1 files changed, 703 insertions, 0 deletions

diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
new file mode 100644
index 0000000..17376fe
--- /dev/null
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -0,0 +1,703 @@
+/*
+ * Provides I2C support for Philips PNX010x/PNX4008 boards.
+ *
+ * Authors: Dennis Kovalev <dkovalev@ru.mvista.com>
+ *	    Vitaly Wool <vwool@ru.mvista.com>
+ *
+ * 2004-2006 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/timer.h>
+#include <linux/completion.h>
+#include <linux/platform_device.h>
+#include <linux/i2c-pnx.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#define I2C_PNX_TIMEOUT		10 /* msec */
+#define I2C_PNX_SPEED_KHZ	100
+#define I2C_PNX_REGION_SIZE	0x100
+#define PNX_DEFAULT_FREQ	13 /* MHz */
+
+static inline int wait_timeout(long timeout, struct i2c_pnx_algo_data *data)
+{
+	while (timeout > 0 &&
+			(ioread32(I2C_REG_STS(data)) & mstatus_active)) {
+		mdelay(1);
+		timeout--;
+	}
+	return (timeout <= 0);
+}
+
+static inline int wait_reset(long timeout, struct i2c_pnx_algo_data *data)
+{
+	while (timeout > 0 &&
+			(ioread32(I2C_REG_CTL(data)) & mcntrl_reset)) {
+		mdelay(1);
+		timeout--;
+	}
+	return (timeout <= 0);
+}
+
+static inline void i2c_pnx_arm_timer(struct i2c_adapter *adap)
+{
+	struct i2c_pnx_algo_data *data = adap->algo_data;
+	struct timer_list *timer = &data->mif.timer;
+	int expires = I2C_PNX_TIMEOUT / (1000 / HZ);
+
+	del_timer_sync(timer);
+
+	dev_dbg(&adap->dev, "Timer armed at %lu plus %u jiffies.\n",
+		jiffies, expires);
+
+	timer->expires = jiffies + expires;
+	timer->data = (unsigned long)adap;
+
+	add_timer(timer);
+}
+
+/**
+ * i2c_pnx_start - start a device
+ * @slave_addr:		slave address
+ * @adap:		pointer to adapter structure
+ *
+ * Generate a START signal in the desired mode.
+ */
+static int i2c_pnx_start(unsigned char slave_addr, struct i2c_adapter *adap)
+{
+	struct i2c_pnx_algo_data *alg_data = adap->algo_data;
+
+	dev_dbg(&adap->dev, "%s(): addr 0x%x mode %d\n", __FUNCTION__,
+		slave_addr, alg_data->mif.mode);
+
+	/* Check for 7 bit slave addresses only */
+	if (slave_addr & ~0x7f) {
+		dev_err(&adap->dev, "%s: Invalid slave address %x. "
+		       "Only 7-bit addresses are supported\n",
+		       adap->name, slave_addr);
+		return -EINVAL;
+	}
+
+	/* First, make sure bus is idle */
+	if (wait_timeout(I2C_PNX_TIMEOUT, alg_data)) {
+		/* Somebody else is monopolizing the bus */
+		dev_err(&adap->dev, "%s: Bus busy. Slave addr = %02x, "
+		       "cntrl = %x, stat = %x\n",
+		       adap->name, slave_addr,
+		       ioread32(I2C_REG_CTL(alg_data)),
+		       ioread32(I2C_REG_STS(alg_data)));
+		return -EBUSY;
+	} else if (ioread32(I2C_REG_STS(alg_data)) & mstatus_afi) {
+		/* Sorry, we lost the bus */
+		dev_err(&adap->dev, "%s: Arbitration failure. "
+		       "Slave addr = %02x\n", adap->name, slave_addr);
+		return -EIO;
+	}
+
+	/*
+	 * OK, I2C is enabled and we have the bus.
+	 * Clear the current TDI and AFI status flags.
