diff options
Diffstat (limited to 'drivers/ide/ide.c')
-rw-r--r-- | drivers/ide/ide.c | 360 |
1 files changed, 198 insertions, 162 deletions
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index bced02f..999584c 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -94,12 +94,6 @@ DEFINE_MUTEX(ide_cfg_mtx); int noautodma = 0; -#ifdef CONFIG_BLK_DEV_IDEACPI -int ide_noacpi = 0; -int ide_noacpitfs = 1; -int ide_noacpionboot = 1; -#endif - ide_hwif_t ide_hwifs[MAX_HWIFS]; /* master data repository */ static void ide_port_init_devices_data(ide_hwif_t *); @@ -293,7 +287,7 @@ EXPORT_SYMBOL_GPL(ide_port_unregister_devices); /** * ide_unregister - free an IDE interface - * @index: index of interface (will change soon to a pointer) + * @hwif: IDE interface * * Perform the final unregister of an IDE interface. At the moment * we don't refcount interfaces so this will also get split up. @@ -313,19 +307,16 @@ EXPORT_SYMBOL_GPL(ide_port_unregister_devices); * This is raving bonkers. */ -void ide_unregister(unsigned int index) +void ide_unregister(ide_hwif_t *hwif) { - ide_hwif_t *hwif, *g; + ide_hwif_t *g; ide_hwgroup_t *hwgroup; int irq_count = 0; - BUG_ON(index >= MAX_HWIFS); - BUG_ON(in_interrupt()); BUG_ON(irqs_disabled()); mutex_lock(&ide_cfg_mtx); spin_lock_irq(&ide_lock); - hwif = &ide_hwifs[index]; if (!hwif->present) goto abort; __ide_port_unregister_devices(hwif); @@ -366,7 +357,7 @@ void ide_unregister(unsigned int index) ide_release_dma_engine(hwif); /* restore hwif data to pristine status */ - ide_init_port_data(hwif, index); + ide_init_port_data(hwif, hwif->index); abort: spin_unlock_irq(&ide_lock); @@ -377,7 +368,7 @@ EXPORT_SYMBOL(ide_unregister); void ide_init_port_hw(ide_hwif_t *hwif, hw_regs_t *hw) { - memcpy(hwif->io_ports, hw->io_ports, sizeof(hwif->io_ports)); + memcpy(&hwif->io_ports, &hw->io_ports, sizeof(hwif->io_ports)); hwif->irq = hw->irq; hwif->chipset = hw->chipset; hwif->gendev.parent = hw->dev; @@ -837,16 +828,6 @@ static int __init match_parm (char *s, const char *keywords[], int vals[], int m return 0; /* zero = nothing matched */ } -extern int probe_ali14xx; -extern int probe_umc8672; -extern int probe_dtc2278; -extern int probe_ht6560b; -extern int probe_qd65xx; -extern int cmd640_vlb; -extern int probe_4drives; - -static int __initdata is_chipset_set; - /* * ide_setup() gets called VERY EARLY during initialization, * to handle kernel "command line" strings beginning with "hdx=" or "ide". @@ -855,14 +836,12 @@ static int __initdata is_chipset_set; */ static int __init ide_setup(char *s) { - int i, vals[3]; ide_hwif_t *hwif; ide_drive_t *drive; unsigned int hw, unit; + int vals[3]; const char max_drive = 'a' + ((MAX_HWIFS * MAX_DRIVES) - 1); - const char max_hwif = '0' + (MAX_HWIFS - 1); - if (strncmp(s,"hd",2) == 0 && s[2] == '=') /* hd= is for hd.c */ return 0; /* driver and not us */ @@ -878,7 +857,7 @@ static int __init ide_setup(char *s) printk(" : Enabled support for IDE doublers\n"); ide_doubler = 1; - return 1; + goto obsolete_option; } #endif /* CONFIG_BLK_DEV_IDEDOUBLER */ @@ -892,17 +871,17 @@ static int __init ide_setup(char *s) if (!strcmp(s, "ide=noacpi")) { //printk(" : Disable IDE ACPI support.