDMI supports only 8bpc or 12bpc, so clamp to 8bpc with dither for 10bpc - * Displays may support a restricted set as well, check EDID and clamp as - * appropriate. - * DP may want to dither down to 6bpc to fit larger modes - * - * RETURNS: - * Dithering requirement (i.e. false if display bpc and pipe bpc match, - * true if they don't match). - */ -static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, - struct drm_framebuffer *fb, - unsigned int *pipe_bpp, - struct drm_display_mode *mode) -{ - struct drm_device *dev = crtc->dev; - struct drm_i915_private *dev_priv = dev->dev_private; - struct drm_connector *connector; - struct intel_encoder *intel_encoder; - unsigned int display_bpc = UINT_MAX, bpc; - - /* Walk the encoders & connectors on this crtc, get min bpc */ - for_each_encoder_on_crtc(dev, crtc, intel_encoder) { - - if (intel_encoder->type == INTEL_OUTPUT_LVDS) { - unsigned int lvds_bpc; - - if ((I915_READ(PCH_LVDS) & LVDS_A3_POWER_MASK) == - LVDS_A3_POWER_UP) - lvds_bpc = 8; - else - lvds_bpc = 6; - - if (lvds_bpc < display_bpc) { - DRM_DEBUG_KMS("clamping display bpc (was %d) to LVDS (%d)\n", display_bpc, lvds_bpc); - display_bpc = lvds_bpc; - } - continue; - } - - /* Not one of the known troublemakers, check the EDID */ - list_for_each_entry(connector, &dev->mode_config.connector_list, - head) { - if (connector->encoder != &intel_encoder->base) - continue; - - /* Don't use an invalid EDID bpc value */ - if (connector->display_info.bpc && - connector->display_info.bpc < display_bpc) { - DRM_DEBUG_KMS("clamping display bpc (was %d) to EDID reported max of %d\n", display_bpc, connector->display_info.bpc); - display_bpc = connector->display_info.bpc; - } - } - - if (intel_encoder->type == INTEL_OUTPUT_EDP) { - /* Use VBT settings if we have an eDP panel */ - unsigned int edp_bpc = dev_priv->edp.bpp / 3; - - if (edp_bpc && edp_bpc < display_bpc) { - DRM_DEBUG_KMS("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc); - display_bpc = edp_bpc; - } - continue; - } - - /* - * HDMI is either 12 or 8, so if the display lets 10bpc sneak - * through, clamp it down. (Note: >12bpc will be caught below.) - */ - if (intel_encoder->type == INTEL_OUTPUT_HDMI) { - if (display_bpc > 8 && display_bpc < 12) { - DRM_DEBUG_KMS("forcing bpc to 12 for HDMI\n"); - display_bpc = 12; - } else { - DRM_DEBUG_KMS("forcing bpc to 8 for HDMI\n"); - display_bpc = 8; - } - } - } - - if (mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) { - DRM_DEBUG_KMS("Dithering DP to 6bpc\n"); - display_bpc = 6; - } - - /* - * We could just drive the pipe at the highest bpc all the time and - * enable dithering as needed, but that costs bandwidth. So choose - * the minimum value that expresses the full color range of the fb but - * also stays within the max display bpc discovered above. - */ - - switch (fb->depth) { - case 8: - bpc = 8; /* since we go through a colormap */ - break; - case 15: - case 16: - bpc = 6; /* min is 18bpp */ - break; - case 24: - bpc = 8; - break; - case 30: - bpc = 10; - break; - case 48: - bpc = 12; - break; - default: - DRM_DEBUG("unsupported depth, assuming 24 bits\n"); - bpc = min((unsigned int)8, display_bpc); - break; - } - - display_bpc = min(display_bpc, bpc); - - DRM_DEBUG_KMS("setting pipe bpc to %d (max display bpc %d)\n", - bpc, display_bpc); - - *pipe_bpp = display_bpc * 3; - - return display_bpc != bpc; -} - static int vlv_get_refclk(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; @@ -4665,10 +4529,6 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc, const intel_limit_t *limit; int ret; - /* temporary hack */ - intel_crtc->config.dither = - adjusted_mode->private_flags & INTEL_MODE_DP_FORCE_6BPC; - for_each_encoder_on_crtc(dev, crtc, encoder) { switch (encoder->type) { case INTEL_OUTPUT_LVDS: @@ -5673,10 +5533,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, intel_crtc_update_cursor(crtc, true); /* determine panel color depth */ - dither = intel_choose_pipe_bpp_dither(crtc, fb, - &intel_crtc->config.pipe_bpp, - adjusted_mode); - intel_crtc->config.dither = dither; + dither = intel_crtc->config.dither; if (is_lvds && dev_priv->lvds_dither) dither = true; @@ -5841,10 +5698,7 @@ static int haswell_crtc_mode_set(struct drm_crtc *crtc, intel_crtc_update_cursor(crtc, true); /* determine panel color depth */ - dither = intel_choose_pipe_bpp_dither(crtc, fb, - &intel_crtc->config.pipe_bpp, - adjusted_mode); - intel_crtc->config.dither = dither; + dither = intel_crtc->config.dither; DRM_DEBUG_KMS("Mode for pipe %d:\n", pipe); drm_mode_debug_printmodeline(mode); @@ -7525,14 +7379,72 @@ static void intel_modeset_commit_output_state(struct drm_device *dev) } } +static int +pipe_config_set_bpp(struct drm_crtc *crtc, + struct drm_framebuffer *fb, + struct intel_crtc_config *pipe_config) +{ + struct drm_device *dev = crtc->dev; + struct drm_connector *connector; + int bpp; + + switch (fb->depth) { + case 8: + bpp = 8*3; /* since we go through a colormap */ + break; + case 15: + case 16: + bpp = 6*3; /* min is 18bpp */ + break; + case 24: + bpp = 8*3; + break; + case 30: + bpp = 10*3; + break; + case 48: + bpp = 12*3; + break; + default: + DRM_DEBUG_KMS("unsupported depth\n"); + return -EINVAL; + } + + if (fb->depth > 24 && !HAS_PCH_SPLIT(dev)) { + DRM_DEBUG_KMS("high depth not supported on gmch platforms\n"); + return -EINVAL; + } + + pipe_config->pipe_bpp = bpp; + + /* Clamp display bpp to EDID value */ + list_for_each_entry(connector, &dev->mode_config.connector_list, + head) { + if (connector->encoder && connector->encoder->crtc != crtc) + continue; + + /* Don't use an invalid EDID bpc value */ + if (connector->display_info.bpc && + connector->display_info.bpc * 3 < bpp) { + DRM_DEBUG_KMS("clamping display bpp (was %d) to EDID reported max of %d\n", + bpp, connector->display_info.bpc*3); + pipe_config->pipe_bpp = connector->display_info.bpc*3; + } + } + + return bpp; +} + static struct intel_crtc_config * intel_modeset_pipe_config(struct drm_crtc *crtc, + struct drm_framebuffer *fb, struct drm_display_mode *mode) { struct drm_device *dev = crtc->dev; struct drm_encoder_helper_funcs *encoder_funcs; struct intel_encoder *encoder; struct intel_crtc_config *pipe_config; + int plane_bpp; pipe_config = kzalloc(sizeof(*pipe_config), GFP_KERNEL); if (!pipe_config) @@ -7541,6 +7453,10 @@ intel_modeset_pipe_config(struct drm_crtc *crtc, drm_mode_copy(&pipe_config->adjusted_mode, mode); drm_mode_copy(&pipe_config->requested_mode, mode); + plane_bpp = pipe_config_set_bpp(crtc, fb, pipe_config); + if (plane_bpp < 0) + goto fail; + /* Pass our mode to the connectors and the CRTC to give them a chance to * adjust it according to limitations or connector properties, and also * a chance to reject the mode entirely. @@ -7569,12 +7485,20 @@ intel_modeset_pipe_config(struct drm_crtc *crtc, } } + /* temporary hack until the DP code doesn't use the 6BPC flag any more */ + if (pipe_config->adjusted_mode.private_flags & INTEL_MODE_DP_FORCE_6BPC) + pipe_config->pipe_bpp = 6*8; + if (!