+	 */
+	iowrite32(ioread32(I2C_REG_STS(alg_data)) | mstatus_tdi | mstatus_afi,
+		  I2C_REG_STS(alg_data));
+
+	dev_dbg(&adap->dev, "%s(): sending %#x\n", __FUNCTION__,
+		(slave_addr << 1) | start_bit | alg_data->mif.mode);
+
+	/* Write the slave address, START bit and R/W bit */
+	iowrite32((slave_addr << 1) | start_bit | alg_data->mif.mode,
+		  I2C_REG_TX(alg_data));
+
+	dev_dbg(&adap->dev, "%s(): exit\n", __FUNCTION__);
+
+	return 0;
+}
+
+/**
+ * i2c_pnx_stop - stop a device
+ * @adap:		pointer to I2C adapter structure
+ *
+ * Generate a STOP signal to terminate the master transaction.
+ */
+static void i2c_pnx_stop(struct i2c_adapter *adap)
+{
+	struct i2c_pnx_algo_data *alg_data = adap->algo_data;
+	/* Only 1 msec max timeout due to interrupt context */
+	long timeout = 1000;
+
+	dev_dbg(&adap->dev, "%s(): entering: stat = %04x.\n",
+		__FUNCTION__, ioread32(I2C_REG_STS(alg_data)));
+
+	/* Write a STOP bit to TX FIFO */
+	iowrite32(0xff | stop_bit, I2C_REG_TX(alg_data));
+
+	/* Wait until the STOP is seen. */
+	while (timeout > 0 &&
+	       (ioread32(I2C_REG_STS(alg_data)) & mstatus_active)) {
+		/* may be called from interrupt context */
+		udelay(1);
+		timeout--;
+	}
+
+	dev_dbg(&adap->dev, "%s(): exiting: stat = %04x.\n",
+		__FUNCTION__, ioread32(I2C_REG_STS(alg_data)));
+}
+
+/**
+ * i2c_pnx_master_xmit - transmit data to slave
+ * @adap:		pointer to I2C adapter structure
+ *
+ * Sends one byte of data to the slave
+ */
+static int i2c_pnx_master_xmit(struct i2c_adapter *adap)
+{
+	struct i2c_pnx_algo_data *alg_data = adap->algo_data;
+	u32 val;
+
+	dev_dbg(&adap->dev, "%s(): entering: stat = %04x.\n",
+		__FUNCTION__, ioread32(I2C_REG_STS(alg_data)));
+
+	if (alg_data->mif.len > 0) {
+		/* We still have something to talk about... */
+		val = *alg_data->mif.buf++;
+
+		if (alg_data->mif.len == 1) {
+			val |= stop_bit;
+			if (!alg_data->last)
+				val |= start_bit;
+		}
+
+		alg_data->mif.len--;
+		iowrite32(val, I2C_REG_TX(alg_data));
+
+		dev_dbg(&adap->dev, "%s(): xmit %#x [%d]\n", __FUNCTION__,
+			val, alg_data->mif.len + 1);
+
+		if (alg_data->mif.len == 0) {
+			if (alg_data->last) {
+				/* Wait until the STOP is seen. */
+				if (wait_timeout(I2C_PNX_TIMEOUT, alg_data))
+					dev_err(&adap->dev, "The bus is still "
+						"active after timeout\n");
+			}
+			/* Disable master interrupts */
+			iowrite32(ioread32(I2C_REG_CTL(alg_data)) &
+				~(mcntrl_afie | mcntrl_naie | mcntrl_drmie),
+				  I2C_REG_CTL(alg_data));
+
+			del_timer_sync(&alg_data->mif.timer);
+
+			dev_dbg(&adap->dev, "%s(): Waking up xfer routine.\n",
+				__FUNCTION__);
+
