summaryrefslogtreecommitdiff
path: root/drivers/hwmon/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/hwmon/Kconfig')
-rw-r--r--drivers/hwmon/Kconfig127
1 files changed, 38 insertions, 89 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 0598cd2..0b62c3c 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -623,7 +623,7 @@ config SENSORS_LM90
LM86, LM89 and LM99, Analog Devices ADM1032, ADT7461, and ADT7461A,
Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008,
- and Winbond/Nuvoton W83L771W/G/AWG/ASG sensor chips.
+ Winbond/Nuvoton W83L771W/G/AWG/ASG and Philips SA56004 sensor chips.
This driver can also be built as a module. If so, the module
will be called lm90.
@@ -694,14 +694,24 @@ config SENSORS_LTC4261
be called ltc4261.
config SENSORS_LM95241
- tristate "National Semiconductor LM95241 sensor chip"
+ tristate "National Semiconductor LM95241 and compatibles"
depends on I2C
help
- If you say yes here you get support for LM95241 sensor chip.
+ If you say yes here you get support for LM95231 and LM95241 sensor
+ chips.
This driver can also be built as a module. If so, the module
will be called lm95241.
+config SENSORS_LM95245
+ tristate "National Semiconductor LM95245 sensor chip"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for LM95245 sensor chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called lm95245.
+
config SENSORS_MAX1111
tristate "Maxim MAX1111 Multichannel, Serial 8-bit ADC chip"
depends on SPI_MASTER
@@ -736,6 +746,16 @@ config SENSORS_MAX1619
This driver can also be built as a module. If so, the module
will be called max1619.
+config SENSORS_MAX1668
+ tristate "Maxim MAX1668 and compatibles"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for MAX1668, MAX1989 and
+ MAX1805 chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called max1668.
+
config SENSORS_MAX6639
tristate "Maxim MAX6639 sensor chip"
depends on I2C && EXPERIMENTAL
@@ -767,6 +787,20 @@ config SENSORS_MAX6650
This driver can also be built as a module. If so, the module
will be called max6650.
+config SENSORS_NTC_THERMISTOR
+ tristate "NTC thermistor support"
+ depends on EXPERIMENTAL
+ help
+ This driver supports NTC thermistors sensor reading and its
+ interpretation. The driver can also monitor the temperature and
+ send notifications about the temperature.
+
+ Currently, this driver supports
+ NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, and NCP15WL333.
+
+ This driver can also be built as a module. If so, the module
+ will be called ntc-thermistor.
+
config SENSORS_PC87360
tristate "National Semiconductor PC87360 family"
select HWMON_VID
@@ -807,92 +841,7 @@ config SENSORS_PCF8591
These devices are hard to detect and rarely found on mainstream
hardware. If unsure, say N.
-config PMBUS
- tristate "PMBus support"
- depends on I2C && EXPERIMENTAL
- default n
- help
- Say yes here if you want to enable PMBus support.
-
- This driver can also be built as a module. If so, the module will
- be called pmbus_core.
-
-if PMBUS
-
-config SENSORS_PMBUS
- tristate "Generic PMBus devices"
- default n
- help
- If you say yes here you get hardware monitoring support for generic
- PMBus devices, including but not limited to BMR450, BMR451, BMR453,
- BMR454, and LTC2978.
-
- This driver can also be built as a module. If so, the module will
- be called pmbus.
-
-config SENSORS_ADM1275
- tristate "Analog Devices ADM1275"
- default n
- help
- If you say yes here you get hardware monitoring support for Analog
- Devices ADM1275 Hot-Swap Controller and Digital Power Monitor.
-
- This driver can also be built as a module. If so, the module will
- be called adm1275.
-
-config SENSORS_MAX16064
- tristate "Maxim MAX16064"
- default n
- help
- If you say yes here you get hardware monitoring support for Maxim
- MAX16064.
-
- This driver can also be built as a module. If so, the module will
- be called max16064.
-
-config SENSORS_MAX34440
- tristate "Maxim MAX34440/MAX34441"
- default n
- help
- If you say yes here you get hardware monitoring support for Maxim
- MAX34440 and MAX34441.
-
- This driver can also be built as a module. If so, the module will
- be called max34440.
-
-config SENSORS_MAX8688
- tristate "Maxim MAX8688"
- default n
- help
- If you say yes here you get hardware monitoring support for Maxim
- MAX8688.
-
- This driver can also be built as a module. If so, the module will
- be called max8688.
-
-config SENSORS_UCD9000
- tristate "TI UCD90120, UCD90124, UCD9090, UCD90910"
- default n
- help
- If you say yes here you get hardware monitoring support for TI
- UCD90120, UCD90124, UCD9090, UCD90910 Sequencer and System Health
- Controllers.
-
- This driver can also be built as a module. If so, the module will
- be called ucd9000.
-
-config SENSORS_UCD9200
- tristate "TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, UCD9248"
- default n
- help
- If you say yes here you get hardware monitoring support for TI
- UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248
- Digital PWM System Controllers.
-
- This driver can also be built as a module. If so, the module will
- be called ucd9200.
-
-endif # PMBUS
+source drivers/hwmon/pmbus/Kconfig
config SENSORS_SHT15
tristate "Sensiron humidity and temperature sensors. SHT15 and compat."