\n"); ide_noacpi = 1; - return 1; + goto obsolete_option; } if (!strcmp(s, "ide=acpigtf")) { //printk(" : Enable IDE ACPI _GTF support.\n"); - ide_noacpitfs = 0; - return 1; + ide_acpigtf = 1; + goto obsolete_option; } if (!strcmp(s, "ide=acpionboot")) { //printk(" : Call IDE ACPI methods on boot.\n"); - ide_noacpionboot = 0; - return 1; + ide_acpionboot = 1; + goto obsolete_option; } #endif /* CONFIG_BLK_DEV_IDEACPI */ @@ -912,7 +891,7 @@ static int __init ide_setup(char *s) if (s[0] == 'h' && s[1] == 'd' && s[2] >= 'a' && s[2] <= max_drive) { const char *hd_words[] = { "none", "noprobe", "nowerr", "cdrom", "nodma", - "autotune", "noautotune", "-8", "-9", "-10", + "-6", "-7", "-8", "-9", "-10", "noflush", "remap", "remap63", "scsi", NULL }; unit = s[2] - 'a'; hw = unit / MAX_DRIVES; @@ -927,28 +906,22 @@ static int __init ide_setup(char *s) case -1: /* "none" */ case -2: /* "noprobe" */ drive->noprobe = 1; - goto done; + goto obsolete_option; case -3: /* "nowerr" */ drive->bad_wstat = BAD_R_STAT; - goto done; + goto obsolete_option; case -4: /* "cdrom" */ drive->present = 1; drive->media = ide_cdrom; /* an ATAPI device ignores DRDY */ drive->ready_stat = 0; - goto done; + goto obsolete_option; case -5: /* nodma */ drive->nodma = 1; - goto done; - case -6: /* "autotune" */ - drive->autotune = IDE_TUNE_AUTO; - goto obsolete_option; - case -7: /* "noautotune" */ - drive->autotune = IDE_TUNE_NOAUTO; goto obsolete_option; case -11: /* noflush */ drive->noflush = 1; - goto done; + goto obsolete_option; case -12: /* "remap" */ drive->remap_0_to_1 = 1; goto obsolete_option; @@ -966,7 +939,7 @@ static int __init ide_setup(char *s) drive->sect = drive->bios_sect = vals[2]; drive->present = 1; drive->forced_geom = 1; - goto done; + goto obsolete_option; default: goto bad_option; } @@ -984,126 +957,15 @@ static int __init ide_setup(char *s) idebus_parameter = vals[0]; } else printk(" -- BAD BUS SPEED! Expected value from 20 to 66"); - goto done; + goto obsolete_option; } - /* - * Look for interface options: "idex=" - */ - if (s[3] >= '0' && s[3] <= max_hwif) { - /* - * Be VERY CAREFUL changing this: note hardcoded indexes below - * (-8, -9, -10) are reserved to ease the hardcoding. - */ - static const char *ide_words[] = { - "minus1", "serialize", "minus3", "minus4", - "reset", "minus6", "ata66", "minus8", "minus9", - "minus10", "four", "qd65xx", "ht6560b", "cmd640_vlb", - "dtc2278", "umc8672", "ali14xx", NULL }; - - hw = s[3] - '0'; - hwif = &ide_hwifs[hw]; - i = match_parm(&s[4], ide_words, vals, 3); - - /* - * Cryptic check to ensure chipset not already set for hwif. - * Note: we can't depend on hwif->chipset here. - */ - if (i >= -18 && i <= -11) { - /* chipset already specified */ - if (is_chipset_set) - goto bad_option; - /* these drivers are for "ide0=" only */ - if (hw != 0) - goto bad_hwif; - is_chipset_set = 1; - printk("\n"); - } - - switch (i) { -#ifdef CONFIG_BLK_DEV_ALI14XX - case -17: /* "ali14xx" */ - probe_ali14xx = 1; - goto obsolete_option; -#endif -#ifdef CONFIG_BLK_DEV_UMC8672 - case -16: /* "umc8672" */ - probe_umc8672 = 1; - goto obsolete_option; -#endif -#ifdef CONFIG_BLK_DEV_DTC2278 - case -15: /* "dtc2278" */ - probe_dtc2278 = 1; - goto obsolete_option; -#endif -#ifdef CONFIG_BLK_DEV_CMD640 - case -14: /* "cmd640_vlb" */ - cmd640_vlb = 1; - goto obsolete_option; -#endif -#ifdef CONFIG_BLK_DEV_HT6560B - case -13: /* "ht6560b" */ - probe_ht6560b = 1; - goto obsolete_option; -#endif -#ifdef CONFIG_BLK_DEV_QD65XX - case -12: /* "qd65xx" */ - probe_qd65xx = 1; - goto obsolete_option; -#endif -#ifdef CONFIG_BLK_DEV_4DRIVES - case -11: /* "four" drives on one set of ports */ - probe_4drives = 1; - goto obsolete_option; -#endif - case -10: /* minus10 */ - case -9: /* minus9 */ - case -8: /* minus8 */ - case -6: - case -4: - case -3: - goto bad_option; - case -7: /* ata66 */ -#ifdef CONFIG_BLK_DEV_IDEPCI - /* - * Use ATA_CBL_PATA40_SHORT so drive side - * cable detection is also overriden. - */ - hwif->cbl = ATA_CBL_PATA40_SHORT; - goto obsolete_option; -#else - goto bad_hwif; -#endif - case -5: /* "reset" */ - hwif->reset = 1; - goto obsolete_option; - case -2: /* "serialize" */ - hwif->mate = &ide_hwifs[hw^1]; - hwif->mate->mate = hwif; - hwif->serialized = hwif->mate->serialized = 1; - goto obsolete_option; - case -1: - case 0: - case 1: - case 2: - case 3: - goto bad_option; - default: - printk(" -- SUPPORT NOT CONFIGURED IN THIS KERNEL\n"); - return 1; - } - } bad_option: printk(" -- BAD OPTION\n"); return 1; obsolete_option: printk(" -- OBSOLETE OPTION, WILL BE REMOVED SOON!\n"); return 1; -bad_hwif: - printk("-- NOT SUPPORTED ON ide%d", hw); -done: - printk("\n"); - return 1; } EXPORT_SYMBOL(ide_lock); @@ -1239,6 +1101,185 @@ static void ide_port_class_release(struct device *portdev) put_device(&hwif->gendev); } +int ide_vlb_clk; +EXPORT_SYMBOL_GPL(ide_vlb_clk); + +module_param_named(vlb_clock, ide_vlb_clk, int, 0); +MODULE_PARM_DESC(vlb_clock, "VLB clock frequency (in MHz)"); + +int ide_pci_clk; +EXPORT_SYMBOL_GPL(ide_pci_clk); + +module_param_named(pci_clock, ide_pci_clk, int, 0); +MODULE_PARM_DESC(pci_clock, "PCI bus clock frequency (in MHz)"); + +static int ide_set_dev_param_mask(const char *s, struct kernel_param *kp) +{ + int a, b, i, j = 1; + unsigned int *dev_param_mask = (unsigned int *)kp->arg; + + if (sscanf(s, "%d.%d:%d", &a, &b, &j) != 3 && + sscanf(s, "%d.%d", &a, &b) != 2) + return -EINVAL; + + i = a * MAX_DRIVES + b; + + if (i >= MAX_HWIFS * MAX_DRIVES || j < 0 || j > 1) + return -EINVAL; + + if (j) + *dev_param_mask |= (1 << i); + else + *dev_param_mask &= (1 << i); + + return 0; +} + +static unsigned int ide_nodma; + +module_param_call(nodma, ide_set_dev_param_mask, NULL, &ide_nodma, 0); +MODULE_PARM_DESC(nodma, "disallow DMA for a device"); + +static unsigned int ide_noflush; + +module_param_call(noflush, ide_set_dev_param_mask, NULL, &ide_noflush, 0); +MODULE_PARM_DESC(noflush, "disable flush requests for a device"); + +static unsigned int ide_noprobe; + +module_param_call(noprobe, ide_set_dev_param_mask, NULL, &ide_noprobe, 0); +MODULE_PARM_DESC(noprobe, "skip probing for a device"); + +static unsigned int ide_nowerr; + +module_param_call(nowerr, ide_set_dev_param_mask, NULL, &ide_nowerr, 0); +MODULE_PARM_DESC(nowerr, "ignore the WRERR_STAT bit for a device"); + +static unsigned int ide_cdroms; + +module_param_call(cdrom, ide_set_dev_param_mask, NULL, &ide_cdroms, 0); +MODULE_PARM_DESC(cdrom, "force device as a CD-ROM"); + +struct chs_geom { + unsigned int cyl; + u8 head; + u8 sect; +}; + +static unsigned int ide_disks; +static struct chs_geom ide_disks_chs[MAX_HWIFS * MAX_DRIVES]; + +static int ide_set_disk_chs(const char *str, struct kernel_param *kp) +{ + int a, b, c = 0, h = 0, s = 0, i, j = 1; + + if (sscanf(str, "%d.