+			complete(&alg_data->mif.complete);
+		}
+	} else if (alg_data->mif.len == 0) {
+		/* zero-sized transfer */
+		i2c_pnx_stop(adap);
+
+		/* Disable master interrupts. */
+		iowrite32(ioread32(I2C_REG_CTL(alg_data)) &
+			~(mcntrl_afie | mcntrl_naie | mcntrl_drmie),
+			  I2C_REG_CTL(alg_data));
+
+		/* Stop timer. */
+		del_timer_sync(&alg_data->mif.timer);
+		dev_dbg(&adap->dev, "%s(): Waking up xfer routine after "
+			"zero-xfer.\n", __FUNCTION__);
+
+		complete(&alg_data->mif.complete);
+	}
+
+	dev_dbg(&adap->dev, "%s(): exiting: stat = %04x.\n",
+		__FUNCTION__, ioread32(I2C_REG_STS(alg_data)));
+
+	return 0;
+}
+
+/**
+ * i2c_pnx_master_rcv - receive data from slave
+ * @adap:		pointer to I2C adapter structure
+ *
+ * Reads one byte data from the slave
+ */
+static int i2c_pnx_master_rcv(struct i2c_adapter *adap)
+{
+	struct i2c_pnx_algo_data *alg_data = adap->algo_data;
+	unsigned int val = 0;
+	u32 ctl = 0;
+
+	dev_dbg(&adap->dev, "%s(): entering: stat = %04x.\n",
+		__FUNCTION__, ioread32(I2C_REG_STS(alg_data)));
+
+	/* Check, whether there is already data,
+	 * or we didn't 'ask' for it yet.
+	 */
+	if (ioread32(I2C_REG_STS(alg_data)) & mstatus_rfe) {
+		dev_dbg(&adap->dev, "%s(): Write dummy data to fill "
+			"Rx-fifo...\n", __FUNCTION__);
+
+		if (alg_data->mif.len == 1) {
+			/* Last byte, do not acknowledge next rcv. */
+			val |= stop_bit;
+			if (!alg_data->last)
+				val |= start_bit;
+
+			/*
+			 * Enable interrupt RFDAIE (data in Rx fifo),
+			 * and disable DRMIE (need data for Tx)
+			 */
+			ctl = ioread32(I2C_REG_CTL(alg_data));
+			ctl |= mcntrl_rffie | mcntrl_daie;
+			ctl &= ~mcntrl_drmie;
+			iowrite32(ctl, I2C_REG_CTL(alg_data));
+		}
+
+		/*
+		 * Now we'll 'ask' for data:
+		 * For each byte we want to receive, we must
+		 * write a (dummy) byte to the Tx-FIFO.
+		 */
+		iowrite32(val, I2C_REG_TX(alg_data));
+
+		return 0;
+	}
+
+	/* Handle data. */
+	if (alg_data->mif.len > 0) {
+		val = ioread32(I2C_REG_RX(alg_data));
+		*alg_data->mif.buf++ = (u8) (val & 0xff);
+		dev_dbg(&adap->dev, "%s(): rcv 0x%x [%d]\n", __FUNCTION__, val,
+			alg_data->mif.len);
+
+		alg_data->mif.len--;
+		if (alg_data->mif.len == 0) {
+			if (alg_data->last)
+				/* Wait until the STOP is seen. */
+				if (wait_timeout(I2C_PNX_TIMEOUT, alg_data))
+					dev_err(&adap->dev, "The bus is still "
+						"active after timeout\n");
+
+			/* Disable master interrupts */
+			ctl = ioread32(I2C_REG_CTL(alg_data));
+			ctl &= ~(mcntrl_afie | mcntrl_naie | mcntrl_rffie |
+				 mcntrl_drmie | mcntrl_daie);
+			iowrite32(ctl, I2C_REG_CTL(alg_data));
+
+			/* Kill timer. */
