diff options
Diffstat (limited to 'drivers/i2c/i2c-core.c')
| -rw-r--r-- | drivers/i2c/i2c-core.c | 159 |
1 files changed, 159 insertions, 0 deletions
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index f7dfe87..0d873ba 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -27,7 +27,9 @@ #include <linux/module.h> #include <linux/kernel.h> +#include <linux/delay.h> #include <linux/errno.h> +#include <linux/gpio.h> #include <linux/slab.h> #include <linux/i2c.h> #include <linux/init.h> @@ -109,6 +111,130 @@ static int i2c_device_uevent(struct device *dev, struct kobj_uevent_env *env) #define i2c_device_uevent NULL #endif /* CONFIG_HOTPLUG */ +/* i2c bus recovery routines */ +static int get_scl_gpio_value(struct i2c_adapter *adap) +{ + return gpio_get_value(adap->bus_recovery_info->scl_gpio); +} + +static void set_scl_gpio_value(struct i2c_adapter *adap, int val) +{ + gpio_set_value(adap->bus_recovery_info->scl_gpio, val); +} + +static int get_sda_gpio_value(struct i2c_adapter *adap) +{ + return gpio_get_value(adap->bus_recovery_info->sda_gpio); +} + +static int i2c_get_gpios_for_recovery(struct i2c_adapter *adap) +{ + struct i2c_bus_recovery_info *bri = adap->bus_recovery_info; + struct device *dev = &adap->dev; + int ret = 0; + + ret = gpio_request_one(bri->scl_gpio, GPIOF_OPEN_DRAIN | + GPIOF_OUT_INIT_HIGH, "i2c-scl"); + if (ret) { + dev_warn(dev, "Can't get SCL gpio: %d\n", bri->scl_gpio); + return ret; + } + + if (bri->get_sda) { + if (gpio_request_one(bri->sda_gpio, GPIOF_IN, "i2c-sda")) { + /* work without SDA polling */ + dev_warn(dev, "Can't get SDA gpio: %d. Not using SDA polling\n", + bri->sda_gpio); + bri->get_sda = NULL; + } + } + + return ret; +} + +static void i2c_put_gpios_for_recovery(struct i2c_adapter *adap) +{ + struct i2c_bus_recovery_info *bri = adap->bus_recovery_info; + + if (bri->get_sda) + gpio_free(bri->sda_gpio); + + gpio_free(bri->scl_gpio); +} + +/* + * We are generating clock pulses. ndelay() determines durating of clk pulses. + * We will generate clock with rate 100 KHz and so duration of both clock levels + * is: delay in ns = (10^6 / 100) / 2 + */ +#define RECOVERY_NDELAY 5000 +#define RECOVERY_CLK_CNT 9 + +static int i2c_generic_recovery(struct i2c_adapter *adap) +{ + struct i2c_bus_recovery_info *bri = adap->bus_recovery_info; + int i = 0, val = 1, ret = 0; + + if (bri->prepare_recovery) + bri->prepare_recovery(bri); + + /* + * By this time SCL is high, as we need to give 9 falling-rising edges + */ + while (i++ < RECOVERY_CLK_CNT * 2) { + if (val) { + /* Break if SDA is high */ + if (bri->get_sda && bri->get_sda(adap)) + break; + /* SCL shouldn't be low here */ + if (!bri->get_scl(adap)) { + dev_err(&adap->dev, + "SCL is stuck low, exit recovery\n"); + ret = -EBUSY; + break; + } + } + + val = !val; + bri->set_scl(adap, val); + ndelay(RECOVERY_NDELAY); + } + + if (bri->unprepare_recovery) + bri->unprepare_recovery(bri); + + return ret; +} + +int i2c_generic_scl_recovery(struct i2c_adapter *adap) +{ + adap->bus_recovery_info->set_scl(adap, 1); + return i2c_generic_recovery(adap); +} + +int i2c_generic_gpio_recovery(struct i2c_adapter *adap) +{ + int ret; + + ret = i2c_get_gpios_for_recovery(adap); + if (ret) + return ret; + + ret = i2c_generic_recovery(adap); + i2c_put_gpios_for_recovery(adap); + + return ret; +} + +int i2c_recover_bus(struct i2c_adapter *adap) +{ + if (!adap->bus_recovery_info) + return -EOPNOTSUPP; + + dev_dbg(&adap->dev, "Trying i2c bus recovery\n"); + return adap->bus_recovery_info->recover_bus(adap); +} + static int i2c_device_probe(struct device *dev) { struct i2c_client *client = i2c_verify_client(dev); @@ -902,6 +1028,39 @@ static int i2c_register_adapter(struct i2c_adapter *adap) "Failed to create compatibility class link\n"); #endif + /* bus recovery specific initialization */ + if (adap->bus_recovery_info) { + struct i2c_bus_recovery_info *bri = adap->bus_recovery_info; + + if (!bri->recover_bus) { + dev_err(&adap->dev, "No recover_bus() found, not using recovery\n"); + adap->bus_recovery_info = NULL; + goto exit_recovery; + } + + /* Generic GPIO recovery */ + if (bri->recover_bus == i2c_generic_gpio_recovery) { + if (!gpio_is_valid(bri->scl_gpio)) { + dev_err(&adap->dev, "Invalid SCL gpio, not using recovery\n"); + adap->bus_recovery_info = NULL; + goto exit_recovery; + } + + if (gpio_is_valid(bri->sda_gpio)) + bri->get_sda = get_sda_gpio_value; + else + bri->get_sda = NULL; + + bri->get_scl = get_scl_gpio_value; + bri->set_scl = set_scl_gpio_value; + } else if (!bri->set_scl || !bri->get_scl) { + /* Generic SCL recovery */ + dev_err(&adap->dev, "No {get|set}_gpio() found, not using recovery\n"); + adap->bus_recovery_info = NULL; + } + } + +exit_recovery: /* create pre-declared device nodes */ if (adap->nr < __i2c_first_dynamic_bus_num) i2c_scan_static_board_info(adap); |