summaryrefslogtreecommitdiff
path: root/drivers/hwmon/lm75.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/hwmon/lm75.c')
-rw-r--r--drivers/hwmon/lm75.c39
1 files changed, 26 insertions, 13 deletions
diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index ef902d5..90126a2 100644
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -35,6 +35,7 @@
*/
enum lm75_type { /* keep sorted in alphabetical order */
+ adt75,
ds1775,
ds75,
lm75,
@@ -213,6 +214,7 @@ static int lm75_remove(struct i2c_client *client)
}
static const struct i2c_device_id lm75_ids[] = {
+ { "adt75", adt75, },
{ "ds1775", ds1775, },
{ "ds75", ds75, },
{ "lm75", lm75, },
@@ -247,19 +249,30 @@ static int lm75_detect(struct i2c_client *new_client,
I2C_FUNC_SMBUS_WORD_DATA))
return -ENODEV;
- /* Now, we do the remaining detection. There is no identification-
- dedicated register so we have to rely on several tricks:
- unused bits, registers cycling over 8-address boundaries,
- addresses 0x04-0x07 returning the last read value.
- The cycling+unused addresses combination is not tested,
- since it would significantly slow the detection down and would
- hardly add any value.
-
- The National Semiconductor LM75A is different than earlier
- LM75s. It has an ID byte of 0xaX (where X is the chip
- revision, with 1 being the only revision in existence) in
- register 7, and unused registers return 0xff rather than the
- last read value. */
+ /*
+ * Now, we do the remaining detection. There is no identification-
+ * dedicated register so we have to rely on several tricks:
+ * unused bits, registers cycling over 8-address boundaries,
+ * addresses 0x04-0x07 returning the last read value.
+ * The cycling+unused addresses combination is not tested,
+ * since it would significantly slow the detection down and would
+ * hardly add any value.
+ *
+ * The National Semiconductor LM75A is different than earlier
+ * LM75s. It has an ID byte of 0xaX (where X is the chip
+ * revision, with 1 being the only revision in existence) in
+ * register 7, and unused registers return 0xff rather than the
+ * last read value.
+ *
+ * Note that this function only detects the original National
+ * Semiconductor LM75 and the LM75A. Clones from other vendors
+ * aren't detected, on purpose, because they are typically never
+ * found on PC hardware. They are found on embedded designs where
+ * they can be instantiated explicitly so detection is not needed.
+ * The absence of identification registers on all these clones
+ * would make their exhaustive detection very difficult and weak,
+ * and odds are that the driver would bind to unsupported devices.
+ */
/* Unused bits */
conf = i2c_smbus_read_byte_data(new_client, 1);