%d:%d,%d,%d", &a, &b, &c, &h, &s) != 5 && + sscanf(str, "%d.%d:%d", &a, &b, &j) != 3) + return -EINVAL; + + i = a * MAX_DRIVES + b; + + if (i >= MAX_HWIFS * MAX_DRIVES || j < 0 || j > 1) + return -EINVAL; + + if (c > INT_MAX || h > 255 || s > 255) + return -EINVAL; + + if (j) + ide_disks |= (1 << i); + else + ide_disks &= (1 << i); + + ide_disks_chs[i].cyl = c; + ide_disks_chs[i].head = h; + ide_disks_chs[i].sect = s; + + return 0; +} + +module_param_call(chs, ide_set_disk_chs, NULL, NULL, 0); +MODULE_PARM_DESC(chs, "force device as a disk (using CHS)"); + +static void ide_dev_apply_params(ide_drive_t *drive) +{ + int i = drive->hwif->index * MAX_DRIVES + drive->select.b.unit; + + if (ide_nodma & (1 << i)) { + printk(KERN_INFO "ide: disallowing DMA for %s\n", drive->name); + drive->nodma = 1; + } + if (ide_noflush & (1 << i)) { + printk(KERN_INFO "ide: disabling flush requests for %s\n", + drive->name); + drive->noflush = 1; + } + if (ide_noprobe & (1 << i)) { + printk(KERN_INFO "ide: skipping probe for %s\n", drive->name); + drive->noprobe = 1; + } + if (ide_nowerr & (1 << i)) { + printk(KERN_INFO "ide: ignoring the WRERR_STAT bit for %s\n", + drive->name); + drive->bad_wstat = BAD_R_STAT; + } + if (ide_cdroms & (1 << i)) { + printk(KERN_INFO "ide: forcing %s as a CD-ROM\n", drive->name); + drive->present = 1; + drive->media = ide_cdrom; + /* an ATAPI device ignores DRDY */ + drive->ready_stat = 0; + } + if (ide_disks & (1 << i)) { + drive->cyl = drive->bios_cyl = ide_disks_chs[i].cyl; + drive->head = drive->bios_head = ide_disks_chs[i].head; + drive->sect = drive->bios_sect = ide_disks_chs[i].sect; + drive->forced_geom = 1; + printk(KERN_INFO "ide: forcing %s as a disk (%d/%d/%d)\n", + drive->name, + drive->cyl, drive->head, drive->sect); + drive->present = 1; + drive->media = ide_disk; + drive->ready_stat = READY_STAT; + } +} + +static unsigned int ide_ignore_cable; + +static int ide_set_ignore_cable(const char *s, struct kernel_param *kp) +{ + int i, j = 1; + + if (sscanf(s, "%d:%d", &i, &j) != 2 && sscanf(s, "%d", &i) != 1) + return -EINVAL; + + if (i >= MAX_HWIFS || j < 0 || j > 1) + return -EINVAL; + + if (j) + ide_ignore_cable |= (1 << i); + else + ide_ignore_cable &= (1 << i); + + return 0; +} + +module_param_call(ignore_cable, ide_set_ignore_cable, NULL, NULL, 0); +MODULE_PARM_DESC(ignore_cable, "ignore cable detection"); + +void ide_port_apply_params(ide_hwif_t *hwif) +{ + int i; + + if (ide_ignore_cable & (1 << hwif->index)) { + printk(KERN_INFO "ide: ignoring cable detection for %s\n", + hwif->name); + hwif->cbl = ATA_CBL_PATA40_SHORT; + } + + for (i = 0; i < MAX_DRIVES; i++) + ide_dev_apply_params(&hwif->drives[i]); +} + /* * This is gets invoked once during initialization, to set *everything* up */ @@ -1305,11 +1346,6 @@ int __init init_module (void) void __exit cleanup_module (void) { - int index; - - for (index = 0; index < MAX_HWIFS; ++index) - ide_unregister(index); - proc_ide_destroy(); class_destroy(ide_port_class); |