(intel_crtc_compute_config(crtc, pipe_config))) { DRM_DEBUG_KMS("CRTC fixup failed\n"); goto fail; } DRM_DEBUG_KMS("[CRTC:%d]\n", crtc->base.id); + pipe_config->dither = pipe_config->pipe_bpp != plane_bpp; + DRM_DEBUG_KMS("plane bpp: %i, pipe bpp: %i, dithering: %i\n", + plane_bpp, pipe_config->pipe_bpp, pipe_config->dither); + return pipe_config; fail: kfree(pipe_config); @@ -7866,7 +7790,7 @@ int intel_set_mode(struct drm_crtc *crtc, * pieces of code that are not yet converted to deal with mutliple crtcs * changing their mode at the same time. */ if (modeset_pipes) { - pipe_config = intel_modeset_pipe_config(crtc, mode); + pipe_config = intel_modeset_pipe_config(crtc, fb, mode); if (IS_ERR(pipe_config)) { ret = PTR_ERR(pipe_config); pipe_config = NULL; @@ -8305,8 +8229,6 @@ static void intel_crtc_init(struct drm_device *dev, int pipe) dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = &intel_crtc->base; dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base; - intel_crtc->config.pipe_bpp = 24; /* default for pre-Ironlake */ - drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs); } diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index 0731ba6..b206a0d 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -791,6 +791,19 @@ bool intel_hdmi_compute_config(struct intel_encoder *encoder, if (HAS_PCH_SPLIT(dev) && !HAS_DDI(dev)) pipe_config->has_pch_encoder = true; + /* + * HDMI is either 12 or 8, so if the display lets 10bpc sneak + * through, clamp it down. Note that g4x/vlv don't support 12bpc hdmi + * outputs. + */ + if (pipe_config->pipe_bpp > 8*3 && HAS_PCH_SPLIT(dev)) { + DRM_DEBUG_KMS("forcing bpc to 12 for HDMI\n"); + pipe_config->pipe_bpp = 12*3; + } else { + DRM_DEBUG_KMS("forcing bpc to 8 for HDMI\n"); + pipe_config->pipe_bpp = 8*3; + } + return true; } diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 9d6ed91..7b6d07b6 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -310,6 +310,7 @@ static bool intel_lvds_compute_config(struct intel_encoder *intel_encoder, struct drm_display_mode *mode = &pipe_config->requested_mode; struct intel_crtc *intel_crtc = lvds_encoder->base.new_crtc; u32 pfit_control = 0, pfit_pgm_ratios = 0, border = 0; + unsigned int lvds_bpp; int pipe; /* Should never happen!! */ @@ -321,6 +322,17 @@ static bool intel_lvds_compute_config(struct intel_encoder *intel_encoder, if (intel_encoder_check_is_cloned(&lvds_encoder->base)) return false; + if ((I915_READ(lvds_encoder->reg) & LVDS_A3_POWER_MASK) == + LVDS_A3_POWER_UP) + lvds_bpp = 8*3; + else + lvds_bpp = 6*3; + + if (lvds_bpp != pipe_config->pipe_bpp) { + DRM_DEBUG_KMS("forcing display bpp (was %d) to LVDS (%d)\n", + pipe_config->pipe_bpp, lvds_bpp); + pipe_config->pipe_bpp = lvds_bpp; + } /* * We have timings from the BIOS for the panel, put them in * to the adjusted mode. The CRTC will be set up for this mode, |