+			del_timer_sync(&alg_data->mif.timer);
+			complete(&alg_data->mif.complete);
+		}
+	}
+
+	dev_dbg(&adap->dev, "%s(): exiting: stat = %04x.\n",
+		__FUNCTION__, ioread32(I2C_REG_STS(alg_data)));
+
+	return 0;
+}
+
+static irqreturn_t i2c_pnx_interrupt(int irq, void *dev_id)
+{
+	u32 stat, ctl;
+	struct i2c_adapter *adap = dev_id;
+	struct i2c_pnx_algo_data *alg_data = adap->algo_data;
+
+	dev_dbg(&adap->dev, "%s(): mstat = %x mctrl = %x, mode = %d\n",
+		__FUNCTION__,
+		ioread32(I2C_REG_STS(alg_data)),
+		ioread32(I2C_REG_CTL(alg_data)),
+		alg_data->mif.mode);
+	stat = ioread32(I2C_REG_STS(alg_data));
+
+	/* let's see what kind of event this is */
+	if (stat & mstatus_afi) {
+		/* We lost arbitration in the midst of a transfer */
+		alg_data->mif.ret = -EIO;
+
+		/* Disable master interrupts. */
+		ctl = ioread32(I2C_REG_CTL(alg_data));
+		ctl &= ~(mcntrl_afie | mcntrl_naie | mcntrl_rffie |
+			 mcntrl_drmie);
+		iowrite32(ctl, I2C_REG_CTL(alg_data));
+
+		/* Stop timer, to prevent timeout. */
+		del_timer_sync(&alg_data->mif.timer);
+		complete(&alg_data->mif.complete);
+	} else if (stat & mstatus_nai) {
+		/* Slave did not acknowledge, generate a STOP */
+		dev_dbg(&adap->dev, "%s(): "
+			"Slave did not acknowledge, generating a STOP.\n",
+			__FUNCTION__);
+		i2c_pnx_stop(adap);
+
+		/* Disable master interrupts. */
+		ctl = ioread32(I2C_REG_CTL(alg_data));
+		ctl &= ~(mcntrl_afie | mcntrl_naie | mcntrl_rffie |
+			 mcntrl_drmie);
+		iowrite32(ctl, I2C_REG_CTL(alg_data));
+
+		/* Our return value. */
+		alg_data->mif.ret = -EIO;
+
+		/* Stop timer, to prevent timeout. */
+		del_timer_sync(&alg_data->mif.timer);
+		complete(&alg_data->mif.complete);
+	} else {
+		/*
+		 * Two options:
+		 * - Master Tx needs data.
+		 * - There is data in the Rx-fifo
+		 * The latter is only the case if we have requested for data,
+		 * via a dummy write. (See 'i2c_pnx_master_rcv'.)
+		 * We therefore check, as a sanity check, whether that interrupt
+		 * has been enabled.
+		 */
+		if ((stat & mstatus_drmi) || !(stat & mstatus_rfe)) {
+			if (alg_data->mif.mode == I2C_SMBUS_WRITE) {
+				i2c_pnx_master_xmit(adap);
+			} else if (alg_data->mif.mode == I2C_SMBUS_READ) {
+				i2c_pnx_master_rcv(adap);
+			}
+		}
+	}
+
+	/* Clear TDI and AFI bits */
+	stat = ioread32(I2C_REG_STS(alg_data));
+	iowrite32(stat | mstatus_tdi | mstatus_afi, I2C_REG_STS(alg_data));
+
+	dev_dbg(&adap->dev, "%s(): exiting, stat = %x ctrl = %x.\n",
+		 __FUNCTION__, ioread32(I2C_REG_STS(alg_data)),
+		 ioread32(I2C_REG_CTL(alg_data)));
+
+	return IRQ_HANDLED;
+}
+
+static void i2c_pnx_timeout(unsigned long data)
