diff options
Diffstat (limited to 'drivers/ieee1394/ohci1394.c')
-rw-r--r-- | drivers/ieee1394/ohci1394.c | 140 |
1 files changed, 95 insertions, 45 deletions
diff --git a/drivers/ieee1394/ohci1394.c b/drivers/ieee1394/ohci1394.c index eae97d8..628130a 100644 --- a/drivers/ieee1394/ohci1394.c +++ b/drivers/ieee1394/ohci1394.c @@ -468,7 +468,6 @@ static int get_nb_iso_ctx(struct ti_ohci *ohci, int reg) /* Global initialization */ static void ohci_initialize(struct ti_ohci *ohci) { - char irq_buf[16]; quadlet_t buf; int num_ports, i; @@ -586,11 +585,10 @@ static void ohci_initialize(struct ti_ohci *ohci) reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_linkEnable); buf = reg_read(ohci, OHCI1394_Version); - sprintf (irq_buf, "%d", ohci->dev->irq); - PRINT(KERN_INFO, "OHCI-1394 %d.%d (PCI): IRQ=[%s] " + PRINT(KERN_INFO, "OHCI-1394 %d.%d (PCI): IRQ=[%d] " "MMIO=[%llx-%llx] Max Packet=[%d] IR/IT contexts=[%d/%d]", ((((buf) >> 16) & 0xf) + (((buf) >> 20) & 0xf) * 10), - ((((buf) >> 4) & 0xf) + ((buf) & 0xf) * 10), irq_buf, + ((((buf) >> 4) & 0xf) + ((buf) & 0xf) * 10), ohci->dev->irq, (unsigned long long)pci_resource_start(ohci->dev, 0), (unsigned long long)pci_resource_start(ohci->dev, 0) + OHCI1394_REGISTER_SIZE - 1, ohci->max_packet_size, @@ -3217,6 +3215,18 @@ static int __devinit ohci1394_pci_probe(struct pci_dev *dev, struct ti_ohci *ohci; /* shortcut to currently handled device */ resource_size_t ohci_base; +#ifdef CONFIG_PPC_PMAC + /* Necessary on some machines if ohci1394 was loaded/ unloaded before */ + if (machine_is(powermac)) { + struct device_node *ofn = pci_device_to_OF_node(dev); + + if (ofn) { + pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, ofn, 0, 1); + pmac_call_feature(PMAC_FTR_1394_ENABLE, ofn, 0, 1); + } + } +#endif /* CONFIG_PPC_PMAC */ + if (pci_enable_device(dev)) FAIL(-ENXIO, "Failed to enable OHCI hardware"); pci_set_master(dev); @@ -3505,17 +3515,14 @@ static void ohci1394_pci_remove(struct pci_dev *pdev) #endif #ifdef CONFIG_PPC_PMAC - /* On UniNorth, power down the cable and turn off the chip - * clock when the module is removed to save power on - * laptops. Turning it back ON is done by the arch code when - * pci_enable_device() is called */ - { - struct device_node* of_node; + /* On UniNorth, power down the cable and turn off the chip clock + * to save power on laptops */ + if (machine_is(powermac)) { + struct device_node* ofn = pci_device_to_OF_node(ohci->dev); - of_node = pci_device_to_OF_node(ohci->dev); - if (of_node) { - pmac_call_feature(PMAC_FTR_1394_ENABLE, of_node, 0, 0); - pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, of_node, 0, 0); + if (ofn) { + pmac_call_feature(PMAC_FTR_1394_ENABLE, ofn, 0, 0); + pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, ofn, 0, 0); } } #endif /* CONFIG_PPC_PMAC */ @@ -3529,59 +3536,102 @@ static void ohci1394_pci_remove(struct pci_dev *pdev) } #ifdef CONFIG_PM -static int ohci1394_pci_resume (struct pci_dev *pdev) -{ -/* PowerMac resume code comes first */ -#ifdef CONFIG_PPC_PMAC - if (machine_is(powermac)) { - struct device_node *of_node; - - /* Re-enable 1394 */ - of_node = pci_device_to_OF_node (pdev); - if (of_node) - pmac_call_feature (PMAC_FTR_1394_ENABLE, of_node, 0, 1); - } -#endif /* CONFIG_PPC_PMAC */ - - pci_set_power_state(pdev, PCI_D0); - pci_restore_state(pdev); - return pci_enable_device(pdev); -} - -static int ohci1394_pci_suspend (struct pci_dev *pdev, pm_message_t state) +static int ohci1394_pci_suspend(struct pci_dev *pdev, pm_message_t state) { int err; + struct ti_ohci *ohci = pci_get_drvdata(pdev); printk(KERN_INFO "%s does not fully support suspend and resume yet\n", OHCI1394_DRIVER_NAME); + if (!ohci) { + printk(KERN_ERR "%s: tried to suspend nonexisting host\n", + OHCI1394_DRIVER_NAME); + return -ENXIO; + } + DBGMSG("suspend called"); + + /* Clear the async DMA contexts and stop using the controller */ + hpsb_bus_reset(ohci->host); + + /* See ohci1394_pci_remove() for comments on this sequence */ + reg_write(ohci, OHCI1394_ConfigROMhdr, 0); + reg_write(ohci, OHCI1394_BusOptions, + (reg_read(ohci, OHCI1394_BusOptions) & 0x0000f007) | + 0x00ff0000); + reg_write(ohci, OHCI1394_IntMaskClear, 0xffffffff); + reg_write(ohci, OHCI1394_IntEventClear, 0xffffffff); + reg_write(ohci, OHCI1394_IsoXmitIntMaskClear, 0xffffffff); + reg_write(ohci, OHCI1394_IsoXmitIntEventClear, 0xffffffff); + reg_write(ohci, OHCI1394_IsoRecvIntMaskClear, 0xffffffff); + reg_write(ohci, OHCI1394_IsoRecvIntEventClear, 0xffffffff); + set_phy_reg(ohci, 4, ~0xc0 & get_phy_reg(ohci, 4)); + reg_write(ohci, OHCI1394_LinkControlClear, 0xffffffff); + ohci_devctl(ohci->host, RESET_BUS, LONG_RESET_NO_FORCE_ROOT); + ohci_soft_reset(ohci); + err = pci_save_state(pdev); if (err) { - printk(KERN_ERR "%s: pci_save_state failed with %d\n", - OHCI1394_DRIVER_NAME, err); + PRINT(KERN_ERR, "pci_save_state failed with %d", err); return err; } err = pci_set_power_state(pdev, pci_choose_state(pdev, state)); -#ifdef OHCI1394_DEBUG if (err) - printk(KERN_DEBUG "%s: pci_set_power_state failed with %d\n", - OHCI1394_DRIVER_NAME, err); -#endif /* OHCI1394_DEBUG */ + DBGMSG("pci_set_power_state failed with %d", err); /* PowerMac suspend code comes last */ #ifdef CONFIG_PPC_PMAC if (machine_is(powermac)) { - struct device_node *of_node; + struct device_node *ofn = pci_device_to_OF_node(pdev); - /* Disable 1394 */ - of_node = pci_device_to_OF_node (pdev); - if (of_node) - pmac_call_feature(PMAC_FTR_1394_ENABLE, of_node, 0, 0); + if (ofn) + pmac_call_feature(PMAC_FTR_1394_ENABLE, ofn, 0, 0); } #endif /* CONFIG_PPC_PMAC */ return 0; } + +static int ohci1394_pci_resume(struct pci_dev *pdev) +{ + int err; + struct ti_ohci *ohci = pci_get_drvdata(pdev); + + if (!ohci) { + printk(KERN_ERR "%s: tried to resume nonexisting host\n", + OHCI1394_DRIVER_NAME); + return -ENXIO; + } + DBGMSG("resume called"); + +/* PowerMac resume code comes first */ +#ifdef CONFIG_PPC_PMAC + if (machine_is(powermac)) { + struct device_node *ofn = pci_device_to_OF_node(pdev); + + if (ofn) + pmac_call_feature(PMAC_FTR_1394_ENABLE, ofn, 0, 1); + } +#endif /* CONFIG_PPC_PMAC */ + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + err = pci_enable_device(pdev); + if (err) { + PRINT(KERN_ERR, "pci_enable_device failed with %d", err); + return err; + } + + /* See ohci1394_pci_probe() for comments on this sequence */ + ohci_soft_reset(ohci); + reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_LPS); + reg_write(ohci, OHCI1394_IntEventClear, 0xffffffff); + reg_write(ohci, OHCI1394_IntMaskClear, 0xffffffff); + mdelay(50); + ohci_initialize(ohci); + + return 0; +} #endif /* CONFIG_PM */ #define PCI_CLASS_FIREWIRE_OHCI ((PCI_CLASS_SERIAL_FIREWIRE << 8) | 0x10) |