+{
+	struct i2c_adapter *adap = (struct i2c_adapter *)data;
+	struct i2c_pnx_algo_data *alg_data = adap->algo_data;
+	u32 ctl;
+
+	dev_err(&adap->dev, "Master timed out. stat = %04x, cntrl = %04x. "
+	       "Resetting master...\n",
+	       ioread32(I2C_REG_STS(alg_data)),
+	       ioread32(I2C_REG_CTL(alg_data)));
+
+	/* Reset master and disable interrupts */
+	ctl = ioread32(I2C_REG_CTL(alg_data));
+	ctl &= ~(mcntrl_afie | mcntrl_naie | mcntrl_rffie | mcntrl_drmie);
+	iowrite32(ctl, I2C_REG_CTL(alg_data));
+
+	ctl |= mcntrl_reset;
+	iowrite32(ctl, I2C_REG_CTL(alg_data));
+	wait_reset(I2C_PNX_TIMEOUT, alg_data);
+	alg_data->mif.ret = -EIO;
+	complete(&alg_data->mif.complete);
+}
+
+static inline void bus_reset_if_active(struct i2c_adapter *adap)
+{
+	struct i2c_pnx_algo_data *alg_data = adap->algo_data;
+	u32 stat;
+
+	if ((stat = ioread32(I2C_REG_STS(alg_data))) & mstatus_active) {
+		dev_err(&adap->dev,
+			"%s: Bus is still active after xfer. Reset it...\n",
+		       adap->name);
+		iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_reset,
+			  I2C_REG_CTL(alg_data));
+		wait_reset(I2C_PNX_TIMEOUT, alg_data);
+	} else if (!(stat & mstatus_rfe) || !(stat & mstatus_tfe)) {
+		/* If there is data in the fifo's after transfer,
+		 * flush fifo's by reset.
+		 */
+		iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_reset,
+			  I2C_REG_CTL(alg_data));
+		wait_reset(I2C_PNX_TIMEOUT, alg_data);
+	} else if (stat & mstatus_nai) {
+		iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_reset,
+			  I2C_REG_CTL(alg_data));
+		wait_reset(I2C_PNX_TIMEOUT, alg_data);
+	}
+}
+
+/**
+ * i2c_pnx_xfer - generic transfer entry point
+ * @adap:		pointer to I2C adapter structure
+ * @msgs:		array of messages
+ * @num:		number of messages
+ *
+ * Initiates the transfer
+ */
+static int
+i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+{
+	struct i2c_msg *pmsg;
+	int rc = 0, completed = 0, i;
+	struct i2c_pnx_algo_data *alg_data = adap->algo_data;
+	u32 stat = ioread32(I2C_REG_STS(alg_data));
+
+	dev_dbg(&adap->dev, "%s(): entering: %d messages, stat = %04x.\n",
+		__FUNCTION__, num, ioread32(I2C_REG_STS(alg_data)));
+
+	bus_reset_if_active(adap);
+
+	/* Process transactions in a loop. */
+	for (i = 0; rc >= 0 && i < num; i++) {
+		u8 addr;
+
+		pmsg = &msgs[i];
+		addr = pmsg->addr;
+
+		if (pmsg->flags & I2C_M_TEN) {
+			dev_err(&adap->dev,
+				"%s: 10 bits addr not supported!\n",
+				adap->name);
+			rc = -EINVAL;
+			break;
+		}
+
+		alg_data->mif.buf = pmsg->buf;
+		alg_data->mif.len = pmsg->len;
+		alg_data->mif.mode = (pmsg->flags & I2C_M_RD) ?
+			I2C_SMBUS_READ : I2C_SMBUS_WRITE;
+		alg_data->mif.ret = 0;
+		alg_data->last = (i == num - 1);
+
+		dev_dbg(&adap->dev, "%s(): mode %d, %d bytes\n", __FUNCTION__,
+			alg_data->mif.mode,
+			alg_data->mif.len);
+
+		i2c_pnx_arm_timer(adap);
+
+		/* initialize the completion var */
+		init_completion(&alg_data->mif.complete);
+
+		/* Enable master interrupt */
+		iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_afie |
+				mcntrl_naie | mcntrl_drmie,
+			  I2C_REG_CTL(alg_data));
+
+		/* Put start-code and slave-address on the bus. */
+		rc = i2c_pnx_start(addr, adap);
+		if (rc < 0)
+			break;
+
+		/* Wait for completion */
+		wait_for_completion(&alg_data->mif.complete);
+
+		if (!(rc = alg_data->mif.ret))
+			completed++;
+		dev_dbg(&adap->dev, "%s(): Complete, return code = %d.\n",
+			__FUNCTION__, rc);
+
+		/* Clear TDI and AFI bits in case they are set. */
+		if ((stat = ioread32(I2C_REG_STS(alg_data))) & mstatus_tdi) {
+			dev_dbg(&adap->dev,
+				"%s: TDI still set... clearing now.\n",
+			       adap->name);
+			iowrite32(stat, I2C_REG_STS(alg_data));
+		}
+		if ((stat = ioread32(I2C_REG_STS(alg_data))) & mstatus_afi) {
+			dev_dbg(&adap->dev,
+				"%s: AFI still set... clearing now.\n",
+			       adap->name);
+			iowrite32(stat, I2C_REG_STS(alg_data));
+		}
+	}
+
+	bus_reset_if_active(adap);
+
+	/* Cleanup to be sure... */
+	alg_data->mif.buf = NULL;
+	alg_data->mif.len = 0;
+
+	dev_dbg(&adap->dev, "%s(): exiting, stat = %x\n",
+		__FUNCTION__, ioread32(I2C_REG_STS(alg_data)));
+
+	if (completed != num)
+		return ((rc < 0) ? rc : -EREMOTEIO);
+
+	return num;
+}
+
+static u32 i2c_pnx_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static struct i2c_algorithm pnx_algorithm = {
+	.master_xfer = i2c_pnx_xfer,
+	.functionality = i2c_pnx_func,
+};
+
+static int i2c_pnx_controller_suspend(struct platform_device *pdev,
+				      pm_message_t state)
+{
+	struct i2c_pnx_data *i2c_pnx = platform_get_drvdata(pdev);
+	return i2c_pnx->suspend(pdev, state);
+}
+
+static int i2c_pnx_controller_resume(struct platform_device *pdev)
+{
+	struct i2c_pnx_data *i2c_pnx = platform_get_drvdata(pdev);
+	return i2c_pnx->resume(pdev);
+}
+
+static int __devinit i2c_pnx_probe(struct platform_device *pdev)
+{
+	unsigned long tmp;
+	int ret = 0;
+	struct i2c_pnx_algo_data *alg_data;
+	int freq_mhz;
+	struct i2c_pnx_data *i2c_pnx = pdev->dev.platform_data;
+
+	if (!i2c_pnx || !i2c_pnx->adapter) {
+		dev_err(&pdev->dev, "%s: no platform data supplied\n",
+		       __FUNCTION__);
+		ret = -EINVAL;
+		goto out;
+	}
+
+	platform_set_drvdata(pdev, i2c_pnx);
+
+	if (i2c_pnx->calculate_input_freq)
+		freq_mhz = i2c_pnx->calculate_input_freq(pdev);
+	else {
+		freq_mhz = PNX_DEFAULT_FREQ;
+		dev_info(&pdev->dev, "Setting bus frequency to default value: "
+		       "%d MHz", freq_mhz);
+	}
+
+	i2c_pnx->adapter->algo = &pnx_algorithm;
+
+	alg_data = i2c_pnx->adapter->algo_data;
+	init_timer(&alg_data->mif.timer);
+	alg_data->mif.timer.function = i2c_pnx_timeout;
+	alg_data->mif.timer.data = (unsigned long)i2c_pnx->adapter;
+
+	/* Register I/O resource */
+	if (!request_region(alg_data->base, I2C_PNX_REGION_SIZE, pdev->name)) {
+		dev_err(&pdev->dev,
+		       "I/O region 0x%08x for I2C already in use.\n",
+		       alg_data->base);
+		ret = -ENODEV;
+		goto out_drvdata;
+	}
+
+	if (!(alg_data->ioaddr =
+			(u32)ioremap(alg_data->base, I2C_PNX_REGION_SIZE))) {
+		dev_err(&pdev->dev, "Couldn't ioremap I2C I/O region\n");
+		ret = -ENOMEM;
+		goto out_release;
+	}
+
+	i2c_pnx->set_clock_run(pdev);
+
+	/*
+	 * Clock Divisor High This value is the number of system clocks
+	 * the serial clock (SCL) will be high.
+	 * For example, if the system clock period is 50 ns and the maximum
+	 * desired serial period is 10000 ns (100 kHz), then CLKHI would be
+	 * set to 0.5*(f_sys/f_i2c)-2=0.5*(20e6/100e3)-2=98. The actual value
+	 * programmed into CLKHI will vary from this slightly due to
+	 * variations in the output pad's rise and fall times as well as
+	 * the deglitching filter length.
+	 */
+
+	tmp = ((freq_mhz * 1000) / I2C_PNX_SPEED_KHZ) / 2 - 2;
+	iowrite32(tmp, I2C_REG_CKH(alg_data));
+	iowrite32(tmp, I2C_REG_CKL(alg_data));
+
+	iowrite32(mcntrl_reset, I2C_REG_CTL(alg_data));
+	if (wait_reset(I2C_PNX_TIMEOUT, alg_data)) {
+		ret = -ENODEV;
+		goto out_unmap;
+	}
+	init_completion(&alg_data->mif.complete);
+
+	ret = request_irq(alg_data->irq, i2c_pnx_interrupt,
+			0, pdev->name, i2c_pnx->adapter);
+	if (ret)
+		goto out_clock;
+
+	/* Register this adapter with the I2C subsystem */
+	i2c_pnx->adapter->dev.parent = &pdev->dev;
+	ret = i2c_add_adapter(i2c_pnx->adapter);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "I2C: Failed to add bus\n");
+		goto out_irq;
+	}
+
+	dev_dbg(&pdev->dev, "%s: Master at %#8x, irq %d.\n",
+	       i2c_pnx->adapter->name, alg_data->base, alg_data->irq);
+
+	return 0;
+
+out_irq:
+	free_irq(alg_data->irq, alg_data);
+out_clock:
+	i2c_pnx->set_clock_stop(pdev);
+out_unmap:
+	iounmap((void *)alg_data->ioaddr);
+out_release:
+	release_region(alg_data->base, I2C_PNX_REGION_SIZE);
+out_drvdata:
+	platform_set_drvdata(pdev, NULL);
+out:
+	return ret;
+}
+
+static int __devexit i2c_pnx_remove(struct platform_device *pdev)
+{
+	struct i2c_pnx_data *i2c_pnx = platform_get_drvdata(pdev);
+	struct i2c_adapter *adap = i2c_pnx->adapter;
+	struct i2c_pnx_algo_data *alg_data = adap->algo_data;
+
+	free_irq(alg_data->irq, alg_data);
+	i2c_del_adapter(adap);
+	i2c_pnx->set_clock_stop(pdev);
+	iounmap((void *)alg_data->ioaddr);
+	release_region(alg_data->base, I2C_PNX_REGION_SIZE);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static struct platform_driver i2c_pnx_driver = {
+	.driver = {
+		.name = "pnx-i2c",
+		.owner = THIS_MODULE,
+	},
+	.probe = i2c_pnx_probe,
+	.remove = __devexit_p(i2c_pnx_remove),
+	.suspend = i2c_pnx_controller_suspend,
+	.resume = i2c_pnx_controller_resume,
+};
+
+static int __init i2c_adap_pnx_init(void)
+{
+	return platform_driver_register(&i2c_pnx_driver);
+}
+
+static void __exit i2c_adap_pnx_exit(void)
+{
+	platform_driver_unregister(&i2c_pnx_driver);
+}
+
+MODULE_AUTHOR("Vitaly Wool, Dennis Kovalev <source@mvista.com>");
+MODULE_DESCRIPTION("I2C driver for Philips IP3204-based I2C busses");
+MODULE_LICENSE("GPL");
+
+/* We need to make sure I2C is initialized before USB */
+subsys_initcall(i2c_adap_pnx_init);
+module_exit(i2c_adap_pnx_exit);